Search Results

Search found 47301 results on 1893 pages for 'system matrix'.

Page 607/1893 | < Previous Page | 603 604 605 606 607 608 609 610 611 612 613 614  | Next Page >

• Restoring the exact state of a linux install to a different laptop with different sized drives and other hardware

  - by user259774

  I have an IBM running a Manjaro install that has already been used and settled into, with packages installed, browser profiles, etc, etc. The drive is 60gb, and it has a swap partition and an ext4 root partition. I need to move this profile to a Toshiba computer with a 320gb drive. How should I go about this? My inclination would be to shut down the toshiba, boot a live linux system, dd the whole 60gb drive to a file, boot the toshiba to a live system, then dd the file to its 320gb drive. Would this work? I know that it wouldn't with windows, but I believe this is an artificially imposed limitation from Microsoft. Is this correct, or is Linux similarly limited? If not, how could I go about this? Would clonezilla work, or would the hardware disparities prevent it from working?

  Read the article

• HP ProLiant Smart Array "lock up" code 0x11

  - by ewwhite

  I've a ProLiant DL580 G7 server that experienced a storage subsystem failure during production. The system appeared available and responded to pings, but all I/O access stalled (the system load must have been 100+). The ASR did not trigger at the specified watchdog timeout. I had to force a reboot from the ILO. During POST, I received the following error: A controller failure event occurred prior to this power-up. (Previous lock up code = 0x11) I haven't pulled the ADU report yet, but I'm curious as to what this error actually means. I was not responsible for the the installation, but can see that the firmware is very old. But if there's anything else I should know about the error, I'd like to know for the post-mortem report. edit - I should add that the server had 95 days of uptime prior to the lock up.

  Read the article

• Under kvm, Vista guest OS install halts on black screen

  - by Isaac Sutherland

  I am using kvm on my ubuntu-server-10.04 amd64 dual core PC. I am trying to install a Windows Vista guest OS. The installation proceeds properly until the system reboot halfway into the installation process, at which point it stops on a black screen and CPU usage goes to near zero. I created the vm with virt-install as follows: virt-install -n vista --connect qemu:///system -r 1024 -vcpus 2 \ --os-type windows --os-variant vista \ --virt-type kvm --accelerate \ -c /dev/sr0 \ --disk path=/dev/main/vista-hd \ --network bridge=br0 \ --vnc --noautoconsole Where /dev/sr0 is the physical drive with the vista installation DVD, and /dev/main/vista-hd is a 20-GB lvm logical volume I created. A number of people seem to have had success installing vista under KVM, but I haven't been able to determine what is causing my problem. Ideas anyone?

  Read the article

• WD My Passport detected but not assigned a drive letter

  - by abel

  I have a WD My Passport external drive which used to work fine on my Win7 x64 box until recently. Since the past few days, windows would not detect my external drive. However, Storage under disk management lists my external drive(which means windows can see my drive) but without a drive letter. I am not able to assign a drive letter(the option is grayed out). I installed EASUS Partition Manager which allows me to assign a drive letter, but fails to do so when I apply to save changes. What do i do to assign a drive letter to the drive or make windows to detect it as of old? The external drive works well on Win7 x32(dual boot, same system) and win7 x64 on another box. Update: cant comment from Opera Mini 6 @zeke the drive works absolutely fine on other Win7 boxes and on the dual boot win7 on the same system.

  Read the article

• Windows 7 won't read from NAS on LAN

  - by Alfy

  I've got a Linkstation NAS drive on a local network. Having just got a new laptop with Windows 7 Home Professional, I can no longer read anything of the drive. I've tried accessing the drive using \192.168.1.55\share, using ftp programs such as WinSCP, filezilla and even using firefox to hit ftp://192.168.1.55. The really annoying thing is that through these methods I can see the files on the drive, counting out any kind of connection issues. I can navigate through the NAS file system, but as soon as I try and copy a file off the NAS, things just stop working. Accessing the drive through a WindowsXP machine works fine. So far I've tried: Disabling firewalls Adding the LmCompatibilityLevel key to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa Using the 40 - 56 bit encryption instead of the 128 bit. Has anyone got any suggestions of what I can check or try. This is driving me crazy and I'm totally out of ideas? Thanks

  Read the article

• Switch computer off automatically when the internet is disconnected

  - by Vin

  Is there any free software that will detect the status of internet and shutdown the system when the internet disconnects? Or (more generally) can something run a task when the internet disconnects, and I can route it to shutdown the machine? I am downloading things overnight. But my problem is that sometimes the internet connection will be disconnected in the middle of the night, so there is no point in keeping the system running the rest of the night. So I need to avoid this problem by detecting the net connectivity.

  Read the article

• Unmounting a zfs pool while it is shared with sharenfs

  - by Ted W.

  I have a Solaris (open indiana) system which is getting poor disk write performance. In order to enable ZIL in this version of zfs I need to add a line to /etc/system. This will not take affect until I've unmounted and remounted the zpool. The trick is that this spool is shared via nfs to about 200 other servers to host users' home directories. I can guarantee that no users will be accessing the disks during this period of maintenance but I would like to avoid having to issue an unmount for 200 systems in order to unmount the disk on the Solaris box. My question is, with sharenfs, is it necessary to have all systems disconnected before unmounting the filesystem on the host? If it's possible, how do you go about it? I've tried unmounting already, the normal way, and it reports the disk is busy. There is no lsof in Solaris and pfiles (I think that's what it was) does not show anything obviously using the mounts.

  Read the article

• Can't the NetworkManager applet to appear in the Gnome panel in Ubuntu

  - by Nate

  I have researched this problem extensively and I can't seem to find an answer. In Ubuntu 10.04 LTS, I want to connect to my VPN through the NetworkManager applet. I installed all the network manager packages, including the gnome client. I understand I need to add the "Notification Area" to the panel, which I have done. I checked that the NetworkManager is running: nate@nate-desktop:~$ service network-manager status network-manager start/running, process 763 In /etc/NetworkManager/nm-system-settings.conf, I have added managed=true (don't know if this matters, but I saw it suggested on one forum): nate@nate-desktop:~$ more /etc/NetworkManager/nm-system-settings.conf # This file is installed into /etc/NetworkManager, and is loaded by # NetworkManager by default. To override, specify: '--config file' # during NM startup. This can be done by appending to DAEMON_OPTS in # the file: # # /etc/default/NetworkManager # [main] plugins=ifupdown,keyfile [ifupdown] #managed=false managed=true At this point, it looks like NetworkManager is running but it's not appearing in the NotificationArea of the panel. I don't know what else to try. Any ideas?

  Read the article

• Can't the NetworkManager applet to appear in the Gnome panel in Ubuntu

  - by Nate

  I have researched this problem extensively and I can't seem to find an answer. In Ubuntu 10.04 LTS, I want to connect to my VPN through the NetworkManager applet. I installed all the network manager packages, including the gnome client. I understand I need to add the "Notification Area" to the panel, which I have done. I checked that the NetworkManager is running: nate@nate-desktop:~$ service network-manager status network-manager start/running, process 763 In /etc/NetworkManager/nm-system-settings.conf, I have added managed=true (don't know if this matters, but I saw it suggested on one forum): nate@nate-desktop:~$ more /etc/NetworkManager/nm-system-settings.conf # This file is installed into /etc/NetworkManager, and is loaded by # NetworkManager by default. To override, specify: '--config file' # during NM startup. This can be done by appending to DAEMON_OPTS in # the file: # # /etc/default/NetworkManager # [main] plugins=ifupdown,keyfile [ifupdown] #managed=false managed=true At this point, it looks like NetworkManager is running but it's not appearing in the NotificationArea of the panel. I don't know what else to try. Any ideas?

  Read the article

• What the hell was THAT?!?

  - by Massimo

  My system is Windows XP SP3, updated with the latest patches. The PC is connected to a Cisco 877 ADSL router, which does NAT from the internal network to its single static public IP address. There are no forwarded ports, and the router's management console can only be accessed from the inside. I was doing two things: working on a remote office machine via VPN and browsing some web pages on the Cisco web site. The remote network is absolutely safe (it's a lab network, four virtual servers, no publicly accessible services and no users at all; also, none of what I'm going to describe ever happened there). The Cisco web site... well, I suppose is quite safe, too. Suddenly, something happened. Strange popups appears anywhere; programs claiming they're "antimalware", "antispyware" et so on begins autoinstalling; fake Windows Update and Security Center icons pop up in the system tray. svchost.exe began crashing repeatedly. Then, finally, after some minutes of this... BSOD. And, upon rebooting, BSOD again. Even in safe mode. Ok, that was obviously some virus/trojan/whatever. I had to install a new copy of Windows on another partition to clean things up. I found strange executables, services and DLLs almost anywhere. Amongst the other things, user32.dll and ndis.sys had been replaced. A fake software called "Antimalware Doctor" had been installed. There were services with completely random names or even GUIDs (!), and also ones called "IpSect" and "Darkness". There were executable files without an .exe extension. There were even two boot-class drivers, which I'm quite sure are the ones that finally caused the system to crash. A true massacre. Ok, now the questions: What the hell was that?!? It was something more than a simple virus! How did it manage to attack my computer, as I am behind a firewall and was not doing anything even only potentially harmful on the web at the time?

  Read the article

• VPN Server Problem

  - by vikas-2007bajaj

  Hi, I have Configure VPN Server for Online share Trading. I have so many VPN Clients in my VPN Server. Sometimes my VPN Clients disconnected from Systems but it shows in system tray i.e. connected but we are not able to access my application on the server.Then I disabled my Local area connection on client machine but it doesn't effect until I restart my System again.Firstly I want to know Task Manager Service for my VPN Client & how this problem can be remove.Waiting for reply. Thanks, Vikas Bajaj

  Read the article

• Virtualizing WindowsXP on Linux Fedora 12 for Photoshop....

  - by Rae

  I am running a Linux server from 2000, I have Fedora12 installed as the OS. I know you can virtualize Windows XP on the system to be able to run Windows programs, but the problem is I My server has only one 1333Mhz Pentium 3 processor and 1G of Ram. granted this is a pretty kick ass computer for the day, but lacking the second processor I'm afraid that I will not be able to run Windows virtualization to support Photoshop CS3. Is there any program out there that runs similar to Photoshop, like windows Digital Image suite 10, that will run smoothly in my Linux Fedora 12 environment? or can I virtualize windows and run the Windows digital image suite 10, without slowing or corrupting my system?

  Read the article

• Making Sure Which Partition to Choose with Linux Dual Boot?

  - by user128360

  In the Linux Mint 12 LXDE the partitions are listed as nsd 1, 2, 3, 4, though I have a Windows 8 CP installation on one of the two partitions on the single hard drive. The space usage is differing in both system calculations, though still relateable. Where the partition is at around 20 GB usage in Windows 8 it will be at around 24 GB in the Linux installation menu. I am just wondering is there a certain way to choose the right partition? Also in the drop down menu regarding the boot loader, there are multiple options, which one would be the one to be chosen in this case? What about the system-reserve partition of Windows 7 (the one I am trying to overwrite)? What is happening with that?

  Read the article

• How to add a web folder via command line (Windows)

  - by Ryan

  I am trying to add a web folder via command line in windows. At first I though I should use the "net use" command, but when I tried I kept getting System error 67: C:net use * http://dev.subdomain.domain.tdl/dav/ the user name for 'dev.restech.niu.edu': correctusername the password for dev.restech.niu.edu: System error 67 has occurred. The network name cannot be found. The url I used works in a browser. It's an Apache dav on basic auth LDAP authentication method being used. Here's the thing... I CAN create a web folder when I use the "Add a network place" wizard. When I do net use, I don't see it listed in the prompt that follows. What utility do I need to use to mount a web folder in command line?

  Read the article

• Browsers ignoring hosts file

  - by madkris

  Until recently my browsers started to ignore my hosts file. I have Windows 7 operating system installed. 192.168.0.5 livesite.com I have tried: Clearing browser cache Issued "ipconfig /flushdns" from the command line Issued "ping livesite.com" from the command line (response was "Reply from 192.168.0.5: bytes=32 time=1ms TTL=128") Restarting unit Backing up original hosts file and making a new one Checking lmhosts.sam (everything is commented out) Connecting directly to modem using cable Checked \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Tried it on another laptop with exactly the specs as I have Then I tried Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser ok but only for a sec) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser not ok) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Any idea why it worked for a moment? Or better yet anything I havent tried or some error I may have overlooked?

  Read the article

• Are there any problems migrating users from OSX 10.4.11 server to 10.6.6. server using WGM?

  - by Geoff Hardman

  I have just set up a new Mac server running 10.6.6. Installation went smoothly and all appears ok. Can create a new user through WGM and logon to the server from one of our local client systems. Imported the old users from the 10.4 system using WGM but the new system will not create home directories for these users and will not let them log on. I have read that there are issues using this method but can not find any detail as to why. Not wishing to recreate over 350 users from scratch I am looking for an easier solution. Can anyone help? The new server is 10.6.6. We use Open Directory and AFP. The paths are the same as the old server.

  Read the article

• Docking Station Disabling/Enabling Network Connection

  - by bryan_cook

  Whenever I dock my laptop onto my docking station, Windows disables my Wireless Network Connection and enables my Wired Network Connection. Whenever I undock my laptop, Windows disables my Wired Network Connection and enables my Wireless Network Connection. Is there a way to disable this feature? After Windows performs the automatic disabling/enabling, I run into errors when I try to disable the now-enabled connection, specifically "It is not possible to disable the connection at this time. This connection may be using one or more protocols that do not support Plug-and-Play, or it may have been initiated by another user or the system account." I'm assuming the latter portion of the error is true ... my network connections are being enabled/disabled under a system account. Regardless, I'd just like to disable the feature altogether. For reference, I'm working with Windows XP Professional on a Dell Latitude D630. Thanks in advance!

  Read the article

• Degraded RAID5 and no md superblock on one of remaining drive

  - by ark1214

  This is actually on a QNAP TS-509 NAS. The RAID is basically a Linux RAID. The NAS was configured with RAID 5 with 5 drives (/md0 with /dev/sd[abcde]3). At some point, /dev/sde failed and drive was replaced. While rebuilding (and not completed), the NAS rebooted itself and /dev/sdc dropped out of the array. Now the array can't start because essentially 2 drives have dropped out. I disconnected /dev/sde and hoped that /md0 can resume in degraded mode, but no luck.. Further investigation shows that /dev/sdc3 has no md superblock. The data should be good since the array was unable to assemble after /dev/sdc dropped off. All the searches I done showed how to reassemble the array assuming 1 bad drive. But I think I just need to restore the superblock on /dev/sdc3 and that should bring the array up to a degraded mode which will allow me to backup data and then proceed with rebuilding with adding /dev/sde. Any help would be greatly appreciated. mdstat does not show /dev/md0 # cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md5 : active raid1 sdd2[2](S) sdc2[3](S) sdb2[1] sda2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdd4[3] sdc4[2] sdb4[1] sda4[0] 458880 blocks [5/4] [UUUU_] bitmap: 40/57 pages [160KB], 4KB chunk md9 : active raid1 sdd1[3] sdc1[2] sdb1[1] sda1[0] 530048 blocks [5/4] [UUUU_] bitmap: 33/65 pages [132KB], 4KB chunk mdadm show /dev/md0 is still there # mdadm --examine --scan ARRAY /dev/md9 level=raid1 num-devices=5 UUID=271bf0f7:faf1f2c2:967631a4:3c0fa888 ARRAY /dev/md5 level=raid1 num-devices=2 UUID=0d75de26:0759d153:5524b8ea:86a3ee0d spares=2 ARRAY /dev/md0 level=raid5 num-devices=5 UUID=ce3e369b:4ff9ddd2:3639798a:e3889841 ARRAY /dev/md13 level=raid1 num-devices=5 UUID=7384c159:ea48a152:a1cdc8f2:c8d79a9c With /dev/sde removed, here is the mdadm examine output showing sdc3 has no md superblock # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff0e - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 0 8 3 0 active sync /dev/sda3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdb3 /dev/sdb3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff20 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 1 8 19 1 active sync /dev/sdb3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdc3 mdadm: No md superblock detected on /dev/sdc3. [~] # mdadm --examine /dev/sdd3 /dev/sdd3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff44 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 3 8 51 3 active sync /dev/sdd3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed fdisk output shows /dev/sdc3 partition is still there. [~] # fdisk -l Disk /dev/sdx: 128 MB, 128057344 bytes 8 heads, 32 sectors/track, 977 cylinders Units = cylinders of 256 * 512 = 131072 bytes Device Boot Start End Blocks Id System /dev/sdx1 1 8 1008 83 Linux /dev/sdx2 9 440 55296 83 Linux /dev/sdx3 441 872 55296 83 Linux /dev/sdx4 873 977 13440 5 Extended /dev/sdx5 873 913 5232 83 Linux /dev/sdx6 914 977 8176 83 Linux Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 66 530113+ 83 Linux /dev/sda2 67 132 530145 82 Linux swap / Solaris /dev/sda3 133 182338 1463569695 83 Linux /dev/sda4 182339 182400 498015 83 Linux Disk /dev/sda4: 469 MB, 469893120 bytes 2 heads, 4 sectors/track, 114720 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/sda4 doesn't contain a valid partition table Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 * 1 66 530113+ 83 Linux /dev/sdb2 67 132 530145 82 Linux swap / Solaris /dev/sdb3 133 182338 1463569695 83 Linux /dev/sdb4 182339 182400 498015 83 Linux Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 1 66 530125 83 Linux /dev/sdc2 67 132 530142 83 Linux /dev/sdc3 133 182338 1463569693 83 Linux /dev/sdc4 182339 182400 498012 83 Linux Disk /dev/sdd: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdd1 1 66 530125 83 Linux /dev/sdd2 67 132 530142 83 Linux /dev/sdd3 133 243138 1951945693 83 Linux /dev/sdd4 243139 243200 498012 83 Linux Disk /dev/md9: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md9 doesn't contain a valid partition table Disk /dev/md5: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md5 doesn't contain a valid partition table

  Read the article

• Can a faulty DNS record prevent networking?

  - by Bob

  My server's network interfaces are not available anymore since yesterday evening. I didn't change anything, but I added a new DNS-record shortly before. Unfortunately, the web interface I used to add this DNS record escaped some characters, so I've got a faulty DNS record: example.com 86400 IN TXT "\"v=spf1 mx a -all\"" However, this is the only unusual thing I could notice about this. Is it possible that the \-characters in my DNS record are confusing for some routers? Or could it be the system itself which is confused by this (it's a Debian Lenny system). Unfortunately, I can't quick-test it because of the long TTL of the record.

  Read the article

• How can I exceed the 60% Memory Limit of IIS7

  - by evilknot

  Pardon if this is more stackoverflow vs. serverfault. It seems to be on the border. We have an application that caches a large amount of product data for an e-commerce application using ASP.NET caching. This is a dictionary object with 65K elements, and our calculations put the object's size at ~10GB. Problem: The amount of memory the object consumes seems to be far in excess of our 10GB calculation. BIGGEST CONCERN: We can't seem to use over 60% of the 32GB in the server. What we've tried so far: In machine.config/system.web (sf doesn't allow the tags, pardon the formatting): processModel autoConfig="true" memoryLimit="80" In web.config/system.web/caching/cache (sf doesn't allow the tags, pardon the formatting): privateBytesLimit = "20000000000" (and 0, the default of course) percentagePhysicalMemoryUsedLimit = "90" Environment: Windows 2008R2 x64 32GB RAM IIS7 Nothing seems to allow us to exceed the 60% value. See attached screenshot of taskman.

  Read the article

• Is it possible to install Windows 8 on the SanDisk ReadyCache 32GB SSD drive?

  - by halil ibrahim

  I bought the SanDisk ReadyCache 32GB SSD drive this week. I didn't know about the caching stuff and thought that I would be able to install Windows 8 on it. Now I'm using it as a cache drive with the ExpressCache software. But I wonder if it is possible to use this SSD as a primary system drive with an operating system installed on it. I've tried to format the disk via Windows Disc Manager Tool, but the format option is disabled. Only delete and information options are allowed. Can you help me with this?

  Read the article

• eMail with Conflicting Headers not blocked in MS365

  - by John Meredith Langstaff

  On occasion, a company receives eMail with two header fields (“Received” and “From”) containing data that contradict each other drastically. Should they not expect their anti-spam system to flag or block items with contradictions in these fields? For example, they received an eMail which contained [almost exactly] these two headers: Received: from [107.52.51.26] by web315204.mail.ne1.yahoo.com via HTTP; Mon,28 Oct 2013 04:28:04 PDT From: Barry Smith [email protected] Obviously, eMail from an @att.net address isn’t coming from a server on the domain yahoo.com, and Yahoo isn’t forwarding AT&T’s eMail. There were no other headers indicating that the item was sent “OnBehalfOf”, or “Forwarded-by”, or “By_Proxy” or any other such. Should I write a utility to scan incoming eMail for such conflicts, or look more closely at their spam filtering to block this kind of eMail? Their eMail system is Hosted Exchange on MS-365. My central question is, where specifically do I look in MS-365 to get this type of conflicted eMail blocked?

  Read the article

• My saved drafts become unread email in Windows Live Mail and Gmail IMAP

  - by Valamas

  I have setup windows live mail with my gmail account in IMAP mode. When I draft an email and save it. It saves in the drafts automatically. Within a minute, my WLM sound alerts new mail and shows mail icon in the system tray. However, this is for the draft I have saved which appears unread. To make the mail notification icon go away in the system tray, I go off and mark the draft as read. This repetition is tedious and distracting. How can I avoid this annoyance? thanks

  Read the article

• Flash not Working in Google Chrome for Mac

  - by Blakeasd

  Flash has randomly stopped working in Google Chrome for Mac. All that appears is a white flash then nothing. I can hear sound, and when I right click on where Flash is supposed to be I see the Flash Player options. I have completely reinstalled Chrome, including deleting all of its support files. I reinstalled my system flash and tried making Chrome use my system flash, but nothing works. Flash is fine in Safari, but not in Chrome. How do I fix this? I am running the latest Google Chrome Dev build (21.0.1171.0) and Mac OS X 10.7.4 . Thanks!

  Read the article

• nginx, php-cgi and "No input file specified."

  - by Stephen Belanger

  I'm trying to get nginx to play nice with php-cgi, but it's not quite working how I'd like. I'm using some set variables to allow for dynamic host names--basically anything.local. I know that stuff is working because I can access static files properly, however php files don't work. I get the standard "No input file specified." error which normally occurs when the file doesn't exist, but it definitely does exist and the path is correct because I can access the static files in the same path. It could possibly be a permissions thing, but I'm not sure how that could be an issue. I'm running this on Windows under my own user account, so I think it should have permission unless php-cgi is running under a different user without me telling it to. . Here's my config; worker_processes 1; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; gzip on; server { # Listen for HTTP listen 80; # Match to local host names. server_name *.local; # We need to store a "cleaned" host. set $no_www $host; set $no_local $host; # Strip out www. if ($host ~* www\.(.*)) { set $no_www $1; rewrite ^(.*)$ $scheme://$no_www$1 permanent; } # Strip local for directory names. if ($no_www ~* (.*)\.local) { set $no_local $1; } # Define default path handler. location / { root ../Users/Stephen/Documents/Work/$no_local.com/hosts/main/docs; index index.php index.html index.htm; # Route non-existent paths through Kohana system router. try_files $uri $uri/ /index.php?kohana_uri=$request_uri; } # pass PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ \.php$ { root ../Users/Stephen/Documents/Work/$no_local.com/hosts/main/docs; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi.conf; } # Prevent access to system files. location ~ /\. { return 404; } location ~* ^/(modules|application|system) { return 404; } } }

  Read the article

< Previous Page | 603 604 605 606 607 608 609 610 611 612 613 614  | Next Page >