Search Results

Search found 37616 results on 1505 pages for 'model driven development'.

Page 603/1505 | < Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >

  • Android Bitmap : collision Detecting [on hold]

    - by user2505374
    I am writing an Android game right now and I would need some help in the collision of the wall on screen. When I drag the ball in the top and right it able to collide in wall but when I drag it faster it was able to overlap in the wall. public boolean onTouchEvent(MotionEvent event) { int x = (int) event.getX(); int y = (int) event.getY(); switch (event.getAction()) { // if the player moves case MotionEvent.ACTION_MOVE: { if (playerTouchRect.contains(x, y)) { boolean left = false; boolean right = false; boolean up = false; boolean down = false; boolean canMove = false; boolean foundFinish = false; if (x != pLastXPos) { if (x < pLastXPos) { left = true; } else { right = true; } pLastXPos = x; } if (y != pLastYPos) { if (y < pLastYPos) { up = true; } else { down = true; } pLastYPos = y; } plCellRect = getRectFromPos(x, y); newplRect.set(playerRect); newplRect.left = x - (int) (playerRect.width() / 2); newplRect.right = x + (int) (playerRect.width() / 2); newplRect.top = y - (int) (playerRect.height() / 2); newplRect.bottom = y + (int) (playerRect.height() / 2); int currentRow = 0; int currentCol = 0; currentRow = getRowFromYPos(newplRect.top); currentCol = getColFromXPos(newplRect.right); if(!canMove){ canMove = mapManager.getCurrentTile().pMaze[currentRow][currentCol] == Cell.wall; canMove =true; } finishTest = mapManager.getCurrentTile().pMaze[currentRow][currentCol]; foundA = finishTest == Cell.valueOf(letterNotGet + ""); canMove = mapManager.getCurrentTile().pMaze[currentRow][currentCol] != Cell.wall; canMove = (finishTest == Cell.floor || finishTest == Cell.pl) && canMove; if (canMove) { invalidate(); setTitle(); } if (foundA) { mapManager.getCurrentTile().pMaze[currentRow][currentCol] = Cell.floor; // finishTest letterGotten.add(letterNotGet); playCurrentLetter(); /*sounds.play(sExplosion, 1.0f, 1.0f, 0, 0, 1.5f);*/ foundS = letterNotGet == 's'; letterNotGet++; }if(foundS){ AlertDialog.Builder builder = new AlertDialog.Builder(mainActivity); builder.setTitle(mainActivity.getText(R.string.finished_title)); LayoutInflater inflater = mainActivity.getLayoutInflater(); View view = inflater.inflate(R.layout.finish, null); builder.setView(view); View closeButton =view.findViewById(R.id.closeGame); closeButton.setOnClickListener(new OnClickListener() { @Override public void onClick(View clicked) { if(clicked.getId() == R.id.closeGame) { mainActivity.finish(); } } }); AlertDialog finishDialog = builder.create(); finishDialog.show(); } else { Log.d(TAG, "INFO: updated player position"); playerRect.set(newplRect); setTouchZone(); updatePlayerCell(); } } // end of (CASE) if playerTouch break; } // end of (SWITCH) Case motion }//end of Switch return true; }//end of TouchEvent private void finish() { // TODO Auto-generated method stub } public int getColFromXPos(int xPos) { val = xPos / (pvWidth / mapManager.getCurrentTile().pCols); if (val == mapManager.getCurrentTile().pCols) { val = mapManager.getCurrentTile().pCols - 1; } return val; } /** * Given a y pixel position, return the row of the cell it is in This is * used when determining the type of adjacent Cells. * * @param yPos * y position in pixels * @return The cell this position is in */ public int getRowFromYPos(int yPos) { val = yPos / (pvHeight / mapManager.getCurrentTile().pRows); if (val == mapManager.getCurrentTile().pRows) { val = mapManager.getCurrentTile().pRows - 1; } return val; } /** * When preserving the position we need to know which cell the player is in, * so calculate it from the centre on its Rect */ public void updatePlayerCell() { plCell.x = (playerRect.left + (playerRect.width() / 2)) / (pvWidth / mapManager.getCurrentTile().pCols); plCell.y = (playerRect.top + (playerRect.height() / 2)) / (pvHeight / mapManager.getCurrentTile().pRows); if (mapManager.getCurrentTile().pMaze[plCell.y][plCell.x] == Cell.floor) { for (int row = 0; row < mapManager.getCurrentTile().pRows; row++) { for (int col = 0; col < mapManager.getCurrentTile().pCols; col++) { if (mapManager.getCurrentTile().pMaze[row][col] == Cell.pl) { mapManager.getCurrentTile().pMaze[row][col] = Cell.floor; break; } } } mapManager.getCurrentTile().pMaze[plCell.y][plCell.x] = Cell.pl; } } public Rect getRectFromPos(int x, int y) { calcCell.left = ((x / cellWidth) + 0) * cellWidth; calcCell.right = calcCell.left + cellWidth; calcCell.top = ((y / cellHeight) + 0) * cellHeight; calcCell.bottom = calcCell.top + cellHeight; Log.d(TAG, "Rect: " + calcCell + " Player: " + playerRect); return calcCell; } public void setPlayerRect(Rect newplRect) { playerRect.set(newplRect); } private void setTouchZone() { playerTouchRect.set( playerRect.left - playerRect.width() / TOUCH_ZONE, playerRect.top - playerRect.height() / TOUCH_ZONE, playerRect.right + playerRect.width() / TOUCH_ZONE, playerRect.bottom + playerRect.height() / TOUCH_ZONE); } public Rect getPlayerRect() { return playerRect; } public Point getPlayerCell() { return plCell; } public void setPlayerCell(Point cell) { plCell = cell; }

    Read the article

  • Drawing a sprite or text causes the OpenGl rendering to 'disappear' in SFML

    - by Ken
    I'm using some SFML built in functions to draw sprites and text as an overlay on top of some OpenGL rending in an SFML RenderWindow. The opengl rendering appears fine until I add the code to draw the sprites or text. The sprite or text drawing causes the OpenGL stuff to disappear. The follow code show what I'm trying to do sf::RenderWindow window(sf::VideoMode(viewport.width,viewport.height,32), "SFML Window"); glMatrixMode(GL_PROJECTION); glLoadIdentity(); glOrtho(0,viewport.width,0,viewport.height,0,1); while (window.pollEvent(Event)) { //event handling... //begin drawing glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glBegin(GL_TRIANGLES); glColor3f(col.x,col.y,col.z); for(int i=0;i<3;i++) glVertex2f(pos.x+verts[i].x,pos.y+verts[i].y); glEnd(); // adding this line causes all the previous opengl triangles not to appear window.draw("Sometext"); window.display(); }

    Read the article

  • JOGL2 test compiles, but doesn't execute - help?

    - by Chuchinyi
    I have a problem with JOGL2. My JOGL2Template.java compiles fine, but executing it results in the following error: D:\java\java\jogl>javac JOGL2Template.java <== compile ok D:\java\java\jogl>java JOGL2Template <== execute error Exception in thread "main" java.lang.ExceptionInInitializerError at javax.media.opengl.GLProfile.<clinit>(GLProfile.java:1176) at JOGL2Template.<init>(JOGL2Template.java:24) at JOGL2Template.main(JOGL2Template.java:57) Caused by: java.lang.SecurityException: no certificate for gluegen-rt.dll in D:\ java\lib\gluegen-rt-natives-windows-i586.jar at com.jogamp.common.util.JarUtil.validateCertificate(JarUtil.java:350) at com.jogamp.common.util.JarUtil.validateCertificates(JarUtil.java:324) at com.jogamp.common.util.cache.TempJarCache.validateCertificates(TempJa rCache.java:328) at com.jogamp.common.util.cache.TempJarCache.bootstrapNativeLib(TempJarC ache.java:283) at com.jogamp.common.os.Platform$3.run(Platform.java:308) at java.security.AccessController.doPrivileged(Native Method) at com.jogamp.common.os.Platform.loadGlueGenRTImpl(Platform.java:298) at com.jogamp.common.os.Platform.<clinit>(Platform.java:207) ... 3 more Here is the JOGL2Template.java source code: import java.awt.Dimension; import java.awt.Frame; import java.awt.event.WindowAdapter; import java.awt.event.WindowEvent; import javax.media.opengl.GLAutoDrawable; import javax.media.opengl.GLCapabilities; import javax.media.opengl.GLEventListener; import javax.media.opengl.GLProfile; import javax.media.opengl.awt.GLCanvas; import com.jogamp.opengl.util.FPSAnimator; import javax.swing.JFrame; /* * JOGL 2.0 Program Template For AWT applications */ public class JOGL2Template extends JFrame implements GLEventListener { private static final int CANVAS_WIDTH = 640; // Width of the drawable private static final int CANVAS_HEIGHT = 480; // Height of the drawable private static final int FPS = 60; // Animator's target frames per second // Constructor to create profile, caps, drawable, animator, and initialize Frame public JOGL2Template() { // Get the default OpenGL profile that best reflect your running platform. GLProfile glp = GLProfile.getDefault(); // Specifies a set of OpenGL capabilities, based on your profile. GLCapabilities caps = new GLCapabilities(glp); // Allocate a GLDrawable, based on your OpenGL capabilities. GLCanvas canvas = new GLCanvas(caps); canvas.setPreferredSize(new Dimension(CANVAS_WIDTH, CANVAS_HEIGHT)); canvas.addGLEventListener(this); // Create a animator that drives canvas' display() at 60 fps. final FPSAnimator animator = new FPSAnimator(canvas, FPS); addWindowListener(new WindowAdapter() { // For the close button @Override public void windowClosing(WindowEvent e) { // Use a dedicate thread to run the stop() to ensure that the // animator stops before program exits. new Thread() { @Override public void run() { animator.stop(); System.exit(0); } }.start(); } }); add(canvas); pack(); setTitle("OpenGL 2 Test"); setVisible(true); animator.start(); // Start the animator } public static void main(String[] args) { new JOGL2Template(); } @Override public void init(GLAutoDrawable drawable) { // Your OpenGL codes to perform one-time initialization tasks // such as setting up of lights and display lists. } @Override public void display(GLAutoDrawable drawable) { // Your OpenGL graphic rendering codes for each refresh. } @Override public void reshape(GLAutoDrawable drawable, int x, int y, int w, int h) { // Your OpenGL codes to set up the view port, projection mode and view volume. } @Override public void dispose(GLAutoDrawable drawable) { // Hardly used. } } Any ideas what might be the cause of these errors?

    Read the article

  • How to make an object move again after being stopped by collision in Unity?

    - by Matthew Underwood
    I have a player object which position is always centered on the main camera's viewport. This object has a Rigidbody 2D, a box and circle collider. The player moves around a level, the level has a polygon collider attached. I move the camera until the object hits against the collider, which stops the movement of the camera by setting its speed to 0. The problem happens when I want to move the camera / player object away from the collider. As the speed is already at 0, it cannot move away from the collider. The script attached to the player object, checks for collisions and applies the speed to 0 on the main camera's test script. using UnityEngine; using System.Collections; public class move : MonoBehaviour { public float speed; public test testing; // Use this for initialization void Start () { speed = 10F; testing = Camera.main.GetComponent<test>(); } // Update is called once per frame void FixedUpdate () { Vector3 p = Camera.main.ViewportToWorldPoint(new Vector3(0.5F, 0.5F, Camera.main.nearClipPlane)); transform.position = new Vector3(p.x, p.y, -1); } void OnCollisionEnter2D(Collision2D col) { testing.speed = 0; } void OnCollisionExit2D(Collision2D col) { testing.speed = 10F; } } This is the script attached to the main camera; just a simple script that changes the camera's position. using UnityEngine; using System.Collections; public class test : MonoBehaviour { public float speed; public float translationY; public float translationX; // Use this for initialization void Start () { speed = 10F; } void FixedUpdate () { translationY = Input.GetAxis("Vertical") * speed * Time.deltaTime; translationX = Input.GetAxis("Horizontal") * speed * Time.deltaTime; transform.Translate(translationX, translationY, 0); } } The player object isn't kinematic and is a fixed angle, the colliders aren't triggers and the polygon collider isn't a trigger either. The player is the red square, the collider is the pink area. -- EDIT -- From the latest change the collider set up for the player So if the X speed was disabled. It wouldnt move into the side of the polygon colider which is good, but yet you couldnt move away from it. And moving down would move inside the colider.

    Read the article

  • Calculating vertex normals on the GPU

    - by Etan
    I have some height-map sampled on a regular grid stored in an array. Now, I want to use the normals on the sampled vertices for some smoothing algorithm. The way I'm currently doing it is as follows: For each vertex, generate triangles to all it's neighbours. This results in eight neighbours when using the 1-neighbourhood for all vertices except at the borders. +---+---+ ¦ \ ¦ / ¦ +---o---+ ¦ / ¦ \ ¦ +---+---+ For each adjacent triangle, calculate it's normal by taking the cross product between the two distances. As the triangles all have the same size when projected on the xy-plane, I simply average over all eight normals then and store it for this vertex. However, as my data grows larger, this approach takes too much time and I would prefer doing it on the GPU in a shader code. Is there an easy method, maybe if I could store my height-map as a texture?

    Read the article

  • Struct Method for Loops Problem

    - by Annalyne
    I have tried numerous times how to make a do-while loop using the float constructor for my code but it seems it does not work properly as I wanted. For summary, I am making a TBRPG in C++ and I encountered few problems. But before that, let me post my code. #include <iostream> #include <string> #include <ctime> #include <cstdlib> using namespace std; int char_level = 1; //the starting level of the character. string town; //town string town_name; //the name of the town the character is in. string charname; //holds the character's name upon the start of the game int gems = 0; //holds the value of the games the character has. const int MAX_ITEMS = 15; //max items the character can carry string inventory [MAX_ITEMS]; //the inventory of the character in game int itemnum = 0; //number of items that the character has. bool GameOver = false; //boolean intended for the game over scr. string monsterTroop [] = {"Slime", "Zombie", "Imp", "Sahaguin, Hounds, Vampire"}; //monster name float monsterTroopHealth [] = {5.0f, 10.0f, 15.0f, 20.0f, 25.0f}; // the health of the monsters int monLifeBox; //life carrier of the game's enemy troops int enemNumber; //enemy number //inventory[itemnum++] = "Sword"; class RPG_Game_Enemy { public: void enemyAppear () { srand(time(0)); enemNumber = 1+(rand()%3); if (enemNumber == 1) cout << monsterTroop[1]; //monster troop 1 else if (enemNumber == 2) cout << monsterTroop[2]; //monster troop 2 else if (enemNumber == 3) cout << monsterTroop[3]; //monster troop 3 else if (enemNumber == 4) cout << monsterTroop[4]; //monster troop 4 } void enemDefeat () { cout << "The foe has been defeated. You are victorious." << endl; } void enemyDies() { //if the enemy dies: //collapse declaration cout << "The foe vanished and you are victorious!" << endl; } }; class RPG_Scene_Battle { public: RPG_Scene_Battle(float ini_health) : health (ini_health){}; float getHealth() { return health; } void setHealth(float rpg_val){ health = rpg_val;}; private: float health; }; //---------------------------------------------------------------// // Conduct Damage for the Scene Battle's Damage //---------------------------------------------------------------// float conductDamage(RPG_Scene_Battle rpg_tr, float damage) { rpg_tr.setHealth(rpg_tr.getHealth() - damage); return rpg_tr.getHealth(); }; // ------------------------------------------------------------- // void RPG_Scene_DisplayItem () { cout << "Items: \n"; for (int i=0; i < itemnum; ++i) cout << inventory[i] <<endl; }; In this code I have so far, the problem I have is the battle scene. For example, the player battles a Ghost with 10 HP, when I use a do while loop to subtract the HP of the character and the enemy, it only deducts once in the do while. Some people said I should use a struct, but I have no idea how to make it. Is there a way someone can display a code how to implement it on my game? Edit: I made the do-while by far like this: do RPG_Scene_Battle (player, 20.0f); RPG_Scene_Battle (enemy, 10.0f); cout << "Battle starts!" <<endl; cout << "You used a blade skill and deducted 2 hit points to the enemy!" conductDamage (enemy, 2.0f); while (enemy!=0) also, I made something like this: #include <iostream> using namespace std; int gems = 0; class Entity { public: Entity(float startingHealth) : health(startingHealth){}; // initialize health float getHealth(){return health;} void setHealth(float value){ health = value;}; private: float health; }; float subtractHealthFrom(Entity& ent, float damage) { ent.setHealth(ent.getHealth() - damage); return ent.getHealth(); }; int main () { Entity character(10.0f); Entity enemy(10.0f); cout << "Hero Life: "; cout << subtractHealthFrom(character, 2.0f) <<endl; cout << "Monster Life: "; cout << subtractHealthFrom(enemy, 2.0f) <<endl; cout << "Hero Life: "; cout << subtractHealthFrom(character, 2.0f) <<endl; cout << "Monster Life: "; cout << subtractHealthFrom(enemy, 2.0f) <<endl; }; Struct method, they say, should solve this problem. How can I continously deduct hp from the enemy? Whenever I deduct something, it would return to its original value -_-

    Read the article

  • How do I set an event off when player is on certain tile?

    - by Tom Burman
    Here is the code I use to create and print my map to the canvas: var board = []; function loadMap(map) { if (map == 1) { return [ [2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,3,0,3,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,3,3,3,3,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,3,0,0,2], [2,0,0,0,0,0,0,3,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,3,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,3,3,0,0,0,0,3,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,3,3,0,0,3,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,3,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,3,0,3,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,3,3,3,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,3,3,3,3,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,3,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,3,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,3,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,3,3,3,3,3,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,3,3,0,0,3,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,3,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,3,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,3,3,3,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,3,0,0,0,0,0,0,0,0,3,3,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,3,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,3,3,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,3,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,3,3,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,3,3,3,3,3,3,3,3,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,3,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,3,3,3,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,3,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2], [2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2] ]; } } board = loadMap(1); enterfor (y = 0; y <= viewHeight; y++) { for (x = 0; x <= viewWidth; x++) { var theX = x * 32; var theY = y * 32; context.drawImage(mapTiles[board[y+viewY][x+viewX]], theX, theY, 32, 32); } } And here is the code I use for player movement: canvas.addEventListener('keydown', function(e) { console.log(e); var key = null; switch (e.which) { case 37: // Left if (playerX > 0) playerX--; break; case 38: // Up if (playerY > 0) playerY--; break; case 39: // Right if (playerX < worldWidth) playerX++; break; case 40: // Down if (playerY < worldHeight) playerY++; break; } viewX = playerX - Math.floor(0.5 * viewWidth); if (viewX < 0) viewX = 0; if (viewX+viewWidth > worldWidth) viewX = worldWidth - viewWidth; viewY = playerY - Math.floor(0.5 * viewHeight); if (viewY < 0) viewY = 0; if (viewY+viewHeight > worldHeight) viewY = worldHeight - viewHeight; }, false); What I am looking for is a method for when the player lands on tile 3 he loses health. I have tried to use this in the player movement but it doesnt seem to work e.g the left movement: case 37: // Left if (playerX > 0) playerX--; if(board[x2 - 1] == 3) { health--; playerX--; }

    Read the article

  • What tools should I consider if my strategy is to make a game available to as many platforms as possible?

    - by Kenji Kina
    We're planning on developing a 2D, grid-based puzzle game, and although it's still very early in the planning stages, we'd like to make our decisions well from the beginning. Our strategy will be to make the game available to as many platforms as possible, for example PCs (Windows, Mac and/or Linux), mobile phones (iPhone and/or Android based phones), game consoles (XBLA and/or PSN) PC will have an emphasis, but I believe that's the most flexible platform so that shouldn't be a problem. So, what programming language, game engine, frameworks and all around tools would be best suited for our goal? P.S.: I'm betting a set of tools won't cover ALL of them, and that there will still be some kind of "translating" effort for some platforms, but we'd like to know what the most far reaching are.

    Read the article

  • How to do a multishot in xna?

    - by DeVonte
    I am trying to simulate a gun in which shoots multiple bullets at the same time(similar to a spread out shot). I am thinking I have to create another bullet array then do the same as I have below but in a different direction. Here is what I have so far: foreach (GameObject bullet in bullets) { // Find a bullet that isn't alive if (!bullet.alive) { //And set it to alive bullet.alive = true; if (flip == SpriteEffects.FlipHorizontally) //Facing right { float armCos = (float)Math.Cos(arm.rotation - MathHelper.PiOver2); float armSin = (float)Math.Sin(arm.rotation - MathHelper.PiOver2); // Set the initial position of our bullets at the end of our gun arm // 42 is obtained by taking the width of the Arm_Gun texture / 2 // and subtracting the width of the Bullet texture / 2. ((96/2)=(12/2)) bullet.position = new Vector2( arm.position.X + 42 * armCos, arm.position.Y + 42 * armSin); // And give it a velocity of the direction we're aiming. // Increae/decrease speed by changeing 15.0f bullet.Velocity = new Vector2( (float)Math.Cos(arm.rotation - MathHelper.PiOver4 + MathHelper.Pi + MathHelper.PiOver2), (float)Math.Sin(arm.rotation - MathHelper.PiOver4 + MathHelper.Pi + MathHelper.PiOver2)) * 15.0f; } else //Facing left { float armCos = (float)Math.Cos(arm.rotation + MathHelper.PiOver2); float armSin = (float)Math.Sin(arm.rotation + MathHelper.PiOver2); //Set the initial position of our bullet at the end of our gun arm //42 is obtained be taking the width of the Arm_Gun texture / 2 //and subtracting the width of the Bullet texture / 2. ((96/2)-(12/2)) bullet.position = new Vector2( arm.position.X - 42 * armCos, arm.position.Y - 42 * armSin); //And give it a velocity of the direction we're aiming. //Increase/decrease speed by changing 15.0f bullet.Velocity = new Vector2( -armCos, -armSin) * 15.0f; } return; }// End if }// End foreach

    Read the article

  • 2-d lighting day/night cycle

    - by Richard
    Off the back of this post in which I asked two questions and received one answer, which I accepted as a valid answer. I have decided to re-ask the outstanding question. I have implemented light points with shadow casting as shown here but I would like an overall map light with no point/light source. The map setup is a top-down 2-d 50X50 pixel grid. How would I go about implementing a day/night cycle lighting across a map?

    Read the article

  • HLSL: Pack 4 values into 32 bit float.

    - by TheBigO
    I can't find any useful information on packing 4 values into a 32 bit float in HLSL. Ideally, what I want to be able to do in HLSL is: float4 values = ... // Some values where each component is between 0 and 1. float packedValues = pack32R(values); float4 values2 = unpack32R(packedValues); I realize that there will be precision limitations, and performance tradeoffs between different precisions in different methods. I'm just wondering what ideas are out there.

    Read the article

  • Quaternion LookAt for camera

    - by Homar
    I am using the following code to rotate entities to look at points. glm::vec3 forwardVector = glm::normalize(point - position); float dot = glm::dot(glm::vec3(0.0f, 0.0f, 1.0f), forwardVector); float rotationAngle = (float)acos(dot); glm::vec3 rotationAxis = glm::normalize(glm::cross(glm::vec3(0.0f, 0.0f, 1.0f), forwardVector)); rotation = glm::normalize(glm::quat(rotationAxis * rotationAngle)); This works fine for my usual entities. However, when I use this on my Camera entity, I get a black screen. If I flip the subtraction in the first line, so that I take the forward vector to be the direction from the point to my camera's position, then my camera works but naturally my entities rotate to look in the opposite direction of the point. I compute the transformation matrix for the camera and then take the inverse to be the View Matrix, which I pass to my OpenGL shaders: glm::mat4 viewMatrix = glm::inverse( cameraTransform->GetTransformationMatrix() ); The orthographic projection matrix is created using glm::ortho. What's going wrong?

    Read the article

  • Multithreading 2D gravity calculations

    - by Postman
    I'm building a space exploration game and I've currently started working on gravity ( In C# with XNA). The gravity still needs tweaking, but before I can do that, I need to address some performance issues with my physics calculations. This is using 100 objects, normally rendering 1000 of them with no physics calculations gets well over 300 FPS (which is my FPS cap), but any more than 10 or so objects brings the game (and the single thread it runs on) to its knees when doing physics calculations. I checked my thread usage and the first thread was killing itself from all the work, so I figured I just needed to do the physics calculation on another thread. However when I try to run the Gravity.cs class's Update method on another thread, even if Gravity's Update method has nothing in it, the game is still down to 2 FPS. Gravity.cs public void Update() { foreach (KeyValuePair<string, Entity> e in entityEngine.Entities) { Vector2 Force = new Vector2(); foreach (KeyValuePair<string, Entity> e2 in entityEngine.Entities) { if (e2.Key != e.Key) { float distance = Vector2.Distance(entityEngine.Entities[e.Key].Position, entityEngine.Entities[e2.Key].Position); if (distance > (entityEngine.Entities[e.Key].Texture.Width / 2 + entityEngine.Entities[e2.Key].Texture.Width / 2)) { double angle = Math.Atan2(entityEngine.Entities[e2.Key].Position.Y - entityEngine.Entities[e.Key].Position.Y, entityEngine.Entities[e2.Key].Position.X - entityEngine.Entities[e.Key].Position.X); float mult = 0.1f * (entityEngine.Entities[e.Key].Mass * entityEngine.Entities[e2.Key].Mass) / distance * distance; Vector2 VecForce = new Vector2((float)Math.Cos(angle), (float)Math.Sin(angle)); VecForce.Normalize(); Force = Vector2.Add(Force, VecForce * mult); } } } entityEngine.Entities[e.Key].Position += Force; } } Yeah, I know. It's a nested foreach loop, but I don't know how else to do the gravity calculation, and this seems to work, it's just so intensive that it needs its own thread. (Even if someone knows a super efficient way to do these calculations, I'd still like to know how I COULD do it on multiple threads instead) EntityEngine.cs (manages an instance of Gravity.cs) public class EntityEngine { public Dictionary<string, Entity> Entities = new Dictionary<string, Entity>(); public Gravity gravity; private Thread T; public EntityEngine() { gravity = new Gravity(this); } public void Update() { foreach (KeyValuePair<string, Entity> e in Entities) { Entities[e.Key].Update(); } T = new Thread(new ThreadStart(gravity.Update)); T.IsBackground = true; T.Start(); } } EntityEngine is created in Game1.cs, and its Update() method is called within Game1.cs. I need my physics calculation in Gravity.cs to run every time the game updates, in a separate thread so that the calculation doesn't slow the game down to horribly low (0-2) FPS. How would I go about making this threading work? (any suggestions for an improved Planetary Gravity system are welcome if anyone has them) I'm also not looking for a lesson in why I shouldn't use threading or the dangers of using it incorrectly, I'm looking for a straight answer on how to do it. I've already spent an hour googling this very question with little results that I understood or were helpful. I don't mean to come off rude, but it always seems hard as a programming noob to get a straight meaningful answer, I usually rather get an answer so complex I'd easily be able to solve my issue if I understood it, or someone saying why I shouldn't do what I want to do and offering no alternatives (that are helpful). Thank you for the help!

    Read the article

  • Victory rewards in digital CCG

    - by Nils Munch
    I am currently polishing a digital CCG where people can play against friend and random opponents in a classical Magic the Gathering-like duel CCG. I plan to award the players with 20 ingame currency units (lets call them gold) for each hour they are playing, 50 for each day they are playing and X for each victory. Now, the X is what I am trying to calculate here, since I would prefer keeping the currency to a certain value, but also with to entice the players to battle. I could go with a solid figure, say 25, for beating up an opponent. But that would result in experienced players only beating up newly started players, making the experience lame for both. I could also make a laddered tier, where you start at level 1, and raise in level as you defeat your opponents, where winning over a player awards you his level x 2 in gold. Which would you prefer if you were playing a game like this. There is no gold-based scoreboard, but the gold is used to purchase new cards along the way.

    Read the article

  • How to break out of if statement

    - by TheBroodian
    I'm not sure if the title is exactly an accurate representation of what I'm actually trying to ask, but that was the best I could think of. I am experiencing an issue with my character class. I have developed a system so that he can perform chain attacks, and something that was important to me was that 1)button presses during the process of an attack wouldn't interrupt the character, and 2) at the same time, button presses should be stored so that the player can smoothly queue up chain attacks in the middle of one so that gameplay doesn't feel rigid or unresponsive. This all begins when the player presses the punch button. Upon pressing the punch button, the game checks the state of the dpad at the moment of the button press, and then translates the resulting combined buttons into an int which I use as an enumerator relating to a punch method for the character. The enumerator is placed into a List so that the next time the character's Update() method is called, it will execute the next punch in the list. It only executes the next punch if my character is flagged with acceptInput as true. All attacks flag acceptInput as false, to prevent the interruption of attacks, and then at the end of an attack, acceptInput is set back to true. While accepting input, all other actions are polled for, i.e. jumping, running, etc. In runtime, if I attack, and then queue up another attack behind it (by pressing forward+punch) I can see the second attack visibly execute, which should flag acceptInput as false, yet it gets interrupted and my character will stop punching and start running if I am still holding down the dpad. Included is some code for context. This is the input region for my character. //Placed this outside the if (acceptInput) tree because I want it //to be taken into account whether we are accepting input or not. //This will queue up attacks, which will only be executed if we are accepting input. //This creates a desired effect that helps control the character in a // smoother fashion for the player. if (Input.justPressed(buttonManager.Punch)) { int dpadPressed = Input.DpadState(0); if (attackBuffer.Count() < 1) { attackBuffer.Add(CheckPunch(dpadPressed)); } else { attackBuffer.Clear(); attackBuffer.Add(CheckPunch(dpadPressed)); } } if (acceptInput) { if (attackBuffer.Count() > 0) { ExecutePunch(attackBuffer[0]); attackBuffer.RemoveAt(0); } //If D-Pad left is being held down. if (Input.DpadDirectionHeld(0, buttonManager.Left)) { flipped = false; if (onGround) { newAnimation = "run"; } velocity = new Vector2(velocity.X - acceleration, velocity.Y); if (walking == true && velocity.X <= -walkSpeed) { velocity.X = -walkSpeed; } else if (walking == false && velocity.X <= -maxSpeed) { velocity.X = -maxSpeed; } } //If D-Pad right is being held down. if (Input.DpadDirectionHeld(0, buttonManager.Right)) { flipped = true; if (onGround) { newAnimation = "run"; } velocity = new Vector2(velocity.X + acceleration, velocity.Y); if (walking == true && velocity.X >= walkSpeed) { velocity.X = walkSpeed; } else if (walking == false && velocity.X >= maxSpeed) { velocity.X = maxSpeed; } } //If jump/accept button is pressed. if (Input.justPressed(buttonManager.JumpAccept)) { if (onGround) { Jump(); } } //If toggle element next button is pressed. if (Input.justPressed(buttonManager.ToggleElementNext)) { if (elements.Count != 0) { elementInUse++; if (elementInUse >= elements.Count) { elementInUse = 0; } } } //If toggle element last button is pressed. if (Input.justPressed(buttonManager.ToggleElementLast)) { if (elements.Count != 0) { elementInUse--; if (elementInUse < 0) { elementInUse = Convert.ToSByte(elements.Count() - 1); } } } //If character is in the process of jumping. if (jumping == true) { if (Input.heldDown(buttonManager.JumpAccept)) { velocity.Y -= fallSpeed.Y; maxJumpTime -= elapsed; } if (Input.justReleased(buttonManager.JumpAccept) || maxJumpTime <= 0) { jumping = false; maxJumpTime = 0; } } //Won't execute abilities if input isn't being accepted. foreach (PlayerAbility ability in playerAbilities) { if (buffer.Matches(ability)) { if (onGround) { ability.Activate(); } if (!onGround && ability.UsableInAir) { ability.Activate(); } else if (!onGround && !ability.UsableInAir) { buffer.Clear(); } } } } When the attackBuffer calls ExecutePunch(int) method, ExecutePunch() will call one of the following methods: private void NeutralPunch1() //0 { acceptInput = false; busy = true; newAnimation = "punch1"; numberOfAttacks++; timeSinceLastAttack = 0; } private void ForwardPunch2(bool toLeft) //true == 7, false == 4 { forwardPunch2Timer = 0f; acceptInput = false; busy = true; newAnimation = "punch2begin"; numberOfAttacks++; timeSinceLastAttack = 0; if (toLeft) { velocity.X -= 800; } if (!toLeft) { velocity.X += 800; } } I assume the attack is being interrupted due to the fact that ExecutePunch() is in the same if statement as running, but I haven't been able to find a suitable way to stop this happening. Thank you ahead of time for reading this, I apologize for it having become so long winded.

    Read the article

  • cocos2d event handler not fired when reentering scene

    - by Adam Freund
    I am encountering a very strange problem with my cocos2d app. I add a sprite to the page and have an event handler linked to it which replaces the scene with another scene. On that page I have another button to take me back to the original scene. When I am back on the original scene, the eventHandler doesn't get fired when I click on the sprite. Below is the relevant code. Thanks for any help! CCMenuItemImage *backBtnImg = [CCMenuItemImage itemWithNormalImage:@"btn_back.png" selectedImage:@"btn_back_pressed.png" target:self selector:@selector(backButtonTapped:)]; backBtnImg.position = ccp(45, 286); CCMenu *backBtn = [CCMenu menuWithItems:backBtnImg, nil]; backBtn.position = CGPointZero; [self addChild:backBtn]; EventHandler method (doesn't get called when the scene is re-entered). (void)backButtonTapped:(id)sender { NSLog(@"backButtonTapped\n"); CCMenuItemImage *backButton = (CCMenuItemImage *)sender; [backButton setNormalImage:[CCSprite spriteWithFile:@"btn_back_pressed.png"]]; [[CCDirector sharedDirector] replaceScene:[CCTransitionFade transitionWithDuration:.25 scene:[MenuView scene] withColor:ccBLACK]]; }

    Read the article

  • OpenGL setup on Windows

    - by kevin james
    I have been trying to use OpenGL for two days now. First on Mac, then on Windows. The problem with Mac is that it doesn't support the newer versions of OpenGL. I ran a tutorial that actually did get some things working, but it only works in XCode (i.e., I can't create a new file, paste in the same code, and get it to work). Because of these issues, I moved to Windows. My Windows 7 has OpenGL 4.3, which is the same that is used in alot of other tutorials. However, not one of these tutorials gives any instruction on how to set it up for the first time. I have come across some vague posts saying that some libraries need to be linked. But WHAT libraries, and HOW do I link them? Please help. I am pretty desperate to set this up as this project is due for work soon. I have actually used OpenGL before at my university, but the computers already had everything set up. The project itself is very easy, but setting up OpenGL is not something I know how to do.

    Read the article

  • Is this technique for stat tracking without a database workable?

    - by baptzmoffire
    If I wanted to create a chess game, for iOS, that tracked both player moves (for retracing the progression of a game and for player stats), what would be the simplest route to take? To clarify, I want to track not only the moves a player has made in a particular game, but how often that player has made that move in past games. For example I want to be able to track: How many times a given player has opened by moving the king pawn up two squares (e4) as white, on move number one. What is the percentage of time the player responds to white's e4 opening move, with moving his own king pawn to e5? What percentage of time does he respond by moving his queenside bishop pawn to c5? And so on. If it's not clear, the stat tracking system should also be able to report how many times this player, as black, move his queen to h1, on move number 30. I'm using Parse.com for my back-end as a server (BaaS) service. If I were to create a class that writes strings that identify move number, player color, moved piece, algebraic notation of the square (e.g. "d8") to a file, locally in the file system saves the file to Parse, and deletes the temporary file from file system upon opening the same game in my tableview (a la a "With Friends" game), download this file from Parse, parse through it and retrieve all stats/history, assign all relevant values to variables Is this plan viable, or is there an easier way?

    Read the article

  • scaling point sprites with distance

    - by Will
    How can you scale a point sprite by its distance from the camera? GLSL fragment shader: gl_PointSize = size / gl_Position.w; seems along the right tracks; for any given scene all sprites seem nicely scaled by distance. Is this correct? How do you compute the proper scaling for my vertex attribute size? I want each sprite to be scaled by the modelview matrix. I had played with arbitrary values and it seems that size is the radius in pixels at the camera, and is not in modelview scale. I've also tried: gl_Position = pMatrix * mvMatrix * vec4(vertex,1.0); vec4 v2 = pMatrix * mvMatrix * vec4(vertex.x,vertex.y+0.5*size,vertex.z,1.0); gl_PointSize = length(gl_Position.xyz-v2.xyz) * gl_Position.w; But this makes the sprites be bigger in the distance, rather than smaller:

    Read the article

  • Optimal sprite size for rotations

    - by Panda Pajama
    I am making a sprite based game, and I have a bunch of images that I get in a ridiculously large resolution and I scale them to the desired sprite size (for example 64x64 pixels) before converting them to a game resource, so when draw my sprite inside the game, I don't have to scale it. However, if I rotate this small sprite inside the game (engine agnostically), some destination pixels will get interpolated, and the sprite will look smudged. This is of course dependent on the rotation angle as well as the interpolation algorithm, but regardless, there is not enough data to correctly sample a specific destination pixel. So there are two solutions I can think of. The first is to use the original huge image, rotate it to the desired angles, and then downscale all the reaulting variations, and put them in an atlas, which has the advantage of being quite simple to implement, but naively consumes twice as much sprite space for each rotation (each rotation must be inscribed in a circle whose diameter is the diagonal of the original sprite's rectangle, whose area is twice of that original rectangle, supposing square sprites). It also has the disadvantage of only having a predefined set of rotations available, which may be okay or not depending on the game. So the other choice would be to store a larger image, and rotate and downscale while rendering, which leads to my question. What is the optimal size for this sprite? Optimal meaning that a larger image will have no effect in the resulting image. This is definitely dependent on the image size, the amount of desired rotations without data loss down to 1/256, which is the minimum representable color difference. I am looking for a theoretical general answer to this problem, because trying a bunch of sizes may be okay, but is far from optimal.

    Read the article

  • How to scroll hex tiles?

    - by Chris Evans
    I don't seem to be able to find an answer to this one. I have a map of hex tiles. I wish to implement scrolling. Code at present: drawTilemap = function() { actualX = Math.floor(viewportX / hexWidth); actualY = Math.floor(viewportY / hexHeight); offsetX = -(viewportX - (actualX * hexWidth)); offsetY = -(viewportY - (actualY * hexHeight)); for(i = 0; i < (10); i++) { for(j = 0; j < 10; j++) { if(i % 2 == 0) { x = (hexOffsetX * i) + offsetX; y = j * sourceHeight; } else { x = (hexOffsetX * i) + offsetX; y = hexOffsetY + (j * sourceHeight); } var tileselected = mapone[actualX + i][j]; drawTile(x, y, tileselected); } } } The code I've written so far only handles X movement. It doesn't yet work the way it should do. If you look at my example on jsfiddle.net below you will see that when moving to the right, when you get to the next hex tile along, there is a problem with the X position and calculations that have taken place. It seems it is a simple bit of maths that is missing. Unfortunately I've been unable to find an example that includes scrolling yet. http://jsfiddle.net/hd87E/1/ Make sure there is no horizontal scroll bar then trying moving right using the - right arrow on the keyboard. You will see the problem as you reach the end of the first tile. Apologies for the horrid code, I'm learning! Cheers

    Read the article

  • tic tac toe game ai as3

    - by David Jones
    I'm looking into creating a simple tic tac toe/noughts and crosses game in actionscript3 and am trying to understand the ideas behind the ai used in a game like this. I've seen some simplistic examples online but from what I've read a game tree or something like minimax is the best way to go about this. Can anyone help explain or reference any good examples of this? I've seen that there is a library called as3ds - data structures for game developers which has a number of classes that might help tie this together? Any info/examples or help is much appreciated

    Read the article

  • Building View Matrix in Direct3D11

    - by Balls
    Am I doing it right? I converted this. m_ViewMatrix = XMMatrixLookAtLH(XMLoadFloat3(&m_Position), lookAtVector, upVector); to this one. XMVECTOR vz = XMVector3Normalize( lookAtVector - XMLoadFloat3(&m_Position) ); XMVECTOR vx = XMVector3Normalize( XMVector3Cross( upVector, vz ) ); XMVECTOR vy = XMVector3Cross( vz, vx ); m_ViewMatrix.r[0] = vx; m_ViewMatrix.r[1] = vy; m_ViewMatrix.r[2] = vz; m_ViewMatrix.r[3] = XMLoadFloat3(&m_Position); m_ViewMatrix.r[0].m128_f32[3] = 0.0f; m_ViewMatrix.r[1].m128_f32[3] = 0.0f; m_ViewMatrix.r[2].m128_f32[3] = 0.0f; m_ViewMatrix.r[3].m128_f32[3] = 1.0f; m_ViewMatrix = XMMatrixInverse( &XMMatrixDeterminant(m_ViewMatrix), m_ViewMatrix ); Everything looks fine when I run it. Another question is, I saw on this site(http://webglfactory.blogspot.com/2011/06/how-to-create-view-matrix.html) that he subtracted lookat from position in his vector vz. I tried it but gave me wrong view matrix. Can anyone check my code. I'm studying linear algebra right now. Sucks my course doesn't have one. Thank you, Balls

    Read the article

  • Projective texture and deferred lighting

    - by Vodácek
    In my previous question, I asked whether it is possible to do projective texturing with deferred lighting. Now (more than half a year later) I have a problem with my implementation of the same thing. I am trying to apply this technique in light pass. (my projector doesn't affect albedo). I have this projector View a Projection matrix: Matrix projection = Matrix.CreateOrthographicOffCenter(-halfWidth * Scale, halfWidth * Scale, -halfHeight * Scale, halfHeight * Scale, 1, 100000); Matrix view = Matrix.CreateLookAt(Position, Target, Vector3.Up); Where halfWidth and halfHeight is are half of the texture's width and height, Position is the Projector's position and target is the projector's target. This seems to be ok. I am drawing full screen quad with this shader: float4x4 InvViewProjection; texture2D DepthTexture; texture2D NormalTexture; texture2D ProjectorTexture; float4x4 ProjectorViewProjection; sampler2D depthSampler = sampler_state { texture = <DepthTexture>; minfilter = point; magfilter = point; mipfilter = point; }; sampler2D normalSampler = sampler_state { texture = <NormalTexture>; minfilter = point; magfilter = point; mipfilter = point; }; sampler2D projectorSampler = sampler_state { texture = <ProjectorTexture>; AddressU = Clamp; AddressV = Clamp; }; float viewportWidth; float viewportHeight; // Calculate the 2D screen position of a 3D position float2 postProjToScreen(float4 position) { float2 screenPos = position.xy / position.w; return 0.5f * (float2(screenPos.x, -screenPos.y) + 1); } // Calculate the size of one half of a pixel, to convert // between texels and pixels float2 halfPixel() { return 0.5f / float2(viewportWidth, viewportHeight); } struct VertexShaderInput { float4 Position : POSITION0; }; struct VertexShaderOutput { float4 Position :POSITION0; float4 PositionCopy : TEXCOORD1; }; VertexShaderOutput VertexShaderFunction(VertexShaderInput input) { VertexShaderOutput output; output.Position = input.Position; output.PositionCopy=output.Position; return output; } float4 PixelShaderFunction(VertexShaderOutput input) : COLOR0 { float2 texCoord =postProjToScreen(input.PositionCopy) + halfPixel(); // Extract the depth for this pixel from the depth map float4 depth = tex2D(depthSampler, texCoord); //return float4(depth.r,0,0,1); // Recreate the position with the UV coordinates and depth value float4 position; position.x = texCoord.x * 2 - 1; position.y = (1 - texCoord.y) * 2 - 1; position.z = depth.r; position.w = 1.0f; // Transform position from screen space to world space position = mul(position, InvViewProjection); position.xyz /= position.w; //compute projection float3 projection=tex2D(projectorSampler,postProjToScreen(mul(position,ProjectorViewProjection)) + halfPixel()); return float4(projection,1); } In first part of pixel shader is recovered position from G-buffer (this code I am using in other shaders without any problem) and then is tranformed to projector viewprojection space. Problem is that projection doesn't appear. Here is an image of my situation: The green lines are the rendered projector frustum. Where is my mistake hidden? I am using XNA 4. Thanks for advice and sorry for my English. EDIT: Shader above is working but projection was too small. When I changed the Scale property to a large value (e.g. 100), the projection appears. But when the camera moves toward the projection, the projection expands, as can bee seen on this YouTube video.

    Read the article

  • OpenGL VertexBuffer won'e render in GLFW3

    - by sm81095
    So I have started to try to learn OpenGL, and I decided to use GLFW to assist in window creation. The problem is, since GLFW3 is so new, there are no tutorials on it yet and how to use it with modern OpenGL (3.3, specifically). Using the GLFW3 tutorial found on the website, which uses older OpenGL rendering (glBegin(GL_TRIANGLES), glVertex3f()), and such, I can get a triangle to render to the screen. The problem is, using new OpenGL, I can't get the same triangle to render to the screen. I am new to OpenGL, and GLFW3 is new to most people, so I may be completely missing something obvious, but here is my code: static const GLuint g_vertex_buffer_data[] = { -1.0f, -1.0f, 0.0f, 1.0f, -1.0f, 0.0f, 0.0f, 1.0f, 0.0f }; int main(void) { GLFWwindow* window; if(!glfwInit()) { fprintf(stderr, "Failed to initialize GLFW."); return -1; } glfwWindowHint(GLFW_SAMPLES, 4); glfwWindowHint(GLFW_CONTEXT_VERSION_MAJOR, 3); glfwWindowHint(GLFW_CONTEXT_VERSION_MINOR, 3); glfwWindowHint(GLFW_OPENGL_FORWARD_COMPAT, GL_TRUE); glfwWindowHint(GLFW_OPENGL_PROFILE, GLFW_OPENGL_CORE_PROFILE); window = glfwCreateWindow(800, 600, "Test Window", NULL, NULL); if(!window) { glfwTerminate(); fprintf(stderr, "Failed to create a GLFW window"); return -1; } glfwMakeContextCurrent(window); glewExperimental = GL_TRUE; GLenum err = glewInit(); if(err != GLEW_OK) { glfwTerminate(); fprintf(stderr, "Failed to initialize GLEW"); fprintf(stderr, (char*)glewGetErrorString(err)); return -1; } GLuint VertexArrayID; glGenVertexArrays(1, &VertexArrayID); glBindVertexArray(VertexArrayID); GLuint programID = LoadShaders("SimpleVertexShader.glsl", "SimpleFragmentShader.glsl"); GLuint vertexBuffer; glGenBuffers(1, &vertexBuffer); glBindBuffer(GL_ARRAY_BUFFER, vertexBuffer); glBufferData(GL_ARRAY_BUFFER, sizeof(g_vertex_buffer_data), g_vertex_buffer_data, GL_STATIC_DRAW); while(!glfwWindowShouldClose(window)) { glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glUseProgram(programID); glEnableVertexAttribArray(0); glBindBuffer(GL_ARRAY_BUFFER, vertexBuffer); glVertexAttribPointer(0, 3, GL_FLOAT, GL_FALSE, 0, (void*)0); glDrawArrays(GL_TRIANGLES, 0, 3); glDisableVertexAttribArray(0); glfwSwapBuffers(window); glfwPollEvents(); } glDeleteBuffers(1, &vertexBuffer); glDeleteProgram(programID); glfwDestroyWindow(window); glfwTerminate(); exit(EXIT_SUCCESS); } I know it is not my shaders, they are super simple and I've checked them against GLFW 2.7 so I know that they work. I'm assuming that I've missed something crucial to using the OpenGL context with GLFW3, so any help locating the problem would be greatly appreciated.

    Read the article

< Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >