Search Results

Search found 4337 results on 174 pages for 'binary runner'.

Page 60/174 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

  • What to set the scalar type to contain a byte []. Entity in MVC2

    - by Brad8118
    I'm trying out the EF 4.0 and using the Model first approach. I'd like to store images into the database and I'm not sure of the best type for the scalar in the entity. I currently have it(the image scalar type) setup as a binary. From what I have been reading the best way to store the image in the db is a byte[]. So I'm assuming that binary is the way to go. If there is a better way I'd switch. In my controller I have: //file from client to store in the db HttpPostedFileBase file = Request.Files[inputTagName]; if (file.ContentLength > 0) { keyToAdd.Image = new byte[file.ContentLength]; file.InputStream.Write(keyToAdd.Image, 0, file.ContentLength); } This builds fine but when I run it I get an exception writing the stream to keyToAdd.Image. The exception is something like: Method does not exist. Any ideas? Note that when using a EF 4.0 model first approach I only have int16, int32, double, string, decimal, binary, byte, DateTime, Double, Single, and SByte as available types. Thanks

    Read the article

  • Help with router and spotty wireless...

    - by Moshe
    Time Warner Cable/ Road Runner router shows up some times on the network list on Mac OS X 10.6.3 Snow Leopard. It makes a spotty appearence on the list. The router is a SMC Networks Model # SMC8014WG-SI. The default gateway numbers all do not work. 192.168.0.1 192.168.1.1 192.168.2.1 10.10.10.1 What IP adress am I looking for here to log in to the router to fix the issue?

    Read the article

  • Error when pushing to Heroku - ...appear in group - Ruby on Rails

    - by bgadoci
    I am trying to deploy my first rails app to Heroku and seem to be having a problem. After git push heroku master, and heroku rake db:migrate I get an error saying: SELECT posts.*, count(*) as vote_total FROM "posts" INNER JOIN "votes" ON votes.post_id = posts.id GROUP BY votes.post_id ORDER BY created_at DESC LIMIT 5 OFFSET 0): I have included the full error below and also included the PostControll#index as it seems that is where I am doing the grouping. Lastly I included my routes.rb file. I am new to ruby, rails, and heroku so sorry for simple/obvious questions. Processing PostsController#index (for 99.7.50.140 at 2010-04-21 12:50:47) [GET] ActiveRecord::StatementInvalid (PGError: ERROR: column "posts.id" must appear in the GROUP BY clause or be used in an aggregate function : SELECT posts.*, count(*) as vote_total FROM "posts" INNER JOIN "votes" ON votes.post_id = posts.id GROUP BY votes.post_id ORDER BY created_at DESC LIMIT 5 OFFSET 0): vendor/gems/will_paginate-2.3.12/lib/will_paginate/finder.rb:82:in `send' vendor/gems/will_paginate-2.3.12/lib/will_paginate/finder.rb:82:in `paginate' vendor/gems/will_paginate-2.3.12/lib/will_paginate/collection.rb:87:in `create' vendor/gems/will_paginate-2.3.12/lib/will_paginate/finder.rb:76:in `paginate' app/controllers/posts_controller.rb:28:in `index' /home/heroku_rack/lib/static_assets.rb:9:in `call' /home/heroku_rack/lib/last_access.rb:25:in `call' /home/heroku_rack/lib/date_header.rb:14:in `call' thin (1.0.1) lib/thin/connection.rb:80:in `pre_process' thin (1.0.1) lib/thin/connection.rb:78:in `catch' thin (1.0.1) lib/thin/connection.rb:78:in `pre_process' thin (1.0.1) lib/thin/connection.rb:57:in `process' thin (1.0.1) lib/thin/connection.rb:42:in `receive_data' eventmachine (0.12.6) lib/eventmachine.rb:240:in `run_machine' eventmachine (0.12.6) lib/eventmachine.rb:240:in `run' thin (1.0.1) lib/thin/backends/base.rb:57:in `start' thin (1.0.1) lib/thin/server.rb:150:in `start' thin (1.0.1) lib/thin/controllers/controller.rb:80:in `start' thin (1.0.1) lib/thin/runner.rb:173:in `send' thin (1.0.1) lib/thin/runner.rb:173:in `run_command' thin (1.0.1) lib/thin/runner.rb:139:in `run!' thin (1.0.1) bin/thin:6 /usr/local/bin/thin:20:in `load' /usr/local/bin/thin:20 PostsController def index @tag_counts = Tag.count(:group => :tag_name, :order => 'count_all DESC', :limit => 20) conditions, joins = {}, :votes @ugtag_counts = Ugtag.count(:group => :ugctag_name, :order => 'count_all DESC', :limit => 20) conditions, joins = {}, :votes @vote_counts = Vote.count(:group => :post_title, :order => 'count_all DESC', :limit => 20) conditions, joins = {}, :votes unless(params[:tag_name] || "").empty? conditions = ["tags.tag_name = ? ", params[:tag_name]] joins = [:tags, :votes] end @posts=Post.paginate( :select => "posts.*, count(*) as vote_total", :joins => joins, :conditions=> conditions, :group => "votes.post_id", :order => "created_at DESC", :page => params[:page], :per_page => 5) @popular_posts=Post.paginate( :select => "posts.*, count(*) as vote_total", :joins => joins, :conditions=> conditions, :group => "votes.post_id", :order => "vote_total DESC", :page => params[:page], :per_page => 3) respond_to do |format| format.html # index.html.erb format.xml { render :xml => @posts } format.json { render :json => @posts } format.atom end end routes.rb ActionController::Routing::Routes.draw do |map| map.resources :ugtags map.resources :wysihat_files map.resources :users map.resources :votes map.resources :votes, :belongs_to => :user map.resources :tags, :belongs_to => :user map.resources :ugtags, :belongs_to => :user map.resources :posts, :collection => {:auto_complete_for_tag_tag_name => :get } map.resources :posts, :sessions map.resources :posts, :has_many => :comments map.resources :posts, :has_many => :tags map.resources :posts, :has_many => :ugtags map.resources :posts, :has_many => :votes map.resources :posts, :belongs_to => :user map.resources :tags, :collection => {:auto_complete_for_tag_tag_name => :get } map.resources :ugtags, :collection => {:auto_complete_for_ugtag_ugctag_name => :get } map.login 'login', :controller => 'sessions', :action => 'new' map.logout 'logout', :controller => 'sessions', :action => 'destroy' map.root :controller => "posts" map.connect ':controller/:action/:id' map.connect ':controller/:action/:id.:format' end UPDATE TO SHOW MODEL AND MIGRATION FOR POST class Post < ActiveRecord::Base has_attached_file :photo validates_presence_of :body, :title has_many :comments, :dependent => :destroy has_many :tags, :dependent => :destroy has_many :ugtags, :dependent => :destroy has_many :votes, :dependent => :destroy belongs_to :user after_create :self_vote def self_vote # I am assuming you have a user_id field in `posts` and `votes` table. self.votes.create(:user => self.user) end cattr_reader :per_page @@per_page = 10 end migrations for post class CreatePosts < ActiveRecord::Migration def self.up create_table :posts do |t| t.string :title t.text :body t.timestamps end end def self.down drop_table :posts end end _ class AddUserIdToPost < ActiveRecord::Migration def self.up add_column :posts, :user_id, :string end def self.down remove_column :posts, :user_id end end

    Read the article

  • Problem with videos on heroku

    - by mnml
    Hi, I have recently moved my RoR app on the Heroku platform, and almost everything works fine apart from the videos. It works fine when my app runs in local but not on heroku. This is the error log I'm getting, if anyone knows where it can be coming from: Processing VideosController#new (for IP at 2010-03-20 04:32:09) [GET] Session ID: 6abecf60c3369d7c7029e366bb801e08 Parameters: {"artist_id"=>"10", "action"=>"new", "controller"=>"admin/videos"} Rendering within layouts/admin Rendering admin/videos/new ActionView::TemplateError (undefined method `video_file_relative_path' for #<Video:0x2adc9839fe28>) on line #21 of app/views/admin/videos/ _form.rhtml: 18: 19: <p><label for="videos_image_file">Fichier Vidéo SWF</label><br/> 20: <% if @video.video_file %> 21: <%= link_to image_tag(url_for_file_column("video", "video_file", :name => "thumbnail"))+"<br>", {:controller => url_for_file_column("video", "video_file")}, :popup => ['new_window', 'height=200,width=200'] %> 22: <% end %> 23: <%= file_column_field 'video', 'video_file' %> 24: &nbsp;&nbsp;&nbsp; #{RAILS_ROOT}/vendor/rails/activerecord/lib/active_record/base.rb: 1792:in `method_missing' #{RAILS_ROOT}/vendor/plugins/file_column/lib/file_column_helper.rb: 75:in `send' #{RAILS_ROOT}/vendor/plugins/file_column/lib/file_column_helper.rb: 75:in `url_for_file_column' #{RAILS_ROOT}/app/views/admin/videos/_form.rhtml:21:in `_run_rhtml_admin_videos__form' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_view/base.rb: 314:in `send' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_view/base.rb: 314:in `compile_and_render_template' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_view/base.rb: 290:in `render_template' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_view/base.rb: 249:in `render_file' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_view/base.rb: 264:in `render' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_view/partials.rb: 59:in `render_partial' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_controller/ benchmarking.rb:33:in `benchmark' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_view/partials.rb: 58:in `render_partial' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_view/base.rb: 276:in `render' #{RAILS_ROOT}/app/views/admin/videos/new.rhtml:4:in `_run_rhtml_admin_videos_new' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_view/base.rb: 314:in `send' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_view/base.rb: 314:in `compile_and_render_template' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_view/base.rb: 290:in `render_template' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_view/base.rb: 249:in `render_file' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_controller/ base.rb:699:in `render_file' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_controller/ base.rb:621:in `render_with_no_layout' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_controller/ layout.rb:243:in `render_without_benchmark' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_controller/ benchmarking.rb:53:in `render' /usr/local/lib/ruby/1.8/benchmark.rb:293:in `measure' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_controller/ benchmarking.rb:53:in `render' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_controller/ base.rb:911:in `perform_action_without_filters' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_controller/ filters.rb:368:in `perform_action_without_benchmark' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_controller/ benchmarking.rb:69:in `perform_action_without_rescue' /usr/local/lib/ruby/1.8/benchmark.rb:293:in `measure' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_controller/ benchmarking.rb:69:in `perform_action_without_rescue' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_controller/ rescue.rb:82:in `perform_action' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_controller/ base.rb:381:in `send' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_controller/ base.rb:381:in `process_without_filters' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_controller/ filters.rb:377:in `process_without_session_management_support' #{RAILS_ROOT}/vendor/rails/actionpack/lib/action_controller/ session_management.rb:117:in `process' #{RAILS_ROOT}/vendor/rails/railties/lib/dispatcher.rb:38:in `dispatch' /usr/local/lib/ruby/gems/1.8/gems/thin-1.0.1/lib/rack/adapter/ rails.rb:60:in `serve_rails' /usr/local/lib/ruby/gems/1.8/gems/thin-1.0.1/lib/rack/adapter/ rails.rb:80:in `call' /home/heroku_rack/lib/static_assets.rb:9:in `call' /home/heroku_rack/lib/last_access.rb:25:in `call' /usr/local/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/urlmap.rb: 46:in `call' /usr/local/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/urlmap.rb: 40:in `each' /usr/local/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/urlmap.rb: 40:in `call' /home/heroku_rack/lib/date_header.rb:14:in `call' /usr/local/lib/ruby/gems/1.8/gems/rack-1.0.1/lib/rack/builder.rb: 60:in `call' /usr/local/lib/ruby/gems/1.8/gems/thin-1.0.1/lib/thin/ connection.rb:80:in `pre_process' /usr/local/lib/ruby/gems/1.8/gems/thin-1.0.1/lib/thin/ connection.rb:78:in `catch' /usr/local/lib/ruby/gems/1.8/gems/thin-1.0.1/lib/thin/ connection.rb:78:in `pre_process' /usr/local/lib/ruby/gems/1.8/gems/thin-1.0.1/lib/thin/ connection.rb:57:in `process' /usr/local/lib/ruby/gems/1.8/gems/thin-1.0.1/lib/thin/ connection.rb:42:in `receive_data' /usr/local/lib/ruby/gems/1.8/gems/eventmachine-0.12.6/lib/ eventmachine.rb:240:in `run_machine' /usr/local/lib/ruby/gems/1.8/gems/eventmachine-0.12.6/lib/ eventmachine.rb:240:in `run' /usr/local/lib/ruby/gems/1.8/gems/thin-1.0.1/lib/thin/backends/ base.rb:57:in `start' /usr/local/lib/ruby/gems/1.8/gems/thin-1.0.1/lib/thin/server.rb: 150:in `start' /usr/local/lib/ruby/gems/1.8/gems/thin-1.0.1/lib/thin/controllers/ controller.rb:80:in `start' /usr/local/lib/ruby/gems/1.8/gems/thin-1.0.1/lib/thin/runner.rb: 173:in `send' /usr/local/lib/ruby/gems/1.8/gems/thin-1.0.1/lib/thin/runner.rb: 173:in `run_command' /usr/local/lib/ruby/gems/1.8/gems/thin-1.0.1/lib/thin/runner.rb: 139:in `run!' /usr/local/lib/ruby/gems/1.8/gems/thin-1.0.1/bin/thin:6 /usr/local/bin/thin:20:in `load' /usr/local/bin/thin:20 Thanks

    Read the article

  • Microsoft Management Console stops working when I add snap-in to it

    - by JayaprakashReddy
    I have Windows 7 Ultimate OS. I'm opening mmc.exe as administrator and trying add Certificates or any other snap-in, then while loading that snap-in MMC breaks and displays following message and after that it closes automatically once I click on close button on that message. What could be the problem? I did following to fix the problem but couldn't succeed any of these: I tried to repair the OS I repaired files using this method Even repaired the installation using this link Update: *@oldskool: Here is the debug process output:* Sorry its a long output text. 'mmc.exe': Loaded 'C:\Windows\System32\mmc.exe', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ntdll.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\kernel32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\KernelBase.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\gdi32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\user32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\lpk.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\usp10.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\msvcrt.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mfc42u.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ole32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\rpcrt4.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\oleaut32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\odbc32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\advapi32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\sechost.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mmcbase.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\shlwapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\uxtheme.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\duser.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\imm32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\msctf.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\odbcint.dll', Binary was not built with debug information. 'mmc.exe': Loaded 'C:\Windows\System32\dui70.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7600.16661_none_420fe3fa2b8113bd\comctl32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\shell32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\cryptbase.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\urlmon.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wininet.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\iertutil.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\crypt32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\msasn1.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\clbcatq.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mmcndmgr.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dwmapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\oleacc.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\cryptsp.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\rsaenh.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\RpcRtRemote.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mlang.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\xmllite.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\version.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\apphelp.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\msi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Program Files\Microsoft Visual Studio 8\SDK\v2.0\Bin\mscormmc.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mscoree.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4927_none_d08a205e442db5b5\msvcr80.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\azroleui.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\atl.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\secur32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\netutils.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dsrole.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\logoncli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dsuiext.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ntdsapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ws2_32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\nsi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\activeds.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\adsldpc.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\Wldap32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mpr.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\netapi32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\srvcli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wkscli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\certmgr.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\certcli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\CertEnroll.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\cryptui.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ncrypt.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\bcrypt.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wintrust.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\imagehlp.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\sspicli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\aclui.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\IPHLPAPI.DLL', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\winnsi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\slc.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\comsnap.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mfc42.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\mycomput.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\devmgr.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\setupapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\cfgmgr32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\devobj.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\devrtl.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\newdev.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dmdskmgr.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dmutil.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dmdskres.dll', Binary was not built with debug information. 'mmc.exe': Loaded 'C:\Windows\System32\dmdskres2.dll', Binary was not built with debug information. 'mmc.exe': Loaded 'C:\Windows\System32\gpedit.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dssec.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\authz.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\dfscli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\samcli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\gpapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\framedynos.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wtsapi32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ipsmsnap.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\winipsec.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\userenv.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\profapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\ipsecsnp.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\polstore.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\localsec.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wdc.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\pdh.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\pdhui.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\comdlg32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\credui.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wevtapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\pla.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\tdh.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\winsta.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\utildll.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\browcli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\vdmdbg.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\pmcsnap.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\winspool.drv', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\puiapi.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wsecedit.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\scecli.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\filemgmt.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Program Files\Microsoft SQL Server\100\Tools\Binn\SqlManager.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.4053_none_cbf21254470d8752\mfc80u.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4927_none_d08a205e442db5b5\msvcp80.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.4053_none_d1c738ec43578ea1\ATL80.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7600.16661_none_ebfb56996c72aefc\comctl32.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\winsxs\x86_microsoft.vc80.mfcloc_1fc8b3b9a1e18e3b_8.0.50727.4053_none_03ca5532205cb096\mfc80ENU.dll', Binary was not built with debug information. 'mmc.exe': Loaded 'C:\Program Files\Microsoft SQL Server\100\Tools\Binn\Resources\1033\SqlManager.rll', Binary was not built with debug information. 'mmc.exe': Loaded 'C:\Windows\System32\msxml6.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Program Files\Microsoft SQL Server\90\Tools\Binn\SqlManager.dll', Cannot find or open the PDB file 'mmc.exe': Loaded 'C:\Windows\System32\wbem\wbemcntl.dll', Cannot find or open the PDB file The thread 'Win32 Thread' (0xf74) has exited with code 0 (0x0). Unhandled exception at 0x774d35e3 in mmc.exe: 0xC0000374: A heap has been corrupted.

    Read the article

  • How to fix "ruby installation is missing psych (for YAML output)." on CentOS?

    - by ohho
    After rvm installation on CentOS 5.8: [rails@localhost ~]$ rvm -v rvm 1.16.17 [rails@localhost ~]$ which ruby ~/.rvm/rubies/ruby-1.9.3-p286/bin/ruby [rails@localhost ~]$ ruby -v ruby 1.9.3p286 (2012-10-12 revision 37165) [i686-linux] [rails@localhost ~]$ which gem ~/.rvm/rubies/ruby-1.9.3-p286/bin/gem there is a warning: $ gem -v /home/rails/.rvm/rubies/ruby-1.9.3-p286/lib/ruby/1.9.1/yaml.rb:56:in `<top (required)>': It seems your ruby installation is missing psych (for YAML output). To eliminate this warning, please install libyaml and reinstall your ruby. 1.8.24 I followed some advice: $ rvm pkg install libyaml Fetching yaml-0.1.4.tar.gz to /home/rails/.rvm/archives Extracting yaml-0.1.4.tar.gz to /home/rails/.rvm/src Prepare yaml in /home/rails/.rvm/src/yaml-0.1.4. Configuring yaml in /home/rails/.rvm/src/yaml-0.1.4. Compiling yaml in /home/rails/.rvm/src/yaml-0.1.4. Installing yaml to /home/rails/.rvm/usr Please note that it's required to reinstall all rubies: rvm reinstall all --force and then: $ rvm reinstall all --force Removing /home/rails/.rvm/src/ruby-1.8.7-p371... Removing /home/rails/.rvm/rubies/ruby-1.8.7-p371... No binary rubies available for: centos/5.8/i386/ruby-1.8.7-p371. Continuing with compilation. Please read 'rvm mount' to get more information on binary rubies. Installing Ruby from source to: /home/rails/.rvm/rubies/ruby-1.8.7-p371, this may take a while depending on your cpu(s)... ruby-1.8.7-p371 - #downloading ruby-1.8.7-p371, this may take a while depending on your connection... ruby-1.8.7-p371 - #extracting ruby-1.8.7-p371 to /home/rails/.rvm/src/ruby-1.8.7-p371 ruby-1.8.7-p371 - #extracted to /home/rails/.rvm/src/ruby-1.8.7-p371 Applying patch /home/rails/.rvm/patches/ruby/1.8.7/stdout-rouge-fix.patch Applying patch /home/rails/.rvm/patches/ruby/1.8.7/no_sslv2.diff ruby-1.8.7-p371 - #configuring ruby-1.8.7-p371 - #compiling ruby-1.8.7-p371 - #installing Removing old Rubygems files... Installing rubygems-1.8.24 for ruby-1.8.7-p371 ... Installation of rubygems completed successfully. Saving wrappers to '/home/rails/.rvm/bin'. ruby-1.8.7-p371 - #adjusting #shebangs for (gem irb erb ri rdoc testrb rake). ruby-1.8.7-p371 - #importing default gemsets (/home/rails/.rvm/gemsets/) Install of ruby-1.8.7-p371 - #complete Please be aware that you just installed a ruby that requires 2 patches just to be compiled on up to date linux system. This may have known and unaccounted for security vulnerabilities. Please consider upgrading to Ruby 1.9.3-286 which will have all of the latest security patches. Making gemset ruby-1.8.7-p371 pristine. Making gemset ruby-1.8.7-p371@global pristine. Removing /home/rails/.rvm/src/ruby-1.9.3-p286... Removing /home/rails/.rvm/rubies/ruby-1.9.3-p286... No binary rubies available for: centos/5.8/i386/ruby-1.9.3-p286. Continuing with compilation. Please read 'rvm mount' to get more information on binary rubies. Installing Ruby from source to: /home/rails/.rvm/rubies/ruby-1.9.3-p286, this may take a while depending on your cpu(s)... ruby-1.9.3-p286 - #downloading ruby-1.9.3-p286, this may take a while depending on your connection... ruby-1.9.3-p286 - #extracting ruby-1.9.3-p286 to /home/rails/.rvm/src/ruby-1.9.3-p286 ruby-1.9.3-p286 - #extracted to /home/rails/.rvm/src/ruby-1.9.3-p286 ruby-1.9.3-p286 - #configuring ruby-1.9.3-p286 - #compiling ruby-1.9.3-p286 - #installing Removing old Rubygems files... Installing rubygems-1.8.24 for ruby-1.9.3-p286 ... Installation of rubygems completed successfully. Saving wrappers to '/home/rails/.rvm/bin'. ruby-1.9.3-p286 - #adjusting #shebangs for (gem irb erb ri rdoc testrb rake). ruby-1.9.3-p286 - #importing default gemsets (/home/rails/.rvm/gemsets/) Install of ruby-1.9.3-p286 - #complete Making gemset ruby-1.9.3-p286 pristine. Making gemset ruby-1.9.3-p286@global pristine. Too bad, the warning is still there: $ gem -v /home/rails/.rvm/rubies/ruby-1.9.3-p286/lib/ruby/1.9.1/yaml.rb:56:in `<top (required)>': It seems your ruby installation is missing psych (for YAML output). To eliminate this warning, please install libyaml and reinstall your ruby. 1.8.24 How can I get rid of the warning? UPDATE: (applying rvm reinstall 1.9.3 --movable) $ rvm reinstall 1.9.3 --movable Removing /home/rails/.rvm/src/ruby-1.9.3-p286... Removing /home/rails/.rvm/rubies/ruby-1.9.3-p286... Fetching yaml-0.1.4.tar.gz to /home/rails/.rvm/archives Extracting yaml-0.1.4.tar.gz to /home/rails/.rvm/src Prepare yaml in /home/rails/.rvm/src/yaml-0.1.4. Configuring yaml in /home/rails/.rvm/src/yaml-0.1.4. Compiling yaml in /home/rails/.rvm/src/yaml-0.1.4. Installing yaml to /home/rails/.rvm/rubies/ruby-1.9.3-p286 Installing Ruby from source to: /home/rails/.rvm/rubies/ruby-1.9.3-p286, this may take a while depending on your cpu(s)... ruby-1.9.3-p286 - #downloading ruby-1.9.3-p286, this may take a while depending on your connection... ruby-1.9.3-p286 - #extracting ruby-1.9.3-p286 to /home/rails/.rvm/src/ruby-1.9.3-p286 ruby-1.9.3-p286 - #extracted to /home/rails/.rvm/src/ruby-1.9.3-p286 Applying patch /home/rails/.rvm/patches/ruby/1.9.3/ruby-multilib.patch Error running 'patch -F 25 -p1 -N -f -i /home/rails/.rvm/patches/ruby/1.9.3/ruby-multilib.patch', please read /home/rails/.rvm/log/ruby-1.9.3-p286/patch.apply.ruby-multilib.log There has been an error applying the specified patches. Halting the installation. Making gemset ruby-1.9.3-p286 pristine. Making gemset ruby-1.9.3-p286@global pristine.

    Read the article

  • How do I change OSX package install directory?

    - by Scott
    It drives me nuts that every time I download a binary to run on OSX that it wants to install in system directories. ~/Applications is a perfectly fine place to install and doesn't require blindly authenticating somebody else's binary. Is there a way to change the install directory for packages? On a few I've been able to open the package and edit the plist to install it elsewhere, but that doesn't work universally. I install from source when I can, but it isn't always an option. Is there a good way to force the installer to use ~/Applications?

    Read the article

  • Jumbled byte array after using TcpClient and TcpListener

    - by Dylan
    I want to use the TcpClient and TcpListener to send an mp3 file over a network. I implemented a solution of this using sockets, but there were some issues so I am investigating a new/better way to send a file. I create a byte array which looks like this: length_of_filename|filename|file This should then be transmitted using the above mentioned classes, yet on the server side the byte array I read is completely messed up and I'm not sure why. The method I use to send: public static void Send(String filePath) { try { IPEndPoint endPoint = new IPEndPoint(Settings.IpAddress, Settings.Port + 1); Byte[] fileData = File.ReadAllBytes(filePath); FileInfo fi = new FileInfo(filePath); List<byte> dataToSend = new List<byte>(); dataToSend.AddRange(BitConverter.GetBytes(Encoding.Unicode.GetByteCount(fi.Name))); // length of filename dataToSend.AddRange(Encoding.Unicode.GetBytes(fi.Name)); // filename dataToSend.AddRange(fileData); // file binary data using (TcpClient client = new TcpClient()) { client.Connect(Settings.IpAddress, Settings.Port + 1); // Get a client stream for reading and writing. using (NetworkStream stream = client.GetStream()) { // server is ready stream.Write(dataToSend.ToArray(), 0, dataToSend.ToArray().Length); } } } catch (ArgumentNullException e) { Debug.WriteLine(e); } catch (SocketException e) { Debug.WriteLine(e); } } } Then on the server side it looks as follows: private void Listen() { TcpListener server = null; try { // Setup the TcpListener Int32 port = Settings.Port + 1; IPAddress localAddr = IPAddress.Parse("127.0.0.1"); // TcpListener server = new TcpListener(port); server = new TcpListener(localAddr, port); // Start listening for client requests. server.Start(); // Buffer for reading data Byte[] bytes = new Byte[1024]; List<byte> data; // Enter the listening loop. while (true) { Debug.WriteLine("Waiting for a connection... "); string filePath = string.Empty; // Perform a blocking call to accept requests. // You could also user server.AcceptSocket() here. using (TcpClient client = server.AcceptTcpClient()) { Debug.WriteLine("Connected to client!"); data = new List<byte>(); // Get a stream object for reading and writing using (NetworkStream stream = client.GetStream()) { // Loop to receive all the data sent by the client. while ((stream.Read(bytes, 0, bytes.Length)) != 0) { data.AddRange(bytes); } } } int fileNameLength = BitConverter.ToInt32(data.ToArray(), 0); filePath = Encoding.Unicode.GetString(data.ToArray(), 4, fileNameLength); var binary = data.GetRange(4 + fileNameLength, data.Count - 4 - fileNameLength); Debug.WriteLine("File successfully downloaded!"); // write it to disk using (BinaryWriter writer = new BinaryWriter(File.Open(filePath, FileMode.Append))) { writer.Write(binary.ToArray(), 0, binary.Count); } } } catch (Exception ex) { Debug.WriteLine(ex); } finally { // Stop listening for new clients. server.Stop(); } } Can anyone see something that I am missing/doing wrong?

    Read the article

  • Java process failure (hadoop, hbase)

    - by Vladimir
    Anytime I am running hadoop/hbase process from a command prompt I get an error: /usr/local/hadoop/bin/hadoop: line 320: /usr/lib/jvm/jdk1.7.0/bin/java: cannot execute binary file /usr/local/hadoop/bin/hadoop: line 390: /usr/lib/jvm/jdk1.7.0/bin/java: cannot execute binary file /usr/local/hadoop/bin/hadoop: line 390: /usr/lib/jvm/jdk1.7.0/bin/java: Success I get the same kind of error when I start hbase. java version "1.7.0_07" Java(TM) SE Runtime Environment (build 1.7.0_07-b10) Java HotSpot(TM) Server VM (build 23.3-b01, mixed mode) Could you please tell me what could cause the issue? Thank you

    Read the article

  • Jailkit - allowing use of Java/Python

    - by James hooker
    I'm looking to allow Jailed users to use JAVA (JRE) to execute their own Java files, similarly with Python to execute py scripts. I've tried adding the JAVA binary (/usr/bin/java) to a jail using the following jk_cp /path/to/jail /usr/bin/java This seems to copy some of the libraries across, aswell as the Java binary itself, however the jailed user is still unable to execute Java. It complains first of all of a missing lib called libsli.so. I copied that across and it then complains about libjava.so which I proceeded to copy across to, to no avail. Does anyone have experience with enabling the execution of Java within a jailed environment? This is under Ubuntu 10.04 64-bit, with Jailkit 2.11.

    Read the article

  • How do I create a customized keyboard layout for Windows?

    - by Pedro Palhoto
    On Linux you can create any layout you wish by editing the appropriate ASCII configuration files. On Windows the keyboard layout definitions are binary. Is there any tool that can create these binary keyboard layout configuration files? I grew up on the Macintosh international keyboard layout, which used the option key extensively, and now I would like to use the same layout on Windows. On Linux this Mac international keyboard layout exists for both the console as well as for X.Org. On Windows, the most similar layout is US International, which is not the same.

    Read the article

  • Apache not running from rc.d on FreeBSD

    - by Oksana Molotova
    I'm using FreeBSD 8.3 and Apache 2.2. I didn't install Apache from ports, instead compiled it from source because I wanted to move the binary and configuration to a different path (I'm centering all of the major production daemons and their configurations in a single place). In any case, I based the /usr/local/etc/rc.d/apache22 file on one from a different server where it was installed from ports, I only modified the binary and config paths within. I can manually execute it with /usr/local/etc/rc.d/apache22 start, however even with apache22_enable="YES" in /etc/rc.conf it fails to start. All permissions and ownership are identical to the other server where it works. What am I missing and is there a way to debug this kind of thing?

    Read the article

  • wmi not available for some time after reboot

    - by Alex Okrushko
    I'm having the problem with the WMI availability on logon. Right after reboot I open cmd and with python interpreter: >>> import wmi >>> c = wmi.WMI() >>> c.Win32_OperatingSystem() Traceback (most recent call last): File "<stdin>", line 1, in <module> File "C:\Python27\lib\site-packages\wmi.py", line 1147, in __getattr__ return getattr (self._namespace, attribute) File "C:\Python27\lib\site-packages\win32com\client\dynamic.py", line 516, in __getattr__ raise AttributeError("%s.%s" % (self._username_, attr)) AttributeError: winmgmts:.Win32_OperatingSystem >>> 5 minutes later I open another cmd and python interpreter: Python 2.7.3 (default, Apr 10 2012, 23:31:26) [MSC v.1500 32 bit (Intel)] on win 32 Type "help", "copyright", "credits" or "license" for more information. >>> import wmi >>> c = wmi.WMI() >>> c.Win32_OperatingSystem() [<_wmi_object: \\W520-ALEX-WIN7\root\cimv2:Win32_OperatingSystem=@>] >>> NOTE: the first cmd still keeps saying AttributeError even 5 minutes later. NOTE 2: if I logout and login wmi is available, so it is somehow effected by reboot with process explorer I check the environmental variables and they are the same for both cmds What could that be? Please help. UPDATE: Apparently the problem is connecting to the wbem services: >>> import win32com.client >>> win32com.client.Dispatch('WbemScripting.SWbemLocator') <COMObject WbemScripting.SWbemLocator> >>> wmi_service= win32com.client.Dispatch('WbemScripting.SWbemLocator') >>> wbem_service = wmi_service.ConnectServer('.','root/cimv2') >>> wbem_service <COMObject <unknown>> >>> items = wbem_service.ExecQuery('Select * from Win32_OperatingSystem') Traceback (most recent call last): File "<stdin>", line 1, in <module> File "<COMObject <unknown>>", line 3, in ExecQuery File "C:\Python27\lib\site-packages\win32com\client\dynamic.py", line 282, in _ApplyTypes_ result = self._oleobj_.InvokeTypes(*(dispid, LCID, wFlags, retType, argTypes ) + args) pywintypes.com_error: (-2147352567, 'Exception occurred.', (0, u'SWbemServicesEx ', u'Generic failure ', None, 0, -2147217407), None) >>> NOTE 3: wmic os always worked. NOTE 4: re-installing pywin32 package didn't help. Neither did Re-registering/re-compiling the WMI components and resetting of the WMI database (as recommended here) NOTE 5: my 4 Other laptops don't have this problem. Also wmiprov.log has: (Mon Oct 29 11:40:07 2012.248587) : *************************************** (Mon Oct 29 11:40:07 2012.248587) : Could not get pointer to binary resource for file: (Mon Oct 29 11:40:07 2012.248587) : C:\Windows\system32\drivers\ndis.sys[MofResourceName](Mon Oct 29 11:40:07 2012.248587) : (Mon Oct 29 11:40:07 2012.248587) : *************************************** (Mon Oct 29 11:40:07 2012.248587) : *************************************** (Mon Oct 29 11:40:07 2012.248587) : Could not get pointer to binary resource for file: (Mon Oct 29 11:40:07 2012.248587) : C:\Windows\system32\drivers\en-US\ndis.sys.mui[MofResourceName](Mon Oct 29 11:40:07 2012.248587) : (Mon Oct 29 11:40:07 2012.248587) : *************************************** (Mon Oct 29 11:40:07 2012.248603) : *************************************** (Mon Oct 29 11:40:07 2012.248603) : Could not get pointer to binary resource for file: (Mon Oct 29 11:40:07 2012.248603) : C:\Windows\system32\DRIVERS\wmiacpi.sys[MofResource](Mon Oct 29 11:40:07 2012.248603) : (Mon Oct 29 11:40:07 2012.248603) : *************************************** (Mon Oct 29 11:40:07 2012.248603) : *************************************** (Mon Oct 29 11:40:07 2012.248603) : Could not get pointer to binary resource for file: (Mon Oct 29 11:40:07 2012.248603) : C:\Windows\system32\DRIVERS\monitor.sys[MonitorWMI](Mon Oct 29 11:40:07 2012.248603) : (Mon Oct 29 11:40:07 2012.248603) : *************************************** NOTE 6: the WMIDiag tool report is at my dropbox

    Read the article

  • PHP make install seems to end abruptly and does not update libphp5.so

    - by matt74tm
    I'm trying to compile PHP 5.3.3 and after a lot of ups and downs, I finally did 'make' it followed by 'make install' which just shows this: root@server [/tmp/php-5.3.3]# make install Installing PHP SAPI module: cgi Installing PHP CGI binary: /usr/bin/ Installing PHP CLI binary: /usr/bin/ Installing PHP CLI man page: /usr/share/man/man1/ Installing shared extensions: /usr/lib64/20090626/ Installing build environment: /usr/lib64/build/ Installing header files: /usr/include/php/ Installing helper programs: /usr/bin/ program: phpize program: php-config Installing man pages: /usr/share/man/man1/ page: phpize.1 page: php-config.1 /tmp/php-5.3.3/build/shtool install -c ext/phar/phar.phar /usr/bin ln -s -f /usr/bin/phar.phar /usr/bin/phar Installing PDO headers: /usr/include/php/ext/pdo/ It does not look like its done, because /usr/lib64/httpd/modules/libphp5.so still shows an old date: -rwxr-xr-x 1 root root 3193768 Mar 31 2010 libphp5.so

    Read the article

  • php file downloads instead of being processed with ajax on apache

    - by eagleon
    I have a small website where some content is displayed within a HTML tag using AJAX. The content is simply taken from another page on the same web site. However, sometimes instead of loading the parsed PHP file, the browser displays a download box instead. I downloaded the file and this is what it looks like a text file mixed with binary or gzipped data. I can't paste the binary stuff here, but here are some of the headers: Jul 2012 18:52:16 GMT Server: Apache/2 X-Powered-By: PHP/5.3.10 Content-Encoding: gzip Vary: Accept-Encoding,User-Agent Keep-Alive: timeout=1, max=95 Connection: Keep-Alive Transfer-Encoding: chunked Content-Type: text/html HTTP/1.1 304 Not Modified Date: Sun, 01 Jul 2012 18:52:16 GMT Server: Apache/2 Connection: Keep-Alive Keep-Alive: timeout=1, max=93 ETag: "2fc857-409-4c39691c59b40" HTTP/1.1 304 Not Modified Date: Sun, 01 Jul 2012 18:52:16 GMT Server: Apache/2 Connection: Keep-Alive Keep-Alive: timeout=1, max=92 ETag: "2fc854-3e5-4c39691b65900" HTTP/1.1 304 Not Modified Date: Sun, 01 Jul 2012 18:52:16 GMT Server: Apache/2 Connection: Keep-Alive Keep-Alive: timeout=1, max=91 ETag: "2fc847-3e3-4c3969197d480" and large blocks of stuff like this: µàl]&BaËÜk#ìÏ

    Read the article

  • Perl script segfaulting after 64-bit upgrade

    - by Brent
    I recently upgraded a 32-bit Debian server to 64-bit by re-installing, and copying my data into place. After this I have a perl script that repeats the following, and is segfaulting on the tell line: seek(FIN,$ps,0); tell(FIN, $ps); $line=<FIN>; I don't speak perl, so I'm not sure exactly what is going on here. I can get the script to run (apparently successfully) by commenting every occurrence of tell, but this is obviously not the best solution. I suspect that tell is calling a 32-bit binary or something, and that is the cause of the segfault - but I don't know. Can someone explain what tell does, and if it is indeed a separate binary, what package it belongs to (or how it is installed ie. cpan)? Or perhaps I am on the wrong track?

    Read the article

  • Guaranteeing ACID properties for InnoDB databases.

    - by plinehan
    What steps must one take to ensure that an otherwise defaultly-configured InnoDB server is truly ACID compliant? The InnoDB configuration page mentions that the hardware itself must be configured to honor fsync calls, i.e. disable any write-back caches. This page mentions some other concerns, but may be conflating the binary log and the InnoDB log, and may be a bit out of date regarding default settings for MySQL 5.x. Upon reading the binary log document page it would seem that the "sync_binlog=1" setting is not required for ACID properties in general, only for ACID properties vis a vis point-in-time recovery and replication. So, is disabling write-back disk caching sufficient, or are there other settings that must be tweaked?

    Read the article

  • Command does not execute in crontab while command itself works just fine

    - by fuzzybee
    I have this script from Colin Johnson on Github - https://github.com/colinbjohnson/aws-missing-tools/tree/master/ec2-automate-backup It seems great. I have modified it to send email to myself every time an EBS snapshot is created or deleted. The following works like a charm ec2-automate-backup.sh -v "vol-myvolumeid" -k 3 However, it does not execute at all as part of my crontab (I didn't receive any emails) #some command that got commented out */5 * * * * ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3; * * * * * date /root/logs/crontab.log; */5 * * * * date /root/logs/crontab2.log Please note that the 2nd and 3rd execute just fines as I can see the date and time in log files. What could I have missed here? The full ec2-automate-backup.sh is as follows: #!/bin/bash - # Author: Colin Johnson / [email protected] # Date: 2012-09-24 # Version 0.1 # License Type: GNU GENERAL PUBLIC LICENSE, Version 3 # #confirms that executables required for succesful script execution are available prerequisite_check() { for prerequisite in basename ec2-create-snapshot ec2-create-tags ec2-describe-snapshots ec2-delete-snapshot date do #use of "hash" chosen as it is a shell builtin and will add programs to hash table, possibly speeding execution. Use of type also considered - open to suggestions. hash $prerequisite &> /dev/null if [[ $? == 1 ]] #has exits with exit status of 70, executable was not found then echo "In order to use `basename $0`, the executable \"$prerequisite\" must be installed." 1>&2 | mailx -s "Error happened 0" [email protected] ; exit 70 fi done } #get_EBS_List gets a list of available EBS instances depending upon the selection_method of EBS selection that is provided by user input get_EBS_List() { case $selection_method in volumeid) if [[ -z $volumeid ]] then echo "The selection method \"volumeid\" (which is $app_name's default selection_method of operation or requested by using the -s volumeid parameter) requires a volumeid (-v volumeid) for operation. Correct usage is as follows: \"-v vol-6d6a0527\",\"-s volumeid -v vol-6d6a0527\" or \"-v \"vol-6d6a0527 vol-636a0112\"\" if multiple volumes are to be selected." 1>&2 | mailx -s "Error happened 1" [email protected] ; exit 64 fi ebs_selection_string="$volumeid" ;; tag) if [[ -z $tag ]] then echo "The selected selection_method \"tag\" (-s tag) requires a valid tag (-t key=value) for operation. Correct usage is as follows: \"-s tag -t backup=true\" or \"-s tag -t Name=my_tag.\"" 1>&2 | mailx -s "Error happened 2" [email protected] ; exit 64 fi ebs_selection_string="--filter tag:$tag" ;; *) echo "If you specify a selection_method (-s selection_method) for selecting EBS volumes you must select either \"volumeid\" (-s volumeid) or \"tag\" (-s tag)." 1>&2 | mailx -s "Error happened 3" [email protected] ; exit 64 ;; esac #creates a list of all ebs volumes that match the selection string from above ebs_backup_list_complete=`ec2-describe-volumes --show-empty-fields --region $region $ebs_selection_string 2>&1` #takes the output of the previous command ebs_backup_list_result=`echo $?` if [[ $ebs_backup_list_result -gt 0 ]] then echo -e "An error occured when running ec2-describe-volumes. The error returned is below:\n$ebs_backup_list_complete" 1>&2 | mailx -s "Error happened 4" [email protected] ; exit 70 fi ebs_backup_list=`echo "$ebs_backup_list_complete" | grep ^VOLUME | cut -f 2` #code to right will output list of EBS volumes to be backed up: echo -e "Now outputting ebs_backup_list:\n$ebs_backup_list" } create_EBS_Snapshot_Tags() { #snapshot tags holds all tags that need to be applied to a given snapshot - by aggregating tags we ensure that ec2-create-tags is called only onece snapshot_tags="" #if $name_tag_create is true then append ec2ab_${ebs_selected}_$date_current to the variable $snapshot_tags if $name_tag_create then ec2_snapshot_resource_id=`echo "$ec2_create_snapshot_result" | cut -f 2` snapshot_tags="$snapshot_tags --tag Name=ec2ab_${ebs_selected}_$date_current" fi #if $purge_after_days is true, then append $purge_after_date to the variable $snapshot_tags if [[ -n $purge_after_days ]] then snapshot_tags="$snapshot_tags --tag PurgeAfter=$purge_after_date --tag PurgeAllow=true" fi #if $snapshot_tags is not zero length then set the tag on the snapshot using ec2-create-tags if [[ -n $snapshot_tags ]] then echo "Tagging Snapshot $ec2_snapshot_resource_id with the following Tags:" ec2-create-tags $ec2_snapshot_resource_id --region $region $snapshot_tags #echo "Snapshot tags successfully created" | mailx -s "Snapshot tags successfully created" [email protected] fi } date_command_get() { #finds full path to date binary date_binary_full_path=`which date` #command below is used to determine if date binary is gnu, macosx or other date_binary_file_result=`file -b $date_binary_full_path` case $date_binary_file_result in "Mach-O 64-bit executable x86_64") date_binary="macosx" ;; "ELF 64-bit LSB executable, x86-64, version 1 (SYSV)"*) date_binary="gnu" ;; *) date_binary="unknown" ;; esac #based on the installed date binary the case statement below will determine the method to use to determine "purge_after_days" in the future case $date_binary in gnu) date_command="date -d +${purge_after_days}days -u +%Y-%m-%d" ;; macosx) date_command="date -v+${purge_after_days}d -u +%Y-%m-%d" ;; unknown) date_command="date -d +${purge_after_days}days -u +%Y-%m-%d" ;; *) date_command="date -d +${purge_after_days}days -u +%Y-%m-%d" ;; esac } purge_EBS_Snapshots() { #snapshot_tag_list is a string that contains all snapshots with either the key PurgeAllow or PurgeAfter set snapshot_tag_list=`ec2-describe-tags --show-empty-fields --region $region --filter resource-type=snapshot --filter key=PurgeAllow,PurgeAfter` #snapshot_purge_allowed is a list of all snapshot_ids with PurgeAllow=true snapshot_purge_allowed=`echo "$snapshot_tag_list" | grep .*PurgeAllow'\t'true | cut -f 3` for snapshot_id_evaluated in $snapshot_purge_allowed do #gets the "PurgeAfter" date which is in UTC with YYYY-MM-DD format (or %Y-%m-%d) purge_after_date=`echo "$snapshot_tag_list" | grep .*$snapshot_id_evaluated'\t'PurgeAfter.* | cut -f 5` #if purge_after_date is not set then we have a problem. Need to alter user. if [[ -z $purge_after_date ]] #Alerts user to the fact that a Snapshot was found with PurgeAllow=true but with no PurgeAfter date. then echo "A Snapshot with the Snapshot ID $snapshot_id_evaluated has the tag \"PurgeAllow=true\" but does not have a \"PurgeAfter=YYYY-MM-DD\" date. $app_name is unable to determine if $snapshot_id_evaluated should be purged." 1>&2 | mailx -s "Error happened 5" [email protected] else #convert both the date_current and purge_after_date into epoch time to allow for comparison date_current_epoch=`date -j -f "%Y-%m-%d" "$date_current" "+%s"` purge_after_date_epoch=`date -j -f "%Y-%m-%d" "$purge_after_date" "+%s"` #perform compparison - if $purge_after_date_epoch is a lower number than $date_current_epoch than the PurgeAfter date is earlier than the current date - and the snapshot can be safely removed if [[ $purge_after_date_epoch < $date_current_epoch ]] then echo "The snapshot \"$snapshot_id_evaluated\" with the Purge After date of $purge_after_date will be deleted." ec2-delete-snapshot --region $region $snapshot_id_evaluated echo "Old snapshots successfully deleted for $volumeid" | mailx -s "Old snapshots successfully deleted for $volumeid" [email protected] fi fi done } #calls prerequisitecheck function to ensure that all executables required for script execution are available prerequisite_check app_name=`basename $0` #sets defaults selection_method="volumeid" region="ap-southeast-1" #date_binary allows a user to set the "date" binary that is installed on their system and, therefore, the options that will be given to the date binary to perform date calculations date_binary="" #sets the "Name" tag set for a snapshot to false - using "Name" requires that ec2-create-tags be called in addition to ec2-create-snapshot name_tag_create=false #sets the Purge Snapshot feature to false - this feature will eventually allow the removal of snapshots that have a "PurgeAfter" tag that is earlier than current date purge_snapshots=false #handles options processing while getopts :s:r:v:t:k:pn opt do case $opt in s) selection_method="$OPTARG";; r) region="$OPTARG";; v) volumeid="$OPTARG";; t) tag="$OPTARG";; k) purge_after_days="$OPTARG";; n) name_tag_create=true;; p) purge_snapshots=true;; *) echo "Error with Options Input. Cause of failure is most likely that an unsupported parameter was passed or a parameter was passed without a corresponding option." 1>&2 ; exit 64;; esac done #sets date variable date_current=`date -u +%Y-%m-%d` #sets the PurgeAfter tag to the number of days that a snapshot should be retained if [[ -n $purge_after_days ]] then #if the date_binary is not set, call the date_command_get function if [[ -z $date_binary ]] then date_command_get fi purge_after_date=`$date_command` echo "Snapshots taken by $app_name will be eligible for purging after the following date: $purge_after_date." fi #get_EBS_List gets a list of EBS instances for which a snapshot is desired. The list of EBS instances depends upon the selection_method that is provided by user input get_EBS_List #the loop below is called once for each volume in $ebs_backup_list - the currently selected EBS volume is passed in as "ebs_selected" for ebs_selected in $ebs_backup_list do ec2_snapshot_description="ec2ab_${ebs_selected}_$date_current" ec2_create_snapshot_result=`ec2-create-snapshot --region $region -d $ec2_snapshot_description $ebs_selected 2>&1` if [[ $? != 0 ]] then echo -e "An error occured when running ec2-create-snapshot. The error returned is below:\n$ec2_create_snapshot_result" 1>&2 ; exit 70 else ec2_snapshot_resource_id=`echo "$ec2_create_snapshot_result" | cut -f 2` echo "Snapshots successfully created for volume $volumeid" | mailx -s "Snapshots successfully created for $volumeid" [email protected] fi create_EBS_Snapshot_Tags done #if purge_snapshots is true, then run purge_EBS_Snapshots function if $purge_snapshots then echo "Snapshot Purging is Starting Now." purge_EBS_Snapshots fi cron log Oct 23 10:24:01 ip-10-130-153-227 CROND[28214]: (root) CMD (root (ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3;)) Oct 23 10:24:01 ip-10-130-153-227 CROND[28215]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:25:01 ip-10-130-153-227 CROND[28228]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:25:01 ip-10-130-153-227 CROND[28229]: (root) CMD (date >> /root/logs/crontab2.log) Oct 23 10:26:01 ip-10-130-153-227 CROND[28239]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:27:01 ip-10-130-153-227 CROND[28247]: (root) CMD (root (ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3;)) Oct 23 10:27:01 ip-10-130-153-227 CROND[28248]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:28:01 ip-10-130-153-227 CROND[28263]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:29:01 ip-10-130-153-227 CROND[28275]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:30:01 ip-10-130-153-227 CROND[28292]: (root) CMD (root (ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3;)) Oct 23 10:30:01 ip-10-130-153-227 CROND[28293]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:30:01 ip-10-130-153-227 CROND[28294]: (root) CMD (date >> /root/logs/crontab2.log) Oct 23 10:31:01 ip-10-130-153-227 CROND[28312]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:32:01 ip-10-130-153-227 CROND[28319]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:33:01 ip-10-130-153-227 CROND[28325]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:33:01 ip-10-130-153-227 CROND[28324]: (root) CMD (root (ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3;)) Oct 23 10:34:01 ip-10-130-153-227 CROND[28345]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:35:01 ip-10-130-153-227 CROND[28362]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:35:01 ip-10-130-153-227 CROND[28363]: (root) CMD (date >> /root/logs/crontab2.log) Mails to root From [email protected] Tue Oct 23 06:00:01 2012 Return-Path: <[email protected]> Date: Tue, 23 Oct 2012 06:00:01 GMT From: [email protected] (Cron Daemon) To: [email protected] Subject: Cron <root@ip-10-130-153-227> root ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3 Content-Type: text/plain; charset=UTF-8 Auto-Submitted: auto-generated X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/root> X-Cron-Env: <PATH=/usr/bin:/bin> X-Cron-Env: <LOGNAME=root> X-Cron-Env: <USER=root> Status: R /bin/sh: root: command not found

    Read the article

  • Is there a way to communicate DBMS with raw memory block or binaries

    - by darkcminor
    I am trying to communicate a numerical matrix operations library like LAPACK with any DBMS. Is it possible to send/receive complete matrices as binary or as a direct memory pointers to process them (it will be something like: The Outside library processes data stored in DBMS, then it computes some huge matrix stuff and then via memory block or a binary DBMS get the result from library)? The main purpose is speed and avoid passing through a flat file, and last but not least, use library toefficiently do some operations DBMS are not designed to. * Is it possible that Oracle, SQL Server, MySQL support this technique?.

    Read the article

  • CentOS: update a package from a repository safely on a production server

    - by dan
    Hello everybody. I have a CentOS server on a production environment. I need to update the PHP package that I installed using the REMI repository. Quite easy: yum update php But what is it going to happen if something goes wrong during the update? How can I rollback? What's the best technique to make sure not to compromise a production server due to an update? Is it maybe better to compile PHP from the source, rather than using a binary package? EDIT: I am not afraid of incompatibility between my code and the new PHP version (I have well tested that on development). I am more afraid of something going wrong while CentOS updated the binary (power cut, lost connection, unexpected conflit) Thanks, Dan

    Read the article

  • Daemons die with bus error when their binaries live on NFS

    - by mbac32768
    We have some daemons executing on a number of hosts. The daemon executable images are these very large binaries that are hosted on NFS. When the binaries are updated on the NFS server, the previously running daemons sometimes drop dead with a Bus error. I'm assuming what's happening is the NFS server is replacing the binaries in a way that's invisible to the VFS layer on the NFS clients so they end up loading pages from the updated binary, which of course leads to madness. We tried moving the new binaries into place instead of cp, but that doesn't seem to fix it. I'm considering simply mlock()'ing the binary in the daemon startup script, but surely there's magic NFS options or semantics that we should be abusing. Is there a better way to fix this?

    Read the article

  • Drag lock crisis with Windows 7 and Apple Magic Trackpad

    - by rockinthesixstring
    This is driving me insane and I've scowered the web for two days trying to fix this. I just picked up an Apple Magic Trackpad to be used exclusively on a Windows 7 PC (not apple with bootcamp). I found a nice driver that got it working right away, but when I'm moving the cursor around the screen, often it will begin "highlighting" text, or picking up and dragging things I don't want it to. I looked in the "regedit" where people are saying there is binary that can be changed, however the driver I installed doesn't use the binary being suggested. Can anyone suggest a better driver for my situation or a way to disable the drag lock that is driving me so nuts? I don't mind not being able to lift my finger when dragging, it's a far better compromise than having the insane feature.

    Read the article

  • Trackpad Drag lock pissing me off with Windows 7

    - by rockinthesixstring
    This is driving me insane and I've scowered the web for two days trying to fix this. I just picked up an Apple Magic Trackpad to be used exclusively on a Windows 7 PC (not apple with bootcamp). I found a nice driver that got it working right away, but when I'm moving the cursor around the screen, often it will begin "highlighting" text, or picking up and dragging things I don't want it to. I looked in the "regedit" where people are saying there is binary that can be changed, however the driver I installed doesn't use the binary being suggested. Can anyone suggest a better driver for my situation or a way to disable the drag lock that is driving me so nuts? I don't mind not being able to lift my finger when dragging, it's a far better compromise than having the insane feature.

    Read the article

  • Mysql innoDB corruption after server crash

    - by Ward Loockx
    Yesterday my server died because an outage in the data center. Today it's back up, but having some problems with mysql. First of all my mysql server was not able to start. For this reason I deleted the files ib_logfile0 and ib_logfile1 in /var/lib/mysql folder (I still have the old failing files). After this my server was able to startup again. But now I see a lot of issues in the mysql log file. Sep 1 09:43:55 * mysqld: 120901 9:43:55 InnoDB: Error: page 70944 log sequence number 8 1483471899 Sep 1 09:43:55 * mysqld: InnoDB: is in the future! Current system log sequence number 5 612394935. Sep 1 09:43:55 * mysqld: InnoDB: Your database may be corrupt or you may have copied the InnoDB Sep 1 09:43:55 * mysqld: InnoDB: tablespace but not the InnoDB log files. See Sep 1 09:43:55 * mysqld: InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html When I check the docs on mysql.com, I found that I need to recover my database with backups. I have a backup but not sure what's the good way on importing it. Or is there a way to recover without having to re-import the database again? So if I'm correct I need to put innodb_force_recovery to 4 in mysql and delete all current data and re-import? Is there a way to do this without having downtime? I also have one slave running. This slave has the current status now: Last_Error: Relay log read failure: Could not parse relay log event entry. The possible reasons are: the master's binary log is corrupted (you can check this by running 'mysqlbinlog' on the binary log), the slave's relay log is corrupted (you can check this by running 'mysqlbinlog' on the relay log), a network problem, or a bug in the master's or slave's MySQL code. If you want to check the master's binary log or slave's relay log, you will be able to know their names by issuing 'SHOW SLAVE STATUS' on this slave. How can I totally reset the slave after the new import on the master has happend? Hopefully we can find a solution without not to much downtime. Thanks!

    Read the article

  • How to properly backup mediawiki database (mysql) without messing up the data?

    - by Toto
    I want to backup a mediawiki database stored in a MySQL server 5.1.36 using mysqldump. Most of the wiki articles are written in spanish and a don't want to mess up with it by creating the dump with the wrong character set. mysql> status -------------- ... Current database: wikidb Current user: root@localhost ... Server version: 5.1.36-community-log MySQL Community Server (GPL) .... Server characterset: latin1 Db characterset: utf8 Client characterset: latin1 Conn. characterset: latin1 ... Using the following command: mysql> show create table text; I see that the table create statement set the charset to binary: CREATE TABLE `text` ( `old_id` int(10) unsigned NOT NULL AUTO_INCREMENT, `old_text` mediumblob NOT NULL, `old_flags` tinyblob NOT NULL, PRIMARY KEY (`old_id`) ) ENGINE=InnoDB AUTO_INCREMENT=317 DEFAULT CHARSET=binary MAX_ROWS=10000000 AVG_ROW_LENGTH=10240 How should I use mysqldump to properly generate a backup for that database?

    Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >