linux from scratch - Page 633

Samba networking with a domain-joined computer

- by MCS

I have two computers connected to the same linksys router - one running Ubuntu 8.04 and one running Windows 7. The Windows computer is part of a work domain (when connected via VPN). I'm trying to also create a home network so I can access the linux server from Windows. From what I understand, I have to first create a Windows workgroup and then configure Samba on linux to join the Windows network. So in Windows, I went to Control Panel - Network and Internet - HomeGroup and got the following message: There is currently no homegroup on your network. Because this computer also belongs to a domain, you can't create your own homegroup, but can join one created by someone on your network. Can I use Samba to create a homegroup? Is there any other way to create a Windows workgroup? Or am I barking up the wrong tree completely?

Read the article

Installation Problems & Antivirus

- by Sagar Walvekar

We have just migrated our systems from Windows to Ubuntu. We have more than 50 systems previously running Windows XP & Windows 7. After the release of 12.04 we decided to switch to Ubuntu. While we were installing Ubuntu 12.04 on Pentium 4 systems we have faced some issues. We tried it with a USB flash driver & CD. The typical configuration of the system is as follows: Pentium 4 with HT & 512 MB RAM, 40/80 GB IDE / SATA HDD. In windows there were several partitions and data on all the drives in all the systems. We have addressed this by taking backup of the C: drive on other drives & while installing Ubuntu we have just deleted & the C drive & recreated Linux partitions as follows - /root , /Boot, /Home & Swap.(in 10 GB) The problem is that the Linux gets installed without any error. However when I restart the system after the installation the system hangs in while detecting the HDD in BIOS and the system fails to start until I remove the HDD. When I installed the previous Ubuntu version it worked fine, without any hassle. Also if we install Ubuntu 12.04 on same HDD on any other higher capacity system & reconnected to old system it works fine. How can I fix this problem? Also, is there is any Antivirus which will give me real time protection on ubuntu 11 & higher versions with both 32 & 64 Bits?

Read the article

Accessing host LVM partition from Windows XP through Virt.manager 0.8.5 / Qemu / KVM

- by Nico de Smidt

Hi, requested use case is having a Windows XP SP3 guest running in 64bit Ubuntu. (Linux pcs 2.6.35-22-server #35-Ubuntu SMP Sat Oct 16 22:02:33 UTC 2010 x86_64 GNU/Linux) I want this guest to access an LVM LV on the Ubuntu disk. I've setup the following LVM config: --- Logical volume --- LV Name /dev/storage/sdc1 VG Name storage LV UUID Zg5IMC-OlqB-prL5-fgg4-3A9A-OgKP-oZ0QkJ LV Write Access read/write LV Status available # open 0 LV Size 1.01 GiB Current LE 259 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 251:3 -- 1) I've setup a storage pool for /dev/storage 2) I've mkfs.vfat /dev/storage/sdc1 3) and made a virtual IDE disk in the virt-manager setup for the guest. Target device: IDE Disk 2 Source path: /dev/storage/sdc1 -- Now when running XP (guest) Windows sees a new disk in Disk Manager and want's to install a partition on it, since it believes the drive is empty. After formatting from within Windows I can put data on the new disk volume. -- Back in Ubuntu however I cannot access this this any more since it created a partition within an LVM Logical Volume. Running fdisk -l shows the following: root@pcs:/media# fdisk -l /dev/storage/sdc1 Disk /dev/storage/sdc1: 1086 MB, 1086324736 bytes 32 heads, 63 sectors/track, 1052 cylinders Units = cylinders of 2016 * 512 = 1032192 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x8d72e4f4 Device Boot Start End Blocks Id System /dev/storage/sdc1p1 1 1050 1058368+ c W95 FAT32 (LBA) -- which seems fine to me, but when trying to mount /dev/storage/sdc1p1 I get the following error: mount /dev/storage/sdc1p1 /media/xp mount: special device /dev/storage/sdc1p1 does not exist which makes sense since in lvdisplay sdc1p1 does not exist Main question: I want to mount the vfat partition in both Ubuntu and XP What am I missing here????? regards, and thanks for your consideration. Nico

Read the article

Wolkig und heiter

- by A&C Redaktion

Mit Solaris 11 bringt Oracle das erste Betriebssystem für die Cloud auf den Markt. Wir hatten es angekündigt, das Thema Cloud wird uns hier im Blog so schnell nicht loslassen: Am Freitag hat nun Oracle sein erstes Unix-Betriebssystem auf den Markt gebracht, das explizit für die Cloud designt wurde: Solaris 11 heißt es und hier ist die Assoziation zu Stanislaw Lems gleichnamigem Science Fiction-Roman durchaus angebracht: Schließlich gilt Cloud Computing als die Technologie der Zukunft schlechthin. Was bietet Solaris 11, welchen Nutzen können die Oracle Partner daraus ziehen? "Kunden können ihre Betriebsabläufe vereinfachen, die Kapazitäten ihrer Rechenzentren erhöhen und Unternehmensanwendungen von Oracle und anderen in einer sicheren, skalierbaren Cloud oder in einer klassischen Unternehmensumgebung laufen lassen“, fasst John Fowler, Executive Vice President, Systems zusammen. Darf‘s auch etwas konkreter sein? Bitte: Oracle Solaris 11 dient ganz einfach dazu, selbst anspruchsvollste Unternehmensanwendungen in privaten, hybriden und Public Clouds zu betreiben. Als vollständig virtualisiertes Betriebssystem verfügt es über integrierte Virtualisierungs-Funktionen, sowohl für Betriebssystem- als auch für Netzwerk- und Speicher-Ressourcen. Die Server-Virtualisierung sorgt für sichere Live-Migration und flexible Einsatzmöglichkeiten – basierend auf Oracle VM für x86- und SPARC-Systeme. Höchste Verfügbarkeit wird erreicht, indem Solaris 11 ein umfassendes Management über die gesamte Infrastruktur hinweg ermöglicht. Oracle Solaris 11 bietet bereits im Standardbetrieb aktive Sicherheit „by default“, wie rollenbasierten Root-Zugriff und Überwachungsfunktionen. Die Daten- und Speichermanagement-Basis für Oracle Solaris 11 ist Oracle Solaris ZFS. Neben garantierter Datenintegrität erlaubt das Tiered Storage das Einrichten von Pools mit Flash-Speicher und zudem Hochgeschwindigkeitsverschlüsselung. Ein Blick in die Presse zeigt, dass Solaris 11 durchaus für Aufsehen in der Fachwelt sorgt, so äußert sich etwa die Netzwelt sehr positiv: „Die neue Paketverwaltung IPS trägt wie die genannten Neuerungen dazu bei, dass Solaris es in Version 11 durchaus wieder mit den etablierten Linux-Distributionen aufnehmen kann. Das Betriebssystem macht nicht nur im Server-, sondern auch im Desktop-Einsatz eine sehr gute Figur und glänzt mit hoher Stabilität.“ Hier die direkten Links zu weiteren Berichten über Solaris11 in der Fachpresse: Heise onlineZDNetGolem.deSilicon.deAll about SECURITYIT DirectorPro-Linux.deTech ChannelLinux Magazin

Read the article

sudo apt-get install -f doesn't fix broken packages. And now?

- by Du Oliveira

$ sudo apt-get install -f [sudo] password for ...: Lendo listas de pacotes... Pronto Construindo árvore de dependências Lendo informação de estado... Pronto Corrigindo dependências... Pronto Os seguintes pacotes foram instalados automaticamente e já não são necessários: python-pyasn1 libconfig++8 python-twisted-runner linux-headers-3.0.0-12 libvamp-sdk2 python-twisted-mail libgnomecanvasmm-2.6-1c2a python-twisted-lore python-twisted-conch python-twisted-news python-twisted-words python-twisted libffado2 linux-headers-3.0.0-12-generic libaubio2 Use 'apt-get autoremove' para removê-los. Os pacotes extra a seguir serão instalados: libmpeg3cine Os NOVOS pacotes a seguir serão instalados: libmpeg3cine 0 pacotes atualizados, 1 pacotes novos instalados, 0 a serem removidos e 0 não atualizados. 2 pacotes não totalmente instalados ou removidos. É preciso baixar 0 B/2.573 kB de arquivos. Depois desta operação, 6.762 kB adicionais de espaço em disco serão usados. Você quer continuar [S/n]? S (Lendo banco de dados ... 317732 ficheiros e directórios actualmente instalados.) Desempacotando libmpeg3cine (de .../libmpeg3cine_1%3a2.2-0.3~ppa1~oneiric1_i386.deb) ... dpkg: erro processando /var/cache/apt/archives/libmpeg3cine_1%3a2.2-0.3~ppa1~oneiric1_i386.deb (--unpack): a tentar sobre-escrever '/usr/bin/mpeg3cat', que também está no pacote mpeg3-utils 1.5.4-5ubuntu1 Erros foram encontrados durante o processamento de: /var/cache/apt/archives/libmpeg3cine_1%3a2.2-0.3~ppa1~oneiric1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) .....:~$ apt-get autoremove E: Não foi possível abrir arquivo de trava /var/lib/dpkg/lock - open (13: Permissão negada) E: Não foi possível travar o diretório administrativo (/var/lib/dpkg/), você é root?

Read the article

How do freelancers know how much their work is worth?

- by Qmal

I want to start a bit of freelancing in web development using ASP.NET MVC3 and PHP and I already have some people who are interested in hiring me, but I still can't figure out how much to charge for projects since I have never done it. For example how much would this site cost? Would it cost more if the author built it from scratch instead of using WordPress as the CMS? Or what about a simpler site like this? How much time spent is considered good/normal for building sites like these? And maybe some freelancers with experience can tell me what the usual requests are that they get from clients. What sites are the most in demand? I'm asking because I'm a student and I really can't work every day in a full-time job but I need the money so I guess a little freelancing would help me out.

Read the article

Converting an EC2 AMI to vmdk image

- by Reed G. Law

I've come quite close to getting Amazon Linux to boot inside VirtualBox, thanks to this answer and these websites. A quick overview of the steps I've taken: Launch EC2 instance with Amazon Linux 2011.09 64-bit AMI dd the contents of the EBS volume over ssh to a local image file. Mount the image file as a loopback device and then to a local mount point. Create a new empty disk image file, partition with an offset for a bootloader, and create an ext4 filesystem. Mount the new image's partition and copy everything from the EC2 image. Install grub (using Ubuntu's grub-legacy-ec2 package, not grub2). Convert the image file to vmdk using qemu-img. Create a new VirtualBox VM with the vmdk. Now the VM boots, grub loads, and the kernel is found. But it fails when it tries to mount the root device: dracut Warning: No root device "block:/dev/xvda1" found dracut Warning: Boot has failed. To debug this issue add "rdshell" to the kernel command line. dracut Warning: Signal caught! dracut Warning: Boot has failed. To debug this issue add "rdshell" to the kernel command line. Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.35.14-107.1.39.amzn1.x86_64 #1 I have tried changing /boot/grub/menu.lst to find the root device by label and UUID, but nothing works. I'm guessing the xen kernel is not compatible with VirtualBox. The reasoning behind all this effort is to make a Vagrant box that is as close to possible as the production enviroment, so deploys can be tested locally. I know it's cheap to do test runs on EC2, but poor connectivity often ruins the experience. Plus it would be really nice to have a virtual machine with the production environment so that co-workers don't have to install everything under the sun just to get up and running with app development. If I were to try running a different kernel, what kernel could I get to be as close as possible to Amazon Linux 2011.09?

Read the article

Second monitor not detected

- by configurator

Note: I've seen this question quite a lot, but in all the cases I could find with answers, the answer was either "I don't know" or "use nvidia-settings (which is irrelevant to me)." I'm using Intel Sandybridge Desktop graphics, with a P8H61-M LE motherboard. How do I get Ubuntu to detect my second monitor? Clicking "Detect Displays" here doesn't do anything. Here's some system info: $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) $ uname -a Linux clyde 3.5.0-13-generic #13-Ubuntu SMP Tue Aug 28 08:31:47 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ hardinfo [copied from the UI] -Display- Resolution : 1920x1080 pixels Vendor : The X.Org Foundation Version : 1.12.3 -Monitors- Monitor 0 : 1920x1080 pixels -Extensions- BIG-REQUESTS Composite DAMAGE DOUBLE-BUFFER DPMS DRI2 GLX Generic Event Extension MIT-SCREEN-SAVER MIT-SHM RANDR RECORD RENDER SECURITY SGI-GLX SHAPE SYNC X-Resource XC-MISC XFIXES XFree86-DGA XFree86-VidModeExtension XINERAMA XInputExtension XKEYBOARD XTEST XVideo -OpenGL- Vendor : Intel Open Source Technology Center Renderer : Mesa DRI Intel(R) Sandybridge Desktop Version : 3.0 Mesa 8.1-devel Direct Rendering : Yes I've tried upgrading everything from ppa:xorg-edgers/ppa and ppa:glasen/intel-driver. I've also installed various tools I've found in other threads (e.g. hardinfo) but they weren't really helpful to me as I don't know what to make of the data. How do I get Ubuntu to detect my second monitor?

Read the article

Teaching logical/analytical thinking

- by Joshua

I have been trial running a club in which I teach programming for the past year and while they have progressed what they really lack is the most fundamental concept to programming, analytical thinking. As I now approach the second year of teaching to the children (aged 12 - 14) I am now realising that before I begin teaching them the syntax and how to actually program an app (or what they would rather, a game) I need to introduce them to analytical thinking first. I have already found Scratch and similar things such as Light-Bot and will most certainly be using the, to teach them how to implement their logical thinking but what I really need are some tips or articles on how to teach analytical thinking itself to children aged 12 - 14. What I'm looking for are some ideas on how to teach the kind of thinking that these kids will need in order to get them into programming, whether that be analytical, logical or critical. How and what should I teach them relating to the way their minds need to be wired when programming solutions to problems?

Read the article

Add a remote printer over ssh on OSX?

- by GradGuy

I have a printer at my office that is connected to a local network and my linux box at work can see it on the network. However, it is not visible to the outside world. I was trying to figure out a way to add it on my MacAir and so far have found two options: 1) Using ssh tunnel via CLI: cat file.pdf | ssh user@linuxbox lpr. 2) With Chrome installed on the linux box, using the Google Cloud Print service on the remote box and automator on my MacAir I can add the printer to Cmnd+p dialog box I like the first method since it does not require Chrome be installed and the second one since it allows to use Cmnd+p inside all applications. I was wondering if there is a way to combine by using automator to run the first command line script. What about port forwarding? Is it possible to forward the remote CUPS 631 port to a local port and then add the printer normally? What other methods would you recommend?

Read the article

ORA-12705: invalid or unknown NLS parameter value specified

- by viky

I have a j2ee application hosted on jboss and linux platform. When I try to access the application , I see following error in server.log file. ORA-12705: invalid or unknown NLS parameter value specified When I point the same jboss instance to a different schema, the application works fine. I tried to go through few forum and found that the NLS parameter settings are fine. Can anyone help. Jboss version = 4.0.2 DB version = oracle 10.2 output of locale command on linux $ locale LANG=en_US.UTF-8 LC_CTYPE="en_US.UTF-8" LC_NUMERIC="en_US.UTF-8" LC_TIME="en_US.UTF-8" LC_COLLATE="en_US.UTF-8" LC_MONETARY="en_US.UTF-8" LC_MESSAGES="en_US.UTF-8" LC_PAPER="en_US.UTF-8" LC_NAME="en_US.UTF-8" LC_ADDRESS="en_US.UTF-8" LC_TELEPHONE="en_US.UTF-8" LC_MEASUREMENT="en_US.UTF-8" LC_IDENTIFICATION="en_US.UTF-8" LC_ALL=

Read the article

what is the simplest 3d software for unity?

- by kdavis8

Ive heard a lot about Daz studio, Poser, Maya, K-3d, Anim8or, Blender, and all the rest. My question is which one is the best choice in terms of simplicity and quality. price is not an issue really. I'm programming games in java for android mobile devices at the moment but i will eventually move onto larger platforms. I would like to utilize unity3d for the game programming itself and utilize a 3d modeling software just to create the game objects. I just need to know the best one to get started with from scratch or should i use a combination of multiple ones? Any insight for this would be great, thanks!

Read the article

Missing Operating System after trying to upgrade to Ubuntu 11

- by Mauricio

there! After trying to upgrade from Ubuntu 10.04 to 11, the upgrading process stopped when running and then I got an "out of disk, grub rescue" message when booting. After running Boot Repair, I got this results. Now I get "Missing Operating System" whent trying to boot. Bellow I show some results from some commands I gather from help foruns, but I still reached no solution. Could you please help me? Any enlightment will be very helpful! Disk Utility says "Disk has a few bad sectors". When trying to run the Self-test I get "FAILED (Read)" Here we have what Gparted says about the /dev/sda1 partition (ext4): Flags: boot Status: not mounted Warning: e2label: Attempt to read block from filesystem resulted in short read while trying to open /dev/sda1Couldn`t find valid filesystem superblockUnable to read the contents of this filesystem! From sudo fdisk -lI got: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0x000e0596 Device Boot Start End Blocks Id System/dev/sda1 * 2048 607428607 303713280 83 Linux/dev/sda2 607430654 625141759 8855553 5 Extended/dev/sda5 607430656 625141759 8855552 82 Linux swap / SolarisDisk /dev/sdb: 320.1 GB, 320072933376 bytes255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c3c41 Device Boot Start End Blocks Id System /dev/sdb1 * 63 625137344 312568641 c W95 FAT32 (LBA) " and fromsudo fdisk /dev/sda1I got fdisk: unable to read /dev/sda1: Inappropriate ioctl for device` From sudo mount /dev/sda1 /mntI got: mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so From sudo update-grubI got: error: cannot read from `/dev/sda'. /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?).

Read the article

Wireless not working on desktop with Asus USB-N13 (B1) wireless adapter

- by user900749

I am trying to connect my desktop to a wireless network. I have purchased an ASUS USB-N13 B1 adapter. I have followed instructions for installing drivers and disabling conflicting drivers. I have thoroughly searched and could not find a solution. The adapter is recognized and powered on. I have entered the ssid and password information into the wireless network configuration. Other machines can connect to this wireless network, and the machine can connect online via ethernet without issue. Here is the output of some commands which summarize my configuration, and might give some clues : ~$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" ~$ uname -a Linux petra 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux ~$ lsusb Bus 001 Device 006: ID 0b05:17ab ASUSTek Computer, Inc. ~$ dmesg [ 1883.823150] wlan0: authenticate with 48:5b:39:e7:25:5e (try 1) [ 1884.020027] wlan0: authenticate with 48:5b:39:e7:25:5e (try 2) [ 1884.220025] wlan0: authenticate with 48:5b:39:e7:25:5e (try 3) [ 1884.420023] wlan0: authentication with 48:5b:39:e7:25:5e timed out Any assistance would be appreciated as I have been trying to get this machine online for several weeks now to no avail. Sincerely, Michael.

Read the article

Partition Bootable Flash Drive

- by iAndr0idOs

I created a bootable flash drive with Chromium OS installed on it. However, Chromium OS only needs about 4GB of space, and my flash drive is 8GB. I wanted to make the rest of the 4GB a FAT32 partition, but when I look at GParted, I have 12 different partitions on the flash drive with unallocated space scattered everywhere. I made the bootable flash drive with Ubuntu Linux's usb-imagecreator I run Ubuntu Linux 11.04 x86_64 and Windows 7 Professional x64 If any of you have experience with this, any help would be appreciated. Thanks!

Read the article

Ubuntu security with services running from /opt

- by thejartender

It took me a while to understand what's going on here (I think), but can someone explain to me if there are security risks with regards to my logic of what's going on here as I am trying to set up a home web server as a developer with some good Linux knowledge? Ubuntu is not like other systems, as it has restricted the root user account. You can not log in as root or su to root. This was a problem for me as I have had to install numerous applications and services to /opt as per user documentation (XAMPPfor Linux is a good example). The problem here is that this directory is owned by root:root. I notice that my admin user account does not belong to root group through the following command: groups username so my understanding is that even though the files and services that I place in /opt belong to root, executing them by means of sudo (as required) does not mean that they are run as root? I imagine that the sudo command is hidden somewhere under belonging to the root user and has a 775 permission? So the question I have is if running a service like Tomcat, Apcahe, etc exposes my system like on other systems? Obviously I need to secure these in configurations, but isn't the golden rule to never run something as root? What happens if I have multiple services running under same user/group with regards to a compromised server?

Read the article

Add Windows 7 to boot menu

- by Cumatru

Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS - system restore /dev/sda2 13 4674 37436416 7 HPFS/NTFS - Windows 7 /dev/sda3 4674 58843 435116032 7 HPFS/NTFS - data storage /dev/sda4 58843 60802 15728640 83 Linux - Ubuntu 10.10 Initially i´ve installed StartUpManager. This ( i think ) added another 4 instances of Linux + memtest to my boot menu list. Altough, i din´t see any boot menu. It boots into Ubuntu after a few seconds. I´ve tried to add windows 7, but i did not succeed. This is a part of my menu.lst file. title Ubuntu 10.10, kernel 2.6.35-24-generic uuid 1c9748e2-2f11-4a6c-91c0-7310d48c4a7a kernel /boot/vmlinuz-2.6.35-24-generic root=UUID=1c9748e2-2f11-4a6c-91c0-7310d48c4a7a ro quiet splash initrd /boot/initrd.img-2.6.35-24-generic title Chainload into GRUB 2 root 1c9748e2-2f11-4a6c-91c0-7310d48c4a7a kernel /boot/grub/core.img title Ubuntu 10.10, memtest86+ uuid 1c9748e2-2f11-4a6c-91c0-7310d48c4a7a kernel /boot/memtest86+.bin menuentry “Windows 7? { set root=(hd0,2) chainloader +1 } And this is after a upgrade-grub Searching for GRUB installation directory ... found: /boot/grub Searching for default file ... found: /boot/grub/default Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst Searching for splash image ... none found, skipping ... Found kernel: /boot/vmlinuz-2.6.35-24-generic Found kernel: /boot/vmlinuz-2.6.35-22-generic Found GRUB 2: /boot/grub/core.img Found kernel: /boot/memtest86+.bin Updating /boot/grub/menu.lst ... done Later Edit: Ive added the following in 40_custom from /etc/grub.d/ and ive decommented hidden menu line from menu.lst, but i still cant see any boot menu. Ive also tried to press ESC and SHIFT. menuentry "Windows 7 (loader) (on /dev/sda1)" { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda1)" { insmod part_msdos insmod ntfs set root='(hd0,msdos0)' chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda1)" { set root= hd(0,0) chainloader +1 } menuentry "!Windows 7 (loader) (on /dev/sda1)" { set root= hd(0,1) chainloader +1 } menuentry "!!Windows 7 (loader) (on /dev/sda1)" { set root= hd(0,2) chainloader +1 }

Read the article

Firefox 15 hangs with Ubuntu kernel update

- by Marty

I recently ran updates and it told me that in order to get those updates I had to update my kernel. I did that and also updated Firefox to 15. Since then Firefox hangs/gray screens sites I go to. This lasts anywhere from 5-10 seconds to 2-3 minutes. I have restarted Firefox with all add-ons disabled but it still did the same thing. I found a bug report on Launchpad that sounded like what was happening with me, but I haven't received any error codes, just the hanging/frozen screens. Also it seems that it ups my CPU making the rest of Ubuntu lag while Firefox is hung. I would guess the cause is a conflict between the updated kernel and the updated Firefox, but I'm still fairly new at Ubuntu and not sure where to go from here. Is there anything else to try? My Toshiba laptop specs are: Ubuntu 12.04 (32 bit) Linux 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux Firefox 15.0.1 Intel® Pentium(R) Dual CPU T3400 @ 2.16GHz × 2 Mobile Intel® GM45 Express Chipset x86/MMX/SSE2 Thanks!

Read the article

Open source level editor for HTML5 platform game?

- by Lai Yu-Hsuan

A natty GUI editor is very helpful to create level map. I want to use some open-source choices rather than build my own from scratch. I found Tiled Map Editor but it doesn't work for what I want. Though I'm building HTML5 game, I don't have to use a HTML5 level editor as long as it can output well-formatted map files which my javascript can read. Edit: Sorry for the confusion. Tiled does not work for me because to make the player perform a 'tricky' jump, sometimes I want to set the distance between two platforms to, say, 7/3 or 8/3 tiles. But in Tiled I get only 2 or 3. If Tiled can do this, please teach me.

Read the article

Ubuntu 12.04 - Brightness controls not working

- by Juan Manuel Zolezzi Volpi

Controls from "Brightness and Lock" were not working so I've tried a solution that involved changing grub, which I'm detailing below: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX="quiet splash acpi_backlight=vendor" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" After doing this, the brightness control dissapeared like you can see at http://screencloud.net/img/screenshots/6b90d56604b70cc749a632d0bc005a20.png Any ideas? Would love to be able to configure Brightness or even use apps like F.lux to regulate it automatically. Edit: I've modified the following line to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=" and now the brightness controls are back, but whatever I change the brightness remains the same. Just in case I'm using Intel H77

Read the article

CentOS 7: PHP high CPU usage

- by HTF

I've migrated Observium monitoring platform from CentOS 6.5 to CentOS 7 and I've noticed high CPU usage mostly caused by PHP, the CPU load increase when pooling script is running (poller-wrapper.py). Both VMs are running on the same physical host (KVM hypervisor) with exactly the same spec. I also tested this with a simple PHP benchmark script and CentOS 7 is slower - is it strictly related to PHP version (5.4.30 vs 5.4.16)? CentOS 6.5 [root@centos6:~]# php -f bench.php -------------------------------------- | PHP BENCHMARK SCRIPT | -------------------------------------- Start : 2014-08-19 22:26:34 PHP version : 5.4.30 Platform : Linux -------------------------------------- test_math : 1.610 sec. test_stringmanipulation : 1.416 sec. test_loops : 0.822 sec. test_ifelse : 0.729 sec. -------------------------------------- Total time: : 4.577 sec. CentOS 7 [root@centos7:~]# php -f bench.php -------------------------------------- | PHP BENCHMARK SCRIPT | -------------------------------------- Start : 2014-08-19 22:27:58 PHP version : 5.4.16 Platform : Linux -------------------------------------- test_math : 2.117 sec. test_stringmanipulation : 1.246 sec. test_loops : 1.174 sec. test_ifelse : 0.752 sec. -------------------------------------- Total time: : 5.289 sec. CPU usage increased right after migration:

Read the article

Swap, Swapiness and Standby: swapping starts when waking up

- by mdo

I'm running running Ubuntu 12.04 on a Lenovo W500 (Core2Duo T9400, 4GB Ram) Current kernel: 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux -- but the problems exists since a couple of months, surviving quite a few software (includig kernel) updates I regularly put my machine into suspend-to-ram (S3) and when the machine comes back up Ubuntu starts to swap out processes. I was able to observe that the used swap-space starts to grow right after the box returns. See munin graphs below, the gap (obviously) shows the timeframe in STR. Needless to say that the box becomes unusable while swapping, load goes up beyond 10. What I've done so far: lowered swappiness from default (60) to 10 (via /etc/sysctl.conf: vm.swappiness=10) -- this has improved the situation much, but sometimes the problem comes back, I have not found a trigger (like memory usage) for this for now lowered swappiness to 5 -- perhaps this has brought an improvement again Before going to STR the box ran stable without (swapping) problems for hours. Today when the issue showed up again I used this script (- http://stackoverflow.com/questions/479953/how-to-find-out-which-processes-are-swapping-in-linux) to find what processes have the most used swap space. The result after the swap orgy is like that (all PIDs with more than 10M usage): Overall swap used: 2121344 kB ======================================== kB pid name ======================================== 439520 17491 java 208148 22719 firefox 136640 4337 /usr/bin/quodli 120852 5271 chrome 81832 5264 chrome 74284 17003 chrome 65368 16960 chrome 57088 3675 chrome 56184 30923 chrome 54412 11331 chrome 54264 3878 chrome 51508 18382 chrome 50088 3163 zeitgeist-fts 49772 15543 chrome 41344 15355 compiz 35040 1161 mysqld 32124 18374 chrome 30940 11339 chrome 30044 5752 chrome 28780 4235 plugin-containe 24576 31246 empathy-chat 23840 17703 chrome 22512 3207 ubuntuone-syncd 21588 1937 ntop 18336 2021 asterisk 17200 3915 chrome 13964 1935 Xorg 12036 10679 chrome 11104 30782 empathy 11056 2889 python 10932 16565 knotify4 The java instance at the top is IntelliJ. IntelliJ, Firefox and Chrome also were all used right before the box was put to STR. So my question is: can I somehow prevent these swapouts AND why do they happen? Is it perhaps related to some misidentification of idle processes? I'm not looking for resolutions like: turn off swap buy more RAM Thanks in advance!

Read the article

Why does an error appear every time I try to open the Ubuntu Software Center? [duplicate]

- by askubuntu7639

This question already has an answer here: How do I remove a broken software source? 3 answers There is a glitch on the Ubuntu Software Center and whenever I open it an error appears and it keeps loading and never opens. Why does this happen? I have installed Ubuntu 13.04 on a disk and partitioned it. Please help me and ask for excess information if you need it. If you know of any duplicates please show me them!! This is the output of a question someone asked me. SystemError: E:Type '<!DOCTYPE' is not known on line 1 in source list /etc/apt/sources.list.d/medibuntu.list This next output is the output of cat /etc/apt/sources.list.d/medibuntu.list </div> <div style="float:left;"> <div class="textwidget"><script type="text/javascript"> </div> Unixmen Archive Select Month September 2013 August 2013 July 2013 June 2013 May 2013 April 2013 March 2013 February 2013 January 2013 December 2012 November 2012 October 2012 September 2012 August 2012 July 2012 June 2012 May 2012 April 2012 March 2012 February 2012 January 2012 December 2011 November 2011 October 2011 September 2011 August 2011 July 2011 June 2011 May 2011 April 2011 March 2011 February 2011 January 2011 December 2010 November 2010 October 2010 September 2010 August 2010 July 2010 June 2010 May 2010 April 2010 March 2010 February 2010 January 2010 December 2009 November 2009 October 2009 September 2009 August 2009 July 2009 June 2009 May 2009 April 2009 March 2009 February 2009 January 2009 December 2008 Tags Cloudandroid apache browser Centos chrome command line Debian eyecandy Fedora firefox games gaming gnome google karmic koala kde libreoffice Linux linux distribution LinuxMint lucid lynx maverick meerkat mysql news oneiric ocelot openoffice opensource opensuse oracle ppa Precise Pangolin release RHEL security server software themes tools ubuntu unix upgrade virtualbox vlc windows wine Unixmen Twitts Firefox 16, a treat for developers http://t.co/cnd27CzT Ubuntu 12.10 ‘Quantal Quetzal’: Beta 2 Sneak Peek http://t.co/hd4LwDOy Top 5 security Myths about Linux; and their realities http://t.co/zO1LgHST About Us Advertising Sitemap Privacy Contact Us Hire Us Copyright © 2008-2013 Unixmen.com . Maintained by Unixmen . /* */ jQuery(document).on('ready post-load', easy_fancybox_handler ); http://www.w3-edge.com/wordpress-plugins/ Page Caching using apc Database Caching 3/186 queries in 0.035 seconds using apc Content Delivery Network via 180016988.r.cdn77.net Served from: www.unixmen.com @ 2013-09-25 01:38:14 by W3 Total Cache

Read the article

GParted in UBUNTU shows entire disk as UNALLOCATED SPACE

- by msPeachy

Good day to everyone. I hope someone can help me with my problem. I have a dual boot Windows and Ubuntu system. I recently encountered an hd0 out of disk error and wasn't able to boot Ubuntu. So I booted into Windows, after 2 to 3 times of booting and rebooting Windows, I tried booting Ubuntu but still I get the hd0 out of disk error. I decided to run Ubuntu from LIVEUSB to try to fix my Ubuntu partition using GParted, but when I run GParted, it shows my entire disk as UNALLOCATED SPACE! The strange thing is that Nautilus still shows and mounts my partitions. Also every time I boot into Windows , my partitions exists and I am able to read and write to them. I have no idea what is wrong. Please help! I can't stand using Windows since most of the tools I use are in Ubuntu. I don't mind reinstalling Ubuntu. In fact I already tried reinstalling using the LIVEUSB but I wasn't able to, since GParted or the Ubuntu installer itself does not recognized my partitions and shows the entire disk as unallocated space. I am currently running Ubuntu from LIVEUSB. Here's the outpuf of sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb30ab30a Device Boot Start End Blocks Id System /dev/sda1 * 2048 104869887 52433920 83 Linux /dev/sda2 104869888 105074687 102400 7 HPFS/NTFS/exFAT /dev/sda3 105074688 156149759 25537536 7 HPFS/NTFS/exFAT /dev/sda4 156151800 625153409 234500805 f W95 Ext'd (LBA) /dev/sda5 156151808 169156591 6502392 82 Linux swap / Solaris /dev/sda6 169158656 294991871 62916608 7 HPFS/NTFS/exFAT /dev/sda7 294993920 471037944 88022012+ 7 HPFS/NTFS/exFAT /dev/sda8 471041928 625121152 77039612+ 7 HPFS/NTFS/exFAT When I run, sudo parted -l, I got this error message: ubuntu@ubuntu:~$ sudo parted -l Error: Can't have a partition outside the disk!

Read the article

Installing the Newest KeePass for MacOSX from Source

- by firebush

I've transitioned our passwords to KeePass. LastPass looks cool, but I prefer a system where we control the database locally rather than it being kept in the cloud. I have a windows and Linux system and both are able to access our KeePass database easily. On my Linux system (Ubuntu), I simply installed KeePass via synaptic and it just worked. So everything was working great, until my wife tried to set up things on her MacBook to access the database. Huge problems. It was so easy on Linux that I didn't expect there to be issues there. In case it's helpful, she's running a fresh install of Mac OSX 10.5.8, Leopard. We simply went to the download site for KeePass: http://keepass.info/download.html Clicked on the link titled KeePass 2.x for Mac OS X from which we retrieved Mono 2.10.5 and KeePass 2.18 from that site (the packages posted there at the time of this writing). Mono installed without problems (at least, none that we saw). She opened the KeePass image and dragged it to the Application side, unpackaging it there. According to the instructions on the KeePass installation instructions, she opened a terminal, changed to the directory in /Applications containing KeePass.exe, and ran it through mono: mono KeePass.exe No application opens at all - we see a blip for it, but then it immediately goes away, indicating to us that it is crashing. Also disconcerting, I see that people are throwing fits about copy-and-paste not working for KeePass 2.18 on MacOSX. Judging from the 2.19 addresses the copy/paste issue. I'm hoping that version will solve all our issues. So here's my question: how can I try out 2.19 on her system. It doesn't seem to be packaged like the 2.18 one is. But we're not scared of building it. I see that the source for 2.19 is here (at the bottom of the page). Can I just download that to her machine somewhere and run something to build it? I'm familiar with automake but not with building .NET source, so please answer gently if this is stupidly easy. :^) btw: tomorrow's my wife's birthday, and this is getting her down. If you know how to navigate these issues, it would be a nice birthday gift for her. Thanks in advance! Update I'll post this since it might be helpful to someone else: I got KeePass 2.18 to run by updating Mono to 2.10.9 (rather than the 2.10.5 given by the site above). With the later version of Mono, it runs without crashing. And yet, I do see the copy and paste issue that others see. I can open a database on her machine, but the incorrect data get's copied. So again, can someone help me install KeePass 2.19? Thanks!

Search Results

Search found 26179 results on 1048 pages for 'linux from scratch'.

Page 633/1048 | < Previous Page | 629 630 631 632 633 634 635 636 637 638 639 640 | Next Page >

- by MCS

- by Sagar Walvekar

- by Nico de Smidt

- by A&C Redaktion

- by Du Oliveira

- by Qmal

- by Reed G. Law

- by configurator

- by Joshua

- by GradGuy

- by viky

- by kdavis8

- by Mauricio

- by user900749

- by iAndr0idOs

- by thejartender

- by Cumatru

- by Marty

- by Lai Yu-Hsuan

- by Juan Manuel Zolezzi Volpi

- by HTF

- by mdo

- by askubuntu7639

- by msPeachy

- by firebush

< Previous Page | 629 630 631 632 633 634 635 636 637 638 639 640 | Next Page >