Search Results

Search found 21360 results on 855 pages for 'domain controller'.

Page 604/855 | < Previous Page | 600 601 602 603 604 605 606 607 608 609 610 611  | Next Page >

• No file sharing between two server 2008 R2 machines.

  - by ProfKaos

  I have just replaced XP with Server 2008 R2 on my test sever, and have been running 2008 R2 on my dev laptop. When my server was still XP, file sharing just worked, but now it just doesn't. I've enabled everything I can about sharing, and I can ping the server by machine name, but if I try an access a share, I get asked for a password. The passowrd dialog assumes a domain for this user, but neither my laptop admin user nor my server admin user can get past this login. What am I doing wrong?

  Read the article

• Hide unauthorized folders from view in webdav

  - by eric.s

  We have a Windows server running webdav. When a Mac connects to it they see the folders they do not have access to as a blacked out folder, and then the folders they do have access to as folders. This does not happen when a client using Linux or Windows connects. All users connect with their domain account credentials. I may not be searching properly to get the information I am looking for, so I turn here. Is this an issue that I should be researching on the Mac side, or ask our network team to be looking into settings on the server?

  Read the article

• SPF records - what are the differences ?

  - by progeny

  I'm trying to set up an SPF record for my domain. I've read the RFC, been to Wikipedia, openspf.org, etc. but I'm still confused. What is the difference between 'a' and 'mx'? When do I use 'mx: rather than 'a:' or 'include:'? What's the point of '?all' (Neutral result) except for debugging? Why do so many people use '~all' (Softfail) instead of '-all' ? I've been to the Wizard (http://old.openspf.org/wizard.html) but I don't understand the questions.

  Read the article

• how to completly turn my mac into a host, mail server?

  - by idaho

  i have mac osx 10.6.3 (snow leopard) i have already setup mamp so it acts like a local server. but the next thing i wanna try doing is making it into a mail server where i can register an email locally maybe something like myname@myip or however its done. then having the ability to setup mx records, cname, and all that dns good stuff. this will only be for education purposes so that i can fully understand how it all works. what do i need to do? i read something about MailServeSnow but i cant get its domain to work , it must be down. would this be the best option? also would i need mac server or my os would be just fine? thanks

  Read the article

• Getting "is not a valid mailbox" when email sent to primary address

  - by Juan Tarquino

  Anyone outside my domain who sends me an email is getting a bounced email with the following error from Exchange: 550 550 5.1.1 [email protected] is not a valid mailbox (state 14). I can't receive emails from external addresses until I send an email to one of my secondary addresses. Once I sent it to my secondary address, my primary address will start working for a while and fail again after a few hours. We use Exchange 2003. Anyone has any suggestions on what to try?

  Read the article

• Vhost in Apache only working locally?

  - by Gasman

  Ok, I have added lines like: 127.0.0.1 somedomain.com Or some other domain that points to my routers IP, and is forwarded, but I get to the main site, but I want it to go to the subfolder I defined in my httpd-vhosts.conf: NameVirtualHost somedomain.com:80 <VirtualHost somedomain.com:80> DocumentRoot "D:/Apps/xampp/htdocs/somedomain" ServerName somedomain.com ServerAlias somedomain.com </VirtualHost> So, locally somedomain.com works, just remotely it goes to the root htdocs. So If I use a *:80 wildcard I works, but then everything points to the subfolder and all the other vhosts seem to get ignored. Any Idea why this is?

  Read the article

• Certain websites won't load with DHCP server

  - by Simon E

  Hi, I recently configured a server using Windows Server 2008 to take over from my router using DHCP Server. I disabled my router from assigning IPs too. All works well, except for certain sites that refuse to load e.g. "Firefox could not find www.amazon.co.uk" http://www.google.co.uk/ http://www.amazon.co.uk/ http://www.jobsite.co.uk/ I think it may have something to do with co.uk domain. If I reboot the server everything goes back to normal but of course thats not a good solution to do that every other day. Does anyone know of this problem or what it might be - I am very new to server technology.

  Read the article

• How does hadoop decide what its nodes hostnames are?

  - by Dan R

  Currently the urls generated by the jobtracker & namenode return either hostnames like bubbles.local or just bubbles. These end up not resolving unless the client machine has specified these in their /etc/hosts file. When I run the hostname command on these machines it returns a hostname complete with the domain (E.G bubbles.example.com) Running a small java test on these machines InetAddress addr = InetAddress.getLocalHost(); byte[] ipAddr = addr.getAddress(); String hostname = addr.getHostName(); System.out.println(hostname); Produces output just like the hostname command. Where else could hadoop be grabbing a hostname to use in its jobtracker / namenode UI? This is occurring in clusters with Hadoop 1.0.3 and 1.0.4-SNAPSHOT from early august. The machines are running CentOS release 5.8 (Final). The generated URLs I'm referring to are like this http://example:50075/browseDirectory.jsp?namenodeInfoPort=50070&dir=/ or http://example.local:50075/browseDirectory.jsp?namenodeInfoPort=50070&dir=/

  Read the article

• Defrag/TRIM settings for hybrid hard drive?

  - by Joel Coehoorn

  I recently acquired a momentus XT hybrid hard drive. This is a tradition spinning HDD with a small SSD portion for frequently used files. Normally, you are not supposed to defrag SSDs, as it does not help performance and can significantly reduce the life of the drive. But you do need to defrag an HDD to keep good performance. So where does that leave us for hybrid drives? Do I need to turn off defragging in Windows to preserve the SSD portion? Is the on-disk controller smart enough to handle defragging correctly? Is there some utility I need to set it up that I missed? Additionally, for SSDs you normally want to check for and enable TRIM support... but this makes no sense for a HDDs. Where does that leave us for hybrid drives? Should I try to enable TRIM or not?

  Read the article

• Prioritize file sharing performance in Windows Server 2008

  - by cmbrnt

  I've got a server running Windows Server 2008, and use it mainly for sharing files throughout the domain from a number of disks. It's running on VMware ESXi 4.0, in case that matters. My problem is that when I log in to the server to check user permissions etc, the access speed the files on the remote disks almost grinds to a halt. I havn't been able to measure the speeds, but I would guess it slows down to about 100kB/s as soon as I log in. This is on a gigabit network and the problems are equal for all users, even the ones connected to the same switch as the server. I've assigned 2 GB RAM to the server, and reserved it 1,5Ghz processor power. I don't have to do anything special on the server for this halt to occur. How can I make sure file sharing is prioritized on the server, so no matter what applications I'm using it will always make sure file sharing works properly? Could this be a VMware issue?

  Read the article

• How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• How to stop LDAP authentication in ubuntu?

  - by Kery

  My OS is Ubuntu 12.04 and use LDAP authentication. Now I meet a problem that another people want to access my system. But he is in another domain so he can't login. And I have no right to change this configuration in LDAP server. So I have to choose a workaround to solve this problem, for example close the LDAP authentication and use local authentication (I have root right in my system) or create another account which is not registered in LDAP server (I did this but can't change the created account password. The error is 'password reset by root is not supported'). Of course any other suggestion is appreciated! Than you in advance!

  Read the article

• Can a RAID disk setup crash if only 1 hard disk fails?

  - by Steve Rodrigue

  I am a web developer. I have not much experience in hardware. For this reason, I use managed servers. This morning, one of the drives in our setup failed. However, the full site went down. I asked my web host what happened and he replied that the hard disk failed in such a way that the RAID controller couldn't work properly. Do you guys ever seen that before? Is it possible? Thanks for any help on this guys. I need to know if my web host is honest with me. Steve

  Read the article

• Benefits of a RAID BBU in addition to a double UPS + PS system

  - by Wikser

  Today I roughly measured the benefits of enabling write-back on the RAID controller on a server at work. It got no RAID battery-backup-unit (BBU) so the write-cache is currently disabled. As the server is not used to capacity (by far), the results in most test were spectacular, e.g.: Database CRUD: before 35s, after 4s Saving a 1MB Excel file: before: 20s (!), after: 0.5s Of course having a BBU is always recommended, but what are the main benefits of installing a BBU to a system, which got redundant power supplies and is attached to UPSs? Does this depend on the type of the system (database, file, terminal)? What is a realistic fail scenario which could be prevented by a BBU? Thanks in advance!

  Read the article

• What is the world wide web? [closed]

  - by think123

  I don't know where to post this question, so please move it if necessary. Ok, so I've heard of how the professional hosting companies can create 'links' to the world wide web to register an unregistered domain. So that's where my question comes from. Is the world wide web a server to which servers link? Is it created by abstract linkage? I'm not sure. Also, what does it mean for the DNS to be updated throughout the whole world?

  Read the article

• Windows 7 Desktop background picture in Group Policy displaying black - XP working correctly

  - by Shawn Gradwell

  We want everyone on the Windows Domain to have the same desktop background. This is set up in a Group Policy. This works great in Windows XP but the Windows 7 machines display a black background. I have re-created the Group Policy, done various tests with different types and sizes of files Enabling and Disabling Active Desktop. I have researched and tried some options and patches from Microsoft as well. Any idea what I can try or even how to determine the problem?

  Read the article

• create a CNAME record for AWS LoadBalancer DNS name

  - by t q

  I am trying to setup a loadBalancer on AWS. The A-Record it gave me looks like myLoadBalancer-**********.us-east-1.elb.amazonaws.com however when i try to put that in my domain registrars A-Record, i get an errorIP address is not valid. Must be of type x.x.x.x where x is 0-255. amazons solution is you should create a CNAME record for the LoadBalancer DNS name, or use Amazon Route 53 to create a hosted zone. route 53 gives me DNS numbers but if i use that then my email doesnt work from the registrar. question: is there a way to use route 53 and retain my emails? or should i create a CNAME record for the LoadBalancer DNS name, if so how do i do this ... not sure what this means?

  Read the article

• "No input file specified" - unable to access phpMyAdmin using debian squeeze

  - by guiltybyintent

  I have installed phpMyAdmin on my VPS LAMP server (Debian Squeeze/Apache2/MySQL/PHP5), but am unable to access it: //my-ip/phpmyadmin/ and //my-domain/phpmyadmin/ both produce the following error message: "No input file specified". The phpMyAdmin FAQ identifies this as a permission problem, but the suggested solution seems not to apply to my situation. Every other solution I have come across involves removing/purging and reinstalling phpmyadmin - which I have done several times, always to the same result. Previous posts in this forum typically relate to Nginx, which I have not installed. Thanks in advance for any help!

  Read the article

• Subdomain on a separate server (Windows/IIS) won't load default web site?

  - by DOTang

  I've got a domain hosted under godaddy.com. I set it up so that subdomain.mysite.com points to a different server which uses Windows/IIS (say for example ip 1.1.1.1). When I go to the subdomain I get no errors, but no webpage loads. In IIS under the default website I added a bindings for subdomain.mysite.com with the ip of 1.1.1.1, but still nothing loads, just a totally blank page. I know for sure the subdomain host is working correctly because when I ping my subdomain, the correct IP shows. What am I missing to get this working?

  Read the article

• always need administrator password...even my user and password is correct.. i cannot log in

  - by sulit09

  why the computer always need administrator password. when i change all the setting of my computer, all around ..... and when i log in my administrator password... still not working even it is correct....password....and user..... and this pc is connected to domain.. but i try to other pc . to login all also using windows administrator its open..... what is the problem itry run cmd as administrator need administrator password.....again.. , i try to open the properties of network need administrator passpowrd..again how to solve this problem my new pc is windows 7 .

  Read the article

• Games + Closed Lid = Hibernation

  - by Isaac Rabinovitch

  I have an ASUS N53S that I mainly bought for its RAM capacity. (I run a lot of VMs.) But as a bonus, it came with a fancy ATI video card. So I decided to install GTA 4 and plug it into a big monitor and settle down for some casual mayhem. But after about 5 minutes, it goes into hibernation! What gives? Since I was using an external monitor and didn't need the keyboard (using an XBox controller) I closed the lid on the laptop. Gaming is compute-intensive, so my GPU and CPU were both working hard and generating heat. Closing the lid interfered with cooling. Since I have the laptop configured to hibernate when I press the power button, the heat-triggered shutdown caused hibernation.

  Read the article

• One subdomain is not working

  - by BFTrick

  Hello there, My main domain works just fine - www.example.com and a subdomain set up by another developer works as well - sub1.example.com. But when I try to set another subdomain up I go through the process everything seems to work. The software creates the default files where the subdomain files should go. But when I try to browse there it doesn't work. My host uses Plesk to do all of the hosting stuff. What do you think the problem is? I doubt it is some sort of cache issue because I had problems on my phone which I tried after problems on the pc. Maybe for some reason Plesk needs time to set this up? I have used Cpanel before and that works instantly.

  Read the article

• Removing integrated video card drivers broke other hardware?

  - by jsnlxndrlv

  I just purchased and installed an XFX ATI Radeon HD 4650 video card. The installation instructions said to remove the old video card drivers before installing the new driver. I did both things, but now every time I start my computer, the Found New Hardware wizard pops up for the following three devices: PCI Device SM Bus Controller Other PCI Bridge Device Furthermore, my LAN port no longer functions. The cable's connected, and the light on the port comes on, but the computer can't find any servers when I attempt to connect with it. The modem and router are working, and obviously I'm able to use the other computer here to post this. What do I do to fix this?

  Read the article

• Most efficient RAID configuration with 6 disks?

  - by Bob King

  I have a hand-me-down server that I'm setting up at home and it's got 6 72Gb hard disks (as well as 2 18Gb drives that I'm using for the OS). What is the best way to configure those 6 drives? Should I RAID 5 or 6, or go with something simpler, like mirroring? I'm planning to use it to hold a source control repository, and possibly data for a development SQL server. The machine has a hardware raid controller. It is an old IBM server.

  Read the article

• ldap samba user access issue

  - by ancillary

  I have a samba share that is on the LAN. It is auth'd via ldap. Users access file system via ad windows shares. There are shortcuts in directories that point to dir's on samba. Typically a user will click the shortcut to the smb dir, and will be met with a permission denied error. Upon closing explorer and reopening, it will work. DNS is handled by the domain controller, and that is the only server any of the machines use for DNS. Nothing in eventvwr. Only see successful auth entries in samba log. Any ideas?

  Read the article

< Previous Page | 600 601 602 603 604 605 606 607 608 609 610 611  | Next Page >