Search Results

Search found 17924 results on 717 pages for 'order by'.

Page 643/717 | < Previous Page | 639 640 641 642 643 644 645 646 647 648 649 650  | Next Page >

• How to Increase the VMWare Boot Screen Delay

  - by Trevor Bekolay

  If you’ve wanted to try out a bootable CD or USB flash drive in a virtual machine environment, you’ve probably noticed that VMWare’s offerings make it difficult to change the boot device. We’ll show you how to change these options. You can do this either for one boot, or permanently for a particular virtual machine. Even experienced users of VMWare Player or Workstation may not recognize the screen above – it’s the virtual machine’s BIOS, which in most cases flashes by in the blink of an eye. If you want to boot up the virtual machine with a CD or USB key instead of the hard drive, then you’ll need more than an eye’s-blink to press Escape and bring up the Boot Menu. Fortunately, there is a way to introduce a boot delay that isn’t exposed in VMWare’s graphical interface – you have to edit the virtual machine’s settings file (a .vmx file) manually. Editing the Virtual Machine’s .vmx Find the .vmx file that contains the settings for your virtual machine. You chose a location for this when you created the virtual machine – in Windows, the default location is a folder called My Virtual Machines in your My Documents folder. In VMWare Workstation, the location of the .vmx file is listed on the virtual machine’s tab. If in doubt, search your hard drive for .vmx files. If you don’t want to use Windows default search, an awesome utility that locates files instantly is Everything. Open the .vmx file with any text editor. Somewhere in this file, enter in the following line… save the file, then close out of the text editor: bios.bootdelay = 20000 This will introduce a 20 second delay when the virtual machine loads up, giving you plenty of time to press the Escape button and access the boot menu. The number in this line is just a value in milliseconds, so for a five second boot delay, enter 5000, and so on. Change Boot Options Temporarily Now, when you boot up your virtual machine, you’ll have plenty of time to enter one of the keystrokes listed at the bottom of the BIOS screen on boot-up. Press Escape to bring up the Boot Menu. This allows you to select a different device to boot from – like a CD drive. Your selection will be forgotten the next time you boot up this virtual machine. Change Boot Options Permanently When the BIOS screen comes up, press F2 to enter the BIOS Setup menu. Switch to the Boot tab, and change the ordering of the items by pressing the “+” key to move items up on the list, and the “-” key to move items down the list. We’ve switched the order so that the CD-ROM Drive boots first. Once you make this change permanent, you may want to re-edit the .vmx file to remove the boot delay. Boot from a USB Flash Drive One thing that is noticeably missing from the list of boot options is a USB device. VMWare’s BIOS just does not allow this, but we can get around that limitation using the PLoP Boot Manager that we’ve previously written about. And as a bonus, since everything is virtual anyway, there’s no need to actually burn PLoP to a CD. Open the settings for the virtual machine you want to boot with a USB drive. Click on Add… at the bottom of the settings screen, and select CD/DVD Drive. Click Next. Click the Use ISO Image radio button, and click Next. Browse to find plpbt.iso or plpbtnoemul.iso from the PLoP zip file. Ensure that Connect at power on is checked, and then click Finish. Click OK on the main Virtual Machine Settings page. Now, if you use the steps above to boot using that CD/DVD drive, PLoP will load, allowing you to boot from a USB drive! Conclusion We’re big fans of VMWare Player and Workstation, as they let us try out a ton of geeky things without worrying about harming our systems. By introducing a boot delay, we can add bootable CDs and USB drives to the list of geeky things we can try out. Download PLoP Boot Manager Similar Articles Productive Geek Tips How To Switch to Console Mode for Ubuntu VMware GuestHack: Turn Off Debug Mode in VMWare Workstation 6 BetaStart Your Computer More Quickly by Delaying the Startup of a Service in VistaEnable Hidden BootScreen in Windows VistaEnable Copy and Paste from Ubuntu VMware Guest TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error

  Read the article

• Talking JavaOne with Rock Star Martijn Verburg

  - by Janice J. Heiss

  JavaOne Rock Stars, conceived in 2005, are the top-rated speakers at each JavaOne Conference. They are awarded by their peers, who, through conference surveys, recognize them for their outstanding sessions and speaking ability. Over the years many of the world’s leading Java developers have been so recognized. Martijn Verburg has, in recent years, established himself as an important mover and shaker in the Java community. His “Diabolical Developer” session at the JavaOne 2011 Conference got people’s attention by identifying some of the worst practices Java developers are prone to engage in. Among other things, he is co-leader and organizer of the thriving London Java User Group (JUG) which has more than 2,500 members, co-represents the London JUG on the Executive Committee of the Java Community Process, and leads the global effort for the Java User Group “Adopt a JSR” and “Adopt OpenJDK” programs. Career highlights include overhauling technology stacks and SDLC practices at Mizuho International, mentoring Oracle on technical community management, and running off shore development teams for AIG. He is currently CTO at jClarity, a start-up focusing on automating optimization for Java/JVM related technologies, and Product Advisor at ZeroTurnaround. He co-authored, with Ben Evans, "The Well-Grounded Java Developer" published by Manning and, as a leading authority on technical team optimization, he is in high demand at major software conferences.Verburg is participating in five sessions, a busy man indeed. Here they are: CON6152 - Modern Software Development Antipatterns (with Ben Evans) UGF10434 - JCP and OpenJDK: Using the JUGs’ “Adopt” Programs in Your Group (with Csaba Toth) BOF4047 - OpenJDK Building and Testing: Case Study—Java User Group OpenJDK Bugathon (with Ben Evans and Cecilia Borg) BOF6283 - 101 Ways to Improve Java: Why Developer Participation Matters (with Bruno Souza and Heather Vancura-Chilson) HOL6500 - Finding and Solving Java Deadlocks (with Heinz Kabutz, Kirk Pepperdine, Ellen Kraffmiller and Henri Tremblay) When I asked Verburg about the biggest mistakes Java developers tend to make, he listed three: A lack of communication -- Software development is far more a social activity than a technical one; most projects fail because of communication issues and social dynamics, not because of a bad technical decision. Sadly, many developers never learn this lesson. No source control -- Developers simply storing code in local filesystems and emailing code in order to integrate Design-driven Design -- The need for some developers to cram every design pattern from the Gang of Four (GoF) book into their source code All of which raises the question: If these practices are so bad, why do developers engage in them? “I've seen a wide gamut of reasons,” said Verburg, who lists them as: * They were never taught at high school/university that their bad habits were harmful.* They weren't mentored in their first professional roles.* They've lost passion for their craft.* They're being deliberately malicious!* They think software development is a technical activity and not a social one.* They think that they'll be able to tidy it up later.A couple of key confusions and misconceptions beset Java developers, according to Verburg. “With Java and the JVM in particular I've seen a couple of trends,” he remarked. “One is that developers think that the JVM is a magic box that will clean up their memory, make their code run fast, as well as make them cups of coffee. The JVM does help in a lot of cases, but bad code can and will still lead to terrible results! The other trend is to try and force Java (the language) to do something it's not very good at, such as rapid web development. So you get a proliferation of overly complex frameworks, libraries and techniques trying to get around the fact that Java is a monolithic, statically typed, compiled, OO environment. It's not a Golden Hammer!”I asked him about the keys to running a good Java User Group. “You need to have a ‘Why,’” he observed. “Many user groups know what they do (typically, events) and how they do it (the logistics), but what really drives users to join your group and to stay is to give them a purpose. For example, within the LJC we constantly talk about the ‘Why,’ which in our case is several whys:* Re-ignite the passion that developers have for their craft* Raise the bar of Java developers in London* We want developers to have a voice in deciding the future of Java* We want to inspire the next generation of tech leaders* To bring the disparate tech groups in London together* So we could learn from each other* We believe that the Java ecosystem forms a cornerstone of our society today -- we want to protect that for the futureLooking ahead to Java 8 Verburg expressed excitement about Lambdas. “I cannot wait for Lambdas,” he enthused. “Brian Goetz and his group are doing a great job, especially given some of the backwards compatibility that they have to maintain. It's going to remove a lot of boiler plate and yet maintain readability, plus enable massive scaling.”Check out Martijn Verburg at JavaOne if you get a chance, and, stay tuned for a longer interview yours truly did with Martijn to be publish on otn/java some time after JavaOne. Originally published on blogs.oracle.com/javaone.

  Read the article

• Talking JavaOne with Rock Star Martijn Verburg

  - by Janice J. Heiss

  JavaOne Rock Stars, conceived in 2005, are the top-rated speakers at each JavaOne Conference. They are awarded by their peers, who, through conference surveys, recognize them for their outstanding sessions and speaking ability. Over the years many of the world’s leading Java developers have been so recognized. Martijn Verburg has, in recent years, established himself as an important mover and shaker in the Java community. His “Diabolical Developer” session at the JavaOne 2011 Conference got people’s attention by identifying some of the worst practices Java developers are prone to engage in. Among other things, he is co-leader and organizer of the thriving London Java User Group (JUG) which has more than 2,500 members, co-represents the London JUG on the Executive Committee of the Java Community Process, and leads the global effort for the Java User Group “Adopt a JSR” and “Adopt OpenJDK” programs. Career highlights include overhauling technology stacks and SDLC practices at Mizuho International, mentoring Oracle on technical community management, and running off shore development teams for AIG. He is currently CTO at jClarity, a start-up focusing on automating optimization for Java/JVM related technologies, and Product Advisor at ZeroTurnaround. He co-authored, with Ben Evans, "The Well-Grounded Java Developer" published by Manning and, as a leading authority on technical team optimization, he is in high demand at major software conferences.Verburg is participating in five sessions, a busy man indeed. Here they are: CON6152 - Modern Software Development Antipatterns (with Ben Evans) UGF10434 - JCP and OpenJDK: Using the JUGs’ “Adopt” Programs in Your Group (with Csaba Toth) BOF4047 - OpenJDK Building and Testing: Case Study—Java User Group OpenJDK Bugathon (with Ben Evans and Cecilia Borg) BOF6283 - 101 Ways to Improve Java: Why Developer Participation Matters (with Bruno Souza and Heather Vancura-Chilson) HOL6500 - Finding and Solving Java Deadlocks (with Heinz Kabutz, Kirk Pepperdine, Ellen Kraffmiller and Henri Tremblay) When I asked Verburg about the biggest mistakes Java developers tend to make, he listed three: A lack of communication -- Software development is far more a social activity than a technical one; most projects fail because of communication issues and social dynamics, not because of a bad technical decision. Sadly, many developers never learn this lesson. No source control -- Developers simply storing code in local filesystems and emailing code in order to integrate Design-driven Design -- The need for some developers to cram every design pattern from the Gang of Four (GoF) book into their source code All of which raises the question: If these practices are so bad, why do developers engage in them? “I've seen a wide gamut of reasons,” said Verburg, who lists them as: * They were never taught at high school/university that their bad habits were harmful.* They weren't mentored in their first professional roles.* They've lost passion for their craft.* They're being deliberately malicious!* They think software development is a technical activity and not a social one.* They think that they'll be able to tidy it up later.A couple of key confusions and misconceptions beset Java developers, according to Verburg. “With Java and the JVM in particular I've seen a couple of trends,” he remarked. “One is that developers think that the JVM is a magic box that will clean up their memory, make their code run fast, as well as make them cups of coffee. The JVM does help in a lot of cases, but bad code can and will still lead to terrible results! The other trend is to try and force Java (the language) to do something it's not very good at, such as rapid web development. So you get a proliferation of overly complex frameworks, libraries and techniques trying to get around the fact that Java is a monolithic, statically typed, compiled, OO environment. It's not a Golden Hammer!”I asked him about the keys to running a good Java User Group. “You need to have a ‘Why,’” he observed. “Many user groups know what they do (typically, events) and how they do it (the logistics), but what really drives users to join your group and to stay is to give them a purpose. For example, within the LJC we constantly talk about the ‘Why,’ which in our case is several whys:* Re-ignite the passion that developers have for their craft* Raise the bar of Java developers in London* We want developers to have a voice in deciding the future of Java* We want to inspire the next generation of tech leaders* To bring the disparate tech groups in London together* So we could learn from each other* We believe that the Java ecosystem forms a cornerstone of our society today -- we want to protect that for the futureLooking ahead to Java 8 Verburg expressed excitement about Lambdas. “I cannot wait for Lambdas,” he enthused. “Brian Goetz and his group are doing a great job, especially given some of the backwards compatibility that they have to maintain. It's going to remove a lot of boiler plate and yet maintain readability, plus enable massive scaling.”Check out Martijn Verburg at JavaOne if you get a chance, and, stay tuned for a longer interview yours truly did with Martijn to be publish on otn/java some time after JavaOne.

  Read the article

• Geocaching - World wide treasure hunt

  I'm not quite sure how I came across this topic but actually I find it absolutely interesting, challenging and most of all a great fun for the family and friends. The interesting part is for sure that you can follow other peoples treasures and their preferred locations where a cache might be hidden. Of course, it wont be easy to find a cache after all. Sometimes there are even 'mystery caches' which have either riddles, further instructions or little brain games for you in order to find the actual cache - that's the challenge. And last but not least, those caches are hidden outdoor. A great experience to explore nature either on your own, or your family especially with children, or as a treasure hunting pack with a couple of friends. What is geocaching? It's a high-tech outdoor treasure hunting game that's a great way to explore the world with friends, family or on your own. Participants use GPS-enabled devices to locate hidden containers called geocaches. There are over one million geocaches hidden around the world today, waiting for you to find them. Visit Geocaching.com to search for geocaches near you.(Source: Referral Email of geocaching.com) Checkout the Geocaching 101 for further details and information. They also provide a video channel on YouTube. Which equipment do I need? Any GPS-enabled device is sufficient to go onto the hunt. I'm going to start our geocaching experience equipped with my Samsung Galaxy Tab. Additionally, I installed a geocaching.com client called c:geo that hopefully assists me soon. Combined with a map app like Google Maps and a nice Compass app you should be fully equipped and ready to go. I guess, that even a car navigation system is perfect for that task. Later on, with more experience and demand for technology (or precision) it might be interesting to opt-in for a pure GPS device, like a Garmin or any other brand on the market. {loadposition content_adsense} What is a geocache and what does it contain? In its simplest form, a cache always contains a logbook or logsheet for you to log your find. Larger caches may contain a logbook and any number of items. These items turn the adventure into a true treasure hunt. You never know what the cache owner or visitors to the cache may have left for you to enjoy. Remember, if you take something, leave something of equal or greater value in return. It is recommended that items in a cache be individually packaged in a clear, zipped plastic bag to protect them from the elements. Finding your first geocache Well, first you have to have interest to pick up the challenge. Then you have to check out the Geocache directory on geocaching.com. They have recommendations for beginner's caches but you are free to choose any. Actually, we have a Mystery Cache very close to our base, and I guess that we are going for that one on our first trip. Anyway, there is a very informative guide on the website which should answer all your questions about starting your new outdoor adventure. For sure, it's going to be rewarding. Team up with friends and family Especially as a beginner there might be misunderstandings in handling the GPS coordinates, the compass, or the map, and even finding the container at the documented position isn't easy in the first place. Luckily, there are logbook reports online from other hunters, and most of the time there are even 'spoiler' images available. But also bear in mind, that a geocache might have been removed or is lost due to unconscious people or whatever other reasons. Don't be disappointed in case that you can't find anything... There be nothing anymore. A general recommendation in this case would be to replace the missing container with a new one, and give feedback to the original owner about the state of that particular location. After all, it's about fun and active participation in a world-wide community. Geocaches in Mauritius? Yes, there are currently about 45 geocaches spread all over the island, and even a single in Rodriguez - that's gonna be a tough one. Hopefully, we will get increasing numbers as Geocaching.com allows, no better, even encourages you to hide new containers at your locations of choice. I think this is going to be real fun for us during the upcoming weeks and months. Especially, when we are travelling to other countries and transfer so-called trackable items between geocaches. On my first impression, Geocaching.com seems to be very mature, open and community-oriented. There are literally hundreds of thousands geocache 'hunters' all over the world. And usually finding a container remote from your home is very rewarding. I'll keep you updated in these matters during the next months to come...

  Read the article

• To ref or not to ref

  - by nmarun

  So the question is what is the point of passing a reference type along with the ref keyword? I have an Employee class as below: 1: public class Employee 2: { 3: public string FirstName { get; set; } 4: public string LastName { get; set; } 5:  6: public override string ToString() 7: { 8: return string.Format("{0}-{1}", FirstName, LastName); 9: } 10: } In my calling class, I say: 1: class Program 2: { 3: static void Main() 4: { 5: Employee employee = new Employee 6: { 7: FirstName = "John", 8: LastName = "Doe" 9: }; 10: Console.WriteLine(employee); 11: CallSomeMethod(employee); 12: Console.WriteLine(employee); 13: } 14:  15: private static void CallSomeMethod(Employee employee) 16: { 17: employee.FirstName = "Smith"; 18: employee.LastName = "Doe"; 19: } 20: }   After having a look at the code, you’ll probably say, Well, an instance of a class gets passed as a reference, so any changes to the instance inside the CallSomeMethod, actually modifies the original object. Hence the output will be ‘John-Doe’ on the first call and ‘Smith-Doe’ on the second. And you’re right: So the question is what’s the use of passing this Employee parameter as a ref? 1: class Program 2: { 3: static void Main() 4: { 5: Employee employee = new Employee 6: { 7: FirstName = "John", 8: LastName = "Doe" 9: }; 10: Console.WriteLine(employee); 11: CallSomeMethod(ref employee); 12: Console.WriteLine(employee); 13: } 14:  15: private static void CallSomeMethod(ref Employee employee) 16: { 17: employee.FirstName = "Smith"; 18: employee.LastName = "Doe"; 19: } 20: } The output is still the same: Ok, so is there really a need to pass a reference type using the ref keyword? I’ll remove the ‘ref’ keyword and make one more change to the CallSomeMethod method. 1: class Program 2: { 3: static void Main() 4: { 5: Employee employee = new Employee 6: { 7: FirstName = "John", 8: LastName = "Doe" 9: }; 10: Console.WriteLine(employee); 11: CallSomeMethod(employee); 12: Console.WriteLine(employee); 13: } 14:  15: private static void CallSomeMethod(Employee employee) 16: { 17: employee = new Employee 18: { 19: FirstName = "Smith", 20: LastName = "John" 21: }; 22: } 23: } In line 17 you’ll see I’ve ‘new’d up the incoming Employee parameter and then set its properties to new values. The output tells me that the original instance of the Employee class does not change. Huh? But an instance of a class gets passed by reference, so why did the values not change on the original instance or how do I keep the two instances in-sync all the times? Aah, now here’s the answer. In order to keep the objects in sync, you pass them using the ‘ref’ keyword. 1: class Program 2: { 3: static void Main() 4: { 5: Employee employee = new Employee 6: { 7: FirstName = "John", 8: LastName = "Doe" 9: }; 10: Console.WriteLine(employee); 11: CallSomeMethod(ref employee); 12: Console.WriteLine(employee); 13: } 14:  15: private static void CallSomeMethod(ref Employee employee) 16: { 17: employee = new Employee 18: { 19: FirstName = "Smith", 20: LastName = "John" 21: }; 22: } 23: } Viola! Now, to prove it beyond doubt, I said, let me try with another reference type: string. 1: class Program 2: { 3: static void Main() 4: { 5: string name = "abc"; 6: Console.WriteLine(name); 7: CallSomeMethod(ref name); 8: Console.WriteLine(name); 9: } 10:  11: private static void CallSomeMethod(ref string name) 12: { 13: name = "def"; 14: } 15: } The output was as expected, first ‘abc’ and then ‘def’ - proves the 'ref' keyword works here as well. Now, what if I remove the ‘ref’ keyword? The output should still be the same as the above right, since string is a reference type? 1: class Program 2: { 3: static void Main() 4: { 5: string name = "abc"; 6: Console.WriteLine(name); 7: CallSomeMethod(name); 8: Console.WriteLine(name); 9: } 10:  11: private static void CallSomeMethod(string name) 12: { 13: name = "def"; 14: } 15: } Wrong, the output shows ‘abc’ printed twice. Wait a minute… now how could this be? This is because string is an immutable type. This means that any time you modify an instance of string, new memory address is allocated to the instance. The effect is similar to ‘new’ing up the Employee instance inside the CallSomeMethod in the absence of the ‘ref’ keyword. Verdict: ref key came to the rescue and saved the planet… again!

  Read the article

• Review of ComponentOne Silverlight Controls (Free License Giveaway).

  - by mbcrump

  ComponentOne has several great products that target Silverlight Developers. One of them is their Silverlight Controls and the other is the XAP Optimizer. I decided that I would check out the controls and Xap Optimizer and feature them on my blog. After talking with ComponentOne, they agreed to take part in my Monthly Silverlight giveaway. The details are listed below: ----------------------------------------------------------------------------------------------------------------------------------------------------------- Win a FREE developer’s license of ComponentOne Silverlight Controls + XAP Optimizer! (the winner also gets a license to Silverlight Spy) Random winner will be announced on March 1st, 2011! To be entered into the contest do the following things: Subscribe to my feed. Leave a comment below with a valid email account (I WILL NOT share this info with anyone.) Retweet the following : I just entered to win free #Silverlight controls from @mbcrump and @ComponentOne http://mcrump.me/fTSmB8 ! Don’t change the URL because this will allow me to track the users that Tweet this page. Don’t forget to visit ComponentOne because they made this possible. MichaelCrump.Net provides Silverlight Giveaways every month. You can also see the latest giveaway by bookmarking http://giveaways.michaelcrump.net . ---------------------------------------------------------------------------------------------------------------------------------------------------------- Before we get started with the Silverlight Controls, here is a couple of links to bookmark: The Live Demos of the Silverlight Controls is located here. The XAP Optimizer page is here. One thing that I liked about the help documentation is that you can grab a PDF that only contains documentation for that control. This allows you to get the information you need without going through several hundred pages. You can also download the full documentation from their site.  ComponentOne Silverlight Controls I recently built a hobby project and decided to use ComponentOne Silverlight Controls. The main reason for this is that the controls are heavily documented, they look great and getting help was just a tweet or forum click away. So, the first question that you may ask is, “What is included?” Here is the official list below. I wanted to show several of the controls that I think developers will use the most. 1) ComponentOne’s Image Control – Display animated GIF images on your Silverlight pages as you would in traditional Web apps. Add attractive visuals with minimal effort. 2) HTML Host - Render HTML and arbitrary URI content from within Silverlight. 3) Chart3D - Create 3D surface charts with options for contour levels, zones, a chart legend and more. 4) PDFViewer - View PDF files in Silverlight! That is just a fraction of the controls available. If you want to check out several of them in a “real” application then check out my Silverlight page at http://michaelcrump.info. This brings me to the second part of the giveaway. XAP Optimizer – Is designed to reduce the size of your XAP File. It also includes built-in obfuscation and signing. With my personal project, I decided to use the XAP Optimizer by ComponentOne. It was so easy to use. You basically give it your .XAP file and it provides an output file. If you prefer to prune unused references manually then you can prune your XAP file manually by selecting the option below. I went ahead and added Obfuscation just to try it out and it worked great. You may notice from the screenshot below that I only obfuscated assemblies that I built. The other dlls anyone can grab off the net so we have no reason to obfuscate them. You also have the option to automatically sign your .xap with the SN.exe tool. So how did it turn out? Well, I reduced my XAP size from 2.4 to 1.8 with simply a click of a button. I added obfuscation with a click of a button: Screenshot of no obfuscation on my XAP File   Screenshot of obfuscation on my XAP File with XAP Optimizer.   So, with 2 button clicks, I reduce my XAP file and obfuscated my assembly. What else can you want? Well, they provide a nice HTML report that gives you an optimization summary. So what if you don’t want to launch this tool every time you deploy a Silverlight application? Well the official documentation provided a way to do it in your built event in Visual Studio. Click the Build Events tab on the left side of the Properties window. Enter the following command in the Post-build event command line: $Program Files\ComponentOne\XapOptimizer\XapOptimizer.exe /cmd /p:$(ProjectDir)$(ProjectName).xoproj In the end, this is a great product. I love code that I don’t have to write and utilities that just work. ComponentOne delivers with both the Silverlight Controls and the XAP Optimizer. Don’t forget to leave a comment below in order to win a set of the controls! Subscribe to my feed

  Read the article

• Using real fonts in HTML 5 & CSS 3 pages

  - by nikolaosk

  This is going to be the fifth post in a series of posts regarding HTML 5. You can find the other posts here, here , here and here.In this post I will provide a hands-on example on how to use real fonts in HTML 5 pages with the use of CSS 3.Font issues have been appearing in all websites and caused all sorts of problems for web designers.The real problem with fonts for web developers until now was that they were forced to use only a handful of fonts.CSS 3 allows web designers not to use only web-safe fonts.These fonts are in wide use in most user's operating systems.Some designers (when they wanted to make their site stand out) resorted in various techniques like using images instead of fonts. That solution is not very accessible-friendly and definitely less SEO friendly.CSS (through CSS3's Fonts module) 3 allows web developers to embed fonts directly on a web page.First we need to define the font and then attach the font to elements.Obviously we have various formats for fonts. Some are supported by all modern browsers and some are not.The most common formats are, Embedded OpenType (EOT),TrueType(TTF),OpenType(OTF). I will use the @font-face declaration to define the font used in this page.  Before you download fonts (in any format) make sure you have understood all the licensing issues. Please note that all these real fonts will be downloaded in the client's computer.A great resource on the web (maybe the best) is http://www.typekit.com/.They have an abundance of web fonts for use. Please note that they sell those fonts.Another free (best things in life a free, aren't they?) resource is the http://www.google.com/webfonts website. I have visited the website and downloaded the Aladin webfont.When you download any font you like make sure you read the license first. Aladin webfont is released under the Open Font License (OFL) license. Before I go on with the actual demo I will use the (http://www.caniuse.com) to see the support for web fonts from the latest versions of modern browsers.Please have a look at the picture below. We see that all the latest versions of modern browsers support this feature. In order to be absolutely clear this is not (and could not be) a detailed tutorial on HTML 5. There are other great resources for that.Navigate to the excellent interactive tutorials of W3School.Another excellent resource is HTML 5 Doctor.Two very nice sites that show you what features and specifications are implemented by various browsers and their versions are http://caniuse.com/ and http://html5test.com/. At this times Chrome seems to support most of HTML 5 specifications.Another excellent way to find out if the browser supports HTML 5 and CSS 3 features is to use the Javascript lightweight library Modernizr.In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here.I create a simple HTML 5 page. The markup follows and it is very easy to use and understand<!DOCTYPE html><html lang="en">  <head>    <title>HTML 5, CSS3 and JQuery</title>    <meta http-equiv="Content-Type" content="text/html;charset=utf-8" >    <link rel="stylesheet" type="text/css" href="style.css">       </head>  <body>      <div id="header">      <h1>Learn cutting edge technologies</h1>      <p>HTML 5, JQuery, CSS3</p>    </div>        <div id="main">          <h2>HTML 5</h2>                        <p>            HTML5 is the latest version of HTML and XHTML. The HTML standard defines a single language that can be written in HTML and XML. It attempts to solve issues found in previous iterations of HTML and addresses the needs of Web Applications, an area previously not adequately covered by HTML.          </p>      </div>             </body>  </html> Then I create the style.css file.<style type="text/css">@font-face{font-family:Aladin;src: url('Aladin-Regular.ttf')}h1{font-family:Aladin,Georgia,serif;}</style> As you can see we want to style the h1 tag in our HTML 5 markup.I just use the @font-face property,specifying the font-family and the source of the web font. Then I just use the name in the font-family property to style the h1 tag.Have a look below to see my page in IE10. Make sure you open this page in all your browsers installed in your machine. Make sure you have downloaded the latest versions. Now we can make our site stand out with web fonts and give it a really unique look and feel. Hope it helps!!!  

  Read the article

• Recent Innovations to ILOM

  - by B.Koch

  by Josh Rosen If you are wondering how Oracle can make some of the most advanced, reliable, and fault tolerant servers on the market, look no further than Oracle Integrated Lights Out Manager or ILOM.  We build ILOM into every server we create, from Oracle x86 Systems such as X3-2 to the SPARC T-Series family. Oracle ILOM is an embedded service processor, but it's really more than that.  It's a computer within a computer.  It's smart, it's tightly integrated into all aspects of the server's operation, and it's a big reason why Oracle servers are used for some of the most mission-critical workloads out there. To understand the value of ILOM, there is no better place to start than its fault management capability.  We have taken the sophisticated fault management architecture from Solaris, developed and refined over a decade, and built it into each and every ILOM. ILOM detects a potential issue at its earliest stage, watching low-level sensors.   If the root cause of a problem is not clear from a single error reading, ILOM will look for other clues and combine multiple pieces of information to correctly identify a failing component. ILOM provides peace of mind. We tailor our fault management for each new server platform that we produce.  You can rest assured that it's always actively keeping the server healthy.  And if there is a problem, you can be confident it will let you know by sending you a notification by e-mail or trap. We also heard IT managers tell us they needed a Ph.D. in computer engineering to manage today's servers. It doesn't have to be that way.  Thanks to the latest innovations to Oracle ILOM, we present hardware inventory and status in way that makes sense – to anyone.  Green means everything is healthy and red means something is wrong.  When a component needs to be replaced a clear message indicates where the problem is and points you at a knowledge article about that problem.  It's that simple. Simpler management and simple interfaces mean reduced complexity and lower costs to manage.  And we know that's really important. ILOM does all this while also providing advanced service processor features you depend on for managing enterprise class systems.  You can remotely control the server power, interact with a virtual video console for the server, and mount media on the server remotely.  There is no need to spend money on a KVM switch to get this functionality. And when people hear how advanced ILOM is, they can't believe ILOM is free.  All features are enabled and included with each Oracle server that you buy.  There are no advanced licenses you need to purchase or features to unlock. Configuring ILOM has also never been easier.  It is now possible to configure almost all aspects of the server directly from ILOM.  This includes changing BIOS settings, persistently modifying boot order, and optimizing power settings -- all directly from ILOM. But Oracle's innovation does not stop with ILOM.  Oracle has engineered Oracle Enterprise Manager Ops Center to integrate directly with ILOM, providing centralized management across all of our servers. Ops Center will discover each of your Oracle servers over the network by searching for ILOMs.  When it finds one, it knows how to communicate with ILOM to monitoring and configure that server from application to disk. Since every server that Oracle produces, from x86 Systems to SPARC T-Series up and down the line, comes with Oracle ILOM, you can manage all Oracle servers in the same way.  And while all of our servers may have different components on the inside, each with their specialized functions, the way you integrate them and the way you monitor and manage them is exactly the same. Oracle ILOM is state-of-art.  If you are looking for a server that make systems management simple and is easy to integrate and maintain, check out the latest advances to Oracle ILOM. Josh Rosen is a Principal Product Manager at Oracle and previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers.

  Read the article

• Optimizing collision engine bottleneck

  - by Vittorio Romeo

  Foreword: I'm aware that optimizing this bottleneck is not a necessity - the engine is already very fast. I, however, for fun and educational purposes, would love to find a way to make the engine even faster. I'm creating a general-purpose C++ 2D collision detection/response engine, with an emphasis on flexibility and speed. Here's a very basic diagram of its architecture: Basically, the main class is World, which owns (manages memory) of a ResolverBase*, a SpatialBase* and a vector<Body*>. SpatialBase is a pure virtual class which deals with broad-phase collision detection. ResolverBase is a pure virtual class which deals with collision resolution. The bodies communicate to the World::SpatialBase* with SpatialInfo objects, owned by the bodies themselves. There currenly is one spatial class: Grid : SpatialBase, which is a basic fixed 2D grid. It has it's own info class, GridInfo : SpatialInfo. Here's how its architecture looks: The Grid class owns a 2D array of Cell*. The Cell class contains two collection of (not owned) Body*: a vector<Body*> which contains all the bodies that are in the cell, and a map<int, vector<Body*>> which contains all the bodies that are in the cell, divided in groups. Bodies, in fact, have a groupId int that is used for collision groups. GridInfo objects also contain non-owning pointers to the cells the body is in. As I previously said, the engine is based on groups. Body::getGroups() returns a vector<int> of all the groups the body is part of. Body::getGroupsToCheck() returns a vector<int> of all the groups the body has to check collision against. Bodies can occupy more than a single cell. GridInfo always stores non-owning pointers to the occupied cells. After the bodies move, collision detection happens. We assume that all bodies are axis-aligned bounding boxes. How broad-phase collision detection works: Part 1: spatial info update For each Body body: Top-leftmost occupied cell and bottom-rightmost occupied cells are calculated. If they differ from the previous cells, body.gridInfo.cells is cleared, and filled with all the cells the body occupies (2D for loop from the top-leftmost cell to the bottom-rightmost cell). body is now guaranteed to know what cells it occupies. For a performance boost, it stores a pointer to every map<int, vector<Body*>> of every cell it occupies where the int is a group of body->getGroupsToCheck(). These pointers get stored in gridInfo->queries, which is simply a vector<map<int, vector<Body*>>*>. body is now guaranteed to have a pointer to every vector<Body*> of bodies of groups it needs to check collision against. These pointers are stored in gridInfo->queries. Part 2: actual collision checks For each Body body: body clears and fills a vector<Body*> bodiesToCheck, which contains all the bodies it needs to check against. Duplicates are avoided (bodies can belong to more than one group) by checking if bodiesToCheck already contains the body we're trying to add. const vector<Body*>& GridInfo::getBodiesToCheck() { bodiesToCheck.clear(); for(const auto& q : queries) for(const auto& b : *q) if(!contains(bodiesToCheck, b)) bodiesToCheck.push_back(b); return bodiesToCheck; } The GridInfo::getBodiesToCheck() method IS THE BOTTLENECK. The bodiesToCheck vector must be filled for every body update because bodies could have moved meanwhile. It also needs to prevent duplicate collision checks. The contains function simply checks if the vector already contains a body with std::find. Collision is checked and resolved for every body in bodiesToCheck. That's it. So, I've been trying to optimize this broad-phase collision detection for quite a while now. Every time I try something else than the current architecture/setup, something doesn't go as planned or I make assumption about the simulation that later are proven to be false. My question is: how can I optimize the broad-phase of my collision engine maintaining the grouped bodies approach? Is there some kind of magic C++ optimization that can be applied here? Can the architecture be redesigned in order to allow for more performance? Actual implementation: SSVSCollsion Body.h, Body.cpp World.h, World.cpp Grid.h, Grid.cpp Cell.h, Cell.cpp GridInfo.h, GridInfo.cpp

  Read the article

• Preview and Purchase Ebooks with Kindle for PC

  - by Matthew Guay

  Want to look over a new book, or buy it immediately in ebook format?  Here’s how you can preview and purchase most new books from your PC the easy way. Most new books, including almost all New York Times Bestsellers, are available in ebook format from Amazon’s Kindle store.  The Kindle store also includes numerous free ebooks, including out-of-print classics and a surprising amount of recent books.  With the free Kindle for PC reader, you can read any of these ebooks without having to purchase a Kindle device. Preview Ebooks Before you Purchase Sometimes, it can be hard to know if you want to purchase a new book without reading some of it first.  With Kindle for PC, however, you can download a sample of any ebook available for free.  The sample usually includes the table of contents, forward or introduction, and often part or all of the first chapter. To get an ebook sample, find the book you want in the Kindle store (link below). Now, under the Try it free box, select the correct computer or device to send the sample to, and click Send Sample now. Amazon will thank you for your order, even though this is only a free preview.  Click the Go to Kindle for PC button to open Kindle and read your ebook preview.   Or, if Kindle is already running, press the Refresh button in the top right corner to check for new ebooks and previews. Kindle will synchronize and download the previews you selected. The most recently downloaded items show up on the top left.  All sample books have a red “Sample” bar on the bottom of their cover, and they also include links to Buy or view more info about it on it’s cover.  Double-click your sample to start reading it. Your ebook sample will usually open at the introduction or beginning of the first chapter, but you can also view the index, cover, and more. When you reach the end of the sample book, you can click a link to buy the book or view more details about it.  Strangely, both of these links currently take you to the ebook’s page on Amazon.com, but perhaps in the future the Buy link will directly let you purchase the book. Or, you can also click Buy Now on a sample book directly from your Kindle library. If you clicked one of these links, you will be returned to the ebook’s page on Amazon.  Choose the PC or Kindle you want the book delivered to, and this time, select Buy Now with 1-Click. Add your payment info if you’re not already setup for 1-Click Shopping, and then you’ll be shown the same Thank you page as before.  Refresh Kindle for PC, and your new ebook will automatically download.  Strangely, the sample ebook is not automatically removed, so you can right-click on the sample and select Delete this Book.  Additionally, your last-read page in the sample is not synced to the purchased book, so you may have to find your place again. Now, enjoy your full ebook! Download Free Books for Kindle The Kindle Store has an amazing amount of free ebooks.  Some free books may only be free for a limited time as a promotion, while others, such as old classics, may always be free.  Either which way, once you download it, you can keep it forever. When you find a free ebook you want, select the Kindle or PC you want to download it to and click “Buy now with 1-Click”.  Notice that this book shows it’s price is $0.00, but the button still says Buy now.  Rest assured, if the book’s price show up as $0.00, you will not be charged anything for downloading it. Your ebook will download as usual after your next refresh.  Note that you can still download the sample first if you want, but since the book is free, just download the whole thing and delete it if you don’t want it. Redownload your Purchased or Free Books If you install Kindle on a new PC or delete a book from your library, you can always re-download it from your Amazon account.  Browse to the Manage your Kindle page on Amazon (link below) sign in with your Amazon account, and scroll down to the list of your purchased content. Select the book you wish to download, then choose the Kindle or PC you want to download it to and press Go. Note: There is a “Delete this title” button right below this.  If you press the Delete button, you will not ever be able to re-download it. Or, you can download the book directly from the Archived Items tab in Kindle on your other PC. And, if you have your Kindle content on multiple computers, your reading will be synced via Whispersync.  You can start reading on your desktop, and then resume where you left off from your laptop. Conclusion With these tips and tricks, it is much easier to preview and purchase new books, find and download free ebooks, and re-download any you’ve deleted from your PC.  Have fun filling up your digital library! Links Manage your Kindle account Similar Articles Productive Geek Tips Read Mobi eBooks on Kindle for PCRead Kindle Books On Your Computer with Kindle for PCHow to See Where a TinyUrl Is Really Linking ToEdit Microsoft Word 2007 Documents in Print PreviewWhy Can’t I Turn the Details/Preview Panes On or Off in Windows Vista Explorer? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides

  Read the article

• JQuery and the multiple date selector

  - by David Carter

  Overview I recently needed to build a web page that would allow a user to capture some information and most importantly select multiple dates. This functionality was core to the application and hence had to be easy and quick to do. This is a public facing website so it had to be intuitive and very responsive. On the face of it it didn't seem too hard, I know enough juery to know what it is capable of and I was pretty sure that there would be some plugins that would help speed things along the way. I'm using ASP.Net MVC for this project as I really like the control that it gives you over the generated html and javascript. After years of Web Forms development it makes me feel like a web developer again and puts a smile on my face, that can only be a good thing!   The Calendar The first item that I needed on this page was a calender and I wanted the ability to: have the calendar be always visible select/deselect multiple dates at the same time bind to the select/deselect event so that I could update a seperate listing of the selected dates allow the user to move to another month and still have the calender remember any dates in the previous month I was hoping that there was a jQuery plugin that would meet my requirements and luckily there was! The jQuery datepicker does everything I want and there is quite a bit of documentation on how to use it. It makes use of a javascript date library date.js which I had not come across before but has a number of very useful date utilities that I have used elsewhere in the project. As you can see from the image there still needs to be some styling done! But there will be plenty of time for that later. The calendar clearly shows which dates the user has selected in red and i also make use of an unordered list to show the the selected dates so the user can always clearly see what has been selected even if they move to another month on the calendar. The javascript code that is responsible for listening to events on the calendar and synchronising the list look as follows: <script type="text/javascript">     $(function () {         $('.datepicker').datePicker({ inline: true, selectMultiple: true })         .bind(             'dateSelected',             function (e, selectedDate, $td, state) {                                 var dateInMillisecs = selectedDate.valueOf();                 if (state) { //adding a date                     var newDate = new Date(selectedDate);                     //insert the new item into the correct place in the list                     var listitems = $('#dateList').children('li').get();                     var liToAdd = "<li id='" + dateInMillisecs + "' >" + newDate.toString('ddd dd MMM yyyy') + "</li>";                     var targetIndex = -1;                     for (var i = 0; i < listitems.length; i++) {                         if (dateInMillisecs <= listitems[i].id) {                             targetIndex = i;                             break;                         }                     }                     if (targetIndex < 0) {                         $('#dateList').append(liToAdd);                     }                     else {                         $($('#dateList').children("li")[targetIndex]).before(liToAdd);                     }                 }                 else {//removing a date                     $('ul #' + dateInMillisecs).remove();                 }             }         )     }); When a date is selected on the calendar a function is called with a number of parameters passed to it. The ones I am particularly interested in are selectedDate and state. State tells me whether the user has selected or deselected the date passed in the selectedDate parameter. The <ul> that I am using to show the date has an id of dateList and this is what I will be adding and removing <li> items from. To make things a little more logical for the user I decided that the date should be sorted in chronological order, this means that each time a new date is selected it need to be placed in the correct position in the list. One way to do this would be just to append a new <li> to the list and then sort the whole list. However the approach I took was to get an array of all the items in the list var listitems = ('#dateList').children('li').get(); and then check the value of each item in the array against my new date and as soon as I found the case where the new date was less than the current item remember that position in the list as this is where I would insert it later. To make this work easily I decided to store a numeric representation of each date in the list in the id attribute of each <li> element. Fortunately javascript natively stores dates as the number of milliseconds since 1 Jan 1970. var dateInMillisecs = selectedDate.valueOf(); Please note that this is the value of the date in UTC! I always like to store dates in UTC as I learnt a long time ago that it saves a lot of refactoring at a later date... When I convert the dates back to their original back on the server I will need the UTC offset that was used when calculating the dates, this and how to actually serialise the dates and get them posted back will be the subject of another post.

  Read the article

• Simple-Talk development: a quick history lesson

  - by Michael Williamson

  Up until a few months ago, Simple-Talk ran on a pure .NET stack, with IIS as the web server and SQL Server as the database. Unfortunately, the platform for the site hadn’t quite gotten the love and attention it deserved. On the one hand, in the words of our esteemed editor Tony “I’d consider the current platform to be a “success”; it cost $10K, has lasted for 6 years, was finished, end to end in 6 months, and although we moan about it has got us quite a long way.” On the other hand, it was becoming increasingly clear that it needed some serious work. Among other issues, we had authors that wouldn’t blog because our current blogging platform, Community Server, was too painful for them to use. Forgetting about Simple-Talk for a moment, if you ask somebody what blogging platform they’d choose, the odds are they’d say WordPress. Regardless of its technical merits, it’s probably the most popular blogging platform, and it certainly seemed easier to use than Community Server. The issue was that WordPress is normally hosted on a Linux stack running PHP, Apache and MySQL — quite a difference from our Microsoft technology stack. We certainly didn’t want to rewrite the entire site — we just wanted a better blogging platform, with the rest of the existing, legacy site left as is. At a very high level, Simple-Talk’s technical design was originally very straightforward: when your browser sends an HTTP request to Simple-Talk, IIS (the web server) takes the request, does some work, and sends back a response. In order to keep the legacy site running, except with WordPress running the blogs, a different design is called for. We now use nginx as a reverse-proxy, which can then delegate requests to the appropriate application: So, when your browser sends a request to Simple-Talk, nginx takes that request and checks which part of the site you’re trying to access. Most of the time, it just passes the request along to IIS, which can then respond in much the same way it always has. However, if your request is for the blogs, then nginx delegates the request to WordPress. Unfortunately, as simple as that diagram looks, it hides an awful lot of complexity. In particular, the legacy site running on IIS was made up of four .NET applications. I’ve already mentioned one of these applications, Community Server, which handled the old blogs as well as managing membership and the forums. We have a couple of other applications to manage both our newsletters and our articles, and our own custom application to do some of the rendering on the site, such as the front page and the articles. When I say that it was made up of four .NET applications, this might conjure up an image in your mind of how they fit together: You might imagine four .NET applications, each with their own database, communicating over well-defined APIs. Sadly, reality was a little disappointing: We had four .NET applications that all ran on the same database. Worse still, there were many queries that happily joined across tables from multiple applications, meaning that each application was heavily dependent on the exact data schema that each other application used. Add to this that many of the queries were at least dozens of lines long, and practically identical to other queries except in a few key spots, and we can see that attempting to replace one component of the system would be more than a little tricky. However, the problems with the old system do give us a good place to start thinking about desirable qualities from any changes to the platform. Specifically: Maintainability — the tight coupling between each .NET application made it difficult to update any one application without also having to make changes elsewhere Replaceability — the tight coupling also meant that replacing one component wouldn’t be straightforward, especially if it wasn’t on a similar Microsoft stack. We’d like to be able to replace different parts without having to modify the existing codebase extensively Reusability — we’d like to be able to combine the different pieces of the system in different ways for different sites Repeatable deployments — rather than having to deploy the site manually with a long list of instructions, we should be able to deploy the entire site with a single command, allowing you to create a new instance of the site easily whether on production, staging servers, test servers or your own local machine Testability — if we can deploy the site with a single command, and each part of the site is no longer dependent on the specifics of how every other part of the site works, we can begin to run automated tests against the site, and against individual parts, both to prevent regressions and to do a little test-driven development In the next part, I’ll describe the high-level architecture we now have that hopefully brings us a little closer to these five traits.

  Read the article

• Weekend With #iPad

  - by andrewbrust

  Saturday morning, I got up, got dressed and took a 7-minute walk up to the Apple Store in New York’s Meatpacking District to pick up my reserved iPad.  This precinct, which borders Greenwich Village (where I live and grew up) was, when I was a kid, a very industrial and smelly neighborhood during the day  and a rough neighborhood at night.  So imagine my sense of irony as I walked up Hudson Street towards 14th Street, to go wait in line with a bunch of hipsters to buy an iPad on launch day. Numerous blue T-shirt-clad Apple store workers were on hand to check people in to the line specifically identified for people who had reserved an iPad.  Others workers passed out water and all of them, I kid you not, applauded people as they got their chance to go into the store and buy their devices.  They also cheered people and yelled “congratulations” as they left.  The event had all the charm of a mass wedding officiated by Reverend Sung Myung Moon.  Once inside, a nice dude named Trey, with lots of tattoos on his calves, helped me and I acquired my device in short order.  Another guy helped me activate the device, which was comical, because that has to be done through iTunes, which I hadn’t logged into in a while. Turns out my user id was my email address from the company I sold 5 1/2 years ago.  Who knew?  Regardless, I go the device working, packed up and left the store, shuddering as I was cheered and congratulated.  By this time (about 10:30am) the line for reserved units and even walk-ins, was gone.  The iPhone launch this was not. As much as I detested the Apple Store experience, I must say the device is really nice.  the screen is bright, the colors are bold, and the experience is ultra-smooth.  I quickly tested Safari, YouTube, Google Maps, and then installed a few apps, including the New York Times Editors’ Choice and a couple of Twitter clients. Some initial raves: Google Maps and Street View on the iPad is just amazing.  The screen is full-size like a PC or Mac, but it’s right in front of you and responding to taps and flicks and pinches and it’s really engulfing.  Video and photos are really nice on this device, despite the fact that 16:9 and anamorphic aspect ration content is letter boxed.  It still looks amazing.  And apps that are designed especially for the iPad, including The Weather Channel and Gilt and Kayak just look stunning.  The richness, the friendly layout, the finger-friendly UIs, and the satisfaction of not having a keyboard between you and the information you’re managing, while you sit on a couch or an easy chair, is just really a beautiful thing.  The mere experience of seeing these apps’ splash screens causes a shiver and Goosebumps.  Truly.  The iPad is not a desktop machine, and it’s not pocket device.  That doesn’t mean it’s useless though.  It’s the perfect “couchtop” computer. Now some downsides: the WiFi radio seems a bit flakey.  More than a few times, I have had to toggle the WiFi off and back on to get it to connect properly.  Worse yet, the iPad is totally bamboozled by the fact that I have four WiFi access points in my house, each with the same SSID.  My laptops are smart enough to roam from one to the other, but the iPad seems to maintain an affinity for the downstairs access point, even if I’m turning it on two flights up.  Telling the iPad to “forget” my WiFi network and then re-associate with it doesn’t help. More downers: as you might expect, there are far more applications developed for the iPhone than the iPad.  And although iPhone apps run on the iPad, that provides about the same experience as watching standard def on a big HD flat panel, complete with the lousy choice of thick black borders or zooming the picture in to fill the screen.  And speaking of iPhone Apps, I can’t get the Sonos one to work.  Ideally, they’d have a dedicated iPad app and it would work on the first try.  And the iPad is just as bad as any netbook when it comes to being a magnet for fingerprints.  The lack of multi-tasking is quite painful too – truly, I don’t mind if only one app can be active at once, but the lack of ability to switch between apps, and the requirement to return to the home screen and re-launch a previous app to switch back, is already old and I’ve had the thing less than 48 hours. These are just initial impressions.  I’ll have a fuller analysis soon, after I’ve had some more break-in time with my new toy.  I’ll be thinking not just about the iPad and iPhone but also about Android, the 2.1 update for which was pushed to my Droid today, and Windows Phone 7, whose “hub” concept I now understand the value of.  This has been a great year for alternative computing devices, and I see no net downside for Apple, Google or Microsoft.  Exciting times.

  Read the article

• Oracle Fusion Applications User Experience Design Patterns: Feeling the Love after Launch

  - by mvaughan

  By Misha Vaughan, Oracle Applications User ExperienceIn the first video by the Oracle Applications User Experience team on the Oracle Partner Network, Vice President Jeremy Ashley said that Oracle is looking to expand the ecosystem of support for Oracle’s applications customers as they begin to assess their investment and adoption of Oracle Fusion Applications. Oracle has made a massive investment to maintain the benefits of the Fusion Applications User Experience. This summer, the Applications User Experience team released the Oracle Fusion Applications user experience design patterns.Design patterns help create consistent experiences across devices.The launch has been very well received:Angelo Santagata, Senior Principal Technologist and Fusion Middleware evangelist for Oracle,  wrote this to the system integrator community: “The web site is the result of many years of Oracle R&D into user interface design for Fusion Applications and features a really cool web app which allows you to visualise the UI components in action.”  Grant Ronald, Director of Product Management, Application Development Framework (ADF) said: “It’s a science I don't understand, but now I don't have to ... Now you can learn from the UX experience of Fusion Applications.”Frank Nimphius, Senior Principal Product Manager, Oracle (ADF) wrote about the launch of the design patterns for the ADF Code Corner, and Jürgen Kress, Senior Manager EMEA Alliances & Channels for Fusion MiddleWare and Service Oriented Architecture, (SOA), shared the news with his Partner Community. Oracle Twitter followers also helped spread the message about the design patterns launch: ?@bex – Brian Huff, founder and Chief Software Architect for Bezzotech, and Oracle ACE Director:“Nifty! The Oracle Fusion UX team just released new ADF design patterns.”@maiko_rocha, Maiko Rocha, Oracle Consulting Solutions Architect and Oracle FMW engineer: “Haven't seen any other vendor offer such comprehensive UX Design Patterns catalog for free!”@zirous_chad, Chad Thompson, Senior Solutions Architect for Zirous, Inc. and ADF Developer:Wow - @ultan and company did a great job with the Fusion UX PatternsWhat is a user experience design pattern?A user experience design pattern is a re-usable, usability tested functional blueprint for a particular user experience.  Some examples are guided processes, shopping carts, and search and search results.  Ultan O’Broin discusses the top design patterns every developer should know.The patterns that were just released are based on thousands of hours of end-user field studies, state-of-the-art user interface assessments, and usability testing.  To be clear, these are functional design patterns, not technical design patterns that developers may be used to working with.  Because we know there is a gap, we are putting together some training that will help close that gap.Who should care?This is an offering targeted primarily at Application Development Framework (ADF) developers. If you are faced with the following questions regarding Fusion Applications, you will want to know and learn more:•    How do I build something that looks like Fusion Applications?•    How do I build a next-generation application?•    How do I extend a Fusion Application and maintain the user experience?•    I don’t want to re-invent the wheel on the user interface, so where do I start?•    I need to build something that will eventually co-exist with Fusion Applications. How do I do that?These questions are relevant to partners with an ADF competency, individual practitioners, or small consultancies with an ADF specialization, and customers who are trying to shift their IT staff over to supporting Fusion Applications.Where you can find out more?OnlineOur Fusion User Experience design patterns maven is Ultan O’Broin. The Oracle Partner Network is helping our team bring this first e-seminar to you in order to go into a more detail on what this means and how to take advantage of it:? Webinar: Build a Better User Experience with Oracle: Oracle Fusion Applications Functional Design PatternsSept 20, 2012 , 10:30am-11:30am PacificDial-In:  1. 877-664-9137 / Passcode 102546?International:  706-634-9619  http://www.intercall.com/national/oracleuniversity/gdnam.htmlAccess the Live Event Or Via Webconference Access http://ouweb.webex.com  ?and enter this session number: 598036234At a Usergroup eventThe Fusion User Experience Advocates (FXA) are also going to be getting some deep-dive training on this content and can share it with local user groups.At OpenWorld Ultan O’Broin               Chris MuirIf you will be at OpenWorld this year, our own Ultan O’Broin will be visiting the ADF demopod to say hello, thanks to Shay Shmeltzer, Senior Group Manager for ADF outbound communication and at the OTN lounge: Monday 10-10:45, Tuesday 2:15-2:45, Wednesday 2:15-3:30 ?  Oracle JDeveloper and Oracle ADF,  Moscone South, Right - S-207? “ADF Meet and Greett”, OTN Lounge, Wednesday 4:30 And I cannot talk about OpenWorld and ADF without mentioning Chris Muir’s ADF EMG event: the Year After the Year Of the ADF Developer – Sunday, Sept 30 of OpenWorld. Chris has played host to Ultan and the Applications user experience message for his online community and is now a seasoned UX expert.Expect to see additional announcements about expanded and training on similar topics in the future.

  Read the article

• SQL SERVER – SSMS: Top Object and Batch Execution Statistics Reports

  - by Pinal Dave

  The month of June till mid of July has been the fever of sports. First, it was Wimbledon Tennis and then the Soccer fever was all over. There is a huge number of fan followers and it is great to see the level at which people sometimes worship these sports. Being an Indian, I cannot forget to mention the India tour of England later part of July. Following these sports and as the events unfold to the finals, there are a number of ways the statisticians can slice and dice the numbers. Cue from soccer I can surely say there is a team performance against another team and then there is individual member fairs against a particular opponent. Such statistics give us a fair idea to how a team in the past or in the recent past has fared against each other, head-to-head stats during World cup and during other neutral venue games. All these statistics are just pointers. In reality, they don’t reflect the calibre of the current team because the individuals who performed in each of these games are totally different (Typical example being the Brazil Vs Germany semi-final match in FIFA 2014). So at times these numbers are misleading. It is worth investigating and get the next level information. Similar to these statistics, SQL Server Management studio is also equipped with a number of reports like a) Object Execution Statistics report and b) Batch Execution Statistics reports. As discussed in the example, the team scorecard is like the Batch Execution statistics and individual stats is like Object Level statistics. The analogy can be taken only this far, trust me there is no correlation between SQL Server functioning and playing sports – It is like I think about diet all the time except while I am eating. Performance – Batch Execution Statistics Let us view the first report which can be invoked from Server Node -> Reports -> Standard Reports -> Performance – Batch Execution Statistics. Most of the values that are displayed in this report come from the DMVs sys.dm_exec_query_stats and sys.dm_exec_sql_text(sql_handle). This report contains 3 distinctive sections as outline below.   Section 1: This is a graphical bar graph representation of Average CPU Time, Average Logical reads and Average Logical Writes for individual batches. The Batch numbers are indicative and the details of individual batch is available in section 3 (detailed below). Section 2: This represents a Pie chart of all the batches by Total CPU Time (%) and Total Logical IO (%) by batches. This graphical representation tells us which batch consumed the highest CPU and IO since the server started, provided plan is available in the cache. Section 3: This is the section where we can find the SQL statements associated with each of the batch Numbers. This also gives us the details of Average CPU / Average Logical Reads and Average Logical Writes in the system for the given batch with object details. Expanding the rows, I will also get the # Executions and # Plans Generated for each of the queries. Performance – Object Execution Statistics The second report worth a look is Object Execution statistics. This is a similar report as the previous but turned on its head by SQL Server Objects. The report has 3 areas to look as above. Section 1 gives the Average CPU, Average IO bar charts for specific objects. The section 2 is a graphical representation of Total CPU by objects and Total Logical IO by objects. The final section details the various objects in detail with the Avg. CPU, IO and other details which are self-explanatory. At a high-level both the reports are based on queries on two DMVs (sys.dm_exec_query_stats and sys.dm_exec_sql_text) and it builds values based on calculations using columns in them: SELECT * FROM    sys.dm_exec_query_stats s1 CROSS APPLY sys.dm_exec_sql_text(sql_handle) AS s2 WHERE   s2.objectid IS NOT NULL AND DB_NAME(s2.dbid) IS NOT NULL ORDER BY  s1.sql_handle; This is one of the simplest form of reports and in future blogs we will look at more complex reports. I truly hope that these reports can give DBAs and developers a hint about what is the possible performance tuning area. As a closing point I must emphasize that all above reports pick up data from the plan cache. If a particular query has consumed a lot of resources earlier, but plan is not available in the cache, none of the above reports would show that bad query. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL Tagged: SQL Reports

  Read the article

• Passing the CAML thru the EY of the NEEDL

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved Passing the CAML thru the EY of the NEEDL Definitions: CAML (Collaborative Application Markup Language) is an XML based markup language used in Microsoft SharePoint technologies  Anonymous: A camel is a horse designed by committee  Dov Trietsch: A CAML is a HORS designed by Microsoft  I was advised against putting any Camel and Sphinx rhymes in here. Look it up in Google!  _____ Now that we have dispensed with the dromedary jokes (BTW, I have many more, but they are not fit to print!), here is an interesting problem and its solution.  We have built a list where the title must be kept unique so I needed to verify the existence (or absence) of a list item with a particular title. Two methods came to mind:  1: Span the list until the title is found (result = found) or until the list ends (result = not found). This is an algorithm of complexity O(N) and for long lists it is a performance sucker. 2: Use a CAML query instead. Here, for short list we’ll encounter some overhead, but because the query results in an SQL query on the content database, it is of complexity O(LogN), which is significantly better and scales perfectly. Obviously I decided to go with the latter and this is where the CAML s--t hit the fan.   A CAML query returns a SPListItemCollection and I simply checked its Count. If it was 0, the item did not already exist and it was safe to add a new item with the given title. Otherwise I cancelled the operation and warned the user. The trouble was that I always got a positive. Most of the time a false positive. The count was greater than 0 regardles of the title I checked (except when the list was empty, which happens only once). This was very disturbing indeed. To solve my immediate problem which was speedy delivery, I reverted to the “Span the list” approach, but the problem bugged me, so I wrote a little console app by which I tested and tweaked and tested, time and again, until I found the solution. Yes, one can pass the proverbial CAML thru the ey of the needle (e’s missing on purpose).  So here are my conclusions:  CAML that does not work:  Note: QT is my quote:  char QT = Convert.ToChar((int)34); string titleQuery = "<Query>><Where><Eq>"; titleQuery += "<FieldRef Name=" + QT + "Title" + QT + "/>"; titleQuery += "<Value Type=" + QT + "Text" + QT + ">" + uniqueID + "</Value></Eq></Where></Query>"; titleQuery += "<ViewFields><FieldRef Name=" + QT + "Title" + QT + "/></ViewFields>";  Why? Even though U2U generates it, the <Query> and </Query> tags do not belong in the query that you pass. Start your query with the <Where> clause.  Also the <ViewFiels> clause does not belong. I used this clause to limit the returned collection to a single column, and I still wish to do it. I’ll show how this is done a bit later.   When you use the <Query> </Query> tags in you query, it’s as if you did not specify the query at all. What you get is the all inclusive default query for the list. It returns evey column and every item. It is expensive for both server and network because it does all the extra processing and eats plenty of bandwidth.   Now, here is the CAML that works  string titleQuery = "<Where><Eq>"; titleQuery += "<FieldRef Name=" + QT + "Title" + QT + "/>"; titleQuery += "<Value Type=" + QT + "Text" + QT + ">" + uniqueID + "</Value></Eq></Where>";  You’ll also notice that inside the unusable <ViewFields> clause above, we have a <FieldRef> clause. This is what we pass to the SPQuery object. Here is how:  SPQuery query = new SPQuery(); query.Query = titleQuery; query.ViewFields = "<FieldRef Name=" + QT + "Title" + QT + "/>"; query.RowLimit = 1; SPListItemCollection col = masterList.GetItems(query);  Two thing to note: we enter the view fields into the SPQuery object and we also limited the number of rows that the query returns. The latter is not always done, but in an existence test, there is no point in returning hundreds of rows. The query will now return one item or none, which is all we need in order to verify the existence (or non-existence) of items. Limiting the number of columns and the number of rows is a great performance enhancer. That’s all folks!!

  Read the article

• Personal search – the future of search

  - by jamiet

  [Four months ago I wrote a meandering blog post on another blogging site entitled Personal search – the future of search. The points I made therein are becoming more relevant to what I'm reading about and hoping to get involved in in the future so I'm re-posting here to a wider audience to hopefully get some more feedback and guage reaction to it. This has been prompted by the book Pull by David Siegel that is forming my current holiday reading (recommended to me by a commenter on my previous post Interesting things – Twitter annotations and your phone as a web server) and in particular by Siegel's notion of us all in the future having a personal online data vault.] My one-time colleague Paul Dawson recently wrote an article called The Future of Search and in it he proposed some interesting ideas. Some choice quotes: The growth of Chinese search giant Baidu is an indicator that fully localised and tailored content and offerings have great traction with local audiences This trend is already driving an increase in the use of specialist searches … Look at how Farecast is now integrated into Bing for example, or how Flightstats is now integrated into Google. Search does not necessarily have to begin with a keyword, but could start instead with a click or a touch. Take a look at Retrievr. Start drawing a picture in the box and see what happens. This is certainly search without the need for typing in keywords search technology has advanced greatly in recent years. The recent launch of Microsoft Live Labs’ Pivot has given us a taste of what we can expect to see in the future This really got me thinking about where search might go in the future and as my mind wandered I realised that as the amount of data that we collect about ourselves increases so too will the need and the desire to search it. The amount of electronic data that exists about each and every person is increasing and in the near future I fully expect that we are going to be able to store personal data such as: A history of our location (in fact Google Latitude already offers this facility) Recordings of all our phone conversations Health information history (weight, blood pressure etc…) Energy usage Spending history What films we watch, what radio stations we listen to Voting history Of course, most of this stuff is already stored somewhere but crucially we don’t have easy access to it. My utilities supplier knows how much electricity I’m using but if I want to know for myself I have to go and dig through my statements (assuming I have kept them). Similarly my doctor probably has ready access to all of my health records, my bank knows exactly what I have spent my money on, my cable supplier knows what I watch on TV and my mobile phone supplier probably knows exactly where I am and where I’ve been for the past few years. Strange then that none of this electronic information is available to me in a way that I can really make use of it; after all, its MY information. Its MY data. I created it. That is set to change. As technologies mature and customers become more technically cognizant they will demand more access to the data that companies hold about them. The companies themselves will realise the benefit that they derive from giving users what they want and will embrace ways of providing it. As a result the amount of data that we store about ourselves is going to increase exponentially and the desire to search and derive value from that data is going to grow with it; we are about to enter the era of the “personal datastore” and we will want, and need, to search through it in order to make sense of it all. Its interesting then that today when we think of search we think of search engines and yet in these personal datastores we’re referring to data that search engines can’t touch because WE own it and we (hopefully) choose to keep it private. Someone, I know not who, is going to lead in this space by making it easy for us to search our data and retrieve information that we have either forgotten or maybe didn’t even know in the first place. We will learn new things about ourselves and about our habits; we will share these findings with whomever we choose; we will compare what we discover with others; we will collaborate for mutual benefit and, most of all, we will educate ourselves as to how to live our lives better. Search will be the means to that end, it will enable us to make sense of the wealth of information that we will collect day in day out. The future of search is personal, why would we be interested in anything else? @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• A new SQL, a new Analysis Services, a new Workshop! #ssas #sql2012

  - by Marco Russo (SQLBI)

  One week ago Microsoft SQL Server 2012 finally debuted with a virtual launch event and you can find many intro sessions there (20 minutes each). There is a lot of new content available if you want to learn more about SQL 2012 and in this blog post I’d like to provide a few link to sessions, documents, bits and courses that are available now or very soon. First of all, the release of Analysis Services 2012 has finally released PowerPivot 2012 (many of us called it PowerPivot v2 before this official name) and also the new Data Mining Add-in for Microsoft Office 2010, now available also for Excel 64bit! And, of course, don’t miss the Microsoft SQL Server 2012 Feature Pack, there are a lot of upgrades for both DBAs and developers. I just discovered there is a new LocalDB version of SQL Express that can run in user mode without any setup. Is this the end of SQL CE? But now, back to Analysis Services: if you want some tutorial on Tabular, the Microsoft Virtual Academy has a whole track dedicated to Analysis Services 2012 but you will probably be interested also in the one about Reporting Services 2012. If you think that virtual is good but it’s not enough, there are plenty of conferences in the coming months – these are just those where I and Alberto will deliver some SSAS Tabular presentations: SQLBits X, London, March 29-31, 2012: if you are in London or want a good reason to go, this is the most important SQL Server event in Europe this year, no doubts about it. And not only because of the high number of attendees, but also because there is an impressive number of speakers (excluding me, of course) coming from all over the world. This is an event second only to PASS Summit in Seattle so there are no good reasons to not attend it. Microsoft SQL Server & Business Intelligence Conference 2012, Milan, March 28-29, 2012: this is an Italian conference so the language might be a barrier, but many of us also speak English and the food is good! Just a few seats still available. TechEd North America, Orlando, June 11-14, 2012: you know, this is a big event and it contains everything – if you want to spend a whole day learning the SSAS Tabular model with me and Alberto, don’t miss our pre-conference day “Using BISM Tabular in Microsoft SQL Server Analysis Services 2012” (be careful, it is on June 10, a nice study-Sunday!). TechEd Europe, Amsterdam, June 26-29, 2012: the European version of TechEd provides almost the same content and you don’t have to go overseas. We also run the same pre-conference day “Using BISM Tabular in Microsoft SQL Server Analysis Services 2012” (in this case, it is on June 25, that’s a regular Monday). I and Alberto will also speak at some user group meeting around Europe during… well, we’re going to travel a lot in the next months. In fact, if you want to get a complete training on SSAS Tabular, you should spend two days with us in one of our SSAS Tabular Workshop! We prepared a 2-day seminar, a very intense one, that start from the simple tabular modeling and cover architecture, DAX, query, advanced modeling, security, deployment, optimization, monitoring, relationships with PowerPivot and Multidimensional… Really, there are a lot of stuffs here! We announced the first dates in Europe and also an online edition optimized for America’s time zone: Apr 16-17, 2012 – Amsterdam, Netherlands Apr 26-27, 2012 – Copenhagen, Denmark May 7-8, 2012 – Online for America’s time zone May 14-15, 2012 – Brussels, Belgium May 21-22, 2012 – Oslo, Norway May 24-25, 2012 – Stockholm, Sweden May 28-29, 2012 – London, United Kingdom May 31-Jun 1, 2012 – Milan, Italy (Italian language) Also Chris Webb will join us in this workshop and in every date you can find who is the speaker on the web site. The course is based on our upcoming book, almost 600 pages (!) about SSAS Tabular, an incredible effort that will be available very soon in a preview (rough cuts from O’Reilly) and will be on the shelf in May. I will provide a link to order it as soon as we have one! And if you think that this is not enough… you’re right! Do you know what is the only thing you can do to optimize your Tabular model? Optimize your DAX code. Learning DAX is easy, mastering DAX requires some knowledge… and our DAX Advanced Workshop will provide exactly the required content. Public classes will be available later this year, by now we just deliver it on demand.

  Read the article

• BPM Suite 11gR1 Released

  - by Manoj Das

  This morning (April 27th, 2010), Oracle BPM Suite 11gR1 became available for download from OTN and eDelivery. If you have been following our plans in this area, you know that this is the release unifying BEA ALBPM product, which became Oracle BPM10gR3, with the Oracle stack. Some of the highlights of this release are: BPMN 2.0 modeling and simulation Web based Process Composer for BPMN and Rules authoring Zero-code environment with full access to Oracle SOA Suite’s rich set of application and other adapters Process Spaces – Out-of-box integration with Web Center Suite Process Analytics – Native process cubes as well as integration with Oracle BAM You can learn more about this release from the documentation. Notes about downloading and installing Please note that Oracle BPM Suite 11gR1 is delivered and installed as part of SOA 11.1.1.3.0, which is a sparse release (only incremental patch). To install: Download and install SOA 11.1.1.2.0, which is a full release (you can find the bits at the above location) Download and install SOA 11.1.1.3.0 During configure step (using the Fusion Middleware configuration wizard), use the Oracle Business Process Management template supplied with the SOA Suite11g (11.1.1.3.0) If you plan to use Process Spaces, also install Web Center 11.1.1.3.0, which also is delivered as a sparse release and needs to be installed on top of Web Center 11.1.1.2.0 Some early feedback We have been receiving very encouraging feedback on this release. Some quotes from partners are included below: “I just attended a preview workshop on BPM Studio, Oracle's BPMN 2.0 tool, held by Clemens Utschig Utschig from Oracle HQ. The usability and ease to get started are impressive. In the business view analysts can intuitively start modeling, then developers refine in their own, more technical view. The BPM Studio sets itself apart from pure play BPMN 2.0 tools by being seamlessly integrated inside a holistic SOA / BPM toolset: BPMN models are placed in SCA-Composites in SOA Suite 11g. This allows to abstract away the complexities of SOA integration aspects from business process aspects. For UIs in BPMN tasks, you have the richness of ADF 11g based Frontends. With BPM Studio we architects have a new modeling and development IDE that gives us interesting design challenges to grasp and elaborate, since many things BPMN 2.0 are different from good ol' BPEL. For example, for simple transformations, you don't use BPEL "assign" any more, but add the transformation directly to the service call. There is much less XPath involved. And, there is no translation from model to BPEL code anymore, so the awkward process model to BPEL roundtrip, which never really worked as well as it looked on marketing slides, is obsolete: With BPMN 2.0 "the model is the code". Now, these are great times to start the journey into BPM! Some tips: Start Projects smoothly, with initial processes being not overly complex and not using the more esoteric areas of BPMN, to manage the learning path and to stay successful with each iteration. Verify non functional requirements by conducting performance and load tests early. As mentioned above, separate all technical integration logic into SOA Suite or Oracle Service Bus. And - share your experience!” Hajo Normann, SOA Architect - Oracle ACE Director - Co-Leader DOAG SIG SOA   "Reuse of components across the Oracle 11G Fusion Middleware stack, like for instance a Database Adapter, is essential. It improves stability and predictability of the solution. BPM just is one of the components plugging into the stack and reuses all other components." Mr. Leon Smiers, Oracle Solution Architect, Capgemini   “I had the opportunity to follow a hands-on workshop held by Clemens for Oracle partners and I was really impressed of the overall offering of BPM11g. BPM11g allows the execution of BPMN 2.0 processes, without having to transform/translate them first to BPEL in order to be executable. The fact that BPMN uses the same underlying service infrastructure of SOA Suite 11g has a lot of benefits for us already familiar with SOA Suite 11g. BPMN is just another SCA component within a SCA composite and can (re)use all the existing components like Rules, Human Workflow, Adapters and Mediator. I also like the fact that BPMN runs on the same service engine as BPEL. By that all known best practices for making a BPEL  process reliable are valid for BPMN processes as well. Last but not least, BPMN is integrated into the superior end-to-end tracing of SOA Suite 11g. With BPM11g, Oracle offers a very competitive product which will have a big effect on the IT market. Clemens and Jürgen: Thanks for the great workshop! I’m really looking forward to my first project using Oracle BPM11g!” Guido Schmutz, Technology Manager / Oracle ACE Director for Fusion Middleware and SOA, Company:  Trivadis Some earlier feedback were summarized in this post.

  Read the article

• MySQL Connector/Net 6.5.5 Maintenance Release has been released

  - by fernando

  MySQL Connector/Net 6.5.5, a new maintenance release of our 6.5 series, has been released.  This release is GA quality and is appropriate for use in production environments.  Please note that 6.6 is our latest driver series and is the recommended product for development. It is now available in source and binary form from http://dev.mysql.com/downloads/connector/net/#downloads and mirror sites (note that not all mirror sites may be up to date at this point-if you can't find this version on some mirror, please try again later or choose another download site.) The 6.5.5 version of MySQL Connector/Net brings the following fixes: - Fix for ArgumentNull exception when using Take().Count() in a LINQ to Entities query (bug MySql #64749, Oracle bug #13913047). - Fix for type varchar changed to bit when saving in Table Designer (Oracle bug #13916560). - Fix for error when trying to change the name of an Index on the Indexes/Keys editor; along with this fix now users can change the Index type of a new Index which could not be done   in previous versions, and when changing the Index name the change is reflected on the list view at the left side of the Index/Keys editor (Oracle bug #13613801). - Fix for stored procedure call using only its name with EF code first (MySql bug #64999, Oracle bug #14008699). - Fix for List.Contains generates a bunch of ORs instead of more efficient IN clause in   LINQ to Entities (Oracle bug #14016344, MySql bug #64934). - Fix for performance issue in generated EF query: .NET StartsWith/Contains/EndsWith produces MySql's locate instead of Like (MySql bug #64935, Oracle bug #14009363). - Fix for script generated for code first contains wrong alter table and wrong declaration for byte[] (MySql bug #64216, Oracle bug #13900091). - Fix and code contribution for bug Timed out sessions are removed without notification which allow to enable the Expired CallBack when Session Provider times out any session (bug MySql #62266 Oracle bug # 13354935) - Fix for Exception thrown when using cascade delete in an EDM Model-First in Entity Framework (Oracle bug #14008752, MySql bug #64779). - Fix for Session locking issue with MySqlSessionStateStore (MySql bug #63997, Oracble bug #13733054). - Fixed deleting a user profile using Profile provider (MySQL bug #64470, Oracle bug #13790123) - Fix for bug Cannot Create an Entity with a Key of Type String (MySQL bug #65289, Oracle bug #14540202). This fix checks if the type has a FixedLength facet set in order to create a char otherwise should create varchar, mediumtext or longtext types when using a String CLR type in Code First or Model First also tested in Database First. Unit tests added for Code First and ProviderManifest. - Fix for bug "CacheServerProperties can cause 'Packet too large' error". The issue was due to a missing reading of Max_allowed_packet server property when CacheServerProperties is in true, since the value was read only in the first connection but the following pooled connections had a wrong value causing a Packet too large error. Including also a unit test for this scenario. All unit test passed. MySQL Bug #66578 Orabug #14593547. - Fix for handling unnamed parameter in MySQLCommand. This fix allows the mysqlcommand to handle parameters without requiring naming (e.g. INSERT INTO Test (id,name) VALUES (?, ?) ) (MySQL Bug #66060, Oracle bug #14499549). - Fixed inheritance on Entity Framework Code First scenarios. Discriminator column is created using its correct type as varchar(128) (MySql bug #63920 and Oracle bug #13582335). - Fixed "Trying to customize column precision in Code First does not work" (MySql bug #65001, Oracle bug #14469048). - Fixed bug ASP.NET Membership database fails on MySql database UTF32 (MySQL bug #65144, Oracle bug #14495292). - Fix for MySqlCommand.LastInsertedId holding only 32 bit values (MySql bug #65452, Oracle bug #14171960) by changing   several internal declaration of lastinsertid from int to long. - Fixed "Decimal type should have digits at right of decimal point", now default is 2, but user's changes in   EDM designer are recognized (MySql bug #65127, Oracle bug #14474342). - Fix for NullReferenceException when saving an uninitialized row in Entity Framework (MySql bug #66066, Oracle bug #14479715). - Fix for error when calling RoleProvider.RemoveUserFromRole(): causes an exception due to a wrong table being used (MySql bug #65805, Oracle bug #14405338). - Fix for "Memory Leak on MySql.Data.MySqlClient.MySqlCommand", too many MemoryStream's instances created (MySql bug #65696, Oracle bug #14468204). - Added ANTLR attribution notice (Oracle bug #14379162). - Fixed Entity Framework + mysql connector/net in partial trust throws exceptions (MySql bug #65036, Oracle bug #14668820). - Added support in Parser for Datetime and Time types with precision when using Server 5.6 (No bug Number). - Small improvement on MySqlPoolManager CleanIdleConnections for better mysqlpoolmanager idlecleanuptimer at startup (MySql bug #66472 and Oracle bug #14652624). - Fix for bug TIMESTAMP values are mistakenly represented as DateTime with Kind = Local (Mysql bug #66964, Oracle bug #14740705). - Fix for bug Keyword not supported. Parameter name: AttachDbFilename (Mysql bug #66880, Oracle bug #14733472). - Added support to MySql script file to retrieve data when using "SHOW" statements. - Fix for Package Load Failure in Visual Studio 2005 (MySql bug #63073, Oracle bug #13491674). - Fix for bug "Unable to connect using IPv6 connections" (MySQL bug #67253, Oracle bug #14835718). - Added auto-generated values for Guid identity columns (MySql bug #67450, Oracle bug #15834176). - Fix for method FirstOrDefault not supported in some LINQ to Entities queries (MySql bug #67377, Oracle bug #15856964). The release is available to download at http://dev.mysql.com/downloads/connector/net/6.5.html Documentation ------------------------------------- You can view current Connector/Net documentation at http://dev.mysql.com/doc/refman/5.5/en/connector-net.html You can find our team blog at http://blogs.oracle.com/MySQLOnWindows. You can also post questions on our forums at http://forums.mysql.com/. Enjoy and thanks for the support! 

  Read the article

• SQL SERVER – Planned and Unplanned Availablity Group Failovers – Notes from the Field #031

  - by Pinal Dave

  [Note from Pinal]: This is a new episode of Notes from the Fields series. AlwaysOn is a very complex subject and not everyone knows many things about this. The matter of the fact is there is very little information available on this subject online and not everyone knows everything about this. This is why when a very common question related to AlwaysOn comes, people get confused. In this episode of the Notes from the Field series database expert John Sterrett (Group Principal at Linchpin People) explains a very common issue DBAs and Developer faces in their career and is related to Planned and Unplanned Availablity Group Failovers. Linchpin People are database coaches and wellness experts for a data driven world. Read the experience of John in his own words. Whenever a disaster occurs it will be a stressful scenario regardless of how small or big the disaster is. This gets multiplied when it is your first time working with newer technology or the first time you are going through a disaster without a proper run book. Today, were going to help you establish a run book for creating a planned failover with availability groups. To make today’s session simple were going to have two instances of SQL Server 2012 included in an availability group and walk through the steps of doing an unplanned failover.  We will focus on using the user interface and T-SQL to complete the failovers. We are going to use a two replica Availability Group where each replica is in another location. Therefore, we will be covering Asynchronous (non automatic failover) the following is a breakdown of our availability group utilized today. Seeing the following screen might be scary the first time you come across an unplanned failover.  It looks like our test database used in this Availability Group is not functional and it currently isn’t. The database status is not synchronizing which makes sense because the primary replica went down so it couldn’t synchronize. With that said, we can still failover and make it functional while we troubleshoot why we lost our primary replica. To start we are going to right click on the availability group that needs to be restarted and select failover. This will bring up the following wizard, which will walk you through several steps needed to complete the failover using the graphical user interface provided with SQL Server Management Studio (SSMS). You are going to see warning messages simply because we are in Asynchronous commit mode and can not guarantee ‘no data loss’ when we do failover. Just incase you missed it; you get another screen warning you about potential data loss because we are in Asynchronous mode. Next we get to connect to the specific replica we want to become the primary replica after the failover occurs. In our case, we only have two replicas so this is trivial. In order to failover, it’s required to connect to the replica that will become primary.  The following screen shows that the connection has been made successfully. Next, you will see the final summary screen. Once again, this reminds you that the failover action will cause data loss as were using Asynchronous commit mode due to the distance between instances used for disaster recovery. Finally, once the failover is completed you will see the following screen. If you followed along this long you might be wondering what T-SQL scripts are generated for clicking through all the sections of the wizard. If you have used Database Mirroring in the past you might be surprised.  It’s not too different, which makes sense because the data is being replicated via SQL Server endpoints just like the good old database mirroring. Now were going to take a look at how to do a failover with just T-SQL. First, were going to need to open a new query window and run our query in SQLCMD mode. Just incase you haven’t used SQLCMD mode before we will show you how to enable it below. Now you can run the following statement. Notice, we connect to the replica we want to become primary after failover and specify to force failover to allow data loss. We can use the following script to failback over when our primary instance comes back online. -- YOU MUST EXECUTE THE FOLLOWING SCRIPT IN SQLCMD MODE. :Connect SQL2012PROD1 ALTER AVAILABILITY GROUP [AGSQL2] FORCE_FAILOVER_ALLOW_DATA_LOSS; GO Are your servers running at optimal speed or are you facing any SQL Server Performance Problems? If you want to get started with the help of experts read more over here: Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• 2012 Oracle Fusion Innovation Awards - Part 2

  - by Michelle Kimihira

  Author: Moazzam Chaudry Continuing from Friday's blog on 2012 Oracle Fusion Innovation Awards, this blog (Part 2) will provide more details around the customers. It was a tremendous honor to be in single room of winners. We only wish we could have had more time to share stories from all the winners.  We received great insight from all the innovative solutions that our customers deploy and would like to share them broadly, so that others can benefit from best practices. There was a customer panel session joined by Ingersoll Rand, Nike and Motability and here is what was discussed: Barry Bonar, Enterprise Architect from Ingersoll Rand shared details around their solution, comprised of Oracle Exalogic, Oracle WebLogic Server and Oracle SOA Suite. This combined solutoin enabled their business transformation to increase decision-making, speed and efficiency, resulting in 40% reduced IT spend, 41X Faster response time and huge cost savings. Ashok Balakrishnan, Architect from Nike shared how they leveraged Oracle Coherence to analyze their digital "footprint" of activities. This helps them compete, collaborate and compare athletic data over time. Lastly, Ashley Doodly, Head of IT from Motability shared details around their solution compromised of Oracle SOA Suite, Service Bus, ADF, Coherence, BO and E-Business Suite. This solution helped Motability achieve 100% ROI within the first few months, performance in seconds vs. 10's of minutes and tremendous improvement in throughput that increased up to 50%.  This year's winners by category are: Oracle Exalogic Customer Results using Fusion Middleware Netshoes ATG on Exalogic: 6X Reduced H/W foot print, 6.2X increased throughput and 3 weeks time to market Claro Part of America Movil, running mission critical Java Application on Exalogic with 35X Faster Java response time, 5X Throughput Underwriters Laboratories Exalogic as an Apps Consolidation platform to power tremendous growth Ingersoll Rand EBS on Exalogic: Up to 40% Reduction in overall IT budget, 3x reduced foot print Oracle Cloud Application Foundation Customer Results using Fusion Middleware  Mazda Motor Corporation Tuxedo ART Batch runtime environment to migrate their batch apps on new open environment and reduce main frame cost. HOTELBEDS Technology Open Source to WebLogic transformation Globalia Corporation Introduced Oracle Coherence to fully reengineer DTH system and provide multiple business and technical benefits Nike Nike+, digital sports platform, has 8M users and is expecting an 5X increase in users, many of who will carry multiple devices that frequently sync data with the Digital Sport platform Comcast Corporation The solution is expected to increase availability, continuity, performance, and simplify and make the code at the application layer more flexible. Oracle SOA and Oracle BPM Customer Results using Fusion Middleware NTT Docomo Network traffic solution based on Oracle event processing and coherence - massive in scale: 12M users (50M in future) - 800,000 events/sec. Schneider National, Inc. SOA/B2B/ADF/Data Integration to orchestrate key order processes across Siebel, OTM & EBS.  Platform runs 60M trans/day and  50 million composite SOA instances per day across 10G and 11G Amadeus Oracle BPM solution: Business Rules and processes vary across local (80), regional (~10) and corporate approval process. Up to 10 levels of approval. Plans to deploy across 20+ markets Navitar SOA solution integrates a fully non-Oracle legacy application/ERP environment using Oracle’s SOA Suite and Oracle AIA Foundation Pack. Motability Uses SOA Suite to synchronize data across the systems and to manage the vehicle remarketing process Oracle WebCenter Customer Results using Fusion Middleware  News Limited Single platform running websites for 50% of Australia's newspapers University of Louisville “Facebook for Medicine”: Oracle Webcenter platform and Oracle BIEE to analyze patient test data and uncover potential health issues. Expecting annualized ROI of 277% China Mobile Jiangsu Company portal (25k users) to drive collaboration & productivity Life Technologies Portal for remotely monitoring & repairing biotech instruments LA Dept. of Water & Power Oracle WebCenter Portal to power ladwp.com on desktop and mobile for 1.6million users Oracle Identity Management Customer Results using Fusion Middleware Education Testing Service Identity Management platform for provisioning & SSO of 6 million GRE, GMAT, TOEFL customers Avea Oracle Identity Manager allowing call center personnel to quickly change Identity Profile to handle varying call loads based on a user self service interface. Decreased Admin Cost by 30% Oracle Data Integration Customer Results using Fusion Middleware Raymond James Near real-time integration for improved systems (throughput & performance) and enhanced operational flexibility in a 24 X 7 environment Wm Morrison Supermarkets Electronic Point of Sale integration handling over 80 million transactions a day in near real time (15 min intervals) Oracle Application Development Framework and Oracle Fusion Development Customer Results using Fusion Middleware Qualcomm Incorporated Solution providing  immediate business value enabling a self-service model necessary for growing the new customer base, an increase in customer satisfaction, reduced “time-to-deliver” Micros Systems, Inc. ADF, SOA Suite, WebCenter  enables services that include managing distribution of hotel rooms availability and rates to channels such as Hotel Web-site, Expedia, etc. Marfin Egnatia Bank A new web 2.0 UI provides a much richer experience through the ADF solution with the end result being one of boosting end-user productivity    Business Analytics (Oracle BI, Oracle EPM, Oracle Exalytics) Customer Results using Fusion Middleware INC Research Self-service customer portal delivering 5–10% of the overall revenue - expected to grow fast with the BI solution Experian Reduction in Time to Complete the Financial Close Process Hologic Inc Solution, saving months of decision-making uncertainty! We look forward to seeing many more innovative nominations. The nominatation process for 2013 begins in April 2013.    Additional Information: Blog: Oracle WebCenter Award Winners Blog: Oracle Identity Management Winners Blog: Oracle Exalogic Winners Blog: SOA, BPM and Data Integration will be will feature award winners in its respective areas this week Subscribe to our regular Fusion Middleware Newsletter Follow us on Twitter and Facebook

  Read the article

• Implementing an Interceptor Using NHibernate’s Built In Dynamic Proxy Generator

  - by Ricardo Peres

  NHibernate 3.2 came with an included proxy generator, which means there is no longer the need – or the possibility, for that matter – to choose Castle DynamicProxy, LinFu or Spring. This is actually a good thing, because it means one less assembly to deploy. Apparently, this generator was based, at least partially, on LinFu. As there are not many tutorials out there demonstrating it’s usage, here’s one, for demonstrating one of the most requested features: implementing INotifyPropertyChanged. This interceptor, of course, will still feature all of NHibernate’s functionalities that you are used to, such as lazy loading, and such. We will start by implementing an NHibernate interceptor, by inheriting from the base class NHibernate.EmptyInterceptor. This class does not do anything by itself, but it allows us to plug in behavior by overriding some of its methods, in this case, Instantiate: 1: public class NotifyPropertyChangedInterceptor : EmptyInterceptor 2: { 3: private ISession session = null; 4:  5: private static readonly ProxyFactory factory = new ProxyFactory(); 6:  7: public override void SetSession(ISession session) 8: { 9: this.session = session; 10: base.SetSession(session); 11: } 12:  13: public override Object Instantiate(String clazz, EntityMode entityMode, Object id) 14: { 15: Type entityType = Type.GetType(clazz); 16: IProxy proxy = factory.CreateProxy(entityType, new _NotifyPropertyChangedInterceptor(), typeof(INotifyPropertyChanged)) as IProxy; 17: 18: _NotifyPropertyChangedInterceptor interceptor = proxy.Interceptor as _NotifyPropertyChangedInterceptor; 19: interceptor.Proxy = this.session.SessionFactory.GetClassMetadata(entityType).Instantiate(id, entityMode); 20:  21: this.session.SessionFactory.GetClassMetadata(entityType).SetIdentifier(proxy, id, entityMode); 22:  23: return (proxy); 24: } 25: } Then we need a class that implements the NHibernate dynamic proxy behavior, let’s place it inside our interceptor, because it will only need to be used there: 1: class _NotifyPropertyChangedInterceptor : NHibernate.Proxy.DynamicProxy.IInterceptor 2: { 3: private PropertyChangedEventHandler changed = delegate { }; 4:  5: public Object Proxy 6: { 7: get; 8: set;} 9:  10: #region IInterceptor Members 11:  12: public Object Intercept(InvocationInfo info) 13: { 14: Boolean isSetter = info.TargetMethod.Name.StartsWith("set_") == true; 15: Object result = null; 16:  17: if (info.TargetMethod.Name == "add_PropertyChanged") 18: { 19: PropertyChangedEventHandler propertyChangedEventHandler = info.Arguments[0] as PropertyChangedEventHandler; 20: this.changed += propertyChangedEventHandler; 21: } 22: else if (info.TargetMethod.Name == "remove_PropertyChanged") 23: { 24: PropertyChangedEventHandler propertyChangedEventHandler = info.Arguments[0] as PropertyChangedEventHandler; 25: this.changed -= propertyChangedEventHandler; 26: } 27: else 28: { 29: result = info.TargetMethod.Invoke(this.Proxy, info.Arguments); 30: } 31:  32: if (isSetter == true) 33: { 34: String propertyName = info.TargetMethod.Name.Substring("set_".Length); 35: this.changed(this.Proxy, new PropertyChangedEventArgs(propertyName)); 36: } 37:  38: return (result); 39: } 40:  41: #endregion 42: } What this does for every interceptable method (those who are either virtual or from the INotifyPropertyChanged) is: For methods that came from the INotifyPropertyChanged interface, add_PropertyChanged and remove_PropertyChanged (yes, events are methods ), we add an implementation that adds or removes the event handlers to the delegate which we declared as changed; For all the others, we direct them to the place where they are actually implemented, which is the Proxy field; If the call is setting a property, it fires afterwards the PropertyChanged event. In order to use this, we need to add the interceptor to the Configuration before building the ISessionFactory: 1: using (ISessionFactory factory = cfg.SetInterceptor(new NotifyPropertyChangedInterceptor()).BuildSessionFactory()) 2: { 3: using (ISession session = factory.OpenSession()) 4: using (ITransaction tx = session.BeginTransaction()) 5: { 6: Customer customer = session.Get<Customer>(100); //some id 7: INotifyPropertyChanged inpc = customer as INotifyPropertyChanged; 8: inpc.PropertyChanged += delegate(Object sender, PropertyChangedEventArgs e) 9: { 10: //fired when a property changes 11: }; 12: customer.Address = "some other address"; //will raise PropertyChanged 13: customer.RecentOrders.ToList(); //will trigger the lazy loading 14: } 15: } Any problems, questions, do drop me a line!

  Read the article

• How to Buy an SD Card: Speed Classes, Sizes, and Capacities Explained

  - by Chris Hoffman

  Memory cards are used in digital cameras, music players, smartphones, tablets, and even laptops. But not all SD cards are created equal — there are different speed classes, physical sizes, and capacities to consider. Different devices require different types of SD cards. Here are the differences you’ll need to keep in mind when picking out the right SD card for your device. Speed Class In a nutshell, not all SD cards offer the same speeds. This matters for some tasks more than it matters for others. For example, if you’re a professional photographer taking photos in rapid succession on a DSLR camera saving them in high-resolution RAW format, you’ll want a fast SD card so your camera can save them as fast as possible. A fast SD card is also important if you want to record high-resolution video and save it directly to the SD card. If you’re just taking a few photos on a typical consumer camera or you’re just using an SD card to store some media files on your smartphone, the speed isn’t as important. Manufacturers use “speed classes” to measure an SD card’s speed. The SD Association that defines the SD card standard doesn’t actually define the exact speeds associated with these classes, but they do provide guidelines. There are four different speed classes — 10, 8, 4, and 2. 10 is the fastest, while 2 is the slowest. Class 2 is suitable for standard definition video recording, while classes 4 and 6 are suitable for high-definition video recording. Class 10 is suitable for “full HD video recording” and “HD still consecutive recording.” There are also two Ultra High Speed (UHS) speed classes, but they’re more expensive and are designed for professional use. UHS cards are designed for devices that support UHS. Here are the associated logos, in order from slowest to fastest:       You’ll probably be okay with a class 4 or 6 card for typical use in a digital camera, smartphone, or tablet. Class 10 cards are ideal if you’re shooting high-resolution videos or RAW photos. Class 2 cards are a bit on the slow side these days, so you may want to avoid them for all but the cheapest digital cameras. Even a cheap smartphone can record HD video, after all. An SD card’s speed class is identified on the SD card itself. You’ll also see the speed class on the online store listing or on the card’s packaging when purchasing it. For example, in the below photo, the middle SD card is speed class 4, while the two other cards are speed class 6. If you see no speed class symbol, you have a class 0 SD card. These cards were designed and produced before the speed class rating system was introduced. They may be slower than even a class 2 card. Physical Size Different devices use different sizes of SD cards. You’ll find standard-size CD cards, miniSD cards, and microSD cards. Standard SD cards are the largest, although they’re still very small. They measure 32x24x2.1 mm and weigh just two grams. Most consumer digital cameras for sale today still use standard SD cards. They have the standard “cut corner”  design. miniSD cards are smaller than standard SD cards, measuring 21.5x20x1.4 mm and weighing about 0.8 grams. This is the least common size today. miniSD cards were designed to be especially small for mobile phones, but we now have a smaller size. microSD cards are the smallest size of SD card, measuring 15x11x1 mm and weighing just 0.25 grams. These cards are used in most cell phones and smartphones that support SD cards. They’re also used in many other devices, such as tablets. SD cards will only fit into marching slots. You can’t plug a microSD card into a standard SD card slot — it won’t fit. However, you can purchase an adapter that allows you to plug a smaller SD card into a larger SD card’s form and fit it into the appropriate slot. Capacity Like USB flash drives, hard drives, solid-state drives, and other storage media, different SD cards can have different amounts of storage. But the differences between SD card capacities don’t stop there. Standard SDSC (SD) cards are 1 MB to 2 GB in size, or perhaps 4 GB in size — although 4 GB is non-standard. The SDHC standard was created later, and allows cards 2 GB to 32 GB in size. SDXC is a more recent standard that allows cards 32 GB to 2 TB in size. You’ll need a device that supports SDHC or SDXC cards to use them. At this point, the vast majority of devices should support SDHC. In fact, the SD cards you have are probably SDHC cards. SDXC is newer and less common. When buying an SD card, you’ll need to buy the right speed class, size, and capacity for your needs. Be sure to check what your device supports and consider what speed and capacity you’ll actually need. Image Credit: Ryosuke SEKIDO on Flickr, Clive Darra on Flickr, Steven Depolo on Flickr

  Read the article

• How does one find out which application is associated with an indicator icon?

  - by Amos Annoy

  It is trivial to do this in Ubuntu 10.04. The question is specific to Ubuntu 12.04. some pertinent references (src: answer to What is the difference between indicators and a system tray?: Here is the documentation for indicators: Application indicators | Ubuntu App Developer libindicate Reference Manual libappindicator Reference Manual also DesktopExperienceTeam/ApplicationIndicators - Ubuntu Wiki ref: How can the application that makes an indicator icon be identified? bookmark: How does one find out which application is associated with an indicator icon in Ubuntu 12.04? is a serious question for reasons & problems outlined below and for which a significant investment has been made and is necessary for remedial purposes. reviewing refs. to find an orchestrated resolution ... (an indicator ap. indicator maybe needed) This has nothing to do (does it?) with right click. How can an indicator's icon in Ubuntu 12.04 be matched with the program responsible for it's manifestation on the top panel? A list of running applications can include all processes using System Monitor. How is the correct matching process found for an indicator? How are the sub-indicator applications identified? These are the aps associated with the components of an indicators drop-down menu. (This was to be a separate question and quite naturally follows up the progression. It is included here as it is obvious there is no provisioning to track down offending either sub or indicator aps. easily.) (The examination of SM points out a rather poignant factor in the faster battery depletion and shortened run time - the ambient quiescent CPU rate in 12.04 is now well over 20% when previously, in 10.04, it was well under 10%, between 5% and 7%! - the huge inordinate cpu overhead originates from Xorg and compiz - after booting the system, only SM is run and All Processes are selected, sorting on %CPU - switching between Resources and Processes profiles the execution overhead problem - running another ap like gedit "Text Editor" briefly gives it CPU priority - going back to S&M several aps. are at the top of the list in order: gnome-system-monitor as expected, then: Xorg, compiz, unity-panel-service, hud-service, with dbus-daemon and kworker/x:y's mixed in with some expected daemons and background tasks like nm-applet - not only do Xorg and compiz require excessive CPU time but their entourage has to come along too! further exacerbating the problem - our compute bound tasks no longer work effectively in the field - reduced battery life, reduced CPU time for custom ap.s etc. - and all this precipitated from an examination of what is going on with the battery ap. indicator - this was and is not a flippant, rhetorical or idle musing but has consequences for the credible deployment of 12.04 to reduce the negative impact of its overhead in a production environment) (I have a problem with the battery indicator - it sometimes has % and other times hh:mm - it is necessary to know the ap. & v. to get more info on controlling same. ditto: There are issues with other indicator aps.: NM vs. iwlist/iwconfig conflict, BT ap. vs RF switch, Battery ap. w/ no suspend/sleep for poor battery runtime, ... the list goes on) Details from: How can I find Application Indicator ID's? suggests looking at: file:///usr/share/indicator-application/ordering-override.keyfile [Ordering Index Overrides] nm-applet=1 gnome-power-manager=2 ibus=3 gst-keyboard-xkb=4 gsd-keyboard-xkb=5 which solves the battery ap. identification, and presumably nm is NetworkManager for the rf icon, but the envelope, blue tooth and speaker indicator aps. are still a mystery. (Also, the ordering is not correlated.) Mind you, it was simple in the past to simply right click to get the About option to find the ap. & v. info. browsing around and about: file:///usr/share/indicator-application/ordering-override.keyfile examined: file:///usr/share/indicators file:///usr/share/indicators/messages/applications/ ... perhaps?/presumably? the information sought may be buried in file:///usr/share/indicators A reference in the comments was given to: What is the difference between indicators and a system tray? quoting from that source ... Unfortunately desktop indicators are not well documented yet: I couldn't find any specification doc ... Well ... the actual document https://wiki.ubuntu.com/DesktopExperienceTeam/ApplicationIndicators#Summary does not help much but it's existential information provides considerable insight ...

  Read the article

< Previous Page | 639 640 641 642 643 644 645 646 647 648 649 650  | Next Page >