entry level - Page 636 - Developer IT

Is this scatter-brained workflow realizable in Git?

- by Luke Maurer

This is what I'd like my workflow to look like at a conceptual level: I hack on my new feature for a while I notice a typo in a comment I change it Since the typo is completely unrelated to anything else, I put that change in a pile of comment fixes I keep working on the code I realize I need to flesh out a few utility functions I do so I put that change in its own pile Steps 2, 3, and 4 each repeat throughout the day I finish the new feature and put the changes for that feature in a pile I push nice patches upstream: One with the new feature, a few for the other tweaks, and one with a bunch of comment fixes if enough have accumulated Since I'm both lazy and a perfectionist, I want to be able to do some things out of order: I might correct a typo but forget to put it in the comment fix pile; when I prepare the upstream patches (I'm using git-svn, so I need to be pretty deliberate about these), I'll then pull out the comment fixes at that point. I might forget to separate things altogether until the very end. But I might /also/ have committed some of the piles along the way (sorry, the metaphor is breaking down …). This is all rather like just using Eclipse changesets with SVN, only I can have different changes to the same file in different piles (having to disentangle changes into different commits is what motivated me to move to git-svn, in fact …), and with Git I can have my full discombobulated change history, experimental branches and all, but still make a nice, neat patch. I've just recently started with Git after having wanted to for a good while, and I'm quite happy so far. The biggest way in which the above workflow doesn't really map into Git, though, is that a “bin” can't really be just a local branch, since the working tree only ever reflects the state of a single branch. Or maybe the Git index is a “pile,” and what I want is to have more than one somehow (effectively). I can think of a few ways to approximate what I want (maybe creative use of stash? Intricate stash-checkout-merge dances?), but my grasp on Git isn't solid enough to be sure of how best to put all the pieces together. It's said that Git is more a toolkit than a VCS, so I guess the question comes down to: How do I build this thing with these tools?

Read the article

Ruby on rails model and controllers inside of different namespaces

- by Nelson LaQuet

OK. This is insane. I'm new to RoR and I really want to get into it as everything about it that I have seen so far makes it more appealing to the type of work that I do. However, I can't seem to accomplish a very simple thing with RoR. I want these controlers: /admin/blog/entries (index/show/edit/delete) /admin/blog/categories (index/show/edit/delete) /admin/blog/comments (index/show/edit/delete) ... and so on And these models: Blog::Entry (table: blog_entries) Blog::Category (table: blog_categories) Blog::Comments (table: blog_comments) ... and so on Now, I have already gone though quite a bit of misery to make this work. My first attempt was with generating scaffolding (I'm using 2.2.2). I generated my scaffolding, but had to move my model, then fix the references to the model in my controller (see http://stackoverflow.com/questions/903258/ruby-on-rails-model-inside-namespace-cant-be-found-in-controller). That is already a big of a pain, but hey, I got it to work. Now though form_for won't work and I cannot figure out how to use the url helpers (I have no idea what these are called... they are the automatically generated methods that return URLs to controllers associated with a model). I cannot figure out what their name is. My model is Blog::Entries. I have tried to mess with the route.rb's map's resource method, but no luck. When I attempt to use form_for with my model, I get this error undefined method `blog_entries_path' for #<ActionView::Base:0xb6848080> Now. This is really quite frustrating. I am not going to completely destroy my code's organization in order to use this framework, and if I cannot figure out how to accomplish this simple task (I have been researching this for at least 5 hours) then I simply cannot continue. Are there any ideas on how to accomplish this? Thanks EDIT Here are my routes: admin_blog_entries GET /admin_blog_entries {:controller=>"admin_blog_entries", :action=>"index"} formatted_admin_blog_entries GET /admin_blog_entries.:format {:controller=>"admin_blog_entries", :action=>"index"} POST /admin_blog_entries {:controller=>"admin_blog_entries", :action=>"create"} POST /admin_blog_entries.:format {:controller=>"admin_blog_entries", :action=>"create"} new_admin_blog_entry GET /admin_blog_entries/new {:controller=>"admin_blog_entries", :action=>"new"} formatted_new_admin_blog_entry GET /admin_blog_entries/new.:format {:controller=>"admin_blog_entries", :action=>"new"} edit_admin_blog_entry GET /admin_blog_entries/:id/edit {:controller=>"admin_blog_entries", :action=>"edit"} formatted_edit_admin_blog_entry GET /admin_blog_entries/:id/edit.:format {:controller=>"admin_blog_entries", :action=>"edit"} admin_blog_entry GET /admin_blog_entries/:id {:controller=>"admin_blog_entries", :action=>"show"} formatted_admin_blog_entry GET /admin_blog_entries/:id.:format {:controller=>"admin_blog_entries", :action=>"show"} PUT /admin_blog_entries/:id {:controller=>"admin_blog_entries", :action=>"update"} PUT /admin_blog_entries/:id.:format {:controller=>"admin_blog_entries", :action=>"update"} DELETE /admin_blog_entries/:id {:controller=>"admin_blog_entries", :action=>"destroy"} DELE

Read the article

validating cascading dropdownlist

- by shruti

i am working on MVC.Net. in that i have used cascading dropdownlist. I want to do validations for blank field. the view page coding is: Select Category: <%= Html.DropDownList("Makes", ViewData["Makes"] as SelectList,"Select Category")% Select Subcategory: <%= Html.CascadingDropDownList("Models", "Makes")% the code on controller: public ActionResult AddSubCategoryPage() { var makeList = new SelectList(entityObj.Category.ToList(), "Category_id", "Category_name"); ViewData["Makes"] = makeList; // Create Models view data var modelList = new CascadingSelectList(entityObj.Subcategory1.ToList(), "Category_id", "Subcategory_id", "Subcategory_name"); ViewData["Models"] = modelList; return View("AddSubCategoryPage"); } and for that i have made one class: public static class JavaScriptExtensions { public static string CascadingDropDownList(this HtmlHelper helper, string name, string associatedDropDownList) { var sb = new StringBuilder(); // render select tag sb.AppendFormat("<select name='{0}' id='{0}'></select>", name); sb.AppendLine(); // render data array sb.AppendLine("<script type='text/javascript'>"); var data = (CascadingSelectList)helper.ViewDataContainer.ViewData[name]; var listItems = data.GetListItems(); var colArray = new List<string>(); foreach (var item in listItems) colArray.Add(String.Format("{{key:'{0}',value:'{1}',text:'{2}'}}", item.Key, item.Value, item.Text)); var jsArray = String.Join(",", colArray.ToArray()); sb.AppendFormat("$get('{0}').allOptions=[{1}];", name, jsArray); sb.AppendLine(); sb.AppendFormat("$addHandler($get('{0}'), 'change', Function.createCallback(bindDropDownList, $get('{1}')));", associatedDropDownList, name); sb.AppendLine(); sb.AppendLine("</script>"); return sb.ToString(); } } public class CascadingSelectList { private IEnumerable _items; private string _dataKeyField; private string _dataValueField; private string _dataTextField; public CascadingSelectList(IEnumerable items, string dataKeyField, string dataValueField, string dataTextField) { _items = items; _dataKeyField = dataKeyField; _dataValueField = dataValueField; _dataTextField = dataTextField; } public List<CascadingListItem> GetListItems() { var listItems = new List<CascadingListItem>(); foreach (var item in _items) { var key = DataBinder.GetPropertyValue(item, _dataKeyField).ToString(); var value = DataBinder.GetPropertyValue(item, _dataValueField).ToString(); var text = DataBinder.GetPropertyValue(item, _dataTextField).ToString(); listItems.Add(new CascadingListItem(key, value, text)); } return listItems; } } public class CascadingListItem { public CascadingListItem(string key, string value, string text) { this.Key = key; this.Value = value; this.Text = text; } public string Key { get; set; } public string Value { get; set; } public string Text { get; set; } } but when i run the aaplication it gives me following error: Server Error in '/' Application. The parameters dictionary contains a null entry for parameter 'Models' of non-nullable type 'System.Int32' for method 'System.Web.Mvc.ActionResult AddSubCategoryPage(Int32, System.String, System.String)' in 'CMS.Controllers.HomeController'. An optional parameter must be a reference type, a nullable type, or be declared as an optional parameter. Parameter name: parameters . plz help me.

Read the article

Deployment Workbench no longer available after PXE boot

- by Patrick

Our build process revolves around windows Deployment Workbench. Unfortunately this was setup by someone who is no longer with the company, and no-one has ever dared/needed to make any changes. The other day it stopped working. It turns out that one of our build guys started thinking about changing some stuff in it, clicked something and now it no longer works (He is saying now that he right clicked on the 'LAB' entry in 'Deployment points' and hit 'Update', which took some time to run through apparently). The job has fallen on me to resolve and frankly I'm not sure what I'm doing. I was wondering if someone with more experience than me can provide some pointers as to troubleshooting cos I'm feeling quite a lot in the dark here. On the server I have Deployment Workbench up and running (MMC snapin) version 3.0. There is a WDS service that appears to be running ok, as does the tFTPd service. Nothing specific to this in event logs. From the client side; PXE boot works and gets you to the Win PE launch, and it has the correct company logo as the background (proving to me that its loading win PE from the network). WPEINIT runs, and asks for domain credentials, here the team simply put User/Pass/Domain in the boxes and click ok. Normally the build would kick off. Instead they get an error message saying that the \NATBLU01\Distribution$ share isn't available. Checking \NATBLU01\Distribution$ shows that its there and accessible over the network. Security/permissions seem ok, even 'ANONYMOUS LOGON' has read access to that share so I don't see that being a problem. Digging the trace files from C:\MININT\SMSOSD\OSDLOGS\ after an attempt to run the build I can see an error saying much the same - <![LOG[Validating connection to \\NATBLU01\Distribution$]LOG]!><time="16:42:14.000+000" date="03-15-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[FindFile: The file OSDConnectToUNC.exe could not be found in any standard locations.]LOG]!><time="16:42:14.000+000" date="03-15-2012" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> <![LOG[The network location cannot be reached. For information about network troubleshooting, see Windows Help.]LOG]!><time="16:42:24.000+000" date="03-15-2012" component="LiteTouch" context="" type="3" thread="" file="LiteTouch"> <![LOG[ERROR - Unable to map a network drive to \\NATBLU01\Distribution$.]LOG]!><time="16:42:24.000+000" date="03-15-2012" component="LiteTouch" context="" type="3" thread="" file="LiteTouch"> BDD.LOG shows much the same. Full copies of the .LOG files can both files be found here : BDD.LOG LITETOUCH.LOG I can get to a command prompt from the Win PE that boots from PXE, however there isn't any network stuff there. IPCONFIG returns nothing so none of the tests I would usually run resolve anything. I'm at a loss frankly. I did wonder if I could perhaps start a new build process but if the change to the DeploymentWorkbench has knocked it offline I don't think I'm going to be able to create a new deployment. Failing that; we do have a deployment point labeled type 'Media' which appears to be a DVD ISO image of one of the builds, but its dated 2008, is it possible to export the network build to .ISO and build from DVD? We are looking at new hardware to run this from anyway (for the impending Windows 7 roll out) so a temporary work round isn't going to be too much of a problem. All assistance is appreciated! EDIT : OK. Got it working again. Solution was close to Newmanth's idea. The problem was that our PE image didn't appear to be connecting the network. I had an older copy of the PE boot.WIM on a stick that I had been using for other purposes. I booted that and correctly got a network connection. Showed a correct internal IP and could ping out etc etc. However I was still getting the same errors in all the logs and in when wpeinit was running. What I did seperately was to update the PE image that DeploymentWorkbench was pushing out to display a different back ground. I wanted to prove that I was working in the correct place. Turns out that I wasn't. I went and looked at the other deployment stuff we had on this machine, Windows Deployment Services was installed and although all the install images are off line the boot image was online, so I uploaded the copy from my stick to that. Booted straight off. And fixed. Working. Yay! For anyone stumbling across this in the future you may find that although your deployment images are located in the DeploymentWorkbench, the Win PE boot image you are launching from is located in the associated Windows Deployment Services images.

Read the article

Running out of memory with UIImage creation on an offscreen Bitmap Context by NSOperation

- by sigsegv

I have an app with multiple UIView subclasses that acts as pages for a UIScrollView. UIViews are moved back and forth to provide a seamless experience to the user. Since the content of the views is rather slow to draw, it's rendered on a single shared CGBitmapContext guarded by locks by NSOperation subclasses - executed one at once in an NSOperationQueue - wrapped up in an UIImage and then used by the main thread to update the content of the views. -(void)main { NSAutoreleasePool * pool = [[NSAutoreleasePool alloc]init]; if([self isCancelled]) { return; } if(nil == data) { return; } // Buffer is the shared instance of a CG Bitmap Context wrapper class // data is a dictionary CGImageRef img = [buffer imageCreateWithData:data]; UIImage * image = [[UIImage alloc]initWithCGImage:img]; CGImageRelease(img); if([self isCancelled]) { [image release]; return; } NSDictionary * result = [[NSDictionary alloc]initWithObjectsAndKeys:image,@"image",id,@"id",nil]; // target is the instance of the UIView subclass that will use // the image [target performSelectorOnMainThread:@selector(updateContentWithData:) withObject:result waitUntilDone:NO]; [result release]; [image release]; [pool release]; } The updateContentWithData: of the UIView subclass performed on the main thread is just as simple -(void)updateContentWithData:(NSDictionary *)someData { NSDictionary * data = [someData retain]; if([[data valueForKey:@"id"]isEqualToString:[self pendingRequestId]]) { UIImage * image = [data valueForKey:@"image"]; [self setCurrentImage:image]; [self setNeedsDisplay]; } // If the image has not been retained, it should be released together // with the dictionary retaining it [data release]; } The drawLayer:inContext: method of the subclass will just get the CGImage from the UIImage and use it to update the backing layer or part of it. No retain or release is involved in the process. The problem is that after a while I run out of memory. The number of the UIViews is static. CGImageRef and UIImage are created, retained and released correctly (or so it seems to me). Instruments does not show any leaks, just the free memory available dip constantly, rise a few times, and then dip even lower until the application is terminated. The app cycles through about 2-300 of the aforementioned pages before that, but I would expect to have the memory usage reach a more or less stable level of used memory after a bunch of pages have been already skimmed at fast speed or, since the images are up to 3MB in size, deplete way earlier. Any suggestion will be greatly appreciated.

Read the article

BugZilla XML RPC Interface

- by Damo

I am attempting to setup BugZilla to receive but reports from another system using the XML-RPC interface. BugZilla works fine on its own with its own interface. When I attempt to test the XML-RPC functionality by accessing "xmlrpc.cgi" in my browser I get the error: The XML-RPC Interface feature is not available in this Bugzilla at C:\BugZilla\xmlrpc.cgi line 27 main::BEGIN(...) called at C:\BugZilla\xmlrpc.cgi line 29 eval {...} called at C:\BugZilla\xmlrpc.cgi line 29 Following this I install test-taint package from the default perl repository, this installs version 1.04. Re-running "xmlrpc.cgi" gives me an IIS error: 502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server. So I run the checksetup.pl which inform me that: Use of uninitialized value in open at C:/Perl/site/lib/Test/Taint.pm line 334, <DATA> line 558. Installing Test-Taint from CPAN is the same. I assume XML-RPC is relent on Test-Taint, but Test-Taint doesn't seem to run correctly. If I ignore this error and attempt to invoke "bz_webservice_demo.pl" to add an entry the script times out. How can I get the XML-RPC / Test-Taint function working ? Current Setup: IIS7.5 on Windows Server 2008 Bugzilla 4.2.2 Perl 5.14.2 C:\BugZilla>perl checksetup.pl Set up gcc environment - 3.4.5 (mingw-vista special r3) * This is Bugzilla 4.2.2 on perl 5.14.2 * Running on Win2008 Build 6002 (Service Pack 2) Checking perl modules... Checking for CGI.pm (v3.51) ok: found v3.59 Checking for Digest-SHA (any) ok: found v5.62 Checking for TimeDate (v2.21) ok: found v2.24 Checking for DateTime (v0.28) ok: found v0.76 Checking for DateTime-TimeZone (v0.79) ok: found v1.48 Checking for DBI (v1.614) ok: found v1.622 Checking for Template-Toolkit (v2.22) ok: found v2.24 Checking for Email-Send (v2.16) ok: found v2.198 Checking for Email-MIME (v1.904) ok: found v1.911 Checking for URI (v1.37) ok: found v1.59 Checking for List-MoreUtils (v0.22) ok: found v0.33 Checking for Math-Random-ISAAC (v1.0.1) ok: found v1.004 Checking for Win32 (v0.35) ok: found v0.44 Checking for Win32-API (v0.55) ok: found v0.64 Checking available perl DBD modules... Checking for DBD-Pg (v1.45) ok: found v2.18.1 Checking for DBD-mysql (v4.001) ok: found v4.021 Checking for DBD-SQLite (v1.29) ok: found v1.33 Checking for DBD-Oracle (v1.19) ok: found v1.30 The following Perl modules are optional: Checking for GD (v1.20) ok: found v2.46 Checking for Chart (v2.1) ok: found v2.4.5 Checking for Template-GD (any) ok: found v1.56 Checking for GDTextUtil (any) ok: found v0.86 Checking for GDGraph (any) ok: found v1.44 Checking for MIME-tools (v5.406) ok: found v5.503 Checking for libwww-perl (any) ok: found v6.02 Checking for XML-Twig (any) ok: found v3.41 Checking for PatchReader (v0.9.6) ok: found v0.9.6 Checking for perl-ldap (any) ok: found v0.44 Checking for Authen-SASL (any) ok: found v2.15 Checking for RadiusPerl (any) ok: found v0.20 Checking for SOAP-Lite (v0.712) ok: found v0.715 Checking for JSON-RPC (any) ok: found v0.96 Checking for JSON-XS (v2.0) ok: found v2.32 Use of uninitialized value in open at C:/Perl/site/lib/Test/Taint.pm line 334, <DATA> line 558. Checking for Test-Taint (any) ok: found v1.04 Checking for HTML-Parser (v3.67) ok: found v3.68 Checking for HTML-Scrubber (any) ok: found v0.09 Checking for Encode (v2.21) ok: found v2.44 Checking for Encode-Detect (any) not found Checking for Email-MIME-Attachment-Stripper (any) ok: found v1.316 Checking for Email-Reply (any) ok: found v1.202 Checking for TheSchwartz (any) not found Checking for Daemon-Generic (any) not found Checking for mod_perl (v1.999022) not found Checking for Apache-SizeLimit (v0.96) not found *********************************************************************** * OPTIONAL MODULES * *********************************************************************** * Certain Perl modules are not required by Bugzilla, but by * * installing the latest version you gain access to additional * * features. * * * * The optional modules you do not have installed are listed below, * * with the name of the feature they enable. Below that table are the * * commands to install each module. * *********************************************************************** * MODULE NAME * ENABLES FEATURE(S) * *********************************************************************** * Encode-Detect * Automatic charset detection for text attachments * * TheSchwartz * Mail Queueing * * Daemon-Generic * Mail Queueing * * mod_perl * mod_perl * * Apache-SizeLimit * mod_perl * *********************************************************************** COMMANDS TO INSTALL OPTIONAL MODULES: Encode-Detect: ppm install Encode-Detect TheSchwartz: ppm install TheSchwartz Daemon-Generic: ppm install Daemon-Generic mod_perl: ppm install mod_perl Apache-SizeLimit: ppm install Apache-SizeLimit Reading ./localconfig... OPTIONAL NOTE: If you want to be able to use the 'difference between two patches' feature of Bugzilla (which requires the PatchReader Perl module as well), you should install patchutils from: http://cyberelk.net/tim/patchutils/ Checking for DBD-mysql (v4.001) ok: found v4.021 Checking for MySQL (v5.0.15) ok: found v5.5.27 WARNING: You need to set the max_allowed_packet parameter in your MySQL configuration to at least 3276750. Currently it is set to 3275776. You can set this parameter in the [mysqld] section of your MySQL configuration file. Removing existing compiled templates... Precompiling templates...done. checksetup.pl complete.

Read the article

Silverlight with MVVM Inheritance: ModelView and View matching the Model

- by moonground.de

Hello Stackoverflowers! :) Today I have a special question on Silverlight (4 RC) MVVM and inheritance concepts and looking for a best practice solution... I think that i understand the basic idea and concepts behind MVVM. My Model doesn't know anything about the ViewModel as the ViewModel itself doesn't know about the View. The ViewModel knows the Model and the Views know the ViewModels. Imagine the following basic (example) scenario (I'm trying to keep anything short and simple): My Model contains a ProductBase class with a few basic properties, a SimpleProduct : ProductBase adding a few more Properties and ExtendedProduct : ProductBase adding another properties. According to this Model I have several ViewModels, most essential SimpleProductViewModel : ViewModelBase and ExtendedProductViewModel : ViewModelBase. Last but not least, according Views SimpleProductView and ExtendedProductView. In future, I might add many product types (and matching Views + VMs). 1. How do i know which ViewModel to create when receiving a Model collection? After calling my data provider method, it will finally end up having a List<ProductBase>. It containts, for example, one SimpleProduct and two ExtendedProducts. How can I transform the results to an ObservableCollection<ViewModelBase> having the proper ViewModel types (one SimpleProductViewModel and two ExtendedProductViewModels) in it? I might check for Model type and construct the ViewModel accordingly, i.e. foreach(ProductBase currentProductBase in resultList) if (currentProductBase is SimpleProduct) viewModels.Add( new SimpleProductViewModel((SimpleProduct)currentProductBase)); else if (currentProductBase is ExtendedProduct) viewModels.Add( new ExtendedProductViewModels((ExtendedProduct)currentProductBase)); ... } ...but I consider this very bad practice as this code doesn't follow the object oriented design. The other way round, providing abstract Factory methods would reduce the code to: foreach(ProductBase currentProductBase in resultList) viewModels.Add(currentProductBase.CreateViewModel()) and would be perfectly extensible but since the Model doesn't know the ViewModels, that's not possible. I might bring interfaces into game here, but I haven't seen such approach proven yet. 2. How do i know which View to display when selecting a ViewModel? This is pretty the same problem, but on a higher level. Ended up finally having the desired ObservableCollection<ViewModelBase> collection would require the main view to choose a matching View for the ViewModel. In WPF, there is a DataTemplate concept which can supply a View upon a defined DataType. Unfortunately, this doesn't work in Silverlight and the only replacement I've found was the ResourceSelector of the SLExtensions toolkit which is buggy and not satisfying. Beside that, all problems from Question 1 apply as well. Do you have some hints or even a solution for the problems I describe, which you hopefully can understand from my explanation? Thank you in advance! Thomas

Read the article

How to use a nested form for multiple models in one form?

- by Magicked

I'm struggling to come up with the proper way to design a form that will allow me to input data for two different models. The form is for an 'Incident', which has the following relationships: belongs_to :customer belongs_to :user has_one :incident_status has_many :incident_notes accepts_nested_attributes_for :incident_notes, :allow_destroy => false So an incident is assigned to a 'Customer' and a 'User', and the user is able to add 'Notes' to the incident. I'm having trouble with the notes part of the form. Here how the form is being submitted: {"commit"=>"Create", "authenticity_token"=>"ECH5Ziv7JAuzs53kt5m/njT9w39UJhfJEs2x0Ms2NA0=", "customer_id"=>"4", "incident"=>{"title"=>"Something bad", "incident_status_id"=>"2", "user_id"=>"2", "other_id"=>"AAA01-042310-001", "incident_note"=>{"note"=>"This is a note"}}} It appears to be attempting to add the incident_note as a field under 'Incident', rather than creating a new entry in the incident_note table with an incident_id foreign key linking back to the incident. Here is the 'IncidentNote' model: belongs_to :incident belongs_to :user Here is the form for 'Incident': <% form_for([@customer,@incident]) do |f| %> <%= f.error_messages %> <p> <%= f.label :other_id, "ID" %><br /> <%= f.text_field :capc_id %> </p> <p> <%= f.label :title %><br /> <%= f.text_field :title %> </p> <p> <%= label_tag 'user', 'Assign to user?' %> <%= f.select :user_id, @users.collect {|u| [u.name, u.id]} %> </p> <p> <%= f.label :incident_status, 'Status?' %> <%= f.select :incident_status_id, @statuses.collect {|s| [s.name, s.id]} %> </p> <p> <% f.fields_for :incident_note do |inote_form| %> <%= inote_form.label :note, 'Add a Note' %> <%= inote_form.text_area :note, :cols => 40, :rows => 20 %> <% end %> </p> <p> <%= f.submit "Create" %> </p> <% end %> And finally, here are the incident_controller entries for New and Create. New: def new @customer = current_user.customer @incident = Incident.new @users = @customer.users @statuses = IncidentStatus.find(:all) @incident_note = IncidentNote.new respond_to do |format| format.html # new.html.erb format.xml { render :xml => @incident } end end Create: def create @users = @customer.users @statuses = IncidentStatus.find(:all) @incident = Incident.new(params[:incident]) @incident.customer = @customer @incident_note = @incident.incident_note.build(params[:incident_note]) @incident_note.user = current_user respond_to do |format| if @incident.save flash[:notice] = 'Incident was successfully created.' format.html { redirect_to(@incident) } format.xml { render :xml => @incident, :status => :created, :location => @incident } else format.html { render :action => "new" } format.xml { render :xml => @incident.errors, :status => :unprocessable_entity } end end end I'm not really sure where to look at this point. I'm sure it's just a limitation of my current Rails skill (I don't know much). So if anyone can point me in the right direction I would be very appreciative. Please let me know if more information is needed! Thanks!

Read the article

Problem with return 2 libc method

- by jth

Hi, I'am trying to understand the return2libc method. I'am using an ubuntu linux 9.10, 32 bit with ASLR disabled. In theory, it sounds quite easy, overwrite the saved eip with the address of system() (or whatever function you want), then put the address to which system() should return and after that, the parameter for system, the "/bin/bash"-string. But what happens is that my exploit keeps segfaulting the vulnerable program. I assume something with the system()-address went wrong. This is what I did so far: Determined the address of system(): (gdb) print system $1 = {<text variable, no debug info>} 0x167020 <system> (gdb) x/x system 0x167020 <system>: 0x890cec83 I used the subsequent x/x system because those 3 bytes returned by print system looks like an index in some sort of jumptable (PLT?), so I assume 0x890cec83 is the right address which is used to overwrite the saved eip. After that I determined the address of the /bin/bash string in memory, using a small C program which basically consists of this line: printf("Address of string /bin/bash: %p\n", getenv("SHELL")); Then I looked a little bit around in the memory and fount /bin/bash: (gdb) x/s 0xbffff6ca 0xbffff6ca: "/bin/bash" After I gathered this information, I filled the buffer: (gdb) b 9 Breakpoint 1 at 0x8048407: file victim.c, line 9. (gdb) r `perl -e 'print "A"x9 . "\x83\xec\x0c\x89FAKE\xca\f6\ff\bf";'` Breakpoint 1, main (argc=1111638594, argv=0xc360cca) at victim.c:10 10 return 0; (gdb) x/s 0xbffff6ca 0xbffff6ca: "/bin/bash" Stack frame looks like this: (gdb) i f Stack level 0, frame at 0xbffff440: eip = 0x8048407 in main (victim.c:10); saved eip 0x890cec83 source language c. Arglist at 0xbffff438, args: argc=1111638594, argv=0xc360cca Locals at 0xbffff438, Previous frame's sp is 0xbffff440 Saved registers: ebp at 0xbffff438, eip at 0xbffff43c This seems all right to me, saved eip was overwritten with the (hopefully) correct system()-address, return address for system was set to "FAKE" (shouldn't matter) and the address of /bin/bash also seems to be correct. When I'am continuing the execution, victim segfaults on some strange address and certainly not in 0x890cec83: (gdb) cont Continuing. Program received signal SIGSEGV, Segmentation fault. 0x0804840d in main (argc=Cannot access memory at address 0x41414149 ) at victim.c:11 11 } Has anyone an explanation or a hint what happens here and why the execution isn't redirected to 0x890cec83? Thanks in advance, any hint, and be it only vague, would be appreciated. I have no idea why this doesn't work.

Read the article

Can I create a custom class that inherits from a strongly typed DataRow?

- by Calvin Fisher

I'm working on a huge, old project with a lot of brittle code, some of which has been around since the .NET 1.0 era, and it has been and will be worked on by other people... so I'd like to change as little as possible. I have one project in my solution that contains DataSet.xsd. This project compiles to a separate assembly (Data.dll). The database schema includes several tables arranged more or less hierarchically, but the only way the tables are actually linked together is through joins. I can get, e.g. DepartmentRow and EmployeeRow objects from the autogenerated code. EmployeeRow contains information from the employee's corresponding DepartmentRow through a join. I'm making a new report to view multiple departments and all their employees. If I use the existing data access scheme, all I will be able to get is a spreadsheet-like output where each employee is represented on one line, with department information repeated over and over in its appropriate columns. E.g.: Department1...Employee1... Department1...Employee2... Department2...Employee3... But what the customer would like is to have each department render like a heading, with a list of employees beneath each. E.g.: - Department1... Employee1... Employee2... + Department2... I'm trying to do this by inheriting hierarchical objects from the autogenerated Row objects. E.g.: public class Department : DataSet.DepartmentRow { public List<Employee> Employees; } That way I could nest the data in the report by using a collection of Department objects as the DataSource, each of which will put its list of Employees in a subreport. The problem is that this gives me a The type Data.DataSet.DepartmentRow has no constructors defined error. And when I try to make a constructor, e.g. public class Department : DataSet.DepartmentRow { private Department() { } public List<Employee> Employees; } I get a 'Data.DataSet.DepartmentRow(System.Data.DataRowBuilder)' is inaccessible due to its protection level. error in addition to the first one. Is there a way to accomplish what I'm trying to do? Or is there something else I should be trying entirely?

Read the article

Execute SQL SP in Excel VBA

- by TheOCD

HI I am having problem with getting all the columns back when i execute following code in excel vba. I only get 6 out of 23 columns back. Connection, command etc works fine (i can see exec command in the SQL Profiler), data headers are created for all 23 columns but i only get data for 6 column. Side Note: it's not prod level code, have missed out error handling on purpose, sp works fine in SQL management studio, ASP.Net, C# win form app, it is for Excel 2003 connecting to SQL 2008. Can someone help me troubleshoot it? Dim connection As ADODB.connection Dim recordset As ADODB.recordset Dim command As ADODB.command Dim strProcName As String 'Stored Procedure name Dim strConn As String ' connection string. Dim selectedVal As String 'Set ADODB requirements Set connection = New ADODB.connection Set recordset = New ADODB.recordset Set command = New ADODB.command If Workbooks("Book2.xls").MultiUserEditing = True Then MsgBox "You do not have Exclusive access to the workbook at this time." & _ vbNewLine & "Please have all other users close the workbook and then try again.", vbOKOnly + vbExclamation Exit Sub Else On Error Resume Next ActiveWorkbook.ExclusiveAccess 'On Error GoTo No_Bugs End If 'set the active sheet Set oSht = Workbooks("Book2.xls").Sheets(1) 'get the connection string, if empty just exit strConn = ConnectionString() If strConn = "" Then Exit Sub End If ' selected value, if <NOTHING> just exit selectedVal = selectedValue() If selectedVal = "<NOTHING>" Then Exit Sub End If If Not oSht Is Nothing Then 'Open database connection connection.ConnectionString = strConn connection.Open ' set command stuff. command.ActiveConnection = connection command.CommandText = "GetAlbumByName" command.CommandType = adCmdStoredProc command.Parameters.Refresh command.Parameters(1).Value = selectedVal 'Execute stored procedure and return to a recordset Set recordset = command.Execute() If recordset.BOF = False And recordset.EOF = False Then Sheets("Sheet2").[A1].CopyFromRecordset recordset ' Create headers and copy data With Sheets("Sheet2") For Column = 0 To recordset.Fields.Count - 1 .Cells(1, Column + 1).Value = recordset.Fields(Column).Name Next .Range(.Cells(1, 1), .Cells(1, recordset.Fields.Count)).Font.Bold = True .Cells(2, 1).CopyFromRecordset recordset End With Else MsgBox "b4 BOF or after EOF.", vbOKOnly + vbExclamation End If 'Close database connection and clean up If CBool(recordset.State And adStateOpen) = True Then recordset.Close Set recordset = Nothing If CBool(connection.State And adStateOpen) = True Then connection.Close Set connection = Nothing Else MsgBox "oSheet2 is Nothing.", vbOKOnly + vbExclamation End If

Read the article

gcc/g++: error when compiling large file

- by Alexander

Hi, I have a auto-generated C++ source file, around 40 MB in size. It largely consists of push_back commands for some vectors and string constants that shall be pushed. When I try to compile this file, g++ exits and says that it couldn't reserve enough virtual memory (around 3 GB). Googling this problem, I found that using the command line switches --param ggc-min-expand=0 --param ggc-min-heapsize=4096 may solve the problem. They, however, only seem to work when optimization is turned on. 1) Is this really the solution that I am looking for? 2) Or is there a faster, better (compiling takes ages with these options acitvated) way to do this? Best wishes, Alexander Update: Thanks for all the good ideas. I tried most of them. Using an array instead of several push_back() operations reduced memory usage, but as the file that I was trying to compile was so big, it still crashed, only later. In a way, this behaviour is really interesting, as there is not much to optimize in such a setting -- what does the GCC do behind the scenes that costs so much memory? (I compiled with deactivating all optimizations as well and got the same results) The solution that I switched to now is reading in the original data from a binary object file that I created from the original file using objcopy. This is what I originally did not want to do, because creating the data structures in a higher-level language (in this case Perl) was more convenient than having to do this in C++. However, getting this running under Win32 was more complicated than expected. objcopy seems to generate files in the ELF format, and it seems that some of the problems I had disappeared when I manually set the output format to pe-i386. The symbols in the object file are by standard named after the file name, e.g. converting the file inbuilt_training_data.bin would result in these two symbols: binary_inbuilt_training_data_bin_start and binary_inbuilt_training_data_bin_end. I found some tutorials on the web which claim that these symbols should be declared as extern char _binary_inbuilt_training_data_bin_start;, but this does not seem to be right -- only extern char binary_inbuilt_training_data_bin_start; worked for me.

Read the article

Recursive N-way merge/diff algorithm for directory trees?

- by BobMcGee

What algorithms or Java libraries are available to do N-way, recursive diff/merge of directories? I need to be able to generate a list of folder trees that have many identical files, and have subdirectories with many similar files. I want to be able to use 2-way merge operations to quickly remove as much redundancy as possible. Goals: Find pairs of directories that have many similar files between them. Generate short list of directory pairs that can be synchronized with 2-way merge to eliminate duplicates Should operate recursively (there may be nested duplicates of higher-level directories) Run time and storage should be O(n log n) in numbers of directories and files Should be able to use an embedded DB or page to disk for processing more files than fit in memory (100,000+). Optional: generate an ancestry and change-set between folders Optional: sort the merge operations by how many duplicates they can elliminate I know how to use hashes to find duplicate files in roughly O(n) space, but I'm at a loss for how to go from this to finding partially overlapping sets between folders and their children. EDIT: some clarification The tricky part is the difference between "exact same" contents (otherwise hashing file hashes would work) and "similar" (which will not). Basically, I want to feed this algorithm at a set of directories and have it return a set of 2-way merge operations I can perform in order to reduce duplicates as much as possible with as few conflicts possible. It's effectively constructing an ancestry tree showing which folders are derived from each other. The end goal is to let me incorporate a bunch of different folders into one common tree. For example, I may have a folder holding programming projects, and then copy some of its contents to another computer to work on it. Then I might back up and intermediate version to flash drive. Except I may have 8 or 10 different versions, with slightly different organizational structures or folder names. I need to be able to merge them one step at a time, so I can chose how to incorporate changes at each step of the way. This is actually more or less what I intend to do with my utility (bring together a bunch of scattered backups from different points in time). I figure if I can do it right I may as well release it as a small open source util. I think the same tricks might be useful for comparing XML trees though.

Read the article

Why does this valid Tkinter code crash when mixed with a bit of PyWin32?

- by Erlog

So I'm making a very small program for personal use in tkinter, and I've run into a really strange wall. I'm mixing tkinter with the pywin32 bindings because I really hate everything to do with the syntax and naming conventions of pywin32, and it feels like tkinter gets more done with far less code. The strangeness is happening in the transition between the pywin32 clipboard watching and my program's reaction to it in tkinter. My window and all its controls are being handled in tkinter. The pywin32 bindings are doing clipboard watching and clipboard access when the clipboard changes. From what I've gathered about the way the clipboard watching pieces of pywin32 work, you can make it work with anything you want as long as you provide pywin32 with the hwnd value of your window. I'm doing that part, and it works when the program first starts. It just doesn't seem to work when the clipboard changes. When the program launches, it grabs the clipboard and puts it into the search box and edit box just fine. When the clipboard is modified, the event I want to fire off is firing off...except that event that totally worked before when the program launched is now causing a weird hang instead of doing what it's supposed to do. I can print the clipboard contents to stdout all I want if the clipboard changes, but not put that same data into a tkinter widget. It only hangs like that if it starts to interact with any of my tkinter widgets after being fired off by a clipboard change notification. It feels like there's some pywin32 etiquette I've missed in adapting the clipboard-watching sample code I was using over to my tkinter-using program. Tkinter apparently doesn't like to produce stack traces or error messages, and I can't really even begin to know what to look for trying to debug it with pdb. Here's the code: #coding: utf-8 #Clipboard watching cribbed from ## {{{ http://code.activestate.com/recipes/355593/ (r1) import pdb from Tkinter import * import win32clipboard import win32api import win32gui import win32con import win32clipboard def force_unicode(object, encoding="utf-8"): if isinstance(object, basestring) and not isinstance(object, unicode): object = unicode(object, encoding) return object class Application(Frame): def __init__(self, master=None): self.master = master Frame.__init__(self, master) self.pack() self.createWidgets() self.hwnd = self.winfo_id() self.nextWnd = None self.first = True self.oldWndProc = win32gui.SetWindowLong(self.hwnd, win32con.GWL_WNDPROC, self.MyWndProc) try: self.nextWnd = win32clipboard.SetClipboardViewer(self.hwnd) except win32api.error: if win32api.GetLastError () == 0: # information that there is no other window in chain pass else: raise self.update_search_box() self.word_search() def word_search(self): #pdb.set_trace() term = self.searchbox.get() self.resultsbox.insert(END, term) def update_search_box(self): clipboardtext = "" if win32clipboard.IsClipboardFormatAvailable(win32clipboard.CF_TEXT): win32clipboard.OpenClipboard() clipboardtext = win32clipboard.GetClipboardData() win32clipboard.CloseClipboard() if clipboardtext != "": self.searchbox.delete(0,END) clipboardtext = force_unicode(clipboardtext) self.searchbox.insert(0, clipboardtext) def createWidgets(self): self.button = Button(self) self.button["text"] = "Search" self.button["command"] = self.word_search self.searchbox = Entry(self) self.resultsbox = Text(self) #Pack everything down here for "easy" layout changes later self.searchbox.pack() self.button.pack() self.resultsbox.pack() def MyWndProc (self, hWnd, msg, wParam, lParam): if msg == win32con.WM_CHANGECBCHAIN: self.OnChangeCBChain(msg, wParam, lParam) elif msg == win32con.WM_DRAWCLIPBOARD: self.OnDrawClipboard(msg, wParam, lParam) # Restore the old WndProc. Notice the use of win32api # instead of win32gui here. This is to avoid an error due to # not passing a callable object. if msg == win32con.WM_DESTROY: if self.nextWnd: win32clipboard.ChangeClipboardChain (self.hwnd, self.nextWnd) else: win32clipboard.ChangeClipboardChain (self.hwnd, 0) win32api.SetWindowLong(self.hwnd, win32con.GWL_WNDPROC, self.oldWndProc) # Pass all messages (in this case, yours may be different) on # to the original WndProc return win32gui.CallWindowProc(self.oldWndProc, hWnd, msg, wParam, lParam) def OnChangeCBChain (self, msg, wParam, lParam): if self.nextWnd == wParam: # repair the chain self.nextWnd = lParam if self.nextWnd: # pass the message to the next window in chain win32api.SendMessage (self.nextWnd, msg, wParam, lParam) def OnDrawClipboard (self, msg, wParam, lParam): if self.first: self.first = False else: #print "changed" self.word_search() #self.word_search() if self.nextWnd: # pass the message to the next window in chain win32api.SendMessage(self.nextWnd, msg, wParam, lParam) if __name__ == "__main__": root = Tk() app = Application(master=root) app.mainloop() root.destroy()

Read the article

I'm trying to handle the updates on 2 related tables in one DetailsView using Jquery and Linq, and h

- by Ben Reisner

Given two related tables (reports, report_fields) where there can be many report_fields entries for each reports entry, I need to allow the user to enter new report_fields, delete existing report_fields, and re-arrange the order. Currently I am using a DetailsView to handle the editing of the reports. I added some logic to handle report_fields, and currently it allows you to succesfully re-arrange the order, but i'm a little stumped as to the best way to add new items, or delete existing items. The basic logic I have is that each report_fields is represented by a . It has a description as the text, and a field for each field in the report_fields table. I use JQuery Sortable to allow the user to re-arrange the LIs. Abbreviated Create Table Statements:(foreign key constraint ignored for brevity) create table report( id integer primary key identity, reportname varchar(250) ) create table report_fields( id integer primary key identity, reportID integer, keyname integer, keyvalue integer, field_order integer ) My abbreviated markup: <asp:DetailsView ...> ... <asp:TemplateField HeaderText="Fields"> <EditItemTemplate> <ul class="MySortable"> <asp:Repeater ID="Repeater1" runat="server" DataSource='<%# Eval("report_fields") %>'> <ItemTemplate> <li> <%# Eval("keyname") %>: <%# Eval("keyvalue") %> <input type="hidden" name="keyname[]" value='<%# Eval("keyname") %>' /> <input type="hidden" name="keyvalue[]" value='<%# Eval("keyvalue") %>' /> </li> </ItemTemplate> </asp:Repeater> </ul> </EditItemTemplate> </asp:TemplateField> </asp:DetailsView> <asp:LinqDataSource ID="LinqDataSource2" onupdating="LinqDataSource2_Updating" table=reports ... /> $(function() { $(".MySortable").sortable({ placeholder: 'MySortable-highlight' }).disableSelection(); }); Code Behind Class: public partial class Administration_AddEditReport protected void LinqDataSource2_Updating(object sender, LinqDataSourceUpdateEventArgs e) { report r = (report)e.NewObject; MyDataContext dc = new MyDataContext(); var fields = from f in dc.report_fields where f.reportID == r.id select f; dc.report_fields.DeleteAllOnSubmit(fields); NameValueCollection nvc = Request.Params; string[] keyname = nvc["keyname[]"].Split(','); string[] keyvalue = nvc["keyvalue[]"].Split(','); for (int i = 0; i < keyname.Length; i++) { report_field rf = new report_field(); rf.reportID = r.id; rf.keyname = keyname[i]; rf.keyvalue = keyvalue[i]; rf.field_order = i; dc.report_fields.InsertOnSubmit(rf); } dc.SubmitChanges(); } }

Read the article

Pulling record from mySQL database only working for userid and not email

- by user2908467

This function works because I search by userid: private void showList_Click(object sender, EventArgs e) { int id = 0; for (int i = 0; i <= sqlClient.Count("UserList"); i++) { Dictionary<string, string> dik = sqlClient.Select("UserList", "userid = " + id); var lines = dik.Select(kv => kv.Key + ": " + kv.Value.ToString()); userList.AppendText(string.Join(Environment.NewLine, lines)); userList.AppendText(Environment.NewLine); userList.AppendText("--------------------------------------"); id++; } } This function does not work because I search by email: private void login_Click(object sender, EventArgs e) { string email = lemail.Text; Dictionary<string, string> dik = sqlClient.Select("UserList", "firstname = " + email); var lines = dik.Select(kv => kv.Key + ": " + kv.Value.ToString()); logged.AppendText(string.Join(Environment.NewLine, lines)); } This is the error message I receive when I click on the login button: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '@aol.com' at line 1 The email I searched for in the database was "[email protected]" without quotes. I'm lead to believe by the error message the @ sign is causing conflict as I know it is a special character but I am having a hard time figuring out what phrase to search for to help me. Also, here is the function that is being called: public Dictionary<string, string> Select(string table, string WHERE) { //This methods selects from the database, it retrieves data from it. //You must make a dictionary to use this since it both saves the column //and the value. i.e. "age" and "33" so you can easily search for values. //Example: SELECT * FROM names WHERE name='John Smith' // This example would retrieve all data about the entry with the name "John Smith" //Code = Dictionary<string, string> myDictionary = Select("names", "name='John Smith'"); //This code creates a dictionary and fills it with info from the database. string query = "SELECT * FROM " + table + " WHERE " + WHERE + ""; Dictionary<string, string> selectResult = new Dictionary<string, string>(); if (this.Open()) { MySqlCommand cmd = new MySqlCommand(query, conn); MySqlDataReader dataReader = cmd.ExecuteReader(); try { while (dataReader.Read()) { for (int i = 0; i < dataReader.FieldCount; i++) { selectResult.Add(dataReader.GetName(i).ToString(), dataReader.GetValue(i).ToString()); } } dataReader.Close(); } catch { } this.Close(); return selectResult; } else { return selectResult; } } My database table is called "UserList" The fields in order are as follows: userid, email, password, lastname, firstname Any help would be greatly appreciated. This site is amazing!

Read the article

Finding underlying cause of Window 7 Account corruption.

- by Carl Jokl

I have been having trouble with my Sister's computer which I built. It is running Windows 7 Ultimate x64. The problem is that I have had problems with the accounts becoming corrupted. First problems manifest themselves in the form of Windows saying the profile failed to be loaded properly and a temporary profile. Eventually the account will not allow login at all. An error message along the lines the authentication service failing the login. I have found information about this problem and how to fix it. The problem being that something has corrupted the account profile and backing up and recreating the accounts fixes the problem. I have been able to fix things and get logins working again but over the period of usually about a week it happens again. Bit by bit the accounts corrupt and then it is back to square one. I am frustrated because I don't know what the underlying cause of the problem is i.e. what is causing the accounts to be corrupted in the first place. At the moment I am just treating the symptoms. I was hoping someone who may have more experience with dealing with this problem might be able to help me find the root cause. Some articles suggest that Norton Internet Security is a big culprit of this problem which is installed. I could try uninstalling Norton and see if it helps. The one thing which is different about this computer to any other I have built is that it has a solid state drive. Actually it has both a hard drive and solid state drive. The documents and settings i.e. the Users directory is stored on the hard drive. This was done following an article about moving the user account data onto a separate drive on Windows 7 which I found on the Internet. Moving the User accounts is more of a pain under Windows 7 and this solution involved creating a low level file system link to the folder from the boot drive (Solid State) to the Hard Drive. The idea is that the computer behaves just as if it is accessing the User's folder from the boot drive but actually the data is stored on the hard drive. This may have nothing to do with the cause of the problem but due to the problem being user account corruption it is a possibility I have not been able to rule out. Any help would be appreciated as I would be glad to see the back of this problem.

Read the article

Normalization of database for timesheet tool and ensure data integrity

- by fireeyedboy

I'm creating a timesheet application. I have the following entities (amongst others): Company Employee = an employee associated with a company Client = a client associated with a company So far I have the following (abbreviated) database setup: Company - id - name Employee - id - companyId (FK to Company.id) - name Client - id - companyId (FK to Company.id) - name Now, I want an employee to be associated with a client, but only if that client is associated with the company the employee works for. How would you guarantee this data integrity on a database level? Or should I just depend on the application to guarantee this data integrity? I thought about creating a many to many table like this: EmployeeClient - employeeId (FK to Employee.id) - companyId \ (combined FK to Client.companyId, Client.id) - clientId / Thus, when I insert a client for an employee along with the employee's company id, the database should prevent this when the client is not associated with the employee's company id. Does this make sense? Because this still doesn't guarantee the employee is associated with the company. How do you deal with these things? UPDATE The scenario is as followed: A company has multiple employees. Employees will only be linked to one company. A company has multiple clients also. Clients will only be linked to one company. (Company is a sandbox, so to speak). An employee of a company can be linked to a client of it's company, but only if the client is part of the company's clientele. In other words: The application will allow a company to create/add employees and create/add clients (hence the companyId FK in the Employee and Client tables). Next, the company will be allowed to assign certain clients to certain of it's employees (EmployeeClient table). Imagine an employee working on projects for a few clients for which s/he can write billable hours, but the employee must not be allowed to write billable hours for clients they are not assigned to by their employer (the company). So, employees will not automatically have access to all their company's clients, but only to those that the company has selected for them. Hopefully this has shed some more light on the matter.

Read the article

Need help configurating my Tomcat server

- by gablin

I just reinstalled my entire server, and now I can't seem to get my JSP-based website to work on Tomcat anymore. I use the same server.xml file, which worked perfectly before the reinstallation, but no longer. Here's the content of the server.xml file which worked before:  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />  <GlobalNamingResources>  <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources>  <Service name="Catalina">    <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" />      <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>        <Host name="www.rebootradio.nu"> <Alias>rebootradio.nu</Alias> <Context path="" docBase="D:/services/http/rebootradio.nu" debug="1" reloadable="true"/> </Host> </Engine> </Service> </Server> The JSP site doesn't use any WAR files or anything like that; there's just a default.jsp in the specified folder D:/services/http/rebootradio.nu which loads the site. As I said, this configuration worked before, but now with the latest verion of XAMPP and Tomcat it doesn't work anymore. All I get is a 404 message saying The requested resource () is not available.

Read the article

Django Multi-Table Inheritance VS Specifying Explicit OneToOne Relationship in Models

- by chefsmart

Hope all this makes sense :) I'll clarify via comments if necessary. Also, I am experimenting using bold text in this question, and will edit it out if I (or you) find it distracting. With that out of the way... Using django.contrib.auth gives us User and Group, among other useful things that I can't do without (like basic messaging). In my app I have several different types of users. A user can be of only one type. That would easily be handled by groups, with a little extra care. However, these different users are related to each other in hierarchies / relationships. Let's take a look at these users: - Principals - "top level" users Administrators - each administrator reports to a Principal Coordinators - each coordinator reports to an Administrator Apart from these there are other user types that are not directly related, but may get related later on. For example, "Company" is another type of user, and can have various "Products", and products may be supervised by a "Coordinator". "Buyer" is another kind of user that may buy products. Now all these users have various other attributes, some of which are common to all types of users and some of which are distinct only to one user type. For example, all types of users have to have an address. On the other hand, only the Principal user belongs to a "BranchOffice". Another point, which was stated above, is that a User can only ever be of one type. The app also needs to keep track of who created and/or modified Principals, Administrators, Coordinators, Companies, Products etc. (So that's two more links to the User model.) In this scenario, is it a good idea to use Django's multi-table inheritance as follows: - from django.contrib.auth.models import User class Principal(User): # # # branchoffice = models.ForeignKey(BranchOffice) landline = models.CharField(blank=True, max_length=20) mobile = models.CharField(blank=True, max_length=20) created_by = models.ForeignKey(User, editable=False, blank=True, related_name="principalcreator") modified_by = models.ForeignKey(User, editable=False, blank=True, related_name="principalmodifier") # # # Or should I go about doing it like this: - class Principal(models.Model): # # # user = models.OneToOneField(User, blank=True) branchoffice = models.ForeignKey(BranchOffice) landline = models.CharField(blank=True, max_length=20) mobile = models.CharField(blank=True, max_length=20) created_by = models.ForeignKey(User, editable=False, blank=True, related_name="principalcreator") modified_by = models.ForeignKey(User, editable=False, blank=True, related_name="principalmodifier") # # # Please keep in mind that there are other user types that are related via foreign keys, for example: - class Administrator(models.Model): # # # principal = models.ForeignKey(Principal, help_text="The supervising principal for this Administrator") user = models.OneToOneField(User, blank=True) province = models.ForeignKey( Province) landline = models.CharField(blank=True, max_length=20) mobile = models.CharField(blank=True, max_length=20) created_by = models.ForeignKey(User, editable=False, blank=True, related_name="administratorcreator") modified_by = models.ForeignKey(User, editable=False, blank=True, related_name="administratormodifier") I am aware that Django does use a one-to-one relationship for multi-table inheritance behind the scenes. I am just not qualified enough to decide which is a more sound approach.

Read the article

Understanding SingleTableEntityPersister n QueryLoader

- by Iapilgrim

Hi, I have the Hibernate model @Cache(usage = CacheConcurrencyStrategy.NONE, region = SitesConstants.CACHE_REGION) public class Node extends StatefulEntity implements Inheritable, Cloneable { private Node _parent; private List<Node> _childNodes; .. } @Cache(usage = CacheConcurrencyStrategy.NONE, region = SitesConstants.CACHE_REGION) public class Page extends Node implements Defaultable, Securable { private RootZone _rootZone; ...... @OneToOne(fetch = FetchType.LAZY) @JoinColumn(name = "root_zone_id", insertable = false, updatable = false) public RootZone getRootZone() { return _rootZone; } public void setRootZone(RootZone rootZone) { if (rootZone != null) { rootZone.setPageId(this.getId()); _rootZone = rootZone; } } I want to get all pages ( call getSiteTree), so I using this query String hpql = "SELECT n FROM Node n "; See the trace I find Page.setRootZone(RootZone) line: 155 NativeMethodAccessorImpl.invoke0(Method, Object, Object[]) line: not available [native method] NativeMethodAccessorImpl.invoke(Object, Object[]) line: 39 DelegatingMethodAccessorImpl.invoke(Object, Object[]) line: 25 Method.invoke(Object, Object...) line: 597 BasicPropertyAccessor$BasicSetter.set(Object, Object, SessionFactoryImplementor) line: 66 PojoEntityTuplizer(AbstractEntityTuplizer).setPropertyValues(Object, Object[]) line: 352 PojoEntityTuplizer.setPropertyValues(Object, Object[]) line: 232 SingleTableEntityPersister(AbstractEntityPersister).setPropertyValues(Object, Object[], EntityMode) line: 3580 TwoPhaseLoad.initializeEntity(Object, boolean, SessionImplementor, PreLoadEvent, PostLoadEvent) line: 152 QueryLoader(Loader).initializeEntitiesAndCollections(List, Object, SessionImplementor, boolean) line: 877 QueryLoader(Loader).doQuery(SessionImplementor, QueryParameters, boolean) line: 752 QueryLoader(Loader).doQueryAndInitializeNonLazyCollections(SessionImplementor, QueryParameters, boolean) line: 259 QueryLoader(Loader).doList(SessionImplementor, QueryParameters) line: 2232 QueryLoader(Loader).listIgnoreQueryCache(SessionImplementor, QueryParameters) line: 2129 QueryLoader(Loader).list(SessionImplementor, QueryParameters, Set, Type[]) line: 2124 QueryLoader.list(SessionImplementor, QueryParameters) line: 401 QueryTranslatorImpl.list(SessionImplementor, QueryParameters) line: 363 HQLQueryPlan.performList(QueryParameters, SessionImplementor) line: 196 SessionImpl.list(String, QueryParameters) line: 1149 QueryImpl.list() line: 102 QueryImpl.getResultList() line: 67 NodeDaoImpl.getSiteTree(long) line: 358 PageNodeServiceImpl.getSiteTree(long) line: 797 NativeMethodAccessorImpl.invoke0(Method, Object, Object[]) line: not available [native method] NativeMethodAccessorImpl.invoke(Object, Object[]) line: 39 DelegatingMethodAccessorImpl.invoke(Object, Object[]) line: 25 Method.invoke(Object, Object...) line: 597 AopUtils.invokeJoinpointUsingReflection(Object, Method, Object[]) line: 307 JdkDynamicAopProxy.invoke(Object, Method, Object[]) line: 198 $Proxy100.getSiteTree(long) line: not available the calling setRootZone in Page makes Hibernate issue a hit to database. I don't want this. So my question is + Why query String hpql = "SELECT n FROM Node n "; issues un-expected trace logs like above. Why the query String hpql = "SELECT n.nodename FROM Node n " not? What is the mechanism behind? Note: Im using hibernate caching level 2. In case I don't want to see that trace logs. I mean I just get Node data only. How to do ? Thanks for your help. Sorry for my bad english :( Van

Read the article

Can't seem to redirect from a ViewScoped constructor.

- by Andrew

I'm having trouble redirecting from a view scoped bean in the case that we don't have the required info for the page in question. The log entry in the @PostContruct is visible in the log right before a NPE relating to the view trying to render itself instead of following my redirect. Why is it ignoring the redirect? Here's my code: @ManagedBean public class WelcomeView { private String sParam; private String aParam; public WelcomeView() { super(); sParam = getURL_Param("surveyName"); aParam = getURL_Param("accountName"); project = fetchProject(sParam, aParam); } @PostConstruct public void redirectWithoutProject() { if (null == project) { try { logger.warn("NO project [" + sParam + "] for account [" + aParam + "]"); FacesContext fc = FacesContext.getCurrentInstance(); fc.getExternalContext().redirect("/errors/noSurvey.jsf"); return; } catch (Exception e) { e.printStackTrace(); } } } .... public boolean getAuthenticated() { if (project.getPasswordProtected()) { return enteredPassword.equals(project.getLoginPassword()); } else return true; } } Here's the stack trace: SEVERE: Error Rendering View[/participant/welcome.xhtml] javax.el.ELException: /templates/participant/welcome.xhtml @80,70 rendered="#{welcomeView.authenticated}": Error reading 'authenticated' on type com.MYCODE.general.controllers.participant.WelcomeView at com.sun.faces.facelets.el.TagValueExpression.getValue(TagValueExpression.java:107) at javax.faces.component.ComponentStateHelper.eval(ComponentStateHelper.java:190) at javax.faces.component.UIComponentBase.isRendered(UIComponentBase.java:416) at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1607) at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1616) at javax.faces.render.Renderer.encodeChildren(Renderer.java:168) at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:848) at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1613) at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1616) at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1616) at com.sun.faces.application.view.FaceletViewHandlingStrategy.renderView(FaceletViewHandlingStrategy.java:380) at com.sun.faces.application.view.MultiViewHandler.renderView(MultiViewHandler.java:126) at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:127) at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:101) at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:139) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:313) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at com.MYCODE.general.filters.StatsFilter.doFilter(StatsFilter.java:28) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:433) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:568) at org.apache.catalina.authenticator.SingleSignOn.invoke(SingleSignOn.java:421) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447) at java.lang.Thread.run(Thread.java:637) Caused by: java.lang.NullPointerException at com.MYCODE.general.controllers.participant.WelcomeView$$M$863c205f.getAuthenticated(WelcomeView.java:127) at com.MYCODE.general.controllers.participant.WelcomeView$$A$863c205f.getAuthenticated(<generated>) at com.MYCODE.general.controllers.participant.WelcomeView.getAuthenticated(WelcomeView.java:125) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at javax.el.BeanELResolver.getValue(BeanELResolver.java:62) at javax.el.CompositeELResolver.getValue(CompositeELResolver.java:53) at com.sun.faces.el.FacesCompositeELResolver.getValue(FacesCompositeELResolver.java:72) at org.apache.el.parser.AstValue.getValue(AstValue.java:118) at org.apache.el.ValueExpressionImpl.getValue(ValueExpressionImpl.java:186) at com.sun.faces.facelets.el.TagValueExpression.getValue(TagValueExpression.java:102) ... 33 more

Read the article

What container type provides better (average) performance than std::map?

- by Truncheon

In the following example a std::map structure is filled with 26 values from A - Z (for key) and 0 - 26 for value. The time taken (on my system) to lookup the last entry (10000000 times) is roughly 250 ms for the vector, and 125 ms for the map. (I compiled using release mode, with O3 option turned on for g++ 4.4) But if for some odd reason I wanted better performance than the std::map, what data structures and functions would I need to consider using? I apologize if the answer seems obvious to you, but I haven't had much experience in the performance critical aspects of C++ programming. UPDATE: This example is rather trivial and hides the true complexity of what I'm trying to achieve. My real world project is a simple scripting language that uses a parser, data tree, and interpreter (instead of a VM stack system). I need to use some kind of data structure (perhaps map) to store the variables names created by script programmers. These are likely to be pretty randomly named, so I need a lookup method that can quickly find a particular key within a (probably) fairly large list of names. #include <ctime> #include <map> #include <vector> #include <iostream> struct mystruct { char key; int value; mystruct(char k = 0, int v = 0) : key(k), value(v) { } }; int find(const std::vector<mystruct>& ref, char key) { for (std::vector<mystruct>::const_iterator i = ref.begin(); i != ref.end(); ++i) if (i->key == key) return i->value; return -1; } int main() { std::map<char, int> mymap; std::vector<mystruct> myvec; for (int i = 'a'; i < 'a' + 26; ++i) { mymap[i] = i - 'a'; myvec.push_back(mystruct(i, i - 'a')); } int pre = clock(); for (int i = 0; i < 10000000; ++i) { find(myvec, 'z'); } std::cout << "linear scan: milli " << clock() - pre << "\n"; pre = clock(); for (int i = 0; i < 10000000; ++i) { mymap['z']; } std::cout << "map scan: milli " << clock() - pre << "\n"; return 0; }

Read the article

iphone cocos2d sprites disappearing

- by jer

I've been working on a game and implementing the physics stuff with chipmunk. All was going fine on the cocos2d part until the integration with chipmunk. A bit of background: The game is a game with blocks. Levels are defined in a property list, where positions, size of the blocks, gravitational forces, etc., are all defined for each block to be shown in the level. The problem is with the blocks showing up. I have a method on my BlockLayer class which is part of my game's main scene. Upon creation of the layer, the property list is read, and all the blocks are created. The following method is called to create the blocks: - (void)createBlock:(Block*)block withAssets:(NSBundle*)assets { Sprite* sprite; switch(block.blockColour) { case kBlockColourGreen: sprite = [Sprite spriteWithFile:[assets pathForResource:@"green" ofType:@"png" inDirectory:@"Blocks"]]; break; case kBlockColourOrange: sprite = [Sprite spriteWithFile:[assets pathForResource:@"orange" ofType:@"png" inDirectory:@"Blocks"]]; break; case kBlockColourRed: sprite = [Sprite spriteWithFile:[assets pathForResource:@"red" ofType:@"png" inDirectory:@"Blocks"]]; break; case kBlockColourBlue: sprite = [Sprite spriteWithFile:[assets pathForResource:@"blue" ofType:@"png" inDirectory:@"Blocks"]]; break; } sprite.position = block.bounds.origin; [self addChild:sprite]; if(block.blockColour == kBlockColourGreen || block.blockColour == kBlockColourRed) space-gravity = cpvmult(cpv(0, 10), 1000); cpVect verts[] = { cpv(-block.bounds.size.width, -block.bounds.size.height), cpv(-block.bounds.size.width, block.bounds.size.height), cpv(block.bounds.size.width, block.bounds.size.height), cpv(block.bounds.size.width, -block.bounds.size.height) }; cpBody* blockBody = cpBodyNew([block.mass floatValue], INFINITY); blockBody-p = cpv(block.bounds.origin.x, block.bounds.origin.y); blockBody-v = cpvzero; cpSpaceAddBody(space, blockBody); cpShape* blockShape = cpPolyShapeNew(blockBody, 4, verts, cpvzero); blockShape-e = 0.9f; blockShape-u = 0.9f; blockShape-data = sprite; cpSpaceAddShape(space, blockShape); } With the above code, the sprites never show up. However, if I comment out the "cpSpaceAddBody(space, blockBody);" line, the sprites show up. The position and size of the blocks are stored in the "bounds" property of instances of the Block class, which is a CGRect. Not sure if it's important, but the orientation of the app is in landscape left, and all the coordinates are based on that orientation. Any help would be greatly appreciated.

Read the article

Isn't the C++ standard library backward-compatible?

- by Chris Metzler

Hi. I'm working on a 64-bit Linux system, trying to build some code that depends on third-party libraries for which I have binaries. During linking, I get a stream of undefined reference errors for one of the libraries, indicating that the linker couldn't resolve references to standard C++ functions/classes, e.g.: librxio.a(EphReader.o): In function `gpstk::EphReader::read_fic_data(std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)': EphReader.cpp:(.text+0x27c): undefined reference to `std::basic_ostream<char, std::char_traits<char> >& std::__ostream_insert<char, std::char_traits<char> >(std::basic_ostream<char, std::char_traits<char> >&, char const*, long)' EphReader.cpp:(.text+0x4e8): undefined reference to `std::basic_ostream<char, std::char_traits<char> >& std::__ostream_insert<char, std::char_traits<char> >(std::basic_ostream<char, std::char_traits<char> >&, char const*, long)' I'm not really a C++ programmer, but this looks to me like it can't find the standard library. Doing some more research, I got the following when I looked at librxio's dependency for the standard library: $ ldd librxio.so.16.0 ./librxio.so.16.0: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.9' not found (required by ./librxio.so.16.0) libm.so.6 => /lib64/libm.so.6 (0x00002aaaaad45000) libstdc++.so.6 => /usr/lib64/libstdc++.so.6 (0x00002aaaaafc8000) libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00002aaaab2c8000) libc.so.6 => /lib64/libc.so.6 (0x00002aaaab4d7000) /lib64/ld-linux-x86-64.so.2 (0x0000555555554000) So I read that as saying that librxio (one of the third-party libraries) requires at least v3.4.9 of the standard library. But the version I have installed is 4.1.2: $ rpm -qa | grep libstdc compat-libstdc++-33-3.2.3-61.x86_64 libstdc++-devel-4.1.2-14.el5.i386 libstdc++-devel-4.1.2-14.el5.x86_64 libstdc++-4.1.2-14.el5.x86_64 libstdc++-4.1.2-14.el5.i386 Shouldn't this work? The shared object major number is 6, same as for v3.4.9. At this level, shouldn't this be backward compatible? It seems like the third-party library is looking for an earlier version of the standard library than what I have installed; but isn't there backward compatibility between versions with the same major number for the shared library? Again, I'm not really a C++ programmer; but I don't see what the problem is. Any advice greatly appreciated. Thanks.

Search Results

Search found 17097 results on 684 pages for 'entry level'.

Page 636/684 | < Previous Page | 632 633 634 635 636 637 638 639 640 641 642 643 | Next Page >

- by Luke Maurer

- by Nelson LaQuet

- by shruti

- by Patrick

- by sigsegv

- by Damo

- by moonground.de

- by Magicked

- by jth

- by Calvin Fisher

- by TheOCD

- by Alexander

- by BobMcGee

- by Erlog

- by Ben Reisner

- by user2908467

- by Carl Jokl

- by fireeyedboy

- by gablin

- by chefsmart

- by Iapilgrim

- by Andrew

- by Truncheon

- by jer

- by Chris Metzler

< Previous Page | 632 633 634 635 636 637 638 639 640 641 642 643 | Next Page >