Search Results

Search found 47246 results on 1890 pages for 'system recovery'.

Page 62/1890 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

  • IBM System x Server Buyer's Guide

    IBM has taken to the road with the message that Intel's Nehalem EX processors coupled with Big Blue's system engineering talents has resulted in a platform well-suited for virtualization, consolidation and mission-critical applications. Does the server hardware live up to the praise?

    Read the article

  • IBM System x Server Buyer's Guide

    IBM has taken to the road with the message that Intel's Nehalem EX processors coupled with Big Blue's system engineering talents has resulted in a platform well-suited for virtualization, consolidation and mission-critical applications. Does the server hardware live up to the praise?

    Read the article

  • Misused mke2fs and cannot boot into system

    - by surlogics
    I installed Ubuntu with WUBI in Windows 7 64bit, and I had installed Mandriva 2011 with a disk. I tried to learn Linux with Ubuntu and misused mke2fs; after I reboot my computer, Windows 7 and Ubuntu has crashed. As I have Mandriva, I boot into Mandriva and found # df -h /dev/sda7 12G 9.8G 1.5G 88% / /dev/sda2 15G 165M 14G 2% /media/logical /dev/sda6 119G 88G 32G 74% /media/2C9E85319E84F51C /dev/sda5 118G 59G 60G 50% /media/D25A6DDE5A6DBFB9 /dev/sda9 100G 188M 100G 1% /media/ae69134a-a65e-488f-ae7f-150d1b5e36a6 /dev/sda1 100M 122K 100M 1% /media/DELLUTILITY /dev/sda3 98G 81G 17G 83% /media/OS # fdisk /dev/sda Command (m for help): p Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd24f801e Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 6 FAT16 /dev/sda2 * 206848 30926847 15360000 7 HPFS/NTFS/exFAT /dev/sda3 30926848 235726847 102400000 7 HPFS/NTFS/exFAT /dev/sda4 235728864 976771071 370521104 f W95 Ext'd (LBA) /dev/sda5 235728896 481488895 122880000 7 HPFS/NTFS/exFAT /dev/sda6 727252992 976771071 124759040 7 HPFS/NTFS/exFAT /dev/sda7 481500243 506674034 12586896 83 Linux /dev/sda8 506674098 514851119 4088511 82 Linux swap / Solaris /dev/sda9 514851183 727246484 106197651 83 Linux Partition table entries are not in disk order I think I may used the following command mke2fs -j -L "logical"/dev/sda2 but I had forgotten what kind of partition it was before I transfered it into ext3. perhaps ntfs Data was not lost, and I can view my files as I could in Windows. In Mandriva, there are following disks: 117.2 GB hard disk, files in it is the same as my Windows D:, and Ubuntu was installed in it; 119.0 GB hard disk is my G:, with my personal files in it; 12.0 GB is the same with Mandriva / (with means root), 101.3 GB hard disk with nothing but lost+found; DELLUTILITY should be Dell computer utilities pre-installed in my computer; logical is the disk which I had spoiled, I can view nothing but lost+found; and OS is the C: in my Windows. After I boot, grub lets me choose Mandriva or Windows. I chose Windows and it tells me: FILE system type unknown, partition type 0x7 Error 13: Invalid or unsupported executable format I doubt something wrong with windows MBR or something # cat /boot/grub/menu.lst timeout 5 color black/cyan yellow/cyan gfxmenu (hd0,6)/boot/gfxmenu default 0 title linux kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=linux root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot logo.nologo quiet resume=UUID=34c546e4-9c42-4526-aa64-bbdc0e9d64fd splash=silent vga=788 initrd (hd0,6)/boot/initrd.img title linux-nonfb kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot resume=UUID=34c546e4-9c42-4526-aa64-bbdc0e9d64fd initrd (hd0,6)/boot/initrd.img title failsafe kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot failsafe initrd (hd0,6)/boot/initrd.img title windows root (hd0,1) makeactive chainloader +1 I can boot into Linux, but not Ubuntu, it boot into Mandriva. I don't have a boot disk. Help me find a way to make it work again.

    Read the article

  • system requirement

    - by Sol
    My laptop developed a bad sectors and not working well. It was with ubutuntu 12.04 LTS operating system. Now, I want to install ubuntu in an relatively old desktop with the following specifications Hp compaq dx 2390 Intel ® Pentium Dual Core CPU, E2180 @ 2.00 GHZ, 1.20 GHz, 1 GB Ram, 160 GB Hard Drive Which k/x/ubuntu version is suitable to this desktop? PS. I am working in my final thesis and I need a stable k/x/ubuntu to this specification. Thank u

    Read the article

  • Ubuntu 12.04 to 14.04 LTS upgraded but crashed soon after restarting the system

    - by LEELA MANOJ N
    In Ubuntu 12.04 the update manager offered me to upgrade it to 14.04, so i kept it for upgrading for whole night and after all the downloading, fetching and removing of packages it asked for restart. So i restarted the system that's it from that time there is no log in page, nothing is coming and just a black command prompt prompting initramfs is appearing (BUSY BOX or something). How can i solve this issue ? or there is way to revert back to 12.04? please help?

    Read the article

  • Accidently system timer speed up

    - by Grind Core
    Laptop: Acer 5750zg I've found this issue in latest Ubuntu versions (13.04, 14.04) in all desktop environment. When I'm typing something in text field, randomly I get ~5..20 same symbols and everything speed up. It's happen few times per one minute and start from normal speed, slowly rising to super boost animation and other processes like CPU monitor, clock, window animation, etc. I think something wrong with system clock. Please help to figure out how to fix it.

    Read the article

  • Selecting an Open Source Operating System

    <b>Network World:</b> "There's a large selection of free and open source (FOSS) operating systems available these days, and choosing the right one for any given circumstance can be quite a challenge. This article outlines the key factors you need to consider in order to pick the best operating system for your needs and experience level."

    Read the article

  • Reasons to Use a Work Order Software System

    Keeping track of the bottom line has never been more critical than in these trying economic times. That';s why many companies are choosing to use a work order system to better keep track of jobs and m... [Author: Belinda Verducci - Computers and Internet - June 05, 2010]

    Read the article

  • Windows Backup fails with 0x80070002: "The system cannot find the file specified"

    - by James Johnston
    Windows 7 Backup is failing. When backing up even a single insignificant directory (e.g. I chose only the empty "Contacts" directory, leaving all other directories unchecked), I get this error within a few seconds and the backup fails. If I uncheck all files/directories, and just do the system image - then the system image is backed up OK without issue. Backup destination is an external USB hard drive. Steps to reproduce and subsequent failure: Set up backup to go to external hard drive. Don't back up system image. Back up "Contacts" directory only for my profile. Start backup. Immediately view the status of the backup, it stays on "Creating a shadow copy..." for a few seconds, and then the backup fails. Click Options button, and it says "Check your backup / The system cannot find the file specified." - with options to "Try to run backup again" or "Change backup settings". If I click "Show Details", then it says: Backup time: 4/12/2012 04:38 Backup location: My Book (D:) Error code: 0x80070002 An examination of the Event Log shows nothing useful beyond the following: Log Name: Application Source: Windows Backup Date: 4/12/2012 04:38:44 Event ID: 4104 Task Category: None Level: Error Keywords: Classic User: N/A Computer: JTJLaptop Description: The backup was not successful. The error is: The system cannot find the file specified. (0x80070002). Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Windows Backup" /> <EventID Qualifiers="0">4104</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2012-04-12T04:38:44.000000000Z" /> <EventRecordID>23979</EventRecordID> <Channel>Application</Channel> <Computer>JTJLaptop</Computer> <Security /> </System> <EventData> <Data>The system cannot find the file specified. (0x80070002)</Data> <Binary>02000780E30500003F0900005B090000420ED1665C2BEE174B64529CB14610EA71000000</Binary> </EventData> </Event> What I have tried: ChkDsk on both C: (main drive) and D: (backup drive) doesn't find any errors. Running SFC /SCANNOW to run system file checker Checked the list of profiles at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList and ensured that each profile directory exists. I'm stumped; WHAT file can't be found and why is my backup failing? This is on a Lenovo T420 laptop.

    Read the article

  • BSOD & System Failure after trying to install a new RAM

    - by Praveen Kumar
    I have updated the question with sections, so that people won't find it difficult to read. Basic System Information Let me give a basic introduction on my system. I have a system of following configuration: Processor: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz 3.40GHz RAM: Corsair Vengeance - 4GB Single Module DDR3 Memory Kit (CMZ4GX3M1A1600C9) x 2 OS: Windows 7 Ultimate, SP1 Build 7601 HDD: 1 TB Seagate 7200 RPM The Problem It was working fine for about an year. Yesterday I planned to increase my RAM to 16 GB by putting another set of two Corsair Vengeance - 4GB Single Module DDR3 Memory Kit (CMZ4GX3M1A1600C9). I got it from an authorized reseller and also, the RAM was fitted by a service engineer only. After the RAM was fit (all the four), the system failed to start, with an error code of 0x000000f4. The complete information of it is: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 16393 Additional information about the problem: BCCode: f4 BCP1: 0000000000000003 BCP2: FFFFFA8008A39060 BCP3: FFFFFA8008A39340 BCP4: FFFFF800037C8510 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\093012-13041-01.dmp C:\Users\Praveen Kumar\AppData\Local\Temp\WER-30716-0.sysdata.xml Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt Another Problem We first thought that it was the RAM, which caused the issue. So I returned the RAMs and now my computer configuration is exactly how it was the previous day. But, following the removal of the RAM, I also had several crashes after that. One suspicious thing was with an error code c0000134: STOP: c0000135 The program can’t start because %hs is missing from your computer . Try resintalling the program to fix this problem. After reading contents from this, this and this, which were never my case, they didn't help me. But I didn't receive any more STOP c0000134 messages. But this 0x000000f4 keeps on coming. I am writing from the same system and it allows me to work for say, half an hour max. Then I hear a device disconnect sound, the one you hear in Windows 7, when a USB Mass Storage Device is plugged out. Immediately following that, my screen goes blank and I get 0x000000f4 blue screen. Okay, now I am really concerned about my Hard Disk data, but I have no clue if there is a problem with the HDD. My Question What all files do I need to submit for your reference? Can this issue be fixed? I am getting more time if I remove my RAM, clean it and then put it back. Weird! Hope I have given the necessary information to help you guys. Thanks in advance. Minidumps I have uploaded all the Minidump DMP files from C:\Windows\Minidump folder here: http://www.praveen-kumar.com/Minidumps.zip Let me know if you face any issues in accessing it. Will be able to share elsewhere. Updates 30-Sep-2012 10:15 AM IST: When I keep the system cover opened, pressed the HDD Cable well, it is allowing me to be on for about half an hour, I guess? Also, I feel that the CPU fan speed is kind of slow. It rotates at around 900 RPM, but the CPU Temperature is not more than 70° C. 30-Sep-2012 10:30 AM IST: My Modem (Beetel 220BX ADSL2+ Router) failed. I have no idea how it is related to this issue, but I thought that I need to document this too. I really have a bad day here. 30-Sep-2012 11:00 AM IST: System still running fine, with the cabinet cover open, now for about an hour. 30-Sep-2012 12:00 PM IST: I shut down the system and closed the cabinet. Started the system, and it hung after giving the password. After a few minutes, got the same 0x000000f4 error. So, while it is in the upright position, fixed the Hard Disk cable and now it is booting fine. Waiting for more observations and answers.

    Read the article

  • Reconstructing the disk order in RAID 6 with 7 disks

    - by rkotulla
    a little background to this question first: I am running a RAID-6 within a QNAP TS869L external RAID/NAS system. I started with 5 disks of 3 TB each back in the day, and later added another 2 disks of 3TB to the RAID. The QNAP internals handled the growing and re-syncing etc, and everything seemd to be perfectly fine. About 2 weeks ago, I had one of the disks (disk #5, disk #2 has gone bad in the mean time) fail, and somehow (I have no idea why), also disks 1 and 2 got kicked out of the array. I replaced disk #5, but the RAID didn't start working again. After some calls to QNAP technical support, they re-created the array (using mdadm --create --force --assume-clean ...), but the resulting array couldn't find a filesystem, and I was kindly referred to contact a data recovery company that I can't afford. After some digging through old log files, resetting the disk to factory default, etc, I found a few errors that were made during this re-create - I wish I still had some of the original metadata, but unfortunately i don't (I definitely learned that lesson). I'm currently at the point where I know the correct chunk-size (64K), metadata-version (1.0; factory default was 0.9, but from what I read 0.9 doesn't handle disks over 2 TB, mine are 3 TB), and I now find the ext4 filesystem that should be on the disks. Only variable left to determine is the right disk order! I started using the description found in answer #4 of "Recover RAID 5 data after created new array instead of re-using" but am a little confused on what the order should be for a proper RAID-6. RAID-5 is pretty well documented in a number of places, but RAID-6 much less so. Also, does the layout, i.e. distribution of parity and data chunks across the disks, change after the growing of the array from 5 to 7 disks, or does the re-sync re-organize them in such a way a native 7-disk RAID-6 would have been? Thanks some more mdadm output that might be helpful: mdadm version: [~] # mdadm --version mdadm - v2.6.3 - 20th August 2007 mdadm details from one of the disks in the array: [~] # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 1.0 Feature Map : 0x0 Array UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Name : 0 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Raid Devices : 7 Used Dev Size : 5857395112 (2793.02 GiB 2998.99 GB) Array Size : 29286975360 (13965.12 GiB 14994.93 GB) Used Size : 5857395072 (2793.02 GiB 2998.99 GB) Super Offset : 5857395368 sectors State : clean Device UUID : 7c572d8f:20c12727:7e88c888:c2c357af Update Time : Tue Jun 10 13:01:06 2014 Checksum : d275c82d - correct Events : 7036 Chunk Size : 64K Array Slot : 0 (0, 1, failed, 3, failed, 5, 6) Array State : Uu_u_uu 2 failed mdadm details for the array in the current disk-order (based on my best guess reconstructed from old log-files) [~] # mdadm --detail /dev/md0 /dev/md0: Version : 01.00.03 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Array Size : 14643487680 (13965.12 GiB 14994.93 GB) Used Dev Size : 2928697536 (2793.02 GiB 2998.99 GB) Raid Devices : 7 Total Devices : 5 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Jun 10 13:01:06 2014 State : clean, degraded Active Devices : 5 Working Devices : 5 Failed Devices : 0 Spare Devices : 0 Chunk Size : 64K Name : 0 UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Events : 7036 Number Major Minor RaidDevice State 0 8 3 0 active sync /dev/sda3 1 8 19 1 active sync /dev/sdb3 2 0 0 2 removed 3 8 51 3 active sync /dev/sdd3 4 0 0 4 removed 5 8 99 5 active sync /dev/sdg3 6 8 83 6 active sync /dev/sdf3 output from /proc/mdstat (md8, md9, and md13 are internally used RAIDs holding swap, etc; the one I'm after is md0) [~] # more /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md0 : active raid6 sdf3[6] sdg3[5] sdd3[3] sdb3[1] sda3[0] 14643487680 blocks super 1.0 level 6, 64k chunk, algorithm 2 [7/5] [UU_U_UU] md8 : active raid1 sdg2[2](S) sdf2[3](S) sdd2[4](S) sdc2[5](S) sdb2[6](S) sda2[1] sde2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdg4[3] sdf4[4] sde4[5] sdd4[6] sdc4[2] sdb4[1] sda4[0] 458880 blocks [8/7] [UUUUUUU_] bitmap: 21/57 pages [84KB], 4KB chunk md9 : active raid1 sdg1[6] sdf1[5] sde1[4] sdd1[3] sdc1[2] sda1[0] sdb1[1] 530048 blocks [8/7] [UUUUUUU_] bitmap: 37/65 pages [148KB], 4KB chunk unused devices: <none>

    Read the article

  • A failed disk (Pay for professional service or SpinRite?)(new edit)

    - by huggie
    EDIT: After much negotiating and begging and seeing through promotion smoke screen, thanks to the nice representative who took my case, I now know that the engineer has already fixed my NTFS partition (I guess it might be a bad block in the partition table?). She told me that the problem was considered minor, and I should be able to boot normally and just copy stuff out. Whew..I'm glad I didn't agree to the NTD $16,000 deal. New question (should this be in a new thread?): is it safer to use the linux "dd" command or is it better to boot normally into Windows XP and just copy stuff out? EDIT2: Thanks to all the help. I give the best answer to Console as it's most directed related to my question. But many suggestion are helpful and informational. ---- ORIGINAL POST BELOW --- Hi, in my previous post (You don't need to read but it's at http://superuser.com/questions/48838/windows-xp-a-disk-read-error-occurred), I said that my hard disk was not booting and is showing "a disk read error occurred". I took it to a recovery professional. A representative responded today told me that the NTFS partitions have a "NTFS partition system crash". I have no idea what that means. The engineer handling my drive will not be available for contact till tomorrow. Now the company charges me NTD (New Taiwan Dollar) $16,000 to recover lost data, that's kind of a lot considering that my graduate student monthly stipend is currently NTD $32,000 (max. allowed by regulation, may be lower, may change depend on funding). Now I'm weighting in between the options. Option A: let the professional recovers it with the half of my monthly stipend. If file/directories I designated are not recovered I don't pay a penny. (other than the initial examination fee of NTD $1000 which I've already paid.) Option B: let me try SpinRite, if failed, back to Option A. I spoke to the representative at the company they recommended me not to handle it on my own (yeah of course that's what they all want to say, right?), and at the price tag the disk error is probably relatively minor and data recoverable. But the representative really did not have detailed information of the disk failure so I didn't take her recommendation readily. Though one thing I heed was that she said that what they would do is to duplicate the disk before attempting discovery, so there would be no data loss (Is this true? can't duplicating invoke further data loss?). That sounds very good to me. Or maybe a third option: Option C: Negotiate with them to pay them to duplicate the disk hopefully for a much smaller price tag. Let me try SpinRite, if failed, back to Option A. This is a difficult decision. Ultimately I want my data back, but if a cheaper way is available to achieve the same thing... Can operating with SpinRite also corrupt data in someway? I've no idea what happened to my drive. I'll attempt to contact the engineer and hope to get it clarified and make an edit here.

    Read the article

  • Why won't my AJAX controls work? (and ajax for .net 4 not working?)

    - by Nicklamort
    I'm totally new to ajax. I'm using VS2005. I just downloaded .NET framework 4 and so then I downloaded ajaxcontroltoolkit.binary.net4 via [http://ajaxcontroltoolkit.codeplex.com/releases/view/43475] (as opposed to ajaxcontroltoolkit.binary.net35 for .NET 3.5), but when I try to load the ajaxcontroltoolkit.dll into my toolbox (as said in the tutorials), I get the following error msg: "'C:......\ajaxcontroltoolkit.dll' is not a microsoft .NET module." First question: Why is this happening? So I tried downloading the "Recommended" ajaxcontroltoolkit.binary.net35, and it accepted the .dll file and loaded all my controls. So, I started a new website and tried to check out a combobox, and it displays, but IE is giving the follow error msg: 'Sys.Extended.UI.PositioningMode.BottomLeft' is null or not an object.' 2nd question: Why is this happening? LOL Thank you. <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %> <%@ Register Assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Namespace="System.Web.UI" TagPrefix="asp" %> <%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="ajx" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title>Untitled Page</title> </head> <body> <form id="form1" runat="server"> <div> <asp:ScriptManager runat="server"> </asp:ScriptManager> <ajx:ComboBox ID="ComboBox1" runat="server"> </ajx:ComboBox> </div> </form> </body> </html> Here is my web.config: <?xml version="1.0"?> <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="Everywhere"/> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication"/> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <appSettings/> <connectionStrings/> <system.web> <pages> <controls> <add tagPrefix="ajaxToolkit" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit"/> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </controls> </pages> <compilation debug="true"> <assemblies> <add assembly="System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/> <add assembly="System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions.Design, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> </assemblies> </compilation> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" validate="false" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpModules> <authentication mode="Windows"/> </system.web> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ScriptModule"/> <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <remove name="ScriptHandlerFactory"/> <remove name="ScriptHandlerFactoryAppServices"/> <remove name="ScriptResource"/> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" verb="GET,HEAD" path="ScriptResource.axd" preCondition="integratedMode" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </handlers> </system.webServer> </configuration>

    Read the article

  • Dell PowerEdge R410: System asks to press F1 or F2

    - by hurikhan77
    We just installed an option card (PERC 6/i) into a brand-new Dell PowerEdge R410 and now the system does no unattended startup but instead asks me to press F1 to continue or F2 to enter system setup after printing the following message on the console: Fan 4 speed may change depending on system configuration and option card install. How do I make the system ignore this "problem" or whatever that is? This system is going to be installed at a remote data center and needs to be able to restart unattended. I do not want to ignore errors completely to not get endless restart loops in case of errors.

    Read the article

  • Windows server reboot loop - uninstalling hotfixes

    - by Jack
    After installing 3 updates, my system is stuck in a reboot loop. I am using server 2008 r2. I have tried deleting pending.xml from the windows directory, so pelase don't suggest that. I tried dism /image:d:\ /cleanup-image /revertpendingactions which completed successfully but did not solve my issue I then tried: dism /image:d:\ /Remove-Package /PackageName: and sucusfully removed one of the 3 updates. The two updates that are left are not listed with the dism get-packages command, but are listed with the get-apppatches command. I cannot find a way to uninstall them with dism however. So my question is, how can I manually uninstall specific updates or hotfixes from within the winre environment?

    Read the article

  • Reorganize Primary/Recovery Partitions and then install Ubuntu Netbook Remix?

    - by Wesley
    Hi all, I have a Samsung N120 netbook (with upgraded 2GB RAM). I recently got a new hard drive and motherboard for it because the original parts were faulty. However, when I got it back, whoever was working on it decided to make my primary partition ~40GB in size, compared to (what appears to be) the recovery partition, which is around 100GB in size. Firstly, I want to make the recovery partition much smaller (around ~10GB or smaller, if possible) and then make my primary partition fill the rest of the space. After that, I want to install Ubuntu Netbook Remix 9.10. I don't know if this is installed within Windows like Ubuntu 9.10 but I want both XP and UNR on my machine at the same time. So basically... how do I resize my primary and recovery partitions such that the recovery is about 10GB or less and the primary fills the rest? Secondly, is UNR installed within Windows? (If not, would it create its own partition on my hard drive, along with the XP partition, and the recovery partition?) Thanks in advance.

    Read the article

  • Patch Management and System Inventory on a Windows network?

    - by Scott
    What are some good ways to have patch management and systems/hardware inventory for a Windows (Server 2003 or 2008) network? For example, at a minimum knowing the basics for all the machines out on the network such as OS version, patch level, what hotfixes they have, processor, ram, etc. Even better would be knowing more details such as peripherals. Ideally if there were a way to push service packs, and hotfixes (and other software?) to the machines, that would be great. What are some options for this?

    Read the article

  • Corrupt file indicative of corrupt hard drive?

    - by Elipsicon
    I have noticed that two files on my (almost full) 2 TB hard drive have been corrupted. One file has 20 kB (!) corrupted, i.e. consecutive 20 kB have changed, even though the modification date of the file hasn't changed and I haven't worked with this file for over a year. This tells me that something "below" the file system level has messed with the data and the only thing I can think of is hardware failure, most likely hard disk failure. I've tested my RAM already and it works flawlessly. I'm using ext4 on Linux, if that is of any help. Is this normal? Is it time to change my hard drive disk before something worse happens? What can I do to prevent that from happening in the future? Is there some built-in feature of, or extension to ext4 that includes additional error correcting code and/or watches files for changes that haven't been caused by the OS?

    Read the article

  • Oracle EE 11.2g: how to generate fresh new redo logs

    - by Aikanaro
    Hi, In the company I work for we are heavy users of vmware machines. Almost all our projects are developed inside a virtual environment up to the point where we have to deploy them into a production system. While in development, some colleagues of mine deleted the redo log files for Oracle in the hopes of gaining some free space. Now they are unable to start the database instance. Is there a way of generating a fresh new redo log so that the instance can be started? This is urgent and even though I'm currently googling for an answer I have yet to find it. Thanks in advance.

    Read the article

  • How can I restore my deleted calendar data in Windows Live Mail ?

    - by Cheryl
    I have been using the calendar in Windows Live Mail for months now. When I logged on yesterday, all of the data and appointments I have been inputting for months is gone. The calendar is completely blank. I have performed a system restore with no luck. I have run in safe mode with no luck. I have run a check disk in DOS with no luck. Any other ideas on what I can do to find my calendar info? Could the file be corrupt? I rely on this calendar and all of my info is gone, so any help will be greatly appreciated.

    Read the article

  • How to recover deleted files?

    - by vijay.shad
    Hi My laptop has two os. one is windows vista. and other is Ubuntu. I am currently on ubuntu system, this is my primary OS. There are 4 partitions of my hard disk Windows OS Linux(Ubuntu OS) Data Now the problem part. The data partition is NTFS. I have mounted this partition on the location /media/windrive-a under ubuntu OS. A little while back i decided to delete the mounting of the data partition and i fired command rm -r /media/windrive-a/. To give me a shock; all my data on data drive is gone. Now, I know this is not the command to remove mounted partition. But I have committed the wrong. Is there any way i can get my data back. These are very important data for me. Please suggest.

    Read the article

  • Need to use DART, can't access windows at all

    - by Jack
    I have an install of windows server R2. After installing two patches, the system is stuck in a reboot loop. I wish to uninstall these patches to revert my stsem to normal. I have looked at dism, but it does not seem to provide a way to uninstall specific MSP patches. I don't believe I can utilize msiexec in WinRE to uninstall the patches. And so, I believe DART is what I need, which will allow me to uninstall specific patches. However, I cannot access my install of windows at all, which is what is apparently needed to make the dart media. Is there any way around this?

    Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >