Search Results

Search found 49521 results on 1981 pages for 'text size'.

Page 626/1981 | < Previous Page | 622 623 624 625 626 627 628 629 630 631 632 633  | Next Page >

• How to modify partitions after install?

  - by ChocoDeveloper

  I wanted to have Ubuntu with full disk encryption on one big partition, and Windows on a small one. In 12.04, only the Server Edition installer has full disk encryption, so I used that and then installed ubuntu-desktop. When it asked for the size, I reduced it from ~999GB to ~750gb. Now after the install, on both gparted and disk utility I see /dev/sda2 taking ~931GB, and nothing unallocated, so I can't create a partition for windows. I got the size right, because when I right-click inside a folder, then hit 'properties', I see Free space: ~690GB (I don't know why it's not ~750GB, but at least it's not 900). The command df -h shows the same. So what can I do? Normally I would just resize a partition with gparted to create unallocated space, then create the partition. But here I have two problems: gparted does not seem to be showing the correct values, and also it says it does not support LUKS so I'm afraid it will mess things up. Any thoughts?

  Read the article

• Run Win7 Guest (raw disk) in Ubuntu (which was installed as Dual Boot on existing Win7)

  - by kingdango

  I installed Ubuntu 12.10 on top of Win 7 as a dual boot (awesome!). I'm hoping to use VirtualBox to run my original Win7 instance as a guest OS under Ubuntu. I found this existing question and followed the directions to no avail. I can get the VMDK file created but when I run it I just get a blank black screen with no additional information and Windows never loads. I see no HD activity or anything that would indicate it's loading. I used this command to create the VMDK file: VBoxManager internalcommands createrawvmdk -filename ~/.VirtualBox/Win7Native.vmdk -rawdisk /dev/sda3 It looks like everything was created correctly but I just get a blank screen when I run the VM. I do get this warning when I boot the VM: VirtualBox - Warning The virtual machine execution may run into and error condition as described below... The medium '/home/XXX/.VirtualBox/Win7Native.vmdk' has a logical size of 583GB but the file system the medium is located on can only handle up to 16GB in theory. We strongly recommend to put all your virtual disk images and the snapshot folder on a proper file system (e.g. etc3) with a sufficient size. ErrorId: Fat Partition Detected Severity: Warning How can I get this working?

  Read the article

• Working with Windows and Unix

  - by user554629

  Beware of new line characters One of the most frequent issues we encounter in Tech Support is the corruption of files that are transferred between Windows and Unix.   The transfer can occur at any stage, but ultimately involves a transfer of a file using an ftp client that is running on Windows;  it could be ftp or filezilla. Windows uses two characters to mark the end of a line in a text file (CR/LF),carriage return, linefeed.   Unix uses a single character (CR). In all situations, it is best to use binary mode transfer for all files, including ascii text files. Common problems: upload a core file from unix to windows using ftp in ascii mode.The file is going to be larger on Windows than Unix.ftp doesn't know if this is a text file with real line-ends, it takes every ascii CR and transmits two ascii characters CR/LF.The core file, tar file, library ... will be corrupted when transferred to Oracle. download a shell script to Windows, and transfer it to Unix using ftpIf the file is edited on Windows, the unix script line-end chars will be doubled.Unix doesn't know how to handle that, and will likely tell you the script is not executable.Why?  The first line of a shell script ( called "sh-bang" ), identifies the command interpreter the unix shell should use for this script.   Common examples:#/bin/sh#/bin/ksh#/bin/bash#/bin/perl#/bin/sh^M    # will not be understood.#/bin/env ksh # special syntax.  Find ksh and run it dos2unix is a common utility found on most unix platforms, that repairs the issue of Windows LineEnd characters in unix script files.   I've written my own flavor of this utility for use in Tech Support and build environments, that is a bit easier to use, and has some nice side-effects. accepts a list of files:   dos2unix *.sh repairs the file in-place.  Doesn't generate a new file you have to name retains the same timestamp;  it is the encoding that changed, not the file content. Here are the versions of dos2unix for each of the environments we work in.They are compressed with gzip, to avoid the ftp ascii transfer trap,and because I am quite limited in the number of files I can upload to this blog. AIX Linux Solaris sparc  Windows 

  Read the article

• SSMS Tools Pack 3.0 is out. Full SSMS 2014 support and improved features.

  - by Mladen Prajdic

  With version 3.0 the SSMS 2014 is fully supported. Since this is a new major version you'll eventually need a new license. Please check the EULA to see when. As a thank you for your patience with this release, everyone that bought the SSMS Tools Pack after April 1st, the release date of SQL Server 2014, will receive a free upgrade. You won't have to do anything for this to take effect. First thing you'll notice is that the UI has been completely changed. It's more in line with SSMS and looks less web-like. Also the core has been updated and rewritten in some places to be better suited for future features. Major improvements for this release are: Window Connection Coloring Something a lot of people have asked me over the last 2 years is if there's a way to color the tab of the window itself. I'm very glad to say that now it is. In SSMS 2012 and higher the actual query window tab is also colored at the top border with the same color as the already existing strip making it much easier to see to which server your query window is connected to even when a window is not focused. To make it even better, you can not also specify the desired color based on the database name and not just the server name. This makes is useful for production environments where you need to be careful in which database you run your queries in. Format SQL The format SQL core was rewritten so it'll be easier to improve it in future versions. New improvement is the ability to terminate SQL statements with semicolons. This is available only in SSMS 2012 and up. Execution Plan Analyzer A big request was to implement the Problems and Solutions tooltip as a window that you can copy the text from. This is now available. You can move the window around and copy text from it. It's a small improvement but better stuff will come. SQL History Current Window History has been improved with faster search and now also shows the color of the server/database it was ran against. This is very helpful if you change your connection in the same query window making it clear which server/database you ran query on. The option to Force Save the history has been added. This is a menu item that flushes the execution and tab content history save buffers to disk. SQL Snippets Added an option to generate snippet from selected SQL text on right click menu. Run script on multiple databases Configurable database groups that you can save and reuse were added. You can create groups of preselected databases to choose from for each server. This makes repetitive tasks much easier New small team licensing option A lot of requests came in for 1 computer, Unlimited VMs option so now it's here. Hope it serves you well.

  Read the article

• Need to run `nvidia-xconfig` before booting

  - by RobinJ

  I formatted my whole hard drive, and installed Elementary OS (Ubuntu 10.10) on it in an attempt to get rid of all the problems. It failed. Every since I installed the nvidia-current drivers I first need to boot into recovery mode, and run sudo nvidia-xconfig before booting the system in the normal way. If I don't do this, it will just stop at a black screen after the boot screen, responding to nothing but CTRL+ALT+DELETE and the power button. When I boot the system after running the nvidia-xconfig command I can just start working as usual. Update I suspect it's got something to do with Plymouth. I shall have to try it again before I can confirm it, but removing the quiet and splash parameters from the kernel line in /boot/grub/grub.cfg seems to help. But still, I like my Plymouth screen. A black screen with text rolling over it (or without the text) doesn't attract me much.

  Read the article

• Network unreachable on Ubuntu guest after trying to set up a host only network on Virtualbox

  - by gkb0986

  I have a Mac OS X host and a bunch of guests including Ubuntu and Arch Linux. I was trying to set up a host-only network at eth1 to let me ssh into the system. But now eth0 isn't working properly either. Ubuntu can no longer connect to remote hosts or browse the internet. It tells me that the network is unreachable. What's gone wrong here? I've included some diagnostics below. $ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10968 errors:0 dropped:0 overruns:0 frame:0 TX packets:10968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:897264 (897.2 KB) TX bytes:897264 (897.2 KB) Other diagnostic commands and the output: $sudo lspci -n 00:00.0 0600: 8086:1237 (rev 02) 00:01.0 0601: 8086:7000 00:01.1 0101: 8086:7111 (rev 01) 00:02.0 0300: 80ee:beef 00:03.0 0200: 8086:100e (rev 02) 00:04.0 0880: 80ee:cafe 00:05.0 0401: 8086:2415 (rev 01) 00:06.0 0C03: 106B:003F 00:07.0 0680: 8086:7113 (REV 08) 00:0D.0 0106: 8086:2829 (REV 02) $sudo lshw -c network *-network DISABLED description: Ethernet interface product: 82540EM Gigabit Ethernet Controller vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 logical name: eth0 version: 02 serial: 08:00:27:7d:22:df size: 1Gbit/s capacity: 1Gbit/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k8-NAPI duplex=full firmware=N/A latency=64 link=no mingnt=255 multicast=yes port=twisted pair speed=1Gbit/s resources: irq:19 memory:f0000000-f001ffff ioport:d010(size=8) $lsmod Module Size Used by nls_utf8 12557 1 isofs 40257 1 vboxsf 43743 2 vesafb 13844 1 snd_intel8x0 38570 2 snd_ac97_codec 134869 1 snd_intel8x0 ac97_bus 12730 1 snd_ac97_codec snd_pcm 97275 2 snd_intel8x0,snd_ac97_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi rfcomm 47604 0 snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event bnep 18281 2 bluetooth 180113 10 rfcomm,bnep ppdev 17113 0 psmouse 97519 0 snd_timer 29990 2 snd_pcm,snd_seq joydev 17693 0 snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq vboxvideo 12622 1 serio_raw 13211 0 snd 79041 11 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd vboxguest 235498 7 vboxsf parport_pc 32866 0 drm 241971 2 vboxvideo i2c_piix4 13301 0 snd_page_alloc 18529 2 snd_intel8x0,snd_pcm mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp usbhid 47238 0 hid 99636 1 usbhid e1000 108589 0

  Read the article

• Which is the appropriate content-type meta tag value?

  - by Argoron

  I have a question about the meta tag content-type. When starting to build my site (HTML+PHP+JS), I copied a lot of the meta tags over from elsewhere, and I have, amongst others, the following: <meta http-equiv="content-type" content="application/xhtml+xml; charset=iso-8859-1" /> Now, I've seen that tag is being used a lot with the value "text/html". I've been searching the web but could not find a comprehensive explanation regarding what the difference between both is. The "text/html" intuitively sounds more straightforward to me. Should I change my tag to that, or might the "application/xhtml+xml" be an equivalent solution ? Alternatively, can anyone point me to a resource where the different values for these tags are listed and explained in a clear manner? Thanks in advance

  Read the article

• What does directory permission 'S' mean? (not lower case, but in upper case)

  - by Howard Guo

  I downloaded Eclipse, uncompressed it, did a few other things and all sudden I notice this interesting behaviour: ^_^ ~/Downloads > sudo chmod 0000 eclipse/ ^_^ ~/Downloads > stat eclipse/ File: 'eclipse/' Size: 4096 Blocks: 8 IO Block: 4096 directory Device: 801h/2049d Inode: 529725 Links: 9 Access: (2000/d-----S---) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2012-11-22 19:54:57.752017352 +1100 Modify: 2012-09-20 18:16:26.000000000 +1000 Change: 2012-11-22 20:07:49.354016510 +1100 Birth: - ^_^ ~/Downloads > sudo chmod 0755 eclipse/ ^_^ ~/Downloads > stat eclipse/ File: 'eclipse/' Size: 4096 Blocks: 8 IO Block: 4096 directory Device: 801h/2049d Inode: 529725 Links: 9 Access: (2755/drwxr-sr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2012-11-22 19:54:57.752017352 +1100 Modify: 2012-09-20 18:16:26.000000000 +1000 Change: 2012-11-22 20:08:19.042016478 +1100 Birth: - What does 'S' permission mean to a directory? And why it doesn't let me get rid of it? Thanks.

  Read the article

• Master Typing Productivity when Programming/SysAdmin [closed]

  - by Hartator

  I try to learn how to type fast and have managed to learn a lot. I am quite good at typing english text now. I do a lot of programmation though and if QWERTY seems fitted for english text, it doesn't seem fitted to type Ruby, Python, Javascript, Command Line or C++... I have read plenty of articles and if I respect their guidelines/tips, I am using a lot my right pinky specially to type []{}|\;:'"/?=+ enter delete. As you can see this symbols are the ones which are the most used when you are programming and we are using only one weak finger to reach them. Am I learning wrong? Is there is a way to be more productive? (I don't really want to switch to DVORAK) Have you some experiences/tips to share regarding this issue? Original Post : http://stackoverflow.com/questions/12230373/programmer-typing-productivty

  Read the article

• h1 title attribute [closed]

  - by codemonkey

  Possible Duplicate: Why don't TITLE tags get indexed in google? Hello there, I have a h1 element on my page which is working great. I have also been using the title attribute on this element which I don't think has been causing much harm at all. My h1 title is "The Great Ocean Road" and the title attribute on that is "Great Ocean Road" - so it's a variation of the h1 text. These are both keywords for the site so i'm hoping it's a good thing for seo. Is that a bad idea do you think? I'm not sure what Search Engines think about using a title attribute or even if they would 'mark me down' for doing it in such a way. Do you think if the h1 text is "The Great Ocean Road", the title attribute should be "The Great Ocean Road" aswell? Thank you in advance

  Read the article

• Volume expanded in Volume Group, old disk reduced but still in use in system

  - by Yurij73

  Tryed to add a new hard sdb (not formated) to my virtualbox Centos. Successfully extended an existing vg_localhost to /dev/sdb/ # lvdisplay --- Logical volume --- LV Path /dev/vg_localhost/lv_root LV Name lv_root VG Name vg_localhost LV UUID DkYX7D-DMud-vLaI-tfnz-xIJJ-VzHz-bRp3tO LV Write Access read/write LV Creation host, time localhost.centos, 2012-12-17 LV Status available # open 1 LV Size 18,03 GiB Current LE 4615 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 20G 0 disk +-vg_localhost-lv_root (dm-0) 253:0 0 18G 0 lvm / +-vg_localhost-lv_swap (dm-1) 253:1 0 2G 0 lvm [SWAP] sda 8:0 0 9G 0 disk +-sda1 8:1 0 500M 0 part /boot +-sda2 8:2 0 8,5G 0 part sr0 11:0 1 1024M 0 rom df -h /dev/mapper/vg_localhost-lv_root 6,5G 6,2G 256M 97% / tmpfs 499M 200K 499M 1% /dev/shm /dev/sda1 485M 78M 382M 17% /boot it still old sda in use, what i have to do further?

  Read the article

• USB hard drive not recognized

  - by user318772

  Until recently I was using the portable USB hard drive in my win 7 laptop and ubuntu laptop. Suddenly now none of the laptops recognize it. This is the message i get by doing lsusb... Bus 001 Device 004: ID 1058:1010 Western Digital Technologies, Inc. Elements External HDD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 003 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub fdisk doesn't show the external hard drive Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004a743 Device Boot Start End Blocks Id System /dev/sda1 * 2048 152111103 76054528 83 Linux /dev/sda2 152113150 156301311 2094081 5 Extended /dev/sda5 152113152 156301311 2094080 82 Linux swap / Solaris when i do testdisk TestDisk 6.14, Data Recovery Utility, July 2013 Christophe GRENIER <[email protected]> http://www.cgsecurity.org TestDisk is free software, and comes with ABSOLUTELY NO WARRANTY. Select a media (use Arrow keys, then press Enter): >Disk /dev/sda - 80 GB / 74 GiB - ST980825AS Disk /dev/sdb - 2199 GB / 2048 GiB testdisk-> Intel->analyse I get partition error Disk /dev/sdb - 2199 GB / 2048 GiB - CHS 2097152 64 32 Current partition structure: Partition Start End Size in sectors Partition: Read error Here is the output of dmesg [11948.549171] Add. Sense: Invalid command operation code [11948.549177] sd 2:0:0:0: [sdb] CDB: [11948.549181] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.550489] sd 2:0:0:0: [sdb] Invalid command failure [11948.550495] sd 2:0:0:0: [sdb] [11948.550499] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.550505] sd 2:0:0:0: [sdb] [11948.550508] Sense Key : Illegal Request [current] [11948.550514] Info fld=0x0 [11948.550519] sd 2:0:0:0: [sdb] [11948.550525] Add. Sense: Invalid command operation code [11948.550531] sd 2:0:0:0: [sdb] CDB: [11948.550534] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.551870] sd 2:0:0:0: [sdb] Invalid command failure [11948.551876] sd 2:0:0:0: [sdb] [11948.551880] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.551885] sd 2:0:0:0: [sdb] [11948.551888] Sense Key : Illegal Request [current] [11948.551895] Info fld=0x0 [11948.551900] sd 2:0:0:0: [sdb] [11948.551905] Add. Sense: Invalid command operation code [11948.551911] sd 2:0:0:0: [sdb] CDB: [11948.551914] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 If possible i want to retrive at least some data from this hard drive. If thats not possible I would like to format it and use it. Any help will be greatly appreciated Thanks

  Read the article

• Assemble static site from templates? (don't want to reinvent the wheel)

  - by raindog308

  I have a site that is 100% static content (no php, just some javascript). There's several "blocks" like the header, menu, footer, etc. that are the same on each page. Rather than do a lot of copy/pasting, I was thinking of some kind of template system where I could run a CLI command (in php, perl, python, shell, whatever) and have it replace all the block tags with the actual block text. I did see some answers in this question, but those seem oriented towards "we provide the style and layout, you provide the text". In my case, I have everything as far as layout, css, etc. - just want to do a glorified sed. Before I invent the wheel, I was wondering if there was a tool out there already.

  Read the article

• Issue with increasing the root partition from the swap

  - by user211761

  I have an issue with increase the size of my root partition. I have ElementaryOS Luna, and while installing it asked me how much space I want to use. I choosed 15 GB for it, because I want to use this as an alternative system. The issue is that after the installation was complete, I found out that my root partition is only 7 GB big, and SWAP is 8 GB which is useless cuz I have 8 GB of RAM. Now I want to shrink the swap and increase the size of my root partition, so I booted the LiveCD and used GParted. I shrinked the swap without any problems, but now I cant add that free space to any partition. I also turned Swap off. I would add a picture, but I need at least 10 reputation to post images ( Stupid ) Its also worth mentioning that in Gparted its showing my partition in a different way. I would post an image BUT I CANT, so I need to write it down. Its something like this [Pointing arrow down] /dev/sda4 Extended /dev/sda5 ntfs /dev/sda6 ext4 (Which is my main partition) /dev/sda7 linux-swap unallocated Picture:

  Read the article

• How to configure Bullet for LookAt?

  - by AllCoder

  I'm having problems positioning Bullet objects. I am doing: ToolVec3 origin = ToolVec3( obj_posx, obj_posy, obj_posz ); ToolVec3 vmod = ToolVec3( object_sizex / 2.0f, object_sizey / 2.0f, object_sizez / 2.0f ); btTransform shapeTransform = btTransform::getIdentity(); shapeTransform.setOrigin( btVector3(origin.x+vmod.x, origin.y+vmod.y, origin.z+vmod.z) ); btDefaultMotionState* myMotionState = new btDefaultMotionState(shapeTransform); btRigidBody::btRigidBodyConstructionInfo rbInfo(mass,myMotionState,m_collisionShapes[2],localInertia); btRigidBody* body = new btRigidBody(rbInfo); I then do: btCollisionObject* colObj = m_dynamicsWorld->getCollisionObjectArray()[i]; btRigidBody* body = btRigidBody::upcast(colObj); if(body && body->getMotionState()) { btDefaultMotionState* myMotionState = (btDefaultMotionState*)body->getMotionState(); myMotionState->m_graphicsWorldTrans.getOpenGLMatrix(m); } else { colObj->getWorldTransform().getOpenGLMatrix(m); } And after obtaining the matrix m, I paste it as model matrix. I am observing few things: I must add some weird "size / 2" to object's position, to have it drawed normally, I have following "up" look at vector defined: "0.0f, -1.0f, 0.0f" – basically, Y grows up, Z grows forward (to monitor), BUT – x grows LEFT, I think there is some conflict with the X direction.. I cannot obtain consistent positioning having world setup like this How to configure this in Bullet? Why the weird + size/2 requirement?

  Read the article

• Properly create centered vertical navigation list with a hover image on both sides?

  - by Damainman

  I have a navigation list I placed inside of a , I am attempting to get an image that appears on both sides of a link when you hover. Basically a an arrow on each side of the link. I have managed to get the effect I am looking for with: <ul> <li style=""> <a href="#">Services</a> </li> <li> <a href="#">About</a> </li> <li> <a href="#">Media</a> </li> <li> <a href="#">FAQ</a> </li> <li> <a href="#">Portfolio</a> </li> <li> <a href="#">Contact</a> </li> </ul> .nav ul{ list-style:none; text-align:center; } .nav li:hover a:before, .nav li:hover a:after { content:url(../images/nav_bullet.png); } The end result will look like the following but with the list centered: link >> Hovered Link << link However I am not sure if that is the best way of going about it, and the image is too close to the text. I tried placing a margin and padding but that didn't work. To top of it off, the image is not vertically centered with the link text. Anyone know of a proper way to do this as I am just going by trial and error? Thank you in advance!

  Read the article

• Partition and mount my secondary hard drive on CentOS 5.5 64bit?

  - by Andrew Fashion

  I am trying to prepare my second hard drive for user image uploads. Here is the current layout: # sudo parted /dev/sda print Model: ATA WDC WD2500KS-00M (scsi) Disk /dev/sda: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 8595MB 8488MB primary linux-swap 3 8595MB 10.7GB 2147MB primary ext3 4 10.7GB 250GB 239GB extended 5 10.7GB 250GB 239GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary. I am assuming #4 is my secondary drive? How do I partition and mount it so I can begin using it? And how do I add to fstab? I understand if it's to many questions in one, just help me with whatever you can I guess :) Thank you for any help!

  Read the article

• Which is the appropriate content-type meta tag value ?

  - by Argoron

  I have a question about the meta tag content-type. When starting to build my site (HTML+PHP+JS), I copied a lot of the meta tags over from elsewhere, and I have, amongst others, the following: <meta http-equiv="content-type" content="application/xhtml+xml; charset=iso-8859-1" /> Now, I've seen that tag is being used a lot with the value "text/html". I've been searching the web but could not find a comprehensive explanation regarding what the difference between both is. The "text/html" intuitively sounds more straightforward to me. Should I change my tag to that, or might the "application/xhtml+xml" be an equivalent solution ? Alternatively, can anyone point me to a resource where the different values for these tags are listed and explained in a clear manner? Thanks in advance

  Read the article

• encoding movies for the web

  - by ELS

  Hi All, I have a friend that hosts his website on IIS and Windows Server 2003 R2 32-bit. He has .WMV files and .MPG and others and some of these are 30 mb in size! He wonders why users complain the site is slow! So my question is how can we reduce the size of these movies? What software? What settings for bit-rate, etc? Is there free software? I can use either a Mac or a PC. Thoughts are appreciated.

  Read the article

• Helping to Reduce Page Compression Failures Rate

  - by Vasil Dimov

  When InnoDB compresses a page it needs the result to fit into its predetermined compressed page size (specified with KEY_BLOCK_SIZE). When the result does not fit we call that a compression failure. In this case InnoDB needs to split up the page and try to compress again. That said, compression failures are bad for performance and should be minimized.Whether the result of the compression will fit largely depends on the data being compressed and some tables and/or indexes may contain more compressible data than others. And so it would be nice if the compression failure rate, along with other compression stats, could be monitored on a per table or even on a per index basis, wouldn't it?This is where the new INFORMATION_SCHEMA table in MySQL 5.6 kicks in. INFORMATION_SCHEMA.INNODB_CMP_PER_INDEX provides exactly this helpful information. It contains the following fields: +-----------------+--------------+------+ | Field | Type | Null | +-----------------+--------------+------+ | database_name | varchar(192) | NO | | table_name | varchar(192) | NO | | index_name | varchar(192) | NO | | compress_ops | int(11) | NO | | compress_ops_ok | int(11) | NO | | compress_time | int(11) | NO | | uncompress_ops | int(11) | NO | | uncompress_time | int(11) | NO | +-----------------+--------------+------+ similarly to INFORMATION_SCHEMA.INNODB_CMP, but this time the data is grouped by "database_name,table_name,index_name" instead of by "page_size".So a query like SELECT database_name, table_name, index_name, compress_ops - compress_ops_ok AS failures FROM information_schema.innodb_cmp_per_index ORDER BY failures DESC; would reveal the most problematic tables and indexes that have the highest compression failure rate.From there on the way to improving performance would be to try to increase the compressed page size or change the structure of the table/indexes or the data being stored and see if it will have a positive impact on performance.

  Read the article

• Look at IE 8 Caret Browsing

  IE 8 allows us to use keyboard to navigate or select text in a web page using Caret browsing feature.

  Read the article

• deb package building

  - by newcode

  While trying to build a package, I gave the following command in terminal: cd Downloads/src/ cd unity-5.10.0/ dpkg-buildpackage -rfakeroot -uc -b Then it gives the output: dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): -D_FORTIFY_SOURCE=2 dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions -Wl,-z,relro dpkg-buildpackage: source package unity dpkg-buildpackage: source version 5.10.0-0ubuntu6 dpkg-buildpackage: source changed by Didier Roche <[email protected]> dpkg-buildpackage: host architecture i386 dpkg-source --before-build unity-5.10.0 dpkg-checkbuilddeps: Unmet build dependencies: libutouch-grail-dev (>= 1.0.20) libutouch-geis-dev (>= 2.0.10) dpkg-buildpackage: warning: Build dependencies/conflicts unsatisfied; aborting. dpkg-buildpackage: warning: (Use -d flag to override.) Then I tried to install the package using: cd.. sudo dpkg -i *deb And it gives: [sudo] password for harshnarang8: dpkg: error processing *deb (--install): cannot access archive: No such file or directory Errors were encountered while processing: *deb What is exactly causing the problem and how to encounter it?

  Read the article

• opengl 3d point cloud render from x,y,z 2d array with texture

  - by user1733628

  Need some direction on 3d point cloud display using openGl in c++ (vs2008). I am brand new to openGl and trying to do a 3d point cloud display with a texture. I have 3 2D arrays (each same size 1024x512) representing x,y,z of each point. I think I am on the right track with glBegin(GL_POLYGON); for(int i=0; i<1024; i++) { for(int j=0; j<512; j++) { glVertex3f(x[i][j], y[i][j], z[i][j]); } } glEnd(); Now this loads all the vertices in the buffer (i think) but from here I am not sure how to proceed. Or I am completely wrong here. Then I have another 2D array (same size) that contains color data (values from 0-255) that I want to use as texture on the 3D point cloud and display. I understand that this maybe a very basic opengl implementation for some but for me this is a huge learning curve. So any pointers, nudge or kick in the right direction will be appreciated.

  Read the article

• Human powered document processing

  - by Denivic

  I want to create a "Human powered document processing" website in a formed as a gaming mechanic that will prompt volunteers to weed out text missed by OCR (optical character reader) The challenge is that the OCR output often contains errors and omissions, which hampers searches. Manual corrections is needed to weed out these mistakes, so that the text become machine readable.. I want to accomplish these task by splitting dull repetitive task into tiny microtasks and distributing then to register contributors on my site. I want to digitalized pedigree books into an online database. I want to recreate recaptcha and http://www.digitalkoot.fi/en/splash all roll into one.. Help!!!! What programing languages is best needed to create a recapctch type website and is there any open source project similar to this I can use? I need a some directions to begin this project, so all and any help will be great.

  Read the article

• Grid collision - finding the location of an entity in each box

  - by Gregg1989

  I am trying to implement grid-based collision in a 2d game with moving circles. The canvas is 400x400 pixels. Below you can see the code for my Grid class. What I want it to do is check inside which box the entities are located and then run a collision check if there are 2 or more entities in the same box. Right now I do not know how to find the position of an entity in a specific box. I know there are many tutorials online, but I haven't been able to find an answer to my question, because they are either written in C/C++ or use the 2d array approach. Code snippets and other help is greatly appreciated. Thanks. public class Grid { ArrayList<ArrayList<Entity>> boxes = new ArrayList<>(); double boxSize = 40; double boxesAmount = 10; ... ... public void checkBoxLocation(ArrayList<Entity> entities) { for (int i = 0; i < entities.size(); i++) { // Get top left coordinates of each entity double entityLeft = entities.get(i).getLayoutX() - entities.get(i).getRadius(); double entityTop = entities.get(i).getLayoutY() + entities.get(i).getRadius(); // Divide coordinate by box size to find the approximate location of the entity for (int j = 0; j < boxesAmount; j++) { //Select each box if ((entityLeft / boxSize <= j + 0.7) && (entityLeft / boxSize >= j)) { if ((entityTop / boxSize <= j + 0.7) && (entityTop / boxSize >= j)) { holdingBoxes.get(j).add(entities.get(i)); System.out.println("Entity " + entities.get(i) + " added to box " + j); } } } } } }

  Read the article

< Previous Page | 622 623 624 625 626 627 628 629 630 631 632 633  | Next Page >