Search Results

Search found 150 results on 6 pages for 'ivy'.

Page 6/6 | < Previous Page | 2 3 4 5 6 

  • USB 3.0 hard disk not detected on a particular host controller?

    - by Alvin Wong
    I have a USB 3.0 hard disk which has always been working on my desktop with an XHCI. Now I just bought a notebook with an XHCI (something with Intel's Ivy Bridge setup). The first time I plug the hard disk in its 3.0 port it is detected and working. A few hours later I try to connect it again, but seems that the notebook just ignored it! The light on the hard disk didn't blink as usual (instead it is hold at on). I then tested it with my desktop again and it is working perfectly. It gets trickier when I plug it in the USB 2.0 port of that notebook it is detected and working perfectly (despite the slower speed). Then I try to plug in an USB 2.0 USB flash drive to that USB 3.0 port, and it is detected (of course as USB 2.0). So, there are two USB 3.0 ports on my notebook's XHCI. Both of them are not working with my hard disk but working perfectly fine with my USB 2.0 UFD. What's wrong with it? When I plug in the hard disk, device manager doesn't change. I've tried re-installing the driver for the XHCI, but it changes nothing. Had I broke the USB 3.0-specific pins of both USB 3.0 ports?

    Read the article

  • Stop the constant random reboots of my GIGABYTE GA-B75M-D3V

    - by Frederic
    I've got some issues with a new system. It's rebooting constantly. The system consists of a: brand new: Gigabyte GA-B75M-D3V with F9 BIOS (latest) Intel Core i5-3470 Ivy Bridge 2x 8GB G.SKILL Ripjaws 1600MHz memory (mem-tested x-86) coming from a stable system: Creative Soundcard X-FI Titanium Asus Radeon HD4850 OCZ Vertex 3 120G SSD Sata 3 Hard disk 1TB Sata 2 ASUS Blu-ray Drive PSU 400w Connected peripherals : Toshiba tv (displayport on dvi of MB or HD4850) Wired mouse, wireless keyboard (logitech) Bluetooth usb key Azio main problem : it's not possible to read the errors from the MB. nothing on the manual neither on internet. At the beginning, I received a MB with graphic problems and the problem of rebooting. I RMA'd it. The new one doesn't have any graphic problems. but it's still constantly rebooting. I removed everything except the HD, the sound-card, the blu-ray drive and the wireless keyboard. It's still unexpectdly rebooting. I'm running a test with just the motherboard and the HD. I will update this text after the test. I've got some questions : Somebody have an idea of a test? The PSU could cause that problem? I used it a lot of years with the stable system. Update 1: BTW, if anyone has the same problem, the manual won't say it but you'll need to reset the bios between two tests (the screwdriver on the two pins) if you suspect a problem of compatibility .

    Read the article

  • make pentaho report for ubuntu 11.04

    - by Hendri
    currently i'm trying to install Pentaho Reports for OpenERP which is refer from https://github.com/WillowIT/Pentaho-...rver/build.xml i ever installed on some laptops which is Windows Based and it's working, but currently i'm trying on UBuntu 11.04 OS, it prompted me error like this "error build.xml:18: failed to create task or type.." below is the steps i did : 1. install java-6-openjdk comment : "apt-get install java-6-openjdk" then i set installed java jdk into java_home environment command: "nano /etc/environment" add environment with this new line : JAVA_HOME="/usr/lib/jvm/java-6-openjdk" I install apache ant command : "apt-get install ant" followed by setting the evnironment command: "nano /etc/environment" add environment with this new line : ANT_HOME="/usr/share/ant" try to check installation with command "ant"... I get message like this: Buildfile: build.xml does not exist! Build failed then download java server from https://github.com/WillowIT/Pentaho-...rver/build.xml and then copied to Ubuntu share folder and then on command form, i goto extracted path which is share folder i mentioned and executed command "ant war " and i got error message : BUILD FAILED /share/java_server/build.xml:18: problem: failed to create task or type antlibrg:apacge.ivy.ant:retrieve cause: The name is undefined. Action:Check the spelling. Action:Check that any custom taks/types have been declared Action:Check that any /declarations have taken place. No types or taks have been defined in this namespace yet This appears to be an antlib declaration. Action:Check that the implementing library exists in one of: -/usr/share/ant/lib -/root/.ant/lib -a directory added on the command line with the -lib argument Total time:0 seconds is there any compability issue? or i miss out some steps? i'm in the some project to rush with for reporting, so please help me to solve this issue i look forward to your corporation to help me solve this issue, thanks a lot in advance Thx Best Regards,

    Read the article

  • xrandr fails when 3rd monitor has higher resolution

    - by Pi3cH
    I tried many combinations with xrandr command under lubuntu 12.04 to setup my three monitors DVI (DELL 1) left detected as HDMI1 HDMI (LG E2290) middle detected as HDMI2 VGA (DELL 2) right detected as VGA1 I can get the display with fix 1280x1024 on all the monitors. But once I setup 1280x1024 + 1920x1080 + 1280x1024, I get blank screen on all the monitors. Sometimes it throws crts fail error instead of blanking out. Anyone have similar issues? any solutions/workarounds? P.S. I can setup two monitors using 1280x1280 and 1920x1080 P.S.S. HDMI2 required at least 1920x1080 to display sharp picture. Outputs (it seems graphic card supports up to 8192x8192): xrandr Screen 0: minimum 320 x 200, current 3840 x 1024, maximum 8192 x 8192 VGA1 connected 1280x1024+2560+0 (normal left inverted right x axis y axis) 338mm x 270mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 HDMI1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 HDMI2 connected 1280x1024+1280+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0 + 1680x1050 60.0 1280x1024 75.0 60.0* 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) 3 CRTs (0,1 VGA, 0,1,2 for other HDMI) xrandr --verbose VGA1 connected 1280x1024+2560+0 (0x47) normal (normal left inverted right x axis y axis) 338mm x 270mm Identifier: 0x42 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 0 CRTCs: 0 1 ... HDMI1 connected 1280x1024+0+0 (0x47) normal (normal left inverted right x axis y axis) 376mm x 301mm Identifier: 0x43 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 1 CRTCs: 0 1 2 ... HDMI2 connected 1280x1024+1280+0 (0x47) normal (normal left inverted right x axis y axis) 477mm x 268mm Identifier: 0x44 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 2 CRTCs: 0 1 2 Below command fails: xrandr --output VGA1 --auto --output HDMI2 --auto --left-of VGA1 --output HDMI1 --auto --left-of HDMI2 Below command passes: xrandr --output VGA1 --auto --output HDMI2 --mode 1280x1024 --rate 60.0 --left-of VGA1 --output HDMI1 --auto --left-of HDMI2 Graphic card VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09)

    Read the article

  • High-performance Academic Server [closed]

    - by PHPsmith
    Suppose I want to build a server for the university's academic interests. The server is dedicated only to a site, where users (students and lecturers) just view and fill the academic data. But at a time (e.g. once a semester), about 12,000 students will access the site simultaneously. Due to limitation of resources, I have to build the server using free software (except for the operating system Windows 7, the university has been prepared). The hardware is also limited to the usual 4-core computers (eg, Ivy Bridge Intel Core i7-3770) with approximately 16GB of memory (DDR3 1600 MHz), equipped with an RJ-45 port (Intel 82 579 Gigabit Ethernet). With all these limitations, I have to choose the software (web server, database, etc) are appropriate for this purpose is achieved. I decided to create a site in PHP. Please help me by answering the following questions based on your expertise. (my prime candidate software to consider after googling) Web server which is faster & stable & secure, when implemented and optimized for PHP? And why? (nginx) PHP accelerator which is faster & stable & compatible with the selected web server? And why? (APC with Zend Optimizer+) Database which is faster & stable & secure, when implemented and optimized for selected web server and selected PHP accelerator? (MySQL) Are there any errors that have been or will be happening from my condition is? If there is, please enlighten me? Is there anything else I need to know in order to achieve this goal? If there is, please enlighten me? I understand that the performance also depends on the implementation of source-code program, so I assume it will create a site with the best efficiency (e.g. using AJAX).

    Read the article

  • USB-to-Serial showing gibberish at 115200 Baud

    - by Mose
    I've got a serious problem which drives me crazy because I tried everything I could think of. First of all, I made a video: http://youtu.be/boghkuq7L_s but please read the following text for more information, not only view the video! When using a USB-to-Serial interface everything works as long as I don't go beyond 57600 Baud. At higher rates I only get giberish like this: év.­b0JNLYÆÿ¿iëd0U²(kßÞb! ú]/xscB!ï¯!BoXûÿ1ïâÖCÿ6ÌAnè*íÌC)º¿BíÞØ.C.@ÆÃwHJÂs "YE:ñ.èFðÌCÊ÷ÞÄ !x H w6@BtbHJ ̪ Ì6ì H¾a¿bH.">îvy®;f<ßBÌ p­L¨fæH­E ­þ¼MBÞI What makes the problem so strange is, I exchanged every component and the problem still presists. I tried differtent OSes (Ubuntu, WinXP, Win7, OSX 10.7) with 32 and 64 Bit. I tried USB-to-Serial interface from FTDI and Prolific. I tried reading the output from my Raspberry PI and from an Asterisk Appliance. I changed the cables and the wiring. Nothing helped. In the video I made a example with a old Notebook with native COM and put the USB-to-Serial to the same connection as "sniffer" (only Rx and GND connected) to make sure the output and everything is ok as one can see on the native port. The voltage is ok. Settings for both are 115200 Baud, 8 Bit with 1 Stop and no flow control. Native is ok. USB is messed up. I used the newest drivers and double checked all connections. I have no idea what is wrong here. As I couldn't find anyone describing problems like this I question my long experiance in computer science and think I'm doing some completly wrong... Please help :-/

    Read the article

  • Windows 8 Install Hanging at first white-font boot splash

    - by Omega
    I'm trying to install the Windows 8 preview on my Samsung Series 9 (2012, Ivy Bridge). I've done a bit of a custom scheme with this one: I'm using EFI/UEFI on this system. I've seen no indication that this system supports secure boot (yay!) My SSD is set up with GPT Ubuntu is already installed and working great via UEFI. I'm trying to boot the Windows 8 install from a USB stick via UEFI I don't have access to a CD drive. The problem is that the boot seems to hang at the very first splash screen that looks like this. White windows font, the little beads don't show up. My USB stick has an activity light and it does blink for the first few seconds, but then goes back to it's "nobody is talking to me" idle pulse. What I know: UEFI booting is definitely working. Windows 8 for those few seconds seems to have some kind of access to the USB drive. My Series 9 is running the latest BIOS/firmware. Any idea what I might be able to do to get Windows 8 installed??

    Read the article

  • 3dmark score abnormal

    - by Sean
    I just bought a new laptop. It is core i7 3610QM.(Ivy bridge, 4 core plus hyperthreading), 8G ram, nvidia GT 610M 2GB. The OS is Win7 64bit. I ran 3dmark 11, but the score is frustrating. For 1280*720, the score is P730. It is too low right? I searched online, the score should at least above 1000. Am I right? I never use this software before. I know nvidia has optimus, so I made the laptop in high performance state and white-listed the 3dmark program. But there is no help. I am guessing 3dmark is using i7's graphic module. It cannot transform to nvidia. In the running detail of 3dmark, the graphic card cannot be identified(The row remain blank). Can anybody tell me is this the normal case? If not, can I use some other software to test if my nvidia card is working fine? If this nvidia card cannot work, I will return the new laptop asap. Thanks.

    Read the article

  • Why Cornell University Chose Oracle Data Masking

    - by Troy Kitch
    One of the eight Ivy League schools, Cornell University found itself in the unfortunate position of having to inform over 45,000 University community members that their personal information had been breached when a laptop was stolen. To ensure this wouldn’t happen again, Cornell took steps to ensure that data used for non-production purposes is de-identified with Oracle Data Masking. A recent podcast highlights why organizations like Cornell are choosing Oracle Data Masking to irreversibly de-identify production data for use in non-production environments. Organizations often copy production data, that contains sensitive information, into non-production environments so they can test applications and systems using “real world” information. Data in non-production has increasingly become a target of cyber criminals and can be lost or stolen due to weak security controls and unmonitored access. Similar to production environments, data breaches in non-production environments can cost millions of dollars to remediate and cause irreparable harm to reputation and brand. Cornell’s applications and databases help carry out the administrative and academic mission of the university. They are running Oracle PeopleSoft Campus Solutions that include highly sensitive faculty, student, alumni, and prospective student data. This data is supported and accessed by a diverse set of developers and functional staff distributed across the university. Several years ago, Cornell experienced a data breach when an employee’s laptop was stolen.  Centrally stored backup information indicated there was sensitive data on the laptop. With no way of knowing what the criminal intended, the university had to spend significant resources reviewing data, setting up service centers to handle constituent concerns, and provide free credit checks and identity theft protection services—all of which cost money and took time away from other projects. To avoid this issue in the future Cornell came up with several options; one of which was to sanitize the testing and training environments. “The project management team was brought in and they developed a project plan and implementation schedule; part of which was to evaluate competing products in the market-space and figure out which one would work best for us.  In the end we chose Oracle’s solution based on its architecture and its functionality.” – Tony Damiani, Database Administration and Business Intelligence, Cornell University The key goals of the project were to mask the elements that were identifiable as sensitive in a consistent and efficient manner, but still support all the previous activities in the non-production environments. Tony concludes,  “What we saw was a very minimal impact on performance. The masking process added an additional three hours to our refresh window, but it was well worth that time to secure the environment and remove the sensitive data. I think some other key points you can keep in mind here is that there was zero impact on the production environment. Oracle Data Masking works in non-production environments only. Additionally, the risk of exposure has been significantly reduced and the impact to business was minimal.” With Oracle Data Masking organizations like Cornell can: Make application data securely available in non-production environments Prevent application developers and testers from seeing production data Use an extensible template library and policies for data masking automation Gain the benefits of referential integrity so that applications continue to work Listen to the podcast to hear the complete interview.  Learn more about Oracle Data Masking by registering to watch this SANS Institute Webcast and view this short demo.

    Read the article

  • Tweaking Remote Control (In-Kernel LIRC)

    - by Geoff
    I've recently rebuilt my MythTV box using Mythbuntu 12.04, to take advantage of newer hardware (Ivy Bridge). On my previous build I used lirc to manage the remote, i.e. the mapping of key codes - keypresses - application keys; it was quite a journey to learn it all, and I ended up fairly comfortable with how it all worked. What I have: I have a cheap Chinavasion remote and USB dongle, which I've found several articles on; these largely revolve around working with XBMC (interesting, but I don't think directly applicable) and also around getting a Harmony remote to work (it's a Chinavasion CVSB-983 - very useful, since I needed this to get my Harmony 900 working). Mythbuntu 12.04 64-bit MythTV 0.25 (likely irrelevant) How it is right now When I plug this in, it 'just works'. Which is great, except that Ubuntu uses it natively, and prevents some of the button presses from getting through to Myth. For example, I can send a button from the remote that equates to Ctrl-Alt-A (which I assume Ubuntu isn't interested in), and then trap that in Mythfrontend, but the remote's Play button is caught by Ubuntu (which displays a large circle with a line though it, as there's no media player loaded). I understand that this is because lirc is merged into the kernel now, and I like that. What I've done so far: Found the device using lsusb: $ lsusb Bus 001 Device 004: ID 073a:2230 Chaplet Systems, Inc. infrared dongle for remote Found the event device number: $ cat /proc/bus/input/devices I: Bus=0003 Vendor=073a Product=2230 Version=0110 N: Name="HID 073a:2230" P: Phys=usb-0000:00:1a.0-1.2/input0 S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5 U: Uniq= H: Handlers=sysrq kbd mouse1 event5 js0 B: PROP=0 B: EV=10001f B: KEY=4c37fff072ff32d bf54445600000000 ffffffffff 30c100b17c007 ffa67bfad951dfff febeffdfffefffff fffffffffffffffe B: REL=343 B: ABS=100030000 B: MSC=10 Tested the input with evtest (I pressed Play): $ sudo evtest /dev/input/event5 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x73a product 0x2230 version 0x110 Input device name: "HID 073a:2230" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 1 (KEY_ESC) Event code 2 (KEY_1) Event code 3 (KEY_2) Event code 4 (KEY_3) Event code 5 (KEY_4) Event code 6 (KEY_5) Event code 7 (KEY_6) <------------snipped lots of 'Event code' lines------------> Testing ... (interrupt to exit) Event: time 1336435683.230656, -------------- SYN_REPORT ------------ Event: time 1336435683.246648, type 4 (EV_MSC), code 4 (MSC_SCAN), value c00cd Event: time 1336435683.246652, type 1 (EV_KEY), code 164 (KEY_PLAYPAUSE), value 0 Event: time 1336435683.246655, -------------- SYN_REPORT ------------ Tested showkey, again for the Play key: $ sudo showkey -s kb mode was RAW [ if you are trying this under X, it might not work since the X server is also reading /dev/console ] press any key (program terminates 10s after last keypress)... 0xe0 0x22 0xe0 0xa2 What I want: I'd like a way to scan the incoming button presses, if the above method isn't correct. I'd like to either remap each button press to something that Ubuntu/Unity will ignore, or even better pass the keypress directly to Myth (I suspect this later is only possible with lirc, but I could be wrong). I would really like to do this with the in-kernel drivers, i.e. without explicitly loading lirc; if that's the way the world is going, I'd rather find a way to map the current behaviour to what I want, rather than forcing the 'old' arrangement of loading lirc outside the kernel. Learning something new is also worthwhile! My guess: I'm assuming that this will require using setkeycodes, but have had trouble finding enough information to configure this. Any help greatly appreciated!

    Read the article

  • SQLAuthority News – Advantages of Distance Learning

    - by Pinal Dave
    Distance education is extremely popular – almost overnight, it seems.  Almost everyone has taken an online course, or knows someone who has, or is considering joining an online school.  There are many advantages and disadvantages to attending an online school – but the same can be said of attending a physical school!  Let’s take a look at the top reasons to use distance education. 1) Flexibility.  Physical universities are usually willing to make some concessions to student – like night classes, study hours, and online networks.  However, nothing is going to beat the flexibility of distance education.  You can attend classes and take notes anytime, anywhere, wearing anything you’d like! 2) Affordability.  We don’t need to get into hard numbers to understand how an expensive university can be.  Students are taking on more and more debt just to get an education.  Many of these fees pay for room, board, and facilities.   Distance education cuts out all these costs, and makes attending school much more affordable for the average student. 3) Try before you buy.  Did you know that the average college student changes his or her major 10 times before they graduate?  You can imagine that this kind of indecision plays a huge part in WHEN you graduate – not being able to make up your mind can cost you big bucks if you have to stay in school for extra years!  Distance education allows you to take different classes from a wide range of disciplines.  Do you want to study forensic science or English literature?  Now you don’t have to pay for classes you can’t afford just to find out. 4) Pace yourself.  Some students struggle in a traditional classroom setting – classes can be taught too fast, too slow, or there are too many distractions.  Distance education allows mature students to set the pace themselves.  They can rewatch lectures they didn’t catch the first time, or go through classes quickly if they are already familiar with the material – cutting out the chance of burning out or getting bored. 5) Lifelong learning.  Maybe you already have a degree, but would like to learn more about your field, or a related field, or maybe even about something completely unrelated – just because you are curious!  Distance education allows you to learn whatever you want ,whenever you want (and yes, wearing anything you’d like!). 6) Attend whatever college you want.  Because of the popularity of distance education, physical campuses are getting in on the game by offering online courses – often just uploaded versions of classes already taught at their campus.  Ever wanted to attend Harvard, but knew you couldn’t get in?  Take a class online!  Of course, you probably should not attempt to lie and say you have a Harvard degree, but Ivy League colleges are prestigious because they are the best in their field – take advantage of the best by taking an online course! I am a big believer in continuing education, whether it is online courses, returning to school, or even take informal classes online.  Distance education can be a great way to accomplish these goals and become a lifelong learner. My friends at provides training through virtual classrooms for students who want to avoid travelling. Distance learning course allows IT aspirants to connect with trainers using the internet.  I encourage everyone to check it out! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, T SQL, Technology

    Read the article

  • How to express inter project dependencies in Eclipse PDE

    - by Roland Tepp
    I am looking for the best practice of handling inter project dependencies between mixed project types where some of the projects are eclipse plug-in/OSGI bundle projects (an RCP application) and others are just plain old java projects (web services modules). Few of the eclipse plug-ins have dependencies on Java projects. My problem is that at least as far as I've looked, there is no way of cleanly expressing such a dependency in Eclipse PDE environment. I can have plug-in projects depend on other plug-in projects (via Import-Package or Require-Bundle manifest headers), but not of the plain java projects. I seem to be able to have project declare a dependency on a jar from another project in a workspace, but these jar files do not get picked up by neither export nor launch configuration (although, java code editing sees the libraries just fine). The "Java projects" are used for building services to be deployed on an J2EE container (JBoss 4.2.2 for the moment) and produce in some cases multiple jar's - one for deploying to the JBoss ear and another for use by client code (an RCP application). The way we've "solved" this problem for now is that we have 2 more external tools launcher configurations - one for building all the jar's and another for copying these jar's to the plug-in projects. This works (sort of), but the "whole build" and "copy jars" targets incur quite a large build step, bypassing the whole eclipse incremental build feature and by copying the jars instead of just referencing the projects I am decoupling the dependency information and requesting quite a massive workspace refresh that eats up the development time like it was candy. What I would like to have is a much more "natural" workspace setup that would manage dependencies between projects and request incremental rebuilds only as they are needed, be able to use client code from service libraries in an RCP application plug-ins and be able to launch the RCP application with all the necessary classes where they are needed. So can I have my cake and eat it too ;) NOTE To be clear, this is not so much about dependency management and module management at the moment as it is about Eclipse PDE configuration. I am well aware of products like [Maven], [Ivy] and [Buckminster] and they solve a quite different problem (once I've solved the workspace configuration issue, these products can actually come in handy for materializing the workspace and building the product)

    Read the article

  • Mercurial repository usage with binary files for building setup files

    - by Ryan
    I have an existing Mercurial repository for a C++ application in a small corporate environment. I asked a co-worker to add the setup script to the repository and he added all of the dependency binaries, PDFs, and executable to the repository under an Install directory. I dislike having the binaries and dependencies in the same repository, but I'd like recommendations on best practices. Here are the options I am considering: Create a separate repository for the Installer and related files Create a subrepository for the Installer and related files Use a (yet to be identified) build dependency manager I am concerned with using a subrepository with Mercurial based on what I've read so far and the (apparently) incomplete implementation. I would like to get a project dependency system, e.g. Ivy, but I don't know all of the options and haven't had time yet to try out any options. I thought I'd use TortoiseHg as a basis, and it does not have the TortoiseHg binaries in the repository although it does have some binaries such as kdiff3.exe. Instead it uses setup.py to clone multiple repositories and build the apps. This seems reasonable for OSS, but not so much for corporate environments. Recommendations?

    Read the article

  • How to make use of Grails Dependencies in your IDE

    - by raoulsson
    Hi All, So I finally got my dependencies working with Grails. Now, how can my IDE, eg IntelliJ or Eclipse, take advantage of it? Or do I really have to manually manage what classes my IDE knows about at "development time"? If the BuildConfig.groovy script is setup right (see here), you will be able to code away with vi or your favorite editor without any troubles, then run grails compile which will resolve and download the dependencies into the Ivy cache and off you go... If, however, you are using an IDE like Eclipse or IntelliJ, you will need the dependencies at hand while coding. Obviously - as these animals will need them for the "real time" error detection/compilation process. Now, while it is certainly possible to code with all the classes shining up in bright red all over the place that are unknown to your IDE, it is certainly not much fun... The Maven support or whatever it is officially called lives happily with the pom file, no extra "jar directory" pointers needed, at least in IntelliJ. I would like to be able to do the same with Grails dependencies. Currently I am defining them in the BuildConfig.groovy and additionally I copy/paste the current jars around on my local disk and let the IDE point to it. Not very satisfactory, as I am working in a highly volatile project module environment with respect to code change. And this situation ports me directly into "jar hell", as my "develop- and build-dependencies" easily get out of sync and I have to manage manually, that is, with my brain... And my brain should be busy with other stuff... Thanks! Raoul P.S: I'm currently using Grails 1.2M4 and IntelliJ 92.105. But feel free to add answers on future versions of Grails and different, future IDEs, as the come in...

    Read the article

  • Keeping track of dependency revisions

    - by Samaursa
    I have a project with several dependencies that are in various repositories. Each time I commit changes to my project, I make sure I write the revision numbers of all the dependent repositories so that in the event I ever have to come back to this revision (let's call it 5), I can immediately know which revisions of the dependent repositories revision 5 is guaranteed to work with, update the dependencies to the specified revisions, compile and run the project. So for example if I have: Dep1 @ Revisions 10 Dep2 @ Revisions 20 Dep3 @ Revisions 10 Proj @ Revisions 35 And let's say that when Proj was on revision 17, the Dep1 revision was 5, Dep2 revision was 13 and Dep3 revision was 3. So in my SVN logs, I recorded something like this: !! Works with Dep1 Rev 5, Dep2 Rev 13, Dep3 Rev 3 To me this seems primitive and makes me believe that there is a better way to do it. Now in one of my other questions, Ivy Dependency Manager has been recommended. I have not looked at it in detail yet (seems complicated and yet another thing I must learn). To me it seems like the log of SVN (and Mercurial etc.) could have been split into Log and Dependencies (if any) where the latter could be switched off if there were no dependencies (unless of course I am unaware of an easier/better solution). This would allow for a cleaner log that maybe even warned at each new commit to check the previously defined dependencies again and make sure they have not changed. So, I was wondering how everyone manages this situations and if you have any tips, techniques, programs, suggestions that you can offer. Thank you.

    Read the article

  • Source code dependency manager for C++

    - by 7vies
    There are already some questions about dependency managers here, but it seems to me that they are mostly about build systems, while I am looking for something targeted purely at making dependency tracking and resolution simpler (and I'm not necessarily interested in learning a new build system). So, typically we have a project and some common code with another project. This common code is organized as a library, so when I want to get the latest code version for a project, I should also go get all the libraries from the source control. To do this, I need a list of dependencies. Then, to build the project I can reuse this list too. I've looked at Maven and Ivy, but I'm not sure if they would be appropriate for C++, as they look quite heavily java-targeted (even though there might be plugins for C++, I haven't found people recommending them). I see it as a GUI tool producing some standardized dependency list which can then be parsed by different scripts etc. It would be nice if it could integrate with source control (tag, get a tagged version with dependencies etc), but that's optional. Would you have any suggestions? Maybe I'm just missing something, and usually it's done some other way with no need for such a tool? Thanks.

    Read the article

  • Does IntelliJ-Idea support Groovy 2.x?

    - by Freewind
    I just tried IntelliJ-Idea 11.x and 12.x (EPA), but when I use Groovy 2.0.1 or 2.0.5, the code can't be run and there are some errors out there. The Groovy plugin of idea has little information about which version of Groovy has been supported. Does idea support Groovy 2.x? I want to try the new @TypeChecked annotation of Groovy 2. UPDATE My groovy code: class X { def hello() { println("hello, groovy") } def static main(String[] args) { new X().hello() } } It uses groovy 2.0.5: And the error thrown: E:\java\jdk1.6.0_29_x64\bin\java -Didea.launcher.port=7532 "-Didea.launcher.bin.path=E:\java\IntelliJ IDEA 11.1.4\bin" -Dfile.encoding=UTF-8 -classpath "E:\java\jdk1.6.0_29_x64\jre\lib\charsets.jar;E:\java\jdk1.6.0_29_x64\jre\lib\deploy.jar;E:\java\jdk1.6.0_29_x64\jre\lib\javaws.jar;E:\java\jdk1.6.0_29_x64\jre\lib\jce.jar;E:\java\jdk1.6.0_29_x64\jre\lib\jsse.jar;E:\java\jdk1.6.0_29_x64\jre\lib\management-agent.jar;E:\java\jdk1.6.0_29_x64\jre\lib\plugin.jar;E:\java\jdk1.6.0_29_x64\jre\lib\resources.jar;E:\java\jdk1.6.0_29_x64\jre\lib\rt.jar;E:\java\jdk1.6.0_29_x64\jre\lib\ext\dcevm.jar;E:\java\jdk1.6.0_29_x64\jre\lib\ext\dnsns.jar;E:\java\jdk1.6.0_29_x64\jre\lib\ext\localedata.jar;E:\java\jdk1.6.0_29_x64\jre\lib\ext\sunjce_provider.jar;E:\WORKSPACE\TestGroovy2\out\production\TestGroovy2;E:\java\groovy-2.0.5\lib\ant-1.8.4.jar;E:\java\groovy-2.0.5\lib\ant-antlr-1.8.4.jar;E:\java\groovy-2.0.5\lib\ant-junit-1.8.4.jar;E:\java\groovy-2.0.5\lib\ant-launcher-1.8.4.jar;E:\java\groovy-2.0.5\lib\antlr-2.7.7.jar;E:\java\groovy-2.0.5\lib\asm-4.0.jar;E:\java\groovy-2.0.5\lib\asm-analysis-4.0.jar;E:\java\groovy-2.0.5\lib\asm-commons-4.0.jar;E:\java\groovy-2.0.5\lib\asm-tree-4.0.jar;E:\java\groovy-2.0.5\lib\asm-util-4.0.jar;E:\java\groovy-2.0.5\lib\bsf-2.4.0.jar;E:\java\groovy-2.0.5\lib\commons-cli-1.2.jar;E:\java\groovy-2.0.5\lib\commons-logging-1.1.1.jar;E:\java\groovy-2.0.5\lib\gpars-1.0-beta-3.jar;E:\java\groovy-2.0.5\lib\groovy-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-ant-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-bsf-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-console-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-docgenerator-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-groovydoc-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-groovysh-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-jmx-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-json-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-jsr223-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-servlet-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-sql-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-swing-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-templates-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-test-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-testng-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-xml-2.0.5.jar;E:\java\groovy-2.0.5\lib\hamcrest-core-1.1.jar;E:\java\groovy-2.0.5\lib\ivy-2.2.0.jar;E:\java\groovy-2.0.5\lib\jansi-1.6.jar;E:\java\groovy-2.0.5\lib\jcommander-1.12.jar;E:\java\groovy-2.0.5\lib\jline-1.0.jar;E:\java\groovy-2.0.5\lib\jsp-api-2.0.jar;E:\java\groovy-2.0.5\lib\jsr166y-1.7.0.jar;E:\java\groovy-2.0.5\lib\junit-4.10.jar;E:\java\groovy-2.0.5\lib\qdox-1.12.jar;E:\java\groovy-2.0.5\lib\servlet-api-2.4.jar;E:\java\groovy-2.0.5\lib\testng-6.5.2.jar;E:\java\groovy-2.0.5\lib\xmlpull-1.1.3.1.jar;E:\java\groovy-2.0.5\lib\xstream-1.4.2.jar;E:\java\IntelliJ IDEA 11.1.4\lib\idea_rt.jar" com.intellij.rt.execution.application.AppMain X Exception in thread "main" java.lang.IncompatibleClassChangeError: Found interface org.objectweb.asm.MethodVisitor, but class was expected at org.codehaus.groovy.runtime.callsite.CallSiteGenerator.genConstructor(CallSiteGenerator.java:141) at org.codehaus.groovy.runtime.callsite.CallSiteGenerator.genPogoMetaMethodSite(CallSiteGenerator.java:162) at org.codehaus.groovy.runtime.callsite.CallSiteGenerator.compilePogoMethod(CallSiteGenerator.java:215) at org.codehaus.groovy.reflection.CachedMethod.createPogoMetaMethodSite(CachedMethod.java:228) at org.codehaus.groovy.runtime.callsite.PogoMetaMethodSite.createCachedMethodSite(PogoMetaMethodSite.java:212) at org.codehaus.groovy.runtime.callsite.PogoMetaMethodSite.createPogoMetaMethodSite(PogoMetaMethodSite.java:188) at groovy.lang.MetaClassImpl.createPogoCallSite(MetaClassImpl.java:3035) at org.codehaus.groovy.runtime.callsite.CallSiteArray.createPogoSite(CallSiteArray.java:147) at org.codehaus.groovy.runtime.callsite.CallSiteArray.createCallSite(CallSiteArray.java:161) at org.codehaus.groovy.runtime.callsite.CallSiteArray.defaultCall(CallSiteArray.java:45) at org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:108) at org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:112) at X.main(sta.groovy:6) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.intellij.rt.execution.application.AppMain.main(AppMain.java:120) Process finished with exit code 1

    Read the article

  • "state is undetermined" when starting Grails app on CloudFoundry

    - by SeattleStephens
    I have a Grails app that has been running on CloudFoundry for months. I updated the app from Grails 2.0.4 to 2.1.0 and also updated a few plugins I have been using. Now when I push the app to CloudFoundry and do the start, I receive the error: 'appname' state is undetermined, not enough information available. The tomcat Catalina log shows the NoClassDefFoundError below. I've read about issues with the Ivy cache but have not looked into that yet. I have updated vmc to the latest version (0.3.18). SEVERE: Error deploying web application directory ROOT java.lang.NoClassDefFoundError: org/apache/tomcat/PeriodicEventListener at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClassCond(ClassLoader.java:632) at java.lang.ClassLoader.defineClass(ClassLoader.java:616) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141) at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:2818) at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:1159) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1647) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1526) at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1128) at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1026) at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4421) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4734) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:799) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:779) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:601) at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:1079) at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:1002) at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:506) at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1317) at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:324) at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:142) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1065) at org.apache.catalina.core.StandardHost.start(StandardHost.java:840) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:463) at org.apache.catalina.core.StandardService.start(StandardService.java:525) at org.apache.catalina.core.StandardServer.start(StandardServer.java:754) at org.apache.catalina.startup.Catalina.start(Catalina.java:595) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:414) Caused by: java.lang.ClassNotFoundException: org.apache.tomcat.PeriodicEventListener at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1680) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1526) ... 34 more

    Read the article

  • Fix overscan in Linux with Intel graphics Vizio HDTV

    - by Padenton
    I am connecting my server to my HDTV so that I can conveniently display it there. My VIZIO HDTV cuts off all 4 edges. I already realize it is not optimal to be running a GUI on a server; this server will not have much external traffic so I prefer it for convenience. I have already spent countless hours searching for a fix, but all I could find required an ATI or NVIDIA graphics card, or didn’t work. In Windows, the Intel driver has a setting for underscan, though it seems only to be available by a glitch. Here’s my specs: Ubuntu Linux (Quantal 12.10) (Likely to switch to Arch) This is a home server computer, with KDE for managing(for now, at least) Graphics: Intel HD Graphics 4000 from Ivy Bridge Motherboard: ASRock Z77 Extreme4 CPU: Intel Core i5-3450 My monitors: Dell LCD monitor Vizio VX37L_HDTV10A 37" on HDMI input I have tried all of the following from both HDMI?HDMI and DVI?HDMI cables connected to the ports on my motherboard: Setting properties in xrandr Making sure drivers are all up to date Trying several different modes The TV was “cheap”; max resolution 1080i. I am able to get a 1920x1080 modeline, in both GNU/Linux and Windows, without difficulty. There is no setting in the menu to fix the overscan (I have tried all of them, I realize it’s not always called overscan). I have been in the service menu for the TV, which still does not contain an option to fix it. No aspect ratio settings, etc. The TV has a VGA connector but I am unsure if it would fix it, as I don’t have a VGA cable long enough, and am not sure it would get me the 1920x1080 resolution which I want. Using another resolution does not fix the problem. I tried custom modelines with the dimensions of my screen’s viewable area, but it wouldn’t let me use them. Ubuntu apparently doesn’t automatically generate an xorg.conf file for use. I read somewhere that modifying it may help solve it. I tried X -configure several times(with reboots, etc.) but it consistently gave the following error messages: In log file: … (WW) Falling back to old probe method for vesa Number of created screens does not match number of detected devices. Configuration failed. In output: … (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Number of created screens does not match number of detected devices. Configuration failed. Server terminated with error (2). Closing log file. Tried using 'overscan' prop in xrandr: root@xxx:/home/xxx# xrandr --output HDMI1 --set overscan off X Error of failed request: BadName (named color or font does not exist) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 11 (RRQueryOutputProperty) Serial number of failed request: 42 Current serial number in output stream: 42 'overscan on', 'underscan off', 'underscan on' were all also tried. Originally tried with Ubuntu 12.04, but failed and so updated to 12.10 when it was released. All software is up to date. I am not opposed to reinstalling my OS, likely will anyways (my preference being Arch).

    Read the article

  • How to diagnose and solve an erratic "HDCP Support Required"?

    - by Jom Orgstrom
    I am playing a digital tv broadcast on Windows Media Center for Windows 7. I built this system so it works with HDCP, and in fact I have been able to watch tv and bluray before with this same computer. However, I suddenly started getting an "HDCP Support Required" error from WMC. The entire message is as follows: HDCP Support Required High-bandwidth Digital Content Protection (HDCP) may not be supported by the current video card. Use an HDCP-compliant display, video card, and video driver. Or, connect using an analog connection such as component or VGA. Relevant specs are: CPU: Ivy Bridge Core i7-3770 Motherboard: Asus P8H77-I Memory: 16GB DDR3-1600 Graphics: Radeon HD 7850 (Driver by AMD, version 8.982.0.0 built on 2012/07/27) Display: Acer P243w connected by HDMI Sound: Roland Quad-Capture (It complains even when I use the bundled VIA HD Audio) TV Tuner: I-O Data GV-MC7/HZ3 OS: Windows 7 Professional SP1, Windows Update enabled. All patched and up to date. As you can see, there is nothing weird or old about my setup. I am also not doing anything strange, not doing any overclocking, weird system changes and so on. One thing that does happen from time to time, is that the display goes black for a few seconds (sometimes when watching media contents, sometimes when just using photoshop or Visual Studio). This happened with my previous setup as well, so I'd be inclined to think it is a display or cable issue (apart from the BD drive, these are the only things I kept from my previous setup to this one). But being a digital transfer, as far as I know, these things either work or not. Never erratically or with decreased quality. The thing is that sometimes I can watch the TV, sometimes not. This happens with recorded programs as well, so it's not a per-program thing. Sometimes rebooting helps, sometimes it doesn't. Sometimes unplugging and plugging back the HDMI connector helps, sometimes it doesn't. Sometimes doing so doesn't even turn the screen back on, so I have to reboot. Unfortunately, WMC's error message is quite unhelpful. I'd like to know exactly where the problem is, so I can solve it. I don't want to buy a brand new display just to then find out it was a registry setting that was misconfigured. I've tried looking at the system event viewer, but these errors don't show up at all in there. Other people who have this problem seem to have a setup that is not HDCP compliant, so I turn to you guys here. Anybody knows how to diagnose this problem? Edit: So I got the Cyberlink Blu-ray disc advisor. I ran it and told me everything was okay, except for the Video Connection Type, which showed as "Digital (without HDCP)". I then proceeded to unplug the power cable from the monitor, plugged it in again, ran the tool again, and now it's "Digital (with HDCP)". Needless to say, I can watch my TV and recorded programs on WMP again. I'm guessing that at some point, something may be slightly wrong with the HDCP setup, and Windows decides to reset the entire content protection path (which leads to the screen blanking out). Usually the reset succeeds, but sometimes it doesn't, so Windows defaults to turning HDCP off. There's no way to turn it back on, except by doing a hard reset of the display. I really want to know what the exact error was, so I can fix it. Is it the cable? is it the display? is it the video card? the driver? Also, is there any other way to try and turn HDCP on again without having to hard reset the display? Oh, questions, questions...

    Read the article

  • Why Are Minimized Programs Often Slow to Open Again?

    - by Jason Fitzpatrick
    It seems particularly counterintuitive: you minimize an application because you plan on returning to it later and wish to skip shutting the application down and restarting it later, but sometimes maximizing it takes even longer than launching it fresh. What gives? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader Bart wants to know why he’s not saving any time with application minimization: I’m working in Photoshop CS6 and multiple browsers a lot. I’m not using them all at once, so sometimes some applications are minimized to taskbar for hours or days. The problem is, when I try to maximize them from the taskbar – it sometimes takes longer than starting them! Especially Photoshop feels really weird for many seconds after finally showing up, it’s slow, unresponsive and even sometimes totally freezes for minute or two. It’s not a hardware problem as it’s been like that since always on all on my PCs. Would I also notice it after upgrading my HDD to SDD and adding RAM (my main PC holds 4 GB currently)? Could guys with powerful pcs / macs tell me – does it also happen to you? I guess OSes somehow “focus” on active software and move all the resources away from the ones that run, but are not used. Is it possible to somehow set RAM / CPU / HDD priorities or something, for let’s say, Photoshop, so it won’t slow down after long period of inactivity? So what is the deal? Why does he find himself waiting to maximize a minimized app? The Answer SuperUser contributor Allquixotic explains why: Summary The immediate problem is that the programs that you have minimized are being paged out to the “page file” on your hard disk. This symptom can be improved by installing a Solid State Disk (SSD), adding more RAM to your system, reducing the number of programs you have open, or upgrading to a newer system architecture (for instance, Ivy Bridge or Haswell). Out of these options, adding more RAM is generally the most effective solution. Explanation The default behavior of Windows is to give active applications priority over inactive applications for having a spot in RAM. When there’s significant memory pressure (meaning the system doesn’t have a lot of free RAM if it were to let every program have all the RAM it wants), it starts putting minimized programs into the page file, which means it writes out their contents from RAM to disk, and then makes that area of RAM free. That free RAM helps programs you’re actively using — say, your web browser — run faster, because if they need to claim a new segment of RAM (like when you open a new tab), they can do so. This “free” RAM is also used as page cache, which means that when active programs attempt to read data on your hard disk, that data might be cached in RAM, which prevents your hard disk from being accessed to get that data. By using the majority of your RAM for page cache, and swapping out unused programs to disk, Windows is trying to improve responsiveness of the program(s) you are actively using, by making RAM available to them, and caching the files they access in RAM instead of the hard disk. The downside of this behavior is that minimized programs can take a while to have their contents copied from the page file, on disk, back into RAM. The time increases the larger the program’s footprint in memory. This is why you experience that delay when maximizing Photoshop. RAM is many times faster than a hard disk (depending on the specific hardware, it can be up to several orders of magnitude). An SSD is considerably faster than a hard disk, but it is still slower than RAM by orders of magnitude. Having your page file on an SSD will help, but it will also wear out the SSD more quickly than usual if your page file is heavily utilized due to RAM pressure. Remedies Here is an explanation of the available remedies, and their general effectiveness: Installing more RAM: This is the recommended path. If your system does not support more RAM than you already have installed, you will need to upgrade more of your system: possibly your motherboard, CPU, chassis, power supply, etc. depending on how old it is. If it’s a laptop, chances are you’ll have to buy an entire new laptop that supports more installed RAM. When you install more RAM, you reduce memory pressure, which reduces use of the page file, which is a good thing all around. You also make available more RAM for page cache, which will make all programs that access the hard disk run faster. As of Q4 2013, my personal recommendation is that you have at least 8 GB of RAM for a desktop or laptop whose purpose is anything more complex than web browsing and email. That means photo editing, video editing/viewing, playing computer games, audio editing or recording, programming / development, etc. all should have at least 8 GB of RAM, if not more. Run fewer programs at a time: This will only work if the programs you are running do not use a lot of memory on their own. Unfortunately, Adobe Creative Suite products such as Photoshop CS6 are known for using an enormous amount of memory. This also limits your multitasking ability. It’s a temporary, free remedy, but it can be an inconvenience to close down your web browser or Word every time you start Photoshop, for instance. This also wouldn’t stop Photoshop from being swapped when minimizing it, so it really isn’t a very effective solution. It only helps in some specific situations. Install an SSD: If your page file is on an SSD, the SSD’s improved speed compared to a hard disk will result in generally improved performance when the page file has to be read from or written to. Be aware that SSDs are not designed to withstand a very frequent and constant random stream of writes; they can only be written over a limited number of times before they start to break down. Heavy use of a page file is not a particularly good workload for an SSD. You should install an SSD in combination with a large amount of RAM if you want maximum performance while preserving the longevity of the SSD. Use a newer system architecture: Depending on the age of your system, you may be using an out of date system architecture. The “system architecture” is generally defined as the “generation” (think generations like children, parents, grandparents, etc.) of the motherboard and CPU. Newer generations generally support faster I/O (input/output), better memory bandwidth, lower latency, and less contention over shared resources, instead providing dedicated links between components. For example, starting with the “Nehalem” generation (around 2009), the Front-Side Bus (FSB) was eliminated, which removed a common bottleneck, because almost all system components had to share the same FSB for transmitting data. This was replaced with a “point to point” architecture, meaning that each component gets its own dedicated “lane” to the CPU, which continues to be improved every few years with new generations. You will generally see a more significant improvement in overall system performance depending on the “gap” between your computer’s architecture and the latest one available. For example, a Pentium 4 architecture from 2004 is going to see a much more significant improvement upgrading to “Haswell” (the latest as of Q4 2013) than a “Sandy Bridge” architecture from ~2010. Links Related questions: How to reduce disk thrashing (paging)? Windows Swap (Page File): Enable or Disable? Also, just in case you’re considering it, you really shouldn’t disable the page file, as this will only make matters worse; see here. And, in case you needed extra convincing to leave the Windows Page File alone, see here and here. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

    Read the article

  • Solaris 11.1: Changes to included FOSS packages

    - by alanc
    Besides the documentation changes I mentioned last time, another place you can see Solaris 11.1 changes before upgrading is in the online package repository, now that the 11.1 packages have been published to http://pkg.oracle.com/solaris/release/, as the “0.175.1.0.0.24.2” branch. (Oracle Solaris Package Versioning explains what each field in that version string means.) When you’re ready to upgrade to the packages from either this repo, or the support repository, you’ll want to first read How to Update to Oracle Solaris 11.1 Using the Image Packaging System by Pete Dennis, as there are a couple issues you will need to be aware of to do that upgrade, several of which are due to changes in the Free and Open Source Software (FOSS) packages included with Solaris, as I’ll explain in a bit. Solaris 11 can update more readily than Solaris 10 In the Solaris 10 and older update models, the way the updates were built constrained what changes we could make in those releases. To change an existing SVR4 package in those releases, we created a Solaris Patch, which applied to a given version of the SVR4 package and replaced, added or deleted files in it. These patches were released via the support websites (originally SunSolve, now My Oracle Support) for applying to existing Solaris 10 installations, and were also merged into the install images for the next Solaris 10 update release. (This Solaris Patches blog post from Gerry Haskins dives deeper into that subject.) Some of the restrictions of this model were that package refactoring, changes to package dependencies, and even just changing the package version number, were difficult to do in this hybrid patch/OS update model. For instance, when Solaris 10 first shipped, it had the Xorg server from X11R6.8. Over the first couple years of update releases we were able to keep it up to date by replacing, adding, & removing files as necessary, taking it all the way up to Xorg server release 1.3 (new version numbering begun after the X11R7 split of the X11 tree into separate modules gave each module its own version). But if you run pkginfo on the SUNWxorg-server package, you’ll see it still displayed a version number of 6.8, confusing users as to which version was actually included. We stopped upgrading the Xorg server releases in Solaris 10 after 1.3, as later versions added new dependencies, such as HAL, D-Bus, and libpciaccess, which were very difficult to manage in this patching model. (We later got libpciaccess to work, but HAL & D-Bus would have been much harder due to the greater dependency tree underneath those.) Similarly, every time the GNOME team looked into upgrading Solaris 10 past GNOME 2.6, they found these constraints made it so difficult it wasn’t worthwhile, and eventually GNOME’s dependencies had changed enough it was completely infeasible. Fortunately, this worked out for both the X11 & GNOME teams, with our management making the business decision to concentrate on the “Nevada” branch for desktop users - first as Solaris Express Desktop Edition, and later as OpenSolaris, so we didn’t have to fight to try to make the package updates fit into these tight constraints. Meanwhile, the team designing the new packaging system for Solaris 11 was seeing us struggle with these problems, and making this much easier to manage for both the development teams and our users was one of their big goals for the IPS design they were working on. Now that we’ve reached the first update release to Solaris 11, we can start to see the fruits of their labors, with more FOSS updates in 11.1 than we had in many Solaris 10 update releases, keeping software more up to date with the upstream communities. Of course, just because we can more easily update now, doesn’t always mean we should or will do so, it just removes the package system limitations from forcing the decision for us. So while we’ve upgraded the X Window System in the 11.1 release from X11R7.6 to 7.7, the Solaris GNOME team decided it was not the right time to try to make the jump from GNOME 2 to GNOME 3, though they did update some individual components of the desktop, especially those with security fixes like Firefox. In other parts of the system, decisions as to what to update were prioritized based on how they affected other projects, or what customer requests we’d gotten for them. So with all that background in place, what packages did we actually update or add between Solaris 11.0 and 11.1? Core OS Functionality One of the FOSS changes with the biggest impact in this release is the upgrade from Grub Legacy (0.97) to Grub 2 (1.99) for the x64 platform boot loader. This is the cause of one of the upgrade quirks, since to go from Solaris 11.0 to 11.1 on x64 systems, you first need to update the Boot Environment tools (such as beadm) to a new version that can handle boot environments that use the Grub2 boot loader. System administrators can find the details they need to know about the new Grub in the Administering the GRand Unified Bootloader chapter of the Booting and Shutting Down Oracle Solaris 11.1 Systems guide. This change was necessary to be able to support new hardware coming into the x64 marketplace, including systems using UEFI firmware or booting off disk drives larger than 2 terabytes. For both platforms, Solaris 11.1 adds rsyslog as an optional alternative to the traditional syslogd, and OpenSCAP for checking security configuration settings are compliant with site policies. Note that the support repo actually has newer versions of BIND & fetchmail than the 11.1 release, as some late breaking critical fixes came through from the community upstream releases after the Solaris 11.1 release was frozen, and made their way to the support repository. These are responsible for the other big upgrade quirk in this release, in which to upgrade a system which already installed those versions from the support repo, you need to either wait for those packages to make their way to the 11.1 branch of the support repo, or follow the steps in the aforementioned upgrade walkthrough to let the package system know it's okay to temporarily downgrade those. Developer Stack While Solaris 11.0 included Python 2.7, many of the bundled python modules weren’t packaged for it yet, limiting its usability. For 11.1, many more of the python modules include 2.7 versions (enough that I filtered them out of the below table, but you can always search on the package repository server for them. For other language runtimes and development tools, 11.1 expands the use of IPS mediated links to choose which version of a package is the default when the packages are designed to allow multiple versions to install side by side. For instance, in Solaris 11.0, GNU automake 1.9 and 1.10 were provided, and developers had to run them as either automake-1.9 or automake-1.10. In Solaris 11.1, when automake 1.11 was added, also added was a /usr/bin/automake mediated link, which points to the automake-1.11 program by default, but can be changed to another version by running the pkg set-mediator command. Mediated links were also used for the Java runtime & development kits in 11.1, changing the default versions to the Java 7 releases (the 1.7.0.x package versions), while allowing admins to switch links such as /usr/bin/javac back to Java 6 if they need to for their site, to deal with Java 7 compatibility or other issues, without having to update each usage to use the full versioned /usr/jdk/jdk1.6.0_35/bin/javac paths for every invocation. Desktop Stack As I mentioned before, we upgraded from X11R7.6 to X11R7.7, since a pleasant coincidence made the X.Org release dates line up nicely with our feature & code freeze dates for this release. (Or perhaps it wasn’t so coincidental, after all, one of the benefits of being the person making the release is being able to decide what schedule is most convenient for you, and this one worked well for me.) For the table below, I’ve skipped listing the packages in which we use the X11 “katamari” version for the Solaris package version (mainly packages combining elements of multiple upstream modules with independent version numbers), since they just all changed from 7.6 to 7.7. In the graphics drivers, we worked with Intel to update the Intel Integrated Graphics Processor support to support 3D graphics and kernel mode setting on the Ivy Bridge chipsets, and updated Nvidia’s non-FOSS graphics driver from 280.13 to 295.20. Higher up in the desktop stack, PulseAudio was added for audio support, and liblouis for Braille support, and the GNOME applications were built to use them. The Mozilla applications, Firefox & Thunderbird moved to the current Extended Support Release (ESR) versions, 10.x for each, to bring up-to-date security fixes without having to be on Mozilla’s agressive 6 week feature cycle release train. Detailed list of changes This table shows most of the changes to the FOSS packages between Solaris 11.0 and 11.1. As noted above, some were excluded for clarity, or to reduce noise and duplication. All the FOSS packages which didn't change the version number in their packaging info are not included, even if they had updates to fix bugs, security holes, or add support for new hardware or new features of Solaris. Package11.011.1 archiver/unrar 3.8.5 4.1.4 audio/sox 14.3.0 14.3.2 backup/rdiff-backup 1.2.1 1.3.3 communication/im/pidgin 2.10.0 2.10.5 compress/gzip 1.3.5 1.4 compress/xz not included 5.0.1 database/sqlite-3 3.7.6.3 3.7.11 desktop/remote-desktop/tigervnc 1.0.90 1.1.0 desktop/window-manager/xcompmgr 1.1.5 1.1.6 desktop/xscreensaver 5.12 5.15 developer/build/autoconf 2.63 2.68 developer/build/autoconf/xorg-macros 1.15.0 1.17 developer/build/automake-111 not included 1.11.2 developer/build/cmake 2.6.2 2.8.6 developer/build/gnu-make 3.81 3.82 developer/build/imake 1.0.4 1.0.5 developer/build/libtool 1.5.22 2.4.2 developer/build/makedepend 1.0.3 1.0.4 developer/documentation-tool/doxygen 1.5.7.1 1.7.6.1 developer/gnu-binutils 2.19 2.21.1 developer/java/jdepend not included 2.9 developer/java/jdk-6 1.6.0.26 1.6.0.35 developer/java/jdk-7 1.7.0.0 1.7.0.7 developer/java/jpackage-utils not included 1.7.5 developer/java/junit 4.5 4.10 developer/lexer/jflex not included 1.4.1 developer/parser/byaccj not included 1.14 developer/parser/java_cup not included 0.10 developer/quilt 0.47 0.60 developer/versioning/git 1.7.3.2 1.7.9.2 developer/versioning/mercurial 1.8.4 2.2.1 developer/versioning/subversion 1.6.16 1.7.5 diagnostic/constype 1.0.3 1.0.4 diagnostic/nmap 5.21 5.51 diagnostic/scanpci 0.12.1 0.13.1 diagnostic/wireshark 1.4.8 1.8.2 diagnostic/xload 1.1.0 1.1.1 editor/gnu-emacs 23.1 23.4 editor/vim 7.3.254 7.3.600 file/lndir 1.0.2 1.0.3 image/editor/bitmap 1.0.5 1.0.6 image/gnuplot 4.4.0 4.6.0 image/library/libexif 0.6.19 0.6.21 image/library/libpng 1.4.8 1.4.11 image/library/librsvg 2.26.3 2.34.1 image/xcursorgen 1.0.4 1.0.5 library/audio/pulseaudio not included 1.1 library/cacao 2.3.0.0 2.3.1.0 library/expat 2.0.1 2.1.0 library/gc 7.1 7.2 library/graphics/pixman 0.22.0 0.24.4 library/guile 1.8.4 1.8.6 library/java/javadb 10.5.3.0 10.6.2.1 library/java/subversion 1.6.16 1.7.5 library/json-c not included 0.9 library/libedit not included 3.0 library/libee not included 0.3.2 library/libestr not included 0.1.2 library/libevent 1.3.5 1.4.14.2 library/liblouis not included 2.1.1 library/liblouisxml not included 2.1.0 library/libtecla 1.6.0 1.6.1 library/libtool/libltdl 1.5.22 2.4.2 library/nspr 4.8.8 4.8.9 library/openldap 2.4.25 2.4.30 library/pcre 7.8 8.21 library/perl-5/subversion 1.6.16 1.7.5 library/python-2/jsonrpclib not included 0.1.3 library/python-2/lxml 2.1.2 2.3.3 library/python-2/nose not included 1.1.2 library/python-2/pyopenssl not included 0.11 library/python-2/subversion 1.6.16 1.7.5 library/python-2/tkinter-26 2.6.4 2.6.8 library/python-2/tkinter-27 2.7.1 2.7.3 library/security/nss 4.12.10 4.13.1 library/security/openssl 1.0.0.5 (1.0.0e) 1.0.0.10 (1.0.0j) mail/thunderbird 6.0 10.0.6 network/dns/bind 9.6.3.4.3 9.6.3.7.2 package/pkgbuild not included 1.3.104 print/filter/enscript not included 1.6.4 print/filter/gutenprint 5.2.4 5.2.7 print/lp/filter/foomatic-rip 3.0.2 4.0.15 runtime/java/jre-6 1.6.0.26 1.6.0.35 runtime/java/jre-7 1.7.0.0 1.7.0.7 runtime/perl-512 5.12.3 5.12.4 runtime/python-26 2.6.4 2.6.8 runtime/python-27 2.7.1 2.7.3 runtime/ruby-18 1.8.7.334 1.8.7.357 runtime/tcl-8/tcl-sqlite-3 3.7.6.3 3.7.11 security/compliance/openscap not included 0.8.1 security/nss-utilities 4.12.10 4.13.1 security/sudo 1.8.1.2 1.8.4.5 service/network/dhcp/isc-dhcp 4.1 4.1.0.6 service/network/dns/bind 9.6.3.4.3 9.6.3.7.2 service/network/ftp (ProFTPD) 1.3.3.0.5 1.3.3.0.7 service/network/samba 3.5.10 3.6.6 shell/conflict 0.2004.9.1 0.2010.6.27 shell/pipe-viewer 1.1.4 1.2.0 shell/zsh 4.3.12 4.3.17 system/boot/grub 0.97 1.99 system/font/truetype/liberation 1.4 1.7.2 system/library/freetype-2 2.4.6 2.4.9 system/library/libnet 1.1.2.1 1.1.5 system/management/cim/pegasus 2.9.1 2.11.0 system/management/ipmitool 1.8.10 1.8.11 system/management/wbem/wbemcli 1.3.7 1.3.9.1 system/network/routing/quagga 0.99.8 0.99.19 system/rsyslog not included 6.2.0 terminal/luit 1.1.0 1.1.1 text/convmv 1.14 1.15 text/gawk 3.1.5 3.1.8 text/gnu-grep 2.5.4 2.10 web/browser/firefox 6.0.2 10.0.6 web/browser/links 1.0 1.0.3 web/java-servlet/tomcat 6.0.33 6.0.35 web/php-53 not included 5.3.14 web/php-53/extension/php-apc not included 3.1.9 web/php-53/extension/php-idn not included 0.2.0 web/php-53/extension/php-memcache not included 3.0.6 web/php-53/extension/php-mysql not included 5.3.14 web/php-53/extension/php-pear not included 5.3.14 web/php-53/extension/php-suhosin not included 0.9.33 web/php-53/extension/php-tcpwrap not included 1.1.3 web/php-53/extension/php-xdebug not included 2.2.0 web/php-common not included 11.1 web/proxy/squid 3.1.8 3.1.18 web/server/apache-22 2.2.20 2.2.22 web/server/apache-22/module/apache-sed 2.2.20 2.2.22 web/server/apache-22/module/apache-wsgi not included 3.3 x11/diagnostic/xev 1.1.0 1.2.0 x11/diagnostic/xscope 1.3 1.3.1 x11/documentation/xorg-docs 1.6 1.7 x11/keyboard/xkbcomp 1.2.3 1.2.4 x11/library/libdmx 1.1.1 1.1.2 x11/library/libdrm 2.4.25 2.4.32 x11/library/libfontenc 1.1.0 1.1.1 x11/library/libfs 1.0.3 1.0.4 x11/library/libice 1.0.7 1.0.8 x11/library/libsm 1.2.0 1.2.1 x11/library/libx11 1.4.4 1.5.0 x11/library/libxau 1.0.6 1.0.7 x11/library/libxcb 1.7 1.8.1 x11/library/libxcursor 1.1.12 1.1.13 x11/library/libxdmcp 1.1.0 1.1.1 x11/library/libxext 1.3.0 1.3.1 x11/library/libxfixes 4.0.5 5.0 x11/library/libxfont 1.4.4 1.4.5 x11/library/libxft 2.2.0 2.3.1 x11/library/libxi 1.4.3 1.6.1 x11/library/libxinerama 1.1.1 1.1.2 x11/library/libxkbfile 1.0.7 1.0.8 x11/library/libxmu 1.1.0 1.1.1 x11/library/libxmuu 1.1.0 1.1.1 x11/library/libxpm 3.5.9 3.5.10 x11/library/libxrender 0.9.6 0.9.7 x11/library/libxres 1.0.5 1.0.6 x11/library/libxscrnsaver 1.2.1 1.2.2 x11/library/libxtst 1.2.0 1.2.1 x11/library/libxv 1.0.6 1.0.7 x11/library/libxvmc 1.0.6 1.0.7 x11/library/libxxf86vm 1.1.1 1.1.2 x11/library/mesa 7.10.2 7.11.2 x11/library/toolkit/libxaw7 1.0.9 1.0.11 x11/library/toolkit/libxt 1.0.9 1.1.3 x11/library/xtrans 1.2.6 1.2.7 x11/oclock 1.0.2 1.0.3 x11/server/xdmx 1.10.3 1.12.2 x11/server/xephyr 1.10.3 1.12.2 x11/server/xorg 1.10.3 1.12.2 x11/server/xorg/driver/xorg-input-keyboard 1.6.0 1.6.1 x11/server/xorg/driver/xorg-input-mouse 1.7.1 1.7.2 x11/server/xorg/driver/xorg-input-synaptics 1.4.1 1.6.2 x11/server/xorg/driver/xorg-input-vmmouse 12.7.0 12.8.0 x11/server/xorg/driver/xorg-video-ast 0.91.10 0.93.10 x11/server/xorg/driver/xorg-video-ati 6.14.1 6.14.4 x11/server/xorg/driver/xorg-video-cirrus 1.3.2 1.4.0 x11/server/xorg/driver/xorg-video-dummy 0.3.4 0.3.5 x11/server/xorg/driver/xorg-video-intel 2.10.0 2.18.0 x11/server/xorg/driver/xorg-video-mach64 6.9.0 6.9.1 x11/server/xorg/driver/xorg-video-mga 1.4.13 1.5.0 x11/server/xorg/driver/xorg-video-openchrome 0.2.904 0.2.905 x11/server/xorg/driver/xorg-video-r128 6.8.1 6.8.2 x11/server/xorg/driver/xorg-video-trident 1.3.4 1.3.5 x11/server/xorg/driver/xorg-video-vesa 2.3.0 2.3.1 x11/server/xorg/driver/xorg-video-vmware 11.0.3 12.0.2 x11/server/xserver-common 1.10.3 1.12.2 x11/server/xvfb 1.10.3 1.12.2 x11/server/xvnc 1.0.90 1.1.0 x11/session/sessreg 1.0.6 1.0.7 x11/session/xauth 1.0.6 1.0.7 x11/session/xinit 1.3.1 1.3.2 x11/transset 0.9.1 1.0.0 x11/trusted/trusted-xorg 1.10.3 1.12.2 x11/x11-window-dump 1.0.4 1.0.5 x11/xclipboard 1.1.1 1.1.2 x11/xclock 1.0.5 1.0.6 x11/xfd 1.1.0 1.1.1 x11/xfontsel 1.0.3 1.0.4 x11/xfs 1.1.1 1.1.2 P.S. To get the version numbers for this table, I ran a quick perl script over the output from: % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.1.0.0.24` \ | sort /tmp/11.1 % pkg contents -H -r -t depend -a type=incorporate -o fmri \ `pkg contents -H -r -t depend -a type=incorporate -o fmri [email protected],5.11-0.175.0.0.0.2` \ | sort /tmp/11.0

    Read the article

  • CodePlex Daily Summary for Saturday, January 01, 2011

    CodePlex Daily Summary for Saturday, January 01, 2011Popular ReleasesBloodSim: BloodSim - 1.3.0.0: - Added tally for number of boss swings and swing avoids - Removed a large number of options that were carried over from Beta and are no longer relevant - Changed stat entry to use Rating format for Dodge, Parry, Haste and Mastery - Rearranged Settings interface - BloodSim will now check for updates on startup and notify the user if a new version is available - Added option to Show/Hide the Simulation Log to increase speed during large simulationsEnhSim: EnhSim 2.2.8 ALPHA: 2.2.8 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Rebuilt Feral Spir...CBM-Command: Version 2.0 Beta 2 - 2010-12-31: This version fixes three major bugs in Version 2.0 Beta 1 Changes(64, 128, Plus/4) Changed the timing code back to version 1.7 because the clock() function in cc65 does not reflect accurate timing. (VIC, PET) The time(NULL) function is not available on these targets and thus had to be removed. Help Hot-Key Fixed - Now when you press either F1 or H you get the help file (if the CBM-Command disk is in the drive you started CBM-Command from). Updated Help File - the new help file by popmi...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.6 Released: Hi, Today we are releasing final version of Visifire, v3.6.6 with the following new feature: * TextDecorations property is implemented in Title for Chart. * TitleTextDecorations property is implemented in Axis. * MinPointHeight property is now applicable for Column and Bar Charts. Also this release includes few bug fixes: * ToolTipText property of DataSeries was not getting applied from Style. * Chart threw exception if IndicatorEnabled property was set to true and Too...StyleCop Compliant Visual Studio Code Snippets: Visual Studio Code Snippets - January 2011: StyleCop Compliant Visual Studio Code Snippets Visual Studio 2010 provides C# developers with 38 code snippets, enhancing developer productivty and increasing the consistency of the code. Within this project the original code snippets have been refactored to provide StyleCop compliant versions of the original code snippets while also adding many new code snippets. Within the January 2011 release you'll find 82 code snippets to make you more productive and the code you write more consistent!...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.2: Version: 2.0.0.2 (Milestone 2): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...eCompany: eCompany v0.2.0 Build 63: Version 0.2.0 Build 63: Added Splash screen & about box Added downloading of currencies when eCompany launched for the first time (must close any bug caused by no currency rate existing) Added corp creation when eCompany launched for the first time (for now, you didn't need to edit the company.xml file manually) You just need to decompress file "eCompany v0.2.0.63.zip" into your current eCompany install directory.SQL Monitor - tracking sql server activities: SQL Monitor 3.0 alpha 8: 1. added truncate table/defrag index/check db functions 2. improved alert 3. fixed problem with alert causing config file corrupted(hopefully)Temporary Data Storage Folder: TDS Folder version 0.2 Beta: In this release following bugs are fixed: 'Send to' entry bug fixed Preferences bug fixedSilverlight File Upload and Download with Interlink: HSS Interlink v.2.1.300: Latest Release 2.1.300 - December 29th 2010 Change Log DownloadFileDialog Modified to support an absolute uri for the DownloadUri property, which is required for OOB support UploadFileDialog Modified to support an absolute uri for the UploadUri property, which is required for OOB support For existing users be sure to uninstall the older version prior to installing this version Note: The demo application is NOT included with the installer but can be reviewed here Stable release and ready...RDPAddins .NET: RDPAddins Alpha 2 (0.2.0.0): Second alpha release... Breaking changes (now this project has 0.2 version): now addin should implement RDPAddins.Common.IAddin and should me exported with RDPAddins.Common.AddinMetadataAtrribute !!!most of all old Addin base class method you can fide in IChannel or IUI interfeces see FileTransferAddin Now RDPAddins.Common.dll just provide interfaces for addin, channel, ui, and export metadata Whole implementation is in RDPAddins.exe RDPAddins.Common.dll has some documentation :) why all this...DocX: DocX v1.0.0.11: Building Examples projectTo build the Examples project, download DocX.dll and add it as a reference to the project. OverviewThis version of DocX contains many bug fixes, it is a serious step towards a stable release. Added1) Unit testing project, 2) Examples project, 3) To many bug fixes to list here, see the source code change list history.Cosmos (C# Open Source Managed Operating System): 71406: This is the second release supporting the full line of Visual Studio 2010 editions. Changes since release 71246 include: Debug info is now stored in a single .cpdb file (which is a Firebird database) Keyboard input works now (using Console.ReadLine) Console colors work (using Console.ForegroundColor and .BackgroundColor)AutoLoL: AutoLoL v1.5.0: Added the all new Masteries Browser which replaces the Quick Open combobox AutoLoL will now attemt to create file associations for mastery (*.lolm) files Each Mastery Build can now contain keywords that the Masteries Browser will use for filtering Changed the way AutoLoL detects if another instance is already running Changed the format of the mastery files to allow more information stored in* Dialogs will now focus the Ok or Cancel button which allows the user to press Return to clo...Paint.NET PSD Plugin: 1.6.0: Handling of layer masks has been greatly improved. Improved reliability. Many PSD files that previously loaded in as garbage will now load in correctly. Parallelized loading. PSD files containing layer masks will load in a bit quicker thanks to the removal of the sequential bottleneck. Hidden layers are no longer made visible on save. Many thanks to the users who helped expose the layer masks problem: Rob Horowitz, M_Lyons10. Please keep sending in those bug reports and PSD repro files!Facebook C# SDK: 4.1.1: From 4.1.1 Release: Authentication bug fix caused by facebook change (error with redirects in Safari) Authenticator fix, always returning true From 4.1.0 Release Lots of bug fixes Removed Dynamic Runtime Language dependencies from non-dynamic platforms. Samples included in release for ASP.NET, MVC, Silverlight, Windows Phone 7, WPF, WinForms, and one Visual Basic Sample Changed internal serialization to use Json.net BREAKING CHANGE: Canvas Session is no longer supported. Use Signed...Catel - WPF and Silverlight MVVM library: 1.0.0: And there it is, the final release of Catel, and it is no longer a beta version!Euro for Windows XP: ChangeRegionalSettings 1..0: *Rocket Framework (.Net 4.0): Rocket Framework for Windows V 1.0.0: Architecture is reviewed and adjusted in a way so that I can introduce the Web version and WPF version of this framework next. - Rocket.Core is introduced - Controller button functions revisited and updated - DB is renewed to suite the implemented features - Create New button functionality is changed - Add Question Handling featuresFlickr Wallpaper Rotator (for Windows desktop): Wallpaper Flickr 1.1: Some minor bugfixes (mostly covering when network connection is flakey, so I discovered them all while at my parents' house for Christmas).New Projects7-Up: PowerShell Scripts for Upgrading SharePoint 2007 to 2010: PowerShell scripts to automate the upgrade of SharePoint 2007 to SharePoint 2010 using a content database or hybrid upgrade approach.Apple Wireless Keyboard: Helper that Allows people use the Apple Wireless (or Wired possibly) Keyboard under Windows 7 without loosing the mac functionalityckTest: testtesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttestCrude - .Net Dependency Management: Crude is light dependency management for .net, there was no dependency management solution for .net as Maven or Ivy until now. DeepTime: Event tacking, management and plotting site.Dev/Test Cloud Platform: Dev/Test Cloud Platform is implemented by Beyondsoft and Microsoft. The platform is dedicated to software development and test scenarios. With Dev/Test Cloud you can save your cost, improve work efficiency, and improve product quality.Image Viewer (wpf version): Image viewer helps windows users to review images on their computer. It is written i Csharp and wpf.LNOne: All common code, framework code, utility code in one.LOGL::GLib: LOGL::GLib is an OpenGL game library written in C++ that allows new C++/OpenGL programmers to focus more on the game and less on the details.MAPI.GUI: Graphical program uses function from mcopyapi.codeplex.com and mdeleteapi.codeplex.com console programs. Program support longPath (above 259 chars and less 32000 chars)Movie Collection Manager: Gerenciador que ajuda a manusear coleção de filmes. Possui uma interface super atraente e simples de usar. Ferramentas e tecnologias usadas: - Visual C# 2010 Express - SQL Server 2008 R2 Express - Windows Forms - Entity Framework OBS: Projeto concorrente do Desafio .NETMyStudioServer.com: Source code for the DotNetNuke http://MyStudioServer.com websiteNusya Tester: A software to create and use various tests with right answers explanations to help one in self-education. It's developed in C#Project Zylaphon: Project Zylaphon is a C# GPL Open Source Computer Aided Music Composition System. Its design goals include highly interactive composition, music computation, and analysis; system control to be provided by an A.I. goal based agenda and quasi Blackboard for maximum flexibility.Remember The Task: RememberTheTask makes it easier to remember what you have been doing the last hour. It's developed in Visual Basic.Rent Payments Scheduling: Register rent schedules and keep track of them.Simple MVVM Toolkit for Silverlight: Simple MVVM Toolkit makes it easier to develop Silverlight applications using the Model-View-ViewModel design pattern.Sparrow.NET HtmlTemplate: Its a template engine for generating web pages.(?????HTML?????,??????html Tag???????html????。)SQLDiagUI: SQLDiagUI provides a GUI for Microsoft SQlDiag Utility which allows users to create a configuration file and start/stop/schedule SQLDiag against a SQL Server.Test Control: testing frameworkTwicko: Simple twitter client.Unity3D Utilities: Unity3D Utilities provides additional functionality to Unity3D (3.0+) via extensions, utilities, mini-frameworks, etc.VBA Composite Controls Object Model: VBA Composite Controls encapsulate complex event-driven interactions between ActiveX controls and other objects in Microsoft Office. It's uses are limited only by the imagination, from binding controls together for updating, to creating unique user interfaces!World of Warcraft Backit up(wow backit up): a project that helps you backup and restore your settings in wow easilyYamma: Yet Another Money Management Application. Build in .NET 4, SQLCE, LINQ and the Entity Framework.

    Read the article

  • CodePlex Daily Summary for Friday, December 10, 2010

    CodePlex Daily Summary for Friday, December 10, 2010Popular ReleasesFree Silverlight & WPF Chart Control - Visifire: Visifire Silverlight, WPF Charts v3.6.5 Released: Hi, Today we are releasing final version of Visifire, v3.6.5 with the following new feature: * New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. You can visit Visifire documentation to know more. http://www.visifire.com/visifirechartsdocumentation.php Also this release includes few bug fixes: * Chart threw exception while adding new Axis in Chart using Vi...PHPExcel: PHPExcel 1.7.5 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.UserVoice Helper for WebMatrix: UserVoice Helper v0.9: This version will work with ASP.NET WebPages and ASP.NET MVC ApplicationsDNN Simple Article: DNNSimpleArticle Module V00.00.03: The initial release of the DNNSimpleArticle module (labelled V00.00.03) There are C# and VB versions of this module for this initial release. No promises that going forward there will be packages for both languages provided for future releases. This module provides the following functionality Create and display articles Display a paged list of articles Articles get created as DNN ContentItems Categorization provided through DNN Taxonomy SEO functionality for article display providi...UOB & ME: UOB_ME 2.5: latest versionCouchDB.NET: CouchDB.NET 0.1: CouchDB.NET ------- Libraries and providers to use CouchDB features from .NET This distribution includes the following projects: - MachineKeyGenerator: Command line tool to generate a machine key string for use in App.Config and Web.Config files. - CouchDB.NET: Library to facilitate the use of CouchDB features. It uses Hadi Hariri's EasyHttp library to communicate with the CouchDB server. More info at: https://github.com/hhariri/EasyHttp - CouchDb.ASP.NET: ASP.NET Membership Provider and ASP...AutoLoL: AutoLoL v1.4.3: AutoLoL now supports importing the build pages from Mobafire.com as well! Just insert the url to the build and voila. (For example: http://www.mobafire.com/league-of-legends/build/unforgivens-guide-how-to-build-a-successful-mordekaiser-24061) Stable release of AutoChat (It is still recommended to use with caution and to read the documentation) It is now possible to associate *.lolm files with AutoLoL to quickly open them The selected spells are now displayed in the masteries tab for qu...SubtitleTools: SubtitleTools 1.2: - Added auto insertion of RLE (RIGHT-TO-LEFT EMBEDDING) Unicode character for the RTL languages. - Fixed delete rows issue.PHP Manager for IIS: PHP Manager 1.1 for IIS 7: This is a final stable release of PHP Manager 1.1 for IIS 7. This is a minor incremental release that contains all the functionality available in 53121 plus additional features listed below: Improved detection logic for existing PHP installations. Now PHP Manager detects the location to php.ini file in accordance to the PHP specifications Configuring date.timezone. PHP Manager can automatically set the date.timezone directive which is required to be set starting from PHP 5.3 Ability to ...Algorithmia: Algorithmia 1.1: Algorithmia v1.1, released on December 8th, 2010.SuperSocket, an extensible socket application framework: SuperSocket 1.0 SP1: Fixed bugs: fixed a potential bug that the running state hadn't been updated after socket server stopped fixed a synchronization issue when clearing timeout session fixed a bug in ArraySegmentList fixed a bug on getting configuration valueCslaGenFork: CslaGenFork 4.0 CTP 2: The version is 4.0.1 CTP2 and was released 2010 December 7 and includes the following files: CslaGenFork 4.0.1-2010-12-07 Setup.msi Templates-2010-10-07.zip For getting started instructions, refer to How to section. Overview of the changes Since CTP1 there were 53 work items closed (28 features, 24 issues and 1 task). During this 60 days a lot of work has been done on several areas. First the stereotypes: EditableRoot is OK EditableChild is OK EditableRootCollection is OK Editable...My Web Pages Starter Kit: 1.3.1 Production Release (Security HOTFIX): Due to a critical security issue, it's strongly advised to update the My Web Pages Starter Kit to this version. Possible attackers could misuse the image upload to transmit any type of file to the website. If you already have a running version of My Web Pages Starter Kit 1.3.0, you can just replace the ftb.imagegallery.aspx file in the root directory with the one attached to this release.EnhSim: EnhSim 2.2.0 ALPHA: 2.2.0 ALPHAThis release adds in the changes for 4.03a. at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Updated En...ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.4: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: popup WhiteSpaceFilterAttribute tested on mozilla, safari, chrome, opera, ie 9b/8/7/6nopCommerce. ASP.NET open source shopping cart: nopCommerce 1.90: To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).myCollections: Version 1.2: New in version 1.2: Big performance improvement. New Design (Added Outlook style View, New detail view, New Groub By...) Added Sort by Media Added Manage Movie Studio Zoom preference is now saved. Media name are now editable. Added Portuguese version You can now Hide details panel Add support for FLAC tags You can now imports books from BibTex Xml file BugFixingmytrip.mvc (CMS & e-Commerce): mytrip.mvc 1.0.49.0 beta: mytrip.mvc 1.0.49.0 beta web Web for install hosting System Requirements: NET 4.0, MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) mytrip.mvc 1.0.49.0 beta src System Requirements: Visual Studio 2010 or Web Deweloper 2010 MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) Connector/Net 6.3.4, MVC3 RC WARNING For run and debug mytrip.mvc 1.0.49.0 beta src download and ...Menu and Context Menu for Silverlight 4.0: Silverlight Menu and Context Menu v2.3 Beta: - Added keyboard navigation support with access keys - Shortcuts like Ctrl-Alt-A are now supported(where the browser permits it) - The PopupMenuSeparator is now completely based on the PopupMenuItem class - Moved item manipulation code to a partial class in PopupMenuItemsControl.cs - Moved menu management and keyboard navigation code to the new PopupMenuManager class - Simplified the layout by removing the RootGrid element(all content is now placed in OverlayCanvas and is accessed by the new ...MiniTwitter: 1.62: MiniTwitter 1.62 ???? ?? ??????????????????????????????????????? 140 ?????????????????????????? ???????????????????????????????? ?? ??????????????????????????????????New ProjectsAccountingGuid: for testing onlyChinese Nag Screen: This is a simple but effective program for learning to recognize Mandarin characters. The application sits in the system tray and displays a character random through your day. You can only get rid of it by typing in the pinyin.CouchDB.NET: .NET libraries to use CouchDB from .NET. Included are Membership and Roles provider so that you may use CouchDB as your integrated DB backend on your ASP.NET projects. Please see the readme.txt file for instructions.DataSetMapper: The idea behind DataSetMapper is to provide support for the automatic mapping of legacy DataSet based structures to proper domain objects. In essence the aim is to create the Mapping aspect of an ORM without the persistence concerns.EasyXnaAudio: EasyXnaAudio is a simple component for use in XNA Game Studio 3.1/4.0 projects that provides an easy interface to load, play, and manage songs and sounds in your game.FixMailboxSD - Exchange Mailbox Security Descriptor Canonicalizer: This is a small utility to fix mailbox security descriptors in Microsoft Exchange that have become non-canonical. It must be run on a machine with Exchange System Manager for Exchange 2003 installed, but it will work against mailboxes on 2003 or 2007 (not 2010).GearSynth Plugin: a plugin for graphsynth that makes gear trainsGroceryList: TBD with first versionIBMS Suite Build on the Associate Platform: A new way of approaching Information Systems. From the UI, users of the IS will be able to build and manipulate the IS to whatever way fits their needs. We have simplified development, removed the chasm between management and IT and give the power of simplification to the user!Ivy Nasha Framework: A PHP FrameworkjQuery helpers for ASP.NET and ASP.NET MVC: jQuery helpers makes it easier for ASP.NET developers to build jQuery scripts. It's developed in C#. JSTest.NET: JSTest.NET enabled JavaScript unit tests to be run directly in the test framework of your choice (MSTest, NUnit, xUnit, etc) and all without the need for a web browser. JSTest.NET utilizes the Windows Script Host (CScript) to run fast, fully debuggable JavaScript unit tests!Multicore Task Framework: MTF is a visual tool to simplify building robust component based .NET applications. MTF is designed to make full use of the power of multi-core processors.Nazha Script On DLR: NazhaPascalESE - a Delphi/Pascal class library for Microsoft ESENT database API: This pascal class library, primarily written for Delphi's Object Pascal, provides a lightweight and easy-to-use wrapper around the ESENT API. Perpetuum Hangar: A Character planner for the online game "Perpetuum"Projeto Exemplo: Projeto exemplo para a atividade 3 da disciplina.PSiteCode: PSiteCode Manager rScript Engine: rScript scripting engine is a managed script engine wrote in C# that supports Visual Basic and C# syntax based scripts. It provides Type's for dynamically getting and setting properties, invoking methods and run-time compilation of scripts.SharePoint 2010 User Profile WebPart: This webpart shows all user profile properties and values of the properties for a particular user profile. The results are shown in a table containing the display and technical name together with the user value.SHC: shriSHMTools: SHMTools is set of compatible software tools (mostly Matlab based) for structural health monitoring (SHM) research. This includes algorithms for system design, modeling, data acquisition, feature extraction, classification, and prognosis.SwapWin: SwapWin is a tiny and handy tool which swaps windows on different screens. Developed in C# and .NET 3.5.Teachers Diary: Teachers diary is application realizing electronic teacher's notepad with student marks. Current localization of the application is in czech language only.VkApp: Vk app for downloadingWebSpirit: A lightweighted web server implemented by C# which supports sufficient extendible feature. By zjuWPF & MEF Studio: WPF & MEF Studio

    Read the article

  • Ant get task throws "get doesn't support nested resources element" error

    - by David Corley
    The following ant xml should work according to documentation, but does not. Can anyone tell me if I'm doing something wrong. The get task should support the nested "resources" element in Ant 1.7.1 which is the version I'm using: -- <target name="setup"> <tstamp/> <!-- set up work areas --> <!--<taskdef name="ccmutil" classname="com.allfinanz.framework.tools.CCMUtil" classpath="\\Abate\Data\Build_Lib\Ivy\com.allfinanz\ccmutil\1.0\ccmutil-1.0.jar"/>--> <!-- 1st one is special, also sets ${project_wa} --> <!--<ccmutil file="${ant.file}" projects="framework, xpbuw, xpb, bil"/>--> <property name="framework_wa" value="../../../framework"/> <property name="xpbuw_wa" value="../../../xpbuw"/> <property name="xpb_wa" value="../../../xpb"/> <property name="bil_wa" value="../.."/> <!-- Create properties to hold the build values --> <property name="out" value="${user.dir}"/> <!-- This may be overridden from the command line --> <property name="locale" value="us"/> <!-- set contextRoot up as a property - this mean that it can be overwritten from the command line e.g.: ant -DcontextRoot=xpertBridge. --> <property name="contextRoot" value="xpertBridge"/> <property name="build_dir" value="${out}/${release}/build"/> <property name="distrib_dir" value="${out}/${release}/distrib"/> <property name="build.number" value="-1"/> <!-- Download dependencies from repo.fms.allfinanz.com--> <get dest="${lib}"> <resources> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=central&amp;g=soap&amp;a=soap&amp;v=2.3.1&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=JBOSS&amp;g=apache-fileupload&amp;a=commons-fileupload&amp;v=1.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=regexp&amp;a=regexp&amp;v=1.1&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=javax.mail&amp;a=mail&amp;v=1.2&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=com.ibm.ws.webservices&amp;a=webservices.thinclient&amp;v=6.1.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=avalon-framework&amp;a=avalon-framework&amp;v=4.2.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=jimi&amp;a=jimi&amp;v=1.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=batik&amp;a=batik-all&amp;v=1.6&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=bsf&amp;a=bsf&amp;v=2.3.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=rhino&amp;a=js&amp;v=1.5R3&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=central&amp;g=commons-io&amp;a=commons-io&amp;v=1.1&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=central&amp;g=commons-logging&amp;a=commons-logging&amp;v=1.0.4&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=xmlgraphics&amp;a=commons&amp;v=1.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=barcode4j&amp;a=barcode4j&amp;v=trunkBIL&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=com.ibm&amp;a=fmcojagt&amp;v=6.1&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=com.allfinanz&amp;a=ejbserversupport&amp;v=1.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=com.sun&amp;a=jce&amp;v=1.0&amp;e=zip"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=ssce&amp;a=ssce&amp;v=5.8&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=com.ibm&amp;a=mq&amp;v=5.1&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=com.ibm&amp;a=mqjms&amp;v=5.1&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=NetServerRemote&amp;a=NetServerRemote&amp;v=1.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=NetServerRMI&amp;a=NetServerRMI&amp;v=1.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=jwsdp&amp;a=saaj-api&amp;v=1.5&amp;e=jar&amp;c=api"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=jwsdp&amp;a=saaj-impl&amp;v=1.5&amp;e=jar&amp;c=impl"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=org.apache.xmlgraphics&amp;a=fop&amp;v=0.92b&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=xerces&amp;a=dom3-xml-apis&amp;v=1.0&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=org.apache&amp;a=derbynet&amp;v=10.0.2&amp;e=jar"/> <url url="http://repo.fms.allfinanz.com/service/local/artifact/maven/redirect?r=thirdparty&amp;g=com.sun&amp;a=jsse&amp;v=1.0&amp;e=jar"/> </resources> </get> </target>

    Read the article

< Previous Page | 2 3 4 5 6