Search Results

Search found 24043 results on 962 pages for 'private methods'.

Page 609/962 | < Previous Page | 605 606 607 608 609 610 611 612 613 614 615 616  | Next Page >

  • Shrink NTFS Windows 7 Partition with GParted

    - by user15961
    I am running a dual-boot system with Windows 7 and Ubuntu 10.10. Initially I allocated about 20GB for my Ubuntu partition; however, I quickly ran out of that space and am now looking to expand my partition. Currently my NTFS partition (450GB) has about 130GB of free space. I tried using GParted to shrink the partition but encountered the following error. I booted into windows so I could run chkdsk but the countdown freezes at 1 upon reboot. I tried multiple methods to resolve that issue but nothing seems to work. Finally I gave up, and now I just want to know what is the best way for me to force GParted to shrink the partition regardless of the errors. I don't really have anything important and I don't mind risking the data. I just don't want to wipe the entire NTFS partition because I don't have a Windows install CD and might require Windows later on for some programs. I tried using sudo ntfsresize but that spews out the same error as GParted... Any ideas? Check and repair file system (ntfs) on /dev/sda2 00:00:09 ( ERROR ) calibrate /dev/sda2 00:00:00 ( SUCCESS ) path: /dev/sda2 start: 36944325 end: 976771119 size: 939826795 (448.14 GiB) check file system on /dev/sda2 for errors and (if possible) fix them 00:00:09 ( ERROR ) ntfsresize -P -i -f -v /dev/sda2 ntfsresize v2.0.0 (libntfs 10:0:0) Device name : /dev/sda2 NTFS volume version: 3.1 Cluster size : 4096 bytes Current volume size: 481191318016 bytes (481192 MB) Current device size: 481191319040 bytes (481192 MB) Checking for bad sectors ... Checking filesystem consistency ... Cluster 63468 is referenced multiple times! Cluster 63469 is referenced multiple times! Cluster 63465 is referenced multiple times! Cluster 63466 is referenced multiple times! Cluster 63467 is referenced multiple times! Cluster 165621 is referenced multiple times! Cluster 165622 is referenced multiple times! Cluster 165623 is referenced multiple times! Cluster 165624 is referenced multiple times! ERROR: Filesystem check failed! ERROR: 9 clusters are referenced multiply times. NTFS is inconsistent. Run chkdsk /f on Windows then reboot it TWICE! The usage of the /f parameter is very IMPORTANT! No modification was and will be made to NTFS by this software until it gets repaired.

    Read the article

  • Redmine VirtualHost config not working with Document Root

    - by David Kaczynski
    I am trying to have requests for https://redmine.example.com access my redmine instance, but I am just getting an "Index of /" page with the contents of /var/www/redmine (which is a symbolic link to /usr/share/redmine/public). My VirtualHost config: <VirtualHost *:443> ServerName redmine.example.com DocumentRoot /var/www/redmine SSLEngine on SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key BrowserMatch "MSIE [2-6]" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown </VirtualHost> My /etc/apache2/sites-enables/redmine: RailsBaseURI /redmine How do I get the requests for https://redmine.example.com to correctly launch my redmine instance?

    Read the article

  • SHH Tunnel for Remote Desktop via Intermediary Server

    - by Mihai Todor
    I've seen many examples of SSH tunnels on the nets, but I'm still having no luck with this. Here's the setup: Windows 7 PC in a private network, sitting behind a firewall, with PowerShellInsider SSH server set up and working fine. Public access Linux server, which has access to the PC. Windows 7 laptop, at home, from which I wish to do remote desktop on the PC. Now, here's what I've tried so far: SSH tunnel from my laptop to the Linux server: ssh -f my_user@LINUX_SERVER -L 6666:LINUX_SERVER_IP:6666 -N SSH to the Linux server where I've set up a tunnel to the PC: ssh -f 'PRIVATE_DOMAIN\my_user'@PC_NAME -L 6666:PC_IP:3389 -N Unfortunately, I must be doing something wrong, because it doesn't seem to work. Any ideas why or, at least, any suggestions on how can I try to debug this setup? At the moment, I have access to all 3 machines (non-root on Linux), so I can test whatever I want...

    Read the article

  • Download Google+ Android App

    - by Gopinath
    You can access Google’s new social networking service,Google+, on your Android mobile phones using a native application. Google+ for mobile makes sharing the right things with the right people a lot simpler. Huddle lets you send super-fast messages to the people you care about most. With your permission, Instant Upload automatically puts the photos and videos you take into a private album in the cloud, so you can share them anytime, from anywhere. And no matter where you are, the stream lets you stay in the loop about what your friends are sharing and where they’re checking in. Here is a demonstration video of Google+ for Android. Google will release a native app for iPhone soon and there is no word on when they are going to release Google+ for other mobiles like Windows Phone 7, BlackBerry and Nokia. By the way you need invitation to access Google+ and you can request for one over here (more information on how to get Google+ Invite) Download Google+ for Android from Market Place This article titled,Download Google+ Android App, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • best way to "introduce" OOP/OOD to team of experienced C++ engineers

    - by DXM
    I am looking for an efficient way, that also doesn't come off as an insult, to introduce OOP concepts to existing team members? My teammates are not new to OO languages. We've been doing C++/C# for a long time so technology itself is familiar. However, I look around and without major infusion of effort (mostly in the form of code reviews), it seems what we are producing is C code that happens to be inside classes. There's almost no use of single responsibility principle, abstractions or attempts to minimize coupling, just to name a few. I've seen classes that don't have a constructor but get memset to 0 every time they are instantiated. But every time I bring up OOP, everyone always nods and makes it seem like they know exactly what I'm talking about. Knowing the concepts is good, but we (some more than others) seem to have very hard time applying them when it comes to delivering actual work. Code reviews have been very helpful but the problem with code reviews is that they only occur after the fact so to some it seems we end up rewriting (it's mostly refactoring, but still takes lots of time) code that was just written. Also code reviews only give feedback to an individual engineer, not the entire team. I am toying with the idea of doing a presentation (or a series) and try to bring up OOP again along with some examples of existing code that could've been written better and could be refactored. I could use some really old projects that no one owns anymore so at least that part shouldn't be a sensitive issue. However, will this work? As I said most people have done C++ for a long time so my guess is that a) they'll sit there thinking why I'm telling them stuff they already know or b) they might actually take it as an insult because I'm telling them they don't know how to do the job they've been doing for years if not decades. Is there another approach which would reach broader audience than a code review would, but at the same time wouldn't feel like a punishment lecture? I'm not a fresh kid out of college who has utopian ideals of perfectly designed code and I don't expect that from anyone. The reason I'm writing this is because I just did a review of a person who actually had decent high-level design on paper. However if you picture classes: A - B - C - D, in the code B, C and D all implement almost the same public interface and B/C have one liner functions so that top-most class A is doing absolutely all the work (down to memory management, string parsing, setup negotiations...) primarily in 4 mongo methods and, for all intents and purposes, calls almost directly into D. Update: I'm a tech lead(6 months in this role) and do have full support of the group manager. We are working on a very mature product and maintenance costs are definitely letting themselves be known.

    Read the article

  • The Case of the Missing Date/Time Stamp: Reporting Services 2008 R2 Snapshots

    - by smisner
    This week I stumbled upon an undocumented “feature” in SQL Server 2008 R2 Reporting Services as I was preparing a demonstration on how to set up and use report snapshots. If you’re familiar with the main changes in this latest release of Reporting Services, you probably already know that Report Manager got a facelift this time around. Although this facelift was generally a good thing, one of the casualties – in my opinion – is the loss of the snapshot label that served two purposes… First, it flagged the report as a snapshot. Second, it let you know when that snapshot was created. As part of my standard operating procedure when demonstrating report snapshots, I point out this label, so I was rather taken aback when I didn’t see it in the demonstration I was preparing. It sort of upset my routine, and I’m rather partial to my routines. I thought perhaps I wasn’t looking in the right place and changed Report Manager from Tile View to Detail View, but no – that label was still missing. In the grand scheme of life, it’s not an earth-shattering change, but you’ll have to look at the Modified Date in Details View to know when the snapshot was run. Or hope that the report developer included a textbox to show the execution time in the report. (Hint: this is a good time to add this to your list of report development best practices, whether a report gets set up as a report snapshot or not!) A snapshot from the past In case you don’t remember how a snapshot appeared in Report Manager back in the old days (of SQL Server 2008 and earlier), here’s an image I snagged from my Reporting Services 2008 Step by Step manuscript: A snapshot in the present A report server running in SharePoint integrated mode had no such label. There you had to rely on the Report Modified date-time stamp to know the snapshot execution time. So I guess all platforms are now consistent. Here’s a screenshot of Report Manager in the 2008 R2 version. One of these is a snapshot and the rest execute on demand. Can you tell which is the snapshot? Consider descriptions as an alternative So my report snapshot demonstration has one less step, and I’ll need to edit the Denali version of the Step by Step book. Things are simpler this way, but I sure wish we had an easier way to identify the execution methods of the reports. Consider using the description field to alert users that the report is a snapshot. It might save you a few questions about why the data isn’t up-to-date if the users know that something changed in the source of the report. Notice that the full description doesn’t display in Tile View, so keep it short and sweet or instruct users to open Details View to see the entire description.

    Read the article

  • Public DNS Server fails on Windows Amazon EC2

    - by Adroidist
    I have started a new Windows server instance on Amazon EC2. The security group has the following rules: Ports Protocol Source 22 tcp 0.0.0.0/0 80 tcp 0.0.0.0/0 443 tcp 0.0.0.0/0 3389 tcp 0.0.0.0/0 53 udp 0.0.0.0/0 -1 icmp 0.0.0.0/0 I am able to ping the public DNS server of the machine and i can connect to it using Windows Remote Desktop connection. However, when i put in my web browser the public DNS server, it fails to connect. Morever, I used filezilla and putty (and in both I loaded the private key .pem) but i receive connection timed out. I disabled the firewall on both my pc and the instance (which I entered using Remote desktop connection). Can you please tell me what I am missing?

    Read the article

  • Oracle Enterprise Manager 12c R3 introduces advancements in cloud lifecycle and operations management

    - by Anand Akela
    Oracle Enterprise Manager 12c Release 3 (R3) was announced ( Press Release ) earlier today. It is now available for download at  OTN . This latest release features improvements in several areas, including: Improvements to Private Cloud and Engineered Systems Management Expanded Middleware and Application Management Capabilities Efficiency Gains for Enterprise manager Users in EM’s Enterprise-Ready Framework You can learn more about what's new in the Oracle Enterprise Manager 12c R3 in the Enterprise Manager 12c documentation . You will see more blogs and details about the new features during the next few weeks. Please let us what On July 18th, you can join us at a webcast to hear Thomas Kurian, EVP of Product Development on what Oracle Engineering has achieved with Oracle Enterprise Manager 12c Release 3 to address these challenges. Later, during this webcast, Oracle experts will discuss the latest capabilities in Oracle Enterprise Manager 12c Release 3 for cloud lifecycle and operations management. The presentation will be followed by a live Q&A session with Oracle experts. You can also join us online on Twitter to get your specific questions answered. Please use hash tag #em12c to join the conversation. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Register Now for the Webcast! Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

    Read the article

  • Amazon CloudFormations and Oracle Virtual Assembly Builder

    - by llaszews
    Yesterday I blogged about AWS AMIs and Oracle VM templates. These are great mechanisms to stand up an initial cloud environment. However, they don't provide the capability to manage, provision and update an environment once it is up and running. This is where AWS Cloud Formations and Oracle Virtual Assembly Builder comes into play. In a way, these tools/frameworks pick up where AMIs and VM templates leave off. Once again, there a similar offers from AWS and Oracle that compliant and also overlap with each other. Let's start by looking at the definitions: AWS CloudFormation gives developers and systems administrators an easy way to create and manage a collection of related AWS resources, provisioning and updating them in an orderly and predictable fashion. AWS CloudFormations Oracle Virtual Assembly Builder - Oracle Virtual Assembly Builder makes it possible for administrators to quickly configure and provision entire multi-tier enterprise applications onto virtualized and cloud environments. Oracle VM Builder As with the discussion around should you use AMI or VM Templates, there are pros and cons to each: 1. CloudFormation is JSON, Assembly Builder is GUI and CLI 2. VM Templates can be used in any private or public cloud environment. Of course, CloudFormations is tied to AWS public cloud

    Read the article

  • Apache2 SSL And Passenger Configuration Issue

    - by Aditya Manohar
    I have the following virtual hosts configuration blocks. <VirtualHost *:80> DocumentRoot /var/www/html/TestApp/public/ <Directory /var/www/html/TestApp/public/> Allow from all Options -MultiViews </Directory> </VirtualHost> NameVirtualHost *:443 <VirtualHost *:443> DocumentRoot /var/www/html/TestApp/public/ <Directory /var/www/html/TestApp/public/> Allow from all Options -MultiViews </Directory> SSLEngine on SSLCertificateFile /etc/pki/tls/certs/server.crt SSLCertificateKeyFile /etc/pki/tls/private/server.key </VirtualHost> I trying to serve a Rails App off Passenger on Apache. The Problem: The TestApp works fine with Apache and Passenger when not using SSL When I use https://, I see the contents of /var/www/html The path to TestApp is /var/www/html/TestApp Any help will be much appreciated.

    Read the article

  • How can I restrict SSH access when the source IP is dynamic

    - by Supratik
    Hi I want to protect SSH access to our live web server from all IP's except our office static IP. There are some employees who connects to this live server from their dynamic IP's. So, it is not always possible for me to change in the iptables rule in live server whenever the dynamic IP of the employee changes. I tried to put them in office VPN and allowed only SSH access from office IP but the office connection is slow in compared to our employee's private internet connection, moreover it adds an extra overhead to our office network. Is there any way I can solve this problem ?

    Read the article

  • Teaching OO to VBA developers [closed]

    - by Eugene
    I work with several developers that come from less object oriented background like (VB6, VBA) and are mostly self-taught. As part of moving away from those technologies we recently we started having weekly workshops to go over the features of C#.NET and OO practices and design principles. After a couple of weeks of basic introduction I noticed that they had a lot of problems implementing even basic code. For instance it took probably 15 minutes to implement a Stack.push() and a full hour to implement a simple Stack fully. These developers were trying to do things like passing top index as a parameter to the method, not creating an private array, using variables out of scope. But most of all not going through the "design (dia/mono)log" (I need something to do X, so maybe I'll make an array, or put it here). I am a little confused because they are smart people and are able to produce functional code in their traditional environments. I'm curious if anybody else has encountered a similar thing and if there are any particular resources, exercises, books, ideas that would be helpful in this circumstance.

    Read the article

  • Oracle Solaris Remote Lab (OSRL) Fact Sheet

    - by user13333379
    The Oracle Solaris Remote Lab allows independent software vendors (ISVs) to test and qualify their applications in a self service Solaris cloud. ISVs who are Oracle Partner Network Gold members with a specialization in the Solaris knowledge zone can apply for free access in OPN. The lab offers the following features to it's users: Lifetime of project: 45 days (extensions granted on demand)  Up to 5 virtual machines in a private network  Virtual Machine technology: Solaris zones  Resources per VM processor support: SPARC or x86  OS version: OracleSolaris 11.0 4GB physical memory  4GB swap space  10GB local filesystem storage  10GB network filesystem (NFS) mounted on all virtual machines Networking configuration The only external network routes are to Partner's other Virtual Machines  No network routing to the Internet  The SMB (CIFS) sharing protocol is not available between Virtual Machines  Device Access  Applications that assume the existence of /devices will not run in a Virtual Machine  Applications that use eeprom to modify SPARC eeprom setting will not run in a Virtual Machine The following utilities do not work properly in Virtual Machines:  add_drv, disks, prtconf, prtdiag, rem_dev Access technology: Secure Global Desktop, file up and download root access within VM Available VM templates (both processor architectures) Oracle Database 11g Release 2 (11.2.0.3) for Solaris with Oracle Enterprise Manager 11g Weblogic 12c  SAMP: Apache http server, PHP, MySQL, phpadmin on all templates and images: Oracle Solaris Studio 12.3 for application development  More resources: Online application for Oracle Solaris remote Lab Developer Webinar about the Oracle Solaris Remote Lab Everything an Oracle Solaris Developer needs...

    Read the article

  • Oracle Solaris Remote Lab (OSRL) Fact Sheet

    - by user13333379
    The Oracle Solaris Remote Lab allows independent software vendors (ISVs) to test and qualify their applications in a self service Solaris cloud. ISVs who are Oracle Partner Network Gold members with a specialization in the Solaris knowledge zone can apply for free access in OPN. The lab offers the following features to it's users: Lifetime of project: 45 days (extensions granted on demand)  Up to 5 virtual machines in a private network  Virtual Machine technology: Solaris zones  Resources per VM processor support: SPARC or x86  OS version: OracleSolaris 11.0 4GB physical memory  4GB swap space  10GB local filesystem storage  10GB network filesystem (NFS) mounted on all virtual machines Networking configuration The only external network routes are to Partner's other Virtual Machines  No network routing to the Internet  The SMB (CIFS) sharing protocol is not available between Virtual Machines  Device Access  Applications that assume the existence of /devices will not run in a Virtual Machine  Applications that use eeprom to modify SPARC eeprom setting will not run in a Virtual Machine The following utilities do not work properly in Virtual Machines:  add_drv, disks, prtconf, prtdiag, rem_dev Access technology: Secure Global Desktop, file up and download root access within VM Available VM templates (both processor architectures) Oracle Database 11g Release 2 (11.2.0.3) for Solaris with Oracle Enterprise Manager 11g Weblogic 12c  SAMP: Apache http server, PHP, MySQL, phpadmin on all templates and images: Oracle Solaris Studio 12.3 for application development  More resources: Online application for Oracle Solaris remote Lab Developer Webinar about the Oracle Solaris Remote Lab Everything an Oracle Solaris Developer needs...

    Read the article

  • Can an internally developed fast evolving, agile, short sprint web application lend itself to offshoring?

    - by Gavin Howden
    I have recently been set a target to achieve readiness to successfully manage and deliver results through the usage of offshore teams on our mainline development project within 12 months. Our mainline is a multi-thousand user highly available web application, and various related SAAS components delivered through the above mentioned web application. We work agile on the mainline with a rapid 1 week sprint using continuous integration. Our delivery platform is a bespoke php framework, although we have some .net services and components in the mix. My view is: an offshore team could work if we either ship out an entire isolated project for offshore development, or we specify a component for our system in huge detail up front. But we don't currently work like that, and it will conflict with the in-house method, and unless the off-shore is working within our team, with our development/deployment chain it could be an integration nightmare. So my question is, given we have a closed source bespoke framework (Private IP) which we train our developers to use, and we work agile minimising documentation, maximising communication and responding to rapidly changing requirements, and much of the quality control is via team skills building and peer review, how can I make off-shoring work on our main line development?

    Read the article

  • ACL and moving files in Nautilus

    - by MyOnlyEye
    When I move files from a private home directory (e.g. /home/jack) to a shared directory (e.g. /home/shared-school) Nautilus copies the file permissions from the original file into the shared directory - and ignores the ACL that I've put in the /home/shared-school directory (e.g. setfacl -R -m d:g:school:rwx /home/shared-school). Is it possible to force Nautilus to change ACL on a file that is moved or copied - or not to ignore the ACL on the directory where the files are moved or copied?

    Read the article

  • Implicit OAuth2 endpoint vs. cookies

    - by Jamie
    I currently have an app which basically runs two halves of an API - a restful API for the web app, and a synchronisation API for the native clients (all over SSL). The web app is completely javascript based and is quite similar to the native clients anyway - except it currently does not work offline. What I'm hoping to do is merge the fragmented APIs into a single restful API. The web app currently authenticates by issuing a cookie to the client whereas the native clients work using a custom HMAC access token implementation. Obviously a public/private key scenario for a javascript app is a little pointless. I think the best solution would be to create an OAuth2 endpoint on the API (like Instagram, for example http://instagram.com/developer/authentication/) which is used by both the native apps and the web app. My question is, in terms of security how does an implicit OAuth2 flow compare (storing the access token in local storage) to "secure" cookies? Presumably although SSL solves man in the middle attacks, the user could theoretically grab the access token from local storage and copy it to another machine?

    Read the article

  • Compressing 2D level data

    - by Lucius
    So, I'm developing a 2D, tile based game and a map maker thingy - all in Java. The problem is that recently I've been having some memory issues when about 4 maps are loaded. Each one of these maps are composed of 128x128 tiles and have 4 layers (for details and stuff). I already spent a good amount of time searching for solutions and the best thing I found was run-length enconding (RLE). It seems easy enough to use with static data, but is there a way to use it with data that is constantly changing, without a big drop in performance? In my maps, supposing I'm compressing the columns, I would have 128 rows, each with some amount of data (hopefully less than it would be without RLE). Whenever I change a tile, that whole row would have to be checked and I'm affraid that would slow down too much the production (and I'm in a somewhat tight schedule). Well, worst case scenario I work on each map individually, and save them using RLE, but it would be really nice if I could avoind that. EDIT: What I'm currently using to store the data for the tiles is a 2D array of HashMaps that use the layer as key and store the id of the tile in that position - like this: private HashMap< Integer, Integer [][]

    Read the article

  • Are XML Comments Necessary Documentation?

    - by Bob Horn
    I used to be a fan of requiring XML comments for documentation. I've since changed my mind for two main reasons: Like good code, methods should be self-explanatory. In practice, most XML comments are useless noise that provide no additional value. Many times we simply use GhostDoc to generate generic comments, and this is what I mean by useless noise: /// <summary> /// Gets or sets the unit of measure. /// </summary> /// <value> /// The unit of measure. /// </value> public string UnitOfMeasure { get; set; } To me, that's obvious. Having said that, if there were special instructions to include, then we should absolutely use XML comments. I like this excerpt from this article: Sometimes, you will need to write comments. But, it should be the exception not the rule. Comments should only be used when they are expressing something that cannot be expressed in code. If you want to write elegant code, strive to eliminate comments and instead write self-documenting code. Am I wrong to think we should only be using XML comments when the code isn't enough to explain itself on its own? I believe this is a good example where XML comments make pretty code look ugly. It takes a class like this... public class RawMaterialLabel : EntityBase { public long Id { get; set; } public string ManufacturerId { get; set; } public string PartNumber { get; set; } public string Quantity { get; set; } public string UnitOfMeasure { get; set; } public string LotNumber { get; set; } public string SublotNumber { get; set; } public int LabelSerialNumber { get; set; } public string PurchaseOrderNumber { get; set; } public string PurchaseOrderLineNumber { get; set; } public DateTime ManufacturingDate { get; set; } public string LastModifiedUser { get; set; } public DateTime LastModifiedTime { get; set; } public Binary VersionNumber { get; set; } public ICollection<LotEquipmentScan> LotEquipmentScans { get; private set; } } ... And turns it into this: /// <summary> /// Container for properties of a raw material label /// </summary> public class RawMaterialLabel : EntityBase { /// <summary> /// Gets or sets the id. /// </summary> /// <value> /// The id. /// </value> public long Id { get; set; } /// <summary> /// Gets or sets the manufacturer id. /// </summary> /// <value> /// The manufacturer id. /// </value> public string ManufacturerId { get; set; } /// <summary> /// Gets or sets the part number. /// </summary> /// <value> /// The part number. /// </value> public string PartNumber { get; set; } /// <summary> /// Gets or sets the quantity. /// </summary> /// <value> /// The quantity. /// </value> public string Quantity { get; set; } /// <summary> /// Gets or sets the unit of measure. /// </summary> /// <value> /// The unit of measure. /// </value> public string UnitOfMeasure { get; set; } /// <summary> /// Gets or sets the lot number. /// </summary> /// <value> /// The lot number. /// </value> public string LotNumber { get; set; } /// <summary> /// Gets or sets the sublot number. /// </summary> /// <value> /// The sublot number. /// </value> public string SublotNumber { get; set; } /// <summary> /// Gets or sets the label serial number. /// </summary> /// <value> /// The label serial number. /// </value> public int LabelSerialNumber { get; set; } /// <summary> /// Gets or sets the purchase order number. /// </summary> /// <value> /// The purchase order number. /// </value> public string PurchaseOrderNumber { get; set; } /// <summary> /// Gets or sets the purchase order line number. /// </summary> /// <value> /// The purchase order line number. /// </value> public string PurchaseOrderLineNumber { get; set; } /// <summary> /// Gets or sets the manufacturing date. /// </summary> /// <value> /// The manufacturing date. /// </value> public DateTime ManufacturingDate { get; set; } /// <summary> /// Gets or sets the last modified user. /// </summary> /// <value> /// The last modified user. /// </value> public string LastModifiedUser { get; set; } /// <summary> /// Gets or sets the last modified time. /// </summary> /// <value> /// The last modified time. /// </value> public DateTime LastModifiedTime { get; set; } /// <summary> /// Gets or sets the version number. /// </summary> /// <value> /// The version number. /// </value> public Binary VersionNumber { get; set; } /// <summary> /// Gets the lot equipment scans. /// </summary> /// <value> /// The lot equipment scans. /// </value> public ICollection<LotEquipmentScan> LotEquipmentScans { get; private set; } }

    Read the article

  • Which Bliki (Blog+Wiki) solution can you recommend?

    - by asmaier
    I'm searching for a good Bliki solution, meaning a combination of blog and wiki that I can install on my own web space. I would like to be able to write articles in the wiki style much like with media wiki. So I want to use a wiki markup language, have a revision history, comments, internal links to other pages (maybe in other languages) and be able to collaboratively edit the articles. On the other side I would like to have a blog-like view on my articles, showing new articles (and changes to existing articles) in a time ordered fashion. It would be nice if it would be possible to search through the articles and also tag the articles, so one could generate a tag cloud for the articles. A nice feature would also be to be able to order the articles according to views or even a voting system for the articles. Good would also be a permission system to keep certain articles private, showing them only to people logged in to the platform. Apart from these nice to have features an absolute must have feature for the Bliki platform I'm searching is the possibility to handle math equations (written in LaTeX syntax) and display them either as pictures like media wiki or even better using Mathjax. At the moment I'm using a web service called wikiDot which offers some of the mentioned features, however the free version shows to much advertisements, the blog feature is not mature, the design is quite ugly and loading of the page is often slow. So I want to install a Bliki solution on my own webspace. Can you recommend any solution for that?

    Read the article

  • Clean Code Development & Flexible work environment - MSCC 26.10.2013

    Finally, some spare time to summarize my impressions and experiences of the recent meetup of Mauritius Software Craftsmanship Community. I already posted my comment on the event and on our social media networks: Professional - It's getting better with our meetups and I really appreciated that 'seniors' and 'juniors' were present today. Despite running a little bit out of time it was really great to see more students coming to the gathering. This time we changed location for our Saturday meetup and it worked out very well. A big thank you to Ebene Accelerator, namely Mrs Poonum, for the ability to use their meeting rooms for our community get-together. Already some weeks ago I had a very pleasant conversation with her about the MSCC aims, 'mission' and how we organise things. Additionally, I think that an environment like the Ebene Accelerator is a good choice as it acts as an incubator for young developers and start-ups. Reactions from other craftsmen Before I put my thoughts about our recent meeting down, I'd like to mention and cross-link to some of the other craftsmen that were present: "MSCC meet up is a massive knowledge gaining strategies for students, future entrepreneurs, or for geeks all around. Knowledge sharing becomes a fun. For those who have not been able to made it do subscribe on our MSCC meet up group at meetup.com." -- Nitin on Learning is fun with #MSCC #Ebene Accelerator "We then talked about the IT industry in Mauritius, salary issues in various field like system administration, software development etc. We analysed the reasons why people tend to hop from one company to another. That was a fun debate." -- Ish on MSCC meetup - Gang of Geeks "Flexible Learning Environment was quite interesting since these lines struck cords : "You're not a secretary....9 to 5 shouldn't suit you"....This allowed reflection...deep reflection....especially regarding the local mindset...which should be changed in a way which would promote creativity rather than choking it till death..." -- Yannick on 2nd MSCC Monthly Meet-up And others on Facebook... ;-) Visual impressions are available on our Meetup event page. More first time attendees We great pleasure I noticed that we have once again more first time visitors. A quick overlook showed that we had a majority of UoM students in first, second or last year. Some of them are already participating in the UoM Computer Club or are nominated as members of the Microsoft Student Partner (MSP) programme. Personally, I really appreciate the fact that the MSCC is able to gather such a broad audience. And as I wrote initially, the MSCC is technology-agnostic; we want IT people from any segment of this business. Of course, students which are about to delve into the 'real world' of working are highly welcome, and I hope that they might get one or other glimpse of experience or advice from employees. Sticking to the schedule? No, not really... And honestly, it was a good choice to go a little bit of the beaten tracks. I mean, yes we have a 'rough' agenda of topics that we would like to talk about or having a presentation about. But we keep it 'agile'. Due to the high number of new faces, we initiated another quick round of introductions and I gave a really brief overview of the MSCC. Next, we started to reflect on the Clean Code Developer (CCD) - Red Grade which we introduced on the last meetup. Nirvan was the lucky one and he did a good job on summarizing the various abbreviations of the first level of being a CCD. Actually, more interesting, we exchanged experience about the principles and practices of Red Grade, and it was very informative to get to know that Yann actually 'interviewed' a couple of friends, other students, local guys working in IT companies as well as some IT friends from India in order to counter-check on what he learned first-hand about Clean Code. Currently, he is reading the book of Robert C. Martin on that topic and I'm looking forward to his review soon. More output generates more input What seems to be like a personal mantra is working out pretty well for me since the beginning of this year. Being more active on social media networks, writing more article on my blog, starting the Mauritius Software Craftsmanship Community, and contributing more to other online communities has helped me to receive more project requests, job offers and possibilities to expand my business at IOS Indian Ocean Software Ltd. Actually, it is not a coincidence that one of the questions new craftsmen should answer during registration asks about having a personal blog. Whether you are just curious about IT, right in the middle of your Computer Studies, or already working in software development or system administration since a while you should consider to advertise and market yourself online. Easiest way to resolve this are to have online profiles on professional social media networks like LinkedIn, Xing, Twitter, and Google+ (no Facebook should be considered for private only), and considering to have a personal blog. Why? -- Be yourself, be proud of your work, and let other people know that you're passionate about your profession. Trust me, this is going to open up opportunities you might not have dreamt about... Exchanging ideas about having a professional online presence - MSCC meetup on the 26th October 2013 Furthermore, consider to put your Curriculum Vitae online, too. There are quite a number of service providers like 1ClickCV, Stack Overflow Careers 2.0, etc. which give you the ability to have an up to date CV online. At least put it on your site, next to your personal blog. Similar to what you would be able to see on my site here. Cyber Island Mauritius - are we there? A couple of weeks ago I got a 'cold' message on LinkedIn from someone living in the U.S. asking about the circumstances and conditions of the IT world of Mauritius. He has a great business idea, venture capital and is currently looking for a team of software developers (mainly mobile - iOS) for a new startup here in Mauritius. Since then we exchanged quite some details through private messages and Skype conversations, and I suggested that it might be a good chance to join our meetup through a conference call and see for yourself about potential candidates. During approximately 30 to 40 minutes the brief idea of the new startup was presented - very promising state-of-the-art technology aspects and integration of various public APIs -, and we had a good Q&A session about it. Also thanks to the excellent bandwidth provided by the Ebene Accelerator the video conference between three parties went absolutely well. Clean Code Developer - Orange Grade Hahaha - nice one... Being at the Orange Tower at Ebene and then talking about an Orange Grade as CCD. Well, once again I provided an overview of the principles and practices in that rank of Clean Code, and similar to our last meetup we discussed on the various aspect of each principle, whether someone already got in touch with it during studies or work, and how it could affect their future view on their source code. Following are the principles and practices of Clean Code Developer - Orange Grade: CCD Orange Grade - Principles Single Level of Abstraction (SLA) Single Responsibility Principle (SRP) Separation of Concerns (SoC) Source Code conventions CCD Orange Grade - Practices Issue Tracking Automated Integration Tests Reading, Reading, Reading Reviews Especially the part on reading technical books got some extra attention. We quickly gathered our views on that and came up with a result that ranges between Zero (0) and up to Fifteen (15) book titles per year. Personally, I'm keeping my progress between Six (6) and Eight (8) titles per year, but at least One (1) per quarter of a year. Which is also connected to the fact that I'm participating in the O'Reilly Reader Review Program and have a another benefit to get access to free books only by writing and publishing a review afterwards. We also had a good exchange on the extended topic of 'Reviews' - which to my opinion is abnormal difficult here in Mauritius for various reasons. As far as I can tell from my experience working with Mauritian software developers, either as colleagues, employees or during consulting services there are unfortunately two dominant pattern on that topic: Keeping quiet Running away Honestly, I have no evidence about why these are the two 'solutions' on reviews but that's the situation that I had to face over the last couple of years. Sitting together and talking about problematic issues, tackling down root causes of de-motivational activities and working on general improvements doesn't seem to have a ground within the IT world of Mauritius. Are you a typist or a creative software craftsman? - MSCC meetup on the 26th October 2013 One very good example that we talked about was the fact of 'job hoppers' as you can easily observe it on someone's CV - those people change job every single year; for no obvious reason! Frankly speaking, I wouldn't even consider an IT person like to for an interview. As a company you're investing money and effort into the abilities of your employees. Hiring someone that won't stay for a longer period is out of question. And sorry to say, these kind of IT guys smell fishy about their capabilities and more likely to cause problems than actually produce productive results. One of the reasons why there is a probation period on an employment contract is to give you the liberty to leave as early as possible in case that you don't like your new position. Don't fool yourself or waste other people's time and money by hanging around a full year only to snatch off the bonus payment... Future outlook: Developer's Conference Even though it is not official yet I already mentioned it several times during our weekly Code & Coffee sessions. The MSCC is looking forward to be able to organise or to contribute to an upcoming IT event. Currently, the rough schedule is set for April 2014 but this mainly depends on availability of location(s), a decent time frame for preparations, and the underlying procedures with public bodies to have it approved and so on. As soon as the information about date and location has been fixed there will be a 'Call for Papers' period in order to attract local IT enthusiasts to apply for a session slot and talk about their field of work and their passion in IT. More to come for sure... My resume of the day It was a great gathering and I am very pleased about the fact that we had another 15 craftsmen (plus 2 businessmen on conference call plus 2 young apprentices) in the same room, talking about IT related topics and sharing their experience as employees and students. Personally, I really appreciated the feedback from the students about their current view on their future career, and I really hope that some of them are going to pursue their dreams. Start promoting yourself and it will happen... Looking forward to your blogs! And last but not least our numbers on Meetup and Facebook have been increased as a direct consequence of this meetup. Please, spread the word about the MSCC and get your friends and colleagues to join our official site. The higher the number of craftsmen we have the better chances we have t achieve something great! Thanks!

    Read the article

  • Linksys EA3500 : use WAN port as WAN + LAN possible?

    - by Dough
    I'm waiting for deliver of a Linksys EA3500 router. I was wondering if it was possible to get the WAN port act as normal WAN port (Internet IP) + LAN switch ? My problem is that my Internet box is in a room with NAS and PC, and the router will be in another room with TV, PS3 and PC. The Internet box have a 4 port Gigabit switch so one cable will plug from there to the router's WAN in the other room. The router will get the Internet IP from the Internet box, but will it be possible to have private network through this link too ? I could have a first network between the Internet box and the router, and another network form router and devices but that will do double NAT for nothing... Thanks for reading me and your help !

    Read the article

  • It is CX a new concept?

    - by Isabel F. Peñuelas
    The Marketing Industry and the Web Industry are talking about CX since some time. However it is only very recently that the concept has reached some common meaning accepted by the analysts’ and the IT community. The new CX model depends on two previous facts: the expansion of the social media, and the impact of the new advanced features of mobile devices regarding brand-customer interaction. CXsers vs UXers First there is some need of disambiguity between User Experience and Customer Experience. User Experience -UX, is a much well established concept related with the design of user interactions for particular devices. UX people are interested on multiple touch points of digital interfaces while CX people are interested on all kind of interfaces including physical ones. UX is an evolution of Web Usability, while CX is a marketing concept. UX is an instrument of User Experience. CX in fact is all about Connections and Interactions. Connections Dan Draper, the creative director Mad Men, understands very well that to market effectively means to connect with people, and the best way to connect to people is to use the connections people have with other people: understanding Social Media connections and taking the customer pulse of customers on those medias, and are strong facilitators of CX strategies.  Interactions We can very simply define CX as the relationship that a customer establishes with a brand through multiple touch points (interactions, channels) through the entire life cycle of his relationship- direct or indirect with the brand. Interactions can be grouped on Customer Journeys through multiple touch points defined as the path a customer follows to achieve a goal. Processes A customer journey today usually starts at the moment he surfs the Web, then he takes a purchase decision; purchases the product;  request a particular service and finally recommends or do not recommends the product.  Customer Journeys are processes, and to analyze customer journeys there exists today a broad offering of modern Customer Journey tools very similar actually to the use cases or UML activity diagrams for IT systems design. As a summary CX is nothing more and nothing less than applying process analysis methods for better understanding how to create value through customer interactions across the multiple user´s touch points with the brand.

    Read the article

  • TechEd 2012: Windows 8 And Metro

    - by Tim Murphy
    Windows 8 is here (or at least very close) and that was the main feature of this morning’s key note.  Antoine LeBlond started off by apologizing to the IT professionals since he planned on showing code.  I’m not sure if IT Pros are that easily confused or why you would need such a disclaimer.  Developers do real work, IT Pros just play with toys (just kidding). The highlights of the Windows 8 keynote for me started with some of the UI design elements that I had not seen when I was shown one of the Build tablets.  Specifically I liked the AppBar features that we have become used to with Windows Phone and some of the gesture features.  Even though they have been available on other platforms before I think Microsoft really got them right. Two other great features of Windows 8 that they demonstrated were the Hyper-V capabilities and the ability to run Windows 8 anywhere from a USB key.  My jaw dropped through the floor seeing a feature rich OS boot off of a thumb drive. WOW!  I also can’t wait to get rid of dual booting just to run Hyper-V images when developing. The morning continued with a session on Metro XAML development with Tim Heuer.  While included a lot of great XAML Metro demos, I was pleasantly surprised by some of the things I found out about Visual Studio 2012.  Finding out that Blend is now integrated with VS2012 was a nice addition after working with them as separate applications was an encouraging start. Moving on to Metro he introduced the nugget that WinRT is Async everywhere.  How deep this model goes will be an interesting thing to find out as I learn more about developing for the platform.  Thankfully he followed that up with a couple of new keywords, await and async, that eliminates a lot of plumbing that has been required in the past for asynchronous transactions. Tim also related that since the Metro framework is relatively small and most apps will use a significant amount of it the entire surface is referenced by default.  This is a contrast to adding namespace and assemblies one after another as we normally do. This was such a power packed session that I can’t detail it all here so here is the teaser list. New icons in VS2012 for extension methods Emulator/simulator testing features for gestures Portable class libraries XAML no longer managed code And so much more …   del.icio.us Tags: Windows 8,Metro,Tim Heuer,XAML,Widows Phone,Hyper-V,Antoine LeBlond,TechEd,TechEd 2012,Visual Studio 2012,Visual Studio

    Read the article

  • What is causing these visual artifacts on my OpenGL sprites?

    - by Amplify91
    What could be the cause of the defects in my characters sprite? I am using OpenGL ES 2.0. I draw my sprites in a sprite batch that uses UV coordinates from one large texture atlas. If you look around the character' edges, you'll see two noticeable problems: The invisible alpha background is not invisible, but shows a strange static-like background. There are unwanted streaks where the character nears the edge of the frame (but only in some frames of the animation, this happened to be one of them). Any idea what could be causing these? I will provide related code if asked for, but I'll try to avoid just dumping the entire project and expecting someone to look through it all. EDIT: Here's a bit of code: This is how I generate my UV coordinates: private float[] createFrameUV(int frameWidth, int frameHeight, int x, int y){ float[] uv = new float[4]; if(numberOfFrames>1){ float width = (float)frameWidth / (float)mBitmap.getWidth(); float height = (float)frameHeight / (float)mBitmap.getHeight(); float u = (float)x / (float)mBitmap.getWidth(); float v = (float)y / (float)mBitmap.getHeight(); uv[0] = u; uv[1] = v; uv[2] = u + width; uv[3] = v + height; }else{ uv[0] = 0f; uv[1] = 0f; uv[2] = 1f; uv[3] = 1f; } return uv; } These are some OpenGL settings: GLES20.glTexParameterf(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_MIN_FILTER, GLES20.GL_LINEAR); GLES20.glTexParameterf(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_MAG_FILTER, GLES20.GL_LINEAR); GLES20.glTexParameterf(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_WRAP_S, GLES20.GL_CLAMP_TO_EDGE); GLES20.glTexParameterf(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_WRAP_T, GLES20.GL_CLAMP_TO_EDGE);

    Read the article

< Previous Page | 605 606 607 608 609 610 611 612 613 614 615 616  | Next Page >