Search Results

Search found 28784 results on 1152 pages for 'start'.

Page 611/1152 | < Previous Page | 607 608 609 610 611 612 613 614 615 616 617 618  | Next Page >

• Is ceph usable with only 100Mbps bandwidth between nodes?

  - by vaab

  I haven't great hardware, but my requirements are low, I would like to start using ceph so as to abstract filesystem location and allow potential easy scaling to bigger hardware in an hypothetical future. My actual hardware meets ceph hardware requirements except the ethernet bandwidth part between the hosts. Mine is 100 Mbit/s which is much lower than the 1Gbps expected in ceph, even from the minimal requirement. Will I be able to use ceph in a very small smili-prod environnement (with limited number of clients) ? FYI: My hardware is 2 or maybe 3 hosts having each 4 core Intel, 24Go RAM, 2x2To disks but 100Mpbs between them.

  Read the article

• Can I enlarge OS C: drive of my Windows 8 PC?

  - by Sorgatz

  Last year I got a new Western Digital WD Blue 500GB HDD to replace my old drive. The first thing I did was to install latest Windows 8. While installing Windows 8 I created 3 partitions, C drive for the OS and others for storage. The OS partition is 120GB (which at the time I thought would be plenty big) but I'm now realizing its too small! I wonder if it's possible to re-size HDD partition without reformatting and re-install my Windows 8. So that is my question, Can i enlarge os c drive of my windows 8 without having to re-format? I've used the Norton Partition Magic and Disk Management to make this happen but there doesn't seem to be any options to make it happen. Thanks for any help you guys can give regarding my question. I've worked hard to optimize my current install of Windows 8 and would hate to start all over again.

  Read the article

• Why is the System process listening on Port 443?

  - by ClearsTheScreen

  I am having problems starting my apache server, because port 443 is already in use. It turns out, the system process (PID 4) uses the port 443. I don't have IIS installed, the services.msc shows (predicatbly) no Exchange server running, nor WWW-Services, nor IIS. I have no idea how to find out what service uses that port short of just disabling each service one after the other, and I am not even sure that would help. I would be grateful if someone could point me towards how I can get my SSL port back, thank you :) P.S.: Of course "just switch apache to another port for SSL" would solve the problem of not being able to start apache. But I'd still like to know what is so insistent about hogging port 443. :)

  Read the article

• Windows 7 formatting HD

  - by Rick

  I have an Acer Aspire 5610 that I am trying to put an Operating System back on. I am trying to install windows 7 32-bit and it will not go through the install. Not sure why. I am now trying to reformat the hard drive and start with a fresh formatted HD. No other partitions. The problem is that the install disk is not doing the format it is giving me an error. The error is 0x8007045d. I am at a loss. This is the first time running into this issue. Please Help.

  Read the article

• Windows 7 Enterprise, Service Pack 1. Software MS Office Excel 2010

  - by user327560

  In Excel I understand there is no mechanism to customise & re-label the Rows & Columns (i.e. Renaming Col. A to some text like "Item Number" and so on. My question is regarding if it's possible to start Row Numbering at zero, or to determine a pre-allocated number of rows which contain my Headers, and then the first Row with the detail is infact seen as Row 1? Reason for question is I work multiple INternational Projects and we use Excel to trsack alot of activities & issues. Oddly, many people will refer to, for example "Point 7"... Some people mean the ID 7 (which I have the first Column dedicated to ID Number), some mean Excel Row 7, which infact could be really ID 3, or 4 from Col. A.... Any easy way or workaround to just use the Excel Row Numbers but select from when Row 1 is counted?

  Read the article

• Eclipse shows splash screen and closes. How to fix?

  - by Bozho

  Today I restarted my machine, and Eclipse (3.5, downloaded recently) shows a strange behaviour: shows splash screen for less than a sec quits This is in 100% of the cases, so I can't start Eclipse at all. Where can I find logs about this? I deleted all eclipse resources and re-unzipped it. Same thing. I have enough memory (IntelliJ runs fine), and my anti-virus software doesn't show any activity related to closing eclipse. Any ideas what might have caused this?

  Read the article

• Slow running Ubuntu 10.10 laptop

  - by user5978

  Hello everyone. I have a slow computer. When I click on an icon say Firefox it can take 10 seconds to load. when I minimize and maximize windows you can see it happening. I get "ghost" screens where you see the window outline of the box but nothing in it or it may be white. The laptop is two years old and has these specs: Intel core two duo 2.8GHZ CPU 4GB RAM 500GB HDD 512MB Nvidia 8600GT video Realtek HD audio What is going on and where should I start looking for issues? Ubuntu 10.10 was upgraded from 10.04LTS following the instructions from the Ubuntu Wiki and it was done through the update manager GUI, not the CLI. Thanks for the help.

  Read the article

• Operating system not found after downloading skin pack

  - by 8BitSensei

  My brother has downloaded a executable file from Skin Pack — I believe it was the Mountain Lion IO6 skin pack. He's using an Acer Aspire 553G. And now his operating system won't start (Windows 7). It gets to the BIOS and then goes to load up the OS but the screen goes blank and it just goes back to the BIOS over and over again. He decided to play with the bootup settings and tried different options and got the error message "Operating System not found." Does anyone have any idea how to solve this?

  Read the article

• Open mail-links with gmail in Chrome 9

  - by moose

  it happens quite often, that I click a link over a persons name, just to see that it launches the default mail client of my system. I thought it would be a normal link, but it was a "mailto:"-link. I would like Chrome to start gmail, not my default email client. For Firefox, I had only to paste this in the URL-Bar: javascript:window.navigator.registerProtocolHandler("mailto","https://mail.google.com/mail/?extsrc=mailto&url=%s","GMail") Unfortunately, it doesn't work in Chrome 9. I have found this tutorial for Ubuntu, but I would like a solution in Chome. If it is only in Chrome, I can sync the settings. (So How do I make mailto: links open gmail in Ubuntu? doesn't fit) http://www.google.com/support/forum/p/Chrome/thread?tid=2aad08042607a4eb&hl=en could be related to my problem, but there is no answer. Gnome: $ gnome-default-applications-properties set Email-Client to gnome-open https://mail.google.com/mail/?extsrc=mailto&url=%s

  Read the article

• Installing WiFi in a church for internet access

  - by Dave Griffiths

  Hi, a colleague at work asked this question: My local church want to get WiFi enabled in the whole of their offices and main church building. The offices and main building are in the same overall structure and so the signal does not need to travel outside to any other buildings outside this main structure. Where would I start on such a project and what kind of repeaters are needed (and how are they set up) given that some of the walls are pretty thick. Do you still have one ADSL line coming in to router or are there some options of having two lines coming in so that they isn't a single point of failure. Am looking at fibre for the broadband for increased speed. Any starting pointers appreciated.

  Read the article

• wireless printer - entering WPA - is there a quicker way?

  - by camcam

  I have a wireless printer (Brother DCP-585CW). The wireless setup instruction says I should enter the WPA key to the printer. The key is entered using up and down buttons on the printer. So, I am supposed to enter 64 characters using up and down buttons. To enter 1 character, it takes on average (24+10)/2 = 17 times pressing the button (digits start after 24 letters). So 17*64 = 1088 times. Is there a quicker way to setup a wireless printer? Maybe there is a Windows program that discovers printers connected to computer through USB or Ethernet (my printer has both sockets) and allows to pre-configure it for wireless usage (enter the long WPA key)? Update There is BRAdmin program and it allows to set up almost all wireless settings... almost - all except WPA :(

  Read the article

• Can I install fresh Linux accross partitions (LUKS & LVM) and preserve/use existing home user?

  - by xtian

  With an existing LUKS encrypted logical volume partitioned hard disk dual boot to Windoz and Linux (Fedora 15), is it necessary to "start over" with the LUKS setup when upgrading the system? I recall some note about dividing the Linux installation over different partitions would help to preserve the home data in future update (I can't find this now) Before I try it, is this possible and intended use case for partitioning a Linux installation? # lsblk -fa NAME FSTYPE LABEL MOUNTPOINT sda [80G] +-sda1 [system W95 FAT 32] vfat +-sda2 ext4 /boot +-sda3 [52.4G] crypto_LUKS +-luks-de25ac97-6a32-4b79-a6a0-296a39376b3b (dm-0) LVM2_member +-cryptVG-root (dm-1) [21.5G] ext4 / +-cryptVG-swap (dm-2) [5.4MB] swap [SWAP] +-cryptVG-data (dm-3) [25.6G] ext4 /home

  Read the article

• Asus Z8NA-D6, not powering up/no signal for monitor

  - by s093294

  I have a Asus Z8NA-D6 motherboard. Been running fine so far with one E5504 Xeon processor. I have added another Xeon E5504 CPU to the second slot and it will not power up (or there is no signal to the monitor). The status lights turn on as normal. no error led. Nothing happens other then the leds start and both cpus/fans power up. HDD power up. I tried clearing CMOS. Any sugestions? http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6/#download Update. Removing ram for second cpu makes it boot atleast. itboots with memory pluged in for cpu 1. (2 4gb modules) when addin one more to the second cpu it still boots but bios only see the 2 blocks at cpu 1)

  Read the article

• Resize windows command line prompt?

  - by Yuval

  I'm working on a Windows xp machine. I wrote a program in assembly that outputs some text, and am trying to create a screenshot of the command line output (start-run-"cmd"). The problem is that the text initially printed by the program gets pushed up by later text and I cannot scroll to it. I tried playing around with the width and height under properties = layout but it seems to resize the window itself (the borders) without resizing the textarea inside the window (text does not have more "room", but the window is bigger). Does anybody know a workaround/solution for this? Thank you!

  Read the article

• Why do some actions not work with Remote Desktop?

  - by Holgerwa

  I usually connect to other PCs in the same building using Remote Desktop, which works great. For some reason, some actions cannot be performed through Remote Desktop. These are, for example: Installation of certain software Accessing the directory of a DVD (that is inserted at the remote computers drive) several other tasks that just "don't react or start", unless you do the same thing without RDP All these actions work with any other remote access tool, like VNC, Teamviewer, LogMeIn, etc. My question is: What is the difference when I use a computer through RDP instead of directly? Is there a list of prohibited actions available so that one could know upfront if something can be done with RDP or not?

  Read the article

• How can I get command prompt to merge my files in name order?

  - by Anastasia

  I'm using the copy command in command prompt to merge all the files in a directory, for a number of directories. The problem is, I need to edit the first file in each directory before I merge. This means that when I put in the command "copy /b *.mp3 name.mp3", the joined file has part 2 at the start and part 1 at the end, presumably because it was created last. Is there a way of using the copy command so that the files merge in name order? Each folder has a different number of parts, anywhere from 2 to 1000 so I don't want to list each file with a "+" in between. Ideally, I'd like to find something to insert into the copy command I'm already using. Otherwise, is there a way of rearranging the files in a folder so that if you enter "DIR", part 1 shows up first even if it was edited last? I'm using Windows 7 by the way.

  Read the article

• How to schedule a task X minutes after Windows Server 2003 starts?

  - by Joe Schmoe

  How to schedule a task X minutes after Windows Server 2003 starts? In "Scheduled Tasks" one can specify "When my computer starts" but I see no way to specify delay. What I am trying to achieve: there is a service (JIRA) that even though dependent on SQL Server service still doesn't wait long enough for SQL Server to become fully operational. So JIRA service fails to connect to the database and needs to be restarted manually after each server reboot. My plan is to add "SC stop" and "SC start" commands for JIRA service 3 minutes after server starts.

  Read the article

• Server 2003 slow share.

  - by G V

  I am running an 03 box with shares active. When uploading to the share, the speed is average. About 15-20 mbps.. But when you think about it, it is bad because it is a direct connection to a couple machines. When uploading to another server the connection speed is twice that of the direct storage. When uploading s massive folder, 250 GB, the upload will start as normal, but as it progresses it drops in speed. Now it is sitting at around 2-7 Mbps. Any ideas on how i can boost the transfer rate? On a side note, the download speed is great. It is a speed that you would expect from this setup, the main problem is uploading and what is causing the extreme slowness in speeds. Any help would be great.

  Read the article

• Resources started with slash .htaccess redirection

  - by Pawka

  I have moved old version of webpage to some subdirectory: http://www.smth.com/old/. But all resources (images, css, etc.) in HTML are linked with slash symbol at the start. So browser still tries to load them from root path. For example old/test.html contains: <img src="/images/lma_logo.ico" /> <!-- not working !--> <img src="images/lma_logo.ico" /> <!-- working !--> How can I rewrite ulrs to load resources from the "old" dir if urls still starts with "/"?

  Read the article

• Run a service after networking is ready on Ubuntu?

  - by TK Kocheran

  I'm trying to start a service that depends on networking being started, whenever the computer is rebooted. I have a few questions: Is this easily possible from an /etc/init.d script? I have tried creating a script here (conforming to the standards), but I'm really doubtful that it's even running on boot, let alone working. When I test it manually, it works. I've seen the new Upstart service, but as far as how that actually works, I'm completely in the dark. How can I make a script that runs on boot which runs after networking has been started? If I could run it after connected to wireless network, even better :)

  Read the article

• Where to run Java and PHP code continuously

  - by az1112

  I'm sorry if this is the wrong forum for a question like this, but you have to start asking questions somewhere to get anywhere :) The question is pretty simple: I need a server where I can run Java and PHP scripts 24 hours a day, 7 days a week. I need to be able to access this server via SSH, and I need to be able to retrieve the data generated by scripts using SCP. Also, I need to be able to run 10-20 scripts simultaneously. What is the name of the thing I should be looking for? Is it a dedicated server? I'm confused for 2 reasons: 1) because there seem to be all kinds of servers out there; 2) because most companies advertising dedicated servers seem to be aiming them at people who want to host websites. But I don't want to host a website; I just want to run my code.

  Read the article

• How can I get Google to re-point its search entries to new domain?

  - by poolski

  My main .com domain registration lapsed and when I went to re-register it, I found that a domain reseller service squatted it and I've lost access to it. As I wasn't terribly keen on spending money on funding scammers and the like, I registered a .co.uk domain under the same name. Is there any way of getting Google to re-point all its indexed links to the new domain? It's been indexing my blog for a couple years now and while it's not too big a deal, I'd like to not have to start all over again. Also, searching for my site results in an old entry which is currently pointing at a "Apply for a Tax Break NOW!!!" page.

  Read the article

• Where does Exchange 2010 store the STM file, does it even still use it?

  - by RichieACC

  Our domain controller died, with no hope of recovering anything. The AD backup died with it. Due to no longer having a DC, our Exchange is unable to start. I'm trying to use "Kernel for Exchange Server" to recover the mails that are in the mailbox store. I've found the .edb file, but the .stm file is nowhere on the machine. Does Exchange 2010 still use the .edb & .stm files, or is there a new store format? If not, where will the .stm file be hiding?

  Read the article

• I can not cd "LaunchAgents" on macbook

  - by why

  after installing mongdb on my macbook-pro, it tells me: If this is your first install, automatically load on login with: cp /usr/local/Cellar/mongodb/1.6.3-x86_64/org.mongodb.mongod.plist ~/Library/LaunchAgents launchctl load -w ~/Library/LaunchAgents/org.mongodb.mongod.plist If this is an upgrade and you already have the org.mongodb.mongod.plist loaded: launchctl unload -w ~/Library/LaunchAgents/org.mongodb.mongod.plist cp /usr/local/Cellar/mongodb/1.6.3-x86_64/org.mongodb.mongod.plist ~/Library/LaunchAgents launchctl load -w ~/Library/LaunchAgents/org.mongodb.mongod.plist Or start it manually: mongod run --config /usr/local/Cellar/mongodb/1.6.3-x86_64/mongod.conf but after i copy org.mongodb.mongod.plist to ~/Library/LaunchAgents, it tells me launchctl load -w ~/Library/LaunchAgents/org.mongodb.mongod.plist launchctl: Couldn't stat("/Users/liuqiang/Library/LaunchAgents/org.mongodb.mongod.plist"): Not a directory and also i can not cd "~/Library/LaunchAgents", but i can ls the directory! "~/Library/LaunchAgents" is a strange directory in mac.

  Read the article

• Ram not working in dual dynamic paging mode

  - by Robin Agrahari

  My motherboard is Intel D865GVHZ I m using 512 mb ram and recently i purchased a 512 mb ram of same company same speed(333) and same manufacturer. but my pc is not booting in dual dynamic paging mode . It is not at all booting and the screen freezes on windows logo screen at start up. i checked installing individual rams one by one and the pc is working with either of the ram installed individually. But wen i install both the pc is not working. One more point i found is my one ram has 8 chips on both sides while the other ram has 4 chips on both sides. Is that the root of the problem ?? plz help sir. in hope robin

  Read the article

< Previous Page | 607 608 609 610 611 612 613 614 615 616 617 618  | Next Page >