Search Results

Search found 22725 results on 909 pages for 'case sensitivity'.

Page 628/909 | < Previous Page | 624 625 626 627 628 629 630 631 632 633 634 635  | Next Page >

• ASUS P8B WS - Endless Reboots

  - by tuxGurl

  I am running a Intel XEON 1245 with 4GBx2 Kingston Memory ECC Unbuffered DDR3 on an ASUS P8B WS motherboard. BIOS Version 0904 x64. This system is a little over a month old. It is running Ubuntu 11.10. This evening I found the machine turned off. When I tried to restart it, it would POST and stop at the GRUB screen. When I selected Ubuntu and hit enter within 2-3 seconds the would shutdown and restart. If I stayed at the GRUB screen and did nothing the system would not cut out. I tried booting off a USB stick and again 2-3 seconds after selecting 'Try Ubuntu without Installing' the machine will cut power and reboot. Things I have tried so far: Resetting the BIOS using the on board jumper Resetting the BIOS settings to default Disconnecting all external hardware - except keyboard & monitor Booting with 1 stick of RAM - I tried different single sticks Ensured that onboard EPU and GPU boost switches are in the off position. I am running a Memtest86 right now and it has been running for 38+ minutes. This is not an OS problem or an overheating issue (I have a CoolerMaster HAF Case with 3 fans besides the CPU fan) I am at a loss as to what to try next. I think the BIOS is mis-configured somehow but I don't know what to look for.

  Read the article

• Are HDMI to VGA Adapters Really Device-Specific?

  - by allquixotic

  There are a lot of devices on the market right now (especially mobile devices) with a Micro-HDMI or Mini-HDMI port and no VGA or D-Sub output. Most manufacturers of said devices sell a cable that looks something like this: I have yet to find a cable like this that claims to work on a wide array of devices. In general, these cables claim to work with one specific device only. The way these cables work, I think, is that analog VGA signals are sent from the HDMI port on the device. This should work for devices that have special hardware on the motherboard/GPU capable of driving this. Is it the case that these cables have to be custom designed for each device? Or, is it rather that any device which possesses this special "signaling of analog VGA over the HDMI port" can be made to work with a cable that is physically compatible (i.e. the HDMI end plugs into the device and the VGA end accepts a VGA monitor cable)? Note that I am not looking for a product recommendation, just a conceptual clarification on what exactly these devices are doing. Also, a few remarks: The cables like the one depicted here are not digital to analog converters. I know about these: they are expensive, and they are the ONLY solution if your device only outputs a digital signal and is incapable of driving analog VGA over the HDMI port. The cables like the one depicted here are not straight crossover cables from VGA to HDMI, either. The crossover cables are designed to send a digital HDMI signal over the VGA port's wires; that is, the wire protocol is HDMI (digital) but the physical pinout is the same as VGA, even though nothing analog is happening. Once again, this is not the behavior that, I believe, the devices which I'm talking about in this question are doing. The cabling and devices that this question is about transmit the analog VGA data over the HDMI port (the HDMI port is in the device outputting the data, and the VGA side is the monitor/projector).

  Read the article

• Choosing the right TV tuner - USB or PCI TV tuners, hardware/software, DVB? Hybrid/combo/analog?

  - by Nucleon

  Greetings, I'll start with some background information so you know what I'm trying to accomplish and then get to my question. I work at a Television station in the US and we are working on setting up an online DVR/Podcast system for all of our newscasts. So basically we would be recording every newscast in HD, encoding it to flv/h.264 for viewing in a browser on flash compatible and iphone/ipad devices, eventually migrating to WebM when it's browser compliant. This task is theoretically pretty simple as it all it involves is a TV tuner device and a program like VLC, MythTV or whatever to schedule and dump it to a file, encode it with VLC/FFMPEG and push it to the streaming server. Now to the hardware, in order to accomplish that task, should I use an internal PCI tuner or a USB 2.0 tuner? Is there a difference? The bus speeds of both are not too far apart, and is the bus speed really relevant in this case? Does it matter if the device has a hardware encoder or a software encoder? On many sites the USB was recommended for ease of set up and use, but would it overly task a processor, or is that not a concern as long as it's a decent PC (at least duo core, 6gb ram). What's the difference between the stick USB and the Box USBs? To my understanding analog is basically gone in the US, so we would want a hybrid or combo tuner correct? How do those differ from DVB? Are there any other features or concepts which I am missing which may influence the recommended product. It would be ideal if the device which could work in both Linux and a Windows environment, to my knowledge most Hauppauge are? Example 1: PCI Hauppage http://www.newegg.com/Product/Product.aspx?Item=N82E16815116033 Example 2: USB 2.0 Box http://www.newegg.com/Product/Product.aspx?Item=N82E16815116029 Example 3: USB 2.0 Stick http://www.newegg.com/Product/Product.aspx?Item=N82E16815116031 Any guidance from the Superusers would be much appreciated!

  Read the article

• General logging won't work in MySQL

  - by leonstr

  I saw on SF that there's an option in MySQL to log all queries. So, in my version (mysql-server-5.0.45-7.el5 on CentOS 5.2) this appears to be a case of enabling the 'log' option, so I edited /etc/my.cnf to add this: [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql old_passwords= log=/var/log/mysql-general.log [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid I then created the file and set permissions: # touch /var/log/mysql-general.log # chown mysql. /var/log/mysql-general.log # ls -l /var/log/mysql-general.log -rw-r--r-- 1 mysql mysql 0 Jan 18 15:22 /var/log/mysql-general.log But when I start mysqld I get: 120118 15:24:18 mysqld started ^G/usr/libexec/mysqld: File '/var/log/mysql-general.log' not found (Errcode: 13) 120118 15:24:18 [ERROR] Could not use /var/log/mysql-general.log for logging (error 13). Turning logging off for the whole duration of the MySQL server process. To turn it on again: fix the cause, shutdown the MySQL server and restart it. 120118 15:24:18 InnoDB: Started; log sequence number 0 182917764 120118 15:24:18 [Note] /usr/libexec/mysqld: ready for connections. Can anyone suggest why this isn't working?

  Read the article

• htaccess not properly rewriting urls

  - by Cameron Ball

  This is a bit of a weird one. I'm doing some work on a server, and I need rewrite rules for directories that actually exist (in some cases, they are more than one level deep) At the moment my .htaccess looks like this: RewriteEngine on RewriteRule ^simfiles/([-\ a-zA-Z0-9:/]+)$ http://mydomain.com/?portal=simfiles&folder=$1 [L] And this is working OK, for example, a url like: mydomain.com/sifmiles/my-files Will get redirected to mydomain.com/?portal=simfiles&folder=my-files Or in the case of a directory structure that is deeper than one level: mydomain.com/sifmiles/my-files/more-of-my-files Will get redirected to mydomain.com/?portal=simfiles&folder=my-files/more-of-my-files I wrote the regex so that it won't match things with a . in the path, because there are css and js files which reside in simfiles/somedirectory, and if I redirect everything then these cannot be loaded. I tried a configuration like this: RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^simfiles/([-\ a-zA-Z0-9:/\.]+)$ http://mydomain.com/?portal=simfiles&folder=$1 [L] But that doesn't work, things still don't load properly. So my first question is, how can I achieve this "properly"? I don't like my solution because it means redirects won't occur if the folder has a . in its name. My second problem, is that while the redirection is happening properly, the url becomes: http://mydomain.com/?portal=simfiles&folder=my-files I want the URL to remain clean, like: http://mydomain.com/sifmiles/my-files How can I achieve this?

  Read the article

• IIS8 behind a VPN + Windows Server 2012 - how to properly bind IP+Port

  - by ryugen

  This is my first question so I hope I'm going to give you enough information. I'm running Windows Server 2012 within the Hyper-V environment of my Windows 8 machine. Within Windows Server 2012 I'm running a VPN tool based on openVPN to hide my real IP. When I run IIS8 with the VPN disconnected it works flawlessly through the Internet (port 80 forwarded correctly). But as soon as I connect to the VPN I can't reach my site through the domain anymore. Now I tried basically everything I know which is why I'm asking you guys. I tried binding IIS8 to the IP of my virtual ethernet card. I tried changing the priority of the NIC through the "Network and sharing center" via the advanced tab. I used ipconfig /flushdns in case there was something wrong in the DNS handling. Hell, I even turned off the Windows firewall. I also used a port scanner to verify the problem. The webserver is reachable on port 80 with VPN disconnected and immediately gets unreachable on connect. Theoretically both IPs (my regular one AND the VPN) should be reachable or at least not impair the other one right? Do you have any other suggestion? Do I have to route something somewhere somehow?

  Read the article

• Need to link WP Blog with Rails App on Heroku

  - by John Glass

  I have a client who wants to migrate his Rails app to Heroku. However the client also has a blog associated with his domain that runs on WordPress. Currently, the WordPress blog is running happily alongside the Rails app, but once we migrate to Heroku, that clearly won't be possible. The url for the app is like http://mydomain.com, and the url for the blog is like http://mydomain/blog. I realize that the best long-term solution is to redo the blog in a Rails format like Toto or Jekyll. But in the short term, what is the best way to continue hosting the WP blog where it is (or somewhere) but use Heroku to run the app? The client doesn't want the blog to be on a subdomain, but to remain at mydomain/blog for SEO reasons and also since there is traffic to the blog. I have two ideas: Use rack_rewrite or refraction (or just a regular old 301 and Apache mod_rewrite) on the old (non-Heroku) server to redirect the main url from the old site to Heroku. In this case, I can just leave the Wordpress blog running happily where it is. I think?? Is there a reason to choose one of those options (rack_rewrite, refraction, or mod_rewrite) over the others if I do it this way? Switch the DNS info to point to the Heroku site, and then use a 301 redirect from the blog to the old site. But then I'll have to get the old (non-Heroku) site on a subdomain and use some kind of rewrite rules anyway so it looks like it isn't a subdomain. Are either of these approaches preferable, or is there another way to do it that's easier that I'm missing?

  Read the article

• What can lead to a zone memory exhaustion and how Nginx reacts to it?

  - by Miles Hughes

  What is a possible scenario for exhausting the memory designated to a connection zone with limit_conn_zone directive and what are the implication in this case? Suppose I have this in my configuration: http { limit_conn_zone $binary_remote_addr zone=connzone:1m; ... server { limit_conn connzone 5; which, according to the documentation, allocates 16000 states for connzone on a 64-bit server. It also says that If the storage for a zone is exhausted, the server will return error 503 (Service Temporarily Unavailable) to all further requests. Well, Ok. But what does it mean on practice? When does this happen? Who receives those 503s? Does it mean that if the number of IPs somehow associated with connzone hits 16000 everyone gets a 503 and it's all over? How does Nginx decide? The documentation is weirdly vague on this. So, considering the example config, who would actually get a 503 and under which circumstances and how would things go from there? Same with request zones?

  Read the article

• Windows 2008 R2 remote desktop - Double Login

  - by Zulgrib

  After an Active Directory fail RDP connection started to ask for credentials twice (once on local RDP program, second time on remote's logon screen) I already looked at Windows 2008 R2 RDS - Double Login Solution provided there doesn't work for me. The server is alone, without AD/DNS services, RDP service isn't installed I tried every security settings on RDP-Tcp (RDP, Negotiate, SLL) Logon option is set to "Use credentials from the client" Both windows client and server use RDP 7.1 fPromptForPassword regitries are set to 0 Local Computer Policy\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security\Always prompt for password upon connection is set to "Disabled" Why i am sure the problem comes from the server and not the client ? This problem affected a 3rd RDP program on Android too (it was directly showing "preparing desktop previously, on both MS RDP and the 3rd program) No bakcup are available (Else the Active Directory wouldn't be a fail, but just a lose of time) I am wondering if a rule linked to RDP got changed after the AD install+unistall, but i'm unable to find where. While this is not a critic problem, this is very annoying. I don't know if more information are needed, if it's the case and if you are patient enough, please tell me what is missing and i'll edit this post to add the missing informations.

  Read the article

• Networking "chokes" on Windows 7 64 bit

  - by Rohit Nair

  I've been having this problem for some months now, and I have been unable to figure out a solution, or even the cause. At random points throughout the day, my internet connectivity "freezes". I don't get disconnected from my local wireless network. My router doesn't get disconnected from the world. However, for some reason, my computer stops receiving packets. If I'm playing an MMO ( World of Warcraft, in this case, but it has happened with Eve Online as well ) all activity just freezes. If I try to browse, Opera, Firefox and IE all stall at "Waiting for google.com..." or whatever the hostname may be. Inspection with a packet sniffer seems to reveal that there are no incoming packets. Here's the interesting part. Disconnecting from my wireless network and reconnecting fixes the issue. Obviously this led me to conclude that it was a problem with my router or wireless card. However, I have tweaked all the settings on my router that I could think of, including things like QoS, AP Isolation, etc. with no change. My wireless card doesn't really have that many options, and I have uninstalled and reinstalled drivers a few times without any change. Windows Firewall on/off doesn't make a difference. Anyone have any suggestions for debugging this? It's becoming an annoyance.

  Read the article

• multiple folder structures/views

  - by Sojourner

  Newbie. Setting up a server for a law firm. Want to set up the folder structure as follows: Client 1 Name -- Matter 1 (i.e. setting up corporation) -- Matter 2 (i.e. divorce) -- Matter 3 (i.e. setting up trust) Client 2 Name -- Matter 1 Client 3 Name -- Matter 1 and so on. But the attorneys prefer navigating a folder structure, more based on what case type: Civil -- Client 1 Name (i.e. Smythe) -- Client 2 Name (i.e. Jones) -- Client 3 Name (i.e. Johson) -- Landlord/Tenant -- Client 1 Name (i.e. Jones) -- Client 2 Name (i.e. Johson) -- Class Action Suits -- Suit 1 -- Suit 2 Personal Injury -- Client 1 Name -- Client 2 Name -- Client 3 Name Criminal -- Client 1 Name (i.e. Smythe) I'd like to know if it's possible to set up the server with the first folder structure (it's more organized and easier to employ scripts), while having the second folder structure available for users who find it easier to deal with the same types of cases grouped together.

  Read the article

• apache2 defaultsite redirect but not virtual host

  - by MMM

  I'm trying to set up a new server with several virtual hosts but also such that if the requested fqdn doesn't match a virtual host then the request is redirected to http://example.com/log.php?url=fqdn I have got the default host redirecting as desired however the virtual host that I have defined doesn't work. I'm testing using a different host and curl -I http://hostname.example.com:8080/ on the command line to read the html headers to check for the redirect header directly rather than following it with a browser (to avoid any caching issues). I have defined a virtualhost as the fqdn of the server but when I use curl to request that virtualhost I get redirected. If I request the server by any other name which doesn't have a virtualhost defined I also get redirected. apache version is 2.2.16 on ubuntu The config (concatenated together in order from a couple of different files) is as follows: Listen 8080 NameVirtualHost * <VirtualHost _default_> ServerAdmin [email protected] RewriteEngine On RewriteRule ^(.*)$ http://example.com/log.php?url=%{HTTP_HOST}$1 [R=302,L] </VirtualHost> <VirtualHost *> <Directory "/var/www"> allow from all Options Indexes </Directory> DocumentRoot /var/www ServerName hostname.example.com </VirtualHost> I've also tried ServerName values of hostname.example.com:* and hostname.example.com:8080 In case I wasn't clear enough: anything.anything.any/something requested from my server should redirect to example.com/log.php?url=anything.anything.any/something foo.example.com (not defined as a VirtualHost) requested from my server should redirect to example.com/log.php?url=foo.example.com hostname.example.com (defined as a VirtualHost) requested from my server should return an html document anothername.example.com (also defined as a VirtualHost) requested from my server should return an html document It turns out that because the servers own fqdn is hostname.example.com that gets redirected to the Default VirtualHost even if there is a named VirtualHost for it. Other fqdn's that are not the same as the servers fqdn work as I intended.

  Read the article

• Install Python setuptools on CentOS 6

  - by Ivan

  I'm trying to install setuptools with no success so far. When I do python3.3 ez_setup.py I get the following error: Extracting in /tmp/tmp6nn4cz Traceback (most recent call last): File "ez_setup.py", line 370, in <module> sys.exit(main()) File "ez_setup.py", line 367, in main return _install(tarball, _build_install_args(options)) File "ez_setup.py", line 55, in _install tar = tarfile.open(tarball) File "/usr/local/lib/python3.3/tarfile.py", line 1571, in open raise ReadError("file could not be opened successfully") tarfile.ReadError: file could not be opened successfully I've been reading and it seems that zlib-devel was not installed when the python installation was done. However, I did uncomment line 358 on Modules/Setup to enable zlib before compiling and if I try to import zlib on python3.3 console it works. Also, in case it helps, here is the ldd python3.3: # ldd `which python3.3` linux-vdso.so.1 => (0x00007fff79fda000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00002b96092da000) libdl.so.2 => /lib64/libdl.so.2 (0x00002b96094f6000) libutil.so.1 => /lib64/libutil.so.1 (0x00002b96096fa000) libz.so.1 => /lib64/libz.so.1 (0x00002b96098fe000) libm.so.6 => /lib64/libm.so.6 (0x00002b9609b12000) libc.so.6 => /lib64/libc.so.6 (0x00002b9609d95000) /lib64/ld-linux-x86-64.so.2 (0x00002b96090bc000) What can I do?

  Read the article

• snort analysis of wireshark capture

  - by Ben Voigt

  I'm trying to identify trouble users on our network. ntop identifies high traffic and high connection users, but malware doesn't always need high bandwidth to really mess things up. So I am trying to do offline analysis with snort (don't want to burden the router with inline analysis of 20 Mbps traffic). Apparently snort provides a -r option for this purpose, but I can't get the analysis to run. The analysis system is gentoo, amd64, in case that makes any difference. I've already used oinkmaster to download the latest IDS signatures. But when I try to run snort, I keep getting the following error: % snort -V ,,_ -*> Snort! <*- o" )~ Version 2.9.0.3 IPv6 GRE (Build 98) x86_64-linux '''' By Martin Roesch & The Snort Team: http://www.snort.org/snort/snort-team Copyright (C) 1998-2010 Sourcefire, Inc., et al. Using libpcap version 1.1.1 Using PCRE version: 8.11 2010-12-10 Using ZLIB version: 1.2.5 %> snort -v -r jan21-for-snort.cap -c /etc/snort/snort.conf -l ~/snortlog/ (snip) 273 out of 1024 flowbits in use. [ Port Based Pattern Matching Memory ] +- [ Aho-Corasick Summary ] ------------------------------------- | Storage Format : Full-Q | Finite Automaton : DFA | Alphabet Size : 256 Chars | Sizeof State : Variable (1,2,4 bytes) | Instances : 314 | 1 byte states : 304 | 2 byte states : 10 | 4 byte states : 0 | Characters : 69371 | States : 58631 | Transitions : 3471623 | State Density : 23.1% | Patterns : 3020 | Match States : 2934 | Memory (MB) : 29.66 | Patterns : 0.36 | Match Lists : 0.77 | DFA | 1 byte states : 1.37 | 2 byte states : 26.59 | 4 byte states : 0.00 +---------------------------------------------------------------- [ Number of patterns truncated to 20 bytes: 563 ] ERROR: Can't find pcap DAQ! Fatal Error, Quitting.. net-libs/daq is installed, but I don't even want to capture traffic, I just want to process the capture file. What configuration options should I be setting/unsetting in order to do offline analysis instead of real-time capture?

  Read the article

• Kernel panic while loading Mac OS X on VMWare

  - by Vladimir Gritsenko

  I'm trying to run Mac OS X 10.6.3 on VMWare 7.1 from within Windows 7 64 bit. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

  Read the article

• Startup script for Red5 on Ubuntu 9.04

  - by user49249

  I am creating startup script for Red5 on Ubuntu. Red5 is installed in /opt/red5 Following is a working script on a CentOS Box on which Red5 is running [code] ==========Start init script ========== #!/bin/sh PROG=red5 RED5_HOME=/opt/red5/dist DAEMON=$RED5_HOME/$PROG.sh PIDFILE=/var/run/$PROG.pid # Source function library . /etc/rc.d/init.d/functions [ -r /etc/sysconfig/red5 ] && . /etc/sysconfig/red5 RETVAL=0 case "$1" in start) echo -n $"Starting $PROG: " cd $RED5_HOME $DAEMON >/dev/null 2>/dev/null & RETVAL=$? if [ $RETVAL -eq 0 ]; then echo $! > $PIDFILE touch /var/lock/subsys/$PROG fi [ $RETVAL -eq 0 ] && success $"$PROG startup" || failure $"$PROG startup" echo ;; stop) echo -n $"Shutting down $PROG: " killproc -p $PIDFILE RETVAL=$? echo [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$PROG ;; restart) $0 stop $0 start ;; status) status $PROG -p $PIDFILE RETVAL=$? ;; *) echo $"Usage: $0 {start|stop|restart|status}" RETVAL=1 esac exit $RETVAL [/code] What do I need to replace for Ubuntu in the above script. My Red5 is in /opt/red5/ and to start it manually I always do /opt/red5/dist/red5.sh from Ubuntu As I did not find rc.d/functions on Ubuntu on my laptop also /etc/init.d/functions I did not existed. I would like to be able to use them with service as Red hat distributions do. I checked /lib/lsb/init-functions.

  Read the article

• Add bookmarks to Delicious and Google Bookmarks at the same time

  - by BrianH

  I have used delicious.com (or back then, del.icio.us) to store my bookmarks for a long time now, and I love it. I was looking through some of my Google services, and realized they have a bookmarking service that integrates with your Google searches (I thought they had a bookmarking service before, but it went away? Maybe not). I like delicious just fine - I'm not interested in leaving. But I also like how my Google bookmarks are highlighted (and I'm guessing, brought to the top) in my search results so I can easily tell if I've bookmarked a site (kind of like the "promote up" feature). I can't even count the number of times I search for a site only to find I've been there months or years ago. If sites I've bookmarked in the past are highlighted in my search results, it makes it easier to pick which search result to go to. My question is around bookmarking tools: Is there a bookmarklet or Firefox addon that will let me save a bookmark to multiple services at the same time, in this case, Google and Delicious? Or maybe a service to sync my delicious bookmarks to Google bookmarks on a regular basis? I have used the Delicious addon since the beginning - it would just be nice to add a bookmark to multiple services with 1 addon. For that matter, it would be nice to add Evernote into the mix - click 1 button to save the page to Evernote, and bookmark the page in Google and delicious. EDIT on 7/30/2009 - Summary: A proposed solution is to use the Delicious addon and the GMarks addon to keep the 2 services in sync. I was not able to get the 2 addons to keep everything in sync, so it was also suggest to use the Google Toolbar with the Delicious addon to keep everything in sync. I personally have reservations with letting Google know about every single site I visit, I believe this solution will work, so I am accepting it as the answer. I still wish there was a solution that would let you post a bookmark/page to multiple services at the same time (delicious, google, evernote, digg, diigo, etc.). Thanks!

  Read the article

• Create Windows AMI with instance storage

  - by Jonathan Oliver

  I have a business use case and workflow where local/instance/ephemeral storage for an EC2 instance is ideal. Unfortunately I'm coupled to a Windows platform for this particular task and the EC2 Windows offering appears to have some deficiencies related to AMI creation. In essence, I'm trying to figure out if there's a way to attach local instance storage to a Windows EC2 instance using the typical command line interface (because the Amazon Website GUI doesn't support it) and then to somehow create an AMI based upon that. I've tried creating a snapshot and then creating a Windows AMI based upon the snapshot, but of course the docs say this is unsupported and makes an unbootable AMI. In short, here's what I'm trying to do: Be able to run a Windows instance (EBS/S3 instance doesn't matter) Attach local instance storage as drive D: Persist that configuration as an AMI such that I can start lots of them as necessary from either the GUI, command line, or REST API. Be able to take a launched instance, update software, shutdown, and create another AMI based upon that. Wash, rinse, repeat. One other potential option which isn't horrible, but isn't ideal is to create an AMI which has 2 EBS volumes already attached (system+apps and data). Essentially, every time I startup an instance based upon the AMI it'll create 2 new EBS volumes of pre-determined size. I'm trying to avoid that scenario if possible.

  Read the article

• Ubuntu 12.04 cloud edition on Amazon - Apache2 - /etc

  - by jdog

  I have setup a web server on Amazon with 3 Virtual hosts. For some reason I can't get any of the sites going on it, they all show a 404 error. /var/log/apache2/error.log shows "File does not exist: /etc/apache2/htdocs" I have checked: a2ensite all my virtual hosts actually checked softlinks in sites-enabled access rights in /var/www to 777, in case user is not www-data grep -r htdocs /etc/apache2 (returns nothing) ports.conf has NameVirtualHost directive exactly matching Virtual Hosts What else could this be? ports.conf # If you just change the port or add more ports here, you will likely also # have to change the VirtualHost statement in # /etc/apache2/sites-enabled/000-default # This is also true if you have upgraded from before 2.2.9-3 (i.e. from # Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and # README.Debian.gz NameVirtualHost 107.20.169.163:80 Listen 80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> sites-available/www.seleconlight.com <VirtualHost 107.20.169.163:80> ServerName www.seleconlight.com DocumentRoot /var/www/www.seleconlight.com CustomLog /var/log/apache2/www.seleconlight.com-access.log combined ErrorLog /var/log/apache2/www.seleconlight.com-error.log </VirtualHost>

  Read the article

• DHCP forwarding behind access list on a Cisco Catalyst

  - by Ásgeir Bjarnason

  I'm having some trouble with forwarding DHCP from a subnet behind an access list on a Cisco Catalyst 4500 switch. I'm hoping somebody can see the mistake I'm making. The subnet is defined like this: (first three octets of IP addresses and vrf name anonymized) interface Vlan40 ip vrf forwarding vrf_name ip address 10.10.10.126 255.255.255.0 secondary ip address 10.10.10.254 255.255.255.0 ip access-group 100 out ip helper-address 10.10.20.36 no ip redirects I tried turning on a VMWare machine on this subnet that was configured to use DHCP, but I never got a DHCP response and the DHCP server didn't receive a request. I tried putting the following in the access-list: access-list 100 permit udp host 10.10.10.254 host 10.10.20.36 eq bootps access-list 100 permit udp host 10.10.10.254 host 10.10.20.36 eq bootpc access-list 100 permit udp host 10.10.20.36 host 10.10.10.254 eq bootps access-list 100 permit udp host 10.10.20.36 host 10.10.10.254 eq bootpc That didn't help. Can anybody see what the problem is? I know that the DHCP server works; our whole network is running off of this DHCP server I also know that the subnet works because we have active servers running on the network The DHCP scope is already defined on the DHCP server The subnet is correctly defined on the VMWare server (already servers running on the subnet on VMWare) Edit 2012-10-19: This is solved! The subnet had formerly been defined as a /25 network, but was then expanded into a /24 network. When the DHCP scope was altered after this change it was done incorrectly; the gateway was moved to .254, the leasable IP range was in the lower half of the /24 subnet but we forgot to change the CIDR prefix from /25 into /24. This happened some 2 years ago, and we didn't need to use DHCP on this server network again until this week. Thank you MDMarra and Jason Seemann for looking at the question and trying to troubleshoot. Now I'm wondering if I should mark Jason's answer as the accepted answer (I am new to the Stack Exchange network, so I don't know the etiquette of what to do if I misstated the question like in this case).

  Read the article

• need to stop mysql server on my mac os x

  - by al0ne evenings

  I just installed xampp on my mac os x. When I tried start mysql it display a message that mysql is already running on this computer. In order to start mysql stop first mysql. I tried following ways to stop it but neither of them works. mysqladmin version sudo /usr/local/mysql/mysql.server stop //mysql.server command not found mysqladmin -u root -p password shutdown //restarts the server but not shutdown when i use which mysql command it shows this path /usr/local/bin/mysql and when I issue ps aux | grep mysqld command I get following output zafarsaleem 85209 0.0 0.3 2699804 13204 ?? S 7:51AM 0:00.88 /Applications/MAMP/Library/bin/mysqld --basedir=/Applications/MAMP/Library --datadir=/Applications/MAMP/db/mysql --plugin-dir=/Applications/MAMP/Library/lib/plugin --lower-case-table-names=0 --log-error=/Applications/MAMP/logs/mysql_error_log.err --pid-file=/Applications/MAMP/tmp/mysql/mysql.pid --socket=/Applications/MAMP/tmp/mysql/mysql.sock --port=8889 zafarsaleem 85093 0.0 0.0 2435488 924 ?? S 7:51AM 0:00.03 /bin/sh /Applications/MAMP/Library/bin/mysqld_safe --port=8889 --socket=/Applications/MAMP/tmp/mysql/mysql.sock --lower_case_table_names=0 --pid-file=/Applications/MAMP/tmp/mysql/mysql.pid --log-error=/Applications/MAMP/logs/mysql_error_log zafarsaleem 86693 0.0 0.0 2425480 180 s004 R+ 8:30AM 0:00.00 grep mysqld zafarsaleem 86507 0.0 0.3 2678756 11364 ?? S 8:07AM 0:00.63 /usr/local/Cellar/mysql/5.5.20/bin/mysqld --basedir=/usr/local/Cellar/mysql/5.5.20 --datadir=/usr/local/var/mysql --plugin-dir=/usr/local/Cellar/mysql/5.5.20/lib/plugin --max-allowed-packet=32M --log-error=/usr/local/var/mysql/Zafars-MacBook-Pro-2.local.err --pid-file=/usr/local/var/mysql/Zafars-MacBook-Pro-2.local.pid zafarsaleem 86447 0.0 0.0 2435488 920 ?? S 8:07AM 0:00.02 /bin/sh /usr/local/bin/mysqld_safe --max_allowed_packet=32M Please help. How can I resolve this issue.

  Read the article

• Is my HDD dead forever?

  - by Roberto

  Yesterday I turned on my computer and it couldn't boot. I found out the hd (320GB SATA Seagate Momentus 7200.3 for notebook) was broken and it couldn't be recognized by the BIOS. I have another of the same hard drive, so I exchanged the boards. I found out that there is a problem on its board since my good hard drive didn't work. But the broken hard drive doesn't work with the good board as well: it can be recognized but when I insert a Windows Instalation DVD it says the hard drive is 0GB. I put it in a case and use it in another computer via USB, and but it doesn't show up in the "My Computer". I used a software to recover files called "GetDataBack for NTFS", it recognized the hard drive but with the wrong size (2TB). I try to make it read the hard drive but it got an I/O error reading sector. It tries to read, the hard drive spins up. So, since I'm using a good board on it, the problem seems to be internal. Is there anything someone could do to recover the files from it?

  Read the article

• Process killing trouble

  - by Aditya Singh

  I am trying to program a server software which involves a lot of testing on java / scala platform. Whenever i compile and execute the code. It starts listening on port 80. Sometimes i need to terminate it by Ctrl+C when it hangs. In that case, ubuntu is not freeing the port. So in order to run the process, i have to restart the machine. I see this at ps aux root 1924 0.0 0.0 5796 1660 pts/0 T 05:44 0:00 sudo scala - root 1925 0.2 1.5 491448 40796 pts/0 Tl 05:44 0:03 java -Xmx256M -Xms16M So process 1924 and 1925. I did sudo kill on both these. But then they keep on persisting even after a long time. sudo nmap -T Aggressive -A -v 127.0.0.1 -p 1-65000 Scanning localhost (127.0.0.1) [65000 ports] Discovered open port 80/tcp on 127.0.0.1 It means its still there ! sudo netstat --tcp --udp --listening --program tcp6 0 0 [::]:www [::]:* LISTEN 1925/java tcp6 0 0 ip6-localhost:ipp [::]:* LISTEN 1185/cupsd This means its 1925 - java How to kill it.

  Read the article

• 1000Base-X layer 2/MAC address details

  - by user69971

  A layer 2 Ethernet frame is sent with a source and destination MAC address. Given a 100Base-TX (copper) trunk between two Cisco switches, I can do a "show interface fa 0/0" on S1 to see the MAC address assigned to the trunking interface, then go to Switch2 and do a "show mac address-table" and find the MAC address of the S1 fa 0/0 interface as a dynamically learned MAC in the table. Given a similar setup with a 1000Base-X (fiber GBIC) trunk, the MAC address shown in "show interface gi 0/0" on S1 does not show up in the MAC address-table of S2. Everything I can find online indicates that 1000Base-X uses largely the same layer 2 format as copper connections. There's some slight alterations - minimum frame size is slightly larger - but the fundamentals of the frame structure appear to be the same, including transmission with a source and destination L2 address. Why doesn't the address of gi 0/0 show up in the MAC address table of the connection switch? The only thing which seems to make sense would be that the GBIC has its own MAC address, almost as if its acting as a mini 2-port switch or hub, with the switch-assigned MAC address showing up on the interface connection and a different MAC address assigned to the fiber side. If this is the case, is there any way to see the GBIC MAC address on the switch? (I've tried to look up the details in IEEE 802.3z but it doesn't seem to be available without an IEEE membership or purchasing the standard. I find the base 802.3 PDFs for download, but not 802.3z.)

  Read the article

• Magento Apache Config & Memory Issues

  - by cheshirepine

  I have a Magento installation on a VPS that is giving me a headache. This particular VPS has a reasonable spec - 2gb Memory and 50gb storage. It runs a single domain, with a single Magento install - and nothing else. About 5 months ago we started having issues. Every so often (about once every 2 or 3 weeks) the VPS would crash - all processes stopped and the only way to restart the container is via Virtuozzo. Now, however its 2 or 3 times a week. My VPS hosts confirm I am breaching the 2gb memory limit, at which point all VPS processes are killed to stop it bringing the entire node down. I have not made any config changes to it at all - I was running New Relic on it for a short while, but have removed that in case it was contributing to the issues. I can see nothing in the logs which indicates an issue and we have no CRON jobs running at the time the crashes happen. The site generates steady, but not huge amounts of traffic (averaging usually less than 100 visits per day) Is there anything in particular I should have done to the Apache or PHP configs to help? Im not a massivley experienced Apache admin, but know more than enough to solve most problems... Failing that, any other ideas that might help? Can't afford for this site to be down this much.

  Read the article

< Previous Page | 624 625 626 627 628 629 630 631 632 633 634 635  | Next Page >