Search Results

Search found 29432 results on 1178 pages for 'mite fine dailes'.

Page 60/1178 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >

• DVD Drive Failing on Windows 7

  - by Seth Spearman

  I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

  Read the article

• iptables forward rule not working in openwrt

  - by Udit Gupta

  I am trying to apply some iptables forwarding rules in openwrt. Here is my scenario - My server has two cards ath0 and br-lan. br-lan is connected to internet and ath0 to private network. The other m/c in n/w also has ath0 that connects with this server's ath0 and they are able to ping each other. Now, I want other m/c in network to use internet using br-lan of server so I thought of using iptables forwarding rule- Here is what I tried - Server : $ ping 1.1.1.6 // <ath0-ip of client> works fine $ iptables -A FORWARD -i ath0 -o br-lan -j ACCEPT $ /etc/init.d/firewall restart Client : $ ping 1.1.1.5 // <ath0-ip of server> works fine $ ping 132.245.244.60 // <br-lan ip of server> (not working) I am new to iptables stuff and openwrt. What I am doing wrong here ?? Any other help if anyone could suggest for my scenario Edit- m/c - machine n/w - network

  Read the article

• 401 - Unauthorized On Server 2008 R2 IIS 7.5

  - by mxmissile

  I have a web application deployed to Server 2008 IIS 7.5 box. From remote it gives this error: 401 - Unauthorized: Access is denied due to invalid credentials. (remote = desktops on the same LAN) Have tried several remote clients using different browsers, all the same result. (IE, FF, and Chrome) Hitting the application from the desktop of the server itself works flawlessly. However I have not tried Firebug on the server desktop. I would assume it's still issuing a 401 status code yet returning the content anyway. See Update #2. The application is using Anonymous Authentication. The application is written in .NET 4.0 Asp.Net using the MVC framework. Static content works fine, example: http://server.com/content/image.jpg Sysinternals procmon returns these 2 results for each request: FAST IO DISALLOWED and PATH NOT FOUND. I have 2 other MVC apps running fine on the same server. I have checked the security on the folders and they all match. App runs fine on a Server 2008 IIS 7.0 box. Nothing shows up in the Event log on the server related to this. Pulling my hair out here, any troubleshooting tips? UPDATE #1: This just get's more WTF as I dig. If I click on the Application in IIS Manager - Error Pages - Edit Feature Settings select Detailed Errors, the app works remotely. Not leaving this on, so problem is not solved yet, its just more confusing. UPDATE #2: Using Firebug, I see that the Status is still 401 Unauthorized, but the Response is returning the application's correct HTML. UPDATE #3 Playing around with Failed Request Tracing, here is the WARNING Request Trace that is causing the 401: ModuleName ManagedPipelineHandler Notification 128 HttpStatus 401 HttpReason Unauthorized HttpSubStatus 0 ErrorCode 0 ConfigExceptionInfo Notification EXECUTE_REQUEST_HANDLER ErrorCode The operation completed successfully. (0x0) Update #4 Regular IIS log is showing this: #Software: Microsoft Internet Information Services 7.5 #Version: 1.0 #Date: 2010-07-20 19:17:22 #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status time-taken 2010-07-20 19:17:22 10.10.1.10 GET /Purchasing/Home - 80 - 10.10.1.12 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US;+rv:1.9.2.6)+Gecko/20100625+Firefox/3.6.6 401 0 0 4414

  Read the article

• Is there a way to browse a media server (MediaTomb) with a media player (VLC)?

  - by twig

  I currently have an EEE PC set up with LinuxMint as my media server using MediaTomb. I use VLC as my media player on another Windows computer to watch videos off the media server. It works fine, but the current process is: Open up browser and navigate to folder Find the file I want to play and copy URL Paste URL into VLC and watch. This is fine for me on the PC, but it is a little troublesome for my parents to grasp (or for me to use on the phone). Ideally I'd like to: Open up VLC Browse to the file (using VLC) Click/select to play If there is any solution which is similar to this, please let me know. I'm willing to change the software on both server and client to accommodate (although it somewhat depends on which formats are supported on the server) Side note: I've tried searching online for this but I find a lot of jargon such as "media server/centre", media streaming, DLNA, UPNP and feel that some people are either using them interchangeably or incorrectly.

  Read the article

• How to get Virtual PC to recognize MIDI devices?

  - by bparker

  Hey all. I have an XP Pro virtual machine running inside Virtual PC 2007. My host machine is x64 Windows 7. I have a MIDI keyboard hooked up to my machine via a Turtle Beach USB to MIDI 1x1 cable. I have installed the driver and software on my host machine and ran a soundcheck, and everything appears to be working fine. Playback is sent to the MIDI device with no problems. However, when I attempt to install the driver and run a soundcheck in my XP virtual machine, the device is not found. Other USB devices (mouse, keyboard, flash drives) work fine in the virtual machine, but not they MIDI keyboard. I'm not sure what steps to take in order to troubleshoot the and get the VM to start recognizing the MIDI keyboard. Any help or suggestions would be greatly appreciated. Thanks.

  Read the article

• Random flickering on 2.6.32 kernels after suspend

  - by whitequark

  I have XUbuntu 9.10 installed on a Toshiba NB200 netbook with Intel video card that's handled with i915 driver. With 2.6.31 stable, recommended kernel everything but WiFi works fine: Atheros ath9k WiFi shows too small signal power and loses packets in 'bursts' sometimes. With 2.6.32-* (I tested -9 to -11 from Ubuntu's kernel unstable ppa) everything works fine just prior to first suspend: echo mem >/sys/power/state. After it random unidentified fullscreen 'one-frame' flickering begins in Xorg, and after a couple of minutes everything eventually hangs while showing filled grey (not white; it is like default button colour) screen; no X keys are working: Ctrl+Alt+Fn don't, blind typing in console too. Magic SysRq still works and I was able to reboot. Also there is one out-of-tree kernel module called omnibook that is required to turn on WiFi and Bluetooth. Any advices?

  Read the article

• How to connect to a PEAP GTC wifi network with Android 2.2 on a nexus one?

  - by Glen

  Hi, I recently updated my nexus one to 2.2. Now I can't connect to my uni's wifi. They use PEAP with GTC. I had it working fine on 2.1. Also it works fine on my Ubuntu laptop. I have entered my uni number (user name) in the identity box. I have entered my password in the password box. I have emailed the certificated that works on Ubuntu to my self and installed it on the nexus one. I have enabled secure credentials. What am I doing wrong? Thanks, Glen.

  Read the article

• Visual studio 2010 Express edition on netbook?

  - by Amitabh

  Is it fine to install Visual Studio 2010 Express edition on a netbook?

  Read the article

• WD My Passport detected but not assigned a drive letter

  - by abel

  I have a WD My Passport external drive which used to work fine on my Win7 x64 box until recently. Since the past few days, windows would not detect my external drive. However, Storage under disk management lists my external drive(which means windows can see my drive) but without a drive letter. I am not able to assign a drive letter(the option is grayed out). I installed EASUS Partition Manager which allows me to assign a drive letter, but fails to do so when I apply to save changes. What do i do to assign a drive letter to the drive or make windows to detect it as of old? The external drive works well on Win7 x32(dual boot, same system) and win7 x64 on another box. Update: cant comment from Opera Mini 6 @zeke the drive works absolutely fine on other Win7 boxes and on the dual boot win7 on the same system.

  Read the article

• Problem with xvideoservice thief

  - by Nrew

  Xvideo service thief is an application that allows you to download and convert youtube videos into .avi format. The problem is when it tries to convert the .flv into a .avi. The audio in the video is not being played when you try to play the video. But the .flv works fine. I have also enabled Intel(R) speedstep feature in my processor(Pentium Dual core E5200) to decrease the power consumed by the processor with the help of Granola software. What might be the reason for the audio less video converter by xvideo service thief? Could it be the enabling of intel(R) speedstep? Because the software works fine when its not enabled. Is this possible?That the output some applications can be altered when enabling this processor feature?

  Read the article

• Compaq Presario CQ40 unexpected turn off

  - by CRoshanLG

  My Compaq Presario CQ40 (yeah, its pretty old) suddenly turns off after about 1/2 - 1 hour usage without any notice or warning. The power cable and adapter works fine (indicator bulbs show that power is given to the laptop), but it seems like machine suddenly plugged off from the power source. And when I try to switch it on, after the sudden turn off it simply won't turn on. I can only turn it on after letting it to rest for at least couple of hours! ** The battery has been dead for some time now, but it has been working fine on direct power supply until recently. Has anyone encountered this? and hopefully knows any cure?

  Read the article

• ORA-12705: invalid or unknown NLS parameter value specified

  - by viky

  I have a j2ee application hosted on jboss and linux platform. When I try to access the application , I see following error in server.log file. ORA-12705: invalid or unknown NLS parameter value specified When I point the same jboss instance to a different schema, the application works fine. I tried to go through few forum and found that the NLS parameter settings are fine. Can anyone help. Jboss version = 4.0.2 DB version = oracle 10.2 output of locale command on linux $ locale LANG=en_US.UTF-8 LC_CTYPE="en_US.UTF-8" LC_NUMERIC="en_US.UTF-8" LC_TIME="en_US.UTF-8" LC_COLLATE="en_US.UTF-8" LC_MONETARY="en_US.UTF-8" LC_MESSAGES="en_US.UTF-8" LC_PAPER="en_US.UTF-8" LC_NAME="en_US.UTF-8" LC_ADDRESS="en_US.UTF-8" LC_TELEPHONE="en_US.UTF-8" LC_MEASUREMENT="en_US.UTF-8" LC_IDENTIFICATION="en_US.UTF-8" LC_ALL=

  Read the article

• Mac Mini won't boot with USB Drive connected

  - by Jens

  Newbie here. I have a 2012 MacMini with 2 x 3Tb Seagate GoFlex Desk external hard drives. Both drives have their own power supplies and work perfectly. I use both MacOS and Windows7 on the Mac for different reasons. Both boot and work fine. The only problem is neither MacOS or Windows will boot while the two USB drives are connected. I must disconnect the USB cables, boot and reconnect them. Then all works fine. Its rather annoying since this is mostly a Media Centre and you really don't want to be playing with cables every day, and I don't leave my stuff on over night. Can anyone help? Thanks Jens

  Read the article

• kerberos5 unable to authenticate

  - by wolfgangsz

  We have a Debian file server, configured to serve up samba shares, using winbind and kerberos. This is configured to authenticate against a Windows2003 DC. All worked fine until recently when I did a maintenance update on all packages. Since then, all attempts to connect to any of the shares (and also to just log into the box) fail. The logs contain this message, which seems to be at the root of the evil: [2009/09/14 12:04:29, 10] libsmb/clikrb5.c:get_krb5_smb_session_key(685) Got KRB5 session key of length 16 [2009/09/14 12:04:29, 10] libsmb/clikrb5.c:unwrap_pac(280) authorization data is not a Windows PAC (type: 141) [2009/09/14 12:04:29, 3] libads/kerberos_verify.c:ads_verify_ticket(430) ads_verify_ticket: did not retrieve auth data. continuing without PAC From there on it fails to find the user account on the DC, subsequently remaps the user to user nobody and then (rightly) refuses to grant access to the share. However, the following works just fine: wbinfo -a user%password I was wondering whether anybody has had this problem and could provide some insight. I would be happy to provide neutralised config files.

  Read the article

• Windows Firewall issues

  - by Will Vousden

  I'm not sure whether this is a Windows problem or a .NET problem (i.e. whether it belongs here on on SO), but I've written a small HTTP server program in C# (using the .NET HttpListner class) which works fine for the most part, but Windows Firewall seems to be refusing to let connections through to it from anything other than localhost. I've added exceptions for TCP and UDP in the "Inbound Rules" section of the firewall settings, essentially duplicating existing rules for other HTTP-based services which work fine (e.g. foo_httpcontrol). Specifically, I've added separate rules for TCP and UDP connections covering all ports, specific to the executable I'm running. There's no problem when Windows Firewall is disabled, but if I enable it, the connection simply times out.

  Read the article

• L2TP server - site-to-site vpn connection

  - by Pyro

  I am not sure this is the right place for this question but here goes. We want to connect users using an L2TP VPN connection to a users at the other end of a SonicWall site-to-site VPN. Currently we have a SonicWall firewall/router contraption in the home-office that is connected to a far-office over a VPN. Communications with machines in the home-office and far-office is fine. We also have an L2TP server running on the SonicWall that outside users can connect to. This gives them access to machines in the home-office. Communication between outside users and the home-office is fine. However outside users connected to the home-office via the L2TP server can't communicate with machines in the far-office. Will there need to be network bridging or routing needed? Or will this simply be a firewall setting to get this working? Thanks for any help or clues you provide! Rob

  Read the article

• Disable laptop's display on boot when used with external display

  - by Ryan

  I keep my laptop tucked away and solely use an external display with it via HDMI. In Windows 7 display settings, I have it set up to "Show desktop only on 2 [my external display]" This works fine in all cases except when I boot the laptop when the external display is already connected. In that case, the laptop's display stays on and sticks at the Windows 7 boot logo unless I manually shut the display off. (I should mention that while the laptop's display is stuck at the boot logo, the external monitor and computer are running just fine.) The laptop is an Asus N56VZ with Nvidia 650m graphics and the latest drivers. I've checked Nvidia's control panel as well as the BIOS and nothing looked very promising. Any ideas as to how I can get my laptop screen to shut itself off after booting into Windows?

  Read the article

• Getting packets from one port to another on a Dell PowerConnect 2824 switch

  - by Arvo Bowen

  I have a dell PowerConnect 2824 and I have a cat 5 cable connected from port 1 to port 23. Port 1 is reserved for VLAN 1 (the only VLAN that can manage the switch) and port 18-23 belong to VLAN 112. I currently have the switch setup with ip 10.71.3.5/27 and a test machine plugged into port 22 with IP address 10.71.3.30/27. For some reason I can not ping 10.71.3.5 from my test machine (10.71.3.30). Note: When I try to ping the server plugged into port 21 (IP: 10.71.3.7/27) also VLAN 112, I get responses just fine. Note: When I plug my test machine directly into port 1, I can ping 10.71.3.5 just fine. Quick Recap: Switch IP: 10.71.3.5 Port 1 - dedicated to management - (VLAN1) Port 21 - SERVER (10.71.3.7/27) - (VLAN112) Port 22 - test machine (10.71.3.30/27) - (VLAN112) Port 23 - dedicated to management (to hop over to VLAN 1 from VLAN 112) - (VLAN112)

  Read the article

• Tablet pen loses pressure sensitivity after screensaver

  - by Rohit Nair

  Tablet: Genius MousePen 8x6 System: Windows 7 64-bit The question says it all. When I first boot up my machine, the tablet works fine, with pressure sensitivity functionality. However, if I leave the machine long enough for the screensaver to start up, when I return, the tablet works just like a mouse, and does not respond to changes in pen pressure. Unplugging and replugging the device does not fix the problem. Disabling and enabling the device in device manager does not fix the problem. When I try to use the tablet config tool -before- screensaver, the pressure config works fine. It gives you a little area where you can draw to test out the pressure. When I try to use the same tool -after- screensaver, the moment I click on that drawing area, the config tool freezes.

  Read the article

• VLC Media Server

  - by Josh

  We are using VLC on ubuntu, and trying to set up a streaming media server. We have the http interface working fine from remote computers, and we can also see the video playing as text if we don't screen VLC. Our problem is the output streaming. When we use the main VLC page you get when you goto the servers IP it does not save the output MRL (refreshing page it will go away, even after clicking save.) We tried to VLM page and it appears to work fine from the http page (it buffers, plays, timers go up when not paused, etc.) However, we still cannot connect remotely with a VLC client. The output parameters do save properly on the VLM page. We are noobs when it comes to this. Does anyone have a very to the point procedure of getting a file X to play and stream on ubuntu using VLC assuming VLC is installed?

  Read the article

• Western Digital not recognized by Windows after power Outage on windows

  - by vikasde

  I have WD Essential Plus 1.5TB (formatted in NTFS). It was working fine under windows and mac mini. While it was connected to the mac mini, I had an power outage and now the HD is not being recognized under windows anymore. Now on the mac mini the HD is fine and I can see my data. When I use ActiveBootDisk under windows, then I can see the data as well. I updated the drivers on windows machine and also updated the firmware on the HD, but its still not being recognized. Is there any way for me to fix the HD under windows without having to re-format it?

  Read the article

• File open fails initially when trying to open a file located on a win2k8 share but eventually can su

  - by Ruddy Douglass

  Core of the problem: I receive "(0x80070002) The system cannot find the file specified" for roughly 8 to 9 seconds before it can open it successfully. In a nutshell, we have two COM components. Component A calls into Component B and asks for a UNC filename to write to - the filename returned doesn't exist yet, but the path does - it then does its work, creates and populates the file, and tells Component B its done by making another com call. At that point Component B will call MoveFile to rename the file to its "official" name. This code has worked for (literally) years. Its works fine on win2k3. Its works fine when its running on win2k8 and points to a share on a win2k3 server. It also runs fine, if the share is actually located on the same win2k8 machine that the code is running on. But if you run it on win2k8 and point it to a share on a different win2k8 server, it fails. Both Component A & component B exist in their own Windows Service running with as a domain admin account. The shares are configured for "Everyone/Full control" in all test environments, similarly so are the underlying folders that the share points to. All machines are in the same domain. During debugging I realized the file actually does exist by the time I get to checking manually for it - after several iterations it occurred to me that the file doesn't "show up" until some delay passes by - so I put in the loop below in component B as shown below: int nCounter = 0; while (true) { CFileStatus fs; if (CFile::GetStatus(tempname, fs)) break; SleepEx(100, FALSE); nCounter++; } This code does, in fact, exit and nCounter is generally between 80 & 90 iterations when it does -- indicating the file "appears" approx 8 to 9 seconds later. Once that loop exits the code can successfully rename the file and all further processing appears to work. I put a CFile::GetStatus in component A immediately before it calls into Component B and that indicates success - it can see the file and get its true size yet the call into component b made immediately after can not see the file until the above indicated delay passes. I have verified the pathnames are precisely the same, even though it would clearly have to be for the calls to eventually succeed after a pause of 8 to 9 seconds... When something like this occurs I always assume there is a bug in my code until proven otherwise, but given (a) this code has executed properly for a very long time and (other than my diagnostic loop added) has not changed, and (b) it works in all environments except the win2k8 - win2k8 share, I'm guessing there is some OS issue in here that i do not understand. Any insight would be helpful. Thanks!

  Read the article

• PCMCIA preventing laptop from booting up

  - by Pongus

  My friend has brought his dead laptop over. It is a Sony Vaio with Windows Vista. When booting up, it blue screens and reboots. I have tried to boot up with Knoppix and this will freeze when starting up PCMCIA. If I start Knoppix with knoppix nopcmcia it disables pcmcia and boots up fine. So I presume there is a problem with the PCMCIA controller on the laptop. My friend does not use any PCMCIA cards, so doesnt really need it. Is there anyway I can similarly disable PCMCIA so that Windows will boot up fine?

  Read the article

• Mixed network, Linux-to-Linux hostname resolution issues

  - by James

  At work we have an WinSBS domain at the heart of our network, which is all Windows PCs. The domain controller is acting as a DNS for these computers. I have recently added some personal use Linux machines to the network, without joining them to the domain. I have set up Samba with "wins server" pointing to the domain controller, which lets the Windows boxes resolve the Linux hostnames just fine. I also have resolvconf set up with the domain controller as a nameserver and the local domain as a searched domain, which lets the Linux boxes resolve the Windows hostnames just fine. However, the Linux boxes will not resolve other Linux hostnames at all. Given that I don't have control over the DNS server (I am not the network admin) and that at least one of the Linux boxes is not an always-on machine and is likely to change its LAN IP frequently (via DHCP), what service am I missing to make their hostnames visible to each other?

  Read the article

• Kerberos: connection from win app running from IIS to SQL failed

  - by Mikhail Kislitsyn

  I have an IIS web-application with Windows authentication and impersonation. This application connects to SQL server. In this case Kerberos works fine. But there is a problem. Web-application runs windows application (not .NET), which also connects to the SQL server. Windows application runs with IIS app user credentials and impersonates current site user to connect to SQL server. scheme: http://i.stack.imgur.com/2cgv7.png When delegation for IIS user is set to "Trust this computer for delegation to any service" everything works fine. But I can't use this type of delegation according to security requirements. When I set delegation to "Specific services" and choose MSSQLSvc SPN, connection from windows application fails with "ANONIMOUS" fault. WireShark shows "KRB5KDC_ERR_BADOPTION" packet. What I'm doing wrong?

  Read the article

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67  | Next Page >