Search Results

Search found 19975 results on 799 pages for 'disk queue length'.

Page 632/799 | < Previous Page | 628 629 630 631 632 633 634 635 636 637 638 639  | Next Page >

• VMWare Workstation Linux Host performance tuning

  - by Hoghweed

  I need to improve my linux hosted vmware workstation for using multiple virtual machines at the same time. I feel very stupid I lost a great blog post link which I found last month (and I'm not able to find it again..) so I try to ask here if anyone can help me: This is my host (laptop): 16GB DDR3 Ram HDD Hybrid 750GB 7200 (8GB SSD Cache) Mint 15 x64 Kernel 3.9.7 swappiness set to 10 The above are the important things about the host. So, My need is the ability to run 2 or 3 VMs at the same time. The lack of performance is about the disk, The last time from that blog post I lost, I setup /tmp to be mounted ad a memory partition and in my previous installation that was good, now I'm not able to find a good solution to tweak the things. I think with 16GB o RAM there will be no problems to run multiple VMs, but whe they start to swap or use the /tmp things going bad (guest cursor going too fast after a freeze, guest freeze and so on) Anyone can help me to fit a good host tweak and configuration to get better performance? Thanks in advance

  Read the article

• Best way to convert episodic DVDs for Windows Media Center?

  - by Roger Lipscombe

  I'm archiving my DVD collection. My goal is to be able to play them back in Windows Media Center. For feature-length DVDs, I'm using AnyDVD and CloneDVD, which is working well. For playing back TV shows (and other episodic content), I'm using Media Browser, which doesn't support a VIDEO_TS folder per episode. It expects the shows to be broken up into one file per episode (e.g. "Willo the Wisp - S01E12.avi"). For this, I'm attempting to use Handbrake, which, for extracting the episodes from DVD (or already-ripped VIDEO_TS folder), is working pretty well. The problem that I have is that the default x264 encoder over-compresses the resulting video stream, which results in hideous artifacts in animated shows. The aforementioned Willo the Wisp is a particularly bad example, because the original DVD is particularly "noisy". If I switch to using the ffmpeg encoder, the artifacts are gone in Windows Media Player, but I can't get the resulting files to play back in Windows Media Center. I see the first frame, and then there's an error message. I've installed the CCCP codec collection, but it doesn't seem to have made any difference. So: what's the best way to convert VIDEO_TS to individual episode files for playback in Windows Media Center?

  Read the article

• Hourly SQL Server 2005 Slowness (Possibly caused by SYSTEM)

  - by Zorlack

  We're trying to diagnose the cause of slowness on our Database server. We're running the latest rev SQL Server 2005 on Windows 2008x64. The behavior that we're seeing is this: We see the SYSTEM process spike one of the CPUs for about 2 minutes, during this time SQL server slows down by a factor of 10. The slowness lasts until SYSTEM is done, then in an hour everything starts again. During these slowdowns disk writes don't spike, paging doesn't spike, the only noticeable precursor we see is that SYSTEM maxes out one of the sixteen (HT)CPUs. Note that this doesn't happen at the top of the hour, it just happens once an hour, and it shifts a bit depending on the length of the incident. At the moment this is causing intermittent slowdowns, but when the server is really busy it can cause Worker Thread starvation. The server is a Dual Quad Dell R710 with 96GB of RAM and RAID10 data/log disks. Has anyone experienced this kind of problem? Does anyone know where we should look?

  Read the article

• USB External HDD NOT spinning down on Windows Vista / Windows 7

  - by Deepak

  I have 3 external 2.5" USB HDDs - all from different manufacturers and with different capacities. I also have access to multiple Windows Vista / Windows 7 / Windows XP computers. My problem is that with the Windows Vista and Windows 7 computers, the external USB drives DO NOT spin down when I do "Safely remove hardware". Windows will tell me that I can safely remove the device, but I can see (and feel the rotations of the disk when I touch the casing) that the disks are still spinning and NEVER spin down. They also never go into their suspended state (which is generally signaled with a slow flashing of the activity LED). However, with Windows XP, when I do "Safely remove hardware", I can see that the drives do indeed spin down without any issues and go into their respective suspended states. I notice that this behaviour is consistent across all my 3 drives and on different hardware. Has anybody else noticed the same issues? Is there any way we can have the same behaviour as Windows XP on Windows Vista and 7, because I feel on the long run, disconnecting the drives while they are still spinning will have a negative effect on their life span. Thanks, Deepak.

  Read the article

• How to use Zune software to listen to podcasts with generic MP3 player?

  - by Bevan

  I listen to a bunch of podcasts - a great way to fill the otherwise mindless space of a daily commute. My MP3 player is a Transonic brand, appears on my computer as a generic storage device. I've been using iTunes to download the podcasts, and manually moving the files out of the disk folder onto my player, but this is pretty tedious. iTunes also fails to recognise that the files are gone and leaves them in the list. (Actually, iTunes for windows is pretty much a dog, but that's a different rant.) The Zune software is 99% of what I want in a podcast downloader - performs well, looks nice, downloads reliably and so on. Some features - like only downloading the next five unheard episodes of a podcast - are superb. However, if I manually move the files across to the MP3 player, the Zune software concludes that the file has never been downloaded, and downloads it again. This leads me to my question: What is a good way to use the Zune software to download podcasts for listening on a generic MP3 player? Are there any addons for the Zune software to make this easier? Registry hacks? Can I configure the Zune software to not download the same episode multiple times? Is there a way for the Zune software to populate my MP3 player directly, instead of having to copy files?

  Read the article

• Make isolinux 4.0.3 chainload itself

  - by chainloader

  I have a bootable iso which boots into isolinux 4.0.3 and I want to make it chainload itself (my actual goal is to chainload isolinux.bin v4.0.1-debian, which should start up the Ubuntu10.10 Live CD, but for now I just want to make it chainload itself). I can't get isolinux to chainload any isolinux.bin, no matter what version. It either freezes or shows a "checksum error" message. I'm using VMWare to test the iso. Things I have tried: .com32 /boot/isolinux/chain.c32 /boot/isolinux/isolinux-debug.bin (chainload self) this shows Loading the boot file... Booting... ISOLINUX 4.03 2010-10-22 Copyright (C) 1994-2010 H. Peter Anvin et al isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: Main image LBA = 53F00100 ...and the machine freezes. Then I've tried this (chainload GRUB4DOS 0.4.5b) chainloader /boot/isolinux/isolinux-debug.bin Result: Error 13: Invalid or unsupported executable format Next try: (chainload GRUB4DOS 0.4.5b) chainloader --force /boot/isolinux/isolinux-debug.bin boot Result: ISOLINUX 4.03 2010-10-22 Copyright (C) 1994-2010 H. Peter Anvin et al isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: No boot info table, assuming single session disk... isolinux: Spec packet missing LBA information, trying to wing it... isolinux: Main image LBA = 00000686 isolinux: Image checksum error, sorry... Boot failed: press a key to retry... I have tried other things, but all of them failed miserably. Any suggestions?

  Read the article

• How to uninstall files and software from a Solid State Drive (SSD)

  - by jasondavis

  I am using a SSD drive just as a main Operation system and software drive. I have a regular spinning disk for data files. I have read that files are not REALLY deleted from a SSD drive when you "delete" them. So here is my situation and hopefully I can get some good advice. Let's say I have Windows 7 Pro x64bit installed on my 80gb Intel SSD. I then have Adobe Photoshop CS4 installed along with 50 other programs installed onto this SSD. I then decide I am done with Adobe Phjotoshop CS4 and want to remove it. I then decide I want to install another version of Adobe Photoshop and a few other software titles. Would I just do the usual, add/remove software from the windows control panel. Or if the software being removed has an "Uninstall" program to run, then run it and uninstall the software? I realize that all this WILL remove the software from Windows 7 but I am wanting to know if there is additional steps that should be taken since it is a solid state drive (SSD)?

  Read the article

• File system concepts (df command)

  - by mkab

  I'm finding it difficult to understand some stuffs about the df command. Suppose I type df and I have the following output Filesystem 1k-blocks Used Avail Capacity Mounted on /dev/da0s1 some number some number number percentage /win /dev/da0s2 some number some number number percentage /win/home /dev/da0s3a some number some number number percentage / devfs some number some number number percentage /dev /dev/da0s3g some number some number number percentage /local /dev/da0s3h some number some number -number 102% /reste /dev/da0s3d some number some number number percentage /tmp /dev/da1s3f some number some number number percentage /usr /dev/da1s3e some number some number number percentage /var /dev/da1s1a some number some number number percentage /public Are the answers to the following questions correct? How many physical drives do I have? Ans: 2. da0s1 and da1s1 How many physical partitions on each disk? Ans: 8 for da0s1 and 1 for da1s1 How many BSD partition on each physical partition Ans: Impossible to determine. We have to use the -T to determine its type How is it possible for the file system /dev/da0s3h filled at 102%? And where is this overflowed data written?Ans: I have no idea for this one Thanks.

  Read the article

• Why do I get a DegradedArray event with mdadm

  - by azera

  Hello Just so we're clear on what's happening: I bought 4 new sata 2 drives, with the intent of using them in a raid5 all drive are fully recognised by both my bios and my linux box (gentoo) I created a raid5 array, fiddled a bit with it to understand how it works, how to monitor ect At some point, this triggered a degradedarray event, even though the array is brand new. I tried to stopping the array and recreating a new array with the same drive but the new array starts degraded too. here is what I used to create it mdadm --create -l5 -n4 /dev/md/md0-r5 /dev/sdb /dev/sdd /dev/sde /dev/sdf here are the output from my /proc/mdstat and mdadm --detail --scan **mdstat** Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md127 : active raid5 sdf[4] sde[2] sdd[1] sdb[0] 4395415488 blocks level 5, 64k chunk, algorithm 2 [4/3] [UUU_] [>....................] recovery = 2.8% (41689732/1465138496) finish=890.3min speed=26645K/sec unused devices: <none> **detail** ARRAY /dev/md/md0-r5 metadata=0.90 spares=1 UUID=453e2833:81f22a74:64188b84:66721085 As such I have a couple questions: does a raid5 array always start in degraded mode at first ? why does sdf have the number 4 between bracket instead of 3, why does it see a spare disk and why is the 4th drive marked with _ instead of U ? (bad configuration ?) How can I recreate the array from scratch, do i have to format each drive on its own before recreating it ? Thanks for any help, I'm not sure about what I should do at the moment

  Read the article

• I/O Error on LG GSA-H12N DVD drive on Windows 7

  - by Ashwin

  I am facing an I/O Error when I try to burn DVD data discs on my LG GSA-H12N DVD drive on Windows 7. Note that I was able to do this same operation on the same hardware/software just a day earlier without any problems, but with Windows XP. The only change (AFAIK) has been the installation of Windows 7 to replace Windows XP on this PC. Here is the error I get when I try to burn a DVD data disc using CDBurnerXP 4.2.7.1801: Burning error occured An error occured while burning the disc. Most likely the disc is not usable. Usually these errors happen if the inserted media is not compatible to the drive or of poor quality. (devNTSPTI_IO_Error) Could not write to Disc (LBA: 52864 Length: 32). SCSI Pass-through Interface I/O Error. - 0xFF045D Note that there can be no problem with the discs since I have been using the same discs (from the same box) just before the Windows 7 installation with no problems. The only change has been Windows 7. I tried InfraRecorder v0.5 and ImgBurn v2.5 and got similar I/O errors: Note that Windows 7 lists the LG GSA-H21N drive as being compatible (see this link). I also checked the LG Drivers website and using the firware update from there updated the drive firmware from version UL01 to UL02. But, even this has not helped. The drive reads DVDs without any problem, but continues to produce coasters. Could someone help me figure out what is the problem? Thanks :)

  Read the article

• How can I configure apache to cache the images that it is serving? Right now it is giving headers t

  - by Tchalvak

  Serving up images that don't seem to cache There's a LAPP (postgresql instead of mysql) running over on http://ninjawars.net. I just recently noticed that images don't seem to be caching with any kind of good frequency as I was reloading a page with a few images on it here: http://www.ninjawars.net/attack_player.php Here is an example image (they're probably all being served exactly the same): http://www.ninjawars.net/images/characters/fighter.png Checking the header, it seems that the caching is set to: Cache-Control:max-age=0 (the full header for this image-like-all-the-others is... Request URL:http://www.ninjawars.net/images/characters/fighter.png Request Method:GET Status Code:200 OK Request Headers Accept:application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,/;q=0.5 Cache-Control:max-age=0 Referer:http://www.ninjawars.net/images/characters/fighter.png User-Agent:Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.3 Safari/533.4 Response Headers Accept-Ranges:bytes Content-Length:938 Content-Type:image/png Date:Thu, 13 May 2010 21:24:07 GMT ETag:"ffd4d-3aa-4837efc120540" Last-Modified:Mon, 05 Apr 2010 15:28:45 GMT Server:Apache ) So what modules or config or htaccess or whatever do I change to have it cache images, e.g. for 24 hours?

  Read the article

• Analyze a BSOD (irql_less_than_or_equal)

  - by Bruno Reis

  Hello. About 2 months ago I bought a new system and built it at home: Mother board: XFX X58i Processor: Core i7 920, using the stock cooler Memory: 3x2GB Corsair DDR3 1600 Video card: NVIDIA GTS 250 (1GB) Hard disk: 2x WD 500GB, 7200rpm I have 2 screens plugged into the video card, and the system is connected to a 550W PSU. Nothing is overclocked. After building the system, I stressed it a lot with Prime95 and rthdribl to check its stability. All my tests were perfect. So I reinstalled Win 7 x64 Professional and started using it normally. The first week (2010-03-15) I got the infamous irql_less_than_or_equal BSOD. Ten days after (2010-03-24) I got another one. Then on 2010-04-09, 2010-05-04. Since 2 days ago it became worse: I got one bluescreen per day! (2010-05-12, 2010-05-13, 2010-05-14). I installed BlueScreenView to try to obtain some information, but I'm not able to extract any useful information apart from the bug check string (irql_less_than_or_equal), and that it was caused by ntoskrnl.exe (the first three at ntoskrnl.exe+71f00, the last 4 at ntoskrnl.exe+70600 -- which I suspect could be the same thing, as Microsoft could have patched this file in the mean time, so the address of the function causing it changed). Then I stressed my memory sticks with memtest, they worked perfectly. After booting, I've stressed my GPU with FurMark and RTHDRIBL, everything was fine. Then I stressed the CPU with 4 instances of Prime95 while monitoring the temperature -- that never exceeded 85oC with the case closed --, everything fine. Finally I've stressed the whole system with HeavyLoad for a looooong time, everything worked just fine. So, I have stressed most of the components of the system, but couldn't get any useful information from it. Do you have any hint on what else can I do to find the culprit? Thanks Bruno

  Read the article

• Best way to attach 96 tb to workstation

  - by user994179

  I'm running a workstation with dual xeon 5690's (12 physical/24 logical cores), 192 gb of ram (ie, maxed-out), Windows 7 64bit, 5 slots for adapter cards, and 1 tb of internal storage, with 5 more internal bays available. I have an app that creates data files totaling about 88 tbs. These are written once every 14 months, and the rest of the time the app only needs to read them; and 95% of the reads are sequential reads of huge chunks of data. I have some control over how big the individual files are, but ideally they would be between 5 and 8 tbs. The app will be reading from only one drive at a time, and the nature of the data is such that if (when) a drive dies I can restore the data to a new disk from tape. While it would be nice to be able to use the fastest drive/controllers available, at this point size matters more than speed. After doing lots of reading, I am leaning toward buying a bunch of cheap 2tb drives and putting them into a bunch of cheap enclosures. All this stuff is going into my home office, so I need to avoid the raised floor/refrigerated approach. My questions: Is the cheap drive/enclosure solution the best one for this situation? Given the nature of the app and the way the data is used, does RAID make sense? If so, which one? For huge sequential reads, would Usb 3.0 and eSata be a wash performance-wise? For each slot available on the workstation, can I hook up an enclosure that can hold multiple drives? Or is it one controller per drive? If I can have multiple drives on one controller, am I essentially splitting the bandwidth (throughput)? For example, if I have a 12 bay enclosure, is the throughput of the controller reduced by a factor of 12? Are there any Windows 7 volume/drive/capacity limits I should be aware of? Thanks

  Read the article

• Why does my DSDT table is different from what I found online?

  - by Hao Shen

  I have found a field in DSDT table where I want to modify from here http://www.ztex.de/misc/c2ctl.e.html Generally, I want to modify the _PSS field about the processor so that I can have more frequency levels available in the CPUfreq driver interface. I try to use this command to dissemble the DSDT table from my Desktop(Linux2.6.29,Intel CORE 2): cat /proc/acpi/dsdt > dsdt.aml iasl -d dsdt.aml Then I have a file dsdt.dsl as following(very long, so I just show the beginning of the file): /* * Intel ACPI Component Architecture * AML Disassembler version 20090123 * * Disassembly of dsdt.aml, Mon May 6 20:41:40 2013 * * * Original Table Header: * Signature "DSDT" * Length 0x00003794 (14228) * Revision 0x01 **** ACPI 1.0, no 64-bit math support * Checksum 0x46 * OEM ID "DELL" * OEM Table ID "dt_ex" * OEM Revision 0x00001000 (4096) * Compiler ID "INTL" * Compiler Version 0x20050624 (537200164) */ DefinitionBlock ("dsdt.aml", "DSDT", 1, "DELL", "dt_ex", 0x00001000) { Method (DBIN, 0, NotSerialized) { Noop } Scope (\) { Device (_SB.VBTN) ................... But I can not find the _PSS field as shown in the website I have given above. I do not know why? I am sure the current cpufreq driver shows 4 frequency levels available. So at least there should be something in the table showing this..right? Has anybody here played with the DSDT table before? Thanks,

  Read the article

• wget hangs in http request sent awaiting response in some sites

  - by gkr

  Using Ubuntu 12.04. wget hangs in http request sent, awaiting response... in some sites. Browser's are not opening sites that are failed in wget. But in WinXP everything works. This works gkr@gkr-desktop:~/Documents/curl$ wget google.com --2012-06-12 21:29:37-- http://google.com/ Resolving google.com (google.com)... 74.125.236.174, 74.125.236.160, 74.125.236.161, ... Connecting to google.com (google.com)|74.125.236.174|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: http://www.google.com/ [following] --2012-06-12 21:29:38-- http://www.google.com/ Resolving www.google.com (www.google.com)... 74.125.236.179, 74.125.236.180, 74.125.236.176, ... Connecting to www.google.com (www.google.com)|74.125.236.179|:80... connected. HTTP request sent, awaiting response... 302 Found Location: http://www.google.co.in/ [following] --2012-06-12 21:29:38-- http://www.google.co.in/ Resolving www.google.co.in (www.google.co.in)... 74.125.236.184, 74.125.236.191, 74.125.236.183, ... Connecting to www.google.co.in (www.google.co.in)|74.125.236.184|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `index.html.3' [ ] 13,383 --.-K/s in 0.04s 2012-06-12 21:29:39 (308 KB/s) - `index.html.3' saved [13383] gkr@gkr-desktop:~/Documents/curl$ This site just stops/hangs in awaiting response. gkr@gkr-desktop:~/Documents/curl$ wget grooveshark.com --2012-06-12 21:27:29-- http://grooveshark.com/ Resolving grooveshark.com (grooveshark.com)... 8.20.213.76 Connecting to grooveshark.com (grooveshark.com)|8.20.213.76|:80... connected. HTTP request sent, awaiting response... ^C gkr@gkr-desktop:~/Documents/curl$ Thanks

  Read the article

• Why can't I boot in to Windows Recovery Environment to fix my HDD or salvage my data?

  - by Kevin

  I've been trying to get in to WindowsRE to salvage the files on my Sony Vaio laptop after it failed to load Vista (it finally, consistently displays "Error loading operating system" after months of such intermittent failures, usually rectified via restarts or utilizing Startup Repair or CHKDSK from WindowsRE) . The problem is, after successfully accessing it once after this failure (and many times before over the course of the laptop's life), I can no longer get it to load. During the last successful access (right after the failure), I ran startup repair, which itself failed and notified me that the boot sector was corrupt. I attempted to head in to Sony's proprietary recovery tools menu, which is accessible from WindowsRE when it is loaded from the recovery partition or recovery disk, however it hung. I have since been unable to access the recovery environment after restarting, using any of these methods: Access via the recovery partition (pressing F10 on boot) Access via recovery DVD (created using the same computer when it was healthy) Access via a Windows Vista installation DVD All three methods produce the same results: The computer acknowledges the boot attempt The computer successfully gets passed the "Windows is loading files" screen The computer successfully gets passed the Windows loading screen The computer then stalls at a black screen, while showing HDD activity (via indicator light). After a few minutes, the HDD activity ceases, and after a few more minutes, the over sized cursor that is utilized in WindowsRE appears on the black screen. The actual recovery environment, however, never appears, even after leaving the computer in such a state overnight. What is fustrating is that other bootable utilities, such as SeaTools for DOS and MemTest, boot up and run fine. In running perfectly normally, MemTest was able to produce a plethora of errors utilizing my RAM. I'm inclined to believe the RAM's faultiness may causing the WindowsRE booting to fail. Would this be a valid assumption? If I'm not mistaken, booting from external media utilizes the RAM, so such a reason is plausible, assuming my knowledge of bootloading is correct. Other than that, I can't figure out any reason why all the bootable utilities except WindowsRE run fine. Does anyone know what the problem is, or could be? Any solutions?

  Read the article

• The USB mouse sticks in Windows 7 after automatic attempt to fix the boot

  - by chelder

  Avast Antivirus asked me to delete a probable virus and to restart to perform a checking. I had to stop the checking at the middle of the procedure as I needed the computer. It was imposible to turn off the computer pushing the power button (as it entered in suspension mode, no matter how long I kept pushed the power button). I removed the battery as the only way to restart the computer. Windows 7 said that there is a problem to iniziate Windows. Windows 7 tried to fix the problem without success. Windows 7 started after that though. Everything is OK but the USB mouse. The USB mouse sticks and freezes each couple of seconds more or less. The tactile mouse (PS2) works well. I googled for solutions but the posible solutions didn't work for me. What happened? How could I fix it without formatting and reinstalling everything? UPDATE: this is what I did: Change the mouse from one usb port to another Test another mouse Set the number of cores of the CPU manually with msconfig Power management: not disable usb ports Check hard disk errors

  Read the article

• How to backup a NAS drive to a USB drive?

  - by Tim Murphy

  How would you backup 600+ GB of data on a NAS (Network-Attached Storage) drive to a USB external drive? The NAS drive does not contain mission critical data nonetheless I wish to make weekly copies of it just in case. The NAS drive is almost exclusively used as an archive dump and is rarely updated. However the backup strategy used must have a simple restore procedure so I can confidently say the data now on the NAS drive is exactly how it was at the time of backup. I did try xcopy but seemed like it would take many-many hours and eventually crashed with insufficient memory. http://www.ctunion.com/node/114 suggests I would need to use xxcopy instead due to folder/file name lengths. My concern with xcopy/xxcopy is the length of time it takes. Hoping something else is faster. NAS drive is DLink DNS-313. 1TB drive installed. Connected to router via Ethernet cable. USB drive is Seagate 1TB. Can be connected to Windows Vista (preferred) or Windows 7 PCs. Both PCs are usually connected Wirelessly however ethernet cable can be used during backup to speed up the process.

  Read the article

• SQL 2008 Backups to UNC Share Failing 0xC002F210

  - by Matty Brown

  This problem is driving me NUTS!! We take backups of all of our production databases to a network share, which are then backed up to tape nightly. 8pm Mon-Fri - Full backup, followed by log backup 7am-7pm Mon-Fri, at half-hour interval - Log backup Our backups have been working in this manner since we migrated from SQL Server Standard 2000 to 2008, 3 years ago. Recently, the first log backup on Mondays have been failing. Not every time, but almost every time! The rest of the week, we've had no problems. I guess the issue may have something to do with the size of the log backup that's attempted after a weekend of no backups. Now onto the issue I need a fix for... All this week, every full backup on our biggest two databases have failed (Both backups < 1GB compressed). There's plenty of disk space on the source and destination servers. I'm guessing the issue is to do with the amount of time it takes to complete the backups of these databases, and/or the size of the backup files required to complete these backups. Changing the backup destination to local storage works fine (and very, very fast in comparison). From the Job History, I can find a few hints as to what the problem could be... Code: 0xC002F210 (Always this code, but a mix of the following descriptions...) "The operating system returned the error '64(failed to retrieve text for this error. Reason: 1815)' while attempting 'SetEndOfFile' on '\drserver\SQLBackups\Database.bak'. BACKUP DATABASE is terminating abnormally. "The operating system returned the error '64(failed to retrieve text for this error. Reason: 1815)' while attempting 'FlushFileBuffers' on '\drserver\SQLBackups\Database.bak'. BACKUP DATABASE is terminating abnormally. Please help save my hair and sanity!!

  Read the article

• gpg symmetric encryption using pipes

  - by Thomas

  I'm trying to generate keys to lock my drive (using DM-Crypt with LUKS) by pulling data from /dev/random and then encrypting that using GPG. In the guide I'm using, it suggests using the following command: dd if=/dev/random count=1 | gpg --symmetric -a >./[drive]_key.gpg If you do it without a pipe, and feed it a file, it will pop up an (n?)curses prompt for you to type in a password. However when I pipe in the data, it repeats the following message four times and sits there frozen: pinentry-curses: no LC_CTYPE known assuming UTF-8 It also says can't connect to '/root/.gnupg/S.gpg-agent': File or directory doesn't exist, however I am assuming that this doesn't have anything to do with it, since it shows up even when the input is from a file. So I guess my question boils down to this: is there a way to force gpg to accept the passphrase from the command line, or in some other way get this to work, or will I have to write the data from /dev/random to a temporary file, and then encrypt that file? (Which as far as I know should be alright due to the fact that I'm doing this on the LiveCD and haven't yet created the swap, so there should be no way for it to be written to disk.)

  Read the article

• Textmate add multiline text at end of line

  - by Yuval

  In Textmate, I am able to add text to several lines at once by clicking and holding the Option key and dragging with the mouse. say I have the following lines: foo 1: foo 2: foo 3: I can easily click and hold option and then drag down with the lines to select the text at the end of each line, and then type "bar" once and it will be added to all lines, as such: foo 1: bar foo 2: bar foo 3: bar Fantastic. The problem I run into, is when my lines aren't the same length, as such foo 19: foo 37842342346: foo 503: Now if I want to add text to the end of each line, I have to either do it manually, or choose enough space so that the longest line is not overwritten, as such: foo 19: bar foo 37842342346: bar foo 503: bar This results in a lot of unwanted whitespace in lines that don't need it. Granted, I could easily run a regular expression search to replace all multiple occurrences of a space with a single one, but I was wondering if there's a way to select all ending of lines at once without having to do that. Any idea? Thanks!

  Read the article

• AVCHD MTS h264 1080p file with choppy playback in Linux

  - by marc

  When I'm trying play video files from my camera: Seems stream 0 codec frame rate differs from container frame rate: 50.00 (50/1) -> 50.00 (50/1) Input #0, mpegts, from '00027.MTS': Duration: 00:00:38.88, start: 2.884289, bitrate: 16945 kb/s Program 1 Stream #0.0[0x1011]: Video: h264 (High), yuv420p, 1920x1080 [PAR 1:1 DAR 16:9], 50 fps, 50 tbr, 90k tbn, 50 tbc Stream #0.1[0x1100]: Audio: ac3, 48000 Hz, stereo, s16, 256 kb/s … on my Linux computer (Ubuntu 12.04), I get choppy playback. It's completly unusable... I tried: Totem VLC mplayer The result is always same issue. I sent the same video file to a friend who has ubuntu 10.04 to test, and he also has the same issue. He has Windows 7, and confirms that on Windows, the video work well. I have an Intel® Core™2 CPU 6300 @ 1.86GHz × 2 with GF 9600 GT, with closed NVIDIA drivers. This is not any kind of issue with big files playing slow from an HDD issue. I have an SSD drive! I spent the last days and nights, trying hundreds of commands for ffmpeg, handbrake, mencoder... Any of them won't let me create a file with enough quality. I downloaded few movies from YouTube in 1080p, and playback worked well without any big pixels and choppiness. I would like have highest possible quality, I will put following files onto a Blu-ray disk so I don't need to compress them to get a smaller size. I just want smoth playback on my Linux box. On Windows, the same file is working well.

  Read the article

• Remote Desktop to Server 2008 fails from one particular Win7 client

  - by Jesse McGrew

  I have a VPS running Windows Web Server 2008 R2. I'm able to connect using Remote Desktop from my home PC (Windows 7), personal laptop (Windows 7), and work laptop (Windows XP). However, I cannot connect from my work PC (Windows 7). I receive the error "The logon attempt failed" in the RDP client, and the server event log shows "An account failed to log on" with this explanation: Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: username Account Domain: hostname Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: JESSE-PC Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I can connect from the offending work PC if I start up Windows XP Mode and use the RDP client inside that. The server is part of a domain but my account is local, so I'm logging in using a username of the form hostname\username. None of the clients are part of a domain. The server uses a self-signed certificate, and connecting from home I get a warning about that, but connecting from work I just get the logon error.

  Read the article

• how to set cache control to public in iis 7.5

  - by ivymike

  I'm trying to set cache control header to max age using the following snippet in my web.config: <system.webServer> <staticContent> <clientCache cacheControlMode="UseMaxAge" cacheControlMaxAge="1.00:00:00" /> </staticContent> </system.webServer> Some how this isn't being reflected in the response. Instead I see a Cache-Control: private header on the responses. I'm using NancyFx framework (which is a layer on top of Asp.net). Is there any thing else I need to do ? Below are the reponse headers I receive: HTTP/1.1 200 OK\r\n Cache-Control: private\r\n Content-Type: application/x-javascript\r\n Content-Encoding: gzip\r\n Last-Modified: Mon, 19 Mar 2012 16:42:03 GMT\r\n ETag: 8ced406593e38e7\r\n Vary: Accept-Encoding\r\n Server: Microsoft-IIS/7.5\r\n Nancy-Version: 0.9.0.0\r\n Set-Cookie: NCSRF=AAEAAAD%2f%2f%2f%2f%2fAQAAAAAAAAAMAgAAADxOYW5jeSwgVmVyc2lvbj0wLjkuMC4wLCBDdWx0dXJlPW5ldXRyYWwsIFB1YmxpY0tleVRva2VuPW51bGwFAQAAABhOYW5jeS5TZWN1cml0eS5Dc3JmVG9rZW4DAAAAHDxSYW5kb21CeXRlcz5rX19CYWNraW5nRmllbGQcPENyZWF0ZWREYXRlPmtfX0JhY2tpbmdGaWVsZBU8SG1hYz5rX19CYWNraW5nRmllbGQHAAcCDQICAAAACQMAAADTubwoldTOiAkEAAAADwMAAAAKAAAAAkpT5d9aTSzL3BAPBAAAACAAAAACPUCyrmSXQhkp%2bfrDz7lZa7O7ja%2fIg7HV9AW6RbPPRLYLAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA%3d; path=/; HttpOnly\r\n X-AspNet-Version: 4.0.30319\r\n Date: Tue, 20 Mar 2012 09:44:20 GMT\r\n Content-Length: 1624\r\n

  Read the article

• IIS permission configuration issue

  - by Dan

  Sorry the title of this question is a little ambiguous but I don't really have any idea where the issue lies - I'm seeking some clarification of the server error logs. Basically, I had a dedicated server running Windows 2003 and Plesk (v8 I think). Last week the server hardware failed and the entire thing had to be rebuilt from scratch. New hardware was put in, new operating system (Win2008), new Plesk installation (v9.5), new software (MSSQL etc) then all data ported over manually from old C and D drives to restore all 30 client sites. It was hell! All has been okay for a couple of days now but about an hour ago POP! Suddenly all sites went down giving a 500 error. Restarting all services eventually brought everything back online, but I'm now living in total fear. It can - and probably will - happen again. The guys on support gave me the following errors from the server log: The Template Persistent Cache initialization failed for Application Pool 'ASP.NET v4.0 Classic' because of the following error: Could not create a Disk Cache Sub-directory for the Application Pool. The data may have additional error codes.. The worker process for application pool 'domain1.com(domain)(2.0)(pool)' encountered an error 'Cannot read configuration file ' trying to read configuration data from file '\\?\C:\inetpub\temp\apppools\domain1.com(domain)(2.0)(pool).config', line number '0'. The data field contains the error code. The worker process for application pool 'PleskControlPanel' encountered an error 'Cannot read configuration file ' trying to read configuration data from file '\\?\C:\inetpub\temp\apppools\PleskControlPanel.config', line number '0'. The data field contains the error code. The support guys are so ambiguous about this and it scares me horribly. Can anyone positively identify the cause of this error which lead to all client website going offline? What can be done to prevent it from happening again? Any pointers would be very much appreciated! Thanks folks...

  Read the article

< Previous Page | 628 629 630 631 632 633 634 635 636 637 638 639  | Next Page >