Search Results

Search found 22532 results on 902 pages for 'computer hardware'.

Page 60/902 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

  • To same computer Remote desktop thrue WRT54G router

    - by Kangarooo
    Cant access from my Same comp same comp to test if all is ok. Tryd all mentioned posibilities. Tryd my ip xxx.xxx.xxx.xxx / localhost with / without :5900 added with / without in "Remote desktop" checked "Configure network automatically to accept connection" with / without in router WRT54G enabled port 5900 forwardet to my comp 192.168.1.3 UPNP is enabled. I can connect to one other comp witch isnt using router and checked "Configure network automatically to accept connection" and to one thrue TENDA W311R+ router where ive put port forwarding to 5900 and there works xxx.xxx.xxx.xxx:5900 Whats wrong? What ive missed?

    Read the article

  • Citrix XenDesktop create an image to work across multiple hardware devices

    - by JohnyV
    I have created an image using this guide http://support.citrix.com/article/CTX119877. However this only works for virtual and the model that I made the image on how can i extend compatibility to another device? I am just using it for a vdisk that I can then also use as a virtual device but I wasnt the vdisk to be available over multiple devices. Using Win 7 on the client. Thanks

    Read the article

  • Computer becomes unreachable on lan after some time

    - by Ashfame
    I work on my laptop and ssh into my desktop. I use a lot of key based authentication for many servers for work but recently I couldn't login because ssh would pick up and try all the keys and it stops trying before ultimately falling back to password based login. So right now I am using this command: ssh -X -o PubkeyAuthentication=no [email protected] #deskto The issue is after sometime the desktop would just become unreachable from laptop. I won't be able to open its localhost through IP and today I tried ping'in it and found a weird thing. Instead of 192.168.1.4, it tries to ping 192.168.1.3 which I am sure is the root cause as it just can't reach 192.168.1.4 when its actually trying for 192.168.1.3 Ping command output: ashfame@ashfame-xps:~$ ping 192.168.1.4 PING 192.168.1.4 (192.168.1.4) 56(84) bytes of data. From 192.168.1.3 icmp_seq=1 Destination Host Unreachable From 192.168.1.3 icmp_seq=2 Destination Host Unreachable From 192.168.1.3 icmp_seq=3 Destination Host Unreachable From 192.168.1.3 icmp_seq=4 Destination Host Unreachable From 192.168.1.3 icmp_seq=5 Destination Host Unreachable From 192.168.1.3 icmp_seq=6 Destination Host Unreachable From 192.168.1.3 icmp_seq=7 Destination Host Unreachable From 192.168.1.3 icmp_seq=8 Destination Host Unreachable From 192.168.1.3 icmp_seq=9 Destination Host Unreachable ^C --- 192.168.1.4 ping statistics --- 10 packets transmitted, 0 received, +9 errors, 100% packet loss, time 9047ms pipe 3 Also the ping command message comes in multiple and not one by one. (izx answer's the weirdness I thought there was in ping command.) I did check for desktop, its local IP is still the same, so something is going on in my laptop. Any ideas? P.S. - Laptop runs Ubuntu 12.04 & Desktop runs Ubuntu 11.10 Laptop is connected through wifi to router and Desktop is connected through LAN to router. Update: Even after setting up static IP leases in router settings, I again ran into this issue.

    Read the article

  • Computer freezing while watching Flash videos from net

    - by t3st
    I have a Windows 7 home basic, while watching videos from net (within 5 minutes) computer starts to freeze and shows 100 percent CPU usage. I first thought it's a browser issue but watching videos from different browsers also has the same issue. My system runs the latest Firefox browser and all my plugins (including Flash) is up-to-date. After this when I shutdown/restart the computer it will go to the login window with out any problem. From there when I tried to log in to any account, the system starts to freeze and again I have to start and run Windows in safe mode (which doesn't show any problem). I read it in an article to do these steps CMD->sfc/scannow chkdsk after that only my system works normally, even now I can't watch any videos on the net otherwise it starts freezing( I can watch downloaded videos in computer without a problem) and have to do the whole process once more (which takes a lot of time). while running sfc/scannow its showed results that some of the files are corrupted and it could not be repaired. Can this be the cause for freezing of my computer while running Flash videos? or is it a hardware related problem? What different steps do I have to take to correct those corrupt files? System restore works only some times.

    Read the article

  • The best way to hide data Encryption,Connection,Hardware

    - by Tico Raaphorst
    So to say, if i have a VPS which i own now, and i wanted to make the most secure and stable system that i can make. How would i do that? Just to try: I installed debian 7 with LVM Encryption via installation: You get the 2 partitions a /boot and a encrypted partition. When booting you will be prompted to fill in the password to unlock the encryption of the encrypted partition, Which then will have more partitions like /home /usr and swapspace which will automatically mount. Now, i do need to fill in the password over a VNC-SSL connection via the control panel website of the VPS hoster, so they can see my disk encryption password if they wanted to, they have the option if they wanted to look at what i have as data right? Data encryption on VPS , Is it possible to have a 100% secure virtual private server? So lets say i have my server and it is sitting well locked next to me, with the following examples covered bios (you have to replace bios) raid (you have to unlock raid-config) disk (you have to unlock disk encryption) filelike-zip-tar (files are stored in encrypted archives) which are in some other crypted file mounted as partition (archives mounted as partitions) all on the same system So it will be slow but it would be extremely difficult to crack the encryption. So to say if you stole the server. Then i only need to make the connection like ssh safer with single use passwords, block all incoming and outgoing connections but give one "exception" for myself. And maybe one for if i somehow lose my identity for the "exeption" What other overkill but realistic security options are available, i have heard about SElinux?

    Read the article

  • Best linux USB DVB-T hardware

    - by Roalt
    What is the best supported USB-based DVB-T (free-to-air) tuner for Linux? I've seen a similar question, but this one is PCI-based, not USB: http://superuser.com/questions/104663 I've tried the Conceptronic CTVDIGRCU v3.0 but it does not pick up any channels (although it does work on windows).

    Read the article

  • Get Rid off Computer Virus

    When you hear those words like love bug, back orifice, Trojan horses, and the Davinci virus, you get the shock of your life especially when you see them on your PC. All these are greatly hyped Antivi... [Author: Sarah N Jones - Computers and Internet - April 21, 2010]

    Read the article

  • If I enable/disable my wireless device, my computer will panic

    - by Yinyanghu
    Now, I use Debian 6.0.6 instead of Fedora 16/17. But I still sustain the problem of my wireless problem. If I enable/disable my laptop wireless device or my usb wifi adaptor, my laptop will panic. It seems like all the processes stop at that time and I have to restart my laptop directly. P.S. I think I installed the drivers correctly and the linux kernel may have some bugs. For example, when I unplug my usb wifi adaptor or I use this command, ifdown wlan0 I encounter this problem. Wireless Device: PCI: 03:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01) USB: Bus 002 Device 005: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN

    Read the article

  • Hardware RAID 0 without OS re-installation

    - by sterz
    I have Ubuntu & Windows 7 installed on my hdd. Can I mirror the image of the hdd to the second identical drive? Is this not recommended (i.e have to re-install every OS)? If it is okay to mirror, is there anything else to do to make hw RAID 0 work? Does RAID 0 have the same risk as a single drive? What sector size would you recommend for read/write/extract video files (mostly each around 2 GB)?

    Read the article

  • To same computer Remote desktop thrue WRT54G router

    - by Kangarooo
    Can't access from my Same comp to same comp to test if all is ok. Tried all mentioned posibilities. Tryd my ip xxx.xxx.xxx.xxx / localhost with / without :5900 added with / without in "Remote desktop" checked "Configure network automatically to accept connection" with / without in router WRT54G enabled port 5900 forwardet to my comp 192.168.1.3 UPNP is enabled. I can connect to one other comp whitch isn't using router and checked "Configure network automatically to accept connection" and to one through TENDA W311R+ router where i've put port forwarding to 5900 and there works xxx.xxx.xxx.xxx:5900 What's wrong? What have i missed?

    Read the article

  • computer fails to boot during/after POST for five or six boots, then works

    - by N13
    For the last few days, my computer has had issues booting. I've seen two different behaviors: The screen displays the graphics card information, then begins to list the RAM, hard drives, etc. At different points in this process (after the graphics info), the computer shuts off. After five or six attempts, it then boots normally. In roughly the same time frame, the computer freezes, and fails to boot. I think it boots successfully on the next attempt. I've also noticed that in some instances, the computer freezes on shutdown. It gets right to the point where it should shut off, but doesn't. I recently combined the best parts of two different machines into this one. I'm booting to GRUB, with Ubuntu 12.04, Linux Mint 11 and Windows Vista (unfortunately) as my OS options. It has an Enermax Modu82+ 525W power supply, and I've used an online calculator to determine that my load shouldn't exceed 400W. I even unplugged a hard drive, but that didn't help. I found the latest BIOS, patched it and checked the settings, but that didn't fix it. I'm fairly certain this issue didn't exist at first, but might have started when the power at my new apartment dropped for a second. The machine is plugged into a surge protector strip, but it's old and I've heard they lose effectiveness with age. Is a power dip as damaging as a spike? If something were damaged, why would it boot successfully after five or six attempts? It's almost like the BIOS or PSU need to be primed. The trouble with debugging is that there seems to be a "grace period" after shutdown where the issue doesn't present itself again. What should I try next?

    Read the article

  • Why does this article state that graduate education liberate one from concerns like the efficiency of hardware-based integers?

    - by kadaj
    Quoting The Evolution of Haskell Programmer, graduate education tends to liberate one from petty concerns about, e.g., the efficiency of hardware-based integers What exactly does this suggest? Is it that after graduation, one gets more interested in abstract ideas so much that he does not think hardware is relevant? Or that hardware is also abstracted and one is more interested in algorithms? I am trying to understand on what grounds the sentence is based.

    Read the article

  • Cannot establish ssh connection to computer on local network

    - by ovangle
    I've just (re)installed ubuntu 11.10 on my main pc, and the connection times out every time I try to ssh connect to my laptop (over the local network) to retrieve the files I backed up there. The connection times out every time I try to connect. I can establish a connection in the other direction without issue. Here's the verbose output I get when I try to connect: ovangle@ruby-EP43-DS3:~$ ssh -v [email protected] OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.1.1.4 [10.1.1.4] port 22. debug1: connect to address 10.1.1.4 port 22: Connection timed out ssh: connect to host 10.1.1.4 port 22: Connection timed out ssh is installed on both machines, and I've tried deleting '~/.ssh/known_hosts' on both machines, still nada. I've changed the sshd logging on the laptop to VERBOSE and restarted the daemon (because I wasn't getting any relevant syslog entries otherwise), and this is the log for the most recent connection attempt. EDIT: posted wrong logs last time. They just showed that there was a connection received, they weren't actually the sshd logs (which were in auth.log as I recently discovered). Unfortunately, that log is filling up with extremely weird error messages and it gives me no information about the connection. Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:18 ovangle-A6Rp pkexec[6270]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 2] Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:19 ovangle-A6Rp pkexec[6273]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 7]

    Read the article

  • Computer Says No: Mobile Apps Connectivity Messages

    - by ultan o'broin
    Sharing some insight into connectivity messages for mobile applications. Based on some recent ethnography done my myself, and prompted by a real business case, I would recommend a message that: In plain language, briefly and directly tells the user what is wrong and why. Something like: Cannot connect because of a network problem. Affords the user a means to retry connecting (or attempts automatically). Mobile context of use means users use anticipate interruptibility and disruption of task, so they will try again as an effective course of action. Tells the user when connection is re-established, and off they go. Saves any work already done, implicitly. (Bonus points on the ADF critical task setting scale) The following images showing my experience reading ADF-EMG Google Groups notification my (Android ICS) Samsung Galaxy S2 during a loss of WiFi give you a good idea of a suitable kind of messaging user experience for mobile apps in this kind of scenario. Inline connection lost message with Retry button Connection re-established toaster message The UX possible is dependent on device and platform features, sure, so remember to integrate with the device capability (see point 10 of this great article on mobile design by Brent White and Lynn Hnilo-Rampoldi) but taking these considerations into account is far superior to a context-free dumbed down common error message repurposed from the desktop mentality about the connection to the server being lost, so just "Click OK" or "Contact your sysadmin.".

    Read the article

  • Hardware Mediaplayer display

    - by Eric Audio
    I'm looking for a keyboard or just a little display to attach on my keyboard or something like that, what will show me the music tracks i'm playing in windowsmedia player, itunes, etc. I did some research and the only thing I found are gaming keyboards, but i'm not shure if these show my music tracks. So my question: Does somebody knows a keyboard who show the music tracks or just a little display? Bye, Eric

    Read the article

  • Hardware for Capturing Packets

    - by Kevin
    One of my clients is a small school district in Texas. Like any school, they often have problems with network'd peripherals such as printers, et al. It would be nice to be able to simply "listen" to what the printer and PC are saying to each other (or not saying more importantly)... The problem is that I can't find old-style "hubs" anymore, and even if I could, it's not a long-term solution. All of the devices that I have found to replicate the purpose of a simple hub are either $100+ or are difficult to throw into a networking tool kit (aka my backpack)... Now that hubs are dead, what's the new low-cost standard for simple packet capture in the networking world?

    Read the article

  • How to introduce a computer illiterate 50-year old to programming [closed]

    - by sunday
    The other day my dad asked me a question that I would have never expected from him. "How can I learn C++?" My dad is turning 56 this year and computers are a distant concept for him. He doesn't know how to use a phone very well besides calling numbers (no speed dial or contacts); though he has started to learn computers a little better - to the point that he knows how to open the internet (in Windows) and browse around (and has successfully completed several job applications entirely on his own online, of which he was offered positions too). But still, these are too narrow-windowed experiences to mean much, really. While he may not have the background, my dad knows how to read. And I mean reading as a skill, not just an ability. He has little to no college education (financial problems, family, etc.) and was fortunate enough to finish high school, but still taught himself to become a master electrician and has been one for almost 30 years now. He did the same with guitar, learning to play at a very professional level and has been praised for his skill. In high school, he picked up a weight lifting book - and was the only person in his high school at the time to qualify officially as an "athlete" by national standards. In all cases, he just needed something to read. Something to teach him. He absorbs information like a sponge. I have no doubt in my dad's motivation or capability of doing this, so my general goal is simply: Get my dad into the world of computers, and get him on the road to programming. I strongly believe that once I get him through the fundamentals, his drive and reading skill will keep him going on this own. So I'm asking you all: where should I start with all this? And what are the best resources out there? Should I get him to start Linux instead of Windows? Is C++ a bad idea? Remember, he needs to (IMO) learn computers first, and then get that first grasp (the "Hello world" experience) of programming. For money's sake and at top preference, I'd like free online resources that he can read, but by all means any good suggestions in print or paid-for-online are welcome (that I could possibly look into later to purchase). And also, I intend to start him off with C++ (no Python, Java, etc.), because I know it the best and will be able to help him along the way with code. (I have minimal knowledge right now in other languages). Edit: I'm getting a lot of persistent suggestions to use Python. The only reason I wanted to do C++ is that I KNOW it and can be THERE when my dad needs help. My VERY FIRST exposure to programming ever was Java. I learned Java, and I got good at it. I open to other suggestions, but please provide an effective application of your suggestions. EDIT #2: I understand my approach/thinking/knowledge could be lacking here. I'm a sophomore level undergraduate CS major. If you don't agree with anything in my post, tell me why - give me ideas, information - that's why I'm asking in the first place. To narrow down my general goal to specific reachable goals.

    Read the article

  • Hardware imposed 32-bit limit

    - by knittl
    i'm thinking about converting my OS (ubuntu) to the 64 bit version to use the last bit of memory (4 gb)—ok, it's rather reinstalling … will this work as expected or are there possible limits given by the mainboard/memory controller/some other component, so i cannot fully utilize my full ram? if so, are there benefits from upgrading anyway?

    Read the article

  • Hardware imposed 32-bit limit

    - by knittl
    i'm thinking about converting my OS (ubuntu) to the 64 bit version to use the last bit of memory (4 gb)—ok, it's rather reinstalling … will this work as expected or are there possible limits given by the mainboard/memory controller/some other component, so i cannot fully utilize my full ram? if so, are there benefits from upgrading anyway?

    Read the article

  • Advice for outdoor wifi hardware and topology

    - by Robot
    I haven't setup any wifi networks other than an access point or two at any single location, so I'd like advice on how to setup an outdoor/weatherproof network in an area approximately 150 feet by 200 feet. The interesting thing is there are a pair of pools in the middle of the coverage area. Here is a picture: blue is pool, green is coverage area, yellow is building with wired access. Can anyone advise me on weatherproof APs, antennas and placement for best coverage of the pool deck? I've looked at the Meraki stuff, but I'm thinking it's overkill.

    Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >