Search Results

Search found 127626 results on 5106 pages for 'http status code 408'.

Page 622/5106 | < Previous Page | 618 619 620 621 622 623 624 625 626 627 628 629  | Next Page >

• openvpn TCP/UDP slow SSH/SMB performance

  - by Petr Latal

  I have question about strange behavior of my openVPN configuration on Debian lenny. I have 2 server configs (one proto tcp-server based and one proto udp based). ISP bandwidth is 7Mbit/7Mbit. When I uses proto tcp-server my download server rate is fine around 6,4 Mbit/s, but upload rate is about 3Mbit/s. When I uses proto udp, my download server rate is around 3Mbit/s and upload rate around 6,4Mbit/s. I tried to handle the MTU, MSSFIX and cipher on/off on server and client configs to synchronize rates, but without solution. Here is TCP based SERVER config: mode server tls-server port 1194 proto tcp-server dev tap0 ifconfig 11.10.15.1 255.255.255.0 ifconfig-pool 11.10.15.2 11.10.15.20 255.255.255.0 push "route 192.168.1.0 255.255.255.0" push "dhcp-option DNS 192.168.1.200" push "route-gateway 11.10.15.1" push "dhcp-option WINS 192.168.1.200" route-up /etc/openvpn/routeup.sh duplicate-cn ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh2048.pem log-append /var/log/openvpn.log status /var/run/vpn.status 10 user nobody group nogroup keepalive 10 120 comp-lzo verb 3 script-security 3 plugin /usr/lib/openvpn/openvpn-auth-pam.so system-auth persist-tun persist-key mssfix cipher BF-CBC Here is UDP based SERVER config: port 1194 proto udp dev tun0 local xx.xx.xx.xx server 11.10.15.0 255.255.255.0 ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh2048.pem log-append /var/log/openvpn.log status /var/run/vpn.status 10 user nobody group nogroup keepalive 10 120 comp-lzo verb 3 duplicate-cn script-security 3 plugin /usr/lib/openvpn/openvpn-auth-pam.so system-auth persist-tun persist-key tun-mtu 1500 mssfix 1212 client-to-client ifconfig-pool-persist ipp.txt Here is TCP/UDP based windows CLIENT config: remote xx.xx.xx.xx --socket-flags TCP_NODELAY tls-client port 1194 proto tcp-client #proto udp dev tap #dev tun pull ca ca.crt cert latis.crt key latis.key mute 0 comp-lzo adaptive verb 3 resolv-retry infinite nobind persist-key auth-user-pass auth-nocache script-security 2 mssfix cipher BF-CBC

  Read the article

• Cisco 891w multiple VLAN configuration

  - by Jessica

  I'm having trouble getting my guest network up. I have VLAN 1 that contains all our network resources (servers, desktops, printers, etc). I have the wireless configured to use VLAN1 but authenticate with wpa2 enterprise. The guest network I just wanted to be open or configured with a simple WPA2 personal password on it's own VLAN2. I've looked at tons of documentation and it should be working but I can't even authenticate on the guest network! I've posted this on cisco's support forum a week ago but no one has really responded. I could really use some help. So if anyone could take a look at the configurations I posted and steer me in the right direction I would be extremely grateful. Thank you! version 15.0 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ESI ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings ! aaa new-model ! ! aaa authentication login userauthen local aaa authorization network groupauthor local ! ! ! ! ! aaa session-id common ! ! ! clock timezone EST -5 clock summer-time EDT recurring service-module wlan-ap 0 bootimage autonomous ! crypto pki trustpoint TP-self-signed-3369945891 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-3369945891 revocation-check none rsakeypair TP-self-signed-3369945891 ! ! crypto pki certificate chain TP-self-signed-3369945891 certificate self-signed 01 (cert is here) quit ip source-route ! ! ip dhcp excluded-address 192.168.1.1 ip dhcp excluded-address 192.168.1.5 ip dhcp excluded-address 192.168.1.2 ip dhcp excluded-address 192.168.1.200 192.168.1.210 ip dhcp excluded-address 192.168.1.6 ip dhcp excluded-address 192.168.1.8 ip dhcp excluded-address 192.168.3.1 ! ip dhcp pool ccp-pool import all network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 10.171.12.5 10.171.12.37 lease 0 2 ! ip dhcp pool guest import all network 192.168.3.0 255.255.255.0 default-router 192.168.3.1 dns-server 10.171.12.5 10.171.12.37 ! ! ip cef no ip domain lookup no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO891W-AGN-A-K9 sn FTX153085WL ! ! username ESIadmin privilege 15 secret 5 $1$g1..$JSZ0qxljZAgJJIk/anDu51 username user1 password 0 pass ! ! ! class-map type inspect match-any ccp-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-all ccp-insp-traffic match class-map ccp-cls-insp-traffic class-map type inspect match-any ccp-cls-icmp-access match protocol icmp class-map type inspect match-all ccp-invalid-src match access-group 100 class-map type inspect match-all ccp-icmp-access match class-map ccp-cls-icmp-access class-map type inspect match-all ccp-protocol-http match protocol http ! ! policy-map type inspect ccp-permit-icmpreply class type inspect ccp-icmp-access inspect class class-default pass policy-map type inspect ccp-inspect class type inspect ccp-invalid-src drop log class type inspect ccp-protocol-http inspect class type inspect ccp-insp-traffic inspect class class-default drop policy-map type inspect ccp-permit class class-default drop ! zone security out-zone zone security in-zone zone-pair security ccp-zp-self-out source self destination out-zone service-policy type inspect ccp-permit-icmpreply zone-pair security ccp-zp-in-out source in-zone destination out-zone service-policy type inspect ccp-inspect zone-pair security ccp-zp-out-self source out-zone destination self service-policy type inspect ccp-permit ! ! crypto isakmp policy 1 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group 3000client key 67Nif8LLmqP_ dns 10.171.12.37 10.171.12.5 pool dynpool acl 101 ! ! crypto ipsec transform-set myset esp-3des esp-sha-hmac ! crypto dynamic-map dynmap 10 set transform-set myset ! ! crypto map clientmap client authentication list userauthen crypto map clientmap isakmp authorization list groupauthor crypto map clientmap client configuration address initiate crypto map clientmap client configuration address respond crypto map clientmap 10 ipsec-isakmp dynamic dynmap ! ! ! ! ! interface FastEthernet0 ! ! interface FastEthernet1 ! ! interface FastEthernet2 ! ! interface FastEthernet3 ! ! interface FastEthernet4 ! ! interface FastEthernet5 ! ! interface FastEthernet6 ! ! interface FastEthernet7 ! ! interface FastEthernet8 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto ! ! interface GigabitEthernet0 description $FW_OUTSIDE$$ES_WAN$ ip address 10...* 255.255.254.0 ip nat outside ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto map clientmap ! ! interface wlan-ap0 description Service module interface to manage the embedded AP ip unnumbered Vlan1 arp timeout 0 ! ! interface Wlan-GigabitEthernet0 description Internal switch interface connecting to the embedded AP switchport trunk allowed vlan 1-3,1002-1005 switchport mode trunk ! ! interface Vlan1 description $ETH-SW-LAUNCH$$INTF-INFO-FE 1$$FW_INSIDE$ ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly zone-member security in-zone ip tcp adjust-mss 1452 crypto map clientmap ! ! interface Vlan2 description guest ip address 192.168.3.1 255.255.255.0 ip access-group 120 in ip nat inside ip virtual-reassembly zone-member security in-zone ! ! interface Async1 no ip address encapsulation slip ! ! ip local pool dynpool 192.168.1.200 192.168.1.210 ip forward-protocol nd ip http server ip http access-class 23 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! ip dns server ip nat inside source list 23 interface GigabitEthernet0 overload ip route 0.0.0.0 0.0.0.0 10.165.0.1 ! access-list 23 permit 192.168.1.0 0.0.0.255 access-list 100 remark CCP_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 10.165.0.0 0.0.1.255 any access-list 110 permit ip 192.168.0.0 0.0.5.255 any access-list 120 remark ESIGuest Restriction no cdp run ! ! ! ! ! ! control-plane ! ! alias exec dot11radio service-module wlan-ap 0 session Access point version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ESIRouter ! no logging console enable secret 5 $1$yEH5$CxI5.9ypCBa6kXrUnSuvp1 ! aaa new-model ! ! aaa group server radius rad_eap server 192.168.1.5 auth-port 1812 acct-port 1813 ! aaa group server radius rad_acct server 192.168.1.5 auth-port 1812 acct-port 1813 ! aaa authentication login eap_methods group rad_eap aaa authentication enable default line enable aaa authorization exec default local aaa authorization commands 15 default local aaa accounting network acct_methods start-stop group rad_acct ! aaa session-id common clock timezone EST -5 clock summer-time EDT recurring ip domain name ESI ! ! dot11 syslog dot11 vlan-name one vlan 1 dot11 vlan-name two vlan 2 ! dot11 ssid one vlan 1 authentication open eap eap_methods authentication network-eap eap_methods authentication key-management wpa version 2 accounting rad_acct ! dot11 ssid two vlan 2 authentication open guest-mode ! dot11 network-map ! ! username ESIadmin privilege 15 secret 5 $1$p02C$WVHr5yKtRtQxuFxPU8NOx. ! ! bridge irb ! ! interface Dot11Radio0 no ip address no ip route-cache ! encryption vlan 1 mode ciphers aes-ccm ! broadcast-key vlan 1 change 30 ! ! ssid one ! ssid two ! antenna gain 0 station-role root ! interface Dot11Radio0.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface Dot11Radio0.2 encapsulation dot1Q 2 no ip route-cache bridge-group 2 bridge-group 2 subscriber-loop-control bridge-group 2 block-unknown-source no bridge-group 2 source-learning no bridge-group 2 unicast-flooding bridge-group 2 spanning-disabled ! interface Dot11Radio1 no ip address no ip route-cache shutdown ! encryption vlan 1 mode ciphers aes-ccm ! broadcast-key vlan 1 change 30 ! ! ssid one ! antenna gain 0 dfs band 3 block channel dfs station-role root ! interface Dot11Radio1.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface GigabitEthernet0 description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router no ip address no ip route-cache ! interface GigabitEthernet0.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 no bridge-group 1 source-learning bridge-group 1 spanning-disabled ! interface GigabitEthernet0.2 encapsulation dot1Q 2 no ip route-cache bridge-group 2 no bridge-group 2 source-learning bridge-group 2 spanning-disabled ! interface BVI1 ip address 192.168.1.2 255.255.255.0 no ip route-cache ! ip http server no ip http secure-server ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag access-list 10 permit 192.168.1.0 0.0.0.255 radius-server host 192.168.1.5 auth-port 1812 acct-port 1813 key ***** bridge 1 route ip

  Read the article

• Hudson plugin problem

  - by user27644

  Hi. I've created almost the same plugin as JobTypeColumn. There is only one difference - it shows job description instead of job type. But after i can't add this column to my list view. I have an NullPointerException after i edited my config.xml manually. java.lang.NullPointerException at hudson.model.Descriptor.newInstancesFromHeteroList(Descriptor.java:626) at hudson.util.DescribableList.rebuildHetero(DescribableList.java:164) at hudson.model.ListView.submit(ListView.java:262) at hudson.model.View.doConfigSubmit(View.java:484) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.kohsuke.stapler.Function$InstanceFunction.invoke(Function.java:185) at org.kohsuke.stapler.Function.bindAndInvoke(Function.java:101) at org.kohsuke.stapler.Function.bindAndInvokeAndServeResponse(Function.java:54) at org.kohsuke.stapler.MetaClass$1.doDispatch(MetaClass.java:74) at org.kohsuke.stapler.NameBasedDispatcher.dispatch(NameBasedDispatcher.java:30) at org.kohsuke.stapler.Stapler.invoke(Stapler.java:492) at org.kohsuke.stapler.MetaClass$6.doDispatch(MetaClass.java:180) at org.kohsuke.stapler.NameBasedDispatcher.dispatch(NameBasedDispatcher.java:30) at org.kohsuke.stapler.Stapler.invoke(Stapler.java:492) at org.kohsuke.stapler.Stapler.invoke(Stapler.java:408) at org.kohsuke.stapler.Stapler.service(Stapler.java:117) at javax.servlet.http.HttpServlet.service(HttpServlet.java:45) at winstone.ServletConfiguration.execute(ServletConfiguration.java:249) at winstone.RequestDispatcher.forward(RequestDispatcher.java:335) at winstone.RequestDispatcher.doFilter(RequestDispatcher.java:378) at hudson.util.PluginServletFilter$1.doFilter(PluginServletFilter.java:94) at net.bull.javamelody.MonitoringFilter.doFilter(MonitoringFilter.java:304) at org.jvnet.hudson.plugins.monitoring.HudsonMonitoringFilter.doFilter(HudsonMonitoringFilter.java:31) at hudson.util.PluginServletFilter$1.doFilter(PluginServletFilter.java:97) at hudson.util.PluginServletFilter.doFilter(PluginServletFilter.java:86) at winstone.FilterConfiguration.execute(FilterConfiguration.java:195) at winstone.RequestDispatcher.doFilter(RequestDispatcher.java:368) at hudson.security.csrf.CrumbFilter.doFilter(CrumbFilter.java:47) at winstone.FilterConfiguration.execute(FilterConfiguration.java:195) at winstone.RequestDispatcher.doFilter(RequestDispatcher.java:368) at hudson.security.ChainedServletFilter$1.doFilter(ChainedServletFilter.java:84) at hudson.security.ChainedServletFilter.doFilter(ChainedServletFilter.java:76) at hudson.security.HudsonFilter.doFilter(HudsonFilter.java:164) at winstone.FilterConfiguration.execute(FilterConfiguration.java:195) at winstone.RequestDispatcher.doFilter(RequestDispatcher.java:368) at winstone.RequestDispatcher.forward(RequestDispatcher.java:333) at winstone.RequestHandlerThread.processRequest(RequestHandlerThread.java:244) at winstone.RequestHandlerThread.run(RequestHandlerThread.java:150) at java.lang.Thread.run(Unknown Source)

  Read the article

• IPMI not fucntioning with Network Bonding

  - by muhammed sameer

  Hey, I am having problems with running IPMI on my servers that have network bonding enabled. Platform: CentOS release 5.3 (Final) Kernel: 2.6.18-92.el5 64bit Dell PowerEdge 1950 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet I have bonded the interface eth0 and eth1 as active passive, with eth0 as the active interface, below is conf description from /proc Bonding Mode: fault-tolerance (active-backup) Primary Slave: eth0 Currently Active Slave: eth0 MII Status: up MII Polling Interval (ms): 30 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:22:19:56:b9:cd Slave Interface: eth1 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:22:19:56:b9:cf My IPMI device is as follows IPMI Device Information Interface Type: KCS (Keyboard Control Style) Specification Version: 2.0 I2C Slave Address: 0x10 NV Storage Device: Not Present Base Address: 0x0000000000000CA8 (I/O) Register Spacing: 32-bit Boundaries I Have used openIPMI as well as freeipmi both to control the chassis via the IPMI card, but on servers which have bonding enabled, the command times out, below is the full run of the command with debug info. ipmi_lan_send_cmd:opened=[0], open=[4482848] IPMI LAN host 70.87.28.115 port 623 Sending IPMI/RMCP presence ping packet ipmi_lan_send_cmd:opened=[1], open=[4482848] No response from remote controller Get Auth Capabilities command failed ipmi_lan_send_cmd:opened=[1], open=[4482848] No response from remote controller Get Auth Capabilities command failed Error: Unable to establish LAN session Failed to open LAN interface Unable to get Chassis Power Status On the other hand I configured IPMI on a box with the same specs as mentioned above without bonding and IPMI works perfectly. Has anyone faced this problem with IPMI + Bonding ? I would be thankful is someone helps circumvent this issue. Muhammed Sameer

  Read the article

• Getting 400 Bad Request when requesting by server name on nginx/uwsgi

  - by Marc Hughes

  I'm trying to run 2 different sites on nginx via different ports (they each have a load balancer that points to the appropriate port). The first site work perfectly. The second site... If I access http://localhost:81/ it works correctly If I access http://127.0.01:81/ it works correctly If I access the hostname http://THEHOSTNAME:81/ it fails with a 400 error If I access the public IP http://x.x.x.x:81/ it fails with a 400 error I've set the error_log to info, but the only lines I get in the log when this happens is: ==> /var/log/nginx/access.log <== 10.183.38.141 - - [24/Aug/2014:21:03:28 +0000] "GET / HTTP/1.1" 400 37 "-" "curl/7.36.0" "-" ==> /var/log/nginx/error.log <== 2014/08/24 21:03:28 [info] 7029#0: *5 client 10.183.38.141 closed keepalive connection In my uwsgi log, I only see this: [pid: 6870|app: 0|req: 87/92] 10.28.23.224 () {32 vars in 380 bytes} [Sun Aug 24 21:05:21 2014] GET / => generated 26 bytes in 1 msecs (HTTP/1.1 400) 2 headers in 82 bytes (1 switches on core 2) What should be my next step in debugging this?

  Read the article

• Uknown nginx Error Messages

  - by Sparsh Gupta

  Hello, I am getting some nginx errors as I can see them in my error.log which I am unable to understand. They look like: ERRORS: 2011/03/13 21:48:21 [crit] 14555#0: *323314343 open() "/usr/local/nginx/proxy_temp/0/95/0000000950" failed (13: Permission denied) while reading upstream, client: XX.XX.XX.XX, server: , request: "GET /abc.jpg 2 HTTP/1.0", upstream: "http://192.168.162.141:80/abc.jpg", host: "example.com", referrer: "http://domain.com" 2011/03/13 22:00:07 [crit] 14552#0: *324171134 open() "/usr/local/nginx/proxy_temp/1/95/0000000951" failed (13: Permission denied) while reading upstream, client: XX.XX.XX.XY, server: , request: "GET mno.png HTTP/1.1", upstream: "http://192.168.162.141:80/mno.png", host: "example.com", referrer: "http://domain2.com" I also looked at these locations but found that there is no file by this name. root@li235-57:/var/log/nginx# /usr/local/nginx/proxy_temp/1/ 00/ 01/ 02/ 03/ 04/ 05/ 06/ 07/ 08/ 09/ 10/ 11/ 12/ 13/ 14/ 15/ 16/ 17/ 18/ 19/ 20/ 21/ 22/ 23/ 24/ 25/ 26/ 27/ 28/ 29/ 30/ 31/ 32/ 33/ 34/ 35/ 36/ 37/ root@li235-57:/var/log/nginx# ls /usr/local/nginx/proxy_temp/0/ 01/ 02/ 03/ 04/ 05/ 06/ 07/ 08/ 09/ 10/ 11/ 12/ 13/ 14/ 15/ 16/ 17/ 18/ 19/ 20/ 21/ 22/ 23/ 24/ 25/ 26/ 27/ 28/ 29/ 30/ 31/ 32/ 33/ 34/ 35/ 36/ 37/ Can someone help me whats going on / how can I debug this more and better fix this Thanks

  Read the article

• Puppet Agent fails sporadically, with either timeout or "Could not find class" error

  - by smokris

  I have puppet master running on a Xen dom0, and 3 domUs syncing to it via an hourly crontab puppet agent --test. About 80% of the time, the puppet agent --test completes successfully: info: Retrieving plugin info: Caching catalog for test3 info: Applying configuration version '1333319732' notice: Finished catalog run in 5.08 seconds The other 20% of the time, it fails midway, with errors such as the following: err: Could not retrieve catalog from remote server: Error 400 on SERVER: Could not find class iptables for test1 at /etc/puppet/manifests/site.pp:1 on node test1 warning: Not using cache on failed catalog err: Could not retrieve catalog; skipping run or info: Retrieving plugin info: Caching catalog for test2 info: Applying configuration version '1333319732' notice: Finished catalog run in 24.73 seconds err: Could not send report: Error 500 on SERVER: Internal Server Error private method `gsub' called for WEBrick::HTTPStatus::RequestTimeout:Class WEBrick/1.3.1 (Ruby/1.8.5/2006-08-25) OpenSSL/0.9.8e-rhel5 at puppet:8140 or info: Retrieving plugin err: Could not retrieve catalog from remote server: execution expired warning: Not using cache on failed catalog err: Could not retrieve catalog; skipping run or info: Retrieving plugin info: Caching catalog for test3 info: Applying configuration version '1333319732' notice: Finished catalog run in 9.47 seconds err: Could not send report: Error 408 on SERVER: Request Timeout During this time, I've not made any changes to the Puppet configuration — it just sporadically fails. I'm running puppet-2.7.12 on CentOS, and followed the setup instructions described on http://docs.puppetlabs.com/learning/agent_master_basic.html. Any ideas about how I can troubleshoot this?

  Read the article

• Help diagnosing Likewise Open Active Directory authentication problem

  - by purpletonic

  I have two servers which were up until recently authenticating against the companies Active Directory Domain controller. I believe a recent change to the Active Directory administrator password caused the servers to stop authenticating against AD. I tried to add the servers back to the domain using the command: domainjoin-cli join example.com adusername this seemed to work without complaints, but when I try to login via ssh with my domain account, I get an invalid password error. When I run the command: lw-enum-users it prints all of the domain users, and looking up my own account, I see that it is valid and my password hasn't expired. I also ran lw-get-status and received the following: LSA Server Status: Agent version: 5.0.0 Uptime: 0 days 3 hours 35 minutes 46 seconds [Authentication provider: lsa-activedirectory-provider] Status: Online Mode: Un-provisioned Domain: example.com Forest: example.com Site: Default-First-Site-Name Online check interval: 300 seconds \[Trusted Domains: 1\] \[Domain: EXAMPLE\] DNS Domain: example.com Netbios name: EXAMPLE Forest name: example.com Trustee DNS name: Client site name: Default-First-Site-Name Domain SID: S-1-5-24-1081533780-4562211299-822531512 Domain GUID: 057f0239-7715-4711-e64b-eb5eeed20e65 Trust Flags: \[0x001d\] \[0x0001 - In forest\] \[0x0004 - Tree root\] \[0x0008 - Primary\] \[0x0010 - Native\] Trust type: Up Level Trust Attributes: \[0x0000\] Trust Direction: Primary Domain Trust Mode: In my forest Trust (MFT) Domain flags: \[0x0001\] \[0x0001 - Primary\] \[Domain Controller (DC) Information\] DC Name: dc1.example.com DC Address: 10.11.0.103 DC Site: Default-First-Site-Name DC Flags: \[0x000003fd\] DC Is PDC: yes DC is time server: yes DC has writeable DS: yes DC is Global Catalog: yes DC is running KDC: yes [Authentication provider: lsa-local-provider] Status: Online Mode: Local system Anyone got any ideas what might be occurring? Thanks in advance!

  Read the article

• Internal but no external Citrix Access?

  - by leeand00

  We recently had to reload our configuration of Citrix on our server Server1, and since we have, we can access Citrix internally, but not externally. Normally we access Citrix from http://remote.xyz.org/Citrix/XenApp but since the configuration was reloaded we are met with a Service Unavailable message. Internally accessing the Citrix web application from http://localhost/Citrix/XenApp/ on Server1 we are able to access the web application. And also from machines on our local network using http://Server1/Citrix/XenApp/. I have gone into the Citrix Access Management Console and from the tree pane on the left clicked on Citrix Access Management Console->Citrix Resources->Configuration Tools->Web Interface->http://remote.xyz.org/Citrix/PNAgent Citrix Access Management Console->Citrix Resources->Configuration Tools->Web Interface->http://remote.xyz.org/Citrix/XenApp, which in both cases displays a screen that reads Secure client access. Here it offers me several options: Direct, Alternate, Translated, Gateway Direct, Gateway Alternate, Gateway Translated. I know that I can change the method of use by clicking Manage secure client access->Edit secure client access settings which opens a window that reads "Specify Access Methods", and below that reads "Specify details of the DMZ settings, including IP address, mask, and associated access method", I don't know what the original settings were, and I also don't know how our DMZ is configured so that I can specify the correct settings, to give access to our external users on the http://remote.xyz.org/Citrix/XenApp site. We have a vendor who setup our DMZ and does not allow us access to the gateway to see these settings. What sorts of questions should I ask them to restore remote access?

  Read the article

• error 20014 with mod_proxy

  - by punkish

  I have strange situation. I need to call a program in cgi-bin from within a perl script. When I try to do that with exec($program), I get (20014)Internal error: proxy: error reading status line from remote server proxy: Error reading from remote server returned by ... The long story... I am calling mapserv (http://mapserver.org) as a cgi program from OpenLayers (http://openlayers.org). Ordinarily, my web site is served by Perl Dancer, but the mapserver calls are made directly to http://server/cgi-bin/mapserv from JavaScript. The Dancer web site is served by Starman behind an Apache2 proxy front-end. This is how it looks [browser] -> http://server/app -> [apache2] -> proxy port 5000 -> Starman | | +-> http://server/cgi-bin/mapserv -> [apache2] -> cgi-bin -> mapserv This is what I am trying to accomplish [browser] -> http://server/app -> [apache2] -> proxy port 5000 -> Starman | | mapserv <-- cgi-bin <-- [apache2] <--+ I saw this question re: 20014 error, but that suggested solution didn't help. Any other hints?

  Read the article

• HP Storageworks 448 tape drive input/output error with Ubuntu

  - by Dan D

  I'm trying to set a backup to tape of a machine using flexbackup. However any attempt to write to the tape drive (via either flexbackup or just tar) results in "/dev/st0: Input/output error" The machine seems to recognise the drive (HP Storageworks Ultrium 448) and that there's a tape in it and "mt status" seems to work... "mt -f /dev/st0 rewind" or "erase" throw no errors... root@stor001:/# mt status SCSI 2 tape drive: File number=0, block number=0, partition=0. Tape block size 0 bytes. Density code 0x42 (LTO-2). Soft error count since last status=0 General status bits on (41010000): BOT ONLINE IM_REP_EN root@stor001:/# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: DVDRAM GSA-4084N Rev: KS02 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi2 Channel: 00 Id: 03 Lun: 00 Vendor: HP Model: Ultrium 2-SCSI Rev: S65D Type: Sequential-Access ANSI SCSI revision: 03 "tell" does however root@stor001:/# mt -f /dev/st0 tell /dev/st0: Input/output error Based on a forum post I found, I tried: root@stor001:/# dd if=/dev/zero of=/dev/nst0 bs=1024 count=10 10+0 records in 10+0 records out 10240 bytes (10 kB) copied, 5.0815 s, 2.0 kB/s which gave the person on the forum an error but seems to work for me. If anyone has any suggestions, I'm all ears...

  Read the article

• Getting an error when mounting LVM snapshot

  - by Sandra

  I have migrated a file based Xen guest to LVM using dd bs=1M if=/dev/zero of=/dev/vg00/vm10 qemu-img convert ~/vm10.qcow2 -O raw /dev/vg00/vm10 and changed the Xen domain file for the VM to use the LV instead of the old file. The VM boots up, and now on the Xen host would I like to make a snapshot of the running VM. # lvcreate --size 10G --snapshot --name vm10-snapshot /dev/vg00/vm10 Logical volume "vm10-snapshot" created # mount /dev/vg00/vm10-snapshot /mnt/snapshot/ mount: you must specify the filesystem type # dmesg |tail EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. hfs: unable to find HFS+ superblock VFS: Can't find ext3 filesystem on dev dm-4. hfs: unable to find HFS+ superblock hfs: unable to find HFS+ superblock VFS: Can't find ext3 filesystem on dev dm-2. hfs: unable to find HFS+ superblock hfs: unable to find HFS+ superblock hfs: unable to find HFS+ superblock For some reason it can't see it is an EXT3 filesystem. I have also tried to mount with -t ext3, but still didn't mount. # lvdisplay --- Logical volume --- LV Name /dev/vg00/vm10 VG Name vg00 LV UUID I1y1vQ-Bac5-5jwW-melh-TY5h-l9NO-qaelKk LV Write Access read/write LV snapshot status source of /dev/vg00/vm10-snapshot [active] LV Status available # open 2 LV Size 8.00 GB Current LE 2048 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2 --- Logical volume --- LV Name /dev/vg00/vm10-snapshot VG Name vg00 LV UUID GWsOx3-TPpr-GW64-uiMz-u1YN-QU4h-l0Kala LV Write Access read/write LV snapshot status active destination for /dev/vg00/vm10 LV Status available # open 0 LV Size 8.00 GB Current LE 2048 COW-table size 10.00 GB COW-table LE 2560 Allocated to snapshot 0.00% Snapshot chunk size 4.00 KB Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:4 # What could the problem be?

  Read the article

• EFI pxe network boot error

  - by Lee

  Asking this on both [serverfault][1] and [superuser][2]. When attempting to network boot RHEL 5.4 on an old ia64 machine I get the following error : ![alt text][3] So I've basically followed the tutorial here : [http://www-uxsup.csx.cam.ac.uk/pub/doc/suse/sles9/adminguide-sles9/ch04s03.html][4] DHCPD,TFTPD etc are already setup and working with standard x86 PXE clients. I've unpacked the boot.img file into /tftpboot/ia64/ and passed the path to the elilo.efi file via DHCP with the filename ""; option. Changing this filename generates a PXE file not found error (see below). So I assume that PXE has found the file... ![alt text][5] The only thing wrong I can find in the logs is : Jan 6 19:49:31 dhcphost in.tftpd[31379]: tftp: client does not accept options Any ideas? I'm sure I hit a problem like this a few years ago but I can't remember the fix :) Thanks in advance! Thanks in advance! [1]: http:// serverfault.com/questions/100188/ efi-pxe-network-boot-error [2]: http:// superuser.com/questions/92295/ efi-pxe-network-boot-error [3]: http:// i.imgur.com/Zx1Jy. png [4]: http:// www-uxsup.csx.cam.ac.uk/pub/doc/suse/sles9/adminguide-sles9/ch04s03.html [5]: http:// i.imgur.com/CEzGf. jpg

  Read the article

• Create new folder for new sender name and move message into new folder

  - by Dave Jarvis

  Background I'd like to have Outlook 2010 automatically move e-mails into folders designated by the person's name. For example: Click Rules Click Manage Rules & Alerts Click New Rule Select "Move messages from someone to a folder" Click Next The following dialog is shown: Problem The next part usually looks as follows: Click people or public group Select the desired person Click specified Select the desired folder Question How would you automate those problematic manual tasks? Here's the logic for the new rule I'd like to create: Receive a new message. Extract the name of the sender. If it does not exist, create a new folder under Inbox Move the new message into the folder assigned to that person's name I think this will require a VBA macro. Related Links http://www.experts-exchange.com/Software/Office_Productivity/Groupware/Outlook/A_420-Extending-Outlook-Rules-via-Scripting.html http://msdn.microsoft.com/en-us/library/office/ee814735.aspx http://msdn.microsoft.com/en-us/library/office/ee814736.aspx http://stackoverflow.com/questions/11263483/how-do-i-trigger-a-macro-to-run-after-a-new-mail-is-received-in-outlook http://en.kioskea.net/faq/6174-outlook-a-macro-to-create-folders http://blogs.iis.net/robert_mcmurray/archive/2010/02/25/outlook-macros-part-1-moving-emails-into-personal-folders.aspx Update #1 The code might resemble something like: Public WithEvents myOlApp As Outlook.Application Sub Initialize_handler() Set myOlApp = CreateObject("Outlook.Application") End Sub Private Sub myOlApp_NewMail() Dim myInbox As Outlook.MAPIFolder Dim myItem As Outlook.MailItem Set myInbox = myOlApp.GetNamespace("MAPI").GetDefaultFolder(olFolderInbox) Set mySenderName = myItem.SenderName On Error GoTo ErrorHandler Set myDestinationFolder = myInbox.Folders.Add(mySenderName, olFolderInbox) Set myItems = myInbox.Items Set myItem = myItems.Find("[SenderName] = " & mySenderName) myItem.Move myDestinationFolder ErrorHandler: Resume Next End Sub Update #2 Split the code as follows: Sent a test message and nothing happened. The instructions for actually triggering a message when a new message arrives are a little light on details (for example, no mention is made regarding ThisOutlookSession and how to use it). Thank you.

  Read the article

• ProFTPD / PAM issues with new centos/virtualmin install

  - by iamthewit

  I just installed CentOS 5.4 on a rackspace cloud server and installed virtualmin which all seemed to go fine. The only problem I have is that I can not access the virtual servers directories via FTP. I get the following from filezilla: Status: Connecting to 1.1.1.1:21... Status: Connection established, waiting for welcome message... Response: 220 FTP Server ready. Command: USER username Response: 331 Password required for username. Command: PASS *************** Response: 230 User username logged in. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (1,1,1,1,216,214) Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing and I get this from my /var/secure/log file Sep 22 19:40:42 stickeeserver proftpd: pam_unix(proftpd:session): session opened for user username by (uid=0) Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - USER nastypasty: Login successful. Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - Preparing to chroot to directory '/home/username' Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - mod_delay/0.5: delaying for 728 usecs Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - error setting IPV6_V6ONLY: Protocol not available Any help would be greatly appreciated, I'm not totally new to Linux but it's not my strongest subject. I do like to know exactly why problems occur though and how exactly to fix them so the more detail the better! cheers

  Read the article

• Convert HTACCESS mod_rewrite directives to nginx format?

  - by Chris

  I'm brand new to nginx and I am trying to convert the app I wrote over from Apache as I need the ability to serve a lot of clients at once without a lot of overhead! I'm getting the hang of setting up nginx and FastCGI PHP but I can't wrap my head around nginx's rewrite format just yet. I know you have to write some simple script that goes in the server {} block in the nginx config but I'm not yet familiar with the syntax. Could anyone with experience with both Apache and nginx help me convert this to nginx format? Thanks! # ------------------------------------------------------ # # Rewrite from canonical domain (remove www.) # # ------------------------------------------------------ # RewriteCond %{HTTP_HOST} ^www.domain.com RewriteRule (.*) http://domain.com/$1 [R=301,L] # ------------------------------------------------------ # # This redirects index.php to / # # ------------------------------------------------------ # RewriteCond %{THE_REQUEST} ^[A-Z]+\ /(index|index\.php)\ HTTP/ RewriteRule ^(index|index\.php)$ http://domain.com/ [R=301,L] # ------------------------------------------------------ # # This rewrites 'directories' to their PHP files, # # fixes trailing-slash issues, and redirects .php # # to 'directory' to avoid duplicate content. # # ------------------------------------------------------ # RewriteCond %{DOCUMENT_ROOT}/$1.php -f RewriteRule ^(.*)$ $1.php [L] RewriteCond %{DOCUMENT_ROOT}/$1.php -f RewriteRule ^(.*)/$ http://domain.com/$1 [R=301,L] RewriteCond %{THE_REQUEST} ^[A-Z]+\ /[^.]+\.php\ HTTP/ RewriteCond %{DOCUMENT_ROOT}/$1.php -f RewriteRule ^([^.]+)\.php$ http://domain.com/$1 [R=301,L] # ------------------------------------------------------ # # If it wasn't redirected previously and is not # # a file on the server, rewrite to image generation # # ------------------------------------------------------ # RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^([a-z0-9_\-@#\ "'\+]+)/?([a-z0-9_\-]+)?(\.png|/)?$ generation/image.php?user=${escapemap:$1}&template=${escapemap:$2} [NC,L]

  Read the article

• different nmap results

  - by aasasas

  Hello I have a scan on my server form outside and from inside, why results are different? [root@xxx ~]# nmap -sV -p 0-65535 localhost Starting Nmap 5.51 ( http://nmap.org ) at 2011-02-16 07:59 MSK Nmap scan report for localhost (127.0.0.1) Host is up (0.000015s latency). rDNS record for 127.0.0.1: localhost.localdomain Not shown: 65534 closed ports PORT STATE SERVICE VERSION 22/tcp open ssh OpenSSH 4.3 (protocol 2.0) 80/tcp open http Apache httpd 2.2.3 ((CentOS)) Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 7.99 seconds AND sh-3.2# nmap -sV -p 0-65535 xxx.com Starting Nmap 5.51 ( http://nmap.org ) at 2011-02-16 00:01 EST Warning: Unable to open interface vmnet1 -- skipping it. Warning: Unable to open interface vmnet8 -- skipping it. Stats: 0:07:49 elapsed; 0 hosts completed (1 up), 1 undergoing SYN Stealth Scan SYN Stealth Scan Timing: About 36.92% done; ETC: 00:22 (0:13:21 remaining) Stats: 0:22:05 elapsed; 0 hosts completed (1 up), 1 undergoing Service Scan Service scan Timing: About 75.00% done; ETC: 00:23 (0:00:02 remaining) Nmap scan report for xxx.com (x.x.x.x) Host is up (0.22s latency). Not shown: 65528 closed ports PORT STATE SERVICE VERSION 21/tcp open tcpwrapped 22/tcp open ssh OpenSSH 4.3 (protocol 2.0) 25/tcp open tcpwrapped 80/tcp open http Apache httpd 2.2.3 ((CentOS)) 110/tcp open tcpwrapped 143/tcp open tcpwrapped 443/tcp open tcpwrapped 8080/tcp open http-proxy?

  Read the article

• Firefox and Chrome keeps forcing HTTPS on Rails app using nginx/Passenger

  - by Steve

  I've got a really weird problem here where every time I try to browse my Rails app in non-SSL mode Chrome (v16) and Firefox (v7) keeps forcing my website to be served in HTTPS. My Rails application is deployed on a Ubuntu VPS using Capistrano, nginx, Passenger and a wildcard SSL certificate. I have set these parameters for port 80 in the nginx.conf: passenger_set_cgi_param HTTP_X_FORWARDED_PROTO http; passenger_set_cgi_param HTTPS off; The long version of my nginx.conf can be found here: https://gist.github.com/2eab42666c609b015bff The ssl-redirect.include file contains: rewrite ^/sign_up https://$host$request_uri? permanent ; rewrite ^/login https://$host$request_uri? permanent ; rewrite ^/settings/password https://$host$request_uri? permanent ; It is to make sure those three pages use HTTPS when coming from non-SSL request. My production.rb file contains this line: # Enable HTTP and HTTPS in parallel config.middleware.insert_before Rack::Lock, Rack::SSL, :exclude => proc { |env| env['HTTPS'] != 'on' } I have tried redirecting to HTTP via nginx rewrites, Ruby on Rails redirects and also used Rails view url using HTTP protocol. My application.rb file contains this methods used in a before_filter hook: def force_http if Rails.env.production? if request.ssl? redirect_to :protocol => 'http', :status => :moved_permanently end end end Every time I try to redirect to HTTP non-SSL the browser attempts to redirect it back to HTTPS causing an infinite redirect loop. Safari, however, works just fine. Even when I've disabled serving SSL in nginx the browsers still try to connect to the site using HTTPS. I should also mention that when I pushed my app on to Heroku, the Rails redirect work just fine for all browsers. The reason why I want to use non-SSL is that my homepage contains non-secure dynamic embedded objects and a non-secure CDN and I want to prevent security warnings. I don't know what is causing the browser to keep forcing HTTPS requests.

  Read the article

• Mysql Fail to start

  - by John Naegle

  I'm running a Ubuntu 12.04 LTS Virtual Machine. Last week, the VM stopped unexpectedly now mysql will not start on the VM. These two events may be related, they may not be. When I try to connect: $ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) Then: $ sudo service mysql start start: Job failed to start And $ dmesg [ 1838.218400] type=1400 audit(1374633238.253:50): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=18473 comm="apparmor_parser" [ 1838.358656] init: mysql main process (18477) terminated with status 1 [ 1838.358695] init: mysql main process ended, respawning [ 1839.269303] init: mysql post-start process (18478) terminated with status 1 And $ service mysql status mysql stop/waiting I think this means mysql is crashing when it starts: $ sudo mysqld start 130723 21:51:24 InnoDB: Assertion failure in thread 3064211200 in file fut0lst.ic line 83 InnoDB: Failing assertion: addr.page == FIL_NULL || addr.boffset >= FIL_PAGE_DATA InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: about forcing recovery. 02:51:24 UTC - mysqld got signal 6 ; Per the manual, I went to the data directory (/var/lib/mysql) and ran this: myisamchk --silent --force */*.MYI Then: $ sudo mysqld ... InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: for more information. ... Is my database corrupt? What can I do to recover? Re-install mysql? Something less drastic? I'm fine with losing the database, I just want a working system.

  Read the article

• Apache2 with lighttpd as proxy

  - by andrzejp

  Hi, I am using apache2 as web server. I would like to help him lighttpd as a proxy for static content. Unfortunately I can not well set up lighttpd and apache2. (OS: Debian) Important things from lighttpd.config: server.modules = ( "mod_access", "mod_alias", "mod_accesslog", "mod_proxy", "mod_status", ) server.document-root = "/www/" server.port = 82 server.bind = "localhost" $HTTP["remoteip"] =~ "127.0.0.1" { alias.url += ( "/doc/" => "/usr/share/doc/", "/images/" => "/usr/share/images/" ) $HTTP["url"] =~ "^/doc/|^/images/" { dir-listing.activate = "enable" } } I would like to use lighttpd in only one site operating as a virtual directory on apache2. Configuration of this virtual directory: ProxyRequests Off ProxyPreserveHost On ProxyPass /images http://0.0.0.0:82/ ProxyPass /imagehosting http://0.0.0.0:82/ ProxyPass /pictures http://0.0.0.0:82/ ProxyPassReverse / http://0.0.0.0:82/ ServerName MY_VALUES ServerAlias www.MY_VALUES UseCanonicalName Off DocumentRoot /www/MYAPP/forum <Directory "/www/MYAPP/forum"> DirectoryIndex index.htm index.php AllowOverride None ... As you can see (or not;)) my service is physically located at the path: / www / myapp / forum and I would like to support lighttpd dealt with folders: / www / myapp / forum / images / www / myapp / forum / imagehosting / www / myapp / forum / pictures and left the rest (PHP scripts) for apache After running lighttpd and apache2 working party, but did not show up any images of these locations. What is wrong?

  Read the article

• Unable to access stackexchange sites from this system

  - by Sandeepan Nath

  Earlier, I was not able to access most of the stackexchange sites like stackoverflow, programmers.SE etc. on my home Windows XP system. I was able to access only a few like http://meta.stackexchange.com and not even http://www.meta.stackexchange.com (note the www). I tried many other sites like http://www.stackoverflow.com, http://area51.stackexchange.com/ but was getting page not found errors on all browsers. Even pinging from terminal was saying destination host unreachable. I did not check recently but may be all SE sites are unreachable now. I was clueless about what could be the issue. I thought some firewall issue? So, I stopped AVG antivirus's firewall, then completely uninstalled it and even turned of windows firewall. But still not reachable even after fresh installation of Windows 7. Then I noticed a "Too many requests" notice on google. This page - http://www.google.co.in/sorry/?continue=http://www.google.co.in/# I don't know why this appeared but I guess somehow too many requests might have been sent to these sites and they blocked me. But in that case, SE would be smart enough to show a captcha like google. So, how to confirm the problem and fix it. Similar questions like these don't look solved yet - Unable to access certain websites Unable to Access Certain Websites I have lately started actively participating in lots of SE sites. There are new new questions popping up in my mind every time and I am not able to ask them. Please help! Thanks

  Read the article

• SFTP only works occasionally

  - by 82din

  I suddenly get this error using SFTP: Status: Connecting to example.com... Response: fzSftp started Command: open "[email protected]" 22 Command: Pass: ********* Status: Connected to example.com Status: Retrieving directory listing... Command: pwd Response: Current directory is: "/root" Command: ls Status: Listing directory /root Error: Connection timed out Error: Failed to retrieve directory listing I tried using FileZila, Cyberduck, Shell (Terminal), same result. However, it worked fine today (just a few seconds) in Passive mode. I guess something changed in my network, so I have tried both: Active and Passive mode: Connecting to probe.filezilla-project.org Response: 220 FZ router and firewall tester ready USER FileZilla Response: 331 Give any password. PASS 3.6.0.2 Response: 230 logged on. Checking for correct external IP address Retrieving external IP address from http://checkip.dyndns.org:8245/ Checking for correct external IP address IP <external IP> big-bf-ccc-f Response: 200 OK PREP 49565 Response: 200 Using port 49565, data token 380352881 PORT 186,15,222,5,193,157 Response: 200 PORT command successful LIST Response: 150 opening data connection Response: 503 Failure of data connection. Server sent unexpected reply. Connection closed Because I'm working behind a router, I get my external IP from http://checkip.dyndns.org:8245/ I also tested different range of ports.

  Read the article

• how do i write an init script for django-supervisor

  - by amateur

  pardon me as this is my first time attempting to write a init script for centos 5. I am using django + supervisor to manage my celery workers, scheduler. Now, this is my naive simple attempt /etc/init.d/supervisor #!/bin/sh # # /etc/rc.d/init.d/supervisord # # Supervisor is a client/server system that # allows its users to monitor and control a # number of processes on UNIX-like operating # systems. # # chkconfig: - 64 36 # description: Supervisor Server # processname: supervisord # Source init functions /home/foo/virtualenv/property_env/bin/python /home/foo/bar/manage.py supervisor --daemonize inside my supervisor.conf: [program:celerybeat] command=/home/property/virtualenv/property_env/bin/python manage.py celerybeat --loglevel=INFO --logfile=/home/property/property_buyer/logfiles/celerybeat.log [program:celeryd] command=/home/foo/virtualenv/property_env/bin/python manage.py celeryd --loglevel=DEBUG --logfile=/home/foo/bar/logfiles/celeryd.log --concurrency=1 -E [program:celerycam] command=/home/foo/virtualenv/property_env/bin/python manage.py celerycam I couldn't get it to work. 2013-08-06 00:21:03,108 INFO exited: celerybeat (exit status 2; not expected) 2013-08-06 00:21:06,114 INFO spawned: 'celeryd' with pid 11772 2013-08-06 00:21:06,116 INFO spawned: 'celerycam' with pid 11773 2013-08-06 00:21:06,119 INFO spawned: 'celerybeat' with pid 11774 2013-08-06 00:21:06,146 INFO exited: celerycam (exit status 2; not expected) 2013-08-06 00:21:06,147 INFO gave up: celerycam entered FATAL state, too many start retries too quickly 2013-08-06 00:21:06,147 INFO exited: celeryd (exit status 2; not expected) 2013-08-06 00:21:06,152 INFO gave up: celeryd entered FATAL state, too many start retries too quickly 2013-08-06 00:21:06,152 INFO exited: celerybeat (exit status 2; not expected) 2013-08-06 00:21:07,153 INFO gave up: celerybeat entered FATAL state, too many start retries too quickly I believe it is the init script, but please help me understand what is wrong.

  Read the article

• Rails 3 passenger nginx application spawner server error on Synology NAS

  - by peresleguine

  Question updated, please read UPD2. I'm trying to deploy app through passenger nginx module on DS710+ (ruby 1.9.2p0 installed). There is syntax error relative to has_and_belongs_to_many_association.rb file. Please look at the screenshot(deleted, question updated). I'm pretty sure the problem isn't in library file. App is running good via webrick. Could you please advise what to look for? UPD1 ruby -v ruby 1.9.2p0 (2010-08-18 revision 29036) [i686-linux] gem list -d passenger *** LOCAL GEMS *** passenger (3.0.6) Author: Phusion - http://www.phusion.nl/ Rubyforge: http://rubyforge.org/projects/passenger Homepage: http://www.modrails.com/ Installed at: /usr/lib/ruby/gems/1.9.1 Easy and robust Ruby web application deployment UPD2 I've decided to reinstall everything. It solved previous problem but caused another one. The error is: The application spawner server exited unexpectedly: Unexpected end-of-file detected. Here is screenshot. New output: ruby -v ruby 1.9.2p180 (2011-02-18 revision 30909) [x86_64-linux] gem list -d passenger *** LOCAL GEMS *** passenger (3.0.7) Author: Phusion - http://www.phusion.nl/ Rubyforge: http://rubyforge.org/projects/passenger Homepage: http://www.modrails.com/ Installed at: /usr/lib/ruby/gems/1.9.1 Nginx error.log: [ pid=5653 thr=32771 file=ext/common/Watchdog.cpp:128 time=2011-04-20 14:08:34.505 ]: waitpid() on Phusion Passenger helper agent return -1 with errno = ECHILD, falling back to kill polling [ pid=5654 thr=49156 file=ext/common/Watchdog.cpp:128 time=2011-04-20 14:08:34.506 ]: waitpid() on Phusion Passenger logging agent return -1 with errno = ECHILD, falling back to kill polling 2011/04/20 14:12:33 [notice] 7614#0: signal process started

  Read the article

• Apache Logs - Not Showing Requested URL or User IP

  - by iarfhlaith

  Hey all, I'm having a problem with a server that keeps falling over. Looking through the Apache error logs it appears to come from a rogue PHP script. I'm trying to track this down using Apache's error_log and access_log but the server log format isn't giving me the detail I need. I suspect the log format isn't sufficient, but I've reviewed the Apache documentation and I've included the switches that I think I need to see. Here's my LogFormat configuration in the httpd.conf file: `LogFormat "%h %l %u %t \"%r\" %s %b %U %q %T \"%{Referer}i\" \"%{User-Agent}i\"" extended CustomLog logs/access_log extended` Using the %U %q %T switches I expected to see the requested URL, query string, and the time it took to serve the request, but I'm not seeing any of this information when I tail the log. Here's an example: 127.0.0.1 - - [01/Jun/2010:14:12:04 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" 127.0.0.1 - - [01/Jun/2010:14:12:05 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" 127.0.0.1 - - [01/Jun/2010:14:12:06 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" 127.0.0.1 - - [01/Jun/2010:14:12:07 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" 127.0.0.1 - - [01/Jun/2010:14:12:08 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" 127.0.0.1 - - [01/Jun/2010:14:12:09 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" Have a made a mistake in configuring the LogFormat or is it something else? Also, each request appears to come from the localhost. How come it's not giving me the remote user's IP address? Thanks, Iarfhlaith

  Read the article

< Previous Page | 618 619 620 621 622 623 624 625 626 627 628 629  | Next Page >