Search Results

Search found 36705 results on 1469 pages for 'update apt xapian index'.

Page 620/1469 | < Previous Page | 616 617 618 619 620 621 622 623 624 625 626 627  | Next Page >

• Server randomly freezes

  - by PsySkeletor

  Im facing a very strange issue, my debian squeeze freezes up always at night (Berlin, time). Here is what i get from a time and after doing this a few times, it becomes frozen and must be hard-reset. From /var/log/messages Dec 11 01:36:11 srv156 kernel: [125983.204251] CPU 1: Dec 11 01:36:11 srv156 kernel: [125983.204251] Modules linked in: xt_multiport nf_conntrack_ipv4 nf_defrag_ipv4 xt_recent xt_state nf_conntrack xt_tcpudp iptable_filter ip_tables x_tables hwmon_vid snd_hda_codec_atihdmi snd_hda_intel snd_hda_codec snd_hwdep snd_pcm radeon snd_timer ttm drm_kms_helper snd k10temp i2c_piix4 soundcore snd_page_alloc edac_core parport_pc drm i2c_algo_bit i2c_core shpchp pci_hotplug pcspkr edac_mce_amd parport wmi evdev processor button ext3 jbd mbcache raid1 md_mod sd_mod crc_t10dif ata_generic ahci ohci_hcd pata_atiixp e100 mii libata xhci floppy ehci_hcd thermal thermal_sys usbcore scsi_mod nls_base [last unloaded: i2c_dev] Dec 11 01:36:11 srv156 kernel: [125983.204251] Pid: 758, comm: flush-9:0 Tainted: G B 2.6.32-5-amd64 #1 GA-78LMT-USB3 Dec 11 01:36:11 srv156 kernel: [125983.204251] RIP: 0010:[<ffffffff810b3506>] [<ffffffff810b3506>] find_get_pages_tag+0x66/0xdd Dec 11 01:36:11 srv156 kernel: [125983.204251] RSP: 0018:ffff8804235e7b30 EFLAGS: 00000286 Dec 11 01:36:11 srv156 kernel: [125983.204251] RAX: ffffffffffffffff RBX: ffff8804235e7c00 RCX: 0000000000000000 Dec 11 01:36:11 srv156 kernel: [125983.204251] RDX: 0000000000040000 RSI: ffffea000496b2a8 RDI: ffffea000496b2a0 Dec 11 01:36:11 srv156 kernel: [125983.204251] RBP: ffffffff8101166e R08: ffff8804235e7af0 R09: 0000000000000000 Dec 11 01:36:11 srv156 kernel: [125983.204251] R10: 0000000000000000 R11: 0000000000040000 R12: ffff8804235e7c08 Dec 11 01:36:11 srv156 kernel: [125983.204251] R13: 0000000d22678a20 R14: ffff8804235e7af0 R15: 00000000091b9060 Dec 11 01:36:11 srv156 kernel: [125983.204251] FS: 0000000000000000(0000) GS:ffff880010440000(0000) knlGS:000000007ebf7b70 Dec 11 01:36:11 srv156 kernel: [125983.204522] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b Dec 11 01:36:11 srv156 kernel: [125983.204522] CR2: 00000000dec86000 CR3: 0000000001001000 CR4: 00000000000006e0 Dec 11 01:36:11 srv156 kernel: [125983.204522] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Dec 11 01:36:11 srv156 kernel: [125983.204522] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Dec 11 01:36:11 srv156 kernel: [125983.204522] Call Trace: Dec 11 01:36:11 srv156 kernel: [125983.204522] [<ffffffff810bb792>] ? pagevec_lookup_tag+0x1a/0x21 Dec 11 01:36:11 srv156 kernel: [125983.204522] [<ffffffff810ba330>] ? write_cache_pages+0x162/0x327 Dec 11 01:36:11 srv156 kernel: [125983.204522] [<ffffffff810b9d48>] ? __writepage+0x0/0x25 Dec 11 01:36:11 srv156 kernel: [125983.204522] [<ffffffff8110758a>] ? writeback_single_inode+0xe7/0x2da Dec 11 01:36:11 srv156 kernel: [125983.204522] [<ffffffff81108290>] ? writeback_inodes_wb+0x424/0x4ff Dec 11 01:36:11 srv156 kernel: [125983.204522] [<ffffffff81108497>] ? wb_writeback+0x12c/0x1ab Dec 11 01:36:11 srv156 kernel: [125983.204522] [<ffffffff8110870d>] ? wb_do_writeback+0x14f/0x165 Dec 11 01:36:11 srv156 kernel: [125983.204522] [<ffffffff81108754>] ? bdi_writeback_task+0x31/0xaa Dec 11 01:36:11 srv156 kernel: [125983.204522] [<ffffffff810c8664>] ? bdi_start_fn+0x0/0xd0 Dec 11 01:36:11 srv156 kernel: [125983.204522] [<ffffffff810c86d4>] ? bdi_start_fn+0x70/0xd0 Dec 11 01:36:11 srv156 kernel: [125983.204522] [<ffffffff810c8664>] ? bdi_start_fn+0x0/0xd0 Dec 11 01:36:11 srv156 kernel: [125983.204522] [<ffffffff81064ac1>] ? kthread+0x79/0x81 Dec 11 01:36:11 srv156 kernel: [125983.204522] [<ffffffff81011baa>] ? child_rip+0xa/0x20 Dec 11 01:36:11 srv156 kernel: [125983.204522] [<ffffffff81064a48>] ? kthread+0x0/0x81 Dec 11 01:36:11 srv156 kernel: [125983.204522] [<ffffffff81011ba0>] ? child_rip+0x0/0x20 From /var/log/syslog Dec 10 21:20:29 srv156 kernel: [110625.162930] BUG: Bad page map in process java pte:14fa4f067 pmd:424b54067 Dec 10 21:20:29 srv156 kernel: [110625.162937] page:ffffea000496c148 flags:0200000000000878 count:2 mapcount:-1 mapping:ffff88014f8d7de8 index:2f4 Dec 10 21:20:29 srv156 kernel: [110625.162946] addr:0000000009096000 vm_flags:00100077 anon_vma:ffff880422410d40 mapping:(null) index:9096 Dec 10 21:20:29 srv156 kernel: [110625.162955] Pid: 21356, comm: java Tainted: G B 2.6.32-5-amd64 #1 Dec 10 21:20:29 srv156 kernel: [110625.162961] Call Trace: Dec 10 21:20:29 srv156 kernel: [110625.162966] [<ffffffff810ca4bf>] ? print_bad_pte+0x232/0x24a Dec 10 21:20:29 srv156 kernel: [110625.162973] [<ffffffff810cb56f>] ? unmap_vmas+0x62d/0x931 Dec 10 21:20:29 srv156 kernel: [110625.162980] [<ffffffff810cfc74>] ? exit_mmap+0xc4/0x148 Dec 10 21:20:29 srv156 kernel: [110625.162986] [<ffffffff8104bbc1>] ? mmput+0x3c/0xdf Dec 10 21:20:29 srv156 kernel: [110625.162992] [<ffffffff8104f81e>] ? exit_mm+0x102/0x10d Dec 10 21:20:29 srv156 kernel: [110625.162998] [<ffffffff81051243>] ? do_exit+0x1f8/0x6c9 Dec 10 21:20:29 srv156 kernel: [110625.163004] [<ffffffff81071abb>] ? futex_wake+0xd6/0xe7 Dec 10 21:20:29 srv156 kernel: [110625.163010] [<ffffffff8105178a>] ? do_group_exit+0x76/0x9d Dec 10 21:20:29 srv156 kernel: [110625.163016] [<ffffffff8105df9f>] ? get_signal_to_deliver+0x310/0x339 Dec 10 21:20:29 srv156 kernel: [110625.163023] [<ffffffff81010037>] ? do_notify_resume+0x87/0x73f Dec 10 21:20:29 srv156 kernel: [110625.163029] [<ffffffff810cc664>] ? handle_mm_fault+0x7aa/0x80f Dec 10 21:20:29 srv156 kernel: [110625.163036] [<ffffffff81073f14>] ? compat_sys_futex+0x10d/0x12b Dec 10 21:20:29 srv156 kernel: [110625.163043] [<ffffffff812fb546>] ? do_page_fault+0x2e0/0x2fc Dec 10 21:20:29 srv156 kernel: [110625.163049] [<ffffffff81010e0e>] ? int_signal+0x12/0x17 Dec 10 21:20:29 srv156 kernel: [110625.163114] BUG: Bad page state in process java pfn:14fa0c Dec 10 21:20:29 srv156 kernel: [110625.163120] page:ffffea000496b2a0 flags:020000000002001c count:0 mapcount:-1 mapping:ffff88039dc0db30 index:11e3 Dec 10 21:20:29 srv156 kernel: [110625.164563] Pid: 21356, comm: java Tainted: G B 2.6.32-5-amd64 #1 Dec 10 21:20:29 srv156 kernel: [110625.164570] Call Trace: Dec 10 21:20:29 srv156 kernel: [110625.164578] [<ffffffff810b71a9>] ? bad_page+0x116/0x129 Dec 10 21:20:29 srv156 kernel: [110625.164586] [<ffffffff810b7692>] ? free_pages_check+0x38/0x57 Dec 10 21:20:29 srv156 kernel: [110625.164595] [<ffffffff810b89cf>] ? free_hot_cold_page+0x46/0x190 Dec 10 21:20:29 srv156 kernel: [110625.164603] [<ffffffff810b8b82>] ? __pagevec_free+0x69/0x7f Dec 10 21:20:29 srv156 kernel: [110625.164611] [<ffffffff810bba3f>] ? release_pages+0x137/0x18d Dec 10 21:20:29 srv156 kernel: [110625.164620] [<ffffffff810d8559>] ? free_pages_and_swap_cache+0x57/0x73 Dec 10 21:20:29 srv156 kernel: [110625.164629] [<ffffffff810cb5ed>] ? unmap_vmas+0x6ab/0x931 Dec 10 21:20:29 srv156 kernel: [110625.164637] [<ffffffff810cfc74>] ? exit_mmap+0xc4/0x148 Dec 10 21:20:29 srv156 kernel: [110625.164644] [<ffffffff8104bbc1>] ? mmput+0x3c/0xdf Dec 10 21:20:29 srv156 kernel: [110625.164652] [<ffffffff8104f81e>] ? exit_mm+0x102/0x10d Dec 10 21:20:29 srv156 kernel: [110625.164660] [<ffffffff81051243>] ? do_exit+0x1f8/0x6c9 Dec 10 21:20:29 srv156 kernel: [110625.164667] [<ffffffff81071abb>] ? futex_wake+0xd6/0xe7 Dec 10 21:20:29 srv156 kernel: [110625.164675] [<ffffffff8105178a>] ? do_group_exit+0x76/0x9d Dec 10 21:20:29 srv156 kernel: [110625.164683] [<ffffffff8105df9f>] ? get_signal_to_deliver+0x310/0x339 Dec 10 21:20:29 srv156 kernel: [110625.164692] [<ffffffff81010037>] ? do_notify_resume+0x87/0x73f Dec 10 21:20:29 srv156 kernel: [110625.164700] [<ffffffff810cc664>] ? handle_mm_fault+0x7aa/0x80f The last piece of log, has been recently posted, because I've just found it. It seems Java process do something and began to slowly eat all the resources of the server. I don't know exactly if this could be the root cause. Im using Debian Squeeze. uname -a Linux srv156 2.6.32-5-amd64 #1 SMP Sun Sep 23 11:00:33 UTC 2012 x86_64 GNU/Linux I really will appreciate your help, i dont know what more to do.

  Read the article

• mod_rewrite: Rewriting / to cgi script

  - by Jens Björnhager

  I have a vhost in which I would like to rewrite / to something like /cgi-bin/script?123. I thought something like this would work, but this rewrites to "/index.html/ somehow. RewriteEngine On RewriteRule ^/$ /cgi-bin/script.cgi?123 [L] How can you do this?

  Read the article

• Problems installing Ruby 1.9.2 and rvm on Debian Lenny

  - by Dave Everitt

  I have currently have Ruby 1.9.1 (bad) and want to install 1.9.3 under rvm. However, rvm requirements gives a long list: install build-essential openssl libreadline6 libreadline6-dev curl git-core zlib1g zlib1g-dev libssl-dev libyaml-dev libsqlite3-dev sqlite3 libxml2-dev libxslt-dev autoconf libc6-dev ncurses-dev automake libtool bison subversion But I've hit a problem here: /# apt-get install libreadline6 Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find package libreadline6 ...and (I imagine after just hunting down a Debian source to download curl) finding these packages isn't going to be a picnic. Given that there are few packages to install before I can get rvm to install Ruby 1.9.3, what's a good way forward? My sources.list: deb http://archive.debian.org/debian/ lenny main contrib

  Read the article

• How do I get apache RewriteRule working correctly for a subdomain

  - by yummm

  I just setup a subdomain with the following RewriteCond: RewriteCond $1 !^search.php$ RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^/?([^/]+)$ search.php?q=$1 [L,NS] I'm using the same rewrite condition on my main domain and it works perfectly. However, when I set it up on the subdomain, it simply outputs "index.php" when going to http://sub.domain.com Every page on the subdomain outputs the page name in the body instead of processing the code, except for the search page, which appears to be working correctly. What can I do to correct this issue?

  Read the article

• Unable to commit file through svn, server sent truncated HTTP response body

  - by Rocket3G

  I have my own VPS, on which I want to run a simple SVN + chiliproject setup. I have re-installed SVN, CHILI and the OS several times, and it always works for a couple of hours/days and then it just stops working. Well, everything works, except I can't upload any files. Committing directories seems to work just fine, but when I try to commit a file it breaks. I have an error log file, which gives me the following text when I try to commit something x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "OPTIONS /project HTTP/1.1" 200 149 x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "PROPFIND /project HTTP/1.1" 207 346 x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "MKACTIVITY /project/!svn/act/c11d45ac-86b6-184a-ac5a-9a1105d64563 HTTP/1.1" 401 345 x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "MKACTIVITY /project/!svn/act/c11d45ac-86b6-184a-ac5a-9a1105d64563 HTTP/1.1" 201 262 x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "PROPFIND /project HTTP/1.1" 207 236 x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "CHECKOUT /project/!svn/vcc/default HTTP/1.1" 201 271 x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "PROPPATCH /project/!svn/wbl/c11d45ac-86b6-184a-ac5a-9a1105d64563/1 HTTP/1.1" 207 267 x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "CHECKOUT /project/!svn/ver/1 HTTP/1.1" 201 271 x.x.x.x - - [19/Oct/2013:00:01:46 +0200] "HEAD /project/index.html HTTP/1.1" 404 - x.x.x.x - admin [19/Oct/2013:00:01:46 +0200] "PUT /project/!svn/wrk/c11d45ac-86b6-184a-ac5a-9a1105d64563/index.html HTTP/1.1" 201 269 x.x.x.x - admin [19/Oct/2013:00:02:04 +0200] "DELETE /project/!svn/act/c11d45ac-86b6-184a-ac5a-9a1105d64563 HTTP/1.1" 204 - So it seems that it PUTs the file (test.html) correctly, and somehow somewhere something is wrong (file permissions are alright, when I purposely stated that they are wrong, it gave me errors, which is expected, and they were about the file permissions being incorrect. The odd thing is that files won't get added, but directories are fine. I also have enough storage left on my machine. What I should note, perhaps, is that I use Ubuntu 12.04.3 with ruby 1.9.3, mysql 14.14 and I have it set up that Chiliproject handles the authentication and authorization for the project. It works, because I can commit directories and read it all correctly, though I can't upload files. Help would really be appreciated, as I don't know what on earth is going on with this 'truncated http response body'. I tried to read them with wireshark, but it basically gave me the same information. With regards, Ps. I have no clue what the delay between put and delete is, as it's a file of a mere 500 bytes, so it's uploaded in approximately a second. Pps. I copied this question from StackOverflow to this site, as I didn't know the existence of this site and another user suggested that I'd get more answers here, as it's basically a server fault.

  Read the article

• Can't install php5-apc from dotdeb source in Debian 6

  - by YNT

  I can't install php5-apc: ~# apt-get install php5-apc Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: php5-apc : Depends: php5-common (= 5.3.19-1~dotdeb.0) but 5.3.8-2 is to be installed E: Broken packages Have fresh Debian 6 and deb http://packages.dotdeb.org squeeze all deb-src http://packages.dotdeb.org squeeze all in source.list. P. S. I'm not very experienced—just trying to set up a server by the tutorial.

  Read the article

• Is there any reason to install software as root as opposed to sudo installing software as a sudoer?

  - by Tchalvak

  I'm setting up a new server running Ubuntu Server Edition, and I'm not certain what the difference would be between installing most of the basic software as root, vs installing the basic software as an admin user using sudo apt-get install . For one thing, I'm not sure whether after installing the software as root, I'll need sudo access when running the software as a user (e.g. if I install git as root). On the other hand, if I install software as a user, I could conceive of it not being available to other users that I create in the future. What's the best practice here?

  Read the article

• How to stop basic Postfix after-queue script from BCC-ing sender?

  - by mjbraun

  I'm building a content filter for Postfix (2.9.3 package installed via apt on an Ubuntu 12.04 test VM) and I'm starting with a very basic Ruby (1.9.3) template and building up functionality. Strangely, when the script is enabled, messages sent are being forwarded on as normal, but also sent back to the sender which is not normal. Disabling the script disables this behavior. Any suggestions about what I have to change to stop that from happening? Thanks for any advice! /etc/postfix/master.cf (only the lines changed from the default) smtp inet n - - - - smtpd -o content_filter=dumper:dummy ... dumper unix - n n - 10 pipe flags=RF user=mailuser argv=/home/mailuser/mailfilter/dumper.rb ${sender} ${recipient}` /home/mailuser/mailfilter/dumper.rb #!/usr/bin/env ruby require 'open3' dir="/home/mailuser/emails" logfile="maillog.log" message = $stdin.read cmd = "/usr/sbin/sendmail -G -i #{ARGV[0]} #{ARGV[1]}" stdin, stdouterr, wait_thr = Open3.popen2e(cmd) stdin.print(message) logfile = File.open("#{dir}/#{logfile}", 'a') logfile.write(stdouterr) stdin.close stdouterr.close exit(0)

  Read the article

• Adobe premiere CS5 problem with the display driver

  - by user30179

  This error is really hindering our project. I get an error, it started showing-up June 16th 2010. There are no windows updates at the on the same date as the error, other than (Windows Defender) Seems to happen when working with Image overlays. ERROR: "The NVIDIA OpenGL driver detected a problem with the display driver and is unable to continue. The application must close." We opened the side of the case in the possibility there is an over heating problem. Nvidia Driver ver 8.16.11.9175 (nVidia Quadro FX 1700) I am running: Windows 7 x64 Adobe premiere CS5 Production nVidia Quadro FX 1700 (MRGA14L) 4 Gig ram RAID 10 2 750GB drives Duo core 3.0 6MB L2 Cache This is at least three other people that have come across this error: NVidia Forum EVGA Forum NVidia Forum UPDATE: Having the case open did not help. I also installed New Nvidia drivers now I get a different error: *ERROR:*Your hardware configuration does not meet minimum specifications needed to run the application. The application must close. I ran Windows Update and installed all four updates so now I am waiting to see if the error occurs again. Anything beyond this I am out of options.

  Read the article

• FTP Server on Centos 5.8 - Transfer fails randomly

  - by Diego

  Hi have ProFTPD runningon a brand new CentOS 5.8 server with Plesk, and its behaviour is inconsistent at best. I tried to transfer a directory from my PC, and every time I get a transfer failed on a random file. It's never the same one that fails, it just fails. Sometimes it's a .gif, sometimes it's a .css, sometimes it's a JPG. Of several hundred files, a dozen is always failing for no apparent reason. The error that I get is the following: COMMAND:> [27/11/2012 11:43:52] STOR main_border.gif [27/11/2012 11:43:53] 500 Invalid command: try being more creative ERROR:> [27/11/2012 11:43:53] Syntax error: command unrecognized. The above is just an example, the "command unrecognized" occurs with LIST and other commands as well. Here's the ProFTPD configuration, just in case: ServerName "ProFTPD" #ServerType standalone ServerType inetd DefaultServer on <Global> DefaultRoot ~ psacln AllowOverwrite on </Global> DefaultTransferMode binary UseFtpUsers on TimesGMT off SetEnv TZ :/etc/localtime Port 21 Umask 022 MaxInstances 30 ScoreboardFile /var/run/proftpd/scoreboard TransferLog /usr/local/psa/var/log/xferlog #Change default group for new files and directories in vhosts dir to psacln <Directory /var/www/vhosts> GroupOwner psacln </Directory> # Enable PAM authentication AuthPAM on AuthPAMConfig proftpd IdentLookups off UseReverseDNS off AuthGroupFile /etc/group Include /etc/proftpd.include Note: file /etc/proftpd.include is blank. The above is the default configuration set by Plesk 11. I don't know much of why is that way, my knowledge of Linux System Administration is very basic and the one of ProFTPD is a complete zero. Thanks in advance for the help. Update Issue experienced with CuteFTP and FileZilla. Update Replaced ProFTPd with PureFTPd, issue persists. Sometimes I get "command unrecognized", sometimes "failed to establish data connection". I'm starting to think that it could be a network issue, but I have completely zero knowledge of networking.

  Read the article

• Exchange 2010 Hub cannot deliver to Exchange 2007 Hub - "451 5.7.3 Cannot achieve Exchange Server authentication"

  - by Graeme Donaldson

  We have an existing Exchange 2007 server in Site A (exch07). I've installed an Exchange 2010 server in Site B (exch10). Both servers have the CAS, Mailbox and Hub roles. Messages sent via SMTP on exch10 which are destined for mailboxes on exch07 are queued with the "Last Error" reported in Queue Viewer as '451 4.4.0 Primary target IP address responded with: "451 5.7.3 Cannot achieve Exchange Server authentication." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.' I've found that some people have resolved this by creating new Receive Connectors which are scoped specifically to apply to connections from the remote hub/s, but I have had no luck doing this. Specifically I created new receive connectors on both servers with the following settings: Remote IP = IP/s of remote server Authentication = "Transport Layer Security (TLS)" and "Exchange Server authentication" Permission Groups = "Exchange servers" and "Legacy Exchange Servers" This made no difference, I see the same error message. What am I missing? Update: We noticed that the Application log had this error message from MSExchangeTransportService: Microsoft Exchange could not find a certificate that contains the domain name exch07.domain.local in the personal store on the local computer. Therefore, it is unable to support the STARTTLS SMTP verb for the connector exch10 with a FQDN parameter of exch07.domain.local. If the connector's FQDN is not specified, the computer's FQDN is used. Verify the connector configuration and the installed certificates to make sure that there is a certificate with a domain name for that FQDN. If this certificate exists, run Enable-ExchangeCertificate -Services SMTP to make sure that the Microsoft Exchange Transport service has access to the certificate key. It turns out that the default self-signed certificate was no longer enabled for the SMTP service for some reason. After enabling the self-signed certificate for SMTP, we no longer get the error in the event logs, but delivery is still failing with the same error message. Update 2: I put a mailbox on exch10 and attempted to deliver a message via SMTP on exch07 and I get the same error.

  Read the article

• Red Hat server minimal install

  - by chmeee

  In a farm of virtualized Red Hat servers, there's the need to install a minimal system for security reasons. Minimal installs have serveral advantages (even no security related): Lees exposure to vulnerabilities (if you don't need it, don't install it) Better update process (less packages to update, less probability of breaking the system) Better performance (no unneeded daemons or processes) The less software you have the easier it is to harden the system Unfortunately, this is not easy because the "Minimal Installation" on Red Hat contains lots of unnecessary packages. There is an added challenge as the farm is running Oracle iAS. I've been told that iAS has dependencies with local graphical envieronment. So finally every server in the farm has gnome, X, etc. I've been searching the web and one solution seems to be making a kickstart script that will intall only the necessary packages. But I find this difficult and have several doubts about how to maintain the system dependencies afterwards. How do you install minimal Red Hat servers? Is it Ok to use kickstart or will I have dependency problems in the installation or in updates? Is there any way to avoid installing the graphical environment for iAS?

  Read the article

• Are there any advantages to using windows 7 ultimate? I can't tell the diference

  - by Jack Dawson

  I just upgraded my new desktop which came installed with Windows 7 Home Premium 64 bit with a copy of Windows 7 Ultimate 64 bit and so far I have not noticed any difference in performance. Even my Windows Experience Index number is the same 5.5 that it was before the upgrade. So what's the point, are there any performance advantages that I'm not seeing? Additional Info My system hardware specs: AMD quad core 2.6 GHZ 1 TB 4200 RPM HDD 8 GB DDR2 RAM ATI Radeon HD 4650 w/ 1GB dedicated video memory

  Read the article

• Can't connect to research.microsoft.com on home Qwest DSL connection

  - by rakingleaves

  I have a puzzling issue regarding accessing research.microsoft.com from my home Qwest DSL connection. By default, I frequently get timeouts when accessing research.microsoft.com from Firefox, Safari, or Chrome on my Mac. I also cannot access the site from Internet Explorer in a Windows VM. However, I am able to access the site through proxify.com, so I know the site is not down. Furthermore, I haven't noticed problems accessing other sites (in particular, www.microsoft.com works fine). Also, I can access research.microsoft.com when I'm connected to networks other than my home Qwest DSL connection. Together, the above make me suspect a problem with either my router (Airport Express) or, more likely, my ISP. Anyone have any thoughts on how I can narrow down the problem further? I could call my ISP and tell them the above, but my feeling is that probably won't get me very far. I can get by browsing research.microsoft.com through a proxy, but it would be nice to figure out what's going on here and fix the problem. Oh, the only relevant discussion I found via Google was here: http://forums.whirlpool.net.au/forum-replies-archive.cfm/1311734.html Update: Thanks to those who have tried to help! I found one other thing while Googling that may be vaguely relevant: http://thedaneshproject.com/posts/supportmicrosoftcom-not-working-behind-squid/ Disabling the Accept-Encoding headers in Firefox actually didn't make a difference for me. I just thought the above might spark some other ideas about how mishandling of HTTP headers somewhere might be causing this problem. Thanks again! Another update: In case anyone is still thinking about this; I've found that I can't surf research.microsoft.com using the links text-based browser, but I can reliably download individual files with wget. Maybe that helps?

  Read the article

• Authenticate VNC session with ConsolKit?

  - by lori

  I have a linux machine running Fedora 16 in a cupboard. It has no screen or keyboard. I connect to it using a combination of vnc and ssh. Recently, after an update, I have had issues with authentication on the machine. If I vnc to it, the kde desktop pops up an error dialog every few minutes saying Authorization failed. Failed to obtain authentication. If I plug in a USB drive it fails to mount, Dolphin reports an authentication issue again. I have had limited success finding the solution. AFAICT, it is an issue with ConsoleKit deeming me to be a non-local user so it prevents authentication. This is the output from ck-list-sessions: $ ck-list-sessions Session5: unix-user = '1000' realname = 'steve' seat = 'Seat6' session-type = '' active = FALSE x11-display = ':1' x11-display-device = '' display-device = '' remote-host-name = '' is-local = FALSE on-since = '2012-09-16T08:07:03.137011Z' login-session-id = '1' I have tried to update my .vnc/xstartup script to include ck-launch-session as follows: $ cat ~/.vnc/xstartup #!/bin/sh exec ck-launch-session vncconfig -iconic & unset SESSION_MANAGER unset DBUS_SESSION_BUS_ADDRESS export XKL_XMODMAP_DISABLE=1 OS=`uname -s` if [ $OS = 'Linux' ]; then case "$WINDOWMANAGER" in *gnome*) if [ -e /etc/SuSE-release ]; then PATH=$PATH:/opt/gnome/bin export PATH fi ;; esac fi if [ -x /etc/X11/xinit/xinitrc ]; then exec ck-launch-session /etc/X11/xinit/xinitrc fi if [ -f /etc/X11/xinit/xinitrc ]; then exec ck-launch-session sh /etc/X11/xinit/xinitrc fi [ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources exec ck-launch-session xsetroot -solid grey exec ck-launch-session xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" & exec ck-launch-session twm & This has not helped. How can I either authenticate myself to ConsoleKit, or trick it into believing I am a local user?

  Read the article

• Very slow disk performance on Dell PowerEdge 2950 w/ PERC 6/i running RAID 10

  - by vocoder

  I recently set up a server running Ubuntu 10.04 LTS on a Dell PowerEdge 2950 server - it has 6 500 gb 7200RPM SATA drives setup in a RAID 10 config. I am seeing extremely poor disk performance - the RAID array reports all disks are normal and using MegaCLI, it looks like the BBU is fine. hdparm -tT /dev/sda reports: Timing cached reads: 90 MB in 2.05 seconds = 43.96 MB/sec Timing buffered disk reads: 24 MB in 3.11 seconds = 7.72 MB/sec So as you can see, it takes forever to something as simple as an apt-get upgrade and even logging into the server. How do I go about troubleshooting what is causing this? I upgraded the firmware on the PERC 6i RAID controller to the latest, but didn't see any improvements.

  Read the article

• fail2ban and denyhosts constantly ban me on Ubuntu

  - by Trey Parkman

  I just got an Ubuntu instance on Linode. To secure the SSH on it, I installed fail2ban (using apt-get), but then had a problem: fail2ban kept banning my IP (for limited durations, thankfully) even though I was entering the correct password. So I removed fail2ban and installed denyhosts instead. Same problem, but more severe: It seems like every time I SSH in, my IP gets banned. I remove it from /etc/hosts.deny, restart denyhosts and log in again, and my IP gets banned again. The only explanation I can think of is that I've been SSH-ing in as root (yes, yes, I know); maybe something is set somewhere that blocks anyone who SSH-es in as root, even if they log in successfully? This seems bizarre to me. Any ideas? (Whitelisting my IP is a temporary fix. I don't want to only be able to log on from one IP.)

  Read the article

• Dynamic subdomain routing

  - by Nader

  Hi everyone, I asked this question over at stackoverflow, but got very few views: http://stackoverflow.com/questions/2284917/route-web-requests-to-different-servers-based-on-subdomain Perhaps it's more applicable to this crowd. Here it is again for convenience: I have a platform where a user can create a new website using a subdomain. There will be thousands of these, eg abc.mydomain.com, def.mydomain.com . Hopefully if we are successful hundreds of thousands. I need to be able to route these domains to a different IPs to point at a particular app server. I have this mapping in a database right now. What are the best practices and recommended technologies here? I see a couple options: Have DNS setup with a wildcard CNAME entry so that all requests go to a single IP where perhaps two machines using heartbeat (for failover) know how to look up the IP in the database and then do an http redirect to the appropriate app server. This seems clunky and slow to me. Run my own DNS server that can be programatically managed such that when a new site is created a DNS entry is added. We also move sites around to different app servers, so I would need to be able to update DNS entries in close to real time. Thoughts anyone? Thanks. Update2: I've setup external wildcard DNS pointing at an HAProxy web server whose job it is to route requests to backend servers. The mapping is stored in our internal PowerDNS server. Question now is how to get the HAProxy server (or another) to use the value of the internal DNS and not some config file or access list? – Update: Based on some suggestions below, it seems like reverse-proxy server(s) is the way to go. As I'll be rebalancing the domain-server mapping, these need to work instantly and the TTL on a DNS solution could be a problem. Any recommendations on software to use considering this domain-IP data is stored in a DB, and I'll need this to be performant?

  Read the article

• pdftotext not outputting hebrew characters

  - by Ofri Raviv

  I'm using Xpdf's pdftotext to get the text out of some hebrew pdf files on Ubuntu. On my local machine this worked fine. I then tried to do it on another machine and the hebrew characters don't show up in the text file. I verified that I have the language package (see below why I think so). Where else can I look for the problem? >> tail -2 /etc/xpdf/xpdfrc include /etc/xpdf/includes >> cat /etc/xpdf/includes # This file was automatically generated by /usr/sbin/update-xpdfrc. # Instead, add or remove files in /etc/xpdf/ then run # /usr/sbin/update-xpdfrc to regenerate this file. include /etc/xpdf/xpdfrc-latin2 include /etc/xpdf/xpdfrc-thai include /etc/xpdf/xpdfrc-greek include /etc/xpdf/xpdfrc-turkish include /etc/xpdf/xpdfrc-arabic include /etc/xpdf/xpdfrc-hebrew include /etc/xpdf/xpdfrc-cyrillic >> cat /etc/xpdf/xpdfrc-hebrew #----- begin Hebrew support package (2003-feb-16) unicodeMap ISO-8859-8 /usr/share/xpdf/hebrew/ISO-8859-8.unicodeMap unicodeMap Windows-1255 /usr/share/xpdf/hebrew/Windows-1255.unicodeMap #----- end Hebrew support package >> ls /usr/share/xpdf/hebrew/ ISO-8859-8.unicodeMap Windows-1255.unicodeMap

  Read the article

• Syslog permissions

  - by Niels Kristian

  I'm using the $InputFile facility in rsyslog to monitor various log files scattered around my ubuntu 12.04 server. E.g. nginx, unicorn, rails, postgres, cron etc. Now my problem is, that some of these log files are created with -rw-r----- right, so rsyslog doesn't have read rights. Since I install most of the programs using apt-get, and therefore didn't change anything from default. So, in other words, I would like not to modify every singe log file / daemon to have the right permissions, if I instead could give syslog read access to all of them at once. But the question is - can I do that, and is it the "right thing to do"?

  Read the article

• Sub-process /usr/bin/dpkg returned an error code (1)

  - by rohit

  Hey friends i am getting the following error when i am trying to purge shorewall root@aptosid:/etc# apt-get purge shorewall Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: shorewall* 0 upgraded, 0 newly installed, 1 to remove and 3 not upgraded. 1 not fully installed or removed. After this operation, 1,843 kB disk space will be freed. Do you want to continue [Y/n]? (Reading database ... 212702 files and directories currently installed.) Removing shorewall ... : not found/shorewall: 25: /etc/default/shorewall: :q Stopping "Shorewall firewall": not done (check /var/log/shorewall-init.log). invoke-rc.d: initscript shorewall, action "stop" failed. dpkg: error processing shorewall (--purge): subprocess installed pre-removal script returned error exit status 1 configured to not write apport reports Errors were encountered while processing: shorewall E: Sub-process /usr/bin/dpkg returned an error code (1) root@aptosid:/etc# please help me out ...........?

  Read the article

• Office 2007 constantly crashes, logged as Event ID 1000

  - by Nori

  I have a user, who despite my best efforts, is having constant Office 2007 crashes. I've tried deleting their profile and setting it up again, repairing office, uninstalling completely and then reinstalling, and swapping out memory sticks. One event log error I keep getting is the following: (note all the Office errors are event id 1000) Faulting application name: OUTLOOK.EXE, version: 12.0.6539.5000, time stamp: 0x4c12486d Faulting module name: EMSMDB32.DLL, version: 12.0.6539.5000, time stamp: 0x4c1246f8 Exception code: 0xc0000005 Fault offset: 0x0005d8e2 Faulting process id: 0xf6c Faulting application start time: 0x01cb6633f33384f3 Faulting application path: C:\Program Files (x86)\Microsoft Office\Office12\OUTLOOK.EXE Faulting module path: c:\progra~2\micros~1\office12\EMSMDB32.DLL Report Id: 0d4a2eab-d231-11df-80a0-4061868f5d10 I also get this: Faulting application name: OUTLOOK.EXE, version: 12.0.6539.5000, time stamp: 0x4c12486d Faulting module name: olmapi32.dll, version: 12.0.6538.5000, time stamp: 0x4bfc6ad9 Exception code: 0xc0000005 Fault offset: 0x002357a9 Faulting process id: 0x5e4 Faulting application start time: 0x01cb661f4546aa77 Faulting application path: C:\Program Files (x86)\Microsoft Office\Office12\OUTLOOK.EXE Faulting module path: c:\progra~2\micros~1\office12\olmapi32.dll Report Id: a4a90658-d224-11df-80a0-4061868f5d10 The Excel error is this: Faulting application name: EXCEL.EXE, version: 12.0.6535.5002, time stamp: 0x4bd2a7f1 Faulting module name: KERNELBASE.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdbdf Exception code: 0xe06d7363 Fault offset: 0x0000b727 Faulting process id: 0x14a8 Faulting application start time: 0x01cb61ab7bc0abab Faulting application path: C:\Program Files (x86)\Microsoft Office\Office12\EXCEL.EXE Faulting module path: C:\Windows\syswow64\KERNELBASE.dll Report Id: ba0c454b-cd9e-11df-80a0-4061868f5d10 Also have gotten this for PowerPoint: Faulting application name: POWERPNT.EXE, version: 12.0.6500.5000, time stamp: 0x49a68f9d Faulting module name: COMShim.dll, version: 2010.3.325.110, time stamp: 0x4c51e0b1 Exception code: 0x40000015 Fault offset: 0x0001e388 Faulting process id: 0x1480 Faulting application start time: 0x01cb5fe9a0660e81 Faulting application path: C:\Program Files (x86)\Microsoft Office\Office12\POWERPNT.EXE Faulting module path: C:\Program Files (x86)\FactSet\COMShim.dll Report Id: e03d2a21-cbdc-11df-9bc8-4061868f5d10 (Some of the above lines edited to keep you from scroll horizontally.) Lastly, I get this error several times a day, I don't think it is related but maybe it is: Failed extract of third-party root list from auto update cab at: http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cab with error: A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file. Any ideas? This is driving me nuts.

  Read the article

• Single nginx configuration for multiple sub domains

  - by Peter Smit

  I have the following directory structure for my websites: /var/www/sitename/subdomain/(public|log) e.g /var/www/stackoverflow.com/careers/public/index.html Can I make a single generic nginx configuration to do this? So that every domain is mapped to the right directory? I would not like to edit my nginx configuration for every website I add. The root domain can always be mapped to the www subdomain.

  Read the article

• Cannot open files in Visual Studio but in Delphi and Notepad

  - by Andrew J. Brehm

  About an hour ago Visual Studio 2008 decided that it cannot find files any more. This is on 64 bit Windows Vista. When I right-click on a text file (source code or otherwise) and select "open with" and "Visual Studio 2008", I get the following error (example): Windows cannot find 'C:\Users\ajbrehm\Documents\Visual Studio 2008\Projects\Hello Prism\Hello Prism\Main.pas'. Make sure you typed the name correctly, and then try again. When I right-click the same file and select "open with" and "Delphi 2010" or "Notepad" (both other options available for text files on my system), the file opens correctly. Oddly enough when the file is part of a Visual Studio project and I open the project itself with Visual Studio (this works), I can open the file from within Visual Studio. Any ideas what might be going on? This started about an hour after I made a complete backup of my Vista VM and after I installed IIS 7, SQL Express, and Sourcegear Vault. The first files I noticed couldn't be opened in Visual Studio any more where Pascal source files in checked-outed folders from Vault. And Vault also seems to be unable to see one of the sources files and claims they don't exist. I found out about Visual Studio not opening ANY files any more when I tried to recreate the file Vault refused to see. Update: I just checked. Another user, "administrator", can still open text files with Visual Studio 2008. Both users have administrator rights. Update: I just restored the hours-old backup. Same problem. Apparently whatever triggered this happened before the install of IIS 7 and SQL Express. Never noticed it before.

  Read the article

• Black Screen on Logon (windows 7 home premium)

  - by Blacknight334

  i have been having some trouble with a dell Xps 15 laptop that i recently purchased. it is under a month old, and a problem has occurred, upon logging on just after start up, the computer will just sit on a black log on screen (with the mouse still visible and active) for a few minutes. it is extremely annoying, especially when im in a rush. the laptop is under a month old. So far, i have tried to update the drivers, all windows update, and still, nothing. also, it doesnt seem to do it when i log into safe mode, or if it does, it will do it for less than 10 seconds, then load the desktop (in normal boot, it usually takes a few minutes). i have also run a number of the inbuilt diagnostics, but found no errors. i want to avoid having to do a system restore for as long as i can. does anyone know anything that can help? (the laptop is running a 500gb SSD, 2gb Nvidia 640m, 8gb ram, 3rd gen i7 quad core with 8 threads) thanks.

  Read the article

< Previous Page | 616 617 618 619 620 621 622 623 624 625 626 627  | Next Page >