Search Results

Search found 11914 results on 477 pages for 'networking architecture'.

Page 62/477 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• not detecting wireless networks

  - by pac

  i'm a new linux user and i cannot add or edit any network connections, nor is the system detecting any wireless networks when i try to access additional hardware from system, it doesn't even open...so i'm stuck. lspci | grep -i wireless comes out with 06:0a.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network connection (rev 05) lspci -n -s 06:0a.0 comes out with 8086:4220. i dont know if that info was relevant but any help on this would be appreciated.

  Read the article

• Copy hangs in local network

  - by umpirsky

  I want to copy files from one Ubuntu system to another.They are both in local wireless network. I shared entire home dir on one, and tried to copy some files to another. It works for some time and then it just hangs at some point. I use Nautilus to copy files. Here is the example screenshot, it just hangs like this: After I cancel, Nautilus icon in lauchbar keeps progress bar, so I guess there is some problem. What can be the problem?

  Read the article

• Suddely internet is not accessible

  - by user189708

  I am going crazy here. One day everything was working fine. I turned pc off and went to sleep. Next day turn pc on and cannot access internet (from any browser). The situation is: I cannot open any webpage from browser (tried Firefox and Epiphany) and cannot receive emails in thunderbird. BUT if I run firefox from console as sudo, I can use it as usual. I can access Skype and pretty much any other network stuff (like installing software with apt-get etc.), also if I use Astrill VPN software I can access webpages even running without sudo. I haven't install any software or anything like that for several days = I have not a clue what could cause this. Just by the way, other Win PC in our home has no issue. Here is what I have tried to fix this: I have tried to restart my pc, router, modem - multiple times I have tried to change permissions to my firefox profile I have tried to completely re-install firefox and start with blank profile, thus no addons I have tried to change /etc/resolv.conf to an IP of my router (it was 127.0.1.1) I have tried to change my hostname (from tomino-NB to tominoNB) I think I might try even more stuff. None of it works. Can someone please try to help me. Thank you UPDATE 1: I have tried this: Removing resolv.conf - Didn't help Also "ping" and "dig" commands cannot resolve host UPDATE 2: I have tried to edit nameservers in resolv.conf but still no effect. I can ping router as well as I can ping outside IP. So definitely just some DNS issue. Is it possible that something is rewriting path to resolv.conf and using different file? UPDATE 3: I have just restarted PC and everything works now... resolv.conf went back to nameserver 127.0.1.1 . I have no clue what happened that it works again...

  Read the article

• Problem connecting to isp server using xl2tpd as client. Ubuntu server 13.04

  - by Deon Pretorius

  I have followed guides found on google and ubuntu support pages and can get xl2tpd connection up but only under the following conditions: 1 - ADSL model must be configured and connected to the ISP or 2 - ADSL modem in bridge mode I must have an existing PPPoe connection established. If neither of the above are active xl2tpd wont trigger pppd and connect to the isp and thus tunnel connection fails to connect to the L2TP server of the ISP. Am I doing something wrong; /etc/ppp/options.l2tpd.axxess ipcp-accept-local ipcp-accept-remote refuse-eap refuse-chap require-pap noccp noauth idle 1800 mtu 1200 mru 1200 defaultroute usepeerdns debug lock connect-delay 5000 name (name used for ppp connection) /etc/ppp/pap-secrets # * password (name used for ppp connection as above) * (ppp password supplied by isp) /etc/xl2tpd/xl2tpd.conf [global] ; Global parameters: auth file = /etc/xl2tpd/l2tp-secrets ; * Where our challenge secrets are access control = yes ; * Refuse connections without IP match debug tunnel = yes [lac axxess] lns = 196.30.121.50 ; * Who is our LNS? redial = yes ; * Redial if disconnected? redial timeout = 5 ; * Wait n seconds between redials max redials = 5 ; * Give up after n consecutive failures hidden bit = yes ; * User hidden AVP's? length bit = yes ; * Use length bit in payload? require pap = yes ; * Require PAP auth. by peer require chap = no ; * Require CHAP auth. by peer refuse chap = yes ; * Refuse CHAP authentication require authentication = yes ; * Require peer to authenticate name = BLA85003@axxess ; * Report this as our hostname ppp debug = yes ; * Turn on PPP debugging pppoptfile = /etc/ppp/options.l2tpd.axxess ; * ppp options file for this lac /etc/xl2tpd/l2tp-secrets # Secrets for authenticating l2tp tunnels # us them secret # * marko blah2 # zeus marko blah # * * interop * vzb_l2tp (*** secret supplied by isp) ^ isp server host name Any help will be greatly appreciated

  Read the article

• How can I force the (re)discovery of PulseAudio network sound devices?

  - by Christian

  I'm using the PulseAudio feature of network sound devices (not Multicast/RTP) to play sound from my netbook on the audio equipment connected to the HTPC when at home. This creates a virtual sound device that I can then use instead of the physical built-in one. Most of the time this works just fine. Sometimes however, the virtual sound device just doesn't appear. Disconnecting from and reconnecting to the network helps sometimes but not always and it's annoying and potentially bad for existing TCP connections. So my question basically is: Is there some way to tell PulseAudio "Hey, just look again if you really can't find a network sound device."? Edit: Unloading and reloading the module-zeroconf-discover with pacmd does not help either and it doesn't appear to be an avahi problem per se since avahi-browse -t --all | grep PulseAudio shows lots of right-looking stuff, even when the devices aren't listed in pavucontrol or pacmd list-sinks. Edit 2: I'm using Ubuntu 12.04 on both boxes for all the difference it might make.

  Read the article

• How can i get latency when using Game Center?

  - by Freddy

  I'm pretty new to network programming. Basically I'm using game center for making a relatively simple iPhone game using Game-center p2p. However i'm now working on a algorithm to improve the multiplayer performance. But, I need to know how long it took for a package to travel from one device to the another device (latency) for the algorithm to work good. As for now, I have solved the problem by sending a double with time interval since 1970 in the package and then I compare it with the time at the other device. However I have heard that the NSDate methods is connected to the internet, which also will cause latency so the time interval would not be perfectly correct. What is the ideal way to check for how long it take for a package to be sent?

  Read the article

• Is it possible to print to a Brother MFC-490CW that is conected to a LAN

  - by Johan Poelsma

  I have a Brother MFC-490CW printer that is connected to my LAN (wireless) and on which I can print with fine from Windows. From Ubuntu however, it does not seem to be possible. I downloaded and installed cups and lpd drivers from the Brother site and installed them. I get a Brother printer that says it is connected via USB. If I search for a network printer, my printer is shown. If I select it and select the correct driver, I can submit test pages. These pages are however not printed. What could be wrong. Should it really be that much harder then it is on Windows?

  Read the article

• 12.04, nvidia-settings makes one of my dual monitors grey and useless, disables network

  - by Kerrick

  I'm running Ubuntu 12.04 64-bit, Precise Pangolin, with a PNY GTS 250 1GB video card and a monitor plugged into each of the DVI ports. I'm using the proprietary drivers (post-release updates). If I set anything to do with Separate X Screens up in nvidia-settings (and write it to xorg.conf and reboot), my second monitor has a grey background, no menu bar, no ability to have a window on it, the second monitor doesn't get picked up in a screneshot, and if I move my mouse cursor to it it's an ugly black X. Plus, my network is unable to connect to anything. If I subsequently delete /etc/X11/xorg.conf and reboot, everything goes back to working, albeit with a single monitor activated. If I set anything to do with TwinView up in nvidia-settings, my second monitor starts working, but it isn't seen as a second monitor by Ubuntu, so I can't apply color calibration to it separately. Plus, my mouse gets "caught" between the monitors every time I try to move my cursor between the two. What gives? If it helps, this is the xorg.conf that nvidia-settings generates for Separate X Screens.

  Read the article

• Unable to connect to the Internet via LAN despite the connection showing as established

  - by Vikram

  I have installed Ubuntu 11.10. I am facing a problem connecting via LAN. We have a firewalled network. After entering static IP, gateway, DNS, etc., it shows connection as established but we are unable to use the Internet using the wired connection (LAN). While checking system testing following error shows under network test: ERROR:root:Could not find def gateway info in /proc ERROR:root:Could not find default gateway by running route

  Read the article

• How to set multiple nameservers in /etc/resolv.conf which sticks on reboot?

  - by chrone

  Ubuntu 14.04 Server edition only displays "nameserver 127.0.0.1" in "/etc/resolv.conf" on each reboot if the dns-nameservers in "/etc/network/interfaces" contains 127.0.0.1 and some other DNS such as Google Public DNS. On /etc/network/interfaces I set as follows: dns-nameservers 127.0.0.1 8.8.8.8 But after a reboot, /etc/resolv.conf gives me this: nameserver 127.0.0.1 Shouldn't the "nameserver 8.8.8.8" listed in the /etc/resolv.conf too? Thanks in advanced.

  Read the article

• If the net is required to install an Atheros 8161 driver,how do I connect to the net without the driver?

  - by Paul

  If Ubuntu does not recognize hardware to connect to the net, and a net connection is necessary in order to install drivers for hardware that connects to the net, then how is such a system ever going to connect to the net? You can see the situation in this thread: How do I install drivers for the Atheros AR8161 Ethernet controller? and in this thread: build-essential and linux-headers-generic gives abort message Surely, surely, there is a way out of this catch-22.

  Read the article

• wifi not working hp dv4

  - by Blaze

  i get this output for sudo lshw -C network : *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 06 serial: 3c:4a:92:cd:63:98 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:3000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network DISABLED description: Wireless interface product: RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip] vendor: Ralink corp. physical id: 0 bus info: pci@0000:0a:00.0 logical name: wlan0 version: 00 serial: 90:00:4e:82:3c:5b width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.0.0-17-generic-pae firmware=0.34 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c2500000-c250ffff i cant enable the wifi using the fn+f12 key.. its just stuck. In windows 7 it gets enabled when i press the same keys. but this happens after it gets booted up... i just want to use the wifi in anyway possible. can anybody help?

  Read the article

• Printing to a printer connected to a wireless router

  - by mspencer

  I have a Netgear WNDR4500 wireless router which allows me to print wirelessly to a printer connected to it via a USB cable. However, the software used to print to it only works for Windows and OS X. I've seen the question Printing to a printer attached to a network USB hub, and tried the instructions it gave using my router's IP address, but when I print a test page it says copying data then says printer is in use. In the printer queue window it says not connected. How can I print to the printer using Ubuntu? Thanks.

  Read the article

• Slow wifi with D-link DWA-160 A2

  - by Tommy Brunn

  I recently bought a USB wifi adapter for my new desktop computer. It's a D-link DWA-160 A2. From the start it didn't want to work at all, but after unplugging and then plugging it back in, it seems to work. However, my browsing is painfully slow. NetworkManager reports the connection to be at around 78-85% signal strength, which seems perfectly acceptable. Is there anything I can do to make it faster? I'm dual booting with Windows 7, where it seems to work fine, so I'm guessing that the problem occurs because of crappy drivers.

  Read the article

• multiple godaddy domains to home router then reverse proxy to multiple internal servers [closed]

  - by Dan

  I need someone to steer me correctly... advising on all required components. I have multiple domains with godaddy, say site1.com , site2.com, site3.net I have multiple home LAMP servers... one on say, lampsrv1 = 192.168.0.2:8080 (windows) and lampsrv2 = 192.168.0.3:9080 (linux srv2) I would like to have server1.site1.com point to lampsrv1 and server2.site1.com point to lampsrv2 . I may also want server1.site2.com also point to my lampsrv1 as an option. My thinking is - I have a dedicated linux srv1 with a reverse proxy server behind the router, ie Apache or NGINX or equivalent directing to appropriate LAMP server. It's the godaddy subdomains, cnames or redirections, etc I'm having a challenge with for starters... I have tested apache with virtual servers but can't get proxying to work based on host header info... seems to go to one address making me think its actually the apache reverse proxying that's not quite working. Finally to add to this, my router has a dynamic IP but does lease for quite a while but that would be my final piece. So, I'm sure this might be a popular question but can't seem to piece this together. I need someone who has actually configured this scenario to advise but will take other suggestions.... please indicate if you have successfully configured this.

  Read the article

• Jquery website is not opening in UBUNTU but in XP, Everything is fine

  - by Raman Sethi

  I know it is weird, But I just discovered this, jquery.com is not opening in my ubuntu firefox or other KDE browser and hence many sites that copy codes from code.jquery.com also hanged. Is there any solution to this problem. I have found the problem It is actually with the DNS servers I am using, Google DNS, 8.8.8.8 and 8.8.4.4, whenever I use these DNS in ubuntu my system stop responding to some sites, actually they are connected nicely, but the request end up in waiting.. I dont understand why...??? I checked my DNS with cat /etc/resolv.conf Even after using Google DNS, it is showing DNS servers I received automatically after connecting to the service provider. I am connecting using Network Manager, not using DNS I provided but using the default one. Any Solution??

  Read the article

• Unable to use TL-WN821N

  - by udiw

  Hi, I got a TP-LINK USB wireless module - TL-WN821N, using Ubuntu 10.4 (same problems were also seen in 10.10). From everything I've read online, the usb should work just fine, since the Atheros ar9170 is built into the kernel. However, when I plug it in, it is detected as a USB device, but there is no wlan associated with it, and basically - nothing happens. Am I doing something wrong? what should I do so that the Atheros driver is associated with this device? btw, on Windows it works fine (with the drivers). Some logs: $ uname -mr 2.6.32-28-generic i686 $ lsb_release -d Description: Ubuntu 10.04.2 LTS $ lsusb ... (trimmed) Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 017: ID 0cf3:7015 Atheros Communications, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub $ lsmod |grep ar9 ar9170usb 51296 0 ath 7611 1 ar9170usb mac80211 205402 3 ar9170usb,iwl3945,iwlcore cfg80211 126528 5 ar9170usb,ath,iwl3945,iwlcore,mac80211 led_class 2864 4 ar9170usb,iwl3945,iwlcore,sdhci

  Read the article

• nvidia-settings makes one of my dual monitors grey and useless, disables network

  - by Kerrick

  I'm running Ubuntu 12.04 64-bit, Precise Pangolin, with a PNY GTS 250 1GB video card and a monitor plugged into each of the DVI ports. I'm using the proprietary drivers (post-release updates). If I set anything to do with Separate X Screens up in nvidia-settings (and write it to xorg.conf and reboot), my second monitor has a grey background, no menu bar, no ability to have a window on it, the second monitor doesn't get picked up in a screneshot, and if I move my mouse cursor to it it's an ugly black X. Plus, my network is unable to connect to anything. If I subsequently delete /etc/X11/xorg.conf and reboot, everything goes back to working, albeit with a single monitor activated. If I set anything to do with TwinView up in nvidia-settings, my second monitor starts working, but it isn't seen as a second monitor by Ubuntu, so I can't apply color calibration to it separately. Plus, my mouse gets "caught" between the monitors every time I try to move my cursor between the two. What gives? If it helps, this is the xorg.conf that nvidia-settings generates for Separate X Screens.

  Read the article

• Why is wireless slow with Atheros AR9285?

  - by Luke

  I know there are many posts like this, however none of the fixes I have found have worked. I had the issue on 11.04, and after having no luck fixing it decided to try 12.04 however this has not fixed the problem. I'm using a Lenovo IdeaPad, the network card is a Atheros Communications AR9285. edit add outputs: sudo iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"NETGEAR-PLOW" Mode:Managed Frequency:2.437 GHz Access Point: E0:91:F5:7D:1B:BA Bit Rate=65 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:77 Invalid misc:63 Missed beacon:0 eth0 no wireless extensions. lspci -nnk | grep -iA2 net 06:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Lenovo Device [17aa:30a1] Kernel driver in use: ath9k -- 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) Subsystem: Lenovo Device [17aa:392e] Kernel driver in use: r8169 Thanks

  Read the article

• Best way to implement mouse-based movement in MMOG

  - by fiftyeight

  I want to design an MMO where players click the destination they want to walk to with their mouse and the character moves there, similar to Runescape in this manner. I think it should be easier than keyboard movement since the client can simply send the server the destination each time the player clicks on a destination. The main thing I'm trying to decide is what to do when there are obstacles in the way. It's no problem to implement a simple path-finding solution on the client, the question is if the server will do path-finding as well, since it'll probably take too much Computation power from the server. What I though is that when there is an obstacle the client will send only the first coordinate it plans to go to and then when he gets there he'll send the next coordinate automatically. For example if there is a rock in the way the character will decide on a route that is made of two destinations so it goes around the rock and when it arrives at the first destination it sends the next coordinate. That way if the player changes destination is the middle he won't send unnecessary information. Is this a good way to implement it and is there a standard way MMOGs usually do it? EDIT: I should also mention that the server will make sure all movements are legal and there aren't any walls in the way etc. In the way I wrote it should be quite easy since all movements will be sent in straight lines so the server will just check there aren't any obstacles along that line.

  Read the article

• Reverse WiFi to Broadcast connection coming from a USB device

  - by Daniel Clem

  I am using the app called Clockworkmod Tether. It connects using a script ( command line " gksu ./run.sh " ) on the computer. All my programs connect to the internet perfectly, minitube, midori, transmission torrents. But the network manager does not show any connection, wired or wireless. So this may cause issues? What I want to do is take this connection, and be able to share it some way, any way, by wireless. This Acer Timeline "Aspire 5810TZ" does have an Ethernet, so wired out to a router might be an option. But I would prefer to simply reverse the Wireless card to broadcast out to about 2 or 3 devices. Is this possible? Yes I have taken a look at the other questions already posted here, but the answers are 1 year old or older, and not clear at all. I am moderately comfortable (4.5 out of 10 ) on the command line. But pretty much need line by line directions for what commands are needed and what order, ect. Edit I have already tried the method of "Left click network manager, Create New Wireless Network" It is created fine, and I am able to connect to it with a tablet, but am un-able to get an outside connection with it. Using the "Shared to other computers" option because DHCP doesn't seem to work, and WEP Passphrase Security. I get an IP address on the connected device. But as I said, won't bring up any outside webpages or the like. So perhaps this is the wrong approach?

  Read the article

• Yoga Pro 2 Wi-Fi not working

  - by user293004

  I installed Ubuntu 14.04 on my new Yoga Pro 2 and the wireless is not working. It started with Windows 8 on it. The Network Manager says Wi-Fi is disabled by hardware switch. I tried putting a blacklist file in ect/modprobe.d as has been suggested in many places. I called the file "blacklist-ideapad_laptop.conf" and wrote in the file blacklist ideapad_laptop I checked to make sure that the wireless is enabled in the BIOS. It is. I ran rfkill list all and it displayed: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I ran iwlist wlan0 scan and it displayed: wlan0 Failed to read scan data : Network is down I ran sudo rmmod ideapad_laptop and it displayed: rmmod: ERROR: Module ideapad_laptop is not currently loaded. I ran ifconfig wlp1s0 up and it displayed: wlp1s0: ERROR while getting interface flags: No such device. I ran "lspci" and it displayed: 01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b) I ran sudo lshw -c network and it displayed: *-network DISABLED description: Wireless interface product: Wireless 7260 vendor: Intel Corporation physical id: 0<br> bus info: pci@0000:01:00:0.0 logical name: wlan0 version: 6b serial: 7c:7a:91:5f:9b:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-24-generic firmware=22.24.8.0 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:61 memory:b0400000-b0401fff This No wireless with Intel Centrino Advanced-N 7260 seems to be dealing with a similar issue. It suggests that I need to update my firmware. So I downloaded iwlwifi-7260-ucode-23.214.9.0 from Intel's website. I put the file "iwlwifi-7260-9.ucode" in /lib/firmware and ran "sudo lshw -c network" again. It displayed exactly as before. Is there something else I need to do install the new firmware?

  Read the article

• How do I get a Qualcomm Atheros Killer E2200 gigabit ethernet card working on a MSI Z87-GD65?

  - by Travis Allen

  So I literally just built my first computer from scratch and I can't get the network card to work as I've gathered it requires getting some drivers somehow.. Motherboard : MSI Z87-GD65 CPU : Intel Haswell i7 Ubuntu Ver : 12.04 Using the on-board network port Please help I'm about to start crying into my keyboard over this (not really). Any info would be greatly appreciated, also please be very specific as to what I have to do as I have not used Ubuntu very much so talk to me like a child, I won't take offence. Also I've already tried following the instructions here : How do I get a Qualcomm Atheros Killer E2200 gigabit ethernet card working? I don't know if I'm just retarded or am missing something

  Read the article

• No internet access when I'm connect to my company's VPN

  - by Iago

  I googled my problem and I've read some questions in Ask Ubuntu, but I didn't solve my problem. I connect to a PPTP VPN server and it works well, but when I'm connected to that VPN I don't have Internet access but private network access. If I check "Use this connection only for resources on its network", I have Internet access, but this way I haven't access to my company's private network. What's the problem? Help, please.

  Read the article

• How to switch off wifi on startup or from the console

  - by mit

  I have installed ubuntu 10.04 on a laptop. Wifi is switched on by default on startup. I can disable it rightclicking the network manager icon in the gnome bar. How can I set it to have wifi switched off as default? Alternatively, how can I switch off wifi on the console? I tried already the rfkill command but it does not list any devices and it does not switch off wifi, I tried different parameters. This is a standard install of the Ubuntu 10.04 i386 Desktop Live CD on an IBM T40 Laptop. EDIT A: This is the output of some rfkill commands on my system, and it does not affect the wifi of the laptop: $ rfkill --help Usage: rfkill [options] command Options: --version show version (0.4) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm $ rfkill list $ rfkill list wifi $ rfkill list all $ rfkill list wlan $ sudo rfkill list all $ sudo rfkill block all $ sudo rfkill block wlan $ sudo rfkill block wifi $ EDIT B: Now I found out that sudo ifconfig eth1 down turns it off. And I can turn it on through the gnome network applet again. But the applet does not reflect the change from the commandline, it stills believes wifi is switched on. I have to switch it off and on again on the applet to switch it on again, when I switched it off from the console. Is there a better way? This is what the syslog looks like when I switch wireless off and on again from the network manager: NetworkManager: <info> (eth1): device state change: 3 -> 2 (reason 0) NetworkManager: <info> (eth1): deactivating device (reason: 0). NetworkManager: <info> Policy set '24' (eth0) as default for routing and DNS. NetworkManager: <info> (eth1): taking down device. avahi-daemon[660]: Withdrawing address record for fe80::202:8aff:feba:d798 on eth1. kernel: [ 971.472116] airo(eth1): cmd:3 status:7f03 rsp0:0 rsp1:0 rsp2:0 NetworkManager: <info> (eth1): bringing up device. NetworkManager: <info> (eth1): supplicant interface state: starting -> ready NetworkManager: <info> (eth1): device state change: 2 -> 3 (reason 42) avahi-daemon[660]: Registering new address record for fe80::202:8aff:feba:d798 on eth1.*. kernel: [ 965.512048] eth1: no IPv6 routers present

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >