Search Results

Search found 1516 results on 61 pages for 'cards'.

Page 6/61 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• Does the size of monitor Matters ?

  - by Arsheep

  I have a old computer , i want to buy a big LCD now the best i can found is Viewsonic's 24" lcd TFT monitor . So will it run without any problems or i need to upgrade the video cards or something too ? The computer is not that much old it has P4 bord and celeron processor with 128 graphics memory . And in properties it shows i can maximum use 1280 x 1024 resolution. I am noob hardware wise So need help on this stuff. Thanks

  Read the article

• Does the size of monitor Matters ?

  - by Arsheep

  I have a old computer , i want to buy a big LCD now the best i can found is Viewsonic's 24" lcd TFT monitor . So will it run without any problems or i need to upgrade the video cards or something too ? The computer is not that much old it has P4 bord and celeron processor with 128 graphics memory . And in properties it shows i can maximum use 1280 x 1024 resolution. I am noob hardware wise So need help on this stuff. Thanks

  Read the article

• How to enable dual monitors with two ATI Radeon 4350 HD graphics cards?

  - by Christophski

  I have bought two ATI Radeon 4350 HD graphics cards and they both work well seperately. But only the first one will output most of the time. If I go to System - Appearance - Monitors it will only detect the monitor on the first graphics card. I have check using hardinfo and the system has definitely detecting both of the graphics cards so I don't know why it isn't detecting the monitor. I am running Maverick 64 bit

  Read the article

• mvc design in a card game

  - by Hong

  I'm trying to make a card game. some classes I have are: CardModel, CardView; DeckModel, DeckView. The deck model has a list of card model, According to MVC, if I want to send a card to a deck, I can add the card model to the deck model, and the card view will be added to the deck view by a event handler. So I have a addCard(CardModel m) in the DeckModel class, but if I want to send a event to add the card view of that model to the deck view, I only know let the model has a reference to view. So the question is: If the card model and deck model have to have a reference to their view classes to do it? If not, how to do it better? Update, the code: public class DeckModel { private ArrayList<CardModel> cards; private ArrayList<EventHandler> actionEventHandlerList; public void addCard(CardModel card){ cards.add(card); //processEvent(event x); //must I pass a event that contain card view here? } CardModel getCards(int index){ return cards.get(index); } public synchronized void addEventHandler(EventHandler l){ if(actionEventHandlerList == null) actionEventHandlerList = new ArrayList<EventHandler>(); if(!actionEventHandlerList.contains(l)) actionEventHandlerList.add(l); } public synchronized void removeEventHandler(EventHandler l){ if(actionEventHandlerList!= null && actionEventHandlerList.contains(l)) actionEventHandlerList.remove(l); } private void processEvent(Event e){ ArrayList list; synchronized(this){ if(actionEventHandlerList!= null) list = (ArrayList)actionEventHandlerList.clone(); else return; } for(int i=0; i<actionEventHandlerList.size(); ++i){ actionEventHandlerList.get(i).handle(e); } } }

  Read the article

• Cryptography for P2P card game

  - by zephyr

  I'm considering writing a computer adaptation of a semi-popular card game. I'd like to make it function without a central server, and I'm trying to come up with a scheme that will make cheating impossible without having to trust the client. The basic problem as I see it is that each player has a several piles of cards (draw deck, current hand and discard deck). It must be impossible for either player to alter the composition of these piles except when allowed by the game rules (ie drawing or discarding cards), nor should players be able to know what is in their or their oppponent's piles. I feel like there should be some way to use something like public-key cryptography to accomplish this, but I keep finding holes in my schemes. Can anyone suggest a protocol or point me to some resources on this topic? [Edit] Ok, so I've been thinking about this a bit more, and here's an idea I've come up with. If you can poke any holes in it please let me know. At shuffle time, a player has a stack of cards whose value is known to them. They take these values, concatenate a random salt to each, then hash them. They record the salts, and pass the hashes to their opponent. The opponent concatenates a salt of their own, hashes again, then shuffles the hashes and passes the deck back to the original player. I believe at this point, the deck has been randomized and neither player can have any knowledge of the values. However, when a card is drawn, the opponent can reveal their salt, allowing the first player to determine what the original value is, and when the card is played the player reveals their own salt, allowing the opponent to verify the card value.

  Read the article

• USB 2.0 Options for board with USB 1.1

  - by Wesley

  Hi all, I have a QDI Superb 4 board and, by default, it supports USB 1.1. However, I want it to support USB 2.0. How can I go about doing this? I know there are PCI expansion cards with USB 2.0 and there are also 3.5" floppy replacement panels with USB 2.0. Will these be supported by the board or will it be downgraded to USB 1.1? If so, are there better options than those already mentioned? Thanks in advance.

  Read the article

• ISA bus on newer computers

  - by Kevin Ivarsen

  Are there companies that sell new computers that support old ISA bus expansion cards? We have an aging computer running DOS that operates some machinery via an ISA interface board. Updated versions of this board (e.g. PCI, USB) are not available, and I am concerned about the long-term reliability of the 8+ year old computers we currently keep around as backups. If these newer ISA-capable machines exist, are there any general gotchas to be aware of in terms of compatibility with older expansion boards, ability to run DOS, etc.?

  Read the article

• Does the size of the monitor Matter?

  - by Arsheep

  I have a old computer, and I want to buy a big LCD. The best I've found so far is Viewsonic's 24" LCD TFT monitor. So will it run without any problems, or do I need to upgrade the video cards or something as well? The computer is not too old: it has P4 board and celeron processor, with 128 graphics memory. And in display properties, it says that the maxium that I can use is 1280 x 1024 resolution. I am noob hardware-wise, so need help on this stuff. Thanks

  Read the article

• Does the size of the monitor Matter?

  - by Arsheep

  I have a old computer, and I want to buy a big LCD. The best I've found so far is Viewsonic's 24" LCD TFT monitor. So will it run without any problems, or do I need to upgrade the video cards or something as well? The computer is not too old: it has P4 board and celeron processor, with 128 graphics memory. And in display properties, it says that the maxium that I can use is 1280 x 1024 resolution. I am noob hardware-wise, so need help on this stuff. Thanks

  Read the article

• Does the size of the monitor Matter?

  - by Arsheep

  I have a old computer, and I want to buy a big LCD. The best I've found so far is Viewsonic's 24" LCD TFT monitor. So will it run without any problems, or do I need to upgrade the video cards or something as well? The computer is not too old: it has P4 board and celeron processor, with 128 graphics memory. And in display properties, it says that the maxium that I can use is 1280 x 1024 resolution. I am noob hardware-wise, so need help on this stuff. Thanks

  Read the article

• SQL – What is the latest Version of NuoDB? – A Quick Contest to Get Amazon Gift Cards

  - by Pinal Dave

  We had a great contest earlier last week - What ACID stands in the Database? – Contest to Win 24 Amazon Gift Cards and Joes 2 Pros 2012 Kit. It has received quite a few responses. Just like any other contest, not everyone was winner. The kind folks at NuoDB decided to give another chance to everyone who have not won in the last contest. This means if you have missed to take part in the earlier contest or if you have taken part and not won, you still have one more chance to win Amazon Gift Card. Here is the quick contest: You just have to go and download NuoDB. The first 10 people who will download the NuoDB will get 10 – USD 10 cards. Remaining everyone will be entered into a lucky draw of Amazon Gift cards of USD 50. Winners will be announced in next 24 hours. Bonus Round: If you have entered in the contest above, you can also enter to win latest Beginning SSRS Joes 2 Pros book. You just have to leave a comment over here with your experience about your experience with NuoDB and what is the latest version of the product. Here are few of the blog post I wrote earlier on that subject: Part 1 – Install NuoDB in 90 Seconds Part 2 – Manage NuoDB Installation Part 3 – Explore NuoDB Database Part 4 – Migrate from SQL Server to NuoDB Part 5 - NuoDB and Third Party Explorer – SQuirreL SQL Client, SQL Workbench/J and DbVisualizer Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Blackjack game reshuffling problem

  - by Jam

  I am trying to make a blackjack game where before each new round, the program checks to make sure that the deck has 7 cards per player. And if it doesn't, the deck clears, repopulates, and reshuffles. I have most of the problem down, but for some reason at the start of every deal it reshuffles the deck more than once, and I can't figure out why. Help, please. Here's what I have so far: (P.S. the imported cards and games modules aren't part of the problem, I'm fairly sure my problem lies in the deal() function of my BJ_Deck class.) import cards, games class BJ_Card(cards.Card): """ A Blackjack Card. """ ACE_VALUE = 1 def get_value(self): if self.is_face_up: value = BJ_Card.RANKS.index(self.rank) + 1 if value > 10: value = 10 else: value = None return value value = property(get_value) class BJ_Deck(cards.Deck): """ A Blackjack Deck. """ def populate(self): for suit in BJ_Card.SUITS: for rank in BJ_Card.RANKS: self.cards.append(BJ_Card(rank, suit)) def deal(self, hands, per_hand=1): for rounds in range(per_hand): for hand in hands: if len(self.cards)>=7*(len(hands)): top_card=self.cards[0] self.give(top_card, hand) else: print "Reshuffling the deck." self.cards=[] self.populate() self.shuffle() top_card=self.cards[0] self.give(top_card, hand) class BJ_Hand(cards.Hand): """ A Blackjack Hand. """ def init(self, name): super(BJ_Hand, self).init() self.name = name def __str__(self): rep = self.name + ":\t" + super(BJ_Hand, self).__str__() if self.total: rep += "(" + str(self.total) + ")" return rep def get_total(self): # if a card in the hand has value of None, then total is None for card in self.cards: if not card.value: return None # add up card values, treat each Ace as 1 total = 0 for card in self.cards: total += card.value # determine if hand contains an Ace contains_ace = False for card in self.cards: if card.value == BJ_Card.ACE_VALUE: contains_ace = True # if hand contains Ace and total is low enough, treat Ace as 11 if contains_ace and total <= 11: # add only 10 since we've already added 1 for the Ace total += 10 return total total = property(get_total) def is_busted(self): return self.total > 21 class BJ_Player(BJ_Hand): """ A Blackjack Player. """ def is_hitting(self): response = games.ask_yes_no("\n" + self.name + ", do you want a hit? (Y/N): ") return response == "y" def bust(self): print self.name, "busts." self.lose() def lose(self): print self.name, "loses." def win(self): print self.name, "wins." def push(self): print self.name, "pushes." class BJ_Dealer(BJ_Hand): """ A Blackjack Dealer. """ def is_hitting(self): return self.total < 17 def bust(self): print self.name, "busts." def flip_first_card(self): first_card = self.cards[0] first_card.flip() class BJ_Game(object): """ A Blackjack Game. """ def init(self, names): self.players = [] for name in names: player = BJ_Player(name) self.players.append(player) self.dealer = BJ_Dealer("Dealer") self.deck = BJ_Deck() self.deck.populate() self.deck.shuffle() def get_still_playing(self): remaining = [] for player in self.players: if not player.is_busted(): remaining.append(player) return remaining # list of players still playing (not busted) this round still_playing = property(get_still_playing) def __additional_cards(self, player): while not player.is_busted() and player.is_hitting(): self.deck.deal([player]) print player if player.is_busted(): player.bust() def play(self): # deal initial 2 cards to everyone self.deck.deal(self.players + [self.dealer], per_hand = 2) self.dealer.flip_first_card() # hide dealer's first card for player in self.players: print player print self.dealer # deal additional cards to players for player in self.players: self.__additional_cards(player) self.dealer.flip_first_card() # reveal dealer's first if not self.still_playing: # since all players have busted, just show the dealer's hand print self.dealer else: # deal additional cards to dealer print self.dealer self.__additional_cards(self.dealer) if self.dealer.is_busted(): # everyone still playing wins for player in self.still_playing: player.win() else: # compare each player still playing to dealer for player in self.still_playing: if player.total > self.dealer.total: player.win() elif player.total < self.dealer.total: player.lose() else: player.push() # remove everyone's cards for player in self.players: player.clear() self.dealer.clear() def main(): print "\t\tWelcome to Blackjack!\n" names = [] number = games.ask_number("How many players? (1 - 7): ", low = 1, high = 8) for i in range(number): name = raw_input("Enter player name: ") names.append(name) print game = BJ_Game(names) again = None while again != "n": game.play() again = games.ask_yes_no("\nDo you want to play again?: ") main() raw_input("\n\nPress the enter key to exit.")

  Read the article

• OS8- AK8- The bad news...

  - by Steve Tunstall

  Ok I told you I would give you the bad news of AK8 to go along with all the cool new stuff, so here it is. It's not that bad, really, just things you need to be aware of. First, the 2013.1 code is being called OS8, AK8 and 2013.1 by different people. I mean different people INSIDE Oracle!! It was supposed to be easy, but it never is. So for the rest of this blog entry, I'm calling it AK8. AK8 is not compatible with the 7x10 series. Ever. The 7x10 series is not supported with AK8, and if you try to upgrade one, it will fail at the healthcheck. All 7x20 series, all of them regardless of age, are supported with AK8. Drive trays. Let's talk about drive trays and SAS cards. The older drive trays for the 7x20 series were called the "Riverwalk 2" or "DS2" trays. They were technically the "J4410" series JBODs that Sun used to sell a la carte before we stopped selling JBODs. Don't get me started on that, it still makes me mad. We used these for many years, and you can still buy them right now until December 15th, 2013, when they will no longer be sold. The DS2 tray only came as a 4u, 24 drive shelf. It held 3.5" drives, and you had a choice of 2TB, 3TB, 300GB or 600GB drives. The SAS HBA in the 7x20 series was called a "Thebe" card, with a part # of 7105394. The 7420, for example, came standard with two of these "Thebe" cards for connecting to the disk trays. Two Thebe cards could handle up to 12 trays, so one would add two more cards to go to 24 trays, or have up to six Thebe cards to handle 36 trays. This card was for external SAS only. It did not connect to the internal OS drives or the Readzillas, both of which used the internal SCSI controller of the server. These Riverwalk 2 trays ARE supported with AK8. You can upgrade your older 7420 or 7320, no problem, as-is. The much older Riverwalk 1 trays or J4400 trays are NOT supported by AK8. However, they were only used by the 7x10 series, and we already said that the 7x10 series was not supported. Here's where it gets tricky. Since last January, we have been selling the new style disk trays. We call them the "DE2-24P" and the "DE2-24C" trays. The "C" tray is for capacity drives, which are 3.5" 3TB or 4TB drives. The "P" trays are for performance drives, which are 2.5" 300GB and 900GB drives. These trays are NOT Riverwalk 2 trays, even though the "C" series may kind of look like it. Different manufacturer and different firmware. They are not new. Like I said, we've been selling them with the 7x20 series since last January. They are the only disk trays we will be selling going forward. Of course, AK8 supports them. So what's the problem? The problem is going to be for people who have to mix drive trays. Remember, your older 7x20 series has Thebe SAS2 HBAs. These have 2 SAS ports per card.  The new ZS3-2 and ZS3-4 systems, however, have the new "Thebe2" SAS2 HBAs. These Thebe2 cards have 4 ports per card. This is very cool, as we can now do more SAS channels with less cards. Instead of needing 4 SAS cards to grow to 24 trays like we did with the old Thebe cards, I can now do 24 trays with only 2 Thebe2 cards. This means more IO slots for fun things like Infiniband and 10G. So far, so good, right? These Thebe2 cards work with any disk tray. You can even mix older DS2 trays with the newer DE2 trays in the same system, as long as you have Thebe2 cards. Ah, there's your problem. You don't have Thebe2 cards in your old 7420, do you? Well, I told you the bad news wasn't that bad, right? We can take out your Thebe cards and replace them with Thebe2. You can then plug your older DS2 trays right back in, and also now get newer DE2 trays going forward. However, it's important that the trays are on different SAS channels. You can mix them in the same system, but not on the same channel. Ask your local SC if you need help with the new cable layout. By the way, the new ZS3-2 and ZS3-4 systems also include a new IO card called "Erie" cards. These are for INTERNAL SAS to the OS drives and the Readzillas. So those are now SAS2 instead of SATA like the older models. Yes, the Erie card uses an IO slot, but that's OK, because the Thebe2 cards allow us to use less SAS HBAs to grow the system, right? That's it. Not too much bad news and really not that bad. AK8 does not support the 7x10 series, and you may need new Thebe2 cards in your older systems if you want to add on newer DE2 trays. I think we can all agree that there are worse things out there. Like our Congress.   Next up.... More good news and cool AK8 tricks. Such as virtual NICS. 

  Read the article

• Handling credit cards and IOS

  - by Susan Jackie

  I am using NSUrlConnection asyncronous request to transmit credit card information to a secure third party server. I do the following: I get the credit card number, cvv, etc from the uitextfields. Encode the credit card information into a json format. Set as httpd body of the nsurlconnection request as follows: NSURL * url = [[NSURL URLWithString: "https://www.example.com"]; NSMutableURLRequest * request = [[NSMutableURLRequest alloc] initWithURL: url]; [request setHTTPMethod: @"POST"]; [request setValue:@"application/json" forHTTPHeaderField:@"Accept"]; [request setValue:@"application/json" forHTTPHeaderField:@"Content-Type"]; [request setHTTPBody: [NSJSONSerialization dataWithJSONObject: params options: kNilOptions error: &parseError]]; Send this information via asynchronous request to a secure third party server: [NSURLConnection sendAsynchronousRequest:request queue: queue completionHandler:^(NSURLResponse *response, NSData *data, NSError * requestError) { What should I be considering to send user credit card information to a third party server using nsurlconnection asynchronous request?

  Read the article

• Does Windows 7 support multiple simultaneous nVidia graphics cards with different drivers?

  - by mckenzieg1

  On one of my dev machines at work (currently running XP), I have two nVidia graphics cards: Quadro NVS 440 (my original card, for my three primary monitors) GeForce GTX 275 (just added, for CUDA development) I can get both cards to work OK by installing the latest GeForce drivers, but I get some annoying-but-not-crippling display artifacts on the Quadro's screens (mostly scattered black rectanges where repainting fails for a few bits of UI in certain applications). Under XP, this seems to be the best I can do. I can use Device Manager to supposedly install different nVidia drivers for the two cards (the latest Quadro drivers for the NVS, the latest GeForce drivers for the GTX), but I actually end up with the same driver for both, because the driver dlls all have the same names and get installed on top of one another in the system directory. I have read that Win7 has a new video driver architecture that better supports multiple heterogeneous cards. Does anyone know if that will handle my scenario? If so, it will give me a compelling reason to get that machine on Win7 ASAP.

  Read the article

• Simulating 3D 'cards' with just orthographic rendering

  - by meds

  I am rendering textured quads from an orthographic perspective and would like to simulate 'depth' by modifying UVs and the vertex positions of the quads four points (top left, top right, bottom left, bottom right). I've found if I make the top left and bottom right corners y position be the same I don't get a linear 'skew' but rather a warped one where the texture covering the top triangle (which makes up the quad) seems to get squashed while the bottom triangles texture looks normal. I can change UVs, any of the four points on the quad (but only in 2D space, it's orthographic projection anyway so 3D space won't matter much). So basically I'm trying to simulate perspective on a two dimensional quad in orthographic projection, any ideas? Is it even mathematically possible/feasible? ideally what I'd like is a situation where I can set an x/y rotation as well as a virtual z 'position' (which simulates z depth) through a function and see it internally calclate the positions/uvs to create the 3D effect. It seems like this should all be mathematical where a set of 2D transforms can be applied to each corner of the quad to simulate depth, I just don't know how to make it happen. I'd guess it requires trigonometry or something, I'm trying to crunch the math but not making much progress. here's what I mean: Top left is just the card, center is the card with a y rotation of X degrees and right most is a card with an x and y rotation of different degrees.

  Read the article

• motherboard, network cards, ports, printer detection tools for .net

  - by tanieboy4u

  does anybody have a hardware detection api for .net?

  Read the article

• Smart Cards Development

  - by user292395

  I need a 'java' source code on how to extract a cap file from the computer and divide it into blocks in order to send it using APDUs to the smart card to install or load or delete an application. Thanks in advance.

  Read the article

• Validating "Visa Debit" cards in ActiveMerchant

  - by robw

  How can I correctly validate a Visa Debit card in ActiveMerchant? At the moment, the card fails to validate despite it being a valid card number. I have tried using :visa, :visa_debit and nil card types.

  Read the article

• Solr 'text' fields not accepting wild-cards

  - by MarcoPolo

  Hi, I am trying to search on a field declared as 'text' using the wildcard '*' but am getting mixed results. Basically, it seems to me that it's stripping off the '*' character and isn't handling numbers or spaces well. I'm using the 'text' field type for case insensitive fields but after running an analysis, am starting to think itmight be the wrong type to use as it runs a lot more filters when compared with the string field. Basically all I want is a field type that can index or search on lowercase only with spaces stripped out (and works with wildcards). Is such a type available? Thanks MARCO

  Read the article

• Switching Between Cards in a CardLayout using getParent()

  - by plutoisaplanet

  Hey everyone, I am writing an application where I am using the CardLayout to swap between two panels that are placed right on top of one another. There's a JPanel called Top, and it's layout is the CardLayout. Inside this JPanel is a JPanel called CMatch. Whenever the user clicks the submit button in the CMatch panel, I want a new JPanel added to Top that is custom built based on what the user types in, and it will be shown instead of the original CMatch panel. All of this done using the CardLayout. These are all different classes in different files, however (the panel Top with CardLayout, the panel CMatch that is inside the Top panel, and the custom built panel). So i tried using the following to add the new panel to the Top panel and then have it shown: (this code takes place in the CMatch class): private void submitButtionActionPerformed(ActionEvent e) { CardLayout cl = (CardLayout)(this.getParent().getLayout()); cl.addLayoutComponent(new CChoice(), "college_choices"); cl.show(this.getParent(), "college_choices"); } However, this didn't work. So i was wondering, what am I doing wrong? Any advice is greatly appreciated, thanks!

  Read the article

• Android: implementing sliding cards in widget

  - by DroidIn.net

  I have a widget that periodically updates itself (hourly) to display top result of search query. I would like to extend it so it captures several top results and then loops through these. The best example would be Genie News and Weather widget for which I was unable to find a source code. QUESTIONS: What would be a good way to implement the animation? I'm thinking ViewAnimator + timer, but is there maybe a better way, say FrameLayout + alerts? I'm already using AlertManager to periodically pull search results for the widget How bad such arraignment would affect phone's battery life?

  Read the article

• How to make the constructor for the following exercise in c++?

  - by user40630

  This is the exercise I?m trying to solve. It's from C++, How to program book from Deitel and it's my homework. (Card Shuffling and Dealing) Create a program to shuffle and deal a deck of cards. The program should consist of class Card, class DeckOfCards and a driver program. Class Card should provide: a) Data members face and suit of type int. b) A constructor that receives two ints representing the face and suit and uses them to initialize the data members. c) Two static arrays of strings representing the faces and suits. d) A toString function that returns the Card as a string in the form “face of suit.” You can use the + operator to concatenate strings. Class DeckOfCards should contain: a) A vector of Cards named deck to store the Cards. b) An integer currentCard representing the next card to deal. c) A default constructor that initializes the Cards in the deck. The constructor should use vector function push_back to add each Card to the end of the vector after the Card is created and initialized. This should be done for each of the 52 Cards in the deck. d) A shuffle function that shuffles the Cards in the deck. The shuffle algorithm should iterate through the vector of Cards. For each Card, randomly select another Card in the deck and swap the two Cards. e) A dealCard function that returns the next Card object from the deck. f) A moreCards function that returns a bool value indicating whether there are more Cards to deal. The driver program should create a DeckOfCards object, shuffle the cards, then deal the 52 cards. The problem I'm facing is that I don't know exactly how to make the constructor for the second class. See description commented in the code bellow. #include <iostream> #include <vector> using namespace std; /* * */ //Class card. No problems here. class Card { public: Card(int, int); string toString(); private: int suit, face; static string faceNames[13]; static string suitNames[4]; }; string Card::faceNames[13] = {"Ace","Two","Three","Four","Five","Six","Seven","Eight","Nine","Ten","Queen","Jack","King"}; string Card::suitNames[4] = {"Diamonds","Clubs","Hearts","Spades"}; string Card::toString() { return faceNames[face]+" of "+suitNames[suit]; } Card::Card(int f, int s) :face(f), suit(s) { } /*The problem begins here. This class should create(when and object for it is created) a copy of the vector deck, right? But how exactly are these vector cards be initialized? I'll explain better in the constructor definition bellow.*/ class DeckOfCards { public: DeckOfCards(); void shuffleCards(); Card dealCard(); bool moreCards(); private: vector<Card> deck(52); int currentCard; }; int main(int argc, char** argv) { return 0; } DeckOfCards::DeckOfCards() { //This is where I'm stuck. I can't figure out how to set each of the 52 cards of the vector deck to have a specific suit and face every one of them, by using only the constructor of the Card class. //What you see bellow was one of my attempts to solve this problem but I blocked pretty soon in the middle of it. for(int i=0; i<deck.size(); i++) { deck[i]//....There is no function to set them. They must be set when initialized. But how?? } } For easier reading: http://pastebin.com/pJeXMH0f

  Read the article

• How can I use two video cards to power three screens?

  - by notatoad

  I have two Radeon 6450 graphics cards in my computer, with three screens. Only the screens plugged into the first graphics card are recognized and configurable in the displays setting panel. How can I use the displays plugged into my second graphics card? Both cards are present in lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc NI Caicos [AMD RADEON HD 6450] 01:00.1 Audio device: ATI Technologies Inc NI Caicos HDMI Audio [AMD RADEON HD 6450] 02:00.0 VGA compatible controller: ATI Technologies Inc NI Caicos [AMD RADEON HD 6450] 02:00.1 Audio device: ATI Technologies Inc NI Caicos HDMI Audio [AMD RADEON HD 6450] I'm using the open source driver instead of the proprietary driver because the proprietary driver won't output 1440x2560.

  Read the article

• Using all Ten IO slots on a 7420

  - by user12620172

  So I had the opportunity recently to actually use up all ten slots in a clustered 7420 system. This actually uses 20 slots, or 22 if you count the clusteron card. I thought it was interesting enough to share here. This is at one of my clients here in southern California. You can see the picture below. We have four SAS HBAs instead of the usual two. This is becuase we wanted to split up the back-end taffic for different workloads. We have a set of disk trays coming from two SAS cards for nothing but Exadata backups. Then, we have a different set of disk trays coming off of the other two SAS cards for non-Exadata workloads, such as regular user file storage. We have 2 Infiniband cards which allow us to do a full mesh directly into the back of the nearby, production Exadata, specifically for fast backups and restores over IB. You can see a 3rd IB card here, which is going to be connected to a non-production Exadata for slower backups and restores from it.The 10Gig card is for client connectivity, allowing other, non-Exadata Oracle databases to make use of the many snapshots and clones that can now be created using the RMAN copies from the original production database coming off the Exadata. This allows for a good number of test and development Oracle databases to use these clones without effecting performance of the Exadata at all.We also have a couple FC HBAs, both for NDMP backups to an Oracle/StorageTek tape library and also for FC clients to come in and use some storage on the 7420.  Now, if you are adding more cards to your 7420, be aware of which cards you can place in which slots. See the bottom graphic just below the photo.  Note that the slots are numbered 0-4 for the first 5 cards, then the "C" slots which is the dedicated Cluster card (called the Clustron), and then another 5 slots numbered 5-9. Some rules for the slots: Slots 1 & 8 are automatically populated with the two default SAS cards. The only other slots you can add SAS cards to are 2 & 7. Slots 0 and 9 can only hold FC cards. Nothing else. So if you have four SAS cards, you are now down to only four more slots for your 10Gig and IB cards. Be sure not to waste one of these slots on a FC card, which can go into 0 or 9, instead.  If at all possible, slots should be populated in this order: 9, 0, 7, 2, 6, 3, 5, 4

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >