Search Results

Search found 18372 results on 735 pages for 'microsoft mshtml'.

Page 617/735 | < Previous Page | 613 614 615 616 617 618 619 620 621 622 623 624  | Next Page >

• MIX 2010 Covert Operations Day 1

  - by GeekAgilistMercenary

  Portland Departure - Farewell Stumptown Off I go on a plane from Portland, Oregon to Las Vegas, Nevada for the MIX 2010 Conference.  Before I even boarded the plane I met Paul Gomes a Senior Software Engineer and Andrew Saylor the Director of Business Development.  Both of these SoftSource Employees were en route to MIX themselves.  Being stoked to already be bumping into some top tier people, I bid them adieu and headed for my seat on the plane. I boarded, and had before the boarding opted for an upgrade.  I have to advise that if you get a chance on Alaska to upgrade at the last minute, take it.  It is usually only about $50 bucks or so and the additional space makes working on the ole' laptop actually possible (even on my monstrous 17" laptop).  So take it from me, click that upgrade button and fork over that $50 bucks for anything over an hour flight, the comfort and ability to work is usually worth it! Las Vegas Arrival - Welcome to Sin City Got into Las Vegas and swung out of the airport.  I then, with my comrade Beth attempted to get Internet Access for the next 3 hours.  Las Vegas, is not the most friendly Internet Access town.  I will just say it, I am not sure why any Internet related company (ala Microsoft) would hold a conference here.  There are more than a dozen other cities that would be better. But I digress, I did manage to get Internet Access after checking into the Circus Circus.  Don't ask why I ended up staying here, if you run into me in person, ask then because there is a whole story to it. At this point I started checking out each session further on the MIX10 Site.  There are a number I deemed necessary to check out.  However, you'll have to read my pending entries to see which session I jumped into. With this juncture in time reached, I got a ton of work to wrap up, some code to write and some sleep to get.  Until tomorrow, adieu. For more of my writing, thoughts, and other topics check out my other blog, where the original entry is posted.

  Read the article

• SQL Server PowerShell Provider follows the Version of PowerShell on the Host and other errata

  - by BuckWoody

  There may be some misunderstanding on how the PowerShell Provider for SQL Server works. I’ve written an article or two explaining that you can use PowerShell with SQL Server, without having the SQL Server 2008 (or higher) provider around. After all, PowerShell just uses .NET, and SQL Server “Server Management Objects” or SMO listen to that interface as well. In SQL Server 2008 and higher we created a “MiniShell” for PowerShell that gives you the ability to treat a SQL Server Instance as a drive (called a “Provider” or path or drive) and a few commands (called command-lets). Using these two simple constructs you can move around SQL Server quickly and work with the objects it holds. I read the other day where someone stated that we had “re-compiled” PowerShell, so that you would have version 1.0 from SQL Server and 2.0 on your new server. Not so! Drop to a SQLPS prompt and a PowerShell prompt and type this in each: $PSVersionTable They should return the same value. You can think of a MiniShell as simply a compiled “profile” that gives you those providers and command-lets automatically – that’s all. In fact, you can load the SMO libraries yourself without the SQL Server 2008 Provider anywhere in sight. I do this all the time, since the MiniShell also has other restrictions. Also remember that if you run a PowerShell script as a SQL Agent Job step type (in 2008 and higher) that you’re running under the context of the account that starts Agent – I think most folks know this, but it’s good to keep in mind. There’s a re-written section of Books Online that goes over working with this very nicely – also covers the question “How to I connect to another server using the SQL Server PowerShell Provider” (hint: It’s just CD) and “How do I load all the SMO stuff if I don’t want to use the Provider” and more. Be sure and check out the note at the bottom that explains the firewall exceptions you’ll need to enable to CD to that remote server. Here’s that link: http://msdn.microsoft.com/en-us/library/cc281947.aspx Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Fonts look squashed or stretched in the browser on Ubuntu

  - by Arjun Menon

  Fonts in the browser on Ubuntu look look squashed/stretched compared to Windows/OSX. This image shows exactly what I mean: http://i.stack.imgur.com/suUXX.png I installed msttcorefonts and configured both Chrome & FF to use Microsoft fonts (Arial, Times New Roman) instead of the default ones. While MS fonts made web pages appear a bit different, regardless of what font it was the squashed/stretched look remained. FreeSans looks a little different from Arial, but it too is rendered squashed/stretched like Arial on both FF & Chrome. Opera renders the Wikipedia page differently from FF & Chrome, but the fonts looks squashed/stretched on it as well. I used to run Kubuntu prior to switching to Ubuntu and at some point I managed to get the fonts on Chrome (only Chrome) look exactly like in the image on the left. I have no idea how I did it though. Firefox and Rekonq retained the squashed/stretched look. I had been using Rekonq for a while, then switched to FF. While using both browsers I had done various things to get the fonts to look better on them with no success - like installing MS fonts & configuring both browsers to use them. I then, after some time, installed Chrome and the fonts magically looked perfect on them - just like on right-hand side of the image. In fact, the font smoothing looked better (to my eye) compared to Windows and OSX. All 3 OSes use subtly different font smoothing strategies and the differences stand out. Later, I formatted & installed Ubuntu 12.04. The first thing I did was install msttcorefonts & then install Chrome. To my dismay, the fonts on Chrome looked just as squashed/stretched as it did in Firefox. There's no browser (except Wine Internet Explorer) that renders fonts properly on my Ubuntu setup right now. Fixing this is definitely possible, since I was able to do it on Kubuntu, but apparently it requires some mysterious tweaking. Would anyone be willing to help me out?

  Read the article

• Credentials Not Passed From SharePoint WebPart to WCF Service

  - by Jacob L. Adams

  I have spent several hours trying to resolve this problem, so I wanted to share my findings in case someone else might have the same problem. I had a web part which was calling out to a WCF service on another server to get some data. The code I had was essentially using System.ServiceModel; using System.ServiceModel.Channels; ... var binding = new CustomBinding( new HttpTransportBindingElement { AuthenticationScheme = System.Net.AuthenticationSchemes.Negotiate } ); var endpoint = new EndpointAddress(new Uri("http://someotherserver/someotherservice.svc")); var someOtherService = new SomeOtherServiceClient(binding, endpoint); string result = someOtherService.SomeServiceMethod(); This code would run fine on my local instance of SharePoint 2010 (Windows 7 64-bit). However, when I would deploy it to the testing environment, I would get a yellow screen of death  with the following message: The HTTP request is unauthorized with client authentication scheme 'Negotiate'. The authentication header received from the server was 'Negotiate,NTLM'. I then went through the usual checklist of Windows Authentication problems: Check WCF bindings to make sure authentication is set correctly Check IIS to make sure Windows Authentication is enabled and anonymous authentication was disabled. Check to make sure the SharePoint server trusted the server hosting the WCF service Verify that the account that the IIS application pool is running under has access to the other server I then spend lot of time digging into really obscure IIS, machine.config, and trust settings (as well of lots of time on Google and StackOverflow). Eventually I stumbled upon a blog post by Todd Bleeker describing how to run code under the application pool identity. Wait, what? The code is not already running under application pool identity? Another quick Google search led me to an MSDN page that imply that SharePoint indeed does not run under the app pool credentials by default. Instead SPSecurity.RunWithElevatedPrivileges is needed to run code under the app pool identity. Therefore, changing my code to the following worked seamlessly using System.ServiceModel; using System.ServiceModel.Channels; using Microsoft.SharePoint; ... var binding = new CustomBinding( new HttpTransportBindingElement { AuthenticationScheme = System.Net.AuthenticationSchemes.Negotiate } ); var endpoint = new EndpointAddress(new Uri("http://someotherserver/someotherservice.svc")); var someOtherService = new SomeOtherServiceClient(binding, endpoint); string result; SPSecurity.RunWithElevatedPrivileges(()=> { result = someOtherService.SomeServiceMethod(); });

  Read the article

• Developer – Cross-Platform: Fact or Fiction?

  - by Pinal Dave

  This is a guest blog post by Jeff McVeigh. Jeff McVeigh is the general manager of Performance Client and Visual Computing within Intel’s Developer Products Division. His team is responsible for the development and delivery of leading software products for performance-centric application developers spanning Android*, Windows*, and OS* X operating systems. During his 17-year career at Intel, Jeff has held various technical and management positions in the fields of media, graphics, and validation. He also served as the technical assistant to Intel’s CTO. He holds 20 patents and a Ph.D. in electrical and computer engineering from Carnegie Mellon University. It’s not a homogenous world. We all know it. I have a Windows* desktop, a MacBook Air*, an Android phone, and my kids are 100% Apple. We used to have 2.5 kids, now we have 2.5 devices. And we all agree that diversity is great, unless you’re a developer trying to prioritize the limited hours in the day. Then it’s a series of trade-offs. Do we become brand loyalists for Google or Apple or Microsoft? Do we specialize on phones and tablets or still consider the 300M+ PC shipments a year when we make our decisions on where to spend our time and resources? We weigh the platform options, monetization opportunities, APIs, and distribution models. Too often, I see developers choose one platform, or write to the lowest common denominator, which limits their reach and market success. But who wants to be ?me too”? Cross-platform coding is possible in some environments, for some applications, for some level of innovation—but it’s not all-inclusive, yet. There are some tricks of the trade to develop cross-platform, including using languages and environments that ?run everywhere.” HTML5 is today’s answer for web-enabled platforms. However, it’s not a panacea, especially if your app requires the ultimate performance or native UI look and feel. There are other cross-platform frameworks that address the presentation layer of your application. But for those apps that have a preponderance of native code (e.g., highly-tuned C/C++ loops), there aren’t tons of solutions today to help with code reuse across these platforms using consistent tools and libraries. As we move forward with interim solutions, they’ll improve and become more robust, based, in no small part, on our input. What’s your answer to the cross-platform challenge? Are you fully invested in HTML5 now? What are your barriers? What’s your vision to navigate the cross-platform landscape?  Here is the link where you can head next and learn more about how to answer the questions I have asked: https://software.intel.com/en-us Republished with permission from here. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Intel

  Read the article

• 24 Hours of PASS coming up soon!

  - by Rob Farley

  Massive thanks to all the people that have been shouting about this event already. I’ve seen quite a number of blog posts about it, and rather than listing some and missing others, please assume I’ve noticed your blog and accept my thanks. But in case this is all news to you – the next 24 Hours of PASS event is less than a fortnight away (Sep 20/21)! And there’s lots of info about it at http://www.sqlpass.org/24hours/fall2012/  (Don’t ask why it’s “Fall 2012”. Apparently that’s what this time of year is called in at least two countries. I would call it “Spring”, personally, but do appreciate that it’s “Autumn” in the Northern Hemisphere...) Yes, I blogged about it on the PASS blog a few weeks ago, but haven’t got around to writing about it here yet. As always, 24HOP is going to have some amazing content. But it’s going to be pointing at the larger event, which now less than two months away. That’s right, this 24HOP is the Summit 2012 Preview event. Most of the precon speakers are going to be represented, as are half-day session presenters, quite a few of the Spotlight presenters and some of the Microsoft speakers too. When you look down the list of sessions at http://www.sqlpass.org/24hours/fall2012/SessionsbySchedule.aspx, you’ll find yourself wondering how you can fit them all in. Luckily, that’s not my problem. For me, it’s just about making sure that you can get to hear these people present, and get a taste for the amazing time that you’ll have if you can come to the Summit. I see this 24HOP as the kind of thing that will just drive you crazy if you can’t get to the Summit. There will be so much great content, and every one of these presenters will be delivering even more than this at the Summit itself. If you tune into Jason Strate’s 24HOP session on the Plan Cache and are impressed – well, you can get to a longer session by him on that same topic at the Summit. And the same goes for all of them. If you’re anything like me, you’ll find yourself looking at the Summit schedule, wishing you could get to several presentations for every time slot. So get yourself registered for 24HOP and help yourself make that decision. And if you can’t go to the Summit, tune in anyway. You’ll still learn a lot, and you might just be able to help persuade someone to send you to the Summit after all (before the price goes up after Sep 30).

  Read the article

• TechEd 2010 Day Three: The Database Designer (Isn't)

  - by BuckWoody

  Yesterday at TechEd 2010 here in New Orleans I worked the front-booth, answering general SQL Server questions for the masses. I was actually a little surprised to find most of the questions I got were from folks that wanted to know more about Stream Insight and Master Data Services. In past conferences I've been asked a lot of "free consulting" questions, about problems folks have had from older products. I don't mind that a bit - in fact, I'm always happy to help in any way I can. But this time people are really interested in the new features in the product, and I like that they are thinking ahead, not just having to solve problems in production. My presentation was on "Database Design in an Hour". We had the usual fun, and SideShow Bob made an appearance - I kid you not. The guy in the back of the room looked just like Sideshow Bob, so I quickly held a "bes thair" contest, and he won. Duing the presentation, I explain the tools you can use to design databases. I also explain that the "Database Designer" tool in SQL Server Management Studio (SSMS) isn't truly a desinger - it uses non-standard notation, doesn't have a meta-data dictionary, and worst of all, it works at the physical level. In other words, whatever you do in SSMS will automatically change the field/table/relationship structures in the database. We fixed this in SSMS 2008 and higher by adding an option to block that, but the tool is not a good design function nonetheless. To be fair, no one I know of at Microsoft recommends that it is - but I was shocked to hear so many developers in the room defending it as a good tool. I think the main issue for someone who doesn't have to work with Relational Systems a great deal is that it can be difficult to figure out Foreign Keys. The syntax makes them look "backwards", so it's just easier to grab a field and place it on the table you want to point to. There are options. You can download a couple of free tools (CA has a community edition of ER-WIN, Quest has one, and Embarcadero also has one) and if you design more than one or two databases a year, it may be worth buying a true design tool. For years I used Visio, but we changed it so that it doesn't forward-engineer (create the DDL) any more, so it isn't a true design tool either. So investigate those free and not-so-free tools. You'll find they help you in your job - but stay away from the Database Designer in SSMS. Or I'll send Sideshow Bob over there to straighten you out. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Business Strategy - Google Case Study

  Business strategy defined by SMBTN.com is a term used in business planning that implies a careful selection and application of resources to obtain a competitive advantage in anticipation of future events or trends. In more general terms business strategy is positioning a company so that it has the greatest competitive advantage over others in the markets and industries that they participate in. This process involves making corporate decisions regarding which markets to provide goods and services, pricing, acceptable quality levels, and how to interact with others in the marketplace. The primary objective of business strategy is to create and increase value for all of its shareholders and stakeholders through the creation of customer value. According to InformationWeek.com, Google has a distinctive technology advantage over its competitors like Microsoft, eBay, Amazon, Yahoo. Google utilizes custom high-performance systems which are cost efficient because they can scale to extreme workloads. This hardware allows for a huge cost advantage over its competitors. In addition, InformationWeek.com interviewed Stephen Arnold who stated that Google’s programmers are 50%-100% more productive compared to programmers working for their competitors.  He based this theory on Google’s competitors having to spend up to four times as much just to keep up. In addition to Google’s technological advantage, they also have developed a decentralized management schema where employees report directly to multiple managers and team project leaders. This allows for the responsibility of the technology department to be shared amongst multiple senior level engineers and removes the need for a singular department head to oversee the activities of the department.  This is a unique approach from the standard management style. Typically a department head like a CIO or CTO would oversee the department’s global initiatives and business functionality.  This would then be passed down and administered through middle management and implemented by programmers, business analyst, network administrators and Database administrators. It goes without saying that an IT professional’s responsibilities would be directed by Google’s technological advantage and management strategy.  Simply because they work within the department, and would have to design, develop, and support the high-performance systems and would have to report multiple managers and project leaders on a regular basis. Since Google was established and driven by new and immerging technology, all other departments would be directly impacted by the technology department.  In fact, they would have to cater to the technology department since it is a huge driving for in the success of Google. Reference: http://www.smbtn.com/smallbusinessdictionary/#b http://www.informationweek.com/news/software/linux/showArticle.jhtml?articleID=192300292&pgno=1&queryText=&isPrev=

  Read the article

• Failing report subscriptions

  - by DavidWimbush

  We had an interesting problem while I was on holiday. (Why doesn't this stuff ever happen when I'm there?) The sysadmin upgraded our Exchange server to Exchange 2010 and everone's subscriptions stopped. My Subscriptions showed an error message saying that the email address of one of the recipients is invalid. When you create a subscription, Reporting puts your Windows user name into the To field and most users have no permissions to edit it. By default, Reporting leaves it up to exchange to resolve that into an email address. This only works if Exchange is set up to translate aliases or 'short names' into email addresses. It turns out this leaves Exchange open to being used as a relay so it is disabled out of the box. You now have three options: Open up Exchange. That would be bad. Give all Reporting users the ability to edit the To field in a subscription. a) They shouldn't have to, it should just work. b) They don't really have any business subscribing anyone but themselves. Fix the report server to add the domain. This looks like the right choice and it works for us. See below for details. Pre-requisites: A single email domain name. A clear relationship between the Windows user name and the email address. eg. If the user name is joebloggs, then joebloggs@domainname needs to be the email address or an alias of it. Warning: Saving changes to the rsreportserver.config file will restart the Report Server service which effectively takes Reporting down for around 30 seconds. Time your action accordingly. Edit the file rsreportserver.config (most probably in the folder ..\Program Files[ (x86)]\Microsoft SQL Server\MSRS10_50[.instancename]\Reporting Services\ReportServer). There's a setting called DefaultHostName which is empty by default. Enter your email domain name without the leading '@'. Save the file. This domain name will be appended to any destination addresses that don't have a domain name of their own.

  Read the article

• SQL SERVER – Get 2 of My Books FREE at Koenig Tech Day – Where Technologies Converge!

  - by pinaldave

  As a regular reader of my blog – you must be aware of that I love to write books and talk about various subjects of my book. The founders of Koenig Solutions are my very old friends, I know them for many years. They have been my biggest supporter of my books. Coming weekend they have a technology event at their Bangalore Location. Every attendee of the technology event will get a set of two books worth Rs. 450 – ‘SQL Server Interview Questions And Answers‘ and ‘SQL Wait Stats Joes 2 Pros‘. I am going to cover a couple of topics of the books and present  as well. I am very confident that every attendee will be having a great time. I will be covering following subjects: SQL Server Tricks and Tips for Blazing Fast Performance Slow Running Queries (SQL) are the most common problem that developers face while working with SQL Server. While it is easy to blame the SQL Server for unsatisfactory performance, however the issue often persists with the way queries have been written, and how SQL Server has been set up. The session will focus on the ways of identifying problems that slow down SQL Servers, and tricks to fix them. Developers will walk out with scripts and knowledge that can be applied to their servers, immediately post the session. After the session is over – I will point to what exact location in the book where you can continue for the further learning. I am pretty excited, this is more like book reading but in entire different format. The one day event will cover four technologies in four separate interactive sessions on: Microsoft SQL Server Security VMware/Virtualization ASP.NET MVC Date of the event: Dec 15, 2012 9 AM to 6PM. Location of the event:  Koenig Solutions Ltd. # 47, 4th Block, 100 feet Road, 3rd Floor, Opp to Shanthi Sagar, Koramangala, Bangalore- 560034 Mobile : 09008096122 Office : 080- 41127140 Organizers have informed me that there are very limited seats for this event and technical session based on my book will start at Sharp 9 AM. If you show up late there are chances that you will not get any seats. Registration for the event is a MUST. Please visit this link for further information. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

  Read the article

• Getting up and started with the Windows Phone Developer Tools 7.1 Beta 2

  - by mbcrump

  Windows Phone Developer Tools 7.1 Beta 2 was released on 6/29/2011. Are you ready for it? If not then let my guide help you get your system prepared and go through a few new features. Download links: Web Installer of Windows Phone 7.1 Beta 2 SDK ISO Image of Windows Phone 7.1 Beta 2 SDK - (723 MB) To get started you are going to need to remove the previous version of your Windows Phone Developer Tools 7.1 Beta 1.   This kicks off the process of uninstalling the Beta.   Once it is uninstalled then you are going to want to grab the bits from: http://www.microsoft.com/download/en/details.aspx?id=26648. The only thing your interested in here is the vm_web2.exe.   Make sure before you start that Zune is not running or you will get this error message like this one and have to restart from scratch. Now just go through your normal Install Screens. It should be installed and ready to go: A couple of things to note: 1) When creating a new phone application you now have several new templates to choose from as shown below. I welcome this addition because I’m a firm believer that we need more templates in order to get more people started. 2) Once you select an application template you can now pick which version of the Windows Phone platform that you wish to target: 3) If you created a WP7 7.1 Beta 1 project that it will still work properly in WP7 7.1 Beta 2. 4) You now have access to the search app icon. Once pressed then you will see something like this: 5) Under Settings –> Applications. You now have background tasks. 6) You will notice that the Web Browser looks a little different with the URL now located at the bottom of the screen and completely removing the “add”, “favorites” and “tabs” icon. Those icons are now moved to the menu bar.   That is it for my “Getting up and going with the Windows Phone Developer Tools 7.1 Beta 2”. I hope you enjoyed it and please feel free to subscribe to my feed or follow me on Twitter.   Subscribe to my feed

  Read the article

• How To Disable Individual Plug-ins in Google Chrome

  - by The Geek

  Have you ever wondered how to disable useless or insecure browser plug-ins in Google Chrome? Here’s the lowdown on how to get rid of Java, Acrobat, Silverlight, and the rest of the plugins you probably want to get rid of. Disabling Plugins in Google Chrome If you head to about:plugins in your address bar, you’ll probably see a list of plugins, but won’t be able to disable them yet. What you’ll need to do is switch over to the Dev channel of Chrome, which gives you access to all the latest features—though you might be warned that sometimes the dev channel might be less stable than the release or beta channels. Ready to proceed? Head to the Dev Channel page, and then click the link to run the installer. You’ll be prompted to restart Chrome when you’re done. Note that Mac and Windows users can both run an installer to switch. Linux users will have to install a package. Note: Once you’ve switched to the Dev channel, you can’t really switch to the stable channel. You’ll have to uninstall Chrome and then reinstall the regular version. Now that you’ve switched to the dev channel and restarted your browser, head to about:plugins in the address bar, and then just disable each plugin you really don’t need. Plugins you can generally live without?  Java, Acrobat, Microsoft Office, Windows Presentation Foundation, Silverlight. These will be on a case-by-case basis, of course, but the vast majority of large websites don’t require any of those. When it comes right down to it, the only plugin that most people require is Flash… and leave the “Default Plug-in” alone too. Special thanks to @jordanconway for pointing out the solution. Similar Articles Productive Geek Tips Disable YouTube Comments while using ChromeHow to Make Google Chrome Your Default BrowserSubscribe to RSS Feeds in Chrome with a Single ClickAdd Notes to Google Notebook from ChromeAccess Google Chrome’s Special Pages the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool Download Free iPad Wallpapers at iPad Decor Get Your Delicious Bookmarks In Firefox’s Awesome Bar

  Read the article

• ODI 11g - Cleaning control characters and User Functions

  - by David Allan

  In ODI user functions have a poor name really, they should be user expressions - a way of wrapping common expressions that you may wish to reuse many times - across many different technologies is an added bonus. To illustrate look at the problem of how to remove control characters from text. Users ask these types of questions over all technologies - Microsoft SQL Server, Oracle, DB2 and for many years - how do I clean a string, how do I tokenize a string and so on. After some searching around you will find a few ways of doing this, in Oracle there is a convenient way of using the TRANSLATE and REPLACE functions. So you can convert some text using the following SQL; replace( translate('This is my string'||chr(9)||' which has a control character', chr(3)||chr(4)||chr(5)||chr(9), chr(3) ), chr(3), '' ) If you had many columns to perform this kind of transformation on, in the Oracle database the natural solution you'd go to would be to code this as a PLSQL function since you don't want the code splattered everywhere. Someone tells you that there is another control character that needs added equals a maintenance headache. Coding it as a PLSQL function will incur a context switch between SQL and PLSQL which could prove costly. In ODI user functions let you capture this expression text and reference it many times across your mappings. This will protect the expression from being copy-pasted by developers and make maintenance much simpler - change the expression definition in one place. Firstly define a name and a syntax for the user function, I am calling it UF_STRIP_BAD_CHARACTERS and it has one parameter an input string;  We then can define an implementation for each technology we will use it, I will define Oracle's using the inputString parameter and the TRANSLATE and REPLACE functions with whatever control characters I want to replace; I can then use this inside mapping expressions in ODI, below I am cleaning the ENAME column - a fabricated example but you get the gist.  Note when I use the user function the function name remains in the text of the mapping, the actual expression is not substituted until I generate the scenario. If you generate the scenario and export the scenario you can have a peak at the code that is processed in the runtime - below you can see a snippet of my export scenario;  That's all for now, hopefully a useful snippet of info.

  Read the article

• WPF: Reloading app parts to handle persistence as well as memory management.

  - by Ingó Vals

  I created a app using Microsoft's WPF. It mostly handles data reading and input as well as associating relations between data within specific parameters. As a total beginner I made some bad design decision ( not so much decisions as using the first thing I got to work ) but now understanding WPF better I'm getting the urge to refactor my code with better design principles. I had several problems but I guess each deserves it's own question for clarity. Here I'm asking for proper ways to handle the data itself. In the original I wrapped each row in a object when fetched from database ( using LINQ to SQL ) somewhat like Active Record just not active or persistence (each app instance had it's own data handling part). The app has subunits handling different aspects. However as it was setup it loaded everything when started. This creates several problems, for example often it wouldn't be neccesary to load a part unless we were specifically going to work with that part so I wan't some form of lazy loading. Also there was problem with inner persistance because you might create a new object/row in one aspect and perhaps set relation between it and different object but the new object wouldn't appear until the program was restarted. Persistance between instances of the app won't be huge problem because of the small amount of people using the program. While I could solve this now using dirty tricks I would rather refactor the program and do it elegantly, Now the question is how. I know there are several ways and a few come to mind: 1) Each aspect of the program is it's own UserControl that get's reloaded/instanced everytime you navigate to it. This ensures you only load up the data you need and you get some persistancy. DB server located on same LAN and tables are small so that shouldn't be a big problem. Minor drawback is that you would have to remember the state of each aspect so you wouldn't always start at beginners square. 2) Having a ViewModel type object at the base level of the app with lazy loading and some kind of timeout. I would then propegate this object down the visual tree to ensure every aspect is getting it's data from the same instance 3) Semi active record data layer with static load methods. 4) Some other idea What in your opinion is the most practical way in WPF, what does MVVM assume?

  Read the article

• Split Internet Explorer into Dual-Panes

  - by Asian Angel

  If you have a wide screen monitor then you may want to make better use of Internet Explorer’s browser window area. Now you can split the browser window into dual-panes as needed with the IE Split browser plugin. Note: Requires .NET Framework 2.0 or higher (link provided below). IE Split in Action If you are using an older version of this software here is something to keep in mind before upgrading to the 2.0 release. Once you have installed IE Split you will notice a new toolbar added to your browser. As seen here, you can condense it down tightly and access it using the drop-down bar. A closer look at the drop-down bar. Notice the address bar…this will be for the left pane when you split the browser window. Here is our browser split into dual-panes. There are two address bars and two tab/title bars each corresponding to their appropriate pane. It may look slightly backwards at first but is not hard to get used to. A better view of the left pane with the IE Split navigation & title bars showing. Note: The title bar can be hidden if desired. And the right pane. You can also have multiple “split” tabs open if needed. There is nothing quite like getting double the value for the same amount of space. When you no longer need dual-panes open just click on the “x” to close IE Split down. All back to normal again. Conclusion While might not be for everyone this can still be useful for those who need side-by-side access to websites without using multiple separate windows. Links Download IE-Split Download the Microsoft .NET Framework 4 (Standalone Installer) Similar Articles Productive Geek Tips Set Up Multi-Pane Viewing in FirefoxWhy Can’t I Turn the Details/Preview Panes On or Off in Windows Vista Explorer?Split a text file in half (or any percentage) on Ubuntu LinuxMysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPMake Ctrl+Tab in Internet Explorer 7 Use Most Recent Order TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like)

  Read the article

• Archbeat Link-O-Rama Top 10 Facebook Faves for October 20-26, 2013

  - by OTN ArchBeat

  What are the 4,460 fans of the OTN ArchBeat Facebook Page talking about? The list below represents the Top 10 most popular articles, blog posts, and other content from across the community. Enterprise Grade Deployment Considerations for Oracle Identity Manager AD Connector | Firdaus Fraz Oracle Fusion Middleware solution architect Firdaus Fraz illustrates provides best practice recommendations for setting up an enterprise deployment environment for the OIM connector for Microsoft Active Directory. A Roadmap for SOA Development and Delivery | Mark Nelson Do you know the way to S-O-A? Mark Nelson does. His latest blog post, part of an ongoing series, will help to keep you from getting lost along the way. The road ahead for WebLogic 12c | Edwin Biemond Oracle ACE Edwin Biemond shares his thoughts on announced new features in Oracle WebLogic 12.1.3 & 12.1.4 and compares those upcoming releases to Oracle WebLogic 12.1.2. Oracle GoldenGate 12c - New Release, New Features | Michael Rainey Rittman Mead's Michael Rainey takes you on guided tour through the GoldenGate 12c features that "are relevant to data warehouse and data migration work we typically see in the business intelligence world." Reproducing WebLogic Stuck Threads with ADF CreateInsert Operation and ORDER BY Clause | Andrejus Baranovsikis Another post from Oracle ACE Director Andrejus Baranovsikis on dealing with WebLogic Stuck Threads. This one includes a test case application you can download. The Impact of SaaS - The Times They Are A-Changin' | Floyd Teter Oracle ACE Director Floyd Teter shares some truly interesting insight gained in conversations with three Fortune 500 CIOs. Configure Oracle Identity Manager AD/LDAP Authentication | Arda Eralp A step-by-step how-to from a member of the Fusion Middleware Applications Consultancy team. Java-Powered Robot Named NAO Wows Crowds | Tori Wieldt Tori Wieldt interviews a robot and human. Updated ODI Statement of Direction | Robert Schweighardt Heads up Oracle Data Integrator fans! A new product statement of direction document is available, offering "an overview of the strategic product plans for Oracle’s data integration products for bulk data movement and transformation, specifically Oracle Data Integrator (ODI) and Oracle Warehouse Builder (OWB)." Oracle BI Apps 11.1.1.7.1 – GoldenGate Integration - Part 2: Setup and Configuration | Michael Rainey Michael Rainey continues his series with another technical article for you GoldenGate fans. Thought for the Day "Intuition will tell the thinking mind where to look next." — Jonas Salk, American medical researcher and virologist (October 28, 1914 – June 23, 1995) Source: brainyquote.com

  Read the article

• Oracle Tutor: *** CAUTION to Word .docx Users ***

  - by [email protected]

  Microsoft released a security update KB969604 for Office 2007 (around June 2009) This update causes document variables within Word docx files to be scrambled. This update might still be pushed out via Office 2007 updates DO NOT save files as docx using MS OFFICE 2007 until you apply the MS hotfix # 970942 available here If you are using Windows XP with Office 2003 or Office 2000 and have installed an older Office 2007 compatibility pack, documents saved as docx may also cause the scrambled document variables. Installing the 2007 compatibility pack published on 1/6/2010 (version 4) will prevent the document variables from becoming corrupt. Those on Windows 2000 may not be able to install the latest compatibility pack, or the compatibility pack may not function properly. This situation will hopefully be rectified in the coming months. What is a document variable? Document variables store data inside the document, invisible to the user. The Tutor software uses them when converting the document to HTML and when creating the flowchart, just to name a couple of uses. How will you know if a document's variables are scrambled? The difficulty in diagnosing the issue is that the symptoms can take myriad forms. There isn't a single error message or a single feature that one can point to and say, "test for the problem by doing this." The best clue about the error is seeing any kind of string in an error message that has garbage characters, question marks, xml code snippets, or just nonsense. Such as "Language ?????????????xlr;lwlerkjl could not be found." It is also possible to see the corrupted data in the footers of the Word docs. And, just because the footers look correct does not mean that the document variables are not corrupted. The corruption problem does not occur in every document variable in the document, just some of them. Often it is less than a quarter of them. What is the difference between docx files and doc files? Office 2007 uses Office Open XML formats with .docx and .docm filename extensions. - Docx is an Office Open XML word document. - Docm is a macro enabled Office Open XML document. This means the file structure behind the scenes is quite different from the binary file formats used prior to Office 2007 such as .doc, .dot, .xls, and .ppt. Solution Summary: For Windows XP and Word 2007: Install the hotfix, or save files as *.doc For Windows XP and Word 2000 and 2003: Install the latest compatibility pack or save files as *.doc For Windows 2000 with Word 2000 or 2003, do not use any compatibility pack, save files as *.doc Emily Chorba Principle Product Manager for Oracle Tutor

  Read the article

• Accessing SSRS Report Manager on Windows 7 and Windows 2008 Server

  - by Testas

    Here is a problem I was emailed last night   Problem   SSRS 2008 on Windows 7 or Windows 2008 Server is configured with a user account that is a member of the administrator's group that cannot access report Manager without running IE as Administrator and adding  the SSRS server into trusted sites. (The Builtin administrators account is by default made a member of the System Administrator and Content Manager SSRS roles).   As a result the OS limits the use of using elevated permissions by removing the administrator permissions when accessing applications such as SSRS     Resolution - Two options   Continue to run IE as administrator, you must still add the report server site to trusted sites Add the site to trusted sites and manually add the user to the system administrator and content manager role Open a browser window with Run as administrator permissions. From the Start menu, click All Programs, right-click Internet Explorer, and select Run as administrator. Click Allow to continue. In the URL address, enter the Report Manager URL. Click Tools. Click Internet Options. Click Security. Click Trusted Sites. Click Sites. Add http://<your-server-name>. Clear the check box Require server certification (https:) for all sites in this zone if you are not using HTTPS for the default site. Click Add. Click OK. In Report Manager, on the Home page, click Folder Settings. In the Folder Settings page, click Security. Click New Role Assignment. Type your Windows user account in this format: <domain>\<user>. Select Content Manager. Click OK. Click Site Settings in the upper corner of the Home page. Click security. Click New Role Assignment. Type your Windows user account in this format: <domain>\<user>. Select System Administrator. Click OK. Close Report Manager. Re-open Report Manager in Internet Explorer, without using Run as administrator.   Problems will also exist when deploying SSRS reports from Business Intelligence Development Studio (BIDS) on Windows  7 or Windows 2008, therefore you should run Business Intelligence Development Studio as Administor   information on this issue can be found at <http://msdn.microsoft.com/en-us/library/bb630430.aspx>

  Read the article

• So, what&rsquo;s your blog URL?

  - by johndoucette

  Asked by many of my colleagues often enough, I decided to take the plunge and begin blogging. After many attempts to start and long discussions about what I should write about, I decided to give my “buddies” a series of lessons and tidbits to help them understand what it takes to manage a software development project in the real world. Stories of success and failure to keep hope alive. I am formally trained as a developer (BS/CS) and have scattered my code throughout the matrix since 1985 (officially working for the man). As I moved from job-to-job over my career, I have had good managers, bad ones, and ones who were – well, just sitting in the corner office. It wasn't until I began the transition and commitment to the role of project management that I began to take real software development management seriously. A boss once told me “put down the code. Start managing the people and process.” That was a scary time in my career. I loved solving really cool problems with a blank sheet of paper. It was an adrenaline rush to get an opportunity to start from scratch and write an application solution people would actually use and help them in their work/business. I felt that moving into “management” would remove me from the thrill and ownership I felt as a developer. It was a hard step to take, and one which I believe is hard for any developer. Well, I am here to help you through this transition. For those of you wanting to read my stories or learn about the tools and techniques I use on a daily basis, you too might just learn something you would have never thought of as an architect/developer. I am currently a Sr. Consultant at Magenic with the Boston branch office and primarily work with clients in the New England area. I am typically engaged as the lead project manager on our engagements, but also perform Application Lifecycle Management (ALM) assessments for development organizations as well as augment the Technical Evangelists for Microsoft and perform many Team Foundation Server (TFS) demos, installs and “get started” engagements. I have spoken at the New England Code Camp, our most recent CodeMastery event in Boston, and have written several whitepapers.   I am looking forward to helping you “Put down the code.” John Doucette

  Read the article

• How can I attach a model to the bone of another model?

  - by kaykayman

  I am trying to attach one animated model to one of the bones of another animated model in an XNA game. I've found a few questions/forum posts/articles online which explain how to attach a weapon model to the bone of another model (which is analogous to what I'm trying to achieve), but they don't seem to work for me. So as an example: I want to attach Model A to a specific bone in Model B. Question 1. As I understand it, I need to calculate the transforms which are applied to the bone on Model B and apply these same transforms to every bone in Model A. Is this right? Question 2. This is my code for calculating the Transforms on a specific bone. private Matrix GetTransformPaths(ModelBone bone) { Matrix result = Matrix.Identity; while (bone != null) { result = result * bone.Transform; bone = bone.Parent; } return result; } The maths of Matrices is almost entirely lost on me, but my understanding is that the above will work its way up the bone structure to the root bone and my end result will be the transform of the original bone relative to the model. Is this right? Question 3. Assuming that this is correct I then expect that I should either apply this to each bone in Model A, or in my Draw() method: private void DrawModel(SceneModel model, GameTime gametime) { foreach (var component in model.Components) { Matrix[] transforms = new Matrix[component.Model.Bones.Count]; component.Model.CopyAbsoluteBoneTransformsTo(transforms); Matrix parenttransform = Matrix.Identity; if (!string.IsNullOrEmpty(component.ParentBone)) parenttransform = GetTransformPaths(model.GetBone(component.ParentBone)); component.Player.Update(gametime.ElapsedGameTime, true, Matrix.Identity); Matrix[] bones = component.Player.GetSkinTransforms(); foreach (SkinnedEffect effect in mesh.Effects) { effect.SetBoneTransforms(bones); effect.EnableDefaultLighting(); effect.World = transforms[mesh.ParentBone.Index] * Matrix.CreateRotationY(MathHelper.ToRadians(model.Angle)) * Matrix.CreateTranslation(model.Position) * parenttransform; effect.View = getView(); effect.Projection = getProjection(); effect.Alpha = model.Opacity; } } mesh.Draw(); } I feel as though I have tried every conceivable way of incorporating the parenttransform value into the draw method. The above is my most recent attempt. Is what I'm trying to do correct? And if so, is there a reason it doesn't work? The above Draw method seems to transpose the models x/z position - but even at these wrong positions, they do not account for the animation of Model B at all. Note: As will be evident from the code my "model" is comprised of a list of "components". It is these "components" that correspond to a single "Microsoft.Xna.Framework.Graphics.Model"

  Read the article

• Creating a Strong Bridge to the Post PC World

  - by Webgui

  Moving from location to location requires strong roads.  When crossing a barrier though, like a body of water or valley, we are required to build a strong bridge to get us from point A to point B in a way that is fast, safe, and easy.Yet we are not talking here about driving a car or riding a bus.  As we in the computing world are evidencing the move to the post-PC era, modernizing and migrating legacy applications to harness the power of HTML5 web, cloud and mobile is one of the most difficult challenges enterprises have faced.  Constant technological changes have weakened the business value of legacy systems, which have been developed over the years through huge investments.  There are several risks of course in this move.  Do you choose to simply rewrite code of legacy apps and transform them to HTML5 one by one?  This is quite expensive (according to research firm Gartner, the cost is $6 - $26 per line of code).  Of course, the pace of the rewriting process is very slow – around 170 lines per day for each developer – which slows down business productivity in a world in which no organization can afford to fall behind.  Other questions include whether the new cloud-based apps will have the same functionality as the trusted applications that worked for you for years.  How will the user experience be affected?  And of course, what about data security?  So we are faced with the challenge of building a sturdy bridge to stabilize our move in order to allow us to confidently and easily move our legacy applications into the post-PC era.   We at Gizmox are excited to release the first downloadable Community Technology Preview (CTP) of our Instant CloudMove Transposition Studio.Developers: To download the tool, and try it out for yourself, please visit http://www.visualwebgui.com/download.aspx.The CTP is the first and only tool-based solution allowing any Microsoft Visual Studio developer to extend VB6 and .NET enterprise client/server applications into HTML5 web, cloud and mobile applications, including the ability to upgrade their code and UI while doing so.   It is the only solution to fully replicate enterprise desktop applications behavior in the post-PC era.  With Instant CloudMove, the transposed application is available on any mobile or tablet device, browser and across any client operating system. Moreover, the extended application logic and data remains on the server behind the fire-wall and therefore the application’s front end is secured-by-design.   We would love for you to try out the tool for yourselves and let us know what you think.  How are you finding the move?

  Read the article

• Regular Expression Transformation

  The regular expression transformation exposes the power of regular expression matching within the pipeline. One or more columns can be selected, and for each column an individual expression can be applied. The way multiple columns are handled can be set on the options page. The AND option means all columns must match, whilst the OR option means only one column has to match. If rows pass their tests then rows are passed down the successful match output. Rows that fail are directed down the alternate output. This transformation is ideal for validating data through the use of regular expressions. You can enter any expression you like, or select a pre-configured expression within the editor. You can expand the list of pre-configured expressions yourself. These are stored in a Xml file, %ProgramFiles%\Microsoft SQL Server\nnn\DTS\PipelineComponents\RegExTransform.xml, where nnn represents the folder version, 90 for 2005, 100 for 2008 and 110 for 2012. If you want to use regular expressions to manipulate data, rather than just validating it, try the RegexClean Transformation. The component is provided as an MSI file, however for 2005/200 you will have to add the transformation to the Visual Studio toolbox by hand. This process has been described in detail in the related FAQ entry for How do I install a task or transform component?, just select Regular Expression Transformation in the Choose Toolbox Items window. Downloads The Regular Expression Transformation is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Regular Expression Transformation for SQL Server 2005 Regular Expression Transformation for SQL Server 2008 Regular Expression Transformation for SQL Server 2012 Version History SQL Server 2012Version 2.0.0.87 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008Version 2.0.0.87 - Release for SQL Server 2008 Integration Services. (10 Oct 2008) SQL Server 2005 Version 1.1.0.93 - Added option for you to choose AND or OR logic when multiple columns have been selected. Previously behaviour was OR only. (31 Jul 2008) Version 1.0.0.76 - Installer update and improved exception handling. (28 Jan 2008) Version 1.0.0.41 - Update for user interface stability fixes. (2 Aug 2006) Version 1.0.0.24 - SQL Server 2005 RTM Refresh. SP1 Compatibility Testing. (12 Jun 2006) Version 1.0.0.9 - Public Release for SQL Server 2005 IDW 15 June CTP (29 Aug 2005) Screenshots  

  Read the article

• Library to fake intermittent failures according to tester-defined policy?

  - by crosstalk

  I'm looking for a library that I can use to help mock a program component that works only intermittently - usually, it works fine, but sometimes it fails. For example, suppose I need to read data from a file, and my program has to avoid crashing or hanging when a read fails due to a disk head crash. I'd like to model that by having a mock data reader function that returns mock data 90% of the time, but hangs or returns garbage otherwise. Or, if I'm stress-testing my full program, I could turn on debugging code in my real data reader module to make it return real data 90% of the time and hang otherwise. Now, obviously, in this particular example I could just code up my mock manually to test against a random() routine. However, I was looking for a system that allows implementing any failure policy I want, including: Fail randomly 10% of the time Succeed 10 times, fail 4 times, repeat Fail semi-randomly, such that one failure tends to be followed by a burst of more failures Any policy the tester wants to define Furthermore, I'd like to be able to change the failure policy at runtime, using either code internal to the program under test, or external knobs or switches (though the latter can be implemented with the former). In pig-Java, I'd envision a FailureFaker interface like so: interface FailureFaker { /** Return true if and only if the mocked operation succeeded. Implementors should override this method with versions consistent with their failure policy. */ public boolean attempt(); } And each failure policy would be a class implementing FailureFaker; for example there would be a PatternFailureFaker that would succeed N times, then fail M times, then repeat, and a AlwaysFailFailureFaker that I'd use temporarily when I need to simulate, say, someone removing the external hard drive my data was on. The policy could then be used (and changed) in my mock object code like so: class MyMockComponent { FailureFaker faker; public void doSomething() { if (faker.attempt()) { // ... } else { throw new RuntimeException(); } } void setFailurePolicy (FailureFaker policy) { this.faker = policy; } } Now, this seems like something that would be part of a mocking library, so I wouldn't be surprised if it's been done before. (In fact, I got the idea from Steve Maguire's Writing Solid Code, where he discusses this exact idea on pages 228-231, saying that such facilities were common in Microsoft code of that early-90's era.) However, I'm only familiar with EasyMock and jMockit for Java, and neither AFAIK have this function, or something similar with different syntax. Hence, the question: Do such libraries as I've described above exist? If they do, where have you found them useful? If you haven't found them useful, why not?

  Read the article

• Unit Testing with NUnit and Moles Redux

  - by João Angelo

  Almost two years ago, when Moles was still being packaged alongside Pex, I wrote a post on how to run NUnit tests supporting moled types. A lot has changed since then and Moles is now being distributed independently of Pex, but maintaining support for integration with NUnit and other testing frameworks. For NUnit the support is provided by an addin class library (Microsoft.Moles.NUnit.dll) that you need to reference in your test project so that you can decorate yours tests with the MoledAttribute. The addin DLL must also be placed in the addins folder inside the NUnit installation directory. There is however a downside, since Moles and NUnit follow a different release cycle and the addin DLL must be built against a specific NUnit version, you may find that the release included with the latest version of Moles does not work with your version of NUnit. Fortunately the code for building the NUnit addin is supplied in the archive (moles.samples.zip) that you can found in the Documentation folder inside the Moles installation directory. By rebuilding the addin against your specific version of NUnit you are able to support any version. Also to note that in Moles 0.94.51023.0 the addin code did not support the use of TestCaseAttribute in your moled tests. However, if you need this support, you need to make just a couple of changes. Change the ITestDecorator.Decorate method in the MolesAddin class: Test ITestDecorator.Decorate(Test test, MemberInfo member) { SafeDebug.AssumeNotNull(test, "test"); SafeDebug.AssumeNotNull(member, "member"); bool isTestFixture = true; isTestFixture &= test.IsSuite; isTestFixture &= test.FixtureType != null; bool hasMoledAttribute = true; hasMoledAttribute &= !SafeArray.IsNullOrEmpty( member.GetCustomAttributes(typeof(MoledAttribute), false)); if (!isTestFixture && hasMoledAttribute) { return new MoledTest(test); } return test; } Change the Tests property in the MoledTest class: public override System.Collections.IList Tests { get { if (this.test.Tests == null) { return null; } var moled = new List<Test>(this.test.Tests.Count); foreach (var test in this.test.Tests) { moled.Add(new MoledTest((Test)test)); } return moled; } } Disclaimer: I only tested this implementation against NUnit 2.5.10.11092 version. Finally you just need to run the NUnit console runner through the Moles runner. A quick example follows: moles.runner.exe [Tests.dll] /r:nunit-console.exe /x86 /args:[NUnitArgument1] /args:[NUnitArgument2]

  Read the article

• SCVMM – Round 2 – How to create a Private Cloud using PowerShell

  - by Waclaw Chrabaszcz

  Originally posted on: http://geekswithblogs.net/Wchrabaszcz/archive/2013/06/28/scvmm--round-2--how-to-create-a-private.aspxHave you ever seen "A Bridge too far" movie? To not to wake up a click too far, it is good to script some tasks. Yes of course we can follow wizards, but some of us want to be warriorsJ. A small tip, take a look on credentials and system GUID examples. I don't know how about you, but for me it will be really useful in the future.    # credents$credential = Get-CredentialNew-SCRunAsAccount -Name "TESTDOMAIN\Administrator" -Credential $credential #storage $opsMgrServerCredential = Get-SCRunAsAccount -Name "TESTDOMAIN\Administrator"New-SCStorageClassification -Name "Bronze" -Description "" –RunAsynchronouslyNew-SCStorageClassification -Name "Silver" -Description "" –RunAsynchronouslyNew-SCStorageClassification -Name "Gold" -Description "" –RunAsynchronously # add a shared storageFind-SCComputer -ComputerName "dc.TESTDOMAIN.net"Add-SCStorageProvider -AddWindowsNativeWmiProvider -Name "dc.TESTDOMAIN.net" -RunAsAccount $opsMgrServerCredential -ComputerName "dc.TESTDOMAIN.net"$fileServer = Get-SCStorageFileServer "dc.TESTDOMAIN.net"$fileShares = @()$fileShares += Get-SCStorageFileShare -Name "VMMLibrary"Set-SCStorageFileServer -StorageFileServer $fileServer -AddStorageFileShareToManagement $fileShares –RunAsynchronously #fabric network$logicalNetwork = New-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network" -LogicalNetworkDefinitionIsolation $false -EnableNetworkVirtualization $true -UseGRE $true -IsPVLAN $false$allHostGroups = @()$allHostGroups += Get-SCVMHostGroup -Name "All Hosts"$allSubnetVlan = @()$allSubnetVlan += New-SCSubnetVLan -Subnet "10.0.0.0/24" -VLanID 0New-SCLogicalNetworkDefinition -Name "TESTDOMAIN-Service-Network_0" -LogicalNetwork $logicalNetwork -VMHostGroup $allHostGroups -SubnetVLan $allSubnetVlan #IP pool$logicalNetwork = Get-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network"$logicalNetworkDefinition = Get-SCLogicalNetworkDefinition -LogicalNetwork $logicalNetwork -Name "TESTDOMAIN-Service-Network_0" # Gateways$allGateways = @()$allGateways += New-SCDefaultGateway -IPAddress "10.0.0.1" –Automatic# DNS servers $allDnsServer = @("10.0.0.1")# DNS suffixes$allDnsSuffixes = @("TESTDOMAIN.net")# WINS servers$allWinsServers = @()New-SCStaticIPAddressPool -Name "TESTDOMAIN-Service-Network" -LogicalNetworkDefinition $logicalNetworkDefinition -Subnet "10.0.0.0/24" -IPAddressRangeStart "10.0.0.51" -IPAddressRangeEnd "10.0.0.75" -DefaultGateway $allGateways -DNSServer $allDnsServer -DNSSuffix "" -DNSSearchSuffix $allDnsSuffixes –RunAsynchronously #Hyper-V Virtual Networks$logicalNetwork = Get-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network" $vmNetwork = New-SCVMNetwork -Name "TESTDOMAIN-VMN" -LogicalNetwork $logicalNetwork -IsolationType "WindowsNetworkVirtualization" -CAIPAddressPoolType "IPV4" -PAIPAddressPoolType "IPV4"Write-Output $vmNetwork$subnet = New-SCSubnetVLan -Subnet "10.0.0.0/24"New-SCVMSubnet -Name "Con-SN" -VMNetwork $vmNetwork -SubnetVLan $subnet # bind VLAN with the Network Adapter$vmHost = Get-SCVMHost -ComputerName "VMM01.TESTDOMAIN.net"$vmHostNetworkAdapter = Get-SCVMHostNetworkAdapter -VMHost $vmHost #-Name "Intel 21140-Based PCI Fast Ethernet Adapter (Emulated)"Set-SCVMHostNetworkAdapter -VMHostNetworkAdapter $vmHostNetworkAdapter -Description "" -AvailableForPlacement $true -UsedForManagement $true $logicalNetwork = Get-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network" Set-SCVMHostNetworkAdapter -VMHostNetworkAdapter $vmHostNetworkAdapter -AddOrSetLogicalNetwork $logicalNetworkSet-SCVMHost -VMHost $vmHost -RunAsynchronously -NumaSpanningEnabled $true #Create a Private Cloud$Guid = [System.Guid]::NewGuid()Set-SCCloudCapacity -JobGroup $Guid -UseCustomQuotaCountMaximum $false -UseMemoryMBMaximum $false -UseCPUCountMaximum $false -UseStorageGBMaximum $false -UseVMCountMaximum $false -CustomQuotaCount 10 -MemoryMB 10240 -CPUCount 10 -StorageGB 386 -VMCount 10$resources = @()$resources += Get-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network"$resources += Get-SCLoadBalancer -Manufacturer "Microsoft"$readonlyLibraryShares = @()$readonlyLibraryShares += Get-SCLibraryShare | where { $_.LibraryServer.Name -eq "dc.TESTDOMAIN.net" -and $_.Name -eq "VMMLibrary" }$addCapabilityProfiles = @()$addCapabilityProfiles += Get-SCCapabilityProfile -Name "Hyper-V"$Guid2 = [System.Guid]::NewGuid()Set-SCCloud -JobGroup $Guid2 -RunAsynchronously -AddCloudResource $resources -AddReadOnlyLibraryShare $readonlyLibraryShares -AddCapabilityProfile $addCapabilityProfiles$hostGroups = @()$hostGroups += Get-SCVMHostGroup -Name "TESTDOMAIN"New-SCCloud -VMHostGroup $hostGroups -Name "TESTDOMAIN-Cloud" -Description "" –RunAsynchronously

  Read the article

< Previous Page | 613 614 615 616 617 618 619 620 621 622 623 624  | Next Page >