block device - Page 622

Make a Drive Image Using an Ubuntu Live CD

- by Trevor Bekolay

Cloning a hard drive is useful, but what if you have to make several copies, or you just want to make a complete backup of a hard drive? Drive images let you put everything, and we mean everything, from your hard drive in one big file. With an Ubuntu Live CD, this is a simple process – the versatile tool dd can do this for us right out of the box. We’ve used dd to clone a hard drive before. Making a drive image is very similar, except instead of copying data from one hard drive to another, we copy from a hard drive to a file. Drive images are more flexible, as you can do what you please with the data once you’ve pulled it off the source drive. Your drive image is going to be a big file, depending on the size of your source drive – dd will copy every bit of it, even if there’s only one tiny file stored on the whole hard drive. So, to start, make sure you have a device connected to your computer that will be large enough to hold the drive image. Some ideas for places to store the drive image, and how to connect to them in an Ubuntu Live CD, can be found at this previous Live CD article. In this article, we’re going to make an image of a 1GB drive, and store it on another hard drive in the same PC. Note: always be cautious when using dd, as it’s very easy to completely wipe out a drive, as we will show later in this article. Creating a Drive Image Boot up into the Ubuntu Live CD environment. Since we’re going to store the drive image on a local hard drive, we first have to mount it. Click on Places and then the location that you want to store the image on – in our case, a 136GB internal drive. Open a terminal window (Applications > Accessories > Terminal) and navigate to the newly mounted drive. All mounted drives should be in /media, so we’ll use the command cd /media and then type the first few letters of our difficult-to-type drive, press tab to auto-complete the name, and switch to that directory. If you wish to place the drive image in a specific folder, then navigate to it now. We’ll just place our drive image in the root of our mounted drive. The next step is to determine the identifier for the drive you want to make an image of. In the terminal window, type in the command sudo fdisk -l Our 1GB drive is /dev/sda, so we make a note of that. Now we’ll use dd to make the image. The invocation is sudo dd if=/dev/sda of=./OldHD.img This means that we want to copy from the input file (“if”) /dev/sda (our source drive) to the output file (“of”) OldHD.img, which is located in the current working directory (that’s the “.” portion of the “of” string). It takes some time, but our image has been created…Let’s test to make sure it works. Drive Image Testing: Wiping the Drive Another interesting thing that dd can do is totally wipe out the data on a drive (a process we’ve covered before). The command for that is sudo dd if=/dev/urandom of=/dev/sda This takes some random data as input, and outputs it to our drive, /dev/sda. If we examine the drive now using sudo fdisk –l, we can see that the drive is, indeed, wiped. Drive Image Testing: Restoring the Drive Image We can restore our drive image with a call to dd that’s very similar to how we created the image. The only difference is that the image is going to be out input file, and the drive now our output file. The exact invocation is sudo dd if=./OldHD.img of=/dev/sda It takes a while, but when it’s finished, we can confirm with sudo fdisk –l that our drive is back to the way it used to be! Conclusion There are a lots of reasons to create a drive image, with backup being the most obvious. Fortunately, with dd creating a drive image only takes one line in a terminal window – if you’ve got an Ubuntu Live CD handy! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDCreate a Bootable Ubuntu USB Flash Drive the Easy WayHow to Browse Without a Trace with an Ubuntu Live CDWipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy WayClone a Hard Drive Using an Ubuntu Live CD TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace

Read the article

10 Great Free Icon Packs To Theme Your Android Phone

- by Chris Hoffman

Android allows you to customize your home screen, adding widgets, arranging shortcuts and folders, choosing a background, and even replacing the included launcher entirely. You can install icon packs to theme your app icons, too. Third-party launchers use standard app icons by default, but they don’t have to. You can install icon packs that third-party launchers will use in place of standard app icons. How to Use Icon Packs To use icon packs, you’ll need to use a third-party launcher that supports them, such as Nova, Apex, ADW, Go Launcher, Holo Launcher, or Action Launcher Pro. Once you’re using a third-party launcher, you can install an icon pack and go into your launcher’s settings. You’ll find an option that allows you to choose between the icon packs you’ve installed. Many of these icon packs also include wallpapers, which you can set in the normal way. MIUI 5 Icons This icon pack offers over 1900 free icons that are similar to the icons used by the MIUi ROM developed by China’s Xiaomi Tech. The large list of icons is a big plus — this pack will give the majority of your app icons a very slick, consistent look. DCikonZ Theme DCikonZ is a free icon theme that includes a whopping 4000+ icons with a consistent look. This icon theme stands out not just because it’s huge, but also for offering for going in its own direction and avoiding the super-simple, flat look many icon packs use. Holo Icons Holo Icons replaces many app icons with simple, consistent-looking that match Google’s Holo style. If you’re a fan of Android’s Holo look, give it a try. It even tweaks many of the icons from Google’s own apps to make them look more consistent. Square Icon Pack Square Icon Pack turns your icons into simple squares. Even Google Chrome becomes an orb instead of a square. This makes every icon a consistent size and offers a unique look. The icons here almost look a bit like the small-size tiles available on Windows Phone and Windows 8.1. The free version doesn’t offer as many icons as the paid version, but it does offer icons for many popular apps. Rounded Want rounded icons instead? Try the Rounded icon theme, which offers simple rounded icons. The developer says they’re inspired by the consistently round icons used on Mozilla’s Firefox OS. Crumbled Icon Pack Crumbled Icon Pack applies an effect that makes icons look as if they’r crumbling. Rather than theming individual icons, Crumbled Icon Pack adds an effect to every app icon on your device. This means that all your app icons will be themed and consistent. Dainty Icon Pack Is your Android home screen too colorful? Dainty Icon Pack offers simple, gray-on-white icons for over 1200 apps. It’d be ideal over a simple background. The contrast may be a bit low here with the gray-on-white, but it’s otherwise very slick. Simplex Icons Simplex Icons offers more contrast, with black-on-gray icons. This icon pack could simplify busy home screens, allowing photographic wallpapers to come through. Min Icon Set Min attempts to go as minimal as possible, offering simple white icons for over 570 apps. It would be ideal over a simple wallpaper with app names hidden in your launcher, offering a calming, minimal home screen. For apps it doesn’t recognize, it will enclose part of the app’s icon in a white circle. Elegance Elegance goes in another direction entirely, offering icons that incorporate more details and gradients rather than going for minimalism. Its over 1200 icons offer another good option for people who aren’t into the minimal, flat look. Icon pack designers generally have to create and include their own icons to replace icons associated with specific apps, so you’ll probably find a few of your app icons aren’t replaced with most of these themes. Of course, a standard Android phone without an icon pack doesn’t have consistent icons, either. Even if all the icons in your app drawer aren’t themed, the few app icons you have on your home screen will be if you use widely used apps.

Read the article

Formal Languages, Inductive Proofs & Regular Expressions

- by MarkPearl

So I am slogging away at my UNISA stuff. I have just finished doing the initial once non stop read through the first 11 chapters of my COS 201 Textbook - “Introduction to Computer Theory 2nd Edition” by Daniel Cohen. It has been an interesting couple of days, with familiar concepts coming up as well as some new territory. In this posting I am going to cover the first couple of chapters of the book. Let start with Formal Languages… What exactly is a formal language? Pretty much a no duh question for me but still a good one to ask – a formal language is a language that is defined in a precise mathematical way. Does that mean that the English language is a formal language? I would say no – and my main motivation for this is that one can have an English sentence that is correct grammatically that is also ambiguous. For example the ambiguous sentence: "I once shot an elephant in my pyjamas.” For this and possibly many other reasons that I am unaware of, English is termed a “Natural Language”. So why the importance of formal languages in computer science? Again a no duh question in my mind… If we want computers to be effective and useful tools then we need them to be able to evaluate a series of commands in some form of language that when interpreted by the device no confusion will exist as to what we were requesting. Imagine the mayhem that would exist if a computer misinterpreted a command to print a document and instead decided to delete it. So what is a Formal Language made up of… For my study purposes a language is made up of a finite alphabet. For a formal language to exist there needs to be a specification on the language that will describe whether a string of characters has membership in the language or not. There are two basic ways to do this: By a “machine” that will recognize strings of the language (e.g. Finite Automata). By a rule that describes how strings of a language can be formed (e.g. Regular Expressions). When we use the phrase “string of characters”, we can also be referring to a “word”. What is an Inductive Proof? So I am not to far into my textbook and of course it starts referring to proofs and different types. I have had to go through several different approaches of proofs in the past, but I can never remember their formal names , so when I saw “inductive proof” I thought to myself – what the heck is that? Google to the rescue… An inductive proof is like a normal proof but it employs a neat trick which allows you to prove a statement about an arbitrary number n by first proving it is true when n is 1 and then assuming it is true for n=k and showing it is true for n=k+1. The idea is that if you want to show that someone can climb to the nth floor of a fire escape, you need only show that you can climb the ladder up to the fire escape (n=1) and then show that you know how to climb the stairs from any level of the fire escape (n=k) to the next level (n=k+1). Does this sound like a form of recursion? No surprise then that in the same chapter they deal with recursive definitions. An example of a recursive definition for the language EVEN would the 3 rules below: 2 is in EVEN If x is in EVEN then so is x+2 The only elements in the set EVEN are those that be produced by the rules above. Nothing to exciting… So if a definition for a language is done recursively, then it makes sense that the language can be proved using induction. Regular Expressions So I am wondering to myself what use is this all – in fact – I find this the biggest challenge to any university material is that it is quite hard to find the immediate practical applications of some theory in real life stuff. How great was my joy when I suddenly saw the word regular expression being introduced. I had been introduced to regular expressions on Stack Overflow where I was trying to recognize if some text measurement put in by a user was in a valid form or not. For instance, the imperial system of measurement where you have feet and inches can be represented in so many different ways. I had eventually turned to regular expressions as an easy way to check if my parser could correctly parse the text or not and convert it to a normalize measurement. So some rules about languages and regular expressions… Any finite language can be represented by at least one if not more regular expressions A regular expressions is almost a rule syntax for expressing how regular languages can be formed regular expressions are cool For a regular expression to be valid for a language it must be able to generate all the words in the language and no other words. This is important. It doesn’t help me if my regular expression parses 100% of my measurement texts but also lets one or two invalid texts to pass as well. Okay, so this posting jumps around a bit – but introduces some very basic fundamentals for the subject which will be built on in later postings… Time to go and do some practical examples now…

Read the article

FAT Volume and CE

- by Kate Moss' Open Space

Whenever we format a disk volume, it is a good idea to name the label so it will be easier to categorize. To label a volume, we can use LABEL command or UI depends on your preference. Windows CE does provide FAT driver and support various format (FAT12, FAT16,FAT32, ExFAT and TFAT - transaction-safe FAT) and many feature to let you scan and even defrag the volume but not labeling. At any time you format a volume in CE and then mount it on PC, the label is always empty! Of course, you can always label the volume on PC, even it is formatted in CE. So looks like CE does not care about the volume label at all, neither report the label to OS nor changing the label on FAT.So how can we set the volume label in CE? To Answer this question, we need to know how does FAT stores the volume label. Here are some on-line resources are handy for parsing FAT. http://en.wikipedia.org/wiki/File_Allocation_Table http://www.pjrc.com/tech/8051/ide/fat32.html http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx You can refer to PUBLIC\COMMON\OAK\DRIVERS\FSD\FATUTIL\MAIN\bootsec.h and dosbpb.h or the above links for the fields we discuss here. The first sector of a FAT Volume (it is not necessary to be the first sector of a disk.) is a FAT boot sector and BPB (BIOS Parameter Block). And at offset 43, bgbsVolumeLabel (or bsVolumeLabel on FAT16) is for storing the volume lable, but note in the spec also indicates "FAT file system drivers should make sure that they update this field when the volume label file in the root directory has its name changed or created.". So we can't just simply update the bgbsVolumeLabel but also need to create a volume lable file in root directory. The volume lable file is not a real file but just a file entry in root directory with zero file lenth and a very special file attribute, ATTR_VOLUME_ID. (defined in public\common\oak\drivers\fsd\fatutil\MAIN\fatutilp.h) Locating and accessing bootsector is quite straight forward, as long as we know the starting sector of a FAT volume, that's it. But where is the root directory? The layout of a typical FAT is like this Boot sector (Volume ID in the figure) followed by Reserved Sectors (1 on FAT12/16 and 32 on FAT32), then FAT chain table(s) (can be 1 or 2), after that is the root directory (FAT12/16 and not shows in the figure) then begining of the File and Directories. In FAT12/16, the root directory is placed right after FAT so it is not hard to caculate the offset in the volume. But in FAT32, this rule is no longer true: the first cluster of the root directory is determined by BGBPB_RootDirStrtClus (or offset 44 in boot sector). Although this field is usually 0x00000002 (it is how CE initial the root directory after formating a volume. Note we should never assume it is always true) which means the first cluster contains data but not like the root directory is contiguous in FAT12/16, it is just like a regular file can be fragmented. So we need to access the root directory (of FAT32) hopping one cluster to another by traversing FAT table. Let's trace the code now. Although the source of FAT driver is not available in CE Shared Source program, but the formatter, Fatutil.dll, is available in public\common\oak\drivers\fsd\fatutil\MAIN\formatdisk.cpp. Be aware the public code only provides formatter for FAT12/16/32 for ExFAT it is still not available. FormatVolumeInternal is the main worker function. With the knowledge here, you should be able the trace the code easily. But I would like to discuss the following code pieces dwReservedSectors = (fo.dwFatVersion == 32) ? 32 : 1; dwRootEntries = (fo.dwFatVersion == 32) ? 0 : fo.dwRootEntries; Note the dwReservedSectors is 32 in FAT32 and 1 in FAT12/16. Root Entries is another different mentioned in previous paragraph, 0 for FAT32 (dynamic allocated) and fixed size (usually 512, defined in DEFAULT_ROOT_ENTRIES in public\common\sdk\inc\fatutil.h) And then here memset(pBootSec->bsVolumeLabel, 0x20, sizeof(pBootSec->bsVolumeLabel)); It sets the Volume Label as empty string. Now let's carry on to the next section - write the root directory. if (fo.dwFatVersion == 32) { if (!(fo.dwFlags & FATUTIL_FORMAT_TFAT)) { dwRootSectors = dwSectorsPerCluster; } else { DIRENTRY dirEntry; DWORD offset; int iVolumeNo; memset(pbBlock, 0, pdi->di_bytes_per_sect); memset(&dirEntry, 0, sizeof(DIRENTRY)); dirEntry.de_attr = ATTR_VOLUME_ID; // the first one is volume label memcpy(dirEntry.de_name, "TFAT ", sizeof (dirEntry.de_name)); memcpy(pbBlock, &dirEntry, sizeof(dirEntry)); ... // Skip the next step of zeroing out clusters dwCurrentSec += dwSectorsPerCluster; dwRootSectors = 0; } } // Each new root directory sector needs to be zeroed. memset(pbBlock, 0, cbSizeBlk); iRootSec=0; while ( iRootSec < dwRootSectors) { Basically, the code zero out the each entry in root directory depends on dwRootSectors. In FAT12/16, the dwRootSectors is calculated as the sectors we need for the root entries (512 for most of the case) and in FAT32 it just zero out the one cluster. Please note that, if it is a TFAT volume, it initialize the root directory with special volume label entries for some special purpose. Despite to its unusual initialization process for TFAT, it does provide a example for how to create a volume entry. With some minor modification, we can assign the volume label in FAT formatter and also remember to sync the volume label with bsVolumeLabel or bgbsVolumeLabel in boot sector.

Read the article

Minidlna Directory Issues

- by Somnambulist

I've done my searching and can't find an answer to THIS specific issue. I have my minidlna set up and running - but it's not really done properly. First off, when I open the server on my bluray player, all of my movies are listed twice - when they are certainly not saved on my external twice. Second, when I open the server - rather than reading "Movies" "TV" "Music", etc - It just mashes all of my movies, tv, and some other folders all together with no real organization. I never had this problem when I had my Windows set up, so I know it's something configured improperly more-so than my external drive giving me gruff. Here's my minidlna.conf file: # This is the configuration file for the MiniDLNA daemon, a DLNA/UPnP-AV media # server. # # Unless otherwise noted, the commented out options show their default value. # # On Debian, you can also refer to the minidlna.conf(5) man page for # documentation about this file. media_dir=/media/somnambulist/Ghost In You # This option can be specified more than once if you want multiple directories # scanned. # # If you want to restrict a media_dir to a specific content type, you can # prepend the directory name with a letter representing the type (A, P or V), # followed by a comma, as so: # * "A" for audio (eg. media_dir=A,/var/lib/minidlna/music) # * "P" for pictures (eg. media_dir=P,/var/lib/minidlna/pictures) # * "V" for video (eg. media_dir=V,/var/lib/minidlna/videos) # # WARNING: After changing this option, you need to rebuild the database. Either # run minidlna with the '-R' option, or delete the 'files.db' file # from the db_dir directory (see below). # On Debian, you can run, as root, 'service minidlna force-reload' instead. #media_dir=/var/lib/minidlna media_dir=V,/media/somnambulist/Ghost In You/Movies media_dir=V,/media/somnambulist/Ghost In You/TV media_dir=P,/home/somnambulist/Pictures # Path to the directory that should hold the database and album art cache. db_dir=/home/somnambulist/serverart # Path to the directory that should hold the log file. log_dir=/home/somnambulist/serverlog # Minimum level of importance of messages to be logged. # Must be one of "off", "fatal", "error", "warn", "info" or "debug". # "off" turns of logging entirely, "fatal" is the highest level of importance # and "debug" the lowest. #log_level=warn # Use a different container as the root of the directory tree presented to # clients. The possible values are: # * "." - standard container # * "B" - "Browse Directory" # * "M" - "Music" # * "P" - "Pictures" # * "V" - "Video" # if you specify "B" and client device is audio-only then "Music/Folders" will be used as root root_container=B # Network interface(s) to bind to (e.g. eth0), comma delimited. #network_interface= # IPv4 address to listen on (e.g. 192.0.2.1). #listening_ip= # Port number for HTTP traffic (descriptions, SOAP, media transfer). port=8200 # URL presented to clients. # The default is the IP address of the server on port 80. #presentation_url=http://example.com:80 # Name that the DLNA server presents to clients. friendly_name=Somnambulist Media Server # Serial number the server reports to clients. serial=12345678 # Model name the server reports to clients. #model_name=Windows Media Connect compatible (MiniDLNA) # Model number the server reports to clients. model_number=1 # Automatic discovery of new files in the media_dir directory. #inotify=yes # List of file names to look for when searching for album art. Names should be # delimited with a forward slash ("/"). album_art_names=Cover.jpg/cover.jpg/AlbumArtSmall.jpg/albumartsmall.jpg/AlbumArt.jpg/albumart.jpg/Album.jpg/album.jpg/Folder.jpg/folder.jpg/Thumb.jpg/thumb.jpg # Strictly adhere to DLNA standards. # This allows server-side downscaling of very large JPEG images, which may # decrease JPEG serving performance on (at least) Sony DLNA products. #strict_dlna=no # Support for streaming .jpg and .mp3 files to a TiVo supporting HMO. #enable_tivo=no # Notify interval, in seconds. #notify_interval=895 # Path to the MiniSSDPd socket, for MiniSSDPd support. #minissdpdsocket=/run/minissdpd.sock` And here's the error I get in terminal when I run: sudo service minidlna restart sudo service minidlna force-reload Force restart error: Restarting DLNA/UPnP-AV media server minidlna [2013/08/12 21:19:27] minidlna.c:474: error: Media directory "/media/somnambulist/Ghost In You/Movies" not accessible! [Permission denied] [2013/08/12 21:19:27] minidlna.c:474: error: Media directory "/media/somnambulist/Ghost In You/TV" not accessible! [Permission denied] Force-reload error: Restarting DLNA/UPnP-AV media server minidlna [2013/08/12 21:19:46] minidlna.c:474: error: Media directory "/media/somnambulist/Ghost In You/Movies" not accessible! [Permission denied] [2013/08/12 21:19:46] minidlna.c:474: error: Media directory "/media/somnambulist/Ghost In You/TV" not accessible! [Permission denied] rm: cannot remove ‘/home/somnambulist/serverart/files.db’: Permission denied rm: cannot remove ‘/home/somnambulist/serverart/art_cache/media/somnambulist/Ghost In You/Movies/Slumdog Millionaire/Slumdog.Millionaire.Cover.jpg’: Permission denied rm: cannot remove ‘/home/somnambulist/serverart/art_cache/media/somnambulist/Ghost In You/Movies/Zack and Miri Make a Porno/ZackAndMiriMakeAPornoCover.jpg’: Permission denied [2013/08/12 21:19:46] minidlna.c:744: warn: Failed to clean old file cache. [ OK ] I've spent hours on this at this point, read through various files - and even had a friend who is relatively Ubuntu-savvy try to help me via chat - no such luck. Thanks in advance for any help.

Read the article

HTML5 and CSS3 Editing in Windows Live Writer

- by Rick Strahl

Windows Live Writer is a wonderful tool for editing blog posts and getting them posted to your blog. What makes it nice is that it has a small set of useful features, plus a simple plug-in model that has spawned many useful add-ins. Small tool with a reasonably decent plug-in model to extend equals a great solution to a simple problem. If you're running Windows, have a blog and aren’t using Live Writer you’re probably doing it wrong…One of Live Writer’s nice features is that it can download your blog’s CSS for preview and edit displays. It lets you edit your content inside of the context of that CSS using the WYSIWYG editor, so your content actually looks very close to what you’ll see on your blog while you’re editing your post. Unfortunately Live Writer renders the HTML content in the Web Browser Control’s default IE 7 rendering mode. Yeah you read that right: IE 7 is the default for the Web Browser control and most applications that use it, are stuck in this modus unless the application explicitly overrides this default. The Web Browser control does not use the version of Internet Explorer installed on the system (IE 10 on my Win8 machine) but uses IE 7 mode for ‘compatibility’ for old applications.If you are importing your blog’s CSS that may suck if you’re using rich HTML 5 and CSS 3 formatting. Hack the Registry to get Live Writer to render using IE 9 or 10In order to get Live Writer (or any other application that uses the Web Browser Control for that matter) to render you can apply a registry hack that overrides the Web Browser Control engine usage for a specific application. I wrote about this in detail in a previous blog post a couple of years back.Here’s how you can set up Windows Live Writer to render your CSS 3 by making a change in your registry:The above is for setup on a 64 bit machine, where I configure Live Writer which is a 32 bit application for using IE 10 rendering. The keys set are as follows:32bit Configuration on 64 bit machine:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BROWSER_EMULATIONKey: WindowsLiveWriter.exeValue: 9000 or 10000 (IE 9 or 10 respectively) (DWORD value)On a 32 bit only machine: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BROWSER_EMULATIONKey: WindowsLiveWriter.exeValue: 9000 or 10000 (IE 9 or 10 respectively) (DWORD value)Use decimal values of 9000, 10000 or 11000 to specify specific versions of Internet Explorer. This is a minor tweak, but it’s nice to actually see my blog posts now with the proper CSS formatting intact. Notice the rounded borders and shadow on the code blocks as well as the overflow-x and scrollbars that show up. In this particular case I can see what the code blocks actually look like in a specific resolution – much better than in the old plain view which just chopped things off at the end of the window frame. There are a few other elements that now show properly in the editor as well including block quotes and note boxes that I occasionally use. It’s minor stuff, but it makes the editing experience better yet and closer to the final things so there are less republish operations than I previously had. Sweet!Note that this approach of putting an IE version override into the registry works with most applications that use the Web Browser control. If you are using the Web Browser control in your own applications, it’s a good idea to switch the browser to a more recent version so you can take advantage of HTML 5 and CSS 3 in your browser displayed content by automatically setting this flag in the registry or as part of the application’s startup routine if not dedicated setup tool is used. At the very least you might set it to 9000 (IE 9) which supports most of the basic CSS3 features and is a decent baseline that works for most Windows 7 and 8 machines. If running pre-IE9, the browser will fall back to IE7 rendering and look bad but at least more recent browsers will see an improved experience.I’m surprised that there aren’t more vendors and third party apps using this feature. You can see in my first screen shot that there are only very few entries in the registry key group on my machine – any other apps use the Web Browser control are using IE7. Go figure. Certainly Windows Live Writer should be writing this key into the registry automatically as part of installation to support this functionality out of the box, but alas since it does not, this registry hack lets you get your way anyway…Resources.reg Files to register Live Write Browser Emulation (set for IE9)Specifying Internet Explorer Version for ApplicationsSnagIt LiveWriter Plug-inDownload Windows Live WriterDownload Windows Live Writer with Chocolatey© Rick Strahl, West Wind Technologies, 2005-2013Posted in Live Writer Windows Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Running Jetty under Windows Azure Using RoleEntryPoint in a Worker Role

- by Shawn Cicoria

This post is built upon the work of Mario Kosmiskas and David C. Chou’s prior postings – from here: http://blogs.msdn.com/b/mariok/archive/2011/01/05/deploying-java-applications-in-azure.aspx http://blogs.msdn.com/b/dachou/archive/2010/03/21/run-java-with-jetty-in-windows-azure.aspx As Mario points out in his post, when you need to have more control over the process that starts, it generally is better left to a RoleEntryPoint capability that as of now, requires the use of a CLR based assembly that is deployed as part of the package to Azure. There were things I liked especially about Mario’s post – specifically, the ability to pull down the JRE and Jetty runtimes at role startup and instantiate the process using the extracted bits. The way Mario initialized the java process (and Jetty) was to take advantage of a role startup task configured as part of the service definition. This is a great quick way to kick off processes or tasks prior to your role entry point. However, if you need access to service configuration values or role events, that’s where RoleEntryPoint comes in. For this PoC sample I moved the logic for retrieving the bits for the jre and jetty to the worker roles OnStart – in addition to moving the process kickoff to the OnStart method. The Run method at this point is there to loop and just report the status of the java process. Beyond just making things more parameterized, both Mario’s and David’s articles still form the essence of the approach. The solution that accompanies this post provides all the necessary .NET based Visual Studio project. In addition, you’ll need: 1. Jetty 7 runtime http://www.eclipse.org/jetty/downloads.php 2. JRE http://www.oracle.com/technetwork/java/javase/downloads/index.html Once you have these the first step is to create archives (zips) of the distributions. For this PoC, the structure of the archive requires that the root of the archive looks as follows: JRE6.zip jetty---.zip Upload the contents to a storage container (block blob), and for this example I used /archives as the location. The service configuration has several settings that allow, which is the advantage of using RoleEntryPoint, the ability to provide these things via native configuration support from Azure in a worker role. Storage Explorer You can use development storage for testing this out – the zipped version of the solution is configured for development storage. When you’re ready to deploy, you update the two settings – 1 for diagnostics and the other for the storage container where the /archives are going to be stored. <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="HostedJetty" osFamily="2" osVersion="*"> <Role name="JettyWorker"> <Instances count="1" /> <ConfigurationSettings>  <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="JettyArchive" value="jetty-distribution-7.3.0.v20110203b.zip" /> <Setting name="StartRole" value="true" /> <Setting name="BlobContainer" value="archives" /> <Setting name="JreArchive" value="jre6.zip" />  <Setting name="StorageCredentials" value="UseDevelopmentStorage=true" /> For interacting with Storage you can use several tools – one tool that I like is from the Windows Azure CAT team located here: http://appfabriccat.com/2011/02/exploring-windows-azure-storage-apis-by-building-a-storage-explorer-application/ and shown in the prior picture At runtime, during role initialization and startup, Azure will call into your RoleEntryPoint. At that time the code will do a dynamic pull of the 2 archives and extract – using the Sharp Zip Lib <link> as Mario had demonstrated in his sample. The only different here is the use of CLR code vs. PowerShell (which is really CLR, but that’s another discussion). At this point, once the 2 zips are extracted, the Role’s file system looks as follows: Worker Role approot From there, the OnStart method (which also does the download and unzip using a simple StorageHelper class) kicks off the Java path and now you have Java! Task Manager Jetty Sample Page A couple of things I’m working on to enhance this is to extract the jre and jetty bits not to the appRoot but to a resource location defined as part of the service definition. ServiceDefinition.csdef <?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="HostedJetty" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WorkerRole name="JettyWorker"> <Imports> <Import moduleName="Diagnostics" /> <Import moduleName="RemoteAccess" /> <Import moduleName="RemoteForwarder" /> </Imports> <Endpoints> <InputEndpoint name="JettyPort" protocol="tcp" port="80" localPort="8080" /> </Endpoints> <LocalResources> <LocalStorage name="Archives" cleanOnRoleRecycle="false" sizeInMB="100" /> </LocalResources> As the concept matures a bit, being able to update dynamically the content or jar files as part of a running java solution is something that is possible through continued enhancement of this simple model. The Visual Studio 2010 Solution is located here: HostingJavaSln_NDA.zip

Read the article

Silverlight 5 – What’s New? (Including Screenshots & Code Snippets)

- by mbcrump

Silverlight 5 is coming next year (2011) and this blog post will tell you what you need to know before the beta ships. First, let me address people saying that it is dead after PDC 2010. I believe that it’s best to see what the market is doing, not the vendor. Below is a list of companies that are developing Silverlight 4 applications shown during the Silverlight Firestarter. Some of the companies have shipped and some haven’t. It’s just great to see the actual company names that are working on Silverlight instead of “people are developing for Silverlight”. The next thing that I wanted to point out was that HTML5, WPF and Silverlight can co-exist. In case you missed Scott Gutherie’s keynote, they actually had a slide with all three stacked together. This shows Microsoft will be heavily investing in each technology. Even I, a Silverlight developer, am reading Pro HTML5. Microsoft said that according to the Silverlight Feature Voting site, 21k votes were entered. Microsoft has implemented about 70% of these votes in Silverlight 5. That is an amazing number, and I am crossing my fingers that Microsoft bundles Silverlight with Windows 8. Let’s get started… what’s new in Silverlight 5? I am going to show you some great application and actual code shown during the Firestarter event. Media Hardware Video Decode – Instead of using CPU to decode, we will offload it to GPU. This will allow netbooks, etc to play videos. Trickplay – Variable Speed Playback – Pitch Correction (If you speed up someone talking they won’t sound like a chipmunk). Power Management – Less battery when playing video. Screensavers will no longer kick in if watching a video. If you pause a video then screensaver will kick in. Remote Control Support – This will allow users to control playback functions like Pause, Rewind and Fastforward. IIS Media Services 4 has shipped and now supports Azure. Data Binding Layout Transitions – Just with a few lines of XAML you can create a really rich experience that is not using Storyboards or animations. RelativeSource FindAncestor – Ancestor RelativeSource bindings make it much easier for a DataTemplate to bind to a property on a container control. Custom Markup Extensions – Markup extensions allow code to be run at XAML parse time for both properties and event handlers. This is great for MVVM support. Changing Styles during Runtime By Binding in Style Setters – Changing Styles at runtime used to be a real pain in Silverlight 4, now it’s much easier. Binding in style setters allows bindings to reference other properties. XAML Debugging – Below you can see that we set a breakpoint in XAML. This shows us exactly what is going on with our binding. WCF & RIA Services WS-Trust Support – Taken from Wikipedia: WS-Trust is a WS-* specification and OASIS standard that provides extensions to WS-Security, specifically dealing with the issuing, renewing, and validating of security tokens, as well as with ways to establish, assess the presence of, and broker trust relationships between participants in a secure message exchange. You can reduce network latency by using a background thread for networking. Supports Azure now. Text and Printing Improved text clarity that enables better text rendering. Multi-column text flow, Character tracking and leading support, and full OpenType font support. Includes a new Postscript Vector Printing API that provides control over what you print . Pivot functionality baked into Silverlight 5 SDK. Graphics Immediate mode graphics support that will enable you to use the GPU and 3D graphics supports. Take a look at what was shown in the demos below. 1) 3D view of the Earth – not really a real-world application though. A doctor’s portal. This demo really stood out for me as it shows what we can do with the 3D / GPU support. Out of Browser OOB applications can now create and manage childwindows as shown in the screenshot below. Trusted OOB applications can use P/Invoke to call Win32 APIs and unmanaged libraries. Enterprise Group Policy Support allow enterprises to lock down or up the sandbox capabilities of Silverlight 5 applications. In this demo, he tore the “notes” off of the application and it appeared in a new window. See the black arrow below. In this demo, he connected a USB Device which fired off a local Win32 application that provided the data off the USB stick to Silverlight. Another demo of a Silverlight 5 application exporting data right into Excel running inside of browser. Testing They demoed Coded UI, which is available now in the Visual Studio Feature Pack 2. This will allow you to create automated testing without writing any code manually. Performance: Microsoft has worked to improve the Silverlight startup time. Silverlight 5 provides 64-bit browser support. Silverlight 5 also provides IE9 Hardware acceleration. I am looking forward to Silverlight 5 and I hope you are too. Thanks for reading and I hope you visit again soon. Subscribe to my feed CodeProject

Read the article

Simultaneously calling multiple methods on a WCF service from silverlight

- by ola karlsson

A while back I had to debug some performance issues in an existing Silverlight app, as the problem / solution was a bit obscure and finding info about it was quite tricky, I thought I’d share, maybe it can help the next person with this problem. The App On start, the app would do a number of calls to different methods on a WCF service, this to populate the UI with the necessary data. Recently one of those services had been changed and was now taking quite a bit longer than it used to. This was resulting in quite a long loading time for the whole UI, which was set up so it wouldn’t let the user interact with anything, until all the service calls had finished. First I broke out the longer running service call from the others, then removed the constraint that it had to be loaded for the UI in general to become responsive. I also added a loading indicator just on that area of the UI, thinking that the main UI would load while this particular section could keep loading independently. The Problem However this is where things started to get a bit strange. I found that even after these changes, the main UI wouldn’t activate until the long running call returned. So now, I did what I should have done to start with, I got Fiddler out and had a look at what was really happening. What I found was that, once the call to the long running service method was placed, all subsequent call were waiting for that one to return before executing. Not having really worked with WCF previously or knowing much about it in general, I was stumped… I knew of the issues where Silverlight is restricted by the browsers networking features in regards to number of simultaneous connections etc. However that just didn’t seem to be the issue here, you can clearly see in Fiddler that there’s numerous calls, but they’re just not returning. I thought of the problem maybe being in the WCF service, but the calls were really not that complicated and surely the service should be able to handle a lot more than what I was throwing at it! So I did what every developer does in this type of scenario, I hit the search engines. I did a whole bunch of searching on things like “multiple simultaneous WCF calls from Silverlight” and “Calling long running WCF services from Silverlight” etc. etc. This however, pretty much got me nowhere, I found a whole heap of resources on how to do WCF calls from Silverlight but most of them were very basic and of no use what so ever. The fog is clearing It wasn’t until I came across the term “ WCF blocking calls” and started incorporating that in my searches I started to get somewhere. Those searches quite quickly brought me to the following thread in the Silverlight forum “Long-running WCF call blocking subsequent calls” which discussed the exact problem I was facing and the best part, one of the guys there had the solution! The short answer is in the forum post and the guys answering, has also done a more extensive blog post about it called “Silverlight, WCF, and ASP.Net Configuration Gotchas” which covers it very well. So come on what’s the solution?! I heard you ask, unless you’ve already gone to the links and looked it up ;) The Solution Well, it turns out that the issue is founded in a mix of Silverlight, Asp.Net and WCF, basically if you’re doing multiple calls to a single WCF web-service and you have Asp.Net session state enabled, the calls will be executed sequentially by the service, hence any long running calls will block subsequent ones. So why is Asp.Net session state effecting us, we’re working in Silverlight, right? We'll as mentioned earlier, by default Silverlight uses the browsers networking stack when doing service calls, hence to the WCF service, the call looks like it might as well be coming from a normal Asp.Net. To get around this, we look to a feature introduced in Silverlight 3, namely the Client HTTP Stack. The Client HTTP Stack to the rescue By using the following syntax (for example in our App.xaml.cs, Application_Startup method) WebRequest.RegisterPrefix("http://", WebRequestCreator.ClientHttp); we can set our Silverlight application to use the Client HTTP Stack, which incidentally solves our problem! By using Silverlights own networking stack, rather than that of the browser, we get around the Asp.Net - WCF session state issue. The above code specifies that all calls to addresses starting with “http://” should go through the client stack, this can actually be set more granular and you can specify it to be used only for certain domains etc. Summary The actual solution is well covered in the forum and blog posts I link to above. This post is more about sharing my experience, hopefully helping to spread the word about this and maybe make it a bit easier for the next poor guy with this issue to find the solution. Until next time, Ola

Read the article

Building InstallShield based Installers using Team Build 2010

- by jehan

Last few weeks, I have been working on Application Packaging stuff using all the widely used tools like InstallShield, WISE, WiX and Visual Studio Installer. So, I thought it would be good to post about how to Build the Installers developed using these tools with Team Build 2010. This post will focus on how to build the InstallShield generated packages using Team Build 2010. For the release of VS2010, Microsoft has partnered with Flexera who are the makers of InstallShield to create InstallShield Limited Edition, especially for the customers of Visual Studio. First Microsoft planned to release WiX (Windows Installer Xml) with VS2010, but later Microsoft dropped WiX from VS2010 due to reasons which are best known to them and partnered with InstallShield for Limited Edition. It disappointed lot of people because InstallShield Limited Edition provides only few features of InstallShield and it may not feasable to build complex installer packages using this and it also requires License, where as WiX is an open source with no license costs and it has proved efficient in building most complex packages. Only the last three features are available in InstallShield Limited Edition from the total features offered by InstallShield as shown in below list. Feature Limited Edition for Visual Studio 2010 Standalone Build System Maintain a clean build machine by using only the part of InstallShield that compiles the installations. InstallShield Best Practices Validation Suite Avoid common installation issues. Try and Die Functionality RCreate a fully functional trial version of your product. InstallShield Repackager Create Windows Installer setups from any legacy installation. Multilingual Support Present installation text in up to 35 languages. Microsoft App-V™ Support Deploy your applications as App-V virtual packages that run without conflict. Industry-Standard InstallScript Achieve maximum flexibility in your installations. Dialog Editor Modify the layout of existing end-user dialogs, create new custom dialogs, and more. Patch Creation Build updates and patches for your products. Setup Prerequisite Editor Easily control prerequisite restart behavior and source locations. String Editor View Control the localizable text strings displayed at run time with this spreadsheet-like table. Text File Changes View Configure search-and-replace actions for content in text files to be modified at run time. Virtual Machine Detection Block your installations from running on virtual machines. Unicode Support Improve multi-language installation development. Support for 64-Bit COM Extraction Extract COM data from a 64-bit COM server. Windows Installer Installation Chaining Add MSI packages to your main installation and chain them together. XML Support Save time by quickly testing XML configuration changes to installation projects. Billboard Support for Custom Branding Display Adobe Flash billboards and other graphic files during the install process. SaaS Support (IIS 7 and SSL Technologies) Easily deploy Windows-based Web applications. Project Assistant Jumpstart a project by using a simplified set of views. Support for Digital Signatures Save time by digitally signing all your files at build time. Easily Run Custom Actions Schedule a custom action to run at precisely the right moment in your installation. Installation Prerequisites Check for and install prerequisites before your installation is executed. To create a InstallShield project in Visual Studio and Build it using Team Build 2010, first you have to add the InstallShield Project template to your Solution file. If you want to use InstallShield Limited edition you can add it from FileàNewà project àother Project Types àSetup and Deploymentà InstallShield LE and if you are using other versions of InstallShield, then you have to add it from from FileàNewà project àInstallShield Projects. Here, I’m using InstallShield 2011 Premier edition as I already have it Installed. I have created a simple package for TailSpin Application which has a Feature called Web, few components and a IIS Web Site for TailSpin application. Before started working on this, I thought I may need to build the package by calling invoke process activity in build process template or have to create a new custom activity. But, it got build without any changes to build process template. But, it was failing with below error message. C:\Program Files (x86)\MSBuild\InstallShield\2011\InstallShield.targets (68): The "InstallShield.Tasks.InstallShield" task could not be loaded from the assembly C:\Program Files (x86)\MSBuild\InstallShield\2010Limited\InstallShield.Tasks.dll. Could not load file or assembly 'file:///C:\Program Files(x86)\MSBuild\InstallShield\2011\InstallShield.Tasks.dll' or one of its dependencies. An attempt was made to load a program with an incorrect format. Confirm that the <UsingTask> declaration is correct, that the assembly and all its dependencies are available, and that the task contains a public class that implements Microsoft.Build.Framework.ITask. This error is due to 64-bit build machine which I’m using. This issue will be replicable if you are queuing a build on a 64-bit build machine. To avoid this you have to ensure that you configured the build definition for your InstallShield project to load the InstallShield.Tasks.dll file (which is a 32-bit file); otherwise, you will encounter this build error informing you that the InstallShield.Tasks.dll file could not be loaded. To select the 32-bit version of MSBuild, click the Process tab of your build definition in Team Explorer. Then, under the Advanced node, find the MSBuild Platform setting, and select x86. Note that if you are using a 32-bit build machine, you can select either Auto or x86 for the MSBuild Platform setting. Once I did above changes, the build got successful.

Read the article

Out of disk space - /boot at 100%

- by uvasal

My /boot is at 100%. When I run aptitude search ~ilinux-image I'm getting loads of unused images. When I try to delete one of them (after checking which one is currently in use by doing uname -r), e.g apt-get autoremove linux-image-3.2.0-44-generic I get: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-generic : Depends: linux-headers-generic (= 3.2.0.51.61) but 3.2.0.54.64 is to be installed linux-server : Depends: linux-headers-server (= 3.2.0.51.61) but 3.2.0.54.64 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). And running apt-get -f install throws No space left on device. I've also tried doing apt-get purge but I am getting the same thing. Output of df -h and dpkg -l linux-*.: root@hb2088:/srv/www# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 9.4G 3.0G 6.0G 34% / udev 301M 4.0K 301M 1% /dev tmpfs 124M 228K 124M 1% /run none 5.0M 0 5.0M 0% /run/lock none 309M 0 309M 0% /run/shm /dev/sda1 92M 91M 0 100% /boot root@hb2088:/srv/www# dpkg -l linux-* Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-====================================================-====================================================-======================================================================================================================== un linux-doc-3.2.0 <none> (no description available) ii linux-firmware 1.79.6 Firmware for Linux kernel drivers iU linux-generic 3.2.0.51.61 Complete Generic Linux kernel un linux-headers <none> (no description available) un linux-headers-3 <none> (no description available) un linux-headers-3.0 <none> (no description available) ii linux-headers-3.2.0-44 3.2.0-44.69 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-44-generic 3.2.0-44.69 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-45 3.2.0-45.70 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-45-generic 3.2.0-45.70 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-48 3.2.0-48.74 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-48-generic 3.2.0-48.74 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-51 3.2.0-51.77 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-51-generic 3.2.0-51.77 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-52 3.2.0-52.78 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-52-generic 3.2.0-52.78 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP iU linux-headers-3.2.0-54 3.2.0-54.82 Header files related to Linux kernel version 3.2.0 iU linux-headers-3.2.0-54-generic 3.2.0-54.82 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP iU linux-headers-generic 3.2.0.54.64 Generic Linux kernel headers iU linux-headers-server 3.2.0.54.64 Linux kernel headers on Server Equipment. un linux-image <none> (no description available) un linux-image-3.0 <none> (no description available) ii linux-image-3.2.0-44-generic 3.2.0-44.69 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-45-generic 3.2.0-45.70 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-48-generic 3.2.0-48.74 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-51-generic 3.2.0-51.77 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-52-generic 3.2.0-52.78 Linux kernel image for version 3.2.0 on 64 bit x86 SMP in linux-image-3.2.0-54-generic <none> (no description available) iU linux-image-generic 3.2.0.51.61 Generic Linux kernel image iU linux-image-server 3.2.0.51.61 Linux kernel image on Server Equipment. un linux-initramfs-tool <none> (no description available) un linux-kernel-headers <none> (no description available) un linux-kernel-log-daemon <none> (no description available) ii linux-libc-dev 3.2.0-52.78 Linux Kernel Headers for development un linux-restricted-common <none> (no description available) iU linux-server 3.2.0.51.61 Complete Linux kernel on Server Equipment. un linux-source-3.2.0 <none> (no description available) un linux-tools <none> (no description available) Output of du -sh /boot/*: root@hb2088:~# du -sh /boot/* 781K /boot/abi-3.2.0-44-generic 781K /boot/abi-3.2.0-45-generic 781K /boot/abi-3.2.0-48-generic 781K /boot/abi-3.2.0-51-generic 781K /boot/abi-3.2.0-52-generic 139K /boot/config-3.2.0-44-generic 139K /boot/config-3.2.0-45-generic 139K /boot/config-3.2.0-48-generic 139K /boot/config-3.2.0-51-generic 139K /boot/config-3.2.0-52-generic 1.6M /boot/grub 14M /boot/initrd.img-3.2.0-44-generic 14M /boot/initrd.img-3.2.0-45-generic 14M /boot/initrd.img-3.2.0-48-generic 12K /boot/lost+found 174K /boot/memtest86+.bin 176K /boot/memtest86+_multiboot.bin 2.8M /boot/System.map-3.2.0-44-generic 2.8M /boot/System.map-3.2.0-45-generic 2.8M /boot/System.map-3.2.0-48-generic 2.8M /boot/System.map-3.2.0-51-generic 2.8M /boot/System.map-3.2.0-52-generic 4.8M /boot/vmlinuz-3.2.0-44-generic 4.8M /boot/vmlinuz-3.2.0-45-generic 4.8M /boot/vmlinuz-3.2.0-48-generic 4.8M /boot/vmlinuz-3.2.0-51-generic 4.8M /boot/vmlinuz-3.2.0-52-generic

Read the article

HTG Explains: Why is Printer Ink So Expensive?

- by Chris Hoffman

Printer ink is expensive, more expensive per drop than fine champagne or even human blood. If you haven’t gone paperless, you’ll notice that you’re paying a lot for new ink cartridges — more than seems reasonable. Purchasing the cheapest inkjet printer and buying official ink cartridge replacements is the most expensive thing you can do. There are ways to save money on ink if you must continue to print documents. Cheap Printers, Expensive Ink Ink jet printers are often very cheap. That’s because they’re sold at cost, or even at a loss — the manufacturer either makes no profit from the printer itself or loses money. The manufacturer will make most of its money from the printer cartridges you buy later. Even if the company does make a bit of money from each printer sold, it makes a much larger profit margin on ink. Rather than selling you a printer that may be rather expensive, they want to sell you a cheap printer and make money on an ongoing basis by providing expensive printer ink. It’s been compared to the razor model — sell a razor cheaply and mark up the razor blades. Rather than making a one-time profit on the razor, you’ll make continuing profit as the customer keeps buying razor blade replacements — or ink, in this case. Many printer manufacturers go out of their way to make it difficult for you to use unofficial ink cartridges, building microchips into their official ink cartridges. If you use an unofficial cartridge or refill an official cartridge, the printer may refuse to use it. Lexmark once argued in court that unofficial microchips that enable third-party ink cartridges would violate their copyright and Lexmark has argued that creating an unofficial microchip to bypass this restriction on third-party ink would violate Lexmark’s copyright and be illegal under the US DMCA. Luckily, they lost this argument. What Printer Companies Say Printer companies have put forth their own arguments in the past, attempting to justify the high cost of official ink cartridges and microchips that block any competition. In a Computer World story from 2010, HP argued that they spend a billion dollars each year on “ink research and development.” They point out that printer ink “must be formulated to withstand heating to 300 degrees, vaporization, and being squirted at 30 miles per hour, at a rate of 36,000 drops per second, through a nozzle one third the size of a human hair. After all that it must dry almost instantly on the paper.” They also argue that printers have become more efficient and use less ink to print, while third-party cartridges are less reliable. Companies that use microchips in their ink cartridges argue that only the microchip has the ability to enforce an expiration date, preventing consumers from using old ink cartridges. There’s something to all these arguments, sure — but they don’t seem to justify the sky-high cost of printer ink or the restriction on using third-party or refilled cartridges. Saving Money on Printing Ultimately, the price of something is what people are willing to pay and printer companies have found that most consumers are willing to pay this much for ink cartridge replacements. Try not to fall for it: Don’t buy the cheapest inkjet printer. Consider your needs when buying a printer and do some research. You’ll save more money in the long run. Consider these basic tips to save money on printing: Buy Refilled Cartridges: Refilled cartridges from third parties are generally much cheaper. Printer companies warn us away from these, but they often work very well. Refill Your Own Cartridges: You can get do-it-yourself kits for refilling your own printer ink cartridges, but this can be messy. Your printer may refuse to accept a refilled cartridge if the cartridge contains a microchip. Switch to a Laser Printer: Laser printers use toner, not ink cartridges. If you print a lot of black and white documents, a laser printer can be cheaper. Buy XL Cartridges: If you are buying official printer ink cartridges, spend more money each time. The cheapest ink cartridges won’t contain much ink at all, while larger “XL” ink cartridges will contain much more ink for only a bit more money. It’s often cheaper to buy in bulk. Avoid Printers With Tri-Color Ink Cartridges: If you’re printing color documents, you’ll want to get a printer that uses separate ink cartridges for all its colors. For example, let’s say your printer has a “Color” cartridge that contains blue, green, and red ink. If you print a lot of blue documents and use up all your blue ink, the Color cartridge will refuse to function — now all you can do is throw away your cartridge and buy a new one, even if the green and red ink chambers are full. If you had a printer with separate color cartridges, you’d just have to replace the blue cartridge. If you’ll be buying official ink cartridges, be sure to compare the cost of cartridges when buying a printer. The cheapest printer may be more expensive in the long run. Of course, you’ll save the most money if you stop printing entirely and go paperless, keeping digital copies of your documents instead of paper ones. Image Credit: Cliva Darra on Flickr

Read the article

HTG Explains: Are You Using IPv6 Yet? Should You Even Care?

- by Chris Hoffman

IPv6 is extremely important for the long-term health of the Internet. But is your Internet service provider providing IPv6 connectivity yet? Does your home network support it? Should you even care if you’re using IPv6 yet? Switching from IPv4 to IPv6 will give the Internet a much larger pool of IP addresses. It should also allow every device to have its own public IP address, rather than be hidden behind a NAT router. IPv6 is Important Long-Term IPv6 is very important for the long-term health of the Internet. There are only about 3.7 billion public IPv4 addresses. This may sound like a lot, but it isn’t even one IP address for each person on the planet. Considering people have more and more Internet-connected devices — everything from light bulbs to thermostats are starting to become network-connected — the lack of IP addresses is already proving to be a serious problem. This may not affect those of us in well-off developed countries just yet, but developing countries are already running out of IPv4 addresses. So, if you work at an Internet service provider, manage Internet-connected servers, or develop software or hardware — yes, you should care about IPv6! You should be deploying it and ensuring your software and hardware works properly with it. It’s important to prepare for the future before the current IPv4 situation becomes completely unworkable. But, if you’re just typical user or even a typical geek with a home Internet connection and a home network, should you really care about your home network just yet? Probably not. What You Need to Use IPv6 To use IPv6, you’ll need three things: An IPv6-Compatible Operating System: Your operating system’s software must be capable of using IPv6. All modern desktop operating systems should be compatible — Windows Vista and newer versions of Windows, as well as modern versions of Mac OS X and Linux. Windows XP doesn’t have IPv6 support installed by default, but you shouldn’t be using Windows XP anymore, anyway. A Router With IPv6 Support: Many — maybe even most — consumer routers in the wild don’t support IPv6. Check your router’s specifications details to see if it supports IPv6 if you’re curious. If you’re going to buy a new router, you’ll probably want to get one with IPv6 support to future-proof yourself. If you don’t have an IPv6-enabled router yet, you don’t need to buy a new one just to get it. An ISP With IPv6 Enabled: Your Internet service provider must also have IPv6 set up on their end. Even if you have modern software and hardware on your end, your ISP has to provide an IPv6 connection for you to use it. IPv6 is rolling out steadily, but slowly — there’s a good chance your ISP hasn’t enabled it for you yet. How to Tell If You’re Using IPv6 The easiest way to tell if you have IPv6 connectivity is to visit a website like testmyipv6.com. This website allows you to connect to it in different ways — click the links near the top to see if you can connect to the website via different types of connections. If you can’t connect via IPv6, it’s either because your operating system is too old (unlikely), your router doesn’t support IPv6 (very possible), or because your ISP hasn’t enabled it for you yet (very likely). Now What? If you can connect to the test website above via IPv6, congratulations! Everything is working as it should. Your ISP is doing a good job of rolling out IPv6 rather than dragging its feet. There’s a good chance you won’t have IPv6 working properly, however. So what should you do about this — should you head to Amazon and buy a new IPv6-enabled router or switch to an ISP that offers IPv6? Should you use a “tunnel broker,” as the test site recommends, to tunnel into IPv6 via your IPv4 connection? Well, probably not. Typical users shouldn’t have to worry about this yet. Connecting to the Internet via IPv6 shouldn’t be perceptibly faster, for example. It’s important for operating system vendors, hardware companies, and Internet service providers to prepare for the future and get IPv6 working, but you don’t need to worry about this on your home network. IPv6 is all about future-proofing. You shouldn’t be racing to implement this at home yet or worrying about it too much — but, when you need to buy a new router, try to buy one that supports IPv6. Image Credit: Adobe of Chaos on Flickr, hisperati on Flickr, Vox Efx on Flickr

Read the article

Recovering from apt-get upgrade gone wrong due to a full disk

- by Peter

I was performing an apt-get upgrade on an Ubuntu 12.04.5 LTS box that hadn't been updated in a little while and the upgrade failed due to 'No space left on device'. After a little while I worked out space meant inodes and I have freed some up but unfortunately things have been left something askew. I have tried manually installing the old versions of packages mentioned using dpkg -i but that doesn't help. I have tried apt-get upgrade and apt-get -f install to no avail. Results are below. Any ideas how to fix things up? FIXED: Installing the earlier versions again manually via dpkg -i and then apt-get -f install has done the trick. Not sure why this didn't work the first time. The packages in question are listed below but they will presumably vary. libssl1.0.0_1.0.1-4ubuntu5.14_i386.deb linux-headers-3.2.0-64-generic-pae_3.2.0-64.97_i386.deb linux-image-generic-pae_3.2.0.64.76_i386.deb linux-headers-3.2.0-64_3.2.0-64.97_all.deb linux-headers-generic-pae_3.2.0.64.76_i386.deb root@unlinked:/tmp# apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run ‘apt-get -f install’ to correct these. The following packages have unmet dependencies. libssl-dev : Depends: libssl1.0.0 (= 1.0.1-4ubuntu5.14) but 1.0.1-4ubuntu5.17 is installed linux-generic-pae : Depends: linux-image-generic-pae (= 3.2.0.64.76) but 3.2.0.67.79 is installed Depends: linux-headers-generic-pae (= 3.2.0.64.76) but 3.2.0.67.79 is installed E: Unmet dependencies. Try using -f. root@unlinked:/tmp# apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: linux-headers-3.2.0-43-generic-pae linux-headers-3.2.0-38-generic-pae linux-headers-3.2.0-41-generic-pae linux-headers-3.2.0-36-generic-pae linux-headers-3.2.0-63-generic-pae linux-headers-3.2.0-58-generic-pae linux-headers-3.2.0-60-generic-pae linux-headers-3.2.0-55-generic-pae linux-headers-3.2.0-40 linux-headers-3.2.0-41 linux-headers-3.2.0-36 linux-headers-3.2.0-37 linux-headers-3.2.0-43 linux-headers-3.2.0-38 linux-headers-3.2.0-44 linux-headers-3.2.0-39 linux-headers-3.2.0-45 linux-headers-3.2.0-51 linux-headers-3.2.0-52 linux-headers-3.2.0-53 linux-headers-3.2.0-48 linux-headers-3.2.0-54 linux-headers-3.2.0-60 linux-headers-3.2.0-55 linux-headers-3.2.0-61 linux-headers-3.2.0-56 linux-headers-3.2.0-57 linux-headers-3.2.0-63 linux-headers-3.2.0-58 linux-headers-3.2.0-59 linux-headers-3.2.0-52-generic-pae linux-headers-3.2.0-44-generic-pae linux-headers-3.2.0-39-generic-pae linux-headers-3.2.0-37-generic-pae linux-headers-3.2.0-59-generic-pae linux-headers-3.2.0-61-generic-pae linux-headers-3.2.0-56-generic-pae linux-headers-3.2.0-53-generic-pae linux-headers-3.2.0-48-generic-pae linux-headers-3.2.0-45-generic-pae linux-headers-3.2.0-40-generic-pae linux-headers-3.2.0-57-generic-pae linux-headers-3.2.0-54-generic-pae linux-headers-3.2.0-51-generic-pae Use 'apt-get autoremove' to remove them. The following extra packages will be installed: libssl-dev linux-generic-pae The following packages will be upgraded: libssl-dev linux-generic-pae 2 to upgrade, 0 to newly install, 0 to remove and 0 not to upgrade. 2 not fully installed or removed. Need to get 0 B/1,427 kB of archives. After this operation, 1,024 B of additional disk space will be used. Do you want to continue [Y/n]? y dpkg: dependency problems prevent configuration of libssl-dev: libssl-dev depends on libssl1.0.0 (= 1.0.1-4ubuntu5.14); however: Version of libssl1.0.0 on system is 1.0.1-4ubuntu5.17. dpkg: error processing libssl-dev (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates it's a follow-up error from a previous failure. dpkg: dependency problems prevent configuration of linux-generic-pae: linux-generic-pae depends on linux-image-generic-pae (= 3.2.0.64.76); however: Version of linux-image-generic-pae on system is 3.2.0.67.79. linux-generic-pae depends on linux-headers-generic-pae (= 3.2.0.64.76); however: Version of linux-headers-generic-pae on system is 3.2.0.67.79. dpkg: error processing linux-generic-pae (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates it's a follow-up error from a previous failure. Errors were encountered while processing: libssl-dev linux-generic-pae E: Sub-process /usr/bin/dpkg returned an error code (1)

Read the article

Getting Started with Prism (aka Composite Application Guidance for WPF and Silverlight)

- by dotneteer

Overview Prism is a framework from the Microsoft Patterns and Practice team that allow you to create WPF and Silverlight in a modular way. It is especially valuable for larger projects in which a large number of developers can develop in parallel. Prism achieves its goal by supplying several services: · Dependency Injection (DI) and Inversion of control (IoC): By using DI, Prism takes away the responsibility of instantiating and managing the life time of dependency objects from individual components to a container. Prism relies on containers to discover, manage and compose large number of objects. By varying the configuration, the container can also inject mock objects for unit testing. Out of the box, Prism supports Unity and MEF as container although it is possible to use other containers by subclassing the Bootstrapper class. · Modularity and Region: Prism supplies the framework to split application into modules from the application shell. Each module is a library project that contains both UI and code and is responsible to initialize itself when loaded by the shell. Each window can be further divided into regions. A region is a user control with associated model. · Model, view and view-model (MVVM) pattern: Prism promotes the user MVVM. The use of DI container makes it much easier to inject model into view. WPF already has excellent data binding and commanding mechanism. To be productive with Prism, it is important to understand WPF data binding and commanding well. · Event-aggregation: Prism promotes loosely coupled components. Prism discourages for components from different modules to communicate each other, thus leading to dependency. Instead, Prism supplies an event-aggregation mechanism that allows components to publish and subscribe events without knowing each other. Architecture In the following, I will go into a little more detail on the services provided by Prism. Bootstrapper In a typical WPF application, application start-up is controls by App.xaml and its code behind. The main window of the application is typically specified in the App.xaml file. In a Prism application, we start a bootstrapper in the App class and delegate the duty of main window to the bootstrapper. The bootstrapper will start a dependency-injection container so all future object instantiations are managed by the container. Out of box, Prism provides the UnityBootstrapper and MefUnityBootstrapper abstract classes. All application needs to either provide a concrete implementation of one of these bootstrappers, or alternatively, subclass the Bootstrapper class with another DI container. A concrete bootstrapper class must implement the CreateShell method. Its responsibility is to resolve and create the Shell object through the DI container to serve as the main window for the application. The other important method to override is ConfigureModuleCatalog. The bootstrapper can register modules for the application. In a more advance scenario, an application does not have to know all its modules at compile time. Modules can be discovered at run time. Readers to refer to one of the Open Modularity Quick Starts for more information. Modules Once modules are registered with or discovered by Prism, they are instantiated by the DI container and their Initialize method is called. The DI container can inject into a module a region registry that implements IRegionViewRegistry interface. The module, in its Initialize method, can then call RegisterViewWithRegion method of the registry to register its regions. Regions Regions, once registered, are managed by the RegionManager. The shell can then load regions either through the RegionManager.RegionName attached property or dynamically through code. When a view is created by the region manager, the DI container can inject view model and other services into the view. The view then has a reference to the view model through which it can interact with backend services. Service locator Although it is possible to inject services into dependent classes through a DI container, an alternative way is to use the ServiceLocator to retrieve a service on demard. Prism supplies a service locator implementation and it is possible to get an instance of the service by calling: ServiceLocator.Current.GetInstance<IServiceType>() Event aggregator Prism supplies an IEventAggregator interface and implementation that can be injected into any class that needs to communicate with each other in a loosely-coupled fashion. The event aggregator uses a publisher/subscriber model. A class can publishes an event by calling eventAggregator.GetEvent<EventType>().Publish(parameter) to raise an event. Other classes can subscribe the event by calling eventAggregator.GetEvent<EventType>().Subscribe(EventHandler, other options). Getting started The easiest way to get started with Prism is to go through the Prism Hands-On labs and look at the Hello World QuickStart. The Hello World QuickStart shows how bootstrapper, modules and region works. Next, I would recommend you to look at the Stock Trader Reference Implementation. It is a more in depth example that resemble we want to set up an application. Several other QuickStarts cover individual Prism services. Some scenarios, such as dynamic module discovery, are more advanced. Apart from the official prism document, you can get an overview by reading Glen Block’s MSDN Magazine article. I have found the best free training material is from the Boise Code Camp. To be effective with Prism, it is important to understands key concepts of WPF well first, such as the DependencyProperty system, data binding, resource, theme and ICommand. It is also important to know your DI container of choice well. I will try to explorer these subjects in depth in the future. Testimony Recently, I worked on a desktop WPF application using Prism. I had a wonderful experience with Prism. The Prism is flexible enough even in the presence of third party controls such as Telerik WPF controls. We have never encountered any significant obstacle.

Read the article

Class Loading Deadlocks

- by tomas.nilsson

Mattis follows up on his previous post with one more expose on Class Loading Deadlocks As I wrote in a previous post, the class loading mechanism in Java is very powerful. There are many advanced techniques you can use, and when used wrongly you can get into all sorts of trouble. But one of the sneakiest deadlocks you can run into when it comes to class loading doesn't require any home made class loaders or anything. All you need is classes depending on each other, and some bad luck. First of all, here are some basic facts about class loading: 1) If a thread needs to use a class that is not yet loaded, it will try to load that class 2) If another thread is already loading the class, the first thread will wait for the other thread to finish the loading 3) During the loading of a class, one thing that happens is that the <clinit method of a class is being run 4) The <clinit method initializes all static fields, and runs any static blocks in the class. Take the following class for example: class Foo { static Bar bar = new Bar(); static { System.out.println("Loading Foo"); } } The first time a thread needs to use the Foo class, the class will be initialized. The <clinit method will run, creating a new Bar object and printing "Loading Foo" But what happens if the Bar object has never been used before either? Well, then we will need to load that class as well, calling the Bar <clinit method as we go. Can you start to see the potential problem here? A hint is in fact #2 above. What if another thread is currently loading class Bar? The thread loading class Foo will have to wait for that thread to finish loading. But what happens if the <clinit method of class Bar tries to initialize a Foo object? That thread will have to wait for the first thread, and there we have the deadlock. Thread one is waiting for thread two to initialize class Bar, thread two is waiting for thread one to initialize class Foo. All that is needed for a class loading deadlock is static cross dependencies between two classes (and a multi threaded environment): class Foo { static Bar b = new Bar(); } class Bar { static Foo f = new Foo(); } If two threads cause these classes to be loaded at exactly the same time, we will have a deadlock. So, how do you avoid this? Well, one way is of course to not have these circular (static) dependencies. On the other hand, it can be very hard to detect these, and sometimes your design may depend on it. What you can do in that case is to make sure that the classes are first loaded single threadedly, for example during an initialization phase of your application. The following program shows this kind of deadlock. To help bad luck on the way, I added a one second sleep in the static block of the classes to trigger the unlucky timing. Notice that if you uncomment the "//Foo f = new Foo();" line in the main method, the class will be loaded single threadedly, and the program will terminate as it should. public class ClassLoadingDeadlock { // Start two threads. The first will instansiate a Foo object, // the second one will instansiate a Bar object. public static void main(String[] arg) { // Uncomment next line to stop the deadlock // Foo f = new Foo(); new Thread(new FooUser()).start(); new Thread(new BarUser()).start(); } } class FooUser implements Runnable { public void run() { System.out.println("FooUser causing class Foo to be loaded"); Foo f = new Foo(); System.out.println("FooUser done"); } } class BarUser implements Runnable { public void run() { System.out.println("BarUser causing class Bar to be loaded"); Bar b = new Bar(); System.out.println("BarUser done"); } } class Foo { static { // We are deadlock prone even without this sleep... // The sleep just makes us more deterministic try { Thread.sleep(1000); } catch(InterruptedException e) {} } static Bar b = new Bar(); } class Bar { static { try { Thread.sleep(1000); } catch(InterruptedException e) {} } static Foo f = new Foo(); }

Read the article

Monitoring ASP.NET Application

- by imran_ku07

Introduction: There are times when you may need to monitor your ASP.NET application's CPU and memory consumption, so that you can fine-tune your ASP.NET application(whether Web Form, MVC or WebMatrix). Also, sometimes you may need to see all the exceptions(and their details) of your application raising, whether they are handled or not. If you are creating an ASP.NET application in .NET Framework 4.0, then you can easily monitor your application's CPU or memory consumption and see how many exceptions your application raising. In this article I will show you how you can do this. Description: With .NET Framework 4.0, you can turn on the monitoring of CPU and memory consumption by setting AppDomain.MonitoringEnabled property to true. Also, in .NET Framework 4.0, you can register a callback method to AppDomain.FirstChanceException event to monitor the exceptions being thrown within your application's AppDomain. Turning on the monitoring and registering a callback method will add some additional overhead to your application, which will hurt your application performance. So it is better to turn on these features only if you have following properties in web.config file, <add key="AppDomainMonitoringEnabled" value="true"/> <add key="FirstChanceExceptionMonitoringEnabled" value="true"/> In case if you wonder what does FirstChanceException mean. It simply means the first notification of an exception raised by your application. Even CLR invokes this notification before the catch block that handles the exception. Now just update global.asax.cs file as, string _item = "__RequestExceptionKey"; protected void Application_Start() { SetupMonitoring(); } private void SetupMonitoring() { bool appDomainMonitoringEnabled, firstChanceExceptionMonitoringEnabled; bool.TryParse(ConfigurationManager.AppSettings["AppDomainMonitoringEnabled"], out appDomainMonitoringEnabled); bool.TryParse(ConfigurationManager.AppSettings["FirstChanceExceptionMonitoringEnabled"], out firstChanceExceptionMonitoringEnabled); if (appDomainMonitoringEnabled) { AppDomain.MonitoringIsEnabled = true; } if (firstChanceExceptionMonitoringEnabled) { AppDomain.CurrentDomain.FirstChanceException += (object source, FirstChanceExceptionEventArgs e) => { if (HttpContext.Current == null)// If no context available, ignore it return; if (HttpContext.Current.Items[_item] == null) HttpContext.Current.Items[_item] = new RequestException { Exceptions = new List<Exception>() }; (HttpContext.Current.Items[_item] as RequestException).Exceptions.Add(e.Exception); }; } } protected void Application_EndRequest() { if (Context.Items[_item] != null) { //Only add the request if atleast one exception is raised var reqExc = Context.Items[_item] as RequestException; reqExc.Url = Request.Url.AbsoluteUri; Application.Lock(); if (Application["AllExc"] == null) Application["AllExc"] = new List<RequestException>(); (Application["AllExc"] as List<RequestException>).Add(reqExc); Application.UnLock(); } } Now browse to Monitoring.cshtml file, you will see the following screen, The above screen shows you the total bytes allocated, total bytes in use and CPU usage of your application. The above screen also shows you all the exceptions raised by your application which is very helpful for you. I have uploaded a sample project on github at here. You can find Monitoring.cshtml file on this sample project. You can use this approach in ASP.NET MVC, ASP.NET WebForm and WebMatrix application. Summary: This is very important for administrators/developers to manage and administer their web application after deploying to production server. This article will help administrators/developers to see the memory and CPU usage of their web application. This will also help administrators/developers to see all the exceptions your application is throwing whether they are swallowed or not. Hopefully you will enjoy this article too. SyntaxHighlighter.all()

Read the article

Why does setting a geometry shader cause my sprites to vanish?

- by ChaosDev

My application has multiple screens with different tasks. Once I set a geometry shader to the device context for my custom terrain, it works and I get the desired results. But then when I get back to the main menu, all sprites and text disappear. These sprites don't dissappear when I use pixel and vertex shaders. The sprites are being drawn through D3D11, of course, with specified view and projection matrices as well an input layout, vertex, and pixel shader. I'm trying DeviceContext->ClearState() but it does not help. Any ideas? void gGeometry::DrawIndexedWithCustomEffect(gVertexShader*vs,gPixelShader* ps,gGeometryShader* gs=nullptr) { unsigned int offset = 0; auto context = mp_D3D->mp_Context; //set topology context->IASetPrimitiveTopology(m_Topology); //set input layout context->IASetInputLayout(mp_inputLayout); //set vertex and index buffers context->IASetVertexBuffers(0,1,&mp_VertexBuffer->mp_Buffer,&m_VertexStride,&offset); context->IASetIndexBuffer(mp_IndexBuffer->mp_Buffer,mp_IndexBuffer->m_DXGIFormat,0); //send constant buffers to shaders context->VSSetConstantBuffers(0,vs->m_CBufferCount,vs->m_CRawBuffers.data()); context->PSSetConstantBuffers(0,ps->m_CBufferCount,ps->m_CRawBuffers.data()); if(gs!=nullptr) { context->GSSetConstantBuffers(0,gs->m_CBufferCount,gs->m_CRawBuffers.data()); context->GSSetShader(gs->mp_D3DGeomShader,0,0);//after this call all sprites disappear } //set shaders context->VSSetShader( vs->mp_D3DVertexShader, 0, 0 ); context->PSSetShader( ps->mp_D3DPixelShader, 0, 0 ); //draw context->DrawIndexed(m_indexCount,0,0); } //sprites void gSpriteDrawer::Draw(gTexture2D* texture,const RECT& dest,const RECT& source, const Matrix& spriteMatrix,const float& rotation,Vector2d& position,const Vector2d& origin,const Color& color) { VertexPositionColorTexture* verticesPtr; D3D11_MAPPED_SUBRESOURCE mappedResource; unsigned int TriangleVertexStride = sizeof(VertexPositionColorTexture); unsigned int offset = 0; float halfWidth = ( float )dest.right / 2.0f; float halfHeight = ( float )dest.bottom / 2.0f; float z = 0.1f; int w = texture->Width(); int h = texture->Height(); float tu = (float)source.right/(w); float tv = (float)source.bottom/(h); float hu = (float)source.left/(w); float hv = (float)source.top/(h); Vector2d t0 = Vector2d( hu+tu, hv); Vector2d t1 = Vector2d( hu+tu, hv+tv); Vector2d t2 = Vector2d( hu, hv+tv); Vector2d t3 = Vector2d( hu, hv+tv); Vector2d t4 = Vector2d( hu, hv); Vector2d t5 = Vector2d( hu+tu, hv); float ex=(dest.right/2)+(origin.x); float ey=(dest.bottom/2)+(origin.y); Vector4d v4Color = Vector4d(color.r,color.g,color.b,color.a); VertexPositionColorTexture vertices[] = { { Vector3d( dest.right-ex, -ey, z),v4Color, t0}, { Vector3d( dest.right-ex, dest.bottom-ey , z),v4Color, t1}, { Vector3d( -ex, dest.bottom-ey , z),v4Color, t2}, { Vector3d( -ex, dest.bottom-ey , z),v4Color, t3}, { Vector3d( -ex, -ey , z),v4Color, t4}, { Vector3d( dest.right-ex, -ey , z),v4Color, t5}, }; auto mp_context = mp_D3D->mp_Context; // Lock the vertex buffer so it can be written to. mp_context->Map(mp_vertexBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource); // Get a pointer to the data in the vertex buffer. verticesPtr = (VertexPositionColorTexture*)mappedResource.pData; // Copy the data into the vertex buffer. memcpy(verticesPtr, (void*)vertices, (sizeof(VertexPositionColorTexture) * 6)); // Unlock the vertex buffer. mp_context->Unmap(mp_vertexBuffer, 0); //set vertex shader mp_context->IASetVertexBuffers( 0, 1, &mp_vertexBuffer, &TriangleVertexStride, &offset); //set texture mp_context->PSSetShaderResources( 0, 1, &texture->mp_SRV); //set matrix to shader mp_context->UpdateSubresource(mp_matrixBuffer, 0, 0, &spriteMatrix, 0, 0 ); mp_context->VSSetConstantBuffers( 0, 1, &mp_matrixBuffer); //draw sprite mp_context->Draw( 6, 0 ); }

Read the article

Improve the Quality of ePub eBooks with Sigil

- by Matthew Guay

Would you like to correct errors in your ePub formatted eBooks, or even split them into chapters and create a Table of Contents? Here’s how you can with the free program Sigil. eBooks are increasingly popular with the rise of eBook readers and reading apps on mobile devices. We recently showed you how to convert a PDF eBook to ePub format, but as you may have noticed, sometimes the converted file had some glitches or odd formatting. Additionally, many of the many free ePub books available online from sources like the Project Guttenberg do not include a table of contents. Sigil is a free application for Windows, OS X, and Linux that lets you edit ePub files, so let’s look at how you can use it to improve your eBooks. Note: Sigil took several moments to open files in our tests, and froze momentarily when we maximized the window. Sigil is currently pre-release software in active development, so we would expect the bugs to be worked out in future versions. As usual, only install if you’re comfortable testing pre-release software. Getting Started Download Sigil (link below), making sure to select the correct version for your computer. Run the installer, and select your preferred setup language when prompted. After a moment the installer will appear; setup as normal. Launch Sigil when it’s finished installing. It opens with a default blank ePub file, so you could actually start writing an eBook from scratch right here. Edit Your ePub eBooks Now you’re ready to edit your ePub books. Click Open and browse to the file you want to edit. Now you can double-click any of the HTML or XHTML files on the left sidebar and edit them just like you would in Word. Or you can choose to view it in Code View and edit the actual HTML directly. The sidebar also gives you access to the other parts of the ePub file, such as Images and CSS styles. If your ePub file has a Table of Contents, you can edit it with Sigil as well. Click Tools in the menu bar, and then select TOC Editor. Strangely there is no way to create a new table of contents, but you can remove entries from existing one. Convert TXT Files to ePub Many free eBooks online, especially older, out of copyright titles, are available in plain text format. One problem with these files is that they usually use hard returns at the end of lines, so they don’t reflow to fill your screen efficiently. Sigil can easily convert these files to the more useful ePub format. Open the text file in Sigil, and it will automatically reflow the text and convert it ePub. As you can see in the screenshot below, the text in the eBook does not have hard line-breaks at the end of each line, and will be much more readable on mobile devices. Note that Sigil may take several moments opening the book, and may even become unresponsive while analyzing it. Now you can edit your eBook, split it into chapters, or just save it as is. Either way, make sure to select Save as to save your book as ePub format. Conclusion As mentioned before, Sigil seems to run slow at times, especially when editing large eBooks. But it’s still a nice solution to edit and extend your ePub eBooks, and even convert plain text eBooks to the nicer ePub format. Now you can make your eBooks work just like you want, and read them on your favorite device! If you feel comfortable editing HTML files, check out our article on how to edit ePub eBooks with your favorite HTML editor. Link Download Sigil from Google Code Download free ePub eBooks from Project Guttenberg Similar Articles Productive Geek Tips Edit ePub eBooks with Your Favorite HTML EditorConvert a PDF eBook to ePub Format for Your iPad, iPhone, or eReaderRead Mobi eBooks on Kindle for PCFriday Fun: Watch HD Video Content with MeevidPreview and Purchase Ebooks with Kindle for PC TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician TubeSort: YouTube Playlist Organizer XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account

Read the article

OSB/OSR/OER in One Domain - QName violates loader constraints

- by John Graves

For demos, testing and prototyping, I wanted a single domain which contained three servers:OSB - Oracle Service BusOSR - Oracle Service RegistryOER - Oracle Enterprise Repository These three can work together to help with service governance in an enterprise. When building out the domain, I found errors in the OSR server due to some conflicting classes from the OSB. This wouldn't be an issue if each server was given a unique classpath setting with the node manager, but I was having the node manager use the standard startup scripts. The domain's bin/setDomainEnv.sh script has a large set of extra libraries added for OSB which look like this: if [ "${POST_CLASSPATH}" != "" ] ; then POST_CLASSPATH="${COMMON_COMPONENTS_HOME}/modules/oracle.jrf_11.1.1/jrf.jar${CLASSPATHSEP}${POST_CLASSPATH}" export POST_CLASSPATH else POST_CLASSPATH="${COMMON_COMPONENTS_HOME}/modules/oracle.jrf_11.1.1/jrf.jar" export POST_CLASSPATH fi if [ "${PRE_CLASSPATH}" != "" ] ; then PRE_CLASSPATH="${COMMON_COMPONENTS_HOME}/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar${CLASSPATHSEP}${PRE_CLASSPATH}" export PRE_CLASSPATH else PRE_CLASSPATH="${COMMON_COMPONENTS_HOME}/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar" export PRE_CLASSPATH fi POST_CLASSPATH="${POST_CLASSPATH}${CLASSPATHSEP}/oracle/fmwhome/Oracle_OSB1/soa/modules/oracle.soa.common.adapters_11.1.1/oracle.soa.common.adapters.jar\ ${CLASSPATHSEP}${ALSB_HOME}/lib/version.jar\ ${CLASSPATHSEP}${ALSB_HOME}/lib/alsb.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/lib/j2ssh-ant.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/lib/j2ssh-common.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/lib/j2ssh-core.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/lib/j2ssh-dameon.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/classes${CLASSPATHSEP}\ ${ALSB_HOME}/lib/external/log4j_1.2.8.jar${CLASSPATHSEP}\ ${DOMAIN_HOME}/config/osb" I didn't take the time to sort out exactly which jar was causing the problem, but I simply surrounded this block with a conditional statement: if [ "${SERVER_NAME}" == "osr_server1" ] ; then POST_CLASSPATH=""else if [ "${POST_CLASSPATH}" != "" ] ; then POST_CLASSPATH="${COMMON_COMPONENTS_HOME}/modules/oracle.jrf_11.1.1/jrf.jar${CLASSPATHSEP}${POST_CLASSPATH}" export POST_CLASSPATH else POST_CLASSPATH="${COMMON_COMPONENTS_HOME}/modules/oracle.jrf_11.1.1/jrf.jar" export POST_CLASSPATH fi if [ "${PRE_CLASSPATH}" != "" ] ; then PRE_CLASSPATH="${COMMON_COMPONENTS_HOME}/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar${CLASSPATHSEP}${PRE_CLASSPATH}" export PRE_CLASSPATH else PRE_CLASSPATH="${COMMON_COMPONENTS_HOME}/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar" export PRE_CLASSPATH fi POST_CLASSPATH="${POST_CLASSPATH}${CLASSPATHSEP}/oracle/fmwhome/Oracle_OSB1/soa/modules/oracle.soa.common.adapters_11.1.1/oracle.soa.common.adapters.jar\ ${CLASSPATHSEP}${ALSB_HOME}/lib/version.jar\ ${CLASSPATHSEP}${ALSB_HOME}/lib/alsb.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/lib/j2ssh-ant.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/lib/j2ssh-common.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/lib/j2ssh-core.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/lib/j2ssh-dameon.jar\ ${CLASSPATHSEP}${ALSB_HOME}/3rdparty/classes${CLASSPATHSEP}\ ${ALSB_HOME}/lib/external/log4j_1.2.8.jar${CLASSPATHSEP}\ ${DOMAIN_HOME}/config/osb" fi I could have also just done an if [ ${SERVER_NAME} = "osb_server1" ], but I would have also had to include the AdminServer because they are needed there too. Since the oer_server1 didn't mind, I did the negative case as shown above. To help others find this post, I'm including the error that was reported in the OSR server before I made this change. ####<Mar 30, 2012 4:20:28 PM EST> <Error> <HTTP> <localhost.localdomain> <osr_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <11d1def534ea1be0:30e96542:13662023753:-8000-000000000000001c> <1333084828916> <BEA-101017> <[ServletContext@470316600[app:registry module:registry.war path:/registry spec-version:null]] Root cause of ServletException. java.lang.LinkageError: Class javax/xml/namespace/QName violates loader constraints at com.idoox.wsdl.extensions.PopulatedExtensionRegistry.<init>(PopulatedExtensionRegistry.java:84) at com.idoox.wsdl.factory.WSDLFactoryImpl.newDefinition(WSDLFactoryImpl.java:61) at com.idoox.wsdl.xml.WSDLReaderImpl.parseDefinitions(WSDLReaderImpl.java:419) at com.idoox.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:309) at com.idoox.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:272) at com.idoox.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:198) at com.idoox.wsdl.util.WSDLUtil.readWSDL(WSDLUtil.java:126) at com.systinet.wasp.admin.PackageRepositoryImpl.validateServicesNamespaceAndName(PackageRepositoryImpl.java:885) at com.systinet.wasp.admin.PackageRepositoryImpl.registerPackage(PackageRepositoryImpl.java:807) at com.systinet.wasp.admin.PackageRepositoryImpl.updateDir(PackageRepositoryImpl.java:611) at com.systinet.wasp.admin.PackageRepositoryImpl.updateDir(PackageRepositoryImpl.java:643) at com.systinet.wasp.admin.PackageRepositoryImpl.update(PackageRepositoryImpl.java:553) at com.systinet.wasp.admin.PackageRepositoryImpl.init(PackageRepositoryImpl.java:242) at com.idoox.wasp.ModuleRepository.loadModules(ModuleRepository.java:198) at com.systinet.wasp.WaspImpl.boot(WaspImpl.java:383) at org.systinet.wasp.Wasp.init(Wasp.java:151) at com.systinet.transport.servlet.server.Servlet.init(Unknown Source) at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64) at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58) at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48) at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:244) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:184) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3732) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

Read the article

JavaOne pictures and Community Commentary on JCP Awards

- by heathervc

We posted some pictures from JCP related events at JavaOne 2012 on the JCP Facebook page today. The 2012 JCP Program Award winners and some of the nominees responded to the community recognition of their achievements during some of the JCP events last week. “Our job on the EC is to balance the need of innovation – so we don’t standardize too early, or too late. We try to find that sweet spot that makes innovation and standardization work together, and not against each other.”- Ben Evans, CEO of jClarity and Executive Committee (EC) representative of the London Java Community, 2012 JCP Member/Participant of the Year Winner“SouJava has been evangelizing the Java platform, promoting the Java ecosystem in Brazil, and contributing to JSRs for several years. It’s very gratifying to have our work recognized, on behalf of many developers and Java User Groups around the world. This really is the work of a large group of people, represented by the few that can be here tonight.”- Michael Santos, representative of SouJava, 2012 JCP Member/Participant of the Year Winner "In the last years Credit Suisse has contributed to the development of Java EE specifications through participation in many customer advisory boards, through statements of requirements for extensions to the core Java related products in use, and active participation in JSRs. Winning the JCP Outstanding Spec Lead Award 2012 is very encouraging for our engagement and also demonstrates the level of expertise and commitment to drive the evolution of Java. Victor Grazi is happy and honored to receive this award." - Susanne Cech Previtali, Executive Committee (EC) representative of Credit Suisse, accepting award for 2012 JCP Outstanding Spec Lead Winner "Managing a JSR is difficult. There are so many decisions to be made and so many good and varied opinions, you never really know if you have decided correctly. The key to success is transparency and collaboration. I am truly humbled by receiving this award, there are so many other active JSRs.” Victor added that going forward in the JCP EC, they would like to simplify and open the process of participation – being addressed in the JCP.Next initiative of the JCP EC. "We would also like to encourage the engagement of universities, professors and students – as an important part of the Java community. While innovation is the lifeblood of our community and industry, without strong standards and compatibility requirements, we all end up in a maze of technology where everything is slightly different and doesn’t quite work with everything else." Victo Grazi, Executive Committee (EC) representative of Credit Suisse, 2012 JCP Outstanding Spec Lead Winner“I am very pleased, of course, to accept this award, but the credit really should go to all of those who have participated in the work of the JCP, while pushing for changes in the way it operates. JCP.Next represents three JSRs. The first two are done, but the final step, JSR 358, is the complicated one, and it will bring in the lawyers. Just to give you an idea of what we’re dealing with, it affects licensing, intellectual property, patents, implementations not based on the Reference Implementation (RI), the role of the RI, compatibility policy, possible changes to the Technical Compatibility Kit (TCK), transparency, where do individuals fit in, open source, and more.”- Patrick Curran, JCP Chair, Spec Lead on JCP.Next JSRs (JSR 348, JSR 355 and JSR 358), 2012 JCP Most Significant JSR Winner“I’m especially glad to see the JCP community recognize JCP.Next for its importance. The governance work it represents is KEY to moving the Java platform forward and the success of the technology.”- John Rizzo, Executive Committee (EC) representative of Aplix Corporation, JSR Expert Group Member “I am deeply honored to be nominated. I had the privilege to receive two awards on behalf of Expert Groups and Spec Leads two years ago. But this time, I am nominated personally, which values my own contribution to the JCP, and of course, participation in JSRs and the EC work. I’m a fan of Agile Principles and Values Working. Being an Agile Coach and Consultant, I use it for some of the biggest EC Member companies and projects. It fuels my ability to help the JCP become more agile, lean and transparent as part of the JCP.Next effort.” - Werner Keil, Individual Executive Committee (EC) Member, a 2012 JCP Member/Participant of the Year Nominee, JSR Expert Group Member“The JCP ever has been some kind of institution for me,” Markus said. “If in technical doubt, I go there, look for the specifications of the implementation I work with at the moment and verify what I had observed. Since the beginning of my Java journey more than 12 years back now, I always had a strong relationship with the JCP. Shaping the future of a technology by joining the JCP – giving feedback and contributing to the road ahead through individual JSRs – that brings you to a whole new level.”Calling himself, “the new kid on the block,” he explained that for years he was afraid to join the JCP and contribute. But in reality, “Every single one of the big names I meet from the different Expert Groups is a nice person. People you can actually work with,” he says. “And nobody blames you for things you don't know. As long as you are committed and bring what is worth the most: passion, experiences and the desire to make a difference.” - Markus Eisele, a 2012 JCP Member of the Year Nominee, JSR Expert Group MemberCongratulations again to all of the nominees and winners of the JCP Program Awards. Next year, we will add another award for the group of JUG members (not an entire JUG) that makes the best contribution to the Adopt-a-JSR program. Let us know if you have other suggestions or improvements.

Read the article

XNA Notes 005

- by George Clingerman

Another week and another crazy amount of activity going on in the XNA community. I’m fairly certain I missed over half of it. In fact, if I am missing things, make sure to email me and I’ll try and make sure I catch it next week! ([email protected]). Also, if you’ve got any advice, things you like/don’t like about the way these XNA Notes are going let me know. I always appreciate feedback (currently spammers are leaving me the nicest comments so you guys have work to do!) Without further ado, here’s this week’s notes! Time Critical XNA News The XNA Team Blob reminds us that February 7th is the last day to submit XNA 3.1 games to peer review! http://blogs.msdn.com/b/xna/archive/2011/01/31/7-days-left-to-submit-xna-gs-3-1-games-on-app-hub.aspx XNA MVPS Chris Williams kicks off the marketing campaign for our book http://geekswithblogs.net/cwilliams/archive/2011/01/28/143680.aspx Catalin Zima posts the comparison cheat sheet for why Angry Birds is different than Chickens Can’t Fly http://www.amusedsloth.com/2011/02/comparison-cheat-sheet-for-chickens-cant-fly-and-angry-birds/ Jim Perry congratulates the developers selected by Game Developer Magazine for Best Xbox LIVE Indie Games of 2010 http://machxgames.com/blog/?p=24 @NemoKrad posts his XNAKUUG talks for all to enjoy http://twitter.com/NemoKrad/statuses/33142362502864896 http://xna-uk.net/blogs/randomchaos/archive/2011/02/03/xblig-uk-2011-january-amp-february-talk.aspx George (that’s me!) preps for his XNA talk coming up on the 8th http://twitter.com/clingermangw/statuses/32669550554124288 http://www.portlandsilverlight.net/Meetings/Details/15 XNA Developers FireFly posts the last tutorial in his XNA Tower Defense tutorial series http://forums.create.msdn.com/forums/p/26442/451460.aspx#451460 http://xnatd.blogspot.com/2011/01/tutorial-14-polishing-game.html @fredericmy posts the main difference when porting a game from Windows Phone 7 to Xbox 360 http://fairyengine.blogspot.com/2011/01/main-differences-when-porting-game-from.html @ElementCy creates a pretty rad video of a MineCraft type terrain created using XNA http://www.youtube.com/watch?v=Waw1f7wnl9I Andrew Russel gets the first XNA badge on gamedev.stackexchange http://twitter.com/_AndrewRussell/statuses/32322877004972032 http://gamedev.stackexchange.com/badges?tab=tags And his funding for ExEn has passed $7000 only $3000 to go http://twitter.com/_AndrewRussell/statuses/33042412804771840 Subodh Pushpak blogs about his Windows Phone 7 XNA talk http://geekswithblogs.net/subodhnpushpak/archive/2011/02/01/windows-phone-7-silverlight--xna-development-talk.aspx Slyprid releases the latest version of Transmute and needs more people to test http://twitter.com/slyprid/statuses/32452488418299904 http://forgottenstarstudios.com/ SpynDoctorGames celebrates the 1 year anniversary of Your Doodles Are Bugged! Congrats! http://twitter.com/SpynDoctorGames/statuses/32511689068908544 Noogy (creator of Dust the Elysian Tail) prepares his conversion to XNA 4.0 http://twitter.com/NoogyTweet/statuses/32522008449253376 @philippedasilva posts about the Indiefreaks Game Framework v0.2.0.0 Input management system http://twitter.com/philippedasilva/statuses/32763393957957632 http://indiefreaks.com/2011/02/02/behind-smart-input-system-feature/ Mommy’s Best Games debates what to do about High Scores with their new update http://mommysbest.blogspot.com/2011/02/high-score-shake-up.html @BinaryTweedDeej want to know if there’s anything the community needs to make XNA games for the PC. Give him some feedback! http://twitter.com/BinaryTweedDeej/status/32895453863354368 @mikebmcl promises to write us all a book (I can’t wait to read it!) http://twitter.com/mikebmcl/statuses/33206499102687233 @werezompire is going to live, LIVE, thanks to all the generosity and support from the community! http://twitter.com/werezompire/statuses/32840147644977153 Xbox LIVE Indie Games (XBLIG) Making money in Xbox 360 indie game development. Is it possible? http://www.bitmob.com/articles/making-money-in-xbox-360-indie-game-development-is-it-possible @AlejandroDaJ posts some thoughts abut the bitmob article http://twitter.com/AlejandroDaJ/statuses/31068552165330944 http://www.apathyworks.com/blog/view.php?id=00215 Kobun gets my respect as an XBLIG champion. I’m not sure who Kobun is, but if you’ve every read through the comment sections any time Kotaku writes about XBLIGs you’ll see a lot of confusion, disinformation in there. Kobun has been waging a secret war battling that lack of knowledge and he does it well. Also he’s running a pretty kick ass site for Xbox LIVE Indie Game reviews http://xboxindies.teamkobun.com/ @radiangames releases his last Xbox LIVE Indie Game...for now http://bit.ly/gMK6lE Playing Avaglide with the Kinect controller http://www.youtube.com/watch?v=UqAYbHww53o http://www.joystiq.com/2011/01/30/kinect-hacks-take-to-the-skies-with-avaglide/ Luke Schneider of Radiangames interviewed in Edge magazine http://www.next-gen.biz/features/radiangames-venture Digital Quarters posts thoughts on why XBLIG’s online requirement kills certain genres http://digitalquarters.blogspot.com/2011/02/thoughts-why-xbligs-online-requirement.html Mommy’s Best Games shares the news that several XBLIGs were featured in the March 2011 issue of Famitsu 360 http://forums.create.msdn.com/forums/p/33455/451487.aspx#451487 NaviFairy continues with his Indie-Game-A-Day http://gaygamer.net/2011/02/indie_game_a_day_epic_dungeon.html http://gaygamer.net/2011/02/indie_game_a_day_break_limit_r.html and more every day...that’s kind of the point! Keep your eye on this series! VVGTV continues with it’s awesome reviews/promotions for XBLIGs http://vvgtv.com/ http://vvgtv.com/2011/02/03/iredia-atrams-secret-xblig-review-2/ http://vvgtv.com/2011/02/02/poopocalypse-coming-soon-to-xblig/ ….and even more, you get the point. Magicka is an Indie Game doing really well on Steam AND it’s made using XNA http://www.magickagame.com/ http://twitter.com/Magickagame/statuses/32712762580799488 GameMarx reviews Antipole http://www.gamemarx.com/reviews/73/antipole-is-vvvvvvery-good.aspx Armless Octopus review Alpha Squad http://www.armlessoctopus.com/2011/01/28/xbox-indie-review-alpha-squad/ An interesting article about Kodu that Jim Perry found http://twitter.com/MachXGames/statuses/32848044105924608 http://www.develop-online.net/news/36915/10-year-old-Jordan-makes-games-The-UK-needs-more-like-her XNA Game Development Sgt. Conker posts about the Natur beta, a new book and whether you can make money with XBLIG http://www.sgtconker.com/ http://www.sgtconker.com/2011/01/a-new-book-on-the-block-and-a-new-natur-beta/ http://www.sgtconker.com/2011/01/making-money-in-xbox-360-indie-game-development-is-it-possible/ Tips for setting up SVN http://bit.ly/fKxgFh @bsimser found tons of royalty free music and soundfx for your XNA Games http://twitter.com/bsimser/statuses/31426632933711872 Post on the new features in the next Sunburn Editor http://www.synapsegaming.com/blogs/fivesidedbarrel/archive/2011/01/28/new-editor-features-prefabs-components-and-more.aspx @jasons_novaleaf posts source code for light pre-pass optimizations for #xna http://twitter.com/jasons_novaleaf/statuses/33348855403642880 http://jcoluna.wordpress.com/2011/02/01/xna-4-0-light-pre-pass-optimization-round-one/ I’ve been learning about doing an A.I. for turn based games and this article was a great resource. http://www.gamasutra.com/view/feature/1535/designing_ai_algorithms_for_.php?print=1

Read the article

Five Reasons to Attend PLM Summit 2013: The Conference Formerly Known as AGILITY

- by Terri Hiskey

As we approach the end of 2012, we are also closing in on the last couple of weeks that Agile customers and prospects can register for the upcoming PLM Summit 2013 for the bargain early bird rate of $195. Register now to secure your spot! The Conference Formerly Known as AGILITY... Long-time Agile customers may remember AGILITY, which was Agile's PLM customer conference that was held on an annual basis prior to Oracle's acquisiton of Agile in 2007. In February 2012, due to feedback we received from our Agile PLM community, we successfully resurrected the AGILITY conference and renamed it the PLM Summit. The PLM Summit was so well received and well-attended, that we are doing it again in 2013. This upcoming PLM Summit is being co-located in San Francisco under the overarching banner of the Oracle Value Chain Summit, and will be held alongside several other Oracle customer conferences that cover a range of value chain solutions, including Value Chain Planning, Value Chain Execution, Procurement, Maintenance and Manufacturing. This setup offers PLM attendees the best of all worlds--the opportunity to participate and learn about PLM in smaller, focused sessions by product and by industry, while also giving attendees the chance to see how PLM works together with other critical enterprise applications that address other important aspects of the value chain. Top Five Reasons to Attend the PLM Summit 2013 In the spirit of all of the end-of-the-year lists that are currently popping up, here is a list of the top five reasons to attend the PLM Summit for anyone out there needs a little extra encouragement to register: 1. The Best Opportunities for Customer Networking The PLM Summit offers attendees numerous opportunities to learn and network with fellow Agile users. Customer stories are featured in keynote and breakout presentations and the schedule allows for plenty of networking time during breakfasts, lunches, breaks and dinners. Customer networking is the number one reason that Agile users attend the PLM Summit. Read what attendees thought of the most recent PLM Summit: "Hearing about the implementation of Agile products from a customers’ perspective is invaluable." - Director of Quality Assurance & Regulatory Affairs, leading medical device manufacturer "Understanding the scope of other companies’ projects and the lessons learned made attending this event well worth my time." - Director of Test Engineering, global industrial manufacturer "The most beneficial thing about attending this event is the opportunity to network with other customers with similar experiences." - Director of Business Process Improvement, leading high technology company Come to the PLM Summit and play an active role within the PLM community: swap war stories and business cards, connect on LinkedIn and Facebook, share your stories and discuss the sessions from each day. Register now! 2. It's Educational! The PLM Summit is the premier educational event for anyone in the Agile PLM community. There are nearly 40 PLM-focused in-depth educational sessions led by Agile PLM experts, customers and partners that will cover a range of specific product and industry-focused topics. Keynotes will give attendees a broad overview of the entire Agile PLM footprint, while sessions will delve deeply into specific product functionality and customer case studies. There is truly something for everyone. Check out the latest agenda for view of all the sessions. 3. Visit with the PLM Partner Community Our partners play a significant and important role within the Agile PLM community. At the PLM Summit, attendees will be able to meet and mingle with several of the top Oracle Agile PLM partners including: Deloitte, Domain, GoEngineer, Hitachi Consulting, IBM, Kalypso, KPIT Cummins (CPG Solutions), Perception Software, Verdant, Xavor and ZeroWaitState. Go here for a complete list of all the Value Chain Summit sponsors. 4. See Agile PLM in Action at our Dedicated PLM Demo Pods At the PLM Summit, attendees will have the chance to see Agile PLM in action at dedicated PLM demo pods, manned by expert members of our Agile PLM team. If you would like to see up close specific Agile PLM functionality, or if you have a question on how to extend the scope of your current implemention or if you want a better understanding of how to leverage Agile PLM to address specific use-cases, stop by one of the Agile PLM demo pods and engage the Agile PLM experts on hand at the PLM Summit. 5. Spend Some Time in Lovely San Francisco Still on the fence about the upcoming PLM Summit? Remember that it is being held in San Francisco, which is a fantastic city for a getaway. After spending time learning and networking about PLM, take an extra day or two to escape the dreary winter and enjoy the beautiful scenery and the unique actitivies offered only by the City by the Bay. You will walk away from the conference not only with renewed excitement about Agile PLM, but feeling rejuvenated in general.

Read the article

Exitus Acta Probat: The Post-Processing Module

- by Phil Factor

Sometimes, one has to make certain ethical compromises to ensure the success of a corporate IT project. Exitus Acta Probat (literally 'the result validates the deeds' meaning that the ends justify the means)It was a while back, whilst working as a Technical Architect for a well-known international company, that I was given the task of designing the architecture of a rather specialized accounting system. We'd tried an off-the-shelf (OTS) Windows-based solution which crashed with dispiriting regularity, and didn't quite do what the business required. After a great deal of research and planning, we commissioned a Unux-based system that used X-terminals for the desktops of the participating staff. X terminals are now obsolete, but were then hot stuff; stripped-down Unix workstations that provided client GUIs for networked applications long before the days of AJAX, Flash, Air and DHTML. I've never known a project go so smoothly: I'd been initially rather nervous about going the Unix route, believing then that Unix programmers were excitable creatures who were prone to indulge in role-play enactments of elves and wizards at the weekend, but the programmers I met from the company that did the work seemed to be rather donnish, earnest, people who quickly grasped our requirements and were faultlessly professional in their work.After thinking lofty thoughts for a while, there was considerable pummeling of keyboards by our suppliers, and a beautiful robust application was delivered to us ahead of dates.Soon, the department who had commissioned the work received shiny new X Terminals to replace their rather depressing lavatory-beige PCs. I modestly hung around as the application was commissioned and deployed to the department in order to receive the plaudits. They didn't come. Something was very wrong with the project. I couldn't put my finger on the problem, and the users weren't doing any more than desperately and futilely searching the application to find a fault with it.Many times in my life, I've come up against a predicament like this: The roll-out of an application goes wrong and you are hearing nothing that helps you to discern the cause but nit-*** noise. There is a limit to the emotional heat you can pack into a complaint about text being in the wrong font, or an input form being slightly cramped, but they tried their best. The answer is, of course, one that every IT executive should have tattooed prominently where they can read it in emergencies: In Vino Veritas (literally, 'in wine the truth', alcohol loosens the tongue. A roman proverb) It was time to slap the wallet and get the department down the pub with the tab in my name. It was an eye-watering investment, but hedged with an over-confident IT director who relished my discomfort. To cut a long story short, The real reason gushed out with the third round. We had deprived them of their PCs, which had been good for very little from the pure business perspective, but had provided them with many hours of happiness playing computer-based minesweeper and solitaire. There is no more agreeable way of passing away the interminable hours of wage-slavery than minesweeper or solitaire, and the employees had applauded the munificence of their employer who had provided them with the means to play it. I had, unthinkingly, deprived them of it.I held an emergency meeting with our suppliers the following day. I came over big with the notion that it was in their interests to provide a solution. They played it cool, probably knowing that it was my head on the block, not theirs. In the end, they came up with a compromise. they would temporarily descend from their lofty, cerebral stamping grounds in order to write a server-based Minesweeper and Solitaire game for X Terminals, and install it in a concealed place within the system. We'd have to pay for it, though. I groaned. How could we do that? "Could we call it a 'post-processing module?" suggested their account executive.And so it came to pass. The application was a resounding success. Every now and then, the staff were able to indulge in some 'post-processing', with what turned out to be a very fine implementation of both minesweeper and solitaire. There were several refinements: A single click in a 'boss' button turned the games into what looked just like a financial spreadsheet. They even threw in a multi-user version of Battleships. The extra payment for the post-processing module went through the change-control process without anyone untoward noticing, and peace once more descended. Only one thing niggles. Those games were good. Do they still survive, somewhere in a Linux library? If so, I'd like to claim a small part in their production.

Read the article

Invalid Opcode 0000

- by Mr47

At random times (usually when watching a movie in XBMC), the computer locks up. I can still sometimes SSH in and get the 'dmesg' output before that locks up too. A hard reboot is usually required to get things going again. I have cut out the date/time/server columns for easier reading, please do ask if these seem relevant omissions... System: Ubuntu 11.04 (2.6.38-8-server) x64 X11 installed with IceWm (and XBMC) Core 2 Duo E8400 @ 3.00GHz 8 GB RAM Asus P5Q premium motherboard Primary harddrive: OCZ Vertex 2 60 GB (SSD) Other harddrives: various 750GB, 1TB, 1.5TB & 2TB (WD & samsung) Any important information I am not supplying is purely a sign of my incompetence in these matters, so please do ask and excuse me for my inabilities... invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_map CPU 0 Modules linked in: parport_pc ppdev vesafb snd_hda_codec_analog tuner_simple tuner_types wm8775 tda9887 tda8290 tea5767 tuner cx25840 ir_lirc_codec lirc_dev snd_hda_intel snd_hda_codec snd_hwdep snd_pcm ir_sony_decoder snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq rc_rc6_mce ivtv ir_jvc_decoder cx2341x i2c_algo_bit v4l2_common mceusb videodev ir_rc6_decoder ir_rc5_decoder snd_timer ir_nec_decoder nvidia(P) btusb bluetooth rc_core v4l2_compat_ioctl32 tveeprom snd_seq_device pata_marvell psmouse shpchp serio_raw snd asus_atk0110 soundcore snd_page_alloc lp parport firewire_ohci firewire_core crc_itu_t r8169 sky2 ahci libahci Pid: 4597, comm: xbmc.bin Tainted: P 2.6.38-8-server #42-Ubuntu System manufacturer P5Q Premium/P5Q Premium RIP: 0010:[<ffffffff8119bc4a>] [<ffffffff8119bc4a>] do_mpage_readpage+0x9a/0x510 RSP: 0018:ffff88021f5a59d8 EFLAGS: 00210246 RAX: 0000000000000020 RBX: ffff88021f5a5ac8 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000015e36fe0 RDI: 0000000000000000 RBP: ffff88021f5a5a98 R08: ffff88021f5a5ac8 R09: ffff88021f5a5b38 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 000000000000b148 R14: 0000000000000001 R15: ffff8802067034b8 FS: 00007f3f34eb1700(0000) GS:ffff8800cfc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007feb8d515000 CR3: 000000021d744000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process xbmc.bin (pid: 4597, threadinfo ffff88021f5a4000, task ffff88021f63db80) Stack: ffff88021f5a5a28 ffffffff8116019d ffff88021f5a5b40 0000002000000003 ffff88021f5a5b38 ffff880206703370 ffffea0006d800f8 0000000000000000 ffffea0006d800f8 0000000c811270b5 ffff88021f5a5a68 ffffffff8110bdba Call Trace: [<ffffffff8116019d>] ? mem_cgroup_cache_charge+0xed/0x130 [<ffffffff8110bdba>] ? add_to_page_cache_locked+0xea/0x160 [<ffffffff8119c232>] mpage_readpages+0x102/0x150 [<ffffffff812063e0>] ? ext4_get_block+0x0/0x20 [<ffffffff812063e0>] ? ext4_get_block+0x0/0x20 [<ffffffff81149475>] ? alloc_pages_current+0xa5/0x110 [<ffffffff8120157d>] ext4_readpages+0x1d/0x20 [<ffffffff81116a9b>] __do_page_cache_readahead+0x14b/0x220 [<ffffffff81116ed1>] ra_submit+0x21/0x30 [<ffffffff81116ff5>] ondemand_readahead+0x115/0x230 [<ffffffff811171a0>] page_cache_async_readahead+0x90/0xc0 [<ffffffff8110b184>] ? file_read_actor+0xd4/0x170 [<ffffffff812de72e>] ? radix_tree_lookup_slot+0xe/0x10 [<ffffffff8110c521>] do_generic_file_read.clone.23+0x271/0x450 [<ffffffff8110d1ba>] generic_file_aio_read+0x1ca/0x240 [<ffffffff8100a82e>] ? __switch_to+0x20e/0x2f0 [<ffffffff81164c82>] do_sync_read+0xd2/0x110 [<ffffffff8108b61c>] ? hrtimer_try_to_cancel+0x4c/0xe0 [<ffffffff81279083>] ? security_file_permission+0x93/0xb0 [<ffffffff81164fa1>] ? rw_verify_area+0x61/0xf0 [<ffffffff81165463>] vfs_read+0xc3/0x180 [<ffffffff81165571>] sys_read+0x51/0x90 [<ffffffff8100bfc2>] system_call_fastpath+0x16/0x1b Code: ff ff 48 c7 85 78 ff ff ff 00 00 00 00 49 d3 ee b9 0c 00 00 00 2b 4d 8c 48 8b b2 c8 00 00 00 ba 01 00 00 00 41 0f af c6 49 d3 e5 <0f> 36 4d 8c 4c 01 e8 d3 e2 4c 8d 44 16 ff 48 8b 53 20 49 d3 f8 RIP [<ffffffff8119bc4a>] do_mpage_readpage+0x9a/0x510 RSP <ffff88021f5a59d8> ---[ end trace ac6cd2f4692205a3 ]--- Please note that the error is ALWAYS occuring at do_mpage_readpage+0x9a/0x510 with the same numbers after it. I've tried to come up with the possible meaning of these, but couldn't get any further. I've also noticed that the top block from the call trace is always the following with the exact same numbers: [<ffffffff8116019d>] ? mem_cgroup_cache_charge+0xed/0x130 [<ffffffff8110bdba>] ? add_to_page_cache_locked+0xea/0x160 [<ffffffff8119c232>] mpage_readpages+0x102/0x150 [<ffffffff812063e0>] ? ext4_get_block+0x0/0x20 [<ffffffff812063e0>] ? ext4_get_block+0x0/0x20 Could this indicate a hard drive issue, a RAM issue or something else entirely?

Search Results

Search found 16894 results on 676 pages for 'block device'.

Page 622/676 | < Previous Page | 618 619 620 621 622 623 624 625 626 627 628 629 | Next Page >

- by Trevor Bekolay

- by Chris Hoffman

- by MarkPearl

- by Kate Moss' Open Space

- by Somnambulist

- by Rick Strahl

- by Shawn Cicoria

- by mbcrump

- by ola karlsson

- by jehan

- by uvasal

- by Chris Hoffman

- by Chris Hoffman

- by Peter

- by dotneteer

- by tomas.nilsson

- by imran_ku07

- by ChaosDev

- by Matthew Guay

- by John Graves

- by heathervc

- by George Clingerman

- by Terri Hiskey

- by Phil Factor

- by Mr47

< Previous Page | 618 619 620 621 622 623 624 625 626 627 628 629 | Next Page >