Search Results

Search found 24726 results on 990 pages for 'message passing'.

Page 616/990 | < Previous Page | 612 613 614 615 616 617 618 619 620 621 622 623  | Next Page >

• Hard drive not detected after installing the Operating System

  - by Eka Anggraini

  After I failed to install SUSE Linux 10.0, I want to go back to the windows operating system again. but when I want to install windows, my hard drive is not detected, whereas in the BIOS in the detection / known. I was dizzy, his mistake about it. Where is. I was looking for, my problem is named after the Blue Screen of Death (BSOD) that is an error message from windows to prevent further damage, but with various types of error messages, one of them as I have *** STOP: 0X0000007B (0XF896A524, 0XC0000034, 0X00000000, 0X00000000) I do not know, where the system is broken. but why hard drive is not known ... at the time of going to re-install?

  Read the article

• Files not accessible

  - by gokul

  My system is running on a pc with C:\ Drive out of space. So I tried to delete some file and clean up to get more space. I found that the %Temp% {C:\Users\Username\AppData\Local\Temp} takes lots of space and tried to delete files in it. But when I open it , it alerted me with the message C:\Users\Username\AppData\Local\Temp is not accessible The file or directory is corrupted and unreadable? What to do? Is deleting files from Temp harmful to computer?

  Read the article

• HDMI connection does not support HDCP

  - by mroggi

  Hi, My problem: error message when playing blu-ray movies stating that the HDCP encryption could not be established. My setup: A new projector (EPSON EMP TW700) with a HDCP-compliant HDMI port a PC with a brand-new graphics adapter (Sapphire HD 4350 512MB DDR2) supporting HDCP Connection made with a DVI cable (it's installed in my wall) and a DVI-HDMI adapter to connect the projector Latest drivers and software My questions: What can I do to establish the HDCP connection? Would it help to use the HDMI output of the graphics adapter instead of the DVI (could it be that the HDCP chip is only supported on HDMI?) Any other ideas? I am very thankful for any hint.

  Read the article

• Hiding "Syntax OK" from apache2ctl output

  - by Oscar Barrett

  I am checking whether a particular apache module is installed using apache2ctl -M. When listing the modules, apache runs a syntax check on the configuration files which prints out "Syntax OK" if everything is fine. However, this message doesn't seem to be coming from STDOUT or STDERR as it shows even if all output is redirected to /dev/null. i.e. $ sudo apache2ctl -M Loaded Modules: core_module (static) log_config_module (static) ... Syntax OK $ sudo apache2ctl -M >/dev/null Syntax OK How is this being outputted, and is it possible to hide?

  Read the article

• Check if current Command Prompt was launched as the Administrator

  - by Canadian Luke

  I am looking to write a script that takes user input, then makes system wide changes. I need this to be very generic, but simply put, at the top, I need it to check to see if it's being run 'As an Administrator'. If it's not, then I want to display a message to tell them that; if it is, I want it to continue on. Is there a constant way to verify this? I am not looking to start a new session as the Administrator, I just want to detect if it's currently run as admin

  Read the article

• Remote desktop connection drops before login can appear

  - by Keatly

  Hi Everyone, Someone asked this question a few months ago and I have the exact same problem. I have tried all of the suggested solutions in the other posting (in particular reinstalling the video card on the server), but have not had any luck. I have gone through this troubleshooting guide in detail with no results: http://theillustratednetwork.mvps.org/RemoteDesktop/RemoteDesktopSetupandTroubleshooting.html I have a client with Remote Desktop enabled that I can't connect to in our local network. When I enter in the machine ip/port in the connect box and hit Connect, it briefly gives the normal "Connecting..." dialog box. However, after 2 seconds it just drops. No error message, nothing. Just disappears as if nothing was happening. •Windows XP SP3 •Windows firewall is open for 3389TCP •Machine is on a domain •RDP is enabled in My Computer •User is a local admin I have loads of other machines on the same domain with the same GPO that work fine. Any ideas?

  Read the article

• Forcing the from address when postfix relays over smtp

  - by John Whitlock

  I'm trying to get email reports from our AWS EC2 instances. We're using Exchange Online (part of Microsoft Online Services). I've setup a user account specifically for SMTP relaying, and I've setup Postfix to meet all the requirements to relay messages through this server. However, Exchange Online's SMTP server will reject messages unless the From address exactly matches the authentication address (the error message is 550 5.7.1 Client does not have permissions to send as this sender). With careful configuration, I can setup my services to send as this user. But I'm not a huge fan of being careful - I'd rather have postfix force the issue. Is there a way to do this?

  Read the article

• Access Denied on LAN IIS Access via Integrated Authentication

  - by Pharao2k

  I have an IIS 7.5 (Win2k8R2) Webserver, which publishes an UNC Share (on a Fileserver) with restricted access. The AppPool Identity is a Domain User-Account with read access to mentioned UNC path. Authentication modes are set to Anonymous and Integration Authentication. When I access the path via localhost from the Webserver itself, it works, but if I try the Hostname or IP from either the Webserver or a Client, I get three authentication prompts (does not accept my credentials) and a 401.3 Unauthorized error message (but it states that I am logged in as my normal credentials which definitely have access rights to the UNC path and its files). Security Zone is set to Local Intranet. Sysiniternals Process Monitor lists CreateFile operations on the UNC path (and other existing files in it) with Access Denied and Impersonating on the correct credentials. I don't understand why it is not working, it seems to use the correct credentials on every step on the way but fails with is operations.

  Read the article

• Is there a way to get att.net email to stay connected?

  - by Clay Shannon

  My att.net account at home (wireless connection) has been bad for the last several days: I have to hit F5 quite a few times to "unfreeze" it (I can read an email or two, then it freezes, etc.). At work (company LAN) it's even worse: I can connect to the site and see that I have email, but can't open any of the emails - and the screen constantly refreshes (every couple of seconds) with a "Connecting..." message. It apparently connects and disconnects over and over again, but never stays connected long enough to actually access the email. Is there a way either to fix this OR forward my att.net (from home) to my work email address (accessible via MS Outlook)? Or set it up from work using Outlook to pull in my att.net email? I have Outlook 2003 at work.

  Read the article

• Can send to individual users but not when they are in a global distribution list.

  - by Jake

  I am able to send email to individual users but when not when they are in a distribution group. When I do I get this report. The message could not be delivered because the recipient's destination email system is unknown or invalid. Please check the address and try again, or contact your system administrator to verify connectivity to the email system of the recipient. #5.3.1 However, like I said before I can select their name from the GAL and send mail that way. Their email address is exactly the same in both the GAL and distribution group. The only difference is these users have external email addresses. Windows Server 2003 Exchange Server 2003 Outlook 2007 and 2010.

  Read the article

• Flow of packets in network

  - by user58859

  I can't visualize in my mind the network traffic flow. eg. If there are 15 pc's in a LAN When packet goes from router to local LAN, do it passes all the computers? Does it go to the ethernet card of every computer and those computers accept the packet based on their physical address? To which pc the packet will go first? To the nearest to the router? What happens if that first pc captures that packet(though it is not for it)? What happens when a pc broadcast a message? Do it have to generate 14 packets for all the pc's or only one packet reach to all pc's? If it is one packet and captured by first pc, how other pc's can get that? I can't imagine how this traffic is exactly flows? May be my analogy is completely wrong. Can anybody explain me this?

  Read the article

• How to configure ARR - Application Request Routing - to run both as web server and as as a gateway or proxy?

  - by Different111222

  I have this IIS7.5 with ARR installed and configured to reverse proxy to another server which is running IIS7. On that IIS7.5 I have applications and simple websites installed. Since configuring a farm, the local application doesn't run with this error message: 502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server. Is it even possible to run both application and routing (reverse proxy) at the same time?

  Read the article

• Compaq Q2009 monitor display Issues

  - by jasonco

  I have this compaq q2009 monitor 20' inches and I am having display issues. When I turn on the computer the image is displayed fine for a fraction of a second and then the display goes black. If I turn off the monitor and turn it on again the the same thing happens: the image is displayed for a fraction of a second and then goes black. This is odd. I've looked all over the web and I haven't found anything useful (not even in the HP website). So there is no "out of range" or "recommended resolution" message. It just displays and then goes black. I think the resolution is fine because it was working OK until recently and I haven't changed anything in that regard. Any help would be appreciated. Thanks.

  Read the article

• Is error suppression acceptable in role of logic mechanism?

  - by Rarst

  This came up in code review at work in context of PHP and @ operator. However I want to try keep this in more generic form, since few question about it I found on SO got bogged down in technical specifics. Accessing array field, which is not set, results in error message and is commonly handled by following logic (pseudo code): if field value is set output field value Code in question was doing it like: start ignoring errors output field value stop ignoring errors The reasoning for latter was that it's more compact and readable code in this specific case. I feel that those benefits do not justify misuse (IMO) of language mechanics. Is such code is being "clever" in a bad way? Is discarding possible error (for any reason) acceptable practice over explicitly handling it (even if that leads to more extensive and/or intensive code)? Is it acceptable for programming operators to cross boundaries of intended use (like in this case using error handling for controlling output)? Edit I wanted to keep it more generic, but specific code being discussed was like this: if ( isset($array['field']) ) { echo '<li>' . $array['field'] . '</li>'; } vs the following example: echo '<li>' . @$array['field'] . '</li>';

  Read the article

• cron job executing every minute but should be setup to execute every 4 hours.

  - by Frank V

  Note: I've viewed cron: can’t lock /var/run/crond.pid, otherpid may be 3759 but I believe my question is different (but with the same resulting problem.) I'm very new to cron. I setup a script to run a python script every minute to test that everything was working. I did use crontab to accomplish this. It worked great, so I wanted to switch it to run every 4 hour. I changed my * * * * * {...} to * */4 * * * {...} but the job is continues to run every minute. It's been like this for the last hour or so. When I attempt to run cron restart (thinking that would solve the problem), I receive the following error message: cron: can't lock /var/run/crond.pid, otherpid may be 2311: Resource temporarily unavailable Is my cron syntax wrong? And why might I not be able to restart cron?

  Read the article

• nginx conditional Accept header

  - by manu_v

  Some mobile devices send the following incorrect requests to our servers : GET / HTTP/1.0 Accept: User-Agent : xxx The empty Accept header causes our Ruby on Rails server to throw back a 500 error. In Apache, the following directive allows us to rewrite the header before sending it to the application RoR server in order to cope with the broken devices : RequestHeader edit Accept ^$ "*/*" early We're currently setting up nginx, but achieving the same work-around is proving difficult. We are able to set : proxy_set_header Accept */*; However, this seems to have to be done inconditionally. Whenever trying to do : if ($http_accept !~ ".") { proxy_set_header Accept */*; } It complains with the message : "proxy_set_header" directive is not allowed here So, using nginx, how can we set the HTTP Accept header to */* when it is empty before sending the request to the application server ?

  Read the article

• Cannot Join a Domain on VM

  - by arvind0007

  Hi Guys. I have installed Windows 2003 server R2 on a VM. This VM is running on Windows XP PRO. When i try to make this XP Pro PC join the domain on the VM it tries to locate the server and gives me the following error message " The specified network name is no longer available", despite the fact that i can still see this domain on my network. can anyone help with this please. This is the very first time i am trying connecting a client to a VM server so hope am not doing anything wrong.. thanks

  Read the article

• How do I purge or empty Windows Explorer's network username and sharename cache?

  - by Abel

  While troubleshooting a Samba vs Windows Network issue, I noticed that Windows' Explorer remembers login credentials of remote shares, even if you ask it not to. For instance, after accessing a share using \\servername\sharename plus entering username/password and then closing Windows Explorer, adding the same share as a network drive gives the following message, regardless whether the username is the same or not: The network folder specified is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share. Using NET USE does not show the share. After restarting the computer, I have no problems accessing the share using different credentials. But restarting just for testing other credentials is annoying, esp. while troubleshooting. How can I purge this cache, using Windows Vista? Note: using nbtstat -R[R], ipconfig /renew, killing explorer.exe or disabling / re-enabling the network card didn't help.

  Read the article

• Add domain user as local admin in Windows 7 using VPN to connect to domain

  - by kev

  I am rebuilding my work computer from scratch and need to add my domain user as a local admin on my computer. I have successfully added my PC to the domain, but I cannot add my domain user account to the local admins. I have tried to do the following: Connect to the work domain using a Windows VPN Add my computer to the work domain Start right click on Computer Manage - go to Users and Groups right click on Administrators group and add my domain user The problem is that after adding my domain user to the Administrators group, I don't see my domain user under the Local Users group. When I try to log on as my domain user I get the following error message: There are currently no logon servers available to service the logon request Any ideas?

  Read the article

• Asking for Credentials, when requesting shared folders on the server, regularly for domain users?

  - by MFH

  In our network, single domain controller, when some users (members of the domain) request shared folders on the server they are required to enter their credentials, the server is Windows Server 2008 R2, even checking to remember my credentials doesn't work, sometimes it shows this message: "The system has detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you", sometimes it shows different messages, when I try to recreate the case sometimes I failed, I searched Google for it, I didn't find useful results, some talk about kerberos, but we don't use kerberos, this keeps going each day or two, how to overcome this, I don't want these messages to appear to users?

  Read the article

• Linux kernel startup problems: how to analyze?

  - by java.is.for.desktop

  Hello, everyone! After manually updating the kernel from 2.6.33 to 2.6.34 on my OpenSuse 11.2 Notebook, it stops after the message Loading drivers, configuring devices... This stop can be interrupted with Ctrl-C, but when the system enters runlevel 5, no partitions are mounted (but the root partition), many services fail to start, and other strange things are going on. No X11. NOTE: I manually updated the kernel many times before, it worked. Yes, I know, in case of NVidia, the driver has to be recompiled. The question is: How can I analyze the cause of the problem? Doing dmesg gives me soooo much output, I can't "map" it to the output which I see at startup. The output does not contain the string Loading drivers, configuring devices, or similar.

  Read the article

• What is a 'good number' of exceptions to implement for my library?

  - by Fuzz

  I've always wondered how many different exception classes I should implement and throw for various pieces of my software. My particular development is usually C++/C#/Java related, but I believe this is a question for all languages. I want to understand what is a good number of different exceptions to throw, and what the developer community expect of a good library. The trade-offs I see include: More exception classes can allow very fine grain levels of error handling for API users (prone to user configuration or data errors, or files not being found) More exception classes allows error specific information to be embedded in the exception, rather than just a string message or error code More exception classes can mean more code maintenance More exception classes can mean the API is less approachable to users The scenarios I wish to understand exception usage in include: During 'configuration' stage, which might include loading files or setting parameters During an 'operation' type phase where the library might be running tasks and doing some work, perhaps in another thread Other patterns of error reporting without using exceptions, or less exceptions (as a comparison) might include: Less exceptions, but embedding an error code that can be used as a lookup Returning error codes and flags directly from functions (sometimes not possible from threads) Implemented an event or callback system upon error (avoids stack unwinding) As developers, what do you prefer to see? If there are MANY exceptions, do you bother error handling them separately anyway? Do you have a preference for error handling types depending on the stage of operation?

  Read the article

• Subdomain redirect to WWW

  - by manix

  I have the domain example.com and the test.example.com running on apache server. For some reason when I try to visit test.example it is redirected to www.test.example and by consequence a Server not found error is displayed in the browser. Both .htaccess (root and subdomain folder) files are empty. Additional facts I have another subdomain xyz.example.com pointed to public_html/xyz directory with some content inside (index.html with "hello world message") and it works fine if I use xyz.example.com instead of www.xyz.example.com. So, can you help me to point to the right direction in order. I have a vps and I am able to change any file if is required. Below you can find my virtual host configuration. <VirtualHost xx.xxx.xxx:80> ServerName test.example.com ServerAlias www.test.example.com DocumentRoot /home/example/public_html/test ServerAdmin [email protected] UseCanonicalName Off CustomLog /usr/local/apache/domlogs/test.example.com combined CustomLog /usr/local/apache/domlogs/test.example.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." ScriptAlias /cgi-bin/ /home/example/public_html/test/cgi-bin/ # To customize this VirtualHost use an include file at the following location # Include "/usr/local/apache/conf/userdata/std/2/example/test.example.com/*.conf" </VirtualHost>

  Read the article

• Why Outlook 2007 pasted images are larger than original?

  - by Jersey Dude

  I have been using Outlook 2007 for over a year with no image problems. Around September 1st, images that I paste into messages are enlarged in the messages. This happends with WinSnap, the Vista Snipping Tool, or any jpeg pasted into the message I tried jpegs with 96dpi settings w/o sucess I tried different Outlook Format Picture ... and Size ... settings Problem happens with both RTF and HTML messages Attached images are ok Something mysteriously changed and I cannot figure it out. I googled this to death without any success (others have the problem but there is no solution). This is driving me nuts because I snap screenshots all day long ("a picture is worth a thousand words"). Thanks in advance.

  Read the article

• Filesystem to quickly get recent modifications

  - by liori

  Hello, I've got relatively big filesystem (ext4) with lots of small files and I'd like to backup it. Making full backups often is not feasible to me so I want to have a way to make differential/incremental backups (differential preferred). But... this is laptop, and scanning for changed files takes lots of time. My questions: 1) Is it possible to get list of files changed since some date from ext4's journal? I know it wasn't designed with this idea in mind, and it might be too small for bigger timespans, but maybe it is somehow possible? 2) Is it possible to monitor filesystem modifications and maintain a list of changed files reliably? I think I could use inotify, but this might be too slow to monitor full filesystem and might be unreliable. (by reliable I mean either I get all modifications since last backup (and this list is not missing anything) or an error message). Laptop runs Debian unstable.

  Read the article

< Previous Page | 612 613 614 615 616 617 618 619 620 621 622 623  | Next Page >