Search Results

Search found 25093 results on 1004 pages for 'console output'.

Page 625/1004 | < Previous Page | 621 622 623 624 625 626 627 628 629 630 631 632  | Next Page >

• Is it safe to use an American power adapter in India and Australia?

  - by Stan

  I'm going to India and Australia on a business trip in a couple of days and plan to carry only a tablet instead of my trustworthy laptop (which got dunked in the tub by my oldest - don't ask). The adapter states the following: 100-240V~0.65A, 50/60Hz Output 12V===2A Will it be safe to use the adapter in these countries to charge my device, or do I have to buy new ones there? If the latter, what kind? What else should I take along with me? A surge protector?

  Read the article

• UFW blocking webrick on port 3000

  - by t Book

  On a ubuntu 10.0.4 server runs redmine. starting webrick with: ./server webrick -e production -b lvps46-173-79-113.dedicated.hosteurope.de -d makes redmine available in browser. as soon as we enable ufw, webrick can´t be accessed anymore. of course we allowed Port 3000 from anywhere ufw allow 3000/tcp ufw allow 3000/udp also a grep for iptables doesn´t show a deny rule iptables -nL | grep 3000 find the whole iptables output here http://pastebin.com/k6WNqdPU checking lsof -ni tcp:2222 tells me ruby is listening on port 3000 ruby 3457 root 5u IPv4 864846667 0t0 TCP 46.173.79.113:3000 (LISTEN) What else can we check? what´s wrong with the ufw rules for port 3000?

  Read the article

• Synced audio ouput on multiple machines? VLC? hardware solutions?

  - by zimmer62

  I'm wondering if there is any software or hardware solutions to synced audio or audio and video across multiple computers or devices on a network. I've seen Sonos, and it might be a good solution, but it's also a very expensive solution. I'd like to be able to play something with realtime audio output on one PC, but hear it on speakers throughout the house, being it the home theater receiver, or another computer in another room. I saw a solution using the apple iport express, but the latency was unacceptable for anything other than just music. I'd like to avoid running audio wires with baluns to a bunch of amplifiers scattered all over the place when I have cat5 run everywhere. Is anyone familiar with using this kind of process for whole home audio? The latency is a big deal for me, if I've got video attached to the sound (e.g. watching a hockey game)

  Read the article

• How to make vim display unicode

  - by Yitzchak

  I am trying to work with a utf-8 encoded xml file in vim 7.3 running on ubuntu. ASCII characters display normally but vim gives me gibberish instead of the unicode characters. After trying the following, I've reached the limits of my knowledge: 1) Checked that unicode was enabled by running set termencoding?. Output was termencoding=utf-8. 2) I installed the script from here (vim.org/scripts) 3) moved my ~/.vimrc file into ~/.vim 4) moved it back into ~ 5) followed the instructions in the accepted answer to this question. Is there some other variable I'm supposed to set? I know my system has the fonts I need. Update: Issue seems to be limited to html files for some reason.

  Read the article

• Multiple Monitors on One Screen

  - by Hulihan Applications

  Does anyone know of any software/hardware configuration that will allow you to preview/view the contents multiple monitors on one monitor? Let's pretend: I have two monitors hooked up to one pc, Monitor A and Monitor B. The monitors are not near each other. I'd like to be able to preview/see what's displaying on Monitor B on Monitor A I haven't been able to find much about this, but I imagine it may not currently be possible to access/emulate video output going out of a video port in software. However, wouldn't it be possible to capture display data generated by the OS kernel or data getting passed down to the display adapter driver?

  Read the article

• GL_INVALID_OPERATION in glEnd

  - by Killrazor

  Hello, I'm having problems drawing a simple sprite. When I draw: void CSprite2D::render() { CHECKGL(glLoadIdentity()); CHECKGL(glEnable(GL_TEXTURE_2D)); CHECKGL(glEnable(GL_BLEND)); CHECKGL(glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA)); m_texture->bind(); //CHECKGL(glPushMatrix()); CHECKGL(glBegin(GL_TRIANGLE_STRIP)); CHECKGL(glNormal3i(0,0,1)); CHECKGL(glTexCoord2f(m_textureAreaStart.s,m_textureAreaStart.t)); // 0,0 by default CHECKGL(glVertex3i(m_position.x,m_position.y,0)); CHECKGL(glNormal3i(0,0,1)); CHECKGL(glTexCoord2f(m_textureAreaEnd.s,m_textureAreaStart.t)); // 1,0 by default CHECKGL(glVertex3i( m_position.x + m_dimensions.x, m_position.y, 0)); CHECKGL(glNormal3i(0,0,1)); CHECKGL(glTexCoord2f(m_textureAreaEnd.s, m_textureAreaEnd.t)); // 1,1 by default CHECKGL(glVertex3i( m_position.x + m_dimensions.x, m_position.y + m_dimensions.y, 0)); CHECKGL(glNormal3i(0,0,1)); CHECKGL(glTexCoord2f(m_textureAreaStart.s, m_textureAreaEnd.t)); // 0,1 by default CHECKGL(glVertex3i( m_position.x, m_position.y + m_dimensions.y,0)); CHECKGL(glEnd()); //CHECKGL(glPopMatrix()); CHECKGL(glDisable(GL_BLEND)); } I'm always get an GL_INVALID_OPERATION in glEnd(). I suspect that error is not here, but I can't detect where may be. Actually, the output render seems ok. But I want to solve this situation before to catch a subtle bug tomorrow. Any idea of what could be

  Read the article

• how do I list Distribution Group (List) and their members inside of an OU using AD or exchange 2010

  - by wraak

  our entire domain has thousands of distribution groups, while i can use the script referenced here: How to get a list of all Distribution Lists and their Members in Exchange 2007? to pull all distribution groups and their members, it would be too hard to filter through all results. I particularilly need to pull either a. (preferred) all groups (both distribution and security) and their members inside of an OU (this particular OU contains over 100 hundred groups) or b. all groups and members matching a name starting with exampl* dsquery | dsget looks like could almost serve that purpose however when i did: dsquery group "OU=my-department,DC=blah,DC=blahblah,DC=com" -name * | dsget group -members (-expand) c:\my-department.txt it displays only the members without showing which group they belong to. The output I need should have: group name, members and potentially expanded sub-groups. i am still researching on how to get this done, seems like i can somehow make the above referenced script to search only inside of an OU, but i am not very familiar with powershell. any help would be appreciated, thank you.

  Read the article

• Accessing a broken mdadm raid

  - by CarstenCarsten

  Hi! I used a western digital mybookworld (SOHO NAS storage using Linux) as backup for my Linux box. Suddenly, the mybookworld does not boot up any more. So I opened the box, removed the hard disk and put the hard disk into an external USB HDD case, and connected it to my Linux box. [ 530.640301] usb 2-1: new high speed USB device using ehci_hcd and address 3 [ 530.797630] scsi7 : usb-storage 2-1:1.0 [ 531.794844] scsi 7:0:0:0: Direct-Access WDC WD75 00AAKS-00RBA0 PQ: 0 ANSI: 2 [ 531.796490] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 531.797966] sd 7:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 531.800317] sd 7:0:0:0: [sdc] Write Protect is off [ 531.800327] sd 7:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 531.800333] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803821] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803836] sdc: sdc1 sdc2 sdc3 sdc4 [ 531.815831] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.815842] sd 7:0:0:0: [sdc] Attached SCSI disk The dmesg output looks normal, but I was wondering why the hardisk was not mounted at all. And why there are 4 different partitions on it. fdisk showed the following: root@ubuntu:/home/ubuntu# fdisk /dev/sdc WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdc: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00007c00 Device Boot Start End Blocks Id System /dev/sdc1 4 369 2939895 fd Linux raid autodetect /dev/sdc2 370 382 104422+ fd Linux raid autodetect /dev/sdc3 383 505 987997+ fd Linux raid autodetect /dev/sdc4 506 91201 728515620 fd Linux raid autodetect Oh no! Everything seems to be created as a mdadm software raid. Calling mdadm --examine with the different partitions seems to affirm that. I think the only partition I am interested in, is /dev/sdc4 (because it is the largest). But nevertheless I called mdadm --examine with every partition. root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc1 /dev/sdc1: Magic : a92b4efc Version : 00.90.00 UUID : 5626a2d8:070ad992:ef1c8d24:cd8e13e4 Creation Time : Wed Feb 20 00:57:49 2002 Raid Level : raid1 Used Dev Size : 2939776 (2.80 GiB 3.01 GB) Array Size : 2939776 (2.80 GiB 3.01 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 1 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 4c90bc55 - correct Events : 16682 Number Major Minor RaidDevice State this 0 8 1 0 active sync /dev/sda1 0 0 8 1 0 active sync /dev/sda1 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc2 /dev/sdc2: Magic : a92b4efc Version : 00.90.00 UUID : 9734b3ee:2d5af206:05fe3413:585f7f26 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 104320 (101.89 MiB 106.82 MB) Array Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 2 Update Time : Wed Oct 27 20:19:08 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 55560b40 - correct Events : 9884 Number Major Minor RaidDevice State this 0 8 2 0 active sync /dev/sda2 0 0 8 2 0 active sync /dev/sda2 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc3 /dev/sdc3: Magic : a92b4efc Version : 00.90.00 UUID : 08f30b4f:91cca15d:2332bfef:48e67824 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 987904 (964.91 MiB 1011.61 MB) Array Size : 987904 (964.91 MiB 1011.61 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 3 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 39717874 - correct Events : 73678 Number Major Minor RaidDevice State this 0 8 3 0 active sync 0 0 8 3 0 active sync 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc4 /dev/sdc4: Magic : a92b4efc Version : 00.90.00 UUID : febb75ca:e9d1ce18:f14cc006:f759419a Creation Time : Wed Feb 20 00:57:55 2002 Raid Level : raid1 Used Dev Size : 728515520 (694.77 GiB 746.00 GB) Array Size : 728515520 (694.77 GiB 746.00 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 4 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 2f36a392 - correct Events : 519320 Number Major Minor RaidDevice State this 0 8 4 0 active sync 0 0 8 4 0 active sync 1 1 0 0 1 faulty removed If I read the output correctly everything was removed, because it was faulty. Is there ANY way to see the contents of the largest partition? Or seeing somehow which files are broken? I see that everything is raid1 which is only mirroring, so this should be a normal partition. I am anxious to do anything with mdadm, in fear that I destroy the data on the hard disk. I would be very thankful for any help.

  Read the article

• List files recursively and sort by modification time

  - by Problemaniac

  How do I list all files under a directory recursively and sort the output by modification time? I normally use ls -lhtc but it doesn't find all files recursively. I am using Linux and Mac. ls -l on Mac OS X can give -rw-r--r-- 1 fsr user 1928 Mar 1 2011 foo.c -rwx------ 1 fsr user 3509 Feb 25 14:34 bar.c where the date part isn't consistent or aligned, so a solution have to take this into account. Partial solution stat -f "%m%t%Sm %N" ./* | sort -rn | head -3 | cut -f2- works, but not recursively.

  Read the article

• How can I get Windows 7 to switch audio from a monitor (with built-in speakers) to headphones when t

  - by tnorthcutt

  I have an HP dv5t laptop running Windows 7 64 bit with an Acer H235H monitor connected to it via an HDMI cable. The monitor has built-in speakers, which are a huge improvement over the laptop's speakers. However, when I want to use headphones, right now, I have to connect them to the laptop, then right-click the sound icon in the task bar, select Playback Devices, right click the monitor, and disable it. Is there any way to get Windows 7 to automatically switch the output to the headphones when they're plugged in? That's the behavior that happens without the monitor attached (i.e. it will switch from the laptop speakers to headphones when headphones are plugged in). I have the same issue with a Sony Vaio laptop running Windows 7 64-bit and an identical monitor, for reference.

  Read the article

• Dump vim screen into a file

  - by user18151

  I need to dump whatever is seen on the vim screen as it is, with colors and everything. Is there a way do to id. I am hoping that ncurses uses the same escape sequence for colors as bash. So when I'll do cat on the file that I've dumped the screen to, I should get the same output as the vim file. I want to use it in the scenario when I am doing a side by side colorful diff of files and need to print them. If anyone knows of any other side-by-side colorful diff programs, please feel free to mention in the comments (not answers because I am hoping that this question will be answered so that it can be used by others).

  Read the article

• Windows command FOR /F isn't working?

  - by Mark Ransom

  I'm trying to use the FOR command in Windows XP's command line. I have a file temp.txt with 3 lines: temp1 temp2 temp3 And I'm typing the following command at the prompt: for /F %p in (temp.txt) do echo Testing %p Nothing comes back. If I remove the /F parameter, the output is Testing temp.txt. As far as I can determine, I'm using the command exactly as it is documented by Microsoft. I've checked my registry to make sure Command Extensions are on, and even started a new shell with cmd /e:on to be doubly sure. What am I doing wrong? Yes, I was doing something wrong. The file temp.txt wasn't created from scratch, I just edited it to put in my test content. Unfortunately when I created the file the first time, I saved it with a UTF-8 marker at the front. Recreating the file as plain text solved the problem.

  Read the article

• Need to hookup HP dv7-3085dx with NVIDIA GeForce GT 230M to my Dell 30 inch LCD 3007WFP at max resolution

  - by user14660

  I recently bought an HP laptop (dv7-3085dx) which is supposed to have a pretty good video card (NVIDIA GeForce GT 230M). The card is supposed to output a max resolution of 2560x1600 which is also the max resolution of my monitor. I've now bought an HDMI to dual link DVI cable - this is after Best Buy's 70 dollar HDMI to DVI (perhaps it was 'single' link?) didn't give me the best resolution. In Windows 7, when I try to set the max resolution for my 30" monitor, I only get 1280x800, which is absurd. The monitor is great, I love the laptop and the video card supposedly supports such resolutions. I therefore can't figure out why I'm not getting a better resolution. When I "detect" my monitor in Windows 7, it is shown correctly as a DELL 3007WFP!

  Read the article

• find directories in the current directory, older than 5 days and archive them

  - by user197284

  This is basic questions. I need to find folders in the current working directory(not recursively) and if they are older than 5 days archive them. zip or tar.gz is fine. I can find the folders with following commands find ./ -maxdepth 1 -type d -mtime +5 And i know i can pass this output of the find using xargs. But i do not know how to archive with folder name intact. That is the directory test1 should be archived to test1.zip and directory "test2" should be archived to "test2.zip". Any inputs are welcome. Regards

  Read the article

• RUNIT - created first service directory, "sv start testrun" does not work

  - by Veseliq

  I'm pretty new to runit. I installed it on a Ubuntu host. What I did: 1) created a dir testrun in /etc/sv 2) created a script run in /etc/sv/testrun/run, the script content: #! /bin/bash exec /root/FP/annotate-output python /root/FP/test.py | logger -t svtest 3) If I call directly /etc/sv/testrun/run it executes successfully 4) I run sv start testrun (or sv run testrun, sv restart testrun), all of them end up with the same error msg: fail: sv: unable to change to service directory: file does not exist Any ideas what am I doing wrong? I'm new to runit and base all my actions on the information found here: http://smarden.org/runit/

  Read the article

• How can I log the response header and body in apache?

  - by acme

  I need to determine whether the server (Apache 2) is returning the full contents of a page along with its correct header or not. I have a PHP-script that is executed successfully, but the browser is getting only half of the html content, it's simply cut off. The client infrastructure is pretty complicated, using Novell BorderManager Proxys and stuff. To ensure the server is doing its job fine I want to log both header and body of the reponse. How can I achieve this? I looked into the mod_log_config module of apache (which is already installed and ready to be used), but honestly I didn't quite manage to configure it to output header and body somewhere. edit: I managed to log the header with LogFormat "%h %l %u %t \"%r\" %s %b \"%{HEADER_NAME}o\"" common2 CustomLog /var/log/apache2/response.log common2 But unfortunately the mod_log_config formats don't support the whole content body. Can anyone help?

  Read the article

• How to handle notifications to several partial views of the same model?

  - by Seki

  I am working on refactoring an old simulation of a Turing machine. The application uses a class that contains the state and the logic of program execution, and several panels to display the tape representation and show the state, messages, and the GUI controls (start, stop, program listing, ...). I would like to refactor it using the MVC architecture that was not used originaly: the Frame is the only way to get access to the different panels and there is also a strong coupling between the "engine" class and the GUI updates in the way of frame.displayPanel.state.setText("halted"); or frame.outputPanel.messages.append("some thing"); It looks to me that I should put the state related code into an observable model class and make the different panels observers. My problem is that the java Observable class only provides a global notification to the Observers, while I would prefer not to refresh every Observers everytime, but only when the part that specificaly observe has changed. I am thinking of implementing myself several vectors of listeners (for the state / position, for the output messages, ...) but I feel like reinventing the wheel. I though also about adding some flags that the observers could check like isNewMessageAvailable(), hasTapeMoved(), etc but it sounds also approximative design. BTW, is it ok to keep the fetch / execute loop into the model or should I move it in another place? We can think in a theorical ideal way as I am completely revamping this small application.

  Read the article

• Configuring network to set wlan0 as primary

  - by Sheed

  I recently had to rebuild my pc and decided to go for ubuntu 14.04. I think the mistake I made was I started from a 12.04 install disk instead of the 12.10 disk I'd used previously and when given the option set my primary connection as ethernet (because the wireless option didn't work). After upgrading to 14.04 etc, I managed to get the wireless working, or more using steps like ifconfig -a and the likes I managed to prove that the wireless card etc. is all installed and working. However every time I boot without a hard wired connection plugged in I get the message "waiting for network configuration". I can then once it's booted without a network get my wirless working using sudo ifconfig wlan0 up iwlist wlan0 scan This seems to kick the wireless module into life and it appears in the GUI and I can then select a network, however all the options like edit network and disconnect etc are all greyed out. What I would like of course is if the WLAN0 was just set as my primary default network so I've been looking for a solution to this and it would seem that I need to adjust the old /etc/network/interfaces file but when I try to do so using the sudo vi /etc/network/interfaces command I, well I simply have no idea what I'm doing. Other than that typing :q! gets me out of there before I do to much damage! As far as I can tell (by navigating to the file in the GUI) the output of my /etc/network/interfaces is as follows: (obviously not including the " in each line that's just to break the heading rule of the #) "# This file describes the network interfaces available on your system "# and how to activate them. For more information, see interfaces(5). "# The loopback network interface auto lo iface lo inet loopback "# The primary network interface auto eth0 iface eth0 inet dhcp If this is the case then this clearly doesn't contain what it should do but I don't how to fix it. Nor do I even know if I'm on the right track. Any help would be appreciated thanks :)

  Read the article

• After upgrade to 12.04 wireless keeps dropping on BCM4312

  - by Sheket

  I know there are plenty of questions very similar to these, but I've tried practically everything and it still isn't working. Some solutions get the wireless connection working, but it goes very slow and drops after a few minutes. Then it won't reconnect and keeps asking for password. Hope you can help me. Thanks in advance. This is the output for sudo lshw -C network *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:f0300000-f0303fff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: c0 serial: 00:23:5a:9b:6e:b1 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.0.106 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:42 memory:f0200000-f023ffff ioport:a000(size=128) *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: 00:24:2c:83:f0:81 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-30-generic firmware=478.104 link=no multicast=yes wireless=IEEE 802.11bg And for lsmod | grep b43 b43 342643 0 mac80211 436455 1 b43 cfg80211 178679 2 b43,mac80211 bcma 25651 1 b43 ssb 50691 1 b43 And for rfkill list 5: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Boot failure on Ubuntu 11.04

  - by B Seven

  I was using my laptop with Ubuntu without problem for a few months. I did not update any software or install any OS updates. This morning when it started, I got error: no such device:.... error: no such disk error: you need to load the kernel first. Press any key to continue... Then takes me back to GRUB menu. Both Ubuntu option and recovery mode option show the same thing (above). What does this mean? How do I fix it? Since I did not install anything new, does it mean the SSD is dying (again)? How to check the SSD to and fix any file system errors? Ubuntu 11.04 EDIT: Just remembered something: when the system was shutting down, it did not turn off. There were a bunch of weird output statements, and I assumed the system had shut down so I turned it off with the power button. Perhaps something got corrupted because of that.

  Read the article

• Dual monitor, permission issue

  - by cenna75

  I had a dual monitor configuration going on for quite some time. One day, after moving the computer to another location and reconnecting everything, it changed such that I saw everything in double (being very much sober), I think it's called the 'mirrors' config. Anyway, from there on, there was nothing to be done through the system settings gui to change it back, as it wouldn't allow me to save any modification. The error I get when clicking 'save' is : "Failed to create file /home/me/monitors.xml.xxxxxx. Permission denied", xxxx being a random code, changing everytime. However, I can save all the configurations I want just fine by using the terminal, in my case: xrandr --output DVI-I-1 --right-of VGA-1 So I do have a workaround and this is therefore a question more out of curiosity. What could possibly have changed to make it impossible to do it through the gui and still letting me change the config using xrandr without being root? I'm having a hard time believing it could have anything to do with disconnecting/reconnecting the monitors... Any idea? Thanks !

  Read the article

• Total network data sent/received of a non-daemon Linux process?

  - by leden

  I'm looking for a simple and effective way of measuring total bytes received/sent from a single process upon its termination. Basically, I am looking for a tool which has the interface similar to "time" and "/usr/bin/time", e.g. measure-net-data <prog_to_run> <prog_args> Received (b): XYZ Sent (b): ABC I know that there are many tools for bandwidth/network monitoring, but as far I can tell all of them are performing the measurements it real-time, which is inappropriate not only because of overhead but also because of the inconvenience - I would need to stop the program, capture the output of the tool and then kill it. I have seen that newer versions of Linux 2.6.20+ provide /proc/<pid>/io/ which contain the information I'm looking for; however, everything under /proc/<pid> when the process terminates, so I'm again back to the same problem as with any network monitoring tool.

  Read the article

• nginx serves broken characters

  - by Andrew123321

  I have nginx 1.2.0-1 on debian 6.0.5. I have an empty file (let's say test.css). I add A and newline, works fine, B and newline, works fine,... D, works fine. I add E and I got three broken characters ("???"). When the file has got more content nginx would usually "cache" it and then output the cached file minus some characters plus some of these broken characters. Do you have any idea how to deal with this? Thank you

  Read the article

• Iptable Rule to redirect all traffic requesting a specific domain

  - by user548971

  I'm on a simple linux proxy. I'd like to add iptable rules to drop all requests for a specific domain. I figured I run a dig command to get the ip addresses for the domain and then add an iptable rule for each one. It seems, however, that it doesn't work to bind to more than one ip address. So, it seems I need to add ip ranges like this... iptables -I FORWARD -p tcp -m iprange --dst-range 66.220.144.0-66.220.159.255 --dport 443 -j DROP That seems to work. However, it has proven pretty problematic to parse the output of dig and correctly create the appropriate iptable rules. Is there a better way? Thanks! EV

  Read the article

• postfix + mysql, user unknown

  - by stoned

  I have installed postfix with dovecot and postfix admin and all seemed well at the beginning. I can log in with thunderbird and check the mailboxes (all empty now) and TRY to send mail, even TLS works. The problem comes when I try to send mail. This is the output of mail.log when I try to send mail from an address to the same address: Nov 23 16:41:55 mailforge postfix/local[6322]: 297792467C: to=, relay=local, delay=0.01, delays=0/0/0/0.01, dsn=5.1.1, status=bounced (unknown user: "test") Nov 23 16:41:55 mailforge postfix/qmgr[6293]: 297792467C: removed To me it looks like as if postfix tries to look for the user "test" while in the mysql database users are named as [email protected] . Where should I change this behaviour?

  Read the article

< Previous Page | 621 622 623 624 625 626 627 628 629 630 631 632  | Next Page >