Search Results

Search found 88675 results on 3547 pages for 'graphical code'.

Page 610/3547 | < Previous Page | 606 607 608 609 610 611 612 613 614 615 616 617  | Next Page >

• bridge to share WiFi internet connection over eth0

  - by rubo77

  In this script there is implemented that you create a mesh network and connect other machines to your device to serve an internet connection with dhcp: echo "starting bridge to share internet connection over eth0" ifconfig eth0 up promisc brctl addbr br-freifunk brctl addif br-freifunk bat0 brctl addif br-freifunk eth0 echo "internet starting, this may take some minutes due to latency..." echo "(use" echo "tail -f /var/log/syslog" echo "in another window for debugging)" echo echo dhclient br-freifunk echo "The error 'Rather than invoking init scripts through /etc/init.d...' can be ignored:" dhclient br-freifunk # without bridge: dhclient bat0 This works fine with the freifunk-mesh network. But how can I serve internet in a normal case? I would like to connect to any open Wifi I find with my network-manager or wicd (yes, with the graphical GUI) and then start a small script that creates a bridge to my network-out on my laptop I use Ubuntu and my networkcards are eth0 and wlan0

  Read the article

• How to add delay in autologin

  - by raj

  I enabled autologin in my system (CentOS 6.2) for that I edited this file /etc/gdm/custom.conf In that I entered this code [daemon] AutomaticLoginEnable=true AutomaticLogin=test Here test means one account name, for that account autologin is working but the problem is not possible to logout. That is because everytime while I logout it will go to gdm(graphical display manager) and there it Again checks for account test. It is available right so it will again login to same account. Here I want add delay, that means it should wait for sometime, If no one login to any other account, then only test account will log. how to add delay?

  Read the article

• Is there a constraint-based scheduling/calendar application?

  - by wonsungi

  Is there a constraint-based scheduling/calendar application? This application would be used to coordinate multiple people's schedules. Two basic use cases: Multiple people need to schedule a time to meet together. Everyone is busy at different days/times. Each person enters blocks of days/times they cannot meet, and the application suggests the best times to meet given a desired time range. Multiple people need to use some common resources for a specific length of time (over some time span like a week), but the exact date/time does not matter. These people enter the resources and time needed, and the application suggests the best way to share these resources. This use case still accounts for people's blocks of busy time. I imagine this program would be graphical, but other interfaces would be acceptable. Also preferable if web-based/works on both PC's and Mac's, but PC-only/Mac-only solutions are acceptable.

  Read the article

• Upload a directory recursively to an FTP server

  - by Nicolas Raoul

  I am writing a Linux shell script to copy a local directory to a remote server (removing any existing files). Local server: ftp and lftp commands are available, no ncftp or any graphical tools. Remote server: only accessible via FTP. No rsync nor SSH nor FXP. I am thinking about listing local and remote files to generate a lftp script and then run it. Is there a better way? Note: Uploading only modified files would be a plus, but not required

  Read the article

• Looking for a router-like web interface for my Debian gateway.

  - by marcusw

  Hey, I need a web interface program for my debian gateway which has the features of a router's one. Specifically, I must be able to easily Forward ports to various clients on the LAN or the router itself (it's also a server) Manage a DHCP server preferably including DHCP reservation for certain MACs Give me a list of the connected DHCP clients (optionally) Show which clients are the most active as far as bandwidth (something like iftop) Alternatively, it could be a graphical app which I could tunnel over ssh. No command line programs please...I'm used to doing this stuff with a point-and-click interface. Not adverse to command-line setup; just need to be able to reconfigure things graphically. Have a working LAMP setup. I've tried webmin, but it didn't satisfy the "easy" part...too many clicks and too many meny options.

  Read the article

• Is there some way Linux editors can tell the programming language without the file extension?

  - by vfclists

  I am editing some scripts on Linux without the languages file extensions, and it seems that the editors, namely vi, nano and gedit are not applying syntax highlighting because the filenames don't use the language extensions. Is there some parameters to be passed or some setting that can enable them to recognize the language? Update: After some googling I realize that bash has that ability, at least to do some parsing or check the shebang at the top determine the language. By default Ubuntu does not install the complete vim package, so after installing it, the shell files are recognized. I don't know about nano or gedit, but vi and its graphical counterpart will do.

  Read the article

• Why are applications slowing down on the computer's second monitor?

  - by ChristianLinnell

  Here's an interesting one. Problem I have a user on Windows XP who is running a web application inside IE8. She has two monitors plugged in via DVI cables. When she is working the the browser on her primary monitor, everything is fine, but when she drags the window over to the second monitor, the web applications functionality grinds to a halt. It's not just web apps either - many applications exhibit the problem. What I've tried Switching the two monitors in the OS. It's obviously not the monitor's fault. Confirmed that it's the app slowing down, and not the graphical rendering. The application in question actually locks up. The mouse is unaffected, and I can drag other windows on top of the problematic application. Any ideas?

  Read the article

• Windows 7 connect to Lion file sharing

  - by Automaton

  Trying to access my Mac from a Windows 7 computer, I fail with the infamous error 86 incorrect password. Now this appears to be a well-known problem with countless threads on the internet giving as many "solutions" as there are discussion threads about it (mostly ranging from installing third-party commercial samba servers, to switching to some other protocol, to compiling a plain-vanilla Samba installation - the latter which I will probably do when I give up this :) ) I am stubborn, and I believe there must be some problem here that can be solved or worked around, but there is surprisingly little detail about this problem. It appears to have something to do with a mismatch of authentication methods. Trying to run samba in debug mode: sudo /usr/sbin/smbd -debug -stdout gets me this output when trying to access it from Win 7 ... smb1_dispatch_one [smb_dispatch.cpp:377] dispatching SMB_COM_SESSION_SETUP_ANDX smb1_dispatch_session_setup [session_setup.cpp:261] FIXME erase existing sessions log_gss_error [gssapi_mechanism.cpp:97] gssapi: gss-code: Miscellaneous failure (see text) log_gss_error [gssapi_mechanism.cpp:113] gssapi: mech-code: unknown mech-code 22 for mech unknown What is the problem here, and how do I fix it?

  Read the article

• Apache .htaccess problem: No input file specified.

  - by Michal M

  Hello Everyone, Can someone help me with this. I'm feeling like I've been hitting my head against a wall for over 2 hrs now. I've got Apache 2.2.8 + PHP 5.2.6 installed on my machine and the .htacces with code below works fine, no errors. RewriteEngine on RewriteCond $1 !^(index\.php|css|gfx|js|swf|robots\.txt|favicon\.ico) RewriteRule ^(.*)$ /index.php/$1 [L] The same code on my hosting provider server gives me a 404 error code and outputs only: No input file specified. index.php IS there. I know they have Apache installed (cannot find version info anywhere) and they're running PHP v5.2.8. I'm on windows xp 64-bit, they're running some Linux and php in cgi/fastcgi mode. Can anyone suggest what could be the problem? PS. if that's important that's for CodeIgniter to work with friendly URLs.

  Read the article

• Ubuntu 10.04 User Interface errors

  - by user306668

  Hi Guys Using Ubuntu 10.04 Beta on a Sony Vaio laptop (slightly old PCG-4n7M). It was working wonderfully until this morning. After updating and upgrading the login screen images gave broken image icons, then on logging in UI was replaced with just the cmd shell. All menus are gone. I have tried to reconfigure xserver-xorg and that doesn't work. Reinstalling doesn't either. I have tried a number of other attempts. What is weird is that I can launch graphical applications from the cmd line. such as firefox or google-chrome. and they work but the UI is simplified or broken (no resizing, closing, minimizing). I am a bit lost on how to fix this error. If anyone has any suggestions, please let me know

  Read the article

• Having to Toggle Between Two Sets of Video Drivers

  - by Maarx

  So, I've got a Win7 64-bit gaming PC with GTX 260's. Recently, StarCraft 2 had an issue with flickering, which NVidia fixed with a new set of drivers. However, these new drivers induce unplayable graphical errors with Neverwinter Nights 2, something me and my friends still play from time to time. I am seeking advice on the "best" way to rectify this situation, to be able to switch between two driver releases, without compromising the stability of my system (if Windows stability isn't an oxymoron). I'm wondering if Windows 7 is structured in such a way that I can constantly reinstall these two sets of drivers back and forth overtop each other, possibly six or eight times a day, without very quickly driving myself to reformat to maintain that "just like new" performance. I'm loathe to have to reformat the drive and maintain two copies of the operating system, but I'll do it if I have to.

  Read the article

• Alternatives to Citrix GoToAssist ?

  - by Evan Carroll

  Citrix GoToAssist is a really nifty little web application for customer support that allows you to take control of someones OSX, or Windows machine. Essentially, it works likes this: You log in to your management console You get a code You give them a code, and a website (fastsupport.com) They go there and enter in the code They accept the browser applet which installs a program on their computer You have control of their desktop You can see their desktop, configure applications, etc. They can also see when you disconnect. It is really rather nifty, but it doesn't support Linux and it is rather expensive (660$ a year). Does anyone know of any alternatives to this? I'm looking for a solution as simple on the user as this one, that doesn't require firewall configuration or setting up ssh/vnc/rdesktop etc.

  Read the article

• Qemu in an ssh session or the quest for the nographic option ?

  - by LB

  Hi, I ssh to a machine and I would like to start a qemu session inside this ssh session. I thought that the nographic option would do the trick. -nographic Normally, QEMU uses SDL to display the VGA output. With this option, you can totally disable graphical output so that QEMU is a simple command line application. The emulated serial port is redirected on the console. Therefore, you can still use QEMU to debug a Linux kernel with a serial console. but unfortunately, i don't see any output. The command line that i'm using once i've sshed to my machine is : qemu-system-x86_64 -hda debian.img -nographic any idea ? thanks.

  Read the article

• How to change the terminal to SCO compliant in Ubuntu

  - by kaushik

  I have a server in which SCO 5.x is installed. I have several thin clients which were supplied from our head office. Those thin clients have linux pre-installed in them. When we tried to connect to our SCO server, we have found out that the thin client does not support SCO terminal type. So the program (Which is written in Oracle forms) is not working correctly. Lots of function keys stopped working and screen also not getting refreshed correctly. Hence we decided to use Ubuntu Live USB keys in thin clients. Now the problem is how can we change the terminal type to SCO in ubuntu ? Means I want it in the text terminal (Alt+Ctrl+F1,F2...) (Not in xterm...graphical terminal emulators). Does ubuntu support SCO terminal type ?

  Read the article

• Common filesystem for servers behind a rackspace load balancer

  - by thanos panousis

  Our PHP application consists of a single web server that will receive files from clients and perform a CPU-intensive analysis on them. Right now, analysis of a single user upload can take 3sec to conclude and take 100% CPU. This makes our system capacity amount to 1/3 requests per second. My team's requirement is to increase capacity without a lot of code reengineering. A possible solution would be to set up a load balancer in front of multiple servers running the same app, connecting to a common DB. The problem is that the analysis outputs files on disk. A load balancer would increase capacity, but then files won't be available between servers so consequent client requests may fail. We are hosted on Rackspace, is there a way to configure some sort of "common" storage for all servers, without having to rewrite our file persistance code? Current code relies on simple fopens etc. What are our options?

  Read the article

• Linux web server shared hosting file errors

  - by dfilkovi

  I'm using a shared hosting to host my website and have some problems with files from time to time. First, one of my file (php) was missing a part of code (nothing to do with hackers just a random piece of code was missing), then after some time a value inside a mysql table was also missing a part, then a whole table column disappeared, after that a whole file on my site disappeared and lastly again some code from a file disappeared, my hosting service says it has nothing to do with them, but this is stupid, how can this happen, no hacker attack could do such a thing, I believe it's some kind of a disk corruption or bad backup. Anyone have any ideas?

  Read the article

• Multiple Graphics Cards on Fedora 15 (Gnome 3)

  - by Michael

  I have the (delightful) misfortune of having 3 graphics cards. They are XFX Radeon 5750s. Each drives 2 monitors via dvi. I am having a really hard time getting these running on fedora 15 (gnome 3). So my setup is 3 columns of 2 monitors (the upper monitor is mounted upside down in each column to reduce the bezel between monitors). When the (graphical) login screen comes up all 6 have the blue stripey background that must be the default, but then when I login, things get interesting. In the xorg.conf below, you will see only 2 of the screens in the serverlayout while the other 4 are commented out. Logging in with only 2 of the screens active works well (and it even remembers that the top one is upside down, and should be considered above the lower, i am not sure where it stores this info, but i set it using the graphical "Displays" settings) However, as soon as I uncomment a third screen, or more, it gives me an error message when I login. It's one of those friendly, less helpful messages (Oh no! Something has gone wrong. A problem has occurred and the system can't recover. Please log out and try again). If i do not use an xorg.conf, then the "Displays" prefs pane shows only the two monitors on one of my graphics cards Thanks to anyone who can help me get going! (xorg.conf and then lspci below, and xorg log) xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen "Screen0" 0 0 Screen "Screen1" Below "Screen0" # Screen "Screen2" RightOf "Screen0" # Screen "Screen3" RightOf "Screen1" # Screen "Screen4" RightOf "Screen3" # Screen "Screen5" RightOf "Screen4" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "catalogue:/etc/X11/fontpath.d" FontPath "built-ins" EndSection Section "Module" Load "record" Load "dri" Load "dbe" Load "extmod" Load "dri2" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor4" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor5" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" Identifier "Card0" Driver "radeon" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Card1" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Card2" Driver "radeon" BusID "PCI:6:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card0" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card1" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Card1" Monitor "Monitor3" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen4" Device "Card2" Monitor "Monitor4" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen5" Device "Card2" Monitor "Monitor5" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection lspci output follows [tgm@tgm ~]$ lspci 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 02:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:02.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 04:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 04:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 05:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 05:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 06:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 06:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) xorg log (posted to fpaste due to how long it is. thanks to marcusw for the request) http://www.fpaste.org/r5ww/ xorg log with all 6 monitors enabled in xorg.conf (they all turn on and have blue, but then one gets the aforementioned user-friendly error message). http://www.fpaste.org/X63H/

  Read the article

• Conditional formatting & vlookup

  - by zorama

  Please help me with the formula: Main Sheet is Sheet2 B COLUMN I want to look up sheet1 A & B columns with Sheet2 A & B columns from 1 workbook that if sheet2 A are same/equal as Sheet1 A column, also if Sheet2 B column are same/equal as Sheet1 B column , how will I highlight the Sheet2 B column that if Sheet1 A & B + Sheet2 A & B are exactly equal . EXAMPLE: SHEET 1 SHEET 2 SHEET 2 Result A B A B A B CODE NO CODE NO CODE NO A 12 B 205 B 205 (highlight to red) B 105 B 20 B 20 (highlight to red) A 45 B 100 B 100 A 56 A 56 A 56 (highlight to red) A 78 B 25 B 25 A 100 A 12 A 12 (highlight to red) B 77 A 45 A 45 (highlight to red) B 108 A 20000 A 20000 B 20 B 205

  Read the article

• Can I use only a HDMI monitor?

  - by Felix

  I recently found out there are such things as PC monitors with TV capabilities (or TVs that can be PC monitors), and the idea kind of tickles my fancy. I'm thinking of getting one of these gadgets, and if I do, I will connect it to my PC via HDMI (my graphics card has builtin HDMI), so that I also get sound to the TV. The reason for this is because I have a 2.1 sound system which I want to use both on the PC and the TV. Basically, I want the configuration to look like this: Cable --------> TV --> 2.1 Sound System PC --HDMI--> TV --> 2.1 Sound System My question is: can I use a setup like this? Can I not have a classic VGA monitor? Will I be able to see non-graphical interfaces (such as the BIOS, GRUB, a Linux terminal, ...) through HDMI on the TV? I use Windows 7 and Ubuntu.

  Read the article

• Will Windows Barf on Constant Video Driver Overwrite?

  - by Maarx

  So, I've got a Win7 64-bit gaming PC with GTX 260's. Recently, StarCraft 2 had an issue with flickering, which NVidia fixed with a new set of drivers. However, these new drivers induce unplayable graphical errors with Neverwinter Nights 2, something me and my friends still play from time to time. I am seeking advice on the "best" way to rectify this situation, to be able to switch between two driver releases, without compromising the stability of my system (if Windows stability isn't an oxymoron). I'm wondering if Windows 7 is structured in such a way that I can constantly reinstall these two sets of drivers back and forth overtop each other, possibly six or eight times a day, without very quickly driving myself to reformat to maintain that "just like new" performance. I'm loathe to have to reformat the drive and maintain two copies of the operating system, but I'll do it if I have to.

  Read the article

• Reset All My Passwords

  - by E-rich

  I know there are some great apps out there for keeping track of passwords (see how-do-you-keep-track-of-all-your-passwords if you aren't familiar). I'm interested in additional features for managing my passwords, particularly to reset all my passwords. I can imagine that this feature would be pretty complicated to implement, considering: websites have different methods for resetting a password client applications most likely don't have a means to change a password except for through a graphical user interface (as opposed to providing a command line command) So, I'm curious if there is a solution out there and I just haven't found it. If not, perhaps I will have to start another side project.

  Read the article

• Recently reloaded computer, now have trailing effect when windows overlap

  - by Tony

  I recently did a clean install of my home machine and I am having a weird graphical error where if I move one window across the top of another it leaves a trail: I have the most recent NVIDIA drivers installed and nothing new is installed on my machine than before the reload (and I never had this issue before). I have two monitors and it happens on both so I'm sure it isn't a hardware issue (the card and my main monitor are also both less than 6 months old) I've also noticed a ripple when scrolling down on web pages which I believe is related. Any ideas what might be causing this and solutions to fix it?

  Read the article

• MS Word 2007 Mail Merge fails on ZIP codes with leading Zeros (eg. 01234)

  - by Pretzel

  I have an Excel Spreadsheet with a ZIP code column. For some dumb reason the original spreadsheet I got had all the zip codes stored as numbers, so a ZIP code like 01234 was stored as 1234. Easy to fix with "Format Column" as "Special = ZIP Code". All values like 1234, show up as 01234. Great! When I import it into Word via Mail Merge (to print address labels), the ZIP codes on all the addresses starting with a leading zero (like 01234) revert to their old form (1234). How do I fix this?

  Read the article

• What is your company's stance on Developers using Laptops?

  - by codepunk

  I am a developer and my company is moving towards a "no laptop" policy in fear of them being lost or stolen and source code being compromised. Now I don't work for NASA, the military or anything labeled Top Secret but our code is very important to our business nonetheless (as all source code would be). I'll be honest, I disagree with this policy against laptops and wanted to see what others think. I'd like to know: What is your team/company's stance on laptops Your company's size and/or field (small, medium or large, Fortune 500, etc). Whether you've had to take any extra precautions (signing any additional legal, ensure your hard drive is encrypted, etc). Thanks!

  Read the article

• Kill xserver from command line (init 3/5 does not work)

  - by Richard Martinez

  I'm running Linux Mint 10, although I've had this same issue with other variants of Linux. I've been told/found while researching that if the X server hangs or otherwise errors, one can drop to a root prompt, usually at another tty, and execute init 3 (to drop to single user mode) and then init 5 to return to the default, graphical session. Needless to say, I've tried this before in multiple configurations on multiple machines to no avail. The only feedback I receive form executing those two commands is a listing of VMWare services (from a kernel module) that are stopped and then restarted. Note: If I run startx (either before or after init 3), then I am told that the xserver is still running and that I should remove /tmp/.X0-lock. Having tried that, it removes that error message, but claims that the xserver cannot be attached as another instance is running. How do I kill the xserver completely? Can I killall some process name?

  Read the article

< Previous Page | 606 607 608 609 610 611 612 613 614 615 616 617  | Next Page >