Search Results

Search found 29159 results on 1167 pages for 'xml configuration'.

Page 605/1167 | < Previous Page | 601 602 603 604 605 606 607 608 609 610 611 612  | Next Page >

  • Share the same subnet between Internal network and VPN Clients

    - by Pascal
    I would like to set up a configuration where VPN clients connecting to my Forefront TMG can access all the resources of my Internal network without having the to use the option "Use default gateway on remote network" on the VPN's TCP/IP Ipv4 Advanced Settings. This is important to me, since they can use their own internet while accessing my network through VPN (the security implications of this are acceptable on my cenario) My Internal network runs on 10.50.75.x, and I set up Forefront TMG to relay the DHCP of my Internal network to the VPN clients, so they get IPs from the same range as the Internal network. This setup initially works, and the VPN clients use their own internet, and can access anything that is on the internal network. However, after a while, HTTP Proxy Traffic from the Internal network starts getting routed to the IP of the RRAS Dial In Interface, instead of the IP of the Internal's network gateway. When this happens, the HTTP Proxy starts getting denied for obvious reasons. My first question is: does this happen because Forefront TMG wasn't designed to handle a cenario that I described above, and it "loses itself"? My second question is: Is there any way to solve this problem, either through configuration or firewall policies? My third question is: If there's no way that it can work with the cenario above, is there another cenario that will solve my problem, and do what I'd like it to do properly? Below are my network routes: 1 => Local Host Access => Route => Local Host => All Networks 2 => VPN Clients to Internal Network => Route => VPN Clients => Internal 3 => Internet Access => NAT => Internal, Perimeter, VPN Clients => External 4 => Internal to Perimeter => Route => Internal, VPN Clients => Perimeter Tks!

    Read the article

  • OS X: How to force traffic through a specific SOCKS proxy on a per-app basis?

    - by GJ.
    I'm running a certain desktop app (actually via AIR if it makes any difference) which doesn't have any built-in proxy configuration settings. I need to get all traffic just from this app directed through a secure SOCKS proxy. This implies I can't use the global network preferences, as these would affect many other apps. Is there any way to force all network communication through a given SOCKS proxy on a per-app basis?

    Read the article

  • I want to buy a second hand laptop, how to get the real technical specifications of a used laptop?

    - by Steven
    I want to buy a second hand laptop. I need to examine a laptop's configuration before I make a decision to buy it. I know the information the information about the components of a laptop can be intentionally fabricated.So the information I go through my computer/properties/hardware/device manager to see may not be reliable. So how can I get the real technical specifications of a second hand laptop?

    Read the article

  • configuring rds without having a domain

    - by shiva
    How to configure Active Directory Domain Services Configuration if i dont have a domain. problem statement I have a server and i want to install RDS inorder to have session based virtualisation so that 5-6 users can access this server . so i wanted to install RDS from adding roles and features. when i start this process i get an error saying local server must be joined to the domain to complete the RDS installation please help me out

    Read the article

  • Nginx not working properly on subdomains

    - by javipas
    I've been trying to setup a Sugar CRM instance. I've got a domain that has its main site on a server (www.domain.com) and I've created a subdomain (sugar.domain.com), but I wnat this subdomain to be hosted on another server. This second server has nginx installed, and there's a working WordPress blog there on a virtualhost, so I would need to setup a second site. To do this I've created the directory structure, and I've created a /etc/nginx/sites-enabled/sugar.domain.com configuration file that has the following: * server { listen 80; server_name sugar.domain.com *.domain.com; access_log /var/www/sugar/log/access.log; error_log /var/www/sugar/log/error.log info; location / { root /var/www/sugar; index index.php; } location ~ .php$ { fastcgi_split_path_info ^(.+\.php)(.*)$; fastcgi_pass backend; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/sugar/$fastcgi_script_name; include fastcgi_params; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_intercept_errors on; fastcgi_ignore_client_abort on; fastcgi_read_timeout 180; } ## Disable viewing .htaccess & .htpassword location ~ /\.ht { deny all; } } upstream backend { server 127.0.0.1:9000; } As far as I know, I need the *.domain.com parameter on the "server_name" flag, but something is crashing here: I get either a 403 Forbidden error, or I get PHP code (I can read the PHP file code in the browser, like normal text) that somehow is not executed. I've tried setting permissions to 755 inside the /var/www/sugar/ directory, and I've also set up the owner:group with a chown -R www-data:www-data /var/www/sugar/ The thing is, I don't now if my mistake is in the nginx site configuration, in my folder permissions, or in other place :( Could it be because of the main domain (www.domain.com) is hosted on other server? Do they have to be together necessarily?

    Read the article

  • Trac changesets not displaying

    - by Robin Weston
    I have setup Trac to integrate with our VisualSVN server. It all seems to work fine, except when I am viewing changesets, it only shows the files that have changed, not the actual diff of what has changed in the file. In addition, when I am viewing a particular file in Trac, the 'diff' link is not visible, which I have seen in other installations. I assume it is probably a configuration issue, or maybe the way the data is being entered in the first place. Any suggestions?

    Read the article

  • Can I connect two routers to one switch?

    - by vanneto
    I want to connect two routers to a switch which will then be connected to a modem. Now as far as I know a switch does not do network translation and this won't work with one IP address. So I bought two addresses at my ISP. Attached is a simple schematic that explains what I want to do. Is there any additional configuration needed on either of the routers (Linksys WRT54GL) to make this work or will it "Just Work"?

    Read the article

  • Installing SQL Server Compact 3.5 SP2 *after* installing SQL 2012 RC0 - machine.config path include double slashes?

    - by Sigmund
    I'm trying to install SQL Compact 3.5 SP2 after I've installed SQL 2012 RC0, on a x64 Windows 7. The x86 installer goes through fine. The x64 installer fails, with the error: "Error 25543.Failed to save changes to XML file c:\Windows\Microsoft.NET\Framework64\v4.0.30319\CONFIG\machine.config, system error: -2147024864" Note the \CONFIG (double backslash) where there should be a single backslash... any ideas why this is happening and how to solve it?

    Read the article

  • Why is my SharePoint people search WorkEmail property blank?

    - by Nat
    I have an SSP setup for my site and I am trying to get the presence bubble working correctly. However, I cannot get the people search core results webpart to display the workemail. I have output the raw xml into my people search core results xslt and used the SharePoint Query Web Service Test Tool to try and find values for these properties, but they are appearing blank (including sipAddress and HighConfidenceDisplayProperty11). Note: The presence bubble does work when hard coded to users email address, so the problem is absolutely to do with the search results.

    Read the article

  • Change drive letter of DVD drive

    - by NickC
    I am trying to use a Drive Maps GPO on Server 2012 - User Configuration - Preferences - Windows Settings - Drive Maps. Problem is I want to map a drive to D: but this is automatically assigned to the DVD drive. Question is can I prevent D: being used as the next drive letter when Windows 8 boots up? I seem to recall in early version of Windows, or maybe it was Novell, a first_drive environment variable for this purpose.

    Read the article

  • How to install VMWare ESXi CLI on CentOS 6.0?

    - by weekens
    I'm trying to install VMware-vSphere-CLI-5.0.0-422456.x86_64 onto CentOS 6.0 64bit, but the installer complains: CPAN not able to install following Perl modules on the system. These must be installed manually for use by vSphere CLI: UUID 0.03 or newer I tried to do sudo yum install uuid-perl and also sudo yum install perl-SOAP-Lite perl-Data-Dump perl-Class-MethodMaker perl-Crypt-SSLeay perl-libxml-perl perl-XML-LibXML-Common but this doesn't help. What else can I try to do?

    Read the article

  • Configure exim in debian 6

    - by blakcaps
    I am trying to configure exim with gmail in my debian 6 system as per this tutorial http://www.manu-j.com/blog/wordpress-exim4-ubuntu-gmail-smtp/75/.After configuring, When i run update-exim4.conf i am getting this message, Exim configuration error: two client authenticators (gmail_login and login) have the same public name (LOGIN) Invalid new configfile /var/lib/exim4/config.autogenerated.tmp, not installing /var/lib/exim4/config.autogenerated.tmp to /var/lib/exim4/config.autogenerated Any pointers to solve this?

    Read the article

  • Blue screen while using windows even in safe mode

    - by FATE
    I have this problem with Windows 7 after I detected and cleaned up some viruses with Nod32. problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1065 Additional information about the problem: BCCode: 50 BCP1: FFFFF900CA578010 BCP2: 0000000000000000 BCP3: FFFFF9600019619B BCP4: 0000000000000002 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\060312-34195-01.dmp C:\Users\Fatemeh\AppData\Local\Temp\WER-51215-0.sysdata.xml How can I prevent these crashes?

    Read the article

  • centos freezes with this error kernel: ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x0

    - by lakshman
    0 down vote favorite share [fb] share [tw] I am using centOs 5.5 version with raid 1 configuration the server freezes and goes to non response . the only thing i found on messages file is kernel: ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x0 The server is built recently Please let us know what is the problem the hard disk details are Model Number: ST500NM0011 Serial Number: Z1M02LT7 Firmware Revision: SN02

    Read the article

  • How to configure three IP address into single server

    - by user1363308
    I have Cisco device for call forwarding and three different system,I want to configure 15 and 16 server IP into 192.168.53.197 means eth0 --> 192.168.53.197 eth1 --> 192.168.16.15 eth2 --> 192.168.16.16 which work i have done with 15 and 16 individual , I will do some work on 197 after configuration eth1 and eth2. Means one system have three IP address but base IP address is 192.168.53.197

    Read the article

  • Linux with winbind, disable local users while AD is available?

    - by Salkin
    Routers and switches with RADIUS authentication can be configured such that login is disabled for locally configured users as long as the RADIUS server is available. If the RADIUS server becomes unavailable, they fall back to allowing login as a locally configured user. Is it possible to achieve the same effect with Linux machines using winbind to authenticate Active Directory users? I have a feeling it could be done with the right PAM configuration, but I'm not very far along on the PAM learning curve...

    Read the article

  • IBM Rational Application Developer V7.0.0

    - by Damo
    Hi When I try to start my local server in RAD it takes ages to start. In startserver.log it stays at the following log statement for about 5 minutes ADMU3100I: Reading configuration for server: server1 When it moves on from this log statement, the server starts as normal. I have tried creating a new server profile and starting a server with no projects but I get the same results. What could be the issue here? Any assistance would be greatly appreciated. Regards Damien

    Read the article

  • Website load perfectly from localhost but after 3 or 4 hours is not load from remote computer until restart iis

    - by kia
    I have a web application on IIS 7.5 and windows server 2008 r2. It's load perfectly from localhost but after 3 or 4 hours is not load from remote computer until restart iis or recycle pool. Users of this site are about 900 people. Some setting of my pool: .Net frame work version: v2.0 Manage pipe line mode: Integrated Enable 32-Bit applications: true Identity: Administrator Idle time-out: 120 Load user profile: false Rapid fail protection enabled: false Disable recycling for configuration changes: true

    Read the article

  • Group Policy is not being applied from Server 2003 to win7 client

    - by John Hoge
    Hi, I'm experimenting with Group Policy settings. My DC is running Server 2003, and the client I am using for this test is running Win7. I've restarted the client a few times, and tried running gpupdate/force for good measure. This machine is in it's own OU with a group policy applied to change one setting, Computer Configuration/Administrative Templates/Network/Offline Files. When I run MMC and look at Local Computer Policy on the client this setting shows up as "not configured". Thanks, John

    Read the article

  • Unable to uninstall SQL 2008 Instance(s)

    - by ichoudhury
    Windows 2008 R2 High Availability Cluster and we were just going through the first phase of configuration. Somebody accidentally loaded the instance incorrectly, so I was hopping to uninstall and reinstall. But when I approach the uninstall process, it fails with the following msg: Object reference not set to an instance of an object SQL instance not yet clustered (FYI) Any idea?

    Read the article

< Previous Page | 601 602 603 604 605 606 607 608 609 610 611 612  | Next Page >