Search Results

Search found 59278 results on 2372 pages for 'time estimation'.

Page 641/2372 | < Previous Page | 637 638 639 640 641 642 643 644 645 646 647 648  | Next Page >

• HDMI sound gone, can't figure out how to turn it back on

  - by Oli

  I have had an Acer Revo box as a media centre for a while. I recently installed Ubuntu Server (10.10) on it and polished it up with nodm (one of the most simple ways to launch an X session) and installed boxee. It's been working fine for over a month. It's just running ALSA. I've had problems with PulseAudio/Boxee/HDMI before so I wanted to keep it simple. And that worked. It pushed both PCM and digital (AAC and various Dolby codecs) over HDMI perfectly. But I restarted it the other day after mucking around with some nfs configuration and now there isn't any sound. The hardware is an ION chipset. Nvidia 9400M graphics with Nvidia MCP79/7A audio. One thing I have noticed is there doesn't appear to be any sign of a IEC958 device. A traditional fix in the past for fresh installs has been to load alsamixer, find the IEC device and toggle its mute but I can't. I'm certain this used to represent the HDMI output. It just doesn't seem to exist any more unless I run sudo alsa-utils restart while boxee is running, when I see it in an error message: * Shutting down ALSA... [ OK ] * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1388: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... ...done. When nodm (and thus boxee) aren't running, I don't see this error but alsamixer still doesn't show the IEC channel. aplay -l gives: card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0 Its section in lshw reads: *-multimedia description: Audio device product: MCP79 High Definition Audio vendor: nVidia Corporation physical id: 8 bus info: pci@0000:00:08.0 version: b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2 resources: irq:22 memory:fae78000-fae7bfff I was running on the stock PAE kernel but now it's running on 2.6.37.1. I upgraded to see if that fixed things; it didn't. I'm considering a reinstall but I hate doing that because a) there's a bit of custom configuration in getting X and Boxee to start on boot and b) I don't know what the problem is. If I reinstall this time, I'll end up doing that every time the sound breaks. I love Ubuntu but I don't want to install it once a month. Is there any way to forcibly reset all alsa settings and restart from scratch (without doing a reinstall)? Any other tips? If you need more information, just ask.

  Read the article

• How can one keep an ecommerce site active?

  - by Mantorok

  So, you build an e-commerce site, all your products are on there, but then very little changes which obviously causes your site to become less active, and ultimately not ranking as highly in search engines. Is there anything that can be done to keep it active? I'm aware that inbound links are important and I guess these come over time, are there any other recommended means of keeping the site active?

  Read the article

• Top 10 Lightweight Frameworks for PHP Development

  The major frameworks can be overkill for many PHP development projects. These 10 lightweight solutions have minimal resource and time requirements.

  Read the article

• Top 10 Lightweight Frameworks for PHP Development

  The major frameworks can be overkill for many PHP development projects. These 10 lightweight solutions have minimal resource and time requirements.

  Read the article

• 12.04 "Try Ubuntu without installing" results in graphical artifacts on MacBook

  - by ubuntukeks

  I am trying to bless my MacBookPro 5,3 (Unibody/Core2Duo/Nvidia 9400M+Nvidia 9600M GT) with Ubuntu 12.04 (already got rEFIt running), but every time I select Try Ubuntu without installing, it will lock up and always give me the same coloured graphical artifacts all over the screen. Whether I use a CD-ROM or a USB Stick, it does not change a thing. Is there anything else that can be done or am I stuck for now?

  Read the article

• "Enterprise Architectures for Drupal" at DrupalCon

  - by christopher.jones

  Scott Mattoon from Oracle will be presenting Enterprise Architecture for Drupal early tomorrow at DrupalCon. Scott is a long time member of the Drupal community. He recently joined Oracle via the Sun acquisition - in case you're worried, he tells me that his talk is pretty much vendor neutral.

  Read the article

• More Maintenance Plan Weirdness

  - by AjarnMark

  I’m not a big fan of the built-in Maintenance Plan functionality in SQL Server.  I like the interface in SQL 2005 better than 2000 (it looks more like building an SSIS package) but it’s still a bit of a black box.  You don’t really know what commands are being run based on the selections you have made, and you can easily make some unwise choices without realizing it, such as shrinking your database on a regular basis.  I really prefer to know exactly what commands and with which options are being run on my servers. Recently I had another very strange thing happen with a Maintenance Plan, this time in SQL 2005, SP3.  I inherited this server and have done a bit of cleanup on it, but had not yet gotten around to replacing the Maintenance Plans with all my own scripts.  However, one of the maintenance plans which was just responsible for doing LOG backups was running more frequently than that system needed, and I thought I would just tweak the schedule a bit.  So I opened the Maintenance Plan and edited the properties of the Subplan, setting a new schedule, saved it and figured all was good to go.  But the next execution of the Scheduled Job that triggers the Maintenance Plan code failed with an error about the Owner of the job.  Specifically the error was, “Unable to determine if the owner (OldDomain\OldDBAUserID) of job MaintenancePlanName.Subplan has server access (reason: Could not obtain information about Windows NT group/user 'OldDomain\OldDBAUserID’..”  I was really confused because I had previously updated all of the jobs to have current accounts as the owners.  At first I thought it was just a fluke, but it happened on the next scheduled cycle so I investigated further and sure enough, that job had the old DBA’s account listed as the owner.  I fixed it and the job successfully ran to completion. Now, I don’t really like mysteries like that, so I did some more testing and verified that, sure enough, just editing the Subplan schedule and saving the Maintenance Job caused the Scheduled Job to be recreated with the old credentials.  I don’t know where it is getting those credentials, but I can only assume that it is the same as the original creator of the Maintenance Plan, and for some reason it insists on using that ID for the job owner.  I looked through the options in SSMA and could not find anything would let me easily set the value that I wanted it to use.  I suspect that if I did something like executing sp_changeobjectowner against the Maintenance Plan that it would use that new ID instead.  I’m sure that there is good reason that it works this way, but rather than mess around with it much more, I’m just going to spend my time rolling out my replacement scripts instead. Chalk this little hidden oddity up as yet one more reason I’m not a fan of Maintenance Plans.

  Read the article

• Best way to implement a simple bullet trajectory

  - by AirieFenix

  I searched and searched and although it's a fair simple question, I don't find the proper answer but general ideas (which I already have). I have a top-down game and I want to implement a gun which shoots bullets that follow a simple path (no physics nor change of trajectory, just go from A to B thing). a: vector of the position of the gun/player. b: vector of the mouse position (cross-hair). w: the vector of the bullet's trajectory. So, w=b-a. And the position of the bullet = [x=x0+speed*time*normalized w.x , y=y0+speed*time * normalized w.y]. I have the constructor: public Shot(int shipX, int shipY, int mouseX, int mouseY) { //I get mouse with Gdx.input.getX()/getY() ... this.shotTime = TimeUtils.millis(); this.posX = shipX; this.posY = shipY; //I used aVector = aVector.nor() here before but for some reason didn't work float tmp = (float) (Math.pow(mouseX-shipX, 2) + Math.pow(mouseY-shipY, 2)); tmp = (float) Math.sqrt(Math.abs(tmp)); this.vecX = (mouseX-shipX)/tmp; this.vecY = (mouseY-shipY)/tmp; } And here I update the position and draw the shot: public void drawShot(SpriteBatch batch) { this.lifeTime = TimeUtils.millis() - this.shotTime; //position = positionBefore + v*t this.posX = this.posX + this.vecX*this.lifeTime*speed*Gdx.graphics.getDeltaTime(); this.posY = this.posY + this.vecY*this.lifeTime*speed*Gdx.graphics.getDeltaTime(); ... } Now, the behavior of the bullet seems very awkward, not going exactly where my mouse is (it's like the mouse is 30px off) and with a random speed. I know I probably need to open the old algebra book from college but I'd like somebody says if I'm in the right direction (or points me to it); if it's a calculation problem, a code problem or both. Also, is it possible that Gdx.input.getX() gives me non-precise position? Because when I draw the cross-hair it also draws off the cursor position. Sorry for the long post and sorry if it's a very basic question. Thanks!

  Read the article

• Is it okay to have people with multiple roles in a Scrum team?

  - by Wayne M

  I'm evaluating some Agile-style methodologies for possible introduction to my team. With Scrum, is it allowable to have the same person perform multiple roles? We have a small team of four developers and a web designer; we don't really have a lead (I fulfill this role), QA testers or business analysts, and all of our development tasks come from the CIO. Automated testing is seen as a total waste of time, and everything focuses on speed and not quality. What will happen is the CIO will come up with a development task (whether a feature or a bug) and give it to a developer (not to the whole team, to an individual, often in private or out of the blue) who is then expected to get it completed. The CIO doesn't gather requirements beyond the initial idea (and this has bitten us before as we'll implement something only to find out that none of the end users can use the feature, because they weren't consulted or even informed about it before we developed it, and in a panic we'll be told to revert the change) but requires say in/approval of everything that we do. First things first, is a Scrum style something to consider to introduce some standards and practices? From reading, Scrum seems to rely on a bit more trust and communication and focuses more on project management than on development, which is something we are completely devoid of as we don't have any semblance of project management at present. Second, if it can work is it unreasonable for someone, let's say myself, to act as both ScrumMaster and a developer? Or for a developer to also be the Product Owner (although chances are this will be the CIO, who isn't a developer)? I realize the Scrum Master and the Product Owner should be different people but at the same time I don't think we have anyone who has the qualities of a Product Owner (chances are it would turn into a "I need all these stories, I don't care how but get it done" type of deal and/or any freeze would be unfrozen on a whim). It seems to me that I might need to pick and choose pieces of Scrum/XP/Lean to compensate for how things are done currently, as it's highly unlikely that the mentality can be changed; for instance Pair Programming would never fly (seen as a waste, you get half the tasks done if you need two people for everything), TDD would be a hard sell, but short cycles would be welcomed.

  Read the article

• Why does ubuntu server switch to standby when using the xen kernel?

  - by WitchCraft

  Question: I have a Linux server, which runs Ubuntu 12.04. I installed Xen-server and paravirtualized an Ubuntu 12.10 as guest machine. Bridged the network, and so far, it worked fine (after much trial-and-error). The only problem left is, that since the host uses the xen-enabled kernel, it goes to standby after x amount of time. It didn't do that on the non-Xen kernel. How can I prevent the Xen-host from switching into standby mode ?

  Read the article

• Compiling for T4

  - by Darryl Gove

  I've recently had quite a few queries about compiling for T4 based systems. So it's probably a good time to review what I consider to be the best practices. Always use the latest compiler. Being in the compiler team, this is bound to be something I'd recommend But the serious points are that (a) Every release the tools get better and better, so you are going to be much more effective using the latest release (b) Every release we improve the generated code, so you will see things get better (c) Old releases cannot know about new hardware. Always use optimisation. You should use at least -O to get some amount of optimisation. -xO4 is typically even better as this will add within-file inlining. Always generate debug information, using -g. This allows the tools to attribute information to lines of source. This is particularly important when profiling an application. The default target of -xtarget=generic is often sufficient. This setting is designed to produce a binary that runs well across all supported platforms. If the binary is going to be deployed on only a subset of architectures, then it is possible to produce a binary that only uses the instructions supported on these architectures, which may lead to some performance gains. I've previously discussed which chips support which architectures, and I'd recommend that you take a look at the chart that goes with the discussion. Crossfile optimisation (-xipo) can be very useful - particularly when the hot source code is distributed across multiple source files. If you're allowed to have something as geeky as favourite compiler optimisations, then this is mine! Profile feedback (-xprofile=[collect: | use:]) will help the compiler make the best code layout decisions, and is particularly effective with crossfile optimisations. But what makes this optimisation really useful is that codes that are dominated by branch instructions don't typically improve much with "traditional" compiler optimisation, but often do respond well to being built with profile feedback. The macro flag -fast aims to provide a one-stop "give me a fast application" flag. This usually gives a best performing binary, but with a few caveats. It assumes the build platform is also the deployment platform, it enables floating point optimisations, and it makes some relatively weak assumptions about pointer aliasing. It's worth investigating. SPARC64 processor, T3, and T4 implement floating point multiply accumulate instructions. These can substantially improve floating point performance. To generate them the compiler needs the flag -fma=fused and also needs an architecture that supports the instruction (at least -xarch=sparcfmaf). The most critical advise is that anyone doing performance work should profile their application. I cannot overstate how important it is to look at where the time is going in order to determine what can be done to improve it. I also presented at Oracle OpenWorld on this topic, so it might be helpful to review those slides.

  Read the article

• Oracle's Sun Blade modular systems: Can they give VBlock a run for their money?

  - by llaszews

  Check out these new hardware and software integrated solutions from Oracle Sun (they are not Exa* machines): http://www.oracle.com/us/products/servers-storage/servers/blades/index.html They offer a number of solutions not offered by VBlock: Oracle DB, Oracle WebLogic, OS and end to end management. Be interesting to see how much adoption these machines get given the long time VBlock has been around and the Exa* focused strategy at Oracle.

  Read the article

• Don&amp;#146;t Bail on Your Business Blog

  Recent studies may have you thinking that it&#146;s time to give up the blog and focus on Twitter or Facebook. But don&#146;t be rash. Search engine optimization is a major benefit of keeping a business blog.

  Read the article

• How to implement explosion in OpenGL?

  - by Chan

  I'm relatively new to OpenGL and I'm clueless how to implement explosion. So could anyone give me some ideas how to start? Suppose the explosion occurs at location $(x, y, z)$, then I'm thinking of randomly generate a collection of vectors with $(x, y, z)$ as origin, then draw some particle (glutSolidCube) which move along this vector for some period of time, says after 1000 updates, it disappear. Is this approach feasible? A minimal example would be greatly appreciated.

  Read the article

• How to find out if my hosting's speed is good enough?

  - by Mert Nuhoglu

  There are lots of different online performance tests: Google PageSpeed Insights iWebTool Speed Test AlertFox Page Load Time WebPageTest Also there are several desktop/client software such as: ping tool YSlow Firebug's Net console Fiddler Http Watch I just want to decide if my hosting provider has a good enough performance or if I need to switch my hosting to another provider. So, which tool should I use to compare my hosting provider with other hosting providers?

  Read the article

• How to Set Up an Online Ecommerce Store

  Online Ecommerce stores are gaining popularity these days. Their business is achieving exceptional heights. The reason behind their success is the lack of time that people in the present world have. ... [Author: Anurag Gupta - Web Design and Development - May 11, 2010]

  Read the article

• Google Chrome Extensions: Launch Event (part 6)

  Google Chrome Extensions: Launch Event (part 6) Video Footage from the Google Chrome Extensions launch event on 12/09/09. Nick Baum, product manager for Google Chrome's extension system presents the gallery approval process, gives tips to extensions developers on how to make their extension successful and discusses the team's short term plans. From: GoogleDevelopers Views: 5659 17 ratings Time: 08:42 More in Science & Technology

  Read the article

• Oracle University New Courses (Week 14)

  - by swalker

  Oracle University released the following new (versions of) courses recently: Database Oracle Data Modeling and Relational Database Design (4 days) Fusion Middleware Oracle Directory Services 11g: Administration (5 days) Oracle Unified Directory 11g: Services Deployment Essentials (2 days) Oracle GoldenGate 11g Management Pack: Overview (1 day) Business Intelligence & Datawarehousing Oracle Database 11g: Data Mining Techniques (2 days) Oracle Solaris Oracle Solaris 10 System Administration for HP-UX Administrators (5 days) E-Business Suite R12.x Oracle Time and Labor Fundamentals Get in contact with your local Oracle University team for more details and course dates. Stay Connected to Oracle University: LinkedIn OracleMix Twitter Facebook Google+

  Read the article

• Find version of development library from command line?

  - by mathematician1975

  I installed the c++ boost development libraries using Ubuntu software centre. The problem is that it was quite a long time ago and I cannot remember where they are installed nor what version they were. Is there anything I can do from the command line that will tell me what version(s) I have installed on my system?? I know I can do things like gcc -v to get version of an application but is there a similar thing available for libraries? I am using ubuntu 12.04

  Read the article

• Google I/O 2012 - New Low-Level Media APIs in Android

  Google I/O 2012 - New Low-Level Media APIs in Android Dave Burke Jellybean introduces a new set of powerful low-level media APIs that provide developers with the ability to access hardware codecs directly from Java. This session introduces the new APIs with examples. For all I/O 2012 sessions, go to developers.google.com From: GoogleDevelopers Views: 0 0 ratings Time: 01:05:50 More in Science & Technology

  Read the article

• PSD to WordPress

  This task is very time consuming and hectic but you have to do it for the development of your website. That';s why the demand for converting the PSD file to WordPress has become so popular and it also... [Author: Mahendra Sharma - Web Design and Development - May 25, 2010]

  Read the article

• Atheros AR928X wireless connection makes neighbourhood machine drop off line

  - by funicorn

  I have an Acer laptop with Atheros AR928X wireless card installed, supported by ath9k driver in the linux kernel. There are other 5 computers sharing wireless connection via a TPLink 150Mbit/s wireless router. At first I found the network is a little bit slower than it's in Windows7, which I accepted as it should be. However a very strange thing is, each time I connected to the router and downloaded stuff for a while, one of the computers running Windows7 in my local network dropped off from the router. And if I run my laptop under Windows7, everything is fine. What's even stranger is although the network becomes slower, only the certain computer drops and totally freezes in connection with the router. I'm not willing to conclude it's due to the unhealthy connection from my laptop to the router, however we have confirmed this for more than one times and there is no problem with the network when I'm running WIndows7. I'm extremely confused about what's going on. As a Linux user running Ubuntu over 5 years, I am awared that wireless driver in Linux is badly notorious of lack of stability and slow speed. But is it so bad that the unhealthy wireless connection can do damage to another computer in the same local network? I do see a lot of "Tx excessive retries" in iwconfig output. But how exactly does this happen ? Thanks for your help. I guess I have to use this answer box to show the outputs $ sudo iwconfig wlan0 IEEE 802.11bgn ESSID:"TP-LINK111" Mode:Managed Frequency:2.427 GHz Access Point: E0:05:C5:E8:A9:92 Bit Rate=121.5 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=47/70 Signal level=-63 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:2 Invalid misc:23 Missed beacon:0 To show what's wrong with the wireless connection, I ran iwconfig again within 3 minutes, during which time I hardly did anything and the network was not much busy than being nearly idle $ sudo iwconfig wlan0 IEEE 802.11bgn ESSID:"TP-LINK111" Mode:Managed Frequency:2.427 GHz Access Point: E0:05:C5:E8:A9:92 Bit Rate=121.5 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=48/70 Signal level=-62 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:9 Invalid misc:28 Missed beacon:0 You can see Tx excessive retires and Invalid misc increase very quickly. $ sudo iwlist wlan0 modu wlan0 unknown modulation information. $ sudo iwlist wlan0 channel wlan0 13 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz Current Frequency:2.427 GHz (Channel 4)

  Read the article

• I'd like to switch from 32-bit to 64-bit within same version

  - by Marty Fried

  I have a 32-bit installation of 11.10 on my 64-bit (4 GB) home AMD system. I have recently read up a bit on 64-bit version, and it seems that it would be a marginally better choice now for me. I have read about several methods to help reinstall all the various apps, using either dpkg's get-selections/set-selections and dselect in various ways, or using synaptic's save/get markings. The problem here is that I've read several variations, and I'm not sure which is best. I have enough disk space to do this with a brand new partition, so I'm not too worried about destroying anything, but I don't really want to make it my life's work, hence my appeal for expert tips. Since it's the same version, would it be safe to copy configuration files from the 32-bit system? I'd guess my home directory and /etc might be enough, and would save at least most of the time to reconfigure. But are there difference in configuration files in either of these directories for 32 vs 64 bits that might cause problems? After reinstalling to 64-bit, I can then continue along the 64 bit path for upgrades, but I thought it would be easier to switch the same version, than to try to reinstall apps and upgrade at the same time. Some methods I've seen suggested, among others: A. From Ubuntu forums On your old system (assuming it is still working), start up Synaptic and go: File->Save Markings and choose a file name along with a location (like a USB drive) that you can use when you have installed your new system). You need to check on the bottom: "Save full state, not only changes" This file contains a list of all your currently installed packages, and when you have installed and booted up your new system (and configured your repositories to the best for your location - as we all do, don't we?) then start up Synaptic and go: File-Read Markings and point it at your saved file, and after that has completed then select Apply to kick off the download & installation of all of those packages you had installed previously! B. From the same discussion: According to section 6.4.9 of the Debian Reference Manual, the following will save both the list of packages installed and their debconf configuration: # dpkg --get-selections "*" >myselections # or use \* # debconf-get-selections > debconfsel.txt and the following will reinstall and reconfigure them: # dselect update # debconf-set-selections < debconfsel.txt # dpkg --set-selections <myselections # apt-get -u dselect-upgrade # or dselect install C. A variation on the above I've seen a lot, this from stackoverflow: dpkg --get-selections > package_list then on the new install: cat package_list | sudo dpkg --set-selections && sudo apt-get dselect-upgrade I don't really understand B, or why it's slightly different than many others.

  Read the article

• .Net Application & Database Modularity/Reuse

  - by Martaver

  I'm looking for some guidance on how to architect an app with regards to modularity, separation of concerns and re-usability. I'm working on an application (ASP.Net, C#) that has distinctly generic chunks of functionality, that I'd love to be able to lift out, all layers, into re-usable components. This means the module handles the database schema, data access, API, everything so that the next time I want to use it I can just register the module and hook into it. Developing modules of re-usable functionality is a no-brainer, but what is really confusing me is what to do when it comes to handling a core re-usable database schema that serves the module's functionality. In an ideal world, I would register a module and it would ensure that the associated database schema exists in the DB. I would code on the assumption that the tables exist, calling the module's functionality through the DLL, agnostic of the database layer. Kind of like Enterprise Library's Caching/Logging Application Block, which can create a DB schema in the target DB to use as a data store. My Questions is: What do you think is the best way to achieve this, firstly, in terms design architecture, and secondly solution structure. What patterns/frameworks do you know that exist & support this kind of thing? My thoughts so far: I mostly use Entity Framework and SQL Server DB Projects. I thought about a 'black box' approach to modules of functionality. I could use use a code-first approach in EF4, and use the ObjectContext to create a database when the module is initialized. However this means that all of the entities that my module encapsulates would be disconnected from the rest of the application because they belonged to an abstracted ObjectContext. Further - Creating appropriate indexes and references between domain entities and the module's entities would be impossible to do practically. I've thought of adopting Enterprise Library and creating my own Application Blocks. I'm not sure how this would play nice with Entity Framework (if at all) though. I like the idea of building on proven patterns & practices to encapsulate established, reusable functionality. I thought of abandoning Entity Framework for the Module, and just creating a separate DB schema for the module with its own set of stored procedures & ADO.Net. Then deploying the script at run-time if interrogation shows that it doesn't exist. But once again, for application developing outside of the application, I would want to use Entity Framework and I would have to use the module separately, disconnected from the domain ObjectContext. Has anyone had experience developing these sorts of full-stack modules? What advice can you offer? Am I biting off more than I can chew?

  Read the article

• Google I/O 2012 - New YouTube Android Player Tools

  Google I/O 2012 - New YouTube Android Player Tools Ross McIlroy, Anton Hansson If you are building Android smartphone, tablet or Google TV applications and want to incorporate high-quality YouTube video playback in your product this session will rock your world. For all I/O 2012 sessions, go to developers.google.com From: GoogleDevelopers Views: 1719 24 ratings Time: 51:10 More in Science & Technology

  Read the article

< Previous Page | 637 638 639 640 641 642 643 644 645 646 647 648  | Next Page >