Search Results

Search found 24865 results on 995 pages for 'default route'.

Page 612/995 | < Previous Page | 608 609 610 611 612 613 614 615 616 617 618 619  | Next Page >

• SCSI driver installation trouble

  - by Vicky

  I tried to install the driver of Adaptec 39320A-Ultra 320 SCSI card in Win2003 Server R2 SP2 in a DELL PowerEdge 2950 Server. I selected the driver from the list of drivers present in windows. But it says that the device could not be started(Code 10). I tried to put the card in a system that already had the driver installed. It worked fine. So there is no problem with the hardware. I even tried downloading the driver from the manufacturer website. When I try to select install from path and install that driver, it tell no matching driver found. When I install the default driver from windows, it shows the card in SCSI group of device manager, but with an ! symbol. Also the device ID in driver details was different from that of the one present in other system where it insalled fine. Any suggessions to solve it?

  Read the article

• Very slow loading pages with router

  - by user984621

  I bought new router - this one: http://www.tp-link.com/en/products/details/?model=TL-WR841ND and the problem is, that the loading pages is so slow, even sometimes the pages aren't loaded at all. Is the same, when I have on the Mac OS or Windows. Below are the informations from the router-admin section: LAN IP Address: 192.168.2.1 Subnet Mask: 255.255.255.0 WAN IP Address: 192.168.1.100 Dynamic IP Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.254 DNS Server: 89.203.178.2 , 10.14.2.1 How can I fix this problem? Is almost impossible to use the internet this way.

  Read the article

• How to change password schema for Dovecot user authentication for an already existing mail server

  - by deb_lrnr

  Hello, I have an email server setup on Debian Lenny with Postfix, Dovecot, SASL and MySQL. Currently, the password scheme in my dovecot-sql.conf file is set to: CRYPT default_pass_scheme = CRYPT I would like to globally change the scheme to something stronger like SSHA, or MD5-CRYPT and re-hash all passwords with SSHA. What is the best way to do this? The Dovecot wiki mentions how passwords that don't follow the default scheme defined in dovecot-sql.conf can be prefixed with "{ssha}password", but I couldn't see anything regarding changing an already-existing scheme to a new one for all passwords that are already in the database. Thanks for your help!

  Read the article

• Why does my fan run so hard on my Dell XPS 15z?

  - by Kilhoffer

  I recently bought a Dell XPS 15z. It came with Windows 7 Home Premium, but I really wanted to try out Ubuntu on it. I ran the Windows installer and was surprised how smooth the process was. Within 10 minutes, I had a dual boot setup with Ubuntu 11.10. It boots into Ubuntu just fine and everything seems to work. I've read a lot about problems with touchpad and wireless, but honestly, I've had none of those issues. The only thing that's really bothering me is the fan constantly runs fast. Under Windows, it rarely ever came on and when it did, it wasnt spinning that fast. What could be going on under Ubuntu that would cause this? I want to get that under control because I want to use Ubuntu as my primary OS and screw Windows. Any help would be much appreciated! Note: I've read that others have set acpi=false, but I have not made any changes to the default installation. Should I make that change?

  Read the article

• SSH issues: Read from socket failed: Connection reset by peer

  - by nitins

  I compiled OpenSSH_6.6p1 on one of our server. I am able login via SSH to the upgraded server. But I am not able to connect to other servers running OpenSSH_6.6p1 or OpenSSH_5.8 from this. While connecting I am getting an error as below. Read from socket failed: Connection reset by peer On the destination server in the logs, I am seeing it as below. sshd: fatal: Read from socket failed: Connection reset by peer [preauth] I tried specifying the cipher_spec [ ssh -c aes128-ctr destination-server ] as mentioned in here and was able to connect. How can configure ssh to use the cipher by default? Why is the cipher required here?

  Read the article

• How can I copy and paste formatted text in Excel?

  - by Landy

  Before I ask question, I've searched but only found ways of copy and paste "formatted cell". That's not what I need. I want to use an example to explain my requirement: There are 2 cells in a sheet. Cell_A's text is "aaaaabbbbb", and "aaaaa" is green, and "bbbbb" is red. Cell_B's text is "ccccc" and "ccccc" is black. I want to copy and paste "bbbbb" from Cell_A to Cell_B and keep "bbbbb" in red. But in my environment(Office 2007), "bbbbb" is changed to black as "ccccc", the default format of Cell_B. Is there an easy way to implement my requirement?

  Read the article

• Loked out: Windows 8.1 administrator account disabled

  - by Gregory MOUSSAT

  I installed a Windows 8.1 laptop. By default the Administrator account is disabled. During the install process, the user created belongs to the administrators group (call it FirstUser). I installed various softwares, I created a normal account for the user (call it RealUser), and I mistakenly deleted FirstUser account (while I was connected under this account). I rebooted and... oh well, I understood the mistake. I no longer have access to any administrative privileges. The laptop is still in workgroup. I tested with Offline Windows Password & Registry Editor (latest version): activated Administrator account, and blancked its password (no option to set a new one) gave RealUser account administrative privileges After reboot, only RealUser account is still available. Once logged in, I'm unable to access anything requiring administrative provileges. Does anyone know a way to successfully activate the Administrator account, or whatever ?

  Read the article

• Error when installing ubuntu-zfs

  - by ubiquibacon

  I'm switching from FreeNAS to Ubuntu 12.04 LTS. After a vanilla install of Ubuntu has been completed I run the following commands in the order shown to install ZFS: apt-get install python-software-properties add-apt-repository ppa:zfs-native/stable apt-get -y -q update && apt-get -y -q upgrade apt-get install ubuntu-zfs When the last command is run ZFS is installed and seems to be working correctly... mostly (more on that later). However, when the last command is run I get this error (full log here): configure: error: *** Please make sure the kmod spl devel <kernel> package for your *** distribution is installed then try again. If that fails you *** can specify the location of the spl objects with the *** '--with-spl-obj=PATH' option. What is this error and how do I fix it? Now I said mostly earlier because my pool's don't auto mount when the server restarts the way they should. All my reading (mostly from this page) indicates that mountall should just take care of the mounting. I have followed the instructions on that page and I cannot get mountall to work correctly. My pools will only auto mount on restart if I edit /etc/fstab or change the ZFS_MOUNT and ZFS_UNMOUNT options in /etc/default/zfs.

  Read the article

• Why can't I reconnect to my Philips SHB9000 bluetooth headset?

  - by Thomas Eyde

  When I connected my Philips SHB9000 bluetooth to my Windows 7 (64 bit) for the very first time, it worked well. I had to manually change the default playback device, but otherwise it worked. Then, when I start up my computer from standby, it's nearly random when I can reconnect or not. My last option is to remove the bluetooth device and reconnect it. But now, even that doesn't work. The sad thing is, this used to work better on Windows 7 beta. Windows Update has a new driver which fails to install. Searching for this driver yields nothing. I thought all vendors had an official site for their drivers? Well, Philips seems to have none. If there is no answer to this problem, my advice is to NOT buy this headset. It's good looking, the sound is nice, but what need do we have from that if we can't use the bloody device?

  Read the article

• Create option to load Ubuntu or Windows 7 at start-up

  - by AXK

  We have a new Dell Optiplex 790 desktop with Windows 7 and just installed Ubuntu 12.04 on it using a USB stick that was configured as a boot drive. We created a new partition for Ubuntu during installation using the partition editor that comes up during installation. Everything seems to have gone fine with the installation except that, unexpectedly, there is no option to boot up Ubuntu when the computer is started. We just start the computer and Windows starts up with no option to ever start Ubuntu. The only way we have gotten Ubuntu to start is by putting the USB stick used for installation back into the computer and having the computer boot from it. Then GRUB shows up and the Ubuntu OS that we installed starts up (rather than the live-CD version on the USB stick). Previous times we have installed Ubuntu, GRUB shows up when we start the computer and we can choose among the various OSes installed. Can anyone suggest what to do? We want to have the option to launch either Windows 7 or Ubuntu 12.04 when we start the computer, with the default being Windows 7. Right now there is no option and Windows 7 just starts the way it did before we installed Ubuntu. Note that if we hit F1 soon after starting the computer, we get some sort of Windows bootloader (not sure of exact name) but there is no option for Ubuntu; just Windows 7. Also note that if we hit the shift key soon after starting the computer, as some help pages have suggested, nothing happens (Windows 7 is loaded as usual). Thanks in advance!

  Read the article

• Is there some way Linux editors can tell the programming language without the file extension?

  - by vfclists

  I am editing some scripts on Linux without the languages file extensions, and it seems that the editors, namely vi, nano and gedit are not applying syntax highlighting because the filenames don't use the language extensions. Is there some parameters to be passed or some setting that can enable them to recognize the language? Update: After some googling I realize that bash has that ability, at least to do some parsing or check the shebang at the top determine the language. By default Ubuntu does not install the complete vim package, so after installing it, the shell files are recognized. I don't know about nano or gedit, but vi and its graphical counterpart will do.

  Read the article

• Intel site says VT-x is supported on my CPU, but tests say otherwise

  - by Anshul

  I have a laptop with an Intel 2nd Gen. i7-2729QM (http://ark.intel.com/products/50067/) and the Intel site says that it supports VT-x, but I've downloaded the Intel Processor Identification Utility (http://www.intel.com/support/processors/tools/piu/sb/CS-014921.htm) and the test says that my CPU does not have VT-x. There is no option in my BIOS that allows me to enable/disable VT-x. I researched my laptop model (SAGER NP8170) and most forums say that it's enabled by default and there's no option in the BIOS. So assuming that's true, what gives? I also downloaded another tool called SecurAble from GRC and it also says that my CPU doesn't support VT-x. VirtualBox also says that my CPU does not support virtualization. My mind is boggled by why it says on the Intel site that my CPU supports VT-x but all other tests show otherwise. Anyone know what's going on? Thanks in advance.

  Read the article

• Changing Internet connection on ISA Server 2000

  - by garyb32234234

  Hi We are getting a new internet connection installed and will need to unplug the old one and connect this to our ISA Server 2000. Will this be a simple swap out job? We will be given a new ip, which i know i will have to enter into the external network card TCP/IP page. I will also be given the default gateway to enter. The ISP engineer said we may have to reset the ARP? cache, if we dont know how we will have to reset the ISA server? Has anyone any experience? The current connection is with the same ISP but it was owned by the business park were we are located and they linked up an ethernet port to what i assume is their own router. Hope you can help, i know that ISA 2000 is somewhat less easy to use than the newer versions.

  Read the article

• Setting up Gitosis, where to create the repos?

  - by ReynierPM

  I'm trying to setup Gitosis on CentOS 6.2 but have some doubts/problems about it. I read this docs here, here and here but it's unclear to me where to configure where repositories are created. My server has a partition /data where I create a directory and called /gitrepos. I want all the repos created under that directory. By default if I run the command: gitosis-init < /home/reynierpm/reynierpm.pub I get this Initialized empty Git repository in /root/repositories/gitosis-admin.git/ Reinitialized existing Git repository in /root/repositories/gitosis-admin.git/ And I want this repos created under /data/gitrepos, any help? Thanks in advance

  Read the article

• Environment variable for volume names in Windows?

  - by Shinrai

  I'm trying to write a batch file that will look at the volume label of the current drive and report if it's not equivalent to a certain string. Is there a default variable in the shell for this? Can I define one? Am I SOL and I'll actually have to do some (shudder) programming? EDIT: If this is possible in PowerShell that would work fine. (For the curious, we ship our machines with software cloning as a rapid bootable backup solution since most of our customers are daytraders and aren't interested in RAID due to urgency of getting-the-hell-back-to-work-right-away if there's a software corruption problem, and we want to make it immediately obvious if they're booting to the backup drive unintentionally, like say the primary failed entirely. The hope was just to write a simple batch file that would autostart on boot and throw a warning in the event of a problem.)

  Read the article

• how to debug mysql has gone?

  - by fefe

  I have a virtual machine(Ubuntu 12.04, MySQL 5.5) running under VMware and is dedicated to host a mysql server. I connect to this server on internal IP. I'm trying to find out why I get mysql server has gone error. One my windows machines apache it stops because of this issue. I have been trying to fine tune my mysql my.cnf with the following parameters but did not bring the desired result. # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 0.0.0.0 # # * Fine Tuning # wait_timeout = 180 key_buffer = 384M max_allowed_packet = 64M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 500 table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 32M how to debug this issue what is missing from configuration to avoid this error?

  Read the article

• Why does 12.04 try but fail to hibernate, even after I enabled hibernation?

  - by Roger Davis

  Regarding the below (-----) info from another post, my system will try (as is said below) to hibernate, but it won't get all the way there. Hard drive activity stops, but it does not shut down. If I turn the power off, then back on, it will start, but I have to "restore previous session" in the browser and other open apps don't restart, with the accompanying hassle. So because it tries, will the suggested fix then cause it to work correctly, or is the literal "try" not really what he means?!? PLEASE NOTE - this is a desktop system, not a laptop. Before enabling hibernation, please try to test whether it works correctly by running pm-hibernate in a terminal. The system will try to hibernate. If you are able to start the system again then you are more or less safe to add an override. To do so, start editing sudo nano /etc/polkit-1/localauthority/50-local.d/com.ubuntu.enable-hibernate.pkla Fill it with this [Re-enable hibernate by default] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes Save by pressing Ctrl-O and exit nano by pressing Ctrl-X Restart and hibernation is back!

  Read the article

• 64kb limit on the size of MSMQ Multicast Messages

  - by John Breakwell

  When Windows 2003 came out, Microsoft introduced the ability to broadcast messages to any machines that were listening back. All you had to do was send out a message on a particular port and IP address and any client that had set up a Multicast queue with matching port and IP address would get a copy. Since its introduction, there have been a couple of security vulnerabilities that needed to be removed: Microsoft Security Bulletin MS06-052 Vulnerability in Pragmatic General Multicast (PGM) Could Allow Remote Code Execution (919007) Microsoft Security Bulletin MS08-036 Vulnerabilities in Pragmatic General Multicast (PGM) could allow denial of service (950762) The second of these, MS08-036, was resolved through an undocumented change in functionality. Basically, a limit of 64kb was put on the maximum size of a message that could be broadcast using the Multicast method. Obviously this has caused a few problems for any existing MSMQ Multicast applications that expected to be able to send larger messages. A hotfix has been developed to resolve this problem. 961605 FIX: Multicast messages larger than 64 kilobytes (KB) are not delivered as expected by using Message Queuing 3.0 after security update MS08-036 is installed A registry change is required: Open the registry with Regedit Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RMCAST\Parameters\ Create a DWord called MaxpacketSize Set the value to the desired number of bytes. You can set it to a value between zero and 4MB. If you specify anything above 4MB, it will default to 64K. A reboot is needed after adding this value.

  Read the article

• Different buddy lists for different accounts in iChat

  - by Idlecool

  I have currently 4 accounts added to iChat, Standard GTalk GTalk For Google Apps Facebook Olark Facebook and Olark have their own Buddy List Group viz. Facebook and WebUser groups and thus those buddies come in a separate list, while the buddies from GTalk and GTalk from Google Apps do not have any group associated with them and they come under Buddies list. It's a bit of a pain because I want to have buddies from GTalk for Google Apps in a separate buddy list than the default one. Is it possible to do it in iChat?

  Read the article

• How to receive mail in Qmail?

  - by Ivan

  I've a server that uses Qmail. It is installed by default and it is supposed to work. I've created a new domain and new user (vadddomain + vadduser) without problems, but when I send an email from Gmail to [email protected] (the address I've created) it desappears, it is. But if connect to SMTP server directly (telnet domain.com 25) and post an email it arrives to the user queue. What's happening?!? Note: If I try to access to my user through telnet domain.com 110 it seems my pwd is not correct and it's the same I used when created the user with vadduser

  Read the article

• Bootable ISO to USB stick xp wuickest method

  - by brux

  My dog took a leak on my PC when I went out (ye funny), now it reandomly restarts - im convinced the HDD is failing because the Windows seagate diagnostic program fails on a few tests. I want to run this prior to windows in an attempt to try and recover sectors, the program includes an iso which can be written to cd and booted, but i dont have any cd's. I tried using unetbootin to create the bootable usb from the iso file (SeaToolsDOS222ALL.576.ISO) but it doesnt work. When i boot from the usb hdd unetbootin loads with "default" in the menu. No joy booting though. I checked the usb hdd in windows and all the files are there, extracted from the iso file, wont boot though. Any ideas? Im using windows xp, or

  Read the article

• Google Apps for Mail - MX entry related doubt

  - by niting

  I have signed up for google apps recently for my organisation. The google apps guide says that I need to edit the MX entry for my domain so that the mails get redirected to the google mail servers instead of my default mail server. But, I am having a doubt whether to edit the MX entry on my domain name provider or the hosting server. My domain name provider is godaddy.com and my server is ServInt. And, moreover, what difference does it make if I edit the MX entries on my hosting provider or my domain name provider. Thanks, niting

  Read the article

• Configure Git to use Beyond Compare for image diff

  - by Barney

  Because we work with a number of sprites, the kind of specialised diff views provided by Beyond Compare would be ideal to see which one of 2 versions I'm after when conflicts arise. I've already configured Git to use Beyond Compare as my primary diff and merge tool as described in their integration guide — it specifically goes into how to configure TortoiseSVN to use it for images, and I've found these articles talking about .gitattributes in general and how to script interactions from a *nix shell — but it's not obvious to me how I can use the advice provided by these guides to make a simple change that would say "use the default diff & merge bindings for files determined to be images, too". For the record, I'm doing all this on Windows :P

  Read the article

• Why does subshell not inherit exported variable (PS1)?

  - by amn

  After some debugging I finally narrowed down the problem as to why my X session xterm prompt does not appear according to my PS1 setting. If I run sh -c env, it doesn't even show PS1 in the list. Why? export PS1='test' sh -c env # No PS1 in the list, default prompt appearance (shell name + version) Substituting sh with bash yields same result, alas the behavior appears to be the same for both shells/modes. As far as I understood from man bash, the environment resulting from command run by shell with -c should include the exported variables. And it does - exporting FOOBAR results in FOOBAR listed in env run by subshell. It appears that the story is different if the variable is PS1 however. What is going on? I want my prompt propagated throughout the process tree and system. For matters sake, it is set in /etc/profile.d/user.sh (a file I created myself) with the following: PS1='\u@\H \w \$ ' export PS1 I am running Arch Linux (updated yesterday.)

  Read the article

• Set preferred language in Chrome and other Google services

  - by Super Chicken

  Whenever I'm abroad and access Google's search (via Chrome browser, on my own laptop) or other Google services, they are presented to me in the local language. How can I get Google services displayed in English and instruct Chrome to use google.com (instead of the country-specific site)? My language setting in Windows is English, so Chrome should already use this by default, and I've also set my language preference in iGoogle to English (U.S.), yet if I'm in France, for example, my searches take place on google.fr and sites like the Google News are in French. Chrome tries to be helpful by suggesting to translate these pages for me, but it would be far better to direct to the original English version of these sites in the first place. How do I fix this?

  Read the article

< Previous Page | 608 609 610 611 612 613 614 615 616 617 618 619  | Next Page >