Search Results

Search found 37604 results on 1505 pages for 'build script'.

Page 620/1505 | < Previous Page | 616 617 618 619 620 621 622 623 624 625 626 627  | Next Page >

  • How can I install Satchmo?

    - by Jonathan Hayward
    I am trying to install Satchmo 0.9 on an Ubuntu 9.10 guest off of the instructions at http://bitbucket.org/chris1610/satchmo/downloads/Satchmo.pdf. I run into difficulties at 2.1.2: pip install -r http://bitbucket.org/chris1610/satchmo/raw/tip/scripts/requirements.txt pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo The first command fails because a compile error for how it's trying to build PIL. So I ran an "aptitude install python-imaging", locally copy the first line's requirements.text, and remove the line that's unsuccessfully trying to build PIL. The first line completes without error, as does the second. The next step tells me to change directory to the /path/to/new/store, and run: python clonesatchmo.py A little bit of trouble here; I am told that clonesatchmo.py will be in /bin by now, and it isn't there, but I put some Satchmo stuff under /usr/local, create a symlink in /bin, and run: python /bin/clonesatchmo.py This gives: jonathan@ubuntu:~/store$ python /bin/clonesatchmo.py Creating the Satchmo Application Traceback (most recent call last): File "/bin/clonesatchmo.py", line 108, in <module> create_satchmo_site(opts.site_name) File "/bin/clonesatchmo.py", line 47, in create_satchmo_site import satchmo_skeleton ImportError: No module named satchmo_skeleton A find after apparently checking out the repository reveals that there is no file with a name like satchmo*skeleton* on my system. I thought that bash might be prone to take part of the second pip invocation's URL as the beginning of a comment; I tried both: pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9\#egg=satchmo pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo Neither way of doing it seems to take care of the import error mentioned above. How can I get a Satchmo installation under Ubuntu, or at least enough of a Satchmo installation that I am able to start with a skeleton of a store and then flesh it out the way I want? Thanks, Jonathan

    Read the article

  • ssl_error_rx_record_too_long connection error with SSL site in Firefox

    - by Thomas
    I am trying to set up SSL in Apache but when I go to the server in Firefox I get the following error message: An error occurred during a connection to sludge.home. SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long) My virtual host config file looks like this. <IfDefine SSL> <VirtualHost *:443> ServerName sludge.home SSLEngine on SSLCertificateFile /usr/local/apache/cert/server.crt SSLCertificateKeyFile /usr/local/apache/cert/server.pem SSLProtocol -SSLv2 SSL CipherSuite HIGH:!ADH:!EXP:!MD5:!NULL DocumentRoot "/usr/local/apache/htdocs" ServerAdmin [email protected] <Location /> AuthType Digest AuthName "private area" AuthDigestDomain / AuthDigestProvider file AuthUserFile /usr/local/apache/passwd/digest_pw Require valid-user </Location> <Directory /usr/local/apache/htdocs/bugz> AddHandler cgi-script .cgi Options +Indexes +ExecCGI DirectoryIndex index.cgi AllowOverride Limit FileInfo Indexes </Directory> <Directory /usr/local/apache/htdocs/bugzilla> AddHandler cgi-script .cgi Options +Indexes +ExecCGI DirectoryIndex index.cgi AllowOverride Limit FileInfo Indexes </Directory> <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> <Directory "/usr/local/apache/htdocs"> Options Indexes FollowSymLinks Allow Override None Order allow,deny Allow from all </Directory> <IfModule dir_module> DirectoryIndex index.html </IfModule> <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> </VirtualHost> </IfDefine> A telnet to this server reveals that server is sending plain HTML back. Further more it seems as though mod_ssl is not loaded/working even though when I httpd -l it shows up as being statically compiled in. I have exhausted most avenues I can think of.

    Read the article

  • How to permanently "renice" a process on Mac OS X (or iOS, etc)?

    - by mralexgray
    I use a nice (free) process manager called ATMonitor for Mac OS X that has a lot of cool hidden features... one of which is being able to click on a running process.. and set the "renice" from +20 (less priority) to -20 (highest priority). The best part.... it sticks between restarts... SO you want XYZ to get full attention all the time.. you set it once and it's done... I want to do the same thing (renice a process) on an iPad running a particular daemon.. and I don't know how to set a renice permanently. I can do it once, and it works fine... But the setting is lost on a reboot. I read somewhere.. Now, as for permanently resetting the priority of a process, this can't be done directly. You can fake it, however, with a shell script that starts the app and then immediately renice's it. Give that script a ".command" extension and it will be double-clickable in the GUI. Not very elegant, but it gets the job done. But as it says.. not very elegant, and I dont think this is how ATMonitor does it.... I found this thread.... http://superuser.com and they gave a way to do it as a launch argument, but no apparent way to save it as a persistent value... for instance - if the program wasn't going to be started by launchd... How do I set a permanent renice level, per executable binary, independent of it's PID, when, how or why it was launched?

    Read the article

  • setting up synergy (multi-computer shared input devices) new to mac

    - by pedalpete
    I've just gotten a mac and the first thing I'm trying to do in setting it up for dev is to set-up synergy. I've run into countless issues, and am making progress, but that 'mac's just work' theory is getting tired really fast. I'd prefer running the mac as the server, as it's a desktop. why use my pc(laptop) as the server. So i downloaded synergy, and tried to edit the 'synergy.conf' file. First with textmate, then with apple script. Neither of these applications will open the file. Even after changing textmate to use plain text format and switching off a few other things to make it into a plain text editor. No good. Uh, isn't that what these script/text editors are for? Then I found SyneryKM which is a package to run synergy on osx. Took LOTS of fiddling, but I think I finally kinda got it figured out. I've got my pc & mac both running synergy. However, my pc will only connect to synergy using the ip address. No problem, however, my mac won't connect to itself as a synergy server using the IP address. If I use the ip address as a screen in the 'server configuration file', i get a 'Error: unknown screen name mymac'. I know this shouldn't be super complicated, and possibly not the place to find answers about synergy, but I couldn't find a better place, and there has been some talk of synergy here. Any chance somebody can help with this?

    Read the article

  • How to run some commands after booting from ArchLinux disk? Or how to change some settings in .iso before booting?

    - by Alexander Ovchinnikov
    How to install Arch Linux with traditional installer with only ssh-access to server? There is nice guide: https://wiki.archlinux.org/index.php/Install_from_SSH I try test this on my home vps: Start VPS with any linux bootable cd and login to remote server (vps) wget http://mirrors.kernel.org/archlinux/iso/latest/archlinux-2010.05-netinstall-x86_64.iso dd if=archlinux-2010.05-netinstall-x86_64.iso of=/dev/sda reboot ... I see, it works but without ssh connection... I need make script, which will send this commands after reboot: aif -p partial-configure-network (and write some information about my server ip etc.) /etc/rc.d/sshd start (need to start sshd) echo "sshd: ALL" /etc/hosts.allow (to allow me login to server, by default deny all) passwd (by default its empty, can't login via ssh with empty password) Can I edit .iso or may be /dev/sda? May be I need write script, which will start after system boot and do this things or may be I can set this settings by default and system will start with correct settings (i think its possible at least in 2. and 3.). Thank you!

    Read the article

  • Error deploying Spring with JAX-WS application in Jboss 6 server

    - by arlahiru
    I'm getting this error when I deploying spring+JAX-WS application in jboss server 6.1.0. 09:14:38,175 ERROR [org.springframework.web.context.ContextLoader] Context initialization failed: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'com.sun.xml.ws.transport.http.servlet.SpringBinding#0' defined in ServletContext resource [/WEB-INF/applicationContext.xml]: Cannot create inner bean '(inner bean)' of type [org.jvnet.jax_ws_commons.spring.SpringService] while setting bean property 'service'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name '(inner bean)': FactoryBean threw exception on object creation; nested exception is java.lang.LinkageError: loader constraint violation: when resolving field "DATETIME" the class loader (instance of org/jboss/classloader/spi/base/BaseClassLoader) of the referring class, javax/xml/datatype/DatatypeConstants, and the class loader (instance of <bootloader>) for the field's resolved type, loader constraint violation: when resolving field "DATETIME" the class loader at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveInnerBean(BeanDefinitionValueResolver.java:230) [:2.5.6] at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:122) [:2.5.6] at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245) [:2.5.6] at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010) [:2.5.6] at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472) [:2.5.6] at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409) [:2.5.6] at java.security.AccessController.doPrivileged(Native Method) [:1.7.0_05] at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380) [:2.5.6] at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264) [:2.5.6] at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222) [:2.5.6] at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261) [:2.5.6] at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185) [:2.5.6] at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164) [:2.5.6] at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:429) [:2.5.6] at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:728) [:2.5.6] at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:380) [:2.5.6] at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255) [:2.5.6] at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199) [:2.5.6] at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45) [:2.5.6] at org.apache.catalina.core.StandardContext.contextListenerStart(StandardContext.java:3369) [:6.1.0.Final] at org.apache.catalina.core.StandardContext.start(StandardContext.java:3828) [:6.1.0.Final] at org.jboss.web.tomcat.service.deployers.TomcatDeployment.performDeployInternal(TomcatDeployment.java:294) [:6.1.0.Final] at org.jboss.web.tomcat.service.deployers.TomcatDeployment.performDeploy(TomcatDeployment.java:146) [:6.1.0.Final] at org.jboss.web.deployers.AbstractWarDeployment.start(AbstractWarDeployment.java:476) [:6.1.0.Final] at org.jboss.web.deployers.WebModule.startModule(WebModule.java:118) [:6.1.0.Final] at org.jboss.web.deployers.WebModule.start(WebModule.java:95) [:6.1.0.Final] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) [:1.7.0_05] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) [:1.7.0_05] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [:1.7.0_05] at java.lang.reflect.Method.invoke(Method.java:601) [:1.7.0_05] at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:157) [:6.0.0.GA] at org.jboss.mx.server.Invocation.dispatch(Invocation.java:96) [:6.0.0.GA] at org.jboss.mx.server.Invocation.invoke(Invocation.java:88) [:6.0.0.GA] at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:271) [:6.0.0.GA] at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:670) [:6.0.0.GA] at org.jboss.system.microcontainer.ServiceProxy.invoke(ServiceProxy.java:206) [:2.2.0.SP2] at $Proxy41.start(Unknown Source) at org.jboss.system.microcontainer.StartStopLifecycleAction.installAction(StartStopLifecycleAction.java:53) [:2.2.0.SP2] at org.jboss.system.microcontainer.StartStopLifecycleAction.installAction(StartStopLifecycleAction.java:41) [:2.2.0.SP2] at org.jboss.dependency.plugins.action.SimpleControllerContextAction.simpleInstallAction(SimpleControllerContextAction.java:62) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.action.AccessControllerContextAction.install(AccessControllerContextAction.java:71) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractControllerContextActions.install(AbstractControllerContextActions.java:51) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:379) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.system.microcontainer.ServiceControllerContext.install(ServiceControllerContext.java:301) [:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2044) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1083) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1322) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1246) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1139) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:939) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:654) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.system.ServiceController.doChange(ServiceController.java:671) [:6.1.0.Final (Build SVNTag:JBoss_6.1.0.Final date: 20110816)] at org.jboss.system.ServiceController.start(ServiceController.java:443) [:6.1.0.Final (Build SVNTag:JBoss_6.1.0.Final date: 20110816)] at org.jboss.system.deployers.ServiceDeployer.start(ServiceDeployer.java:189) [:6.1.0.Final] at org.jboss.system.deployers.ServiceDeployer.deploy(ServiceDeployer.java:102) [:6.1.0.Final] at org.jboss.system.deployers.ServiceDeployer.deploy(ServiceDeployer.java:49) [:6.1.0.Final] at org.jboss.deployers.spi.deployer.helpers.AbstractSimpleRealDeployer.internalDeploy(AbstractSimpleRealDeployer.java:63) [:2.2.2.GA] at org.jboss.deployers.spi.deployer.helpers.AbstractRealDeployer.deploy(AbstractRealDeployer.java:55) [:2.2.2.GA] at org.jboss.deployers.plugins.deployers.DeployerWrapper.deploy(DeployerWrapper.java:179) [:2.2.2.GA] at org.jboss.deployers.plugins.deployers.DeployersImpl.doDeploy(DeployersImpl.java:1832) [:2.2.2.GA] at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1550) [:2.2.2.GA] at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.java:1571) [:2.2.2.GA] at org.jboss.deployers.plugins.deployers.DeployersImpl.install(DeployersImpl.java:1491) [:2.2.2.GA] at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext.java:379) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:2044) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:1083) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.executeOrIncrementStateDirectly(AbstractController.java:1322) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1246) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1139) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:939) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:654) [jboss-dependency.jar:2.2.0.SP2] at org.jboss.deployers.plugins.deployers.DeployersImpl.change(DeployersImpl.java:1983) [:2.2.2.GA] at org.jboss.deployers.plugins.deployers.DeployersImpl.process(DeployersImpl.java:1076) [:2.2.2.GA] at org.jboss.deployers.plugins.main.MainDeployerImpl.process(MainDeployerImpl.java:679) [:2.2.2.GA] at org.jboss.system.server.profileservice.deployers.MainDeployerPlugin.process(MainDeployerPlugin.java:106) [:6.1.0.Final] at org.jboss.profileservice.dependency.ProfileControllerContext$DelegateDeployer.process(ProfileControllerContext.java:143) [:0.2.2] at org.jboss.profileservice.plugins.deploy.actions.DeploymentStartAction.doPrepare(DeploymentStartAction.java:98) [:0.2.2] at org.jboss.profileservice.management.actions.AbstractTwoPhaseModificationAction.prepare(AbstractTwoPhaseModificationAction.java:101) [:0.2.2] at org.jboss.profileservice.management.ModificationSession.prepare(ModificationSession.java:87) [:0.2.2] at org.jboss.profileservice.management.AbstractActionController.internalPerfom(AbstractActionController.java:234) [:0.2.2] at org.jboss.profileservice.management.AbstractActionController.performWrite(AbstractActionController.java:213) [:0.2.2] at org.jboss.profileservice.management.AbstractActionController.perform(AbstractActionController.java:150) [:0.2.2] at org.jboss.profileservice.plugins.deploy.AbstractDeployHandler.startDeployments(AbstractDeployHandler.java:168) [:0.2.2] at org.jboss.profileservice.management.upload.remoting.DeployHandlerDelegate.startDeployments(DeployHandlerDelegate.java:74) [:6.1.0.Final] at org.jboss.profileservice.management.upload.remoting.DeployHandler.invoke(DeployHandler.java:156) [:6.1.0.Final] at org.jboss.remoting.ServerInvoker.invoke(ServerInvoker.java:967) [:6.1.0.Final] at org.jboss.remoting.transport.socket.ServerThread.completeInvocation(ServerThread.java:791) [:6.1.0.Final] at org.jboss.remoting.transport.socket.ServerThread.processInvocation(ServerThread.java:744) [:6.1.0.Final] at org.jboss.remoting.transport.socket.ServerThread.dorun(ServerThread.java:548) [:6.1.0.Final] at org.jboss.remoting.transport.socket.ServerThread.run(ServerThread.java:234) [:6.1.0.Final] Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name '(inner bean)': FactoryBean threw exception on object creation; nested exception is java.lang.LinkageError: loader constraint violation: when resolving field "DATETIME" the class loader (instance of org/jboss/classloader/spi/base/BaseClassLoader) of the referring class, javax/xml/datatype/DatatypeConstants, and the class loader (instance of <bootloader>) for the field's resolved type, loader constraint violation: when resolving field "DATETIME" the class loader at org.springframework.beans.factory.support.FactoryBeanRegistrySupport$1.run(FactoryBeanRegistrySupport.java:127) [:2.5.6] at java.security.AccessController.doPrivileged(Native Method) [:1.7.0_05] at org.springframework.beans.factory.support.FactoryBeanRegistrySupport.doGetObjectFromFactoryBean(FactoryBeanRegistrySupport.java:116) [:2.5.6] at org.springframework.beans.factory.support.FactoryBeanRegistrySupport.getObjectFromFactoryBean(FactoryBeanRegistrySupport.java:98) [:2.5.6] at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveInnerBean(BeanDefinitionValueResolver.java:223) [:2.5.6] ... 89 more Caused by: java.lang.LinkageError: loader constraint violation: when resolving field "DATETIME" the class loader (instance of org/jboss/classloader/spi/base/BaseClassLoader) of the referring class, javax/xml/datatype/DatatypeConstants, and the class loader (instance of <bootloader>) for the field's resolved type, loader constraint violation: when resolving field "DATETIME" the class loader at com.sun.xml.bind.v2.model.impl.RuntimeBuiltinLeafInfoImpl.<clinit>(RuntimeBuiltinLeafInfoImpl.java:263) [:2.2] at com.sun.xml.bind.v2.model.impl.RuntimeTypeInfoSetImpl.<init>(RuntimeTypeInfoSetImpl.java:65) [:2.2] at com.sun.xml.bind.v2.model.impl.RuntimeModelBuilder.createTypeInfoSet(RuntimeModelBuilder.java:133) [:2.2] at com.sun.xml.bind.v2.model.impl.RuntimeModelBuilder.createTypeInfoSet(RuntimeModelBuilder.java:85) [:2.2] at com.sun.xml.bind.v2.model.impl.ModelBuilder.<init>(ModelBuilder.java:156) [:2.2] at com.sun.xml.bind.v2.model.impl.RuntimeModelBuilder.<init>(RuntimeModelBuilder.java:93) [:2.2] at com.sun.xml.bind.v2.runtime.JAXBContextImpl.getTypeInfoSet(JAXBContextImpl.java:473) [:2.2] at com.sun.xml.bind.v2.runtime.JAXBContextImpl.<init>(JAXBContextImpl.java:319) [:2.2] at com.sun.xml.bind.v2.runtime.JAXBContextImpl$JAXBContextBuilder.build(JAXBContextImpl.java:1170) [:2.2] at com.sun.xml.bind.v2.ContextFactory.createContext(ContextFactory.java:188) [:2.2] at com.sun.xml.bind.api.JAXBRIContext.newInstance(JAXBRIContext.java:111) [:2.2] at com.sun.xml.ws.developer.JAXBContextFactory$1.createJAXBContext(JAXBContextFactory.java:113) [:2.2.3] at com.sun.xml.ws.model.AbstractSEIModelImpl$1.run(AbstractSEIModelImpl.java:166) [:2.2.3] at com.sun.xml.ws.model.AbstractSEIModelImpl$1.run(AbstractSEIModelImpl.java:159) [:2.2.3] at java.security.AccessController.doPrivileged(Native Method) [:1.7.0_05] at com.sun.xml.ws.model.AbstractSEIModelImpl.createJAXBContext(AbstractSEIModelImpl.java:158) [:2.2.3] at com.sun.xml.ws.model.AbstractSEIModelImpl.postProcess(AbstractSEIModelImpl.java:99) [:2.2.3] at com.sun.xml.ws.model.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:250) [:2.2.3] at com.sun.xml.ws.server.EndpointFactory.createSEIModel(EndpointFactory.java:343) [:2.2.3] at com.sun.xml.ws.server.EndpointFactory.createEndpoint(EndpointFactory.java:205) [:2.2.3] at com.sun.xml.ws.api.server.WSEndpoint.create(WSEndpoint.java:513) [:2.2.3] at org.jvnet.jax_ws_commons.spring.SpringService.getObject(SpringService.java:333) [:] at org.jvnet.jax_ws_commons.spring.SpringService.getObject(SpringService.java:45) [:] at org.springframework.beans.factory.support.FactoryBeanRegistrySupport$1.run(FactoryBeanRegistrySupport.java:121) [:2.5.6] ... 93 more *** DEPLOYMENTS IN ERROR: Name -> Error vfs:///usr/jboss/jboss-6.1.0.Final/server/default/deploy/SpringWS.war -> org.jboss.deployers.spi.DeploymentException: URL file:/usr/jboss/jboss-6.1.0.Final/server/default/tmp/vfs/automountb159aa6e8c1b8582/SpringWS.war-4ec4d0151b4c7d7/ deployment failed DEPLOYMENTS IN ERROR: Deployment "vfs:///usr/jboss/jboss-6.1.0.Final/server/default/deploy/SpringWS.war" is in error due to the following reason(s): org.jboss.deployers.spi.DeploymentException: URL file:/usr/jboss/jboss-6.1.0.Final/server/default/tmp/vfs/automountb159aa6e8c1b8582/SpringWS.war-4ec4d0151b4c7d7/ deployment failed But this application is workinng correctly in glassfish 3.x server and web service is up and running. I'm using Netbeans IDE in Ubuntu 12.04 to build and deploy the application and I couldn't figure out what is the issue here. I guess its about spring and jboss because its working in glassfish smoothly. Please help me to solve this issue. Thanks all in advance.

    Read the article

  • Weblogic 12 and the CLI

    - by Rig
    I am working with WebLogic on Fedora 19 and am attempting to use the CLI tools to no avail. It appears these were deprecated as far back as WebLogic 9 however I was assured they are still there and still functional. As it stands I have a need to use them if they are in fact functional. What appears to the case is that the weblogic jar file is not being loaded correctly to the classpath by this script after trying to manually add it to the classpath as it fails when trying to add those jars via java -classpath <path>. I've spent a lot of time so far trying to get this sorted out but I'm wondering what I may be missing here. My Java runtime is version 7, Fedora is 19, and WebLogic is 12.1. When I run env after running the provided set environment script it appears to have no impact from what I can see. (I'll add that later when I get back to that machine). I'm mostly a Windows developer so some of this is a topic I'm not well versed in. [foo@localhost bin]$ ./setDomainEnv.sh [foo@localhost bin]$ java weblogic.Admin -url t3://localhost:7001 -username <username> -password <password> HELP Error: Could not find or load main class weblogic.Admin [foo@localhost bin]$ ls -ltar total 72 drwxr-x--- 2 foo foo 4096 Jun 2 07:36 service_migration drwxr-x--- 2 foo foo 4096 Jun 2 07:36 server_migration drwxr-x--- 2 foo foo 4096 Jun 2 07:36 nodemanager -rwxr-x--- 1 foo foo 1267 Jun 2 07:36 setStartupEnv.sh -rwxr-x--- 1 foo foo 1105 Jun 2 07:36 startNodeManager.sh -rwxr-x--- 1 foo foo 5765 Jun 2 07:36 startWebLogic.sh -rwxr-x--- 1 foo foo 2001 Jun 2 07:36 stopWebLogic.sh -rwxr-x--- 1 foo foo 3170 Jun 2 07:36 startManagedWebLogic.sh -rwxr-x--- 1 foo foo 2776 Jun 2 07:36 stopManagedWebLogic.sh -rwxrwxrwx 1 foo foo 14136 Jun 2 07:36 setDomainEnv.sh -rwxr-x--- 1 foo foo 2060 Jun 2 07:36 startComponent.sh drwxr-x--- 5 foo foo 4096 Jun 2 07:36 . -rwxr-x--- 1 foo foo 1726 Jun 2 07:36 stopComponent.sh drwxr-x--- 12 foo foo 4096 Jun 2 07:45 ..

    Read the article

  • python mysqldb - mysql server gone away - can't reconnect

    - by david.barkhuizen
    Hi Folks, When attempting to import a bunch of data into mysql tables using python and mysqldb, I run into the following error '2006 - mySQL Server has gone away', and then I am unable to reconnect again within the script. I am iniitially re-using a connection object across transactions ( delineated by conn.commit() ), then when I first encounter this exception, if I create a new connection by calling MySQLdb.connect(), this new connection also fails with the same exception. This error does not occur immediately, I can pump a fair amount of data into the db, but then faithfully occurs after I have inserted a couple thousand records, so roughly once the db has committed a certain transaction volume, it always falls over like this. If I rerun the script, WITHOUT restarting the db server. then it resumes where it left off, pumps in some data, then falls over again. Before recommendations to change time-out timings, does anyone know why I am not able to establish a new connection after the initial failure ? - Even if I try a couple of times waiting a couple of seconds between each. (btw, I'm running Windows 7, mysql server 5.1.48, mysqldb 1.2.3.gamma.1, python 2.6)

    Read the article

  • Process runs slower as a scheduled task than it does interactively

    - by Charlie
    I have a scheduled task which is very CPU- and IO-intensive, and takes about four hours to run (building source code, if you're curious). The task is a Powershell script which spawns various sub-processes to do its work. When I run the same process interactively from a Powershell prompt, as the same user account, it runs in about two and a half hours. The task is running on Windows Server 2008 R2. What I want to know is why it takes so much longer to run as a scheduled task - more than an hour longer. One thing I noticed is that the task scheduler runs at Below-Normal priority, so when my task starts, it inherits the same lowered priority. However, I've updated the script to set the Powershell process priority back to Normal, and it still takes just as long. Anybody have an idea what could be different between the two scenarios? I've ruled out differences in processor and IO load - this task is the only thing the system is used for, so there's nothing else running that could be competing for resources.

    Read the article

  • Recent ImageMagick on CentOS 6.3

    - by organicveggie
    I'm having a terrible time trying to get a recent version of ImageMagick installed on a CentOS 6.3 x86_64 server. First, I downloaded the RPM from the ImageMagick site and tried to install it. That failed due to missing dependencies: error: Failed dependencies: libHalf.so.4()(64bit) is needed by ImageMagick-6.8.0-4.x86_64 libIex.so.4()(64bit) is needed by ImageMagick-6.8.0-4.x86_64 libIlmImf.so.4()(64bit) is needed by ImageMagick-6.8.0-4.x86_64 libImath.so.4()(64bit) is needed by ImageMagick-6.8.0-4.x86_64 libltdl.so.3()(64bit) is needed by ImageMagick-6.8.0-4.x86_64 I have libtool-ltdl installed, but that includes libltdl.so.7, not libltdl.so.4. I have a similar problem with libHalf, libIex, libIlmImf and libImath. Typically, you can install OpenEXR to get those dependencies. Unfortunately, CentOS 6.3 includes OpenEXR 1.6.1, which includes ilmbase-devel 1.0.1. And that release of ilmbase-devel includes newer versions of those dependencies: libHalf.so.6 libIex.so.6 libIlmImf.so.6 libImath.so.6 I next tried following the instructions for installing ImageMagick from source. No luck there either. I get a build error: RPM build errors: File not found by glob: /home/sean/rpmbuild/BUILDROOT/ImageMagick-6.8.0-4.x86_64/usr/lib64/ImageMagick-6.8.0/modules-Q16/coders/djvu.* I even re-ran configure to explicitly exclude djvu and I still get the same error. At this point, I'm pulling my hair out. What's the easiest way to get a relatively recent version of ImageMagick ( 6.7) installed on CentOS 6.3? Does someone offer RPMs with dependencies somewhere?

    Read the article

  • Crash dump analysis

    - by Ryan Ries
    I hope this isn't a stupid question, and if it is, then I want to at least get it over with so I don't feel so dumb in the future. Here we are, loading up a Windows crash dump with Windbg. Here are the first few lines of the debugger output: 0: kd> .dumpdebug ----- 64 bit Kernel Summary Dump Analysis DUMP_HEADER64: MajorVersion 0000000f MinorVersion 00001db1 ... The MinorVersion I mostly understand. It's hexadecimal and it translates to 7601 in decimal. Windows admins would already be able to tell from that that this must be either a Win7 x64 machine or a 2k8 R2 machine with SP1. But isn't 7601 the build number? It's supposed to be Major.Minor.Build/Revision... right? Also I don't understand the MajorVersion. It should be 6. This version of Windows is 6. But isn't 0000000f in hexadecimal 15 in decimal? The full version string of this version of Windows, when you launch the Command Prompt for instance, is 6.1.7601. If 7601 is the MinorVersion, then what is 1 and what is 6? And why does the crash dump say 0F?

    Read the article

  • Force Windows Local Subnet Traffic through a Gateway

    - by Beerey
    Hi all, We are attempting to route all traffic from a certain machine to a gateway. This works ok for traffic destined for subnets outside of the machine's subnet. However, traffic to machines in the same subnet as the source machine goes through an On-Link gateway in Windows. This means that the default gateway is ignored, and traffic in a subnet (for example, 192.168.50.10 - 192.168.50.11) flows. Destination Netmask Gateway Interface Metric 192.168.50.0 255.255.255.0 On-link 192.168.50.214 276 This route can be deleted from Windows, but when the machine is rebooted it always comes back. Adding a persistant static route to the gateway with a lower metric doesn't work, since it will still try the On-Link gateway after the persistant route fails. Adding each machine in a VLAN isn't an option due to the setup we have Adding a startup script to delete the gateway isn't a great option either, since users will have full admin access to the machine and might disable the script. We cannot transperantly intercept all network traffic on the subnet using Gratuitous ARPs or transparent proxying, since there are other machines on the subnet which use a different gateway The only way we have gotten it to work is by adding a persistant route to the gateway for the subnet traffic, and deleting the On-link route on reboot. The question is then. Is there a way to permanently remove this On-link route If not, is there a way to otherwise force even local subnet traffic to go through a gateway?

    Read the article

  • wget not working with domain on local machine

    - by user568829
    Basically - I have some PHP scripts that need to be run as cron jobs. Lets say the script needing to be run is: http://admin.somedomain.com/cron_jobs/get_stats If I run the script from the local machine it gives me a 404 Not Found error. So I entered the following into /etc/hosts XX.XX.XX.45 admin.somedomain.com Now wget works fine from the local machine to that domain. However when I restart Apache that domain no longer works. Here is the config for that site in /etc/apache2/sites-available NameVirtualHost XX.XX.XX.45:80 <VirtualHost XX.XX.XX.45:80> ServerName admin.somedomain.com DocumentRoot /var/www/admin.somedomain.com/ <Directory "/var/www/admin.somedomain.com"> allowoverride all Options Indexes order deny,allow allow from all </Directory> ErrorLog /var/log/apache2/admin.somedomain.com-error_log CustomLog /var/log/apache2/admin.somedomain.com-access_log combined </VirtualHost> It just goes to the default site config showing "It Works". If I take out that setting in /etc/hosts and restart apache the website at that domain works fine again. Can anyone point me in the right direction here? Thanks

    Read the article

  • How to register an agent with launchd

    - by Konrad Rudolph
    I’m unable to schedule a periodic launch with launchctl/launchd on OS X (Leopard). Basically, I’m unable to find a step-by-step list of instructions on the web and the intuitive approach doesn’t work. The sync.plist file: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>net.madrat.utils.sync</string> <key>Program</key> <string>rsync</string> <key>ProgramArguments</key> <array> <string>-ar</string> <string>/path/to/folder/</string> <string>/path/to/backup/</string> </array> <key>StartInterval</key> <integer>7200</integer> </dict> </plist> I’ve put this script inside the path ~/Library/LaunchAgents. Next, I’ve registered the script using launchctl load ~/Library/LaunchAgents/sync.plist Finally, to test that it works, I started the job: launchctl start net.madrat.utils.sync – Nothing happened. Manually executing the rsync command in the terminal yields the expected result. I’m fairly sure that the job was registered correctly because if I try to start a non-existing job, I get an error message (which I didn’t get in the above command). What did I do wrong?

    Read the article

  • How does a vsftpd server work and how to configure it?

    - by ysap
    I was asked to configure a FTP server, based on the vsftpd package. The server is running on a remote machine to which I have a superuser privilege access. Being unfamiliar with the mechanics of FTP servers, I tried to figure out how user ftp accounts are configured. The previous maintainer used a shell script, which works on a list that we maintain to track users accounts and passwords, to configure the ftp accounts. From reading the script, I see that he generates a list of usernames and passwords, and actually creates a user account on the Linux machine. This means that for each user that we configure in the list, a new user account is being added by the adduser command: adduser --home /home/ftp --no-create-home $user (but w/o a private /home/username directory - using the /home/ftp instaed). Each of these users can log into his account using the ssh command. This fact seems a little strange to me, as I'd think that the ftp account should be decoupled from the Ubuntu user accounts. As another side effect, when a user connects using a web browser, he is connected to the /home/ftp directory. However, he can then use "Up to a higher level directory" link to go up and effectively have access to all of our system. So, the questions are: Is this really how the FTP server supposed to work in terms of configuring ftp accounts? If not, how do I configure the vsftpd server in a way that I have only the superuser Ubuntu account on that machine and all ftp account are... just FTP user accounts? Additionally, these ftp account should be configured in terms of how and what they are allowed to access.

    Read the article

  • Monitor Exchange Email Address and run scripts

    - by WernerCD
    Okay... Not sure how "out there" this thought is... Right now to send a pager message (aka text message), a user logs into our AS400... logs into the program... enters user name and message and hit's F10 to send. With a little looking, it seems that you can run remote commands to the AS400 via FTP. So I'm working on building a script (batch or otherwise) that, given two parameters (user, message), will FTP into the AS400 and run a remote command: c:\>ftp server user: admin password: ***** ftp> quote rcmd SNDPGRMSG TOPGR(JDOE) MSG('This is a Test') ftp> quit So... what I want to do is setup an email account on our Exchange server Monitor the account for incoming mail upon receipt of incoming mail, parse it... say for example subject is defined as "Recipient" and email text is defined as "Pager message" run a batch that uses the above mentioned TOPGR and MSG as parameters... via FTP to the AS400 mark email as "read" The main thing I'm not sure about is monitoring an exchange account and running a script on incoming emails. I'm sure what I want to do is possible... but where would I start? EDIT: Clarification The main reasons for using this four part system are logging (messages sent via this are logged and reported by the AS400 program) and the existing scheduler for redirecting pages (For example, the weekly on-call person = TOPGR(oncall) gets updated by the AS400 program). I'm also trying to remove duplicate work. If I can get this setup working, I can redirect pages from OTHER systems into this one. I then don't have to update 2, soon to be 3, systems with current phone numbers, carriers, on-call schedules, etc. System #2 and #3 can just "email" [email protected].

    Read the article

  • memcached append() php ubuntu - bad protocol

    - by awongh
    I am running ubuntu gutsy(7.1) , php5 and I am trying to get memcached running locally. I installed everything as per the docs: memcached daemon, php PECL extension, libevent, etc. But now I can only run half of the example script for memcached append(): <?php $m = new Memcached(); $m->addServer('localhost', 11211); $m->setOption(Memcached::OPT_COMPRESSION, false); $m->set('foo', 'abc'); $m->append('foo', 'def'); var_dump($m->get('foo')); ?> the script terminates @ append() with an RES_BAD_PROTOCOL error message. It still runs the get(). I don't know why memcached would otherwise be working fine (connect, set, get - with the correct value of 'abc') and not work for append. it also doesnt work with prepend. I believe I have the setup correct, but I am not sure. Maybe there are compatibility problems between the versions of the dependecies? thanks much

    Read the article

  • Why do weekly tasks created via PowerShell using a different user fail with error 0x41306

    - by Danny Tuppeny
    We have some scripts that create scheduled jobs using PowerShell as part of our application. When testing them recently, I noticed that some of them always failed immediately, and no output is ever produced (they don't even appear in the Get-Job list). After many days of tweaking, we've managed to isolate it to any jobs that are set to run weekly. Below is a script that creates two jobs that do exactly the same thing. When we run this on our domain, and provide credentials of a domain user, then force both jobs to run in the Task Scheduler GUI (right-click - Run), the daily one runs fine (0x0 result) and the weekly one fails (0x41306). Note: If I don't provide the -Credential param, both jobs work fine. The jobs only fail if the task is both weekly, and running as this domain user. I can't find information on why this is happening, nor think of any reason it would behave differently for weekly jobs. The "History£ tab in the Task Scheduler has almost no useful information, just "Task stopping due to user request" and "Task terminated", both of which have no useful info: Task Scheduler terminated "{eabba479-f8fc-4f0e-bf5e-053dfbfe9f62}" instance of the "\Microsoft\Windows\PowerShell\ScheduledJobs\Test1" task. Task Scheduler stopped instance "{eabba479-f8fc-4f0e-bf5e-053dfbfe9f62}" of task "\Microsoft\Windows\PowerShell\ScheduledJobs\Test1" as request by user "MyDomain\SomeUser" . What's up with this? Why do weekly tasks run differently, and how can I diganose this issue? This is PowerShell v3 on Windows Server 2008 R2. I've been unable to reproduce this locally, but I don't have a user set up in the same way as the one in our production domain (I'm working on this, but I wanted to post this ASAP in the hope someone knows what's happening!). Import-Module PSScheduledJob $Action = { "Executing job!" } $cred = Get-Credential "MyDomain\SomeUser" # Remove previous versions (to allow re-running this script) Get-ScheduledJob Test1 | Unregister-ScheduledJob Get-ScheduledJob Test2 | Unregister-ScheduledJob # Create two identical jobs, with different triggers Register-ScheduledJob "Test1" -ScriptBlock $Action -Credential $cred -Trigger (New-JobTrigger -Weekly -At 1:25am -DaysOfWeek Sunday) Register-ScheduledJob "Test2" -ScriptBlock $Action -Credential $cred -Trigger (New-JobTrigger -Daily -At 1:25am)

    Read the article

  • Default or fink python and lxml under 10.6.8

    - by songdogtech
    Ah, confusion. I'm trying to install a python library called lxml as needed by a python script. I've been through numerous SU quesitons and answers. I haven't been able to make much progress. I run easy_install lxml and get: Processing lxml-3.0.1-py2.6-macosx-10.6-universal.egg lxml 3.0.1 is already the active version in easy-install.pth Using /Library/Python/2.6/site-packages/lxml-3.0.1-py2.6-macosx-10.6-universal.egg Processing dependencies for lxml Finished processing dependencies for lxml but when I run my script, I get: File "scraper.py", line 3, in import lxml.html File "/Library/Python/2.6/site-packages/lxml-3.0.1-py2.6-macosx-10.6-universal.egg/lxml/html/init.py", line 42, in from lxml import etree ImportError: dlopen(/Library/Python/2.6/site-packages/lxml-3.0.1-py2.6-macosx-10.6-universal.egg/lxml/etree.so, 2): Symbol not found: _htmlParseChunk Referenced from: /Library/Python/2.6/site-packages/lxml-3.0.1-py2.6-macosx-10.6-universal.egg/lxml/etree.so Expected in: flat namespace in /Library/Python/2.6/site-packages/lxml-3.0.1-py2.6-macosx-10.6-universal.egg/lxml/etree.so I think that maybe I'm not using the correct python install? I've installed python with fink, but should I use OS X's python? This is in my .profile: test -r /sw/bin/init.sh && . /sw/bin/init.sh which points to the fink install. echo $PATH gives me: /sw/bin:/sw/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/usr/X11R6/bin Should I change that to point to snow leopard's python? (Which is 2.6.1) In Library/, there is: which are the lxml libaries I need, it appears, as well as requests. And whereis python gives me /usr/bin/python What do I do? How do I get python to use these libraries. And which python?

    Read the article

  • Making OpenSSL work on PHP Windows 2008 server with FastCGI

    - by KacieHouser
    I have been researching all day. Here is what I have done: In C:/PHP/php.ini and C:/PHP/php-cgi-fcgi.ini I have made the extension_dir = "C:/PHP/ext" I uncommented extension=php_openssl.dll I went to http://windows.php.net/download/ and got the thread safe version with the PHP 5.4 (5.4.8) version of DLL's In C:/PHP/ext I replaced the php_openssl.dll with the one I downloaded In System32 and SysWOW64 I added the following DLL's ssleay.dll libeay.dll I restarted the IIS server in the Server Manager under Web Server and stopped and started the World Wide Web Publishing Service That didn't work, so I tried same thing with the unthreaded versions. I still get: Fatal error: Call to undefined function ftp_ssl_connect() in C:\inetpub\wwwroot\REMOVED_dev\save_data.php on line 5 Here are related things from phpinfo(): System Windows NT DEV-WEB1 6.1 build 7601 (Windows Server 2008 R2 Standard Edition Service Pack 1) i586 Compiler MSVC9 (Visual C++ 2008) Architecture x86 Configure Command cscript /nologo configure.js "--enable-snapshot-build" "--enable-debug-pack" "--disable-zts" "--disable-isapi" "--disable-nsapi" "--without-mssql" "--without-pdo-mssql" "--without-pi3web" "--with-pdo-oci=C:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8=C:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8-11g=C:\php-sdk\oracle\instantclient11\sdk,shared" "--with-enchant=shared" "--enable-object-out-dir=../obj/" "--enable-com-dotnet" "--with-mcrypt=static" "--disable-static-analyze" "--with-pgo" Server API CGI/FastCGI Configuration File (php.ini) Path C:\Windows Loaded Configuration File C:\PHP\php-cgi-fcgi.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) Registered PHP Streams php, file, glob, data, http, ftp, zip, compress.zlib, compress.bzip2, https, ftps, sqlsrv, phar Registered Stream Socket Transports tcp, udp, ssl, sslv3, sslv2, tls FTP support enabled Protocols dict, file, ftp, ftps, gopher, http, https, imap, imaps, ldap, pop3, pop3s, rtsp, scp, sftp, smtp, smtps, telnet, tftp openssl OpenSSL support enabled OpenSSL Library Version OpenSSL 0.9.8t 18 Jan 2012 OpenSSL Header Version OpenSSL 0.9.8x 10 May 2012 What am I missing here?

    Read the article

  • Server Performance

    - by sb12
    I know very little about performance tuning of servers etc... so i thought i'd put this up here as i start some research on it, just to get some direction. I am in the process of migrating from my old server to a new one - both are 64 bit machines. One is a few years old, the other brand new (PowerEdge R410). The old server spec is: 2 cpus, 3.4GHz Pentiums, 8G of RAM, Fedora 11 currently installed The new server spec is: 16 cpus, 3.2 GHz Xeon, 16G of RAM, CentOS 6.2 installed. Also RAID10 is on the new server - no RAID on the old one. Both servers currently have the same database (MySQL) with the same data migrated. I wrote a Perl script that simply steps through each row of a table in the database (about 18000 rows) and updates a value in that row. Every row in the table is updated. Out of curiosity i ran this perl script on both machines, just to see how the new server would perform vs. the old one, and it produced interesting results: The old server was twice as fast as the new one to complete. Looking at the database, both are configured exactly the same (the new one being a dump of the old one...)... Anyone any ideas why this would be given the hardware gap between both? As i said i'm about to start some digging, but thought i'd put this up here to maybe get some good direction.... Many thanks in advance..

    Read the article

  • Selenium server causes crazy load on server - how to prevent?

    - by Eric
    I'm running this linux: Linux host.themepark.com 2.6.32-220.4.1.el6.x86_64 #1 SMP Tue Jan 24 02:13:44 GMT 2012 x86_64 x86_64 x86_64 GNU/Linux And I run the Selenium stand-alone server on my box with this command: java -jar /home/l/cron/selenium-server-standalone-2.24.1.jar > /logs/selenium.log 2>&1 & Here's the problem: as soon as I do that, the server load starts skyrocketing. I even went back and downloaded older versions of the Selenium server, but same results with 2.23.1, 2.23.0, and 2.19.0. Note that the server load starts going nuts before I issue ANY commands to Selenium or do anything else. All I'm doing is firing up the server, per the command above. This used to work perfectly on my server without causing massive server load, so something has changed, but I'm not sure what. My server is a managed VPS so I don't know if there is some kind of auto-update script that kicked in or what... but it's a problem. (Incidentally, even though the server load climbs like crazy, everything still works: after firing up Selenium, my server creates a screen with Xvfb so Firefox will be happy, then a PHP script talks to Selenium to do what it needs to do before shutting everything down. It takes a LONG time, and the load gets all the way up to 8 [!!!] before it is finished, which kills my web server and makes the main site horribly unresponsive... but it does get everything done.) Any suggestions for what is going on, why it's started doing this and/or, most importantly, how I can make Selenium not kill the server when it starts up... would be GREATLY appreciated!

    Read the article

  • How can I install Satchmo?

    - by Jonathan Hayward
    I am trying to install Satchmo 0.9 on an Ubuntu 9.10 32-bit guest off of the instructions at http://bitbucket.org/chris1610/satchmo/downloads/Satchmo.pdf. I run into difficulties at 2.1.2: pip install -r http://bitbucket.org/chris1610/satchmo/raw/tip/scripts/requirements.txt pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo The first command fails because a compile error for how it's trying to build PIL. So I ran an "aptitude install python-imaging", locally copy the first line's requirements.text, and remove the line that's unsuccessfully trying to build PIL. The first line completes without reported error, as does the second. The next step tells me to change directory to the /path/to/new/store, and run: python clonesatchmo.py A little bit of trouble here; I am told that clonesatchmo.py will be in /bin by now, and it isn't there, but I put some Satchmo stuff under /usr/local, create a symlink in /bin, and run: python /bin/clonesatchmo.py This gives: jonathan@ubuntu:~/store$ python /bin/clonesatchmo.py Creating the Satchmo Application Traceback (most recent call last): File "/bin/clonesatchmo.py", line 108, in <module> create_satchmo_site(opts.site_name) File "/bin/clonesatchmo.py", line 47, in create_satchmo_site import satchmo_skeleton ImportError: No module named satchmo_skeleton A find after apparently checking out the repository reveals that there is no file with a name like satchmo*skeleton* on my system. I thought that bash might be prone to take part of the second pip invocation's URL as the beginning of a comment; I tried both: pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9\#egg=satchmo pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo Neither way of doing it seems to take care of the import error mentioned above. How can I get a Satchmo installation under Ubuntu, or at least enough of a Satchmo installation that I am able to start with a skeleton of a store and then flesh it out the way I want? Thanks, Jonathan

    Read the article

  • upstart config to start sync daemon as non-root user

    - by Rudiger Wolf
    I am planning to use inosync to sync data from master server to several client servers. I have created a user called rsyncuser in both master and slaves with access permissions and passwordless ssh access from master to slave servers. Inosync is working when I use it from the command line as rsyncuser. Next I want this to start automatically when server is turned on. I figured upstart is the way to get this working. I am unable to find the right upstart command to get this working. Here is my upstart conf file. The problem seems to be around running "inosync -d -c /etc/inosync/inosync_rsyncuser.py" as a given user. As you can see I have tried a number of various options! description "start inosync to sync data to other CDN Servers as rsyncuser" console output #start on startup #stop on shutdown start on (net-device-up and local-filesystems) stop on runlevel [016] #start on runlevel [2345] #stop on runlevel [!2345] #kill timeout 30 env RUN_AS_USER=rsyncuser expect fork script echo "Inosync updtart job seems to have started" /tmp/upstart.log # exec sudo -u rsyncuser -c "ls -la" /tmp/upstart.log 2&1 # LOGFILE=/var/log/logfile.`date +%Y-%m-%d`.log # exec su - $RUN_AS_USER -c "inosync -d -c /etc/inosync/inosync_rsyncuser.py" $LOGFILE 2&1 # exec su -c "ls -la" /tmp/upstart.log 2&1 # emit inosync_running end script

    Read the article

  • Compiling mod_auth_kerb on OS X

    - by bshacklett
    I'm trying to get mod_auth_kerb installed, but I can't seem to find any information on compiling it on OS X. I'm getting the following when I attempt to compile: ./apxs.sh "-I. -Ispnegokrb5 -I/include " "-dynamic -g -O2 -arch x86_64 -Wl,-search_paths_first -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lresolv -lresolv" "" "/Applications/XAMPP/xamppfiles/bin/apxs" "-c" "src/mod_auth_kerb.c" /Applications/XAMPP/xamppfiles/build/libtool --silent --mode=compile gcc -prefer-pic -I/Applications/XAMPP/xamppfiles/include -L/Applications/XAMPP/xamppfiles/lib -mmacosx-version-min=10.4 -arch i386 -arch ppc -DDARWIN -DSIGPROCMASK_SETS_THREAD_MASK -no-cpp-precomp -I/Applications/XAMPP/xamppfiles/include -I/Applications/XAMPP/xamppfiles/include -I/Applications/XAMPP/xamppfiles/include -I/Applications/XAMPP/xamppfiles/include -I. -Ispnegokrb5 -I/include -c -o src/mod_auth_kerb.lo src/mod_auth_kerb.c && touch src/mod_auth_kerb.slo src/mod_auth_kerb.c: In function ‘authenticate_user_krb5pwd’: src/mod_auth_kerb.c:1030: warning: passing argument 8 of ‘verify_krb5_user’ discards qualifiers from pointer target type src/mod_auth_kerb.c: In function ‘authenticate_user_krb5pwd’: src/mod_auth_kerb.c:1030: warning: passing argument 8 of ‘verify_krb5_user’ discards qualifiers from pointer target type /Applications/XAMPP/xamppfiles/build/libtool --silent --mode=link gcc -o src/mod_auth_kerb.la -dynamic -g -O2 -arch x86_64 -Wl,-search_paths_first -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lresolv -lresolv -rpath /Applications/XAMPP/xamppfiles/modules -module -avoid-version src/mod_auth_kerb.lo ld: warning: in src/.libs/mod_auth_kerb.o, missing required architecture x86_64 in file warning: no debug symbols in executable (-arch x86_64) I'm configuring as follows: ./configure --with-krb4=no CFLAGS='-g -O2 -arch x86_64' I should mention that I'm using XAMPP with the development package on this machine.

    Read the article

< Previous Page | 616 617 618 619 620 621 622 623 624 625 626 627  | Next Page >