Search Results

Search found 29619 results on 1185 pages for 'android virtual device'.

Page 613/1185 | < Previous Page | 609 610 611 612 613 614 615 616 617 618 619 620  | Next Page >

• Webcam doesn't work in Ubuntu 12.10

  - by Kzhi

  I have Gembird cam68ut. On my Ubuntu 12.10 it shows black screen in cheese and guvcview. I tested it in win7, it works fine. Here what I found: It is a uvc compliant camera, I checked on the site: 18ec:3299 USB 2.0 PC Camera (model number QC3231) ArkMicro This webcam is report by lsusb: Bus 001 Device 004: ID 18ec:3299 Arkmicro Technologies Inc. Here is the output of dmesg | tail: uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (18ec:3299) uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. input: USB2.0 PC CAMERA as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input17 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) When I run cheese (or guvcview), here what I get in terminal: libv4l2: error turning on stream: No space left on device (cheese:11797): cheese-WARNING **: Internal data flow error. I tried it on different usb slots with the same results The Webcam's microphone works, I can record audio with it Guys, any thoughts on what can be done to make it work?

  Read the article

• How do I require use of the 5 GHz band when connecting to a Wireless N access point?

  - by cqcallaw

  What is says in the topic: there's a Wireless N access point to which I'd like to connect using the 5 GHz band exclusively. How does one accomplish this? Using the directive band=a in the connection configuration file in /etc/NetworkManager/system-connections doesn't seem to affect anything (/var/log/syslog still shows attempts by wpa_supplicant to connect using the 2.4 GHz band), and running iwconfig wlan0 freq 5G per this question results in the following error: Error for wireless request "Set Frequency" (8B04) : SET failed on device wlan0 ; Invalid argument. [Edit] I'm hoping the answer won't depend on the hardware in use, but here's some information about the hardware, just in case: System is an Asus ZenBook Prime UX31A-DB51, running Ubuntu 12.04. lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:04.0 Signal processing controller: Intel Corporation Device 0153 (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 00:1f.6 Signal processing controller: Intel Corporation Panther Point Thermal Management Controller (rev 04) 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) The driver for the wireless interface is iwlwifi.

  Read the article

• What is bondib1 used for on SPARC SuperCluster with InfiniBand, Solaris 11 networking & Oracle RAC?

  - by user12620111

  A co-worker asked the following question about a SPARC SuperCluster InfiniBand network: > on the database nodes the RAC nodes communicate over the cluster_interconnect. This is the > 192.168.10.0 network on bondib0. (according to ./crs/install/crsconfig_params NETWORKS> setting) > What is bondib1 used for? Is it a HA counterpart in case bondib0 dies? This is my response: Summary: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic. Details: bondib0 is the cluster_interconnect $ oifcfg getif            bondeth0  10.129.184.0  global  public bondib0  192.168.10.0  global  cluster_interconnect ipmpapp0  192.168.30.0  global  public bondib0 and bondib1 are on 192.168.10.1 and 192.168.10.2 respectively. # ipadm show-addr | grep bondi bondib0/v4static  static   ok           192.168.10.1/24 bondib1/v4static  static   ok           192.168.10.2/24 Hostnames tied to the IPs are node1-priv1 and node1-priv2  # grep 192.168.10 /etc/hosts 192.168.10.1    node1-priv1.us.oracle.com   node1-priv1 192.168.10.2    node1-priv2.us.oracle.com   node1-priv2 For the 4 node RAC interconnect: Each node has 2 private IP address on the 192.168.10.0 network. Each IP address has an active InfiniBand link and a failover InfiniBand link. Thus, the 4 node RAC interconnect is using a total of 8 IP addresses and 16 InfiniBand links. bondib1 isn't being used for the Virtual IP (VIP): $ srvctl config vip -n node1 VIP exists: /node1-ib-vip/192.168.30.25/192.168.30.0/255.255.255.0/ipmpapp0, hosting node node1 VIP exists: /node1-vip/10.55.184.15/10.55.184.0/255.255.255.0/bondeth0, hosting node node1 bondib1 is on bondib1_0 and fails over to bondib1_1: # ipmpstat -g GROUP       GROUPNAME   STATE     FDT       INTERFACES ipmpapp0    ipmpapp0    ok        --        ipmpapp_0 (ipmpapp_1) bondeth0    bondeth0    degraded  --        net2 [net5] bondib1     bondib1     ok        --        bondib1_0 (bondib1_1) bondib0     bondib0     ok        --        bondib0_0 (bondib0_1) bondib1_0 goes over net24 # dladm show-link | grep bond LINK                CLASS     MTU    STATE    OVER bondib0_0           part      65520  up       net21 bondib0_1           part      65520  up       net22 bondib1_0           part      65520  up       net24 bondib1_1           part      65520  up       net23 net24 is IB Partition FFFF # dladm show-ib LINK         HCAGUID         PORTGUID        PORT STATE  PKEYS net24        21280001A1868A  21280001A1868C  2    up     FFFF net22        21280001CEBBDE  21280001CEBBE0  2    up     FFFF,8503 net23        21280001A1868A  21280001A1868B  1    up     FFFF,8503 net21        21280001CEBBDE  21280001CEBBDF  1    up     FFFF On Express Module 9 port 2: # dladm show-phys -L LINK              DEVICE       LOC net21             ibp4         PCI-EM1/PORT1 net22             ibp5         PCI-EM1/PORT2 net23             ibp6         PCI-EM9/PORT1 net24             ibp7         PCI-EM9/PORT2 Outbound traffic on the 192.168.10.0 network will be multiplexed between bondib0 & bondib1 # netstat -rn Routing Table: IPv4   Destination           Gateway           Flags  Ref     Use     Interface -------------------- -------------------- ----- ----- ---------- --------- 192.168.10.0         192.168.10.2         U        16    6551834 bondib1   192.168.10.0         192.168.10.1         U         9    5708924 bondib0   There is a lot more traffic on bondib0 than bondib1 # /bin/time snoop -I bondib0 -c 100 > /dev/null Using device ipnet/bondib0 (promiscuous mode) 100 packets captured real        4.3 user        0.0 sys         0.0 (100 packets in 4.3 seconds = 23.3 pkts/sec) # /bin/time snoop -I bondib1 -c 100 > /dev/null Using device ipnet/bondib1 (promiscuous mode) 100 packets captured real       13.3 user        0.0 sys         0.0 (100 packets in 13.3 seconds = 7.5 pkts/sec) Half of the packets on bondib0 are outbound (from self). The remaining packet are split evenly, from the other nodes in the cluster. # snoop -I bondib0 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib0 (promiscuous mode) 100 packets captured   49 node1-priv1.us.oracle.com   24 node2-priv1.us.oracle.com   14 node3-priv1.us.oracle.com   13 node4-priv1.us.oracle.com 100% of the packets on bondib1 are outbound (from self), but the headers in the packets indicate that they are from the IP address associated with bondib0: # snoop -I bondib1 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured  100 node1-priv1.us.oracle.com The destination of the bondib1 outbound packets are split evenly, to node3 and node 4. # snoop -I bondib1 -c 100 | awk '{print $3}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured   51 node3-priv1.us.oracle.com   49 node4-priv1.us.oracle.com Conclusion: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic.

  Read the article

• How to Use a PIN Instead of a Password in Windows 8

  - by Taylor Gibb

  Entering your full password on a touch screen device can really become a pain in the neck, luckily for us we can link a short 4 digit PIN to our user account and log in with that instead. Note: PIN codes are nowhere near as safe as using an alphanumeric password, however, they do still have a purpose when you don’t want to enter your 15 character password on a touch screen device. Creating a PIN Press the Win + I keyboard combination to bring up the Settings Charm, then click on the Change PC settings link. This will open up the Modern UI PC Settings app, where you can click on the Users section. On the right hand side you will see a Create a PIN button, click on it. Now you will need to verify that you are the owner of this user account by entering your password. Then you can choose a PIN, remember that it can only contain digits. Now when you get to the login screen you will have the option to use a PIN. How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices

  Read the article

• Unable to mount USBDRIVE Error creating moint point: Permission denied

  - by steve

  Whenever I plug a usb into my computer a window pops up and says Unable to mount [Name of USB] Error creating moint point: Permission denied steve@goliath:/$ uname -a Linux goliath 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux steve@goliath:/$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f716ee1 Device Boot Start End Blocks Id System /dev/sda1 1 234441647 117220823+ ee GPT WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f710ee1 Device Boot Start End Blocks Id System /dev/sdb1 1 2930277167 1465138583+ ee GPT Disk /dev/sdc: 16.0 GB, 16005464064 bytes 74 heads, 10 sectors/track, 42244 cylinders, total 31260672 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 31260671 15626304 c W95 FAT32 (LBA) steve@goliath:/$ sudo mkdir /media/external mkdir: cannot create directory `/media/external': Permission denied steve@goliath:/$ sudo mkdir /media/usb0 mkdir: cannot create directory `/media/usb0': Permission denied steve@goliath:/$ sudo ls -l / | grep media drwxr-xr-x 3 root root 4096 Oct 3 22:48 media steve@goliath:/$ ls /media/ -a . .. MediaShare MediaShare is the the directory on my server that has all my movies and music. If there is any information I left out please let me know.

  Read the article

• Happy Day! VS2010 SP1, Project Server Integration, Load Test Feature Pack

  - by Aaron Kowall

  Microsoft released a PILE of Visual Studio goodness today: Visual Studio 2010 SP1(Including TFS SP1) Finally done with remembering which GDR packs, KB Patches, etc need to be installed with a new VS/TFS 2010 deployment.  Just grab the SP1.  It’s available today for MSDN Subscribers and March 10th for public download. TFS-Project Server Integration Feature Pack MSDN Subscribers got another little treat today with the TFS-Project Server integration feature pack.  We can now get project rollups and portfolio level management with Project Server yet still have the tight developer interaction with TFS.  Finally we can make the PMO happy without duplicate entry or MS Project gymnastics. Visual Studio Load Test Feature Pack This is a new benefit for Visual Studio 2010 Ultimate subscribers.  Previously there was a limit to Ultimate Load Testing of 250 virtual users. If you needed more, you had to buy virtual user license packs.  No more.  Now your Visual Studio Ultimate license allows you to simulate as many virtual users as you need!!  This is HUGE in improving adoption of regular load testing for development projects. All the Details are available from Soma’s blog. Technorati Tags: VS2010,TFS,Load Test

  Read the article

• Switching DVI socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Configuration Tips for better Performance with ADF Mobile Apps

  - by SRINI INDLA

  Some tips to keep in mind to make sure ADF Mobile application's performance is optimal: 1. Select release mode in deployment profile. This is perhaps the most important thing to remember to ensure best performance for ADF Mobile Apps. Selecting this option causes the deployer to package optimized JVM and minified JS libs with the mobile app there by significantly improving the over all performance of the application. 2. For iOS you do not need to do anything else other than selecting  release mode in deploy profile. However, on Android you have to create a keystore and configure it in JDev --> Tools --> Preferences --> ADF Mobile --> Platforms : Android as shown in the snapshot below 3. Steps for generating the Keystore for Android using keytool :  4. Logging level setting in logging.properties: Make sure the log level is set to SEVERE for both framework logger as well as the application logger as follows oracle.adfmf.framework.level=SEVERE oracle.adfmf.application.level=SEVERE 5. When using SOAP WebServices with WebService Data Control make sure you select the option to copy the WSDL. This will cause the JDev to download the WSDL and all the XSDs referenced by the WSDL from the server at design time and package them with the application during deployment. This way the application does not incur the cost of downloading these resources at run time from the device.

  Read the article

• Wirelessly Sync Photos From iPhone To Computer Using CameraSync

  - by Gopinath

  How do you upload photos captured on your iOS device to your computer? By connecting the device using a cable and then syncing up with an app?? Ah..is’nt it a boring way. Here comes CameraSync – an app that lets you wirelessly send your iOS device photos to DropBox, so that you can access on your computer irrespective of the platform (Windows, Mac, Linux). By the way, this app works in the background and syncs the  files without disturbing  you. You don’t like DropBox? CameraSync works with a variety  of cloud services : Flickr, Amazon S3, iDisk, FTP and Box.net. If you looking for a step by step guide on how to setup CameraSync for DropBox then check this post. CameraSync cost $1.99 and runs on iOS4.0+ devices. CameraSync [iTunes App via Lifehacker] This article titled,Wirelessly Sync Photos From iPhone To Computer Using CameraSync, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Exalogic Elastic Cloud Software (EECS) version 2.0.1 available

  - by JuergenKress

  We are pleased to announce that as of today (May 14, 2012) the Exalogic Elastic Cloud Software (EECS) version 2.0.1 has been made Generally Available. This release is the culmination of over two and a half years of engineering effort from an extended team spanning 18 product development organizations on three continents, and is the most powerful, sophisticated and comprehensive Exalogic Elastic Cloud Software release to date. With this new EECS release, Exalogic customers now have an ideal platform for not only high-performance and mission critical applications, but for standardization and consolidation of virtually all Oracle Fusion Middleware, Fusion Applications, Application Unlimited and Oracle GBU Applications. With the release of EECS 2.0.1, Exalogic is now capable of hosting multiple concurrent tenants, business applications and middleware deployments with fine-grained resource management, enterprise-grade security, unmatched manageability and extreme performance in a fully virtualized environment. The Exalogic Elastic Cloud Software 2.0.1 release brings important new technologies to the Exalogic platform: Exalogic is now capable of hosting multiple concurrent tenants, business applications and middleware deployments with fine-grained resource management, enterprise-grade security, unmatched manageabi! lity and extreme performance in a fully virtualized environment. Support for extremely high-performance x86 server virtualization via a highly optimized version of Oracle VM 3.x. A rich, fully integrated Infrastructure-as-a-Service management system called Exalogic Control which provides graphical, command line and Java interfaces that allows Cloud Users, or external systems, to create and manage users, virtual servers, virtual storage and virtual network resources. Webcast Series: Rethink Your Business Application Deployment Strategy Redefining the CRM and E-Commerce Experience with Oracle Exalogic, 7-Jun@10am PT & On-Demand: ‘The Road to a Cloud-Enabled, Infinitely Elastic Application Infrastructure’ (featuring Gartner Analysts). WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: ExaLogic Elastic Cloud,ExaLogic,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress,ExaLogic 2.0.1

  Read the article

• C++: calling non-member functions with the same syntax of member ones

  - by peoro

  One thing I'd like to do in C++ is to call non-member functions with the same syntax you call member functions: class A { }; void f( A & this ) { /* ... */ } // ... A a; a.f(); // this is the same as f(a); Of course this could only work as long as f is not virtual (since it cannot appear in A's virtual table. f doesn't need to access A's non-public members. f doesn't conflict with a function declared in A (A::f). I'd like such a syntax because in my opinion it would be quite comfortable and would push good habits: calling str.strip() on a std::string (where strip is a function defined by the user) would sound a lot better than calling strip( str );. most of the times (always?) classes provide some member functions which don't require to be member (ie: are not virtual and don't use non-public members). This breaks encapsulation, but is the most practical thing to do (due to point 1). My question here is: what do you think of such feature? Do you think it would be something nice, or something that would introduce more issues than the ones it aims to solve? Could it make sense to propose such a feature to the next standard (the one after C++0x)? Of course this is just a brief description of this idea; it is not complete; we'd probably need to explicitly mark a function with a special keyword to let it work like this and many other stuff.

  Read the article

• How to connect MTS MBlaze on ubuntu 11.04

  - by murali_ma

  i have installed ubuntu 11.04 inside the windows xp. i have MTS Mblaze USB Modem. (my service provider is MTS MBlaze,india) i want to use Mblaze into ubuntu so that i did the following steps for make connecting the device. from the task bar->edit connections->mobile broadband->choose country->mts mblaze and ok i give username and password ([email protected] and password MTS. ok now i enable mobile broadband , MTS MBlaze connection1(connection name) from task bar. steps followed from "http://randomshandom.wordpress.com/2010/12/20/how-to-connect-mts-mblaze-device-in-ubuntu-10-10-11-04/#more-3" for the first time it successfully connected and browse the internet. after i restart the system i connect it. it does not connected. it shows Modem network disconnected. i accessed many times and delete the connection and recreated but i does not help me. if i try to connect device i think it the search the network, i saw the wave signal. img Image for showing problem:

  Read the article

• How do you setup Postfix/Dovecot/MySQL to not look for local accounts?

  - by thiesdiggity

  I am having an issue with one of my Postfix/Dovecot mail servers and I'm unsure how to fix the problem. I will try to explain it in detail, here it goes: I have an Ubuntu server setup using Virtual hosting with Postfix, Dovecot and MySQL. We have one domain setup as a virtual domain, for this example I am going to use mail.example.com. Under that domain we have one email address. I have another server (MS Exchange) setup using another one of my sub-domains, ex.example.com. The problem is that when I SMTP into the account on mail.example.com and try to send an email to an account on ex.example.com, I get the email returned back to us with an "unknown host" error. Now, I know that the mail.example.com server can resolve the ex.example.com domain because I can ping/dig while SSH'd into it. I can also log into Postfix via Telnet and send an email to an ex.example.com mailbox. I'm guessing that it has something to do with Postfix/Dovecot looking locally for the domain in the virtual domain list because of the tld domain (example.com)? If that's the case, how do I get Postfix/Dovecot to only look locally for the entire URL (mail.example.com) and if it doesn't find it, send it to the correct server by looking up the MX/A records (which I know exist and are setup correctly)? I have been working on this all day and any guidance would be GREATLY appreciated! Thanks for your time!

  Read the article

• Copy to USB memory stick really slow?

  - by Eloff

  When I copy files to the USB device, it takes much longer than in windows (same usb device, same port) it's faster than USB 1.0 speeds (1MB/s) but much slower than USB 2.0 speeds (12MB/s). To copy 1.8GB takes me over 10 minutes (it should be < 3 min.) I have two identical SanDisk Cruzer 8GB sticks, and I have the same problem with both. I have a super talent 32GB USB SSD in the neighboring port and it works at expected speeds. The problem I seem to see in the GUI is that the progress bar goes to 90% almost instantly, completes to 100% a little slower and then hangs there for 10 minutes. Interrupting the copy at this point seems to result in corruption at the tail end of the file. If I wait for it to complete the copy is successful. Any ideas? dmesg output below: [64059.432309] usb 2-1.2: new high-speed USB device number 5 using ehci_hcd [64059.526419] scsi8 : usb-storage 2-1.2:1.0 [64060.529071] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 1.14 PQ: 0 ANSI: 2 [64060.530834] sd 8:0:0:0: Attached scsi generic sg4 type 0 [64060.531925] sd 8:0:0:0: [sdd] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB) [64060.533419] sd 8:0:0:0: [sdd] Write Protect is off [64060.533428] sd 8:0:0:0: [sdd] Mode Sense: 03 00 00 00 [64060.534319] sd 8:0:0:0: [sdd] No Caching mode page present [64060.534327] sd 8:0:0:0: [sdd] Assuming drive cache: write through [64060.537988] sd 8:0:0:0: [sdd] No Caching mode page present [64060.537995] sd 8:0:0:0: [sdd] Assuming drive cache: write through [64060.541290] sdd: sdd1 [64060.544617] sd 8:0:0:0: [sdd] No Caching mode page present [64060.544619] sd 8:0:0:0: [sdd] Assuming drive cache: write through [64060.544621] sd 8:0:0:0: [sdd] Attached SCSI removable disk

  Read the article

• Software development company business plan

  - by Navi

  I apologize in advance if this is the wrong forum for this question, so please forward me to the right place. I have about 10 years professional experience as software developer. Mostly on the Java platform doing server side programs. I have picked up a bit of Linux skills on the way as well. I know HTML and Javascript, so I can make a website that would not be too ugly, but I am not going to win any prizes with it. In fact I think I am pretty terrible in the user interface department. My initial plan is to do Android development. I read a few Android books and tried making a few apps. Since it is Java based I think I got the technical side down. Lately I have been thinking about iphone and Mac development, because of the relevant app store/development programs. The trouble is I don't know Objective C. As a side question, how long would it take me to become proficient in Objective C? Considering that I am working on my own and could hire somebody to help me for a short time for low wages if necessary what are my options? What are the pro and cons of the development programs app stores of Android and Apple? Which development/app stores are out there beside the ones I mentioned? Do you think it is necessary to find funds to get me started or should I just use my savings? If you have positive/negative experiences in a similar situations can you please share them? Thanks for your help.

  Read the article

• In virtualbox, I can't access the dvd drive to install a guest host

  - by user211062

  I have installed a fresh copy of Ubuntu Server 12.04 and VirtualBox 4.3. I have set up a VM called "MediaServer" and tried to start it. I then get the following error: Cannot open host device '/dev/sr0' for readonly access. Check the permissions of that device ('/bin/ls -l /dev/sr0'): Most probably you need to be member of the device group. Make sure that you logout/login after changing the group settings of the current user (VERR_ACCESS_DENIED) I have looked all over the Internet and have been unable to find a solution. Using Webmin, I tried changing the group settings so that my user name was in the "vboxusers" group, but that did not work either. I tried various other changes in group settings and none of them worked. Also, I tried rebooting the server after the changes and that didn't work either. I have been following a guide on how to set up an Ubuntu server from the website "linuxhomeserverguide.com" and when it came to the section where you could finally set up your first virtual machine, I am stumped. I would really appreciate it if someone could help me. Thanks in advance.

  Read the article

• Pros and Cons of Facebook's React vs. Web Components (Polymer)

  - by CletusW

  What are the main benefits of Facebook's React over the upcoming Web Components spec and vice versa (or perhaps a more apples-to-apples comparison would be to Google's Polymer library)? According to this JSConf EU talk and the React homepage, the main benefits of React are: Decoupling and increased cohesion using a component model Abstraction, Composition and Expressivity Virtual DOM & Synthetic events (which basically means they completely re-implemented the DOM and its event system) Enables modern HTML5 event stuff on IE 8 Server-side rendering Testability Bindings to SVG, VML, and <canvas> Almost everything mentioned is being integrated into browsers natively through Web Components except this virtual DOM concept (obviously). I can see how the virtual DOM and synthetic events can be beneficial today to support old browsers, but isn't throwing away a huge chunk of native browser code kind of like shooting yourself in the foot in the long term? As far as modern browsers are concerned, isn't that a lot of unnecessary overhead/reinventing of the wheel? Here are some things I think React is missing that Web Components will care of. Correct me if I'm wrong. Native browser support (read "guaranteed to be faster") Write script in a scripting language, write styles in a styling language, write markup in a markup language. Style encapsulation using Shadow DOM React instead has this, which requires writing CSS in JavaScript. Not pretty. Two-way binding

  Read the article

• Cities from Space: A Tour of Urban Planning Patterns

  - by Jason Fitzpatrick

  While many cities developed haphazardly and organically with little structured planning, other cities were developed following strict organization–organization that reveals itself beautifully when seen from space. Wired magazine shares a roundup of ten well-planned cities viewed with a satellite’s eye. Among the roundup our favorite is the oldest, seen in the photo above: This nine-pointed fortress is perhaps the best example of a planned city from the Renaissance. Palmanova was built in 1593 and is located in the northeastern corner of Italy near the border with Slovenia. It was intended to be home to a completely self-reliant utopian community that could also defend itself against the Ottomans. It had three guarded entrances, ramparts between each of the star points and eventually a moat. Sadly, nobody was willing to move there. Eventually it was used as free housing for pardoned criminals. Today it is a national monument, a tourist destination and home to around 5,000 people. Hit up the link below to check out the other nine well-planned entries in the roundup. How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices

  Read the article

• Xorg crashes ever since using Nvidia dual monitors

  - by legion

  Well ever since I have used dual monitors with the NVIDIA X Server Settings program my xorg process has been crashing after a while, and its generally a pretty long while of like 6 hours afterwards. Before NVIDIA changed my xorg.conf file I only had xorg crash like twice in 2 months, I can't figure out what is going on. I am running ubuntu 12.04 with the MATE desktop environment v 1.2.0 xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LEN" HorizSync 51.8 - 55.8 VertRefresh 40.0 - 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "NVS 3100M" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-1: nvidia-auto-select +0+0, CRT: nvidia-auto-select +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinViewXineramaInfoOrder" "DFP-1" Option "TwinView" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Plugged in, not charging&ndash;Windows 7

  - by Kelly Jones

  Just a quick post on something I ran into lately with my Dell Precision M4500 laptop (monster laptop!).  I noticed the little icon in the system tray for the power options was stating that it was “plugged in, not charging”.  I don’t know why it was stating this, but I quickly found a fix for it on the net. I found the fix in this forum on CNET.  Here’s the fix: In order to correct problems with the battery's power management software, follow the steps below. 1. Click Start and type device in the search field, then select Device Manager . 2. Expand the Batteries category. 3. Under the Batteries category, right-click the Microsoft ACPI Compliant Control Method Battery listing, and select Uninstall . WARNING: Do not remove the Microsoft AC Adapter driver or any other ACPI compliant driver. 4. On the Device Manager taskbar, click Scan for hardware changes . Alternately, select Action > Scan for hardware changes . Windows will scan your computer for hardware that doesn't have drivers installed, and will install the drivers needed to manage your battery's power. The notebook should now indicate that the battery is charging.   And it did work.

  Read the article

• AppleTV - itunes store is temporarily unavailable - please check back later

  - by Ken

  When attempting to rent a movie on ATV, my wife received the error message above.  Alternately “server unavailable”.  When your wife is sick, the amount of IT support she needs goes up exponentially.  One piece of the puzzle was that she had changed her Apple ID password.  On her PC I ran iTunes and under account, there was only 1 device listed (not the ATV).  Even when signed out/back-in on the ATV under Settings>iTunes it still gave same error message.  What I suspect is it thinks she is trying to authorize the device to another Apple ID.  Some new 90 day rule limits when a device can be associated with another Apple ID.  Your iTunes store/account will show devices, and how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer.  Apple must have no freaking idea why someone would want to know which ID is associated to the ATV (i.e. the vice versa), because it can’t be done. Solution: Try ATV settings>reset I swapped out ATV 1 for ATV 2 (used for music streaming downstairs).  I know it’s a cop-out solution, but remember I had a sick wife breathing down my neck.

  Read the article

• How to host an AP or a hotspot?

  - by user1048138

  I'm running Ubuntu 12.04 as a virtual machine on my Mac. Since I am unable to get the virtual machine to have full access to my WiFi card, I bought another USB WiFi card to use. This is my WiFi card. If you are unfamiliar with Virtual machine, as far as I know, since the Ubuntu has its own card now, it shouldn't matter. I have followed these guides with no luck: https://help.ubuntu.com/community/WifiDocs/WirelessAccessPoint http://www.danbishop.org/2011/12/11/using-hostapd-to-add-wireless-access-point-capabilities-to-an-ubuntu-server/ The problem is that the WiFi connection appears on all of the machines that I have in my house: 2 iPhones, Dell machine running Ubuntu and two Macbooks. However the connection times out on all of these machines. Questions: Could this be a driver issue if that same WiFi card can connect to other WiFi points and use its internet Could this be DHCP related? I would think not. It should at least get a 169.X.X.X address? No? Any solutions for me?

  Read the article

• How do I drag my widgets without dragging other widgets?

  - by Cypher

  I have a bunch of drag-able widgets on screen. When I am dragging one of the widgets around, if I drag the mouse over another widget, that widget then gets "snagged" and is also dragged around. While this is kind of a neat thing and I can think of a few game ideas based on that alone, that was not intended. :-P Background Info I have a Widget class that is the basis for my user interface controls. It has a bunch of properties that define it's size, position, image information, etc. It also defines some events, OnMouseOver, OnMouseOut, OnMouseClick, etc. All of the event handler functions are virtual, so that child objects can override them and make use of their implementation without duplicating code. Widgets are not aware of each other. They cannot tell each other, "Hey, I'm dragging so bugger off!" Source Code Here's where the widget gets updated (every frame): public virtual void Update( MouseComponent mouse, KeyboardComponent keyboard ) { // update position if the widget is being dragged if ( this.IsDragging ) { this.Left -= (int)( mouse.LastPosition.X - mouse.Position.X ); this.Top -= (int)( mouse.LastPosition.Y - mouse.Position.Y ); } ... // define and throw other events if ( !this.WasMouseOver && this.IsMouseOver && mouse.IsButtonDown( MouseButton.Left ) ) { this.IsMouseDown = true; this.MouseDown( mouse, new EventArgs() ); } ... // define and throw other events } And here's the OnMouseDown event where the IsDraggable property gets set: public virtual void OnMouseDown( object sender, EventArgs args ) { if ( this.IsDraggable ) { this.IsDragging = true; } } Problem Looking at the source code, it's obvious why this is happening. The OnMouseDown event gets fired whenever the mouse is hovered over the Widget and when the left mouse button is "down" (but not necessarily in that order!). That means that even if I hold the mouse down somewhere else on screen, and simply move it over anything that IsDraggable, it will "hook" onto the mouse and go for a ride. So, now that it's obvious that I'm Doing It Wrong™, how do I do this correctly?

  Read the article

• Win7 no longer available after installing 12.04

  - by Michael

  I have installed Ubuntu 12.04 but my Windows 7 partition seems to have been lost. It is in sda2. Can anyone help me how to get this Windows 7 partition back without having to reinstall Windows 7? Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd45cd45c Device Boot Start End Blocks Id System /dev/sda1 2048 61433855 30715904 83 Linux /dev/sda2 * 61433856 122873855 30720000 7 HPFS/NTFS/exFAT /dev/sda3 122873856 976769023 426947584 7 HPFS/NTFS/exFAT Disk /dev/sdb: 203.9 GB, 203928109056 bytes 255 heads, 63 sectors/track, 24792 cylinders, total 398297088 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x03ee03ee Device Boot Start End Blocks Id System /dev/sdb1 * 63 20482874 10241406 c W95 FAT32 (LBA) /dev/sdb2 20482875 40965749 10241437+ 1c Hidden W95 FAT32 (LBA) /dev/sdb3 40965750 398283479 178658865 f W95 Ext'd (LBA) /dev/sdb5 40965813 76694309 17864248+ 7 HPFS/NTFS/exFAT /dev/sdb6 76694373 108856439 16081033+ 7 HPFS/NTFS/exFAT /dev/sdb7 108856503 398283479 144713488+ 7 HPFS/NTFS/exFAT Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 240 heads, 63 sectors/track, 129201 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000001 Device Boot Start End Blocks Id System /dev/sdc1 * 63 20480543 10240240+ 82 Linux swap / Solaris /dev/sdc2 20480605 1953519119 966519257+ f W95 Ext'd (LBA) /dev/sdc5 20480607 1953519119 966519256+ 7 HPFS/NTFS/exFAT

  Read the article

• Modular Architecture for Processing Pipeline

  - by anjruu

  I am trying to design the architecture of a system that I will be implementing in C++, and I was wondering if people could think of a good approach, or critique the approach that I have designed so far. First of all, the general problem is an image processing pipeline. It contains several stages, and the goal is to design a highly modular solution, so that any of the stages can be easily swapped out and replaced with a piece of custom code (so that the user can have a speed increase if s/he knows that a certain stage is constrained in a certain way in his or her problem). The current thinking is something like this: struct output; /*Contains the output values from the pipeline.*/ class input_routines{ public: virtual foo stage1(...){...} virtual bar stage2(...){...} virtual qux stage3(...){...} ... } output pipeline(input_routines stages); This would allow people to subclass input_routines and override whichever stage they wanted. That said, I've worked in systems like this before, and I find the subclassing and the default stuff tends to get messy, and can be difficult to use, so I'm not giddy about writing one myself. I was also thinking about a more STLish approach, where the different stages (there are 6 or 7) would be defaulted template parameters. Can anyone offer a critique of the pattern above, thoughts on the template approach, or any other architecture that comes to mind?

  Read the article

< Previous Page | 609 610 611 612 613 614 615 616 617 618 619 620  | Next Page >