Search Results

Search found 21360 results on 855 pages for 'domain controller'.

Page 630/855 | < Previous Page | 626 627 628 629 630 631 632 633 634 635 636 637  | Next Page >

  • Designing interfaces: predict methods needed, discipline yourself and deal with code that comes to m

    - by fireeyedboy
    Was: Design by contract: predict methods needed, discipline yourself and deal with code that comes to mind I like the idea of designing by contract a lot (at least, as far as I understand the principal). I believe it means you define intefaces first before you start implementing actual code, right? However, from my limited experience (3 OOP years now) I usually can't resist the urge to start coding pretty early, for several reasons: because my limited experience has shown me I am unable to predict what methods I will be needing in the interface, so I might as well start coding right away. or because I am simply too impatient to write out the whole interfaces first. or when I do try it, I still wind up implementing bits of code already, because I fear I might forget this or that imporant bit of code, that springs to mind when I am designing the interfaces. As you see, especially with the last two points, this leads to a very disorderly way of doing things. Tasks get mixed up. I should draw a clear line between designing interfaces and actual coding. If you, unlike me, are a good/disciplined planner, as intended above, how do you: ...know the majority of methods you will be needing up front so well? Especially if it's components that implement stuff you are not familiar with yet. ...resist the urge to start coding right away? ...deal with code that comes to mind when you are designing the interfaces? UPDATE: Thank you for the answers so far. Valuable insights! And... I stand corrected; it seems I misinterpreted the idea of Design By Contract. For clarity, what I actually meant was: "coming up with interface methods before implementing the actual components". An additional thing that came up in my mind is related to point 1): b) How do you know the majority of components you will be needing. How do you flesh out these things before you start actually coding? For arguments sake, let's say I'm a novice with the MVC pattern, and I wanted to implement such a component/architecture. A naive approach would be to think of: a front controller some abstract action controller some abstract view ... and be done with it, so to speak. But, being more familiar with the MVC pattern, I know now that it makes sense to also have: a request object a router a dispatcher a response object view helpers etc.. etc.. If you map this idea to some completely new component you want to develop, with which you have no experience yet; how do you come up with these sort of additional components without actually coding the thing, and stuble upon the ideas that way? How would you know up front how fine grained some components should be? Is this a matter of disciplining yourself to think it out thoroughly? Or is it a matter of being good at thinking in abstractions?

    Read the article

  • AT91SAM7X512's SPI peripheral gets disabled on write to SPI_TDR

    - by Dor
    My AT91SAM7X512's SPI peripheral gets disabled on the X time (X varies) that I write to SPI_TDR. As a result, the processor hangs on the while loop that checks the TDRE flag in SPI_SR. This while loop is located in the function SPI_Write() that belongs to the software package/library provided by ATMEL. The problem occurs arbitrarily - sometimes everything works OK and sometimes it fails on repeated attempts (attemp = downloading the same binary to the MCU and running the program). Configurations are (defined in the order of writing): SPI_MR: MSTR = 1 PS = 0 PCSDEC = 0 PCS = 0111 DLYBCS = 0 SPI_CSR[3]: CPOL = 0 NCPHA = 1 CSAAT = 0 BITS = 0000 SCBR = 20 DLYBS = 0 DLYBCT = 0 SPI_CR: SPIEN = 1 After setting the configurations, the code verifies that the SPI is enabled, by checking the SPIENS flag. I perform a transmission of bytes as follows: const short int dataSize = 5; // Filling array with random data unsigned char data[dataSize] = {0xA5, 0x34, 0x12, 0x00, 0xFF}; short int i = 0; volatile unsigned short dummyRead; SetCS3(); // NPCS3 == PIOA15 while(i-- < dataSize) { mySPI_Write(data[i]); while((AT91C_BASE_SPI0->SPI_SR & AT91C_SPI_TXEMPTY) == 0); dummyRead = SPI_Read(); // SPI_Read() from Atmel's library } ClearCS3(); /**********************************/ void mySPI_Write(unsigned char data) { while ((AT91C_BASE_SPI0->SPI_SR & AT91C_SPI_TXEMPTY) == 0); AT91C_BASE_SPI0->SPI_TDR = data; while ((AT91C_BASE_SPI0->SPI_SR & AT91C_SPI_TDRE) == 0); // <-- This is where // the processor hangs, because that the SPI peripheral is disabled // (SPIENS equals 0), which makes TDRE equal to 0 forever. } Questions: What's causing the SPI peripheral to become disabled on the write to SPI_TDR? Should I un-comment the line in SPI_Write() that reads the SPI_RDR register? Means, the 4th line in the following code: (The 4th line is originally marked as a comment) void SPI_Write(AT91S_SPI *spi, unsigned int npcs, unsigned short data) { // Discard contents of RDR register //volatile unsigned int discard = spi->SPI_RDR; /* Send data */ while ((spi->SPI_SR & AT91C_SPI_TXEMPTY) == 0); spi->SPI_TDR = data | SPI_PCS(npcs); while ((spi->SPI_SR & AT91C_SPI_TDRE) == 0); } Is there something wrong with the code above that transmits 5 bytes of data? Please note: The NPCS line num. 3 is a GPIO line (means, in PIO mode), and is not controlled by the SPI controller. I'm controlling this line by myself in the code, by de/asserting the ChipSelect#3 (NPCS3) pin when needed. The reason that I'm doing so is because that problems occurred while trying to let the SPI controller to control this pin. I didn't reset the SPI peripheral twice, because that the errata tells to reset it twice only if I perform a reset - which I don't do. Quoting the errata: If a software reset (SWRST in the SPI Control Register) is performed, the SPI may not work properly (the clock is enabled before the chip select.) Problem Fix/Workaround The SPI Control Register field, SWRST (Software Reset) needs to be written twice to be cor- rectly set. I noticed that sometimes, if I put a delay before the write to the SPI_TDR register (in SPI_Write()), then the code works perfectly and the communications succeeds. Useful links: AT91SAM7X Series Preliminary.pdf ATMEL software package/library spi.c from Atmel's library spi.h from Atmel's library An example of initializing the SPI and performing a transfer of 5 bytes is highly appreciated and helpful.

    Read the article

  • How to bind dropdownlist data to complex class?

    - by chobo2
    Hi I am using asp.net mvc 2.0(default binding model) and I have this problem. I have a strongly typed view that has a dropdownlist <%= Html.DropDownList("List", "-----")%> Now I have a model class like Public class Test() { public List { get; set; } public string Selected {get; set;} } Now I have in my controller this public ActionResult TestAction() { Test ViewModel = new Test(); ViewModel.List = new SelectList(GetList(), "value", "text", "selected"); return View(Test); } [AcceptVerbs(HttpVerbs.Post)] public ActionResult TestAction(Test ViewModel) { return View(); } Now when I load up the TestAction page for the first time it populates the dropdown list as expected. Now I want to post the selected value back to the server(the dropdownlist is within a form tag with some other textboxes). So I am trying to bind it automatically when it comes in as seen (Test ViewModel) However I get this big nasty error. Server Error in '/' Application. No parameterless constructor defined for this object. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.MissingMethodException: No parameterless constructor defined for this object. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [MissingMethodException: No parameterless constructor defined for this object.] System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) +0 System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache) +98 System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean skipCheckThis, Boolean fillCache) +241 System.Activator.CreateInstance(Type type, Boolean nonPublic) +69 System.Activator.CreateInstance(Type type) +6 System.Web.Mvc.DefaultModelBinder.CreateModel(ControllerContext controllerContext, ModelBindingContext bindingContext, Type modelType) +403 System.Web.Mvc.DefaultModelBinder.BindSimpleModel(ControllerContext controllerContext, ModelBindingContext bindingContext, ValueProviderResult valueProviderResult) +544 System.Web.Mvc.DefaultModelBinder.BindModel(ControllerContext controllerContext, ModelBindingContext bindingContext) +479 System.Web.Mvc.DefaultModelBinder.GetPropertyValue(ControllerContext controllerContext, ModelBindingContext bindingContext, PropertyDescriptor propertyDescriptor, IModelBinder propertyBinder) +45 System.Web.Mvc.DefaultModelBinder.BindProperty(ControllerContext controllerContext, ModelBindingContext bindingContext, PropertyDescriptor propertyDescriptor) +658 System.Web.Mvc.DefaultModelBinder.BindProperties(ControllerContext controllerContext, ModelBindingContext bindingContext) +147 System.Web.Mvc.DefaultModelBinder.BindComplexElementalModel(ControllerContext controllerContext, ModelBindingContext bindingContext, Object model) +98 System.Web.Mvc.DefaultModelBinder.BindComplexModel(ControllerContext controllerContext, ModelBindingContext bindingContext) +2504 System.Web.Mvc.DefaultModelBinder.BindModel(ControllerContext controllerContext, ModelBindingContext bindingContext) +548 System.Web.Mvc.ControllerActionInvoker.GetParameterValue(ControllerContext controllerContext, ParameterDescriptor parameterDescriptor) +474 System.Web.Mvc.ControllerActionInvoker.GetParameterValues(ControllerContext controllerContext, ActionDescriptor actionDescriptor) +181 System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) +830 System.Web.Mvc.Controller.ExecuteCore() +136 System.Web.Mvc.ControllerBase.Execute(RequestContext requestContext) +111 System.Web.Mvc.ControllerBase.System.Web.Mvc.IController.Execute(RequestContext requestContext) +39 System.Web.Mvc.<>c__DisplayClass8.<BeginProcessRequest>b__4() +65 System.Web.Mvc.Async.<>c__DisplayClass1.<MakeVoidDelegate>b__0() +44 System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _) +42 System.Web.Mvc.Async.WrappedAsyncResult`1.End() +141 System.Web.Mvc.Async.AsyncResultWrapper.End(IAsyncResult asyncResult, Object tag) +54 System.Web.Mvc.Async.AsyncResultWrapper.End(IAsyncResult asyncResult, Object tag) +40 System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +52 System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +38 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8836913 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +184 So how can I do this?

    Read the article

  • java.sql.SQLException: Unsupported feature

    - by Raja Chandra Rangineni
    Hello All, I am using the JPA(hibernate) for the ORM and c3po for connection pooling. While I am able to do all the CRUD operations it gives me the below error while accessing the the data: Here are the tools: Hibernate 3.2.1, Oracle 10g, ojdbc14, connection pool: c3p0-0.9, stack trace: java.sql.SQLException: Unsupported feature at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134) at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179) at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269) at oracle.jdbc.dbaccess.DBError.throwUnsupportedFeatureSqlException(DBError.java:689) at oracle.jdbc.OracleDatabaseMetaData.supportsGetGeneratedKeys(OracleDatabaseMetaData.java:4180) at com.mchange.v2.c3p0.impl.NewProxyDatabaseMetaData.supportsGetGeneratedKeys(NewProxyDatabaseMetaData.java:3578) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.hibernate.cfg.SettingsFactory.buildSettings(SettingsFactory.java:91) at org.hibernate.cfg.Configuration.buildSettings(Configuration.java:2006) at org.hibernate.cfg.Configuration.buildSessionFactory(Configuration.java:1289) at org.hibernate.cfg.AnnotationConfiguration.buildSessionFactory(AnnotationConfiguration.java:915) at org.hibernate.ejb.Ejb3Configuration.buildEntityManagerFactory(Ejb3Configuration.java:730) at org.hibernate.ejb.HibernatePersistence.createEntityManagerFactory(HibernatePersistence.java:121) at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:51) at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:33) at com.bbn.dbservices.test.BillabilityPeriodsTest.getBillPeriods(BillabilityPeriodsTest.java:33) at com.bbn.dbservices.controller.ServiceController.generateReportsTest(ServiceController.java:355) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.springframework.web.bind.annotation.support.HandlerMethodInvoker.doInvokeMethod(HandlerMethodInvoker.java:654) at org.springframework.web.bind.annotation.support.HandlerMethodInvoker.invokeHandlerMethod(HandlerMethodInvoker.java:160) at org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter.invokeHandlerMethod(AnnotationMethodHandlerAdapter.java:378) at org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter.handle(AnnotationMethodHandlerAdapter.java:366) at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:781) at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:726) at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:636) at org.springframework.web.servlet.FrameworkServlet.doGet(FrameworkServlet.java:545) at javax.servlet.http.HttpServlet.service(HttpServlet.java:617) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454) at java.lang.Thread.run(Thread.java:619) java.sql.SQLException: Unsupported feature at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134) at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179) at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269) at oracle.jdbc.dbaccess.DBError.throwUnsupportedFeatureSqlException(DBError.java:689) at oracle.jdbc.OracleDatabaseMetaData.supportsGetGeneratedKeys(OracleDatabaseMetaData.java:4180) at com.mchange.v2.c3p0.impl.NewProxyDatabaseMetaData.supportsGetGeneratedKeys(NewProxyDatabaseMetaData.java:3578) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.hibernate.cfg.SettingsFactory.buildSettings(SettingsFactory.java:91) at org.hibernate.cfg.Configuration.buildSettings(Configuration.java:2006) at org.hibernate.cfg.Configuration.buildSessionFactory(Configuration.java:1289) at org.hibernate.cfg.AnnotationConfiguration.buildSessionFactory(AnnotationConfiguration.java:915) at org.hibernate.ejb.Ejb3Configuration.buildEntityManagerFactory(Ejb3Configuration.java:730) at org.hibernate.ejb.HibernatePersistence.createEntityManagerFactory(HibernatePersistence.java:121) at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:51) at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:33) at com.bbn.dbservices.test.BillabilityPeriodsTest.getBillPeriods(BillabilityPeriodsTest.java:33) at com.bbn.dbservices.controller.ServiceController.generateReportsTest(ServiceController.java:355) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.springframework.web.bind.annotation.support.HandlerMethodInvoker.doInvokeMethod(HandlerMethodInvoker.java:654) at org.springframework.web.bind.annotation.support.HandlerMethodInvoker.invokeHandlerMethod(HandlerMethodInvoker.java:160) at org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter.invokeHandlerMethod(AnnotationMethodHandlerAdapter.java:378) at org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter.handle(AnnotationMethodHandlerAdapter.java:366) at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:781) at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:726) at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:636) at org.springframework.web.servlet.FrameworkServlet.doGet(FrameworkServlet.java:545) at javax.servlet.http.HttpServlet.service(HttpServlet.java:617) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454) at java.lang.Thread.run(Thread.java:619) Any help with this is greatly appreciated. Thanks, Raja Chandra Rangineni. enter code here

    Read the article

  • Get User SID From Logon ID (Windows XP and Up)

    - by Dave Ruske
    I have a Windows service that needs to access registry hives under HKEY_USERS when users log on, either locally or via Terminal Server. I'm using a WMI query on win32_logonsession to receive events when users log on, and one of the properties I get from that query is a LogonId. To figure out which registry hive I need to access, now, I need the users's SID, which is used as a registry key name beneath HKEY_USERS. In most cases, I can get this by doing a RelatedObjectQuery like so (in C#): RelatedObjectQuery relatedQuery = new RelatedObjectQuery( "associators of {Win32_LogonSession.LogonId='" + logonID + "'} WHERE AssocClass=Win32_LoggedOnUser Role=Dependent" ); where "logonID" is the logon session ID from the session query. Running the RelatedObjectQuery will generally give me a SID property that contains exactly what I need. There are two issues I have with this. First and most importantly, the RelatedObjectQuery will not return any results for a domain user that logs in with cached credentials, disconnected from the domain. Second, I'm not pleased with the performance of this RelatedObjectQuery --- it can take up to several seconds to execute. Here's a quick and dirty command line program I threw together to experiment with the queries. Rather than setting up to receive events, this just enumerates the users on the local machine: using System; using System.Collections.Generic; using System.Text; using System.Management; namespace EnumUsersTest { class Program { static void Main( string[] args ) { ManagementScope scope = new ManagementScope( "\\\\.\\root\\cimv2" ); string queryString = "select * from win32_logonsession"; // for all sessions //string queryString = "select * from win32_logonsession where logontype = 2"; // for local interactive sessions only ManagementObjectSearcher sessionQuery = new ManagementObjectSearcher( scope, new SelectQuery( queryString ) ); ManagementObjectCollection logonSessions = sessionQuery.Get(); foreach ( ManagementObject logonSession in logonSessions ) { string logonID = logonSession["LogonId"].ToString(); Console.WriteLine( "=== {0}, type {1} ===", logonID, logonSession["LogonType"].ToString() ); RelatedObjectQuery relatedQuery = new RelatedObjectQuery( "associators of {Win32_LogonSession.LogonId='" + logonID + "'} WHERE AssocClass=Win32_LoggedOnUser Role=Dependent" ); ManagementObjectSearcher userQuery = new ManagementObjectSearcher( scope, relatedQuery ); ManagementObjectCollection users = userQuery.Get(); foreach ( ManagementObject user in users ) { PrintProperties( user.Properties ); } } Console.WriteLine( "\nDone! Press a key to exit..." ); Console.ReadKey( true ); } private static void PrintProperty( PropertyData pd ) { string value = "null"; string valueType = "n/a"; if ( null == pd.Value ) value = "null"; if ( pd.Value != null ) { value = pd.Value.ToString(); valueType = pd.Value.GetType().ToString(); } Console.WriteLine( " \"{0}\" = ({1}) \"{2}\"", pd.Name, valueType, value ); } private static void PrintProperties( PropertyDataCollection properties ) { foreach ( PropertyData pd in properties ) { PrintProperty( pd ); } } } } So... is there way to quickly and reliably obtain the user SID given the information I retrieve from WMI, or should I be looking at using something like SENS instead?

    Read the article

  • ngGrid reusable filter AngularJS

    - by wootscootinboogie
    I have a business requirement that I filter a boolean value in my ngGrid. The filter has three states: only true, only false and both. Filtering like this seems to be a common enough use case that I should refactor that functionality out of my code for re use (possibly in a directive/filter?). I'd like to know how I can go about pulling out the customFilter function in my controller and make it so that I can pass the filter a property name on which to filter, and a value for selectedFilterOption. The code currently works, but I feel like this is a good chance to get better at angular :). So how can I pull out my filtering used here and make it a reusable piece of functionality? app.controller('DocumentController',function($scope,DocumentService) { $scope.filterOptions = { filterText: '', useExternalFilter: false }; $scope.totalServerItems =0; $scope.pagingOptions ={ pageSizes: [5,10,100], pageSize: 5, currentPage: 1 } //filter! $scope.dropdownOptions = [{ name: 'Show all' },{ name: 'Show active' },{ name: 'Show trash' }]; //default choice for filtering is 'show active' $scope.selectedFilterOption = $scope.dropdownOptions[1]; //three stage bool filter $scope.customFilter = function(data){ var tempData = []; angular.forEach(data,function(item){ if($scope.selectedFilterOption.name === 'Show all'){ tempData.push(item); } else if($scope.selectedFilterOption.name ==='Show active' && !item.markedForDelete){ tempData.push(item); } else if($scope.selectedFilterOption.name ==='Show trash' && item.markedForDelete){ tempData.push(item); } }); return tempData; } //grabbing data $scope.getPagedDataAsync = function(pageSize, page, filterValue, searchText){ var data; if(searchText){ var ft = searchText.toLowerCase(); DocumentService.get('filterableData.json').success(function(largeLoad){ //filter the data when searching data = $scope.customFilter(largeLoad).filter(function(item){ return JSON.stringify(item).toLowerCase().indexOf(ft) != -1; }) $scope.setPagingData($scope.customFilter(data),page,pageSize); }) } else{ DocumentService.get('filterableData.json').success(function(largeLoad){ var testLargeLoad = $scope.customFilter(largeLoad); //filter the data on initial page load when no search text has been entered $scope.setPagingData(testLargeLoad,page,pageSize); }) } }; //paging $scope.setPagingData = function(data, page, pageSize){ var pagedData = data.slice((page -1) * pageSize, page * pageSize); //filter the data for paging $scope.myData = $scope.customFilter(pagedData); $scope.myData = pagedData; $scope.totalServerItems = data.length; if(!$scope.$$phase){ $scope.$apply(); } } //watch for filter option change, set the data property of gridOptions to the newly filtered data $scope.$watch('selectedFilterOption',function(){ var data = $scope.customFilter($scope.myData); $scope.myData = data; $scope.getPagedDataAsync($scope.pagingOptions.pageSize, $scope.pagingOptions.currentPage); $scope.setPagingData($scope.myData,$scope.pagingOptions.currentPage,$scope.pagingOptions.pageSize); }) $scope.$watch('pagingOptions',function(newVal, oldVal){ if(newVal !== oldVal && newVal.currentPage !== oldVal.currentPage){ $scope.getPagedDataAsync($scope.pagingOptions.pageSize,$scope.pagingOptions.currentPage,$scope.filterOptions.filterText); } },true) $scope.message ="This is a message"; $scope.gridOptions = { data: 'myData', enablePaging: true, showFooter:true, totalServerItems: 'totalServerItems', pagingOptions: $scope.pagingOptions, filterOptions: $scope.filterOptions, showFilter: true, enableCellEdit: true, showColumnMenu: true, enableColumnReordering: true, enablePinning: true, showGroupPanel: true, groupsCollapsedByDefault: true, enableColumnResize: true } //get the data on page load $scope.getPagedDataAsync($scope.pagingOptions.pageSize, $scope.pagingOptions.currentPage); }); HTML

    Read the article

  • How to load and pass a Xforms form in Orbeon (How to Send instance to XForms) ?

    - by Clem
    Hi, I am using the Orbeon Forms solution to generate messages from filled-in web forms. I read different code snippetse in Orbeon's wiki on XForms submission from a pipeline, and I tried different solutions but it doesn't work, and there is no example with a POST from a pipeline, caught by a PFC and sent to an XForms view that receives the posted data (all examples are done in the same page). I have the following pipeline which is received on his instance input: pipelineWrite.xpl <p:config ...> <p:param name="instance" type="input"/> <!-- instance containing the data of the form filled by user --> <p:param name="data" type="output"/> <p:processor name="oxf:java"> <!-- transforms the data into a file --> <p:input name="config"> <config sourcepath="." class="ProcessorWriteCUSDECCD001B"/> </p:input> <p:input name="input" href="#instance"/> <p:output name="output" id="file"/> <!-- XML containing the url of the file --> </p:processor> <p:processor name="oxf:xforms-submission"> <!-- post the XML to the success view --> <p:input name="submission"> <xforms:submission method="post" action="/CUSDECCD001B/success" /> </p:input> <p:input name="request" href="#file"/> <p:output name="response" ref="data"/> </p:processor> </p:config> Then there is the PFC which catch the actions : page-flow.xml <config xmlns="http://www.orbeon.com/oxf/controller"> <page path-info="/CUSDECCD001B/" view="View/ViewForm.xhtml"/> <!-- load the form to be filled in by user --> <page path-info="/CUSDECCD001B/write" model="Controller/PipelineWrite.xpl"/> <!-- send the instance of the form filled to the pipeline above --> <page path-info="/CUSDECCD001B/success" view="View/ViewSuccess.xhtml"/> <!-- send the instance containing the url of the file to the success view --> <epilogue url="oxf:/config/epilogue.xpl"/> </config> Then there is the success view, which is very simple : ViewSuccess.xhtml <html ... > <head> <title>Generation OK</title> <xforms:model> <xforms:instance id="FILE" src="input:instance"> <files xmlns=""> <file mediaType="" filename="" size="" /> </files> </xforms:instance> </xforms:model> </head> <body> Click here to download : <xforms:output ref="//file" appearance="xxforms:download"> <xforms:filename ref="@filename"/> <xforms:mediatype ref="@mediatype"/> <xforms:label>Download</xforms:label> </xforms:output> </body> </html> The problem is that the post is done well, the PFC catches the action well, load the correct view, but the view is loaded with no data (the view doesn't find the data on his instance input). I tried with a GET in the view to retrieve the POST data, and that's the same thing. No data is retrieved. So the download button doesn't work. I hope I'm clear enough to find a solution. Thanks in advance.

    Read the article

  • uiscrollview not switching image subviews

    - by nickthedude
    I'm building a comic viewer app, that consists of two view controllers, the root viewcontroller basically displays a view where a user decides what comic they want to read by pressing a button. The second viewController actually displays the comic as a uiscrollview with a toolbar and a title at the top. So the problem I am having is that the comic image panels themselves are not changing from whatever the first comic you go to if you select another comic after viewing the first one. The way I set it up, and I admit it's not exactly mvc, so please don't hate, anyway the way I set it up is each comic uiscrollview consists of x number of jpg images where each comic set's image names have a common prefix and then a number like 'funny1.jpg', 'funny2.jpg', 'funny3.jpg' and 'soda1.jpg', 'soda2.jpg', 'soda3.jpg', etc... so when a user selects a comic to view in the root controller it makes a call to the delegate and sets ivars on instances of the comicviewcontroller that belongs to the delegate (mainDelegate.comicViewController.property) I set the number of panels in that comic, the comic name for the title label, and the image prefix. The number of images changes(or at least the number that you can scroll through), and the title changes but for some reason the images are the same ones as whatever comic you clicked on initially. I'm basing this whole app off of the 'scrolling' code sample from apple. I thought if I added a viewWillAppear:(BOOL) animated call to the comicViewController everytime the user clicked the button that would fix it but it didn't, after all that is where the scrollview is laid out. Anyway here is some code from each of the two controllers: RootController: -(IBAction) launchComic2{ AppDelegate *mainDelegate = [(AppDelegate *) [UIApplication sharedApplication] delegate]; mainDelegate.myViewController.comicPageCount = 3; mainDelegate.myViewController.comicTitle.text = @"\"Death by ETOH\""; mainDelegate.myViewController.comicImagePrefix = @"etoh"; [mainDelegate.myViewController viewWillAppear:YES]; [mainDelegate.window addSubview: mainDelegate.myViewController.view]; comicViewController: -(void) viewWillAppear:(BOOL)animated { self.view.backgroundColor = [UIColor viewFlipsideBackgroundColor]; // 1. setup the scrollview for multiple images and add it to the view controller // // note: the following can be done in Interface Builder, but we show this in code for clarity [scrollView1 setBackgroundColor:[UIColor whiteColor]]; [scrollView1 setCanCancelContentTouches:NO]; scrollView1.indicatorStyle = UIScrollViewIndicatorStyleWhite; scrollView1.clipsToBounds = YES; // default is NO, we want to restrict drawing within our scrollview scrollView1.scrollEnabled = YES; // pagingEnabled property default is NO, if set the scroller will stop or snap at each photo // if you want free-flowing scroll, don't set this property. scrollView1.pagingEnabled = YES; // load all the images from our bundle and add them to the scroll view NSUInteger i; for (i = 1; i <= self.comicPageCount; i++) { NSString *imageName = [NSString stringWithFormat:@"%@%d.jpg", self.comicImagePrefix, i]; NSLog(@"%@%d.jpg", self.comicImagePrefix, i); UIImage *image = [UIImage imageNamed:imageName]; UIImageView *imageView = [[UIImageView alloc] initWithImage:image]; // setup each frame to a default height and width, it will be properly placed when we call "updateScrollList" CGRect rect = imageView.frame; rect.size.height = kScrollObjHeight; rect.size.width = kScrollObjWidth; imageView.frame = rect; imageView.tag = i; // tag our images for later use when we place them in serial fashion [scrollView1 addSubview:imageView]; [imageView release]; } [self layoutScrollImages]; // now place the photos in serial layout within the scrollview } - (void)layoutScrollImages { UIImageView *view = nil; NSArray *subviews = [scrollView1 subviews]; // reposition all image subviews in a horizontal serial fashion CGFloat curXLoc = 0; for (view in subviews) { if ([view isKindOfClass:[UIImageView class]] && view.tag 0) { CGRect frame = view.frame; frame.origin = CGPointMake(curXLoc, 0); view.frame = frame; curXLoc += (kScrollObjWidth); } } // set the content size so it can be scrollable [scrollView1 setContentSize:CGSizeMake((self.comicPageCount * kScrollObjWidth), [scrollView1 bounds].size.height)]; } Any help would be appreciated on this. Nick

    Read the article

  • How we should load the MFMailViewController in cocos2d ?

    - by srikanth rongali
    I am writing an app in using cocos2d. This method I have written for the selector goToFirstScreen: . The view is in landscape mode. I need to send an email. So, I need to launch the MFMailComposeViewController. I need it in portrait mode. But, the control is not entering in to viewDidLoad of the mailMe class. The problem is in goToScreen: method. But, I do not get where I am wrong ? -(void)goToFirstScreen:(id)sender { NSLog(@"goToFirstScreen: "); CCScene *Scene = [CCScene node]; CCLayer *Layer = [mailME node]; [Scene addChild:Layer]; [[CCDirector sharedDirector] setAnimationInterval:1.0/60]; [[CCDirector sharedDirector] pushScene: Scene]; } This is my mailMe class to launch mail controller #import <UIKit/UIKit.h> #import <MessageUI/MessageUI.h> #import <MessageUI/MFMailComposeViewController.h> #import "cocos2d.h" @interface mailME : CCLayer <MFMailComposeViewControllerDelegate> { UIViewController *mailComposer; } -(void)displayComposerSheet; -(void)launchMailAppOnDevice; @end #import "mailME.h" @implementation mailME -(void)viewDidLoad { NSLog(@"Enetrd in to mail"); Class mailClass = (NSClassFromString(@"MFMailComposeViewController")); if (mailClass != nil) { if ([mailClass canSendMail]) { [self displayComposerSheet]; } else { [self launchMailAppOnDevice]; } } else { [self launchMailAppOnDevice]; } } -(void)displayComposerSheet { CCDirector *director = [CCDirector sharedDirector]; [director pause]; [director stopAnimation]; [director.openGLView setUserInteractionEnabled:NO]; mailComposer = [[UIViewController alloc] init]; [mailComposer setView:[[CCDirector sharedDirector]openGLView]]; [mailComposer setModalTransitionStyle:UIModalTransitionStyleCoverVertical]; MFMailComposeViewController *picker = [[MFMailComposeViewController alloc] init]; picker.mailComposeDelegate = self; [picker setSubject:@"Hello!"]; NSArray *toRecipients = [NSArray arrayWithObject:@"[email protected]"]; [picker setToRecipients:toRecipients]; NSString *emailBody = @"It is not working!"; [picker setMessageBody:emailBody isHTML:YES]; [mailComposer presentModalViewController:picker animated:NO]; [picker release]; } - (void)mailComposeController:(MFMailComposeViewController*)controller didFinishWithResult:(MFMailComposeResult)result error:(NSError*)error { switch (result) { case MFMailComposeResultCancelled: break; case MFMailComposeResultSaved: break; case MFMailComposeResultSent: break; case MFMailComposeResultFailed: break; default: break; } [mailComposer dismissModalViewControllerAnimated:NO]; [[UIApplication sharedApplication] setStatusBarOrientation:CCDeviceOrientationLandscapeLeft animated:NO]; CCDirector *director = [CCDirector sharedDirector]; [director.openGLView setUserInteractionEnabled:YES]; [director startAnimation]; [director resume]; [mailComposer.view.superview removeFromSuperview]; } -(void)launchMailAppOnDevice { NSString *recipients = @"mailto:[email protected]?&subject=Hello!"; NSString *body = @"&body=It is not working"; NSString *email = [NSString stringWithFormat:@"%@%@", recipients, body]; email = [email stringByAddingPercentEscapesUsingEncoding:NSUTF8StringEncoding]; [[UIApplication sharedApplication] openURL:[NSURL URLWithString:email]]; } - (void)dealloc { [super dealloc]; } @end

    Read the article

  • Error while rendering report(.rdl).

    - by Sushavon Banerjee
    Hi, I have generated a .rdl report file. Now, when I am going to render the .rdl report file into pdf format,exception is throwing. The exception is : - "An error occurred during local report processing." The stack trace is follows : - " at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)\r\n at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)\r\n at Microsoft.Reporting.WebForms.LocalReport.Render(String format, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)\r\n at SaltlakeSoft.APEX2.Controllers.TestPageController.RenderReport() in E:\Documents and Settings\Administrator\Desktop\afetbuild15thmayapex2\apex2\Controllers\TestPageController.cs:line 1626\r\n at lambda_method(ExecutionScope , ControllerBase , Object[] )\r\n at System.Web.Mvc.ActionMethodDispatcher.<c_DisplayClass1.b_0(ControllerBase controller, Object[] parameters)\r\n at System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase controller, Object[] parameters)\r\n at System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary2 parameters)\r\n at System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary2 parameters)\r\n at System.Web.Mvc.ControllerActionInvoker.<c_DisplayClassa.b_7()\r\n at System.Web.Mvc.ControllerActionInvoker.InvokeActionMethodFilter(IActionFilter filter, ActionExecutingContext preContext, Func`1 continuation)" My code is as follows : - LocalReport report = new LocalReport(); report.ReportPath = @"E:\Report1.rdl"; List<Employee> employeeCollection = empRepository.FindAll().ToList(); ReportDataSource reportDataSource = new ReportDataSource("dataSource1",employeeCollection); report.DataSources.Clear(); report.DataSources.Add(reportDataSource); report.Refresh(); string reportType = "PDF"; string mimeType; string encoding; string fileNameExtension; string deviceInfo ="<DeviceInfo>" +"<OutputFormat>PDF</OutputFormat>" + "<PageWidth>8.5in</PageWidth>" + "<PageHeight>11in</PageHeight>" + "<MarginTop>0.5in</MarginTop>" +"<MarginLeft>1in</MarginLeft>" + "<MarginRight>1in</MarginRight>" +"<MarginBottom>0.5in</MarginBottom>" + "</DeviceInfo>"; Warning[] warnings; string[] streams; byte[] renderedBytes; renderedBytes = report.Render(reportType,deviceInfo,out mimeType,out encoding, out fileNameExtension, out streams, out warnings); Response.Clear(); Response.ContentType = mimeType; Response.AddHeader("content-disposition", "attachment; filename=foo." + fileNameExtension); Response.BinaryWrite(renderedBytes); Response.End(); Help me please... Thanks, Sushavon

    Read the article

  • wpf display staggered content

    - by Chris Cap
    I am trying to display a rather dynamic list of data in WPF. I have essentially a LineItem class that contains a list of strings and a line type. The line type separates different categories of line items. All line items with the same type should be displayed the same and their data should line up. For example, this list will contain an order summary. And the there will be a line type that represents something with a width and height. The width and height must line up vertically. However, there may be other line types that don't have to line up vertically. I want to produce a table similar to what you see below: ------------------------------------------------------------------ | some content here | some more content here | last content here | |----------------------------------------------------------------| | some content here | | last content here | |----------------------------------------------------------------| | spanning content that is longer then most | last content here | |----------------------------------------------------------------| | some content that can span a really long distance | ------------------------------------------------------------------ I attempted to do this by creating ListView with a single column that had a datatemplate that contained a grid with a fixed number of fields and then bind to the Colspan value. Unfortunately, this didn't work. I ended up with incorrect or overlapping content anytime I tried to do a column span. Here's the XAML I was working with <ListView ItemsSource="{Binding}" > <ListView.View> <GridView> <GridViewColumn Header="Content"> <GridViewColumn.CellTemplate> <DataTemplate> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition /> <ColumnDefinition /> <ColumnDefinition /> </Grid.ColumnDefinitions> <TextBlock Grid.Column="0" Grid.ColumnSpan="{Binding Path=Tokens[0].ColumnSpan}" Text="{Binding Path=Tokens[0].Content}" ></TextBlock> <TextBlock Grid.Column="1" Grid.ColumnSpan="{Binding Path=Tokens[1].ColumnSpan}" Text="{Binding Path=Tokens[1].Content}" ></TextBlock> <TextBlock Grid.Column="2" Text="{Binding Path=Tokens[2].Content}"></TextBlock> </Grid> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> </GridView> </ListView.View> And here's the classes I was binding to public class DisplayLine { public LineType Linetype { get; set; } public List<Token> Tokens { get; set; } public DisplayLine() { Tokens = new List<Token>(); } } public class Token { public string Content { get; set; } public bool IsEmpty { get { return string.IsNullOrEmpty(Content); } } public int ColumnSpan { get; set; } public Token() { ColumnSpan = 1; } } Does anyone have any suggestions of maybe a way of making this work. I may be taking the wrong approach. I'm trying to avoid any solutions where I explcitily build something in the code behind as I'm using the MVVM pattern so it has to be something that I can bind from exposed through the controller. My intial plan was to create a factory and separate classes that display the data differently based on type. However, I'm struggling coming up with a strategy for this using MVVM as I really can't just build something and display it. I have toyed with the idea of making some kind of UI service class that is injected, but it would still require some pretty detailed UI information from the controller to do it's work.

    Read the article

  • How to configure the roles in my tomcat application to work with JNDI(WIN AUTH)

    - by Itay Levin
    Hi, I'm trying to change the authentication mode of my application from JDBC-REALM to JNDI-REALM. I configured the following section inside the Server.xml <Realm className="org.apache.catalina.realm.JNDIRealm" debug="99" connectionURL="ldap://****:389/DC=onsetinc,DC=com??sAMccountName?sub?(objectClass=*)" connectionName="[email protected]" connectionPassword="password" userBase="CN=Users" referrals="follow" userSearch="(sAMAccountName={0})" userSubtree="true" roleBase="CN=Users" roleName="name" roleSubtree="true" roleSearch="(member={1})"/> I have also configured the web.xml under my appfolder to contain the following: <security-role> <role-name>Admin</role-name> </security-role> <security-role> <role-name>WaterlooUsers</role-name> </security-role> <security-constraint> <web-resource-collection> <web-resource-name>Tube</web-resource-name> <url-pattern>/ComposeMessage.jsp</url-pattern> <url-pattern>/PageStatus.jsp</url-pattern> <url-pattern>/UserStatus.jsp</url-pattern> <url-pattern>/SearchEC.jsp</url-pattern> <url-pattern>/SearchEC2.jsp</url-pattern> <url-pattern>/SearchMessageStatisticsEC.jsp</url-pattern> <url-pattern>/SearchMessageStatus.jsp</url-pattern> <url-pattern>/SearchMessageStatisticsPager.jsp</url-pattern> <url-pattern>/SearchPageStatus.jsp</url-pattern> </web-resource-collection> <auth-constraint> <role-name>WaterlooUsers</role-name> </auth-constraint> </security-constraint> In my Active directory i have created a new group called WaterlooUsers It's distinguish name is : distinguishedName: CN=WaterlooUsers,CN=Users,DC=onsetinc,DC=com It has a property member which contains the following user: member: CN=Itay Levin,CN=Users,DC=onsetinc,DC=com (which is my user) My record on the active directory looks like that: sAMAccountName: itayL distinguishedName: CN=Itay Levin,CN=Users,DC=onsetinc,DC=com memberOf: CN=WaterlooUsers,CN=Users,DC=onsetinc,DC=com and when i get the popup for user/password i enter the username "ItayL" in the authentication message box (and my password) I have 2 questions: How do i configure correctly the roles parameters correctly in the Realm section in the server.xml to enable me to both authenticate and authorize both this group of users WaterlooUsers and also assign them to the appropriate role so that they can see all the relevant pages in my website. - currently it seems that all the Users in my domain are authenticated to the site but get the http-403 Error and can't access any of the pages in the site. I also want to be able to create 2 different set of roles in my site - which can both have access to the same pages - but will see different things on the page. (for instance adding some administrative ability to the admin) Hope it was clear enough and not too long. Thanks in advance, Itay

    Read the article

  • Rails routing to XML/JSON without views gone mad

    - by John Schulze
    I have a mystifying problem. In a very simple Ruby app i have three classes: Drivers, Jobs and Vehicles. All three classes only consist of Id and Name. All three classes have the same #index and #show methods and only render in JSON or XML (this is in fact true for all their CRUD methods, they are identical in everything but name). There are no views. For example: def index @drivers= Driver.all respond_to do |format| format.js { render :json => @drivers} format.xml { render :xml => @drivers} end end def show @driver = Driver.find(params[:id]) respond_to do |format| format.js { render :json => @driver} format.xml { render :xml => @driver} end end The models are similarly minimalistic and only contain: class Driver< ActiveRecord::Base validates_presence_of :name end In routes.rb I have: map.resources :drivers map.resources :jobs map.resources :vehicles map.connect ':controller/:action/:id' map.connect ':controller/:action/:id.:format' I can perform POST/create, GET/index and PUT/update on all three classes and GET/read used to work as well until I installed the "has many polymorphs" ActiveRecord plugin and added to environment.rb: require File.join(File.dirname(__FILE__), 'boot') require 'has_many_polymorphs' require 'active_support' Now for two of the three classes I cannot do a read any more. If i go to localhost:3000/drivers they all list nicely in XML but if i go to localhost:3000/drivers/3 I get an error: Processing DriversController#show (for 127.0.0.1 at 2009-06-11 20:34:03) [GET] Parameters: {"id"=>"3"} [4;36;1mDriver Load (0.0ms)[0m [0;1mSELECT * FROM "drivers" WHERE ("drivers"."id" = 3) [0m ActionView::MissingTemplate (Missing template drivers/show.erb in view path app/views): app/controllers/drivers_controller.rb:14:in `show' ...etc This is followed a by another unexpected error: Processing ApplicationController#show (for 127.0.0.1 at 2009-06-11 21:35:52)[GET] Parameters: {"id"=>"3"} NameError (uninitialized constant ApplicationController::AreaAccessDenied): ...etc What is going on here? Why does the same code work for one class but not the other two? Why is it trying to do a #view on the ApplicationController? I found that if I create a simple HTML view for each of the three classes these work fine. To each class I add: format.html # show.html.erb With this in place, going to localhost:3000/drivers/3 renders out the item in HTML and I get no errors in the log. But if attach .xml to the URL it again fails for two of the classes (with the same error message as before) while one will output XML as expected. Even stranger, on the two failing classes, when adding .js to the URL (to trigger JSON rendering) I get the HTML output instead! Is it possible this has something to do with the "has many polymorphs" plugin? I have heard of people having routing issues after installing it. Removing "has many polymorphs" and "active support" from environment.rb (and rebooting the sever) seems to make no difference whatsoever. Yet my problems started after it was installed. I've spent a number of hours on this problem now and am starting to get a little desperate, Google turns up virtually no information which makes me suspect I must have missed something elementary. Any enlightenment or hint gratefully received! JS

    Read the article

  • MVC keeping the PartialView in its own context - ignore the main view holding the partial view

    - by Mike
    I'm looking at the partialview components of the MVC Framework. i want my partial view to be handled in its own action and for the rest of the view to handle itself, but i'm getting an exception because the main page is not getting its view fired. Am i going around this the wrong way? My Main View (Jobs/Index.aspx): <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<MvcApplication3.Models.JobViewModel>" %> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <% Html.RenderPartial("JobListing", Model.Jobs); %> </asp:Content> The partialview (Jobs/JobListing.ascx): <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<List<MvcApplication3.Models.Job>>" %> <table> <tr> <td> Job Title </td> <td> Job Location</td> </tr> <% foreach (var job in Model) { %> <tr> <td> <%= job.Title %> </td> <td> <%= job.Location %> </td> </tr> <% } %> <% Html.BeginForm("DoSomeStuff", "Job", null, FormMethod.Post); %> <%= Html.TextBox("SomeInfo") %> <button type="submit" id="submit" /> <% Html.EndForm(); %> The main controller for both the main view (Index) and the partialview (DoSomeStuff()) public class JobController : Controller { public ActionResult Index() { JobProvider provider = new JobProvider(Session); JobViewModel vm = new JobViewModel(); vm.Jobs = provider.GetJobs(); return View(vm); } public PartialViewResult DoSomeStuff() { return PartialView("JobListing"); } } As you can see in the partial view, it has its own form that posts to the Action called DoSomeStuff(). i want this action to handle any data submitted from that form. but when the form is submitted the main action (Index) does not fire and then i get an exception as the Model (.Models.JobViewModel) is not passed to the view that the partialview (JobListings) lives in. basically what im saying is, if i have a myview.aspx with lots of html.RenderPartialView('apartialview') that have forms in them, can i get it so these forms post to their own actions and the main view (with what ever model it inherits) is handled as well. Rather then having all the form submitting code in the main action for the view. am i do this wrong?

    Read the article

  • ASP.NET how to implement IServiceLayer

    - by rockinthesixstring
    I'm trying to follow the tutorial found here to implement a service layer in my MVC application. What I can't figure out is how to wire it all up. here's what I have so far. IUserRepository.vb Namespace Data Public Interface IUserRepository Sub AddUser(ByVal openid As String) Sub UpdateUser(ByVal id As Integer, ByVal about As String, ByVal birthdate As DateTime, ByVal openid As String, ByVal regionid As Integer, ByVal username As String, ByVal website As String) Sub UpdateUserReputation(ByVal id As Integer, ByVal AmountOfReputation As Integer) Sub DeleteUser(ByVal id As Integer) Function GetAllUsers() As IList(Of User) Function GetUserByID(ByVal id As Integer) As User Function GetUserByOpenID(ByVal openid As String) As User End Interface End Namespace UserRepository.vb Namespace Data Public Class UserRepository : Implements IUserRepository Private dc As DataDataContext Public Sub New() dc = New DataDataContext End Sub #Region "IUserRepository Members" Public Sub AddUser(ByVal openid As String) Implements IUserRepository.AddUser Dim user = New User user.LastSeen = DateTime.Now user.MemberSince = DateTime.Now user.OpenID = openid user.Reputation = 0 user.UserName = String.Empty dc.Users.InsertOnSubmit(user) dc.SubmitChanges() End Sub Public Sub UpdateUser(ByVal id As Integer, ByVal about As String, ByVal birthdate As Date, ByVal openid As String, ByVal regionid As Integer, ByVal username As String, ByVal website As String) Implements IUserRepository.UpdateUser Dim user = (From u In dc.Users Where u.ID = id Select u).Single user.About = about user.BirthDate = birthdate user.LastSeen = DateTime.Now user.OpenID = openid user.RegionID = regionid user.UserName = username user.WebSite = website dc.SubmitChanges() End Sub Public Sub UpdateUserReputation(ByVal id As Integer, ByVal AmountOfReputation As Integer) Implements IUserRepository.UpdateUserReputation Dim user = (From u In dc.Users Where u.ID = id Select u).FirstOrDefault ''# Simply take the current reputation from the select statement ''# and add the proper "AmountOfReputation" user.Reputation = user.Reputation + AmountOfReputation dc.SubmitChanges() End Sub Public Sub DeleteUser(ByVal id As Integer) Implements IUserRepository.DeleteUser Dim user = (From u In dc.Users Where u.ID = id Select u).FirstOrDefault dc.Users.DeleteOnSubmit(user) dc.SubmitChanges() End Sub Public Function GetAllUsers() As System.Collections.Generic.IList(Of User) Implements IUserRepository.GetAllUsers Dim users = From u In dc.Users Select u Return users.ToList End Function Public Function GetUserByID(ByVal id As Integer) As User Implements IUserRepository.GetUserByID Dim user = (From u In dc.Users Where u.ID = id Select u).FirstOrDefault Return user End Function Public Function GetUserByOpenID(ByVal openid As String) As User Implements IUserRepository.GetUserByOpenID Dim user = (From u In dc.Users Where u.OpenID = openid Select u).FirstOrDefault Return user End Function #End Region End Class End Namespace IUserService.vb Namespace Data Interface IUserService End Interface End Namespace UserService.vb Namespace Data Public Class UserService : Implements IUserService Private _ValidationDictionary As IValidationDictionary Private _repository As IUserRepository Public Sub New(ByVal validationDictionary As IValidationDictionary, ByVal repository As IUserRepository) _ValidationDictionary = validationDictionary _repository = repository End Sub Protected Function ValidateUser(ByVal UserToValidate As User) As Boolean Dim isValid As Boolean = True If UserToValidate.OpenID.Trim().Length = 0 Then _ValidationDictionary.AddError("OpenID", "OpenID is Required") isValid = False End If If UserToValidate.MemberSince = Nothing Then _ValidationDictionary.AddError("MemberSince", "MemberSince is Required") isValid = False End If If UserToValidate.LastSeen = Nothing Then _ValidationDictionary.AddError("LastSeen", "LastSeen is Required") isValid = False End If If UserToValidate.Reputation = Nothing Then _ValidationDictionary.AddError("Reputation", "Reputation is Required") isValid = False End If Return isValid End Function End Class End Namespace I have also wired up the IValidationDictionary.vb and the ModelStateWrapper.vb as described in the article above. What I'm having a problem with is actually implementing it in my controller. My controller looks something like this. Public Class UsersController : Inherits BaseController Private UserService As Data.IUserService Public Sub New() UserService = New Data.UserService(New Data.ModelStateWrapper(Me.ModelState), New Data.UserRepository) End Sub Public Sub New(ByVal service As Data.IUserService) UserService = service End Sub .... End Class however on the line that says Public Sub New(ByVal service As Data.IUserService) I'm getting an error 'service' cannot expose type 'Data.IUserService' outside the project through class 'UsersController' So my question is TWO PARTS How can I properly implement a Service Layer in my application using the concepts from that article? Should there be any content within my IUserService.vb?

    Read the article

  • Does this inheritance design belong in the database?

    - by Berryl
    === CLARIFICATION ==== The 'answers' older than March are not answers to the question in this post! Hello In my domain I need to track allocations of time spent on Activities by resources. There are two general types of Activities of interest - ones base on a Project and ones based on an Account. The notion of Project and Account have other features totally unrelated to both each other and capturing allocations of time, and each is modeled as a table in the database. For a given Allocation of time however, it makes sense to not care whether the allocation was made to either a Project or an Account, so an ActivityBase class abstracts away the difference. An ActivityBase is either a ProjectActivity or an AccountingActivity (object model is below). Back to the database though, there is no direct value in having tables for ProjectActivity and AccountingActivity. BUT the Allocation table needs to store something in the column for it's ActivityBase. Should that something be the Id of the Project / Account or a reference to tables for ProjectActivity / Accounting? How would the mapping look? === Current Db Mapping (Fluent) ==== Below is how the mapping currently looks: public class ActivityBaseMap : IAutoMappingOverride<ActivityBase> { public void Override(AutoMapping<ActivityBase> mapping) { //mapping.IgnoreProperty(x => x.BusinessId); //mapping.IgnoreProperty(x => x.Description); //mapping.IgnoreProperty(x => x.TotalTime); mapping.IgnoreProperty(x => x.UniqueId); } } public class AccountingActivityMap : SubclassMap<AccountingActivity> { public void Override(AutoMapping<AccountingActivity> mapping) { mapping.References(x => x.Account); } } public class ProjectActivityMap : SubclassMap<ProjectActivity> { public void Override(AutoMapping<ProjectActivity> mapping) { mapping.References(x => x.Project); } } There are two odd smells here. Firstly, the inheritance chain adds nothing in the way of properties - it simply adapts Projects and Accounts into a common interface so that either can be used in an Allocation. Secondly, the properties in the ActivityBase interface are redundant to keep in the db, since that information is available in Projects and Accounts. Cheers, Berryl ==== Domain ===== public class Allocation : Entity { ... public virtual ActivityBase Activity { get; private set; } ... } public abstract class ActivityBase : Entity { public virtual string BusinessId { get; protected set; } public virtual string Description { get; protected set; } public virtual ICollection<Allocation> Allocations { get { return _allocations.Values; } } public virtual TimeQuantity TotalTime { get { return TimeQuantity.Hours(Allocations.Sum(x => x.TimeSpent.Amount)); } } } public class ProjectActivity : ActivityBase { public virtual Project Project { get; private set; } public ProjectActivity(Project project) { BusinessId = project.Code.ToString(); Description = project.Description; Project = project; } }

    Read the article

  • jquery with ASP.NET MVC - calling ajax enabled web service

    - by dcp
    This is a bit of a continuation of a previous question. Now I'm trying to make a call to an AJAX enabled web service which I have defined within the ASP.NET MVC application (i.e. the MovieService.svc). But the service is never being called in my getMovies javascript function. This same technique of calling the AJAX web service works ok if I try it in a non ASP.NET MVC application, so it makes me wonder if maybe the ASP MVC routes are interfering with things somehow when it tries to make the AJAX web service call. Do you have any idea why my web service isn't getting called? Code below. <script src="<%= ResolveClientUrl("~/scripts/jquery-1.4.2.min.js") %>" type="text/javascript"></script> <script src="<%= ResolveClientUrl("~/scripts/grid.locale-en.js") %>" type="text/javascript"></script> <script src="<%= ResolveClientUrl("~/scripts/jquery-ui-1.8.1.custom.min.js") %>" type="text/javascript"></script> <script src="<%= ResolveClientUrl("~/scripts/jquery.jqGrid.min.js") %>" type="text/javascript"></script> <script type="text/javascript"> var lastsel2; function successFunction(jsondata) { debugger var thegrid = jQuery("#editgrid"); for (var i = 0; i < jsondata.d.length; i++) { thegrid.addRowData(i + 1, jsondata.d[i]); } } function getMovies() { debugger // ***** the MovieService#GetMovies method never gets called $.ajax({ url: 'MovieService.svc/GetMovies', data: "{}", // For empty input data use "{}", dataType: "json", type: "GET", contentType: "application/json; charset=utf-8", success: successFunction }); } jQuery(document).ready(function() { jQuery("#editgrid").jqGrid({ datatype: getMovies, colNames: ['id', 'Movie Name', 'Directed By', 'Release Date', 'IMDB Rating', 'Plot', 'ImageURL'], colModel: [ { name: 'id', index: 'Id', width: 55, sortable: false, hidden: true, editable: false, editoptions: { readonly: true, size: 10} }, { name: 'Movie Name', index: 'Name', width: 250, editable: true, editoptions: { size: 10} }, { name: 'Directed By', index: 'Director', width: 250, align: 'right', editable: true, editoptions: { size: 10} }, { name: 'Release Date', index: 'ReleaseDate', width: 100, align: 'right', editable: true, editoptions: { size: 10} }, { name: 'IMDB Rating', index: 'IMDBUserRating', width: 100, align: 'right', editable: true, editoptions: { size: 10} }, { name: 'Plot', index: 'Plot', width: 150, hidden: false, editable: true, editoptions: { size: 30} }, { name: 'ImageURL', index: 'ImageURL', width: 55, hidden: true, editable: false, editoptions: { readonly: true, size: 10} } ], pager: jQuery('#pager'), rowNum: 5, rowList: [5, 10, 20], sortname: 'id', sortorder: "desc", height: '100%', width: '100%', viewrecords: true, imgpath: '/Content/jqGridCss/redmond/images', caption: 'Movies from 2008', editurl: '/Home/EditMovieData/', caption: 'Movie List' }); $("#bedata").click(function() { var gr = jQuery("#editgrid").jqGrid('getGridParam', 'selrow'); if (gr != null) jQuery("#editgrid").jqGrid('editGridRow', gr, { height: 280, reloadAfterSubmit: false }); else alert("Hey dork, please select a row"); }); }); </script> <h2> <%= Html.Encode(ViewData["Message"]) %></h2> <p> To learn more about ASP.NET MVC visit <a href="http://asp.net/mvc" title="ASP.NET MVC Website"> http://asp.net/mvc</a>. </p> <table id="editgrid"> </table> <div id="pager" style="text-align: center;"> </div> <input type="button" id="bedata" value="Edit Selected" /> Here's my RegisterRoutes code: public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.IgnoreRoute("*MovieService.svc*"); routes.MapRoute( "Default", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = "" } // Parameter defaults ); } Here's what my MovieService class looks like: namespace jQueryMVC { [ServiceContract(Namespace = "")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class MovieService { // Add [WebGet] attribute to use HTTP GET [OperationContract] [WebGet(ResponseFormat = WebMessageFormat.Json)] public IList<Movie> GetMovies() { return Persistence.GetMovies(); } } }

    Read the article

  • WCF service using duplex channel in different domains

    - by ds1
    I have a WCF service and a Windows client. They communicate via a Duplex WCF channel which when I run from within a single network domain runs fine, but when I put the server on a separate network domain I get the following message in the WCF server trace... The message with to 'net.tcp://abc:8731/ActiveAreaService/mex/mex' cannot be processed at the receiver, due to an AddressFilter mismatch at the EndpointDispatcher. Check that the sender and receiver's EndpointAddresses agree. So, it looks like the communication just work in one direction (from client to server) if the components are in two separate domains. The Network domains are fully trusted, so I'm a little confused as to what else could cause this? Server app.config <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <behaviors> <serviceBehaviors> <behavior name="JobController.ActiveAreaBehavior"> <serviceMetadata httpGetEnabled="false" /> <serviceDebug includeExceptionDetailInFaults="true" /> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="JobController.ActiveAreaBehavior" name="JobController.ActiveAreaServer"> <endpoint address="mex" binding="mexTcpBinding" bindingConfiguration="" contract="IMetadataExchange" /> <host> <baseAddresses> <add baseAddress="net.tcp://SERVER:8731/ActiveAreaService/" /> </baseAddresses> </host> </service> </services> </system.serviceModel> </configuration> but I also add an end point programmatically in Visual C++ host = gcnew ServiceHost(ActiveAreaServer::typeid); NetTcpBinding^ binding = gcnew NetTcpBinding(); binding->MaxBufferSize = Int32::MaxValue; binding->MaxReceivedMessageSize = Int32::MaxValue; binding->ReceiveTimeout = TimeSpan::MaxValue; binding->Security->Mode = SecurityMode::Transport; binding->Security->Transport->ClientCredentialType = TcpClientCredentialType::Windows; ServiceEndpoint^ ep = host->AddServiceEndpoint(IActiveAreaServer::typeid, binding, String::Empty); // Use the base address Client app.config <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <bindings> <netTcpBinding> <binding name="NetTcpBinding_IActiveAreaServer" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" transactionFlow="false" transferMode="Buffered" transactionProtocol="OleTransactions" hostNameComparisonMode="StrongWildcard" listenBacklog="10" maxBufferPoolSize="524288" maxBufferSize="65536" maxConnections="10" maxReceivedMessageSize="65536"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Transport"> <transport clientCredentialType="Windows" protectionLevel="EncryptAndSign" /> <message clientCredentialType="Windows" /> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint address="net.tcp://SERVER:8731/ActiveAreaService/" binding="netTcpBinding" bindingConfiguration="NetTcpBinding_IActiveAreaServer" contract="ActiveArea.IActiveAreaServer" name="NetTcpBinding_IActiveAreaServer"> <identity> <userPrincipalName value="[email protected]" /> </identity> </endpoint> </client> </system.serviceModel> </configuration> Any help is appreciated! Cheers

    Read the article

  • Need .Net method to compute a Google Pagerank request checksum.

    - by Steve K
    The company I work for is currently developing a SEO tool which needs to include a domain or url Pagerank. It is possible to retrieve such data directly from Google by sending a request to the url called by the Google ToolBar. On of the parameters send to that url is a checksum of the domain whose pagerank is being requested. I have found multiple .Net methods for calculating that check sum; however, every one randomly returns corrupt values every so often. I can only handle errors to a certain point before my final data set becomes useless. I know that there are countless tools out there, from browser plugins to desktop applications, that can process page rank, so it can't be impossible. My question, then, is two fold: 1) Any anyone heard of the problem I am having? (specifically in .Net) If so, how can it (or has it) be resolved? 2) Is there a better source for retrieving Pagerank data? Below is the Url and checksum code I have been using. "http://toolbarqueries.google.com/search?client=navclient-auto&ie=UTF-8&oe=UTF-8&features=Rank:&q=info:" & strUrl & "ch=" & strCheckSum where: strUrl = the url being queried strCheckSum = CheckHash(GetHash(url)) (see code below) Any help would be greatly appreciated. ''' <summary> ''' Returns a hash-string from the site's URL ''' </summary> ''' <param name="_SiteURL">full URL as indexed by Google</param> ''' <returns>HASH for site as a string</returns> Private Shared Function GetHash(ByVal _SiteURL As String) As String Try Dim _Check1 As Long = StrToNum(_SiteURL, 5381, 33) Dim _Check2 As Long = StrToNum(_SiteURL, 0, 65599) _Check1 >>= 2 _Check1 = ((_Check1 >> 4) And 67108800) Or (_Check1 And 63) _Check1 = ((_Check1 >> 4) And 4193280) Or (_Check1 And 1023) _Check1 = ((_Check1 >> 4) And 245760) Or (_Check1 And 16383) Dim T1 As Long = ((((_Check1 And 960) << 4) Or (_Check1 And 60)) << 2) Or (_Check2 And 3855) Dim T2 As Long = ((((_Check1 And 4294950912) << 4) Or (_Check1 And 15360)) << 10) Or (_Check2 And 252641280) Return Convert.ToString(T1 Or T2) Catch Return "0" End Try End Function ''' <summary> ''' Checks the HASH-string returned and adds check numbers as necessary ''' </summary> ''' <param name="_HashNum">generated HASH-string</param> ''' <returns>modified HASH-string</returns> Private Shared Function CheckHash(ByVal _HashNum As String) As String Try Dim _CheckByte As Long = 0 Dim _Flag As Long = 0 Dim _tempI As Long = Convert.ToInt64(_HashNum) If _tempI < 0 Then _tempI = _tempI * (-1) End If Dim _Hash As String = _tempI.ToString() Dim _Length As Integer = _Hash.Length For x As Integer = _Length - 1 To 0 Step -1 Dim _quick As Char = _Hash(x) Dim _Re As Long = Convert.ToInt64(_quick.ToString()) If 1 = (_Flag Mod 2) Then _Re += _Re _Re = CLng(((_Re \ 10) + (_Re Mod 10))) End If _CheckByte += _Re _Flag += 1 Next _CheckByte = _CheckByte Mod 10 If 0 <> _CheckByte Then _CheckByte = 10 - _CheckByte If 1 = (_Flag Mod 2) Then If 1 = (_CheckByte Mod 2) Then _CheckByte >>= 1 End If End If End If If _Hash.Length = 9 Then _CheckByte += 5 End If Return "7" + _CheckByte.ToString() + _Hash Catch Return "0" End Try End Function ''' <summary> ''' Converts the string (site URL) into numbers for the HASH ''' </summary> ''' <param name="_str">Site URL as passed by GetHash()</param> ''' <param name="_Chk">Necessary passed value</param> ''' <param name="_Magic">Necessary passed value</param> ''' <returns>Long Integer manipulation of string passed</returns> Private Shared Function StrToNum(ByVal _str As String, ByVal _Chk As Long, ByVal _Magic As Long) As Long Try Dim _Int64Unit As Long = Convert.ToInt64(Math.Pow(2, 32)) Dim _StrLen As Integer = _str.Length For x As Integer = 0 To _StrLen - 1 _Chk *= _Magic If _Chk >= _Int64Unit Then _Chk = (_Chk - (_Int64Unit * Convert.ToInt64(_Chk \ _Int64Unit))) _Chk = IIf((_Chk < -2147483648), (_Chk + _Int64Unit), _Chk) End If _Chk += CLng(Asc(_str(x))) Next Catch End Try Return _Chk End Function

    Read the article

  • ASP.net MVC DropLownList db.SaveChanges not saving selection

    - by WMIF
    I have looked through a ton of tutorials and suggestions on how to work with DropDownList in MVC. I was able to get most of it working, but the selected item is not saving into the database. I am using MVC 3 and Razor for the view. My DropDownList is getting created with the correct values and good looking HTML. When I set a breakpoint, I can see the correct selected item ID in the model getting sent to controller. When the view goes back to the index, the DropDownList value is not set. The other values save just fine. Here are the related views. The DropDownList is displaying a list of ColorModel names as text with the ID as the value. public class ItemModel { [Key] public int ItemID { get; set; } public string Name { get; set; } public string Description { get; set; } public virtual ColorModel Color { get; set; } } public class ItemEditViewModel { public int ItemID { get; set; } public string Name { get; set; } public string Description { get; set; } public int ColorID { get; set; } public IEnumerable<SelectListItem> Colors { get; set; } } public class ColorModel { [Key] public int ColorID { get; set; } public string Name { get; set; } public virtual IList<ItemModel> Items { get; set; } } Here are the controller actions. public ActionResult Edit(int id) { ItemModel itemmodel = db.Items.Find(id); ItemEditViewModel itemEditModel; itemEditModel = new ItemEditViewModel(); itemEditModel.ItemID = itemmodel.ItemID; if (itemmodel.Color != null) { itemEditModel.ColorID = itemmodel.Color.ColorID; } itemEditModel.Description = itemmodel.Description; itemEditModel.Name = itemmodel.Name; itemEditModel.Colors = db.Colors .ToList() .Select(x => new SelectListItem { Text = x.Name, Value = x.ColorID.ToString() }); return View(itemEditModel); } [HttpPost] public ActionResult Edit(ItemEditViewModel itemEditModel) { if (ModelState.IsValid) { ItemModel itemmodel; itemmodel = new ItemModel(); itemmodel.ItemID = itemEditModel.ItemID; itemmodel.Color = db.Colors.Find(itemEditModel.ColorID); itemmodel.Description = itemEditModel.Description; itemmodel.Name = itemEditModel.Name; db.Entry(itemmodel).State = EntityState.Modified; db.SaveChanges(); return RedirectToAction("Index"); } return View(itemEditModel); } The view has this for the DropDownList, and the others are just EditorFor(). @Html.DropDownListFor(model => model.ColorID, Model.Colors, "Select a Color") When I set the breakpoint on the db.Color.Find(...) line, I show this in the Locals window for itemmodel.Color: {System.Data.Entity.DynamicProxies.ColorModel_0EB80C07207CA5D88E1A745B3B1293D3142FE2E644A1A5202B90E5D2DAF7C2BB} When I expand that line, I can see the ColorID that I chose from the dropdown box, but it does not save into the database.

    Read the article

  • View Body not showing in Spring 3.2

    - by Dennis Röttger
    I'm currently trying to get into Java Web Development in general in Spring more specifically. I've set up my project as follows - hello.jsp: <html> <head> <title>Spring 3.0 MVC Series: Hello World - ViralPatel.net</title> </head> <body> <p>ABC ${message}</p> </body> </html> HelloWorldController.java: package controllers; import org.springframework.stereotype.Controller; import org.springframework.web.bind.annotation.RequestMapping; import org.springframework.web.servlet.ModelAndView; @Controller public class HelloWorldController { @RequestMapping("/hello") public ModelAndView helloWorld() { String message = "Hello World, Spring 3.0!"; System.out.println(message); return new ModelAndView("hello", "message", message); } } web.xml: <?xml version="1.0" encoding="UTF-8"?> <web-app xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" version="2.5"> <display-name>Spring3MVC</display-name> <welcome-file-list> <welcome-file>index.jsp</welcome-file> </welcome-file-list> <servlet> <servlet-name>spring</servlet-name> <servlet-class> org.springframework.web.servlet.DispatcherServlet </servlet-class> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>spring</servlet-name> <url-pattern>*.html</url-pattern> </servlet-mapping> </web-app> spring-servlet.xml: <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:p="http://www.springframework.org/schema/p" xmlns:context="http://www.springframework.org/schema/context" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-3.0.xsd"> <context:component-scan base-package="controllers" /> <bean id="viewResolver" class="org.springframework.web.servlet.view.UrlBasedViewResolver"> <property name="viewClass" value="org.springframework.web.servlet.view.JstlView" /> <property name="prefix" value="/WEB-INF/jsp/" /> <property name="suffix" value=".jsp" /> </bean> </beans> I can start up the Server just fine and navigate to hello.html, which is resolved by the servlet to give me hello.jsp, the title of the .jsp shows (Spring 3.0 MVC Series: etc. etc.), alas, the body does not. Not the JSTL-Variable and not the "ABC" either. I've implemented jstl-1.2 in my lib-folder.

    Read the article

  • CoreData: managedObjectContext not being created

    - by PruitIgoe
    I had to add core data to an existing project but I am having issues with the managedObjectContext... in prefix.pch I have this: #import <Availability.h> #ifndef __IPHONE_5_0 #warning "This project uses features only available in iOS SDK 5.0 and later." #endif #ifdef __OBJC__ #import <UIKit/UIKit.h> #import <Foundation/Foundation.h> #import <CoreData/CoreData.h> #endif ... in my appDelegate.h I have this: #import <UIKit/UIKit.h> #import "AppViewController.h" #import "DDLog.h" #import "DDASLLogger.h" #import "DDFileLogger.h" #import "DDTTYLogger.h" #import "KIP_LogManager.h" @interface AppDelegate : UIResponder <UIApplicationDelegate> { DDFileLogger* fileLogger; /*coredata*/ NSManagedObjectModel* managedObjectModel; NSManagedObjectContext* managedObjectContext; NSPersistentStoreCoordinator* persistentStoreCoordinator; } @property (strong, nonatomic) UIWindow *window; @property (strong, nonatomic) AppViewController* viewController; @property (readonly, strong, nonatomic) NSManagedObjectContext* managedObjectContext; @property (readonly, strong, nonatomic) NSManagedObjectModel* managedObjectModel; @property (readonly, strong, nonatomic) NSPersistentStoreCoordinator* persistentStoreCoordinator; - (void)setupLogging; - (NSString *)applicationDocumentsDirectory; in appDelegate.m this: @synthesize managedObjectContext = _managedObjectContext; @synthesize managedObjectModel = _managedObjectModel; @synthesize persistentStoreCoordinator = _persistentStoreCoordinator; ... - (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions { //establish lumberjack logging [self setupLogging]; DDLogVerbose(@"\n\n*********************\nNEW LOG SESSION\n**********************\n\n"); //set root view controller self.window = [[UIWindow alloc] initWithFrame:[[UIScreen mainScreen] bounds]]; self.viewController = [[AppViewController alloc] init]; self.window.rootViewController = self.viewController; self.viewController.managedObjectContext = _managedObjectContext; return YES; } ... #pragma mark - CoreData Stack - (NSManagedObjectContext *)managedObjectContext { if (_managedObjectContext != nil) { return _managedObjectContext; } NSPersistentStoreCoordinator *coordinator = [self persistentStoreCoordinator]; if (coordinator != nil) { _managedObjectContext = [[NSManagedObjectContext alloc] init]; [_managedObjectContext setPersistentStoreCoordinator:coordinator]; } return _managedObjectContext; } // Returns the managed object model for the application. // If the model doesn't already exist, it is created from the application's model. - (NSManagedObjectModel *)managedObjectModel { if (_managedObjectModel != nil) { return _managedObjectModel; } NSURL *modelURL = [[NSBundle mainBundle] URLForResource:@"SPI_PAC" withExtension:@"momd"]; _managedObjectModel = [[NSManagedObjectModel alloc] initWithContentsOfURL:modelURL]; return _managedObjectModel; } - (NSPersistentStoreCoordinator *)persistentStoreCoordinator { if (persistentStoreCoordinator != nil) { return persistentStoreCoordinator; } NSMutableString* strDocsDirector = [[NSMutableString alloc] initWithString:[self applicationDocumentsDirectory]]; [strDocsDirector appendString:@"/SPI_PAC.sqlite"]; NSURL* storeURL = [NSURL URLWithString:strDocsDirector]; NSError *error = nil; persistentStoreCoordinator = [[NSPersistentStoreCoordinator alloc] initWithManagedObjectModel:[self managedObjectModel]]; if(![persistentStoreCoordinator addPersistentStoreWithType:NSSQLiteStoreType configuration:nil URL:storeURL options:nil error:&error]) { /*Error for store creation should be handled in here*/ } return persistentStoreCoordinator; } - (NSString *)applicationDocumentsDirectory { return [NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES) lastObject]; } in the view controller, viewDidLoad I am logging the passed managedObjectContext and am getting null returned. Obviously I am missing something but not sure what? In viewcontroller.h I have: @property (nonatomic, retain) NSManagedObjectModel* managedObjectModel; @property (nonatomic, retain) NSManagedObjectContext* managedObjectContext; @property (nonatomic, retain) NSPersistentStoreCoordinator* persistentStoreCoordinator; and in the viewcontroller.m: @synthesize managedObjectContext = managedObjectContext; ... DDLogVerbose(@"%@", managedObjectContext);

    Read the article

  • MVC Persist Collection ViewModel (Update, Delete, Insert)

    - by Riccardo Bassilichi
    In order to create a more elegant solution I'm curios to know your suggestion about a solution to persist a collection. I've a collection stored on DB. This collection go to a webpage in a viewmodel. When the go back from the webpage to the controller I need to persist the modified collection to the same DB. The simple solution is to delete the stored collection and recreate all rows. I need a more elegant solution to mix the collections and delete not present record, update similar records ad insert new rows. this is my Models and ViewModels. public class CustomerModel { public virtual string Id { get; set; } public virtual string Name { get; set; } public virtual IList<PreferredAirportModel> PreferedAirports { get; set; } } public class AirportModel { public virtual string Id { get; set; } public virtual string AirportName { get; set; } } public class PreferredAirportModel { public virtual AirportModel Airport { get; set; } public virtual int CheckInMinutes { get; set; } } // ViewModels public class CustomerViewModel { [Required] public virtual string Id { get; set; } public virtual string Name { get; set; } public virtual IList<PreferredAirporViewtModel> PreferedAirports { get; set; } } public class PreferredAirporViewtModel { [Required] public virtual string AirportId { get; set; } [Required] public virtual int CheckInMinutes { get; set; } } And this is the controller with not elegant solution. public class CustomerController { public ActionResult Save(string id, CustomerViewModel viewModel) { var session = SessionFactory.CurrentSession; var customer = session.Query<CustomerModel>().SingleOrDefault(el => el.Id == id); customer.Name = viewModel.Name; // How cai I Merge collections handling delete, update and inserts ? var modifiedPreferedAirports = new List<PreferredAirportModel>(); var modifiedPreferedAirportsVm = new List<PreferredAirporViewtModel>(); // Update every common Airport foreach (var airport in viewModel.PreferedAirports) { foreach (var custPa in customer.PreferedAirports) { if (custPa.Airport.Id == airport.AirportId) { modifiedPreferedAirports.Add(custPa); modifiedPreferedAirportsVm.Add(airport); custPa.CheckInMinutes = airport.CheckInMinutes; } } } // Remove common airports from ViewModel modifiedPreferedAirportsVm.ForEach(el => viewModel.PreferedAirports.Remove(el)); // Remove deleted airports from model var toDelete = customer.PreferedAirports.Except(modifiedPreferedAirports); toDelete.ForEach(el => customer.PreferedAirports.Remove(el)); // Add new Airports var toAdd = viewModel.PreferedAirports.Select(el => new PreferredAirportModel { Airport = session.Query<AirportModel>(). SingleOrDefault(a => a.Id == el.AirportId), CheckInMinutes = el.CheckInMinutes }); toAdd.ForEach(el => customer.PreferedAirports.Add(el)); session.Save(customer); return View(); } } My environment is ASP.NET MVC 4, nHibernate, Automapper, SQL Server. Thank You!!

    Read the article

  • "Could not establish secure channel for SSL/TLS" in .NET CF application on smart phone

    - by Stefan Mohr
    I have a stubborn communications issue with an application running on the .NET Compact Framework 3.5 on Windows Mobile smartphones. I am constructing a web request using this code: UTF8Encoding encoding = new System.Text.UTF8Encoding(); byte[] Data = encoding.GetBytes(HttpUtility.ConstructQueryString(parameters)); httpRequest = WebRequest.Create((domain)) as HttpWebRequest; httpRequest.Timeout = 10000000; httpRequest.ReadWriteTimeout = 10000000; httpRequest.Credentials = CredentialCache.DefaultCredentials; httpRequest.Method = "POST"; httpRequest.ContentType = "application/x-www-form-urlencoded"; httpRequest.ContentLength = Data.Length; Stream SendReq = httpRequest.GetRequestStream(); SendReq.Write(Data, 0, Data.Length); SendReq.Close(); HttpWebResponse httpResponse = (HttpWebResponse)httpRequest.GetResponse(); return httpResponse.GetResponseStream(); The web service functions by receiving a JSON-encoded document as part of the URL (eg. https://site.com/ws/sync??document={"version":"1.0.0","items":[{"item_1":"item1"}]}&user=usr&password=pw), and as a response receives another JSON document as response data. This code runs fine on all emulators and PDAs running WM 5 and 6. We have seen an issue with a couple of customers running Treo smartphones (and only on the Sprint network). We have tested the code on an identical device on the AT&T network (via DeviceAnywhere) and once again the code worked as we expected. This has to be some sort of security policy on the phone, but we've been unable to determine a workaround or diagnose it thoroughly as we cannot reproduce it in house and have had to resort to getting users to assist with running test drivers for us. When this code executes, the user's device throws the following exception: System.Net.WebException Could not establish secure channel for SSL/TLS Stack trace: at System.Net.HttpWebRequest.finishGetRequestStream() at System.Net.HttpWebRequest.GetRequestStream() at OurApp.GetResponseStream(String domain, Hashtable parameters) inner exception: System.IO.IOException Authentication failed because the remote party has closed the transport stream. Stack trace: at System.Net.SslConnectionState.ClientSideHandshake() at System.Net.SslConnectionState.PerformClientHandShake() at System.Net.Connection.connect(Object ignored) at System.Threading.ThreadPool.WorkItem.doWork(Object o) at System.Threading.Timer.ring() Examining the server Apache logs shows no hits from the user's IP - I don't think the device is even attempting to send a packet before failing. If relevant, the server is running Apache on Linux and is written using the TurboGears Python framework. The server certificate is issued by a CA and is still valid. The test driver where this error was copied from was not code signed, however the same error (without the error messages) is signed with a GeoTrust certificate so we don't believe this is a code signing issue. The application installs and launches without issue on all phones - it's just establishing this SSL connection that is breaking for these users. One significant issue in troubleshooting is that there is a substantial inconvenience each time we try out a solution (need to find a "volunteer" customer), so we're really looking for a silver bullet or a better understanding of the handshaking process so we can be reasonably confident we only need to ask the user to test it one or two more times. One final mention: we have tried the sync both over ActiveSync and also over GPRS with identical results. Any thoughts would be greatly appreciated!

    Read the article

  • Advice on Factory Method

    - by heath
    Using php 5.2, I'm trying to use a factory to return a service to the controller. My request uri would be of the format www.mydomain.com/service/method/param1/param2/etc. My controller would then call a service factory using the token sent in the uri. From what I've seen, there are two main routes I could go with my factory. Single method: class ServiceFactory { public static function getInstance($token) { switch($token) { case 'location': return new StaticPageTemplateService('location'); break; case 'product': return new DynamicPageTemplateService('product'); break; case 'user' return new UserService(); break; default: return new StaticPageTemplateService($token); } } } or multiple methods: class ServiceFactory { public static function getLocationService() { return new StaticPageTemplateService('location'); } public static function getProductService() { return new DynamicPageTemplateService('product'); } public static function getUserService() { return new UserService(); } public static function getDefaultService($token) { return new StaticPageTemplateService($token); } } So, given this, I will have a handful of generic services in which I will pass that token (for example, StaticPageTemplateService and DynamicPageTemplateService) that will probably implement another factory method just like this to grab templates, domain objects, etc. And some that will be specific services (for example, UserService) which will be 1:1 to that token and not reused. So, this seems to be an ok approach (please give suggestions if it is not) for a small amount of services. But what about when, over time and my site grows, I end up with 100s of possibilities. This no longer seems like a good approach. Am I just way off to begin with or is there another design pattern that would be a better fit? Thanks. UPDATE: @JSprang - the token is actually sent in the uri like mydomain.com/location would want a service specific to loction and mydomain.com/news would want a service specific to news. Now, for a lot of these, the service will be generic. For instance, a lot of pages will call a StaticTemplatePageService in which the token is passed in to the service. That service in turn will grab the "location" template or "links" template and just spit it back out. Some will need DynamicTemplatePageService in which the token gets passed in, like "news" and that service will grab a NewsDomainObject, determine how to present it and spit that back out. Others, like "user" will be specific to a UserService in which it will have methods like Login, Logout, etc. So basically, the token will be used to determine which service is needed AND if it is generic service, that token will be passed to that service. Maybe token isn't the correct terminology but I hope you get the purpose. I wanted to use the factory so I can easily swap out which Service I need in case my needs change. I just worry that after the site grows larger (both pages and functionality) that the factory will become rather bloated. But I'm starting to feel like I just can't get away from storing the mappings in an array (like Stephen's solution). That just doesn't feel OOP to me and I was hoping to find something more elegant.

    Read the article

< Previous Page | 626 627 628 629 630 631 632 633 634 635 636 637  | Next Page >