Search Results

Search found 26928 results on 1078 pages for 'disk image'.

Page 614/1078 | < Previous Page | 610 611 612 613 614 615 616 617 618 619 620 621  | Next Page >

• Can't find my DVD drive in Ubuntu 12.04

  - by user72953

  I am completely new to Linux, due to some problems in my Windows I decided to give Linux a try. I am quite liking it accept for some minor issues. The biggest of them is that I cannot find my DVD drive in Ubuntu. After I insert the disk, the drive's green light flickers and then nothing. I don't get anything on my unity bar or desktop. There is no folder inside my /dev folder which indicates a dvd drive. There is a cdrom folder in my root folder but nothing is there. If you guys know what's wrong, I'd appreciate the help. Am a complete newbie so don't expect me to know anything about Ubuntu, although I have spent lots of hours in last 2 days googling my issue so I have basic information...

  Read the article

• Can I recreate main user account and delete old?

  - by nazar_art

  Something happen with performance of super user account. When I tried to load home folder it has really looooong booting duration. If compare to earlier time. And I couldn't figure out why this happen and what is wrong. It has been started after I copied a lot of contents from external usb disk. But if I go through other user account all work perfect, without this trouble, fast and cool. I want to create new user account copy all necessary content to this account and delete old account. Can I recreate main user account and delete old??

  Read the article

• Getting Started with 12.04 LTS Problems

  - by mark

  Okay previously I used ubuntu 10.04 in Desktops and Loved it! I bought a newer Toshiba Satellite with an i7 CPU, 8GB Ram, 1TB HD, first thing I tried to do was install Ubuntu 9 on it then I found out it was no longer Supported. (I gave my 10.04 disk away) So I tried installing Windows 7 and experienced SO MANY problems, I am going back to try 12.04. Starting all over again. After installing 12.04 Wireless was Detected yet said it was Disabled by a Hardware Switch. Went read through the Message Boards found Solution which was Sudo rf Kill All. Okay all excited I would finally get my Ubuntu to finally work I rushed back to my laptop from the internet cafe, and went looking for the TERMINAL input on my Ubuntu 12.04, and I cannot find the Terminal. If I can't find the TERMINAL how Can I enter any Sudo Stuff? So I guess the first question is Where is the Terminal Located in 12.04? Thank you.

  Read the article

• What do I need to do when installing old version of ubuntu on new arch platform?

  - by Blangero

  I got a board with aptio cpu which is said to be of new platform and may have driver problems while using old version of ubuntu, and it do have. After installing my customized Live ubuntu server with X(the system runs as a liveCD), X starts but failed to get right resolution. If I run ubiquity in the live system to install the system to my disk, I can't start X and the whole console was a mess.Tried connect from ssh and upgrade, failed to solve the problem. Install ubuntu 12.04.2 desktop, at bootup the text was a mess, X starts and still could not get the right resolution. Install ubuntu 14.04 server, at bootup the text was also a mess, but it turned clear and the resolution is right. So what else do I need to provide? CPUInfo ? lspci -nn | grep VGA ? anything else? And what's the problem? What can I do to support the newest arch in my customized system? Thanks

  Read the article

• How can I efficiently create/store/implement animations as I add to my game?

  - by nickbadal

  My game's characters are made up of different parts (head/body/legs/etc), and whatever items they have equipped. As I'm creating the animation system for my game, I want to try to anticipate a large number of combinations for different pieces for each character. Originally, I had planned on having a frame-by frame animation for each piece for each animation, and then layer them to combine them into a character, but this seems like it would be a lot of work for my artist, and that the memory/disk size would start to add up as well since we would need a sprite for every frame, of every customization of every piece, in every animation, for every character. What efficient ways are there to create/implement these animations as we add more and more configurations to our game?

  Read the article

• SQL Injection: How it Works and How to Thwart it

  This is an extract from the book Tribal SQL. In this article, Kevin Feasel explains SQL injection attacks, how to defend against them, and how to keep your Chief Information Security Officer from appearing on the nightly news. NEW! The DBA Team in The Girl with the Backup TattooPina colada in the disk drives! How could any DBA do such a thing? And can the DBA Team undo the damage? Find out in Part 2 of their new series, 5 Worst Days in a DBA’s Life. Read the new article now.

  Read the article

• Ask The Readers: What’s Your Favorite Co-Op Game?

  - by Jason Fitzpatrick

  For many readers, the weather is getting chillier and that means more time indoors. What better time to take a look at the best co-op games around? Jump in and put in a nod for your favorite game and setup. Wallpaper available here. Whether you’re playing DS-to-DS with your spouse, inviting all your buddies over for a whole-house LAN fest, or couch co-op’ing through your favorite RPG, we want to hear all about your favorite games and the ways you play them. Sound off in the comments with your co-op tips and tricks; make sure to check back in on Friday for the What You Said roundup to find some new titles to tide you over until the warm weather comes around again. How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems 7 Ways To Free Up Hard Disk Space On Windows

  Read the article

• Ubutnu 12.04 mdadm inactive

  - by user32274

  For a while now, my RAID 5 has ceased to work. Everytime I tried "madm --detail /dev/md127", its states all the drive and drive info, but that two of the drives have been removed. After some restarts, doing the same thing, i am getting /dev/md127 does not appear to be active. When I go into DiskUtil, I can see all 6 Hard Drives healthy and present, and i can see the Raid 5 at the bottom under Multi-disk Devices. However, the Raid says 0.0kb, and is not active. Please help and let me know how to proceed from here. I would really like to avoid rebuilding the RAID, especially because all 6 drives seem to be healthy and present. Thanks so much.

  Read the article

• How safe is ubuntu?

  - by VJo

  Last week I started desktop sharing using krfb. Since I continue last session, this program keep on starting again. Two days ago I noticed messages poping up saying something like "rejecting uninvited connection from (some ip)", but today I figured it might be because of this and I was right. The krfb was running in the background. Hence the question. How safe is ubuntu? Should I expect someone to connect to my computer and erase everything I got on disk? EDIT To extend my question : how safe it is comparing to other OSs (windows, mac,...)? How safe it is comparing to other distros?

  Read the article

• After I backed up my ubuntu 12.04, my system crashed

  - by user95490

  Outline: I use the way shown on http://ubuntuforums.org/showthread.php?t=35087 to backup my linux system, but somehow when I restore it, it crashes. Problem Description: When I reboot, there's an information: Gave up waiting for root device. Common problems: -- Boot args (cat /proc/cmdline) -- Check rootdisplay = (did the system wait long enough?) -- Check root = (did the system wait for the right device?) -- Missing modules (cat /proc/modules; ls dev) ALERT! /dev/disk/by-uuid/9cf6f563-86d1-47be-bc26-92dd7df35cb3 does not exist. Dropping to a shell!

  Read the article

• Optimize bootup sequence

  - by ubuntudroid

  I'm on Ubuntu 11.04 (upgraded from 10.10) and suffering really high bootup times. It got so annoying, that I decided to dive into bootchart analysis myself. Therefore I installed bootchart and restarted the system which generated this chart. However, I'm not really experienced in reading such stuff. What causes the long bootup sequence? Edit: Here is the output of hdparm -i /dev/sda: /dev/sda: Model=SAMSUNG HD501LJ, FwRev=CR100-12, SerialNo=S0MUJ1EQ102621 Config={ Fixed } RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4 BuffType=DualPortCache, BuffSize=16384kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=976773168 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 AdvancedPM=no WriteCache=enabled Drive conforms to: unknown: ATA/ATAPI-3,4,5,6,7 * signifies the current active mode And here the output of hdparm -tT /dev/sda /dev/sda: Timing cached reads: 2410 MB in 2.00 seconds = 1205.26 MB/sec Timing buffered disk reads: 258 MB in 3.02 seconds = 85.50 MB/sec

  Read the article

• Greenfoot project is read-only

  - by AzharHafiz.com

  I received this message when starting greenfoot on ubuntu 11.10 I'm a newbie and not sure where does the file located (greenfoot) The project is read-only.How and where do I change the permission? You will not be able to create objects or execute methods. Either the access rights of the project directory are set as 'read only' for you, or the whole file system is not writable (is it a CD?). To fully use this project, you must ensure that it is on a writable file system (usually your hard disk), and that you have write permission in the project directory and each file within it. This can often be accomplished by choosing "save as" from the Project menu after closing this dialog.

  Read the article

• Attempting to install Ubuntu 11.10 along side Windows 7 Professional 64bit. Installer doesn't recognize an operating system present

  - by KichigaiDave

  System Details: Asus Sabertooth 990FX motherboard AMD FX-8120 CPU 16 GB DDR3 1600 Corsair Vengance RAM (4x4) EVGA Nvidia GTX-560Ti video card 2x Dvd/cd rw dirves 1 Bluray RW drive 1 Orico USB 3.0 & eSata panel 1 Sabrent floppy bay card reader w/USB 2.0 port 760W pc power & cooling PS OCZ agility 120GB SSD (Windows 7 Professional 64bit installed in an approx 80gb partition, NTFS. There is also a "System Reserved" partition shown in disk management at 100mb in size, also NTFS) That leaves about 32GB usable free, un-partitioned space in which I hoped to install Ubuntu. However when I run the Ubuntu 11.10 AMD64 installer, it doesn't show there is even an operating system installed. It just shows the entire drive as free-unpartitioned space. Just not sure what to do here. I was thinking about using the Wubi installer, but i don't know about that. Is the performance reduction pretty drastic? Thanks,

  Read the article

• Grub rescue doesn't allow me to boot from LIVE CD/USB

  - by Thameem

  I used to have Windows Vista & Ubuntu 12.04 on dual boot. Accidentally, I deleted the Linux partition and landed on Grub rescue on the next boot. The tricky thing for me here is I have been trying to boot through LIVE CD/USB of the ubunutu version, other linux versions but in vain. What happens is, it appears as if it reads the CD/DVD drive or the USB flashes for a while when trying to boot through LIVE versions but the Grub rescue appears after a while. The only option I could think here is to remove the hard disk and connect to the other laptop I have through USB and reinstall a fresh OS. Please suggest me a way to boot through the DVD/USB again. My laptop is Sony VAIO CR32 series.Thanks.

  Read the article

• Windows 7 and Ubuntu Boot issue

  - by user115137

  I had the idea to dual boot Win 7 and Ubuntu and what I did was the following: Made a clean install of win 7 using all of my hard drive, next I used the Ubuntu live cd and gparted to partition my drive to be the following: /dev/sda1 ext4 20GB (Linux root) /dev/sda2 ntfs 100GB(Win7) /dev/sda3 ext4 350GB(Home) /dev/sda4 extended 4GB(swap) The thing is, when installing ubuntu I deleted the partition win 7 creates for its boot sector and recovery and then resized the drive to look like what I mentioned, and Ubuntu installed GRUB to the MBR. When GRUB boots I can see Ubuntu but not Windows, how can I chainload it? Or should I fix the windows mbr with the windows 7 installation disk and try to set the dual boot from there? I don't really care which one of the 2 bootloaders I end up using, I just want the dual boot to work out. Thanks

  Read the article

• Distro that I can load to ram?

  - by NullUserException

  Is there a modified version of Ubuntu that I can choose to load to RAM on start up? Kinda like the LiveCD, but that can be easily modified (ie: I can install stuff) when I choose to boot from disk. The idea is to install it to a USB drive. I know there's something similar but slax is lacking in many departments. A "full" version Ubuntu would be better. A LiveUSB installation seems to be pretty close to what I want, but apparently I have to choose whether or not it will be persistent by the time I install it. I want to be able to choose that every time I boot.

  Read the article

• Question regarding drives

  - by user205934

  I am a new Ubuntu user who has spent a lot of time on Windows. A very common practice for me on Windows was making two drives, C: and D: , storing installs/files in C:, and I used D: for backup or if I downloaded something that I wanted to save, I saved in D: When installing Ubuntu, it asked me if I wanted to replace Windows 7. I thought it would install Ubuntu on C: but instead it used the whole partition, nevertheless I recovered my backup using testdisk. What I wanted to do was to create a similar backup drive on Linux too. My current partition table: sda 8:0 0 232.9G 0 disk +-sda1 8:1 0 230.9G 0 part / +-sda2 8:2 0 1K 0 part +-sda5 8:5 0 2G 0 part [SWAP] sr0 11:0 1 1024M 0 rom So should I use Gparted to create another sda3 and store my important data on that? Also my current sda2 is listed as an extended partition, should I delete it? It's a very small partition, just 1K.

  Read the article

• Analyzing I/O Characteristics and Sizing Storage Systems for SQL Server Database Applications

  Understanding how to analyze the characteristics of I/O patterns in the Microsoft® SQL Server® data management software and how they relate to a physical storage configuration is useful in determining deployment requirements for any given workload. A well-performing I/O subsystem is a critical component of any SQL Server application. I/O subsystems should be sized in the same manner as other hardware components such as memory and CPU. As workloads increase it is common to increase the number of CPUs and increase the amount of memory. Increasing disk resources is often necessary to achieve the right performance, even if there is already enough capacity to hold the data. Too many SQL Servers to keep up with?Download a free trial of SQL Response to monitor your SQL Servers in just one intuitive interface."The monitoringin SQL Response is excellent." Mike Towery.

  Read the article

• Ubuntu 12.04 Server monitor goes into sleep mode (no display) after fresh install

  - by xamox

  For some reason I can boot and either use Ubuntu 12.04 server edition, or desktop version. I can live boot the disk, I can go through the installer, or even use the ubuntu alternate installer. But for some reason after the install completes and I reboot the monitor seems to go back into sleep mode and then never loads the command prompt. This is on an industrial adlink MXE-1300 PC. I've installed ubuntu server fine on other models of adlink machines but this one doesn't want to seem to play nice. To me it seems like if it was a video card issue than I could never even load the installer or run ubuntu in live mode. Any thoughts or troubleshooting tips would be greatly appreciated.

  Read the article

• How to access the SD card through my Sony Ericsson Xperia Arc Phone?

  - by user16364

  I have a Sony Ericsson Xperia Arc phone and I cannot access its SD card through the USB cable provided. I have set the USB connection mode to MSC yet when I connect the phone to my computer I cannot see the SD card (or anything for that matter). The Disk Utility however, does see an SEMC Mass Storage device but it says that no media was detected. I have validated that the SD card works as I removed it from the camera and plugged it into a card reader and saw all the photos and files stored on it. I have validated that the phone works as I have connected it (in MSC mode) to my wife's Windows 7 computer. Can anyone please tell me how I can access the SD card on my phone.

  Read the article

• Ubuntu One lost most of my files!

  - by Max

  I keep in my UbuntuOne the source code of my projects as a back up. In the past it worked and I never had problem. It happened that I had to change the hard disk of my laptop and I installed a fresh Ubuntu 12.10 in the new one. First time I connected with UbuntuOne it downloaded my files, but when I went to see my projects almost all my c++ source code files were missing!!!... I tried to check if I still have them on UbuntuOne by accessing from the web but nothing... my work is lost forever. I don't know who to ask for help? Is there a way to get back my precious files? Honestly I can't trust this service any more, I'm very disappointed. (edit: thanks God I found a back up in one of my external hard disks. I won't trust Ubuntu One any more, it's buggy and quite slow. )

  Read the article

• What should be the correct ownership of /tmp /var /usr and subdirectories?

  - by sbergeron

  For some reason I think the permissions of those were messed up from a small amount of disk corruption I had. This may be a dupe, I don't know but I googled it and didn't find any mention of it. I need to know how the permissions of them should be set up as currently my computer can't actually use the tmp directory and I can't download anything consequently. I have access to the recovery mode command line but while in sudo user prompts it doesn't seem to work correctly. Also something is wrong with package management and I get dpkg: error: unable to access dpkg status area: read-only file system. I know my system is really messed up but I don't want to have to reinstall AGAIN.

  Read the article

• apt-get upgrade E: Sub-process /usr/bin/dpkg returned an error code (1)

  - by user292425

  When I typed apt-get install upgrade, I got error: Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up linux-netizen (1.0.1-1) ... chrome: no process found dpkg: error processing linux-netizen (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: linux-netizen E: Sub-process /usr/bin/dpkg returned an error code (1) So I tried some method to fix it: sudo apt-get install -f and sudo apt-get install --configure -a But all methods are not working. Please help me....

  Read the article

• Nautilus won't browse my USB hard drive unless I double click it twice.

  - by agnul

  On my laptop, running 10.10, whenever I plug in a thumb drive Nautilus will add an icon on the desktop and open a file manager window with the drive contents. This does not work for my 250Mb external hard drive: the icon is added on the desktop, but no file manager window pops up. Double clicking on the icon just causes some disk activity (on the system drive) and nothing else. Double clicking another time on the icon the file manager eventually opens. At first I thought this was related to nautilus-elementary, but after removing nothing has changed. How do I even start debugging this?

  Read the article

• PCI function number for SATA AHCI controller

  - by Look Alterno

  I'm debugging a second stage boot loader for a PC with SATA AHCI controller. I'm able to enumerate the PCI bus and find the hard disk. So far, so good. Now, lspci in my notebook (Dell Inspiron 1525) show me: -[0000:00]-+-1f.0 Intel Corporation 82801HEM (ICH8M) LPC Interface Controller +-1f.1 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller +-1f.2 Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller \-1f.3 Intel Corporation 82801H (ICH8 Family) SMBus Controller My question: Is SATA AHCI Controller always function 2 in any PC? If not, how I found? I don't pretend to be general; booting my notebook will be good enough, without compromise further refinements.

  Read the article

< Previous Page | 610 611 612 613 614 615 616 617 618 619 620 621  | Next Page >