Search Results

Search found 22641 results on 906 pages for 'use case'.

Page 624/906 | < Previous Page | 620 621 622 623 624 625 626 627 628 629 630 631  | Next Page >

  • apache2 defaultsite redirect but not virtual host

    - by MMM
    I'm trying to set up a new server with several virtual hosts but also such that if the requested fqdn doesn't match a virtual host then the request is redirected to http://example.com/log.php?url=fqdn I have got the default host redirecting as desired however the virtual host that I have defined doesn't work. I'm testing using a different host and curl -I http://hostname.example.com:8080/ on the command line to read the html headers to check for the redirect header directly rather than following it with a browser (to avoid any caching issues). I have defined a virtualhost as the fqdn of the server but when I use curl to request that virtualhost I get redirected. If I request the server by any other name which doesn't have a virtualhost defined I also get redirected. apache version is 2.2.16 on ubuntu The config (concatenated together in order from a couple of different files) is as follows: Listen 8080 NameVirtualHost * <VirtualHost _default_> ServerAdmin [email protected] RewriteEngine On RewriteRule ^(.*)$ http://example.com/log.php?url=%{HTTP_HOST}$1 [R=302,L] </VirtualHost> <VirtualHost *> <Directory "/var/www"> allow from all Options Indexes </Directory> DocumentRoot /var/www ServerName hostname.example.com </VirtualHost> I've also tried ServerName values of hostname.example.com:* and hostname.example.com:8080 In case I wasn't clear enough: anything.anything.any/something requested from my server should redirect to example.com/log.php?url=anything.anything.any/something foo.example.com (not defined as a VirtualHost) requested from my server should redirect to example.com/log.php?url=foo.example.com hostname.example.com (defined as a VirtualHost) requested from my server should return an html document anothername.example.com (also defined as a VirtualHost) requested from my server should return an html document It turns out that because the servers own fqdn is hostname.example.com that gets redirected to the Default VirtualHost even if there is a named VirtualHost for it. Other fqdn's that are not the same as the servers fqdn work as I intended.

    Read the article

  • My hard drive seems to be overheating... what should I do?

    - by George Edison
    After a cold boot, the hard drive in my notebook jumps to 56? within an hour or so of idling. Is 56? a cause for alarm? Notes: The notebook is on a flat desk and none of the vents are obstructed. The video card is currently at 55? and the CPU at 50?. It's a Western Digital 250GB hard drive. SMART reports the drive healthy but does warn that: Edit: this problem had a very surprise ending. I inverted the notebook and unscrewed some of the panels on the back (there was one covering the hard drive, and one that provided access to the memory). I couldn't see any dust, so I simply screwed everything back together and powered it on... and it worked! The temperature is now staying at 46?, and it feels notable cooler to the touch. So I can only assume that some internal fan was malfunctioning or something. Whatever the case, it's working now so I won't complain. Edit: I have an SSD now, so temperature isn't as big an issue as it was when I had a mechanical drive.

    Read the article

  • Add bookmarks to Delicious and Google Bookmarks at the same time

    - by BrianH
    I have used delicious.com (or back then, del.icio.us) to store my bookmarks for a long time now, and I love it. I was looking through some of my Google services, and realized they have a bookmarking service that integrates with your Google searches (I thought they had a bookmarking service before, but it went away? Maybe not). I like delicious just fine - I'm not interested in leaving. But I also like how my Google bookmarks are highlighted (and I'm guessing, brought to the top) in my search results so I can easily tell if I've bookmarked a site (kind of like the "promote up" feature). I can't even count the number of times I search for a site only to find I've been there months or years ago. If sites I've bookmarked in the past are highlighted in my search results, it makes it easier to pick which search result to go to. My question is around bookmarking tools: Is there a bookmarklet or Firefox addon that will let me save a bookmark to multiple services at the same time, in this case, Google and Delicious? Or maybe a service to sync my delicious bookmarks to Google bookmarks on a regular basis? I have used the Delicious addon since the beginning - it would just be nice to add a bookmark to multiple services with 1 addon. For that matter, it would be nice to add Evernote into the mix - click 1 button to save the page to Evernote, and bookmark the page in Google and delicious. EDIT on 7/30/2009 - Summary: A proposed solution is to use the Delicious addon and the GMarks addon to keep the 2 services in sync. I was not able to get the 2 addons to keep everything in sync, so it was also suggest to use the Google Toolbar with the Delicious addon to keep everything in sync. I personally have reservations with letting Google know about every single site I visit, I believe this solution will work, so I am accepting it as the answer. I still wish there was a solution that would let you post a bookmark/page to multiple services at the same time (delicious, google, evernote, digg, diigo, etc.). Thanks!

    Read the article

  • Kernel panic while loading Mac OS X on VMWare

    - by Vladimir Gritsenko
    I'm trying to run Mac OS X 10.6.3 on VMWare 7.1 from within Windows 7 64 bit. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

    Read the article

  • stunnel client uses improper SNI when talking to Apache

    - by Huckle
    I have stunnel listening on port 80 and acting as a client connecting to Apache listening on port 443. Configuration is below. What I'm finding is that if I attempt to connect to localhost:80 the connection is fine but if I connect to 127.0.0.1:80 When I check Apache's logs it indicates that stunnel is using localhost as the SNI both times, but the HTTP request lists localhost in one case and 127.0.0.1 in another. Is it possible to tell stunnel to either use whatever is in the HTTP request or to somehow configure two clients each with different SNI values? stunnel.conf: debug = 7 options = NO_SSLv2 [xmlrpc-httpd] client = yes accept = 80 connect = 443 Apache error.log: [error] Hostname localhost provided via SNI and hostname 127.0.0.1 provided via HTTP are different Apache access.log: "GET / HTTP/1.1" 200 2138 "-" "Wget/1.13.4 (linux-gnu)" "GET / HTTP/1.1" 400 743 "-" "Wget/1.13.4 (linux-gnu)" wget: $wget -d localhost ---request begin--- GET / HTTP/1.1 User-Agent: Wget/1.13.4 (linux-gnu) Accept: */* Host: localhost Connection: Keep-Alive ---request end--- $wget -d 127.0.0.1 ---request begin--- GET / HTTP/1.1 User-Agent: Wget/1.13.4 (linux-gnu) Accept: */* Host: 127.0.0.1 Connection: Keep-Alive ---request end--- edit: Apache Config Nothing out of the ordinary, it's just a virtual host listening to 443 <VirtualHost *:443>

    Read the article

  • Choosing the right TV tuner - USB or PCI TV tuners, hardware/software, DVB? Hybrid/combo/analog?

    - by Nucleon
    Greetings, I'll start with some background information so you know what I'm trying to accomplish and then get to my question. I work at a Television station in the US and we are working on setting up an online DVR/Podcast system for all of our newscasts. So basically we would be recording every newscast in HD, encoding it to flv/h.264 for viewing in a browser on flash compatible and iphone/ipad devices, eventually migrating to WebM when it's browser compliant. This task is theoretically pretty simple as it all it involves is a TV tuner device and a program like VLC, MythTV or whatever to schedule and dump it to a file, encode it with VLC/FFMPEG and push it to the streaming server. Now to the hardware, in order to accomplish that task, should I use an internal PCI tuner or a USB 2.0 tuner? Is there a difference? The bus speeds of both are not too far apart, and is the bus speed really relevant in this case? Does it matter if the device has a hardware encoder or a software encoder? On many sites the USB was recommended for ease of set up and use, but would it overly task a processor, or is that not a concern as long as it's a decent PC (at least duo core, 6gb ram). What's the difference between the stick USB and the Box USBs? To my understanding analog is basically gone in the US, so we would want a hybrid or combo tuner correct? How do those differ from DVB? Are there any other features or concepts which I am missing which may influence the recommended product. It would be ideal if the device which could work in both Linux and a Windows environment, to my knowledge most Hauppauge are? Example 1: PCI Hauppage http://www.newegg.com/Product/Product.aspx?Item=N82E16815116033 Example 2: USB 2.0 Box http://www.newegg.com/Product/Product.aspx?Item=N82E16815116029 Example 3: USB 2.0 Stick http://www.newegg.com/Product/Product.aspx?Item=N82E16815116031 Any guidance from the Superusers would be much appreciated!

    Read the article

  • How can I cache a Subversion password on a server, without storing it in unencrypted form?

    - by Zilk
    My Subversion server only provides access via HTTPS; support for svn+ssh has been dropped because we wanted to avoid creating system users on that machine just for SVN access. Now I'm trying to provide a way for users to cache their passwords for a while, without leaving them stored on the filesystem in unencrypted form. This is no problem for Gnome or KDE users, because they can use gnome-keyring and kwallet, respectively. IIRC, TortoiseSVN has a similar caching mechanism, too. But what about users on a non-GUI system? Some context: in this case, we have a development/testing server where one project has been checked out into the Apache htdocs directory. Development for this project is almost complete, and only minor text/layout changes are performed directly on this server. Nevertheless, the changes should be checked into the repository. There's no kwallet and no gnome-keyring on this system, and the ssh-agent can't help because the repository is accessed via https instead of svn+ssh. As far as I know, that leaves them the choice of entering the password every time they talk to the SVN server, or storing it in an insecure way. Is there any way to get something like what gnome-keyring and kwallet provide in a non-GUI environment?

    Read the article

  • General logging won't work in MySQL

    - by leonstr
    I saw on SF that there's an option in MySQL to log all queries. So, in my version (mysql-server-5.0.45-7.el5 on CentOS 5.2) this appears to be a case of enabling the 'log' option, so I edited /etc/my.cnf to add this: [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql old_passwords= log=/var/log/mysql-general.log [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid I then created the file and set permissions: # touch /var/log/mysql-general.log # chown mysql. /var/log/mysql-general.log # ls -l /var/log/mysql-general.log -rw-r--r-- 1 mysql mysql 0 Jan 18 15:22 /var/log/mysql-general.log But when I start mysqld I get: 120118 15:24:18 mysqld started ^G/usr/libexec/mysqld: File '/var/log/mysql-general.log' not found (Errcode: 13) 120118 15:24:18 [ERROR] Could not use /var/log/mysql-general.log for logging (error 13). Turning logging off for the whole duration of the MySQL server process. To turn it on again: fix the cause, shutdown the MySQL server and restart it. 120118 15:24:18 InnoDB: Started; log sequence number 0 182917764 120118 15:24:18 [Note] /usr/libexec/mysqld: ready for connections. Can anyone suggest why this isn't working?

    Read the article

  • Running multiple services on different servers with IPv6 and a FQDN

    - by Mark Henderson
    One of the things NAT has permitted us to do in the past decade is split physical services onto different servers whilst hiding behind a single interface. For example, I have example.com behind a NAT on 192.0.2.10. I port-forward :80 and :443 to my web server. I'm also port forward :25 to my mail server, and :3389 to a terminal server and :8080 to the web interface of my computer that downloads torrents, and the story goes on. So I have 5 port forwardings going to 4 different computers on example.com. Then, I go and get me some neat IPv6. I assign example.com an IPv6 address of 2001:db8:88:200::10. That's great for my websites, but I want to go to example.com:8080 to get to my torrents, or example:3389 to log on to my terminal server. How can I do this with IPv6, as there is no NAT. Sure, I could create a bunch of new DNS entries for each new service, but then I have to update all my clients who are used to just typing example.com to get to either the website or the terminal server. My users are dumber than two bricks so they won't remember to connect to rdp.example.com. What options do I have for keeping NAT-style functionality with IPv6? In case you haven't figured it out, the above scenario is not a real scenario for me, or perhaps anyone yet, but it's bound to happen eventually. You know, with devops and all.

    Read the article

  • SharePoint Backup/Restore without stsadm

    - by Kevin
    Due to problems we found with the restore of sites/site collections using stsadm (our tasks generated from workflows were not restored), we've taken a different route for backup/restore. We plan a major customization to our SP site and want to take a backup so we can rollback in case the install fails. In our System Testing (not production) environment, we've backed up the 12 hive, the virtual dir's that the IIS points to SharePoint, and the SharePoint databases in SQL (using SQL server to do the db backups). We have custom event handlers and workflows built with Visual Studio, and deploy the dlls to the GAC as version 2 (signed and versioned in Visual Studio). So when we deploy, the GAC will contain 2 versions of the workflows - version 1 and version 2. During the deploy we use SP stsadm features to install/activate the WF's. We also go to each library and add the new, version 2 WFs. This automatically sets the version 1 WF's to "Not Allow" new instances (which is what we want) and the version 2 as active - perfect so far. When we've completed the install, we then assume a failure and attempt to restore to the same machines (SharePoint on one server, SQL on another). We start by uninstalling the version 2 WF's from the GAC, reset IIS (to clear cache of these ver. 2 WF dlls'), restore the 12-hive and virtual directory folders, then restore the SQL dbs. This is all just as manual as you read it - no stsadm here. All seems to work after our restore, it appears the restore was successful - the mods we made to column names, data changes, etc during the install are all reverted back to the original pre-install state. With one exception. When we run a workflow, it always fails and the Logs in the 12-hive indicates the WF is still trying to use the version 2 of the dll (System.IO file not found error) We think we've backed up and restored all the moving pieces of Sharepoint but we're missing something here, does anybody have any ideas why the version 2 WF dlls are still being referenced eventhough we restored all the folders and db's of SharePoint? Thanks, Kevin

    Read the article

  • 1000Base-X layer 2/MAC address details

    - by user69971
    A layer 2 Ethernet frame is sent with a source and destination MAC address. Given a 100Base-TX (copper) trunk between two Cisco switches, I can do a "show interface fa 0/0" on S1 to see the MAC address assigned to the trunking interface, then go to Switch2 and do a "show mac address-table" and find the MAC address of the S1 fa 0/0 interface as a dynamically learned MAC in the table. Given a similar setup with a 1000Base-X (fiber GBIC) trunk, the MAC address shown in "show interface gi 0/0" on S1 does not show up in the MAC address-table of S2. Everything I can find online indicates that 1000Base-X uses largely the same layer 2 format as copper connections. There's some slight alterations - minimum frame size is slightly larger - but the fundamentals of the frame structure appear to be the same, including transmission with a source and destination L2 address. Why doesn't the address of gi 0/0 show up in the MAC address table of the connection switch? The only thing which seems to make sense would be that the GBIC has its own MAC address, almost as if its acting as a mini 2-port switch or hub, with the switch-assigned MAC address showing up on the interface connection and a different MAC address assigned to the fiber side. If this is the case, is there any way to see the GBIC MAC address on the switch? (I've tried to look up the details in IEEE 802.3z but it doesn't seem to be available without an IEEE membership or purchasing the standard. I find the base 802.3 PDFs for download, but not 802.3z.)

    Read the article

  • Why is my RapidSSL Certificate chain is not trusted on ubuntu?

    - by olouv
    I have a website that works perfectly with Chrome & other browser but i get some errors with PHP in CLI mode so i'm investigating it, running this: openssl s_client -showcerts -verify 32 -connect dev.carlipa-online.com:443 Quite suprisingly my HTTPS appears untrusted with a Verify return code: 27 (certificate not trusted) Here is the raw output : verify depth is 32 CONNECTED(00000003) depth=2 C = US, O = GeoTrust Inc., CN = GeoTrust Global CA verify error:num=20:unable to get local issuer certificate verify return:1 depth=2 C = US, O = GeoTrust Inc., CN = GeoTrust Global CA verify error:num=27:certificate not trusted verify return:1 depth=1 C = US, O = "GeoTrust, Inc.", CN = RapidSSL CA verify return:1 depth=0 serialNumber = khKDXfnS0WtB8DgV0CAdsmWrXl-Ia9wZ, C = FR, O = *.carlipa-online.com, OU = GT44535187, OU = See www.rapidssl.com/resources/cps (c)12, OU = Domain Control Validated - RapidSSL(R), CN = *.carlipa-online.com verify return:1 So GeoTrust Global CA appears to be not trusted on the system (Ubuntu 11.10). Added Equifax_Secure_CA to try to solve this... But i get in this case Verify return code: 19 (self signed certificate in certificate chain) ! Raw output : verify depth is 32 CONNECTED(00000003) depth=3 C = US, O = Equifax, OU = Equifax Secure Certificate Authority verify error:num=19:self signed certificate in certificate chain verify return:1 depth=3 C = US, O = Equifax, OU = Equifax Secure Certificate Authority verify return:1 depth=2 C = US, O = GeoTrust Inc., CN = GeoTrust Global CA verify return:1 depth=1 C = US, O = "GeoTrust, Inc.", CN = RapidSSL CA verify return:1 depth=0 serialNumber = khKDXfnS0WtB8DgV0CAdsmWrXl-Ia9wZ, C = FR, O = *.carlipa-online.com, OU = GT44535187, OU = See www.rapidssl.com/resources/cps (c)12, OU = Domain Control Validated - RapidSSL(R), CN = *.carlipa-online.com verify return:1 Edit Looks like my server does not trust/provide the Equifax Root CA, however i do correctly have the file in /usr/share/ca-certificates/mozilla/Equifax...

    Read the article

  • htaccess not properly rewriting urls

    - by Cameron Ball
    This is a bit of a weird one. I'm doing some work on a server, and I need rewrite rules for directories that actually exist (in some cases, they are more than one level deep) At the moment my .htaccess looks like this: RewriteEngine on RewriteRule ^simfiles/([-\ a-zA-Z0-9:/]+)$ http://mydomain.com/?portal=simfiles&folder=$1 [L] And this is working OK, for example, a url like: mydomain.com/sifmiles/my-files Will get redirected to mydomain.com/?portal=simfiles&folder=my-files Or in the case of a directory structure that is deeper than one level: mydomain.com/sifmiles/my-files/more-of-my-files Will get redirected to mydomain.com/?portal=simfiles&folder=my-files/more-of-my-files I wrote the regex so that it won't match things with a . in the path, because there are css and js files which reside in simfiles/somedirectory, and if I redirect everything then these cannot be loaded. I tried a configuration like this: RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^simfiles/([-\ a-zA-Z0-9:/\.]+)$ http://mydomain.com/?portal=simfiles&folder=$1 [L] But that doesn't work, things still don't load properly. So my first question is, how can I achieve this "properly"? I don't like my solution because it means redirects won't occur if the folder has a . in its name. My second problem, is that while the redirection is happening properly, the url becomes: http://mydomain.com/?portal=simfiles&folder=my-files I want the URL to remain clean, like: http://mydomain.com/sifmiles/my-files How can I achieve this?

    Read the article

  • Are HDMI to VGA Adapters Really Device-Specific?

    - by allquixotic
    There are a lot of devices on the market right now (especially mobile devices) with a Micro-HDMI or Mini-HDMI port and no VGA or D-Sub output. Most manufacturers of said devices sell a cable that looks something like this: I have yet to find a cable like this that claims to work on a wide array of devices. In general, these cables claim to work with one specific device only. The way these cables work, I think, is that analog VGA signals are sent from the HDMI port on the device. This should work for devices that have special hardware on the motherboard/GPU capable of driving this. Is it the case that these cables have to be custom designed for each device? Or, is it rather that any device which possesses this special "signaling of analog VGA over the HDMI port" can be made to work with a cable that is physically compatible (i.e. the HDMI end plugs into the device and the VGA end accepts a VGA monitor cable)? Note that I am not looking for a product recommendation, just a conceptual clarification on what exactly these devices are doing. Also, a few remarks: The cables like the one depicted here are not digital to analog converters. I know about these: they are expensive, and they are the ONLY solution if your device only outputs a digital signal and is incapable of driving analog VGA over the HDMI port. The cables like the one depicted here are not straight crossover cables from VGA to HDMI, either. The crossover cables are designed to send a digital HDMI signal over the VGA port's wires; that is, the wire protocol is HDMI (digital) but the physical pinout is the same as VGA, even though nothing analog is happening. Once again, this is not the behavior that, I believe, the devices which I'm talking about in this question are doing. The cabling and devices that this question is about transmit the analog VGA data over the HDMI port (the HDMI port is in the device outputting the data, and the VGA side is the monitor/projector).

    Read the article

  • Throttle CPU Usage consumed by Process

    - by Brett Powell
    We run a game-server company where we basically have large amounts of customers sharing a single machine, and are just on their own instance of a Java Process (Minecraft) managed by our Web Control Panels. In the last few game updates released, we have noticed that many of the third-party plugins our customer's use have become poorly written and we are frequently seeing huge CPU increases from certain servers until we manually kill the process. Our Game Panel automatically restarts processes, so killing them is not really an issue. Our problem is that once once of these servers starts consuming 50%+ CPU Usage, it takes atleast 5 minutes to RDP into the machine, locate who it belongs to, shut it down and notify them. Are there any current solutions for Server 2008 which allow for the throttling of CPU usage or worst case, just auto kill a process stuck using that much? As Minecraft is essentially a single-threaded application, we have investigated using Affinity, although with the variations in our Packages and fluctuations in usage, this doesn't work well for us. Some option to throttle the maximum usage a process can use would be perfect, or at least the option to kill a process using that much. Thanks!

    Read the article

  • Process killing trouble

    - by Aditya Singh
    I am trying to program a server software which involves a lot of testing on java / scala platform. Whenever i compile and execute the code. It starts listening on port 80. Sometimes i need to terminate it by Ctrl+C when it hangs. In that case, ubuntu is not freeing the port. So in order to run the process, i have to restart the machine. I see this at ps aux root 1924 0.0 0.0 5796 1660 pts/0 T 05:44 0:00 sudo scala - root 1925 0.2 1.5 491448 40796 pts/0 Tl 05:44 0:03 java -Xmx256M -Xms16M So process 1924 and 1925. I did sudo kill on both these. But then they keep on persisting even after a long time. sudo nmap -T Aggressive -A -v 127.0.0.1 -p 1-65000 Scanning localhost (127.0.0.1) [65000 ports] Discovered open port 80/tcp on 127.0.0.1 It means its still there ! sudo netstat --tcp --udp --listening --program tcp6 0 0 [::]:www [::]:* LISTEN 1925/java tcp6 0 0 ip6-localhost:ipp [::]:* LISTEN 1185/cupsd This means its 1925 - java How to kill it.

    Read the article

  • What causes "A disk read error occurred, Press Ctrl + Alt + Del to restart"?

    - by Mehrdad
    I have a virtual machine containing Windows XP SP3. When I resized the VHD file (and the embedded partition), and tried booting, I got: A disk read error occurred Press Ctrl + Alt + Del to restart Some notes: FixBoot and FixMBR don't help. ChkDsk doesn't help. The partition is indeed active. The partition starts at sector 63 (it also did so before the problem) of cylinder 1, head 1, and is marked as type 0x07 (NTFS) My host OS reads the VHD and the partition completely fine I'm interested in knowing the cause rather than the fix. So "re-format the disk", "reinstall Windows", etc. aren't valid solutions. It's a virtual machine after all... I have nothing to lose, so I don't care about fixing it. I just want to know what's causing this problem, in case I run into it again on a physical machine (which I have done before). More info: The layout of the original, dynamic VHD (which works correctly): +-----------------------------------------------------------------------------+ ¦ Disk: 3 MBR/GPT: MBR ¦ ¦ Size: 127.00GB CHS: 16578 255 63 ¦ ¦ Sectors: 266338304 Disk Signature: 0xEE3EEE3E ¦ ¦ Partitions: 1 Partition Order: 1 ¦ ¦ Media Type: Fixed Interface: SCSI ¦ ¦ Description: Msft Virtual Disk ¦ +-----------------------------------------------------------------------------¦ ¦Pos Idx Type/Name Size Boot Hide Start Sector Total Sectors DL Vol Label ¦ +--- --- --------- ---- ---- ---- -------------- -------------- -- -----------¦ ¦ 1 1 07-NTFS 1.5G Yes No 63 3,148,677 F: <None> ¦ +-----------------------------------------------------------------------------+ The layout of the resized, fixed-size VHD (which doesn't work): +-----------------------------------------------------------------------------+ ¦ Disk: 3 MBR/GPT: MBR ¦ ¦ Size: 1.50GB CHS: 196 255 63 ¦ ¦ Sectors: 3149824 Disk Signature: 0xEE3EEE3E ¦ ¦ Partitions: 1 Partition Order: 1 ¦ ¦ Media Type: Fixed Interface: SCSI ¦ ¦ Description: Msft Virtual Disk ¦ +-----------------------------------------------------------------------------¦ ¦Pos Idx Type/Name Size Boot Hide Start Sector Total Sectors DL Vol Label ¦ +--- --- --------- ---- ---- ---- -------------- -------------- -- -----------¦ ¦ 1 1 07-NTFS 1.5G Yes No 63 3,148,677 F: <None> ¦ +-----------------------------------------------------------------------------+

    Read the article

  • Ubuntu 12.04 cloud edition on Amazon - Apache2 - /etc

    - by jdog
    I have setup a web server on Amazon with 3 Virtual hosts. For some reason I can't get any of the sites going on it, they all show a 404 error. /var/log/apache2/error.log shows "File does not exist: /etc/apache2/htdocs" I have checked: a2ensite all my virtual hosts actually checked softlinks in sites-enabled access rights in /var/www to 777, in case user is not www-data grep -r htdocs /etc/apache2 (returns nothing) ports.conf has NameVirtualHost directive exactly matching Virtual Hosts What else could this be? ports.conf # If you just change the port or add more ports here, you will likely also # have to change the VirtualHost statement in # /etc/apache2/sites-enabled/000-default # This is also true if you have upgraded from before 2.2.9-3 (i.e. from # Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and # README.Debian.gz NameVirtualHost 107.20.169.163:80 Listen 80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> sites-available/www.seleconlight.com <VirtualHost 107.20.169.163:80> ServerName www.seleconlight.com DocumentRoot /var/www/www.seleconlight.com CustomLog /var/log/apache2/www.seleconlight.com-access.log combined ErrorLog /var/log/apache2/www.seleconlight.com-error.log </VirtualHost>

    Read the article

  • access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

    - by Joel Alenchery
    Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely Accessing IP restricted server from dynamic IP which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was Static IP for dynamic IP the first answer seems exactly what I need but I dont know how I would go about doing the same on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

    Read the article

  • access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

    - by Joel Alenchery
    Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely http://serverfault.com/questions/187231/accessing-ip-restricted-server-from-dynamic-ip which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was http://serverfault.com/questions/136806/static-ip-for-dynamic-ip the first answer seems exactly what I need but I dont know how I would go about on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

    Read the article

  • Windows Server 2008 RAID10

    - by JT
    Hello All, I am building a storage system for myself. I have a 16 bay SATA chasis and right now I have 1 x 500GB SATA for booting 8 x 1.5TB for data. 3Ware 9500S-8 RAID card where these 8 drives above are connected to. I am used to linux, but not in the RAID department. I have Windows experience too. What I am looking for is something that I can just let sit, be reliable and use for other items as well. (Like running test websites, Apache, MySQL, etc). This box is private on a Class-C subnet. My thought is to at least consider Windows Server 2008. I especially like the potential for NON-GUI Mode. Can Windows Server 2008 do a Software RAID 10 out of the box? Software RAID is better performance and better in case the raid needs to be moved to another machine? I just want to SCP files, so OpenSSH running on it? Can one install the GUI, but not use it unless they get in a bind? Is Windows a good idea or should I stick to a Linux Software RAID or FreeBSD + ZFS?

    Read the article

  • IIS8 behind a VPN + Windows Server 2012 - how to properly bind IP+Port

    - by ryugen
    This is my first question so I hope I'm going to give you enough information. I'm running Windows Server 2012 within the Hyper-V environment of my Windows 8 machine. Within Windows Server 2012 I'm running a VPN tool based on openVPN to hide my real IP. When I run IIS8 with the VPN disconnected it works flawlessly through the Internet (port 80 forwarded correctly). But as soon as I connect to the VPN I can't reach my site through the domain anymore. Now I tried basically everything I know which is why I'm asking you guys. I tried binding IIS8 to the IP of my virtual ethernet card. I tried changing the priority of the NIC through the "Network and sharing center" via the advanced tab. I used ipconfig /flushdns in case there was something wrong in the DNS handling. Hell, I even turned off the Windows firewall. I also used a port scanner to verify the problem. The webserver is reachable on port 80 with VPN disconnected and immediately gets unreachable on connect. Theoretically both IPs (my regular one AND the VPN) should be reachable or at least not impair the other one right? Do you have any other suggestion? Do I have to route something somewhere somehow?

    Read the article

  • Windows 2008 R2 remote desktop - Double Login

    - by Zulgrib
    After an Active Directory fail RDP connection started to ask for credentials twice (once on local RDP program, second time on remote's logon screen) I already looked at Windows 2008 R2 RDS - Double Login Solution provided there doesn't work for me. The server is alone, without AD/DNS services, RDP service isn't installed I tried every security settings on RDP-Tcp (RDP, Negotiate, SLL) Logon option is set to "Use credentials from the client" Both windows client and server use RDP 7.1 fPromptForPassword regitries are set to 0 Local Computer Policy\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security\Always prompt for password upon connection is set to "Disabled" Why i am sure the problem comes from the server and not the client ? This problem affected a 3rd RDP program on Android too (it was directly showing "preparing desktop previously, on both MS RDP and the 3rd program) No bakcup are available (Else the Active Directory wouldn't be a fail, but just a lose of time) I am wondering if a rule linked to RDP got changed after the AD install+unistall, but i'm unable to find where. While this is not a critic problem, this is very annoying. I don't know if more information are needed, if it's the case and if you are patient enough, please tell me what is missing and i'll edit this post to add the missing informations.

    Read the article

  • IIS7 Session ID rotating with Classic ASP

    - by ManiacZX
    I am trying to migrate a Classic ASP app onto a Windows 2008 R2 server. The application features run fine, but I am having issue with session. The application keeps the logged in user information in session and I am constantly getting knocked out as if the session had expired. While debugging I have discovered the sessions are not expiring but instead I am getting 2-3 different Session IDs in use by one browser. I am outputting Response.Write(Session.SessionID) on various pages in the application and I can sit there and hit refresh over and over and watch the number changed between these 2-3 SessionIDs randomly. The sessions are still valid because when I refresh and get the Session ID that I logged in under the page is displayed (because the security check was successful) and when I get one of the other Session IDs I get the "you aren't logged in, you need to log in" message. If I close and re-open the browser, same story just the set of IDs are new. This happens with IE8, Firefox and Chrome from multiple computers. Things I've tried: - AppPool set to No Managed Code and Classic - Output Caching set .asp to never cache - ASP Session Properties enabled and disabled asp session state and confirmed it affected page (error trying to read Session.SessionID when disabled) Things I've tried just in case but shouldn't have anything to do with ASP Session: - Disabled compression - Changed ASP.Net Session State properties (InProc, StateServer, SQLServer, Cookies, URI, etc) -

    Read the article

  • Is my HDD dead forever?

    - by Roberto
    Yesterday I turned on my computer and it couldn't boot. I found out the hd (320GB SATA Seagate Momentus 7200.3 for notebook) was broken and it couldn't be recognized by the BIOS. I have another of the same hard drive, so I exchanged the boards. I found out that there is a problem on its board since my good hard drive didn't work. But the broken hard drive doesn't work with the good board as well: it can be recognized but when I insert a Windows Instalation DVD it says the hard drive is 0GB. I put it in a case and use it in another computer via USB, and but it doesn't show up in the "My Computer". I used a software to recover files called "GetDataBack for NTFS", it recognized the hard drive but with the wrong size (2TB). I try to make it read the hard drive but it got an I/O error reading sector. It tries to read, the hard drive spins up. So, since I'm using a good board on it, the problem seems to be internal. Is there anything someone could do to recover the files from it?

    Read the article

< Previous Page | 620 621 622 623 624 625 626 627 628 629 630 631  | Next Page >