Search Results

Search found 18096 results on 724 pages for 'let'.

Page 604/724 | < Previous Page | 600 601 602 603 604 605 606 607 608 609 610 611  | Next Page >

• Will TFS 2010 support non-contiguous merging?

  - by steve_d

  I know that merging non-contiguous changesets at once may not be a good idea. However there is at least one situation in which merging non-contiguous changesets is (probably) not going to break anything: when there are no intervening changes on the affected individual files. (At least, it wouldn't break any worse than would a series of cherry-picked merges, checked in each time; and at least this way you would discover breakage before checking in). For instance, let's say you have a Main and a Development branch. They start out identical (e.g. after a release). They have two files, foo.cs and bar.cs. Alice makes a change in Development\foo.cs and checks it in as changeset #1001. Bob makes a change in Development\bar.cs and checks it in as #1002. Alice makes another change to Development\foo.cs and checks it in as #1003. Now we could in theory merge both changes #1001 and #1003 from dev-to main in a single operation. If we try to merge at the branch level, dev-to-main, we will have to do it as two operations. In this simple, contrived example it's simple enough to merge the one file - but in the real world where there would be many files involved, it's not so simple. Non-contiguous merging is one of the reasons given for why "merge by workitem" is not implemented in TFS.

  Read the article

• Search and Matching algorithm

  - by Tony

  Hello everyone. I am trying to come up with an algorithm to do the following: I have total 12 cells that I need to fill until program stops. I have 3 rows and each row has 4 columns. As an example, let me illustrate this as in airplane. So you have 3 rows and each row has 4 columns and you have window/aisle seats. Each row will have a window seat, aisle seat, aisle seat and window seat (|WA AW| Just like seat arrangement in airplane). At each iteration (different set of passengers), there would be some number of passengers (between 1 and 12) and I need to seat them closest together possible (Seat together). And I do this for next group (each iteration) until program stops (It will stop when I am done with every group). For example, I have 3 passengers (A,B,and C) and A wants to seat in Window, B wants to seat in Aisle and C wants to seat in Window. Assuming that all the seats (all 12) are available, I could place them like |A# BC| or |CB #A| and mark the seats dirty (so I don’t pick same seats again for next passengers). And I do this for next group (iteration). I am not sure if this right forum, but if somebody can advise me how I should accomplish, I would really appreciate it. Thanks.

  Read the article

• Does the Eclipse editor have an equivalent of emacs's "align-regex"?

  - by rjray

  I've been using Eclipse pretty regularly for several years now, but I admit to not having explored all the esoterica it has to offer, particularly in the areas of what formatting features the editors offer. The main thing I miss from (X)emacs is the "align-regex" command, which let me take several lines into a region and then format them so that some common pattern in all lines was aligned. The simplest example of this is a series of variable assignments: var str = new String('aString'); var index = 0; var longCamelCaseObjectName = new LongNameObject(); After doing align-regex on "=", that would become: var str = new String('aString'); var index = 0; var longCamelCaseObjectName = new LongNameObject(); Now, you may have your own thoughts on stylistic (ab)use of white space and alignment, etc., but that's just an example (I'm actually trying to align a different kind of mess entirely). Can anyone tell me off-hand if there's an easy key-combo-shortcut for this in Eclipse? Or even a moderately-tricky one?

  Read the article

• In Python, how to make sure database connection will always close before leaving a code block?

  - by Cawas

  I want to prevent database connection being open as much as possible, because this code will run on an intensive used server and people here already told me database connections should always be closed as soon as possible. def do_something_that_needs_database (): dbConnection = MySQLdb.connect(host=args['database_host'], user=args['database_user'], passwd=args['database_pass'], db=args['database_tabl'], cursorclass=MySQLdb.cursors.DictCursor) dbCursor = dbConnection.cursor() dbCursor.execute('SELECT COUNT(*) total FROM table') row = dbCursor.fetchone() if row['total'] == 0: print 'error: table have no records' dbCursor.execute('UPDATE table SET field="%s"', whatever_value) return None print 'table is ok' dbCursor.execute('UPDATE table SET field="%s"', another_value) # a lot more of workflow done here dbConnection.close() # even more stuff would come below I believe that leaves a database connection open when there is no row on the table, tho I'm still really not sure how it works. Anyway, maybe that is bad design in the sense that I could open and close a DB connection after each small block of execute. And sure, I could just add a close right before the return in that case... But how could I always properly close the DB without having to worry if I have that return, or a raise, or continue, or whatever in the middle? I'm thinking in something like a code block, similar to using try, like in the following suggestion, which obviously doesn't work: def do_something_that_needs_database (): dbConnection = MySQLdb.connect(host=args['database_host'], user=args['database_user'], passwd=args['database_pass'], db=args['database_tabl'], cursorclass=MySQLdb.cursors.DictCursor) try: dbCursor = dbConnection.cursor() dbCursor.execute('SELECT COUNT(*) total FROM table') row = dbCursor.fetchone() if row['total'] == 0: print 'error: table have no records' dbCursor.execute('UPDATE table SET field="%s"', whatever_value) return None print 'table is ok' dbCursor.execute('UPDATE table SET field="%s"', another_value) # again, that same lot of line codes done here except ExitingCodeBlock: closeDb(dbConnection) # still, that "even more stuff" from before would come below I don't think there is anything similar to ExitingCodeBlock for an exception, tho I know there is the try else, but I hope Python already have a similar feature... Or maybe someone can suggest me a paradigm move and tell me this is awful and highly advise me to never do that. Maybe this is just something to not worry about and let MySQLdb handle it, or is it?

  Read the article

• How to accommodate for the next iPhones totally different screen resolution?

  - by mystify

  This is a programming question! Read on before you vote to close! According to Gizmodo, the next iPhone will have a new screen resolution: The 3.5-inch screen has a resolution of 960?×?640 pixels This little detail affects our apps in a heavy way. Most of the demo apps on the net have one thing in common: They position views in the believe that the screen has a fixed size of 320 x 480 pixels. So what most -if not all- developers do is: They designed everything in such a way, that a touchable area is -for example- 50 x 50 pixels big. Just enough to tap it. Things have been positioned relative to the upper left, to reach a specific position on screen - let's say the center, or somewhere at the bottom. So the big question is: How will the developers compensate their layout and graphics? Are there already solutions which can be used to calculate coordinates and sizes in a normalized manner, which then appear to be exactly the same when viewing them on a screen of any resolution, assuming at least that the aspect ration won't change? This is community wiki. Just add anything that you think is relevant to this huge problem (constant screen res was one of the main reasons why I didn't go for Android!!).

  Read the article

• MVC design pattern in complex iPad app: is one fat controller acceptable?

  - by nutsmuggler

  I am building a complex iPad application; think of it as a scrapbook. For the purpose of this question, let's consider a page with two images over it. My main view displays my doc data rendered as a single UIImage; this because I need to do some global manipulation over them. This is my DisplayView. When editing I need to instantiate an EditorView with my two images as subviews; this way I can interact with a single image, (rotate it, scale it, move it). When editing is triggered, I hide my DisplayView and show my EditorView. In a iPhone app, I'd associate each main view (that is, a view filling the screen) to a view controller. The problem is here there is just one view controller; I've considered passing the EditorView via a modal view controller, but it's not an option (there a complex layout with a mask covering everything and palettes over it; rebuilding it in the EditorView would create duplicate code). Presently the EditorView incorporates some logic (loads data from the model, invokes some subviews for fine editing, saves data back to the model); EditorView subviews also incorporate some logic (I manipulate images and pass them back to the main EditorView). I feel this logic belongs more to a controller. On the other hand, I am not sure making my only view controller so fat a good idea. What is the best, cocoa-ish implementation of such a class structure? Feel free to ask for clarifications. Cheers.

  Read the article

• Why would one want to use the public constructors on Boolean and similar immutable classes?

  - by Robert J. Walker

  (For the purposes of this question, let us assume that one is intentionally not using auto(un)boxing, either because one is writing pre-Java 1.5 code, or because one feels that autounboxing makes it too easy to create NullPointerExceptions.) Take Boolean, for example. The documentation for the Boolean(boolean) constructor says: Note: It is rarely appropriate to use this constructor. Unless a new instance is required, the static factory valueOf(boolean) is generally a better choice. It is likely to yield significantly better space and time performance. My question is, why would you ever want to get a new instance in the first place? It seems like things would be simpler if constructors like that were private. For example, if they were, you could write this with no danger (even if myBoolean were null): if (myBoolean == Boolean.TRUE) It'd be safe because all true Booleans would be references to Boolean.TRUE and all false Booleans would be references to Boolean.FALSE. But because the constructors are public, someone may have used them, which means that you have to write this instead: if (Boolean.TRUE.equals(myBoolean)) But where it really gets bad is when you want to check two Booleans for equality. Something like this: if (myBooleanA == myBooleanB) ...becomes this: if ( (myBooleanA == null && myBooleanB == null) || (myBooleanA == null && myBooleanA.equals(myBooleanB)) ) I can't think of any reason to have separate instances of these objects which is more compelling than not having to do the nonsense above. What say you?

  Read the article

• Shortest Distance From An Array

  - by notyou61

  I have an ajax function which returns the latitudes and longitudes of locations stored in a database. These are returned and placed in an array. A calculation is performed to return their distance from the users current location based on the latitude/longitude. I would like to return only the record with the shortest calculated distance. My code is as follows: Ajax Success // Success success: function (data) { // Obtain Log/Lat navigator.geolocation.getCurrentPosition(function(position) { // Obtain Current Position Lat/Lon glbVar.latitude = position.coords.latitude; glbVar.longitude = position.coords.longitude; // Console Log //console.log('Lat: ' + glbVar.latitude + ' Lon: ' + glbVar.longitude); // Obtain Location Distances for ( var i = 0; i < data.length; i++ ) { // Location Instances var varLocation = data[i]; // Location Distance varLocation.distance = calculateDistance(glbVar.longitude, glbVar.latitude, varLocation.locationLongitude, varLocation.locationLatitude); } // Sort Locations By Distance var sortedData = data.sort(function(a, b) { // Return Locations return a.distance - b.distance; }); // Output Results $.map(sortedData, function(item) { // Obtain Location Distance varLocationsDistance = calculateDistance(glbVar.longitude, glbVar.latitude, item.locationLongitude, item.locationLatitude); // Obtain Location Radius Assignment if (varLocationsDistance <= varLocationRadius) { // Function Return functionReturn = $({locationID : item.locationID + ', Distance : ' + varLocationsDistance + ' m'}); // Return // Function to get the Min value in Array Array.min = function( sortedData ){ functionReturn = Math.min.apply( Math, sortedData ); // console.log(functionReturn); }; } }); }); } The calculateDistance function returns the distance from the users current location and those from the database. The varLocationsDistance <= varLocationRadius "If" statement returns records within a certain distance radius (100 meters), within that statement I would like to return the shortest distance. I am a self taught amateur web developer and as a result may not have provide enough information for an answer, please let me know. Thanks,

  Read the article

• updating a column in a table only if after the update it won't be negative and identifying all updat

  - by Azeem

  Hello all, I need some help with a SQL query. Here is what I need to do. I'm lost on a few aspects as outlined below. I've four relevant tables: Table A has the price per unit for all resources. I can look up the price using a resource id. Table B has the funds available to a given user. Table C has the resource production information for a given user (including the number of units to produce everyday). Table D has the number of units ever produced by any given user (can be identified by user id and resource id) Having said that, I need to run a batch job on a nightly basis to do the following: a. for all users, identify whether they have the funds needed to produce the number of resources specified in table C and deduct the funds if they are available from table B (calculating the cost using table A). b. start the process to produce resources and after the resource production is complete, update table D using values from table C after the resource product is complete. I figured the second part can be done by using an UPDATE with a subquery. However, I'm not sure how I should go about doing part a. I can only think of using a cursor to fetch each row, examine and update. Is there a single sql statement that will help me avoid having to process each row manually? Additionally, if any rows weren't updated, the part b. SQL should not produce resources for that user. Basically, I'm attempting to modify the sql being used for this logic that currently is in a stored procedure to something that will run a lot faster (and won't process each row separately). Please let me know any ideas and thoughts. Thanks! - Azeem

  Read the article

• When destroying one record, another one gets destroyed

  - by normalocity

  Products (like an iPod Classic) :has_many = :listings, :dependent = :destroy Listings (like "My name is Joe, and I have an iPod for sale) :belongs_to = :product So, if I delete a given Product, all the listings that point to it get deleted. That makes sense, and is by design. However, I am writing a "merge" function, where you merge two Products into one, and combine their Listings. So, let's say my two products are "iPod Color" and "iPod Classic", and I want to merge the two. What I want to do is say, "iPod Color, merge into iPod Classic", and result should be that: All the iPod Color Listings are re-pointed to the iPod Classic product After the product_id change, the Listing(s) are saved I then delete the "iPod Color" product Well, that should all work fine, without deleting any Listings. However, I've got this controller, and for whatever reason when I destroy the "iPod Color" Product, even after confirming that the Listings have been moved to "iPod Classic" and saved to the database, the Listings that were previously pointed to "iPod Color" get destroyed as well, and I can't figure out why. It's as if they are retaining some kind of link to the destroyed product, and therefore begin destroyed themselves. What painfully obvious thing am I missing? def merge merging_from = Product.find(params[:id]) merging_to = Product.find_by_model(params[:merging_to]) unless merging_to.nil? unless merging_from.nil? unless merging_from == merging_to # you don't want to merge something with itself merging_from.listings.each do |l| l.product = merging_to l.save end # through some debugging, I've confirmed that my missing Listings are disappearing as a result of the following destroy call merging_from.destroy end end end

  Read the article

• Action listener for JButton array

  - by user530809

  Let's say I have a program with 2D array of buttons, and when you click one of them it turns red. I didn't want to declare every single button seperately so I just created JButton[][] array for them. The problem is that I don't know how to use action listener on any of the buttons in the array so it would change the color of this particular button, and none of related questions is relevant to this. I tried to use "for" but it doesn't help: package appli; import javax.swing.*; import java.awt.*; import java.awt.event.*; public class MainW extends JFrame implements ActionListener { public MainW(){ setSize(640,480); setTitle("title"); setLayout(null); JButton[][] btnz = new JButton[5][5]; for(Integer i=0;i<5;i++) { for(Integer j=0;j<5;j++) { btnz[i][j]= new JButton(""); btnz[i][j].setBackground(Color.WHITE); btnz[i][j].setBounds(10+20*i,10+20*j,20,20); add(btnz[i][j]); btnz[i][j].addActionListener(this); } } setDefaultCloseOperation(EXIT_ON_CLOSE); setVisible(true); } public void actionPerformed(ActionEvent e){ for(Integer i=0;i<5;i++) { for(Integer j=0;j<5;j++) { if (e.getSource()==btnz[i][j]); { btnz[i][j].setBackground(Color.RED); } } } } }

  Read the article

• Porting Perl to C++ `print "\x{2501}" x 12;`

  - by jippie

  I am porting a program from Perl to C++ as a learning objective. I arrived at a routine that draws a table with commands like the following: Perl: print "\x{2501}" x 12; And it draws 12 times a '?' ("box drawings heavy horizontal"). Now I figured out part of the problem already: Perl: \x{}, \x00 Hexadecimal escape sequence; C++: \unnnn To print a single Unicode character: C++: printf( "\u250f\n" ); But does C++ have a smart equivalent for the 'x' operator or would it come down to a for loop? UPDATE Let me include the full source code I am trying to compile with the proposed solution. The compiler does throw an errors: g++ -Wall -Werror project.cpp -o project project.cpp: In function ‘int main(int, char**)’: project.cpp:38:3: error: ‘string’ is not a member of ‘std’ project.cpp:38:15: error: expected ‘;’ before ‘s’ project.cpp:39:3: error: ‘cout’ is not a member of ‘std’ project.cpp:39:16: error: ‘s’ was not declared in this scope #include <stdlib.h> #include <stdint.h> #include <stdio.h> #include <string.h> int main ( int argc, char *argv[] ) { if ( argc != 2 ) { fprintf( stderr , "usage: %s matrix\n", argv[0] ); exit( 2 ); } else { //std::string s(12, "\u250f" ); std::string s(12, "u" ); std::cout << s; } }

  Read the article

• Java File Handling, what did I do wrong?

  - by Urda

  Wrote up a basic file handler for a Java Homework assignment, and when I got the assignment back I had some notes about failing to catch a few instances: Buffer from file could have been null. File was not found File stream wasn't closed Here is the block of code that is used for opening a file: /** * Create a Filestream, Buffer, and a String to store the Buffer. */ FileInputStream fin = null; BufferedReader buffRead = null; String loadedString = null; /** Try to open the file from user input */ try { fin = new FileInputStream(programPath + fileToParse); buffRead = new BufferedReader(new InputStreamReader(fin)); loadedString = buffRead.readLine(); fin.close(); } /** Catch the error if we can't open the file */ catch(IOException e) { System.err.println("CRITICAL: Unable to open text file!"); System.err.println("Exiting!"); System.exit(-1); } The one comment I had from him was that fin.close(); needed to be in a finally block, which I did not have at all. But I thought that the way I have created the try/catch it would have prevented an issue with the file not opening. Let me be clear on a few things: This is not for a current assignment (not trying to get someone to do my own work), I have already created my project and have been graded on it. I did not fully understand my Professor's reasoning myself. Finally, I do not have a lot of Java experience, so I was a little confused why my catch wasn't good enough.

  Read the article

• How can I avoid encoding mixups of strings in a C/C++ API?

  - by Frerich Raabe

  I'm working on implementing different APIs in C and C++ and wondered what techniques are available for avoiding that clients get the encoding wrong when receiving strings from the framework or passing them back. For instance, imagine a simple plugin API in C++ which customers can implement to influence translations. It might feature a function like this: const char *getTranslatedWord( const char *englishWord ); Now, let's say that I'd like to enforce that all strings are passed as UTF-8. Of course I'd document this requirement, but I'd like the compiler to enforce the right encoding, maybe by using dedicated types. For instance, something like this: class Word { public: static Word fromUtf8( const char *data ) { return Word( data ); } const char *toUtf8() { return m_data; } private: Word( const char *data ) : m_data( data ) { } const char *m_data; }; I could now use this specialized type in the API: Word getTranslatedWord( const Word &englishWord ); Unfortunately, it's easy to make this very inefficient. The Word class lacks proper copy constructors, assignment operators etc.. and I'd like to avoid unnecessary copying of data as much as possible. Also, I see the danger that Word gets extended with more and more utility functions (like length or fromLatin1 or substr etc.) and I'd rather not write Yet Another String Class. I just want a little container which avoids accidental encoding mixups. I wonder whether anybody else has some experience with this and can share some useful techniques. EDIT: In my particular case, the API is used on Windows and Linux using MSVC 6 - MSVC 10 on Windows and gcc 3 & 4 on Linux.

  Read the article

• Running a process at the Windows 7 Welcome Screen

  - by peelman

  So here's the scoop: I wrote a tiny C# app a while back that displays the hostname, ip address, imaged date, thaw status (we use DeepFreeze), current domain, and the current date/time, to display on the welcome screen of our Windows 7 lab machines. This was to replace our previous information block, which was set statically at startup and actually embedded text into the background, with something a little more dynamic and functional. The app uses a Timer to update the ip address, deepfreeze status, and clock every second, and it checks to see if a user has logged in and kills itself when it detects such a condition. If we just run it, via our startup script (set via group policy), it holds the script open and the machine never makes it to the login prompt. If we use something like the start or cmd commands to start it off under a separate shell/process, it runs until the startup script finishes, at which point Windows seems to clean up any and all child processes of the script. We're currently able to bypass that using psexec -s -d -i -x to fire it off, which lets it persist after the startup script is completed, but can be incredibly slow, adding anywhere between 5 seconds and over a minute to our startup time. We have experimented with using another C# app to start the process, via the Process class, using WMI Calls (Win32_Process and Win32_ProcessStartup) with various startup flags, etc, but all end with the same result of the script finishing and the info block process getting killed. I tinkered with rewriting the app as a service, but services were never designed to interact with the desktop, let alone the login window, and getting things operating in the right context never really seemed to work out. So for the question: Does anybody have a good way to accomplish this? Launch a task so that it would be independent of the startup script and run on top of the welcome screen?

  Read the article

• C++ Operator Ambiguity

  - by Scott

  Forgive me, for I am fairly new to C++, but I am having some trouble regarding operator ambiguity. I think it is compiler-specific, for the code compiled on my desktop. However, it fails to compile on my laptop. I think I know what's going wrong, but I don't see an elegant way around it. Please let me know if I am making an obvious mistake. Anyhow, here's what I'm trying to do: I have made my own vector class called Vector4 which looks something like this: class Vector4 { private: GLfloat vector[4]; ... } Then I have these operators, which are causing the problem: operator GLfloat* () { return vector; } operator const GLfloat* () const { return vector; } GLfloat& operator [] (const size_t i) { return vector[i]; } const GLfloat& operator [] (const size_t i) const { return vector[i]; } I have the conversion operator so that I can pass an instance of my Vector4 class to glVertex3fv, and I have subscripting for obvious reasons. However, calls that involve subscripting the Vector4 become ambiguous to the compiler: enum {x, y, z, w} Vector4 v(1.0, 2.0, 3.0, 4.0); glTranslatef(v[x], v[y], v[z]); Here are the candidates: candidate 1: const GLfloat& Vector4:: operator[](size_t) const candidate 2: operator[](const GLfloat*, int) <built-in> Why would it try to convert my Vector4 to a GLfloat* first when the subscript operator is already defined on Vector4? Is there a simple way around this that doesn't involve typecasting? Am I just making a silly mistake? Thanks for any help in advance.

  Read the article

• skip reading headers in matlab

  - by Paul

  I had a similar question. but what i am trying now is to read files in .txt format into matlab. My problem is with the headers. Manytimes due to errors the system rewrites the headers in the middle of file and then matlab cannot read the file. IS there a way to skip it? I know i can skip reading some characters if i know what the character is. here is the code i am using. [c,pathc]=uigetfile({'*.txt'},'Select the data','V:\data); file=[pathc c]; data= dlmread(file, ',', 1,4); this way i let the user pick the file. My files are huge typically [ 86400 125 ] so naturally it has 125 header fields or more depends on files. Thanks Because the files are so big i cannot copy , but its in format like day time col1 col2 col3 col4 ............................... 2/3/2010 0:10 3.4 4.5 5.6 4.4 ............................... .................................................................. .................................................................. and so on

  Read the article

• Template neglects const (why?)

  - by Gabriel

  Does somebody know, why this compiles?? template< typename TBufferTypeFront, typename TBufferTypeBack = TBufferTypeFront> class FrontBackBuffer{ public: FrontBackBuffer( const TBufferTypeFront front, const TBufferTypeBack back): ////const reference assigned to reference??? m_Front(front), m_Back(back) { }; ~FrontBackBuffer() {}; TBufferTypeFront m_Front; ///< The front buffer TBufferTypeBack m_Back; ///< The back buffer }; int main(){ int b; int a; FrontBackBuffer<int&,int&> buffer(a,b); // buffer.m_Back = 33; buffer.m_Front = 55; } I compile with GCC 4.4. Why does it even let me compile this? Shouldn't there be an error that I cannot assign a const reference to a non-const reference?

  Read the article

• Using VB6 to search for existence of DataFile in Outlook

  - by Graeme

  Hi, I am wanting to write an Add-In for Outlook 2003 which, when Outlook is opened, search for the existence of a datafile called DMSDataStore and if it doesn't exist will install the datafile. I have managed to create the Add-In using VB6 and it runs when I open Outlook. However I haven't found the best/easiest way to search for the existence of the datafile. If the datafile exists it is visible within Outlook under the user's mailbox, much the same as an archive folder is. I would like to be able to search for it by name which is DMSDataFile. I did try - Set tmpInbox = parentFolder.Folders("DMSDataFile") This works OK if the datafile exists but will throw an error if it doesn't. I can create an error handler which will then install the datafile but this doesn't seem like a very tidy way of doing things. I guess I might have to recursively search for the datafile. Can someone let me know what is the best / easiest way to search for the datafile using the name of the datafile and give me some code with which to do it. Thanks G

  Read the article

• Java queue and multi-dimension array

  - by javaLearner.java

  First of all, this is my code (just started learning java): Queue<String> qe = new LinkedList<String>(); qe.add("b"); qe.add("a"); qe.add("c"); qe.add("d"); qe.add("e"); My question: Is it possible to add element to the queue with two values, like: qe.add("a","1"); // where 1 is integer So, that I know element "a" have value 1. If I want to add a number let say "2" to element a, I will have like a = 3. If this cant be done, what else in java classes that can handle this? I tried to use multi-dimention array, but its kinda hard to do the queue, like pop, push etc. (Maybe I am wrong) How to call specific element in the queue? Like, call element a, to check its value. [Note] Please don't give me links that ask me to read java docs. I was reading, and I still dont get it. The reason why I ask here is because, I know I can find the answer faster and easier.

  Read the article

• Creating simple calculator with bison & flex in C++ (not C)

  - by ak91

  Hey, I would like to create simple C++ calculator using bison and flex. Please note I'm new to the creating parsers. I already found few examples in bison/flex but they were all written in C. My goal is to create C++ code, where classes would contain nodes of values, operations, funcs - to create AST (evaluation would be done just after creating whole AST - starting from the root and going forward). For example: my_var = sqrt(9 ** 2 - 32) + 4 - 20 / 5 my_var * 3 Would be parsed as: = / \ my_var + / \ sqrt - | / \ - 4 / / \ / \ ** 32 20 5 / \ 9 2 and the second AST would look like: * / \ my_var 3 Then following pseudocode reflects AST: ast_root = create_node('=', new_variable("my_var"), exp) where exp is: exp = create_node(OPERATOR, val1, val2) but NOT like this: $$ = $1 OPERATOR $3 because this way I directly get value of operation instead of creation the Node. I believe the Node should contain type (of operation), val1 (Node), val2 (Node). In some cases val2 would be NULL, like above mentioned sqrt which takes in the end one argument. Right? It will be nice if you can propose me C++ skeleton (without evaluation) for above described problem (including *.y file creating AST) to help me understand the way of creating/holding Nodes in AST. Code can be snipped, just to let me get the idea. I'll also be grateful if you point me to an existing (possibly simple) example if you know any. Thank you all for your time and assistance!

  Read the article

• ASP.NET: how can I compile in DEBUG mode?

  - by Budda

  AFAIK, usual ASP.NET web site/web application switched on into DEBUG mode when web/app-config setting "compilation" has debug="false". But I don't clearly understand how it works. Let's consider example: I have <compilation debug="true" />. I've added the following line into "Page_Load" method: System.Diagnostics.Debug.WriteLine("Page_Load"); When I launched web-site in 'debug' mode (using F5 button) It put me 'Page_Load' into output window. Everything is ok so far. When I change application compilation mode into non-debug: Will it recompile everything for 'non-debug' mode? Is this enough to go into "production" environment with this change only? I guess, it should be enough for web-site that doesn't use other project. Otherwise, I would better switch whole configuration into "Release" mode. In this case EACH project will be recompiled in "Release" mode. Am I right? Could you please point me if something is wrong here? Thanks a lot!

  Read the article

• Set the amount of rows JList show (Java)

  - by Alex Cheng

  Hi all. Problem: I have a method that creates a list from the parsed ArrayList. I manage to show the list in the GUI, without scrollbar. However, I am having problem setting it to show only the size of ArrayList. Meaning, say if the size is 6, there should only be 6 rows in the shown List. Below is the code that I am using. I tried setting the visibleRowCount as below but it does not work. I tried printing out the result and it shows that the change is made. private void createSuggestionList(ArrayList<String> str) { int visibleRowCount = str.size(); System.out.println("visibleRowCount " + visibleRowCount); listForSuggestion = new JList(str.toArray()); listForSuggestion.setSelectionMode(ListSelectionModel.SINGLE_SELECTION); listForSuggestion.setSelectedIndex(0); listForSuggestion.setVisibleRowCount(visibleRowCount); System.out.println(listForSuggestion.getVisibleRowCount()); listScrollPane = new JScrollPane(listForSuggestion); MouseListener mouseListener = new MouseAdapter() { @Override public void mouseClicked(MouseEvent mouseEvent) { JList theList = (JList) mouseEvent.getSource(); if (mouseEvent.getClickCount() == 2) { int index = theList.locationToIndex(mouseEvent.getPoint()); if (index >= 0) { Object o = theList.getModel().getElementAt(index); System.out.println("Double-clicked on: " + o.toString()); } } } }; listForSuggestion.addMouseListener(mouseListener); textPane.add(listScrollPane); repaint(); } To summarize: I want the JList to show as many rows as the size of the parsed ArrayList, without a scrollbar. Any ideas? Please help. Thanks. Please let me know if a picture of the problem is needed in case I did not phrase my question correctly.

  Read the article

• VB.NET CInt(Long) behaving differently in 32- and 64-bit environments

  - by LocoDelAssembly

  Hello everybody, this is my first message here. Today I had a problem converting a Long (Int64) to an Integer (Int32). The problem is that my code was always working in 32-bit environments, but when I try THE SAME executable in a 64-bit computer it crashes with a System.OverflowException exception. I've prepared this test code in VS2008 in a new project with default settings: Module Module1 Sub Main() Dim alpha As Long = -1 Dim delta As Integer Try delta = CInt(alpha And UInteger.MaxValue) Console.WriteLine("CINT OK") delta = Convert.ToInt32(alpha And UInteger.MaxValue) Console.WriteLine("Convert.ToInt32 OK") Catch ex As Exception Console.WriteLine(ex.GetType().ToString()) Finally Console.ReadLine() End Try End Sub End Module On my 32-bit setups (Windows XP SP3 32-bit and Windows 7 32-bit) it prints "CINT OK", but in the 64-bit computer (Windows 7 64-bit) that I've tested THE SAME executable it prints the exception name only. Is this behavior documented? I tried to find a reference but failed miserably. For reference I leave the MSIL code too: .method public static void Main() cil managed { .entrypoint .custom instance void [mscorlib]System.STAThreadAttribute::.ctor() = ( 01 00 00 00 ) // Code size 88 (0x58) .maxstack 2 .locals init ([0] int64 alpha, [1] int32 delta, [2] class [mscorlib]System.Exception ex) IL_0000: nop IL_0001: ldc.i4.m1 IL_0002: conv.i8 IL_0003: stloc.0 IL_0004: nop .try { .try { IL_0005: ldloc.0 IL_0006: ldc.i4.m1 IL_0007: conv.u8 IL_0008: and IL_0009: conv.ovf.i4 IL_000a: stloc.1 IL_000b: ldstr "CINT OK" IL_0010: call void [mscorlib]System.Console::WriteLine(string) IL_0015: nop IL_0016: ldloc.0 IL_0017: ldc.i4.m1 IL_0018: conv.u8 IL_0019: and IL_001a: call int32 [mscorlib]System.Convert::ToInt32(int64) IL_001f: stloc.1 IL_0020: ldstr "Convert.ToInt32 OK" IL_0025: call void [mscorlib]System.Console::WriteLine(string) IL_002a: nop IL_002b: leave.s IL_0055 } // end .try catch [mscorlib]System.Exception { IL_002d: dup IL_002e: call void [Microsoft.VisualBasic]Microsoft.VisualBasic.CompilerServices.ProjectData::SetProjectError(class [mscorlib]System.Exception) IL_0033: stloc.2 IL_0034: nop IL_0035: ldloc.2 IL_0036: callvirt instance class [mscorlib]System.Type [mscorlib]System.Exception::GetType() IL_003b: callvirt instance string [mscorlib]System.Type::ToString() IL_0040: call void [mscorlib]System.Console::WriteLine(string) IL_0045: nop IL_0046: call void [Microsoft.VisualBasic]Microsoft.VisualBasic.CompilerServices.ProjectData::ClearProjectError() IL_004b: leave.s IL_0055 } // end handler } // end .try finally { IL_004d: nop IL_004e: call string [mscorlib]System.Console::ReadLine() IL_0053: pop IL_0054: endfinally } // end handler IL_0055: nop IL_0056: nop IL_0057: ret } // end of method Module1::Main I suspect that the instruction that is behaving differently is either conv.ovf.i4 or the ldc.i4.m1/conv.u8 pair. If you know what is going on here please let me know Thanks

  Read the article

• Removing most inline styles and properties with PHP

  - by bakkelun

  This question is related to a similar case, namely http://stackoverflow.com/questions/2488950/removing-inline-styles-using-php The solution there does not remove i.e: <font face="Tahoma" size="4"> But let's say I have a mixed bag of inline styles and properties, like this: <ul style="padding: 5px; margin: 5px;"> <li style="padding: 2px;"><div style="border:2px solid green;">Some text</div></li> <li style="padding: 2px;"><font face="arial,helvetica,sans-serif" size="2">Some text</font></li> <li style="padding: 2px;"><font face="arial,helvetica,sans-serif" size="2">Some text</font></li> </ul> What regExp is needed to achieve this result? <ul> <li><div>Some text</div></li> <li><font>Some text</font></li> <li><font>Some text</font></li> </ul> Thanks for reading the question, any help is appreciated.

  Read the article

< Previous Page | 600 601 602 603 604 605 606 607 608 609 610 611  | Next Page >