getting started - Page 603

Use Autoruns to Manually Clean an Infected PC

- by Mark Virtue

There are many anti-malware programs out there that will clean your system of nasties, but what happens if you’re not able to use such a program? Autoruns, from SysInternals (recently acquired by Microsoft), is indispensable when removing malware manually. There are a few reasons why you may need to remove viruses and spyware manually: Perhaps you can’t abide running resource-hungry and invasive anti-malware programs on your PC You might need to clean your mom’s computer (or someone else who doesn’t understand that a big flashing sign on a website that says “Your computer is infected with a virus – click HERE to remove it” is not a message that can necessarily be trusted) The malware is so aggressive that it resists all attempts to automatically remove it, or won’t even allow you to install anti-malware software Part of your geek credo is the belief that anti-spyware utilities are for wimps Autoruns is an invaluable addition to any geek’s software toolkit. It allows you to track and control all programs (and program components) that start automatically with Windows (or with Internet Explorer). Virtually all malware is designed to start automatically, so there’s a very strong chance that it can be detected and removed with the help of Autoruns. We have covered how to use Autoruns in an earlier article, which you should read if you need to first familiarize yourself with the program. Autoruns is a standalone utility that does not need to be installed on your computer. It can be simply downloaded, unzipped and run (link below). This makes is ideally suited for adding to your portable utility collection on your flash drive. When you start Autoruns for the first time on a computer, you are presented with the license agreement: After agreeing to the terms, the main Autoruns window opens, showing you the complete list of all software that will run when your computer starts, when you log in, or when you open Internet Explorer: To temporarily disable a program from launching, uncheck the box next to it’s entry. Note: This does not terminate the program if it is running at the time – it merely prevents it from starting next time. To permanently prevent a program from launching, delete the entry altogether (use the Delete key, or right-click and choose Delete from the context-menu)). Note: This does not remove the program from your computer – to remove it completely you need to uninstall the program (or otherwise delete it from your hard disk). Suspicious Software It can take a fair bit of experience (read “trial and error”) to become adept at identifying what is malware and what is not. Most of the entries presented in Autoruns are legitimate programs, even if their names are unfamiliar to you. Here are some tips to help you differentiate the malware from the legitimate software: If an entry is digitally signed by a software publisher (i.e. there’s an entry in the Publisher column) or has a “Description”, then there’s a good chance that it’s legitimate If you recognize the software’s name, then it’s usually okay. Note that occasionally malware will “impersonate” legitimate software, but adopting a name that’s identical or similar to software you’re familiar with (e.g. “AcrobatLauncher” or “PhotoshopBrowser”). Also, be aware that many malware programs adopt generic or innocuous-sounding names, such as “Diskfix” or “SearchHelper” (both mentioned below). Malware entries usually appear on the Logon tab of Autoruns (but not always!) If you open up the folder that contains the EXE or DLL file (more on this below), an examine the “last modified” date, the dates are often from the last few days (assuming that your infection is fairly recent) Malware is often located in the C:\Windows folder or the C:\Windows\System32 folder Malware often only has a generic icon (to the left of the name of the entry) If in doubt, right-click the entry and select Search Online… The list below shows two suspicious looking entries: Diskfix and SearchHelper These entries, highlighted above, are fairly typical of malware infections: They have neither descriptions nor publishers They have generic names The files are located in C:\Windows\System32 They have generic icons The filenames are random strings of characters If you look in the C:\Windows\System32 folder and locate the files, you’ll see that they are some of the most recently modified files in the folder (see below) Double-clicking on the items will take you to their corresponding registry keys: Removing the Malware Once you’ve identified the entries you believe to be suspicious, you now need to decide what you want to do with them. Your choices include: Temporarily disable the Autorun entry Permanently delete the Autorun entry Locate the running process (using Task Manager or similar) and terminating it Delete the EXE or DLL file from your disk (or at least move it to a folder where it won’t be automatically started) or all of the above, depending upon how certain you are that the program is malware. To see if your changes succeeded, you will need to reboot your machine, and check any or all of the following: Autoruns – to see if the entry has returned Task Manager (or similar) – to see if the program was started again after the reboot Check the behavior that led you to believe that your PC was infected in the first place. If it’s no longer happening, chances are that your PC is now clean Conclusion This solution isn’t for everyone and is most likely geared to advanced users. Usually using a quality Antivirus application does the trick, but if not Autoruns is a valuable tool in your Anti-Malware kit. Keep in mind that some malware is harder to remove than others. Sometimes you need several iterations of the steps above, with each iteration requiring you to look more carefully at each Autorun entry. Sometimes the instant that you remove the Autorun entry, the malware that is running replaces the entry. When this happens, we need to become more aggressive in our assassination of the malware, including terminating programs (even legitimate programs like Explorer.exe) that are infected with malware DLLs. Shortly we will be publishing an article on how to identify, locate and terminate processes that represent legitimate programs but are running infected DLLs, in order that those DLLs can be deleted from the system. Download Autoruns from SysInternals Similar Articles Productive Geek Tips Using Autoruns Tool to Track Startup Applications and Add-onsHow To Get Detailed Information About Your PCSUPERAntiSpyware Portable is the Must-Have Spyware Removal Tool You NeedQuick Tip: Windows Vista Temp Files DirectoryClear Recent Commands From the Run Dialog in Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

Read the article

SQL SERVER – Weekly Series – Memory Lane – #048

- by Pinal Dave

Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Order of Result Set of SELECT Statement on Clustered Indexed Table When ORDER BY is Not Used Above theory is true in most of the cases. However SQL Server does not use that logic when returning the resultset. SQL Server always returns the resultset which it can return fastest.In most of the cases the resultset which can be returned fastest is the resultset which is returned using clustered index. Effect of TRANSACTION on Local Variable – After ROLLBACK and After COMMIT One of the Jr. Developer asked me this question (What will be the Effect of TRANSACTION on Local Variable – After ROLLBACK and After COMMIT?) while I was rushing to an important meeting. I was getting late so I asked him to talk with his Application Tech Lead. When I came back from meeting both of them were looking for me. They said they are confused. I quickly wrote down following example for them. 2008 SQL SERVER – Guidelines and Coding Standards Complete List Download Coding standards and guidelines are very important for any developer on the path of a successful career. A coding standard is a set of guidelines, rules and regulations on how to write code. Coding standards should be flexible enough or should take care of the situation where they should not prevent best practices for coding. They are basically the guidelines that one should follow for better understanding. Download Guidelines and Coding Standards complete List Download Get Answer in Float When Dividing of Two Integer Many times we have requirements of some calculations amongst different fields in Tables. One of the software developers here was trying to calculate some fields having integer values and divide it which gave incorrect results in integer where accurate results including decimals was expected. Puzzle – Computed Columns Datatype Explanation SQL Server automatically does a cast to the data type having the highest precedence. So the result of INT and INT will be INT, but INT and FLOAT will be FLOAT because FLOAT has a higher precedence. If you want a different data type, you need to do an EXPLICIT cast. Renaming SP is Not Good Idea – Renaming Stored Procedure Does Not Update sys.procedures I have written many articles about renaming a tables, columns and procedures SQL SERVER – How to Rename a Column Name or Table Name, here I found something interesting about renaming the stored procedures and felt like sharing it with you all. The interesting fact is that when we rename a stored procedure using SP_Rename command, the Stored Procedure is successfully renamed. But when we try to test the procedure using sp_helptext, the procedure will be having the old name instead of new names. 2009 Insert Values of Stored Procedure in Table – Use Table Valued Function It is clear from the result set that , where I have converted stored procedure logic into the table valued function, is much better in terms of logic as it saves a large number of operations. However, this option should be used carefully. The performance of the stored procedure is “usually” better than that of functions. Interesting Observation – Index on Index View Used in Similar Query Recently, I was working on an optimization project for one of the largest organizations. While working on one of the queries, we came across a very interesting observation. We found that there was a query on the base table and when the query was run, it used the index, which did not exist in the base table. On careful examination, we found that the query was using the index that was on another view. This was very interesting as I have personally never experienced a scenario like this. In simple words, “Query on the base table can use the index created on the indexed view of the same base table.” Interesting Observation – Execution Plan and Results of Aggregate Concatenation Queries Working with SQL Server has never seemed to be monotonous – no matter how long one has worked with it. Quite often, I come across some excellent comments that I feel like acknowledging them as blog posts. Recently, I wrote an article on SQL SERVER – Execution Plan and Results of Aggregate Concatenation Queries Depend Upon Expression Location, which is well received in the community. 2010 I encourage all of you to go through complete series and write your own on the subject. If you write an article and send it to me, I will publish it on this blog with due credit to you. If you write on your own blog, I will update this blog post pointing to your blog post. SQL SERVER – ORDER BY Does Not Work – Limitation of the View 1 SQL SERVER – Adding Column is Expensive by Joining Table Outside View – Limitation of the View 2 SQL SERVER – Index Created on View not Used Often – Limitation of the View 3 SQL SERVER – SELECT * and Adding Column Issue in View – Limitation of the View 4 SQL SERVER – COUNT(*) Not Allowed but COUNT_BIG(*) Allowed – Limitation of the View 5 SQL SERVER – UNION Not Allowed but OR Allowed in Index View – Limitation of the View 6 SQL SERVER – Cross Database Queries Not Allowed in Indexed View – Limitation of the View 7 SQL SERVER – Outer Join Not Allowed in Indexed Views – Limitation of the View 8 SQL SERVER – SELF JOIN Not Allowed in Indexed View – Limitation of the View 9 SQL SERVER – Keywords View Definition Must Not Contain for Indexed View – Limitation of the View 10 SQL SERVER – View Over the View Not Possible with Index View – Limitations of the View 11 2011 Startup Parameters Easy to Configure If you are a regular reader of this blog, you must be aware that I have written about SQL Server Denali recently. Here is the quickest way to reach into the screen where we can change the startup parameters. Go to SQL Server Configuration Manager >> SQL Server Services >> Right Click on the Server >> Properties >> Startup Parameters 2012 Validating Unique Columnname Across Whole Database I sometimes come across very strange requirements and often I do not receive a proper explanation of the same. Here is the one of those examples. For example “Our business requirement is when we add new column we want it unique across current database.” Read the solution to this strange request in this blog post. Excel Losing Decimal Values When Value Pasted from SSMS ResultSet It is very common when users are coping the resultset to Excel, the floating point or decimals are missed. The solution is very much simple and it requires a small adjustment in the Excel. By default Excel is very smart and when it detects the value which is getting pasted is numeric it changes the column format to accommodate that. Basic Calculation and PEMDAS Order of Operation Read this interesting blog post for fantastic conversation about the subject. Copy Column Headers from Resultset – SQL in Sixty Seconds #027 – Video http://www.youtube.com/watch?v=x_-3tLqTRv0 Delete From Multiple Table – Update Multiple Table in Single Statement There are two questions which I get every single day multiple times. In my gmail, I have created standard canned reply for them. Let us see the questions here. I want to delete from multiple table in a single statement how will I do it? I want to update multiple table in a single statement how will I do it? Read the answer in the blog post. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

SQL SERVER – Core Concepts – Elasticity, Scalability and ACID Properties – Exploring NuoDB an Elastically Scalable Database System

- by pinaldave

I have been recently exploring Elasticity and Scalability attributes of databases. You can see that in my earlier blog posts about NuoDB where I wanted to look at Elasticity and Scalability concepts. The concepts are very interesting, and intriguing as well. I have discussed these concepts with my friend Joyti M and together we have come up with this interesting read. The goal of this article is to answer following simple questions What is Elasticity? What is Scalability? How ACID properties vary from NOSQL Concepts? What are the prevailing problems in the current database system architectures? Why is NuoDB an innovative and welcome change in database paradigm? Elasticity This word’s original form is used in many different ways and honestly it does do a decent job in holding things together over the years as a person grows and contracts. Within the tech world, and specifically related to software systems (database, application servers), it has come to mean a few things - allow stretching of resources without reaching the breaking point (on demand). What are resources in this context? Resources are the usual suspects – RAM/CPU/IO/Bandwidth in the form of a container (a process or bunch of processes combined as modules). When it is about increasing resources the simplest idea which comes to mind is the addition of another container. Another container means adding a brand new physical node. When it is about adding a new node there are two questions which comes to mind. 1) Can we add another node to our software system? 2) If yes, does adding new node cause downtime for the system? Let us assume we have added new node, let us see what the new needs of the system are when a new node is added. Balancing incoming requests to multiple nodes Synchronization of a shared state across multiple nodes Identification of “downstate” and resolution action to bring it to “upstate” Well, adding a new node has its advantages as well. Here are few of the positive points Throughput can increase nearly horizontally across the node throughout the system Response times of application will increase as in-between layer interactions will be improved Now, Let us put the above concepts in the perspective of a Database. When we mention the term “running out of resources” or “application is bound to resources” the resources can be CPU, Memory or Bandwidth. The regular approach to “gain scalability” in the database is to look around for bottlenecks and increase the bottlenecked resource. When we have memory as a bottleneck we look at the data buffers, locks, query plans or indexes. After a point even this is not enough as there needs to be an efficient way of managing such large workload on a “single machine” across memory and CPU bound (right kind of scheduling) workload. We next move on to either read/write separation of the workload or functionality-based sharing so that we still have control of the individual. But this requires lots of planning and change in client systems in terms of knowing where to go/update/read and for reporting applications to “aggregate the data” in an intelligent way. What we ideally need is an intelligent layer which allows us to do these things without us getting into managing, monitoring and distributing the workload. Scalability In the context of database/applications, scalability means three main things Ability to handle normal loads without pressure E.g. X users at the Y utilization of resources (CPU, Memory, Bandwidth) on the Z kind of hardware (4 processor, 32 GB machine with 15000 RPM SATA drives and 1 GHz Network switch) with T throughput Ability to scale up to expected peak load which is greater than normal load with acceptable response times Ability to provide acceptable response times across the system E.g. Response time in S milliseconds (or agreed upon unit of measure) – 90% of the time The Issue – Need of Scale In normal cases one can plan for the load testing to test out normal, peak, and stress scenarios to ensure specific hardware meets the needs. With help from Hardware and Software partners and best practices, bottlenecks can be identified and requisite resources added to the system. Unfortunately this vertical scale is expensive and difficult to achieve and most of the operational people need the ability to scale horizontally. This helps in getting better throughput as there are physical limits in terms of adding resources (Memory, CPU, Bandwidth and Storage) indefinitely. Today we have different options to achieve scalability: Read & Write Separation The idea here is to do actual writes to one store and configure slaves receiving the latest data with acceptable delays. Slaves can be used for balancing out reads. We can also explore functional separation or sharing as well. We can separate data operations by a specific identifier (e.g. region, year, month) and consolidate it for reporting purposes. For functional separation the major disadvantage is when schema changes or workload pattern changes. As the requirement grows one still needs to deal with scale need in manual ways by providing an abstraction in the middle tier code. Using NOSQL solutions The idea is to flatten out the structures in general to keep all values which are retrieved together at the same store and provide flexible schema. The issue with the stores is that they are compromising on mostly consistency (no ACID guarantees) and one has to use NON-SQL dialect to work with the store. The other major issue is about education with NOSQL solutions. Would one really want to make these compromises on the ability to connect and retrieve in simple SQL manner and learn other skill sets? Or for that matter give up on ACID guarantee and start dealing with consistency issues? Hybrid Deployment – Mac, Linux, Cloud, and Windows One of the challenges today that we see across On-premise vs Cloud infrastructure is a difference in abilities. Take for example SQL Azure – it is wonderful in its concepts of throttling (as it is shared deployment) of resources and ability to scale using federation. However, the same abilities are not available on premise. This is not a mistake, mind you – but a compromise of the sweet spot of workloads, customer requirements and operational SLAs which can be supported by the team. In today’s world it is imperative that databases are available across operating systems – which are a commodity and used by developers of all hues. An Ideal Database Ability List A system which allows a linear scale of the system (increase in throughput with reasonable response time) with the addition of resources A system which does not compromise on the ACID guarantees and require developers to learn new paradigms A system which does not force fit a new way interacting with database by learning Non-SQL dialect A system which does not force fit its mechanisms for providing availability across its various modules. Well NuoDB is the first database which has all of the above abilities and much more. In future articles I will cover my hands-on experience with it. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

Read the article

Emit Knowledge - social network for knowledge sharing

- by hajan

Emit Knowledge, as the words refer - it's a social network for emitting / sharing knowledge from users by users. Those who can benefit the most out of this network is perhaps all of YOU who have something to share with others and contribute to the knowledge world. I've been closely communicating with the core team of this very, very interesting, brand new social network (with specific purpose!) about the concept, idea and the vision they have for their product and I can say with a lot of confidence that this network has real potential to become something from which we will all benefit. I won't speak much about that and would prefer to give you link and try it yourself - http://www.emitknowledge.com Mainly, through the past few months I've been testing this network and it is getting improved all the time. The user experience is great, you can easily find out what you need and it follows some known patterns that are common for all social networks. They have some real good ideas and plans that are already under development for the next updates of their product. You can do micro blogging or you can do regular normal blogging… it’s up to you, and the way it works, it is seamless. Here is a short Question and Answers (QA) interview I made with the lead of the team, Marijan Nikolovski: 1. Can you please explain us briefly, what is Emit Knowledge? Emit Knowledge is a brand new knowledge based social network, delivering quality content from users to users. We believe that people’s knowledge, experience and professional thoughts compose quality content, worth sharing among millions around the world. Therefore, we created the platform that matches people’s need to share and gain knowledge in the most suitable and comfortable way. Easy to work with, Emit Knowledge lets you to smoothly craft and emit knowledge around the globe. 2. How 'old' is Emit Knowledge? In hamster’s years we are almost five years old start-up :). Just kidding. We’ve released our public beta about three months ago. Our official release date is 27 of June 2012. 3. How did you come up with this idea? Everything started from a simple idea to solve a complex problem. We’ve seen that the social web has become polluted with data and is on the right track to lose its base principles – socialization and common cause. That was our start point. We’ve gathered the team, drew some sketches and started to mind map the idea. After several idea refactoring’s Emit Knowledge was born. 4. Is there any competition out there in the market? Currently we don't have any competitors that share the same cause. What makes our platform different is the ideology that our product promotes and the functionalities that our platform offers for easy socialization based on interests and knowledge sharing. 5. What are the main technologies used to build Emit Knowledge? Emit Knowledge was built on a heterogeneous pallet of technologies. Currently, we have four of separation: UI – Built on ASP.NET MVC3 and Knockout.js; Messaging infrastructure – Build on top of RabbitMQ; Background services – Our in-house solution for job distribution, orchestration and processing; Data storage – Build on top of MongoDB; What are the main reasons you've chosen ASP.NET MVC? Since all of our team members are .NET engineers, the decision was very natural. ASP.NET MVC is the only Microsoft web stack that sticks to the HTTP behavioral standards. It is easy to work with, have a tiny learning curve and everyone who is familiar with the HTTP will understand its architecture and convention without any difficulties. 6. What are the main reasons for choosing ASP.NET MVC? Since all of our team members are .NET engineers, the decision was very natural. ASP.NET MVC is the only Microsoft web stack that sticks to the HTTP behavioral standards. It is easy to work with, have a tiny learning curve and everyone who is familiar with the HTTP will understand its architecture and convention without any difficulties. 7. Did you use some of the latest Microsoft technologies? If yes, which ones? Yes, we like to rock the cutting edge tech house. Currently we are using Microsoft’s latest technologies like ASP.NET MVC, Web API (work in progress) and the best for the last; we are utilizing Windows Azure IaaS to the bone. 8. Can you please tell us shortly, what would be the benefit of regular bloggers in other blogging platforms to join Emit Knowledge? Well, unless you are some of the smoking ace gurus whose blogs are followed by a large number of users, our platform offers knowledge based segregated community equipped with tools that will enable both current and future users to expand their relations and to self-promote in the community based on their activity and knowledge sharing. 10. I see you are working very intensively and there is already integration with some third-party services to make the process of sharing and emitting knowledge easier, which services did you integrate until now and what do you plan do to next? We have “reemit” functionality for internal sharing and we also support external services like: Twitter; LinkedIn; Facebook; For the regular bloggers we have an extra cream, Windows Live Writer support for easy blog posts emitting. 11. What should we expect next? Currently, we are working on a new fancy community feature. This means that we are going to support user groups to be formed. So for all existing communities and user groups out there, wait us a little bit, we are coming for rescue :). One of the top next features they are developing is the Community Feature. It means, if you have your own User Group, Community Group or any other Group on which you and your users are mostly blogging or sharing (emitting) knowledge in various ways, Emit Knowledge as a platform will help you have everything you need to promote your group, make new followers and host all the necessary stuff that you have had need of. I would invite you to try the network and start sharing knowledge in a way that will help you gather new followers and spread your knowledge faster, easier and in a more efficient way! Let’s Emit Knowledge!

Read the article

You Say You Want a (Customer Experience) Revolution

- by Christie Flanagan

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} rev-o-lu-tion [rev-uh-loo-shuhn] noun 1. a sudden, radical or complete change 2. fundamental change in the way of thinking about or visualizing something; a change of paradigm 3. a changeover in use or preference especially in technology <the computer revolution> Lately, I've been hearing an awful lot about the customer experience revolution. Tonight Oracle will be hosting The Experience Revolution, an evening of exploration and networking with customer experience executives in New York City where Oracle President Mark Hurd will introduce Oracle Customer Experience, a cross-stack suite of customer experience products that includes Oracle WebCenter and a number of other Oracle technologies. Then on Tuesday and Wednesday, the Forrester Customer Experience Forum East also kicks off in New York City where they'll examine how businesses can "reap the full business benefits of the customer experience revolution." So, are we in the midst of a customer experience revolution? As a consumer, I can answer that question with a definitive “yes.” When I bought my very first car, I had a lot of questions. How do I know if I’m paying a fair price? How do I know if this dealer is honest? Why do I have to sit through these good cop, bad cop shenanigans between sales and sales management at the dealership? Why do I feel like I’m doing these people a favor by giving them my business? In the end the whole experience left me feeling deeply unsatisfied. I didn’t feel that I held all that much power over the experience and the only real negotiating trick I had was to walk out, which I did, many times before actually making a purchase. Fast forward to a year ago and I found myself back in the market for a new car. The very first car that I bought had finally kicked the bucket after many years, many repair bills, and much wear and tear. Man, I had loved that car. It was time to move on, but I had a knot in my stomach when I reflected back on my last car purchase experience and dreaded the thought of going through that again. Could that have been the reason why I drove my old car for so long? But as I started the process of researching new cars, I started to feel really confident. I had a wealth of online information that helped me in my search. I went to Edmunds and plugged in some information on my preferences and left with a short list of vehicles. After an afternoon spent test driving the cars my short list, I had determined my favorite – it was a model I didn’t even know about until my research on Edmunds! But I didn’t want to go back to the dealership where I test drove it. They were clearly old school and wanted me to buy the way that they wanted to sell. No thanks! After that I went back online. I figured out exactly what people had paid for this car in my area. I found out what kind of discount others were able to negotiate from an online community forum dedicated to the make and model. I found out how the sales people were being incentivized by the manufacturer that month. I learned which dealers had the best ratings and reviews. This was actually getting exciting. I was feeling really empowered. My next step was to request online quotes from the some of the highest rated dealers but I already knew exactly how much I was going to pay. This was really a test for the dealers. My new mantra was “let he who delivers the best customer experience win.” An inside sales rep from one dealer responded to my quote request within a couple of hours. I told him I had already decided on the make and model and it was just a matter of figuring out who I would buy it from. I also told them that I was really busy and wouldn’t set foot in the dealership unless we had come to terms beforehand. Lastly, I let him know that I’d prefer to work out the details via email. He promised to get back to me shortly with a detailed quote. Over the next few days I received calls from other dealers. One asked me a host of questions that I had already answered in their lengthy online form. Another blamed their website performance issues for their delay in responding to my request. But by then it didn’t really matter because I’d already bought the car days before from the dealer who responded to me first and who was willing to adjust their sales process to accommodate my buying one. So, yes, I really do believe we are in the midst of a customer experience revolution. And every revolution leaves some victorious and other vanquished. Which side do you want to be on when it comes to the customer experience revolution?

Read the article

Integrate Google Wave With Your Windows Workflow

- by Matthew Guay

Have you given Google Wave a try, only to find it difficult to keep up with? Here’s how you can integrate Google Wave with your desktop and workflow with some free and simple apps. Google Wave is an online web app, and unlike many Google services, it’s not easily integrated with standard desktop applications. Instead, you’ll have to keep it open in a browser tab, and since it is one of the most intensive HTML5 webapps available today, you may notice slowdowns in many popular browsers. Plus, it can be hard to stay on top of your Wave conversations and collaborations by just switching back and forth between the website and whatever else you’re working on. Here we’ll look at some tools that can help you integrate Google Wave with your workflow, and make it feel more native in Windows. Use Google Wave Directly in Windows What’s one of the best ways to make a web app feel like a native application? By making it into a native application, of course! Waver is a free Air powered app that can make the mobile version of Google Wave feel at home on your Windows, Mac, or Linux desktop. We found it to be a quick and easy way to keep on top of our waves and collaborate with our friends. To get started with Waver, open their homepage on the Adobe Air Marketplace (link below) and click Download From Publisher. Waver is powered by Adobe Air, so if you don’t have Adobe Air installed, you’ll need to first download and install it. After clicking the link above, Adobe Air will open a prompt asking what you wish to do with the file. Click Open, and then install as normal. Once the installation is finished, enter your Google Account info in the window. After a few moments, you’ll see your Wave account in miniature, running directly in Waver. Click a Wave to view it, or click New wave to start a new Wave message. Unfortunately, in our tests the search box didn’t seem to work, but everything else worked fine. Google Wave works great in Waver, though all of the Wave features are not available since it is running the mobile version of Wave. You can still view content from plugins, including YouTube videos, directly in Waver. Get Wave Notifications From Your Windows Taskbar Most popular email and Twitter clients give you notifications from your system tray when new messages come in. And with Google Wave Notifier, you can now get the same alerts when you receive a new Wave message. Head over to the Google Wave Notifier site (link below), and click the download link to get started. Make sure to download the latest Binary zip, as this one will contain the Windows program rather than the source code. Unzip the folder, and then run GoogleWaveNotifier.exe. On first run, you can enter your Google Account information. Notice that this is not a standard account login window; you’ll need to enter your email address in the Username field, and then your password below it. You can also change other settings from this dialog, including update frequency and whether or not to run at startup. Click the value, and then select the setting you want from the dropdown menu. Now, you’ll have a new Wave icon in your system tray. When it detects new Waves or unread updates, it will display a popup notification with details about the unread Waves. Additionally, the icon will change to show the number of unread Waves. Click the popup to open Wave in your browser. Or, if you have Waver installed, simply open the Waver window to view your latest Waves. If you ever need to change settings again in the future, right-click the icon and select Settings, and then edit as above. Get Wave Notifications in Your Email Most of us have Outlook or Gmail open all day, and seldom leave the house without a Smartphone with push email. And thanks to a new Wave feature, you can still keep up with your Waves without having to change your workflow. To activate email notifications from Google Wave, login to your Wave account, click the arrow beside your Inbox, and select Notifications. Select how quickly you want to receive notifications, and choose which email address you wish to receive the notifications. Click Save when you’re finished. Now you’ll receive an email with information about new and updated Waves in your account. If there were only small changes, you may get enough info directly in the email; otherwise, you can click the link and open that Wave in your browser. Conclusion Google Wave has great potential as a collaboration and communications platform, but by default it can be hard to keep up with what’s going on in your Waves. These apps for Windows help you integrate Wave with your workflow, and can keep you from constantly logging in and checking for new Waves. And since Google Wave registration is now open for everyone, it’s a great time to give it a try and see how it works for yourself. Links Signup for Google Wave (Google Account required) Download Waver from the Adobe Air Marketplace Download Google Wave Notifier Similar Articles Productive Geek Tips We Have 20 Google Wave Invites. Want One?Tired of Waiting for Google Wave? Try ShareFlow NowIntegrate Google Docs with Outlook the Easy WayAwesome Desktop Wallpapers: The Windows 7 EditionWeek in Geek: The Stupid Geek Tricks to Hide Extra Windows Edition TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Default Programs Editor – One great tool for Setting Defaults Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free Windows Media Player Plus! – Cool WMP Enhancer

Read the article

Massive Silverlight Giveaway! DevExpress , Syncfusion, Crypto Obfuscator and SL Spy!

- by mbcrump

Oh my, have we grown! Maybe I should change the name to Multiple Silverlight Giveaways. So far, my Silverlight giveaways have been such a success that I’m going to be able to give away more than one Silverlight product every month. Last month, we gave away 3 great products. 1) ComponentOne Silverlight Controls 2) ComponentOne XAP Optimizer (with obfuscation) and 3) Silverlight Spy. This month, we will give away 4 great Silverlight products and have 4 different winners. This way the Silverlight community can grow with more than just one person winning all the prizes. This month we will be giving away: DevExpress Silverlight Controls – Over 50+ Silverlight Controls Syncfusion User Interface Edition - Create stunning line of business silverlight applications with a wide range of components including a high performance grid, docking manager, chart, gauge, scheduler and much more. Crypto Obfuscator – Works for all .NET including Silverlight/Windows Phone 7. Silverlight Spy – provides a license EVERY month for this giveaway. ----------------------------------------------------------------------------------------------------------------------------------------------------------- Win a FREE developer’s license of one of the products listed above! 4 winners will be announced on April 1st, 2011! To be entered into the contest do the following things: Subscribe to my feed. – Use Google Reader, email or whatever is best for you. Leave a comment below with a valid email account (I WILL NOT share this info with anyone.) Retweet the following : I just entered to win free #Silverlight controls from @mbcrump . Register here: http://mcrump.me/fTSmB8 ! Don’t change the URL because this will allow me to track the users that Tweet this page. Don’t forget to visit each of the vendors sites because they made this possible. MichaelCrump.Net provides Silverlight Giveaways every month. You can also see the latest giveaway by bookmarking http://giveaways.michaelcrump.net . ---------------------------------------------------------------------------------------------------------------------------------------------------------- DevExpress Silverlight Controls Let’s take a quick look at some of the software that is provided in this giveaway. Before we get started with the Silverlight Controls, here is a couple of links to bookmark for the DevExpress Silverlight Controls: The Live Demos of the Silverlight Controls is located here. Great Video Tutorials of the Silverlight Controls are here. One thing that I liked about the DevExpress is how easy it was to find demos of each control. After you install the controls the following Program Group appears complete with “demos” that include full-source. So, the first question that you may ask is, “What is included?” Here is the official list below. I wanted to show several of the controls that I think developers will use the most. The Book – Very rich animation between switching pages. Very easy to add your own images and custom text. The Menu – This is another control that just looked great. You can easily add images to the menu items with a few lines of XAML. The Window / Dialog Box – You can use this control to make a very beautiful “Wizard” to help your users navigate between pages. This is useful in setup or installation. Calculator – This would be useful for any type of Banking app. Also a first that I’ve seen from a 3rd party Control company. DatePicker – This controls feels a lot smoother than the one provided by Microsoft. It also provides the ability to “Clear” the selection. Overall the DevExpress Silverlight Controls feature a lot of quality controls that you should check out. You can go ahead and download a trial version of it right now by clicking here. If you win the contest you can simply enter your registration key and continue using the product without reinstalling. Syncfusion User Interface Edition Before we get started with the Syncfusion User Interface Edition, here is a couple of links to bookmark. The Live Demos can be found here. You can download a demo of it now at http://www.syncfusion.com/downloads/evalstart. After you install the Syncfusion, you can view the dashboard to run locally installed samples. You may also download the documentation to your local machine if needed. Since the name of the package is “User Interface Edition”, I decided to share several samples that struck me as “awesome”. Dashboard Gauges – I was very impressed with the various gauges they have included. The digital clock also looks very impressive. Diagram – The diagrams are also very easy to build. In the sample project below you can drag/drop the shapes onto the content pane. More complex lines like the Bezier lines are also easy to create using Syncfusion. Scheduling – Another strong component was the Scheduling with built-in support for Themes. Tools – If all of that wasn’t enough, it also comes with a nice pack of essential tools. Syncfusion has a nice variety of Silverlight Controls that you should check out. You can go ahead and download a trial version of it right now by clicking here. Crypto Obfuscator The following feature set is what is important to me in an Obfuscator since I am a Silverlight/WP7 Developer: And thankfully this is what you get in Crypto Obfuscator. You can download a trial version right now if you want to go ahead and play with it. Let’s spend a few moments taking a look at the application. After you have installed Crypto Obfuscator you will see the following screen: After you click on Assemblies you have the option to add your .XAP file in: I went ahead and loaded my .xap file from a Silverlight Application. At this point, you can simply save your project and hit “Obfuscate” and your done. You don’t have to mess with any of the other settings if you don’t want too. Of course, you can change the settings and add obfuscation rules, watermarks and signing if you wish. After Obfuscation, it looks like this in .NET Reflector: I was trying to browse through methods and it actually crashed Reflector. This confirms the level of protection the obfuscator is providing. If this were a commercial application that my team built, I would have a huge smile on my face right now. Crypto Obfuscator is a great product and I hope you will spend the time learning more about it. Silverlight Spy Silverlight Spy is a runtime inspector tool that will tell you pretty much everything that is going on with the application. Basically, you give it a URL that contains a Silverlight application and you can explore the element tree, events, xaml and so much more. This has already been reviewed on MichaelCrump.net. _________________________________________________________________________________________ Thanks for reading and don’t forget to leave a comment below in order to win one of the four prizes available! Subscribe to my feed

Read the article

Get Information to Your Blog with Microsoft Broadcaster

- by Matthew Guay

Do you often have people ask you for advice about technology, or do you write tech-focused blog or newsletter? Here’s how you can get information to share with your readers about Microsoft technology with Microsoft Broadcaster. Microsoft Broadcaster is a new service from Microsoft to help publishers, bloggers, developers, and other IT professionals find relevant information and resources from Microsoft. You can use it to help discover things to write about, or simply discover new information about the technology you use. Broadcaster will also notify you when new resources are available about the topics that interest you. Let’s look at how you could use this to expand your blog and help your users. Getting Started Head over to the Microsoft Broadcaster site (link below), and click Join to get started. Sign in with your Windows Live ID, or create a new account if you don’t already have one. Near the bottom of the page, add information about your blog, newsletter, or group that you want to share Broadcaster information with. Click Add when you’re done entering information. You can enter as many sites or groups as you wish. When you’ve entered all of your information, click the Apply button at the bottom of the page. Broadcaster will then let you know your information has been submitted, but you’ll need to wait several days to see if you are approved or not. Our application was approved about 2 days after applying, though this may vary. When you’re approved, you’ll receive an email letting you know. Return to the Broadcaster website (link below), but this time, click Sign in. Accept the terms of use by clicking I Accept at the bottom of the page. Confirm that your information entered previously is correct, and then click Configure my keywords at the bottom of the page. Now you can pick the topics you want to stay informed about. Type keywords in the textbox, and it will bring up relevant topics with IntelliSense. Here we’ve added several topics to keep up with. Next select the Microsoft Products you want to keep track of. If the product you want to keep track of is not listed, make sure to list it in the keywords section as above. Finally, select the types of content you wish to see, including articles, eBooks, webcasts, and more. Finally, when everything’s entered, click Configure My Alerts at the bottom of the page. Broadcaster can automatically email you when new content is found. If you would like this, click Subscribe. Otherwise, simply click Access Dashboard to go ahead and find your personalized content. If you choose to receive emails of new content, you’ll have to configure it with Windows Live Alerts. Click Continue to set this up. Select if you want to receive Messenger alerts, emails, and/or text messages when new content is available. Click Save when you’re finished. Finally, select how often you want to be notified, and then click Access Dashboard to view the content currently available. Finding Content For Your Blog, Site, or Group Now you can find content specified for your interests from the dashboard. To access the dashboard in the future, simply go to the Broadcaster site and click Sign In. Here you can see available content, and can search for different topics or customize the topics shown. You’ll see snippets of information from various Microsoft videos, articles, whitepapers, eBooks, and more, depending on your settings. Click the link at the top of the snippet to view the content, or right-click and copy the link to use in emails or on social networks like Twitter. If you’d like to add this snippet to your website or blog, click the Download content link at the bottom. Now you can preview what the snippet will look like on your site, and change the width or height to fit your site. You can view and edit the source code of the snippet from the box at the bottom, and then copy it to use on your site. Copy the code, and paste it in the HTML of a blog post, email, webpage, or anywhere else you wish to share it. Here we’re pasting it into the HTML editor in Windows Live Writer so we can post it to a blog. After adding a title and opening paragraph, we have a nice blog post that only took a few minutes to put together but should still be useful for our readers. You can check out the blog post we created at the link below. Readers can click on the links, which will direct them to the content on Microsoft’s websites. Conclusion If you frequently need to find educational and informative content about Microsoft products and services, Broadcaster can be a great service to keep you up to date. The service worked quite good in our tests, and generally found relevant content to our keywords. We had difficulty embedding links to eBooks that were listed by Broadcaster, but everything else worked for us. Now you can always have high quality content to help your customers, coworkers, friends, and more, and you just might find something that will help you, too! Link Microsoft Broadcaster (registration required) Example Post at Techinch.com with Content from Microsoft Broadcaster Similar Articles Productive Geek Tips Create An Electronic Business Card In Outlook 2007Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPAnnouncing the How-To Geek BlogsNew Vista Syntax for Opening Control Panel Items from the Command-lineHow To Create and Publish Blog Posts in Word 2010 & 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Fix Common Inkjet Printer Errors Dual Boot Ubuntu and Windows 7 What is HTML5? Default Programs Editor – One great tool for Setting Defaults Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com

Read the article

Get Application Title from Windows Phone

- by psheriff

In a Windows Phone application that I am currently developing I needed to be able to retrieve the Application Title of the phone application. You can set the Deployment Title in the Properties of your Windows Phone Application, however getting to this value programmatically can be a little tricky. This article assumes that you have Visual Studio 2010 and the Windows Phone tools installed along with it. The Windows Phone tools must be downloaded separately and installed with Visual Studio2010. You may also download the free Visual Studio2010 Express for Windows Phone developer environment. The WMAppManifest.xml File First off you need to understand that when you set the Deployment Title in the Properties windows of your Windows Phone application, this title actually gets stored into an XML file located under the \Properties folder of your application. This XML file is named WMAppManifest.xml. A portion of this file is shown in the following listing. <?xml version="1.0" encoding="utf-8"?><Deployment http://schemas.microsoft.com/windowsphone/2009/deployment"http://schemas.microsoft.com/windowsphone/2009/deployment" AppPlatformVersion="7.0"> <App xmlns="" ProductID="{71d20842-9acc-4f2f-b0e0-8ef79842ea53}" Title="Mobile Time Track" RuntimeType="Silverlight" Version="1.0.0.0" Genre="apps.normal" Author="PDSA, Inc." Description="Mobile Time Track" Publisher="PDSA, Inc."> ... ... </App></Deployment> Notice the “Title” attribute in the <App> element in the above XML document. This is the value that gets set when you modify the Deployment Title in your Properties Window of your Phone project. The only value you can set from the Properties Window is the Title. All of the other attributes you see here must be set by going into the XML file and modifying them directly. Note that this information duplicates some of the information that you can also set from the Assembly Information… button in the Properties Window. Why Microsoft did not just use that information, I don’t know. Reading Attributes from WMAppManifest I searched all over the namespaces and classes within the Windows Phone DLLs and could not find a way to read the attributes within the <App> element. Thus, I had to resort to good old fashioned XML processing. First off I created a WinPhoneCommon class and added two static methods as shown in the snippet below: public class WinPhoneCommon{ /// <summary> /// Returns the Application Title /// from the WMAppManifest.xml file /// </summary> /// <returns>The application title</returns> public static string GetApplicationTitle() { return GetWinPhoneAttribute("Title"); } /// <summary> /// Returns the Application Description /// from the WMAppManifest.xml file /// </summary> /// <returns>The application description</returns> public static string GetApplicationDescription() { return GetWinPhoneAttribute("Description"); } ... GetWinPhoneAttribute method here ...} In your Windows Phone application you can now simply call WinPhoneCommon.GetApplicationTitle() or WinPhone.GetApplicationDescription() to retrieve the Title or Description properties from the WMAppManifest.xml file respectively. You notice that each of these methods makes a call to the GetWinPhoneAttribute method. This method is shown in the following code snippet: /// <summary>/// Gets an attribute from the Windows Phone WMAppManifest.xml file/// To use this method, add a reference to the System.Xml.Linq DLL/// </summary>/// <param name="attributeName">The attribute to read</param>/// <returns>The Attribute's Value</returns>private static string GetWinPhoneAttribute(string attributeName){ string ret = string.Empty; try { XElement xe = XElement.Load("WMAppManifest.xml"); var attr = (from manifest in xe.Descendants("App") select manifest).SingleOrDefault(); if (attr != null) ret = attr.Attribute(attributeName).Value; } catch { // Ignore errors in case this method is called // from design time in VS.NET } return ret;} I love using the new LINQ to XML classes contained in the System.Xml.Linq.dll. When I did a Bing search the only samples I found for reading attribute information from WMAppManifest.xml used either an XmlReader or XmlReaderSettings objects. These are fine and work, but involve a little extra code. Instead of using these, I added a reference to the System.Xml.Linq.dll, then added two using statements to the top of the WinPhoneCommon class: using System.Linq;using System.Xml.Linq; Now, with just a few lines of LINQ to XML code you can read to the App element and extract the appropriate attribute that you pass into the GetWinPhoneAttribute method. Notice that I added a little bit of exception handling code in this method. I ignore the exception in case you call this method in the Loaded event of a user control. In design-time you cannot access the WMAppManifest file and thus an exception would be thrown. Summary In this article you learned how to retrieve the attributes from the WMAppManifest.xml file. I use this technique to grab information that I would otherwise have to hard-code in my application. Getting the Title or Description for your Windows Phone application is easy with just a little bit of LINQ to XML code. NOTE: You can download the complete sample code at my website. http://www.pdsa.com/downloads. Choose Tips & Tricks, then "Get Application Title from Windows Phone" from the drop-down. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free video on Silverlight entitled Silverlight XAML for the Complete Novice - Part 1.

Read the article

SPARC T5-4 LDoms for RAC and WebLogic Clusters

- by Jeff Taylor-Oracle

I wanted to use two Oracle SPARC T5-4 servers to simultaneously host both Oracle RAC and a WebLogic Server Cluster. I chose to use Oracle VM Server for SPARC to create a cluster like this: There are plenty of trade offs and decisions that need to be made, for example: Rather than configuring the system by hand, you might want to use an Oracle SuperCluster T5-8 My configuration is similar to jsavit's: Availability Best Practices - Example configuring a T5-8 but I chose to ignore some of the advice. Maybe I should have included an alternate service domain, but I decided that I already had enough redundancy Both Oracle SPARC T5-4 servers were to be configured like this: Cntl 0.25 4 64GB App LDom 2.75 CPU's 44 cores 704 GB DB LDom One CPU 16 cores 256 GB The systems started with everything in the primary domain: # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL NORM UPTIME primary active -n-c-- UART 512 1023G 0.0% 0.0% 11m # ldm list-spconfig factory-default [current] primary # ldm list -o core,memory,physio NAME primary CORE CID CPUSET 0 (0, 1, 2, 3, 4, 5, 6, 7) 1 (8, 9, 10, 11, 12, 13, 14, 15) 2 (16, 17, 18, 19, 20, 21, 22, 23) -- SNIP 62 (496, 497, 498, 499, 500, 501, 502, 503) 63 (504, 505, 506, 507, 508, 509, 510, 511) MEMORY RA PA SIZE 0x30000000 0x30000000 255G 0x80000000000 0x80000000000 256G 0x100000000000 0x100000000000 256G 0x180000000000 0x180000000000 256G # Give this memory block to the DB LDom IO DEVICE PSEUDONYM OPTIONS pci@300 pci_0 pci@340 pci_1 pci@380 pci_2 pci@3c0 pci_3 pci@400 pci_4 pci@440 pci_5 pci@480 pci_6 pci@4c0 pci_7 pci@300/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE1 pci@300/pci@1/pci@0/pci@c /SYS/RCSA/PCIE2 pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0 pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0 pci@340/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE3 pci@340/pci@1/pci@0/pci@c /SYS/RCSA/PCIE4 pci@380/pci@1/pci@0/pci@a /SYS/RCSA/PCIE9 pci@380/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE10 pci@3c0/pci@1/pci@0/pci@e /SYS/RCSA/PCIE11 pci@3c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE12 pci@400/pci@1/pci@0/pci@e /SYS/RCSA/PCIE5 pci@400/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE6 pci@440/pci@1/pci@0/pci@e /SYS/RCSA/PCIE7 pci@440/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE8 pci@480/pci@1/pci@0/pci@a /SYS/RCSA/PCIE13 pci@480/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE14 pci@4c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE15 pci@4c0/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE16 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2 Added an additional service processor configuration: # ldm add-spconfig split # ldm list-spconfig factory-default primary split [current] And removed many of the resources from the primary domain: # ldm start-reconf primary # ldm set-core 4 primary # ldm set-memory 32G primary # ldm rm-io pci@340 primary # ldm rm-io pci@380 primary # ldm rm-io pci@3c0 primary # ldm rm-io pci@400 primary # ldm rm-io pci@440 primary # ldm rm-io pci@480 primary # ldm rm-io pci@4c0 primary # init 6 Needed to add resources to the guest domains: # ldm add-domain db # ldm set-core cid=`seq -s"," 48 63` db # ldm add-memory mblock=0x180000000000:256G db # ldm add-io pci@480 db # ldm add-io pci@4c0 db # ldm add-domain app # ldm set-core 44 app # ldm set-memory 704G app # ldm add-io pci@340 app # ldm add-io pci@380 app # ldm add-io pci@3c0 app # ldm add-io pci@400 app # ldm add-io pci@440 app Needed to set up services: # ldm add-vds primary-vds0 primary # ldm add-vcc port-range=5000-5100 primary-vcc0 primary Needed to add a virtual network port for the WebLogic application domain: # ipadm NAME CLASS/TYPE STATE UNDER ADDR lo0 loopback ok -- -- lo0/v4 static ok -- ... lo0/v6 static ok -- ... net0 ip ok -- ... net0/v4 static ok -- xxx.xxx.xxx.xxx/24 net0/v6 addrconf ok -- .... net0/v6 addrconf ok -- ... net8 ip ok -- -- net8/v4 static ok -- ... # dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE net1 Ethernet unknown 0 unknown ixgbe1 net0 Ethernet up 1000 full ixgbe0 net8 Ethernet up 10 full usbecm2 # ldm add-vsw net-dev=net0 primary-vsw0 primary # ldm add-vnet vnet1 primary-vsw0 app Needed to add a virtual disk to the WebLogic application domain: # format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0t5000CCA02505F874d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02505f874 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD0/disk 1. c0t5000CCA02506C468d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02506c468 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD1/disk 2. c0t5000CCA025067E5Cd0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca025067e5c /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD2/disk 3. c0t5000CCA02506C258d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB> /scsi_vhci/disk@g5000cca02506c258 /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD3/disk Specify disk (enter its number): ^C # ldm add-vdsdev /dev/dsk/c0t5000CCA02506C468d0s2 HDD1@primary-vds0 # ldm add-vdisk HDD1 HDD1@primary-vds0 app Add some additional spice to the pot: # ldm set-variable auto-boot\\?=false db # ldm set-variable auto-boot\\?=false app # ldm set-var boot-device=HDD1 app Bind the logical domains: # ldm bind db # ldm bind app At the end of the process, the system is set up like this: # ldm list -o core,memory,physio NAME primary CORE CID CPUSET 0 (0, 1, 2, 3, 4, 5, 6, 7) 1 (8, 9, 10, 11, 12, 13, 14, 15) 2 (16, 17, 18, 19, 20, 21, 22, 23) 3 (24, 25, 26, 27, 28, 29, 30, 31) MEMORY RA PA SIZE 0x30000000 0x30000000 32G IO DEVICE PSEUDONYM OPTIONS pci@300 pci_0 pci@300/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE1 pci@300/pci@1/pci@0/pci@c /SYS/RCSA/PCIE2 pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0 pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0 ------------------------------------------------------------------------------ NAME app CORE CID CPUSET 4 (32, 33, 34, 35, 36, 37, 38, 39) 5 (40, 41, 42, 43, 44, 45, 46, 47) 6 (48, 49, 50, 51, 52, 53, 54, 55) 7 (56, 57, 58, 59, 60, 61, 62, 63) 8 (64, 65, 66, 67, 68, 69, 70, 71) 9 (72, 73, 74, 75, 76, 77, 78, 79) 10 (80, 81, 82, 83, 84, 85, 86, 87) 11 (88, 89, 90, 91, 92, 93, 94, 95) 12 (96, 97, 98, 99, 100, 101, 102, 103) 13 (104, 105, 106, 107, 108, 109, 110, 111) 14 (112, 113, 114, 115, 116, 117, 118, 119) 15 (120, 121, 122, 123, 124, 125, 126, 127) 16 (128, 129, 130, 131, 132, 133, 134, 135) 17 (136, 137, 138, 139, 140, 141, 142, 143) 18 (144, 145, 146, 147, 148, 149, 150, 151) 19 (152, 153, 154, 155, 156, 157, 158, 159) 20 (160, 161, 162, 163, 164, 165, 166, 167) 21 (168, 169, 170, 171, 172, 173, 174, 175) 22 (176, 177, 178, 179, 180, 181, 182, 183) 23 (184, 185, 186, 187, 188, 189, 190, 191) 24 (192, 193, 194, 195, 196, 197, 198, 199) 25 (200, 201, 202, 203, 204, 205, 206, 207) 26 (208, 209, 210, 211, 212, 213, 214, 215) 27 (216, 217, 218, 219, 220, 221, 222, 223) 28 (224, 225, 226, 227, 228, 229, 230, 231) 29 (232, 233, 234, 235, 236, 237, 238, 239) 30 (240, 241, 242, 243, 244, 245, 246, 247) 31 (248, 249, 250, 251, 252, 253, 254, 255) 32 (256, 257, 258, 259, 260, 261, 262, 263) 33 (264, 265, 266, 267, 268, 269, 270, 271) 34 (272, 273, 274, 275, 276, 277, 278, 279) 35 (280, 281, 282, 283, 284, 285, 286, 287) 36 (288, 289, 290, 291, 292, 293, 294, 295) 37 (296, 297, 298, 299, 300, 301, 302, 303) 38 (304, 305, 306, 307, 308, 309, 310, 311) 39 (312, 313, 314, 315, 316, 317, 318, 319) 40 (320, 321, 322, 323, 324, 325, 326, 327) 41 (328, 329, 330, 331, 332, 333, 334, 335) 42 (336, 337, 338, 339, 340, 341, 342, 343) 43 (344, 345, 346, 347, 348, 349, 350, 351) 44 (352, 353, 354, 355, 356, 357, 358, 359) 45 (360, 361, 362, 363, 364, 365, 366, 367) 46 (368, 369, 370, 371, 372, 373, 374, 375) 47 (376, 377, 378, 379, 380, 381, 382, 383) MEMORY RA PA SIZE 0x30000000 0x830000000 192G 0x4000000000 0x80000000000 256G 0x8080000000 0x100000000000 256G IO DEVICE PSEUDONYM OPTIONS pci@340 pci_1 pci@380 pci_2 pci@3c0 pci_3 pci@400 pci_4 pci@440 pci_5 pci@340/pci@1/pci@0/pci@6 /SYS/RCSA/PCIE3 pci@340/pci@1/pci@0/pci@c /SYS/RCSA/PCIE4 pci@380/pci@1/pci@0/pci@a /SYS/RCSA/PCIE9 pci@380/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE10 pci@3c0/pci@1/pci@0/pci@e /SYS/RCSA/PCIE11 pci@3c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE12 pci@400/pci@1/pci@0/pci@e /SYS/RCSA/PCIE5 pci@400/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE6 pci@440/pci@1/pci@0/pci@e /SYS/RCSA/PCIE7 pci@440/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE8 ------------------------------------------------------------------------------ NAME db CORE CID CPUSET 48 (384, 385, 386, 387, 388, 389, 390, 391) 49 (392, 393, 394, 395, 396, 397, 398, 399) 50 (400, 401, 402, 403, 404, 405, 406, 407) 51 (408, 409, 410, 411, 412, 413, 414, 415) 52 (416, 417, 418, 419, 420, 421, 422, 423) 53 (424, 425, 426, 427, 428, 429, 430, 431) 54 (432, 433, 434, 435, 436, 437, 438, 439) 55 (440, 441, 442, 443, 444, 445, 446, 447) 56 (448, 449, 450, 451, 452, 453, 454, 455) 57 (456, 457, 458, 459, 460, 461, 462, 463) 58 (464, 465, 466, 467, 468, 469, 470, 471) 59 (472, 473, 474, 475, 476, 477, 478, 479) 60 (480, 481, 482, 483, 484, 485, 486, 487) 61 (488, 489, 490, 491, 492, 493, 494, 495) 62 (496, 497, 498, 499, 500, 501, 502, 503) 63 (504, 505, 506, 507, 508, 509, 510, 511) MEMORY RA PA SIZE 0x80000000 0x180000000000 256G IO DEVICE PSEUDONYM OPTIONS pci@480 pci_6 pci@4c0 pci_7 pci@480/pci@1/pci@0/pci@a /SYS/RCSA/PCIE13 pci@480/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE14 pci@4c0/pci@1/pci@0/pci@8 /SYS/RCSA/PCIE15 pci@4c0/pci@1/pci@0/pci@4 /SYS/RCSA/PCIE16 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1 pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2 Start the domains: # ldm start app LDom app started # ldm start db LDom db started Make sure to start the vntsd service that was created, above. # svcs -a | grep ldo disabled 8:38:38 svc:/ldoms/vntsd:default online 8:38:58 svc:/ldoms/agents:default online 8:39:25 svc:/ldoms/ldmd:default # svcadm enable vntsd Now use the MAC address to configure the Solaris 11 Automated Installation. Database Logical Domain # telnet localhost 5000 {0} ok devalias screen /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@7/display@0 disk7 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p3 disk6 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p2 disk5 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p1 disk4 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p0 scsi1 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0 net3 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0,1 net2 /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 virtual-console /virtual-devices/console@1 name aliases {0} ok boot net2 Boot device: /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 File and args: 1000 Mbps full duplex Link up Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx WLS Logical Domain # telnet localhost 5001 {0} ok devalias hdd1 /virtual-devices@100/channel-devices@200/disk@0 vnet1 /virtual-devices@100/channel-devices@200/network@0 net /virtual-devices@100/channel-devices@200/network@0 disk /virtual-devices@100/channel-devices@200/disk@0 virtual-console /virtual-devices/console@1 name aliases {0} ok boot net Boot device: /virtual-devices@100/channel-devices@200/network@0 File and args: Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx Repeat the process for the second SPARC T5-4, install Solaris, RAC and WebLogic Cluster, and you are ready to go. Maybe buying a SuperCluster would have been easier.

Read the article

Tracing Silex from PHP to the OS with DTrace

- by cj

In this blog post I show the full stack tracing of Brendan Gregg's php_syscolors.d script in the DTrace Toolkit. The Toolkit contains a dozen very useful PHP DTrace scripts and many more scripts for other languages and the OS. For this example, I'll trace the PHP micro framework Silex, which was the topic of the second of two talks by Dustin Whittle at a recent SF PHP Meetup. His slides are at Silex: From Micro to Full Stack. Installing DTrace and PHP The php_syscolors.d script uses some static PHP probes and some kernel probes. For Oracle Linux I discussed installing DTrace and PHP in DTrace PHP Using Oracle Linux 'playground' Pre-Built Packages. On other platforms with DTrace support, follow your standard procedures to enable DTrace and load the correct providers. The sdt and systrace providers are required in addition to fasttrap. On Oracle Linux, I loaded the DTrace modules like: # modprobe fasttrap # modprobe sdt # modprobe systrace # chmod 666 /dev/dtrace/helper Installing the DTrace Toolkit I download DTraceToolkit-0.99.tar.gz and extracted it: $ tar -zxf DTraceToolkit-0.99.tar.gz The PHP scripts are in the Php directory and examples in the Examples directory. Installing Silex I downloaded the "fat" Silex .tgz file from the download page and extracted it: $ tar -zxf silex_fat.tgz I changed the demonstration silex/web/index.php so I could use the PHP development web server: <?php // web/index.php $filename = __DIR__.preg_replace('#(\?.*)$#', '', $_SERVER['REQUEST_URI']); if (php_sapi_name() === 'cli-server' && is_file($filename)) { return false; } require_once __DIR__.'/../vendor/autoload.php'; $app = new Silex\Application(); //$app['debug'] = true; $app->get('/hello', function() { return 'Hello!'; }); $app->run(); ?> Running DTrace The php_syscolors.d script uses the -Z option to dtrace, so it can be started before PHP, i.e. when there are zero of the requested probes available to be traced. I ran DTrace like: # cd DTraceToolkit-0.99/Php # ./php_syscolors.d Next, I started the PHP developer web server in a second terminal: $ cd silex $ php -S localhost:8080 -t web web/index.php At this point, the web server is idle, waiting for requests. DTrace is idle, waiting for the probes in php_syscolors.d to be fired, at which time the action associated with each probe will run. I then loaded the demonstration page in a browser: http://localhost:8080/hello When the request was fulfilled and the simple output of "Hello" was displayed, I ^C'd php and dtrace in their terminals to stop them. DTrace output over a thousand lines long had been generated. Here is one snippet from when run() was invoked: C PID/TID DELTA(us) FILE:LINE TYPE -- NAME ... 1 4765/4765 21 Application.php:487 func -> run 1 4765/4765 29 ClassLoader.php:182 func -> loadClass 1 4765/4765 17 ClassLoader.php:198 func -> findFile 1 4765/4765 31 ":- syscall -> access 1 4765/4765 26 ":- syscall <- access 1 4765/4765 16 ClassLoader.php:198 func <- findFile 1 4765/4765 25 ":- syscall -> newlstat 1 4765/4765 15 ":- syscall <- newlstat 1 4765/4765 13 ":- syscall -> newlstat 1 4765/4765 13 ":- syscall <- newlstat 1 4765/4765 22 ":- syscall -> newlstat 1 4765/4765 14 ":- syscall <- newlstat 1 4765/4765 15 ":- syscall -> newlstat 1 4765/4765 60 ":- syscall <- newlstat 1 4765/4765 13 ":- syscall -> newlstat 1 4765/4765 13 ":- syscall <- newlstat 1 4765/4765 20 ":- syscall -> open 1 4765/4765 16 ":- syscall <- open 1 4765/4765 26 ":- syscall -> newfstat 1 4765/4765 12 ":- syscall <- newfstat 1 4765/4765 17 ":- syscall -> newfstat 1 4765/4765 12 ":- syscall <- newfstat 1 4765/4765 12 ":- syscall -> newfstat 1 4765/4765 12 ":- syscall <- newfstat 1 4765/4765 20 ":- syscall -> mmap 1 4765/4765 14 ":- syscall <- mmap 1 4765/4765 3201 ":- syscall -> mmap 1 4765/4765 27 ":- syscall <- mmap 1 4765/4765 1233 ":- syscall -> munmap 1 4765/4765 53 ":- syscall <- munmap 1 4765/4765 15 ":- syscall -> close 1 4765/4765 13 ":- syscall <- close 1 4765/4765 34 Request.php:32 func -> main 1 4765/4765 22 Request.php:32 func <- main 1 4765/4765 31 ClassLoader.php:182 func <- loadClass 1 4765/4765 33 Request.php:249 func -> createFromGlobals 1 4765/4765 29 Request.php:198 func -> __construct 1 4765/4765 24 Request.php:218 func -> initialize 1 4765/4765 26 ClassLoader.php:182 func -> loadClass 1 4765/4765 89 ClassLoader.php:198 func -> findFile 1 4765/4765 43 ":- syscall -> access ... The output shows PHP functions being called and returning (and where they are located) and which system calls the PHP functions in turn invoked. The time each line took from the previous one is displayed in the third column. The first column is the CPU number. In this example, the process was always on CPU 1 so the output is naturally ordered without requiring post-processing, or the D script requiring to be modified to display a time stamp. On a terminal, the output of php_syscolors.d is color-coded according to whether each function is a PHP or system one, hence the file name. Summary With one tool, I was able to trace the interaction of a user application with the operating system. I was able to do this to an application running "live" in a web context. The DTrace Toolkit provides a very handy repository of DTrace information. Even though the PHP scripts were created in the time frame of the original PHP DTrace PECL extension, which only had PHP function entry and return probes, the scripts provide core examples for custom investigation and resolution scripts. You can easily adapt the ideas and and create scripts using the other PHP static probes, which are listed in the PHP Manual. Because DTrace is "always on", you can take advantage of it to resolve development questions or fix production situations.

Read the article

Rebuilding CoasterBuzz, Part III: The architecture using the "Web stack of love"

- by Jeff

This is the third post in a series about rebuilding one of my Web sites, which has been around for 12 years. I hope to relaunch in the next month or two. More: Part I: Evolution, and death to WCF Part II: Hot data objects I finally hit a point in the re-do of CoasterBuzz where I feel like the major pieces are in place... rewritten, ported and what not, so that I can focus now on front-end design and more interesting creative problems. I've been asked on more than one occasion (OK, just twice) what's going on under the covers, so I figure this might be a good time to explain the overall architecture. As it turns out, I'm using a whole lof of the "Web stack of love," as Scott Hanselman likes to refer to it. Oh that Hanselman. First off, at the center of it all, is BizTalk. Just kidding. That's "enterprise architecture" humor, where every discussion starts with how they'll use BizTalk. Here are the bigger moving parts: It's fairly straight forward. A common library lives in a number of Web apps, all of which are (or will be) powered by ASP.NET MVC 4. They all talk to the same database. There is the main Web site, which also has the endpoint for the Silverlight-based Feed app. The cstr.bz site handles redirects, which are generated when news items are published and sent to Twitter. Facebook publishing is handled via the RSS Graffiti Facebook app. The API site handles requests from the Windows Phone app. The main site depends very heavily on POP Forums, the open source, MVC-based forum I maintain. It serves a number of functions, primarily handling users. These user objects serve in non-forum roles to handle things like news and database contributions, maintaining track records (coaster nerd for "list of rides I've been on") and, perhaps most importantly, paid club memberships. Before I get into more specifics, note that the "glue" for everything is Ninject, the dependency injection framework. I actually prefer StructureMap these days, but I started with Ninject in POP Forums a long time ago. POP Forums has a static class, PopForumsActivation, that new's up an instance of the container, and you can call it from where ever. The downside is that the forums require Ninject in your MVC app as the default dependency resolver. At some point, I'll decouple it, but for now it's not in the way. In the general sense, the entire set of apps follow a repository-service-controller-view pattern. Repos just do data access, service classes do business logic, controllers compose and route, views view. The forum also provides Scoring Game functionality. The Scoring Game is a reasonably abstract framework to award users points based on certain actions, and then award achievements when a certain number of point events happen. For example, the forum already awards a point when someone plus-one's a post you made. You can set up an achievement that says, "Give the user an award when they've had 100 posts plus'd." It also does zero-point entries into the ledger, so if you make a post, you could award an achievement based on 100 posts made. Wiring in the scoring game to CoasterBuzz functionality is just a matter of going to the Ninject container and getting an instance of the event publisher, and passing it events. Forum adapters were introduced into POP Forums a few versions ago, and they can intercept the model generated for forum topic lists and threads and designate an alternate view. These are used to make the "Day in Pictures" forum, where users can upload photos as frame-by-frame photo threads. Another adapter adds an association UI, so users can associate specific amusement parks with their trip report posts. The Silverlight-based Feed app talks to a simple JSON endpoint in the main app. This uses an underlying library I wrote ages ago, simply called Feeds, that aggregates event information. You inherit from a base class that creates instances of a publisher interface, and then use that class to send it an event type and any number of data fields. Feeds has two publishers: One is to the database, and that's used for the endpoint that talks to the Silverlight app. The second publisher publishes to Twitter, if the event is of the type "news." The wiring is a little strange, because for the new posts and topics events, I'm actually pulling out the forum repository classes from the Ninject container and replacing them with overridden methods to publish. I should probably be doing this at the service class level, but whatever. It's my mess. cstr.bz doesn't do anything interesting. It looks up the path, and if it has a match, does a 301 redirect to the long URL. The API site just serves up JSON for the Windows Phone app. The Windows Phone app is Silverlight, of course, and there isn't much to it. It does use the control toolkit, but beyond that, it relies on a simple class that creates a Webclient and calls the server for JSON to deserialize. The same class is now used by the Feed app, which used to use WCF. Simple is better. Data access in POP Forums is all straight SQL, because a lot of it was ported from the ASP.NET version. Most CoasterBuzz data access is handled by the Entity Framework, using the code-first model. The context class in this case does a lot of work to make sure that the table and key mapping works, since much of it breaks from the normal conventions of EF. One of the more powerful things you can do with EF, once you understand the little gotchas, is split tables by row into different entities. For example, a roller coaster photo has everything in the same row, including the metadata, the thumbnail bytes and the image itself. Obviously, if you want to get a list of photos to iterate over in a view, you don't want to get the image data. The use of navigation properties makes it easier to get just what you want. The front end includes Razor views in MVC, and jQuery is used for client-side goodness. I'm also using jQuery UI in a few places, for tabs, a dialog box and autocomplete. I'm also, tentatively, using jQuery Mobile. I've already ported most forum views to Mobile, but they need some work as v1.1 isn't finished yet. I'm not sure if I'll ship CoasterBuzz with mobile views or not yet. It's on the radar, but not something in my delivery criteria. That covers all of the big frameworks in play. Next time I hope to talk more about the front-end experience, which to me is where most of the fun is these days. Hoping to launch in the next month or two. Getting tired of looking at the old site!

Read the article

The SSIS tuning tip that everyone misses

- by Rob Farley

I know that everyone misses this, because I’m yet to find someone who doesn’t have a bit of an epiphany when I describe this. When tuning Data Flows in SQL Server Integration Services, people see the Data Flow as moving from the Source to the Destination, passing through a number of transformations. What people don’t consider is the Source, getting the data out of a database. Remember, the source of data for your Data Flow is not your Source Component. It’s wherever the data is, within your database, probably on a disk somewhere. You need to tune your query to optimise it for SSIS, and this is what most people fail to do. I’m not suggesting that people don’t tune their queries – there’s plenty of information out there about making sure that your queries run as fast as possible. But for SSIS, it’s not about how fast your query runs. Let me say that again, but in bolder text: The speed of an SSIS Source is not about how fast your query runs. If your query is used in a Source component for SSIS, the thing that matters is how fast it starts returning data. In particular, those first 10,000 rows to populate that first buffer, ready to pass down the rest of the transformations on its way to the Destination. Let’s look at a very simple query as an example, using the AdventureWorks database: We’re picking the different Weight values out of the Product table, and it’s doing this by scanning the table and doing a Sort. It’s a Distinct Sort, which means that the duplicates are discarded. It'll be no surprise to see that the data produced is sorted. Obvious, I know, but I'm making a comparison to what I'll do later. Before I explain the problem here, let me jump back into the SSIS world... If you’ve investigated how to tune an SSIS flow, then you’ll know that some SSIS Data Flow Transformations are known to be Blocking, some are Partially Blocking, and some are simply Row transformations. Take the SSIS Sort transformation, for example. I’m using a larger data set for this, because my small list of Weights won’t demonstrate it well enough. Seven buffers of data came out of the source, but none of them could be pushed past the Sort operator, just in case the last buffer contained the data that would be sorted into the first buffer. This is a blocking operation. Back in the land of T-SQL, we consider our Distinct Sort operator. It’s also blocking. It won’t let data through until it’s seen all of it. If you weren’t okay with blocking operations in SSIS, why would you be happy with them in an execution plan? The source of your data is not your OLE DB Source. Remember this. The source of your data is the NCIX/CIX/Heap from which it’s being pulled. Picture it like this... the data flowing from the Clustered Index, through the Distinct Sort operator, into the SELECT operator, where a series of SSIS Buffers are populated, flowing (as they get full) down through the SSIS transformations. Alright, I know that I’m taking some liberties here, because the two queries aren’t the same, but consider the visual. The data is flowing from your disk and through your execution plan before it reaches SSIS, so you could easily find that a blocking operation in your plan is just as painful as a blocking operation in your SSIS Data Flow. Luckily, T-SQL gives us a brilliant query hint to help avoid this. OPTION (FAST 10000) This hint means that it will choose a query which will optimise for the first 10,000 rows – the default SSIS buffer size. And the effect can be quite significant. First let’s consider a simple example, then we’ll look at a larger one. Consider our weights. We don’t have 10,000, so I’m going to use OPTION (FAST 1) instead. You’ll notice that the query is more expensive, using a Flow Distinct operator instead of the Distinct Sort. This operator is consuming 84% of the query, instead of the 59% we saw from the Distinct Sort. But the first row could be returned quicker – a Flow Distinct operator is non-blocking. The data here isn’t sorted, of course. It’s in the same order that it came out of the index, just with duplicates removed. As soon as a Flow Distinct sees a value that it hasn’t come across before, it pushes it out to the operator on its left. It still has to maintain the list of what it’s seen so far, but by handling it one row at a time, it can push rows through quicker. Overall, it’s a lot more work than the Distinct Sort, but if the priority is the first few rows, then perhaps that’s exactly what we want. The Query Optimizer seems to do this by optimising the query as if there were only one row coming through: This 1 row estimation is caused by the Query Optimizer imagining the SELECT operation saying “Give me one row” first, and this message being passed all the way along. The request might not make it all the way back to the source, but in my simple example, it does. I hope this simple example has helped you understand the significance of the blocking operator. Now I’m going to show you an example on a much larger data set. This data was fetching about 780,000 rows, and these are the Estimated Plans. The data needed to be Sorted, to support further SSIS operations that needed that. First, without the hint. ...and now with OPTION (FAST 10000): A very different plan, I’m sure you’ll agree. In case you’re curious, those arrows in the top one are 780,000 rows in size. In the second, they’re estimated to be 10,000, although the Actual figures end up being 780,000. The top one definitely runs faster. It finished several times faster than the second one. With the amount of data being considered, these numbers were in minutes. Look at the second one – it’s doing Nested Loops, across 780,000 rows! That’s not generally recommended at all. That’s “Go and make yourself a coffee” time. In this case, it was about six or seven minutes. The faster one finished in about a minute. But in SSIS-land, things are different. The particular data flow that was consuming this data was significant. It was being pumped into a Script Component to process each row based on previous rows, creating about a dozen different flows. The data flow would take roughly ten minutes to run – ten minutes from when the data first appeared. The query that completes faster – chosen by the Query Optimizer with no hints, based on accurate statistics (rather than pretending the numbers are smaller) – would take a minute to start getting the data into SSIS, at which point the ten-minute flow would start, taking eleven minutes to complete. The query that took longer – chosen by the Query Optimizer pretending it only wanted the first 10,000 rows – would take only ten seconds to fill the first buffer. Despite the fact that it might have taken the database another six or seven minutes to get the data out, SSIS didn’t care. Every time it wanted the next buffer of data, it was already available, and the whole process finished in about ten minutes and ten seconds. When debugging SSIS, you run the package, and sit there waiting to see the Debug information start appearing. You look for the numbers on the data flow, and seeing operators going Yellow and Green. Without the hint, I’d sit there for a minute. With the hint, just ten seconds. You can imagine which one I preferred. By adding this hint, it felt like a magic wand had been waved across the query, to make it run several times faster. It wasn’t the case at all – but it felt like it to SSIS.

Read the article

Pixel Shader Giving Black output

- by Yashwinder

I am coding in C# using Windows Forms and the SlimDX API to show the effect of a pixel shader. When I am setting the pixel shader, I am getting a black output screen but if I am not using the pixel shader then I am getting my image rendered on the screen. I have the following C# code using System; using System.Collections.Generic; using System.Linq; using System.Windows.Forms; using System.Runtime.InteropServices; using SlimDX.Direct3D9; using SlimDX; using SlimDX.Windows; using System.Drawing; using System.Threading; namespace WindowsFormsApplication1 { // Vertex structure. [StructLayout(LayoutKind.Sequential)] struct Vertex { public Vector3 Position; public float Tu; public float Tv; public static int SizeBytes { get { return Marshal.SizeOf(typeof(Vertex)); } } public static VertexFormat Format { get { return VertexFormat.Position | VertexFormat.Texture1; } } } static class Program { public static Device D3DDevice; // Direct3D device. public static VertexBuffer Vertices; // Vertex buffer object used to hold vertices. public static Texture Image; // Texture object to hold the image loaded from a file. public static int time; // Used for rotation caculations. public static float angle; // Angle of rottaion. public static Form1 Window =new Form1(); public static string filepath; static VertexShader vertexShader = null; static ConstantTable constantTable = null; static ImageInformation info; [STAThread] static void Main() { filepath = "C:\\Users\\Public\\Pictures\\Sample Pictures\\Garden.jpg"; info = new ImageInformation(); info = ImageInformation.FromFile(filepath); PresentParameters presentParams = new PresentParameters(); // Below are the required bare mininum, needed to initialize the D3D device. presentParams.BackBufferHeight = info.Height; // BackBufferHeight, set to the Window's height. presentParams.BackBufferWidth = info.Width+200; // BackBufferWidth, set to the Window's width. presentParams.Windowed =true; presentParams.DeviceWindowHandle = Window.panel2 .Handle; // DeviceWindowHandle, set to the Window's handle. // Create the device. D3DDevice = new Device(new Direct3D (), 0, DeviceType.Hardware, Window.Handle, CreateFlags.HardwareVertexProcessing, presentParams); // Create the vertex buffer and fill with the triangle vertices. (Non-indexed) // Remember 3 vetices for a triangle, 2 tris per quad = 6. Vertices = new VertexBuffer(D3DDevice, 6 * Vertex.SizeBytes, Usage.WriteOnly, VertexFormat.None, Pool.Managed); DataStream stream = Vertices.Lock(0, 0, LockFlags.None); stream.WriteRange(BuildVertexData()); Vertices.Unlock(); // Create the texture. Image = Texture.FromFile(D3DDevice,filepath ); // Turn off culling, so we see the front and back of the triangle D3DDevice.SetRenderState(RenderState.CullMode, Cull.None); // Turn off lighting D3DDevice.SetRenderState(RenderState.Lighting, false); ShaderBytecode sbcv = ShaderBytecode.CompileFromFile("C:\\Users\\yashwinder singh\\Desktop\\vertexShader.vs", "vs_main", "vs_1_1", ShaderFlags.None); constantTable = sbcv.ConstantTable; vertexShader = new VertexShader(D3DDevice, sbcv); ShaderBytecode sbc = ShaderBytecode.CompileFromFile("C:\\Users\\yashwinder singh\\Desktop\\pixelShader.txt", "ps_main", "ps_3_0", ShaderFlags.None); PixelShader ps = new PixelShader(D3DDevice, sbc); VertexDeclaration vertexDecl = new VertexDeclaration(D3DDevice, new[] { new VertexElement(0, 0, DeclarationType.Float3, DeclarationMethod.Default, DeclarationUsage.PositionTransformed, 0), new VertexElement(0, 12, DeclarationType.Float2 , DeclarationMethod.Default, DeclarationUsage.TextureCoordinate , 0), VertexElement.VertexDeclarationEnd }); Application.EnableVisualStyles(); MessagePump.Run(Window, () => { // Clear the backbuffer to a black color. D3DDevice.Clear(ClearFlags.Target | ClearFlags.ZBuffer, Color.Black, 1.0f, 0); // Begin the scene. D3DDevice.BeginScene(); // Setup the world, view and projection matrices. //D3DDevice.VertexShader = vertexShader; //D3DDevice.PixelShader = ps; // Render the vertex buffer. D3DDevice.SetStreamSource(0, Vertices, 0, Vertex.SizeBytes); D3DDevice.VertexFormat = Vertex.Format; // Setup our texture. Using Textures introduces the texture stage states, // which govern how Textures get blended together (in the case of multiple // Textures) and lighting information. D3DDevice.SetTexture(0, Image); // Now drawing 2 triangles, for a quad. D3DDevice.DrawPrimitives(PrimitiveType.TriangleList , 0, 2); // End the scene. D3DDevice.EndScene(); // Present the backbuffer contents to the screen. D3DDevice.Present(); }); if (Image != null) Image.Dispose(); if (Vertices != null) Vertices.Dispose(); if (D3DDevice != null) D3DDevice.Dispose(); } private static Vertex[] BuildVertexData() { Vertex[] vertexData = new Vertex[6]; vertexData[0].Position = new Vector3(-1.0f, 1.0f, 0.0f); vertexData[0].Tu = 0.0f; vertexData[0].Tv = 0.0f; vertexData[1].Position = new Vector3(-1.0f, -1.0f, 0.0f); vertexData[1].Tu = 0.0f; vertexData[1].Tv = 1.0f; vertexData[2].Position = new Vector3(1.0f, 1.0f, 0.0f); vertexData[2].Tu = 1.0f; vertexData[2].Tv = 0.0f; vertexData[3].Position = new Vector3(-1.0f, -1.0f, 0.0f); vertexData[3].Tu = 0.0f; vertexData[3].Tv = 1.0f; vertexData[4].Position = new Vector3(1.0f, -1.0f, 0.0f); vertexData[4].Tu = 1.0f; vertexData[4].Tv = 1.0f; vertexData[5].Position = new Vector3(1.0f, 1.0f, 0.0f); vertexData[5].Tu = 1.0f; vertexData[5].Tv = 0.0f; return vertexData; } } } And my pixel shader and vertex shader code are as following // Pixel shader input structure struct PS_INPUT { float4 Position : POSITION; float2 Texture : TEXCOORD0; }; // Pixel shader output structure struct PS_OUTPUT { float4 Color : COLOR0; }; // Global variables sampler2D Tex0; // Name: Simple Pixel Shader // Type: Pixel shader // Desc: Fetch texture and blend with constant color // PS_OUTPUT ps_main( in PS_INPUT In ) { PS_OUTPUT Out; //create an output pixel Out.Color = tex2D(Tex0, In.Texture); //do a texture lookup Out.Color *= float4(0.9f, 0.8f, 0.0f, 1); //do a simple effect return Out; //return output pixel } // Vertex shader input structure struct VS_INPUT { float4 Position : POSITION; float2 Texture : TEXCOORD0; }; // Vertex shader output structure struct VS_OUTPUT { float4 Position : POSITION; float2 Texture : TEXCOORD0; }; // Global variables float4x4 WorldViewProj; // Name: Simple Vertex Shader // Type: Vertex shader // Desc: Vertex transformation and texture coord pass-through // VS_OUTPUT vs_main( in VS_INPUT In ) { VS_OUTPUT Out; //create an output vertex Out.Position = mul(In.Position, WorldViewProj); //apply vertex transformation Out.Texture = In.Texture; //copy original texcoords return Out; //return output vertex }

Read the article

Personal Technology – Laptop Screen Blank – No Post – No BIOS – No Boot

- by Pinal Dave

If your laptop Screen is Blank and there is no POST, BIOS or boot, you can follow the steps mentioned here and there are chances that it will work if there is no hardware failure inside. Step 1: Remove the power cord from the laptop Step 2: Remove the battery from the laptop Step 3: Hold power button (keep it pressed) for almost 60 seconds Step 4: Plug power back in laptop Step 5: Start computer and it should just start normally. Step 6: Now shut down Step 7: Insert the battery back in the laptop Step 8: Start laptop again and it should work Note 1: If your laptop does not work after inserting back the memory. Remove the memory and repeat above process. Do not insert the battery back as it is malfunctioning. Note 2: If your screen is faulty or have issues with your hardware (motherboard, screen or anything else) this method will not fix your computer. Those, who care about how I come up with this not SQL related blog post, here is the very funny true story. If you are a married man, you will know what I am going to describe next. May be you have faced the same situation or at least you feel and understand my situation. My wife’s computer suddenly stops working when she was searching for my daughter’s mathematics worksheets online. While the fatal accident happened with my wife’s computer (which was my loyal computer for over 4 years before she got it), I was working in my home office, fixing a high priority issue (live order’s database was corrupted) with one of the largest eCommerce websites. While I was working on production server where I was fixing database corruption, my wife ran to my home office. Here is how the conversation went: Wife: This computer does not work. I: Restart it. Wife: It does not start. I: What did you do with it? Wife: Nothing, it just stopped working. I: Okey, I will look into it later, working on the very urgent issue. Wife: I was printing my daughter’s worksheet. I: Hm.. Okey. Wife: It was the mathematics worksheet, which you promised you will teach but you never get around to do it, so I am doing it myself. I: Thanks. I appreciate it. I am very busy with this issue as million dollar transaction are not happening as the database got corrupted and … Wife: So what … umm… You mean to say that you care about this customer more than your daughter. You know she got A+ in every other class but in mathematics she got only A. She missed that extra credit question. I: She is only 4, it is okay. Wife: She is 4.5 years old not 4. So you are not going to fix this computer which does not start at all. I think our daughter next time will even get lower grades as her dad is busy fixing something. I: Alright, I give up bring me that computer. Our daughter who was listening everything so far she finally decided to speak up. Daughter: Dad, it is a laptop not computer. I: Yes, sweety get that laptop here and your dad is going to fix the this small issue of million dollar issue later on. I decided to pay attention to my wife’s computer. She was right. No matter what I do, it will not boot up, it will not start, no BIOS, no POST screen. The computer starts for a second but nothing comes up on the screen. The light indicating hard drive comes up for a second and goes off. Nothing happens. I removed every single USB drive from the laptop but it still would not start. It was indeed no fun for me. Finally I remember my days when I was not married and used to study in University of Southern California, Los Angeles. I remembered that I used to have very old second (or maybe third or fourth) hand computer with me. In polite words, I had pre-owned computer and it used to face very similar issues again and again. I had small routine I used to follow to fix my old computer and I had decided to follow the same steps again with this computer. Step 1: Remove the power cord from the laptop Step 2: Remove the battery from the laptop Step 3: Hold power button (keep it pressed) for almost 60 seconds Step 4: Plug power back in laptop Step 5: Start computer and it should just start normally. Step 6: Now shut down Step 7: Insert the battery back in the laptop Step 8: Start laptop again and it should work Note 1: If your laptop does not work after inserting back the memory. Remove the memory and repeat above process. Do not insert the battery back as it is malfunctioning. Note 2: If your screen is faulty or have issues with your hardware (motherboard, screen or anything else) this method will not fix your computer. Once I followed above process, her computer worked. I was very delighted, that now I can go back to solving the problem where millions of transactions were waiting as I was fixing corrupted database and it the current state of the database was in emergency mode. Once I fixed the computer, I looked at my wife and asked. I: Well, now this laptop is back online, can I get guaranteed that she will get A+ in mathematics in this week’s quiz? Wife: Sure, I promise. I: Fantastic. After saying that I started to look at my database corruption and my wife interrupted me again. Wife: Btw, I forgot to tell you. Our daughter had got A in mathematics last week but she had another quiz today and she already have received A+ there. I kept my promise. I looked at her and she started to walk outside room, before I say anything my phone rang. DBA from eCommerce company had called me, as he was wondering why there is no activity from my side in last 10 minutes. DBA: Hey bud, are you still connected. I see um… no activity in last 10 minutes. I: Oh, well, I was just saving the world. I am back now. After two hours I had fixed the database corruption and everything was normal. I was outsmarted by my wife but honestly I still respect and love her the same as she is the one who spends countless hours with our daughter so she does not miss me and I can continue writing blogs and keep on doing technology evangelism. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Humor, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Sending HTML to Gmail always lands in Spam

- by cartaysm

I am having an issue with sending HTML emails to Gmail. I can send them to Yahoo, Hotmail, RR, AOL, etc. with no problem at all, but when I send them to Gmail I get kicked to spam. I have checked my IP with a lot of different list to make sure it is not listed anywhere, which it is not. spamhaus = is not listed in the DBL abuse.net = is not listed in the SBL abuse.net = is not listed in the PBL abuse.net = is not listed in the XBL spamcop = not listed in bl.spamcop.net host 24.172.204.xxx xxx.204.172.24.in-addr.arpa domain name pointer xxxevents.com. host xxxevents.com xxxevents.com has address 24.172.204.xxx xxxevents.com mail is handled by 10 mail.xxxevents.com. I am just trying to send a very VERY basic HTML message (listed below). I use an Ubuntu server, swiftmailer, multipart/alternative (HTML & plain), SPF = pass, and I am going to setup DKIM today to see if that fixes it (but I doubt it will)... For now I will only post the message I sent that gets kicked to spam and can provide any details needed. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head><title>Triathlon</title></head> <body> <table cellpadding="0" cellspacing="0"> <tr> <td> <p>Thank you for attending our 4th annual Triathlon/Duathlon/5k at Hueston Woods State Park on August 12th. This event is held annually to raise research funding for Crohn's Disease, Ulcerative Colitis, and Muscular Dystrophy diseases.</p> </td> </tr> <tr> <td> <p>As you know the results and pictures have been posted on our home page at since Sunday 8/13/2012. Now we also have updated our Facebook page with those photos and you can start tagging yourself or downloading the pictures now! <br /> our page and tag yourself at </p> <p> test test </p> <p>Race day events is professionally managed by Speedy-Feet</p> </td> </tr> </table> </body> </html> Just plain text works great, I thought maybe wording was messing me up but not the case... I am almost done install opendkim so I will be able to rule that out very soon. Edit: Okay installed opendkim and I am getting passing results so I sent the html I posted above it went through just fine. So now when I start to add a few more lines I am getting kicked back to spam again. Here is updated html code: ` <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head><title>Triathlon</title></head> <body> <table cellpadding="0" cellspacing="0"> <tr> <td> <center><a href='http://xxxevents.com' target="_blank"> <font face="Verdana, Arial, Helvetica, sans-serif" color="#666666" size="2"> <img src="http://xxxevents.com/marketemailimages/xxxlogo.png" alt="xxx It Events | Raising funds for Crohns, Colitis, and Muscular Dystrophy" border="0" /> </font></a></center> </td> <tr> <td> <p>Thank you for attending our 4th annual Triathlon/Duathlon/5k at Hueston Woods State Park on August 12th. This event is held annually to raise research funding for Crohn's Disease, Ulcerative Colitis, and Muscular Dystrophy diseases.</p> </td> </tr> <tr> <td> <p>As you know the results and pictures have been posted on our home page at since Sunday 8/13/2012. Now we also have updated our Facebook page with those photos and you can start tagging yourself or downloading the pictures now! <br /> our page and tag yourself at </p> <p> test test </p> <p>Race day events is professionally managed by Speedy-Feet</p> </td> </tr> </table> <table width="100%" border="0" cellspacing="0" cellpadding="0"> <tr> <td valign="top"> <div align="center" style="font-family:Verdana, Arial, Helvetica, sans-serif; font-size:10px;"><br />PO Box xxx Maineville, OH 45039<br /> <a href="mailto:[email protected]">[email protected]</a> | <a href='http://xxxevents.com' target="_blank">xxxevents.com</a><br /> <br /> </div> </td> </tr> </table> </body> </html>`

Read the article

Answers to Your Common Oracle Database Lifecycle Management Questions

- by Scott McNeil

We recently ran a live webcast on Strategies for Managing Oracle Database's Lifecycle. There were tons of questions from our audience that we simply could not get to during the hour long presentation. Below are some of those questions along with their answers. Enjoy! Question: In the webcast the presenter talked about “gold” configuration standards, for those who want to use this technique, could you recommend a best practice to consider or follow? How do I get started? Answer:Gold configuration standardization is a quick and easy way to improve availability through consistency. Start by choosing a reference database and saving the configuration to the Oracle Enterprise Manager repository using the Save Configuration feature. Next create a comparison template using the Oracle provided template as a starting point and modify the ignored properties to eliminate expected differences in your environment. Finally create a comparison specification using the comparison template you created plus your saved gold configuration and schedule it to run on a regular basis. Don’t forget to fill in the email addresses of those you want to notify upon drift detection. Watch the database configuration management demo to learn more. Question: Can Oracle Lifecycle Management Pack for Database help with patching an Oracle Real Application Cluster (RAC) environment? Answer: Yes, Oracle Enterprise Manager supports both parallel and rolling patch application of Oracle Real Application Clusters. The use of rolling patching is recommended as there is no downtime involved. For more details watch this demo. Question: What are some of the things administrators can do to control configuration drift? Why is it important? Answer:Configuration drift is one of the main causes of instability and downtime of applications. Oracle Enterprise Manager makes it easy to manage and control drift using scheduled configuration comparisons combined with comparison templates. Question: Does Oracle Enterprise Manager 12c Release 2 offer an incremental update feature for "gold" images? For instance, if the source binary has a higher PSU level, what is the best approach to update the existing "gold" image in the software library? Do you have to create a new image or can you just update the original one? Answer:Provisioning Profiles (Gold images) can contain the installation files and database configuration templates. Although it is possible to make some changes to the profile after creation (mainly to configuration), it is normally recommended to simply create a new profile after applying a patch to your reference database. Question: The webcast talked about enforcing in-house standards, does Oracle Enterprise Manager 12c offer verification of your databases and systems to those standards? For example, the initial "gold" image has been massively deployed over time, and there may be some changes to it. How can you do regular checks from Enterprise Manager to ensure the in-house standards are being enforced? Answer:There are really two methods to validate conformity to standards. The first method is to use gold standards which you compare other databases to report unwanted differences. This method uses a new comparison template technology which allows users to ignore known differences (i.e. SID, Start time, etc) which results in a report only showing important or non-conformant differences. This method is quick to setup and configure and recommended for those who want to get started validating compliance quickly. The second method leverages the new compliance framework which allows the creation of specific and robust validations. These compliance rules are grouped into standards which can be assigned to databases quickly and easily. Compliance rules allow for targeted and more sophisticated validation beyond the basic equals operation available in the comparison method. The compliance framework can be used to implement just about any internal or industry standard. The compliance results will track current and historic compliance scores at the overall and individual database targets. When the issue is resolved, the score is automatically affected. Compliance framework is the recommended long term solution for validating compliance using Oracle Enterprise Manager 12c. Check out this demo on database compliance to learn more. Question: If you are using the integration between Oracle Enterprise Manager and My Oracle Support in an "offline" mode, how do you know if you have the latest My Oracle Support metadata? Answer:In Oracle Enterprise Manager 12c Release 2, you now only need to download one zip file containing all of the metadata xmls files. There is no indication that the metadata has changed but you could run a checksum on the file and compare it to the previously downloaded version to see if it has changed. Question: What happens if a patch fails while administrators are applying it to a database or system? Answer:A large portion of Oracle Enterprise Manager's patch automation is the pre-requisite checks that happen to ensure the highest level of confidence the patch will successfully apply. It is recommended you test the patch in a non-production environment and save the patch plan as a template once successful so you can create new plans using the saved template. If you are using the recommended ‘out of place’ patching methodology, there is no urgency because the database is still running as the cloned Oracle home is being patched. Users can address the issue and restart the patch procedure at the point it left off. If you are using 'in place' method, you can address the issue and continue where the procedure left off. Question: Can Oracle Enterprise Manager 12c R2 compare configurations between more than one target at the same time? Answer:Oracle Enterprise Manager 12c can compare any number of target configurations at one time. This is the basis of many important use cases including Configuration Drift Management. These comparisons can also be scheduled on a regular basis and emails notification sent should any differences appear. To learn more about configuration search and compare watch this demo. Question: How is data comparison done since changes are taking place in a live production system? Answer:There are many things to keep in mind when using the data comparison feature (as part of the Change Management ability to compare table data). It was primarily intended to be used for maintaining consistency of important but relatively static data. For example, application seed data and application setup configuration. This data does not change often but is critical when testing an application to ensure results are consistent with production. It is not recommended to use data comparison on highly dynamic data like transactional tables or very large tables. Question: Which versions of Oracle Database can be monitored through Oracle Enterprise Manager 12c? Answer:Oracle Database versions: 9.2.0.8, 10.1.0.5, 10.2.0.4, 10.2.0.5, 11.1.0.7, 11.2.0.1, 11.2.0.2, 11.2.0.3. Watch the On-Demand Webcast Stay Connected: Twitter | Facebook | YouTube | Linkedin | NewsletterDownload the Oracle Enterprise Manager Cloud Control12c Mobile app

Read the article

SQL University: What and why of database refactoring

- by Mladen Prajdic

This is a post for a great idea called SQL University started by Jorge Segarra also famously known as SqlChicken on Twitter. It’s a collection of blog posts on different database related topics contributed by several smart people all over the world. So this week is mine and we’ll be talking about database testing and refactoring. In 3 posts we’ll cover: SQLU part 1 - What and why of database testing SQLU part 2 - What and why of database refactoring SQLU part 3 - Tools of the trade This is a second part of the series and in it we’ll take a look at what database refactoring is and why do it. Why refactor a database To know why refactor we first have to know what refactoring actually is. Code refactoring is a process where we change module internals in a way that does not change that module’s input/output behavior. For successful refactoring there is one crucial thing we absolutely must have: Tests. Automated unit tests are the only guarantee we have that we haven’t broken the input/output behavior before refactoring. If you haven’t go back ad read my post on the matter. Then start writing them. Next thing you need is a code module. Those are views, UDFs and stored procedures. By having direct table access we can kiss fast and sweet refactoring good bye. One more point to have a database abstraction layer. And no, ORM’s don’t fall into that category. But also know that refactoring is NOT adding new functionality to your code. Many have fallen into this trap. Don’t be one of them and resist the lure of the dark side. And it’s a strong lure. We developers in general love to add new stuff to our code, but hate fixing our own mistakes or changing existing code for no apparent reason. To be a good refactorer one needs discipline and focus. Now we know that refactoring is all about changing inner workings of existing code. This can be due to performance optimizations, changing internal code workflows or some other reason. This is a typical black box scenario to the outside world. If we upgrade the car engine it still has to drive on the road (preferably faster) and not fly (no matter how cool that would be). Also be aware that white box tests will break when we refactor. What to refactor in a database Refactoring databases doesn’t happen that often but when it does it can include a lot of stuff. Let us look at a few common cases. Adding or removing database schema objects Adding, removing or changing table columns in any way, adding constraints, keys, etc… All of these can be counted as internal changes not visible to the data consumer. But each of these carries a potential input/output behavior change. Dropping a column can result in views not working anymore or stored procedure logic crashing. Adding a unique constraint shows duplicated data that shouldn’t exist. Foreign keys break a truncate table command executed from an application that runs once a month. All these scenarios are very real and can happen. With the proper database abstraction layer fully covered with black box tests we can make sure something like that does not happen (hopefully at all). Changing physical structures Physical structures include heaps, indexes and partitions. We can pretty much add or remove those without changing the data returned by the database. But the performance can be affected. So here we use our performance tests. We do have them, right? Just by adding a single index we can achieve orders of magnitude performance improvement. Won’t that make users happy? But what if that index causes our write operations to crawl to a stop. again we have to test this. There are a lot of things to think about and have tests for. Without tests we can’t do successful refactoring! Fixing bad code We all have some bad code in our systems. We usually refer to that code as code smell as they violate good coding practices. Examples of such code smells are SQL injection, use of SELECT *, scalar UDFs or cursors, etc… Each of those is huge code smell and can result in major code changes. Take SELECT * from example. If we remove a column from a table the client using that SELECT * statement won’t have a clue about that until it runs. Then it will gracefully crash and burn. Not to mention the widely unknown SELECT * view refresh problem that Tomas LaRock (@SQLRockstar on Twitter) and Colin Stasiuk (@BenchmarkIT on Twitter) talk about in detail. Go read about it, it’s informative. Refactoring this includes replacing the * with column names and most likely change to application using the database. Breaking apart huge stored procedures Have you ever seen seen a stored procedure that was 2000 lines long? I have. It’s not pretty. It hurts the eyes and sucks the will to live the next 10 minutes. They are a maintenance nightmare and turn into things no one dares to touch. I’m willing to bet that 100% of time they don’t have a single test on them. Large stored procedures (and functions) are a clear sign that they contain business logic. General opinion on good database coding practices says that business logic has no business in the database. That’s the applications part. Refactoring such behemoths requires writing lots of edge case tests for the stored procedure input/output behavior and then start to refactor it. First we split the logic inside into smaller parts like new stored procedures and UDFs. Those then get called from the master stored procedure. Once we’ve successfully modularized the database code it’s best to transfer that logic into the applications consuming it. This only leaves the stored procedure with common data manipulation logic. Of course this isn’t always possible so having a plethora of performance and behavior unit tests is absolutely necessary to confirm we’ve actually improved the codebase in some way. Refactoring is not a popular chore amongst developers or managers. The former don’t like fixing old code, the latter can’t see the financial benefit. Remember how we talked about being lousy at estimating future costs in the previous post? But there comes a time when it must be done. Hopefully I’ve given you some ideas how to get started. In the last post of the series we’ll take a look at the tools to use and an example of testing and refactoring.

Read the article

Community Outreach - Where Should I Go

- by Roger Brinkley

A few days ago I was talking to person new to community development and they asked me what guidelines I used to determine the worthiness of a particular event. After our conversation was over I thought about it a little bit more and figured out there are three ways to determine if any event (be it conference, blog, podcast or other social medias) is worth doing: Transferability, Multiplication, and Impact. Transferability - Is what I have to say useful to the people that are going to hear it. For instance, consider a company that has product offering that can connect up using a number of languages like Scala, Grovey or Java. Sending a Scala expert to talk about Scala and the product is not transferable to a Java User Group, but a Java expert doing the same talk with a Java slant is. Similarly, talking about JavaFX to any Java User Group meeting in Brazil was pretty much a wasted effort until it was open sourced. Once it was open sourced it was well received. You can also look at transferability in relation to the subject matter that you're dealing with. How transferable is a presentation that I create. Can I, or a technical writer on the staff, turn it into some technical document. Could it be converted into some type of screen cast. If we have a regular podcast can we make a reference to the document, catch the high points or turn it into a interview. Is there a way of using this in the sales group. In other words is the document purely one dimensional or can it be re-purposed in other forms. Multiplication - On every trip I'm looking for 2 to 5 solid connections that I can make with developers. These are long term connections, because I know that once that relationship is established it will lead to another 2 - 5 from that connection and within a couple of years were talking about some 100 connections from just one developer. For instance, when I was working on JavaHelp in 2000 I hired a science teacher with a programming background. We've developed a very tight relationship over the year though we rarely see each other more than once a year. But at this JavaOne, one of his employees came up to me and said, "Richard (Rick Hard in Czech) told me to tell you that he couldn't make it to JavaOne this year but if I saw you to tell you hi". Another example is from my Mobile & Embedded days in Brasil. On our very first FISL trip about 5 years ago there were two university students that had created a project called "Marge". Marge was a Bluetooth framework that made connecting bluetooth devices easier. I invited them to a "Sun" dinner that evening. Originally they were planning on leaving that afternoon, but they changed their plans recognizing the opportunity. Their eyes were as big a saucers when they realized the level of engineers at the meeting. They went home started a JUG in Florianoplis that we've visited more than a couple of times. One of them went to work for Brazilian government lab like Berkley Labs, MIT Lab, John Hopkins Applied Physicas Labs or Lincoln Labs in the US. That presented us with an opportunity to show Embedded Java as a possibility for some of the work they were doing there. Impact - The final criteria is how life changing is what I'm going to say be to the individuals I'm reaching. A t-shirt is just a token, but when I reach down and tug at their developer hearts then I know I've succeeded. I'll never forget one time we flew all night to reach Joan Pasoa in Northern Brazil. We arrived at 2am went immediately to our hotel only to be woken up at 6 am to travel 2 hours by car to the presentation hall. When we arrived we were totally exhausted. Outside the facility there were 500 people lined up to hear 6 speakers for the day. That itself was uplifting. I delivered one of my favorite talks on "I have passion". It was a talk on golf and embedded java development, "Find your passion". When we finished a couple of first year students came up to me and said how much my talk had inspired them. FISL is another great example. I had been about 4 years in a row. FISL is a very young group of developers so capturing their attention is important. Several of the students will come back 2 or 3 years later and ask me questions about research or jobs. And then there's Louis. Louis is one my favorite Brazilians. I can only describe him as a big Brazilian teddy bear. I see him every year at FISL. He works primarily in Java EE but he's attended every single one of my talks over the last 4 years. I can't tell you why, but he always greets me and gives me a hug. For some reason I've had a real impact. And of course when it comes to impact you don't just measure a presentation but every single interaction you have at an event. It's the hall way conversations, the booth conversations, but more importantly it's the conversations at dinner tables or in the cars when you're getting transported to an event. There's a good story that illustrates this. Last year in the spring I was traveling to Goiânia in Brazil. I've been there many times and leaders there no me well. One young man has picked me up at the airport on more than one occasion. We were going out to dinner one evening and he brought his girl friend along. One thing let to another and I eventually asked him, in front of her, "Why haven't you asked her to marry you?" There were all kinds of excuses and she just looked at him and smiled. When I came back in December for JavaOne he came and sought me. "I just want to tell you that I thought a lot about what you said, and I asked her to marry me. We're getting married next Spring." Sometimes just one presentation is all it takes to make an impact. Other times it takes years. Some impacts are directly related to the company and some are more personal in nature. It doesn't matter which it is because it's having the impact that matters.

Read the article

Thoughts on Build 2013

- by D'Arcy Lussier

Originally posted on: http://geekswithblogs.net/dlussier/archive/2013/06/30/153294.aspxAnd so another Build conference has come to an end. Below are my thoughts/perspectives on various aspects of the event. I’ll do a separate blog post on my thoughts of the Build message for developers. The Good Moscone center was a great venue for Build! Easy to get around, easy to get to, and well maintained, it was a very comfortable conference venue. Yeah, the free swag was nice. Build has built up an expectation that attendees will always get something; it’ll be interesting to see how Microsoft maintains this expectation over the next few Build events. I still maintain that free swag should never be the main reason one attends an event, and for me this was definitely just an added bonus. I’m planning on trying to use the Surface as a dedicated 2nd device at work for meetings, I’ll share my experiences over the next few months. The hackathon event was a great idea, although personally I couldn’t justify spending the money on a conference registration just to spend the entire conference coding. Still, the apps that were created were really great and there was a lot of passion and excitement around the hackathon. I wonder if they couldn’t have had the hackathon on the Monday/Tuesday for those that wanted to participate so they didn’t miss any of the actual conference over Wed/Thurs. San Francisco was a great city to host Build. Getting from hotels to the conference center was very easy (well especially for me, I was only 3 blocks away) and the city itself felt very safe. However, if I never have to fly into SFO again I’ll be alright with that! Delays going into and out of SFO and both apparently were due to the airport itself. The Bad Build is one of those oddities on the conference landscape where people will pay to commit to attending an event without knowing anything about the sessions. We got our list of conference sessions when we registered on Tuesday, not before. And even then, we only got titles and not descriptions (those were eventually made available via the conference’s mobile application). I get it…they’re going to make announcements and they don’t want to give anything away through the session titles. But honestly, there wasn’t anything in the session titles that I would have considered a surprise. Breakfasts were brutal. High-carb pastries, donuts, and muffins with fruit and hard boiled eggs does not a conference breakfast make. I can’t believe that the difference between a continental breakfast per person and a hot breakfast buffet would have been a huge impact to a conference fee that was already around $2000. The vendor area was anemic. I don’t know why Microsoft forces the vendors into cookie-cutter booth areas (this year they were all made of plywood material). WPC, TechEd – booth areas there allow the vendors to be creative with their displays. Not so much for Build. Really odd was the lack of Microsoft’s own representation around Bing. In the day 1 keynote Microsoft made a big deal about Bing as an API. Yet there was nobody in the vendor area set up to provide more information or have discussions with about the Bing API. The Ugly Our name badges were NFC enabled. The purpose of this, beyond the vendors being able to scan your info, wasn’t really made clear. An attendee I talked to showed how you could get a reader app on your phone so you can scan other members cards and collect their contact info – which is a kewl idea; business cards are so 1990’s. But I was *shocked* at the amount of information that was on our name badges! Here’s what’s displayed on our name badge: - Name - Company - Twitter Handle I’m ok with that. But here’s what actually gets read: - Name - Company - Address Used for Registration - Phone Number Used for Registration So sharing that info with another attendee, they get way more of my info than just how to find me on Twitter! Microsoft, you need to fix this for the future. If vendors want to collect information on attendees, they should be able to collect an ID from the badge, then get a report with corresponding records afterwards. My personal information should not be so readily available, and without my knowledge! Final Verdict Maybe its my older age, maybe its where I’m at in life with family, maybe its where I’m at in my career, but when I consider whether a conference experience was valuable I get to the core reason I attend: opportunities to learn, opportunities to network, opportunities to engage with Microsoft. Opportunities to Learn: Sessions I attended were generally OK, with some really stand out ones on Day 2. I would love to see Microsoft adopt the Dojo format for a portion of their sessions. Hands On Labs are dull, lecture style sessions are great for information sharing. But a guided hands-on coding session (Read: Dojo) provides the best of both worlds. Being that all content is publically available online to everyone (Build attendee or not), the value of attending the conference sessions is decreased. The value though is in the discussions that take part in person afterwards, which leads to… Opportunities to Network: I enjoyed getting together with old friends and connecting with Twitter friends in person for the first time. I also had an opportunity to meet total strangers. So from a networking perspective, Build was fantastic! I still think it would have been great to have an area for ad-hoc discussions – where speakers could announce they’d be available for more questions after their sessions, or attendees who wanted to discuss more in depth on a topic with other attendees could arrange space. Some people have no problems being outgoing and making these things happen, but others are not and a structured model is more attractive. Opportunities to Engage with Microsoft: Hit and miss on this one. Outside of the vendor area, unless you cornered or reached out to a speaker, there wasn’t any defined way to connect with blue badges. And as I mentioned above, Microsoft didn’t have full representation in the vendor area (no Bing). All in all, Build was a fun party where I was informed about some new stuff and got some free swag. Was it worth the time away from home and the hit to my PD budget? I’d say Somewhat. Build is a great informational conference, but I wouldn’t call it a learning conference. Considering that TechEd seems to be moving to more of an IT Pro focus, independent developer conferences seem to be the best value for those looking to learn and not just be informed. With the rapid development cycle Microsoft is embracing, we’re already seeing Build happening twice within a 12 month period. If that continues, the value of attending Build in person starts to diminish – especially with so much content available online. If Microsoft wants Build to be a must-attend event in the future, they need to start incorporating aspects of Tech Ed, past PDCs, and other conferences so those that want to leave with more than free swag have something to attract them.

Read the article

Visiting the Fire Station in Coromandel

Hm, I just tried to remember how we actually came up with this cool idea... but it's already too blurred and it doesn't really matter after all. Anyway, if I remember correctly (IIRC), it happened during one of the Linux meetups at Mugg & Bean, Bagatelle where Ajay and I brought our children along and we had a brief conversation about how cool it would be to check out one of the fire stations here in Mauritius. We both thought that it would be a great experience and adventure for the little ones. An idea takes shape And there we go, down the usual routine these... having an idea, checking out the options and discussing who's doing what. Except this time, it was all up to Ajay, and he did a fantastic job. End of August, he told me that he got in touch with one of his friends which actually works as a fire fighter at the station in Coromandel and that there could be an option to come and visit them (soon). A couple of days later - Confirmed! Be there, and in time... What time? Anyway, doesn't really matter... Everything was settled and arranged. I asked the kids on Friday afternoon if they might be interested to see the fire engines and what a fire fighter is doing. Of course, they were all in! Getting up early on Sunday morning isn't really a regular exercise for all of us but everything went smooth and after a short breakfast it was time to leave. Where are we going? Are we there yet? Now, we are in Bambous. Why do you go this way? The kids were so much into it. Absolutely amazing to see their excitement. Are we there yet? Well, we went through the sugar cane fields towards Chebel and then down into the industrial zone at Coromandel. Honestly, I had a clue where the fire station is located but having Google Maps in reach that shouldn't be a problem in case that we might get lost. But my worries were washed away when our children guided us... "There! Over there are the fire engines! We have to turn left, dad." - No comment, the kids were right! As we were there a little bit too early, we parked the car and the kids started to explore the area and outskirts of the fire station. Some minutes later, as if we had placed an order a unit of two cars had to go out for an alarm and the kids could witness them leaving as closely as possible. Sirens on and wow!!! Ladder truck L32 - MAN truck with Rosenbauer built-up and equipment by Metz Taking the tour Ajay arrived shortly after that and guided us finally inside the station to meet with his pal. The three guys were absolutely well-prepared and showed us around in the hall, explaining that there two units out at the moment. But the ladder truck (with max. 32m expandable height) was still around we all got a great insight into the technique and equipment on the vehicle. It was amazing to see all three kids listening to Mambo as give some figures about the truck and how the fire fighters are actually it. The children and 'our' fire fighters of the day had great fun with the various fire engines Absolutely fantastic that the children were allowed to experience this - we had so much fun! Ajay's son brought two of his toy fire engines along, shared them with ours, and they all played very well together. As a parent it was really amazing to see them at such an ease. Enough theory Shortly afterwards the ladder truck was moved outside, got stabilised and ready to go for 'real-life' exercising. With the additional equipment of safety helmets, security belts and so on, we all got a first-hand impression about how it could be as a fire-fighter. Actually, I was totally amazed by the curiousity and excitement of my BWE. She was really into it and asked lots of interesting questions - in general but also technical. And while our fighters were busy with Ajay and family, I gave her some more details and explanations about the truck, the expandable ladder, the safety cage at the top and other equipment available. Safety first! No exceptions and always be prepared for the worst case... Also, the equipped has been checked prior to excuse - This is your life saver... Hooked up and ready to go... ...of course not too high. This is just a demonstration - and 32 meters above ground isn't for everyone. Well, after that it was me that had the asking looks on me, and I finally revealed to the local fire fighters that I was in the auxiliary fire brigade, more precisely in the hazard department, for more than 10 years. So not a professional fire fighter but at least a passionate and educated one as them. Inside the station Our fire fighters really took their time to explain their daily job to kids, provided them access to operation seat on the ladder truck and how the truck cabin is actually equipped with the different radios and so on. It was really a great time. Later on we had a brief tour through the building itself, and again all of our questions were answered. We had great fun and started to joke about bits and pieces. For me it was also very interesting to see the comparison between the fire station here in Mauritius and the ones I have been to back in Germany. Amazing to see them completely captivated in the play - the children had lots of fun! Also, that there are currently ten fire stations all over the island, plus two additional but private ones at the airport and at the harbour. The newest one is actually down in Black River on the west coast because the time from Quatre Bornes takes too long to have any chance of an effective alarm at all. IMHO, a very good decision as time is the most important factor in getting fire incidents under control. After all it was great experience for all of us, especially for the children to see and understand that their toy trucks are only copies of the real thing and that the job of a (professional) fire fighter is very important in our society. Don't forget that those guys run into the danger zone while you're trying to get away from it as much as possible. Another unit just came back from a grass fire - and shortly after they went out again. No time to rest, too much to do! Mauritian Fire Fighters now and (maybe) in the future... Thank you! It was an honour to be around! Thank you to Ajay for organising and arranging this Sunday morning event, and of course of Big Thank You to the three guys that took some time off to have us at the Fire Station in Coromandel and guide us through their daily job! And remember to call 115 in case of emergencies!

Read the article

Communities - The importance of exchange and discussion

Communication with your environment is an essential part of everyone's life. And it doesn't matter whether you are actually living in a rural area in the middle of nowhere, within the pulsating heart of a big city, or in my case on a wonderful island in the Indian Ocean. The ability to exchange your thoughts, your experience and your worries with another person helps you to get different points of view and new ideas on how to resolve an issue you might be confronted with. Benefits of community work What happens to be common sense in your daily life, also applies to your work environment. Working in IT, or ICT as it is called in Mauritius, requires a lot of reading and learning. Not only during your lectures at the university but with your colleagues in a project assignment and hopefully with 'unknown' pals in the universe of online communities. At least I can say that I learned quite a lot from other developers code, their responses in various forums, their numerous blog articles, and while attending local user group meetings. When I started to work as a professional software developer (or engineer some may say) years ago I immediately checked the existence of communities on the programming language, the database technology and other vital information on software development in general. Luckily, it wasn't too difficult to find. My employer had a subscription of the monthly magazines and newsletters of a national organisation which also run the biggest forum in that area. Getting in touch with other developers and reading their common problems but also solutions was a huge benefit to my growth. Image courtesy of Michael Kappel (CC BY-NC 2.0) Active participation and regular contribution to this community gave me some nice advantages, too. Within three years I was listed as a conference speaker at the annual developer's conference and provided several sessions on different topics during consecutive years. Back in 2004, I took over the responsibility and management of the monthly meetings of a regional user group, and organised it for more than two years. Furthermore, I was invited to the newly-founded community program of Microsoft Germany (Community Leader/Insider Program - CLIP). My website on Active FoxPro Pages was nominated in the second batch of online communities. Due to my community work and providing advice to others, I had the honour to be awarded as Microsoft Most Valuable Professional (MVP) - Visual Developer for Visual FoxPro in the years 2006 and 2007. It was a great experience to meet with other like-minded people and I'm really grateful for that. Just in case, more details are listed in my Curriculum Vitae. But this all changed when I moved to Mauritius... Cyber island Mauritius? During the first months in Mauritius I was way too busy to think about community activities at all. First of all, there was the new company that had to be set up, the new staff had to be trained and of course the communication work-flows and so on with the project managers back in Germany had to be sorted out, too. Second, I had to get a grip of my private matters like getting the basics for my new household or exploring the neighbourhood, and last but not least I needed a break from the hectic and intensive work prior to my departure. As soon as the sea literally calmed down, I started to have conversations with my colleagues about communities and user groups. Sadly, it turned out that there were none, or at least no one was aware of any at that time. Oh oh, what did I do? Anyway, having this kind of background and very positive experience with off-line and on-line activities I decided for myself that some day I'm going to found a community in Mauritius for all kind of IT/ICT-related fields. The main focus might be on software development but not on a certain technology or methodology. It was clear to me that it should be an open infrastructure and anyone is welcome to join, to experience, to share and to contribute if they would like to. That was the idea at that time... Ok, fast-forward to recent events. At the end of October 2012 I was invited to an event called Open Days organised by Microsoft Indian Ocean Islands together with other local partners and resellers. There I got in touch with local Technical Evangelist Arnaud Meslier and we had a good conversation on communities during the breaks. Eventually, I left a good impression on him, as we are having chats on Facebook or Skype irregularly. Well, seeing that my personal and professional surroundings have been settled and running smooth, having that great exchange and contact with Microsoft IOI (again), and being really eager to re-animate my intentions from 2007, I recently founded a new community: Mauritius Software Craftsmanship Community - #MSCC It took me a while to settle down with the name but it was obvious that the community should not be attached to one single technology, like ie. .NET user group, Oracle developers, or Joomla friends (these are fictitious names). There are several other reasons why I came up with 'Craftsmanship' as the core topic of this community. The expression of 'engineering' didn't feel right with the fields covered. Software development in all kind of facets is a craft, and therefore demands a lot of practice but also guidance from more experienced developers. It also includes the process of designing, modelling and drafting the ideas. Has to deal with various types of tests and test methodologies, and of course should be focused on flexible and agile ways of acting. In order to meet and to excel a customer's request for a solution. Next, I was looking for an easy way to handle the organisation of events and meeting appointments. Using all kind of social media platforms like Google+, LinkedIn, Facebook, Xing, etc. I was never really confident about their features of event handling. More by chance I stumbled upon Meetup.com and in combination with the other entities (G+ Communities, FB Pages or in Groups) I am looking forward to advertise and manage all future activities here: Mauritius Software Craftsmanship Community This is a community for those who care and are proud of what they do. For those developers, regardless how experienced they are, who want to improve and master their craft. This is a community for those who believe that being average is just not good enough. I know, there are not many 'craftsmen' yet but it's a start... Let's see how it looks like by the end of the year. There are free smartphone apps for Android and iOS from Meetup.com that allow you to keep track of meetings and to stay informed on latest updates. And last but not least, there will be a Trello workspace to collect and share ideas and provide downloads of slides, etc. Sharing is caring! As mentioned, the #MSCC is present in various social media networks in order to cover as many people as possible here in Mauritius. Following is an overview of the current networks: Twitter - Latest updates and quickies Google+ - Community channel Facebook - Community Page LinkedIn - Community Group Trello - Collaboration workspace to share and develop ideas Hopefully, this covers the majority of computer-related people in Mauritius. Please spread the word about the #MSCC between your colleagues, your friends and other interested 'geeks'. Your future looks bright Running and participating in a user group or any kind of community usually provides quite a number of advantages for anyone. On the one side it is very joyful for me to organise appointments and get in touch with people that might be interested to present a little demo of their projects or their recent problems they had to tackle down, and on the other side there are lots of companies that have various support programs or sponsorships especially tailored for user groups. At the moment, I already have a couple of gimmicks that I would like to hand out in small contests or raffles during one of the upcoming meetings, and as said, companies provide all kind of goodies, books free of charge, or sometimes even licenses for communities. Meeting other software developers or IT guys also opens up your point of view on the local market and there might be interesting projects or job offers available, too. A community like the Mauritius Software Craftsmanship Community is great for freelancers, self-employed, students and of course employees. Meetings will be organised on a regular basis, and I'm open to all kind of suggestions from you. Please leave a comment here in blog or join the conversations in the above mentioned social networks. Let's get this community up and running, my fellow Mauritians!

Read the article

SQL Sentry First Impressions

- by AjarnMark

After struggling to defend my SQL Servers from a political attack recently, I realized that I needed better tools to back me up, and SQL Sentry is the leading candidate. A couple of weeks ago, seemingly from out of nowhere, complaints from the business users started coming in that one of the core internal applications was running dramatically slower than normal, and fingers were being pointed at the SQL Server. Unfortunately, we don’t have a production DBA whose entire job is to monitor and maintain our SQL Servers. The responsibility falls to me to do the best I can, investing only a small portion of my time, because there are so many other responsibilities to take care of, and our industry is still deep in recession. I inherited these SQL Servers and have made significant improvements in process and procedure, but I had not yet made the time to take real baseline measurements or keep a really close eye on the performance. Like many DBAs, I wrote several of my own tools and used the “built-in tools” like Profiler, PerfMon, and sp_who2 (did I mention most of our instances are SQL Server 2000?). These have all served me well for in-the-moment troubleshooting and maintenance, but they really fell down on the job when I was called upon to “prove” that SQL Server performance was acceptable and more importantly had not degraded recently (i.e. historical comparisons). I really didn’t have anything from a historical comparison perspective, but I was able to show that current performance was acceptable, and deflect attention back onto other components (which in fact turned out to be the real culprit). That experience dramatically illustrated the need for better monitoring tools. Coincidentally, I had been talking recently to my boss about the mini nightmare of monitoring several critical and interdependent overnight jobs that operate on separate instances of SQL Server. Among other tools, I had been using Idera’s SQL Job Manager which is a free tool and did a nice job of showing me job schedules and histories in a nice calendar view. This worked fairly well, and for the money (did I mention it was free?) it couldn’t be beat. But it is based on the stored job history in MSDB, and there were other performance problems that we ran into when we started changing the settings for how much job history to retain, in order to be able to look back a month or more in the calendar view. Another coincidence (if you believe in such things) was that when we had some of those performance challenges, I posted a couple of questions to the #sqlhelp hashtag on Twitter and Greg Gonzalez (@SQLSensei) suggested I check out SQL Sentry’s Event Manager. At the time, I just thought he worked there, but later found out that he founded the company. When I took a quick look at the features & benefits, the one that really jumped out at me is Chaining and Queueing which sounded like it would really help with our “interdependent jobs on different servers” issue. I know that is a lot of background story and coincidences, but hopefully you have stuck with me so far, and now we have arrived at the point where last week I downloaded and installed the 30-day trial of the SQL Sentry Power Suite, which is Event Manager plus Performance Advisor. And I must say that I really like what I see so far. Here are a few highlights: Great Support. I had two issues getting the trial setup and monitoring a handful of our servers. One of which was entirely my fault (missed a security setting in SQL 2008) and the other was mostly my fault (late change to some config settings that were apparently cached and did not get refreshed properly). In both cases, the support staff at SQL Sentry were very responsive and rather quickly figured out what the cause and fix was for each of them. This left me with a great impression of the company. Kudos to them! Chaining and Queueing. While I have not yet activated this feature, I am very excited about the possibilities. We have jobs on three different instances of SQL Server that have to be run in a certain order, and each has to finish before the next can successfully begin, and I believe this feature will ensure just that. It has been a real pain in the backside when one of those jobs runs just a little too long and does not finish before the job on another instance starts, thus triggering a chain reaction of either outright job failures, or worse, successful completion of completely invalid processing. Calendar View. I really, really like the Event Manager calendar view where I can see all jobs and events across all instances and identify potential resource contention as well as windows of opportunity for maintenance activity. Very well done, and based on Event Manager’s own database of accumulated historical information rather than querying the source instances every time. Performance Advisor Dashboard History View. This view let’s me quickly select a date and time range and it displays graphs of key SQL Server and Windows metrics. This is exactly the thing I needed to answer the “has performance changed recently” question at the beginning of this post. Reporting Services Subscription Jobs with Report Name. This was a big and VERY pleasant surprise. If you have ever looked at the list of SQL Server jobs that SQL Server Reporting Services creates when you make a Subscription, you will notice that they all have some sort of GUID as the name of the job. This is really ugly, and really annoying because when you are just looking at the SQL Agent and Job Activity Monitor, if you see that Job X failed, you really do not have any indication in the name or the properties of the Job itself, as to what Report that was for. But with SQL Sentry Event Manager you do. The Jobs list in the Navigator pane in SQL Sentry, amazingly, displays the name of the Report that the Subscription Job is for. And when you open it to see more details, it shows you the full Reporting Services path to that Report, so you can immediately track it down in the Report Manager in case you want to identify/notify the owner or edit the Subscription information. I did not expect this at all, but I sure do like it. HOORAY! That is just my first impressions from using the tools for a few days. And I haven’t even gotten into how it showed me where I was completely mistaken about one aspect of my SQL Server disk configurations. I’ll share that lesson in another blog entry. But I have to say it again, the combination of Event Manager and Performance Advisor working together have really made me a fan.

Read the article

Turning on collision crashes game

- by MomentumGaming

I am getting a null pointer excecption to both my sprite and level. I am working on my mob class, and when I try to move him and the move function is called, the game crashes after checking collision with a null pointer excecption. Taking out the one line that actually checks if the tile located in front of it fixes the problem. Also, if i keep collision ON but don't move the position of the mob (the spider) the game works fine. I will have collision, and the spider appears on the screen, only problem is, getting it to move causes this nasty error that i just can't fix. true Exception in thread "Display" java.lang.NullPointerException at com.apcompsci.game.entity.mob.Mob.collision(Mob.java:67) at com.apcompsci.game.entity.mob.Mob.move(Mob.java:38) at com.apcompsci.game.entity.mob.spider.update(spider.java:58) at com.apcompsci.game.level.Level.update(Level.java:55) at com.apcompsci.game.Game.update(Game.java:128) at com.apcompsci.game.Game.run(Game.java:106) at java.lang.Thread.run(Unknown Source) Here is my renderMob mehtod: public void renderMob(int xp,int yp,Sprite sprite,int flip) { xp -= xOffset; yp-=yOffset; for(int y = 0; y<32; y++) { int ya = y + yp; int ys = y; if(flip == 2||flip == 3)ys = 31-y; for(int x = 0; x<32; x++) { int xa = x + xp; int xs = x; if(flip == 1||flip == 3)xs = 31-x; if(xa < -32 || xa >=width || ya<0||ya>=height) break; if(xa<0) xa =0; int col = sprite.pixels[xs+ys*32]; if(col!= 0x000000) pixels[xa+ya*width] = col; } } } My spider class which determines the sprite and where I control movement, also rendering the spider onto the screen, when I increment ya to move the sprite, I get the crash, but without ya++, it runs flawlessly with a spider sprite on screen: package com.apcompsci.game.entity.mob; import com.apcompsci.game.entity.mob.Mob.Direction; import com.apcompsci.game.graphics.Screen; import com.apcompsci.game.graphics.Sprite; import com.apcompsci.game.level.Level; public class spider extends Mob{ Direction dir; private Sprite sprite; private boolean walking; public spider(int x, int y) { this.x = x <<4; this.y = y <<4; sprite = sprite.spider_forward; } public void update() { int xa = 0, ya = 0; ya++; if(ya<0) { sprite = sprite.spider_forward; dir = Direction.UP; } if(ya>0) { sprite = sprite.spider_back; dir = Direction.DOWN; } if(xa<0) { sprite = sprite.spider_side; dir = Direction.LEFT; } if(xa>0) { sprite = sprite.spider_side; dir = Direction.LEFT; } if(xa!= 0 || ya!= 0) { System.out.println("true"); move(xa,ya); walking = true; } else{ walking = false; } } public void render(Screen screen) { screen.renderMob(x, y, sprite, 0); } } This is th mob class that contains the move() method that is called in the spider class above. This move method calls the collision method. tile and sprite comes up null in the debugger: package com.apcompsci.game.entity.mob; import java.util.ArrayList; import java.util.List; import com.apcompsci.game.entity.Entity; import com.apcompsci.game.entity.projectile.DemiGodProjectile; import com.apcompsci.game.entity.projectile.Projectile; import com.apcompsci.game.graphics.Sprite; public class Mob extends Entity{ protected Sprite sprite; protected boolean moving = false; protected enum Direction { UP,DOWN,LEFT,RIGHT } protected Direction dir; public void move(int xa,int ya) { if(xa != 0 && ya != 0) { move(xa,0); move(0,ya); return; } if(xa>0) dir = Direction.RIGHT; if(xa<0) dir = Direction.LEFT; if(ya>0)dir = Direction.DOWN; if(ya<0)dir = Direction.UP; if(!collision(xa,ya)){ x+= xa; y+=ya; } } public void update() { } public void shoot(int x, int y, double dir) { //dir = Math.toDegrees(dir); Projectile p = new DemiGodProjectile(x, y,dir); level.addProjectile(p); } public boolean collision(int xa,int ya) { boolean solid = false; for(int c = 0; c<4; c++) { int xt = ((x+xa) + c % 2 * 14 - 8 )/16; int yt = ((y+ya) + c / 2 * 12 +3 )/16; if(level.getTile(xt, yt).solid()) solid = true; } return solid; } public void render() { } } Finally, here is the method in which i call the add() method for the spider to add it to the level: protected void loadLevel(String path) { try{ BufferedImage image = ImageIO.read(SpawnLevel.class.getResource(path)); int w = width =image.getWidth(); int h = height = image.getHeight(); tiles = new int[w*h]; image.getRGB(0, 0, w,h, tiles,0, w); } catch(IOException e){ e.printStackTrace(); System.out.println("Exception! Could not load level file!"); } add(new spider(20,45)); } I don't think i need to include the level class but just in case, I have provided a gistHub link for better context. It contains all of the full classes listed above , plus my entity class and maybe another. Thanks for the help if you decide to do so, much appreciated! Also, please tell me if i'm in the wrong section of stackeoverflow, i figured that since this is the gamign section that it belonged but debugging code normally goes into the general section.

Read the article

Agile Testing Days 2012 – Day 3 – Agile or agile?

- by Chris George

Another early start for my last Lean Coffee of the conference, and again it was not wasted. We had some really interesting discussions around how to determine what test automation is useful, if agile is not faster, why do it? and a rather existential discussion on whether unicorns exist! First keynote of the day was entitled “Fast Feedback Teams” by Ola Ellnestam. Again this relates nicely to the releasing faster talk on day 2, and something that we are looking at and some teams are actively trying. Introducing the notion of feedback, Ola describes a game he wrote for his eldest child. It was a simple game where every time he clicked a button, it displayed “You’ve Won!”. He then changed it to be a Win-Lose-Win-Lose pattern and watched the feedback from his son who then twigged the pattern and got his younger brother to play, alternating turns… genius! (must do that with my children). The idea behind this was that you need that feedback loop to learn and progress. If you are not getting the feedback you need to close that loop. An interesting point Ola made was to solve problems BEFORE writing software. It may be that you don’t have to write anything at all, perhaps it’s a communication/training issue? Perhaps the problem can be solved another way. Writing software, although it’s the business we are in, is expensive, and this should be taken into account. He again mentions frequent releases, and how they should be made as soon as stuff is ready to be released, don’t leave stuff on the shelf cause it’s not earning you anything, money or data. I totally agree with this and it’s something that we will be aiming for moving forwards. “Exceptions, Assumptions and Ambiguity: Finding the truth behind the story” by David Evans started off very promising by making references to ‘Grim up North’ referring to the north of England. Not sure it was appreciated by most of the audience, but it made me laugh! David explained how there are always risks associated with exceptions, giving the example of a one-way road near where he lives, with an exception sign giving rights to coaches to go the wrong way. Therefore you could merrily swing around the corner of the one way road straight into a coach! David showed the danger in making assumptions with lyrical quotes from Lola by The Kinks “I’m glad I’m a man, and so is Lola” and with a picture of a toilet flush that needed instructions to operate the full and half flush. With this particular flush, you pulled the handle all the way down to half flush, and half way down to full flush! hmmm, a bit of a crappy user experience methinks! Then through a clever use of a passage from the Jabberwocky, David then went onto show how mis-translation/ambiguity is the can completely distort the original meaning of something, and this is a real enemy of software development. This was all helping to demonstrate that the term Story is often heavily overloaded in the Agile world, and should really be stripped back to what it is really for, stating a business problem, and offering a technical solution. Therefore a story could be worded as “In order to {make some improvement}, we will { do something}”. The first ‘in order to’ statement is stakeholder neutral, and states the problem through requesting an improvement to the software/process etc. The second part of the story is the verb, the doing bit. So to achieve the ‘improvement’ which is not currently true, we will do something to make this true in the future. My PM is very interested in this, and he’s observed some of the problems of overloading stories so I’m hoping between us we can use some of David’s suggestions to help clarify our stories better. The second keynote of the day (and our last) proved to be the most entertaining and exhausting of the conference for me. “The ongoing evolution of testing in agile development” by Scott Barber. I’ve never had the pleasure of seeing Scott before… OMG I would love to have even half of the energy he has! What struck me during this presentation was Scott’s explanation of how testing has become the role/job that it is (largely) today, and how this has led to the need for ‘methodologies’ to make dev and test work! The argument that we should be trying to converge the roles again is a very valid one, and one that a couple of the teams at work are actively doing with great results. Making developers as responsible for quality as testers is something that has been lost over the years, but something that we are now striving to achieve. The idea that we (testers) should be testing experts/specialists, not testing ‘union members’, supports this idea so the entire team works on all aspects of a feature/product, with the ‘specialists’ taking the lead and advising/coaching the others. This leads to better propagation of information around the team, a greater holistic understanding of the project and it allows the team to continue functioning if some of it’s members are off sick, for example. Feeling somewhat drained from Scott’s keynote (but at the same time excited that alot of the points he raised supported actions we are taking at work), I headed into my last presentation for Agile Testing Days 2012 before having to make my way to Tegel to catch the flight home. “Thinking and working agile in an unbending world” with Pete Walen was a talk I was not going to miss! Having spoken to Pete several times during the past few days, I was looking forward to hearing what he was going to say, and I was not disappointed. Pete started off by trying to separate the definitions of ‘Agile’ as in the methodology, and ‘agile’ as in the adjective by pronouncing them the ‘english’ and ‘american’ ways. So Agile pronounced (Ajyle) and agile pronounced (ajul). There was much confusion around what the hell he was talking about, although I thought it was quite clear. Agile – Software development methodology agile – Marked by ready ability to move with quick easy grace; Having a quick resourceful and adaptable character. Anyway, that aside (although it provided a few laughs during the presentation), the point was that many teams that claim to be ‘Agile’ but are not, in fact, ‘agile’ by nature. Implementing ‘Agile’ methodologies that are so prescriptive actually goes against the very nature of Agile development where a team should anticipate, adapt and explore. Pete made a valid point that very few companies intentionally put up roadblocks to impede work, so if work is being blocked/delayed, why? This is where being agile as a team pays off because the team can inspect what’s going on, explore options and adapt their processes. It is through experimentation (and that means trying and failing as well as trying and succeeding) that a team will improve and grow leading to focussing on what really needs to be done to achieve X. So, that was it, the last talk of our conference. I was gutted that we had to miss the closing keynote from Matt Heusser, as Matt was another person I had spoken too a few times during the conference, but the flight would not wait, and just as well we left when we did because the traffic was a nightmare! My Takeaway Triple from Day 3: Release often and release small – don’t leave stuff on the shelf Keep the meaning of the word ‘agile’ in mind when working in ‘Agile Look at testing as more of a skill than a role

Search Results

Search found 38274 results on 1531 pages for 'getting started'.

Page 603/1531 | < Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610 | Next Page >

- by Mark Virtue

- by Pinal Dave

- by pinaldave

- by hajan

- by Christie Flanagan

- by Matthew Guay

- by mbcrump

- by Matthew Guay

- by psheriff

- by Jeff Taylor-Oracle

- by cj

- by Jeff

- by Rob Farley

- by Yashwinder

- by Pinal Dave

- by cartaysm

- by Scott McNeil

- by Mladen Prajdic

- by Roger Brinkley

- by D'Arcy Lussier

- by AjarnMark

- by MomentumGaming

- by Chris George

< Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610 | Next Page >