Search Results

Search found 17686 results on 708 pages for 'high level'.

Page 620/708 | < Previous Page | 616 617 618 619 620 621 622 623 624 625 626 627  | Next Page >

  • Protecting Consolidated Data on Engineered Systems

    - by Steve Enevold
    In this time of reduced budgets and cost cutting measures in Federal, State and Local governments, the requirement to provide services continues to grow. Many agencies are looking at consolidating their infrastructure to reduce cost and meet budget goals. Oracle's engineered systems are ideal platforms for accomplishing these goals. These systems provide unparalleled performance that is ideal for running applications and databases that traditionally run on separate dedicated environments. However, putting multiple critical applications and databases in a single architecture makes security more critical. You are putting a concentrated set of sensitive data on a single system, making it a more tempting target.  The environments were previously separated by iron so now you need to provide assurance that one group, department, or application's information is not visible to other personnel or applications resident in the Exadata system. Administration of the environments requires formal separation of duties so an administrator of one application environment cannot view or negatively impact others. Also, these systems need to be in protected environments just like other critical production servers. They should be in a data center protected by physical controls, network firewalls, intrusion detection and prevention, etc Exadata also provides unique security benefits, including a reducing attack surface by minimizing packages and services to only those required. In addition to reducing the possible system areas someone may attempt to infiltrate, Exadata has the following features: 1.    Infiniband, which functions as a secure private backplane 2.    IPTables  to perform stateful packet inspection for all nodes               Cellwall implements firewall services on each cell using IPTables 3.    Hardware accelerated encryption for data at rest on storage cells Oracle is uniquely positioned to provide the security necessary for implementing Exadata because security has been a core focus since the company's beginning. In addition to the security capabilities inherent in Exadata, Oracle security products are all certified to run in an Exadata environment. Database Vault Oracle Database Vault helps organizations increase the security of existing applications and address regulatory mandates that call for separation-of-duties, least privilege and other preventive controls to ensure data integrity and data privacy. Oracle Database Vault proactively protects application data stored in the Oracle database from being accessed by privileged database users. A unique feature of Database Vault is the ability to segregate administrative tasks including when a command can be executed, or that the DBA can manage the health of the database and objects, but may not see the data Advanced Security  helps organizations comply with privacy and regulatory mandates by transparently encrypting all application data or specific sensitive columns, such as credit cards, social security numbers, or personally identifiable information (PII). By encrypting data at rest and whenever it leaves the database over the network or via backups, Oracle Advanced Security provides the most cost-effective solution for comprehensive data protection. Label Security  is a powerful and easy-to-use tool for classifying data and mediating access to data based on its classification. Designed to meet public-sector requirements for multi-level security and mandatory access control, Oracle Label Security provides a flexible framework that both government and commercial entities worldwide can use to manage access to data on a "need to know" basis in order to protect data privacy and achieve regulatory compliance  Data Masking reduces the threat of someone in the development org taking data that has been copied from production to the development environment for testing, upgrades, etc by irreversibly replacing the original sensitive data with fictitious data so that production data can be shared safely with IT developers or offshore business partners  Audit Vault and Database Firewall Oracle Audit Vault and Database Firewall serves as a critical detective and preventive control across multiple operating systems and database platforms to protect against the abuse of legitimate access to databases responsible for almost all data breaches and cyber attacks.  Consolidation, cost-savings, and performance can now be achieved without sacrificing security. The combination of built in protection and Oracle’s industry-leading data protection solutions make Exadata an ideal platform for Federal, State, and local governments and agencies.

    Read the article

  • Managing Operational Risk of Financial Services Processes – part 1/ 2

    - by Sanjeevio
    Financial institutions view compliance as a regulatory burden that incurs a high initial capital outlay and recurring costs. By its very nature regulation takes a prescriptive, common-for-all, approach to managing financial and non-financial risk. Needless to say, no longer does mere compliance with regulation will lead to sustainable differentiation.  Genuine competitive advantage will stem from being able to cope with innovation demands of the present economic environment while meeting compliance goals with regulatory mandates in a faster and cost-efficient manner. Let’s first take a look at the key factors that are limiting the pursuit of the above goal. Regulatory requirements are growing, driven in-part by revisions to existing mandates in line with cross-border, pan-geographic, nature of financial value chains today and more so by frequent systemic failures that have destabilized the financial markets and the global economy over the last decade.  In addition to the increase in regulation, financial institutions are faced with pressures of regulatory overlap and regulatory conflict. Regulatory overlap arises primarily from two things: firstly, due to the blurring of boundaries between lines-of-businesses with complex organizational structures and secondly, due to varying requirements of jurisdictional directives across geographic boundaries e.g. a securities firm with operations in US and EU would be subject different requirements of “Know-Your-Customer” (KYC) as per the PATRIOT ACT in US and MiFiD in EU. Another consequence and concomitance of regulatory change is regulatory conflict, which again, arises primarily from two things: firstly, due to diametrically opposite priorities of line-of-business and secondly, due to tension that regulatory requirements create between shareholders interests of tighter due-diligence and customer concerns of privacy. For instance, Customer Due Diligence (CDD) as per KYC requires eliciting detailed information from customers to prevent illegal activities such as money-laundering, terrorist financing or identity theft. While new customers are still more likely to comply with such stringent background checks at time of account opening, existing customers baulk at such practices as a breach of trust and privacy. As mentioned earlier regulatory compliance addresses both financial and non-financial risks. Operational risk is a non-financial risk that stems from business execution and spans people, processes, systems and information. Operational risk arising from financial processes in particular transcends other sources of such risk. Let’s look at the factors underpinning the operational risk of financial processes. The rapid pace of innovation and geographic expansion of financial institutions has resulted in proliferation and ad-hoc evolution of back-office, mid-office and front-office processes. This has had two serious implications on increasing the operational risk of financial processes: ·         Inconsistency of processes across lines-of-business, customer channels and product/service offerings. This makes it harder for the risk function to enforce a standardized risk methodology and in turn breaches harder to detect. ·         The proliferation of processes coupled with increasingly frequent change-cycles has resulted in accidental breaches and increased vulnerability to regulatory inadequacies. In summary, regulatory growth (including overlap and conflict) coupled with process proliferation and inconsistency is driving process compliance complexity In my next post I will address the implications of this process complexity on financial institutions and outline the role of BPM in lowering specific aspects of operational risk of financial processes.

    Read the article

  • Sunshine after the iCloud release?

    - by Laila
    "Why should I believe them? They're the ones that brought us MobileMe? It was not our finest hour, but we learned a lot." Steve Jobs June 6th 2011 Apple's new cloud service has been met with uncritical excitement by industry commentators.  It is wonderful what a rename can do.  Apple has had a 'cloud' offering for three years called MobileMe, successor to .MAC and  iTools, so iCloud is now the fourth internet service Apple have attempted. If this had been Microsoft, there would have been catcalls all around the blogosphere.  I'll admit that there is a lot more functionality announced for iCloud than MobileMe has ever managed to achieve, but then almost anything has more functionality than MobileMe.  It's an expensive service (£120 a year in the UK, $90 in the states), launched as far back as  June 9, 2008, that has delivered very little and suffered a string of technical problems; the documentation was mainly  a community effort, built up gradually by the frustrated and angry users. It was supposed to synchronise PC Outlook calendars but couldn't manage Microsoft Exchange (Google could, of course). It used WebDAV to allow Windows users to attach to the filestore, but didn't document how to do it. The method for downloading and uploading files to the cloud-based filestore was ridiculously clunky. It allowed you to post photos on a public site, but forgot to include a way of deleting photos. I could go on with the list, but you can explore the many sites that have flourished to inhabit the support-vacuum left by Apple. MobileMe should have had all the bright new clever things announced for iCloud. Apple dropped the ball, and allowed services such as Flickr to fill the void. However, their PR skills are such that, a name-change later (the .ME.com email address remains), it has turned a rout into a victory, and hundreds of earnest bloggers have been extolling Apple's expertise in cloud matters. This must be frustrating for the other cloud providers who have quietly got the technology working right. I wish iCloud well, even though I resent the expensive mess they made of MobileMe. Apple promise that iCloud will sync files, apps, app data, and media across all the different iOS5 devices, Macs, and PCs. It also hopes to sync music across devices, but not video content. They've offered existing MobileMe users free use of the MobileMe service for a year as the product is morphed, and they will be able to transfer to iCloud when it is launched in the autumn.  On June 30, 2012, MobileMe will die, and Apple's iWeb is also soon to join iTools and .MAC in the hereafter. So why get excited about iCloud? That all depends on the level of PC integration. Whereas iOS5 machines will be full participants in the new world of data-sharing (Sorry iPod Touch users) what about .NET libraries? There is talk of synchronising 'My Pictures' libraries with iOS5 and iMac machines, but little more detail as yet. Apple has a lot to prove with iCloud and anyone with actual experience of their past attempts to get into cloud services will be wary.

    Read the article

  • Wireless cycling between connected and disconnected

    - by Tony Kilgore
    My friend has a Acer Aspire 5733Z-4851 it keeps disconnecting and connecting to his wifi but his hard wire will run just fine. Any suggestions? All the codes: lspci: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) lsmod: Module Size Used by snd_seq_dummy 12798 0 rfcomm 46619 0 bnep 18140 2 bluetooth 209199 10 rfcomm,bnep parport_pc 32688 0 ppdev 17073 0 lp 17759 0 parport 46345 3 parport_pc,ppdev,lp binfmt_misc 17500 1 ums_realtek 17949 0 snd_hda_codec_realtek 77876 1 uas 17844 0 coretemp 13400 0 snd_hda_intel 33491 4 snd_hda_codec 134212 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 96580 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30512 1 snd_seq_midi uvcvideo 76749 0 videobuf2_core 32851 1 uvcvideo videodev 120309 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12860 1 uvcvideo videobuf2_memops 13368 1 videobuf2_vmalloc snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61521 3 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event snd_timer 29425 2 snd_pcm,snd_seq arc4 12529 2 snd_seq_device 14497 4 snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq psmouse 95552 0 ath9k 131308 0 tg3 148780 0 snd 78734 17 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device microcode 22803 0 mac80211 539908 1 ath9k ath9k_common 14055 1 ath9k ath9k_hw 395218 2 ath9k,ath9k_common ath 23827 3 ath9k,ath9k_common,ath9k_hw i915 520629 3 soundcore 15047 1 snd serio_raw 13215 0 cfg80211 206566 3 ath9k,mac80211,ath snd_page_alloc 18484 2 snd_hda_intel,snd_pcm intel_ips 18049 0 lpc_ich 17061 0 drm_kms_helper 46784 1 i915 drm 275528 4 i915,drm_kms_helper mei 40690 0 i2c_algo_bit 13413 1 i915 joydev 17457 0 acer_wmi 32453 0 sparse_keymap 13890 1 acer_wmi mxm_wmi 12979 0 mac_hid 13205 0 wmi 19070 2 acer_wmi,mxm_wmi video 19335 2 i915,acer_wmi usb_storage 48838 1 ums_realtek sudo lshw -C network: *-network description: Ethernet interface product: NetLink BCM57780 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: b8:70:f4:9a:35:b6 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=half firmware=sb latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:44 memory:d3400000-d340ffff[/QUOTE][QUOTE]*-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 68:a3:c4:eb:60:7d width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-19-generic firmware=N/A ip=192.168.0.168 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d2400000-d240ffff)

    Read the article

  • jtreg update, December 2012

    - by jjg
    There is a new version of jtreg available. The primary new feature is support for tests that have been written for use with TestNG, the popular open source testing framework. TestNG is supported by a variety of tools and plugins, which means that it is now possible to develop tests for OpenJDK using those tools, while still retaining the ability to have the tests be part of the OpenJDK test suite, and run with a single test harness, jtreg. jtreg can be downloaded from the OpenJDK jtreg page: http://openjdk.java.net/jtreg. TestNG support jtreg supports both single TestNG tests, which can be freely intermixed with other types of jtreg tests, and groups of TestNG tests. A single TestNG test class can be compiled and run by providing a test description using the new action tag: @run testng classname The test will be executed by using org.testng.TestNG. No main method is required. A group of TestNG tests organized in a standard package hierarchy can also be compiled and run by jtreg. Any such group must be identified by specifying the root directory of the package hierarchy. You can either do this in the top level TEST.ROOT file, or in a TEST.properties file in any subdirectory enclosing the group of tests. In either case, add a line to the file of the form: TestNG.dirs = dir ... Directories beginning with '/' are evaluated relative to the root directory of the test suite; otherwise they are evaluated relative to the directory containing the declaring file. In particular, note that you can simply use "TestNG.dirs = ." in a TEST.properties file in the root directory of the test group's package hierarchy. No additional test descriptions are necessary, but test descriptions containing information tags, such as @bug, @summary, etc are permitted. All the Java source files in the group will be compiled if necessary, before any of the tests in the group are run. The selected tests within the group will be run, one at a time, using org.testng.TestNG. Library classes The specification for the @library tag has been extended so that any paths beginning with '/' will be evaluated relative to the root directory of the test suite. In addition, some bugs have been fixed that prevented sharing the compiled versions of library classes between tests in different directories. Note: This has uncovered some issues in tests that use a combination of @build and @library tags, such that some tests may fail unexpectedly with ClassNotFoundException. The workaround for now is to ensure that library classes are listed before the test classes in any @build tags. To specify one or more library directories for a group of TestNG tests, add a line of the following form to the TEST.properties file in the root directory of the group's package hierarchy: lib.dirs = dir ... As before, directories beginning with '/' are evaluated relative to the root directory of the test suite; otherwise they are evaluated relative to the directory containing the declaring file. The libraries will be available to all classes in the group; you cannot specify different libraries for different tests within the group. Coming soon ... From this point on, jtreg development will be using the new jtreg repository in the OpenJDK code-tools project. There is a new email alias jtreg-dev at openjdk.java.net for discussions about jtreg development. The existing alias jtreg-use at openjdk.java.net will continue to be available for questions about using jtreg. For more information ... An updated version of the jtreg Tag Language Specification is being prepared, and will be made available when it is ready. In the meantime, you can find more information about the support for TestNG by executing the following command: $ jtreg -onlinehelp TestNG For more information on TestNG itself, visit testng.org.

    Read the article

  • Incomplete upgrade 12.04 to 12.10

    - by David
    Everything was running smoothly. Everything had been downloaded from Internet, packages had been installed and a prompt asked for some obsolete programs/files to be removed or kept. After that the computer crashed and and to manually force a shutdown. I turned it on again and surprise I was on 12.10! Still the upgrade was not finished! How can I properly finish that upgrade? Here's the output I got in the command line after following posted instructions: i astrill - Astrill VPN client software i dayjournal - Simple, minimal, digital journal. i gambas2-gb-form - A gambas native form component i gambas2-gb-gtk - The Gambas gtk component i gambas2-gb-gtk-ext - The Gambas extended gtk GUI component i gambas2-gb-gui - The graphical toolkit selector component i gambas2-gb-qt - The Gambas Qt GUI component i gambas2-gb-settings - Gambas utilities class i A gambas2-runtime - The Gambas runtime i google-chrome-stable - The web browser from Google i google-talkplugin - Google Talk Plugin i indicator-keylock - Indicator for Lock Keys i indicator-ubuntuone - Indicator for Ubuntu One synchronization s i A language-pack-kde-zh-hans - KDE translation updates for language Simpl i language-pack-kde-zh-hans-base - KDE translations for language Simplified C i libapt-inst1.4 - deb package format runtime library idA libattica0.3 - a Qt library that implements the Open Coll idA libbabl-0.0-0 - Dynamic, any to any, pixel format conversi idA libboost-filesystem1.46.1 - filesystem operations (portable paths, ite idA libboost-program-options1.46.1 - program options library for C++ idA libboost-python1.46.1 - Boost.Python Library idA libboost-regex1.46.1 - regular expression library for C++ i libboost-serialization1.46.1 - serialization library for C++ idA libboost-signals1.46.1 - managed signals and slots library for C++ idA libboost-system1.46.1 - Operating system (e.g. diagnostics support idA libboost-thread1.46.1 - portable C++ multi-threading i libcamel-1.2-29 - Evolution MIME message handling library i libcmis-0.2-0 - CMIS protocol client library i libcupsdriver1 - Common UNIX Printing System(tm) - Driver l i libdconf0 - simple configuration storage system - runt i libdvdcss2 - Simple foundation for reading DVDs - runti i libebackend-1.2-1 - Utility library for evolution data servers i libecal-1.2-10 - Client library for evolution calendars i libedata-cal-1.2-13 - Backend library for evolution calendars i libedataserver-1.2-15 - Utility library for evolution data servers i libexiv2-11 - EXIF/IPTC metadata manipulation library i libgdu-gtk0 - GTK+ standard dialog library for libgdu i libgdu0 - GObject based Disk Utility Library idA libgegl-0.0-0 - Generic Graphics Library idA libglew1.5 - The OpenGL Extension Wrangler - runtime en i libglew1.6 - OpenGL Extension Wrangler - runtime enviro i libglewmx1.6 - OpenGL Extension Wrangler - runtime enviro i libgnome-bluetooth8 - GNOME Bluetooth tools - support library i libgnomekbd7 - GNOME library to manage keyboard configura idA libgsoap1 - Runtime libraries for gSOAP i libgweather-3-0 - GWeather shared library i libimobiledevice2 - Library for communicating with the iPhone i libkdcraw20 - RAW picture decoding library i libkexiv2-10 - Qt like interface for the libexiv2 library i libkipi8 - library for apps that want to use kipi-plu i libkpathsea5 - TeX Live: path search library for TeX (run i libmagickcore4 - low-level image manipulation library i libmagickwand4 - image manipulation library i libmarblewidget13 - Marble globe widget library idA libmusicbrainz4-3 - Library to access the MusicBrainz.org data i libnepomukdatamanagement4 - Basic Nepomuk data manipulation interface i libnux-2.0-0 - Visual rendering toolkit for real-time app i libnux-2.0-common - Visual rendering toolkit for real-time app i libpoppler19 - PDF rendering library i libqt3-mt - Qt GUI Library (Threaded runtime version), i librhythmbox-core5 - support library for the rhythmbox music pl i libusbmuxd1 - USB multiplexor daemon for iPhone and iPod i libutouch-evemu1 - KernelInput Event Device Emulation Library i libutouch-frame1 - Touch Frame Library i libutouch-geis1 - Gesture engine interface support i libutouch-grail1 - Gesture Recognition And Instantiation Libr idA libx264-120 - x264 video coding library i libyajl1 - Yet Another JSON Library i linux-headers-3.2.0-29 - Header files related to Linux kernel versi i linux-headers-3.2.0-29-generic - Linux kernel headers for version 3.2.0 on i linux-image-3.2.0-29-generic - Linux kernel image for version 3.2.0 on 64 i mplayerthumbs - video thumbnail generator using mplayer i myunity - Unity configurator i A openoffice.org-calc - office productivity suite -- spreadsheet i A openoffice.org-writer - office productivity suite -- word processo i python-brlapi - Python bindings for BrlAPI i python-louis - Python bindings for liblouis i rts-bpp-dkms - rts-bpp driver in DKMS format. i system76-driver - Universal driver for System76 computers. i systemconfigurator - Unified Configuration API for Linux Instal i systemimager-client - Utilities for creating an image and upgrad i systemimager-common - Utilities and libraries common to both the i systemimager-initrd-template-am - SystemImager initrd template for amd64 cli i touchpad-indicator - An indicator for the touchpad i ubuntu-tweak - Ubuntu Tweak i A unity-lens-utilities - Unity Utilities lens i A unity-scope-calculator - Calculator engine i unity-scope-cities - Cities engine i unity-scope-rottentomatoes - Unity Scope Rottentomatoes

    Read the article

  • PaaS, DBaaS and the Oracle Database Cloud Service

    - by yaldahhakim
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} As with many widely hyped areas, there is much more variation within the broad spectrum of products referred to as “Cloud” that is immediately apparent. This variation is evident in one of the key misunderstandings about the Oracle Database Cloud Service. People could be forgiven for thinking that the Database Cloud Service was a Database-as-a-Service (DBaaS), but this is actually not true. The Database Cloud Service is a Platform-as-a-Service, which presents a different user and developer interface and has a different set of qualities. A good way to think about the difference between these two varieties of Cloud offerings is that you, the customer, have to deal with things at the level of the offering, but not for anything below it. In practice, this means that you do not have to deal with hardware or system software, including installation and maintenance, for DBaaS. You also do not have much control over configuration of these options. For PaaS, you don’t have to deal with hardware, system software, or database software – and also do not have control over these levels in the stack. So you cannot modify configuration parameters for the database with the Database Cloud Service – your interface is through SQL and PL/SQL, with Application Express, included in the Database Cloud Service, or through JDBC for Java apps running in the Java Cloud Service, or through RESTful Web Services. You will notice what is not mentioned there – SQL*Net. You cannot access your Oracle Database Cloud Service by changing an entry in the TNSNames file and using SQL*Net. So the effort involved in migrating an existing Oracle Database in your data center to the Database Cloud Service may be prohibitive. The good news is that Application Express and the RESTful Web Services wizard in the Database Cloud Service allow you to develop new applications very quickly, and, of course, the provisioning of the entire Database Cloud Service takes only minutes.

    Read the article

  • Getting FEATURE_LEVEL_9_3 to work in DX11

    - by Dominic
    Currently I'm going through some tutorials and learning DX11 on a DX10 machine (though I just ordered a new DX11 compatible computer) by means of setting the D3D_FEATURE_LEVEL_ setting to 10_0 and switching the vertex and pixel shader versions in D3DX11CompileFromFile to "vs_4_0" and "ps_4_0" respectively. This works fine as I'm not using any DX11-only features yet. I'd like to make it compatible with DX9.0c, which naively I thought I could do by changing the feature level setting to 9_3 or something and taking the vertex/pixel shader versions down to 3 or 2. However, no matter what I change the vertex/pixel shader versions to, it always fails when I try to call D3DX11CompileFromFile to compile the vertex/pixel shader files when I have D3D_FEATURE_LEVEL_9_3 enabled. Maybe this is due to the the vertex/pixel shader files themselves being incompatible for the lower vertex/pixel shader versions, but I'm not expert enough to say. My shader files are listed below: Vertex shader: cbuffer MatrixBuffer { matrix worldMatrix; matrix viewMatrix; matrix projectionMatrix; }; struct VertexInputType { float4 position : POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; }; struct PixelInputType { float4 position : SV_POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; }; PixelInputType LightVertexShader(VertexInputType input) { PixelInputType output; // Change the position vector to be 4 units for proper matrix calculations. input.position.w = 1.0f; // Calculate the position of the vertex against the world, view, and projection matrices. output.position = mul(input.position, worldMatrix); output.position = mul(output.position, viewMatrix); output.position = mul(output.position, projectionMatrix); // Store the texture coordinates for the pixel shader. output.tex = input.tex; // Calculate the normal vector against the world matrix only. output.normal = mul(input.normal, (float3x3)worldMatrix); // Normalize the normal vector. output.normal = normalize(output.normal); return output; } Pixel Shader: Texture2D shaderTexture; SamplerState SampleType; cbuffer LightBuffer { float4 ambientColor; float4 diffuseColor; float3 lightDirection; float padding; }; struct PixelInputType { float4 position : SV_POSITION; float2 tex : TEXCOORD0; float3 normal : NORMAL; }; float4 LightPixelShader(PixelInputType input) : SV_TARGET { float4 textureColor; float3 lightDir; float lightIntensity; float4 color; // Sample the pixel color from the texture using the sampler at this texture coordinate location. textureColor = shaderTexture.Sample(SampleType, input.tex); // Set the default output color to the ambient light value for all pixels. color = ambientColor; // Invert the light direction for calculations. lightDir = -lightDirection; // Calculate the amount of light on this pixel. lightIntensity = saturate(dot(input.normal, lightDir)); if(lightIntensity > 0.0f) { // Determine the final diffuse color based on the diffuse color and the amount of light intensity. color += (diffuseColor * lightIntensity); } // Saturate the final light color. color = saturate(color); // Multiply the texture pixel and the final diffuse color to get the final pixel color result. color = color * textureColor; return color; }

    Read the article

  • The Best Data Integration for Exadata Comes from Oracle

    - by maria costanzo
    Oracle Data Integrator and Oracle GoldenGate offer unique and optimized data integration solutions for Oracle Exadata. For example, customers that choose to feed their data warehouse or reporting database with near real-time throughout the day, can do so without decreasing  performance or availability of source and target systems. And if you ask why real-time, the short answer is: in today’s fast-paced, always-on world, business decisions need to use more relevant, timely data to be able to act fast and seize opportunities. A longer response to "why real-time" question can be found in a related blog post. If we look at the solution architecture, as shown on the diagram below,  Oracle Data Integrator and Oracle GoldenGate are both uniquely designed to take full advantage of the power of the database and to eliminate unnecessary middle-tier components. Oracle Data Integrator (ODI) is the best bulk data loading solution for Exadata. ODI is the only ETL platform that can leverage the full power of Exadata, integrate directly on the Exadata machine without any additional hardware, and by far provides the simplest setup and fastest overall performance on an Exadata system. We regularly see customers achieving a 5-10 times boost when they move their ETL to ODI on Exadata. For  some companies the performance gain is even much higher. For example a large insurance company did a proof of concept comparing ODI vs a traditional ETL tool (one of the market leaders) on Exadata. The same process that was taking 5hrs and 11 minutes to complete using the competing ETL product took 7 minutes and 20 seconds with ODI. Oracle Data Integrator was 42 times faster than the conventional ETL when running on Exadata.This shows that Oracle's own data integration offering helps you to gain the most out of your Exadata investment with a truly optimized solution. GoldenGate is the best solution for streaming data from heterogeneous sources into Exadata in real time. Oracle GoldenGate can also be used together with Data Integrator for hybrid use cases that also demand non-invasive capture, high-speed real time replication. Oracle GoldenGate enables real-time data feeds from heterogeneous sources non-invasively, and delivers to the staging area on the target Exadata system. ODI runs directly on Exadata to use the database engine power to perform in-database transformations. Enterprise Data Quality is integrated with Oracle Data integrator and enables ODI to load trusted data into the data warehouse tables. Only Oracle can offer all these technical benefits wrapped into a single intelligence data warehouse solution that runs on Exadata. Compared to traditional ETL with add-on CDC this solution offers: §  Non-invasive data capture from heterogeneous sources and avoids any performance impact on source §  No mid-tier; set based transformations use database power §  Mini-batches throughout the day –or- bulk processing nightly which means maximum availability for the DW §  Integrated solution with Enterprise Data Quality enables leveraging trusted data in the data warehouse In addition to Starwood Hotels and Resorts, Morrison Supermarkets, United Kingdom’s fourth-largest food retailer, has seen the power of this solution for their new BI platform and shared their story with us. Morrisons needed to analyze data across a large number of manufacturing, warehousing, retail, and financial applications with the goal to achieve single view into operations for improved customer service. The retailer deployed Oracle GoldenGate and Oracle Data Integrator to bring new data into Oracle Exadata in near real-time and replicate the data into reporting structures within the data warehouse—extending visibility into operations. Using Oracle's data integration offering for Exadata, Morrisons produced financial reports in seconds, rather than minutes, and improved staff productivity and agility. You can read more about Morrison’s success story here and hear from Starwood here. From an Irem Radzik article.

    Read the article

  • Mastering snow and Java development at jDays in Gothenburg

    - by JavaCecilia
    Last weekend, I took the train from Stockholm to Gothenburg to attend and present at the new Java developer conference jDays. It was professionally arranged in the Swedish exhibition hall close to the amusement park Liseberg and we got a great deal out of the top-level presenters and hallway discussions. Understanding and Improving Your Java Process Our main purpose was to spread information on JVM and our monitoring tools for Java processes, so I held a crash course in the most important terms and concepts if you want to affect the performance of your Java process. From the beginning - the JVM specification to interpretation of heap usage graphs. For correct analysis, you also need to understand something about process memory - you need space for the Java heap (-Xms for initial size and -Xmx for max heap size), but the process memory also contain the thread stacks (to a size of -Xss), JVM internal data structures used for keeping track of Java objects on the heap, method compilation/optimization, native libraries, etc. If you get long pause times, make sure to monitor your application, see the allocation rate and frequency of pause times.My colleague Klara Ward then held a presentation on the Java Mission Control product, the profiling and diagnostics tools suite for HotSpot, coming soon. The room was packed and very appreciated, Klara demonstrated four different scenarios, e.g. how to diagnose and fix latencies due to lock contention for logging.My German colleague, OpenJDK ambassador Dalibor Topic travelled to Sweden to do the second keynote on "Make the Future Java". He let us in on the coming features and roadmaps of Java, now delivering major versions on a two-year schedule (Java 7 2011, Java 8 2013, etc). Also letting us in on where to download early versions of 8, to report problems early on. Software Development in teams Being a scout leader, I'm drilled in different team building and workshop techniques, creating strong groups - of course, I had to attend Henrik Berglund's session on building successful teams. He spoke about the importance of clear goals, autonomy and agreed processes. Thomas Sundberg ended the conference by doing live remote pair programming with Alex in Rumania and a concrete tips for people wanting to try it out (for local collaboration, remember to wash and change clothes). Memory Master Keynote The conference keynote was delivered by the Swedish memory master Mattias Ribbing, showing off by remembering the order of a deck of cards he'd seen once. He made it interactive by forcing the audience to learn a memory mastering technique of remembering ten ordered things by heart, asking us to shout out the order backwards and we made it! I desperately need this - bought the book, will get back on the subject. Continuous Delivery The most impressive presenter was Axel Fontaine on Continuous Delivery. Very well prepared slides with key images of his message and moved about the stage like a rock star. The topic is of course highly interesting, how to create an infrastructure enabling immediate feedback to developers and ability to release your product several times per day. Tomek Kaczanowski delivered a funny and useful presentation on good and bad tests, providing comic relief with poorly written tests and the useful rules of thumb how to rewrite them. To conclude, we had a great time and hope to see you at jDays next year :)

    Read the article

  • 12.04 making BCM4313 card work with aircrack-ng?

    - by Charles Forest
    I'm a real Linux Noob, just started using it (this month) and until now i had no issues. now i'm trying to set-up aircrack-ng on my laptop, but it seems like it's using the worst card possible (or almost) there is a TON of tutorial on this card (seems to be hell to set-up) i have tryed some, but i ended up uninstalling my drivers, messing with my desktops, and ended by having no more "X" to close my windows (i have no clue how i ended there) i just re-installed my linux (took me 2 hours to setup everything again), but now i'm a bit "Scared" to try tutorials randomly again. Right now it says the driver is wl, wich is not the one i want (AFAIK it's not supported) i'm not sure what kind of informations are needed, but here's what i think could be usefull. lspci -knn 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel modules: i2c-i801 01:00.0 3D controller [0302]: NVIDIA Corporation GF108 [GeForce GT 540M] [10de:0df4] (rev a1) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb WIRELESS CARD 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Wistron NeWeb Corp. Device [185f:051a] Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac REST... 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: r8169 Kernel modules: r8169 04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: xhci_hcd Also, if i'm "screwed" with my hardware, just tell me.

    Read the article

  • An Actionable Common Approach to Federal Enterprise Architecture

    - by TedMcLaughlan
    The recent “Common Approach to Federal Enterprise Architecture” (US Executive Office of the President, May 2 2012) is extremely timely and well-organized guidance for the Federal IT investment and deployment community, as useful for Federal Departments and Agencies as it is for their stakeholders and integration partners. The guidance not only helps IT Program Planners and Managers, but also informs and prepares constituents who may be the beneficiaries or otherwise impacted by the investment. The FEA Common Approach extends from and builds on the rapidly-maturing Federal Enterprise Architecture Framework (FEAF) and its associated artifacts and standards, already included to a large degree in the annual Federal Portfolio and Investment Management processes – for example the OMB’s Exhibit 300 (i.e. Business Case justification for IT investments).A very interesting element of this Approach includes the very necessary guidance for actually using an Enterprise Architecture (EA) and/or its collateral – good guidance for any organization charged with maintaining a broad portfolio of IT investments. The associated FEA Reference Models (i.e. the BRM, DRM, TRM, etc.) are very helpful frameworks for organizing, understanding, communicating and standardizing across agencies with respect to vocabularies, architecture patterns and technology standards. Determining when, how and to what level of detail to include these reference models in the typically long-running Federal IT acquisition cycles wasn’t always clear, however, particularly during the first interactions of a Program’s technical and functional leadership with the Mission owners and investment planners. This typically occurs as an agency begins the process of describing its strategy and business case for allocation of new Federal funding, reacting to things like new legislation or policy, real or anticipated mission challenges, or straightforward ROI opportunities (for example the introduction of new technologies that deliver significant cost-savings).The early artifacts (i.e. Resource Allocation Plans, Acquisition Plans, Exhibit 300’s or other Business Case materials, etc.) of the intersection between Mission owners, IT and Program Managers are far easier to understand and discuss, when the overlay of an evolved, actionable Enterprise Architecture (such as the FEA) is applied.  “Actionable” is the key word – too many Public Service entity EA’s (including the FEA) have for too long been used simply as a very highly-abstracted standards reference, duly maintained and nominally-enforced by an Enterprise or System Architect’s office. Refreshing elements of this recent FEA Common Approach include one of the first Federally-documented acknowledgements of the “Solution Architect” (the “Problem-Solving” role). This role collaborates with the Enterprise, System and Business Architecture communities primarily on completing actual “EA Roadmap” documents. These are roadmaps grounded in real cost, technical and functional details that are fully aligned with both contextual expectations (for example the new “Digital Government Strategy” and its required roadmap deliverables - and the rapidly increasing complexities of today’s more portable and transparent IT solutions.  We also expect some very critical synergies to develop in early IT investment cycles between this new breed of “Federal Enterprise Solution Architect” and the first waves of the newly-formal “Federal IT Program Manager” roles operating under more standardized “critical competency” expectations (including EA), likely already to be seriously influencing the quality annual CPIC (Capital Planning and Investment Control) processes.  Our Oracle Enterprise Strategy Team (EST) and associated Oracle Enterprise Architecture (OEA) practices are already engaged in promoting and leveraging the visibility of Enterprise Architecture as a key contributor to early IT investment validation, and we look forward in particular to seeing the real, citizen-centric benefits of this FEA Common Approach in particular surface across the entire Public Service CPIC domain - Federal, State, Local, Tribal and otherwise. Read more Enterprise Architecture blog posts for additional EA insight!

    Read the article

  • WiFi stops working after a while in Lenovo ThinkPad W520 (Ubuntu 12.04)

    - by el10780
    After several minutes(I do not know how many) there is no internet connection on my laptop via Wi-Fi.Ubuntu doesn't show any kind of message that my WiFi was disconnected neither there is a signal drop,but suddenly Firefox stops connecting to web pages.I checked my modem/router and it seems that it is working fine.I tried also to reboot the WiFi device and nothing happens.The only thing that it makes it work again is a reboot of the system and if I do not want to do a reboot then I am enforced to connect to the Internet using Ethernet cable.Does anybody know what is happening? ## Some Hardware info that might be helpful ## el10780@ThinkPad-W520:~$ sudo lshw -class network *-network description: Ethernet interface product: 82579LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 04 serial: f0:de:f1:f1:be:10 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k duplex=full firmware=0.13-3 ip=192.168.0.10 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:50 memory:f3a00000-f3a1ffff memory:f3a2b000-f3a2bfff ioport:6080(size=32) *-network description: Wireless interface product: Centrino Advanced-N + WiMAX 6250 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 5e serial: 64:80:99:63:14:74 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=41.28.5.1 build 33926 ip=192.168.0.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:52 memory:f3900000-f3901fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.3 logical name: wmx0 serial: 00:1d:e1:53:b2:e8 capabilities: ethernet physical configuration: driver=i2400m firmware=i6050-fw-usb-1.5.sbcf link=no el10780@ThinkPad-W520:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e) 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 08) 0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04) 0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) el10780@ThinkPad-W520:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: i2400m-usb:2-1.3:1.0: WiMAX Soft blocked: yes Hard blocked: no The weirdest thing is this screenshot which I took after running the **Additional Drivers** program.I mean I have a NVidia Quadro 1000M and my Intel Centrino WiFi Card and this shows that there are not proprietay drivers for my system. http://imageshack.us/photo/my-images/268/screenshotfrom201207062.png/

    Read the article

  • Oracle Solaris Crash Analysis Tool 5.3 now available

    - by user12609056
    Oracle Solaris Crash Analysis Tool 5.3 The Oracle Solaris Crash Analysis Tool Team is happy to announce the availability of release 5.3.  This release addresses bugs discovered since the release of 5.2 plus enhancements to support Oracle Solaris 11 and updates to Oracle Solaris versions 7 through 10. The packages are available on My Oracle Support - simply search for Patch 13365310 to find the downloadable packages. Release Notes General blast support The blast GUI has been removed and is no longer supported. Oracle Solaris 2.6 Support As of Oracle Solaris Crash Analysis Tool 5.3, support for Oracle Solaris 2.6 has been dropped. If you have systems running Solaris 2.6, you will need to use Oracle Solaris Crash Analysis Tool 5.2 or earlier to read its crash dumps. New Commands Sanity Command Though one can re-run the sanity checks that are run at tool start-up using the coreinfo command, many users were unaware that they were. Though these checks can still be run using that command, a new command, namely sanity, can now be used to re-run the checks at any time. Interface Changes scat_explore -r and -t option The -r option has ben added to scat_explore so that a base directory can be specified and the -t op[tion was added to enable color taggging of the output. The scat_explore sub-command now accepts new options. Usage is: scat --scat_explore [-atv] [-r base_dir] [-d dest] [unix.N] [vmcore.]N Where: -v Verbose Mode: The command will print messages highlighting what it's doing. -a Auto Mode: The command does not prompt for input from the user as it runs. -d dest Instructs scat_explore to save it's output in the directory dest instead of the present working directory. -r base_dir Instructs scat_explore to save it's under the directory base_dir instead of the present working directory. If it is not specified using the -d option, scat_explore names it's output file as "scat_explore_system_name_hostid_lbolt_value_corefile_name." -t Enable color tags. When enabled, scat_explore tags important text with colors that match the level of importance. These colors correspond to the color normally printed when running Oracle Solaris Crash Analysis Tool in interactive mode. Tag Name Definition FATAL An extremely important message which should be investigated. WARNING A warning that may or may not have anything to do with the crash. ERROR An error, usually printer with a suggested command ALERT Used to indicate something the tool discovered. INFO Purely informational message INFO2 A follow-up to an INFO tagged message REDZONE Usually used when prnting memory info showing something is in the kernel's REDZONE. N The number of the crash dump. Specifying unix.N vmcore.N is optional and not required. Example: $ scat --scat_explore -a -v -r /tmp vmcore.0 #Output directory: /tmp/scat_explore_oomph_833a2959_0x28800_vmcore.0 #Tar filename: scat_explore_oomph_833a2959_0x28800_vmcore.0.tar #Extracting crash data... #Gathering standard crash data collections... #Panic string indicates a possible hang... #Gathering Hang Related data... #Creating tar file... #Compressing tar file... #Successful extraction SCAT_EXPLORE_DATA_DIR=/tmp/scat_explore_oomph_833a2959_0x28800_vmcore.0 Sending scat_explore results The .tar.gz file that results from a scat_explore run may be sent using Oracle Secure File Transfer. The Oracle Secure File Transfer User Guide describes how to use it to send a file. The send_scat_explore script now has a -t option for specifying a to address for sending the results. This option is mandatory. Known Issues There are a couple known issues that we are addressing in release 5.4, which you should expect to see soon: Display of timestamps in threads and clock information is incorrect in some cases. There are alignment issues with some of the tables produced by the tool.

    Read the article

  • Ask the Readers: Would You Be Willing to Give Windows Up and Use a Different O.S.?

    - by Asian Angel
    When it comes to computers, Windows definitely rules the desktop in comparison to other operating systems. What we would like to know this week is if you would actually be willing to give up using Windows altogether and move to a different operating system on your computers. Note: This week’s Ask the Readers post is posing a hypothetical situation, so please refrain from starting arguments or a flame war in the comments. Good reasoned discussion is always welcome. There is no doubt that Windows is the dominant operating system in use today. Everywhere you go or look it is easy to find computers with Windows installed such as at work, home, the library, government offices, and more. For many people it is the operating system that they know and are comfortable with, which makes changing to a different operating system less appealing. Adding to the preference for Windows (or dependency based on your view) is the custom software that many businesses use on a daily basis. Throw in the high volume of people who depend on and use Microsoft Office as a standard for their business documents and it is little wonder that Windows is so dominant. So what would you use if you did decide to take a break from or permanently move away from Windows? If your choice is Linux then you have a large and wonderful variety of distributions to choose from based on what you want out of your system. Want a distribution that is easy to work with? You could choose Ubuntu, Linux Mint, or others that are engineered to be ready to go “out of the box”. Like a challenge? Perhaps Arch Linux is more your style. One of the most attractive features of all about Linux is the price…it is very hard to beat free! Maybe Mac OS X sounds like the perfect choice. It has a certain mystique and elegance associated with it and many OS X fans refuse to use anything else if given a choice. Then there is the soon to be released Chrome OS with its’ emphasis on cloud computing. This is a system that is definitely focused on being as low-maintenance and hassle-free as possible. Quick on, quick off, minimalist, and made to be portable. All of the system’s updates will occur automatically leaving you free to work and play in the cloud. But it does have its’ limitations…no installing all of those custom apps that you love using on Windows or other systems…it is literally all about the browsing window and web apps. So there you have it. If the opportunity presented itself would you, could you give Windows up and use a different operating system? Would it be easy or hard for you to do? Perhaps it would not really matter so long as you could do what you needed or wanted to do on a computer. And maybe this is the perfect time to try something new and find out…that new favorite operating system could be just an install disc away. Let us know your thoughts in the comments! How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor The Brothers Mario – Epic Gangland Style Mario Brothers Movie Trailer [Video] Score Awesome Games on the Cheap with the Humble Indie Bundle Add a Colorful Christmas Theme to Your Windows 7 Desktop This Windows Hack Changes the Blue Screen of Death to Red Edit Images Quickly in Firefox with Pixlr Grabber Zoho Writer, Sheet, and Show Now Available in Chrome Web Store

    Read the article

  • Business School graduate joins Oracle

    - by jessica.ebbelaar(at)oracle.com
    My name is Mathias, I work as an Applications Inside Sales Rep for the French market, and I’d like to give you a brief snapshot of my experience at Oracle. First things first, how did you hear about Oracle? Where have you seen the sharp and recognizable red logo? Was it in Charles de Gaulle Airport when your eyes crossed the 20-metre banner with a picture of a strange big machine in the middle? Was it through reading the Forbes 10 top IT companies worldwide ranking? Or is it because IT is your thing and you cannot but know one of the “big four”? Meeting with a Grenoble Alumnus My story is a little different. My plan was to work in sales, in the IT industry. I had heard about Oracle, but my opinion at the time was that this kind of multinational company was way out of reach for a young graduate, even with high enthusiasm and great excitement to be (finally) on the job market. So, I was really surprised when I had an interesting conversation with a top alumnus of my business school. We were at the Grenoble Ecole de Management graduation ceremony (our graduation!), and before the party got really started, I got to chat with her. She told me of the great experience she was getting by living and working in Dublin. She had already figured it all out: “you work with another 100 young people from 10 different nationalities across Europe, you can be based in Dublin, but then once you work really hard you can move to Malaga Spain or other BUs around the world, you can work with different lines of business and learn about new “techy” and business oriented products, move to the field in your home country or elsewhere, etc.” What, what, what? Moving around Europe, trained by the best sales coaches in the world, acquiring strong IT knowledge and getting on board with one of fastest-growing and most watched companies in the world? Well, I was in. The next day (OK, 3 days after, the time to recover), I sent her my CV, and 3 months later I started as a Business Development Consultant at Oracle in Dublin, representing the latest cloud based CRM across the French market. That was 15 months ago. Since then, I moved line of business twice, I’m always learning new things and working with different and senior stakeholders; I have attended hundreds of hours of sales and product training (priceless when you come from a business background); I passed the Dublin Institute of Technology Sales Certification through different trainings given onsite within Oracle; I’ve led projects based around social media and I’ve gotten involved within various sales deals going on my market. Despite all of these great things, two will remain in my spirit: the multiculturalism that I experience every day in the office, and the American style of management - more direct and open than what you can find in “regular French companies”. Sales Progression Board In May 2012, I passed what we call a ‘Sales Progression Board’ to be promoted to an Inside Sales position. I am now in charge of generating revenue through the sale of Oracle applications on my specific territory. Always keeping in my mind my personal ambition: going to the field one day. Interested to join Oracle in the same role as Mathias? Visit http://campus.oracle.com.

    Read the article

  • Planning in the Cloud - For Real

    - by jmorourke
    One of the hottest topics at Oracle OpenWorld 2012 this week is “the cloud”.  Over the past few years, Oracle has made major investments in cloud-based applications, including some acquisitions, and now has over 100 applications available through Oracle Cloud services.  At OpenWorld this week, Oracle announced seven new offerings delivered via the Oracle Cloud services platform, one of which is the Oracle Planning and Budgeting Cloud Service.  Based on Oracle Hyperion Planning, this service is the first of Oracle’s EPM applications to be to be offered in the Cloud.    This solution is targeted to organizations that are struggling with spreadsheets or legacy planning and budgeting applications, want to deploy a world class solution for financial planning and budgeting, but are constrained by IT resources and capital budgets. With the Oracle Planning and Budgeting Cloud Service, organizations can fast track their way to world-class financial planning, budgeting and forecasting – at cloud speed, with no IT infrastructure investments and with minimal IT resources. Oracle Hyperion Planning is a market-leading budgeting, planning and forecasting application that is used by over 3,300 organizations worldwide.  Prior to this announcement, Oracle Hyperion Planning was only offered on a license and maintenance basis.  It could be deployed on-premise, or hosted through Oracle On-Demand or third party hosting partners.  With this announcement, Oracle’s market-leading Hyperion Planning application will be available as a Cloud Service and through subscription-based pricing. This lowers the cost of entry and deployment for new customers and provides a scalable environment to support future growth. With this announcement, Oracle is the first major vendor to offer one of its core EPM applications as a cloud-based service.  Other major vendors have recently announced cloud-based EPM solutions, but these are only BI dashboards delivered via a cloud platform.   With this announcement Oracle is providing a market-leading, world-class financial budgeting, planning and forecasting as a cloud service, with the following advantages: ·                     Subscription-based pricing ·                     Available standalone or as an extension to Oracle Fusion Financials Cloud Service ·                     Implementation services available from Oracle and the Oracle Partner Network ·                     High scalability and performance ·                     Integrated financial reporting and MS Office interface ·                     Seamless integration with Oracle and non-Oracle transactional applications ·                     Provides customers with more options for their planning and budgeting deployment vs. strictly on-premise or cloud-only solution providers. The OpenWorld announcement of Oracle Planning and Budgeting Cloud Service is a preview announcement, with controlled availability expected in calendar year 2012.  For more information, check out the links below: Press Release Web site If you have any questions or need additional information, please feel free to contact me at [email protected].

    Read the article

  • Setup and configure a MVC4 project for Cloud Service(web role) and SQL Azure

    - by MagnusKarlsson
    I aim at keeping this blog post updated and add related posts to it. Since there are a lot of these out there I link to others that has done kind of the same before me, kind of a blog-DRY pattern that I'm aiming for. I also keep all mistakes and misconceptions for others to see. As an example; if I hit a stacktrace I will google it if I don't directly figure out the reason for it. I will then probably take the most plausible result and try it out. If it fails because I misinterpreted the error I will not delete it from the log but keep it for future reference and for others to see. That way people that finds this blog can see multiple solutions for indexed stacktraces and I can better remember how to do stuff. To avoid my errors I recommend you to read through it all before going from start to finish.The steps:Setup project in VS2012. (msdn blog)Setup Azure Services (half of mpspartners.com blog)Setup connections strings and configuration files (msdn blog + notes)Export certificates.Create Azure package from vs2012 and deploy to staging (same steps as for production).Connections string error Set up the visual studio project:http://blogs.msdn.com/b/avkashchauhan/archive/2011/11/08/developing-asp-net-mvc4-based-windows-azure-web-role.aspx Then login in to Azure to setup the services:Stop following this guide at the "publish website" part since we'll be uploading a package.http://www.mpspartners.com/2012/09/ConfiguringandDeployinganMVC4applicationasaCloudServicewithAzureSQLandStorage/ When set up (connection strings for debug and release and all), follow this guide to set up the configuration files:http://msdn.microsoft.com/en-us/library/windowsazure/hh369931.aspxTrying to package our application at this step will generate the following warning:3>MvcWebRole1(0,0): warning WAT170: The configuration setting 'Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString' is set up to use the local storage emulator for role 'MvcWebRole1' in configuration file 'ServiceConfiguration.Cloud.cscfg'. To access Windows Azure storage services, you must provide a valid Windows Azure storage connection string. Right click the web role under roles in solution manager and choose properties. Choose "Service configuration: Cloud". At "specify storage account credentials" we will copy/paste our account name and key from the Azure management platform.3.1 4. Right click Remote desktop Configuration and select certificate and export to file. We need to allow it in Portal manager.4.15 Now right click the cloud project and select package.5.1 Showing dialogue box. 5.2 Package success Now copy the path to the packaged file and go to management portal again. Click your web role and choose staging (or production). Upload. 5.3Tick the box about the single instance if that's what you want or you don't know what it means. Otherwise the following will happen (see image 4.6)5.4 Dialogue box When you have clicked the symbol for accept- button you will see the following screen with some green indicators down at the right corner. Click them if you want to see status.5.5 Information screen.5.6 "Failed to deploy application. The upload application has at least one role with only one instance. We recommend that you deploy at least two instances per role to ensure high availability in case one of the instances becomes unavailable. "To fix, go to step 5.4If you forgot to (or just didn't know you were supposed to) export your certificates. The following error will occur. Side note, the following thread suggests. To prevent: "Enable Remote Desktop for all roles" when right-clicking BIAB and choosing "Package". But in my case it was the not so present certificates. I fund the solution here.http://social.msdn.microsoft.com/Forums/en-US/dotnetstocktradersampleapplication/thread/0e94c2b5-463f-4209-86b9-fc257e0678cd5.75.8 Success! 5.9 Nice URL n' all. (More on that at another blog post).6. If you try to login and getWhen this error occurs many web sites suggest this is because you need:http://nuget.org/packages/Microsoft.AspNet.Providers.LocalDBOr : http://nuget.org/packages/Microsoft.AspNet.ProvidersBut it can also be that you don't have the correct setup for converting connectionstrings between your web.config to your debug.web.config(or release.web.config, whichever your using).Run as suggested in the "ordinary project in your solution. Go to the management portal and click update.

    Read the article

  • Need help with chronic slow wifi connections

    - by mgeorge
    I have had chronic slow wifi connections on several networks for a while now, I think since my update to 12.04 when it came out. I have tried many of the tips and tricks already available out there in the forums with no luck (wicd, etc..). I want to see if any of you experts out there might be able to help me, and thanks in advance!! I use ubuntu 12.04 on a lenovo ideapad y650, and most networks I connect to lose the connection frequently or do not give appropriate bandwidth when I am connected. Here are some results of the usual go-to system checks: cat /etc/lsb-release; uname -a: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" Linux mgeorge-lenovo 3.2.0-48-generic-pae #74-Ubuntu SMP Thu Jun 6 20:05:01 UTC 2013 i686 i686 i386 GNU/Linux lspci -nnk | grep -iA2 net: 04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237] Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211] Kernel driver in use: iwlwifi -- 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) Subsystem: Lenovo Device [17aa:3878] Kernel driver in use: tg3 lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 090c:7371 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) iwconfig: lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"Dyno" Mode:Managed Frequency:2.412 GHz Access Point: CC:5D:4E:46:0A:93 Bit Rate=150 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-40 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:948 Invalid misc:728 Missed beacon:0 eth0 no wireless extensions. rfkill list all: 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no lsmod: Module Size Used by uvcvideo 67203 0 videodev 86588 1 uvcvideo nouveau 712674 3 ttm 65344 1 nouveau drm_kms_helper 45466 1 nouveau drm 197641 5 nouveau,ttm,drm_kms_helper i2c_algo_bit 13199 1 nouveau mxm_wmi 12893 1 nouveau wmi 18744 1 mxm_wmi joydev 17393 0 arc4 12473 2 snd_hda_codec_realtek 174313 1 snd_hda_codec_hdmi 31775 1 snd_hda_intel 32719 3 snd_hda_codec 109562 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80916 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi psmouse 86520 0 snd_seq 51592 2 snd_seq_midi,snd_seq_midi_event serio_raw 13027 0 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq iwlwifi 366509 0 mac80211 436493 1 iwlwifi snd 62218 16 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,sn d_rawmidi,snd_seq,snd_timer,snd_seq_device ideapad_laptop 17890 0 sparse_keymap 13658 1 ideapad_laptop cfg80211 178877 2 iwlwifi,mac80211 ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm ir_mce_kbd_decoder 12681 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 ir_rc6_decoder 12459 0 ir_rc5_decoder 12459 0 rc_rc6_mce 12454 0 ir_nec_decoder 12459 0 video 19115 1 nouveau ene_ir 18019 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ene_ir bnep 17830 2 rfcomm 38139 0 parport_pc 32114 0 bluetooth 158479 10 bnep,rfcomm ppdev 12849 0 binfmt_misc 17292 1 mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp tg3 141414 0 nm-tool: NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: tg3 State: unavailable Default: no HW Address: 00:23:5A:CC:85:BD Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 [Dyno] -------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: yes HW Address: 00:22:FA:D0:94:CA Capabilities: Speed: 150 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) *Dyno: Infra, CC:5D:4E:46:0A:93, Freq 2412 MHz, Rate 54 Mb/s, Strength 81 WPA2 IPv4 Settings: Address: 10.0.0.43 Prefix: 24 (255.255.255.0) Gateway: 10.0.0.1 DNS: 10.0.0.1

    Read the article

  • Utility to Script SQL Server Configuration

    - by Bill Graziano
    I wrote a small utility to script some key SQL Server configuration information. I had two goals for this utility: Assist with disaster recovery preparation Identify configuration changes I’ve released the application as open source through CodePlex. You can download it from CodePlex at the Script SQL Server Configuration project page. The application is a .NET 2.0 console application that uses SMO. It writes its output to a directory that you specify.  Disaster Planning ScriptSqlConfig generates scripts for logins, jobs and linked servers.  It writes the properties and configuration from the instance to text files. The scripts are designed so they can be run against a DR server in the case of a disaster. The properties and configuration will need to be manually compared. Each job is scripted to its own file. Each linked server is scripted to its own file. The linked servers don’t include the password if you use a SQL Server account to connect to the linked server. You’ll need to store those somewhere secure. All the logins are scripted to a single file. This file includes windows logins, SQL Server logins and any server role membership.  The SQL Server logins are scripted with the correct SID and hashed passwords. This means that when you create the login it will automatically match up to the users in the database and have the correct password. This is the only script that I programmatically generate rather than using SMO. The SQL Server configuration and properties are scripted to text files. These will need to be manually reviewed in the event of a disaster. Or you could DIFF them with the configuration on the new server. Configuration Changes These scripts and files are all designed to be checked into a version control system.  The scripts themselves don’t include any date specific information. In my environments I run this every night and check in the changes. I call the application once for each server and script each server to its own directory.  The process will delete any existing files before writing new ones. This solved the problem I had where the scripts for deleted jobs and linked servers would continue to show up.  To see any changes I just need to query the version control system to show many any changes to the files. Database Scripting Utilities that script database objects are plentiful.  CodePlex has at least a dozen of them including one I wrote years ago. The code is so easy to write it’s hard not to include that functionality. This functionality wasn’t high on my list because it’s included in a database backup.  Unless you specify the /nodb option, the utility will script out many user database objects. It will script one object per file. It will script tables, stored procedures, user-defined data types, views, triggers, table types and user-defined functions. I know there are more I need to add but haven’t gotten around it yet. If there’s something you need, please log an issue and get it added. Since it scripts one object per file these really aren’t appropriate to recreate an empty database. They are really good for checking into source control every night and then seeing what changed. I know everyone tells me all their database objects are in source control but a little extra insurance never hurts. Conclusion I hope this utility will help a few of you out there. My goal is to have it script all server objects that aren’t contained in user databases. This should help with configuration changes and especially disaster recovery.

    Read the article

  • PowerShell Script To Find Where SharePoint 2007 Features Are Activated

    - by Brian T. Jackett
    Recently I posted a script to find where SharePoint 2010 Features Are Activated.  I built the original version to use SharePoint 2010 PowerShell commandlets as that saved me a number of steps for filtering and gathering features at each level.  If there was ever demand for a 2007 version I could modify the script to handle that by using the object model instead of commandlets.  Just the other week a fellow SharePoint PFE Jason Gallicchio had a customer asking about a version for SharePoint 2007.  With a little bit of work I was able to convert the script to work against SharePoint 2007.   Solution    Below is the converted script that works against a SharePoint 2007 farm.  Note: There appears to be a bug with the 2007 version that does not give accurate results against a SharePoint 2010 farm.  I ran the 2007 version against a 2010 farm and got fewer results than my 2010 version of the script.  Discussing with some fellow PFEs I think the discrepancy may be due to sandboxed features, a new concept in SharePoint 2010.  I have not had enough time to test or confirm.  For the time being only use the 2007 version script against SharePoint 2007 farms and the 2010 version against SharePoint 2010 farms.    Note: This script is not optimized for medium to large farms.  In my testing it took 1-3 minutes to recurse through my demo environment.  This script is provided as-is with no warranty.  Run this in a smaller dev / test environment first. 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 025 026 027 028 029 030 031 032 033 034 035 036 037 038 039 040 041 042 043 044 045 046 047 048 049 050 051 052 053 054 055 056 057 058 059 060 061 062 063 064 065 066 067 068 069 070 function Get-SPFeatureActivated { # see full script for help info, removed for formatting [CmdletBinding()] param(     [Parameter(position = 1, valueFromPipeline=$true)]     [string]     $Identity )#end param     Begin     {         # load SharePoint assembly to access object model         [void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")             # declare empty array to hold results. Will add custom member for Url to show where activated at on objects returned from Get-SPFeature.         $results = @()                 $params = @{}     }     Process     {         if([string]::IsNullOrEmpty($Identity) -eq $false)         {             $params = @{Identity = $Identity}         }                 # create hashtable of farm features to lookup definition ids later         $farm = [Microsoft.SharePoint.Administration.SPFarm]::Local                         # check farm features         $results += ($farm.FeatureDefinitions | Where-Object {$_.Scope -eq "Farm"} | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} |                          % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value ([string]::Empty) -PassThru} |                          Select-Object -Property Scope, DisplayName, Id, Url)                 # check web application features         $contentWebAppServices = $farm.services | ? {$_.typename -like "Windows SharePoint Services Web Application"}                 foreach($webApp in $contentWebAppServices.WebApplications)         {             $results += ($webApp.Features | Select-Object -ExpandProperty Definition | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} |                          % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value $webApp.GetResponseUri(0).AbsoluteUri -PassThru} |                          Select-Object -Property Scope, DisplayName, Id, Url)                         # check site collection features in current web app             foreach($site in ($webApp.Sites))             {                 $results += ($site.Features | Select-Object -ExpandProperty Definition | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} |                                  % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value $site.Url -PassThru} |                                  Select-Object -Property Scope, DisplayName, Id, Url)                                 # check site features in current site collection                 foreach($web in ($site.AllWebs))                 {                     $results += ($web.Features | Select-Object -ExpandProperty Definition | Where-Object {[string]::IsNullOrEmpty($Identity) -or ($_.DisplayName -eq $Identity)} |                                      % {Add-Member -InputObject $_ -MemberType noteproperty -Name Url -Value $web.Url -PassThru} |                                      Select-Object -Property Scope, DisplayName, Id, Url)                                                        $web.Dispose()                 }                 $site.Dispose()             }         }     }     End     {         $results     } } #end Get-SPFeatureActivated Get-SPFeatureActivated   Conclusion    I have posted this script to the TechNet Script Repository (click here).  As always I appreciate any feedback on scripts.  If anyone is motivated to run this 2007 version script against a SharePoint 2010 to see if they find any differences in number of features reported versus what they get with the 2010 version script I’d love to hear from you.         -Frog Out

    Read the article

  • Java EE 7 Roadmap

    - by Linda DeMichiel
    The Java EE 6 Platform, released in December 2009, has seen great uptake from the community with its POJO-based programming model, lightweight Web Profile, and extension points. There are now 13 Java EE 6 compliant appserver implementations today! When we announced the Java EE 7 JSR back in early 2011, our plans were that we would release it by Q4 2012. This target date was slightly over three years after the release of Java EE 6, but at the same time it meant that we had less than two years to complete a fairly comprehensive agenda — to continue to invest in significant enhancements in simplification, usability, and functionality in updated versions of the JSRs that are currently part of the platform; to introduce new JSRs that reflect emerging needs in the community; and to add support for use in cloud environments. We have since announced a minor adjustment in our dates (to the spring of 2013) in order to accommodate the inclusion of JSRs of importance to the community, such as Web Sockets and JSON-P. At this point, however, we have to make a choice. Despite our best intentions, our progress has been slow on the cloud side of our agenda. Partially this has been due to a lack of maturity in the space for provisioning, multi-tenancy, elasticity, and the deployment of applications in the cloud. And partially it is due to our conservative approach in trying to get things "right" in view of limited industry experience in the cloud area when we started this work. Because of this, we believe that providing solid support for standardized PaaS-based programming and multi-tenancy would delay the release of Java EE 7 until the spring of 2014 — that is, two years from now and over a year behind schedule. In our opinion, that is way too long. We have therefore proposed to the Java EE 7 Expert Group that we adjust our course of action — namely, stick to our current target release dates, and defer the remaining aspects of our agenda for PaaS enablement and multi-tenancy support to Java EE 8. Of course, we continue to believe that Java EE is well-suited for use in the cloud, although such use might not be quite ready for full standardization. Even today, without Java EE 7, Java EE vendors such as Oracle, Red Hat, IBM, and CloudBees have begun to offer the ability to run Java EE applications in the cloud. Deferring the remaining cloud-oriented aspects of our agenda has several important advantages: It allows Java EE Platform vendors to gain more experience with their implementations in this area and thus helps us avoid risks entailed by trying to standardize prematurely in an emerging area. It means that the community won't need to wait longer for those features that are ready at the cost of those features that need more time. Because we have already laid some of the infrastructure for cloud support in Java EE 7, including resource definition metadata, improved security configuration, JPA schema generation, etc., it will allow us to expedite a Java EE 8 release. We therefore plan to target the Java EE 8 Platform release for the spring of 2015. This shift in the scope of Java EE 7 allows us to better retain our focus on enhancements in simplification and usability and to deliver on schedule those features that have been most requested by developers. These include the support for HTML 5 in the form of Web Sockets and JSON-P; the simplified JMS 2.0 APIs; improved Managed Bean alignment, including transactional interceptors; the JAX-RS 2.0 client API; support for method-level validation; a much more comprehensive expression language; and more. We feel strongly that this is the right thing to do, and we hope that you will support us in this proposed direction.

    Read the article

  • Administer, manage, monitor, and fine tune the performance of your Oracle SOA Suite 11g Service Infrastructure and SOA composite applications.

    - by JuergenKress
    Key Features of the book If you are an Oracle SOA suite administrator, then this book is your bible. It gives you everything you need to know about all your tasks and help you to apply what you learn in your everyday life right from the first chapter. The book walks through promoting code across environments, performance tuning the service infrastructure, monitoring the environment, configuring security policies, managing the dehydration store, backing and restoring environments and so on. Packed with real-world examples from authors' own experiences, this books offers a unique insight into Oracle SOA Suite Administration. Detailed description The book begins with an introduction of SOA and quickly moves on to management of SOA composite applications. Readers will learn how to manage composite applications, their deployments and lifecycles. Equipped with this knowledge, readers will be introduced to monitoring and performance tuning SOA Suite, monitoring instances, messages, and composite applications, managing faults and exceptions, configuring audit levels of composite applications to include end-to-end monitoring through the use of extended logging as well as administering and configuring all SOA Suite components. A very important aspect of administration is tuning and optimizing the infrastructure for performance and book offers real work recommendations to monitor and performance tune service engines, the underlying WebLogic server, threads and timeouts, files systems, and composite applications. It also covers detailed administration of individual service components, configuring the infrastructure MBeans using both Oracle Enterprise Manager Fusion Middleware Control and WLST based scripts, migrating worklist preferences and BAM data across environments, setting up Email, LDAP and custom XPath. An administrator is always trusted with troubleshooting and root causing problems in the infrastructure and this book will help you through the troubleshooting approaches as how to identify faults and exception through extended logging and thread dumps and find solutions to common startup problems and deployment issues. The advanced contents of this book explains OWSM security framework and how to secure components deployed to the infrastructure along with the details of all groundwork needed to ready the environment. Last few chapters help you to understand and deal with managing the metadata services repository and dehydration store, backup and recovery and concluding with advanced topics such as silent/scripted installations, cloning, upgrading, patching and high availability installations. Packed with real-world examples, and tips straight from the trench; this book offers insights into SOA Suite administration that you will not find elsewhere. Part of our writing style in this book draws heavily on the philosophy of reuse and as such the book provide an ample of executable SQL queries and WLST scripts that administrators can reuse and extend to perform most of the administration tasks such as monitoring instances, processing times, instance states and perform automatic deployments, tuning, migration, and installation. These scripts are spread over each of the chapters in the book and can also be downloaded from here. The book is available in different formats at the following websites: Paperback and eBook versions & Kindle version. It is available for order and signed copies are available through our web site. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA book,SOA Suite Adminsitration,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • Green (Screen) Computing

    - by onefloridacoder
    I recently was given an assignment to create a UX where a user could use the up and down arrow keys, as well as the tab and enter keys to move through a Silverlight datagrid that is going be used as part of a high throughput data entry UI. And to be honest, I’ve not trapped key codes since I coded JavaScript a few years ago.  Although the frameworks I’m using made it easy, it wasn’t without some trial and error.    The other thing that bothered me was that the customer tossed this into the use case as they were delivering the use case.  Fine.  I’ll take a whack at anything and beat up myself and beg (I’m not beyond begging for help) the community for help to get something done if I have to. It wasn’t as bad as I thought and I thought I would hopefully save someone a few keystrokes if you wanted to build a green screen for your customer.   Here’s the ValueConverter to handle changing the strings to decimals and then back again.  The value is a nullable valuetype so there are few extra steps to take.  Usually the “ConvertBack()” method doesn’t get addressed but in this case we have two-way binding and the converter needs to ensure that if the user doesn’t enter a value it will remain null when the value is reapplied to the model object’s setter.  1: using System; 2: using System.Windows.Data; 3: using System.Globalization; 4:  5: public class NullableDecimalToStringConverter : IValueConverter 6: { 7: public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) 8: { 9: if (!(((decimal?)value).HasValue)) 10: { 11: return (decimal?)null; 12: } 13: if (!(value is decimal)) 14: { 15: throw new ArgumentException("The value must be of type decimal"); 16: } 17:  18: NumberFormatInfo nfi = culture.NumberFormat; 19: nfi.NumberDecimalDigits = 4; 20:  21: return ((decimal)value).ToString("N", nfi); 22: } 23:  24: public object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) 25: { 26: decimal nullableDecimal; 27: decimal.TryParse(value.ToString(), out nullableDecimal); 28:  29: return nullableDecimal == 0 ? null : nullableDecimal.ToString(); 30: } 31: }            The ConvertBack() method uses TryParse to create a value from the incoming string so if the parse fails, we get a null value back, which is what we would expect.  But while I was testing I realized that if the user types something like “2..4” instead of “2.4”, TryParse will fail and still return a null.  The user is getting “puuu-lenty” of eye-candy to ensure they know how many values are affected in this particular view. Here’s the XAML code.   This is the simple part, we just have a DataGrid with one column here that’s bound to the the appropriate ViewModel property with the Converter referenced as well. 1: <data:DataGridTextColumn 2: Header="On-Hand" 3: Binding="{Binding Quantity, 4: Mode=TwoWay, 5: Converter={StaticResource DecimalToStringConverter}}" 6: IsReadOnly="False" /> Nothing too magical here.  Just some XAML to hook things up.   Here’s the code behind that’s handling the DataGridKeyup event.  These are wired to a local/private method but could be converted to something the ViewModel could use, but I just need to get this working for now. 1: // Wire up happens in the constructor 2: this.PicDataGrid.KeyUp += (s, e) => this.HandleKeyUp(e);   1: // DataGrid.BeginEdit fires when DataGrid.KeyUp fires. 2: private void HandleKeyUp(KeyEventArgs args) 3: { 4: if (args.Key == Key.Down || 5: args.Key == Key.Up || 6: args.Key == Key.Tab || 7: args.Key == Key.Enter ) 8: { 9: this.PicDataGrid.BeginEdit(); 10: } 11: }   And that’s it.  The ValueConverter was the biggest problem starting out because I was using an existing converter that didn’t take nullable value types into account.   Once the converter was passing back the appropriate value (null, “#.####”) the grid cell(s) and the model objects started working as I needed them to. HTH.

    Read the article

  • Five Key Trends in Enterprise 2.0 for 2011

    - by kellsey.ruppel(at)oracle.com
    We recently sat down with Andy MacMillan, an industry veteran and vice president of product management for Enterprise 2.0 at Oracle, to get his take on the year ahead in Enterprise 2.0 (E2.0). He offered us his five predictions about the ways he believes E2.0 technologies will transform business in 2011. 1. Forward-thinking organizations will achieve an unprecedented level of organizational awareness. Enterprise 2.0 and Web 2.0 technologies have already transformed the ways customers, employees, partners, and suppliers communicate and stay informed. But this year we are anticipating that organizations will go to the next step and integrate social activities with business applications to deliver rich contextual "activity streams." Activity streams are a new way for enterprise users to get relevant information as quickly as it happens, by navigating to that information in context directly from their portal. We don't mean syndicating social activities limited to a single application. Instead, we believe back-office systems will be combined with social media tools to drive how users make informed business decisions in brand new ways. For example, an account manager might log into the company portal and automatically receive notification that colleagues are closing business around a certain product in his market segment. With a single click, he can reach out instantly to these colleagues via social media and learn from their successes to drive new business opportunities in his own area. 2. Online customer engagement will become a high priority for CMOs. A growing number of chief marketing officers (CMOs) have created a new direct report called "head of online"--a senior marketing executive responsible for all engagements with customers and prospects via the Web, mobile, and social media. This new field has been dubbed "Web experience management" or "online customer engagement" by firms and analyst organizations. It is likely to rapidly increase demand for a host of new business objectives and metrics from Web content management solutions. As companies interface with customers more and more over the Web, Web experience management solutions will help deliver more targeted interactions to ensure increased customer loyalty while meeting sales and business objectives. 3. Real composite applications will be widely adopted. We expect organizations to move from the concept of a single "uber-portal" that encompasses all the necessary features to a more modular, component-based concept for composite applications. This approach is now possible as IT and power users are empowered to assemble new, purpose-built composite applications quickly from existing components. 4. Records management will drive ECM consolidation. We continue to see a significant shift in the approach to records management. Several years ago initiatives were focused on overlaying records management across a set of electronic repositories and physical storage locations. We believe federated records management will continue, but we also expect to see records management driving conversations around single-platform content management consolidation. 5. Organizations will demand ECM at extreme scale. We have already seen a trend within IT organizations to provide a common, highly scalable infrastructure to consolidate and support content and information needs. But as data sizes grow exponentially, ECM at an extreme scale is likely to spread at unprecedented speeds this year. This makes sense as regulations and transparency requirements rise. The model in which ECM and lightweight CMS systems provide basic content services such as check-in, update, delete, and search has converged around a set of industry best practices and has even been coded into new industry standards such as content management interoperability services. As these services converge and the demand for them accelerates, organizations are beginning to rationalize investments into a single, highly scalable infrastructure. Is your organization ready for Enterprise 2.0 in 2011? Learn more.

    Read the article

< Previous Page | 616 617 618 619 620 621 622 623 624 625 626 627  | Next Page >