Search Results

Search found 59254 results on 2371 pages for 'http host'.

Page 63/2371 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

• VMware ESX 3.5 Host Health shown as unknown

  - by dunxd

  I have an ESX 3.5 update 5 cluster of five host servers, all fully patched as of this Friday. Today I noticed that one of the servers has the Hardware Health status as unknown in Virtual Center Infrastructure Client. When I look at the Health Status view under configuration for that host, all the items are status Unknown. The server is exactly the same configuration as the others - same model (HP DL360 G5), memory, NICs etc. I have tried restarting the management service with service mgmt-vmware restart but this has not resolved the issue. Asides from this, I am not seeing any issues with the cluster - however, I hate having a blind spot like this. Any ideas?

  Read the article

• Element host loading time issue with winforms

  - by Vinjamuri

  I have an element host with 3 WPF controls. I am placing the element host on a winform. When my application is coming up, the element host is taking few seconds and the winform is getting displayed as a blank screen. How to fix this? Any ideas are appreciated. Basically, I don't want to display the blank screen as it looks ugly when the application is coming up.

  Read the article

• How do HTTP proxy caches decide between serving identity- vs. gzip-encoded resources?

  - by mrclay

  An HTTP server uses content-negotiation to serve a single URL identity- or gzip-encoded based on the client's Accept-Encoding header. Now say we have a proxy cache like squid between clients and the httpd. If the proxy has cached both encodings of a URL, how does it determine which to serve? The non-gzip instance (not originally served with Vary) can be served to any client, but the encoded instances (having Vary: Accept-Encoding) can only be sent to a clients with the identical Accept-Encoding header value as was used in the original request. E.g. Opera sends "deflate, gzip, x-gzip, identity, *;q=0" but IE8 sends "gzip, deflate". According to the spec, then, caches shouldn't share content-encoded caches between the two browsers. Is this true?

  Read the article

• Private Git repo using Smart HTTP with LDAP authentification

  - by ALOToverflow

  I've been crawling the interwebz and getting my hands dirty for the last few days, but I can't seem to make it all work together. I managed to get a HTTP repo working with Ubuntu 10.04 over Smart HTTP (pull and push over HTTP) for a single repo. This means that I do the initial setup over SSH to the server (git init --bare) and after that the clients can pull and push to it (git clone http://servername/allgitrepos/repo.git). Unfortunately it's impossible to add a new repo without SSHing to the server and adding it manually) i.e. git push http://servername/allgitrepos/repo2.git (allgitrepos is available for everyone to read-write and execute) would fail talking about git update-server-info (which seems to be a general error message). So far the repository is anonymous, so I would like to authenticate using LDAP and also use the LDAP creds to make the git commit. So, how can I push new repos to the server and how can I use the LDAP creds to make the git commit. Thanks

  Read the article

• How to use CLEAR USB WiMax in Ubuntu (host) and Windows XP (guest) using VirtualBox

  - by bithacker

  I'm trying to use CLEAR Motorola WiMax USB in Ubuntu as there is no support for Linux as yet. I've installed Windows XP as guest in Ubuntu and the version I'm using is 3.2.2. USB is connecting fine in Windows XP but I can't use internet in Ubuntu. Can you please tell me how to do it. Here is the configuration that could help you guys. Thanks in advance. I'm using Two Network Adapters. Network Adapter 1: PCnet-FAST III (NAT) Adapter 2: PCnet-FAST III (Host-only adapter, 'vboxnet0') ipconfig [on Guest windowsXP] Windows IP Configuration Ethernet adapter Local Area Connection: PCnet-FAST III (NAT) Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 10.0.2.15 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.2.2 Ethernet adapter Local Area Connection 3: PCnet-FAST III (Host-only adapter, 'vboxnet0') Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.56.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : CLEAR Motorola USB IP Address. . . . . . . . . . . . : 10.168.242.33 Subnet Mask . . . . . . . . . . . : 255.255.192.0 Default Gateway . . . . . . . . . : 10.168.192.2 IFCONFIG [on Host Ubuntu] (Ethernet) eth0 Link encap:Ethernet HWaddr 00:14:22:b9:9d:76 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 (Wireless) Link encap:Ethernet HWaddr 00:13:ce:f0:9b:0d inet6 addr: fe80::213:ceff:fef0:9b0d/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:84 (84.0 B) Interrupt:17 Base address:0xe000 Memory:dfcff000-dfcfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2292 errors:0 dropped:0 overruns:0 frame:0 TX packets:2292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:171952 (171.9 KB) TX bytes:171952 (171.9 KB) vboxnet0 Link encap:Ethernet HWaddr 0a:00:27:00:00:00 inet addr:192.168.56.1 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:21174 (21.1 KB)

  Read the article

• How to add http headers in suds 0.3.6?

  - by Esabe

  Hi everyone, I have an application in python 2.5 which sends data through suds 0.3.6. The problem is that the data contains non-ascii characters, so I need the following header to exist in the soap message: Content-Type="text/html; charset="utf-8" and the header that exists in the SOAP message is just: Content-Type="text/html" I know that it is fixed in suds 0.4, but it requires Python2.6 and I NEED Python2.5 because I use CentOS and it needs that version. So the question is: How could I change or add new HTTP headers to a SOAP message?

  Read the article

• Cannot access SVN repository from another host within the LAN

  - by akaii

  I'm trying to connect to a repository I've set up on our server from another host on the same network, but the connection is failing. checkout command: svn checkout svn://192.168.11.192/ error: Can't connect to host '192.168.11.192' : Connection refused I tried probing port 3690 with telnet, and I can't seem to connect that way either. I thought the port might be blocked, so I added an entry for port 3690 in sysconfig/iptables, but it doesn't seem to have had any effect at all. I'm sure svnserve is running, because I can checkout the repository on server using the same command above. What can I possibly try next?

  Read the article

• Connecting guest OS to host os internet connection hyper-v

  - by autrevo

  Hyper-V internal switch and VM OS interfacing with Guest OS and IP Cofiguration When configuring hyper-v internal switch, Apart from physical lan adapter (say adapter 1), I see another LAN adapter (say adapter 2) added in host os. And we already have one virtual lan adapter in guest os, (say adapter 3) . adapter 1 is connected to internet with defaulty gateway say, 192.168.0.254 and uses class C IP. By con configuring adapter 2 and 3, I need to acheive two purpose - Access internet in guest os. seemlessly share files & folders between guest and host OS. Please, suggest, What is the best way to configure IP of these three adapters ?

  Read the article

• Table 'mysql.host' doesn't exist

  - by eriktm

  100913 10:21:29 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql /usr/local/mysql/libexec/mysqld: Table 'mysql.plugin' doesn't exist 100913 10:21:29 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 100913 10:21:29 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exist 100913 10:21:29 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended This is the output from the log-file for mysqld I get when I try to start mysqld with the mysqld_safe command. I tried to run mysql_upgrade to correct the first error, but this command seems to require the server to be started, which is my original problem. Next, it says that the table mysql.host does not exist. I was unable to figure out what this is caused by.

  Read the article

• How can I upload data using ftp, http, or a socket from a spreadsheet with VBA for Microsoft Office?

  - by luiscolorado

  I have an Excel spreadsheet, and I want to put a button on it, so users will be able to upload their data to an http/ftp server, or send the data to the server using a socket directly. I have noticed that some people creates an ftp script to do. First of all, I'm not sure that everybody has ftp on their Windows machine, and secondly, I would prefer to use a method that allows me to better monitor the progress of the upload. For example, I want to know if the user id/password failed, if the transmission completed successfully, of if there were any other kind of errors with the receiving server. Thank you.

  Read the article

• Adding Internal DNS server in Host file

  - by Param

  I have added Global DNS server ip address to one of my Desktop ( please see the Network configuration screenshot ). and after that i have added my both domain controller ip address in host file, and it is working fine. ( please see the below screen-shot for your reference ) Can you please guide, what problem can i face if i kept my configuration in this way. but i am wondering, can this setting can create a problem? because the computer will be able to reach corp.abc.com easily, with the help of host file.

  Read the article

• Nginx Virtual Host upstream error

  - by TenJack

  I'm trying to add another virtual host and it keeps giving me this: host not found in upstream "domain1" error, even though I have changed the upstream from domain1 to something else in my sites-enabled file. It used to be domain1, but it's almost as if nginx is caching this value somewhere. This is what my sites-available/mysite.com file looks like: upstream mysite { server 127.0.0.1:5000; } server { listen 80; server_name www.mysite.com; rewrite ^/(.*)$ http://mysite.com/$1 permanent; } } And my thin server is running on port 5000 for this.

  Read the article

• Capture virtual machine traffic in Fiddler

  - by HtS

  I'm running Ubuntu in a virtual machine (host machine is Windows 7). Is it possible to use Fiddler in the host machine to capture the traffic from the virtual machine? Seeing as the virtual machine's network must be passing through the host computers NIC, can Fiddler capture the packets? (I don't know of any free alternative to Fiddler for Linux, except Tamper Data, but I need a bit more control). Thanks.

  Read the article

• vmware host stuck after adding a virtual drive to client

  - by Saariko

  I use ESXi 5.0 I created a virtual (400GB) drive (located on an iSCSI mapped drive), and tried to add it to a specific client on the host. The task has stopped at 11%. After over an hour, it seems that everything is pretty stuck. Looking at the datastore - it says that 400GB are allocated, but I don't see the new drive with the client. How can I check if the process is still working? or should I restart the host and pray for good?

  Read the article

• Network unreachable on Ubuntu guest after trying to set up a host only network on Virtualbox

  - by gkb0986

  I have a Mac OS X host and a bunch of guests including Ubuntu and Arch Linux. I was trying to set up a host-only network at eth1 to let me ssh into the system. But now eth0 isn't working properly either. Ubuntu can no longer connect to remote hosts or browse the internet. It tells me that the network is unreachable. What's gone wrong here? I've included some diagnostics below. $ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10968 errors:0 dropped:0 overruns:0 frame:0 TX packets:10968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:897264 (897.2 KB) TX bytes:897264 (897.2 KB) Other diagnostic commands and the output: $sudo lspci -n 00:00.0 0600: 8086:1237 (rev 02) 00:01.0 0601: 8086:7000 00:01.1 0101: 8086:7111 (rev 01) 00:02.0 0300: 80ee:beef 00:03.0 0200: 8086:100e (rev 02) 00:04.0 0880: 80ee:cafe 00:05.0 0401: 8086:2415 (rev 01) 00:06.0 0C03: 106B:003F 00:07.0 0680: 8086:7113 (REV 08) 00:0D.0 0106: 8086:2829 (REV 02) $sudo lshw -c network *-network DISABLED description: Ethernet interface product: 82540EM Gigabit Ethernet Controller vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 logical name: eth0 version: 02 serial: 08:00:27:7d:22:df size: 1Gbit/s capacity: 1Gbit/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k8-NAPI duplex=full firmware=N/A latency=64 link=no mingnt=255 multicast=yes port=twisted pair speed=1Gbit/s resources: irq:19 memory:f0000000-f001ffff ioport:d010(size=8) $lsmod Module Size Used by nls_utf8 12557 1 isofs 40257 1 vboxsf 43743 2 vesafb 13844 1 snd_intel8x0 38570 2 snd_ac97_codec 134869 1 snd_intel8x0 ac97_bus 12730 1 snd_ac97_codec snd_pcm 97275 2 snd_intel8x0,snd_ac97_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi rfcomm 47604 0 snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event bnep 18281 2 bluetooth 180113 10 rfcomm,bnep ppdev 17113 0 psmouse 97519 0 snd_timer 29990 2 snd_pcm,snd_seq joydev 17693 0 snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq vboxvideo 12622 1 serio_raw 13211 0 snd 79041 11 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd vboxguest 235498 7 vboxsf parport_pc 32866 0 drm 241971 2 vboxvideo i2c_piix4 13301 0 snd_page_alloc 18529 2 snd_intel8x0,snd_pcm mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp usbhid 47238 0 hid 99636 1 usbhid e1000 108589 0

  Read the article

• 505 (HTTP version not supported) sent to client when ASP.NET application attempts to access WCF service

  - by Aaron J Spetner

  We have created a DLL to facilitate access of a 3rd-party WCF Service. This DLL works fine in a Windows Application on our test machines, but when we try to use it in an ASP.NET application on our web server, our web server returns a 505 HTTP version not supported error to the client. To clarify, the setup is Client-Server-WCF Service. Using Fiddler, I can tell that our server is not making requests to the WCF Service. The calls are wrapped in a try/catch block, but no Exception occurs. Instead, as soon as the call to the service is attempted, our server returns a 505 error to the client and terminates execution. We are using clientCertificate authentication over HTTPS with serviceCertificate certificateValidationMode set to "None". Thanks

  Read the article

• iptables block everything except http

  - by arminb

  I'm trying to configure my iptables to block any network traffic except HTTP: iptables -P INPUT DROP #set policy of INPUT to DROP iptables -P OUTPUT DROP #set policy of OUTPUT to DROP iptables -A INPUT -p tcp --sport 80 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A OUTPUT -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT The iptables output (iptables -L -v) gives me: Chain INPUT (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 4 745 ACCEPT tcp -- any any anywhere anywhere tcp spt:http state RELATED,ESTABLISHED Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 2 330 ACCEPT tcp -- any any anywhere anywhere tcp dpt:http state NEW,ESTABLISHED When I try to wget 127.0.0.1 (yes i do have a web server and it works fine) i get: --2012-11-14 16:29:01-- http://127.0.0.1/ Connecting to 127.0.0.1:80... The request never finishes. What am I doing wrong? I'm setting iptables to DROP everything by default and add a rule to ACCEPT HTTP.

  Read the article

• mod_proxy Fowarding Based on Request Host Header

  - by zigzagip

  Lets say I have 3 URLs and they all point to the same reverse proxy. I would like to have the requests being forwarded to the web servers behind the proxy based on the host header: webfront1.example.com > reverseproxy.example.com > backend1.example.com webfront2.example.com > reverseproxy.example.com > backend2.example.com webfront3.example.com > reverseproxy.example.com > backend3.example.com Based on what I have read, I can configure reverseproxy.example.com/webfront1 > backend1.example.com, reverseproxy.example.com/webfront2 > backend2.example.com, etc. I am wondering if proxy based on host header is even possible or if I used the wrong approach entirely.

  Read the article

• Is there anything in the FTP protocol like the HTTP Range header?

  - by Cheeso

  Suppose I want to transfer just a portion of a file over FTP - is it possible using a standard FTP protocol? In HTTP I could use a Range header in the request to specify the data range of the remote resource. If it's a 1mb file, I could ask for the bytes from 600k to 700k. Is there anything like that in FTP? I am reading the FTP RFC, don't see anything, but want to make sure I'm not missing anything. There's a Restart command in FTP - would that work?

  Read the article

• Capture virtual machine traffic in Fiddler

  - by HtS

  I'm running Ubuntu in a virtual machine (host machine is Windows 7). Is it possible to use Fiddler in the host machine to capture the traffic from the virtual machine? Seeing as the virtual machine's network must be passing through the host computers NIC, can Fiddler capture the packets? (I don't know of any free alternative to Fiddler for Linux, except Tamper Data, but I need a bit more control). Thanks.

  Read the article

• Valid path to deploy vm on host

  - by ELSheepO

  I've recently added a VM to the library in SCVMM to use with MS Test Pro 2010, and run into a problem. I cannot import it using test pro, it just won't give me any option to import in the lab manager. Also, if I try to deploy it back to the host it came from, it gives me a error saying the path is not valid. Anyone have any insight into this? Also, SCVMM seems to freeze everytime I try to create a new VM from the template of the VM I've stored in the library, the same one thats giving me the problem when I try to deploy it on to the host. Thanks.

  Read the article

• Sharing files between centOS on virtualbox and windows 7 as the host

  - by Wasswa Samuel

  I have centOS 5.5 installed on virtual box it has no GUI so every thing is command based. I want to make a folder in centOS which i can share with my windows 7 host OS such that i can send files to and fro seamlessly. I am new to linux and i managed to install samba. I looked up some tips on net but i ended up getting confused and none of them worked. Can someone explain to me how i can do this in a straight forward way from how i can configure samba to how i can mount the folder such that it can be seen on the host operating system. I am completely lost.please help.

  Read the article

• Hyper-V can't connect from host to guest via RDC

  - by Mark

  As the title describes I would like to connect via Remote Desktop Connection to my VM. I want to use it as a Dev-machine and therefore would like to work full screen, as far as I understand RDC is the way to go. I have created an internal network connection within Hyper-V, assigned it to my VM, set a static IP/Subnet on guest (Win7 Pro) and host(Win8.1 Enterprise). It worked good for the first couple of times but now it seems to be broken or I have to do odd enable/disable network connection "dances" to get it running. Ping also doesn't work always so it does seem as if the guest and host would be "disconnected".. Is there something I can do so that the network connection always will be established?

  Read the article

• Connect to server in VMWare player while host is not connected to a network

  - by blockcipher

  Hello, I have a linux server VM on my host machine using VMWare player and if I'm on a network, I can connect to the web server on the VM via a web browser. However, I tried to do the same while I was disconnected from a network and I couldn't. The networking is set to Host-only and I did use dhclient/ifconfig to make sure that yes, I did have an IP address assigned to the VM. While I can work around this, the purpose of the VM is to allow us to demo our app from any machine and that machine may not be connected to a network. Thanks.

  Read the article

• Out of nowhere, ssh_exchange_identification: Connection closed by remote host

  - by disusered

  I am running Ubuntu 10.10 on a remote box. I ssh to it everyday without issues but today out of the blue, I get the following error: ssh_exchange_identification: Connection closed by remote host If I connect with -vv, I get the following: OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /Users/bla/.ssh/config debug1: Applying options for ubuntu-server debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ubuntu-server.com [123.123.123.123] port 22. debug1: Connection established. debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /Users/bla/.ssh/id_rsa type -1 debug1: identity file /Users/bla/.ssh/id_rsa-cert type -1 ssh_exchange_identification: Connection closed by remote host If I remove the key, I get the exact same output (sans "debug2: key_type_...). I've managed to log in physically and checked my hosts.allow and hosts.deny but they have no entries. I tried removing and reinstalling OpenSSH, checked authorized_keys and ~/.ssh permissions and tried connecting from other computers only to get the same error. I'm at my wits end, any help would be greatly appreciated.

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >