Search Results

Search found 18219 results on 729 pages for 'tips box'.

Page 621/729 | < Previous Page | 617 618 619 620 621 622 623 624 625 626 627 628  | Next Page >

• Suggestions for transitioning to new GW/private network

  - by Quinten

  I am replacing a private T1 link with a new firewall device with an ipsec tunnel for a branch office. I am trying to figure out the right way to transition folks at the new site over to the new connection, so that they default to using the much faster tunnel. Existing network: 192.168.254.0/24, gw 192.168.254.253 (Cisco router plugged in to private t1) Test network I have been using with ipsec tunnel: 192.168.1.0/24, gw 192.168.1.1 (pfsense fw plugged in to public internet), also plugged in to same switch as the old network. There are probably ~20-30 network devices in the existing subnet, about 5 with static IPs. The remote endpoint is already the firewall--I can't set up redundant links to the existing subnet. In other words, as soon as I change the tunnel configuration to point to 192.168.254.0/24, all devices in the existing subnet will stop working because they point to the wrong gateway. I'd like some ability to do this slowly--such that I can move over a few clients and verify the stability of the new link before moving critical services or less tolerant users over. What's the right way to do this? Change the netmask on all of the devices to /16, and update gateway to point to the new device? Could this cause any problems? Also, how should I handle DNS? The pfsense box is not aware of my Active Directory environment. But if I change DNS to use the local servers, it will result in a huge slowdown as DNS queries will still be routed over the private t1. I need some help coming up with a plan that's not too disruptive but will really let me thoroughly test the stability of the IPSEC tunnel before I make the final switch. The AD version is 2008R2, as are the servers. Workstations are mostly Windows XP SP3. I have not configured the 192.168.1.0/24 as a site in AD sites and services.

  Read the article

• Outlook 2010 search not working after upgrade to windows 8

  - by Klaaz

  After upgrading my computer to Windows 8 Outlook 2010 has stopped displaying search results. Normally you can enter a (part) of a word in the search box on top of the inbox list and it will show you result immediatly. Even mails allready visible on the screen are not found. Somebody familiar with this issue? Update: maybe relevant: I use an Google Apps Pro account. All mail is synced and locally available in Outlook 2010. I did not change this in any way while upgrading, it was working perfectly before. I can scroll through all the e-mails, new mails are coming in as expected. This morning I received two mails from a person by the name of Rosanne. When searching on her name in Outlook it gives me One (1) result, the last mail from today. Update 2: Rebuilding the index seemed to be working. But after another day it stopped working again. No results whatsoever in Outlook search. Rebuilding indexes every day is not an option as it takes several hours. I suspect it has something to do with the fact that I use Google Apps Pro. It acts like a Exchange server to outlook. In indexing options (configuration) I added the directories containg the PST from this service (mail is also synced locally)

  Read the article

• Exchange 2007 issue internet receive connector

  - by user223779

  I have issue with yahoo.co.uk if I send a mail from within the yahoo webconsole the mail arrives in my inbox on the exchange server If I send mail from Iphone configure to send via mail box configure with yahoo setting mail is dropped. It is not the phone I can send perfectly fine to other exchange 2007 servers same service pack etc. if you look at the smtprec log below. this message sent from the phone you can see stops after 354 Start mail input; end with . ,<,EHLO nm26-vm7.bullet.mail.ir2.yahoo.com, ,,250-mail.marcocm.com Hello [212.82.97.49], ,,250-SIZE 10485760, ,,250-PIPELINING, ,,250-DSN, ,,250-ENHANCEDSTATUSCODES, ,,250-AUTH, ,,250-8BITMIME, ,,250-BINARYMIME, ,,250 CHUNKING, ,<,MAIL FROM:, ,*,08D13F3CADECA060;2014-06-04T11:26:50.898Z;1,receiving message ,,250 2.1.0 Sender OK, ,<,RCPT TO:, ,,250 2.1.5 Recipient OK, ,<,DATA, ,,354 Start mail input; end with ., ,+,, This is the message hitting the same server sent from yahoo webmail. ,"220 mail.marcocm.com Microsoft ESMTP MAIL Service ready at Wed, 4 Jun 2014 12:29:26 +0100", ,<,EHLO nm4-vm6.bullet.mail.ir2.yahoo.com, ,,250-mail.xxx.com Hello [212.82.96.104], ,,250-SIZE 10485760, ,,250-PIPELINING, ,,250-DSN, ,,250-ENHANCEDSTATUSCODES, ,,250-AUTH, ,,250-8BITMIME, ,,250-BINARYMIME, ,,250 CHUNKING, ,<,MAIL FROM:, ,*,08D13F3CADECA06B;2014-06-04T11:29:26.237Z;1,receiving message ,,250 2.1.0 Sender OK, ,<,RCPT TO:, ,,250 2.1.5 Recipient OK, ,<,DATA, ,,354 Start mail input; end with ., 2,,250 2.6.0 <[email protected] Queued mail for delivery, <,QUIT, ,,221 2.0.0 Service closing transmission channel, ,-,,Local ,+,, Any Thoughts how to fix this issue much appreciated.

  Read the article

• Upstart multiple instances of service not working.

  - by Dax

  I started playing with MongoDB on Lucid. Now I would like to run a DB and Config server on the same box. They both use the same binary to launch, but with different config files and running on different ports. All directories for log and lib is split so one goes to mongodb and the other to mongoconf. Each process can be started without any problems on their own. start mongodb stop mongodb start mongoconf stop mongoconf But if I try to start both, the second one would just start and exit. Using 'initctl log-priority debug' I got the following in the logs. Jan 6 12:44:12 mongo4 init: event_finished: Finished started event Jan 6 12:44:12 mongo4 init: job_process_handler: Ignored event 1 (1) for process 5690 Jan 6 12:44:12 mongo4 init: mongoconf (mongoconf) main process (5690) terminated with status 1 Jan 6 12:44:12 mongo4 init: mongoconf (mongoconf) goal changed from start to stop Jan 6 12:44:12 mongo4 init: mongoconf (mongoconf) state changed from running to stopping man 5 init shows that you can use instance names to differentiate the two. I tried using 'instance mongoconf' in the on upstart script and 'instance mongodb' in the other one, and it still fails. I can manually start the other process, so there is definitely no conflicts on port numbers or directories. Any ideas on what to try or how to get output on why it is 'terminated with status 1'? Thanx

  Read the article

• Compiz & Linux compositing: how does it fit into the X architecture?

  - by Latanius

  Not a really "how to solve stuff" question, but... I was wondering how the modern X architecture works, with compiz & all. What I know about it: in the beginning, there was the X server, clients connected (presumably on TCP), and then sent messages to the server to instruct it to show windows etc. because this didn't work (at all? or just fast enough?) for OpenGL & 3D acceleration, additional APIs were created for direct rendering (DRI? and, in addition to the X server, what things did the X clients talk to to render stuff and through what interfaces?) and, finally, enter Compiz: X clients end up (somehow) rendering to OpenGL textures, which is then put together to form a fancy-looking screen with translucent windows, and rendered to the screen. What I'm especially interested in is what components does the system have and how do they connect to each other? Like... if there is a box labelled "compiz" in the system... is it inside the X server? If it's not, how do the rendered images from the apps end up in it? And where does it render to? Is that another X server? Or DRI? Of course, I'd be equally happy if pointed to some docs capable of clearing up the confusion described above (conditional on they being significantly shorter than book-sized entities).

  Read the article

• fglrx-legacy-driver not seeing Radeon HD 4650 AGP

  - by Rocket Hazmat

  I am running Debian Squeeze on an old Dell Dimension 8300 box. It has an AGP Radeon HD 4650 card. I use this machine to mine bitcoins, and today I noticed that the machine had rebooted! My precious uptime! Anyway, my miner wouldn't start, so I figured might as well update my graphics driver, maybe that would fix the issue. I went to amd.com and downloaded the newest driver (12.6 legacy), but after installing it, aticonfig gave an error: aticonfig: No supported adapters detected I uninstalled the driver and figured I'd try to install it from apt. AMD has dropped support for the HD 4000 series in fglrx, forcing me to use fglrx-legacy-driver (currently only in experimental). In order to install this, I had to update libc6 (and some other important packages, like gcc), I had to use their wheezy versions. I finally got glrx-legacy-driver installed, but I still got: aticonfig: No supported adapters detected Why isn't the driver finding my video card? I have a hunch it has something to do with the fact that it's an AGP video card. Here is the output of lspci -v (why does it say Kernel driver in use: fglrx_pci?): 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 Pro AGP [Radeon HD 4600 Series] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices [AMD] nee ATI Device 0028 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at e0000000 (32-bit, prefetchable) [size=256M] I/O ports at de00 [size=256] Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fea00000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] AGP version 3.0 Kernel driver in use: fglrx_pci

  Read the article

• Setting up a virtual ftp directory that points to another computer

  - by AngryHacker

  I have II5 sitting on an old Windows 2000 Professional box. It has an FTP site there that allows me to access files. It works great, no problem at all. However, now I need to setup a virtual directory that points to a share on another computer on the network (running Windows XP Tablet Edition). The share requires a user name and password. The network is a simple workgroup (i don't have any domains or any of that). What is the correct procedure for that? I've tried setting a share via UNC and typing in the UserID/Password when asked. But when I finished, the virtual machine showed up as an error in the IIS Manager and couldn't access it. I mapped the share onto a drive and then tried to setup a virtual directory with this drive. Same result. Is there something simple I am missing? Would upgrading any part of the picture help at all?

  Read the article

• how to export VARs from a subshell to a parent shell?

  - by webwesen

  I have a Korn shell script #!/bin/ksh # set the right ENV case $INPUT in abc) export BIN=${ABC_BIN} ;; def) export BIN=${DEF_BIN} ;; *) export BIN=${BASE_BIN} ;; esac # exit 0 <- bad idea for sourcing the file now these VARs are export'ed only in a subshell, but I want them to be set in my parent shell as well, so when I am at the prompt those vars are still set correctly. I know about . .myscript.sh but is there a way to do it without 'sourcing'? as my users often forget to 'source'. EDIT1: removing the "exit 0" part - this was just me typing without thinking first EDIT2: to add more detail on why do i need this: my developers write code for (for simplicity sake) 2 apps : ABC & DEF. every app is run in production by separate users usrabc and usrdef, hence have setup their $BIN, $CFG, $ORA_HOME, whatever - specific to their apps. so ABC's $BIN = /opt/abc/bin # $ABC_BIN in the above script DEF's $BIN = /opt/def/bin # $DEF_BIN etc. now, on the dev box developers can develop both ABC and DEF at the same time under their own user account 'justin_case', and I make them source the file (above) so that they can switch their ENV var settings back and forth. ($BIN should point to $ABC_BIN at one time and then I need to switch to $BIN=$DEF_BIN) now, the script should also create new sandboxes for parallel development of the same app, etc. this makes me to do it interactively, asking for sandbox name, etc. /home/justin_case/sandbox_abc_beta2 /home/justin_case/sandbox_abc_r1 /home/justin_case/sandbox_def_r1 the other option i have considered is writing aliases and add them to every users' profile alias 'setup_env=. .myscript.sh' and run it with setup_env parameter1 ... parameterX this makes more sense to me now

  Read the article

• Does Xenapp require Windows Terminal Services (Remote Desktop) licenses?

  - by John Virgolino

  We have a Xenapp 5.x server running for over a year now. It does not have any purchased Terminal Services (Remote Desktop) licenses installed. It is running on a Windows 2008 Server box. I am aware that Terminal Services runs fine for about 3 months and then supposedly stops issuing licenses. On occasion, Xenapp stops working and we see lots of License errors in the event log, although not necessarily every time. In most cases, a reboot or 2 resolves the problem. We figured it was because of the lack of TS licenses. I spoke with Citrix and they said we had to have the licenses, but it begs the question that if we have to have the licenses, how does it work the majority of the time without them!!?? I have not received a straight answer yet and before I tell my client to shell out more money, I need to understand the technical reasoning for how this is actually working if we are breaking the rules here. We will buy the licenses if necessary, but there has to be an explanation for this. I am hoping the community can help where Citrix apparently cannot. Thanks much!

  Read the article

• How to create a WHM/cPanel account, without creating a new sub-domain?

  - by Cyclops

  I have a basic VPS (full root access), with WHM/cPanel, and am learning the ropes. I'm trying to create a new account for an existing domain (mysite.com), and so far WHM won't let me - it either wants a sub-domain or fake domain, but won't allow two accounts for one domain. In the beginning, there was only the root account, and it wouldn't let me login to cPanel - a quick chat with tech support, and I am informed that I need to create a second account, which I did. So now I have an account, call it ns1me, for domain mysite.com. Now I want to create a django account. I go through the same process, but WHM won't allow me to use mysite.com as the domain for django. The docs recommend a sub-domain, so I fill the box in with django.mysite.com. I then realize that has actually created a sub-domain - going to django.mysite.com shows me its home directory, along with helpful information about what version of Apache, Python, and other mods its running (thanks, Apache). I really don't want a sub-domain, so that's out. Another chat with tech support, and they recommend a fake domain name, as it won't create anything. Sure enough, using a domain of djangomysite.com works, and WHM allows me to create a django account. But of course, I can't send email to [email protected] (where I could to [email protected]). What I want, is to be able to create a second account, associated with mysite.com (so I can run cPanel logged in as django, send email to [email protected], etc) - without creating a whole new sub-domain, or fake domain.

  Read the article

• Could I have destroyed Partitioning-Scheme/Filesystem of HDDs with External Harddrive Case with builtin Raid-Controller?

  - by th3m3s

  I had just recently bought a Fantec QB-35US3R to have a nice box on my desk to make some backups to. Along with the HDD-Bay I had ordered some 4TB HDDs to let them run in Raid 5, which is handled by the hardware RAID controller of the Fantec HDD-Bay. The QB-35US3R arrived a few days before the hard drives, so I got impatient and had the idea to put three old 1TB disks in the Fantec device, just to test it... Long story short: I made a backup of the most important data on these three disks before they broke. I had set the configuration scheme to RAID 3 at the Fantec device. It seems, that the Fantec RAID controller has "somehow" destroyed the partitioning scheme or the file system, because when put into a HDD docking station, they get recognized by the OS (Ubuntu/Linux) but are not mountable anymore. I tried to recover the data from one HDD via gParted (parted), which ran some hours without success. Here I stopped, before trying other tools, cos I read that the longer a hard drive is running after a the partitioning got destroyed, the worse it gets. What could the HDD-Bay probably have done to my lovely hard drive disks? Is there some routine a RAID controller is executing, when it wants to create a RAID system? Like erasing the partition table (seems not plausible to me.) or writing some information to every hard drive in the RAID (seems more likely to me.)? Is there a chance to recover the data from these HDDs, or is the change a RAID controller makes so significant, that no software is of help?

  Read the article

• Users Password does not reset after successful login at the console but works fine with SSH

  - by jnbbender

  The title says it all. I have my unsuccessful login attempts set to three. I purposefully fail logging in 2x, then when I SSH into the box successfully the 3rd time my count drops back to zero; exactly what should happen. But at the console I get failed login attempts EVEN for my successful login attempts. I am using RHEL 5.6 and no I am not able to upgrade. Here is my system-auth file: auth required pam_env.so auth required pam_tally.so onerr=fail deny=3 per_user auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth required pam_deny.so account required pam_unix.so account required pam_tally.so account sufficient pam_succeed_if.so uid < 500 quiet account required pam_permit.so password requisite pam_cracklib.so try_first_pass retry=3 password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok password required pam_deny.so session optional pam_keyinit.co revoke session required pam_limits.so session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so I have tried adding reset after and in place of per_user in the auth required pam_tally.so field. Nothing seems to work and I don't know why SSH is working just fine. Any ideas?

  Read the article

• Two folders with identical names causing many problems.

  - by R. A. Chaucer

  In my 'Documents' folder (Win7) I have two folders with names that appear in Explorer to be identical, though their contents are different. I can rename them both to something else (eg: 'Test') and Explorer doesn't complain. The dir listing that cmd.exe and powershell gives me only lists one of them, but also lists this suspicious entry: 20/04/2010 12:16 PM <DIR> ???? Even if I rename the folders to have unique names, one of them still shows up as ???? in cmd.exe. Desktop.ini in my Documents folder doesn't contain anything out of the ordinary. Both folders appear to be read-only in their properties panel, and if I untick the read-only box it will ask me if I want to apply the action recursively, but either way when I close the panel and open it again the folder is once again read-only. They are both set to not inherit permissions. The folder that shows up correctly in the cmd.exe dir listing is the "real" one, the other seems to be automatically created when a program tries to access it. How is this possible?This is driving me nuts!

  Read the article

• Debian - Problems Unmounting External Hard Drives

  - by user331981

  I recently installed Debian Testing on a new laptop and I just noticed that I am having some issues with unmounting external hard drives. I am using Mate Desktop 1.8.1. With the 1st drive, if I right click on the drive and select “safely remove”: The drive unmounts, spins down, immediately spins back up an remounts. Unable to unmount. With the 2nd drive, if I right click on the drive and select “safely remove”: The drive unmounts but does not spin down. With the 3rd drive, if I right click on the drive and select “safely remove”: The drive unmounts but does not spin down, immediately spins back up but does not remount, and after 20 seconds, it spins down and stays that way. Behavior is the same on both USB 2.0 and USB 3.0 ports. On my last laptop, on which I also used Debian Testing + Mate desktop, the safe removal of drives worked out of the box and I never had an issue with it. The drives would unmount, spin down and stay that way. To remount the drive, one needed to unplug the device and plug it back in. I am unsure how to troubleshoot this issue and I am not sure if it is merely a matter of installing a “missing” package of editing a config file. Thank you in advance.

  Read the article

• Exchange 2003 inbound routing issue

  - by user565712

  Just recently we started experiencing inbound routing issues. Email adddressed to [email protected] is intermittantly translated to [email protected]. This is happening for several users and, as stated, is intermittant. I don't know where to start looking for the solution. Is this an Exchange issue? A DNS issue? We have a single Exchange server inside our network with an FQDN of server.domain.local with a single SMTP Virtual Server. The Advanced properties of the Delivery tab of the Virt Server has an empty Masquerade Domain textbox and the value for the FDQN text-box is set to the domain itself, domain.com. The DNS record for domain.com is a CNAME entry referencing www.domain.com. Is this somehow related to the problem? I checked the headers of the inbound messages that generated NDRs as a result of being sent to [email protected] and nowhere in the header is www.domain.com mentioned. To make my life even more difficult, we use Postini as a third-party SPAM filtering service. Our MX records point to the Postini servers and Postini delivers the messages to our server. Perhaps it is Postini that is mucking things up? sigh I'm having trouble with this one and the intermittent aspect is making it that much more difficult for me. Any ideas?

  Read the article

• cheap gigabit switch for small business

  - by neoice

  my friend's business is currently borrowing my Adtran 1224R and is very happy with it. it's configured with a few VLANs to segment customers, internal traffic and public wifi. port 1 is a "trunk" port to the router, a chunky Linux box with iptables+NAT. they push a lot of traffic over the LAN (data backups) and really need gigabit. besides, I'd like my Adtran back :P my goal is to find a cheap(ish) switch that can function as a drop-in replacement. it looks like VLAN trunking is actually part of the 802.1q spec, so anything with VLAN support should cover the current trunk-to-router setup. it's nice to have both a web interface and SSH, but I can configure it either way if needed. things like the Netgear GS724T have caught my eye, but it seems like none of the hardware in the $300-500 range have really solid reviews. I'm concerned that "cheaper" hardware might not work for a network full of power users. does anyone have a recommendation for the Netgear GS724T or a switch that will meet my needs?

  Read the article

• Does cloud computing offer this? [closed]

  - by TheBlackBenzKid

  I have some newb questions I want answering please about cloud hosting - we are currently looking at Rackspace and getting a windows box. This is the situation: We have 15 computers in our office. We have 3 printers, some wifi and some network plugged. We have a standard router and the office share things via dropbox. The computers are not on Windows SBS or something similar. We want a cloud hosting solution that will offer User can login on any machine in the office and see the machine software User can login on any machine in the office and open Outlook and their emails and signature will be on exchange automatically A shared company folder on the network All printers automatically installed on the network Users can login remotely to access emails via the web At the moment we have a network company saying we need Xeon server in house with backup and psu and Windows SBS with license for each machine and also we need cabinets and cabling setup and also load balancers and modification of our DNS for emails. My question is this. Can cloud offer this? Can we have a server in the cloud that does this? Is it possible I mean the computers would be wireless connected to this cloud and you turn the machine on and its hosted?

  Read the article

• How can one restrict network activity to only the VPN on a Mac and prevent unsecured internet activity?

  - by John

  I'm using Mac OS and connect to a VPN to hide my location and IP (I have the 'send all traffic over VPN connection' box checked in teh Network system pref), I wish to remain anonymous and do not wish to reveal my actual IP, hence the VPN. I have a prefpan called pearportVPN that automatically connects me to my VPN when I get online. The problem is, when I connect to the internet using Airport (or other means) I have a few seconds of unsecured internet connection before my Mac logs onto my VPN. Therefore its only a matter of time before I inadvertently expose my real IP address in the few seconds it takes between when I connect to the internet and when I log onto my VPN. Is there any way I can block any traffic to and from my Mac that does not go through my VPN, so that nothing can connect unless I'm logged onto my VPN? I suspect I would need to find a third party app that would block all traffic except through the Server Address, perhaps Intego Virus Barrier X6 or little snitch, but I'm afraid I'm not sure which is right or how to configure them. Any help would be much appreciated. Thanks!

  Read the article

• where are the default ulimit values set? (linux, centos)

  - by nomercysir

  I have two CentOS (5) servers with nearly identical specs. When I login and do: ulimit -u on one machine, I get unlimited and on the other, 77824 When I run a cron like * * * * * ulimit -u > ulimit.txt I get the same results (unlimited, 77824). I am trying to determine where these are set so that I can alter them. They are not set in any of my profiles (.bashrc, /etc/profile, etc .. these wouldn't affect cron anyway) nor in /etc/security/limits.conf (which is empty). I have scoured google and even gone so far as to do grep -Ir 77824 / but nothing has turned up so far. I don't understand how these machines could have come preset with different limits. I am actually wondering not for these machines, but for a different (CentOS 6) machine which has a limit of 1024, which is far too small. I need to run cron jobs with a higher limit and the only way I know how to set that is in the cron job itself. That's ok, but I'd rather set it system wide so it's not as hacky. Thanks for any help. This seems like it should be easy (NOT) EDIT -- SOLVED Ok, I figured this out. It seems to be an issue either with CentOS 6 or perhaps my machine configuration. On the CentOS 5 configuration, I can set in /etc/security/limits.conf: * - nproc unlimited and that would effectively update the accounts and cron limits. However, this does not work in my CentOS 6 box. Instead, I must do: myname1 - nproc unlimited myname2 - nproc unlimited ... And things work as expected. Maybe the UID specification works to, but the wildcard (*) definitely DOES NOT here. Oddly, wildcards DO work for the 'nofile' limit. I still would love to know where the default values are actually coming from, because by default, this file is empty and I couldn't see why I had different defaults for the two CentOS boxes, which had identical hardware and were from the same provider.

  Read the article

• Adding user groups from a remote domain server to permissions of a remote desktop terminal server fails. why?

  - by doveyg

  I have 3 computers, two of which are servers running Windows Server 2008 and another running Windows 7. One of the servers has the following roles installed; Active Directory, DHCP and DNS. The other server has a Terminal Server role installed. I am trying to log-on to the Terminal Server via Remote Desktop using the Windows 7 machine with credentials from the Active Directory server. Sounds simple enough, right? Well, no. Whenever I try to add users or groups from the Active Directory Domain server to the Terminal Server's permissions for RDP it seems to ignore, or forget, them. Though the various methods I was able to find it either adds a strange sting of numbers after the user group or the logo to the left has a question mark on it, reopening the dialogue box replaces the user group with the name of the Domain. I am confident I have the Domain setup correctly as I am able to log-on to users in the Active Directory from other computers I have put in the Domain, and when I attempt to browse the user objects from the Domain I am prompted with a username/password field and am able to view the structure of Active Directory objects. Please advise.

  Read the article

• Nginx vhost configuration

  - by user101494

  I am attempting to setup a new server with Nginx 1.0.10 on debian 6. The config below works perfectly on a server with nginx 0.8.36 on Ubuntu 10.04.3 but not on the new box. The desired result is to: Redirect non-www request on the tld to www, but not not subdomains Use the the folder structure /var/www/[domain]/htdocs /var/www/[domain]/subdomains/[subdomain]/htdocs Serve files any host for which files exist in this structure On the new server domains are matching correctly but subdomains are matching to /var/www/[subdomain].[domain]/htdocs not /var/www/[domain]/subdomains/[subdomain]/htdocs server { listen 80; server_name _________ ~^[^.]+\.[^.]+$; rewrite ^(.*)$ $scheme://www.$host$1 permanent; } server { listen 80; server_name _ ~^www\.(?<domain>.+)$; server_name_in_redirect off; location / { root /var/www/$domain/htdocs; index index.html index.htm index.php; fastcgi_index index.php; } location ~ \.php$ { include /etc/nginx/fastcgi_params; keepalive_timeout 0; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } location ~ /\.ht { deny all; } } server { listen 80; server_name __ ~^(?<subdomain>\.)?(?<domain>.+)$$; server_name_in_redirect off; location / { root /var/www/$domain/subdomains/$subdomain/htdocs; index index.html index.htm index.php; fastcgi_index index.php; } location ~ \.php$ { include /etc/nginx/fastcgi_params; keepalive_timeout 0; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } location ~ /\.ht { deny all; } }

  Read the article

• Questions for anyone who has used Sun Type 7 keyboards

  - by Irinotecan

  So I noticed that Oracle is still selling Sun Type 7 keyboard and mouse packages. I was thinking of buying one for a Linux box at my house so I had easy access to some of the extra keys such as Compose and Alt-GR. I have some questions though before I do for anyone who has used these -- it's been a very long time since I've used an actual Sun keyboard. They show that both a PC and UNIX layout is available. Unfortunately, I cannot find anywhere a clear picture of both layouts to determine the difference. Can anyone post pictures of the 2 different layouts for me to take a look at? I don't remember what some of the "Solaris shortcut" keys do, like Props, Front, Stop, and Again. Are these vestiges from OpenWindows? Do they have any usage on a modern Solaris like OpenSolaris running Gnome? Do they automatically map to anything useful on Linux, or am I going to have to map them myself to something with XModMap? When I last used a Sun keyboard, I remember it having a rather mushy feel to it, so I am wondering if any touch typists could weigh in on whether this keyboard "feels nice" for day to day touch typing. Thanks!

  Read the article

• Question marks showing in ls of directory. IO errors too.

  - by jaymoo

  Has anyone seen this before? I've got a raid 5 mounted on my server and for whatever reason it started showing this: jason@box2:/mnt/raid1/cra$ ls -alh ls: cannot access e6eacc985fea729b2d5bc74078632738: Input/output error ls: cannot access 257ad35ee0b12a714530c30dccf9210f: Input/output error total 0 drwxr-xr-x 5 root root 123 2009-08-19 16:33 . drwxr-xr-x 3 root root 16 2009-08-14 17:15 .. ?????????? ? ? ? ? ? 257ad35ee0b12a714530c30dccf9210f drwxr-xr-x 3 root root 57 2009-08-19 16:58 9c89a78e93ae6738e01136db9153361b ?????????? ? ? ? ? ? e6eacc985fea729b2d5bc74078632738 The md5 strings are actual directory names and not part of the error. The question marks are odd, and any directory with a question mark throws an io error when you attempt to use/delete/etc it. I was unable to umount the drive due to "busy". Rebooting the server "fixed" it but it was throwing some raid errors on shutdown. I have configured two raid 5 arrays and both started doing this on random files. Both are using the following config: mkfs.xfs -l size=128m -d agcount=32 mount -t xfs -o noatime,logbufs=8 Nothing too fancy, but part of an optimized config for this box. We're not partitioning the drives and that was suggested as a possible issue. Could this be the culprit?

  Read the article

• Reasons for Ajax navigation breaking on Coldfusion/Apache when running an app in iOS fullscreen mode? [closed]

  - by frequent

  Not sure if this belongs to SO or here. I'm running a webApp using jquery, jquerymobile, requireJS and apache, coldfusion8, mysql 5.0.88 serverside. The app works fine until I try to run it in fullscreen mode on iOS (add icon to homescreen, launch app from there with <meta name="apple-mobile-web-app-capable" content="yes" /> specified). This meta tag will break the Jquery Mobile AJAX navigation. The AJAX request will fail and the requested page will be loaded as a new page, thereby restarting the app on every page change. I have chased this through the whole front end starting from requireJS through Jquery Mobiles AJAX navigation down to the AJAX request being made in Jquery. xhr.send( ( s.hasContent && s.data ) || null ); In regular browser this works no problem. In fullscreen mode, this fails (readystate=0, empty response). I have found this article, which argues that fullscreen mode is like a browser instance with different HTTP strings. On ASP.net this results in the browser not being identified by the server and only basic browser settings being assumed (e.g. no Javascript). I'm a little lost where to start looking for possible reasons serverside. I have not written any server code for handling Ajax page navigation, so this must be something that is handled out of the box by Coldfusion or Apache? Question: Where could I start looking for problable causes of fullscreen mode breaking AJAX navigation if I assume Coldfusion or Apache are the culprits? Is there a setting I'm missing in httpd.config? What else could be the problem? Thanks for inputs!

  Read the article

• Inexpensive (used) hardware for Xen virtualization test?

  - by Jason Antman

  Virtualization is one of the areas where I could really use some experience. I also run quite a few services (web, mail, dns, etc.) out of my home. Since most of my hardware is getting a bit old (I'm running on stuff that was surplused years ago...) I decided that it's about time I start renewing some things, and also play around with virtualization a bit more. My plan is to setup a SAN box (simple iSCSI target, relatively inexpensive gigE switch), get a pair (for starters) of new servers, and start building some new stuff with Xen, specifically planning on playing with live migration and full virtualization. Does anyone have recommendations for used, older "servers" (really anything in a rack-mount form factor, I'm not too worried about things like iLO/iLOM for the test nodes) that support VT-x/AMD-V? I'm biased to HP, but it looks like they didn't make Proliants with VT-x/Vanderpool processors until G6 (for the DL360) or so, which is way out of my price range. I'm looking in the sub-$300 range (or less, if possible), used, probably Ebay. Any recommendations are greatly appreciated. Edit:And, to catch this before the comments start coming - these are personal systems. I have first-generation Proliants still in use (I got them as corporate surplus in 05, they've been running since then, and probably were running since 01 or 02 prior to being sold). I don't need anything shiny and new - I've got a bunch of old boxes, at least one complete replacement for every model in use, and that's fine for me (and easy on the wallet).

  Read the article

< Previous Page | 617 618 619 620 621 622 623 624 625 626 627 628  | Next Page >