Search Results

Search found 1841 results on 74 pages for 'pci compliant'.

Page 64/74 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• Troubleshooting my internet connection

  - by Simon Verbeke

  While I was out of the house, my father rearranged the network cables a bit. I don't know what he has done exactly - He says nothing more then pulling and untangling. When I came back home, my internet connection changed its IP from 192.168.0.205 to 169.254.197.233. The speed changed from 1Gbps to 10Mbps. It has also been at 100Mbps for a while. My subnetmask changed from 255.255.255.0 to 255.255.0.0. The standard gateway changed from 192.168.0.1 to no standard gateway. My DNS servers remain the same. I have checked the lights of the UTP ports, and it looks like it's only sending a heartbeat every few seconds. A sketch of the (relevant part of) the network: My PC ----- extender ----- modem ^ ^ ^ Wired | Wired | This thing connects two cables to each other All the cabling is gigabit, my network card is a Realtek RTL8168C(P)/8111(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20). THe modem is a CBN SVG6540E I have no idea what is going on here and I don't know how to find out either. Any help is welcome! If you need any more info, please ask.

  Read the article

• How can I start hostednetwork on Windows 7?

  - by Pirozek

  When I type in admin console command to start hostednetwork netsh wlan start hostednetwork it gives me this: The hosted network couldn't be started. The group or resource is not in the correct state to perform the requested operation. There is a hotfix from Microsoft but it didn't help me. Any advice? C:\Users\Pirozek>netsh wlan show driver Interface name: Wireless Network Connection 3 Driver : D-Link AirPlus DWL-G520 Wireless PCI Adapter(rev .B) Vendor : Atheros Communications Inc. Provider : Atheros Communications Inc. Date : 8.7.2009 Version : 8.0.0.171 INF file : C:\Windows\INF\oem108.inf Files : 2 total C:\Windows\system32\DRIVERS\athrx.sys C:\Windows\system32\drivers\vwifibus.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g FIPS 140-2 mode supported : Yes Hosted network supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Shared WEP-40bit Open WEP-104bit Shared WEP-104bit Open WEP Shared WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP Vendor defined TKIP WPA2-Enterprise Vendor defined Vendor defined Vendor defined WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP Vendor defined CCMP WPA2-Enterprise Vendor defined Vendor defined Vendor defined WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP

  Read the article

• Get Matrox Millenium video card working in Ubuntu 9.10

  - by wcoenen

  I have installed Ubuntu 9.10 on an old PC and it is mostly working, except for some heavy drawing defects that show up whenever I start dragging a window or scrolling inside a window or menu. It looks like the video driver copies the rectangle being moved to the wrong location. I have taken a look in /var/log/Xorg.0.log and the following line shows the detected video card: (--) PCI:*(0:0:8:0) 102b:0519:0000:0000 Matrox Graphics, Inc. MGA 2064W [Millennium] rev 1, Mem@ 0xf9800000/16384, 0xfb000000/8388608, BIOS @0x????????/65536 (==) Using default built-in configuration (30 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default mga Device 0" Driver "mga" EndSection How do I fix the drawing defects? It turned out that the 24 bit color depth (automatically selected by ubuntu 9.10) was the problem; apparantly the mga driver doesn't handle this well for cards with little memory. I took the following steps to resolve the issue (you can skip the first three steps if you already have a semi-working xorg.conf file): Reboot ubuntu in recovery mode, to get a root console without X running. Run Xorg -configure to generate a xorg.conf.new file Copy the file to /etc/X11/xorg.conf with cp xorg.conf.new /etc/X11/xorg.conf (assuming it didn't exist yet; that's why I generated it) Open the new config file with sudo nano /etc/X11/xorg.conf and make sure the screen section is configured for 16 bit color depth like this: Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "1024x768" EndSubSection EndSection I can't guarantee those were the only important changes I made - I tried a few things in my attempts to create a valid xorg.conf file. But I'm pretty sure that the screen section was the important part.

  Read the article

• nVidia performance with newer X and newer driver abysmal with Compiz

  - by Nakedible

  I recently upgraded Debian to Xorg 2.9.4 and installed nvidia-glx from experimental, version 260.19.21. This was somewhat of an uphill battle as the dependencies for the experimental nvidia-glx package are still somewhat broken. I got it to work without forcing the installation of any packages and without modifying the packages. However, after the upgrade compiz performance has been abysmal. I am using the desktop wall plugin and switching viewports is really slow - takes a few seconds for each switch. In addition to this, every effect that compiz does, such as zoom animations for icons when launching applications, takes seconds. The viewport switching speed changes relative to the amount of windows on that virtual screen - empty screens switch almost at normal speed, single browser windows work almost decently, but just 4 rxvt terminals slows the switches down to a crawl. My compiz configuration should be pretty basic. Xorg is likewise configured without anything special - the only "custom" configuration is forcing the driver name to be "nvidia". I've fiddled around with the nvidia-settings and compizconfig trying different VSync settings, but none of those helped. My graphics card is: NVIDIA GPU NVS 3100M (GT218) at PCI:1:0:0 (GPU-0). This is laptop GPU that is from the Geforce GTX 200 series. Graphics card performance should naturally be no problem. EDIT: In the end, nothing really worked, and I got really annoyed with the state of compiz and its support in Debian. Many nVidia driver revisions have passed and I am using Gnome 3 now, so I am accepting the best answers to this question even though the issue was not resolved.

  Read the article

• Hyper-V and attaching physical disks

  - by Mike Christiansen

  So, I'm looking at rebuilding my home server. My current setup is the following Windows 7 Ultimate 1TB Boot Drive (my smallest drive) Windows Dynamic Spanned volume, continaing 1x 1TB drive, 2x 2TB drives, totalling 5TB. I am upgrading to a hardware RAID controller, and I would like to run Hyper-V server core. However, I want to retain the ability to join my "file server" to a homegroup, so I must use Windows 7. I know VHDs can only be like 127GB or something, so I obviously need to directly connect disks to my Windows 7 machine. Here is my plan: Server Core 2008 R2 (Hyper-V) 1TB Boot Drive (storing VHDs for boot drives of VMs) - possibly in a RAID 1 with my other 1TB drive 5x 2TB drives (1x 2TB drive hot spare), totalling 10TB, directly attached to a Windows 7 VM, for use of homegroup for this array. In the past, I directly attached the windows dynamic volume to a Windows 7 VM, and performance was abysmal. The question is, with hardware RAID, will it really make that much of a difference? Server specs: Intel Core 2 Quad Q9550 2.83GHz Asus Maximus II Formula (PCI-E x16) 8GB DDR2 RAM PC2-6400 (Yes, I know its a bit out of date)

  Read the article

• What are the default return values for operator< and operator[] in C++ (Visual Studio 6)?

  - by DustOff

  I've inherited a large Visual Studio 6 C++ project that needs to be translated for VS2005. Some of the classes defined operator< and operator[], but don't specify return types in the declarations. VS6 allows this, but not VS2005. I am aware that the C standard specifies that the default return type for normal functions is int, and I assumed VS6 might have been following that, but would this apply to C++ operators as well? Or could VS6 figure out the return type on its own? For example, the code defines a custom string class like this: class String { char arr[16]; public: operator<(const String& other) { return something1 < something2; } operator[](int index) { return arr[index]; } }; Would VS6 have simply put the return types for both as int, or would it have been smart enough to figure out that operator[] should return a char and operator< should return a bool (and not convert both results to int all the time)? Of course I have to add return types to make this code VS2005 C++ compliant, but I want to make sure to specify the same type as before, as to not immediately change program behavior (we're going for compatibility at the moment; we'll standardize things later).

  Read the article

• Proper approach to debug PC startup problems (POST)

  - by saurabhj

  My CPU was heating up to around 65 deg C and last time this had happened (about a year ago), I got thermal paste put between the CPU and heat sink and this managed to get it down to about 45 - 50 degrees. This time, I got some thermal paste and put it myself. However, my PC is not showing the POST display and not starting up. This is what happens LEDs light up HDDs spin Mouse is getting power All fans including the processor fan starts No display on monitor No diagnostic beep sounds (no sounds at all) What I have tried Removing everything including RAM, HDD, PCI cards, AGP card Boot up machine No changes from first state. What steps can I take to figure out where the problem lies? Note (might be important) When I removed the heat sink, the processor came out with it (it was stuck to it inspite of the processor latch on) Had to pry it separate with a screw-driver. Configuration Pentium 4, 2.8 Ghz with HT (very old, I know) Original Intel Mobo with onboard sound and graphics (GB series) 2x512 Mb DDR-RAM 2 SATA disks (320 Gigs / 250 gigs) DVD Writer Creative Sound Card Network card Any help would be appreciated. Thanks!

  Read the article

• Hyper-V and attaching physical disks [migrated]

  - by Mike Christiansen

  So, I'm looking at rebuilding my home server. My current setup is the following Windows 7 Ultimate 1TB Boot Drive (my smallest drive) Windows Dynamic Spanned volume, continaing 1x 1TB drive, 2x 2TB drives, totalling 5TB. I am upgrading to a hardware RAID controller, and I would like to run Hyper-V server core. However, I want to retain the ability to join my "file server" to a homegroup, so I must use Windows 7. I know VHDs can only be like 127GB or something, so I obviously need to directly connect disks to my Windows 7 machine. Here is my plan: Server Core 2008 R2 (Hyper-V) 1TB Boot Drive (storing VHDs for boot drives of VMs) - possibly in a RAID 1 with my other 1TB drive 5x 2TB drives (1x 2TB drive hot spare), totalling 10TB, directly attached to a Windows 7 VM, for use of homegroup for this array. In the past, I directly attached the windows dynamic volume to a Windows 7 VM, and performance was abysmal. The question is, with hardware RAID, will it really make that much of a difference? Server specs: Intel Core 2 Quad Q9550 2.83GHz Asus Maximus II Formula (PCI-E x16) 8GB DDR2 RAM PC2-6400 (Yes, I know its a bit out of date)

  Read the article

• How does PHP interface with Apache?

  - by Sbm007

  Hi, I've almost finished writing a HTTP/1.0 compliant web server under Java (no commercial usage as such, this is just for fun) and basically I want to include PHP support. I realize that this is no easy task at all, but I think it'll be a nice accomplishment. So I want to know how PHP exactly interfaces with the Apache web server (or any other web server really), so I can learn from it and write my own PHP wrapper. It doesn't necessarily have to be mod_php, I don't mind writing a FastCGI wrapper - which to my knowledge is capable of running PHP as well. I would've thought that all that PHP needs is the output that goes to client (so it can interpret the PHP parts), the full HTTP request from client (so it can extract POST variables and such) and the client's host name. And then you simply take the parsed PHP code and write that to the output stream. There will probably be more things, but in essence that's how I would have thought it works. From what I've gathered so far, apache2handler provides an API which PHP makes use of to 'connect' to Apache. I guess it's an idea to look at the source code for apache2handler and php5apache2.dll or so, but before I do that I thought I'd ask SO first. If anyone has more information, experience, or some sort of specification that is relevant to this then please let me know. Thanks in advance!

  Read the article

• What are some arguments to support the position that the Dojo JavasScript library is secure, accessi

  - by LES2

  We have developed a small web application for a client. We decided on the Dojo framework to develop the app (requirements included were full i18n and a11y). Originally, the web app we developed was to be a "prototype", but we made the prototype production quality anyway, just in case. It turns out that the app we developed (or a variant of it) is going to production (many months hence), but it's so awesome that the enterprise architecture group is a little afraid. 508c compliant is a concern, as is security for this group. I now need to justify the use of Dojo to this architecture group, explicitly making the case that Dojo does not pose a security risk and that Dojo will not hurt accessibility (and that Dojo is there to help meet core requirements). Note: the web app currently requires JavaScript to be turned on and a stylesheet to work. We use a relatively minor subset of Dojo: of course, dojo core, and dijit.form.Form, ValidationTextBox and a few others. We do use dojox.grid.DataGrid (but no drag N drop or editable cells, which are not fully a11y). I have done some research of my own, of course, but I any information or advice you have would be most helpful. Regards, LES2

  Read the article

• HPET missing from available clocksources on CentOS

  - by squareone

  I am having trouble using HPET on my physical machine. It is not available, even though I have enabled it in my bios, forced it in grub, and triple checked my kernel to include HPET in its compilation. Motherboard: Supermicro X9DRW Processor: 2x Intel(R) Xeon(R) CPU E5-2640 SAS Controller: LSI Logic / Symbios Logic SAS2004 PCI-Express Fusion-MPT SAS-2 [Spitfire] (rev 03) Distro: CentOS 6.3 Kernel: 3.4.21-rt32 #2 SMP PREEMPT RT x86_64 GNU/Linux Grub: hpet=force clocksource=hpet .config file: CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_HPET=y dmesg | grep hpet: Command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet Kernel command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet cat /sys/devices/system/clocksource/clocksource0/current_clocksource: tsc cat /sys/devices/system/clocksource/clocksource0/available_clocksource: tsc jiffies What is even more confusing, is that I have about a dozen other machines that utilize the same kernel .config, and can use HPET fine. I fear it is a hardware issue, but would appreciate any advice or help with getting HPET available. Thanks in advance!

  Read the article

• `this` in global scope in ECMAScript 6

  - by Nathan Wall

  I've tried looking in the ES6 draft myself, but I'm not sure where to look: Can someone tell me if this in ES6 necessarily refers to the global object? Will this object have same members as the global scope? If you could answer for ES5 that would be helpful as well. I know this in global scope refers to the global object in the browser and in most other ES environments, like Node. I just want to know if that's the defined behavior by the spec or if that's extended behavior that implementers have added (and if this behavior will continue in ES6 implementations). In addition, is the global object always the same thing as the global scope? Or are there distinctions? Update - Why I want to know: I am basically trying to figure out how to get the global object reliably in ES5 & 6. I can't rely on window because that's specific to the browser, nor can I rely on global because that's specific to environments like Node. I know this in Node can refer to module in module scope, but I think it still refers to global in global scope. I want a cross-environment ES5 & 6 compliant way to get the global object (if possible). It seems like in all the environments I know of this in global scope does that, but I want to know if it's part of the actual spec (and so reliable across any environment that I may not be familiar with). I also need to know if the global scope and the global object are the same thing by the spec. In other words will all variables in global scope be the same as globalobject.variable_name?

  Read the article

• SBS 2008 - DNS Forwarders timing out.

  - by Moif Murphy

  Hello, We have an SBS 2008 server that keeps losing connection to the internet approx 2-3 times a day. It's a simple setup, BT Business Broadband ADSL to a Wireless Zyxel router to the server. Clients connect via WiFi from their laptops. Plugging ethernet in makes no difference, only a reboot of the router seems to bring everything back again. I'm looking at the forwarders on the DNS properties page and they're timing out when trying to resolve the IPs. Currently there are two IPs in there, 194.72.9.34 which has timed out and 194.72.9.38 which has finally resolved to ns8.bt.net We've been in there and replaced all media, installed a PCI NIC, have changed the router three times. There are no errors in the DNS event logs pertaining to what's going on. We've also been on to BT who are adamant that it's not their end. Could someone shed some light on what could be going on or where else to look in the configuration of the server? Thank you.

  Read the article

• How to make a custom ear file in maven

  - by Zombies

  Here is my challenge, I need to make an ear file for a specific container. To be more specific on how this ear will be created: This is a standard j2ee ear file, with 1 WAR in it. The container it is deployed to will expect certain xml files (which can easily be found (somewhere) inside the source project). Here are my obstacles The source folder contains various container specific xml files. But, these files do not map directly to where the container expects them inside the EAR file. For example, there will be a file that this container expects to be in 'EARFILE.ear/config/connections.xml'. But this file is located (in the source) at /some/obscure/unrelated/directory. This is the case for about 5-7 files. I cannot change the original source project layout at all. So, how can I create the compliant EAR file that I need. There is NO plugin at this time for the container that I am using, I have certainly looked.

  Read the article

• 3-4 old computers = general purpose cluster?

  - by TheLQ

  I have 3 old computers lying around right now running a P2 at 800 MHz(?), Intel Mobile 1.6 GHz, AMD Athlon XP 2000+ at 1.66 GHz, and (might not use this) P4 at 2.7 GHz, all with 512 MB Ram, and am considering clustering them together for fun/knowledge. They would be running an undecided version of linux, preferably ubuntu based. The issue is what I want to use it for: general computing and occasional video encoding. By general computing I mean day to day tasks. However I'm not sure if every program started by a single X session is going to exist on the same machine, defeating the purpose of such a system. Will programs be split up or exist on one machine? Second, assuming this is running 100baseT ethernet (not sure if the PCI slot itself could handle Gigabit), would the speed of having a program exist over the network be an issue? It seems that the constant asking of various things in RAM would be quite slow. And before you say "buy another computer!", that's not the point of this question. I'm asking would it be usable, not necessarily practical. And yes I know, this is going to be extreamly power consuming.

  Read the article

• Can I have a single solid state drive and a RAID array on the same machine? [closed]

  - by jaminto

  Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

  Read the article

• LMDE detects a wireless card, but can't use it

  - by Davidos

  LMDE can see my wireless card, and correctly identifies it, but it refuses to let me turn it on through the shiny graphical interface. Is there a way to use the non-shiny terminal to turn on my wireless? One small tidbit I noticed was the stated version; it says the version is 00. I believe that's hexadecimal for 0, which may indicate something screwy with the software. It would be nice if someone could tell me how to figure out how to solve this kind of problem in the future. *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 00 serial: 91:e3:7b:0d:a3:a9 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-1-amd64 firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:e1d00000-e1d01fff I've tested multiple other network managers, and none of them work. W ireless switch is on, I'm sure it's a driver problem.

  Read the article

• Wi-Fi won't automatically connect (box in Windows configuration gets unchecked)

  - by greg88

  The checkbox that says "Use windows to configure my wireless network settings" keeps getting unchecked (Wirless Network Connection - Change advanced settings - Wireless networks tab.) How do I stop that from happening? (So the wi-fi will reconnect.) When I manually re-check the box, it automatically connects.) I have a D-Link AirPremier DWL-G550 PCI adapter. I installed the newest driver, 5.3.0.46, and that didn't solve the problem. I took the "Atheros Client Utility" (the program window says "D-Link AirPremier Client Utility" when you run it) out of the start menu, rebooted, and that didn't solve the problem. (That utility puts a signal bar similiar to the one MS Windows puts there, and it's gone now.) The D-Link client utility has an option to automatically connect to preferred networks, but it is greyed out. It is also greyed out if I install the driver and utility right off the D-Link installation CD, so the problem isn't that the utility and driver are incompatible versions. I want to use Windows to handle the connection anyway, as the D-Link utility is garbage. Windows XP SP3 w/all current updates.

  Read the article

• C preprocessor problem in Microsoft Visual Studio 2010

  - by Remo.D

  I've encountered a problem with the new Visual C++ in VS 2010. I've got a header with the following defines: #define STC(y) #y #define STR(y) STC(\y) #define NUM(y) 0##y The intent is that you can have some constant around like #define TOKEN x5A and then you can have the token as a number or as a string: NUM(TOKEN) -> 0x5A STR(TOKEN) -> "\x5A" This is the expected behavior under the the substitution rules of macros arguments and so far it has worked well with gcc, open watcom, pellesC (lcc), Digital Mars C and Visual C++ in VS2008 Express. Today I recompiled the library with VS2010 Express only to discover that it doesn't work anymore! Using the new version I would get: NUM(TOKEN) -> 0x5A STR(TOKEN) -> "\y" It seems that the new preprocessor treats \y as an escape sequence even within a macro body which is a non-sense as escape sequences only have a meaning in literal strings. I suspect this is a gray area of the ANSI standard but even if the original behavior was mandated by the standard, MS VC++ is not exactly famous to be 100% ANSI C compliant so I guess I'll have to live with the new behavior of the MS compiler. Given that, does anybody have a suggestion on how to re-implement the original macros behavior with VS2010?

  Read the article

• Graphics card ATI Asus 9250 128 MB AGP problem.Monitor switching off.

  - by Dominick1978

  I have an old system with these specs: Motherboard: Via P4x266a (with AGP 4x) CPU: P4 1,7 Ghz Memory: 1152 MB DDR SDRAM Graphics card: Voodoo 3 2000 16 MB PSU: 300 Watt It also has 1 dvd-rom, 1 dvd-rw, 2 hard drives (all 4 connected via molex) , 1 sounblaster sound card and 1 ethernet card (both connected via pci). OS: XP Pro Recently I bought Asus 9250 128 MB AGP to replace voodoo.Wnen I switch on the pc the initial screens (until after the xp logo) sometimes are distorted with blurred colours.When XP are loaded there is some flickering but the rest are ok.XP can't recognize the card seeing it as just a VGA adapter.I have downloaded the latest xp drivers from ATI website and installed them.Then after the restart everything is ok (no distorted image or blurring) until after the xp logo.After this the monitor turns off while the pc is still running.I have tried many drivers but the problem persists (of course I removed the voodoo drivers before from the display adapter properties).Only once I have managed to enter XP (after changing BIOS features for graphics card from 256 MB to 128 MB) but the drivers on the control panel had an exclamation mark (ati 9250!) and below them ati 9250 secondary without ! under the display adapter tab and the ATI catalyst program said that it couldn;t find the card.That was the opnly time I went beyond the xp logo.Now the monitor auto switcheS off. So, what do you think? 1)Is this a broken card? 2)Is it the drivers of the card? 3)Is it PSU fault? 4)Anything else? Thanks for your help and excuse my english!

  Read the article

• Video adapter problem on new motherboard

  - by Dmitriy Matveev

  Something bad happened to my PC several days ago. I wasn't near my PC, so I have no idea about what happened it was just halted. When I tried to boot it was entering infinite loops of a few seconds power up (cpu, hdds, etc) and then power down. I've tried to boot the system with no additional components (that includes hdd, video, network adapters and even memory) connected and that didn't solved the problem, so I've made a decision that most likely it's either some a problem with power unit or with motherboard. I've tried to replace my power unit by another one (which was expected to be working) and the problem didn't resolved again. I've bought a new MB (ASUS P5KPL-AM SE) and tried to get it running with my old CPU and memory (I hope it's still alive). Since this MB include on-board video I've tried to run the PC without installation of mine video. The PC wasn't running and the BIOS was beeping one long signal following by two short (Does it means a video problem?). After that I've installed my video adapter to PCI-E slot and tried to boot the system again and the BIOS was beeping the same. I don't get it. I may expect some problem with CPU and/or memory since I don't know what happened to my PC (maybe some power failure or something different), but not with video and not with on-board video on newly bought MB. How can I understand what's wrong with my system now?

  Read the article

• SQL Server: Network pauses after installing cheap SATA card: Is there a solution?

  - by samsmith

  At the risk of being assigned to the "bad DBA" club... I did something desperate, and may have to undo it. Problem: After installing a low cost eSATA board, my SQL Server is intermittently unresponsive (seemingly when there is a lot of IO to the eSATA drive). Questions: 1) Is there a solution to the intermittent unresponsiveness that allows me to keep the eSATA in place? 2) Whether or not (1==true): What is a decent, low cost way to add 1-3 TB storage to SQL for non-critical SQL DBs? Detail: Our SAN is full, and expanding it is costly and will take a month. I have a pressing need to add 1-3 TB for some development DBs (e.g. not mission critical; data loss is OK). As a bandaid, I threw a $20 eSATA PCI board in the Dell 1950 server, and attached an external 2TB eSATA drive. This seemed to work fine, but I notice that our production SQL DBs, and even remote desktop, now experience network "pauses" that they never did before (with both SQL client apps and remote desktop throwing "networking problem" errors). This SQL Server has lots of memory, and runs an instance of SQL 2005 (where all line of business apps reside) and an instance SQL 2008 (for development db's). SQL Server RAM has been appropriately configured, and this setup has run great for years. The server is: Dell 1950 Win2003 x64 14GB RAM PERC controller, 2 mirrored hd's internal Dell SAN over gbit ethernet, dual homed 2 PCIx slots (1 used by NIC for SAN, 1 now in use for eSATA board) Thank you for suggestions!

  Read the article

• Edit Settings in web.config

  - by Scott Selby

  I didn't know how to title this question - I am making a request to PayPal's Express Payment API. I am using their dll that helps make the request and parse the response. The instructions for their code to work is to add you authorization credentials in the web.config file. I have done so. My problem is that I want to be able to edit these credentials that are being set dynamically ( probably get from SQL ) because we are going to allow different users to enter their API credentials. Sending the request to PayPal looks like this Dim wrapper As New SetExpressCheckoutReq() wrapper.SetExpressCheckoutRequest = request Dim service As New PayPalAPIInterfaceServiceService() Dim setECResponse As SetExpressCheckoutResponseType = service.SetExpressCheckout(wrapper) There's not much room in there to edit the header of the request , because PayPalAPIInterfaceServiceService() is defined in their dll and applies its own header based on the credentials in the web.config. So, my question is , is there a way to point in the web.config to another location when it looks in web.config? I'm not to sure this is possible , also is there any way to edit the header of a request that is defined in a dll without changing the dll (to stay pci compliant) The line in the web.config is here: <account apiUsername="****" apiPassword="****" apiSignature="****"/>

  Read the article

• Hungry hungry BIOS: why do I have less than 4 GiB of memory?

  - by Rhymoid

  I thought I had 4 GiB of memory, but just to be sure, let's ask the BIOS about that: ?: sudo dmidecode --type 20 # dmidecode 2.12 SMBIOS 2.6 present. Handle 0x000B, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x000A Memory Array Mapped Address Handle: 0x000E Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x000D, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00080000000 Ending Address: 0x000FFFFFFFF Range Size: 2 GB Physical Device Handle: 0x000C Memory Array Mapped Address Handle: 0x000E Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Alright, 4 GiB it is. But I can't use all of it: ?: cat /proc/meminfo | head -n 1 MemTotal: 3913452 kB Somehow, somewhere, I lost 274 MiB. Where did 6% of my memory go? Now I know the address ranges in DMI are incorrect, because the ACPI memory map reports usable ranges well beyond the ending address of the second memory module: ?: dmesg | grep -E "BIOS-e820: .* usable" [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dee7bfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable I get pretty much the same info from /proc/iomem (except for the 4 kiB hole 0x000-0xFFF), which also shows that the kernel only accounts for less than 8 MiB. I guess 0x00000000-0x7FFFFFFF is indeed mapped to the first memory module, and 0x80000000-0xDFFFFFFF to part of the second memory module (a bunch of ACPI NVS things live between 0xDEE7C000 and 0xDEF30FFF, and the remaining 16-something MiB of that range are just 'reserved'). I guess the highest 0x18000000 bytes of the second memory module are mapped above the 4 GiB mark. But even then, there are two problems: 128 MiB (0x08000000 bytes, living somewhere between 0xE0000000 and 0xFFFFFFFF) are still completely unaccounted for. To note, my graphics card is on PCI-Express and (allegedly) has 1 GiB dedicated memory, so that shouldn't be the culprit. Did the BIOS screw up in moving the memory, leaving it partially shadowed by MMIO? Even with this mediocre explanation, I only 'found' 128 MiB. But /proc/meminfo is reporting a much larger deficit; where's the other 146 MiB? How does Linux count MemTotal?

  Read the article

• SATA disks boot order?

  - by kire

  I have a computer with 4 SATA disks connected, 2 to the motherboard and 2 to a PCI-card. I've moved all the disks from other computers so 2 of them already has windows installed, the other 2 has just had data on them. I know one of the windows installations works and i want to use this install. If i only have this disk connected the computer boots fine. The problem is that when i boot with all 4 disks connected i get an error message about not being able to boot. This message is in swedish(the wrong windows installation is swedish) so it has to come from that installation. Ok, that means it is trying to boot from wrong disk, i try to pull out that disk but then i get the same error in english. I pull out the fourth disk instead I get another error about NTLDR not being able to load. If i disconnect all drives except the one with the correct windows installation, windows boots fine and i can also connect the other drives while windows is running and browse around in them without any problems. I have no clue what to do. In my BIOS setup i can only select SATA as boot-option, not the order of the disks. I also tried to remove what's left of windows on the other disk by simply deleting everything in explorer(got hidden- and sytstem-files visible). Both windows installations are XP btw. Edit: I switched the cables around and now it magically works. :)

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >