Search Results

Search found 69138 results on 2766 pages for 'oracle data mining'.

Page 608/2766 | < Previous Page | 604 605 606 607 608 609 610 611 612 613 614 615  | Next Page >

• UIDs for data objects in MySQL

  - by Callash

  Hi there, I am using C++ and MySQL. I have data objects I want to persist to the database. They need to have a unique ID for identification purposes. The question is, how to get this unique ID? Here is what I came up with: 1) Use the auto_increment feature of MySQL. But how to get the ID then? I am aware that MySQL offers this "SELECT LAST_INSERT_ID()" feature, but that would be a race condition, as two objects could be inserted quite fast after each other. Also, there is nothing else that makes the objects discernable. Two objects could be created pretty much at the same time with exactly the same data. 2) Generate the UID on the C++ side. No dice, either. There are multiple programs that will write to and read from the database, who do not know of each other. 3) Insert with MAX(uid)+1 as the uid value. But then, I basically have the same problem as in 1), because we still have the race condition. Now I am stumped. I am assuming that this problem must be something other people ran into as well, but so far, I did not find any answers. Any ideas?

  Read the article

• Setting CSS attributes on Change using jQuery

  - by Nick B

  I want to change css visibility and display attributes using jQuery on click when the state of another div's visibility attribute changes. (Many apologies for the obfuscated markup, but needing to manipulate someone else's construction): There are four instances of [data-label="Checkbox"] [data-label="Checked"] in this page. I want to set [data-label="trash"] and [data-label="Sort Options"] to visibility: visible; display: [empty value] when any of the [data-label="Checkbox"] [data-label="Checked"]'s attributes changes to 'visibility', 'visible'. Else, if none of [data-label="Checkbox"] [data-label="Checked"]'s have the attribute 'visibility', 'visible', I want to set [data-label="trash"] and [data-label="Sort Options"] back to their initial states: display: none; visibility: hidden;. Here's the markup: <div data-label="Sort Options" style="display: none; visibility: hidden;"> <div data-label="trash" style="display: none; visibility: hidden;"></div> </div> <div data-label="Checkbox"> <div data-label="Unchecked"></div> <div data-label="Checked" style="display: none; visibility: hidden;"></div> </div> Here is what I have tried unsuccessfully: $('[data-label="Checkbox"]').click(function() { if ('[data-label="Checkbox"] [data-label="Checked"]').css('visibility', 'visible') { $('[data-label="trash"], [data-label="Sort Options"]').css({'display': '', 'visibility': 'visible'}); } else { $('[data-label="trash"], [data-label="Sort Options"]').css({'display': 'none', 'visibility': 'hidden'}); } }); Any help would be greatly appreciated! Thanks

  Read the article

• Generic file container for quick read of data

  - by DreamCodeR

  Since there are some major privacy issues with alot of social networking sites I am trying to think about alternatives. One is to let the user keep all the information stored in some kind of file container. Now, I haven't found a single type of container that can hold "generic" information. Only for audio/video. What I want is a container that can be read by PHP with some kind of index file that lists up the users pictures in a image/ directory in the container, FOAF files (or some alternative XML-file describing users information and friends, etc.). My thoughts was to let the user keep all their information and data stored in a container that can be imported/exported and deleted from my server (the prototype social networking site I am trying to create), and then uploaded to another site that might use the same format (not that I think that will ever happen, but the user still keeps all their pictures, data, comments, messages, etc). The only thing I have come up with yet is to create a tar archive with the Archive_tar library which extracts and creates Tar-archives with an index-file describing which files are holding the messages (there might be several so each file won't be so large), what pictures are in the image/ folder and what are their names and what comments they have gotten etc. Maybe also the permissions for viewing each type of content. Does there exist any generic file format of a container that I can use to keep all this information in one file with a tree-like index file? Or must i try and create something like this myself?

  Read the article

• How to store arbitrary data for some HTML tags

  - by nickf

  I'm making a page which has some interaction provided by javascript. Just as an example: links which send an AJAX request to get the content of articles and then display that data in a div. Obviously in this example, I need each link to store an extra bit of information: the id of the article. The way I've been handling it in case was to put that information in the href link this: <a class="article" href="#5"> I then use jQuery to find the a.article elements and attach the appropriate event handler. (don't get too hung up on the usability or semantics here, it's just an example) Anyway, this method works, but it smells a bit, and isn't extensible at all (what happens if the click function has more than one parameter? what if some of those parameters are optional?) The immediately obvious answer was to use attributes on the element. I mean, that's what they're for, right? (Kind of). <a articleid="5" href="link/for/non-js-users.html"> In my recent question I asked if this method was valid, and it turns out that short of defining my own DTD (I don't), then no, it's not valid or reliable. A common response was to put the data into the class attribute (though that might have been because of my poorly-chosen example), but to me, this smells even more. Yes it's technically valid, but it's not a great solution. Another method I'd used in the past was to actually generate some JS and insert it into the page in a <script> tag, creating a struct which would associate with the object. var myData = { link0 : { articleId : 5, target : '#showMessage' // etc... }, link1 : { articleId : 13 } }; <a href="..." id="link0"> But this can be a real pain in butt to maintain and is generally just very messy. So, to get to the question, how do you store arbitrary pieces of information for HTML tags?

  Read the article

• regex numeric data processing: match a series of numbers greater than X

  - by Mu Mind

  Say I have some data like this: number_stream = [0,0,0,7,8,0,0,2,5,6,10,11,10,13,5,0,1,0,...] I want to process it looking for "bumps" that meet a certain pattern. Imagine I have my own customized regex language for working on numbers, where [[ =5 ]] represents any number = 5. I want to capture this case: ([[ >=5 ]]{3,})[[ <3 ]]{2,} In other words, I want to begin capturing any time I look ahead and see 3 or more values = 5 in a row, and stop capturing any time I look ahead and see 2+ values < 3. So my output should be: >>> stream_processor.process(number_stream) [[5,6,10,11,10,13,5],...] Note that the first 7,8,... is ignored because it's not long enough, and that the capture ends before the 0,1,0.... I'd also like a stream_processor object I can incrementally pass more data into in subsequent process calls, and return captured chunks as they're completed. I've written some code to do it, but it was hideous and state-machiney, and I can't help feeling like I'm missing something obvious. Any ideas to do this cleanly?

  Read the article

• Databound Label text displays old data upon save. Re-open record and data is correct?

  - by Mike Hestness

  I have a windows forms application. I have a main form and I have a button on this form to set a "Qualified" date/time stamp. I have a Databound label control that I set the value when the user clicks the button. This date/time stamp is working as far as displaying but when you click the save button it either shows blank or the previous date/time. If you then then close the record and re-open it the new date/time value is displayed so the data is getting to the database it's just not persisting in the dataset as new data?? Not sure why the databinding isn't refreshing the value. I have noticed this behavior even if I use a textbox, same thing if I do it programatically. If I manually type in a value it persists?? Here is the code I'm using in the click event of my button: string result = string.Empty; string jobOrderID = UnitOfWork.MasterDSBS.MJOBO[0].JC_IDNO.ToString(); string timeNow = DateTime.Now.ToString(); //Call Web service to make the update RadServices.Service1 rsWeb = new RadServices.Service1(); result = rsWeb.SetQualifiedDate(timeNow, jobOrderID ); //Changed the qualified label text. _btnQualify.Text = "Qualified"; rlQualifiedDate.Text = timeNow;

  Read the article

• Jquery - $.(post) data response not consistent with PHP

  - by Sasha

  Jquery code: var code = $('#code'), id = $('input[name=id]').val(), url = '<?php echo base_url() ?>mali_oglasi/mgl_check_paid'; code.on('focusout', function(){ var code_value = $(this).val(); if(code_value.length != 16 ) { if ($('p[role=code_msg]').length != 0 ) $('p[role=code_msg]').remove() ; code.after('<p role=code_msg>Pogrešan kod je unešen.</p>'); } else { if ($('p[role=code_msg]').length != 0 ) $('p[role=code_msg]').remove() ; $.post(url, {id : id, code : code_value}, function(data){ if(data != 'TRUE'){ code.after('<p role=code_msg>Uneti kod je neispravan.</p>'); } else { code.after('<p role=code_msg>Status malog oglasa je promenjen.</p>'); code.after(create_image()); code.remove(); } }); } }); PHP (Codeigniter) code: function mgl_check_paid() { $code = $this->input->post('code'); $id = $this->input->post('id'); echo ($this->mgl->mgl_check_paid($code, $id)) ? 'TRUE' : 'FALSE'; } Problem is following: When code is sent and if it is correct, PHP part will echo TRUE, and JS will execute ELSE part (after post), but for some reason it is not doing that (it is executing the first part of the statment)? What is wrong with this code?

  Read the article

• Drupal 7 - I can't pass post data in module function

  - by user2603290

  I can't pass post data in my custom module. filenames: mymodule.info mymodule.mod .info name = My Module description = My custom module. package = DEV version = 1.0 core = 7.x .module <?php function mymodule_menu() { $items = array(); $items['getcountries'] = array( 'title' => 'Get Countries', 'page callback' => 'getcountries', 'access arguments' => array('access content'), 'type' => MENU_CALLBACK, ); $items['getstates'] = array( 'title' => 'Get States', 'page callback' => 'getstates', 'access arguments' => array('access content'), 'type' => MENU_CALLBACK, ); return $items; } function getcountries() { $result = db_query("select distinct(country) from region"); $jsonarray = Array(); foreach ($result as $record) { $jsonarray[] = array( 'item' => $record->country, 'value' => $record->country ); } $json = json_encode($jsonarray); echo $json; } function getstates() { echo $_POST["test"]; } Ajax call $(document).ready(function(){ $.ajax({ url: '/getstates', type: 'POST', data: '{"test":"1"}', success : function () { alert('ok'); }, error : function (jqXHR, textStatus, errorThrown) { alert('error'); } }); }); The first item "getcountries" is working fine however the second one is not. I can browse to http://mysite.com/getstates ok but when I call this function using ajax it is not passing the value of "test" which is "1" to $_POST["test"]. I am new to Drupal so I am positive that I miss something here. I thought I need a new set of eyes.

  Read the article

• Best Methods for Dynamically Creating New Objects

  - by frankV

  I'm looking for a method to dynamically create new class objects during runtime of a program. So far what I've read leads me to believe it's not easy and normally reserved for more advanced program requirements. What I've tried so far is this: // create a vector of type class vector<class_name> vect; // and use push_back (method 1) vect.push_back(*new Object); //or use for loop and [] operator (method 2) vect[i] = *new Object; neither of these throw errors from the compiler, but I'm using ifstream to read data from a file and dynamically create the objects... the file read is taking in some weird data and occasionally reading a memory address, and it's obvious to me it's due to my use/misuse of the code snippet above. The file read code is as follows: // in main ifstream fileIn fileIn.open( fileName.c_str() ); // passes to a separate function along w/ vector loadObjects (fileIn, vect); void loadObjects (ifstream& is, vector<class_name>& Object) { int data1, data2, data3; int count = 0; string line; if( is.good() ){ for (int i = 0; i < 4; i++) { is >> data1 >> data2 >> data3; if (data1 == 0) { vect.push_back(*new Object(data2, data3) ) } } } }

  Read the article

• MySql - JSON data not showing in html

  - by Ramzie

  I'm trying to create a drop down list from a MySql. The php is successfully fetching the data from the MySql. But my problem is the data is not showing on the drop down list in my HTML page? json_mysql_data2.php header("Content-Type: application/json"); require_once("con.php"); $i=0; $jsonData = array(); foreach ($conn_db->query("SELECT customerID FROM customers WHERE furniture='33' ") as $result){ $i++; $jsonData["article".$i]=$result['customerID']; } echo json_encode($jsonData); myJS.js $(document).ready(function(){ var ddlist = document.getElementById("ddlist"); var hr = new XMLHttpRequest(); hr.open("GET", "json_mysql_data2.php", true); hr.setRequestHeader("Content-type", "application/x-www-form-urlencoded"); hr.onreadystatechange = function() { if(hr.readyState == 4 && hr.status == 200) { var d = JSON.parse(hr.responseText); for(var o in d){ if(d[o].title){ ddlist.innerHTML += '</option><option value='+d[o].title+'</option>'; } } } } hr.send("null"); ddlist.innerHTML = "Loading Customer ID...."; }); html <script src="myJS.js" type="text/javascript"></script> </head> <body> <div class="dlist"> Customer ID: <select id='EmpLst' name="dwlist" onchange='document.getElementById("val1").value = this.value;'><option value="">SELECT STUDENT ID</option> <div id="ddlist"></div> </select> </div>

  Read the article

• cPanel Virtfs won't umount

  - by JPerkSter

  Anyone have any experience with virtfs on cPanel servers? I can't seem to get them to unmount, as they say they are already unmounted: [root@Server ~]# cat /proc/mounts | grep user /dev/root /home/virtfs/user/lib ext3 rw,errors=continue,data=ordered 0 0 /dev/root /home/virtfs/user/opt ext3 rw,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/lib ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/sbin ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/share ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/bin ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/man ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/X11R6 ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/kerberos ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/libexec ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/local/bin ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/local/share ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/local/Zend ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/local/IonCube ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/include ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda3 /home/virtfs/user/usr/local/lib ext3 rw,nodev,errors=continue,data=ordered 0 0 /dev/sda2 /home/virtfs/user/var/spool ext3 rw,nodev,noatime,nodiratime,errors=continue,data=ordered 0 0 /dev/sda2 /home/virtfs/user/var/lib ext3 rw,nodev,noatime,nodiratime,errors=continue,data=ordered 0 0 /dev/sda2 /home/virtfs/user/var/cpanel ext3 rw,nodev,noatime,nodiratime,errors=continue,data=ordered 0 0 /dev/sda2 /home/virtfs/user/var/run ext3 rw,nodev,noatime,nodiratime,errors=continue,data=ordered 0 0 /dev/sda2 /home/virtfs/user/var/log ext3 rw,nodev,noatime,nodiratime,errors=continue,data=ordered 0 0 /dev/sda6 /home/virtfs/user/tmp ext3 rw,nosuid,nodev,noexec,noatime,errors=continue,data=ordered 0 0 /dev/root /home/virtfs/user/bin ext3 rw,errors=continue,data=ordered 0 0 [root@Server ~]# for i in cat /proc/mounts |grep virtfs |grep user |awk '{print$2}'; do umount $i; done umount: /home/virtfs/user/lib: not mounted umount: /home/virtfs/user/opt: not mounted umount: /home/virtfs/user/usr/lib: not mounted umount: /home/virtfs/user/usr/sbin: not mounted umount: /home/virtfs/user/usr/share: not mounted umount: /home/virtfs/user/usr/bin: not mounted umount: /home/virtfs/user/usr/man: not mounted umount: /home/virtfs/user/usr/X11R6: not mounted umount: /home/virtfs/user/usr/kerberos: not mounted umount: /home/virtfs/user/usr/libexec: not mounted umount: /home/virtfs/user/usr/local/bin: not mounted umount: /home/virtfs/user/usr/local/share: not mounted umount: /home/virtfs/user/usr/local/Zend: not mounted umount: /home/virtfs/user/usr/local/IonCube: not mounted umount: /home/virtfs/user/usr/include: not mounted umount: /home/virtfs/user/usr/local/lib: not mounted umount: /home/virtfs/user/var/spool: not mounted umount: /home/virtfs/user/var/lib: not mounted umount: /home/virtfs/user/var/cpanel: not mounted umount: /home/virtfs/user/var/run: not mounted umount: /home/virtfs/user/var/log: not mounted umount: /home/virtfs/user/tmp: not mounted umount: /home/virtfs/user/bin: not mounted umount: /home/virtfs/user/dev: not mounted umount: /home/virtfs/user/proc: not mounted

  Read the article

• How to implement multi-source XSLT mapping in 11g BPEL

  - by [email protected]

  In SOA 11g, you can create a XSLT mapper that uses multiple sources as the input. To implement a multi-source mapper, just follow the instructions below, Drag and drop a Transform Activity to a BPEL process Double-click on the Transform Activity, the Transform dialog window appears. Add source variables by clicking the Add icon and selecting the variable and part of the variable as needed. You can select multiple input variables. The first variable represents the main XML input to the XSL mapping, while additional variables that are added here are defined in the XSL mapping as input parameters. Select the target variable and its part if available. Specify the mapper file name, the default file name is xsl/Transformation_%SEQ%.xsl, where %SEQ% represents the sequence number of the mapper. Click OK, the xls file will be opened in the graphical mode. You can map the sources to the target as usual. Open the mapper source code, you will notice the variable representing the additional source payload, is defined as the input parameter in the map source spec and body<mapSources>    <source type="XSD">      <schema location="../xsd/po.xsd"/>      <rootElement name="PurchaseOrder" namespace="http://www.oracle.com/pcbpel/po"/>    </source>    <source type="XSD">      <schema location="../xsd/customer.xsd"/>      <rootElement name="Customer" namespace="http://www.oracle.com/pcbpel/Customer"/>      <param name="v_customer" />    </source>  </mapSources>...<xsl:param name="v_customer"/> Let's take a look at the BPEL source code used to execute xslt mapper. <assign name="Transform_1">            <bpelx:annotation>                <bpelx:pattern>transformation</bpelx:pattern>            </bpelx:annotation>            <copy>                <from expression="ora:doXSLTransformForDoc('xsl/Transformation_1.xsl',bpws:getVariableData('v_po'),'v_customer',bpws:getVariableData('v_customer'))"/>                <to variable="v_invoice"/>            </copy>        </assign> You will see BPEL uses ora:doXSLTransformForDoc XPath function to execute the XSLT mapper.This function returns the result of  XSLT transformation when the xslt template matching the document. The signature of this function is  ora:doXSLTransformForDoc(template,input, [paramQName, paramValue]*).Wheretemplate is the XSLT mapper nameinput is the string representation of xml input, paramQName is the parameter defined in the xslt mapper as the additional sourceparameterValue is the additional source payload. You can add more sources to the mapper at the later stage, but you have to modify the ora:doXSLTransformForDoc in the BPEL source code and make sure it passes correct parameter and its value pair that reflects the changes in the XSLT mapper.So the best practices are : create the variables before creating the mapping file, therefore you can add multiple sources when you define the transformation in the first place, which is more straightforward than adding them later on. Review ora:doXSLTransformForDoc code in the BPEL source and make sure it passes the correct parameters to the mapper.

  Read the article

• Using Managed Beans with your ADF Mobile Client Applications

  - by [email protected]

  Did you know it's easy to extend your ADF Mobile Client application with a Managed Bean just like it is with an ADF web application?  Here's how: Using the New Gallery (File -> New), create a new Java class.  This class should extend oracle.adfnmc.el.utils.BeanResolver.         Add this java class as a managed bean: Go to your task flow, select the Overview tab at the bottom and go to the Managed Bean section.  Add an entry and name your new Managed Bean and point to the java class you just created.        Add your custom methods and properties to your java class   Since reflection is not supported in the J2ME version on some platforms (BlackBerry), you need to provide dispatch code if you want to invoke/access any of your methods/properties from EL.  Here's a sample:  MyBeanClass.java    Use Expression Language (EL) to access your properties and invoke your methods on your MCX pages.  Here's an sample:     <?xml version="1.0" encoding="UTF-8" ?><amc:view xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"          xmlns:amc="http://xmlns.oracle.com/jdev/amc">  <amc:form id="form0">    <amc:menuControl refId="menu0"/>    <amc:panelGroupLayout id="panelGroupLayout1" width="100%">      <amc:panelGroupLayout id="panelGroupLayout2" layout="horizontal"                            width="100%">        <amc:image id="image1" source="logo_sm.png"/>        <amc:outputText value="Home" id="outputText1" verticalAlign="center"                        fontSize="20" fontWeight="bold"                        foregroundColor="#ff0000"/>      </amc:panelGroupLayout>      <amc:commandLink text="#{MyBean.property1}" id="commandLink1"                       actionListener="#{MyBean.doFoo}"                       foregroundColor="#0000ff" action="patientlist"/>    </amc:panelGroupLayout>  </amc:form>  <amc:menu type="main" id="menu0">    <amc:menuGroup id="menuGroup1">      <amc:commandMenuItem id="commandMenuItem1" action="exit" label="Exit"                           index="1" weight="0"/>    </amc:menuGroup>  </amc:menu></amc:view> 

  Read the article

• Trouble updating my datagrid in WPF

  - by wrigley06

  As the title indicates, I'm having trouble updating a datagrid in WPF. Basically what I'm trying to accomplish is a datagrid, that is connected to a SQL Server database, that updates automatically once a user enters information into a few textboxes and clicks a submit button. You'll notice that I have a command that joins two tables. The data from the Quote_Data table will be inserted by a different user at a later time. For now my only concern is getting the information from the textboxes and into the General_Info table, and from there into my datagrid. The code, which I'll include below compiles fine, but when I hit the submit button, nothing happens. This is the first application I've ever built working with a SQL Database so many of these concepts are new to me, which is why you'll probably look at my code and wonder what is he thinking. public partial class MainWindow : Window { public MainWindow() { InitializeComponent(); } public DataSet mds; // main data set (mds) private void Window_Loaded_1(object sender, RoutedEventArgs e) { try { string connectionString = Sqtm.Properties.Settings.Default.SqtmDbConnectionString; using (SqlConnection connection = new SqlConnection(connectionString)) { connection.Open(); //Merging tables General_Info and Quote_Data SqlCommand cmd = new SqlCommand("SELECT General_Info.Quote_ID, General_Info.Open_Quote, General_Info.Customer_Name," + "General_Info.OEM_Name, General_Info.Qty, General_Info.Quote_Num, General_Info.Fab_Drawing_Num, " + "General_Info.Rfq_Num, General_Info.Rev_Num, Quote_Data.MOA, Quote_Data.MOQ, " + "Quote_Data.Markup, Quote_Data.FOB, Quote_Data.Shipping_Method, Quote_Data.Freight, " + "Quote_Data.Vendor_Price, Unit_Price, Quote_Data.Difference, Quote_Data.Vendor_NRE_ET, " + "Quote_Data.NRE, Quote_Data.ET, Quote_Data.STI_NET, Quote_Data.Mfg_Time, Quote_Data.Delivery_Time, " + "Quote_Data.Mfg_Name, Quote_Data.Mfg_Location " + "FROM General_Info INNER JOIN dbo.Quote_Data ON General_Info.Quote_ID = Quote_Data.Quote_ID", connection); SqlDataAdapter da = new SqlDataAdapter(cmd); DataTable dt = new DataTable(); da.Fill(dt); MainGrid.ItemsSource = dt.DefaultView; mds = new DataSet(); da.Fill(mds, "General_Info"); MainGrid.DataContext = mds.Tables["General_Info"]; } } catch (Exception ex) { MessageBox.Show(ex.Message); } // renaming column names from the database so they are easier to read in the datagrid MainGrid.Columns[0].Header = "#"; MainGrid.Columns[1].Header = "Date"; MainGrid.Columns[2].Header = "Customer"; MainGrid.Columns[3].Header = "OEM"; MainGrid.Columns[4].Header = "Qty"; MainGrid.Columns[5].Header = "Quote Number"; MainGrid.Columns[6].Header = "Fab Drawing Num"; MainGrid.Columns[7].Header = "RFQ Number"; MainGrid.Columns[8].Header = "Rev Number"; MainGrid.Columns[9].Header = "MOA"; MainGrid.Columns[10].Header = "MOQ"; MainGrid.Columns[11].Header = "Markup"; MainGrid.Columns[12].Header = "FOB"; MainGrid.Columns[13].Header = "Shipping"; MainGrid.Columns[14].Header = "Freight"; MainGrid.Columns[15].Header = "Vendor Price"; MainGrid.Columns[16].Header = "Unit Price"; MainGrid.Columns[17].Header = "Difference"; MainGrid.Columns[18].Header = "Vendor NRE/ET"; MainGrid.Columns[19].Header = "NRE"; MainGrid.Columns[20].Header = "ET"; MainGrid.Columns[21].Header = "STINET"; MainGrid.Columns[22].Header = "Mfg. Time"; MainGrid.Columns[23].Header = "Delivery Time"; MainGrid.Columns[24].Header = "Manufacturer"; MainGrid.Columns[25].Header = "Mfg. Location"; } private void submitQuotebtn_Click(object sender, RoutedEventArgs e) { CustomerData newQuote = new CustomerData(); int quantity; quantity = Convert.ToInt32(quantityTxt.Text); string theDate = System.DateTime.Today.Date.ToString("d"); newQuote.OpenQuote = theDate; newQuote.CustomerName = customerNameTxt.Text; newQuote.OEMName = oemNameTxt.Text; newQuote.Qty = quantity; newQuote.QuoteNumber = quoteNumberTxt.Text; newQuote.FdNumber = fabDrawingNumberTxt.Text; newQuote.RfqNumber = rfqNumberTxt.Text; newQuote.RevNumber = revNumberTxt.Text; try { string insertConString = Sqtm.Properties.Settings.Default.SqtmDbConnectionString; using (SqlConnection insertConnection = new SqlConnection(insertConString)) { insertConnection.Open(); SqlDataAdapter adapter = new SqlDataAdapter(Sqtm.Properties.Settings.Default.SqtmDbConnectionString, insertConnection); SqlCommand updateCmd = new SqlCommand("UPDATE General_Info " + "Quote_ID = @Quote_ID, " + "Open_Quote = @Open_Quote, " + "OEM_Name = @OEM_Name, " + "Qty = @Qty, " + "Quote_Num = @Quote_Num, " + "Fab_Drawing_Num = @Fab_Drawing_Num, " + "Rfq_Num = @Rfq_Num, " + "Rev_Num = @Rev_Num " + "WHERE Quote_ID = @Quote_ID"); updateCmd.Connection = insertConnection; System.Data.SqlClient.SqlParameterCollection param = updateCmd.Parameters; // // Add new SqlParameters to the command. // param.AddWithValue("Open_Quote", newQuote.OpenQuote); param.AddWithValue("Customer_Name", newQuote.CustomerName); param.AddWithValue("OEM_Name", newQuote.OEMName); param.AddWithValue("Qty", newQuote.Qty); param.AddWithValue("Quote_Num", newQuote.QuoteNumber); param.AddWithValue("Fab_Drawing_Num", newQuote.FdNumber); param.AddWithValue("Rfq_Num", newQuote.RfqNumber); param.AddWithValue("Rev_Num", newQuote.RevNumber); adapter.UpdateCommand = updateCmd; adapter.Update(mds.Tables[0]); mds.AcceptChanges(); } } catch (Exception ex) { MessageBox.Show(ex.Message); } } Thanks in advance to anyone who can help, I really appreciate it, Andrew

  Read the article

• MVVM - implementing 'IsDirty' functionality to a ModelView in order to save data

  - by Brendan

  Hi, Being new to WPF & MVVM I struggling with some basic functionality. Let me first explain what I am after, and then attach some example code... I have a screen showing a list of users, and I display the details of the selected user on the right-hand side with editable textboxes. I then have a Save button which is DataBound, but I would only like this button to display when data has actually changed. ie - I need to check for "dirty data". I have a fully MVVM example in which I have a Model called User: namespace Test.Model { class User { public string UserName { get; set; } public string Surname { get; set; } public string Firstname { get; set; } } } Then, the ViewModel looks like this: using System.Collections.ObjectModel; using System.Collections.Specialized; using System.Windows.Input; using Test.Model; namespace Test.ViewModel { class UserViewModel : ViewModelBase { //Private variables private ObservableCollection<User> _users; RelayCommand _userSave; //Properties public ObservableCollection<User> User { get { if (_users == null) { _users = new ObservableCollection<User>(); //I assume I need this Handler, but I am stuggling to implement it successfully //_users.CollectionChanged += HandleChange; //Populate with users _users.Add(new User {UserName = "Bob", Firstname="Bob", Surname="Smith"}); _users.Add(new User {UserName = "Smob", Firstname="John", Surname="Davy"}); } return _users; } } //Not sure what to do with this?!?! //private void HandleChange(object sender, NotifyCollectionChangedEventArgs e) //{ // if (e.Action == NotifyCollectionChangedAction.Remove) // { // foreach (TestViewModel item in e.NewItems) // { // //Removed items // } // } // else if (e.Action == NotifyCollectionChangedAction.Add) // { // foreach (TestViewModel item in e.NewItems) // { // //Added items // } // } //} //Commands public ICommand UserSave { get { if (_userSave == null) { _userSave = new RelayCommand(param => this.UserSaveExecute(), param => this.UserSaveCanExecute); } return _userSave; } } void UserSaveExecute() { //Here I will call my DataAccess to actually save the data } bool UserSaveCanExecute { get { //This is where I would like to know whether the currently selected item has been edited and is thus "dirty" return false; } } //constructor public UserViewModel() { } } } The "RelayCommand" is just a simple wrapper class, as is the "ViewModelBase". (I'll attach the latter though just for clarity) using System; using System.ComponentModel; namespace Test.ViewModel { public abstract class ViewModelBase : INotifyPropertyChanged, IDisposable { protected ViewModelBase() { } public event PropertyChangedEventHandler PropertyChanged; protected virtual void OnPropertyChanged(string propertyName) { PropertyChangedEventHandler handler = this.PropertyChanged; if (handler != null) { var e = new PropertyChangedEventArgs(propertyName); handler(this, e); } } public void Dispose() { this.OnDispose(); } protected virtual void OnDispose() { } } } Finally - the XAML <Window x:Class="Test.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:vm="clr-namespace:Test.ViewModel" Title="MainWindow" Height="350" Width="525"> <Window.DataContext> <vm:UserViewModel/> </Window.DataContext> <Grid> <ListBox Height="238" HorizontalAlignment="Left" Margin="12,12,0,0" Name="listBox1" VerticalAlignment="Top" Width="197" ItemsSource="{Binding Path=User}" IsSynchronizedWithCurrentItem="True"> <ListBox.ItemTemplate> <DataTemplate> <StackPanel> <TextBlock Text="{Binding Path=Firstname}"/> <TextBlock Text="{Binding Path=Surname}"/> </StackPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox> <Label Content="Username" Height="28" HorizontalAlignment="Left" Margin="232,16,0,0" Name="label1" VerticalAlignment="Top" /> <TextBox Height="23" HorizontalAlignment="Left" Margin="323,21,0,0" Name="textBox1" VerticalAlignment="Top" Width="120" Text="{Binding Path=User/UserName}" /> <Label Content="Surname" Height="28" HorizontalAlignment="Left" Margin="232,50,0,0" Name="label2" VerticalAlignment="Top" /> <TextBox Height="23" HorizontalAlignment="Left" Margin="323,52,0,0" Name="textBox2" VerticalAlignment="Top" Width="120" Text="{Binding Path=User/Surname}" /> <Label Content="Firstname" Height="28" HorizontalAlignment="Left" Margin="232,84,0,0" Name="label3" VerticalAlignment="Top" /> <TextBox Height="23" HorizontalAlignment="Left" Margin="323,86,0,0" Name="textBox3" VerticalAlignment="Top" Width="120" Text="{Binding Path=User/Firstname}" /> <Button Content="Button" Height="23" HorizontalAlignment="Left" Margin="368,159,0,0" Name="button1" VerticalAlignment="Top" Width="75" Command="{Binding Path=UserSave}" /> </Grid> </Window> So basically, when I edit a surname, the Save button should be enabled; and if I undo my edit - well then it should be Disabled again as nothing has changed. I have seen this in many examples, but have not yet found out how to do it. Any help would be much appreciated! Brendan

  Read the article

• Repopulating a collection of Backbone forms with previously submitted data

  - by Brian Wheat

  I am able to post my forms to my database and I have stepped through my back end function to check and see that my Get function is returning the same data I submitted. However I am having trouble understanding how to have this data rendered upon visiting the page again. What am I missing? The intention is to be able to create, read, update, or delete (CRUD) some personal contact data for a variable collection of individuals. //Model var PersonItem = Backbone.Model.extend({ url: "/Application/PersonList", idAttribute: "PersonId", schema: { Title: { type: 'Select', options: function (callback) { $.getJSON("/Application/GetTitles/").done(callback); } }, Salutation: { type: 'Select', options: ['Mr.', 'Mrs.', 'Ms.', 'Dr.'] }, FirstName: 'Text', LastName: 'Text', MiddleName: 'Text', NameSuffix: 'Text', StreetAddress: 'Text', City: 'Text', State: { type: 'Select', options: function (callback) { $.getJSON("/Application/GetStates/").done(callback); } }, ZipCode: 'Text', PhoneNumber: 'Text', DateOfBirth: 'Date', } }); Backbone.Form.setTemplates(template, PersonItem); //Collection var PersonList = Backbone.Collection.extend({ model: PersonItem , url: "/Application/PersonList" }); //Views var PersonItemView = Backbone.Form.extend({ tagName: "li", events: { 'click button.delete': 'remove', 'change input': 'change' }, initialize: function (options) { console.log("ItemView init"); PersonItemView.__super__.initialize.call(this, options); _.bindAll(this, 'render', 'remove'); console.log("ItemView set attr = " + options); }, render: function () { PersonItemView.__super__.render.call(this); $('fieldset', this.el).append("<button class=\"delete\" style=\"float: right;\">Delete</button>"); return this; }, change: function (event) { var target = event.target; console.log('changing ' + target.id + ' from: ' + target.defaultValue + ' to: ' + target.value); }, remove: function () { console.log("delete button pressed"); this.model.destroy({ success: function () { alert('person deleted successfully'); } }); return false; } }); var PersonListView = Backbone.View.extend({ el: $("#application_fieldset"), events: { 'click button#add': 'addPerson', 'click button#save': 'save2db' }, initialize: function () { console.log("PersonListView Constructor"); _.bindAll(this, 'render', 'addPerson', 'appendItem', 'save'); this.collection = new PersonList(); this.collection.bind('add', this.appendItem); //this.collection.fetch(); this.collection.add([new PersonItem()]); console.log("collection length = " + this.collection.length); }, render: function () { var self = this; console.log(this.collection.models); $(this.el).append("<button id='add'>Add Person</button>"); $(this.el).append("<button id='save'>Save</button>"); $(this.el).append("<fieldset><legend>Contact</legend><ul id=\"anchor_list\"></ul>"); _(this.collection.models).each(function (item) { self.appendItem(item); }, this); $(this.el).append("</fieldset>"); }, addPerson: function () { console.log("addPerson clicked"); var item = new PersonItem(); this.collection.add(item); }, appendItem: function (item) { var itemView = new PersonItemView({ model: item }); $('#anchor_list', this.el).append(itemView.render().el); }, save2db: function () { var self = this; console.log("PersonListView save"); _(this.collection.models).each(function (item) { console.log("item = " + item.toJSON()); var cid = item.cid; console.log("item.set"); item.set({ Title: $('#' + cid + '_Title').val(), Salutation: $('#' + cid + '_Salutation').val(), FirstName: $('#' + cid + '_FirstName').val(), LastName: $('#' + cid + '_LastName').val(), MiddleName: $('#' + cid + '_MiddleName').val(), NameSuffix: $('#' + cid + '_NameSuffix').val(), StreetAddress: $('#' + cid + '_StreetAddress').val(), City: $('#' + cid + '_City').val(), State: $('#' + cid + '_State').val(), ZipCode: $('#' + cid + '_ZipCode').val(), PhoneNumber: $('#' + cid + '_PhoneNumber').val(), DateOfBirth: $('#' + cid + '_DateOfBirth').find('input').val() }); if (item.isNew()) { console.log("item.isNew"); self.collection.create(item); } else { console.log("!item.isNew"); item.save(); } }); return false; } }); var personList = new PersonList(); var view = new PersonListView({ collection: personList }); personList.fetch({ success: function () { $("#application_fieldset").append(view.render()); } });

  Read the article

• Security Access Control With Solaris Virtualization

  - by Thierry Manfe-Oracle

  Numerous Solaris customers consolidate multiple applications or servers on a single platform. The resulting configuration consists of many environments hosted on a single infrastructure and security constraints sometimes exist between these environments. Recently, a customer consolidated many virtual machines belonging to both their Intranet and Extranet on a pair of SPARC Solaris servers interconnected through Infiniband. Virtual Machines were mapped to Solaris Zones and one security constraint was to prevent SSH connections between the Intranet and the Extranet. This case study gives us the opportunity to understand how the Oracle Solaris Network Virtualization Technology —a.k.a. Project Crossbow— can be used to control outbound traffic from Solaris Zones. Solaris Zones from both the Intranet and Extranet use an Infiniband network to access a ZFS Storage Appliance that exports NFS shares. Solaris global zones on both SPARC servers mount iSCSI LU exported by the Storage Appliance.  Non-global zones are installed on these iSCSI LU. With no security hardening, if an Extranet zone gets compromised, the attacker could try to use the Storage Appliance as a gateway to the Intranet zones, or even worse, to the global zones as all the zones are reachable from this node. One solution consists in using Solaris Network Virtualization Technology to stop outbound SSH traffic from the Solaris Zones. The virtualized network stack provides per-network link flows. A flow classifies network traffic on a specific link. As an example, on the network link used by a Solaris Zone to connect to the Infiniband, a flow can be created for TCP traffic on port 22, thereby a flow for the ssh traffic. A bandwidth can be specified for that flow and, if set to zero, the traffic is blocked. Last but not least, flows are created from the global zone, which means that even with root privileges in a Solaris zone an attacker cannot disable or delete a flow. With the flow approach, the outbound traffic of a Solaris zone is controlled from outside the zone. Schema 1 describes the new network setting once the security has been put in place. Here are the instructions to create a Crossbow flow as used in Schema 1 : (GZ)# zoneadm -z zonename halt ...halts the Solaris Zone. (GZ)# flowadm add-flow -l iblink -a transport=TCP,remote_port=22 -p maxbw=0 sshFilter  ...creates a flow on the IB partition "iblink" used by the zone to connect to the Infiniband.  This IB partition can be identified by intersecting the output of the commands 'zonecfg -z zonename info net' and 'dladm show-part'.  The flow is created on port 22, for the TCP traffic with a zero maximum bandwidth.  The name given to the flow is "sshFilter". (GZ)# zoneadm -z zonename boot  ...restarts the Solaris zone now that the flow is in place.Solaris Zones and Solaris Network Virtualization enable SSH access control on Infiniband (and on Ethernet) without the extra cost of a firewall. With this approach, no change is required on the Infiniband switch. All the security enforcements are put in place at the Solaris level, minimizing the impact on the overall infrastructure. The Crossbow flows come in addition to many other security controls available with Oracle Solaris such as IPFilter and Role Based Access Control, and that can be used to tackle security challenges.

  Read the article

• Self-relation messes up contents in fetching

  - by holographix

  Hi folks, I'm dealing with an annoying problem in core data I've got a table named Character, which is made as follows I'm filling the table in various steps: 1) fill the attributes of the table 2) fill the Character Relation (charRel) FYI charRel is defined as follows I'm feeding the contents by pulling the data from an xml, the feeding code is this curStr = [[NSMutableString stringWithString:[curStr stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceAndNewlineCharacterSet]]] retain]; NSLog(@"Parsing relation within these keys %@, in order to get'em associated",curStr); NSArray *chunks = [curStr componentsSeparatedByString: @","]; for( NSString *relId in chunks ) { NSLog(@"Associating %@ with id %@",[currentCharacter valueForKey:@"character_id"], relId); NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSPredicate *predicate = [NSPredicate predicateWithFormat:@"character_id == %@", relId]; [request setEntity:[NSEntityDescription entityForName:@"Character" inManagedObjectContext:[self managedObjectContext] ]]; [request setPredicate:predicate]; NSerror *error = nil; NSArray *results = [[self managedObjectContext] executeFetchRequest:request error:&error]; // error handling code if(error != nil) { NSLog(@"[SYMBOL CORRELATION]: retrieving correlated symbol error: %@", [error localizedDescription]); } else if([results count] > 0) { Character *relatedChar = [results objectAtIndex:0]; // grab the first result in the stack, could be done better! [currentCharacter addCharRelObject:relatedChar]; //VICE VERSA RELATIONS NSArray *charRels = [relatedChar valueForKey:@"charRel"]; BOOL alreadyRelated = NO; for(Character *charRel in charRels) { if([[charRel valueForKey:@"character_id"] isEqual:[currentCharacter valueForKey:@"character_id"]]) { alreadyRelated = YES; break; } } if(!alreadyRelated) { NSLog(@"\n\t\trelating %@ with %@", [relatedChar valueForKey:@"character_id"], [currentCharacter valueForKey:@"character_id"]); [relatedChar addCharRelObject:currentCharacter]; } } else { NSLog(@"[SYMBOL CORRELATION]: related symbol was not found! ##SKIPPING-->"); } [request release]; } NSLog(@"\t\t### TOTAL OF REALTIONS FOR ID %@: %d\n%@", [currentCharacter valueForKey:@"character_id"], [[currentCharacter valueForKey:@"charRel"] count], currentCharacter); error = nil; /* SAVE THE CONTEXT */ if (![managedObjectContext save:&error]) { NSLog(@"Whoops, couldn't save the symbol record: %@", [error localizedDescription]); NSArray* detailedErrors = [[error userInfo] objectForKey:NSDetailedErrorsKey]; if(detailedErrors != nil && [detailedErrors count] > 0) { for(NSError* detailedError in detailedErrors) { NSLog(@"\n################\t\tDetailedError: %@\n################", [detailedError userInfo]); } } else { NSLog(@" %@", [error userInfo]); } } at this point when I print out the values of the currentCharacter, everything looks perfect. every relation is in its place. in example in this log we can clearly see that this element has got 3 items in charRel: <Character: 0x5593af0> (entity: Character; id: 0x55938c0 <x-coredata://67288D50-D349-4B19-B7CB-F7AC4671AD61/Character/p86> ; data: { catRel = "<relationship fault: 0x9a29db0 'catRel'>"; charRel = ( "0x9a1f870 <x-coredata://67288D50-D349-4B19-B7CB-F7AC4671AD61/Character/p74>", "0x9a14bd0 <x-coredata://67288D50-D349-4B19-B7CB-F7AC4671AD61/Character/p109>", "0x558ba00 <x-coredata://67288D50-D349-4B19-B7CB-F7AC4671AD61/Character/p5>" ); "character_id" = 254; examplesRel = "<relationship fault: 0x9a29df0 'examplesRel'>"; meaning = "\n Left"; pinyin = "\n zu\U01d2"; "pronunciation_it" = "\n zu\U01d2"; strokenumber = 5; text = "\n \n <p>The most ancient form of this symbol"; unicodevalue = "\n \U5de6"; }) then when I'm in need of retrieving this item I perform an extraction, like this: // at first I get the single Character record NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSError *error; NSPredicate *predicate = [NSPredicate predicateWithFormat:@"character_id == %@", self.char_id ]; [request setEntity:[NSEntityDescription entityForName:@"Character" inManagedObjectContext:_context ]]; [request setPredicate:predicate]; NSArray *fetchedObjs = [_context executeFetchRequest:request error:&error]; when, for instance, I print out in NSLog the contents of charRel NSArray *correlations = [singleCharacter valueForKey:@"charRel"]; NSLog(@"CHARACTER OBJECT \n%@", correlations); I get this Relationship fault for (<NSRelationshipDescription: 0x5568520>), name charRel, isOptional 1, isTransient 0, entity Character, renamingIdentifier charRel, validation predicates (), warnings (), versionHashModifier (null), destination entity Character, inverseRelationship (null), minCount 1, maxCount 99 on 0x6937f00 hope that I made myself clear. this thing is driving me insane, I've googled all over world, but I couldn't find a solution (and this make me think to as issue related to bad coding somehow :P). thank you in advance guys. k

  Read the article

• PHP: How to automate building a 100 <UL>/<LI> menuitems, while keeping the Menu Structure File Flat / Simply Managable?

  - by Sam

  Above: current "stupid" menu. (entire ul/li menu for javascript menu system) + (some li lines as page-specific submenu) Hi folks! With passion for automation and elegancy, but limited knowledge/knowhow, im stuck with "my hands in my hair" as we Dutch say, for my current menu system works perfectly, but is a pain in the a*s to update! So, i would appreciate it greatly, if you can suggest how to automate this in php: how to let the php generate the html menu code basing on a flat menu input file with TABS indented. OLD SITUATION <ul> <!-- about 100 of these <li>....</li> lines --> <li><a href="carrot.php"><p class="mnu" style="background-position:0 -820px"><? echo __("carrot juice") ?></p></a></li> <!-- lots of data, with only little bit thats really the menu itself--> </ul a javascript file reads a ul/li structure as input to build menu of format in that ul/li, the items with a hyperlink and sprite-bg position represent webpages, (inside LI) while items without hyperlink and sprite-bg are just headers of that menusection, (inside H6) to highlight the current page in the menu, the javascript menumaker uses an id number. this number corresponds to the consequtive li that is a webpage, skips h6 headers correctly. these h6 headers are only there for when importing sections of the same menu as submenu. non-li headers are not shown in menu, nore counted by the javascript menu for their ID. to know which page should be shown, i have to count from ID 0, the li items till finding the current webpage in the li structure and then manually put it in each webpage! BUT: changing an item in li order, means stupidly re-counting their entire li again! each webpage has an icon (= sprite bg-position numer), which is also used in the webpage. INTENDED RESULT I dream of, once setting what the current webpage is (e.g carrot.php) the menu system automatically "finds" and "counts" the li's and returns the id nr (for proper highlight of main menu); generates the entire menu html, and depending on which headings are set for submenu, (e.g. meals, drinks) generates those submenu (entire section below each given header); ginally adds h5 highlight inside the li of that submenu item. For the menu, i wish an easily readable, simple plain txt menu that is indented with tabs, (each tab is one depth for example) and further tabs follow for url and sprite position of icon. MY DREAM MENU-MANAGEMENT FILE |>TAB SEPARATED/INDENTED FLATMENU FILE |MUST BE CALCULATED BY PHP: |>MENUTEXT============URL=============SPRITE=====|ID===TAG================== |>about "#" -520 |00 li |> INFORMATION |—— h6 |> physical state "physical.php" -920 |01 li |> mental health "mental.php" -10 |02 li |> |>apetite "#" -1290 |03 li |> meals "#" -600 |04 li |> COLD MEAL |—— h6 |> egg salade "salad.php" -1040 |05 li |> salmon fish "salmon.php" -540 |06 li |> HOT MEAL |—— h6 |> spare ribs "spareribs.php" -120 |07 li |> di macaroni "macaroni.php" -870 |08 li |> |> drinks "#" -230 |09 li |> JUCY DRINK |—— h6 |> carrot juice "carrot.php" -820 |10 li |> mango hive "mango.php" -270 |11 li DESIRED CHRONOLOGY php outputs the entire ul/li html so the javascript can show the menu: webpage items go inside li tags, and header items go inside h6 tags, e.g. <h6>JUCY DRINK</h6> Each website page has a url filename [eg: salad.php]. Based on this given fact, the php menu generator detects the pagename, gives the IDnr of the position of that page according to the li-item nr and sets variable for javascript to highlight current menu item. the menu items below the specified headers are loaded as submenu in which the current page.php is wrapped inside h5 to highlight current page in submenu: e.g. (<li><h5><a href="carrot.php"><p>..etc..</p></h5></li> Question Which methods / steps / (chronological)ways are there for doing this? I am no good in php programming, but am learning it so please dont write any code without a line of comment why I should use that method etc. Where do I start? If I am unclear in my question, please ask. Thanks. Much appreciated!! Concrete Task List from the provided Comments/Answers, sofar: (RobertB) First, get some PHP code working that can read through a tab-delimited file and put the data into an appropriate data structure. NOW WORKING AT THIS

  Read the article

• Matplotlib plotting non uniform data in 3D surface

  - by Raj Tendulkar

  I have a simple code to plot the points in 3D for Matplotlib as below - from mpl_toolkits.mplot3d import axes3d import matplotlib.pyplot as plt import numpy as np from numpy import genfromtxt import csv fig = plt.figure() ax = fig.add_subplot(111, projection='3d') my_data = genfromtxt('points1.csv', delimiter=',') points1X = my_data[:,0] points1Y = my_data[:,1] points1Z = my_data[:,2] ## I remove the header of the CSV File. points1X = np.delete(points1X, 0) points1Y = np.delete(points1Y, 0) points1Z = np.delete(points1Z, 0) # Convert the array to 1D array points1X = np.reshape(points1X,points1X.size) points1Y = np.reshape(points1Y,points1Y.size) points1Z = np.reshape(points1Z,points1Z.size) my_data = genfromtxt('points2.csv', delimiter=',') points2X = my_data[:,0] points2Y = my_data[:,1] points2Z = my_data[:,2] ## I remove the header of the CSV File. points2X = np.delete(points2X, 0) points2Y = np.delete(points2Y, 0) points2Z = np.delete(points2Z, 0) # Convert the array to 1D array points2X = np.reshape(points2X,points2X.size) points2Y = np.reshape(points2Y,points2Y.size) points2Z = np.reshape(points2Z,points2Z.size) ax.plot(points1X, points1Y, points1Z, 'd', markersize=8, markerfacecolor='red', label='points1') ax.plot(points2X, points2Y, points2Z, 'd', markersize=8, markerfacecolor='blue', label='points2') plt.show() My problem is that I tried to make a decent surface plot out of these data points that I have. I already tried to use ax.plot_surface() function to make it look nice. For this I eliminated some points, and recalculated the matrix kind of input needed by this function. However, the graph I generated was far more difficult to interpret and understand. So there might be 2 possibilities: either I am not using the function correctly, or otherwise, the data I am trying to plot is not good for the surface plot. What I was expecting was 3D graph which would have an effect similar to that we have of 3D pie chart. We see that one piece (that which is extracted out) is part of another piece. I was not expecting it to be exactly same like that, but some kind of effect like that. What I would like to ask is: Do you think it will be possible to make such 3D graph? Is there any way better, I could express my data in 3 dimension? Here are the 2 files - points1.csv Dim1,Dim2,Dim3 3,8,1 3,8,2 3,8,3 3,8,4 3,8,5 3,9,1 3,9,2 3,9,3 3,9,4 3,9,5 3,10,1 3,10,2 3,10,3 3,10,4 3,10,5 3,11,1 3,11,2 3,11,3 3,11,4 3,11,5 3,12,1 3,12,2 3,13,1 3,13,2 3,14,1 3,14,2 3,15,1 3,15,2 3,16,1 3,16,2 3,17,1 3,17,2 3,18,1 3,18,2 4,8,1 4,8,2 4,8,3 4,8,4 4,8,5 4,9,1 4,9,2 4,9,3 4,9,4 4,9,5 4,10,1 4,10,2 4,10,3 4,10,4 4,10,5 4,11,1 4,11,2 4,11,3 4,11,4 4,11,5 4,12,1 4,13,1 4,14,1 4,15,1 4,16,1 4,17,1 4,18,1 5,8,1 5,8,2 5,8,3 5,8,4 5,8,5 5,9,1 5,9,2 5,9,3 5,9,4 5,9,5 5,10,1 5,10,2 5,10,3 5,10,4 5,10,5 5,11,1 5,11,2 5,11,3 5,11,4 5,11,5 5,12,1 5,13,1 5,14,1 5,15,1 5,16,1 5,17,1 5,18,1 6,8,1 6,8,2 6,8,3 6,8,4 6,8,5 6,9,1 6,9,2 6,9,3 6,9,4 6,9,5 6,10,1 6,11,1 6,12,1 6,13,1 6,14,1 6,15,1 6,16,1 6,17,1 6,18,1 7,8,1 7,8,2 7,8,3 7,8,4 7,8,5 7,9,1 7,9,2 7,9,3 7,9,4 7,9,5 and points2.csv Dim1,Dim2,Dim3 3,12,3 3,12,4 3,12,5 3,13,3 3,13,4 3,13,5 3,14,3 3,14,4 3,14,5 3,15,3 3,15,4 3,15,5 3,16,3 3,16,4 3,16,5 3,17,3 3,17,4 3,17,5 3,18,3 3,18,4 3,18,5 4,12,2 4,12,3 4,12,4 4,12,5 4,13,2 4,13,3 4,13,4 4,13,5 4,14,2 4,14,3 4,14,4 4,14,5 4,15,2 4,15,3 4,15,4 4,15,5 4,16,2 4,16,3 4,16,4 4,16,5 4,17,2 4,17,3 4,17,4 4,17,5 4,18,2 4,18,3 4,18,4 4,18,5 5,12,2 5,12,3 5,12,4 5,12,5 5,13,2 5,13,3 5,13,4 5,13,5 5,14,2 5,14,3 5,14,4 5,14,5 5,15,2 5,15,3 5,15,4 5,15,5 5,16,2 5,16,3 5,16,4 5,16,5 5,17,2 5,17,3 5,17,4 5,17,5 5,18,2 5,18,3 5,18,4 5,18,5 6,10,2 6,10,3 6,10,4 6,10,5 6,11,2 6,11,3 6,11,4 6,11,5 6,12,2 6,12,3 6,12,4 6,12,5 6,13,2 6,13,3 6,13,4 6,13,5 6,14,2 6,14,3 6,14,4 6,14,5 6,15,2 6,15,3 6,15,4 6,15,5 6,16,2 6,16,3 6,16,4 6,16,5 6,17,2 6,17,3 6,17,4 6,17,5 6,18,2 6,18,3 6,18,4 6,18,5 7,10,1 7,10,2 7,10,3 7,10,4 7,10,5 7,11,1 7,11,2 7,11,3 7,11,4 7,11,5 7,12,1 7,12,2 7,12,3 7,12,4 7,12,5 7,13,1 7,13,2 7,13,3 7,13,4 7,13,5 7,14,1 7,14,2 7,14,3 7,14,4 7,14,5 7,15,1 7,15,2 7,15,3 7,15,4 7,15,5 7,16,1 7,16,2 7,16,3 7,16,4 7,16,5 7,17,1 7,17,2 7,17,3 7,17,4 7,17,5 7,18,1 7,18,2 7,18,3 7,18,4 7,18,5

  Read the article

• ADO and Two Way Storage Tiering

  - by Andy-Oracle

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 We get asked the following question about Automatic Data Optimization (ADO) storage tiering quite a bit. Can you tier back to the original location if the data gets hot again? The answer is yes but not with standard Automatic Data Optimization policies, at least not reliably. That's not how ADO is meant to operate. ADO is meant to mirror a traditional view of Information Lifecycle Management (ILM) where data will be very volatile when first created, will become less active or cool, and then will eventually cease to be accessed at all (i.e. cold). I think the reason this question gets asked is because customers realize that many of their business processes are cyclical and the thinking goes that those segments that only get used during month end or year-end cycles could sit on lower cost storage when not being used. Unfortunately this doesn't fit very well with the ADO storage tiering model. ADO storage tiering is based on the amount of free and used space in the source tablespace. There are two parameters that control this behavior, TBS_PERCENT_USED and TBS_PERCENT_FREE. When the space in the tablespace exceeds the TBS_PERCENT_USED value then segments specified in storage tiering clause(s) can be moved until the percent of free space reaches the TBS_PERCENT_FREE value. It is worth mentioning that no checks are made for available space in the target tablespace. Now, it is certainly possible to create custom functions to control storage tiering, but this can get complicated. The biggest problem is insuring that there is enough space to move the segment back to tier 1 storage, assuming that that's the goal. This isn't as much of a problem when moving from tier 1 to tier 2 storage because there is typically more tier 2 storage available. At least that's the premise since it is supposed to be less costly, lower performing and higher capacity storage. In either case though, if there isn't enough space then the operation fails. In the case of a customized function, the question becomes do you attempt to free the space so the move can be made or do you just stop and return false so that the move cannot take place? This is really the crux of the issue. Once you cross into this territory you're really going to have to implement two-way hierarchical storage and the whole point of ADO was to provide automatic storage tiering. You're probably better off using heat map and/or business access requirements and building your own hierarchical storage management infrastructure if you really want two way storage tiering. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Custom Section Name Crashing NSFetchedResultsController

  - by Mike H.

  I have a managed object with a dueDate attribute. Instead of displaying using some ugly date string as the section headers of my UITableView I created a transient attribute called "category" and defined it like so: - (NSString*)category { [self willAccessValueForKey:@"category"]; NSString* categoryName; if ([self isOverdue]) { categoryName = @"Overdue"; } else if ([self.finishedDate != nil]) { categoryName = @"Done"; } else { categoryName = @"In Progress"; } [self didAccessValueForKey:@"category"]; return categoryName; } Here is the NSFetchedResultsController set up: NSFetchRequest *fetchRequest = [[NSFetchRequest alloc] init]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"Task" inManagedObjectContext:managedObjectContext]; [fetchRequest setEntity:entity]; NSMutableArray* descriptors = [[NSMutableArray alloc] init]; NSSortDescriptor *dueDateDescriptor = [[NSSortDescriptor alloc] initWithKey:@"dueDate" ascending:YES]; [descriptors addObject:dueDateDescriptor]; [dueDateDescriptor release]; [fetchRequest setSortDescriptors:descriptors]; fetchedResultsController = [[NSFetchedResultsController alloc] initWithFetchRequest:fetchRequest managedObjectContext:managedObjectContext sectionNameKeyPath:@"category" cacheName:@"Root"]; The table initially displays fine, showing the unfinished items whose dueDate has not passed in a section titled "In Progress". Now, the user can tap a row in the table view which pushes a new details view onto the navigation stack. In this new view the user can tap a button to indicate that the item is now "Done". Here is the handler for the button (self.task is the managed object): - (void)taskDoneButtonTapped { self.task.finishedDate = [NSDate date]; } As soon as the value of the "finishedDate" attribute changes I'm hit with this exception: 2010-03-18 23:29:52.476 MyApp[1637:207] Serious application error. Exception was caught during Core Data change processing: no section named 'Done' found with userInfo (null) 2010-03-18 23:29:52.477 MyApp[1637:207] *** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'no section named 'Done' found' I've managed to figure out that the UITableView that is currently hidden by the new details view is trying to update its rows and sections because the NSFetchedResultsController was notified that something changed in the data set. Here's my table update code (copied from either the Core Data Recipes sample or the CoreBooks sample -- I can't remember which): - (void)controllerWillChangeContent:(NSFetchedResultsController *)controller { [self.tableView beginUpdates]; } - (void)controller:(NSFetchedResultsController *)controller didChangeObject:(id)anObject atIndexPath:(NSIndexPath *)indexPath forChangeType:(NSFetchedResultsChangeType)type newIndexPath:(NSIndexPath *)newIndexPath { switch(type) { case NSFetchedResultsChangeInsert: [self.tableView insertRowsAtIndexPaths:[NSArray arrayWithObject:newIndexPath] withRowAnimation:UITableViewRowAnimationFade]; break; case NSFetchedResultsChangeDelete: [self.tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationFade]; break; case NSFetchedResultsChangeUpdate: [self configureCell:[self.tableView cellForRowAtIndexPath:indexPath] atIndexPath:indexPath]; break; case NSFetchedResultsChangeMove: [self.tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationFade]; // Reloading the section inserts a new row and ensures that titles are updated appropriately. [self.tableView reloadSections:[NSIndexSet indexSetWithIndex:newIndexPath.section] withRowAnimation:UITableViewRowAnimationFade]; break; } } - (void)controller:(NSFetchedResultsController *)controller didChangeSection:(id <NSFetchedResultsSectionInfo>)sectionInfo atIndex:(NSUInteger)sectionIndex forChangeType:(NSFetchedResultsChangeType)type { switch(type) { case NSFetchedResultsChangeInsert: [self.tableView insertSections:[NSIndexSet indexSetWithIndex:sectionIndex] withRowAnimation:UITableViewRowAnimationFade]; break; case NSFetchedResultsChangeDelete: [self.tableView deleteSections:[NSIndexSet indexSetWithIndex:sectionIndex] withRowAnimation:UITableViewRowAnimationFade]; break; } } - (void)controllerDidChangeContent:(NSFetchedResultsController *)controller { [self.tableView endUpdates]; } I put breakpoints in each of these functions and found that only controllerWillChange is called. The exception is thrown before either controller:didChangeObject:atIndexPath:forChangeType:newIndex or controller:didChangeSection:atIndex:forChangeType are called. At this point I'm stuck. If I change my sectionNameKeyPath to just "dueDate" then everything works fine. I think that's because the dueDate attribute never changes whereas the category will be different when read back after the finishedDate attribute changes. Please help! UPDATE: Here is my UITableViewDataSource code: - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { return [[self.fetchedResultsController sections] count]; } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { id <NSFetchedResultsSectionInfo> sectionInfo = [[self.fetchedResultsController sections] objectAtIndex:section]; return [sectionInfo numberOfObjects]; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [self.tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier] autorelease]; } [self configureCell:cell atIndexPath:indexPath]; return cell; } - (NSString *)tableView:(UITableView *)tableView titleForHeaderInSection:(NSInteger)section { id <NSFetchedResultsSectionInfo> sectionInfo = [[self.fetchedResultsController sections] objectAtIndex:section]; return [sectionInfo name]; }

  Read the article

• ??????????? - Java SE Embedded 8

  - by kshimizu-Oracle

  Java?OS??????1?????????????????????????????????3?????????????? HEAP: Java????????????????????????????????? NON-HEAP: NON-HEAP????JVM???????????????????Code Cache?Metaspace???2????????????? Code Cache: ????JIT??????????????????????????? Metaspace: HEAP??????????????????????????   JavaVM??????????: VM?????????????????? ??????????????? ????????????????????????????????????????????????????????????????????????? HEAP?Java Mission Control???????????????????? (????)? ????Java SE?????????????API????????????????????????????????????? Mission Control?????API?????????????????????????????????API??????????????? HEAP???????????? VM????????"-Xmx"???????????????? java.lang.Runtime.maxMemory(); ?????HEAP????????? ?????VM????????"-Xms"? ????????????? "-Xms"???????"-Xmx"?????????? java.lang.Runtime.totalMemory(); ???????????HEAP????????????? java.lang.Runtime.freeMemory(); ??NON-HEAP???????????? API??????????? Java Mission Control?????????? ????????????Java Mission Control??????????????????????? ????"NON_HEAP"?????????NON-HEAP?????? ???? HEAP????NON-HEAP?????????????? Java VM???????????????????????????????????????? ?????????????????????????????????? ????HEAP/NON-HEAP?????????????????????????? OS?????????????? Linux???????procfs?Java??????????????????? (VmHWM or VmRSS) ????? ????HEAP/NON-HEAP??????????????????????????? ?????????????????? ??????JVM?????????????????? ?????????????????JVM???????????????????? ???JVM?????? ????????????? Embedded??JVM?????????? ??Embedded???Oracle JVM??????CPU????????????????????????????????????????? ??????CPU??????????????????????????????????????? Minimal/Client/Server??JVM???????????????? ????JVM??????????????????? ??????Compact????????????????? ? 2 - 3?????? Concept Guide (http://docs.oracle.com/javase/8/embedded/embedded-concepts/basic-concepts.htm) ???????? ??JVM??????????? ????????????????????? -Xms: ??????????? ?????????? ?????????????????????????????????????????????????? -Xmx: ??????????? -XX:ReservedCodeCacheSize: Code Cache??????? ?) JIT??????????????Code Cache????????????0???????? -Xint: JIT??????????? ????????????? JIT?????????????????????? ????????????????? -Xss: ???????????????????? ????????????????????????? ????????????????????????????? -XX:CompileThreshold: JIT?????????????????????????????????? ?????????????????????? ????????? ?????????????????? Code Cache?????????? ?????????? ????????????????????? ????????????????????????? ??????????????????????? ?????????????????????

  Read the article

• Passing data between android ListActivities in Java

  - by Will Janes

  I am new to Android! I am having a problem getting this code to work... Basically I Go from one list activity to another and pass the text from a list item through the intent of the activity to the new list view, then retrieve that text in the new list activity and then preform a http request based on value of that list item. Log Cat 04-05 17:47:32.370: E/AndroidRuntime(30135): FATAL EXCEPTION: main 04-05 17:47:32.370: E/AndroidRuntime(30135): java.lang.ClassCastException:android.widget.LinearLayout 04-05 17:47:32.370: E/AndroidRuntime(30135): at com.thickcrustdesigns.ufood.CatogPage$1.onItemClick(CatogPage.java:66) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.widget.AdapterView.performItemClick(AdapterView.java:284) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.widget.ListView.performItemClick(ListView.java:3731) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.widget.AbsListView$PerformClick.run(AbsListView.java:1959) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.os.Handler.handleCallback(Handler.java:587) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.os.Handler.dispatchMessage(Handler.java:92) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.os.Looper.loop(Looper.java:130) 04-05 17:47:32.370: E/AndroidRuntime(30135): at android.app.ActivityThread.main(ActivityThread.java:3691) 04-05 17:47:32.370: E/AndroidRuntime(30135): at java.lang.reflect.Method.invokeNative(Native Method) 04-05 17:47:32.370: E/AndroidRuntime(30135): at java.lang.reflect.Method.invoke(Method.java:507) 04-05 17:47:32.370: E/AndroidRuntime(30135): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:907) 04-05 17:47:32.370: E/AndroidRuntime(30135): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:665) 04-05 17:47:32.370: E/AndroidRuntime(30135): at dalvik.system.NativeStart.main(Native Method) ListActivity 1 package com.thickcrustdesigns.ufood; import java.util.ArrayList; import org.apache.http.NameValuePair; import org.apache.http.message.BasicNameValuePair; import org.json.JSONException; import org.json.JSONObject; import android.app.ListActivity; import android.content.Intent; import android.os.Bundle; import android.view.View; import android.widget.AdapterView; import android.widget.AdapterView.OnItemClickListener; import android.widget.Button; import android.widget.ListView; import android.widget.TextView; public class CatogPage extends ListActivity { ListView listView1; Button btn_bk; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.definition_main); btn_bk = (Button) findViewById(R.id.btn_bk); listView1 = (ListView) findViewById(android.R.id.list); ArrayList<NameValuePair> nvp = new ArrayList<NameValuePair>(); nvp.add(new BasicNameValuePair("request", "categories")); ArrayList<JSONObject> jsondefs = Request.fetchData(this, nvp); String[] defs = new String[jsondefs.size()]; for (int i = 0; i < jsondefs.size(); i++) { try { defs[i] = jsondefs.get(i).getString("Name"); } catch (JSONException e) { // TODO Auto-generated catch block e.printStackTrace(); } } uFoodAdapter adapter = new uFoodAdapter(this, R.layout.definition_list, defs); listView1.setAdapter(adapter); ListView lv = getListView(); lv.setOnItemClickListener(new OnItemClickListener() { @Override public void onItemClick(AdapterView<?> parent, View view, int position, long id) { TextView tv = (TextView) view; String p = tv.getText().toString(); Intent i = new Intent(getApplicationContext(), Results.class); i.putExtra("category", p); startActivity(i); } }); btn_bk.setOnClickListener(new View.OnClickListener() { public void onClick(View arg0) { Intent i = new Intent(getApplicationContext(), UFoodAppActivity.class); startActivity(i); } }); } } **ListActivity 2** package com.thickcrustdesigns.ufood; import java.util.ArrayList; import org.apache.http.NameValuePair; import org.apache.http.message.BasicNameValuePair; import org.json.JSONException; import org.json.JSONObject; import android.app.ListActivity; import android.os.Bundle; import android.widget.ListView; public class Results extends ListActivity { ListView listView1; enum Category { Chicken, Beef, Chinese, Cocktails, Curry, Deserts, Fish, ForOne { public String toString() { return "For One"; } }, Lamb, LightBites { public String toString() { return "Light Bites"; } }, Pasta, Pork, Vegetarian } @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); this.setContentView(R.layout.definition_main); listView1 = (ListView) findViewById(android.R.id.list); Bundle data = getIntent().getExtras(); String category = data.getString("category"); Category cat = Category.valueOf(category); String value = null; switch (cat) { case Chicken: value = "Chicken"; break; case Beef: value = "Beef"; break; case Chinese: value = "Chinese"; break; case Cocktails: value = "Cocktails"; break; case Curry: value = "Curry"; break; case Deserts: value = "Deserts"; break; case Fish: value = "Fish"; break; case ForOne: value = "ForOne"; break; case Lamb: value = "Lamb"; break; case LightBites: value = "LightBites"; break; case Pasta: value = "Pasta"; break; case Pork: value = "Pork"; break; case Vegetarian: value = "Vegetarian"; } ArrayList<NameValuePair> nvp = new ArrayList<NameValuePair>(); nvp.add(new BasicNameValuePair("request", "category")); nvp.add(new BasicNameValuePair("cat", value)); ArrayList<JSONObject> jsondefs = Request.fetchData(this, nvp); String[] defs = new String[jsondefs.size()]; for (int i = 0; i < jsondefs.size(); i++) { try { defs[i] = jsondefs.get(i).getString("Name"); } catch (JSONException e) { // TODO Auto-generated catch block e.printStackTrace(); } } uFoodAdapter adapter = new uFoodAdapter(this, R.layout.definition_list, defs); listView1.setAdapter(adapter); } } Request package com.thickcrustdesigns.ufood; import java.io.BufferedReader; import java.io.InputStream; import java.io.InputStreamReader; import java.util.ArrayList; import org.apache.http.HttpEntity; import org.apache.http.HttpResponse; import org.apache.http.NameValuePair; import org.apache.http.client.HttpClient; import org.apache.http.client.entity.UrlEncodedFormEntity; import org.apache.http.client.methods.HttpPost; import org.apache.http.impl.client.DefaultHttpClient; import org.json.JSONArray; import org.json.JSONObject; import android.content.Context; import android.util.Log; import android.widget.Toast; public class Request { @SuppressWarnings("null") public static ArrayList<JSONObject> fetchData(Context context, ArrayList<NameValuePair> nvp) { ArrayList<JSONObject> listItems = new ArrayList<JSONObject>(); InputStream is = null; try { HttpClient httpclient = new DefaultHttpClient(); HttpPost httppost = new HttpPost( "http://co350-11d.projects02.glos.ac.uk/php/database.php"); httppost.setEntity(new UrlEncodedFormEntity(nvp)); HttpResponse response = httpclient.execute(httppost); HttpEntity entity = response.getEntity(); is = entity.getContent(); } catch (Exception e) { Log.e("log_tag", "Error in http connection" + e.toString()); } // convert response to string String result = ""; try { BufferedReader reader = new BufferedReader(new InputStreamReader( is, "iso-8859-1"), 8); InputStream stream = null; StringBuilder sb = null; while ((result = reader.readLine()) != null) { sb.append(result + "\n"); } stream.close(); result = sb.toString(); } catch (Exception e) { Log.e("log_tag", "Error converting result " + e.toString()); } try { JSONArray jArray = new JSONArray(result); for (int i = 0; i < jArray.length(); i++) { JSONObject jo = jArray.getJSONObject(i); listItems.add(jo); } } catch (Exception e) { Toast.makeText(context.getApplicationContext(), "None Found!", Toast.LENGTH_LONG).show(); } return listItems; } } Any help would be grateful! Many Thanks EDIT Sorry very tired so missed out my 2nd ListActivity package com.thickcrustdesigns.ufood; import java.util.ArrayList; import org.apache.http.NameValuePair; import org.apache.http.message.BasicNameValuePair; import org.json.JSONException; import org.json.JSONObject; import android.app.ListActivity; import android.os.Bundle; import android.widget.ListView; public class Results extends ListActivity { ListView listView1; enum Category { Chicken, Beef, Chinese, Cocktails, Curry, Deserts, Fish, ForOne { public String toString() { return "For One"; } }, Lamb, LightBites { public String toString() { return "Light Bites"; } }, Pasta, Pork, Vegetarian } @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); this.setContentView(R.layout.definition_main); listView1 = (ListView) findViewById(android.R.id.list); Bundle data = getIntent().getExtras(); String category = data.getString("category"); Category cat = Category.valueOf(category); String value = null; switch (cat) { case Chicken: value = "Chicken"; break; case Beef: value = "Beef"; break; case Chinese: value = "Chinese"; break; case Cocktails: value = "Cocktails"; break; case Curry: value = "Curry"; break; case Deserts: value = "Deserts"; break; case Fish: value = "Fish"; break; case ForOne: value = "ForOne"; break; case Lamb: value = "Lamb"; break; case LightBites: value = "LightBites"; break; case Pasta: value = "Pasta"; break; case Pork: value = "Pork"; break; case Vegetarian: value = "Vegetarian"; } ArrayList<NameValuePair> nvp = new ArrayList<NameValuePair>(); nvp.add(new BasicNameValuePair("request", "category")); nvp.add(new BasicNameValuePair("cat", value)); ArrayList<JSONObject> jsondefs = Request.fetchData(this, nvp); String[] defs = new String[jsondefs.size()]; for (int i = 0; i < jsondefs.size(); i++) { try { defs[i] = jsondefs.get(i).getString("Name"); } catch (JSONException e) { // TODO Auto-generated catch block e.printStackTrace(); } } uFoodAdapter adapter = new uFoodAdapter(this, R.layout.definition_list, defs); listView1.setAdapter(adapter); } } Sorry again! Cheers guys!

  Read the article

• SQL Server Editions and Integration Services

  The SQL Server 2005 and SQL Server 2008 product family has quite a few editions now, so what does this mean for SQL Server Integration Services? Starting from the bottom we have the free edition known as Express, and the entry level Workgroup edition, as well as the new Web edition. None of these three include the full SSIS product, but they do all include the SQL Server Import and Export Wizard, with access to basic data sources but nothing more, so for simple loading and extraction of data this should suffice. You will not be able to build packages though, this is just a one shot deal aimed at using the wizard on an ad-hoc basis. To get the full power of Integration Services you need to start with Standard edition. This includes the BI Development Studio, for building your own packages, and fully functional IDE integrated into Visual Studio. (You get the full VS 2005/2008 IDE with the product). All core functions will be available but with a restricted set of transformations and tasks. The SQL Server 2005 Features Comparison or Features Supported by the Editions of SQL Server 2008 describes standard edition as having basic transforms, compared to Enterprise which includes the advanced transforms. I think basic is a little harsh considering the power you get with Standard, but the advanced covers the truly ground-breaking capabilities of data mining, text mining and cleansing or fuzzy transforms. The power of performing these operations within your ETL pipeline should not be underestimated, but not all processes will require these capabilities, so it seems like a reasonable delineation. Thankfully there are no feature limitations or artificial governors within Standard compared to Enterprise. The same control flow and data flow engines underpin both editions, with the same configuration and deployment options allowing you to work seamlessly between environments and editions if using the common components. In fact there are no govenors at all in SSIS, so whilst the SQL Database engine is limited to 4 CPUs in Standard edition, SSIS is only limited by the base operating system. The advanced transforms only available with Enterprise edition: Data Mining Training Destination Data Mining Query Component Fuzzy Grouping Fuzzy Lookup Term Extraction Term Lookup Dimension Processing Destination Partition Processing Destination The advanced tasks only available with Enterprise edition: Data Mining Query Task So in summary, if you want SQL Server Integration Services, you need SQL Server Standard edition, and for the more advanced tasks and transforms you need SQL Server Enterprise edition. To recap, the answer to the often asked question is no, SQL Server Integration Services is not available in SQL Server Express or Workgroup editions.

  Read the article

< Previous Page | 604 605 606 607 608 609 610 611 612 613 614 615  | Next Page >