Search Results

Search found 37931 results on 1518 pages for 'computer case'.

Page 602/1518 | < Previous Page | 598 599 600 601 602 603 604 605 606 607 608 609  | Next Page >

• Ubuntu 11.10 USB 3.0 HDD

  - by Chazm

  I have a problem with my external HDD (WD My Book Essential 1TB) working on USB 3.0 port. I'm using dual boot setup with Windows 7 and Ubuntu 11.10, both 64 bit. While I'm running Windows and rebooting back to Windows everything works well. When I'm switchin to ubuntu everything works great as well. But after 1st reboot from ubuntu neither windows nor ubuntu mount the external drive. I have to reboot the device manually. I suspect that the problem is with unmounting the device on shutdown on ubuntu. The case concern only usb 3.0. When i plug the same device into usb 2 port the problem doesn't persist. Does any1 hit the same problem or have a clue what might goin wrong?

  Read the article

• How do people maintain their test suite?

  - by Ida

  In particular, I'm curious about the following aspects: How do you know that your test cases are wrong (or out-of-date) and needed to be repaired (or discarded)? I mean, even if a test case became invalid, it might still pass and remain silent, which could let you falsely believe that your software works okay. So how do you realize such problems of your test suite? How do you know that your test suite is no longer sufficient and that new test cases should be added? I guess this has something to do with the requirement changes, but is there any systematic approach to check the adequacy of test suite?

  Read the article

• category title and affect on SEO and ranking [closed]

  - by Mark

  We are working on a jobs and skills website (similiar to Skill Pages) and are deciding on the names of categories. Rather than having loads of categories and sub-categories like, for example, Builder, Electrician, Carpenter etc, we would like to have more general and easier on the eye category names. So for example we have House, Computer, Education, Art etc. So a builder would be in category House and a few others. Will this style negatively effect our SEO and ranking? And if so, should we abandon and go back to traditional categories and sub-categories?

  Read the article

• Neverwinter Nights does not run in 12.10

  - by 0x0me

  I recently installed a fresh version of Ubuntu 12.10 on my notebook. Then I copied the backup copy of my nwn folder from my old 12.04 install on the same computer to the new installation and tried to start the game. The terminal prompt disappears and top shows some low activity on nwmain, but there is neither showing up the game graphics nor plays any music. Any suggestions how to fix it? The game runs fine using the same setup expect for running on 12.04. Kind regards and thanks in advance

  Read the article

• How do I replace Unity?

  - by Krista O'Connors

  I wanted to use Ubuntu 12.04 for its long term support. But I cannot stand Unity. I cannot find a way to replace it with compizconfig, so I tried replacing it with Lubuntu. When I restarted my computer started to load lubuntu, then just went right on with ubuntu as if nothing had happened. Likewise, it shows lubuntu when it shuts down. What is the deal? I'm confused here, is ubuntu 12.04 supposed to be an operating system or a desktop interface? Can I even run ubuntu with a Lubuntu interface? Is there a way to do this in compizconfig that I should be doing instead?

  Read the article

• virt-manager not installing

  - by Registered User

  I am trying to install virt-manager on 11.10 on 64 bit machine sudo aptitude install virt-manager here is where it stopped the install Processing triggers for python-support ... Errors were encountered while processing: libvirt-bin E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up libvirt-bin (0.9.2-4ubuntu15) ... useradd: cannot lock /etc/passwd; try again later. adduser: `/usr/sbin/useradd -d /var/lib/libvirt -g kvm -s /bin/false -u 118 libvirt-qemu' returned error code 1. Exiting. dpkg: error processing libvirt-bin (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: libvirt-bin What should be done in this case to resolve it?

  Read the article

• Leapfrog Crammer won't mount as a USB flash drive

  - by William

  I can't seem to get the Leapfrog Crammer study and sound system to show up as a flash drive under ubuntu so I can transfer stuff to it. I don't want to install the leapfrog bloatware, can someone help me with this? Additional Information: When I plug my crammer into my computer it shows a 1 MB file system with a link to download the crammer software. I want to know how to access the rest of the crammer's file system so I can transfer music to it. The crammer does not show any other partitions in natulius. According to an article on the internet, the crammed is divided into three partitions: One with a link to install the crammer software, one with all content(music, flash cards, etc.) and one for firmware. I want to know how to access the one with the content so I can add music to the player. Can anyone help me with this? Thanks in advance.

  Read the article

• What is the best stucture of SEO friendly URL?

  - by Aajahid

  I'm working for a website to convert the website URL to an SEO friendly URL. I plan to use this: mysite.com/category-name/pageid-123-page-name I looked at some similarly categorized, highly ranked websites. They have the same structure, except for one thing. In one case, the URL format was thissite.com/category-name/pageid-123-page-name.html Another was thatsite.com/category-name/pageid-123-page-name.php Now I know the text in URLs help with SEO. Is it more helpful to have a file extension? If yes, which one is better? Or if my current plan is okay, will it be better with a / at the end?

  Read the article

• compiz problems - no effects work, despite the fact that they seem to be properly configured

  - by user97551

  I've looked through some posts about compiz and either haven't found the answer, or haven't understood what's been said. Could someone help me out? I installed ubuntu 12.04 through windows 7 (so I can dual boot) and installed compiz and set up the settings I want (hotcorners etc). For a while it seemed like it was going fine, but then I restarted the laptop, none of the compiz settings were working and the auto-launcher wasn't even coming up when I passed cursor over it. The computer is still usable, when I 'dash home' the auto-launcher appears, and I can tab through windows but yeh... the auto-launcher and hotcorners I set up through compiz aren't working at all. Any ideas? Oh, whilst I'm super grateful for any help I can get, I'd really appreciate it if you could keep any instructions as basic as possible. I'm a bit new at this... THANK YOU!

  Read the article

• Setting up fastcgi on an Ubunutu server (socket file permissions issue)

  - by gray alien

  I am trying to set up mod_fcgid on my server. Part of the requirement is that Apache needs to create a socket file for mod_fcgid. I specified the folder for Apache to write the socket data to: /var/run/apache2/fcgid I then specified this file in my fcgid.conf file as follows: SocketPath /var/run/apache2/fcgid/sock I then changed the owner of the folder to www-data (the apache user) and gave the owner full permissions to the folder and its contents. I was able to run my test fcgi app then. When I rebooted the machine, y fastcgi app no longer worked. After some investigation, I found that ownership of /var/run/apache2/fcgid has been reset to root, and with permission reset to 700 I have the following questions: Is there something specific about the /var/run folder? why is the permissions being reset after a reboot? Should I move my socket file to another location (in case root automatically takes ownership of contents in this folder for security reasons?) I am running Ubuntu 10.0.4 LTS 64 bit

  Read the article

• How to automount usb drive reliably without fstab

  - by user103279

  Hi I need a way to mount a usb drive without using fstab. I Cannot use fstab because the drive is not connected to my computer at boot. This causes an issue during any one off reboots because start up hang waiting for this device until a keyboard intervention to skip it. I cannot use my current script with just does mount /dev/sde1 /media/Backup because sometimes it changes to sdf. Consider this a server install. I can't use tools at the user or GUI level. I suppose the sum of my question is how to manually mount a usb drive from the commandline considering the reliability of the /dev/sd value isn't consistent. Thanks,

  Read the article

• Why Can't Computers Off My Network See the Site? [migrated]

  - by nmagerko

  Have just set up Apache, PHP, MySQL, etc. on my Ubuntu OS, and I was wondering why computers that are not on my network can not see the basic index.html that Apache uses as the default. I set up the static ip address for my computer, and I use 192.168.1.100 for computers to view the simple site. Is there something I am missing that will allow others to access my site? (It is REALLY simple; no graphics, CSS, etc.)

  Read the article

• Languages and tools that are "portable" (work well from a USB storage drive) [closed]

  - by CodexArcanum

  I'm a huge fan of running programs from my portable hard drive: it means I always have my favorite tools no matter what computer I'm on. Sadly, development tools seem to be hard to get portable at times. I recently realized that the "portable" version of MinGW I was using off my USB drive was actually interfering with a locally installed version of MinGW, so sometimes even the tools you think are portable, aren't. So what are the best portable development tools that you've used? What runs well on a portable media, leaves the host machine clean, and generally makes moving around easier for you?

  Read the article

• How do I know if I've gone too far with processing things in a game?

  - by ThePlan

  A common programming quote I see every day is: Premature optimization is the root of all evil! I admit I'm one of those guys that like to do premature optimization in a pretty obssessive manner but that's probably because I'm not aware how powerful modern processors are. I can think of lots of sollutions for a problem, but all of them are tough on the memory side, and I keep thinking "This will hurt me more in the future when I'll have to re-do it because it's bad performance-wise." How do you know when the code you are thinking of is going too far and is not a case of premature optimization? How much can your game handle at a time before performance becomes a problem?

  Read the article

• WiFi is painfully slow, sometimes stops altogether

  - by Zelda64fan

  Lately my WiFi connection has been quite slow, and sometimes I lose my internet connection altogether (but the computer does not actually disconnect from the WiFi network). This only affects my laptop and only when it's running Ubuntu, so I think it must be a problem with Ubuntu. I haven't changed anything recently; this is on 12.10 64-bit. What could it be? Update: It's doing this now. The connection isn't completely dead, it's just staying under 5 kB/s. Still frustrating though. It also seems to affect all users.

  Read the article

• 11.04 Wireless is disabled by hardware switch Hp Compaq nc6220

  - by user75711

  Here is some backstory if it is helpful: I had Windows Vista on my computer and I wanted to use wubi to install Ubuntu, everything was fine until I booted into the OS. It said my wireless was disabled by a Hardware Switch. So I booted back into Vista and it disabled there too. I have gotten rid of vista and installed 11.04 instead. It still has this error and as far as I know there is no switch anywhere and the fn keys do nothing. My lshw is: *-network DISABLED description: Wireless Interface product: PRO/Wireless 2915ABG [Calexico2] Network Connection vendor: Intel Corporation physical id: 4 bus info: pci@0000:02:04.0 logical name: eth1 version: 05 serial: 00:15:00:0c:5d:62 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver-ipw2200 driverversion=1.2.2kmprq firmware=ABG:9.0.5.27 (Dec 12 2007) latency=64 link=no maxlatency=24 mingnt=3 multicast=yes wireless=IEEE 802.11abg resources: irq:21 memory:d0400000-d0400fff Thanks

  Read the article

• Using Git in Enterprise environment

  - by sarat

  Git is an excellent version control. If we exclude the fact that, it doesn't have an excellent GUI support, it's really good and fast. But the source controls like Clearcase has large support for enterprise customers. Companies investing huge amount for source control servers and licesense. Of late most of the large companies like Google adopting Git over the other version controls. But the company is having strong open source group which consistently provide development and support for the tool (Even they might be having a custom version of Git of their own). At the same time, large companies are not really bothered about adopting open source projects and make it relevant for them. Is Git really a reliable tool for enterprise environment, especially for Windows Platform? The support is a question for Git as it's an open source version control. Any companies are there to provide solutions and support? How the server costs comparing to other version controls like Clear-case?

  Read the article

• Custom vs. browser-native scrollbars

  - by vemv

  Including customizable, JavaScript-based scrollbars (and scrolling functionality in general, i.e. bind the control to the mouse scroll wheel) in your webapp can be a great temptation. However all solutions I could find were developed by individuals (which can equal lack of formal or future support). In addition I fail to remember any mainstream site using them. In my particular case, no-JavaScript or IE6/odd-browser environments are not intended to be supported. Should custom scrollbars be avoided nowadays? If not, what's the best option one can choose?

  Read the article

• Setting up wireless drivers in Ubuntu 9.10?

  - by xdya

  I've just installed ubuntu to a notebook, deleting the windows xp that was installed before, so now nothing works I couldn't solve the problem of getting the blank screen with the versions 12.. and 10.. so now there is 9.10 installed, which works fine. Well, it boots up at least. I can't get working the drivers though. I'm totally new to linux, and I've read in some forums that in this version you have to install all of them yourself, because the system won't detect them automatically. Therefore I tried to find the drive for my wireless card, but actually I have no clue how to get it work. Could someone please help me out? So here are the specs: System installed as mentioned: Ubuntu 9.10 Computer: Acer Aspire 3100 Wireless according to laptop specs: 10/100 Fast Ethernet, Wake-on-LAN ready, Acer InviLink™ 802.11b/g Wi-Fi CERTIFIED I would really appreciate some detailed description to setting up my internet Thanks!!

  Read the article

• Strange sound distortion using headphones

  - by Luca

  When I use headphones, the sound comes out distorted. Voices sound as if they were far away, while instruments that should be in the background sound enhanced. When I play songs with the laptop's integrated speakers everything is alright, and the headphones work normally when plugged into another computer. I tried reloading ALSA and reinstalling some of the related packages, but nothing worked. I'm using Xubuntu 12.04 32-bit. Thanks to anyone who will suggest me how to solve this problem.

  Read the article

• How to push through a domain transfer in spite of the 60 day rule

  - by corsiKa

  I recently purchased a domain through a registrar which I won't name here. Within the first five minutes of logging in, I found a severe vulnerability that allows me access to all registration details of all users. Simply put, I do not trust this registrar with any kind of business. But I'm unable to transfer the domain because, for some reason, it has to exist in its current state for 60 days. We're planning to launch the site this weekend - we can't wait 60 days. But I can not trust this registrar: if I found such a severe vulnerability in the first few minutes, how many more similar un-trustables will I find in those 60 days? Is there a higher authority to whom I can submit a case to get my domain transferred to a different registrar?

  Read the article

• Internet Not Working... Initially Worked fine

  - by Sneha429

  I am using an HP Pavilion desktop, not sure of exact model, etc. Initially saucy looked and worked great. It's my parents, and after two days of no issues, they started having more than a few. The mostly use the internet to access email and videos. I believe Google Chrome was the only application they used. Then, the internet stopped working. Restarting didn't fix it, neither did turning the internet on and off. The computer went from lightening fast to inexplicably slow. I've read some other posts about the internet not working, but none seemed applicable. Any suggestions?

  Read the article

• Why can't I access hw:1,0 until gstreamer-properties is run once?

  - by Shadd

  Not necessarily an Ubuntu-specific question but I wasn't sure where else to ask. I have an AverMedia DVD EZMaker 7 which plugs into USB and works well on Ubuntu 12.04. I downloaded and installed the official drivers without error. However, when I try: gst-launch alsasrc device="hw:1,0" ! alsasink device="hw:0,0" it tells me: Setting pipeline to PAUSED ... Pipeline is live and does not need PREROLL ... Setting pipeline to PLAYING ... New clock: GstAudioSrcClock which is the normal output, however there is no audible sound. Trying the command again doesn't help. If I run gstreamer-properties and close it right away (don't need to touch any controls), THEN the gst-launch command works. If I unplug the device and plug it back in or restart the computer, I have to run gstreamer-properties again. What is gstreamer-properties doing that enables the audio?

  Read the article

• Fujitsu B6220 laptop, sometimes my desktop freezes upon resume from standby

  - by user89756

  I installed Ubuntu 11.10 on my Fujitsu Lifebook B6220 laptop just before 12.04 was released. I can not remember if I had this issue with Ubuntu 11.10 as I updated the install to 12.04 about a week after 12.04 came out. My problem is that sometimes upon resume from standby my desktop is frozen. The keyboard, touch pad, and touchscreen work, but there is no response from the desktop. I can ctrl-alt-f2 and log in and then from there I just reboot the computer. This happens about 50% of the time when I resume from standby but I have not noticed a distinct pattern. I have thought about reinstalling 12.04, since I upgraded 11.10 to 12.04 instead of a fresh install. But I have customized my laptop a lot and I would prefer to avoid reinstalling it, I'm not even sure if that would fix it. Anyone have a idea what might be the problem? If I should submit this as a bug, could someone point me in the right direction please? Thanks, Matt

  Read the article

• Ubuntu 12.04 intermittently fails to wake up from sleep

  - by stacksia

  When I put my Ubuntu 12.04 machine into sleep, sometimes on waking up, it fails, logs me out, and takes me back to login screen. When I log back in, it tells me some unexpected error happened, but it fails to let me report the bug. This has started to happen recently, but I don't know what triggered it. uname -a Linux [name] 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux The issue seems similar to Xorg intermittently restarts after suspend. But in my case I am not sure if it is a Xorg issue. I looked at xorg logs, but didn't notice anything indicating an error. I know I am not providing a lot of info, but I am not sure where (e.g. which log files) I should seek for more info.

  Read the article

< Previous Page | 598 599 600 601 602 603 604 605 606 607 608 609  | Next Page >