Search Results

Search found 27308 results on 1093 pages for 'nvidia current dev'.

Page 6/1093 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• Dual NVidia graphics cards in Ubuntu / xorg.conf mania

  - by John Zwinck

  I have two NVidia graphics cards: Quadro NVS 295 (PCI Express, dual DisplayPort outputs) GeForce FX 5200 (PCI, DVI and VGA outputs) I have three identical monitors, two on DisplayPort and one on DVI. I'm on Ubuntu Hardy (and cannot currently dist-upgrade for separate reasons). I use the "nvidia" driver. What's new is the GeForce card and the third monitor. I currently have the dual DisplayPort monitors working fine. Here are the display-related parts of my xorg.conf: Section "ServerLayout" Identifier "Default Layout" Screen "PCI-Express Screen" 0 0 # adding this makes X fail to start: Screen "PCI Screen" 0 Inputdevice "Generic Keyboard" Inputdevice "Configured Mouse" EndSection Section "Module" Load "glx" # not sure why/if this is needed EndSection Section "Monitor" Identifier "DELL 2408WFP" Option "DPMS" EndSection Section "Device" Identifier "NVIDIA Quadro NVS 295" Driver "nvidia" Option "RenderAccel" "true" Screen 0 BusID "PCI:2:0:0" EndSection Section "Device" Identifier "NVIDIA GeForce FX 5200" Driver "nvidia" Option "RenderAccel" "true" Screen 1 BusID "PCI:6:4:0" EndSection Section "Screen" Identifier "PCI-Express Screen" Device "NVIDIA Quadro NVS 295" Monitor "DELL 2408WFP" Defaultdepth 24 Option "TwinView" "True" Option "UseEdidFreqs" "True" Option "MetaModes" "1920x1200 +0+1200, 1920x1200 +0+0" EndSection Section "Screen" Identifier "PCI Screen" Device "NVIDIA GeForce FX 5200" Monitor "DELL 2408WFP" Defaultdepth 24 Option "TwinView" "True" Option "UseEdidFreqs" "True" Option "MetaModes" "1920x1200 +0+0" EndSection I use nvidia-settings to configure my monitors, and it does not show the second GPU. lspci, though, shows: 02:00.0 VGA compatible controller: nVidia Corporation Unknown device 06fd 06:04.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] Which is where I got the BusID settings for the two devices (when I just had one device, I didn't have any BusID listed...and adding the BusID hasn't broken anything). What am I missing? How can I make nvidia-settings show my second GPU so I can then configure its monitor?

  Read the article

• Ubuntu openGL issues

  - by Dank101

  my OpenGL doesn't work at all i get Xlib: extension "GLX" missing on display ":0". lspci output 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:1246] (rev a1) (prog-if 00 [VGA controller]) dmesg | grep -i nvid [ 9.469068] nvidia: module license 'NVIDIA' taints kernel. [ 9.538786] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.538792] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.538796] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 9.538803] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.538809] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.538942] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.48 Sun Sep 9 [10300.955799] nvidia 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [10300.955803] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfff80000) [10300.955807] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0x4001) [10300.955811] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0xc, writing 0xd000000c) [10300.955814] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xc000000c) [10300.955817] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0000000) [10300.955820] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x10) [10300.955823] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100007) my computer is a dell XPS l702x

  Read the article

• can't update nvida having error near the end of the install

  - by user94843

  I had just got Ubuntu (first timer to Ubuntu so be very descriptive). I think there a problem with my Nvida update it won't let me update it. This is the name of the update in update manager NVIDIA binary xorg driver, kernel module and VDPAU library. When i attempt to install it, it starts out fine but near the end i get a window titaled package operation failed with these under the details installArchives() failed: Setting up nvidia-current (295.40-0ubuntu1) ... update-initramfs: deferring update (trigger activated) INFO:Enable nvidia-current DEBUG:Parsing /usr/share/nvidia-common/quirks/put_your_quirks_here DEBUG:Parsing /usr/share/nvidia-common/quirks/dell_latitude DEBUG:Parsing /usr/share/nvidia-common/quirks/lenovo_thinkpad DEBUG:Processing quirk Latitude E6530 DEBUG:Failure to match Gigabyte Technology Co., Ltd. with Dell Inc. DEBUG:Quirk doesn't match DEBUG:Processing quirk ThinkPad T420s DEBUG:Failure to match Gigabyte Technology Co., Ltd. with LENOVO DEBUG:Quirk doesn't match Removing old nvidia-current-295.40 DKMS files... Loading new nvidia-current-295.40 DKMS files... Error! DKMS tree already contains: nvidia-current-295.40 You cannot add the same module/version combo more than once. dpkg: error processing nvidia-current (--configure): subprocess installed post-installation script returned error exit status 3 Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-31-generic Warning: No support for locale: en_US.utf8 Errors were encountered while processing: nvidia-current Error in function: Setting up nvidia-current (295.40-0ubuntu1) ... update-initramfs: deferring update (trigger activated) INFO:Enable nvidia-current DEBUG:Parsing /usr/share/nvidia-common/quirks/put_your_quirks_here DEBUG:Parsing /usr/share/nvidia-common/quirks/dell_latitude DEBUG:Parsing /usr/share/nvidia-common/quirks/lenovo_thinkpad DEBUG:Processing quirk Latitude E6530 DEBUG:Failure to match Gigabyte Technology Co., Ltd. with Dell Inc. DEBUG:Quirk doesn't match DEBUG:Processing quirk ThinkPad T420s DEBUG:Failure to match Gigabyte Technology Co., Ltd. with LENOVO DEBUG:Quirk doesn't match Removing old nvidia-current-295.40 DKMS files... Loading new nvidia-current-295.40 DKMS files... Error! DKMS tree already contains: nvidia-current-295.40 You cannot add the same module/version combo more than once. dpkg: error processing nvidia-current (--configure): subprocess installed post-installation script returned error exit status 3 Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-31-generic Warning: No support for locale: en_US.utf8

  Read the article

• How to install OpenCV without nVidia drivers

  - by Subhamoy Sengupta

  I have a laptop with on-board Intel graphics. I have been using OpenCV for years with this machine and I have managed to avoid manual compilation so far. But in Ubuntu 13.10, when I try to install libopencv-dev from the repositories, it brings along libopencv-ocl, which seems to be dependent on nvidia drivers. Letting the driver install messes up my xserver completely and when I do glxinfo afterwards, I get this: name of display: :0.0 Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". To solve this, I purge all nVidia drivers and reinstall xserver, much like it has been suggested here, and when I purge the nvidia drivers, OpenCV development libraries are also removed, as apt-get tells me they are no longer needed. This is foreign to me, because I expected a warning that I have installed packages that depend on this, but how can removing a dependency automatically remove the package I installed without warnings or asking? I understand it has something to do with nVidia being the provider of the libopencv-ocl in the repo. How could I get around it? I would rather not compile OpenCV if I can help it. I have seen similar questions, but not a suitable answer.

  Read the article

• How to fix no splash screen in Ubuntu after nvidia proprietary driver installation (also black borders)

  - by Fabio Trevisiol

  This is soultion how to fix no splash screen in Ubuntu after nvidia proprietary driver installation. It's no matter what Ubuntu version you use, it should work anyway. (TESTED ON 14.04) Open your terminal and type: sudo apt-get install v86d (TEST WITHOUT) Then: sudo gedit /etc/default/grub Find this line: #GRUB_GFXMODE=640x480 Add below (of course choose your resolution): GRUB_GFXMODE=1024x768x32 (TRY WITHOUT OR DIFFERENT BIT DEPTH) GRUB_GFXPAYLOAD_LINUX=1920x1080x32 (YOU CAN ALSO USE THE KEEP OPTION) Save file and type in terminal: echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash (ALLOWS TO AVOID THAT THE SPLASH SCREEN IS DISPLAYED FOR A FEW SECONDS) sudo update-initramfs -u sudo update-grub2 For all those who complain about the presence of black borders in "plymouth", try to make these changes before installing the nvidia driver or switch back from nvidia to nouveau and from nouveau to nvidia. Kernel update from the Software Updater? It happened to me; I don't know if it matters. I don't know for which of these reasons, but after a few reboots, the black borders are gone. UPDATE discovered the secret: during all these beautiful things, something strange happened. glxinfo | grep vendor server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: nouveau

  Read the article

• NVIDIA Graphics - resolution problems with new 12.04 LTS installation

  - by Daveisuser56810

  I've been trying to install Ubuntu 12.04 LTS on my desktop most of the day. The desktop uses a NVIDIA GEFORCE 9800 (GT I think) graphics card. I am unable to set the correct resolution (1680 x 1050) for the display. The first problem I had was that of the "Black Screen" during install. I overcame this by utilising the "nomodeset" switch on the install options (once I'd found how to do that). The second problem of course was the "Black screen" following the first reboot. Once again this was overcome by using "nomodeset", this time by "editing" the GRUB. This gave me a resolution of 1280x768 which, the Displays GUI allowed me to change to 1280x720 (appears to fit on screen). I then tried to install the NVIDIA drivers. 1) using additional drivers 2) manually by downloading driver and installing in root As soon as NVIDIA drivers are installed - resolution become restricted to 640x480 (max). At this resolution Ubuntu GUI is not usable as most screens are larger than the display. Removing the NVIDIA driver and removing the XORG.CONF file does not lift this restriction. I have tried most things that I have found and that were vaguely intelligible, but nothing appears to get me closer to a resolution of 1680x1050. UPDATE: reinstalled Ubuntu 12-04 and used the "NoModeSet" in the Grub to restore the resolution to 1280x720, which is at least usable. Will live with this for now.

  Read the article

• Compiz slow under proprietary nvidia driver

  - by gsedej

  Hi! I am using Ubuntu 10.10 and have problem with proprietary nvidia driver for my GeForce GTS 250. I have issue with poor Compiz performance. And there is also open-source "noueau" driver. Proprietary: I tried many versions but neither works fast on desktop. This means 30 FPS without heavy effects. Currently I am using version 270.18. Even normal desktop use feels bad (moving windows) In games (and 3D benchmark) it is really good! (Unigine Heaven works good!) Open-source "nouveau": Very fast on desktop with heavy effects (blur, ...). I have 300 FPS and more, even in Expo mode. Games were good but not as good as prop. And driver causes xorg to crash even the latest (ppa:xorg-edgers/nouveau), so I switched back to proprietary. I also have computer with Ubuntu 10.04, GeForce 8600GT and drivers around 185.x and Compiz works great there. There is similar question Nvidia proprietary driver performance in 10.10 Which version of nvidia (prop) driver is fast in Compiz in Ubuntu 10.10? How do you install a specific version of nvidia driver? Is it the case that each newer driver works slower on compiz?

  Read the article

• Getting Unity 3D working on legacy Nvidia card

  - by user69545

  I installed the latest nVIDIA drivers for my FX5500 card. I understand that the X server version does not officially support this driver or card but was wondering what I can do to get compiz running. I have researched for hours on this issue but cannot come up with an answer for myself. I might be doing all this for nothing but I wanted to at least try. Here is the output of my test: mike@mike-linux-box:~$ /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce FX 5500/AGP/SSE2 OpenGL version string: 2.1.2 NVIDIA 173.14.35 Not software rendered: yes Not blacklisted: no GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no So I was wondering what is the "Not Blacklisted" test? Is this the Nouveau Blacklisting? nVIDIA driver did that automatically. Does this need to be removed? Any help would be appreciated. I just want to run compiz effects. Thanks.

  Read the article

• How to install nvidia drivers (GT 440 ) on Xubuntu 12.10 , screen res gone to 640x480 :(

  - by shaggyjack

  Hi all after days of endless googling I finally gave in and decided to try and directly ask for help. I have just installed Xubuntu and updated to 12.10 on a pretty old (12 years) machine, and I am now struggling to install the correct drivers for the nvidia 440 gt card.. I have managed to get "additional drivers" but the app does not show in the menu, I went through a few procedures which ended up in my screen going no higher than 640x480, and tried all the sudo apt-get variations with nvidia-current and current updates... I think I got the right version of the drivers ( 93.43.07 ) but they won't install from terminal as they say I am running an X server. So I learnt how to shut the graphic interface but then I try and install them from there but after I write the exact same command (sudo home/username/Downloads/NVIDIA-Linux-x86-96.43.07.pkg1.run ) nothing happens and the terminal says something like command not found. I am desperate for help if anybody could point me in the right direction that would be greatly appreciated. There are lots of similar topics on installing nvidia drivers but I seem to understand that current drivers are no good for my old GPU. So if anybody could show me how to install the right version that would be excellent. Thanks in advance! Jack

  Read the article

• nvidia: switching dvi socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Trying to install Proprietory Nvidia Graphics Drivers

  - by Peter Snow

  After reading and trying many different suggestions for some hours, I returned to this how-to: https://help.ubuntu.com/community/BinaryDriverHowto/Nvidia The first problem I encounter is how to identify which of the listed drivers support my Nvidia GEForce 630M graphics card. Following the links doesn't really help, since it is not stated there either (except where support for a new driver was added later which is explicitly stated, but the original devices covered are not). However, even if I knew, if it doesn't appear in the 'Additional Drivers' dialogue (see below), how will I install it? Second Issue: The article goes on to say that available drivers for my hardware are usually listed in 'Additional Drivers'. In my case, they aren't. Unfortunately, it doesn't tell me how to correct that or work around it? I've checked the bios and there is no way offered there to disable the integrated graphics, only the Nvidia graphics. I've also tried each available option in this: $ sudo update-alternatives --config i386-linux-gnu_gl_conf My system is an Acer Aspire 4752G bought May 2012. I'm running Ubuntu 12.04LTS. uname -a : 3.2.0-38-generic-pae #61-Ubuntu SMP Tue Feb 19 12:39:51 UTC 2013 i686 i686 i386 GNU/Linux It's 64bit hardware but I installed 32bit OS for greater software compatibility. Running $ sudo tail -fn 500 /var/log/Xorg.0.log | grep '(EE)' returns" (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 28.886] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) The reason for wanting the proprietor y drivers is because my laptop comes with 3D accelerated graphics adaptor and so rather than confining myself to struggling with the on-board graphics, I would rather use it. I also want to experiment with using it for bitmining (which uses the GPU's for computing power).

  Read the article

• Impossible quandrary involving UCK, graphics card, and Nvidia drivers

  - by InkBlend

  I have a computer that I want to install Ubuntu on. It is an older gaming computer with a Nvidia graphics card. When I attempt to boot any unmodified Linux distribution onto it, I get a "Boot error" message, which I assume is because the computer uses a discrete graphics card, which the Linux kernel does not have support for. Ordinarily, that would not be a problem, as I would just plug the monitor into the VGA port built in to the motherboard. However, this particular model of motherboard does not have an on-board graphics connector, so I am stuck with using the graphics card connection. That further would not be a problem; all I would have to do would be to use UCK to create a customized Ubuntu image that included the graphics drivers. Except for the fact that the Nvidia Linux drivers must be installed on a computer with a Nvidia graphics card present. So while using UCK, the driver installer fails with a message stating that there is no Nvidia graphics card present. How do I get Ubuntu on my desktop computer?

  Read the article

• HDA NVidia (GT520) - Sound Issue

  - by Oliver Lucas

  I have an GT520 graphics card and I am trying to get the sound working with my XBMC setup and I'm having trouble. Things I have completed: aplay -l List of PLAYBACK Hardware Devices card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 then lspci 01:00.1 Audio device: nVidia Corporation HDMI Audio stub (rev a1) and alsamixer which is set to unmuted Everything looks well, so ran: aplay -D hw:0,3 /home/ollie/Music/alex.mp3 Playing raw data '/home/ollie/Music/alex.mp3' : Unsigned 8 bit, Rate 8000 Hz, Mono aplay: set_params:1059: Sample format non available Available formats: - S16_LE - S32_LE with no luck.. then speaker-test Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise Playback open error: -2,No such file or directory also tried running through ftp://download.nvidia.com/XFree86/gpu-hdmi-audio-document/gpu-hdmi-audio.html#upgrading_alsa_driver and http://wiki.xbmc.org/index.php?title=HOW-TO:Setup_audio_over_HDMI_on_nVidia_GeForce/nForce_controller plus 20 other websites with selective "fixes" etc.. but no luck _< I am a complete beginner with Ubuntu so this is a really steep learning curve for me, not sure I'm learning much though as its all just headaches atm! Thanks for any help Ollie

  Read the article

• Problems with nvidia drivers

  - by Crs2489

  I have a problem that I haven't been able to find a solution to. I recently decided to switch from Windows to Ubuntu 11.10, so I originally installed Ubuntu using the wubi installer for windows. After I installed Ubuntu with wubi I installed drivers for nvidia using the additional drivers from system setting and everything worked fine. I then decided that I no longer wanted windows on my computer because i was having problems with it crashing when I went to remove the partition with windows on it using an Ubuntu Live CD I made I found that there were unrepairable problems with both of my partitions so I decided to delete both partitions and install Ubuntu again from the cd now when I try to install nvidia drivers my gui will not load when i start my computer. I have found people who have had similar problems with the gui not loading after installing nvidia drivers but no one who had there gui working after installing with wubi then not working after installing from a cd. I'm using Ubuntu 11.10 32 I have also tried other versions of linux like openSUSE and have had the same problem with the gui not being able to load after installing nvidia drivers.

  Read the article

• Problem video nvidia ubuntu 12.04

  - by dragonov7

  I just did a fresh install of ubuntu 12.04 on my PC (Dell precision 370) but the video is not working as it should. Problems: When I log in to unity 3D I get a transparent bar (where the firefox, libre office, etc icons are) but I can see the tooltips when I put my mouse over where the icons are, I can see the top toolbar with no problem and I see just white on the rest of the desktop! When I log in using unity 2D I see the left bar cut in half (so I can't see the trash icon that is at the botton), the toolbar at the top shows OK and the desktop show OK but with some apps. For example, if I open a terminal and maximize it, it will only show just where the left toolbar "cuts". But if I open firefox it will open fine. Config: My PC comes with a nvidia quadro nvs 280 and I see that by default ubuntu is using the nouveau driver. Workarounds tried: I tried uninstalling the nouveau driver and the desktop works fine but I can use only unity 2D. I tried installing the nvidia-173 drivers using synaptic but I get "Could not apply changes! Fix broken packages first". I go to "Edit - Fix Broken packages" and I get the error: "E: Unable to correct problem, you have held broken packages.E: Error, PkgProblemResolver::Resolve generated breakes, this may be caused by held packages.E:Unable to correct dependencies" Output of lspci: 01:00.0 VGA compatible controller: NVIDIA Corporation NV37GL [Quadro PCI-E Series] (rev a2) Any idea so as to what I should do? Thanks in advance for any help. PS: Ah, the nvidia-173 driver was working fine on ubuntu 10.04.

  Read the article

• NVIDIA graphics driver on Macbook Pro 10,1

  - by Boatzart

  I just installed 14.04 over my old 12.04 partition on my Macbook Pro 10,1 (which is dual-booting with OS X) by following the instructions here. The only difference is that I'm using rEFInd instead of rEFIt. The proprietary NVIDIA drivers worked great with 12.04, but now I'm unable to boot into Unity with it in 14.04. Generally, I just get a black screen after the Grub menu, though occasionally I get some kind of panic screen like this, where I see errors like: [drm: __gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake old ack to clear. [drm: __gen6_gt_wait_for_thread_c0] *ERROR* GT thread status wait timed out [drm: __intel_ring_setup_status_page] *ERROR* render ring: wait for SyncFlush to complete for TLB invalidation timed out etc. Using the nouveau drivers works fine, but everything feels sluggish so I would really like to get the NVIDIA drivers working. Has anyone successfully gotten the NVIDIA drivers working with the GT-650M Mac Edition?

  Read the article

• GNOME Shell Overview animation is slow on my NVIDIA 320M

  - by AllanCaeg

  I'm running Ubuntu 10.10 on my MacBook Air 11" (late 2010 model 3,1). Compiz runs fine, as well as most of GNOME Shell's animations. The animation for switching to and from GNOME Shell overview is just very slow. Unfortunately, it's the most common animation on Shell. I already applied cd ~/gnome-shell/source/gnome-shell curl http://bugzilla-attachments.gnome.org/attachment.cgi?id=157326 > shell-animations-nvidia.patch git am shell-animations-nvidia.pat that I found from http://live.gnome.org/GnomeShell/SwatList , but the issue's still here. How do I fix this? EDIT: Apparently, it's an NVIDIA driver bug, which has something to do with the message tray. Is this correct? How do I go around this issue?

  Read the article

• How do I rotate my monitor using xorg?

  - by user1106405

  I have just installed KUbuntu 12.10, and I am attempting to rotate my monitor 90 deg to the left. When I add the option to rotate, the monitor seems to ignore the directive. I'm currently using dual 02:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) and NVidia driver version 310 My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 310.14 (buildmeister@swio-display-x86-rhel47-06.nvidia.com) Tue Oct 9 13:04:01 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 1280 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 60.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 1908WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 1 EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select @1920x1080 +0+0; DFP-0: nvidia-auto-select @1920x720 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-2: nvidia-auto-select +0+0" Option "Rotate" "left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" EndSection Edit: If I delete the xorg.conf and reboot, I am able to rotate my monitor, however, my third monitor is not recognized: Screen 0: minimum 8 x 8, current 3360 x 1200, maximum 16384 x 16384 DVI-I-0 disconnected (normal left inverted right x axis y axis) DVI-I-1 disconnected (normal left inverted right x axis y axis) DVI-I-2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 60.0 1280x960 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-I-3 connected 1440x900+1920+0 (normal left inverted right x axis y axis) 408mm x 255mm 1440x900 59.9*+ 75.0 1280x1024 75.0 60.0 1280x800 59.8 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 640x480 75.0 72.8 59.9

  Read the article

• Need a non-X terminal for the nvidia driver installation

  - by broiyan

  When I try to install the nvidia driver for my video card, I receive an error message. ERROR: You appear to be running an X server; please exit X before installing. For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at www.nvidia.com. I wasn't able to find the README on the website but how do I create a terminal that is non-X? I am on 12.04.

  Read the article

• Mint 13 no longer using NVidia card after restart

  - by GenericUsrnme

  Here's the story; I bought a new graphics card, along with other parts, about a week ago. I put them in, install new drivers everything's working fine. Now after a restart I boot into some lovely 1024x768 resolution with only one screen on. I check in the NVidia X Server settings to see if my screen was changed there, there's nothing there except Application profiles and nvidia-settings. I check hardinfo to see if the card is actually recognised; VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 660] (rev a1) (prog-if 00 [VGA controller]) I don't really know much about the graphics end of things so I'm not sure what I should be doing here to fix this, I don't even know what I should be looking FOR even, so any help is much appreciated! Thanks in advance

  Read the article

• NVidia control panel SSAO not working

  - by János Turánszki

  I am just before implementing screen space ambient occlusion in my game, but first I wanted to try enabling it from NVidia control panel only to find out that it is greyed out so that I can not enable it. With this I could enable SSAO for some other games, but not every one. I know this technique requires the depth buffer and (optionally) a normal map texture to sample information from which I already have access to given I have a deferred renderer working. After that I actually thought to roll back to a previous version of my game which still uses forward rendering so the depth buffer is actually bound to the backbuffer which I render to from the get-go so that maybe the NVidia control panel would somehow make use of it. It was not working with forward rendering either. (I also tried FXAA in the control panel and that works - but it doesn't need any depth or normal texture) So my question is that how can I enable this function so that it would work by enabling it in the NVidia control panel?

  Read the article

• Issues with nVidia GeForce 210 while watching movies

  - by David ???

  Ever since 10.04 I have been trying to resolve an issue with my graphics card - nVidia GeForce 210. I'm having issues when I watch movies - they are jumping all the time, even with Compiz disabled and when that is the only thing I am doing. I have tried the solution to How to get NVidia GeForce GT 210 drivers working on Lucid Lynx? but it didn't work. How can I fix this? Here are the steps I took: apt-get --purge remove xserver-xorg-video-nouveau edit /etc/default/grub to add the line GRUB_CMDLINE_LINUX="nouveau.modeset=0" sudo update-grub Reboot Download official Linux drivers from nVidia site. sh filename-of-downloaded-driver-package

  Read the article

• Issues with nVidia GeForce 210 while watching movies

  - by David ???

  Ever since 10.04 I have been trying to resolve an issue with my graphics card - nVidia GeForce 210. I'm having issues when I watch movies on 10.10 - they are jumping all the time, even with Compiz disabled and when that is the only thing I am doing. I have tried the solution to How to get NVidia GeForce GT 210 drivers working on Lucid Lynx? but it didn't work. How can I fix this? Here are the steps I took: apt-get --purge remove xserver-xorg-video-nouveau edit /etc/default/grub to add the line GRUB_CMDLINE_LINUX="nouveau.modeset=0" sudo update-grub Reboot Download official Linux drivers from nVidia site. sh filename-of-downloaded-driver-package

  Read the article

• Ubuntu 13.10 - Black screen after logging in after installing nVidia drivers

  - by Javacow

  I recently installed Ubuntu 13.10 in a dual-boot with Windows 7, so I'm still quite new to using Linux. Most things were working fine, and I could log in normally (apart from the first login after install, which spent about 2 minutes on a black screen before going to the desktop). I installed the restricted Nvidia drivers with the command: sudo apt-get install nvidia-current Since then, after I enter my password and log in (the login screen itself works perfectly), I get a black screen with the cursor and nothing happens from that point onwards. Basically, what I would like to know is how to get back to the normal Ubuntu desktop and (hopefully) still be able to use Nvidia drivers.

  Read the article

• It appears you are running a x server NVIDIA Drivers 304.02 Ubuntu 12.04

  - by user93444

  So I went to NVIDIA's site and I saw they had a version with a lot of bug fixes. http://www.geforce.com/drivers/results/49073 and I downloaded it, I ran the .run file rooted. It keeps saying "It appears you are running a x server" I don't have any current NVIDIA driver installed, I tried the nvidia x-config thing but that didn't work. It just says it can't be found. Should I wait until that version gets on Ubuntu's software center? I don't feel like installing their old and bad version of the drivers.

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >