Search Results

Search found 16891 results on 676 pages for 'custom cell'.

Page 626/676 | < Previous Page | 622 623 624 625 626 627 628 629 630 631 632 633  | Next Page >

• Windows Service Limit Crashes Services on Startup

  - by Paul Williams

  We have developed a custom Windows service in C# as part of a large Enterprise application. Our QA department tests multiple versions of this service. The QA lab has several (over 20) copies of this service installed on one Windows 2003 test box. Each copy is in its own folder and has a unique service name, though each executable file is named the same (OurWindowsService.exe, for example). Each service uses the same Windows credentials (a domain user). The purpose of this service is to handle MSMQ messages. The queued messages do all sorts of important stuff. For some reason, they can run only 5 of these services at a time. When we start a 6th, the service crashes on startup. For example, I can start #1, #2, #3, #4, and #5. When I start #6, it crashes. However, if I stop #1 and start #6, #6 runs fine, and now #1 fails to start. When the services crash, the following error appears in the Windows event log: Faulting application OurWindowsService.exe, version 5.40.1.1, faulting module kernel32.dll, version 5.2.3790.4480, fault address 0x0000bef7. I was able to use WinDbg to generate a postmortem dump file. The dump file revealed that the crash occurs trying to delay load SHLWAPI.dll: 0:000> kb100 ChildEBP RetAddr Args to Child 0012ece4 79037966 c06d007e 00000000 00000001 KERNEL32!RaiseException+0x53 0012ed4c 790099ba 00000008 0012ed08 7c82860c mscoree!__delayLoadHelper2+0x139 0012ed98 790075b1 001550c8 0012edac 0012fb34 mscoree!_tailMerge_**SHLWAPI_dll**+0xd 0012edb0 79007623 001550c8 0012edf8 0012edf4 mscoree!XMLGetVersionWithSupported+0x22 0012ee00 790069a4 aa06f1b0 00000000 000001fe mscoree!RuntimeRequest::GetRuntimeVersion+0x56 0012f478 790077aa 00000001 7903fb4c 0012fb34 mscoree!RuntimeRequest::ComputeVersionString+0x5bd 0012f89c 79007802 00000001 0012f8b4 7903fb4c mscoree!RuntimeRequest::FindVersionedRuntime+0x11c 0012f8b8 79007b19 00000001 00000000 aa06fa6c mscoree!RuntimeRequest::RequestRuntimeDll+0x2c 0012ffa4 79007c02 00000001 0012ffbc 00000000 mscoree!GetInstallation+0x72 0012ffc0 77e6f23b 00000000 00000000 7ffdf000 mscoree!_CorExeMain+0x12 0012fff0 00000000 79007bf0 00000000 78746341 KERNEL32!BaseProcessStart+0x23 I believe the error code handed to Kernel32.RaiseException, c06d007e, means Module Not Found, but I'm not certain. Does this sound familiar to anyone? Are we hitting some limit on the number of service instances on some file name? Does MSMQ dislike more than 5 listening services?

  Read the article

• Postfix to deliver mail to a virtual address mailbox

  - by Chloe

  Postfix version 2.6.6, Dovecot Version 2.0.9 I want to setup Postfix + Dovecot. Dovecot seems to be working. I can authenticate. However, the mailbox is empty! Nothing will get delivered! I followed many tutorials on Postfix + Dovecot but they seem to want to complicate things by using Dovecot LDA or MySQL. I just want it to be very simple and having Postfix deliver to the virtual mail boxes are fine. I don't need MySQL either. I already set up a custom password file that Dovecot uses for authentication and I can login to POP3 with SSL. I can see from the logs that Postfix is delivering to the system user accounts (the catch-all), instead of the virtual users that I set up in Dovecot. The SMTP + SSL authentication seems to work also. I can also see from the logs that Dovecot is checking the correct virtual mail folder. I just need to figure out how to get Postfix to deliver to the virtual mail boxes. I have the following which I believe are relevant. Let me know what other settings you need to see: alias_maps = hash:/etc/aliases mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = xxx.com myhostname = mail.xxx.com mynetworks = 99.99.99.99, 99.99.99.99 myorigin = $mydomain relay_domains = $mydestination, xxx.com, domain2.net, domain3.com sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = reject_non_fqdn_sender reject_non_fqdn_recipient reject_unknown_recipient_domain permit_sasl_authenticated check_relay_domains smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot smtpd_sender_restrictions = check_sender_mx_access cidr:/etc/postfix/bogus_mx reject_invalid_hostname reject_unknown_sender_domain reject_non_fqdn_sender virtual_mailbox_base = /var/spool/vmail virtual_mailbox_domains = xxx.com, domain2.net, domain3.com virtual_minimum_uid = 444 Postfix master.cf: submission inet n - - - - smtpd -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_sasl_type=dovecot -o smtpd_sasl_path=private/auth -o smtpd_sasl_security_options=noanonymous -o smtpd_sasl_local_domain=$myhostname -o smtpd_client_restrictions=permit_sasl_authenticated,reject -o smtpd_sender_login_maps=hash:/etc/postfix/virtual -o smtpd_sender_restrictions=reject_sender_login_mismatch -o smtpd_recipient_restrictions=reject_non_fqdn_recipient,reject_unknown_recipient_domain,permit_sasl_authenticated,reject Dovecot related: mail_location = maildir:~/Maildir passdb { args = /etc/dovecot/users.conf driver = passwd-file } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0660 user = postfix } } The virtual mail user: vmail:x:444:99:virtual mail users:/var/spool/vmail:/sbin/nologin Here is the /var/log/maillog when I try to send something to myself: Oct 25 22:10:05 308321 postfix/smtpd[2200]: connect from user-999.cable.mindspring.com[99.99.99.99] Oct 25 22:10:05 308321 postfix/smtpd[2200]: D224BD4753: client=user-999.cable.mindspring.com[99.99.99.99], sasl_method=LOGIN, [email protected] Oct 25 22:10:06 308321 postfix/cleanup[2207]: D224BD4753: message-id=<7DC3C163CFFC483AB6226F8D3D9969D2@dumbopc> Oct 25 22:10:06 308321 postfix/qmgr[2168]: D224BD4753: from=<[email protected]>, size=1385, nrcpt=1 (queue active) Oct 25 22:10:06 308321 postfix/smtpd[2200]: disconnect from user-999.cable.mindspring.com[99.99.99.99] Oct 25 22:10:06 308321 postfix/local[2208]: D224BD4753: to=<[email protected]>, orig_to=<[email protected]>, relay=local, delay=1.1, delays=0.53/0.02/0/0.51, dsn=2.0.0, status=sent (delivered to mailbox) Oct 25 22:10:06 308321 postfix/qmgr[2168]: D224BD4753: removed

  Read the article

• How to keep group-writeable shares on Samba with OSX clients?

  - by Oliver Salzburg

  I have a FreeNAS server on a network with OSX and Windows clients. When the OSX clients interact with SMB/CIFS shares on the server, they are causing permission problems for all other clients. Update: I can no longer verify any answers because we abandoned the project, but feel free to post any help for future visitors. The details of this behavior seem to also be dependent on the version of OSX the client is running. For this question, let's assume a client running 10.8.2. When I mount the CIFS share on an OSX client and create a new directory on it, the directory will be created with drwxr-x-rx permissions. This is undesirable because it will not allow anyone but me to write to the directory. There are other users in my group which should have write permissions as well. This behavior happens even though the following settings are present in smb.conf on the server: [global] create mask= 0666 directory mask= 0777 [share] force directory mode= 0775 force create mode= 0660 I was under the impression that these settings should make sure that directories are at least created with rwxrwxr-x permissions. But, I guess, that doesn't stop the client from changing the permissions after creating the directory. When I create a folder on the same share from a Windows client, the new folder will have the desired access permissions (rwxrwxrwx), so I'm currently assuming that the problem lies with the OSX client. I guess this wouldn't be such an issue if you could easily change the permissions of the directories you've created, but you can't. When opening the directory info in Finder, I get the old "You have custom access" notice with no ability to make any changes. I'm assuming that this is caused because we're using Windows ACLs on the share, but that's just a wild guess. Changing the write permissions for the group through the terminal works fine, but this is unpractical for the deployment and unreasonable to expect from anyone to do. This is the complete smb.conf: [global] encrypt passwords = yes dns proxy = no strict locking = no read raw = yes write raw = yes oplocks = yes max xmit = 65535 deadtime = 15 display charset = LOCALE max log size = 10 syslog only = yes syslog = 1 load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes smb passwd file = /var/etc/private/smbpasswd private dir = /var/etc/private getwd cache = yes guest account = nobody map to guest = Bad Password obey pam restrictions = Yes # NOTE: read smb.conf. directory name cache size = 0 max protocol = SMB2 netbios name = freenas workgroup = COMPANY server string = FreeNAS Server store dos attributes = yes hostname lookups = yes security = user passdb backend = ldapsam:ldap://ldap.company.local ldap admin dn = cn=admin,dc=company,dc=local ldap suffix = dc=company,dc=local ldap user suffix = ou=Users ldap group suffix = ou=Groups ldap machine suffix = ou=Computers ldap ssl = off ldap replication sleep = 1000 ldap passwd sync = yes #ldap debug level = 1 #ldap debug threshold = 1 ldapsam:trusted = yes idmap uid = 10000-39999 idmap gid = 10000-39999 create mask = 0666 directory mask = 0777 client ntlmv2 auth = yes dos charset = CP437 unix charset = UTF-8 log level = 1 [share] path = /mnt/zfs0 printable = no veto files = /.snap/.windows/.zfs/ writeable = yes browseable = yes inherit owner = no inherit permissions = no vfs objects = zfsacl guest ok = no inherit acls = Yes map archive = No map readonly = no nfs4:mode = special nfs4:acedup = merge nfs4:chown = yes hide dot files force directory mode = 0775 force create mode = 0660

  Read the article

• Poor performance of single processor 32bit Windows XP xompared SMP in VBA+Excel

  - by Adam Ryczkowski

  Welcome! On many computers I experienced poor performance of 32 bit guests running on 64 bit Linux host (I used only the Debian family). At last I managed to collect benchmark data. I made the benchmark by running custom VBA macro, (which we use in our company) that generates 284 pages long Word document full of Excel Pie charts, tables and comments. The macro is run as a single task (excluding the standard services) on a set of identically configured Windows XP 32-bit systems. I measured the time (in sec.) needed to perform the test. The computer (i.e. my notebook Asus P53E) supports both VT-d extensions and native Windows XP. It has 2-core processor, each core is hyperthreaded, so in total we have 4 mostly independent execution units. I use the latest VirtualBox 4.2 and VMWare Workstation 9.0 for Linux, installed together on the same host (running Mint 13 Maya) but never run simultaneously. The results (in column Time) are no less accurate than ± 10% Here are the results (sorry for the format, but I couldn't find out a better solution for tables in SO): +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | Host software | # processor | Windows kernel | IO APIC | VT-x/AMD-V | 2D Video Accel | Time | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 0 | 1139 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 1 | 1050 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 0 | 1 | 1644 | | VirtualBox | 4 | ACPI Multiprocessor PC | 1 | 1 | 1 | 6809 | | VMWare | 1 | ACPI Uniprocessor PC | | 1 | 1 | 1175 | | VMWare | 4 | ACPI Multiprocessor PC | | 1 | 1 | 3412 | | Native | 4 | ACPI Multiprocessor PC | | | | 1693 | | Native | 1 | Advanced Configuration and Power Interface (ACPI) PC | | | | 1170 | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ Here are the striking conclusions: Although I've read in the VirtualBox fora about abysmal performance with 32-bit guest on 64-bit host, VMWare also has problems compared to native run, still being twice faster(!) than VBox. Although VBA is inherently single-threaded, the Excel calculations, which take much more than a half of total computation time, supposedly aren't. So one would expect some speed gain when running on 2+ cores ("+" for hyperthreading). What we see is a speed loss. And quite big one too. For the VirtualBox the VT-d extension isn't a big deal. Can anyone shed some light on why the singlethreaded Windows kernel is so much faster than the SMP one?

  Read the article

• BIND DNS server (Windows) - Unable to access my local domain from other computers on LAN

  - by Ricardo Saraiva

  I have a BIND DNS server running on my Windows 7 development machine and I'm serving pages with WAMPSERVER. My ideia is to develop some tools (in PHP) for my intranet at work and I want them to be accessible via LAN in this format: http://tools.mycompany.com I've already placed BIND and I can access http://tools.mycompany.com on the machine that holds BIND server, but I cannot access it from other LAN computers. I've done the following on my router: defined static IP's for all LAN computers set Port Forwarding to my server (remember: it serves DNS and Web pages) set DNS server configuration to point to my LAN server On LAN computers, I went to Local Area Network properties and also changed the DNS server IP in order to point to my local DNS server. If it helps, here is my named.conf file: options { directory "c:\windows\SysWOW64\dns\etc"; forwarders {127.0.0.1; 8.8.8.8; 8.8.4.4;}; pid-file "run\named.pid"; allow-transfer { none; }; recursion no; }; logging{ channel my_log{ file "log\named.log" versions 3 size 2m; severity info; print-time yes; print-severity yes; print-category yes; }; category default{ my_log; }; }; zone "mycompany.com" IN { type master; file "zones\db.mycompany.com.txt"; allow-transfer { none; }; }; key "rndc-key" { algorithm hmac-md5; secret "qfApxn0NxXiaacFHpI86Rg=="; }; controls { inet 127.0.0.1 port 953 allow { 127.0.0.1; } keys { "rndc-key"; }; }; ...and a single zone I've defined - file db.mycompany.com.txt: $TTL 6h @ IN SOA tools.mycompany.com. hostmaster.mycompany.com. ( 2014042601 10800 3600 604800 86400 ) @ NS tools.mycompany.com. tools IN A 192.168.1.4 www IN A 192.168.1.4 On the file above 192.168.1.4 is the IP of the local machine inside my LAN. Can someone help me here? I need my web pages to be accessible from other computers inside my LAN using my custom domain name. I've tried on other computers and they can access my server via http://192.168.1.4/, but no able when using http://tools.mycompany.com . Please, consider the following: I'm completely new to BIND I have basic knowledge in Apache configuration Thanks a lot for your help.

  Read the article

• What are incentives (if any) to use WinRT instead of .Net?

  - by Ark-kun

  Let's compare WinRT with .Net .Net .Net is the 13+ years evolution of COM. Three main parts of .Net are execution environment, standard libraries and supported languages. CLR is the native-code execution environment based on COM .Net Framework has a big set of standard libraries (implemented using managed and native code) that can be used from all .Net languages. There are .Net classes that allow using OS APIs. WPF or Silverlight provide a XAML-based UI framework .Net can be used with C++, C#, Javascript, Python, Ruby, VB, LISP, Scheme and many other languages. C++/.Net is a variation of the C++ language that allows interaction with .Net objects. .Net supports inheritance, generics, operator and method overloading and many other features. .Net allows creating apps that run on Windows (XP, 7, 8 Pro (Desktop and Metro), RT, CE, etc), Mac OS, Linux (+ other *nix); iOS, Android, Windows Phone (7, 8); Internet Explorer, Chrome, Firefox; XBox 360, Playstation Suite; raw microprocessors. There is support for creating games (2D/3D) using any managed language or C++. Created by Developer Division WinRT WinRT is based on COM. Three main parts of WinRT are execution environment, standard libraries and supported languages. WinRT has a native-code execution environment based on COM WinRT has a set of standard libraries that more or less can be used from WinRT languages. There are WinRT classes that allow using OS APIs. Unnamed Silverlight clone provides a XAML-based UI framework WinRT can be used with C++, C#, Javascript, VB. C++/CX is a variation of the C++ language that allows interaction with WinRT objects. Custom WinRT components don't support inheritance (classes must be sealed), generics, operator overloading and many other features. WinRT allows creating apps that run on Windows 8 Pro and RT (Metro only); Windows Phone 8 (limited). There is support for creating games (2D/3D) using C++ only. Ordered by Windows Team I think that all the aspects except the last ones are very important for developers. On the other hand it seems that the most important aspect for Microsoft is the last one. So, given the above comparison of conceptually identical technologies, what are incentives (if any) to use WinRT instead of .Net?

  Read the article

• TFS2010 Hangs “Waiting for Build Agent”

  - by Qpirate

  I have asked this question over on SO the link to the question is here but i am hoping this is a better place to ask it. I have 3 VM's each running the TFS Build Host Service 1 has 1 controller and 1 agent 2 have 2 Build Agents each. Most of the time (7\10 builds) it comes back with the following error message TF215097: An error occurred while initializing a build for build definition BUILD_DEFINITION: There was no endpoint listening at http://MACHINE1:9191/Build/v3.0/Services/Controller/14 that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. and there is no errors when i do get this message. the following is the config file that i have created <configuration> <appSettings> <add key="traceWriter" value="true"/> </appSettings> <system.diagnostics> <switches> <add name="BuildServiceTraceLevel" value="4"/> <add name="API" value="4"/> <add name="Authentication" value="4"/> <add name="Authorization" value="4"/> <add name="Database" value="4"/> <add name="General" value="4"/> <add name="traceLevel" value="4"/> </switches> <trace autoflush="true" indentsize="4"> <listeners> <add name="myListener" type="Microsoft.TeamFoundation.TeamFoundationTextWriterTraceListener,Microsoft.TeamFoundation.Common, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" initializeData="c:\logs\TFSBuildServiceHost.exe.log" /> <remove name="Default" /> </listeners> </trace> </system.diagnostics> </configuration> I do have my own custom activities in my build process but this does not seem to be a problem as sometimes the build actually does go. I have tried refreshing the template as some sites suggest. Has anyone come across a solution for this problem? or can anyone tell me how to catch these errors when they happen?

  Read the article

• Monitoring tools that can take high rate and high volume?

  - by Jon Watte

  We're using Cacti with RRDTool to monitor and graph about 100,000 counters spread across about 1,000 Linux-based nodes. However, our current setup generally only gives us 5-minute graphs (with some data being minute-based); we often make changes where seeing feedback in "near real time" would be of value. I'd like approximately a week of 5- or 10-second data, a year of 1-minute data, and 5 years of 10-minute data. I have SSD disks and a dual-hexa-core server to spare. I tried setting up a Graphite/carbon/whisper server, and had about 15 nodes pipe to it, but it only has "average" for the retention function when promoting to older buckets. This is almost useless -- I'd like min, max, average, standard deviation, and perhaps "total sum" and "number of samples" or perhaps "95th percentile" available. The developer claims there's a new back-end "in beta" that allows you to write your own function, but this appears to still only do 1:1 retention (when saving older data, you really want the statistics calculated into many streams from a single input. Also, "in beta" seems a little risky for this installation. If I'm wrong about this assumption, I'd be happy to be shown my error! I've heard Zabbix recommended, but it puts data into MySQL or some other SQL database. 100,000 counters on a 5 second interval means 20,000 tps, and while I have an SSD, I don't have an 8-way RAID-6 with battery backup cache, which I think I'd need for that to work out :-) Again, if that's actually something that's not a problem, I'd be happy to be shown the error of my ways. Also, can Zabbix do the single data stream - promote with statistics thing? Finally, Munin claims to have a new 2.0 coming out "in beta" right now, and it boasts custom retention plans. However, again, it's that "in beta" part -- has anyone used that for real, and at scale? How did it perform, if so? I'm almost thinking about using a graphing front-end (such as Graphite) and rolling my own retention backend with a simple layer on top of mmap() and some stats. That wouldn't be particularly hard, and would probably perform very well, letting the kernel figure out the balance between frequency of flushing to disk and process operations. Any other suggestions I should look into? Note: it has to have shown itself able to sustain the kinds of data loads I'm suggesting above; if you can point at the specific implementation you're referencing, so much the better!

  Read the article

• Diff 2 files while ignoring parts of lines

  - by Millianz

  I would like to diff a file system. Currently my bash script prints out the file system recursively into a file (ls -l -R) and diffs it with an expected output. An example for a line in this file would be: drw---- 100000f3 00000400 0 ./foo/ My current diff command is diff "$TEMP_LOG" "$DIFF_FILE_OUT" --strip-trailing-cr --changed-group-format='%' --unchanged-group-format='' "$SubLog" As you can see I ignore additional lines in the current output file, I only care about lines that match with the master output. I now have the problem though that some files may differ in size, or a folder might even have a different name, but due to it's location I know what access rights it should have. For example: Output: ------- 00000000 00000000 528 ./foo/bar.txt Master: ------- 00000000 00000000 200 ./foo/bar.txt Only the size differs here, and it doesn't matter, I would like to just ignore certain parts of the diff, kind of like an ansi c comment. Master: ------- 00000000 00000000 /*200*/ ./foo/bar.txt -- OR -- Master: d------ 00000000 00000000 /*10*/ ./foo//*123123*///*76456546*//bar.txt Output: d------ 00000000 00000000 0 ./foo/asd/sdf/bar.txt And still have it diff correctly. Is this even possible with diff, or will I have to write a custom script for it? Since I'm fairly new to cygwin I might be using the completely wrong tool all together, I'm happy for any suggestions. Update: Taking a step back, here is the general task at hand that I want to achieve. I want to write a script that checks the file system to see if the read/write permissions are set up correctly. The structure of the file system is under my control, so I don't have to worry about it changing too much. Sometimes folders/files might not be present, but if they are their permissions must be checked. For Example assume that the following is a snapshot of the current file system structure drw ./foo drw ./foo/bar -rw ./foow/bar/bar.txt drw ./foo/baz -rw ./foo/baz/baz.txt And this is what the file system structure might dictate, i.e. if these folders / files are present, the permissions must match. drw ./foo drw ./foo/bar -rw ./foo/bar/bar.txt --- ./foo/bar/foobar.txt drw ./foo/baz -rw ./foo/baz/foobaz.txt In this case the file system checked out ok, since all files present match their expected values. The situation becomes more complicated as soon as certain folders might have any arbitrary name, only due to their location I know what their permissions should be. Assume that the directory ./foo/bar in the above example might be such a case, i.e. instead of bar the folder could have any name, but still match the -rw permissions. This seems like a very complicated situation, and I'm not even sure if I can solve it with bash scripting alone. I might have to write an actual application.

  Read the article

• How to encrypt dual boot windows 7 and xp (bitlocker, truecrypt combo?) on sdd (recommended?)

  - by therobyouknow

  I would like to setup a dual boot Windows 7 and Windows XP laptop/notebook computer where each operation system's partition is fully encrypted. I would like to do this on a SSD - a 128Gb Crucial M4. My research Dual boot of truecrypt encrypted OSs on one drive (not possible - in Truecript 7.x at time of writing) This cannot be done on a standard Truecrypt setup - it will only support encrypting one of the operating systems. I have tried this and also read about it here on superuser.com However, I did see a solution here that uses grub4dos as the initial bootloader to chain to separate truecrypt encrypted OSs, in my case Windows 7 and Windows XP: http://yyzyyz.blogspot.co.uk/2010/06/truecrypt-how-to-encrypt-multiple.html I am not going to consider this solution as it relies upon some custom code for use in the bootloader that is provided by the author. I would prefer a solution that can be fully understood so that I can be sure that there is nothing undesirable occuring (i.e. malware or just simply bugs in the code). I would like to believe such a solution doesn't have those risks but I can't be sure. BitLocker and Truecrypt combination - possible solution? So I am now considering a combination of encryption programs: I now aim to encrypt Windows XP with Truecrypt and Windows 7 with BitLocker. Assuming Truecrypt bootloader can boot into non-Truecrypt OSs (e.g. via hitting Escape to go to another menu), then this solution may be viable. SSDs and Encryption (use fastest possible spinning hard disk instead (?)) I read on various superuser.com posts and elsewhere that current SSDs are not suited to whole drive encryption for various reasons: impact of performance algorithms that give SSDs advantage over spinning harddisks. Algorithms used in compression of data for example. Wear on the SSD, shortening its life Security issues whereby data is repeated, as indicated in some Truecrypt documentation So I am now considering not using SSD. But with the aim to have the fastest drive possible, I am considering using the Western Digital Scorpion black 2.5" 7200rpm harddisk as this appears to be top rated among spinning platter-based harddrives (don't work for Western Digital). Summary So to achieve whole drive encrypted dual boot Windows 7 and Windows XP with minimal performance impact I intend to use a combination of Truecrypt and Bitlocker on a top-rated conventional spinning platter-based harddisk. Questions Will my summary: achieve whole disk encryption of the dual-boot Windows XP, Windows 7? OR an you suggest a simpler solution, including one that only requires only Truecrypt (BitLocker not available on XP). Or another encryption tool, including paid-for? provide the highest performance. Am I correct to avoid using SDD with encryption for the reasons I discovered? Are the concerns about SSDs and encryption still very real (some articles I read go back to 2010) Thanks for your input!

  Read the article

• Google analytics and multiple independent subdomains

  - by MTilsted

  I need some help trying to setup google analytics correct. Here is my setup: We host sites for multiple customers, and each customer have their own subdomain on our site. So we have customerA.oursite.com and customerB.oursite.com As we add more customers we get more subdomains. We do want to track all data for each customer independent, but I don't want to to create a new google tracking code for each new customer. So my plan is to track all visits with "oursite.com", and then I will create a filter in google Analytics to get data for each specific customer(All visits for a specific subdomain). Is this(One tracking code, and a subdomain filter) the right way to do it? To create a subdomain filter i add a new profile for each customer, and then add a custom filter saying include "Request URI" and fill in "CustomerDomain.oursite.com". Is this the correct way to do it? And a general question about filters: Is it really impossible to create a new filter by applying it to data in an existing profile? I would really like to just collect all the data in one "main" profile and then create subdomain filters as we need them. But it seems that google only apply filters to new incomming data, not existing data. Is this really true? The following is my tracking code. Is '_setDomainName','none' the right thing to do? <script type="text/javascript"> /* Tracking code for qrtown.com */ var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-11584298-10']); _gaq.push(['_setDomainName', 'none']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); </script>

  Read the article

• Apache returns 403 Forbidden for alternative port vhost

  - by Wesley

  I'm having an issue getting vhosts to work on Apache 2.2, Debian 6. I have two VirtualHosts, one on port 80 and one on port 8888. The port 80 one has been created automatically by DirectAdmin, the 8888 is a custom one. It's configuration is as follows. <VirtualHost *:8888 > DocumentRoot /home/user/public_html/development ServerName www.myserver.nl ServerAlias myserver.nl <Directory "/home/user/public_html/development"> Options +Indexes +FollowSymLinks +MultiViews AllowOverride All Order Allow,deny Allow from all </Directory> </VirtualHost> Of course I also have a NameVirtualHost *:8888 The port 80 DocumentRoot is /home/user/public_html/production, which is perfectly accessible and works like a charm. The port 8888 docroot of /home/user/public_html/development is 403 forbidden though. I have compared the permissions for both folders. They seem fine to me. drwxr-xr-x 2 root root 4096 Aug 17 16:14 development drwxr-xr-x 4 root root 4096 Aug 18 04:29 production Also, the index.php file which is supposed to display when accessing through port 8888, located in /development/: -rwxr-xr-x 1 root root 41 Aug 17 16:14 index.html I have looked at my error_log and found many of the following entries, only being added to the log file when accessing through port 8888. [Sat Aug 18 04:35:09 2012] [error] [client 27.32.156.232] Symbolic link not allowed or link target not accessible: /home/user/public_html /home/user/public_html is a symbolic link that refers to /home/user/domains/mydomain/public_html. The symbolic link has the following permissions: lrwxrwxrwx 1 admin admin 29 Aug 17 15:56 public_html -> ./domains/mydomain/public_html I'm at a loss. It seems that everything is readable or executable. I've set the Directory to FollowSymLinks in the httpd.conf file, but that doesn't seem to make a difference. If I change that directory tag to <Directory "/home/admin/public_html"> (so it has FollowSymLinks on that as well) it still does not work. Any help is greatly appreciated. If I need to post more information, let me know. I'm pretty much a beginner at this stuff. .. .. UPDATE: I ended up changing the configuration to directly go to the actual path of the files, avoiding the public_html symlink altogether. That worked. Thanks for the suggestions folks. DocumentRoot /home/user/domains/mydomain/public_html/development instead of DocumentRoot /home/user/public_html/development

  Read the article

• recommendations for efficient offsite remote backup solution of vm's

  - by senorsmile

  I am looking for recommendations for backing up my current 6 vm's(and soon to grow to up to 20). Currently I am running a two node proxmox cluster(which is a debian base using kvm for virtualization with a custom web front end to administer). I have two nearly identical boxes with amd phenom II x4's and asus motherboards. Each has 4 500 GB sata2 hdd's, 1 for the os and other data for the proxmox install, and 3 using mdadm+drbd+lvm to share the 1.5 TB's of storage between the two machines. I mount lvm images to kvm for all of the virtual machines. I currently have the ability to do live transfer from one machine to the other, typically within seconds(it takes about 2 minutes on the largest vm running win2008 with m$ sql server). I am using proxmox's built-in vzdump utility to take snapshots of the vm's and store those on an external harddrive on the network. I then have jungledisk service (using rackspace) to sync the vzdump folder for remote offsite backup. This is all fine and dandy, but it's not very scalable. For one, the backups themselves can take up to a few hours every night. With jungledisk's block level incremental transfers, the sync only transfers a small portion of the data offsite, but that still takes at least a half an hour. The much better solution would of course be something that allows me to instantly take the difference of two time points (say what was written from 6am to 7am), zip it, then send that difference file to the backup server which would instantly transfer to the remote storage on rackspace. I have looked a little into zfs and it's ability to do send/receive. That coupled with a pipe of the data in bzip or something would seem perfect. However, it seems that implementing a nexenta server with zfs would essentially require at least one or two more dedicated storage servers to serve iSCSI block volumes (via zvol's???) to the proxmox servers. I would prefer to keep the setup as minimal as possible (i.e. NOT having separate storage servers) if at all possible. I have also briefly read about zumastor. It looks like it could also do what I want, but it appears to have halted development in 2008. So, zfs, zumastor or other?

  Read the article

• VPN Connection Causes Internal LAN Connection Loss with Server

  - by sleepisfortheweak

  I've tried configuring basic PPTP VPN at my small business using a number of different tutorials. As far as I can tell, the actual VPN connection worked fine, but upon connecting a client, the Server 'disappears' from the internal LAN. The RRAS service must be stopped before the connection is restored. My Setup: The network is simply a DSL Gateway/Router to the outside functioning as NAT/Firewall/DHCP. The server is a Win Server 2008 machine at fixed IP 192.168.1.200. The server has 1 NIC, so I used the 'custom' option when configuring RRAS. The RRAS settings should be default except that I've disabled ports for connection types I'm not using and reduced PPTP ports to 10. I've also created an address pool and disabled DHCP packet forwarding. The server only functions as a File Share and now a VPN Server. Local LAN computers all have mapped network shares to the server authenticated based on Local User/Group setup on the server. The Problem: The moment a client connects through VPN, the server 'disappears' from the local network. All mapped drives disconnect and there is no response to a ping 192.168.1.200. Even if the client disconnects, the server does not re-appear at that address until the RRAS service is stopped. I've Tried: Using an Address Pool inside and outside the local subnet. Using DCHP Relay Checking Inbound/Outbound filters (none enabled) The fact that nothing I've tried has had any effect, and that I can connect and successfully obtain an IP tells me that it's something more fundamental I'm missing. My gut tells me that it's something to do with the second IP address added by the VPN client somehow taking over the interface or traffic from the local LAN accidently getting routed to the VPN client instead of handled at the server once RRAS has become 'active' when a client connects. Hopefully this may be obvious to someone with real IT experience. I've been doing this a while and almost never been stumped. I'm starting to think it might actually be something tricky since my setup is pretty basic yet refuses to work. I'll be happy to include more info if this doesn't ring any bells right away for anyone. Thanks

  Read the article

• How to open a server port outside of an OpenVPN tunnel with a pf firewall on OSX (BSD)

  - by Timbo

  I have a Mac mini that I use as a media server running XBMC and serves media from my NAS to my stereo and TV (which has been color calibrated with a Spyder3Express, happy). The Mac runs OSX 10.8.2 and the internet connection is tunneled for general privacy over OpenVPN through Tunnelblick. I believe my anonymous VPN provider pushes "redirect_gateway" to OpenVPN/Tunnelblick because when on it effectively tunnels all non-LAN traffic in- and outbound. As an unwanted side effect that also opens the boxes server ports unprotected to the outside world and bypasses my firewall-router (Netgear SRX5308). I have run nmap from outside the LAN on the VPN IP and the server ports on the mini are clearly visible and connectable. The mini has the following ports open: ssh/22, ARD/5900 and 8080+9090 for the XBMC iOS client Constellation. I also have Synology NAS which apart from LAN file serving over AFP and WebDAV only serves up an OpenVPN/1194 and a PPTP/1732 server. When outside of the LAN I connect to this from my laptop over OpenVPN and over PPTP from my iPhone. I only want to connect through AFP/548 from the mini to the NAS. The border firewall (SRX5308) just works excellently, stable and with a very high throughput when streaming from various VOD services. My connection is a 100/10 with a close to theoretical max throughput. The ruleset is as follows Inbound: PPTP/1723 Allow always to 10.0.0.40 (NAS/VPN server) from a restricted IP range >corresponding to possible cell provider range OpenVPN/1194 Allow always to 10.0.0.40 (NAS/VPN server) from any Outbound: Default outbound policy: Allow Always OpenVPN/1194 TCP Allow always from 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) OpenVPN/1194 UDP Allow always to 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) Block always from NAS to any On the Mini I have disabled the OSX Application Level Firewall because it throws popups which don't remember my choices from one time to another and that's annoying on a media server. Instead I run Little Snitch which controls outgoing connections nicely on an application level. I have configured the excellent OSX builtin firewall pf (from BSD) as follows pf.conf (Apple App firewall tie-ins removed) (# replaced with % to avoid formatting errors) ### macro name for external interface. eth_if = "en0" vpn_if = "tap0" ### wifi_if = "en1" ### %usb_if = "en3" ext_if = $eth_if LAN="{10.0.0.0/24}" ### General housekeeping rules ### ### Drop all blocked packets silently set block-policy drop ### all incoming traffic on external interface is normalized and fragmented ### packets are reassembled. scrub in on $ext_if all fragment reassemble scrub in on $vpn_if all fragment reassemble scrub out all ### exercise antispoofing on the external interface, but add the local ### loopback interface as an exception, to prevent services utilizing the ### local loop from being blocked accidentally. ### set skip on lo0 antispoof for $ext_if inet antispoof for $vpn_if inet ### spoofing protection for all interfaces block in quick from urpf-failed ############################# block all ### Access to the mini server over ssh/22 and remote desktop/5900 from LAN/en0 only pass in on $eth_if proto tcp from $LAN to any port {22, 5900, 8080, 9090} ### Allow all udp and icmp also, necessary for Constellation. Could be tightened. pass on $eth_if proto {udp, icmp} from $LAN to any ### Allow AFP to 10.0.0.40 (NAS) pass out on $eth_if proto tcp from any to 10.0.0.40 port 548 ### Allow OpenVPN tunnel setup over unprotected link (en0) only to VPN provider IPs ### and port ranges pass on $eth_if proto tcp from any to a.b.8.0/24 port 1194:1201 ### OpenVPN Tunnel rules. All traffic allowed out, only in to ports 4100-4110 ### Outgoing pings ok pass in on $vpn_if proto {tcp, udp} from any to any port 4100:4110 pass out on $vpn_if proto {tcp, udp, icmp} from any to any So what are my goals and what does the above setup achieve? (until you tell me otherwise :) 1) Full LAN access to the above ports on the mini/media server (including through my own VPN server) 2) All internet traffic from the mini/media server is anonymized and tunneled over VPN 3) If OpenVPN/Tunnelblick on the mini drops the connection, nothing is leaked both because of pf and the router outgoing ruleset. It can't even do a DNS lookup through the router. So what do I have to hide with all this? Nothing much really, I just got carried away trying to stop port scans through the VPN tunnel :) In any case this setup works perfectly and it is very stable. The Problem at last! I want to run a minecraft server and I installed that on a separate user account on the mini server (user=mc) to keep things partitioned. I don't want this server accessible through the anonymized VPN tunnel because there are lots more port scans and hacking attempts through that than over my regular IP and I don't trust java in general. So I added the following pf rule on the mini: ### Allow Minecraft public through user mc pass in on $eth_if proto {tcp,udp} from any to any port 24983 user mc pass out on $eth_if proto {tcp, udp} from any to any user mc And these additions on the border firewall: Inbound: Allow always TCP/UDP from any to 10.0.0.40 (NAS) Outbound: Allow always TCP port 80 from 10.0.0.40 to any (needed for online account checkups) This works fine but only when the OpenVPN/Tunnelblick tunnel is down. When up no connection is possbile to the minecraft server from outside of LAN. inside LAN is always OK. Everything else functions as intended. I believe the redirect_gateway push is close to the root of the problem, but I want to keep that specific VPN provider because of the fantastic throughput, price and service. The Solution? How can I open up the minecraft server port outside of the tunnel so it's only available over en0 not the VPN tunnel? Should I a static route? But I don't know which IPs will be connecting...stumbles How secure would to estimate this setup to be and do you have other improvements to share? I've searched extensively in the last few days to no avail...If you've read this far I bet you know the answer :)

  Read the article

• How to flip video feed that's presented upside down?

  - by Zuul

  Skype an other applications running under windows 7 Ultimate are presenting the video captured from the laptop built-in webcam upside down. I've tried many solution that I was able to find regarding issues like this, but to no avail. Some of the most relevant are discussed here: From Skype Support Network, the thread why is my video image of myself upside-down??? From ASUSTek Forums, the thread Built-in camera upside down Both present several potential solutions to this issue, but I've been unable to fix it for the laptop ASUS U6S. What I've already tried: Changing Drivers The driver that works must be the one from Windows, all others available from ASUS drivers either don't install or install but the webcam doesn't provide any video feed. This disallows all options that concern using an older driver or editing the .inf file as to manually adjust the settings. ASUS does not provide drivers for Windows 7, so I've used drivers from Windows Vista 32 Bit. Using the application manycam This application actually solves the issue (temporarily), but creates new ones: If I use the application to flip the video feed, Skype video call cease to work. This application doesn't save the settings, at least I wasn't able to find any way to save the settings I've used to flip the video feed. A computer restart brings all back to how it was, video feed upside down and if the application is still installed, Skype continues to fail on video calls. Regedit I've searched thru Windows Registry Editor as to find any reference to the webcam settings, hopping to find a key with the Flip parameter, since it's up to the driver to flip the image (by what I could ascertain from this problem). Couldn't find any reference to such settings, either they actually don't exist within the Windows Registry or they use some weird name that I could think off. System Configuration I was able to access the webcam system settings from the Windows Device Manager, but the tab that actually has the Image Rotation setting is always disabled. The same goes for the settings available from the Skype webcam options (that essentially is presenting the same settings as Windows Device Manager, just within a custom Skype pop-up). Question: How can I flip the video feed from the laptop's built-in webcam, as to properly see and broadcast the video?

  Read the article

• How should we serve files in a small bioinformatics cluster?

  - by cespinoza

  We have a small cluster of six ubuntu servers. We run bioinformatics analyses on these clusters. Each analysis takes about 24 hours to complete, each core i7 server can handle 2 at a time, takes as input about 5GB data and outputs about 10-25GB of data. We run dozens of these a week. The software is a hodgepodge of custom perl scripts and 3rd party sequence alignment software written in C/C++. Currently, files are served from two of the compute nodes (yes, we're using compute nodes as file servers)-- each node has 5 1TB sata drives mounted separately (no raid) and is pooled via glusterfs 2.0.1. They each have as 3 bonded intel ethernet pci gigabit ethernet cards, attached to a d-link DGS-1224T switch ($300 24 port consumer-level). We are not currently using jumbo frames (not sure why, actually). The two file-serving compute nodes are then mirrored via glusterfs. Each of the four other nodes mounts the files via glusterfs. The files are all large (4gb+), and are stored as bare files (no database/etc) if that matters. As you can imagine, this is a bit of a mess that grew organically without forethought and we want to improve it now that we're running out of space. Our analyses are I/O intensive and it is a bottle neck-- we're only getting 140mB/sec between the two fileservers, maybe 50mb/sec from the clients (which only have single NICs). We have a flexible budget which I can probably get up $5k or so. How should we spend our budget? We need at least 10TB of storage fast enough to serve all nodes. How fast/big does the cpu/memory of such a file server have to be? Should we use NFS, ATA over Ethernet, iSCSI, Glusterfs, or something else? Should we buy two or more servers and create some sort of storage cluster, or is 1 server enough for such a small number of nodes? Should we invest in faster NICs (say, PCI-express cards with multiple connectors)? The switch? Should we use raid, if so, hardware or software? and which raid (5, 6, 10, etc)? Any ideas appreciated. We're biologists, not IT gurus.

  Read the article

• How does an NTP host switch among the various modes?

  - by James A. Rosen

  The NTPv3 RFC describes five operating modes: Symmetric Active (1): A host operating in this mode sends periodic messages regardless of the reachability state or stratum of its peer. By operating in this mode the host announces its willingness to synchronize and be synchronized by the peer. Symmetric Passive (2): This type of association is ordinarily created upon arrival of a message from a peer operating in the symmetric active mode and persists only as long as the peer is reachable and operating at a stratum level less than or equal to the host; otherwise, the association is dissolved. However, the association will always persist until at least one message has been sent in reply. By operating in this mode the host announces its willingness to synchronize and be synchronized by the peer. Client (3): A host operating in this mode sends periodic messages regardless of the reachability state or stratum of its peer. By operating in this mode the host, usually a LAN workstation, announces its willingness to be synchronized by, but not to synchronize the peer. Server (4): This type of association is ordinarily created upon arrival of a client request message and exists only in order to reply to that request, after which the association is dissolved. By operating in this mode the host, usually a LAN time server, announces its willingness to synchronize, but not to be synchronized by the peer. Broadcast (5): A host operating in this mode sends periodic messages regardless of the reachability state or stratum of the peers. By operating in this mode the host, usually a LAN time server operating on a high-speed broadcast medium, announces its willingness to synchronize all of the peers, but not to be synchronized by any of them. It seems to me, though, that any host except a leaf node would probably be in several modes. For example, I might have a local area network with three NTP servers, each in Symmetric Active (1) mode with respect to one another. They would also each be clients (3) of one of the many public stratum two time servers. Lastly, they would all server as servers (4) to the many local clients. Is the point that they're only in a given mode for a moment during the synchronization? If so, how does a host know to switch? I'm only looking for enough depth here to discuss the issue in an educated manner, not to write a custom time server.

  Read the article

• Why would a process monitoring script use exit 1; on finding no problems?

  - by user568458

  General question: On a Linux (Centos) server, if a process monitoring script run by cron is set to close with exit 1; rather than exit 0; on finding that everything is okay and that no action is needed, is that a mistake? Or are there legitimate reasons for calling exit 1; instead of exit 0; on the "Everything's fine, no action needed" condition? exit 0; on finding no problems seems to me to be more appropriate. But maybe there's something I'm not aware of. For example, maybe there's something specific to Cron? Or maybe there's a convention in process monitoring scripts that 'failure' means 'this script failed to need to fix a problem' (rather than what I would expect which is that exit 1; would mean 'the process being monitored has failed'?) My specific case: I'm looking at a process monitoring script written by my web hosting company. By process monitoring script, I mean a script executed by Cron on a regular basis that checks if an important system process is running, and if it isn't running, takes actions such as mailing an administrator or restarting the process. Here's the (generalised) structure of their script, for a service running on port 8080 (in this case, Apache Tomcat): SERVICE=$(/usr/sbin/lsof -i tcp:8080 | wc -l); if [ $SERVICE != 0 ]; then exit 1; else #take action fi Seems simple enough even for someone with limited knowledge like me, except the exit 1; part seems odd. As I understand it, exit 0; closes a program and signifies to the parent that executed the program that everything is fine, exit n; where n0 and n<127 signifies that there has been some kind of error or problem. Here, their script seems to go against that rule - it calls exit 1; in the condition where everything is fine, and doesn't exit after taking remedial action in the problem condition. To me, this looks like a mistake - but my experience in this area is limited. Are there cases where calling exit 1; in the "Everything's fine, no action needed" condition is more appropriate than calling exit 0;? Or is it a mistake? Wider context is pretty simple. It's a Centos VPS, running Plesk. The script is being called by Cron via Plesk's "Scheduled tasks" Cron manager. There's no custom layer between Cron and this script that would respond in an unusual way to the exit call. It's a fairly average, almost out-of-the box Plesk-managed Centos VPS (in so far as there is such a thing). The process being monitored by this script is Apache Tomcat.

  Read the article

• Tips for maximizing Nginx requests/sec?

  - by linkedlinked

  I'm building an analytics package, and project requirements state that I need to support 1 billion hits per day. Yep, "billion". In other words, no less than 12,000 hits per second sustained, and preferably some room to burst. I know I'll need multiple servers for this, but I'm trying to get maximum performance out of each node before "throwing more hardware at it". Right now, I have the hits-tracking portion completed, and well optimized. I pretty much just save the requests straight into Redis (for later processing with Hadoop). The application is Python/Django with a gunicorn for the gateway. My 2GB Ubuntu 10.04 Rackspace server (not a production machine) can serve about 1200 static files per second (benchmarked using Apache AB against a single static asset). To compare, if I swap out the static file link with my tracking link, I still get about 600 requests per second -- I think this means my tracker is well optimized, because it's only a factor of 2 slower than serving static assets. However, when I benchmark with millions of hits, I notice a few things -- No disk usage -- this is expected, because I've turned off all Nginx logs, and my custom code doesn't do anything but save the request details into Redis. Non-constant memory usage -- Presumably due to Redis' memory managing, my memory usage will gradually climb up and then drop back down, but it's never once been my bottleneck. System load hovers around 2-4, the system is still responsive during even my heaviest benchmarks, and I can still manually view http://mysite.com/tracking/pixel with little visible delay while my (other) server performs 600 requests per second. If I run a short test, say 50,000 hits (takes about 2m), I get a steady, reliable 600 requests per second. If I run a longer test (tried up to 3.5m so far), my r/s degrades to about 250. My questions -- a. Does it look like I'm maxing out this server yet? Is 1,200/s static files nginx performance comparable to what others have experienced? b. Are there common nginx tunings for such high-volume applications? I have worker threads set to 64, and gunicorn worker threads set to 8, but tweaking these values doesn't seem to help or harm me much. c. Are there any linux-level settings that could be limiting my incoming connections? d. What could cause my performance to degrade to 250r/s on long-running tests? Again, the memory is not maxing out during these tests, and HDD use is nil. Thanks in advance, all :)

  Read the article

• Remote Debian System Preventing Logon

  - by choobablue

  I have a dozen or so single board computers on a network running Debian (squeeze) and access them via ssh (ssh server is dropbear). To give an idea of the hardware of these computers they're 1.2 GHz x86 processors, 1GB of RAM and 4GB flash drives formatted as ext2 (I avoided ext3 to prevent the added flash write stress from journaling), there is also a swap partition on the drive. Normally the setup I'm using works great and I can access all the computers. Every once in a while one will prevent access. What happens is I try to connect via ssh (putty) and it gives me the login prompt, I enter the username and password and it responds 'Access Denied' and it will also refuse any public key in ~/.ssh/authorized_keys. The credentials are correct as they worked previously. The computer responds to pings and putty recognizes the server public key, which implies to me the system is still running. Restarting the server fixes the problem and I can log in again. (I tried a temporary fix of putting shutdown -r now in the root crontab but this doesn't seem to reliably be run once the hang happens) Once I restart however there doesn't seem to be any information in any of the system logs to indicate what happened, the logs are simply empty for that time period, as if the system had crashed. There is some custom software running on the system which appears to stop working (which is why I wanted to ssh to begin with). I'm assuming that this program is the source of the problems but I'm unsure of how it would cause it and how to debug what is happening. The most likely explanation I can think of is that there is a memory leak in the other program that then prevents dropbear from spawning a new login shell (and crontab from executing shutdown) as there is not enough free memory. But looking at memory usage of the other (working) computers there doesn't seem to be any meaningful increase in memory to indicate a leak (unless it's a very big, fast acting and rare leak). I would think that when the OS ran out of memory it would restart the system or kill processes (the Linux kernel restarts right?). The other thing I wonder about is if the fact that they are running off a flash drive could have some effect, especially the swap partition (which I think I should remove to prevent wear of the flash), but the flash drives are young (~1 month) and I don't think that wear would be a factor yet. Does anybody have an idea of what could cause these symptoms, if it could be done by a memory leak, or something else I haven't thought of. And does anybody know of a method to try to debug the problem and find out more information about what's going wrong?

  Read the article

• XamDataGrid Binding problem

  - by Mohammad Mostafizur Rahman

  I want to bind a cell of a XamDataGrid using ComboBox control through a collection's(CurrentEntity.INVTransactions) property(BatchList) but it does not work. I'm using mvvm pattern.In my code "BatchId" and "BatchList" are the properties of CurrentEntity.INVTransactions collection. would you please tell me why the comboBox of the xamDataGrid doesn't display the BatchList? sample code: <UserControl x:Class="PDCL.ERP.Modules.Inventory.Views.RequisitionList.RequisitionInfoUserControl" ...> <GroupBox Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="2" Header="Details" VerticalAlignment="Top" Margin="5,0,5,0"> <Grid> <igDP:XamDataGrid Margin="2" DataSource="{Binding CurrentEntity.INVTransactions}" x:Name="requisitionDeailsGrid" InitializeRecord="requisitionDeailsGrid_InitializeRecord"> <igDP:XamDataGrid.FieldLayoutSettings> <igDP:FieldLayoutSettings HighlightAlternateRecords="True" AutoGenerateFields="False" AllowAddNew="True" AddNewRecordLocation="OnBottom" AutoFitMode="Always" SupportDataErrorInfo="RecordsAndCells" DataErrorDisplayMode="ErrorIcon" /> </igDP:XamDataGrid.FieldLayoutSettings> <igDP:XamDataGrid.FieldLayouts> <igDP:FieldLayout> <igDP:FieldLayout.Fields> <igDP:Field Name="Remarks" Label="Remarks" Width="Auto"> <igDP:Field.Settings> <igDP:FieldSettings AllowEdit="True" AllowResize="True"/> </igDP:Field.Settings> </igDP:Field> <igDP:Field Name="BatchId" Label="Batch" Width="Auto"> <igDP:Field.Settings> <igDP:FieldSettings EditorType="{x:Type igEditors:XamComboEditor}"> <igDP:FieldSettings.EditorStyle> <Style TargetType="{x:Type igEditors:XamComboEditor}"> <Setter Property="ItemsSource" Value="{Binding INVTransactions.BatchList, RelativeSource = {RelativeSource FindAncestor, AncestorType={x:Type igDP:XamDataGrid}, AncestorLevel=1}}" /> <Setter Property="DisplayMemberPath" Value="BatchName" /> <Setter Property="ValuePath" Value="BatchId" /> </Style> </igDP:FieldSettings.EditorStyle> </igDP:FieldSettings> </igDP:Field.Settings> </igDP:Field> <igDP:Field Name="Qty" Label="Qty Supplied" Width="Auto"> <igDP:Field.Settings> <igDP:FieldSettings AllowEdit="True" AllowResize="True"/> </igDP:Field.Settings> </igDP:Field> </igDP:FieldLayout.Fields> </igDP:FieldLayout> </igDP:XamDataGrid.FieldLayouts> </igDP:XamDataGrid> </Grid> </GroupBox> </UserControl> The output window shows the error "BindingExpression path error: 'INVTransactions' property not found on 'object' ''XamDataGrid' (Name='requisitionDeailsGrid')'. BindingExpression:Path=INVTransactions.BatchList; DataItem='XamDataGrid' (Name='requisitionDeailsGrid'); target element is 'XamComboEditor' (Name=''); target property is 'ItemsSource' (type 'IEnumerable')"

  Read the article

• C# Bind DataTable to Existing DataGridView Column Definitions

  - by Timothy

  I've been struggling with a NullReferenceException and hope someone here will be able to point me in the right direction. I'm trying to create and populate a DataTable and then show the results in a DataGridView control. The basic code follows, and Execution stops with a NullReferenceException at the point where I invoke the new UpdateResults_Delegate. Oddly enough, I can trace entries.Rows.Count successfully before I return it from QueryEventEntries, so I can at least show 1) entries is not a null reference, and 2) the DataTable contains rows of data. I know I have to be doing something wrong, but I just don't know what. private void UpdateResults(DataTable entries) { dataGridView.DataSource = entries; } private void button_Click(object sender, EventArgs e) { PerformQuery(); } private void PerformQuery() { DateTime start = new DateTime(dateTimePicker1.Value.Year, dateTimePicker1.Value.Month, dateTimePicker1.Value.Day, 0, 0, 0); DateTime stop = new DateTime(dateTimePicker2.Value.Year, dateTimePicker2.Value.Month, dateTimePicker2.Value.Day, 0, 0, 0); DataTable entries = QueryEventEntries(start, stop); UpdateResults(entries); } private DataTable QueryEventEntries(DateTime start, DateTime stop) { DataTable entries = new DataTable(); entries.Columns.AddRange(new DataColumn[] { new DataColumn("event_type", typeof(Int32)), new DataColumn("event_time", typeof(DateTime)), new DataColumn("event_detail", typeof(String))}); using (SqlConnection conn = new SqlConnection(DSN)) { using (SqlDataAdapter adapter = new SqlDataAdapter( "SELECT event_type, event_time, event_detail FROM event_log " + "WHERE event_time >= @start AND event_time <= @stop", conn)) { adapter.SelectCommand.Parameters.AddRange(new Object[] { new SqlParameter("@start", start), new SqlParameter("@stop", stop)}); adapter.Fill(entries); } } return entries; } Update I'd like to summarize and provide some additional information I've learned from the discussion here and debugging efforts since I originally posted this question. I am refactoring old code that retrieved records from a database, collected those records as an array, and then later iterated through the array to populate a DataGridView row by row. Threading was originally implemented to compensate and keep the UI responsive during the unnecessary looping. I have since stripped out Thread/Invoke; everything now occurs on the same execution thread (thank you, Sam). I am attempting to replace the slow, unwieldy approach using a DataTable which I can fill with a DataAdapter, and assign to the DataGridView through it's DataSource property (above code updated). I've iterated through the entries DataTable's rows to verify the table contains the expected data before assigning it as the DataGridView's DataSource. foreach (DataRow row in entries.Rows) { System.Diagnostics.Trace.WriteLine( String.Format("{0} {1} {2}", row[0], row[1], row[2])); } One of the column of the DataGridView is a custom DataGridViewColumn to stylize the event_type value. I apologize I didn't mention this before in the original post but I wasn't aware it was important to my problem. I have converted this column temporarily to a standard DataGridViewTextBoxColumn control and am no longer experiencing the Exception. The fields in the DataTable are appended to the list of fields that have been pre-specified in Design view of the DataGridView. The records' values are being populated in these appended fields. When the run time attempts to render the cell a null value is provided (as the value that should be rendered is done so a couple columns over). In light of this, I am re-titling and re-tagging the question. I would still appreciate it if others who have experienced this can instruct me on how to go about binding the DataTable to the existing column definitions of the DataGridView.

  Read the article

• Silverlight: Scrolling with a StackPanel

  - by programatique

  I have a grid, 3 by 3 (3 rowdefinitions and 3 columndefinitions). I want some content (a StackPanel) in one of those grid cells to scroll. I'm fairly sure this is possible but I cannot figure out how. I've tried adding ScrollViewers and Scrollbar controls to the grid cell I want to scroll, but this usually ends up creating scrolling for the entire page. Edit: My issue is more specificlly how I can get scrolling over a StackPanel. An example if the issue I am having is here: <Grid x:Name="LayoutRoot"> <Grid.ColumnDefinitions> <ColumnDefinition/> <ColumnDefinition/> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition/> <RowDefinition/> </Grid.RowDefinitions> <Grid> <TextBlock FontSize="16">1,1</TextBlock> </Grid> <Grid Grid.Column="1"> <TextBlock FontSize="16">1,2</TextBlock> </Grid> <Grid Grid.Row="1"> <TextBlock FontSize="16">2,1</TextBlock> </Grid> <Grid Grid.Column="1" Grid.Row="1"> <StackPanel> <TextBlock>Title</TextBlock> <Grid> <ScrollViewer> <StackPanel> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> </StackPanel> </ScrollViewer> </Grid> </StackPanel> </Grid> </Grid>

  Read the article

• XSLt.transform gives me "d»z"

  - by phenevo

  Hi, I have XML: <results> <Countries country="Albania"> <Regions region="Centralna Albania"> <Provinces province="Durres i okolice"> <Cities city="Durres" cityCode="2B66E0ACFAEF78734E3AF1194BFA6F8DEC4C5760"> <IndividualFlagsWithForObjects Status="1" /> <IndividualFlagsWithForObjects Status="0" /> <IndividualFlagsWithForObjects status="2" /> </Cities> </Provinces> </Regions> </Countries> <Countries .... Which is result of this part of query: SELECT Countries.FileSystemName as country, Regions.DefaultName as region , Provinces.DefaultName as province, cities.defaultname as city, cities.code as cityCode, IndividualFlagsWithForObjects.value as Status I have xslt: <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:output method="text" encoding="iso-8859-1"/> <xsl:param name="delim" select="string(',')" /> <xsl:param name="quote" select="string('&quot;')" /> <xsl:param name="break" select="string('&#xD;')" /> <xsl:template match="/"> <xsl:apply-templates select="results/countries" /> </xsl:template> <xsl:template match="countries"> <xsl:apply-templates /> <xsl:if test="following-sibling::*"> <xsl:value-of select="$break" /> </xsl:if> </xsl:template> <xsl:template match="*"> <!-- remove normalize-space() if you want keep white-space at it is --> <xsl:value-of select="concat($quote, normalize-space(.), $quote)" /> <xsl:if test="following-sibling::*"> <xsl:value-of select="$delim" /> </xsl:if> </xsl:template> <xsl:template match="text()" /> </xsl:stylesheet> And is part of code XmlReader reader = cmd.ExecuteXmlReader(); doc.LoadXml("<results></results>"); XmlNode newNode = doc.ReadNode(reader); while (newNode != null) { doc.DocumentElement.AppendChild(newNode); newNode = doc.ReadNode(reader); } doc.Save(@"c:\listOfCities.xml"); XslCompiledTransform XSLT = new XslCompiledTransform(); XsltSettings settings = new XsltSettings(); settings.EnableScript = true; XSLT.Load(@"c:\xsltfile1.xslt", settings, new XmlUrlResolver()); XSLT.Transform(doc.OuterXml,@"c:\myCities.csv"); Why now I have in my csv only one cell with value : d»z

  Read the article

< Previous Page | 622 623 624 625 626 627 628 629 630 631 632 633  | Next Page >