Search Results

Search found 16731 results on 670 pages for 'memory limit'.

Page 603/670 | < Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >

• Porting Symbian C++ to Android NDK

  - by Donal Rafferty

  I've been given some Symbian C++ code to port over for use with the Android NDK. The code has lots of Symbian specific code in it and I have very little experience of C++ so its not going very well. The main thing that is slowing me down is trying to figure out the alternatives to use in normal C++ for the Symbian specific code. At the minute the compiler is throwing out all sorts of errors for unrecognised types. From my recent research these are the types that I believe are Symbian specific: TInt, TBool, TDesc8, RSocket, TInetAddress, TBuf, HBufc, RPointerArray Changing TInt and TBool to int and bool respectively works in the compiler but I am unsure what to use for the other types? Can anyone help me out with them? Especially TDesc, TBuf, HBuf. Also Symbian has a two phase contructor using NewL and NewLc But would changing this to a normal C++ constructor be ok? Finally Symbian uses the clean up stack to help eliminate memory leaks I believe, would removing the clean up stack code be acceptable, I presume it should be replaced with try/catch statements?

  Read the article

• Isn't an Iterator in c++ a kind of a pointer?

  - by Bilthon

  Ok this time I decided to make a list using the STL. I need to create a dedicated TCP socket for each client. So everytime I've got a connection, I instantiate a socket and add a pointer to it on a list. list<MyTcp*> SocketList; //This is the list of pointers to sockets list<MyTcp*>::iterator it; //An iterator to the list of pointers to TCP sockets. Putting a new pointer to a socket was easy, but now every time the connection ends I should disconnect the socket and delete the pointer so I don't get a huge memory leak, right? well.. I thought I was doing ok by setting this: it=SocketList.begin(); while( it != SocketList.end() ){ if((*it)->getClientId() == id){ pSocket = it; // <-------------- compiler complains at this line SocketList.remove(pSocket); pSocket->Disconnect(); delete pSocket; break; } } But the compiler is saying this: error: invalid cast from type ‘std::_List_iterator<MyTcp*>’ to type ‘MyTcp*’ Can someone help me here? i thought I was doing things right, isn't an iterator at any given time just pointing to one of the elements of the set? how can I fix it?

  Read the article

• Elegant and 'correct' multiton implementation in Objective C?

  - by submachine

  Would you call this implementation of a multiton in objective-c 'elegant'? I have programmatically 'disallowed' use of alloc and allocWithZone: because the decision to allocate or not allocate memory needs to be done based on a key. I know for sure that I need to work with only two instances, so I'm using 'switch-case' instead of a map. #import "Multiton.h" static Multiton *firstInstance = nil; static Multiton *secondInstance = nil; @implementation Multiton + (Multiton *) sharedInstanceForDirection:(char)direction { return [[self allocWithKey:direction] init]; } + (id) allocWithKey:(char)key { return [self allocWithZone:nil andKey:key]; } + (id)allocWithZone:(NSZone *)zone andKey:(char)key { Multiton **sharedInstance; @synchronized(self) { switch (key) { case KEY_1: sharedInstance = &firstInstance; break; case KEY_2: sharedInstance = &secondInstance; break; default: [NSException raise:NSInvalidArgumentException format:@"Invalid key"]; break; } if (*sharedInstance == nil) *sharedInstance = [super allocWithZone:zone]; } return *sharedInstance; } + (id) allocWithZone:(NSZone *)zone { //Do not allow use of alloc and allocWithZone [NSException raise:NSObjectInaccessibleException format:@"Use allocWithZone:andKey: or allocWithKey:"]; return nil; } - (id) copyWithZone:(NSZone *)zone { return self; } - (id) retain { return self; } - (unsigned) retainCount { return NSUIntegerMax; } - (void) release { return; } - (id) autorelease { return self; } - (id) init { [super init]; return self; } PS: I've not tried out if this works as yet, but its compiling cleanly :)

  Read the article

• R Tree 50,000 foot overview?

  - by roufamatic

  I'm working on a school project that involves taking a lat/long point and finding the top five closest points in a known list of places. The list is to be stored in memory, with the caveat that we must choose an "appropriate data structure" -- that is, we cannot simply store all the places in an array and compare distances one-by-one in a linear fashion. The teacher suggested grouping the place data by US State to prevent calculating the distance for places that are obviously too far away. I think I can do better. From my research online it seems like an R-Tree or one of its variants might be a neat solution. Unfortunately, that sentence is as far as I've gotten with understanding the actual technique, as the literature is simply too dense for my non-academic head. Can somebody give me a really high overview of what the process is for populating an R-Tree with lat/long data, and then traversing the tree to find those 5 nearest neighbors of a given point? Additionally the project is in C, and I don't have to reinvent the wheel on this, so if you've used an existing open source C implementation of an R Tree I'd be interested in your experiences.

  Read the article

• Assigning Object to View, big MySQL resultset.

  - by A Finn

  Hello (Sorry for my bad English) Is it bad practice to assign object to view and call its methods in there? I use smarty as my template engine. In my controller I could do like this 1# $this->view->assign("name", $this->model->getName); and in my view <p>{$name}</p> OR 2# $this->view->assign("Object", $this->model); and in my view <p>{$Report->getName()}</p> Well my biggest problem is that I have to handle a big amount of data coming out from the MySQL and I thought that if I would made a method that would print out the data while looping mysql_fetch_row. Well at least I know that using html-tags in the model is a bad thing to do. So I would assign the object to the view to get the result to the right position on the page.. Reading a mysql-result to an array first may cause memory problems am I right? So what is the solution doing things MVC style.. And yes Im using a framework of my own.

  Read the article

• Is it possible to load an entire SQL Server CE database into RAM?

  - by DanM

  I'm using LinqToSql to query a small SQL Server CE database. I've noticed that any operations involving sub-properties are disappointingly slow. For example, if I have a Customer table that is referenced by an Order table via a foreign key, LinqToSql will automatically create an EntitySet<Order> property. This is a nice convenience, allowing me to do things like Customer.Order.Where(o => o.ProductName = "Stopwatch"), but for some reason, SQL Server CE hangs up pretty bad when I try to do stuff like this. One of my queries, which isn't really that complicated takes 3-4 seconds to complete. I can get the speed up to acceptable, even fast, if I just grab the two tables individually and convert them to List<Customer> and List<Order>, then join then manually with my own query, but this is throwing out a lot of the appeal of LinqToSql. So, I'm wondering if I can somehow get the whole database into RAM and just query that way, then occasionally save it. Is this possible? How? If not, is there anything else I can do to boost the performance? Note: My database in its initial state is about 250K and I don't expect it to grow to more than 1-2Mb. So, loading the data into RAM certainly wouldn't be a problem from a memory point of view.

  Read the article

• Time taken for memcpy decreases after certain point

  - by tss

  I ve a code which increases the size of the memory(identified by a pointer) exponentially. Instead of realloc, I use malloc followed by memcpy.. Something like this.. int size=5,newsize; int *c = malloc(size*sizeof(int)); int *temp; while(1) { newsize=2*size; //begin time temp=malloc(newsize*sizeof(int)); memcpy(temp,c,size*sizeof(int)); //end time //print time in mili seconds c=temp; size=newsize; } Thus the number of bytes getting copied is increasing exponentially. The time required for this task also increases almost linearly with the increase in size. However after certain point, the time taken abruptly reduces to a very small value and then remains constant. I recorded time for similar code, copyin data(Of my own type) 5 -> 10 - 2 ms 10 -> 20 - 2 ms . . 2560 -> 5120 - 5 ms . . 20480 -> 40960 - 30 ms 40960 -> 91920 - 58 ms 367680 -> 735360 - 2 ms 735360 -> 1470720 - 2 ms 1470720 -> 2941440 - 2 ms What is the reason for this drop in time ? Does a more optimal memcpy method get called when the size is large ?

  Read the article

• Which way to store this data is effective?

  - by Tattat

  I am writing a game, which need a map, and I want to store the map. The first thing I can think of, is using a 2D-array. But the problem is what data should I store in the 2D-array. The player can tap different place to have different reaction. So, I am thinking store a 2D-array with objects, when player click some position, and I find it in the array, and use the object in that array to execute a cmd. But I have a concern that storing lots of object may use lots of memory. So, I am think storing char/int only. But it seems that not enough for me. I want to store the data like that: { Type:1 Color:Green } No matter what color is, if they are all type 1, the have same reactions in logic, but the visual effect is based on the color. So, it is not easy to store using a prue char/int data, unless I make something like this: 1-5 --> all type 1. 1=color green , 2=color red, 3 = color yellow.... ... 6-10 --> all type 2. 2 = color green, 2 = color red ... ... So, do you have any ideas on how to minimize the ram use, but also easy for me to read... ...thx

  Read the article

• FileNotFoundExcecption while inserting image into SDCard.

  - by Are

  Hi, I want to insert images into my SDCard.So I used below code m_cImagePath = "/sdcard/"+ String.format("%d.jpg", System.currentTimeMillis()); FileOutputStream lObjOutStream = null; try { lObjOutStream = new FileOutputStream(m_cImagePath); if (null != lObjOutStream && null != finalBitmap) { finalBitmap.compress(Bitmap.CompressFormat.JPEG, 85, lObjOutStream); lObjOutStream.close(); }catch(FileNotFoundException fe){ fe.printStackTrace(); } Sometimes it is giving FileNotFoundException even my SDCard had memory.When I remove some images from sdcard again it is working smoothly.Why this Happend?How can i know that file is inserted successfully in SDCard and Is there any functionality in Java1.5 to know available space of the SDCard like java 1.6?How can i know file length which is not before inserting into the SDCard(I searched in google and found that "when the file is not physically there then file.length() always gives 0" ).But before inserting i want to know the length of the file.Then Comparing this space to available SDCard space is simple. Note :I had an idea to use Unix command df sdcard using in Runtime class to found SDCard space. Please give me an idea in this problem. Regards, Android Developer

  Read the article

• Outlook VSTO AddIn for Meetings

  - by BigDubb

  We have created a VSTO addin for Outlook Meetings. As part of this we trap on the SendEvent of the message on the FormRegionShowing event: _apptEvents.Send += new Microsoft.Office.Interop.Outlook.ItemEvents_SendEventHandler(_apptEvents_Send); The method _apptEvents_Send then tests on a couple of properties and exits where appropriate. private void _apptEvents_Send(ref bool Cancel) { if (!_Qualified) { MessageBox.Show("Meeting has not been qualified", "Not Qualified Meeting", MessageBoxButtons.OK, MessageBoxIcon.Information); chkQualified.Focus(); Cancel = true; } } The problem that we're having is that some users' messages get sent twice. Once when the meeting is sent and a second time when the user re-opens outlook. I've looked for memory leaks, thinking that something might not be getting disposed of properly, and have added explicit object disposal on all finally calls to try and make sure resources are managed, but still getting the functionality incosistently across the organization. i.e. I never encountered the problem during development, nor other developers during testing. All users are up to date on framework (3.5 SP1) and Hotfixes for Outlook. Does anyone have any ideas on what might be causing this? Any ideas anyone might have would be greatly appreciated.

  Read the article

• transferring binary files between systems

  - by tim

  Hi guys I'm trying to transfer my files between 2 UNIX clusters, the data is pure numeric (vectors of double) in binary form. Unfortunately one of the systems is IBM ppc997 and the other is AMD Opteron, It seems the format of binary numbers in these systems are different. I have tried 3 ways till now: 1- Changed my files to ASCII format (i.e. saved a number at each line in a text file), sent them to the destination and changed them again to binary on the target system (they both are UNIX, no end of line character difference??!) 2- Sent pure binaries to the destination 3- used uuencode sent them to the destination and decoded them Unfortunately any of these methods does not work (my code in the destination system generates garbage, while it works on the first system, I'm 100% sure the code itself is portable). I don't know what else I can do? Do you have any idea? I'm not a professional, please don't use computer scientists terminology! And: my codes are in C, so by binary I mean a one to one mapping between memory and hard disk. Thanks

  Read the article

• Fast serialization/deserialization of structs

  - by user256890

  I have huge amont of geographic data represented in simple object structure consisting only structs. All of my fields are of value type. public struct Child { readonly float X; readonly float Y; readonly int myField; } public struct Parent { readonly int id; readonly int field1; readonly int field2; readonly Child[] children; } The data is chunked up nicely to small portions of Parent[]-s. Each array contains a few thousands Parent instances. I have way too much data to keep all in memory, so I need to swap these chunks to disk back and forth. (One file would result approx. 2-300KB). What would be the most efficient way of serializing/deserializing the Parent[] to a byte[] for dumpint to disk and reading back? Concerning speed, I am particularly interested in fast deserialization, write speed is not that critical. Would simple BinarySerializer good enough? Or should I hack around with StructLayout (see accepted answer)? I am not sure if that would work with array field of Parent.children. UPDATE: Response to comments - Yes, the objects are immutable (code updated) and indeed the children field is not value type. 300KB sounds not much but I have zillions of files like that, so speed does matter.

  Read the article

• Doesn't (didn't) Scala have automatically generated setters?

  - by Malvolio

  Google and my failing memory are both giving me hints that it does, but every attempt is coming up dry. class Y { var y = 0 } var m = new Y() m.y_(3) error: value y_ is not a member of Y Please tell me I am doing something wrong. (Also: please tell me what it is I am doing wrong.) EDIT The thing I am not doing wrong, or at least not the only thing I am doing wrong, is the way I am invoking the setter. The following things also fail, all with the same error message: m.y_ // should be a function valued expression m.y_ = (3) // suggested by Google and by Mchl f(m.y_) // where f takes Int => Unit as an argument f(m.y) // complains that I am passing in Int not a function I am doing this all through SimplyScala, because I'm too lazy and impatient to set up Scala on my tiny home machine. Hope it isn't that... And the winner is ... Fabian, who pointed out that I can't have a space between the _ and the =. I thought out why this should be and then it occurred to me: The name of the setter for y is not y_, it is y_= ! Observe: class Y { var y = 0 } var m = new Y() m.y_=(3) m.y res1: Int = 3 m.y_= error: missing arguments for method y_= in class Y; follow this method with `_` if you want to treat it as a partially applied function m.y_= ^ m.y_=_ res2: (Int) => Unit = def four(f : Int => Unit) = f(4) four(m.y_=) m.y res3: Int = 4 Another successful day on StackExchange.

  Read the article

• What happens when modifying Gemfile.lock directly?

  - by Mik378

  Since the second time of bundle install execution, dependencies are loaded from Gemfile.lock when Gemfile isn't changed. But I wonder how detection of changes is made between those two files. For instance, if I'm adding a new dependency directly into Gemfile.lock without adding it into Gemfile (as opposed to the best practice since Gemfile.lock is auto-generated from Gemfile), would a bundle install consider Gemfile as changed ? Indeed, does bundle install process compares the whole Gemfile and Gemfile.lock trees in order to detect changes? If it is, even if I'm adding a dependency directly to Gemfile.lock, Gemfile would be detected as changed (since different) and would re-erase Gemfile.lock (so losing the added dependency...) What is the process of bundle install since the launch for the second time ? To be more clear, my question is: Are changes based only from Gemfile ? That means bundler would keep a Gemfile snapshot of every bundle install execution number N and merely compares it to the bundle install execution N+1 ? Or none snapshot are created in bundler memory and bundler makes a comparison with Gemfile.lock each time to detect if Gemfile must be considered as changed.

  Read the article

• Transaction within a Transaction in C#

  - by Rosco

  I'm importing a flat file of invoices into a database using C#. I'm using the TransactionScope to roll back the entire operation if a problem is encountered. It is a tricky input file, in that one row does not necessary equal one record. It also includes linked records. An invoice would have a header line, line items, and then a total line. Some of the invoices will need to be skipped, but I may not know it needs to be skipped until I reach the total line. One strategy is to store the header, line items, and total line in memory, and save everything once the total line is reached. I'm pursuing that now. However, I was wondering if it could be done a different way. Creating a "nested" transaction around the invoice, inserting the header row, and line items, then updating the invoice when the total line is reached. This "nested" transaction would roll back if it is determined the invoice needs to be skipped, but the overall transaction would continue. Is this possible, practical, and how would you set this up?

  Read the article

• What was your "aha moment" in understanding delegates?

  - by CM90

  Considering the use of delegates in C#, does anyone know if there is a performance advantage or if it is a convenience to the programmer? If we are creating an object that holds a method, it sounds as if that object would be a constant in memory to be called on, instead of loading the method every time it is called. For example, if we look at the following Unity3D-based code: public delegate H MixedTypeDelegate<G, H>(G g) public class MainParent : MonoBehaviour // Most Unity classes inherit from M.B. { public static Vector3 getPosition(GameObject g) { /* GameObject is a Unity class, and Vector3 is a struct from M.B. The "position" component of a GameObject is a Vector3. This method takes the GameObject I pass to it & returns its position. */ return g.transform.position; } public static MixedTypeDelegate<GameObject, Vector3> PositionOf; void Awake( ) // Awake is the first method called in Unity, always. { PositionOf = MixedTypeDelegate<GameObject, Vector3>(getPosition); } } public class GameScript : MainParent { GameObject g = new GameObject( ); Vector3 whereAmI; void Update( ) { // Now I can say: whereAmI = PositionOf(g); // Instead of: whereAmI = getPosition(g); } } . . . But that seems like an extra step - unless there's that extra little thing that it helps. I suppose the most succinct way to ask a second question would be to say: When you had your aha moment in understanding delegates, what was the context/scenario/source? Thank you!

  Read the article

• "for" loop from program 7.6 from Kochan's "Programming in Objective-C"

  - by Mr_Vlasov

  "The sigma notation is shorthand for a summation. Its use here means to add the values of 1/2^i, where i varies from 1 to n. That is, add 1/2 + 1/4 + 1/8 .... If you make the value of n large enough, the sum of this series should approach 1. Let’s experiment with different values for n to see how close we get." #import "Fraction.h" int main (int argc, char *argv[]) { NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init]; Fraction *aFraction = [[Fraction alloc] init]; Fraction *sum = [[Fraction alloc] init], *sum2; int i, n, pow2; [sum setTo: 0 over: 1]; // set 1st fraction to 0 NSLog (@"Enter your value for n:"); scanf ("%i", &n); pow2 = 2; for (i = 1; i <= n; ++i) { [aFraction setTo: 1 over: pow2]; sum2 = [sum add: aFraction]; [sum release]; // release previous sum sum = sum2; pow2 *= 2; } NSLog (@"After %i iterations, the sum is %g", n, [sum convertToNum]); [aFraction release]; [sum release]; [pool drain]; return 0; } Question: Why do we have to create additional variable sum2 that we are using in the "for" loop? Why do we need "release previous sum" here and then again give it a value that we just released? : sum2 = [sum add: aFraction]; [sum release]; // release previous sum sum = sum2; Is it just for the sake of avoiding memory leakage? (method "add" initializes a variable that is stored in sum2)

  Read the article

• Extra NotifyIcon shown in system tray

  - by Kettch19

  I'm having an issue with an app where my NotifyIcon displays an extra icon. The steps to reproduce it are easy, but the problem is that the extra icon shows up after any of the actual codebehind we've added fires. Put simply, clicking a button triggers execution of method FooBar() which runs all the way through fine but its primary duty is to fire a backgroundworker to log into another of our apps. It only appears if this particular button is clicked. Strangely enough, we have a WndProc method override and if I step through until the extra NotifyIcon appears, it always appears during this method so something else beyond the codebehind must be triggering the behavior. Our WndProc method is currently (although I don't think it's caused by the WndProc): Protected Overrides Sub WndProc(ByRef m As System.Windows.Forms.Message) 'Check for WM_COPYDATA message from other app or drag/drop action and handle message If m.Msg = NativeMethods.WM_COPYDATA Then ' get the standard message structure from lparam Dim CD As NativeMethods.COPYDATASTRUCT = m.GetLParam(GetType(NativeMethods.COPYDATASTRUCT)) 'setup byte array Dim B(CD.cbData) As Byte 'copy data from memory into array Runtime.InteropServices.Marshal.Copy(New IntPtr(CD.lpData), B, 0, CD.cbData) 'Get message as string and process ProcessWMCopyData(System.Text.Encoding.Default.GetString(B)) 'empty array Erase B 'set message result to 'true', meaning message handled m.Result = New IntPtr(1) End If 'pass on result and all messages not handled by this app MyBase.WndProc(m) End Sub The only place in the code where the NotifyIcon in question is manipulated at all is in the following event handler (again, don't think this is the culprit, but just for more info): Private Sub TrayIcon_MouseDoubleClick(ByVal sender As System.Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles TrayIcon.MouseDoubleClick If Me.Visible Then Me.Hide() Else PositionBottomRight() Me.Show() End If End Sub The backgroundworker's DoWork is as follows (just a class call to log in to our other app, but again just for info): Private Sub LoginBackgroundWorker_DoWork(ByVal sender As Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles LoginBackgroundWorker.DoWork Settings.IsLoggedIn = _wdService.LogOn(Settings.UserName, Settings.Password) End Sub Does anyone else have ideas on what might be causing this or how to possibly further debug this? I've been banging my head on this without seeing a pattern so another set of eyes would be extremely appreciated. :) I've posted this on MSDN winforms forums as well and have had no luck there so far either.

  Read the article

• Optimized 2D Tile Scrolling in OpenGL

  - by silicus

  Hello, I'm developing a 2D sidescrolling game and I need to optimize my tiling code to get a better frame rate. As of right now I'm using a texture atlas and 16x16 tiles for 480x320 screen resolution. The level scrolls in both directions, and is significantly larger than 1 screen (thousands of pixels). I use glTranslate for the actual scrolling. So far I've tried: Drawing only the on-screen tiles using glTriangles, 2 per square tile (too much overhead) Drawing the entire map as a Display List (great on a small level, way to slow on a large one) Partitioning the map into Display Lists half the size of the screen, then culling display lists (still slows down for 2-directional scrolling, overdraw is not efficient) Any advice is appreciated, but in particular I'm wondering: I've seen Vertex Arrays/VBOs suggested for this because they're dynamic. What's the best way to take advantage of this? If I simply keep 1 screen of vertices plus a bit of overdraw, I'd have to recopy the array every few frames to account for the change in relative coordinates (shift everything over and add the new rows/columns). If I use more overdraw this doesn't seem like a big win; it's like the half-screen display list idea. Does glScissor give any gain if used on a bunch of small tiles like this, be it a display list or a vertex array/VBO Would it be better just to build the level out of large textures and then use glScissor? Would losing the memory saving of tiling be an issue for mobile development if I do this (just curious, I'm currently on a PC)? This approach was mentioned here Thanks :)

  Read the article

• How do I efficiently parse a CSV file in Perl?

  - by Mike

  I'm working on a project that involves parsing a large csv formatted file in Perl and am looking to make things more efficient. My approach has been to split() the file by lines first, and then split() each line again by commas to get the fields. But this suboptimal since at least two passes on the data are required. (once to split by lines, then once again for each line). This is a very large file, so cutting processing in half would be a significant improvement to the entire application. My question is, what is the most time efficient means of parsing a large CSV file using only built in tools? note: Each line has a varying number of tokens, so we can't just ignore lines and split by commas only. Also we can assume fields will contain only alphanumeric ascii data (no special characters or other tricks). Also, i don't want to get into parallel processing, although it might work effectively. edit It can only involve built-in tools that ship with Perl 5.8. For bureaucratic reasons, I cannot use any third party modules (even if hosted on cpan) another edit Let's assume that our solution is only allowed to deal with the file data once it is entirely loaded into memory. yet another edit I just grasped how stupid this question is. Sorry for wasting your time. Voting to close.

  Read the article

• Drawing line graphics leads Flash to spiral out of control!

  - by drpepper

  Hi, I'm having problems with some AS3 code that simply draws on a Sprite's Graphics object. The drawing happens as part of a larger procedure called on every ENTER_FRAME event of the stage. Flash neither crashes nor returns an error. Instead, it starts running at 100% CPU and grabs all the memory that it can, until I kill the process manually or my computer buckles under the pressure when it gets up to around 2-3 GB. This will happen at a random time, and without any noticiple slowdown beforehand. WTF? Has anyone seen anything like this? PS: I used to do the drawing within a MOUSE_MOVE event handler, which brought this problem on even faster. PPS: I'm developing on Linux, but reproduced the same problem on Windows. UPDATE: You asked for some code, so here we are. The drawing function looks like this: public static function drawDashedLine(i_graphics : Graphics, i_from : Point, i_to : Point, i_on : Number, i_off : Number) : void { const vecLength : Number = Point.distance(i_from, i_to); i_graphics.moveTo(i_from.x, i_from.y); var dist : Number = 0; var lineIsOn : Boolean = true; while(dist < vecLength) { dist = Math.min(vecLength, dist + (lineIsOn ? i_on : i_off)); const p : Point = Point.interpolate(i_from, i_to, 1 - dist / vecLength); if(lineIsOn) i_graphics.lineTo(p.x, p.y); else i_graphics.moveTo(p.x, p.y); lineIsOn = !lineIsOn; } } and is called like this (m_graphicsLayer is a Sprite): m_graphicsLayer.graphics.clear(); if (m_destinationPoint) { m_graphicsLayer.graphics.lineStyle(2, m_fixedAim ? 0xff0000 : 0x333333, 1); drawDashedLine(m_graphicsLayer.graphics, m_initialPos, m_destinationPoint, 10, 10); }

  Read the article

• Why do I get "request for member in something not a struct or union" from this code?

  - by pyroxene

  I'm trying to teach myself C by coding up a linked list. I'm new to pointers and memory management and I'm getting a bit confused. I have this code: /* Remove a node from the list and rejiggle the pointers */ void rm_node(struct node **listP, int index) { struct node *prev; struct node *n = *listP; if (index == 0) { *listP = *listP->next; free(n); return; } for (index; index > 0; index--) { n = n->next; if (index == 2) { prev = n; } } prev->next = n->next; free(n); } to remove an element from the list. If I want to remove the first node, I still need some way of referring to the list, which is why the listP arg is a double pointer, so it can point to the first element of the list and allow me to free the node that used to be the head. However, when I try to dereference listP to access the pointer to the next node, the compiler tells me error: request for member ‘next’ in something not a structure or union . What am I doing wrong here? I think I might be hopelessly mixed up..?

  Read the article

• Is programming overrated?

  - by aengine

  [Subjective and intended to be a community wiki] I am sorry for such an offensive question: But here are my arguments Most of the progress in "computing" has came from non-programming sources. i.e. People invented faster microprocessors and better routers and novel memory devices. I dont think on average people are writting more efficient programs than those written 10 years ago. And the newer and popular languages are infact slower than C. though speed is one of the lesser criterias. Most of the progress came from novel paradigms. Web, Internet, Cloud computing and Social networking are novel paradigms and did not involve progress in programming as such. Heck even facebook was written in PHP and not some extreme language. Though it did face scalability issues (same with twitter) but i believe money and better programmers (who came in much later) took care of that. Thus ideating capability trumped programming capability/ Even things like Map-Reduce, Column oriented database and Probablistic algorithms (E.g. bloom filters) came from hardcore Algorithms research, rather than some programming convention. Thus my final point is why programming skill is so overstressed? To point a recent example about how only 10% of programmers can "write code" (binary search) without debugging. Isnt it a bit hypocritical, considering your real successs lies in coming up with better algorithm or a novel feature rather than getting right first time???

  Read the article

• std::map keys in C++

  - by Soumava

  I have a requirement to create two different maps in C++. The Key is of type CHAR * and the Value is a pointer to a struct. I am filling 2 maps with these pairs, in separate iterations. After creating both maps I need find all such instances in which the value of the string referenced by the CHAR * are same. For this i am using the following code : typedef struct _STRUCTTYPE { .. } STRUCTTYPE, *PSTRUCTTYPE; typedef pair {CHAR *,PSTRUCTTYPE} kvpair; .. CHAR *xyz; PSTRUCTTYPE abc; after filling the information; Map.insert (kvpair(xyz,abc)); the above is repeated x times for the first map, and y times for the second map. after both are filled out; std::map {CHAR *, PSTRUCTTYPE} :: iterator Iter,findIter; for (Iter=iteratedMap-begin();Iter!=iteratedMap-end();mapIterator++) { char *key = Iter-first; printf("%s\n",key); findIter=otherMap-find(key); //printf("%u",findIter-second); if (findIter!=otherMap-end()) { printf("Match!\n"); } } The above code does not show any match, although the list of keys in both maps show obvious matches. My understanding is that the equals operator for CHAR * just equates the memory address of the pointers. My question is, what should i do to alter the equals operator for this type of key or could I use a different datatype for the string? *note : {} has been used instead of angle brackets as the content inside angle brackets was not showing up in the post.

  Read the article

• Does IE completely ignore cache control headers for AJAX requests?

  - by Joshua Hayworth

  Hello there, I've got, what I would consider, a simple test web site. A single page with a single button. Here is a copy of the source I'm working with if you would like to download it and play with it. When that button is clicked, it creates a JavaScript timer that executes once a second. When the timer function is executed, An AJAX call is made to retrieve a text value. That text value is then placed into the DOM. What's my problem? IE Caching. Crack open Task Manager and watch what happens to the iexplorer.exe process (IE 8.0.7600.16385 for me) while the timer in that page is executing. See the memory and handle count getting larger? Why is that happening when, by all accounts, I have caching turned off. I've got the jQuery cache option set to false in $.ajaxSetup. I've got the CacheControl header set to no-cache and no-store. The Expires header is set to DateTime.Now.AddDays(-1). The headers are set in both the page code-behind as well as the HTTP Handler's response. Anybody got any ideas as to how I could prevent IE from caching the results of the AJAX call? Here is what the iexplorer.exe process looks like in ProcessMonitor. I believe that the activity shown in this picture is exactly what I'm attempting to prevent.

  Read the article

< Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >