Search Results

Search found 20116 results on 805 pages for 'network flow'.

Page 611/805 | < Previous Page | 607 608 609 610 611 612 613 614 615 616 617 618  | Next Page >

• Open NetApp CIFS Share

  - by kingfish

  I have a CIFS share on a NetApp device. I want this share to be completely open to any user/computer on the same network. I don't want any authentication (domain, workgroup, etc) required; no login/password should need to be provided. Currently I have CIFS configured to use "Domain - Windows 2000" authentication and have the permissions on the share set to "Everyone - Full Read/Write" but if you try to connect to it from a machine that isn't bound to the domain it is asking for login info.

  Read the article

• Ubuntu 12.04 host lookups extremely slow

  - by tubaguy50035

  I'm having issues with one of my servers taking a long time to look up host names. This is an Ubuntu 12.04 box, so I've tried following the new resolvconf directives. In my /etc/network/interfaces file, I defined my name servers like this: auto eth0 iface eth0 inet static address someaddress netmask 255.255.255.0 gateway 198.58.103.1 dns-nameservers 74.14.179.5 72.14.188.5 In my /etc/resolv.conf, I see these name servers, like this: # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 74.14.179.5 nameserver 72.14.188.5 On another box, I edited the resolv.conf directly as directed by my hosts' setup help files. It looks like this: domain members.linode.com search members.linode.com nameserver 72.14.179.5 nameserver 72.14.188.5 options rotate This second box has no issues with host name look ups and responds quite quickly. Could not having the domain and search directives make my look ups slow? By slow, I mean it's taking anywhere from 5 to 15 seconds to find the IP address of a host.

  Read the article

• wrong kernel running after install

  - by ticktockhouse

  I have installed Ubuntu 14.04 from unetbootin. When it reboots after the install, uname -r says: 3.5.0-17-generic ..this means that no modules have loaded for the kernel that is actually installed (3.13.0-32-generic). Does anyone know why this kernel should be installed via the install process? Is it an artifact of using Unetbootin? Booting into the Unetbootin image gives the correct kernel, and thus the modules load. Knowing why is one thing, but I'm not sure how to remedy it now. Because no modules are loaded, I can't connect to the network or connect a USB drive. I've tried update-grub, which seems to find the correct kernel, but doesn't seem to tell the system to boot from it. I've also tried selecting the kernel at boot time using the "Advanced Options for Ubuntu", and the 3.13.x kernel is the only one listed. Selecting this lead to the 3.5.x kernel stubbornly loading.. I'm a fairly accomplished sysadmin, but this one has me flummoxed :) Can anyone help?

  Read the article

• esx 4 - c7000 - cisco 3020

  - by gdavid

  I have 4 blades with esx 4 installed in a HP c7000 enclosure. They have 6 cisco 3020 for hp switches in the backend. The plan was to use 2 switches for iSCSI traffic and the other 4 for data traffic. I am having a problem trunking the switches to our existing environment. The documentation i keep finding online has commands/features that are not available on the 3020 switch. Does anyone have this setup anywhere? I am looking to do Virtual Switch Tagging (VST) so i can control the machines vlan via the port groups. The only time any configuration worked for us was when our network team placed the command switchport native vlan x this setup only allowed vlan x to pass traffic and only when the port group was in vlan 0. Ideas? thanks for any help. -GD

  Read the article

• Prevent machine in a LAN from receiving a remote shutdown

  - by WebDevHobo

  I'm probably just overreacting, but I recently came across a LAN-scanner that showed me the option "remote shutdown", for all found computers on the scanned network. Now, how exactly does this work? If I send such a message, will the shutdown happen no matter what, or is it required to have the password/user-name of the user of that other computer. Mostly I'm wondering: can this be done to me and how do I prevent it? EDIT: what's more, I had the scanner check for shares. The result being this: Double clicking the links opens them in explorer, basically meaning my entire C and F drive(only 2 HD's I have) are completely exposed to anyone in my LAN. Or can I open these because it's my own machine?

  Read the article

• How do I securely share / allow access to a drive?

  - by sleske

  To simplify backing up a laptop (Windows Vista), I'm planning on sharing its C: drive (with password protection) and using that to back it up from another computer. What are the security implications of this? If I share C: with a reasonable password, how big is the risk of compromise if the system is e.g. inadvertently used on a public WLAN or similar? Background: I'm planning to use [Areca Backup][1] to back up two systems (Windows XP and Vista). My current plan is to install Areca on the XP box, and share the Vista system's C: as a shared folder, so the XP system can read it. Then I can set up the drive as a network drive and have Areca read it like a local drive. Of course, if you can think of a more elegant way of doing this, I'm open to suggestions.

  Read the article

• Where can I configure wireless to be passed on to the Virtualbox guest?

  - by huahsin68

  I have WinXP install in virtualbox which host in Linux. I have a TP-Link (TP-WN321G) USB wifi adapter and have the driver installed inside WinXP. When I plug-in the wifi adapter, there is an option show "Ralink 802.11g WLAN [0101]" in the virtualbox's USB icon, tick on that option, the Device Manager able to detect the hardware which shows TP-Link, but when look into the properties, it says there is no driver was install. I did try to install Ralink driver but still no luck. Just curious why my wifi adapter is TP-Link, but the option show Ralink? May I know how can I emulate the wireless network inside WindowsXP?

  Read the article

• Preventing SSH RSA host key warnings for change of key vs IP address

  - by Adam M-W

  I have a network with DHCP enabled, and also a computer that dual boots operating systems and has different SSH keys on each (and yes, I would like to keep different keys on each rather than copying the same identity/private key to each). Because the IP address does not change between operating systems because the MAC address is the same, when connecting to ssh, even when not using the IP address but the hostname via DNS/mDNS, I get the warning: Warning: the RSA host key for 'hostname' differs from the key for the IP address '192.168.1.172' Offending key for IP in /Users/user/.ssh/known_hosts:37 Matching host key in /Users/user/.ssh/known_hosts:38 Are you sure you want to continue connecting (yes/no)? How can I surpress the warning when the hostname differs from the IP address for that hostname, but retain the ability to check host keys are the same for each hostname? (each OS has a unique hostname)

  Read the article

• Dhcp clients fail after successful import of server to new machine

  - by Tathagata

  I transfered the configs of a dhcp server from one server to another both running Windows Server 2003 R2 following http [://] support.microsoft.com/kb/325473. The new server has a statically configured ip(outside the scope) like the old one. Stopped the server on the old, and started up in the new server (authorized too) - but when I ipconfig /renew from a client its network interface fails with all 0.0.0.0 (or 169...*). I read somewhere I need to reconcile the scope to sync the new registry values ('ll try this tomorrow). What other troubleshooting steps can I take other than these (which didn't help)? Things work fine when the old server resurrects and the new one is taken down. The new server showed there was no requests for offer.

  Read the article

• Force logoff of idle users on Windows 7 workstation with fast user switching enabled

  - by newmanth

  We have mission-critical Windows 7 workstations on our network that must be available to any user at any time, even when it has been locked by a prior user. Thus, we have fast user switching enabled. Unfortunately, it's not unusual for us to have a dozen or more different users logged onto the same machine at the same time, with a corresponding degradation in service. We've done our best at educating the masses to log off at the end of their shift. But users being users, this does not happen on a consistent basis. Does anyone know of a clean way to force logoff idle users after a certain amount of time has elapsed? I am open to any method that could be deployed/configured via script, GPO, or SCCM.

  Read the article

• Sharing internet connection with WDS

  - by cornjuliox

  Is it possible to share an internet connection through WDS? I'm on the very edge of a wireless network, the spot that I'm in maintains a stable 22% according to XP with the help of a parabolic reflector crafted from a cheap pie tin. I was thinking I could grab another wireless router, use WDS to bridge the this router with the other one and share the 'net connection through it thus giving me a little bit more freedom but when I tried it it didn't work. WDS looks like it bridged the networks just fine, but I couldn't access anything on the internet. Do I need to do anything special or is this just not possible?

  Read the article

• iTunes randomly plays songs while importing, and can't be stopped

  - by Steve Bennett

  I'm importing a gazillion songs over the network into iTunes. Every now and then, it starts playing the song it's currently importing. And because iTunes is basically frozen up during the import process, I can't actually stop it. Then it will suddenly jump to another song a bit later on. Pretty irritating. Is it a known issue? Anything I can do about it? Versions (oops): iTunes 10.5 (141), OS X 10.6.8

  Read the article

• connect to paltalk server using a proxy

  - by Navid

  Hi I want to use paltalk, which is a kind of chat software, but the ports that this applications uses are closed in my country. What I need to do is to use a proxy server. Unfortunately the software itself does not provide a proxy setting. I though it would be possible to run paltalk on an O.S. installed on a virtual machine (say virtualbox) and configure the network setting of virtual machine to direct all its traffic through a proxy on host Operating system, but I could not find a way to do so neither. can anyone please help me?

  Read the article

• Windows 7 Ult machine can see XP Pro but not vice versa

  - by Chadworthington

  My new Windows 7 Ult. PC can attach to my work laptop and pull files but my work laptop cannot find my Windows 7 on the network. Is there some sort of limitation going on here? Before I got the new XP machine, my old XP Pro PC could pull files from the XP Pro laptop but not vice versa. The common thread seems to be that the work laptop cannot see other PCs, Windows 7 or not. Could it be because that PC is on a work domain? When I pull files from the work PC, I am prompted for domain credentials, which I provide.

  Read the article

• Oh snap! My RPi was upgraded to 512MB! Woo-hoo!

  - by hinkmond

  I ordered a Raspberry Pi Model B (256MB) over 4 months ago on backorder. When it finally came I saw it was upgraded to the new half a gig model! Woot! But, all was not perfect. Gary C. told me the shipped configuration of the new RPi models didn't have the right firmware for 512MB, and I had to upgrade the start.elf in the /boot directory to recognize all of the 512MB RAM. I did a "free" command, and sure enough saw only 240MB. Sadness. But, Gary gave me a copy of his start.elf which worked after some trail and error. For anyone ordering the new RPi Model B w/512MB, here are the steps to get you going with full 512MB RAM: sudo apt-get update --fix-missing sudo apt-get upgrade --fix-missing # NOTE: This step takes at least a couple hours on a # fast network wget https://raw.github.com/raspberrypi/firmware/\ 164b0fe2b3b56081c7510df93bc1440aebe45f7e/boot/\ arm496_start.elf sudo mv /boot/start.elf /boot/orig-start.elf sudo mv arm496_start.elf /boot/start.elf sudo reboot free total used free shared buffers cached Mem: 497768 210596 287172 0 16892 169624 -/+ buffers/cache: 24080 473688 Swap: 102396 0 102396 So of course this means... (drumroll) there is now 498MB available for the Java Embedded heap! java -Xmx400m -version java version "1.7.0_06" Java(TM) SE Embedded Runtime Environment (build 1.7.0_06-b24, headless) Java HotSpot(TM) Embedded Client VM (build 23.2-b09, mixed mode) Yeah, baby! Hinkmond

  Read the article

• Alternatives to Crashplan for VPS?

  - by Chloe

  I use SFTP Net Drive to mount a remote VPS so I can back it up. However, it's taken over 3+ days to scan! I ran 'ls -lR' from my desktop over the mounted network drive and it only took about 5m to list all the files! There are only about 5000 files and 2 GB. I know Crashplan can run headless on the VPS itself, but that sounds like a pain to set up, and it takes so much memory on the server. The VPS doesn't have a lot of memory to spare - it's less than my desktop. Is there another program that can communicate with a Crashplan backup protocol and has a command line interface? backup /home

  Read the article

• fstab and cifs mounting, possible to store authentication information outside of fstab?

  - by tj111

  I am currently using cifs to mount some network shares (that require authentication) in /etc/fstab. It works excellently, but I would like to move the authentication details (username/pass) outside of fstab and be able to chmod it 600 (as fstab can have issues if I were to change its permissions). I was wondering if it is possible to do this (many-user system, don't want these permissions to be viewable by all users). from: //server/foo/bar /mnt/bar cifs username=user,password=pass,r 0 0 to: //server/foo/bar /mnt/bar cifs <link to permissions>,r 0 0 (or something analogous to this). Thanks.

  Read the article

• Unable to connect to remote MS SQL Server 2008 Express SP3 instance by name

  - by Max

  I am trying to connect to a remote MS SQL Server 2008 SP3 x86 Instance using it's name. At the first glance all seems to work well (e.g. it is possible to connect to the server locally and succesfully telnet it's port remotely), but there is a thing I can't understand... This line should connect us to the default instance of remote SQL Server: osql -S ServerIP -d MyDatabase /U sa -P MyPassword and it does the trick, however the next one: osql -S ServerIP\MyInstance -d MyDatabase /U sa -P MyPassword ends up with the following error: [SQL Native Client]SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. [SQL Native Client]Login timeout expired [SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. The only instance running on the server is MyInstance, which is (I guess) the default one. Could you please put some time in explaining the issue.

  Read the article

• HP Media Smart remote access

  - by Coov

  I just purchased this box for home backups for my pc's and mac's. Everything works great accept for the remote access part. I can RD into the machine locally but I can't get to it from outside of my network. I've enabled port forwarding on my router but it doesn't seem to matter. I checked with Qwest and they don't block these ports so I'm at a loss. I do have Vonage in front of my router but I've taken it out and it didn't make a difference. I suspect I've made an error with my router setup. I'm a programmer and I'm playing in the world of the unknown here. I'm lost. Any suggestions?

  Read the article

• Only one user can connect to Ubuntu samba server

  - by StaticMethod

  I setup a samba server on 12.04 LTS, and it works great for one user but not the others. I am trying to map a network drive from a windows 7 laptop. I can successfully authenticate with one user, but the other two both get "Access is denied" errors. Here is my smb.conf file. [global] server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers [share] comment = Ubuntu File Server Share path = /srv/share read only = No create mask = 0755 I know that the service is successfully reading from the /etc/passwd file because if I change the Linux password for the user that works, I have to use the new password when I connect. I changed all the users so they are all members of the same groups (all three users are admins anyway). I only ever have one user connected at a time. Here are the permissions on the shared folder /srv$ ls -l drwxrwxrwx 1 nobody nogroup 16 Feb 22 17:05 share Any ideas?

  Read the article

• Storage setup for large files

  - by Mecca

  I need to store over 200TB of data (all types, biggest being video files) and be able to access it over a local network. The files will be accessed for editing or searches. I don't need versioning, but a setup that would keep me safe from harddrive failures would be nice. Right now the content is on different harddrives, some external drives, some regular. I don't exclude the possibility of buying new/extra drives if necessary. If they will ever be exposed to the web, it wont be to the public, but just a couple of people. I have no idea what to buy to make this happen. I see some NAS solutions over the internet like this http://www.bestbuy.com/site/a/2266043.p?id=1218317764591&skuId=2266043 but the storage is not enough, plus it doesn't seem to be scalable. What do you recommend? Thanks

  Read the article

• How do I setup a local DNS server on Mac OS Lion?

  - by Peter Kovacs

  I had some serious lag to resolve website address and sometimes things simply wouldn't load (pages kept loading for 5+ minutes without even a timeout error). So I had setup a local dns server/cache using BIND on Leopard and Snow Leopard. Now that I have Lion, i have the same problem, but the instructions no longer apply to Lion and I can't find a way to do it. Has anyone attempted to do this? Are there viable alternatives for DNS servers on OS X 10.7? For those who are wondering I already tried several external DNS server. Only my computer has this issue on the network.

  Read the article

• How can I VPN into a domain and act as if it is local?

  - by Duall

  I've looked and looked and the internet seems to have finally failed me, there's no information on my specific issue. I have two locations, and one server (sbs 2008); I need them to act like one physical LAN. I know it's possible, I just know how to set it up, or anything about VPNs, etc. So, just to clarify a bit more: 1 Small Business Server 2008 ~30 Computers with varying systems from Windows XP to 7 2 Physical Locations I use redirected folders, but since that would consume a lot of bandwith over VPN, I have a machine over there that can be the workhorse for storage. Users need to access e-mail and shared databases from this server (or possibly some form of DFS with aforementioned workhorse) from the other building. Is there a nice tutorial (or I nice person that wants to write it) online that can explain how to set up computers from an external network to act like they were in the LAN?

  Read the article

• Backing up Windows 2003 Server that has Certificate Authority

  - by Dina

  I want to export and migrate a Certificate Authority CA role from a Windows 2003 machine to a new copy of Windows 2008 R2 virtual machine. I was told that I cannot have 2 CA roles on the same network at the same time. Therefore, I must first export the certificates on the older machine, delete the CA role, then add the CA role on the new machine and import the certificates into it. As a safety precaution, I am tasked to find a backup solution in case this does not work and I need to revert back to the old Windows 2003 CA. My question is: What is the best software for doing this type of backup? I am currently trying out Symantec Backup Exec 2012. Which I hope will allow me to create a backup prior to removing CA role on Windows 2003. If this CA migration fails, the backup will allow me to revert the old machine to a time before I removed its CA role.

  Read the article

• Disable NSS LDAP IPv6 (AAAA) lookups

  - by pilcrow

  Question: How can I disable inet6 AAAA queries for my LDAP server during (LDAP-backed) NSS lookups on a CentOS (RHEL) 5 machine? Background: I've servers configured to consult ldap://ldap.internal for NSS passwd and group lookups. Every relevant NSS lookup, for example the getpwuid(3) implied by an ls -l which needs to translate UIDs to network user names, performs the following DNS dance before connecting to the ldap server: AAAA? ldap.internal -> (no records) AAAA? ldap.internal.internal -> NXDomain A? ldap.internal -> 192.168.3.89 I'd like to skip the first two queries completely. Configuration: [server]$ cat /etc/redhat-release CentOS release 5.4 (Final) [server]$ grep ^passwd /etc/nsswitch.conf passwd: files ldap [server]$ grep ^uri /etc/ldap.conf uri ldap://ldap.internal/ For what it's worth, IPv6 support is otherwise disabled on these systems: [server]$ grep off /etc/modprobe.conf alias ipv6 off alias net-pf-10 off [server]$ echo "$(ip a | grep -c inet6) IPv6-enabled interfaces" 0 IPv6-enabled interfaces

  Read the article

< Previous Page | 607 608 609 610 611 612 613 614 615 616 617 618  | Next Page >