Search Results

Search found 37415 results on 1497 pages for 'attribute id'.

Page 614/1497 | < Previous Page | 610 611 612 613 614 615 616 617 618 619 620 621  | Next Page >

• wifi not working hp dv4

  - by Blaze

  i get this output for sudo lshw -C network : *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 06 serial: 3c:4a:92:cd:63:98 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:3000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network DISABLED description: Wireless interface product: RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip] vendor: Ralink corp. physical id: 0 bus info: pci@0000:0a:00.0 logical name: wlan0 version: 00 serial: 90:00:4e:82:3c:5b width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.0.0-17-generic-pae firmware=0.34 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c2500000-c250ffff i cant enable the wifi using the fn+f12 key.. its just stuck. In windows 7 it gets enabled when i press the same keys. but this happens after it gets booted up... i just want to use the wifi in anyway possible. can anybody help?

  Read the article

• redirect an old URL using web.config

  - by Dog

  i'm still very new to using URL rewrites and redirects and i'm having some problems on something i thought was quite simple... i've just rebuilt a website and want to redirect the old URLs to the new ones... for example : http://www.mydomain.com/about.asp?lang=1 should now be http://www.mydomain.com/content.asp?id=100230&title=about&langid=1 unfortunately, everything i've tried is giving me errors or simply does nothing. here is one rule i tried : <rule name="redirectoldabout" enabled="true" stopProcessing="true"> <match url="( .*)" negate="true" /> <conditions> <add input="{HTTP_HOST}" pattern="^mydomain\.com/about\.asp\?lang=1$" /> </conditions> <action type="Redirect" url="http://www.mydomain.com/content.asp?id=100230&title=about&langid=1" redirectType="Permanent" /> but i get an error back : HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. any suggestions as to what i'm doing wrong? thanks dog

  Read the article

• Oracle Flashback Technology - Webcast 9th June 2010

  - by Alex Blyth

  Hi All Here are the details for webcast on Oracle Flashback Technologies on Wednesday (9th June 2010) beginning at 1.30pm (Sydney, Australia Time). The Oracle Database architecture leverages the unique technological advances in the area of database recovery due to human errors. Oracle Flashback Technology provides a set of new features to view and rewind data back and forth in time. The Flashback features offer the capability to query historical data, perform change analysis, and perform self-service repair to recover from logical corruptions while the database is online. With Oracle Flashback Technology, you can indeed undo the past! Oracle9i introduced Flashback Query to provide a simple, powerful and completely non-disruptive mechanism for recovering from human errors. It allows users to view the state of data at a point in time in the past without requiring any structural changes to the database. Oracle Database 10g extended the Flashback Technology to provide fast and easy recovery at the database, table, row, and transaction level. Flashback Technology revolutionizes recovery by operating just on the changed data. The time it takes to recover the error is now equal to the same amount of time it took to make the mistake. Oracle 10g Flashback Technologies includes Flashback Database, Flashback Table, Flashback Drop, Flashback Versions Query, and Flashback Transaction Query. Flashback technology can just as easily be utilized for non-repair purposes, such as historical auditing with Flashback Query and undoing test changes with Flashback Database. Oracle Database 11g introduces an innovative method to manage and query long-term historical data with Flashback Data Archive. This release also provides an easy, one-step transaction backout operation, with the new Flashback Transaction capability. Webcast is at http://strtc.oracle.com (IE6, 7 & 8 supported only)Conference ID for the webcast is 6690835Conference Key: flashbackEnrollment is required. Please click here to enroll.Please use your real name in the name field (just makes it easier for us to help you out if we can't answer your questions on the call) Audio details: NZ Toll Free - 0800 888 157 orAU Toll Free - 1800420354 (or +61 2 8064 0613)Meeting ID: 7914841Meeting Passcode: 09062010 Talk to you all Wednesday 9th June Alex

  Read the article

• how to generate random bubbles from array of sprites in cocos2d?

  - by prakash s

  I am devoloping the bubble shooter game in cocos2d how to generate random bubbles from array of sprites here is my code (void)addTarget { CGSize winSize = [[CCDirector sharedDirector] winSize]; //CCSprite *target = [CCSprite spriteWithFile:@"3.png" rect:CGRectMake(0, 0, 256, 256)]; NSMutableArray * movableSprites = [[NSMutableArray alloc] init]; NSArray *images = [NSArray arrayWithObjects:@"1.png", @"2.png", @"3.png", @"4.png",@"5.png",@"1.png",@"5.png", @"3.png", nil]; for(int i = 0; i < images.count; ++i) { NSString *image = [images objectAtIndex:i]; // generate random number based on size of array (array size is larger than 10) CCSprite*target = [CCSprite spriteWithFile:image]; float offsetFraction = ((float)(i+1))/(images.count+1); target.position = ccp(winSize.width*offsetFraction, winSize.height/2); target.position = ccp(350*offsetFraction, 460); [self addChild:target]; [movableSprites addObject:target]; //[target runAction:]; id actionMove = [CCMoveTo actionWithDuration:10 position:ccp(winSize.width/2,winSize. height/2)]; This code generating bubbles with *.png colour bubbles but i want to generate randomly because for shooting the bubbles by shooter class help me please id actionMoveDone = [CCCallFuncN actionWithTarget:self selector:@selector(spriteMoveFinished:)]; [target runAction:[CCSequence actions:actionMove, actionMoveDone, nil]]; } }

  Read the article

• Passing javascript array of objects to WebService

  - by Yousef_Jadallah

  Hi folks. In the topic I will illustrate how to pass array of objects to WebService and how to deal with it in your WebService.   Suppose we have this javascript code :   <script language="javascript" type="text/javascript"> var people = new Array(); function person(playerID, playerName, playerPPD) { this.PlayerID = playerID; this.PlayerName = playerName; this.PlayerPPD = parseFloat(playerPPD); } function saveSignup() { addSomeSampleInfo(); WebService.SaveSignups(people, SucceededCallback); } function SucceededCallback(result, eventArgs) { var RsltElem = document.getElementById("divStatusMessage"); RsltElem.innerHTML = result; } function OnError(error) { alert("Service Error: " + error.get_message()); } function addSomeSampleInfo() { people = new Array(); people[people.length++] = new person(123, "Person 1 Name", 10); people[people.length++] = new person(234, "Person 2 Name", 20); people[people.length++] = new person(345, "Person 3 Name", 10.5); } </script> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } poeple :is the array that we want to send to the WebService. person :The function –constructor- that we are using to create object to our array. SucceededCallback : This is the callback function invoked if the Web service succeeded. OnError : this is the Error callback function so any errors that occur when the Web Service is called will trigger this function. saveSignup : This function used to call the WebSercie Method (SaveSignups), the first parameter that we pass to the WebService and the second is the name of the callback function.   Here is the body of the Page : <body> <form id="form1" runat="server"> <asp:ScriptManager ID="ScriptManager1" runat="server"> <Services> <asp:ServiceReference Path="WebService.asmx" /> </Services> </asp:ScriptManager> <input type="button" id="btn1" onclick="saveSignup()" value="Click" /> <div id="divStatusMessage"> </div> </form> </body> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }     Then main thing is the ServiceReference and it’s path "WebService.asmx” , this is the Web Service that we are using in this example.     A web service will be used to receive the javascript array and handle it in our code : using System; using System.Web; using System.Web.Services; using System.Xml; using System.Web.Services.Protocols; using System.Web.Script.Services; using System.Data.SqlClient; using System.Collections.Generic; [WebService(Namespace = "http://tempuri.org/")] [WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)] [ScriptService] public class WebService : System.Web.Services.WebService { [WebMethod] public string SaveSignups(object [] values) { string strOutput=""; string PlayerID="", PlayerName="", PlayerPPD=""; foreach (object value in values) { Dictionary<string, object> dicValues = new Dictionary<string, object>(); dicValues = (Dictionary<string, object>)value; PlayerID = dicValues["PlayerID"].ToString(); PlayerName = dicValues["PlayerName"].ToString(); PlayerPPD = dicValues["PlayerPPD"].ToString(); strOutput += "PlayerID = " + PlayerID + ", PlayerName=" + PlayerName + ",PlayerPPD= " + PlayerPPD +"<br>"; } return strOutput; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The first thing I implement System.Collections.Generic Namespace, we need it to use the Dictionary Class. you can find in this code that I pass the javascript objects to array of object called values, then we need to deal with every separate Object and explicit it to Dictionary<string, object> . The Dictionary Represents a collection of keys and values Dictionary<TKey, TValue> TKey : The type of the keys in the dictionary TValue : The type of the values in the dictionary. For more information about Dictionary check this link : http://msdn.microsoft.com/en-us/library/xfhwa508(VS.80).aspx   Now we can get the value for every element because we have mapping from a set of keys to a set of values, the keys of this example is :  PlayerID ,PlayerName,PlayerPPD, this created from the original object person.    Ultimately,this Web method return the values as string, but the main idea of this method to show you how to deal with array of object and convert it to  Dictionary<string, object> object , and get the values of this Dictionary.   Hope this helps,

  Read the article

• RESTFul: state changing actions

  - by Miro Svrtan

  I'am planning to build RESTfull API but there are some architectural questions that are creating some problems in my head. Adding backend bussiness logic to clients is option that I would like to avoid since updating multiple client platforms is hard to maintain in real time when bussiness logic can rapidly change. Lets say we have article as a resource ( api/article ), how should we implement actions like publish, unpublish,activate or deactivate and so on but to try to keep it as simple as possible? 1) Should we use api/article/{id}/{action} since a lot of backend logic can happen there like pushing to remote locations or change of multiple properties. Probably the hardest thing here is that we need to send all article data back to API for updating and multiuser work could not be implemented. For instance editor could send 5 seconds older data and overwrite fix that some other journalist just did 2 seconds ago and there is no way that I could explain to clients this since those publishing an article is really not in any way connected to updating the content. 2) Creating new resource can also be an option, api/article-{action}/id , but then returned resource would not be article-{action} but article which I'am not sure if this is proper. Also in server side code article class is handling actuall work on both resource and I'm not sure if this goes against RESTfull thinking Any suggestions are welcomed..

  Read the article

• Can't access external hard drives or thumb drives

  - by calden

  I am not a complete linux noob but I don't know a lot either and would greatly appreciate some help with this. I just installed Ubuntu 10.10 onto my laptop. Everything is working great however USB devices such as thumb drives and external hard drives wont show up. I have been looking around a bit and when I run sudo fdisk -l it displays this: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00065684 Device Boot Start End Blocks Id System /dev/sda1 * 1 29255 234983424 83 Linux /dev/sda2 29255 30402 9212929 5 Extended /dev/sda5 29255 30402 9212928 82 Linux swap / Solaris Disk /dev/sdb: 16.0 GB, 16026435072 bytes 64 heads, 32 sectors/track, 15283 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000df90d Device Boot Start End Blocks Id System /dev/sdb1 * 1 15283 15649776 7 HPFS/NTFS It does seem to display my 16 gig thumb drive but other then seeing it here I cant access it to read and write files to it. It does the same with my external hard drive. I know those devices work as I have tried them on my other computer and they are working fine. Also this is what is in fstab if this will help anybody help me: proc /proc proc nodev,noexec,nosuid 0 0 /dev/sdb1 / ext4 errors=remount-ro 0 1 /dev/sdb5 none swap sw 0 0 Thank you very much for the help everyone.

  Read the article

• Get Proactive with Fusion Middleware

  - by Daniel Mortimer

  Prevent, Resolve, Upgrade ! If you have not seen or bookmarked it already, check out:Get Proactive with Fusion Middleware [ID 1388293.1]This is a one stop shop for navigating to proactive support material, tools, and communication channels related to Oracle Fusion Middleware e.g. Lifecycle Advisors Information Centers Diagnostic and Health Check Tools like RDA and OCM Support Communities Newsletters Furthermore, once in this support document, a click on the "Proactive Home" option in the menu will take you to the main Get Proactive support document. From this document you can access other product family "Get Proactive" documents such as the ones belonging to the Database and Enterprise Manager.Oracle Premier Support: Get Proactive! [ID 432.1]432.1 .. nice easy number to remember :-) The "Get Proactive" support documents will be updated on a monthly basis. If you have any comments or feedback feel free to post against this blog entry. Or alternatively click the "Rate this Document" icon when viewing the support document in My Oracle Support.

  Read the article

• Google reverse an analytic

  - by Dan

  I am confused about what code must be executed to reverse a google analytic. I have the following code pasted within a test page: <body onLoad=”function()”> <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-25305776-3']); _gaq.push(['_trackPageview']); _gaq.push(['_addTrans', '11455', // order ID - required '-42.38', // total - required '-2.38', // tax '-15.00' // shipping ]); _gaq.push(['_addItem', '11455', // order ID - necessary to associate item with transaction 'Evan Turner Turningpoint™ Basketball Pants', // product name '25.00', // unit price - required '-1' // quantity - required ]); _gaq.push(['_trackTrans']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); </script> Is this correct? Thanks!

  Read the article

• Gnome shell not starting at login, but can start from terminal (Ubuntu 12.04)

  - by Mat Leonard

  I upgraded to Ubuntu 12.04 recently and for some reason it broke Gnome 3. The shell doesn't start up at login. My .xsession-errors looks like this right after I log in: gnome-session[1689]: WARNING: Session 'gnome' runnable check failed: Timed out (gnome-settings-daemon:1744): color-plugin-WARNING **: failed to get edid: unable to get EDID for output (gnome-settings-daemon:1744): color-plugin-WARNING **: unable to get EDID for xrandr-default: unable to get EDID for output (gnome-settings-daemon:1744): color-plugin-WARNING **: failed to reset xrandr-default gamma tables: gamma size is zero ** Message: applet now removed from the notification area ** Message: using fallback from indicator to GtkStatusIcon ** Message: moving back from GtkStatusIcon to indicator Then I can run gnome-shell --replace, the shell starts up and everything works. This is what I get immediately after: Window manager warning: Log level 16: Unable to register authentication agent: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: An authentication agent already exists for the given subject Window manager warning: Log level 16: Error registering polkit authentication agent: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: An authentication agent already exists for the given subject (polkit-error-quark 0) (gnome-shell:2442): folks-WARNING **: Failed to find primary PersonaStore with type ID 'eds' and ID 'system'. Individuals will not be linked properly and creating new links between Personas will not work. The configured primary PersonaStore's backend may not be installed. If you are unsure, check with your distribution Also, if I run /usr/lib/nux/unity_support_test -p, everything comes back as Yes and this checks out: OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce 8300 GS/PCIe/SSE2 OpenGL version string: 3.3.0 NVIDIA 295.40 It isn't a huge problem since I can get gnome shell to work, but it is a little annoying. So, I'd like to fix this. Thanks for your help.

  Read the article

• Making LISPs manageable

  - by Andrea

  I am trying to learn Clojure, which seems a good candidate for a successful LISP. I have no problem with the concepts, but now I would like to start actually doing something. Here it comes my problem. As I mainly do web stuff, I have been looking into existing frameworks, database libraries, templating libraries and so on. Often these libraries are heavily based on macros. Now, I like very much the possibility of writing macros to get a simpler syntax than it would be possible otherwise. But it definitely adds another layer of complexity. Let me take an example of a migration in Lobos from a blog post: (defmigration add-posts-table (up [] (create clogdb (table :posts (integer :id :primary-key ) (varchar :title 250) (text :content ) (boolean :status (default false)) (timestamp :created (default (now))) (timestamp :published ) (integer :author [:refer :authors :id] :not-null)))) (down [] (drop (table :posts )))) It is very readable indeed. But it is hard to recognize what the structure is. What does the function timestamp return? Or is it a macro? Having all this freedom of writing my own syntax means that I have to learn other people's syntax for every library I want to use. How can I learn to use these components effectively? Am I supposed to learn each small DSL as a black box?

  Read the article

• Is this a dual monitor reset bug?

  - by Tentresh

  My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) A few minutes after I login to my dual monitor setup, it gets reset to mirror screens. If I restore the settings via the displays application, everything is fine. On each reset, the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset, /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like its interface, but manually fiddling with resolution on every login is not bearable.

  Read the article

• "Enable Wireless" option is disabled in network settings

  - by silenTK

  I'm using Ubuntu 11.10 (dual booted with Windows 7) but I'm unable to access Internet wireless even though I can do so on Windows 7. The output for rfkill list all is given below: rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no The output for sudo lshw -C network *-network DISABLED is: description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 01 serial: 11:11:11:11:11:11 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:16 memory:c2500000-c2503fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 05 serial: 22:22:22:22:22:22 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:42 ioport:3000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff Broadcom STA wireless driver is installed, activated, and currently in use. My laptop is a HP-Pavilion-g6-1004tx. My hardware switch is on. Enable Wireless option is also disabled in network settings.

  Read the article

• What causes player box/world geometry glitches in old games?

  - by Alexander

  I'm looking to understand and find the terminology for what causes - or allows - players to interfere with geometry in old games. Famously, ID's Quake3 gave birth to a whole community of people breaking the physics by jumping, sliding, getting stuck and launching themselves off points in geometry. Some months ago (though I'd be darned if I can find it again!) I saw a conference held by Bungie's Vic DeLeon and a colleague in which Vic briefly discussed the issues he ran into while attempting to wrap 'collision' objects (please correct my terminology) around environment objects so that players could appear as though they were walking on organic surfaces, while not clipping through them or appear to be walking on air at certain points, due to complexities in the modeling. My aim is to compose a case study essay for University in which I can tackle this issue in games, drawing on early exploits and how techniques have changed to address such exploits and to aid in the gameplay itself. I have 3 current day example of where exploits still exist, however specifically targeting ID Software clearly shows they've massively improved their techniques between Q3 and Q4. So in summary, with your help please, I'd like to gain a slightly better understanding of this issue as a whole (its terminology mainly) so I can use terms and ask the right questions within the right contexts. In practical application, I know what it is, I know how to do it, but I don't have the benefit of level design knowledge yet and its technical widgety knick-knack terms =) Many thanks in advance AJ

  Read the article

• How do I get Graphics drivers / bluetooth / card reader working on an Acer Aspire V3-571G?

  - by Adam

  A couple of days ago I bought an Acer Aspire V3-571G laptop without a system installed on it. The only thing that was there was Linux Linpus. I created a bootable CD with Ubuntu 12.04 64-bit - I read that my processor was 64 bit and that it might be a good configuration for my gear (I'm not especially fluent with all the computer stuff, still trying to learn) and replaced Linpus with Ubuntu. Everything seemed to work fine, but there're few exceptions to that which came pass my way. My bluetooth doesn't work. It seems to be switched on, but when I check my system settings the button is actually off, and I can't drag it 'perminently' to the 'on' position. Tried a couple of commands I found on the net, none of them helped and there was no word whatsoever in my BIOS settings about enabling bluetooth. My card reader has some serious problems with copying more than one file at a time. I tried to put some music on my phone through a MicroSD card adapter (because my bluetooth doesn't work) and it got stuck every single time I copied an album on it. I'm not sure if all my drivers were properly installed, so I checked in the terminal if it could tell me sth about my graphics. typed: sudo lshw -c display and what i got was: *-display UNCLAIMED description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller cap_list configuration: latency=0 resources: memory:b2000000-b2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) *-display description: VGA compatible controller product: Ivy Bridge Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:b3000000-b33fffff memory:c0000000-cfffffff ioport:3000(size=64) As I said I'm no expert and not english-speaking generally, but it doesn't seem to be right. I've got a NVIDIA GeForce GT 640M.

  Read the article

• Discs in DVD Drive not being read

  - by I Heart Ubuntu

  Does anyone have an experience with Ubuntu that is no longer reading discs in the DVD drive? This is my first time Ubuntu does not see the disc :| The disc is fine and works on my other Ubuntu computers. The drive is there and powered. I can even type in eject in a terminal and the drive will open. Using the command: sudo lshw -C disk I am able to see info about my drive too. Actually BOTH of my internal DVD drives cannot read discs anymore. If the output is not readable below, here is the info in pastebin. http://pastebin.com/GqqSCTPw *-cdrom:0 description: DVD writer product: DVD_RW ND-3500AG vendor: _NEC physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/cdrom1 logical name: /dev/cdrw1 logical name: /dev/dvd1 logical name: /dev/dvdrw1 logical name: /dev/scd0 logical name: /dev/sr0 version: 2.1B serial: [_NEC DVD_RW ND-3500AG2.1B06022300BT-LIGGY capabilities: removable audio cd-r cd-rw dvd dvd-r configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD-RAM writer product: CDDVDW SH-S222A vendor: TSSTcorp physical id: 0.1.0 bus info: scsi@0:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: SB01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc

  Read the article

• Ubuntu server 11.04 recognize only 1 core instead of 4

  - by Kreker

  I searched for other questions and googled a lot but I don't find a solution for solving this problem. Ubuntu Server 11.04 64bit installed on Dell Poweredge with Intel Xeon X5450. He only recognize 1 of the 4 cores I have. Tried to modify the GRUB config but didn't work. IN the machine BIOS I didn't find anything useful. CPU root@darwin:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping : 10 cpu MHz : 2992.180 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 5984.36 clflush size : 64 cache_alignment : 64 address sizes : 38 bits physical, 48 bits virtual power management: GRUB root@darwin:~# cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=2 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="noapic nolapic" #was with acpi=off # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" Complete dmesg Too long, posted on pastebin http://pastebin.com/bsKPBhzu

  Read the article

• Wireless doesn't work after installing 11.10

  - by Ingram

  I just did a fresh install of 11.10 32 bit and I can't get my wireless to work. I installed the drivers the Broadcom STA wireless drivers through additional drivers and rebooted, but it still doesn't see any wireless networks Did something change in 11.10 that makes the wireless card not work anymore? I was using 10.10 before, and it worked fine. Do I need to go back to 10.10? sudo lshw -C network [sudo] password for user1: *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 10 serial: 00:1f:16:be:55:ff size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 duplex=full firmware=sb v2.19 ip=192.168.0.70 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:43 memory:f0300000-f030ffff *-network UNCLAIMED description: Network controller product: BCM4311 802.11b/g WLAN vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:09:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0400000-f0403fff

  Read the article

• Problem with APTonCD application

  - by Harikrishnan

  I created a iso image using aptoncd & burned it to a dvd. Now when i tried to restore, the program does not detect the dvd in the drive. It shows "Please insert a disc in the drive." and if we click "ok" it shows E: Failed to mount the cdrom. The dvd is in the drive itself. I tried sudo lshw -C disk and the output is: *-cdrom description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 logical name: /media/APTonCD logical name: /media/apt version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 mount.fstype=iso9660 mount.options=ro,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500 state=mounted status=ready *-medium physical id: 0 logical name: /dev/cdrom logical name: /media/APTonCD logical name: /media/apt configuration: mount.fstype=iso9660 mount.options=ro,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500 state=mounted Then i checked in disk utility application. in that dvd rom is shown as /dvd/sr0 My ubuntu version is 10.10. Please help me to solve the problem.

  Read the article

• Ubuntu 13.04 to 13.10: Filesystem check or mount failed

  - by SamHuckaby

  I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

  Read the article

• Pausing and Resuming the jQuery / ASP.NET News Ticker

  Many websites display a news ticker of one sort or another. A news ticker is a user interface element that displays a subset of a list of items, cycling through them one at a time after a set interval. In December 2010 I wrote an article titled Use jQuery and ASP.NET to Build a News Ticker that explored how to create your own news ticker widget using jQuery and ASP.NET. The news ticker's content is defined as an unordered list (<ul>) where each list item (<li>) represents a news headline. Once the ticker's content is defined, having it cycle through the head lines is as simple as calling the JavaScript function startTicker(id, numberToShow, duration), which begins cycling the headlines in the unordered list with the specified id, showing numberToShow headlines at a time and cycling to the next headline every duration number of milliseconds. This installment shows how to enhance the news ticker to enable pausing and resuming. With these enhancements, the ticker can be configured to automatically pause rotating its headlines when the user mouses over it, and to resume rotating them once the user mouses out. Similarly, with a bit of additional markup and script you can add pause and play buttons to a ticker, allowing a user to start and stop the ticker by clicking an image or button. Read on to learn more! Read More >

  Read the article

• EPM Patch Set Updates - May 2014

  - by Paul Anderson -Oracle

  .PSU_DocID { font-family: Arial, Helvetica, sans-serif; font-size: 9px; font-style: normal; } .PSU_PatchID { font-family: Arial, Helvetica, sans-serif; font-size: 11px; font-style: normal; } The following is Enterprise Performance Management (EPM) Patch Set Updates (PSU) released last month (May 2014).  The "Patch" ID links will access the patch directly for download from "My Oracle Support" (login required). Oracle Hyperion 11.1.2.3.x Hyperion Essbase Studio Server 11.1.2.3.501 - Patch 18505506 Hyperion Essbase Studio Console MSI 11.1.2.3.501 - Patch 18505503 Oracle Hyperion Profitability and Cost Management 11.1.2.3.501 - Patch 18685108 Hyperion Strategic Finance 11.1.2.3.501 - Patch 18400594 Hyperion Essbase Admin Services Server 11.1.2.3.501 - Patch 18505475 Hyperion Essbase Admin Services Console MSI 11.1.2.3.501 - Patch 18505468 Hyperion Essbase RTC 11.1.2.3.501 - Patch 18505499 Hyperion Essbase Server 11.1.2.3.501 - Patch 18505489 Hyperion Essbase Client 11.1.2.3.501 - Patch 18505494 Hyperion Essbase Client MSI 11.1.2.3.501 - Patch 18505483 Hyperion Analytic Provider Services 11.1.2.3.501 - Patch 18505515 Oracle Hyperion 11.1.2.2.x Hyperion Financial Management 11.1.2.2.307 - Patch 18490422 NOTE: Some patches listed may have been released a few days outside of the stated month. To view the patches released over previous months visit the earlier Blog posts: April 2014 EPM PSU Released March 2014 EPM PSU Released February 2014 EPM PSU Released January 2014 EPM PSU Released For the latest Enterprise Performance Management Patch Set Updates visit: Oracle Hyperion EPM Products [Doc ID 1400559.1] Be sure to review the related Readme files available per Patch Set Update.

  Read the article

• BCM2046B1 Bluetooth Dongle connection problem

  - by Andfoy

  Well i have a Blueooth dongle with an BCM2046 IC intrregated, my problem is that when i connect it, Ubuntu recognize it, but it don't work whe i try to scan or scan the PC from other device, i replaced the default Gnome Bluetooth manager and i installed Blueman, but the problem presists. The Bluetooth LED indicator appears to be "working". I'm using 11.10 Oneiric Ocelot hcitool dev: Devices: hci0 89:21:XX:XX:XX:XX lsusb: Bus 002 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 002 Device 004: ID 0a5c:2100 Broadcom Corp. Bluetooth 2.0+eDR dongle hciconfig -a: hci0: Type: BR/EDR Bus: USB BD Address: 89:21:XX:XX:XX:XX ACL MTU: 1017:8 SCO MTU: 64:0 UP RUNNING PSCAN ISCAN RX bytes:1329 acl:0 sco:0 events:40 errors:0 TX bytes:671 acl:0 sco:0 commands:35 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x4a0100 Service Classes: Networking, Capturing, Telephony Device Class: Computer, Uncategorized HCI Version: 2.0 (0x3) Revision: 0x4000 LMP Version: 2.0 (0x3) Subversion: 0x430e Manufacturer: Broadcom Corporation (15) Sorry for my English and thanks for any hints.

  Read the article

• Using Python to traverse a parent-child data set

  - by user132748

  I have a dataset of two columns in a csv file. Th purpose of this dataset is to provide a linking between two different id's if they belong to the same person. e.g (2,3,5 belong to 1) e.g COLA COLB 1 2 ; 1 3 ; 1 5 ; 2 6 ; 3 7 ; 9 10 In the above example 1 is linked to 2,3,5 and 2 is the linked to 6 and 3 is linked to 7. What I am trying to achieve is to identify all records which are linked to 1 directly (2,3,5) or indirectly(6,7) and be able to say that these id's in column B belong to same person in column A and then either dedupe or add a new column to the output file which will have 1 populated for all rows that link to 1 e.g of expected output colA colB GroupField 1 2 1; 1 3 1; 1 5 1 ; 2 6 1 ;3 7 1; 9 10 9; 10 11 9 I am a newbie and so am not sure on how to approach this problem.Appreciate any inputs you'll can provide.

  Read the article

• What is the aim of this email? Is this a ping/sping? [closed]

  - by mplungjan

  Hi, I received this spam in my catch-all. As a webmaster of the domain it was sent to, I am really curious what the reason for this mail is. It was sent to a non-existent user "tania" on my domain - here I used mydomain.zzz - what do the sender want to achieve? Since many mail servers have stopped backscattering, not getting a bounce would not mean anything, would it? And if this is off topic, where inb the StackExchange WOULD it be on topic? Delivered-To: [email protected] Received: (qmail 8015 invoked from network); 27 Jan 2011 02:32:47 -0000 Received: from unknown (HELO p3pismtp01-021.prod.phx3.secureserver.net) ([10.6.12.26]) (envelope-sender <[email protected]>) by smtp35.prod.mesa1.secureserver.net (qmail-1.03) with SMTP for <[email protected]>; 27 Jan 2011 02:32:47 -0000 X-IronPort-Anti-Spam-Result: At4FAAlnQE1GVjtCVGdsb2JhbACWXo4gCwEWCA0YJLwyhU8EhRc Received: from mx.dt3ls.com ([70.86.59.66]) by p3pismtp01-021.prod.phx3.secureserver.net with ESMTP; 26 Jan 2011 19:32:47 -0700 Received: from 70.86.59.66 by mx.dt3ls.com (Merak 8.9.1) with ASMTP id JXF39710 for <[email protected]>; Wed, 26 Jan 2011 17:31:10 -0500 Return-Path: [email protected] Status: Message-ID: <20110126173109.4d9d6c3f2b@1c3c> From: "Tech Support" <[email protected]> To: <[email protected]> Subject: Information, as instructed. Date: Wed, 26 Jan 2011 17:31:09 -0500 X-Priority: 3 X-Mailer: General-Mailer v.3 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Quote: I give it to you not that you may remember time, but that you might forget it now and then for a moment and not spend all your breath trying to conquer it. Because no battle is ever won he said. They are not even fought. The field reveals to a man his own folly and despair, and victory is an illusion of philosophers and fools. William Faulkner The Sound and the Fury

  Read the article

< Previous Page | 610 611 612 613 614 615 616 617 618 619 620 621  | Next Page >