Search Results

Search found 64472 results on 2579 pages for 'data context'.

Page 638/2579 | < Previous Page | 634 635 636 637 638 639 640 641 642 643 644 645  | Next Page >

• RDA Health Checks for SOA

  - by ShawnBailey

  What is a health check in RDA? A health check evaluates something in your environment to determine whether a change needs to be considered in order to avoid a problem or optimize fuctionality. Examples of what this 'something' might be are: Configuration Parameters JVM Options Runtime Statistics What have we done for SOA? In the latest release of RDA, 4.30, we have added a Rule Set for SOA called 'Oracle SOA 11g (11.1.1) Post Installation (Generic)'. This Rule Set contains 14 SOA related health checks. These checks were all derived from common issues / solutions we see in support of the SOA product. Many of the recommendations come from the product documentation while others are covered in the SOA Knowledge Base. Our goal is that you will be able to easily identify the areas of concern and understand the guidance available from the output of the Rule Set. Running the health checks for SOA The rules that the checks use are installed with RDA and bundled by product or functional area into what are called 'Rule Sets'. To view the available Rule Sets simply run the command from the RDA home location: rda.cmd (or .sh) -dT hcve This will bring up a list of the available HCVE (Health Check / Verification Engine) Rule Sets. Each Rule Set contains a group of related rules that are used for evalutation and display of results. A rule can be considered synonymous with a single health check and they are assigned an ID, Name and Description that can be seen when they are executed. The Rule Set for SOA is option number 11 and you just enter this selection at the prompt. The Rule Set will then execute to completion. After running an HCVE Rule Set the tool will write the output to the RDA_HOME/output folder. The simplest way to view the output is to drag the .htm file to a browser but of course it can also be uploaded to a Service Request for evaluation by Oracle Support. Many of the Rule Sets will prompt you for information before they can execute their rules but the SOA Rule Set will identify the SOA domains configured in your RDA setup.cfg file. This means that you don't need to answer all of the questions again about where stuff is but it also means that you must have configured RDA for SOA. To run the Rule Set: Download the latest version of RDA from MOS Doc ID 314422.1 Configure RDA for your SOA domains. Detailed steps can be found here In it's simplest form the command is 'rda.cmd (.sh) -S SOA' Go to the RDA home location and enter the command 'rda.cmd (or .sh) -dT hcve' Select option '11' It should be noted that this our first release of a SOA Rule Set so there will probably be some things we need to clean up or fix. None of these rules will actually modify anything on your system as they are read only and do the evaluations internally. Please let us know if you have any issues with the rules or ideas for new ones so we can make them as useful as possible. The Checks Here is a list of the SOA health checks by ID, Name and Description. ID Name Description A00100 SOA Domain Homes Lists the SOA domains that were indentified from the RDA setup.cfg file A00200 Coherence Protocol Conflict Checks to see if you have both Unicast and Multicast configured in the same domain. Checks both the setDomainEnv and config.xml entries (if it exists). We recommend Unicast with fully qualified host names or IP addresses. A00210 Coherence Fully Qualified Host Checks that the host names are fully qualified or that IP addresses are used. Will fail if unqualified host names are detected. A00220 Unicast Local Host Checks that the Coherence localhost is specified for use with Unicast A00300 JTA Timeout Checks that the JTA timeout is configured for the domain and lists the value. The bundled rule will only list the current values of the JTA timeout for each SOA Domain. In the future the rule with fail with a warning if the value is 300 seconds or lower. It is recommended that timeouts follow the pattern 'syncMaxWaitTime' < EJB Timeouts < JTA Timeout. The 300 second value is important because the EJB Timeouts default to 300 seconds. Additional information can be found in MOS Doc ID 880313.1. A00310 XA Max Time Checks that the JTA Maximum XA call time is set for the domain. Fails if it is not explicitly set or if the value is less than or equal to the default of 12000 ms. A00320 XA Timeout Checks that the XA timeout is enabled and that the value is '0' for the SOA Data Source (SOADataSource-jdbc.xml) A00330 JDBC Statement Timeout Checks that the Statement Timeout is set for all SOA Data Sources. Fails if the value is not set or if it is set to the default of -1. A00400 XA Driver Checks that the SOA Data Source is configured to use an XA driver. Fails if it is not. A00410 JDBC Capacity Settings Checks that the minimum and maximum capacity are equal for all SOA Data Sources. Fails if they are not and lists specifically which data sources failed. A00500 SOA Roles Checks that the default SOA roles 'SOAAdmin' and 'SOAOperator' are configured for the soa-infra application in the file sytem-jazn-data.xml. Fails if they are not. A00700 SOA-INFRA Deployment Checks that the soa-infra application is deployed to either a cluster, all members of a cluster or a stand alone server. A00710 SOA Deployments Checks that the SOA related applications are deployed to the same domain members as soa-infra. A00720 SOA Library Deployments Checks that the SOA related libraries are deployed to the same domain members as soa-infra. A00730 Data Source Deployments Checks that the SOA Data Sources are all targeted to the same domain members as soa-infra

  Read the article

• ubuntu 13.04 - wireless settings help

  - by James Ellis

  Im having problems connecting my wifi in Ubuntu 13.04 So i was wondering if filling in the data manually ie: the IPv4, IPv6, the SSID and BSSID info etc. I did try this before but maybe i put in the wrong data or maybe not enough Would that make it work?? I just dont know how to find out some of the data you need to put in or if im putting the wrong stuff in??? Im new and its confusing. does anyone know the solution?

  Read the article

• Optimize strategies for xml parsing?

  - by Future2020

  I am looking for general optimization tips and guidelines for xml parsing. One of the optimization strategies is of course selecting the "right" parser. A detailed comparison between the available parsers for ios can be found here http://www.raywenderlich.com/553/how-to-chose-the-best-xml-parser-for-your-iphone-project. However, I am currently trying to investigate general guidelines and tips on how to optimize by payloads to increase the performance as possible. This question is similar to (a question I have posted in the context of ios) but I have not got a sufficient answer. So this question is not in the context of any particular programming language.

  Read the article

• Trying to implement fling events on an object

  - by Adam Short

  I have a game object, well a bitmap, which I'd like to "fling". I'm struggling to get it to fling ontouchlistener due to it being a bitmap and not sure how to proceed and I'm struggling to find the resources to help. Here's my code so far: https://github.com/addrum/Shapes GameActivity class: package com.main.shapes; import android.app.Activity; import android.content.Context; import android.graphics.Bitmap; import android.graphics.BitmapFactory; import android.graphics.Canvas; import android.os.Bundle; import android.view.GestureDetector; import android.view.MotionEvent; import android.view.SurfaceHolder; import android.view.SurfaceView; import android.view.View.OnTouchListener; import android.view.Window; public class GameActivity extends Activity { private GestureDetector gestureDetector; View view; Bitmap ball; float x, y; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); //Remove title bar this.requestWindowFeature(Window.FEATURE_NO_TITLE); view = new View(this); ball = BitmapFactory.decodeResource(getResources(), R.drawable.ball); gestureDetector = new GestureDetector(this, new GestureListener()); x = 0; y = 0; setContentView(view); ball.setOnTouchListener(new OnTouchListener() { @Override public boolean onTouch(android.view.View v, MotionEvent event) { // TODO Auto-generated method stub return false; } }); } @Override protected void onPause() { super.onPause(); view.pause(); } @Override protected void onResume() { super.onResume(); view.resume(); } public class View extends SurfaceView implements Runnable { Thread thread = null; SurfaceHolder holder; boolean canRun = false; public View(Context context) { super(context); holder = getHolder(); } public void run() { while (canRun) { if (!holder.getSurface().isValid()) { continue; } Canvas c = holder.lockCanvas(); c.drawARGB(255, 255, 255, 255); c.drawBitmap(ball, x - (ball.getWidth() / 2), y - (ball.getHeight() / 2), null); holder.unlockCanvasAndPost(c); } } public void pause() { canRun = false; while (true) { try { thread.join(); } catch (InterruptedException e) { e.printStackTrace(); } break; } thread = null; } public void resume() { canRun = true; thread = new Thread(this); thread.start(); } } } GestureListener class: package com.main.shapes; import android.view.GestureDetector.SimpleOnGestureListener; import android.view.MotionEvent; public class GestureListener extends SimpleOnGestureListener { private static final int SWIPE_MIN_DISTANCE = 120; private static final int SWIPE_THRESHOLD_VELOCITY = 200; @Override public boolean onFling(MotionEvent e1, MotionEvent e2, float velocityX, float velocityY) { if (e1.getX() - e2.getX() > SWIPE_MIN_DISTANCE && Math.abs(velocityX) > SWIPE_THRESHOLD_VELOCITY) { //From Right to Left return true; } else if (e2.getX() - e1.getX() > SWIPE_MIN_DISTANCE && Math.abs(velocityX) > SWIPE_THRESHOLD_VELOCITY) { //From Left to Right return true; } if (e1.getY() - e2.getY() > SWIPE_MIN_DISTANCE && Math.abs(velocityY) > SWIPE_THRESHOLD_VELOCITY) { //From Bottom to Top return true; } else if (e2.getY() - e1.getY() > SWIPE_MIN_DISTANCE && Math.abs(velocityY) > SWIPE_THRESHOLD_VELOCITY) { //From Top to Bottom return true; } return false; } @Override public boolean onDown(MotionEvent e) { //always return true since all gestures always begin with onDown and<br> //if this returns false, the framework won't try to pick up onFling for example. return true; } }

  Read the article

• How to bind ArrayList Object to an ASPxGridView control

  - by nikolaosk

  I have been involved with a ASP.Net project recently and I have implemented it using the awesome DevExpress ASP.Net controls. Parts of the project involved binding data from custom objects, SqlDataSource & ObjectDataSource data sources to the ASPxGridView control. In this post I will show you how to bind data from an ArrayList object to the ASPxGridView control . If you want to implement this example you need to download the trial version of these controls unless you are a licensed holder of...(read more)

  Read the article

• What information must never appear in logs?

  - by MainMa

  I'm about to write the company guidelines about what must never appear in logs (trace of an application). In fact, some developers try to include as many information as possible in trace, making it risky to store those logs, and extremely dangerous to submit them, especially when the customer doesn't know this information is stored, because she never cared about this and never read documentation and/or warning messages. For example, when dealing with files, some developers are tempted to trace the names of the files. For example before appending file name to a directory, if we trace everything on error, it will be easy to notice for example that the appended name is too long, and that the bug in the code was to forget to check for the length of the concatenated string. It is helpful, but this is sensitive data, and must never appear in logs. In the same way: Passwords, IP addresses and network information (MAC address, host name, etc.)¹, Database accesses, Direct input from user and stored business data must never appear in trace. So what other types of information must be banished from the logs? Are there any guidelines already written which I can use? ¹ Obviously, I'm not talking about things as IIS or Apache logs. What I'm talking about is the sort of information which is collected with the only intent to debug the application itself, not to trace the activity of untrusted entities. Edit: Thank you for your answers and your comments. Since my question is not too precise, I'll try to answer the questions asked in the comments: What I'm doing with the logs? The logs of the application may be stored in memory, which means either in plain on hard disk on localhost, in a database, again in plain, or in Windows Events. In every case, the concern is that those sources may not be safe enough. For example, when a customer runs an application and this application stores logs in plain text file in temp directory, anybody who has a physical access to the PC can read those logs. The logs of the application may also be sent through internet. For example, if a customer has an issue with an application, we can ask her to run this application in full-trace mode and to send us the log file. Also, some application may sent automatically the crash report to us (and even if there are warnings about sensitive data, in most cases customers don't read them). Am I talking about specific fields? No. I'm working on general business applications only, so the only sensitive data is business data. There is nothing related to health or other fields covered by specific regulations. But thank you to talk about that, I probably should take a look about those fields for some clues about what I can include in guidelines. Isn't it easier to encrypt the data? No. It would make every application much more difficult, especially if we want to use C# diagnostics and TraceSource. It would also require to manage authorizations, which is not the easiest think to do. Finally, if we are talking about the logs submitted to us from a customer, we must be able to read the logs, but without having access to sensitive data. So technically, it's easier to never include sensitive information in logs at all and to never care about how and where those logs are stored.

  Read the article

• Exploring TCP throughput with DTrace

  - by user12820842

  One key measure to use when assessing TCP throughput is assessing the amount of unacknowledged data in the pipe. This is sometimes termed the Bandwidth Delay Product (BDP) (note that BDP is often used more generally as the product of the link capacity and the end-to-end delay). In DTrace terms, the amount of unacknowledged data in bytes for the connection is the different between the next sequence number to send and the lowest unacknoweldged sequence number (tcps_snxt - tcps_suna). According to the theory, when the number of unacknowledged bytes for the connection is less than the receive window of the peer, the path bandwidth is the limiting factor for throughput. In other words, if we can fill the pipe without the peer TCP complaining (by virtue of its window size reaching 0), we are purely bandwidth-limited. If the peer's receive window is too small however, the sending TCP has to wait for acknowledgements before it can send more data. In this case the round-trip time (RTT) limits throughput. In such cases the effective throughput limit is the window size divided by the RTT, e.g. if the window size is 64K and the RTT is 0.5sec, the throughput is 128K/s. So a neat way to visually determine if the receive window of clients may be too small should be to compare the distribution of BDP values for the server versus the client's advertised receive window. If the BDP distribution overlaps the send window distribution such that it is to the right (or lower down in DTrace since quantizations are displayed vertically), it indicates that the amount of unacknowledged data regularly exceeds the client's receive window, so that it is possible that the sender may have more data to send but is blocked by a zero-window on the client side. In the following example, we compare the distribution of BDP values to the receive window advertised by the receiver (10.175.96.92) for a large file download via http. # dtrace -s tcp_tput.d ^C BDP(bytes) 10.175.96.92 80 value ------------- Distribution ------------- count -1 | 0 0 | 6 1 | 0 2 | 0 4 | 0 8 | 0 16 | 0 32 | 0 64 | 0 128 | 0 256 | 3 512 | 0 1024 | 0 2048 | 9 4096 | 14 8192 | 27 16384 | 67 32768 |@@ 1464 65536 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 32396 131072 | 0 SWND(bytes) 10.175.96.92 80 value ------------- Distribution ------------- count 16384 | 0 32768 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 17067 65536 | 0 Here we have a puzzle. We can see that the receiver's advertised window is in the 32768-65535 range, while the amount of unacknowledged data in the pipe is largely in the 65536-131071 range. What's going on here? Surely in a case like this we should see zero-window events, since the amount of data in the pipe regularly exceeds the window size of the receiver. We can see that we don't see any zero-window events since the SWND distribution displays no 0 values - it stays within the 32768-65535 range. The explanation is straightforward enough. TCP Window scaling is in operation for this connection - the Window Scale TCP option is used on connection setup to allow a connection to advertise (and have advertised to it) a window greater than 65536 bytes. In this case the scaling shift is 1, so this explains why the SWND values are clustered in the 32768-65535 range rather than the 65536-131071 range - the SWND value needs to be multiplied by two since the reciever is also scaling its window by a shift factor of 1. Here's the simple script that compares BDP and SWND distributions, fixed to take account of window scaling. #!/usr/sbin/dtrace -s #pragma D option quiet tcp:::send / (args[4]-tcp_flags & (TH_SYN|TH_RST|TH_FIN)) == 0 / { @bdp["BDP(bytes)", args[2]-ip_daddr, args[4]-tcp_sport] = quantize(args[3]-tcps_snxt - args[3]-tcps_suna); } tcp:::receive / (args[4]-tcp_flags & (TH_SYN|TH_RST|TH_FIN)) == 0 / { @swnd["SWND(bytes)", args[2]-ip_saddr, args[4]-tcp_dport] = quantize((args[4]-tcp_window)*(1 tcps_snd_ws)); } And here's the fixed output. # dtrace -s tcp_tput_scaled.d ^C BDP(bytes) 10.175.96.92 80 value ------------- Distribution ------------- count -1 | 0 0 | 39 1 | 0 2 | 0 4 | 0 8 | 0 16 | 0 32 | 0 64 | 0 128 | 0 256 | 3 512 | 0 1024 | 0 2048 | 4 4096 | 9 8192 | 22 16384 | 37 32768 |@ 99 65536 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 3858 131072 | 0 SWND(bytes) 10.175.96.92 80 value ------------- Distribution ------------- count 512 | 0 1024 | 1 2048 | 0 4096 | 2 8192 | 4 16384 | 7 32768 | 14 65536 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 1956 131072 | 0

  Read the article

• Keystore and Credential Store interplay in OWSM - 11g

  - by Prakash Yamuna

  One of the most common problems faced by customer's is the use of the keystore and it's interplay with the credential store.Here is a picture that describes these relationships.(Click on the picture for a larger image). The picture makes some assumptions in describing the relationship. Some of assumptions are: a) the key used for signing and encryption are the same. b) A keystore can have multiple keys and each key can have it's own alias. In the picture I show only a single key with alias "orakey". c) The keystore being described here is a JKS keystore. Things can vary slightly for other type of keystores. I hope to have a detailed How To that provides the larger picture and then shows these relationships in that context and this picture was created in the context of that How-To. However I think people will find this picture useful on a standalone basis as well. The <serviceInstance> is the entry you will find in jps-config.xml

  Read the article

• Where Are You on the Visualization Maturity Curve?

  - by Celine Beck

  The old phrase “A picture is worth a thousand words” is as true now as ever. Providing the right users with access to the right product data, at the right time, can provide significant benefits to a business. This is especially evident with increasing technical and product complexities, elongated supply chains, and growing pressure to bring innovative products to market faster. With this in mind, it is easy to understand why visualization is an integral part of any successful product lifecycle management (PLM) strategy. At a bare minimum, knowledge workers use multiple individual documents of different formats and structure, and leverage visualization solutions to access information; but the real value of visualization can be fully reaped when it is connected to enterprise applications like PLM and tied to the appropriate business context. The picture below illustrates this visualization maturity curve, as we presented during the last Oracle Open World and the transformational effect that visualization can have on PLM processes and performance (check out the post about AutoVue Key Highlights from Oracle Open World 2012 for more information). Organizations are likely to see greater positive impact on business performance when visualization is connected to enterprise systems, allowing access to information coming from multiple sources, such as PLM, supply chain management (SCM) and enterprise resource planning (ERP). This allows organizations to reach higher levels of collaboration and optimize decision-making capacity as users can benefit from in-context access to visual information. For instance, within a PLM system, a design engineer can access a product assembly and review digital annotations added by other users specific to the engineering change request he is reviewing rather than all historical annotations. The last stage on the curve is what we call augmented business visualization (ABV).  ABV is an innovative framework which lets structured data (from Oracle’s Agile PLM for instance) interact with unstructured data (documents, design, 3D models, etc). With this new level of integration, information coming from multiple sources can be presented in a highly visual fashion; color displays can be used in order to identify parts with specific characteristics (for example pending quality issues) and you can take actions directly from within the context of documents and designs, maximizing user productivity. Those who had the chance to attend our PLM session during Oracle Open World already got a sneak peek of our latest augmented business visualization for Oracle’s Agile PLM. The solution generated a lot of wows. Stephen Porter, CEO at Zero Wait State, indicated in a post entitled “The PLM State: the Manhattan Project-Oracle’s Next Big Secret Weapon” that “this kind of synergy between visualization and PLM could qualify as a powerful weapon differentiating Agile PLM from other solutions.” If you are interested in learning more about ABV for Oracle’s Agile PLM and hear about real examples of usage of visualization at all stages of the visualization maturity curve, don’t miss our Visual Decision Making to Optimize New Product Development and Introduction session during the Oracle Value Chain Summit (Feb. 4-6, 2013, San Francisco). We look forward to seeing you there!

  Read the article

• Flattening a Jagged Array with LINQ

  - by PSteele

  Today I had to flatten a jagged array.  In my case, it was a string[][] and I needed to make sure every single string contained in that jagged array was set to something (non-null and non-empty).  LINQ made the flattening very easy.  In fact, I ended up making a generic version that I could use to flatten any type of jagged array (assuming it's a T[][]): private static IEnumerable<T> Flatten<T>(IEnumerable<T[]> data) { return from r in data from c in r select c; } Then, checking to make sure the data was valid, was easy: var flattened = Flatten(data); bool isValid = !flattened.Any(s => String.IsNullOrEmpty(s)); You could even use method grouping and reduce the validation to: bool isValid = !flattened.Any(String.IsNullOrEmpty); Technorati Tags: .NET,LINQ,Jagged Array

  Read the article

• Giving PHP the permission to make a git pull request

  - by Bernd

  Hello, I would like to allow PHP to execute a Git pull command. But there are some problems with the user and permissions. How did you solve the problem? PHP runs as user www-data. Therefore I've changed the .git directory owner/group to www-data (chown www-data:www-data -R .git). As it is turned out later www-data has no SSH keys. Is it a good idea to give it one? If yes where to place? Or is it possible to allow it to use a specific key. Best regards, Bernd

  Read the article

• bash script to login to webpage

  - by Nathan Cazell

  I am trying to login into this page but I cannot for the life of me get it to work. I have to login to this site when i connect to my school's wifi in order to start a session. So far ive tried to use bash and cUrl to achieve this but have only achieved to give myself a headache. will cUrl work or am I on the wrong track? Any help is greatly appreciated! Thanks, N Here's what i tried: curl --cookie-jar cjar --output /dev/null http://campus.fsu.edu/webapps/login/ curl --cookie cjar --cookie-jar cjar \ --data 'username=foo' \ --data 'password=bar' \ --data 'service=http://campus.fsu.edu/webapps/login/' \ --data 'loginurl=http://campus.fsu.edu/webapps/login/bb_bb60/logincas.jsp' \ --location \ --output ~/loginresult.html \ http://campus.fsu.edu/webapps/login/

  Read the article

• T-SQL User-Defined Functions: the good, the bad, and the ugly (part 4)

  - by Hugo Kornelis

  Scalar user-defined functions are bad for performance. I already showed that for T-SQL scalar user-defined functions without and with data access, and for most CLR scalar user-defined functions without data access , and in this blog post I will show that CLR scalar user-defined functions with data access fit into that picture. First attempt Sticking to my simplistic example of finding the triple of an integer value by reading it from a pre-populated lookup table and following the standard recommendations...(read more)

  Read the article

• Software licensing and code generation

  - by Nicol Bolas

  I'm developing a tool that generates code from some various data. The tool itself will be licensed with the MIT license, which strikes a good balance for me in terms of allowing the freedom to use and modify it, while still holding the copyright. OK, but what is the legal status of the code generated by the tool? Who holds the copyright for code generated by a tool? Do I need to give users of the tool a license for the generated code, or do they already have that by virtue of it being generated by them? What is different about this code generation system (which may be relevant) is that the source information about the code generation is provided by the system itself. The user doesn't feed source data in; the source data is bundled along with it. They simply have the means to transform it in various ways (filtering out parts of the data they don't want, etc). Obviously they could edit the bundled data. Does that affect anything about this?

  Read the article

• Seamless STP with Oracle SOA Suite

  - by user12339860

  STP stands for “Straight Through Processing”. Wikipedia describes STP as a solution that enables “the entire trade process for capital markets and payment transactions to be conducted electronically without the need for re-keying or manual intervention, subject to legal and regulatory restrictions” .I will deal with the later part of the definition i.e “payment transactions without manual intervention” in this article. The STP that I am writing about involves the interaction between a Bank and its’ corporate customers,to that extent this business case is also called “Corporate Payments”.Simply put a  Corporate Payment-STP solution needs to connect the payment transaction right from the Corporate ERP into the Bank’s Payment Hub. A SOA based STP solution can do a lot more than just process transaction. But before I get to the solution let me describe the perspectives of the two primary parties in this interaction. The Corporate customer and the Bank. Corporate's Interaction with Bank:  Typically it is the treasury department of an enterprise which interacts with the Bank on a daily basis. Here is how a day of interaction would look like from the treasury department of a corp. Corporate Cash Retrieve Beginning of day totals Monitor Cash Accounts Send or receive cash between accounts Supply chain payments Payment Settlements Calculate settlement positions Retrieve End of Day totals Assess Transaction Financial Impact Short Term Investment Desk Retrieve Current Account information Conduct Investment activities Bank’s Interaction with the Corporate :  From the Bank’s perspective, the interaction starts from the point of on boarding a corporate customer to billing the corporate for the value added services it provides. Once the corporate is on-boarded the daily interaction involves Handle the various formats of data arriving from customers Process Beginning of Day & End of Day reporting request from customers Meet compliance requirements Process Payments Transmit Payment Status Challenges with this Interaction :  Both the Bank & the Corporate face many challenges from these interactions. Some of the challenges include Keeping a consistent view of transaction data for various LOBs of the corporate & the Bank Corporate customers use different ERPs, hence the data formats are bound to be different Can the Bank’s IT systems convert the data formats that can be easily mapped to the corporate ERP How does the Bank manage the communication profiles of these customers?  Corporate customers are demanding near real time visibility on their corporate accounts Corporate customers can make better cash management decisions if they can analyse the impact. Can the Bank create opportunities to sell its products to the investment desks at corporate houses & manage their orders? How will the Bank bill the corporate customer for the value added services it provides. What does a SOA based Seamless STP solution bring to the table? Highlights of Oracle SOA based STP solution For the Corporate Customer: No Manual or Paper based banking transactions Secure Delivery of Payment data to the Bank from multiple ERPs without customization Single Portal for monitoring & administering payment transactions Rule based validation of payments Customer has data necessary for more effective handling of payment and cash management decisions  Business measurements track progress toward payment cost goals  For the Bank: Reduces time & complexity of transactions Simplifies the process of introducing new products to corporate customers Single Payment hub for all corporate ERP payments across multiple instruments New Revenue sources by delivering value added services to customers Leverages existing payment infrastructure Remove Inconsistent data formats and interchange between bank and corporate systems  Compliance and many other benefits

  Read the article

• Giving PHP the permission to make a git pull request

  - by Bernd

  I would like to allow PHP to execute a Git pull command. But there are some problems with the user and permissions. How did you solve the problem? PHP runs as user www-data. Therefore I've changed the .git directory owner/group to www-data (chown www-data:www-data -R .git). As it is turned out later www-data has no SSH keys. Is it a good idea to give it one? If yes where to place? Or is it possible to allow it to use a specific key. Best regards, Bernd

  Read the article

• Using the link command to keep backups on another drive

  - by Xavier

  I have a folder that contains a not so large amount of space called /data/backup. I have been told that if I link that folder (/data/backup) to an even bigger folder area like /bigdata/backup for example, that I will be able to execute backups to the /data/backup folder. It will then just create a link, but the data will be seen in both folders and the latter one (/bigdata/backup) will contain the backup results but it will show on both folders. Since the /bigdata/backup has far more disk space then the backup will no longer fail because of space problems in the /data/backup one. Is this true?

  Read the article

• SQLAuthority News – Interesting Whitepaper – We Loaded 1TB in 30 Minutes with SSIS, and So Can You

  - by pinaldave

  In February 2008, Microsoft announced a record-breaking data load using Microsoft SQL Server Integration Services (SSIS): 1 TB of data in less than 30 minutes. That data load, using SQL Server Integration Services, was 30% faster than the previous best time using a commercial ETL tool. This paper outlines what it took: the software, hardware, [...]

  Read the article

• Authentication system brainstorm

  - by gansbrest

  Hi. We got multiple small websites (microsites) and one main high traffic one with big users base. Right now the requirement is to build authentication system which should allow users to loign with the same identity across the network. All website are running on different domains, powered by Drupal 6 CMS and have separate databases (so sharing tables with prefix is not an option + it creates a huge mess in the db). Here is the set of core requirements I came up with: Users should be able to login with the same credentials to all sites within the network User’s data sharing between Main site (storage) and all micro sites within the network Data synchronization across the network when user changes the data (update email or password for example) The login/registration process should be seamless and consistent Register on any of the sites across the network and use that identity to login later on. In the future there might be a need to add openid authentication options. Basically we are looking at something similar stackexchange does, but not sure if they have central users base on not. I was thinking about custom solution which will include 2 parts (modules), one will be stored on the Main site for users data storing and responding to requests from clients. Second part (module) will be placed on each microsite, which is going to send requests to the Master. Some kind of client - server setup. One of the complications I see right away is #3. Data Synhcronization across the network. I just don't want to reinvent the wheel and maybe some work is already done in this direction. Looking forward to your ideas on how to approach this project. EDIT: We use MySQL database

  Read the article

• Silverlight binary serialization using Protobuf-net

  how to serialize a pure .NET object classes to a fast binary data

  Read the article

• Archbeat Link-O-Rama Top 10 Facebook Faves for October 20-26, 2013

  - by OTN ArchBeat

  What are the 4,460 fans of the OTN ArchBeat Facebook Page talking about? The list below represents the Top 10 most popular articles, blog posts, and other content from across the community. Enterprise Grade Deployment Considerations for Oracle Identity Manager AD Connector | Firdaus Fraz Oracle Fusion Middleware solution architect Firdaus Fraz illustrates provides best practice recommendations for setting up an enterprise deployment environment for the OIM connector for Microsoft Active Directory. A Roadmap for SOA Development and Delivery | Mark Nelson Do you know the way to S-O-A? Mark Nelson does. His latest blog post, part of an ongoing series, will help to keep you from getting lost along the way. The road ahead for WebLogic 12c | Edwin Biemond Oracle ACE Edwin Biemond shares his thoughts on announced new features in Oracle WebLogic 12.1.3 & 12.1.4 and compares those upcoming releases to Oracle WebLogic 12.1.2. Oracle GoldenGate 12c - New Release, New Features | Michael Rainey Rittman Mead's Michael Rainey takes you on guided tour through the GoldenGate 12c features that "are relevant to data warehouse and data migration work we typically see in the business intelligence world." Reproducing WebLogic Stuck Threads with ADF CreateInsert Operation and ORDER BY Clause | Andrejus Baranovsikis Another post from Oracle ACE Director Andrejus Baranovsikis on dealing with WebLogic Stuck Threads. This one includes a test case application you can download. The Impact of SaaS - The Times They Are A-Changin' | Floyd Teter Oracle ACE Director Floyd Teter shares some truly interesting insight gained in conversations with three Fortune 500 CIOs. Configure Oracle Identity Manager AD/LDAP Authentication | Arda Eralp A step-by-step how-to from a member of the Fusion Middleware Applications Consultancy team. Java-Powered Robot Named NAO Wows Crowds | Tori Wieldt Tori Wieldt interviews a robot and human. Updated ODI Statement of Direction | Robert Schweighardt Heads up Oracle Data Integrator fans! A new product statement of direction document is available, offering "an overview of the strategic product plans for Oracle’s data integration products for bulk data movement and transformation, specifically Oracle Data Integrator (ODI) and Oracle Warehouse Builder (OWB)." Oracle BI Apps 11.1.1.7.1 – GoldenGate Integration - Part 2: Setup and Configuration | Michael Rainey Michael Rainey continues his series with another technical article for you GoldenGate fans. Thought for the Day "Intuition will tell the thinking mind where to look next." — Jonas Salk, American medical researcher and virologist (October 28, 1914 – June 23, 1995) Source: brainyquote.com

  Read the article

• CodePlex Daily Summary for Thursday, August 30, 2012

  CodePlex Daily Summary for Thursday, August 30, 2012Popular ReleasesCoevery - Free CRM: Coevery 1.0: This is the first alpha release of Coevery.ExpressProfiler: Initial release of ExpressProfiler v1.2: This is initial release of ExpressProfilerNabu Library: 2012-08-29, 14: .Net Framework 4.0, .Net Framework 4.5 Debug and Release builds.Math.NET Numerics: Math.NET Numerics v2.2.1: Major linear algebra rework since v2.1, now available on Codeplex as well (previous versions were only available via NuGet). Since v2.2.0: Student-T density more robust for very large degrees of freedom Sparse Kronecker product much more efficient (now leverages sparsity) Direct access to raw matrix storage implementations for advanced extensibility Now also separate package for signed core library with a strong name (we dropped strong names in v2.2.0) Also available as NuGet packages...Microsoft SQL Server Product Samples: Database: AdventureWorks Databases – 2012, 2008R2 and 2008: About this release This release consolidates AdventureWorks databases for SQL Server 2012, 2008R2 and 2008 versions to one page. Each zip file contains an mdf database file and ldf log file. This should make it easier to find and download AdventureWorks databases since all OLTP versions are on one page. There are no database schema changes. For each release of the product, there is a light-weight and full version of the AdventureWorks sample database. The light-weight version is denoted by ...ImageServer: v1.1: This is the first version releasedChristoc's DotNetNuke Module Development Template: DotNetNuke Project Templates V1.1 for VS2012: This release is specifically for Visual Studio 2012 Support, distributed through the Visual Studio Extensions gallery at http://visualstudiogallery.msdn.microsoft.com/ After you build in Release mode the installable packages (source/install) can be found in the INSTALL folder now, within your module's folder, not the packages folder anymore Check out the blog post for all of the details about this release. http://www.dotnetnuke.com/Resources/Blogs/EntryId/3471/New-Visual-Studio-2012-Projec...Home Access Plus+: v8.0: v8.0828.1800 RELEASE CHANGED TO BETA Any issues, please log them on http://www.edugeek.net/forums/home-access-plus/ This is full release, NO upgrade ZIP will be provided as most files require replacing. To upgrade from a previous version, delete everything but your AppData folder, extract all but the AppData folder and run your HAP+ install Documentation is supplied in the Web Zip The Quota Services require executing a script to register the service, this can be found in there install di...Phalanger - The PHP Language Compiler for the .NET Framework: 3.0.0.3406 (September 2012): New features: Extended ReflectionClass libxml error handling, constants DateTime::modify(), DateTime::getOffset() TreatWarningsAsErrors MSBuild option OnlyPrecompiledCode configuration option; allows to use only compiled code Fixes: ArgsAware exception fix accessing .NET properties bug fix ASP.NET session handler fix for OutOfProc mode DateTime methods (WordPress posting fix) Phalanger Tools for Visual Studio: Visual Studio 2010 & 2012 New debugger engine, PHP-like debugging ...NougakuDoCompanion: v1.1.0: Add temp folder of local resource, Resize local resource. Change launch ruby commnadline args from rack to bundle. 1.NougakuDoCompanion v1.1.0 cspkg.zip - cspkg and ServiceConfiguration.xml (small , medium, large, extra large vm) - include NougakudoSetupTool.exe and readme.txt 2.NougakuDoCompanion v1.1.0.zip - Source code. include NougakudoSetupTool.exe - include activerecord-sqlserver-adapter patch in paches folder. 3.Depends tools. - Windows Azure SDK for .NET June 2012(1.7SP1) - Windows ...WatchersNET CKEditor™ Provider for DotNetNuke®: CKEditor Provider 1.14.06: Whats New Added CKEditor 3.6.4 oEmbed Plugin can now handle short urls changes The Template File can now parsed from an xml file instead of js (More Info...) Style Sets can now parsed from an xml file instead of js (More Info...) Fixed Showing wrong Pages in Child Portal in the Link Dialog Fixed Urls in dnnpages Plugin Fixed Issue #6969 WordCount Plugin Fixed Issue #6973 File-Browser: Fixed Deleting of Files File-Browser: Improved loading time File-Browser: Improved the loa...MabiCommerce: MabiCommerce 1.0.1: What's NewSetup now creates shortcuts Fix spelling errors Minor enhancement to the Map window.VFPX: Data Explorer 3: This release is the first alpha release for DX3. Even though great care has been taken, the project manager highly recommends you work with test data and you regularly back up the DataExplorer.DBF found in your HOME(7) folder. New features are documented on the project home page. IMPORTANT Once installed, make sure to go to the Data Explorer Options page, click the Restore to Default button. This brings up a dialog asking if you want to maintain connections and customizations that were done...ScintillaNET: ScintillaNET 2.5.2: This release has been built from the 2.5 branch. Version 2.5.2 is functionally identical to the 2.5.1 release but also includes the XML documentation comments file generated by Visual Studio. It is not 100% comprehensive but it will give you Visual Studio IntelliSense for a large part of the API. Just make sure the ScintillaNET.xml file is in the same folder as the ScintillaNET.dll reference you're using in your projects. (The XML file does not need to be distributed with your application)....Facebook Web Parts for SharePoint 2010: Version 1.0.1 - WSP: SharePoint 2010 solution (WSP) Resolved a bug from Version 1.0 - WSP where user profile names would not properly update.Contactor: GSMContactorProgram V1.0 - Source Code: This is the source code for the program, For Visual Studio 2012 RCTouchInjector: TouchInjector 1.1: Version 1.1: fixed a bug with the autorun optionWinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.0: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...BlackJumboDog: Ver5.7.1: 2012.08.25 Ver5.7.1 (1)?????·?????LING?????????????? (2)SMTP???（????）????、?????\?????????????????????Visual Studio Team Foundation Server Branching and Merging Guide: v2 - Visual Studio 2012: Welcome to the Branching and Merging Guide Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has been through an independent technical review Documentation has been reviewed by the quality and recording team All critical bugs have been resolved Known Issues / Bugs Spelling, grammar and content revisions are in progress. Hotfix will be published.New ProjectsAd Specific Redirect Generator: Ad Specific Redirect Generatorargsv, command line argument processors: Two libraries to process command line options, one(argsvCPython) is written for Python applications and other one(the argsvCPP) is for C++ applications.AutomationML Export Import Mapper: This Tool supports the mapping between SystemUnitClass-Libraries, used to exchange data in the AutomationML Format between Exporters and Importers.BioPathSearch: Tool for probibalistic biochemical networks construction from input substrete to required product based on information from KEGG databasebuidingapp: i am buiding app but i not sure public because i don't code finish. then i upload code and pulish my application,. thank you for reading mynote. see you next tiCatalogo de Empresas y Productos: Este es el catalogo de empresas y productos asociadas a la produccion agricola en CRclarktestcodeplex: test codeplexDatabase Clean-up Engine - DataWashroom: Database Clean-up Rules EngineEdEx: edexExpense Management System: Expense Management SystemFinger Tracking with Kinect SDK for XBOX: This project explained step by step how to perform finger and hand tracking with the Kinect for XBOX with the official Kinect SDK.Flower - Workflow Engine: Flower is a simple yet powerful workflow engine allowing to develop workflows in C#.Grid: Copyright 2011 Badkid development. All rights reserved. Play Grid the the retro style arcade puzzle game. Join lines between the gids to create boxes to get pHeadSprings Assignment: A program to create custom tokens using class FizzBuzz programming. Ice Scream: IcescreamiD Commerce + Logistics: iD Commerce + Logistics is a company based outside of Chicago, Illinois specializing in fulfillment solutions and custom development.Mido: Mido is a simple utility that adds text or images watermarks to your photos, images and pictures.MLSTest: MLSTest is a Windows based software for the analysis of Multilocus Sequence Data for euckaryotic organisms My Project Foundation Library: A foundation library for asp.net web project, including easy-to-use data access layer and other utility code.MyTestProject001: ?????codeplex，??????????。MyTestProject2: My Test projectNEF - Native Extensibility Framework: NEF is an open source IoC extensibility framework targetting C++. It is modeled after the more useful features of MEF in C#.RazorSpy: A simple toy/tool for exploring the output of the Razor Parser for a particular document.Relay Command for WinRT: A simple RelayCommand for WinRT (sans and entire MVVM framework).Rocca. Store: Document storage with email capabilitiesScrabble Nights: Scrabble is a word game in which two to four players score points by forming words from individual lettered tiles on a game board marked with a 15-by-15 gridSlFrame: SlFrameSmart Data Access layer: WE ARE USING SMART DATA ACCESS LAYER MEANS ITS TIME TO FORGET ABOUT SYSTEM.DATA.SQLCLIENT NAMESPACE.SportSlot: This project allows you to search for available sport venuesSwitcher 2012: Allows for fast switching between source and header file in Visual Studio 2012testddtfs2908201201: satime tracking: coming soonTradePlatform.NET: TradePlatform.NET is addition to MetaTrader 4 client terminal which extends trading experience, MQL language and provides .NET world communication bridge.WaMa-SkyDriveClient: Project Description WaMa-SkyDriveClient is a Windows Skydrive-client, with Live authentication.Web Optimization: The ASP.NET Web optimization framework provides services to improve the performance of your ASP.NET Web applications.Web Pocket: Web tool for rapid application development of mobile software WinRT Toolkit: The purpose of WinRT Toolkit is to provide efficient and developer friendly instruments (API / Components...).Xcel Directory Service: Xcel Directory Service is an Excel 2010 add-in used to retrieve data from Active Directory using an import utility and user defined functions.zhangfacai: this project is based on ASP.NET MVC 4 and HTML5. It's a website to integrate public web services like amazon, live, facebook, etc. By using these services, mak

  Read the article

• Which one is better offline method for large scale application

  - by Manish Pansiniya

  We've a big data management website used by several property. Some of our customers have downtime (they can't access net for an hour or two). We want our site to support offline data viewing and inventory management (typical data search and add/remove) and when the user goes online we can sync the changes back to our central database. Customers use several platforms like Windows, iOS, etc. We've been looking into several different options, here are the major choices - Develop offline web app supported in HTML5. Develop a 'fallback' mechanism and interact with data from the app cache as explained in here (http://www.htmlgoodies.com/html5/tutorials/introduction-to-offline-web- applications-using-) Develop a desktop based cross platform solution. I remember the old MONO which has been popular. Here's a post (What do you suggest for cross platform apps, including web cross-platform-apps-including-web) and another one (Technology choice for cross platform development (desktop and phone)? platform-development-desktop-and-phone?rq=1) I realize the the desktop solution might be hard to maintain and result in some compatibility issues and demand test environments. Can HTML5 handle moderate to high level complexity and data flow? Or would it be better to rely on a desktop based app for better scalability & performance?

  Read the article

• ubuntu 9.04 /var/www permissions

  - by luca

  ubuntu 9.04, user luca wants to access the /var/www directory. the directory is owned by user root, group root I changed the group ownership to www-data (sudo chgrp -R www-data /var/www/) and added write privileges to that group (sudo chmod -R g+r /var/www), and added luca to that group (sudo adduser luca www-data). Now, why can't luca still write to /var/www? It should be able to, right? in /etc/group we have: "www-data:x:33:luca" permissions for /var/www are: "drwxrwxr-x 2 root www-data 4096 Feb 26 15:35 www"

  Read the article

• beginner - best way to do a 'Confirm' page? [closed]

  - by W_P

  I am a beginning web app developer, wondering about the best way to implement a "Confirm Page" upon form submission. I have heard that it's best for the script that a form POSTs to to be implemented by handling the POST data and then redirecting to another page, so the user isn't directly viewing the page that was POSTed to. My question is about the best way to implement a "Confirm before data save" page. Do I Have my form POST to a script, which marshals the data, puts in a GET, and redirects to the confirm page, which unmarshals and displays the data in another form, where the user can then either confirm (which causes another POST to a script that actually saves the data) or deny (which causes the user to be redirected back to the original form, with their input added)? Have my form POST directly to the confirm page, which is displayed to the user and then, like #1, gives the user the option to confirm or deny? Have my form GET the confirm page, which then does the expected behavior? I feel like there is a common-sense answer to this question that I am just not getting.

  Read the article

< Previous Page | 634 635 636 637 638 639 640 641 642 643 644 645  | Next Page >