Search Results

Search found 16987 results on 680 pages for 'second'.

Page 643/680 | < Previous Page | 639 640 641 642 643 644 645 646 647 648 649 650  | Next Page >

• Proper network configuration for a KVM guest to be on the same networks at the host

  - by Steve Madsen

  I am running a Debian Linux server on Lenny. Within it, I am running another Lenny instance using KVM. Both servers are externally available, with public IPs, as well as a second interface with private IPs for the LAN. Everything works fine, except the VM sees all network traffic as originating from the host server. I suspect this might have something to do with the iptables-based firewall I'm running on the host. What I'd like to figure out is: how to I properly configure the host's networking such that all of these requirements are met? Both host and VMs have 2 network interfaces (public and private). Both host and VMs can be independently firewalled. Ideally, VM traffic does not have to traverse the host firewall. VMs see real remote IP addresses, not the host's. Currently, the host's network interfaces are configured as bridges. eth0 and eth1 do not have IP addresses assigned to them, but br0 and br1 do. /etc/network/interfaces on the host: # The primary network interface auto br1 iface br1 inet static address 24.123.138.34 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 gateway 24.123.138.33 bridge_ports eth1 bridge_stp off auto br1:0 iface br1:0 inet static address 24.123.138.36 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 # Internal network auto br0 iface br0 inet static address 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 bridge_ports eth0 bridge_stp off This is the libvirt/qemu configuration file for the VM: <domain type='kvm'> <name>apps</name> <uuid>636b6620-0949-bc88-3197-37153b88772e</uuid> <memory>393216</memory> <currentMemory>393216</currentMemory> <vcpu>1</vcpu> <os> <type arch='i686' machine='pc'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='cdrom'> <target dev='hdc' bus='ide'/> <readonly/> </disk> <disk type='file' device='disk'> <source file='/raid/kvm-images/apps.qcow2'/> <target dev='vda' bus='virtio'/> </disk> <interface type='bridge'> <mac address='54:52:00:27:5e:02'/> <source bridge='br0'/> <model type='virtio'/> </interface> <interface type='bridge'> <mac address='54:52:00:40:cc:7f'/> <source bridge='br1'/> <model type='virtio'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target port='0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> </devices> </domain> Along with the rest of my firewall rules, the firewalling script includes this command to pass packets destined for a KVM guest: # Allow bridged packets to pass (for KVM guests). iptables -A FORWARD -m physdev --physdev-is-bridged -j ACCEPT (Not applicable to this question, but a side-effect of my bridging configuration appears to be that I can't ever shut down cleanly. The kernel eventually tells me "unregister_netdevice: waiting for br1 to become free" and I have to hard reset the system. Maybe a sign I've done something dumb?)

  Read the article

• C# Extension Methods - To Extend or Not To Extend...

  - by James Michael Hare

  I've been thinking a lot about extension methods lately, and I must admit I both love them and hate them. They are a lot like sugar, they taste so nice and sweet, but they'll rot your teeth if you eat them too much.   I can't deny that they aren't useful and very handy. One of the major components of the Shared Component library where I work is a set of useful extension methods. But, I also can't deny that they tend to be overused and abused to willy-nilly extend every living type.   So what constitutes a good extension method? Obviously, you can write an extension method for nearly anything whether it is a good idea or not. Many times, in fact, an idea seems like a good extension method but in retrospect really doesn't fit.   So what's the litmus test? To me, an extension method should be like in the movies when a person runs into their twin, separated at birth. You just know you're related. Obviously, that's hard to quantify, so let's try to put a few rules-of-thumb around them.   A good extension method should:     Apply to any possible instance of the type it extends.     Simplify logic and improve readability/maintainability.     Apply to the most specific type or interface applicable.     Be isolated in a namespace so that it does not pollute IntelliSense.     So let's look at a few examples in relation to these rules.   The first rule, to me, is the most important of all. Once again, it bears repeating, a good extension method should apply to all possible instances of the type it extends. It should feel like the long lost relative that should have been included in the original class but somehow was missing from the family tree.    Take this nifty little int extension, I saw this once in a blog and at first I really thought it was pretty cool, but then I started noticing a code smell I couldn't quite put my finger on. So let's look:       public static class IntExtensinos     {         public static int Seconds(int num)         {             return num * 1000;         }           public static int Minutes(int num)         {             return num * 60000;         }     }     This is so you could do things like:       ...     Thread.Sleep(5.Seconds());     ...     proxy.Timeout = 1.Minutes();     ...     Awww, you say, that's cute! Well, that's the problem, it's kitschy and it doesn't always apply (and incidentally you could achieve the same thing with TimeStamp.FromSeconds(5)). It's syntactical candy that looks cool, but tends to rot and pollute the code. It would allow things like:       total += numberOfTodaysOrders.Seconds();     which makes no sense and should never be allowed. The problem is you're applying an extension method to a logical domain, not a type domain. That is, the extension method Seconds() doesn't really apply to ALL ints, it applies to ints that are representative of time that you want to convert to milliseconds.    Do you see what I mean? The two problems, in a nutshell, are that a) Seconds() called off a non-time value makes no sense and b) calling Seconds() off something to pass to something that does not take milliseconds will be off by a factor of 1000 or worse.   Thus, in my mind, you should only ever have an extension method that applies to the whole domain of that type.   For example, this is one of my personal favorites:       public static bool IsBetween<T>(this T value, T low, T high)         where T : IComparable<T>     {         return value.CompareTo(low) >= 0 && value.CompareTo(high) <= 0;     }   This allows you to check if any IComparable<T> is within an upper and lower bound. Think of how many times you type something like:       if (response.Employee.Address.YearsAt >= 2         && response.Employee.Address.YearsAt <= 10)     {     ...     }     Now, you can instead type:       if(response.Employee.Address.YearsAt.IsBetween(2, 10))     {     ...     }     Note that this applies to all IComparable<T> -- that's ints, chars, strings, DateTime, etc -- and does not depend on any logical domain. In addition, it satisfies the second point and actually makes the code more readable and maintainable.   Let's look at the third point. In it we said that an extension method should fit the most specific interface or type possible. Now, I'm not saying if you have something that applies to enumerables, you create an extension for List, Array, Dictionary, etc (though you may have reasons for doing so), but that you should beware of making things TOO general.   For example, let's say we had an extension method like this:       public static T ConvertTo<T>(this object value)     {         return (T)Convert.ChangeType(value, typeof(T));     }         This lets you do more fluent conversions like:       double d = "5.0".ConvertTo<double>();     However, if you dig into Reflector (LOVE that tool) you will see that if the type you are calling on does not implement IConvertible, what you convert to MUST be the exact type or it will throw an InvalidCastException. Now this may or may not be what you want in this situation, and I leave that up to you. Things like this would fail:       object value = new Employee();     ...     // class cast exception because typeof(IEmployee) != typeof(Employee)     IEmployee emp = value.ConvertTo<IEmployee>();       Yes, that's a downfall of working with Convertible in general, but if you wanted your fluent interface to be more type-safe so that ConvertTo were only callable on IConvertibles (and let casting be a manual task), you could easily make it:         public static T ConvertTo<T>(this IConvertible value)     {         return (T)Convert.ChangeType(value, typeof(T));     }         This is what I mean by choosing the best type to extend. Consider that if we used the previous (object) version, every time we typed a dot ('.') on an instance we'd pull up ConvertTo() whether it was applicable or not. By filtering our extension method down to only valid types (those that implement IConvertible) we greatly reduce our IntelliSense pollution and apply a good level of compile-time correctness.   Now my fourth rule is just my general rule-of-thumb. Obviously, you can make extension methods as in-your-face as you want. I included all mine in my work libraries in its own sub-namespace, something akin to:       namespace Shared.Core.Extensions { ... }     This is in a library called Shared.Core, so just referencing the Core library doesn't pollute your IntelliSense, you have to actually do a using on Shared.Core.Extensions to bring the methods in. This is very similar to the way Microsoft puts its extension methods in System.Linq. This way, if you want 'em, you use the appropriate namespace. If you don't want 'em, they won't pollute your namespace.   To really make this work, however, that namespace should only include extension methods and subordinate types those extensions themselves may use. If you plant other useful classes in those namespaces, once a user includes it, they get all the extensions too.   Also, just as a personal preference, extension methods that aren't simply syntactical shortcuts, I like to put in a static utility class and then have extension methods for syntactical candy. For instance, I think it imaginable that any object could be converted to XML:       namespace Shared.Core     {         // A collection of XML Utility classes         public static class XmlUtility         {             ...             // Serialize an object into an xml string             public static string ToXml(object input)             {                 var xs = new XmlSerializer(input.GetType());                   // use new UTF8Encoding here, not Encoding.UTF8. The later includes                 // the BOM which screws up subsequent reads, the former does not.                 using (var memoryStream = new MemoryStream())                 using (var xmlTextWriter = new XmlTextWriter(memoryStream, new UTF8Encoding()))                 {                     xs.Serialize(xmlTextWriter, input);                     return Encoding.UTF8.GetString(memoryStream.ToArray());                 }             }             ...         }     }   I also wanted to be able to call this from an object like:       value.ToXml();     But here's the problem, if i made this an extension method from the start with that one little keyword "this", it would pop into IntelliSense for all objects which could be very polluting. Instead, I put the logic into a utility class so that users have the choice of whether or not they want to use it as just a class and not pollute IntelliSense, then in my extensions namespace, I add the syntactical candy:       namespace Shared.Core.Extensions     {         public static class XmlExtensions         {             public static string ToXml(this object value)             {                 return XmlUtility.ToXml(value);             }         }     }   So now it's the best of both worlds. On one hand, they can use the utility class if they don't want to pollute IntelliSense, and on the other hand they can include the Extensions namespace and use as an extension if they want. The neat thing is it also adheres to the Single Responsibility Principle. The XmlUtility is responsible for converting objects to XML, and the XmlExtensions is responsible for extending object's interface for ToXml().

  Read the article

• The blocking nature of aggregates

  - by Rob Farley

  I wrote a post recently about how query tuning isn’t just about how quickly the query runs – that if you have something (such as SSIS) that is consuming your data (and probably introducing a bottleneck), then it might be more important to have a query which focuses on getting the first bit of data out. You can read that post here.  In particular, we looked at two operators that could be used to ensure that a query returns only Distinct rows. and The Sort operator pulls in all the data, sorts it (discarding duplicates), and then pushes out the remaining rows. The Hash Match operator performs a Hashing function on each row as it comes in, and then looks to see if it’s created a Hash it’s seen before. If not, it pushes the row out. The Sort method is quicker, but has to wait until it’s gathered all the data before it can do the sort, and therefore blocks the data flow. But that was my last post. This one’s a bit different. This post is going to look at how Aggregate functions work, which ties nicely into this month’s T-SQL Tuesday. I’ve frequently explained about the fact that DISTINCT and GROUP BY are essentially the same function, although DISTINCT is the poorer cousin because you have less control over it, and you can’t apply aggregate functions. Just like the operators used for Distinct, there are different flavours of Aggregate operators – coming in blocking and non-blocking varieties. The example I like to use to explain this is a pile of playing cards. If I’m handed a pile of cards and asked to count how many cards there are in each suit, it’s going to help if the cards are already ordered. Suppose I’m playing a game of Bridge, I can easily glance at my hand and count how many there are in each suit, because I keep the pile of cards in order. Moving from left to right, I could tell you I have four Hearts in my hand, even before I’ve got to the end. By telling you that I have four Hearts as soon as I know, I demonstrate the principle of a non-blocking operation. This is known as a Stream Aggregate operation. It requires input which is sorted by whichever columns the grouping is on, and it will release a row as soon as the group changes – when I encounter a Spade, I know I don’t have any more Hearts in my hand. Alternatively, if the pile of cards are not sorted, I won’t know how many Hearts I have until I’ve looked through all the cards. In fact, to count them, I basically need to put them into little piles, and when I’ve finished making all those piles, I can count how many there are in each. Because I don’t know any of the final numbers until I’ve seen all the cards, this is blocking. This performs the aggregate function using a Hash Match. Observant readers will remember this from my Distinct example. You might remember that my earlier Hash Match operation – used for Distinct Flow – wasn’t blocking. But this one is. They’re essentially doing a similar operation, applying a Hash function to some data and seeing if the set of values have been seen before, but before, it needs more information than the mere existence of a new set of values, it needs to consider how many of them there are. A lot is dependent here on whether the data coming out of the source is sorted or not, and this is largely determined by the indexes that are being used. If you look in the Properties of an Index Scan, you’ll be able to see whether the order of the data is required by the plan. A property called Ordered will demonstrate this. In this particular example, the second plan is significantly faster, but is dependent on having ordered data. In fact, if I force a Stream Aggregate on unordered data (which I’m doing by telling it to use a different index), a Sort operation is needed, which makes my plan a lot slower. This is all very straight-forward stuff, and information that most people are fully aware of. I’m sure you’ve all read my good friend Paul White (@sql_kiwi)’s post on how the Query Optimizer chooses which type of aggregate function to apply. But let’s take a look at SQL Server Integration Services. SSIS gives us a Aggregate transformation for use in Data Flow Tasks, but it’s described as Blocking. The definitive article on Performance Tuning SSIS uses Sort and Aggregate as examples of Blocking Transformations. I’ve just shown you that Aggregate operations used by the Query Optimizer are not always blocking, but that the SSIS Aggregate component is an example of a blocking transformation. But is it always the case? After all, there are plenty of SSIS Performance Tuning talks out there that describe the value of sorted data in Data Flow Tasks, describing the IsSorted property that can be set through the Advanced Editor of your Source component. And so I set about testing the Aggregate transformation in SSIS, to prove for sure whether providing Sorted data would let the Aggregate transform behave like a Stream Aggregate. (Of course, I knew the answer already, but it helps to be able to demonstrate these things). A query that will produce a million rows in order was in order. Let me rephrase. I used a query which produced the numbers from 1 to 1000000, in a single field, ordered. The IsSorted flag was set on the source output, with the only column as SortKey 1. Performing an Aggregate function over this (counting the number of rows per distinct number) should produce an additional column with 1 in it. If this were being done in T-SQL, the ordered data would allow a Stream Aggregate to be used. In fact, if the Query Optimizer saw that the field had a Unique Index on it, it would be able to skip the Aggregate function completely, and just insert the value 1. This is a shortcut I wouldn’t be expecting from SSIS, but certainly the Stream behaviour would be nice. Unfortunately, it’s not the case. As you can see from the screenshots above, the data is pouring into the Aggregate function, and not being released until all million rows have been seen. It’s not doing a Stream Aggregate at all. This is expected behaviour. (I put that in bold, because I want you to realise this.) An SSIS transformation is a piece of code that runs. It’s a physical operation. When you write T-SQL and ask for an aggregation to be done, it’s a logical operation. The physical operation is either a Stream Aggregate or a Hash Match. In SSIS, you’re telling the system that you want a generic Aggregation, that will have to work with whatever data is passed in. I’m not saying that it wouldn’t be possible to make a sometimes-blocking aggregation component in SSIS. A Custom Component could be created which could detect whether the SortKeys columns of the input matched the Grouping columns of the Aggregation, and either call the blocking code or the non-blocking code as appropriate. One day I’ll make one of those, and publish it on my blog. I’ve done it before with a Script Component, but as Script components are single-use, I was able to handle the data knowing everything about my data flow already. As per my previous post – there are a lot of aspects in which tuning SSIS and tuning execution plans use similar concepts. In both situations, it really helps to have a feel for what’s going on behind the scenes. Considering whether an operation is blocking or not is extremely relevant to performance, and that it’s not always obvious from the surface. In a future post, I’ll show the impact of blocking v non-blocking and synchronous v asynchronous components in SSIS, using some of LobsterPot’s Script Components and Custom Components as examples. When I get that sorted, I’ll make a Stream Aggregate component available for download.

  Read the article

• CodePlex Daily Summary for Tuesday, May 29, 2012

  CodePlex Daily Summary for Tuesday, May 29, 2012Popular ReleasesDotNetNuke Azure Accelerator: DotNetNuke Azure Accelerator 6.2: Windows Azure deployments of DotNetNuke Community using virtual hard drive (cloud-drive) image that is created dynamically on the cloud. Enables the creation of new DotNetNuke host instances from on-premise to the cloud using a wizard that guides you on this process, creating the SQL Azure database, uploading the solution engine and associated service configurations. New features in this releaseModified the web roles endpoints to allow traffic on port 443 Changed the package unzip operati...Thales Simulator Library: Version 0.9.6: The Thales Simulator Library is an implementation of a software emulation of the Thales (formerly Zaxus & Racal) Hardware Security Module cryptographic device. This release fixes a problem with the FK command and a bug in the implementation of PIN block 05 format deconstruction. A new 0.9.6.Binaries file has been posted. This includes executable programs without an installer, including the GUI and console simulators, the key manager and the PVV clashing demo. Please note that you will need ...myManga: myManga v1.0.0.2: Fixed the 'Lost+Brain' error on MangaReader. The main download has this update. The second download is for those who have already downloaded the old v1.0.0.2. DELETE OLD EXE and DLLs before you copy the new files over.To update from v1.0.0.1:Extract new myManga EXE and DLLs from Zip to folder of choosing. Copy MangaInfo and MangaArchives folder from old myManga folder to new folder from step 1. ORDelete: The new myManga.exe contains the CoreMangaClasses.dll and Manga.dll internally. Delet...????: ????2.0.1: 1、?????。WiX Toolset: WiX v3.6 RC: WiX v3.6 RC (3.6.2928.0) provides feature complete Burn with VS11 support. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/5/28/WiX-v3.6-Release-Candidate-availableJavascript .NET: Javascript .NET v0.7: SetParameter() reverts to its old behaviour of allowing JavaScript code to add new properties to wrapped C# objects. The behavior added briefly in 0.6 (throws an exception) can be had via the new SetParameterOptions.RejectUnknownProperties. TerminateExecution now uses its isolate to terminate the correct context automatically. Added support for converting all C# integral types, decimal and enums to JavaScript numbers. (Previously only the common types were handled properly.) Bug fixe...Indent Guides for Visual Studio: Indent Guides v12: Version History Changed in v12: background document analysis new options dialog with Quick Set selections for behavior new "glow" style for guides new menu icon in VS 11 preview control now uses editor theming highlighting can be customised on each line fixed issues with collapsed code blocks improved behaviour around left-aligned pragma/preprocessor commands (C#/C++) new settings for controlling guides in empty lines restructured settings storage (should be more reliable) ...callisto: callisto 2.0.29: Added DNS functionality to scripting. See documentation section for details of how to incorporate this into your scripts.ZXMAK2: Version 2.6.2.2: - implemented read port #7FFD glitch for ULA128 (fusetest) - fix unhandled exception inside open dialog - fix Z80 format serializer (support 55 bytes header & non compressed 128 blocks - thanks to Ralf) This release include SPRINTER emulation, but boot system disk image was removed.Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (May 2012): Fixes: unserialize() of negative float numbers fix pcre possesive quantifiers and character class containing ()[] array deserilization when the array contains a reference to ISerializable parsing lambda function fix round() reimplemented as it is in PHP to avoid .NET rounding errors filesize bypass for FileInfo.Length bug in Mono New features: Time zones reimplemented, uses Windows/Linux databaseSharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.1): New fetures:Admin enable / disable match Hide/Show Euro 2012 SharePoint lists (3 lists) Installing SharePoint Euro 2012 PredictorSharePoint Euro 2012 Predictor has been developed as a SharePoint Sandbox solution to support SharePoint Online (Office 365) Download the solution havivi.euro2012.wsp from the download page: Downloads Upload this solution to your Site Collection via the solutions area. Click on Activate to make the web parts in the solution available for use in the Site C...ScreenShot: InstallScreenShot: This is the current stable release.????SDK for .Net 4.0+(OAuth2.0+??V2?API): ??V2?SDK???: ????SDK for .Net 4.X???????PHP?SDK???OAuth??API???Client???。 ??????API?? ???????OAuth2.0???? ???：????????，DEMO??AppKey????????????????，?????AppKey，????AppKey???????????，?????“????>????>????>??????”.Net Code Samples: Code Samples: Code samples (SLNs).LINQ_Koans: LinqKoans v.02: Cleaned up a bitExpression Tree Visualizer for VS 2010: Expression Tree Visualizer Beta: This is a beta release, in this release some expression types are not handled and use a default visualization behavior. The first release will be published soon. Wait for it...Ulfi: Ulfi source: Build with Visual Studio 2010 Express C# or betterJayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.0 RC1 Refresh 2: JayData is a unified data access library for JavaScript developers to query and update data from different sources like webSQL, indexedDB, OData, Facebook or YQL. See it in action in this 6 minutes video: http://www.youtube.com/watch?v=LlJHgj1y0CU RC1 R2 Release highlights Knockout.js integrationUsing the Knockout.js module, your UI can be automatically refreshed when the data model changes, so you can develop the front-end of your data manager app even faster. Querying 1:N relations in W...Christoc's DotNetNuke Module Development Template: 00.00.08 for DNN6: BEFORE USE YOU need to install the MSBuild Community Tasks available from http://msbuildtasks.tigris.org For best results you should configure your development environment as described in this blog post Then read this latest blog post about customizing and using these custom templates. Installation is simple To use this template place the ZIP (not extracted) file in your My Documents\Visual Studio 2010\Templates\ProjectTemplates\Visual C#\Web OR for VB My Documents\Visual Studio 2010\Te...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.53: fix issue #18106, where member operators on numeric literals caused the member part to be duplicated when not minifying numeric literals ADD NEW FEATURE: ability to create source map files! The first mapfile format to be supported is the Script# format. Use the new -map filename switch to create map files when building your sources.New ProjectsActive Log Reader: The active log reader provides the ability for a client to subscribe to specific changes in a set of files in a directory. For example, it allows you to actively monitor all .log files in your C:\Windows directory (and sub-directories) and callback whenever the word "ERROR" shows up (or any regular expression you can come up with). The accompanying test project outlines example usage.ADO.NET light wrapper: ADO.NET light wrapper is thin IEnumerable layer about ADO.NET for provide easy way to access data with strong typing support. Allen Neighborhood Center: Allen Neighborhood Center data interactionsCildads: The first attempt at centryCMT: Course Management Tool ProjectCode Builder: this is the Builder project.Connect: this is the Connect project.Craig's Framework: A basic framework that is used to speed up building MVC applications and make certain things simpler.CRM 2011 Fetch XML Execute Tool: This is a dev tool used to execute fetch xml to get the results from the connected CRM 2011 instanceDallasDB: A struct based database. DallasDB will have no full functionality until at least version 0.0.1, and won't be ready for professional use until version 1.0.0. EasyMvc: It provides a trainning sample to develop a web application base on MVC3 EF4.0 SQL Compact 4. Besides, a common business permission, logging, configration have been applied simply. Share with some implement idea about web, mvc, jquery,orm. Appreciate your advice.Entity: this is the Entity project.FogLampz: FogLampz is a .NET wrapper around around the FogBugz API.Geeba: Geeba Forum for Students in BGU UniversityHibernate: this is the Hibernate project.JSense - IntelliSense for JavaScript: JSense provides JavaScript IntelliSense meta-automation for Visual Studio 2010 projectsMichael: this is Michael's project.ModAdder: Minecraft Mod InstallerMVVM ORM: The purpose of MVVM ORM is to create models and their interactions as defined in some database for WPF applications Models are derived from tables, views and stored procedures. Interactions include insert/update/delete, with FK relationships taken into account. nihao: The summary is required.Report: this is the Report project.REST Start Kit for BizTalk: This project enables BizTalk Server to expose RESTFul services through the WCF-Custom adapter. The library supports both receive and send, both XML and JSON with all HTTP verbs (GET, POST, PUT and DELETE). The solution is based on two custom WCF behaviors, one to be used on Receive Locations and one on Send Ports. Hopeully you'll find them easy to use, but if you have any issues, please use the discussions forum.RovignetaWinPhone7: bla bla blaScreenShot: A simple utility that enhances the experience of taking screenshots and annotating them. And all of it happens with the screenshot key that you are most used to. PrintScreen. Give it a try. You will forget the traditional tedious screenshot mechanism.SDM Exam 2012: This is an exam project for 4th semester.Struts: this is the Struts project.TheStoreDepot: depot for the StoreTibiaBot: TibiaBot is an open source application dedicated to extend your gaming experience in MMORPG game called Tibia. Besides of very many built-in functions, TibiaBot has implemented IronRuby script engine, which allows You to creating new functionality to base program.TopicInterDisciplinary: Topic inter-disciplinary owner: sherry, chen1984yangWebAppMatrix: ??WebApp??，?????！

  Read the article

• Improving Manageability of Virtual Environments

  - by Jeff Victor

  Boot Environments for Solaris 10 Branded Zones Until recently, Solaris 10 Branded Zones on Solaris 11 suffered one notable regression: Live Upgrade did not work. The individual packaging and patching tools work correctly, but the ability to upgrade Solaris while the production workload continued running did not exist. A recent Solaris 11 SRU (Solaris 11.1 SRU 6.4) restored most of that functionality, although with a slightly different concept, different commands, and without all of the feature details. This new method gives you the ability to create and manage multiple boot environments (BEs) for a Solaris 10 Branded Zone, and modify the active or any inactive BE, and to do so while the production workload continues to run. Background In case you are new to Solaris: Solaris includes a set of features that enables you to create a bootable Solaris image, called a Boot Environment (BE). This newly created image can be modified while the original BE is still running your workload(s). There are many benefits, including improved uptime and the ability to reboot into (or downgrade to) an older BE if a newer one has a problem. In Solaris 10 this set of features was named Live Upgrade. Solaris 11 applies the same basic concepts to the new packaging system (IPS) but there isn't a specific name for the feature set. The features are simply part of IPS. Solaris 11 Boot Environments are not discussed in this blog entry. Although a Solaris 10 system can have multiple BEs, until recently a Solaris 10 Branded Zone (BZ) in a Solaris 11 system did not have this ability. This limitation was addressed recently, and that enhancement is the subject of this blog entry. This new implementation uses two concepts. The first is the use of a ZFS clone for each BE. This makes it very easy to create a BE, or many BEs. This is a distinct advantage over the Live Upgrade feature set in Solaris 10, which had a practical limitation of two BEs on a system, when using UFS. The second new concept is a very simple mechanism to indicate the BE that should be booted: a ZFS property. The new ZFS property is named com.oracle.zones.solaris10:activebe (isn't that creative? ). It's important to note that the property is inherited from the original BE's file system to any BEs you create. In other words, all BEs in one zone have the same value for that property. When the (Solaris 11) global zone boots the Solaris 10 BZ, it boots the BE that has the name that is stored in the activebe property. Here is a quick summary of the actions you can use to manage these BEs: To create a BE: Create a ZFS clone of the zone's root dataset To activate a BE: Set the ZFS property of the root dataset to indicate the BE To add a package or patch to an inactive BE: Mount the inactive BE Add packages or patches to it Unmount the inactive BE To list the available BEs: Use the "zfs list" command. To destroy a BE: Use the "zfs destroy" command. Preparation Before you can use the new features, you will need a Solaris 10 BZ on a Solaris 11 system. You can use these three steps - on a real Solaris 11.1 server or in a VirtualBox guest running Solaris 11.1 - to create a Solaris 10 BZ. The Solaris 11.1 environment must be at SRU 6.4 or newer. Create a flash archive on the Solaris 10 system s10# flarcreate -n s10-system /net/zones/archives/s10-system.flar Configure the Solaris 10 BZ on the Solaris 11 system s11# zonecfg -z s10z Use 'create' to begin configuring a new zone. zonecfg:s10z create -t SYSsolaris10 zonecfg:s10z set zonepath=/zones/s10z zonecfg:s10z exit s11# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - s10z configured /zones/s10z solaris10 excl Install the zone from the flash archive s11# zoneadm -z s10z install -a /net/zones/archives/s10-system.flar -p You can find more information about the migration of Solaris 10 environments to Solaris 10 Branded Zones in the documentation. The rest of this blog entry demonstrates the commands you can use to accomplish the aforementioned actions related to BEs. New features in action Note that the demonstration of the commands occurs in the Solaris 10 BZ, as indicated by the shell prompt "s10z# ". Many of these commands can be performed in the global zone instead, if you prefer. If you perform them in the global zone, you must change the ZFS file system names. Create The only complicated action is the creation of a BE. In the Solaris 10 BZ, create a new "boot environment" - a ZFS clone. You can assign any name to the final portion of the clone's name, as long as it meets the requirements for a ZFS file system name. s10z# zfs snapshot rpool/ROOT/zbe-0@snap s10z# zfs clone -o mountpoint=/ -o canmount=noauto rpool/ROOT/zbe-0@snap rpool/ROOT/newBE cannot mount 'rpool/ROOT/newBE' on '/': directory is not empty filesystem successfully created, but not mounted You can safely ignore that message: we already know that / is not empty! We have merely told ZFS that the default mountpoint for the clone is the root directory. List the available BEs and active BE Because each BE is represented by a clone of the rpool/ROOT dataset, listing the BEs is as simple as listing the clones. s10z# zfs list -r rpool/ROOT NAME USED AVAIL REFER MOUNTPOINT rpool/ROOT 3.55G 42.9G 31K legacy rpool/ROOT/zbe-0 1K 42.9G 3.55G / rpool/ROOT/newBE 3.55G 42.9G 3.55G / The output shows that two BEs exist. Their names are "zbe-0" and "newBE". You can tell Solaris that one particular BE should be used when the zone next boots by using a ZFS property. Its name is com.oracle.zones.solaris10:activebe. The value of that property is the name of the clone that contains the BE that should be booted. s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT NAME PROPERTY VALUE SOURCE rpool/ROOT com.oracle.zones.solaris10:activebe zbe-0 local Change the active BE When you want to change the BE that will be booted next time, you can just change the activebe property on the rpool/ROOT dataset. s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT NAME PROPERTY VALUE SOURCE rpool/ROOT com.oracle.zones.solaris10:activebe zbe-0 local s10z# zfs set com.oracle.zones.solaris10:activebe=newBE rpool/ROOT s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT NAME PROPERTY VALUE SOURCE rpool/ROOT com.oracle.zones.solaris10:activebe newBE local s10z# shutdown -y -g0 -i6 After the zone has rebooted: s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT rpool/ROOT com.oracle.zones.solaris10:activebe newBE local s10z# zfs mount rpool/ROOT/newBE / rpool/export /export rpool/export/home /export/home rpool /rpool Mount the original BE to see that it's still there. s10z# zfs mount -o mountpoint=/mnt rpool/ROOT/zbe-0 s10z# ls /mnt Desktop export platform Documents export.backup.20130607T214951Z proc S10Flar home rpool TT_DB kernel sbin bin lib system boot lost+found tmp cdrom mnt usr dev net var etc opt Patch an inactive BE At this point, you can modify the original BE. If you would prefer to modify the new BE, you can restore the original value to the activebe property and reboot, and then mount the new BE to /mnt (or another empty directory) and modify it. Let's mount the original BE so we can modify it. (The first command is only needed if you haven't already mounted that BE.) s10z# zfs mount -o mountpoint=/mnt rpool/ROOT/zbe-0 s10z# patchadd -R /mnt -M /var/sadm/spool 104945-02 Note that the typical usage will be: Create a BE Mount the new (inactive) BE Use the package and patch tools to update the new BE Unmount the new BE Reboot Delete an inactive BE ZFS clones are children of their parent file systems. In order to destroy the parent, you must first "promote" the child. This reverses the parent-child relationship. (For more information on this, see the documentation.) The original rpool/ROOT file system is the parent of the clones that you create as BEs. In order to destroy an earlier BE that is that parent of other BEs, you must first promote one of the child BEs to be the ZFS parent. Only then can you destroy the original BE. Fortunately, this is easier to do than to explain: s10z# zfs promote rpool/ROOT/newBE s10z# zfs destroy rpool/ROOT/zbe-0 s10z# zfs list -r rpool/ROOT NAME USED AVAIL REFER MOUNTPOINT rpool/ROOT 3.56G 269G 31K legacy rpool/ROOT/newBE 3.56G 269G 3.55G / Documentation This feature is so new, it is not yet described in the Solaris 11 documentation. However, MOS note 1558773.1 offers some details. Conclusion With this new feature, you can add and patch packages to boot environments of a Solaris 10 Branded Zone. This ability improves the manageability of these zones, and makes their use more practical. It also means that you can use the existing P2V tools with earlier Solaris 10 updates, and modify the environments after they become Solaris 10 Branded Zones.

  Read the article

• The blocking nature of aggregates

  - by Rob Farley

  I wrote a post recently about how query tuning isn’t just about how quickly the query runs – that if you have something (such as SSIS) that is consuming your data (and probably introducing a bottleneck), then it might be more important to have a query which focuses on getting the first bit of data out. You can read that post here.  In particular, we looked at two operators that could be used to ensure that a query returns only Distinct rows. and The Sort operator pulls in all the data, sorts it (discarding duplicates), and then pushes out the remaining rows. The Hash Match operator performs a Hashing function on each row as it comes in, and then looks to see if it’s created a Hash it’s seen before. If not, it pushes the row out. The Sort method is quicker, but has to wait until it’s gathered all the data before it can do the sort, and therefore blocks the data flow. But that was my last post. This one’s a bit different. This post is going to look at how Aggregate functions work, which ties nicely into this month’s T-SQL Tuesday. I’ve frequently explained about the fact that DISTINCT and GROUP BY are essentially the same function, although DISTINCT is the poorer cousin because you have less control over it, and you can’t apply aggregate functions. Just like the operators used for Distinct, there are different flavours of Aggregate operators – coming in blocking and non-blocking varieties. The example I like to use to explain this is a pile of playing cards. If I’m handed a pile of cards and asked to count how many cards there are in each suit, it’s going to help if the cards are already ordered. Suppose I’m playing a game of Bridge, I can easily glance at my hand and count how many there are in each suit, because I keep the pile of cards in order. Moving from left to right, I could tell you I have four Hearts in my hand, even before I’ve got to the end. By telling you that I have four Hearts as soon as I know, I demonstrate the principle of a non-blocking operation. This is known as a Stream Aggregate operation. It requires input which is sorted by whichever columns the grouping is on, and it will release a row as soon as the group changes – when I encounter a Spade, I know I don’t have any more Hearts in my hand. Alternatively, if the pile of cards are not sorted, I won’t know how many Hearts I have until I’ve looked through all the cards. In fact, to count them, I basically need to put them into little piles, and when I’ve finished making all those piles, I can count how many there are in each. Because I don’t know any of the final numbers until I’ve seen all the cards, this is blocking. This performs the aggregate function using a Hash Match. Observant readers will remember this from my Distinct example. You might remember that my earlier Hash Match operation – used for Distinct Flow – wasn’t blocking. But this one is. They’re essentially doing a similar operation, applying a Hash function to some data and seeing if the set of values have been seen before, but before, it needs more information than the mere existence of a new set of values, it needs to consider how many of them there are. A lot is dependent here on whether the data coming out of the source is sorted or not, and this is largely determined by the indexes that are being used. If you look in the Properties of an Index Scan, you’ll be able to see whether the order of the data is required by the plan. A property called Ordered will demonstrate this. In this particular example, the second plan is significantly faster, but is dependent on having ordered data. In fact, if I force a Stream Aggregate on unordered data (which I’m doing by telling it to use a different index), a Sort operation is needed, which makes my plan a lot slower. This is all very straight-forward stuff, and information that most people are fully aware of. I’m sure you’ve all read my good friend Paul White (@sql_kiwi)’s post on how the Query Optimizer chooses which type of aggregate function to apply. But let’s take a look at SQL Server Integration Services. SSIS gives us a Aggregate transformation for use in Data Flow Tasks, but it’s described as Blocking. The definitive article on Performance Tuning SSIS uses Sort and Aggregate as examples of Blocking Transformations. I’ve just shown you that Aggregate operations used by the Query Optimizer are not always blocking, but that the SSIS Aggregate component is an example of a blocking transformation. But is it always the case? After all, there are plenty of SSIS Performance Tuning talks out there that describe the value of sorted data in Data Flow Tasks, describing the IsSorted property that can be set through the Advanced Editor of your Source component. And so I set about testing the Aggregate transformation in SSIS, to prove for sure whether providing Sorted data would let the Aggregate transform behave like a Stream Aggregate. (Of course, I knew the answer already, but it helps to be able to demonstrate these things). A query that will produce a million rows in order was in order. Let me rephrase. I used a query which produced the numbers from 1 to 1000000, in a single field, ordered. The IsSorted flag was set on the source output, with the only column as SortKey 1. Performing an Aggregate function over this (counting the number of rows per distinct number) should produce an additional column with 1 in it. If this were being done in T-SQL, the ordered data would allow a Stream Aggregate to be used. In fact, if the Query Optimizer saw that the field had a Unique Index on it, it would be able to skip the Aggregate function completely, and just insert the value 1. This is a shortcut I wouldn’t be expecting from SSIS, but certainly the Stream behaviour would be nice. Unfortunately, it’s not the case. As you can see from the screenshots above, the data is pouring into the Aggregate function, and not being released until all million rows have been seen. It’s not doing a Stream Aggregate at all. This is expected behaviour. (I put that in bold, because I want you to realise this.) An SSIS transformation is a piece of code that runs. It’s a physical operation. When you write T-SQL and ask for an aggregation to be done, it’s a logical operation. The physical operation is either a Stream Aggregate or a Hash Match. In SSIS, you’re telling the system that you want a generic Aggregation, that will have to work with whatever data is passed in. I’m not saying that it wouldn’t be possible to make a sometimes-blocking aggregation component in SSIS. A Custom Component could be created which could detect whether the SortKeys columns of the input matched the Grouping columns of the Aggregation, and either call the blocking code or the non-blocking code as appropriate. One day I’ll make one of those, and publish it on my blog. I’ve done it before with a Script Component, but as Script components are single-use, I was able to handle the data knowing everything about my data flow already. As per my previous post – there are a lot of aspects in which tuning SSIS and tuning execution plans use similar concepts. In both situations, it really helps to have a feel for what’s going on behind the scenes. Considering whether an operation is blocking or not is extremely relevant to performance, and that it’s not always obvious from the surface. In a future post, I’ll show the impact of blocking v non-blocking and synchronous v asynchronous components in SSIS, using some of LobsterPot’s Script Components and Custom Components as examples. When I get that sorted, I’ll make a Stream Aggregate component available for download.

  Read the article

• Ajax Control Toolkit May 2012 Release

  - by Stephen.Walther

  I’m happy to announce the May 2012 release of the Ajax Control Toolkit. This newest release of the Ajax Control Toolkit includes a new file upload control which displays file upload progress. We’ve also added several significant enhancements to the existing HtmlEditorExtender control such as support for uploading images and Source View. You can download and start using the newest version of the Ajax Control Toolkit by entering the following command in the Library Package Manager console in Visual Studio: Install-Package AjaxControlToolkit Alternatively, you can download the latest version of the Ajax Control Toolkit from CodePlex: http://AjaxControlToolkit.CodePlex.com The New Ajax File Upload Control The most requested new feature for the Ajax Control Toolkit (according to the CodePlex Issue Tracker) has been support for file upload with progress. We worked hard over the last few months to create an entirely new file upload control which displays upload progress. Here is a sample which illustrates how you can use the new AjaxFileUpload control: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="01_FileUpload.aspx.cs" Inherits="WebApplication1._01_FileUpload" %> <html> <head runat="server"> <title>Simple File Upload</title> </head> <body> <form id="form1" runat="server"> <div> <ajaxToolkit:ToolkitScriptManager runat="server" /> <ajaxToolkit:AjaxFileUpload id="ajaxUpload1" OnUploadComplete="ajaxUpload1_OnUploadComplete" runat="server" /> </div> </form> </body> </html> The page above includes a ToolkitScriptManager control. This control is required to use any of the controls in the Ajax Control Toolkit because this control is responsible for loading all of the scripts required by a control. The page also contains an AjaxFileUpload control. The UploadComplete event is handled in the code-behind for the page: namespace WebApplication1 { public partial class _01_FileUpload : System.Web.UI.Page { protected void ajaxUpload1_OnUploadComplete(object sender, AjaxControlToolkit.AjaxFileUploadEventArgs e) { // Generate file path string filePath = "~/Images/" + e.FileName; // Save upload file to the file system ajaxUpload1.SaveAs(MapPath(filePath)); } } } The UploadComplete handler saves each uploaded file by calling the AjaxFileUpload control’s SaveAs() method with a full file path. Here’s a video which illustrates the process of uploading a file: Warning: in order to write to the Images folder on a production IIS server, you need Write permissions on the Images folder. You need to provide permissions for the IIS Application Pool account to write to the Images folder. To learn more, see: http://learn.iis.net/page.aspx/624/application-pool-identities/ Showing File Upload Progress The new AjaxFileUpload control takes advantage of HTML5 upload progress events (described in the XMLHttpRequest Level 2 standard). This standard is supported by Firefox 8+, Chrome 16+, Safari 5+, and Internet Explorer 10+. In other words, the standard is supported by the most recent versions of all browsers except for Internet Explorer which will support the standard with the release of Internet Explorer 10. The AjaxFileUpload control works with all browsers, even browsers which do not support the new XMLHttpRequest Level 2 standard. If you use the AjaxFileUpload control with a downlevel browser – such as Internet Explorer 9 — then you get a simple throbber image during a file upload instead of a progress indicator. Here’s how you specify a throbber image when declaring the AjaxFileUpload control: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="02_FileUpload.aspx.cs" Inherits="WebApplication1._02_FileUpload" %> <html> <head id="Head1" runat="server"> <title>File Upload with Throbber</title> </head> <body> <form id="form1" runat="server"> <div> <ajaxToolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" /> <ajaxToolkit:AjaxFileUpload id="ajaxUpload1" OnUploadComplete="ajaxUpload1_OnUploadComplete" ThrobberID="MyThrobber" runat="server" /> <asp:Image id="MyThrobber" ImageUrl="ajax-loader.gif" Style="display:None" runat="server" /> </div> </form> </body> </html> Notice that the page above includes an image with the Id MyThrobber. This image is displayed while files are being uploaded. I use the website http://AjaxLoad.info to generate animated busy wait images. Drag-And-Drop File Upload If you are using an uplevel browser then you can drag-and-drop the files which you want to upload onto the AjaxFileUpload control. The following video illustrates how drag-and-drop works: Remember that drag-and-drop will not work on Internet Explorer 9 or older. Accepting Multiple Files By default, the AjaxFileUpload control enables you to upload multiple files at a time. When you open the file dialog, use the CTRL or SHIFT key to select multiple files. If you want to restrict the number of files that can be uploaded then use the MaximumNumberOfFiles property like this: <ajaxToolkit:AjaxFileUpload id="ajaxUpload1" OnUploadComplete="ajaxUpload1_OnUploadComplete" ThrobberID="throbber" MaximumNumberOfFiles="1" runat="server" /> In the code above, the maximum number of files which can be uploaded is restricted to a single file. Restricting Uploaded File Types You might want to allow only certain types of files to be uploaded. For example, you might want to accept only image uploads. In that case, you can use the AllowedFileTypes property to provide a list of allowed file types like this: <ajaxToolkit:AjaxFileUpload id="ajaxUpload1" OnUploadComplete="ajaxUpload1_OnUploadComplete" ThrobberID="throbber" AllowedFileTypes="jpg,jpeg,gif,png" runat="server" /> The code above prevents any files except jpeg, gif, and png files from being uploaded. Enhancements to the HTMLEditorExtender Over the past months, we spent a considerable amount of time making bug fixes and feature enhancements to the existing HtmlEditorExtender control. I want to focus on two of the most significant enhancements that we made to the control: support for Source View and support for uploading images. Adding Source View Support to the HtmlEditorExtender When you click the Source View tag, the HtmlEditorExtender changes modes and displays the HTML source of the contents contained in the TextBox being extended. You can use Source View to make fine-grain changes to HTML before submitting the HTML to the server. For reasons of backwards compatibility, the Source View tab is disabled by default. To enable Source View, you need to declare your HtmlEditorExtender with the DisplaySourceTab property like this: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="05_SourceView.aspx.cs" Inherits="WebApplication1._05_SourceView" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html> <head id="Head1" runat="server"> <title>HtmlEditorExtender with Source View</title> </head> <body> <form id="form1" runat="server"> <div> <ajaxToolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" /> <asp:TextBox id="txtComments" TextMode="MultiLine" Columns="60" Rows="10" Runat="server" /> <ajaxToolkit:HtmlEditorExtender id="HEE1" TargetControlID="txtComments" DisplaySourceTab="true" runat="server" /> </div> </form> </body> </html> The page above includes a ToolkitScriptManager, TextBox, and HtmlEditorExtender control. The HtmlEditorExtender extends the TextBox so that it supports rich text editing. Notice that the HtmlEditorExtender includes a DisplaySourceTab property. This property causes a button to appear at the bottom of the HtmlEditorExtender which enables you to switch to Source View: Note: when using the HtmlEditorExtender, we recommend that you set the DOCTYPE for the document. Otherwise, you can encounter weird formatting issues. Accepting Image Uploads We also enhanced the HtmlEditorExtender to support image uploads (another very highly requested feature at CodePlex). The following video illustrates the experience of adding an image to the editor: Once again, for backwards compatibility reasons, support for image uploads is disabled by default. Here’s how you can declare the HtmlEditorExtender so that it supports image uploads: <ajaxToolkit:HtmlEditorExtender id="MyHtmlEditorExtender" TargetControlID="txtComments" OnImageUploadComplete="MyHtmlEditorExtender_ImageUploadComplete" DisplaySourceTab="true" runat="server" > <Toolbar> <ajaxToolkit:Bold /> <ajaxToolkit:Italic /> <ajaxToolkit:Underline /> <ajaxToolkit:InsertImage /> </Toolbar> </ajaxToolkit:HtmlEditorExtender> There are two things that you should notice about the code above. First, notice that an InsertImage toolbar button is added to the HtmlEditorExtender toolbar. This HtmlEditorExtender will render toolbar buttons for bold, italic, underline, and insert image. Second, notice that the HtmlEditorExtender includes an event handler for the ImageUploadComplete event. The code for this event handler is below: using System.Web.UI; using AjaxControlToolkit; namespace WebApplication1 { public partial class _06_ImageUpload : System.Web.UI.Page { protected void MyHtmlEditorExtender_ImageUploadComplete(object sender, AjaxFileUploadEventArgs e) { // Generate file path string filePath = "~/Images/" + e.FileName; // Save uploaded file to the file system var ajaxFileUpload = (AjaxFileUpload)sender; ajaxFileUpload.SaveAs(MapPath(filePath)); // Update client with saved image path e.PostedUrl = Page.ResolveUrl(filePath); } } } Within the ImageUploadComplete event handler, you need to do two things: 1) Save the uploaded image (for example, to the file system, a database, or Azure storage) 2) Provide the URL to the saved image so the image can be displayed within the HtmlEditorExtender In the code above, the uploaded image is saved to the ~/Images folder. The path of the saved image is returned to the client by setting the AjaxFileUploadEventArgs PostedUrl property. Not surprisingly, under the covers, the HtmlEditorExtender uses the AjaxFileUpload. You can get a direct reference to the AjaxFileUpload control used by an HtmlEditorExtender by using the following code: void Page_Load() { var ajaxFileUpload = MyHtmlEditorExtender.AjaxFileUpload; ajaxFileUpload.AllowedFileTypes = "jpg,jpeg"; } The code above illustrates how you can restrict the types of images that can be uploaded to the HtmlEditorExtender. This code prevents anything but jpeg images from being uploaded. Summary This was the most difficult release of the Ajax Control Toolkit to date. We iterated through several designs for the AjaxFileUpload control – with each iteration, the goal was to make the AjaxFileUpload control easier for developers to use. My hope is that we were able to create a control which Web Forms developers will find very intuitive. I want to thank the developers on the Superexpert.com team for their hard work on this release.

  Read the article

• Manage SQL Server Connectivity through Windows Azure Virtual Machines Remote PowerShell

  - by SQLOS Team

  Manage SQL Server Connectivity through Windows Azure Virtual Machines Remote PowerShell Blog This blog post comes from Khalid Mouss, Senior Program Manager in Microsoft SQL Server. Overview The goal of this blog is to demonstrate how we can automate through PowerShell connecting multiple SQL Server deployments in Windows Azure Virtual Machines. We would configure TCP port that we would open (and close) though Windows firewall from a remote PowerShell session to the Virtual Machine (VM). This will demonstrate how to take the advantage of the remote PowerShell support in Windows Azure Virtual Machines to automate the steps required to connect SQL Server in the same cloud service and in different cloud services.  Scenario 1: VMs connected through the same Cloud Service 2 Virtual machines configured in the same cloud service. Both VMs running different SQL Server instances on them. Both VMs configured with remote PowerShell turned on to be able to run PS and other commands directly into them remotely in order to re-configure them to allow incoming SQL connections from a remote VM or on premise machine(s). Note: RDP (Remote Desktop Protocol) is kept configured in both VMs by default to be able to remote connect to them and check the connections to SQL instances for demo purposes only; but not actually required. Step 1 – Provision VMs and Configure Ports   Provision VM1; named DemoVM1 as follows (see examples screenshots below if using the portal):   Provision VM2 (DemoVM2) with PowerShell Remoting enabled and connected to DemoVM1 above (see examples screenshots below if using the portal): After provisioning of the 2 VMs above, here is the default port configurations for example: Step2 – Verify / Confirm the TCP port used by the database Engine By the default, the port will be configured to be 1433 – this can be changed to a different port number if desired.   1. RDP to each of the VMs created below – this will also ensure the VMs complete SysPrep(ing) and complete configuration 2. Go to SQL Server Configuration Manager -> SQL Server Network Configuration -> Protocols for <SQL instance> -> TCP/IP - > IP Addresses   3. Confirm the port number used by SQL Server Engine; in this case 1433 4. Update from Windows Authentication to Mixed mode   5.       Restart SQL Server service for the change to take effect 6.       Repeat steps 3., 4., and 5. For the second VM: DemoVM2 Step 3 – Remote Powershell to DemoVM1 Enter-PSSession -ComputerName condemo.cloudapp.net -Port 61503 -Credential <username> -UseSSL -SessionOption (New-PSSessionOption -SkipCACheck -SkipCNCheck) Your will then be prompted to enter the password. Step 4 – Open 1433 port in the Windows firewall netsh advfirewall firewall add rule name="DemoVM1Port" dir=in localport=1433 protocol=TCP action=allow Output: netsh advfirewall firewall show rule name=DemoVM1Port Rule Name:                            DemoVM1Port ---------------------------------------------------------------------- Enabled:                              Yes Direction:                            In Profiles:                             Domain,Private,Public Grouping:                             LocalIP:                              Any RemoteIP:                             Any Protocol:                             TCP LocalPort:                            1433 RemotePort:                           Any Edge traversal:                       No Action:                               Allow Ok. Step 5 – Now connect from DemoVM2 to DB instance in DemoVM1 Step 6 – Close port 1433 in the Windows firewall netsh advfirewall firewall delete rule name=DemoVM1Port Output: Deleted 1 rule(s). Ok. netsh advfirewall firewall show  rule name=DemoVM1Port No rules match the specified criteria.   Step 7 – Try to connect from DemoVM2 to DB Instance in DemoVM1  Because port 1433 has been closed (in step 6) in the Windows Firewall in VM1 machine, we can longer connect from VM3 remotely to VM1. Scenario 2: VMs provisioned in different Cloud Services 2 Virtual machines configured in different cloud services. Both VMs running different SQL Server instances on them. Both VMs configured with remote PowerShell turned on to be able to run PS and other commands directly into them remotely in order to re-configure them to allow incoming SQL connections from a remote VM or on on-premise machine(s). Note: RDP (Remote Desktop Protocol) is kept configured in both VMs by default to be able to remote connect to them and check the connections to SQL instances for demo purposes only; but not actually needed. Step 1 – Provision new VM3 Provision VM3; named DemoVM3 as follows (see examples screenshots below if using the portal): After provisioning is complete, here is the default port configurations: Step 2 – Add public port to VM1 connect to from VM3’s DB instance Since VM3 and VM1 are not connected in the same cloud service, we will need to specify the full DNS address while connecting between the machines which includes the public port. We shall add a public port 57000 in this case that is linked to private port 1433 which will be used later to connect to the DB instance. Step 3 – Remote Powershell to DemoVM1 Enter-PSSession -ComputerName condemo.cloudapp.net -Port 61503 -Credential <UserName> -UseSSL -SessionOption (New-PSSessionOption -SkipCACheck -SkipCNCheck) You will then be prompted to enter the password.   Step 4 – Open 1433 port in the Windows firewall netsh advfirewall firewall add rule name="DemoVM1Port" dir=in localport=1433 protocol=TCP action=allow Output: Ok. netsh advfirewall firewall show rule name=DemoVM1Port Rule Name:                            DemoVM1Port ---------------------------------------------------------------------- Enabled:                              Yes Direction:                            In Profiles:                             Domain,Private,Public Grouping:                             LocalIP:                              Any RemoteIP:                             Any Protocol:                             TCP LocalPort:                            1433 RemotePort:                           Any Edge traversal:                       No Action:                               Allow Ok.   Step 5 – Now connect from DemoVM3 to DB instance in DemoVM1 RDP into VM3, launch SSM and Connect to VM1’s DB instance as follows. You must specify the full server name using the DNS address and public port number configured above. Step 6 – Close port 1433 in the Windows firewall netsh advfirewall firewall delete rule name=DemoVM1Port   Output: Deleted 1 rule(s). Ok. netsh advfirewall firewall show  rule name=DemoVM1Port No rules match the specified criteria.  Step 7 – Try to connect from DemoVM2 to DB Instance in DemoVM1  Because port 1433 has been closed (in step 6) in the Windows Firewall in VM1 machine, we can no longer connect from VM3 remotely to VM1. Conclusion Through the new support for remote PowerShell in Windows Azure Virtual Machines, one can script and automate many Virtual Machine and SQL management tasks. In this blog, we have demonstrated, how to start a remote PowerShell session, re-configure Virtual Machine firewall to allow (or disallow) SQL Server connections. References SQL Server in Windows Azure Virtual Machines   Originally posted at http://blogs.msdn.com/b/sqlosteam/

  Read the article

• Accessing SharePoint 2010 Data with REST/OData on Windows Phone 7

  - by Jan Tielens

  Consuming SharePoint 2010 data in Windows Phone 7 applications using the CTP version of the developer tools is quite a challenge. The issue is that the SharePoint 2010 data is not anonymously available; users need to authenticate to be able to access the data. When I first tried to access SharePoint 2010 data from my first Hello-World-type Windows Phone 7 application I thought “Hey, this should be easy!” because Windows Phone 7 development based on Silverlight and SharePoint 2010 has a Client Object Model for Silverlight. Unfortunately you can’t use the Client Object Model of SharePoint 2010 on the Windows Phone platform; there’s a reference to an assembly that’s not available (System.Windows.Browser). My second thought was “OK, no problem!” because SharePoint 2010 also exposes a REST/OData API to access SharePoint data. Using the REST API in SharePoint 2010 is as easy as making a web request for a URL (in which you specify the data you’d like to retrieve), e.g. http://yoursiteurl/_vti_bin/listdata.svc/Announcements. This is very easy to accomplish in a Silverlight application that’s running in the context of a page in a SharePoint site, because the credentials of the currently logged on user are automatically picked up and passed to the WCF service. But a Windows Phone application is of course running outside of the SharePoint site’s page, so the application should build credentials that have to be passed to SharePoint’s WCF service. This turns out to be a small challenge in Silverlight 3, the WebClient doesn’t support authentication; there is a Credentials property but when you set it and make the request you get a NotImplementedException exception. Probably this issued will be solved in the very near future, since Silverlight 4 does support authentication, and there’s already a WCF Data Services download that uses this new platform feature of Silverlight 4. So when Windows Phone platform switches to Silverlight 4, you can just use the WebClient to get the data. Even more, if the OData Client Library for Windows Phone 7 gets updated after that, things should get even easier! By the way: the things I’m writing in this paragraph are just assumptions that I make which make a lot of sense IMHO, I don’t have any info all of this will happen, but I really hope so. So are SharePoint developers out of the Windows Phone development game until they get this fixed? Well luckily not, when the HttpWebRequest class is being used instead, you can pass credentials! Using the HttpWebRequest class is slightly more complex than using the WebClient class, but the end result is that you have access to your precious SharePoint 2010 data. The following code snippet is getting all the announcements of an Annoucements list in a SharePoint site: HttpWebRequest webReq =     (HttpWebRequest)HttpWebRequest.Create("http://yoursite/_vti_bin/listdata.svc/Announcements");webReq.Credentials = new NetworkCredential("username", "password"); webReq.BeginGetResponse(    (result) => {        HttpWebRequest asyncReq = (HttpWebRequest)result.AsyncState;         XDocument xdoc = XDocument.Load(            ((HttpWebResponse)asyncReq.EndGetResponse(result)).GetResponseStream());         XNamespace ns = "http://www.w3.org/2005/Atom";        var items = from item in xdoc.Root.Elements(ns + "entry")                    select new { Title = item.Element(ns + "title").Value };         this.Dispatcher.BeginInvoke(() =>        {            foreach (var item in items)                MessageBox.Show(item.Title);        });    }, webReq); When you try this in a Windows Phone 7 application, make sure you add a reference to the System.Xml.Linq assembly, because the code uses Linq to XML to parse the resulting Atom feed, so the Title of every announcement is being displayed in a MessageBox. Check out my previous post if you’d like to see a more polished sample Windows Phone 7 application that displays SharePoint 2010 data.When you plan to use this technique, it’s of course a good idea to encapsulate the code doing the request, so it becomes really easy to get the data that you need. In the following code snippet you can find the GetAtomFeed method that gets the contents of any Atom feed, even if you need to authenticate to get access to the feed. delegate void GetAtomFeedCallback(Stream responseStream); public MainPage(){    InitializeComponent();     SupportedOrientations = SupportedPageOrientation.Portrait |         SupportedPageOrientation.Landscape;     string url = "http://yoursite/_vti_bin/listdata.svc/Announcements";    string username = "username";    string password = "password";    string domain = "";     GetAtomFeed(url, username, password, domain, (s) =>    {        XNamespace ns = "http://www.w3.org/2005/Atom";        XDocument xdoc = XDocument.Load(s);         var items = from item in xdoc.Root.Elements(ns + "entry")                    select new { Title = item.Element(ns + "title").Value };         this.Dispatcher.BeginInvoke(() =>        {            foreach (var item in items)            {                MessageBox.Show(item.Title);            }        });    });} private static void GetAtomFeed(string url, string username,     string password, string domain, GetAtomFeedCallback cb){    HttpWebRequest webReq = (HttpWebRequest)HttpWebRequest.Create(url);    webReq.Credentials = new NetworkCredential(username, password, domain);     webReq.BeginGetResponse(        (result) =>        {            HttpWebRequest asyncReq = (HttpWebRequest)result.AsyncState;            HttpWebResponse resp = (HttpWebResponse)asyncReq.EndGetResponse(result);            cb(resp.GetResponseStream());        }, webReq);}

  Read the article

• XBRL US Conference Highlights

  - by john.orourke(at)oracle.com

  Back in early November I had an opportunity to attend the XBRL US National Conference in Philadelphia.  At the event, XBRL US announced that Oracle had joined the initiative, so I had a chance to participate in a press conference and attend a number of sessions.  Oracle joined XBRL US so we can stay ahead of the standard and leverage it in our products, and to help drive awareness with customers and improve adoption of XBRL. There were roughly 250 attendees at the event, about half of which were vendors and consultants and the rest financial reporting staff from corporate filers.  Event sponsors included Ernst & Young, SWIFT and Fujitsu.  There were also a number of XBRL technology and service providers exhibiting at the conference.  On Monday Nov. 8th, the XBRL US Steering Committee meetings and Annual Members meeting and reception were held.  At the Annual Members meeting the big news was that current XBRL US President, Mark Bolgiano, is moving to a new position at Howard Hughes Medical Center.  Campbell Pryde, who had led the Taxonomy Development for XBRL US, is taking over as XBRL US President. Other items that were highlighted at the members meeting included: The US GAAP XBRL taxonomy is being used by over 1500 SEC filers and has now been handed over to the FASB to maintain and enhance 16 filer training events were held in 2010 XBRL Global Magazine was launched Corporate Actions proposal was submitted to the SEC with SWIFT in May XBRL Labs for iPhone, XBRL US Consistency Suite launched ISO 2022 Corporate Actions Alignment with XBRL achieved The XBRL Credit Rating taxonomy was accepted Tuesday Nov. 9th included Keynotes, General Sessions, Innovation Workshop for Governments and Securities Professionals, and an Opening Reception.  General sessions included: Lessons Learned from the SEC's rollout of XBRL.  More than 18,000 errors were identified in reviews of filings between June 2009 and September 2010.  Most of these related to negative values being used where they shouldn't have.  Also, the SEC feels there are too many taxonomy extensions being created - mostly in the Cash Flow Statements.  They emphasize using existing elements in the US GAAP taxonomy and advise filers not to  create extensions to improve the visual formatting of XBRL filings. Investors and XBRL - Setting the Standard for Data Quality.  In this panel discussion, the key learning was that CFA's, academics and the financial community are not using XBRL as expected.  The issues raised include the  accuracy and completeness of filings, number of taxonomy extensions, and limited number of tools available to help analyze XBRL data.  Another big issue that was raised is the lack of historic results in XBRL - most analysts need 10 quarters of historic data.  On the positive side, XBRL has the potential to eliminate re-keying of data and errors here and can improve analytic capabilities for financial analysts once more historic data is available and more companies are providing detailed tagging of their filings. A US Roadmap for XBRL Financial Reporting.  This was a panel discussion featuring Jeff Neumann(SEC), Campbell Pryde(XBRL US), and Louis Matherne(FASB).  Key points included the fact that XBRL is currently used by 1500 companies, with 8000 more companies coming in 2011.  XBRL for Mutual Fund Reporting will start in 2011 for 8000 funds, and a Credit Rating Taxonomy has now been submitted for review.  The XBRL tagging/filing process is improving each quarter - more education is helping here.  The FASB is looking at extensions to date, and potential additions to US GAAP taxonomy, while the SEC is evaluating filings for accuracy, consistency in tagging, and tools for analyzing data.  The big news is that the FASB 2011 US GAAP Taxonomy has been completed and reviewed by SEC.  The 2011 US GAAP Taxonomy supports new FASB accounting standards issued since 2009, has new taxonomy elements for certain industries (i.e airlines) and the elimination of 500 concepts.  (meaning they can't be used going forward but are still supported for historical comparison)  The 2011 US GAAP Taxonomy will be available for usage with Q2 2011 SEC filings.  More information about this can be found on the FASB web site.  http://www.fasb.org/home Accounting Firms and XBRL.  This session covered the Role of Audit Firms, which includes awareness and education, validation of XBRL filings, and in-house transition planning.  The main advice provided was that organizations should document XBRL mapping process, perform peer comparisons, and risk assessments on a regular basis. Wednesday Nov. 10th included more Keynotes, General Sessions on Corporate Actions, and XBRL Essentials Workshop Training for corporate filers.  The XBRL Essentials Training included: Getting Started Once you Have the Basics Detailed Footnote Tagging and Handling Tables Quality Control and Trust in the XBRL Process Bringing XBRL In-House:  What are the Options, What should you consider? The US GAAP Financial Reporting Taxonomy - Overview of the 2011 release The XBRL Essentials Training was well-attended with about 80 people.  This included a good overview of the SEC's XBRL mandate, limited liability issue, tagging levels, recommended planning process, internal vs. outsourced approach, and how to manage service providers.  I learned a lot from the session on detailed tagging.  This is the requirement that kicks in during a company's second year of XBRL filing with the SEC and applies to financial statements, footnotes and disclosures (it does not apply to MD&A, executive communications and other information).  The review of the Linkbase model, or dimensional table structure, was very interesting and can be complex to understand.  The key takeaway here is that using dimensional tables in XBRL filings can help limit the number of taxonomy extensions that are required.  The slides from this session are posted on the XBRL US web site. (http://xbrl.us/events/Pages/archive.aspx) For me, the main summary points and takeaways from the XBRL US conference are: XBRL for financial reporting has turned the corner and gone mainstream - with 1500 companies currently using it and 8000 more coming in 2011 The expected value is not being achieved by filers or consumers of XBRL data - this will improve when more companies are filing in XBRL, more history is available, and more software tools are available for analysis (hmm, sounds like an opportunity for Oracle) XBRL is becoming the global standard for all business communications beyond just the financials - i.e. adoption for mutual funds, corporate actions and others planned for the future If you would like to learn more about XBRL and the various training programs, services and software tools that are available check out the XBRL US web site and even better - become a member.  Here's a link:  http://xbrl.us/Pages/default.aspx

  Read the article

• CodePlex Daily Summary for Monday, June 07, 2010

  CodePlex Daily Summary for Monday, June 07, 2010New ProjectsAgile Personal Development Methodology: 本项目并不是软件开发项目，它是一个关注个人能力发展的项目，希望通过大家的积极参与和实践，在价值观、原则和最佳实践的基础上不断丰富和完善这些内容。我将主要从生活、工作和个人三个主要方面来指导个人如何快速地提高自己的能力。在工作方面，首先关注的是IT技术人员。 希望本方法论的不断完善，能够对不同阶...Altairis Mail Toolkit: Altairis Mail Toolkit is a component for .NET developers making easy to send templated and localized e-mail messages. Uses standard resource mechan...AmazonPriceTicker: AmazonPriceTicker ist ein kleines ASP.NET-Projekt für unser Studium.CC.Hearts Screen Saver: A complete screensaver that draws pretty hearts. Supports all standard screensaver functionality (preview window, options, multi-monitor). Written...Controle Financeiro com DDD: Projeto para fins de estudo das tencologias: - DDD - TDD - Asp Net MVCDebugWriterTextBox: This is modified TextBox which can catch up Debug.Write() and display log. Also it can write log data to file - all you need is to set up file name!DEIConsultingDev: DEI Consulting DEVEasy Augmented Reality Suite for Silverlight: Easy Augmented Reality Suite for SilverlightEvent Broker: Simple event broker with an hierarchical implementation.fleet It: A WPF Client for Team Space. Developed using WPF and C#. Various URL Shortening services integrated.Gest-Bus: Gest-BusHNV Project: Projects created by Hoàng, Ngọc, VũHotel Management System: Hotel Management System : concerned in making a complete website for a hotel every thing in hotel in just one web application : Finance , managemen...ISEN découverte majeure application mobile: ISEN découverte majeure application mobile contrôle d'un pc par un téléphone portable avec plateforme windows 7 LiveSequence: Based in the sequence diagramming control of Nauman Leghari.NHash: This is a simple project that integrates with Explorer and Computes MD5 and SHA1.NHibernate Sidekick Library: NHibernate Sidekick is a library intended to assist in the development of multi-tiered applications using the NHibernate ORM framework.ScrewTurn ASP.NET Proxy Membership Provider: Plugin for the ScrewTurn Wiki System to use Standard ASP.NET Membership and Role providers.Silverlight SNS: We are going to develop a SNS web application based on Silver lightSilverPoiMap: SilverPoiMap provides interactive searching and management of Points of Interest. It is a Facebook client application which allow you to connect to...Simple Resource Localization Editor: Simple editor that simplifies localization and synchronization of .NET resource files (.resx).SimpleBlog.NET MVC: A very simple blog engine developed in ASP.NET 3.5 MVC2 and C#.Siverlight Project: Hope that everybody continue to develop it.SpaceConquest: Incorporated standard design patterns to build a peer to peer game in Java. The game rules were similar in complexity to games like Civilization an...Yasts: Yasts - Yet Another Space Trading Sim - This is a learning environment project.New ReleasesAgile Personal Development Methodology: 敏捷个人－认识自我，管理自我.pdf: 去年我在blog上写了个人管理系列的一些blog，其中一些文章深受大家的喜欢。想到写这个系列是源于在实施敏捷Scrum方法时，对方法实施是否对人的水平需要高要求的一些思考。自组织团队是建立在敏捷个人之上的，没有个人就没有团队，实施Scrum对人要求不高，但想实施得好，那么对人的要求肯定不低。 ...Altairis Mail Toolkit: 1.0.0 RTM: Initial releaseAndrew's XNA Helpers: Andrew's Xna Helpers V1.1: Currently only supports X86 projects since portions of the code have to be reworked to work with the xbox. I do plan to code it for the 360 though....C#Mail: Higuchi.Mail.dll (2010.6.6 ver): Higuchi.Mail.dll (2010.4.30 ver)Community Forums NNTP bridge: Community Forums NNTP Bridge V31: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...Html Agility Pack: Experimental Xpath Updates: In efforts to update make Html Agility Packs Xpath support to be closer to the System.Xml.Xpath implementation I have updated HAP to have all nodes...imdb movie downloader: myImdb 0.9.2: myImdb 0.9.2 Fully changed...and added some more features.. working with XML movie list... Used Backgroundworker more clever results and guess m...InfoService: InfoService v1.6 - MPE1 or RAR Package: InfoService Release v1.6.0.136 Please read Plugin installation for installation instructions.ISEN découverte majeure application mobile: appli traitement d'image: but : capturer, redimensionner l'image de l'écran d'un pc.Jeremi Stadler: Clipboard Manager: Version 1.0.5.14 It's finally here! I have been working on this one the whole night but it's worth it ;) The program catches clipboard changes an...mesoBoard: mesoBoard 0.9 - Beta: mesoBoard version 0.9 beta Released under the New BSD License. http://mesoboard.codeplex.com/license http://mesoboard.comMiniTwitter: 1.13: MiniTwitter 1.13 変更内容 修正 ダイレクトメッセージの取得に失敗するバグを修正 タイムラインを編集すると落ちるバグを修正 リストのインポートで最初の 20 人しか取得できない問題を修正 追加 URL マウスオーバーでの画像のプレビュー機能を実装MiniTwitter: 1.13.1: MiniTwitter 1.13.1 更新内容 修正 タイムライン追加、編集ダイアログでキャンセルを選ぶと落ちるバグを修正MSTS Editors & Tools: Simis Editor v0.4: Simis Editor v0.4 Open and Save dialogs support full filename filters from BNFs (e.g. "tsection.dat"). Added statusbar and menu help text. Adde...NHibernate Sidekick Library: 0.6.0: v0.6.0 - Initial Release TODONLog - Advanced .NET Logging: Nightly Build 2010.06.06.001: Changes since the last build:2010-06-05 21:50:21 Jarek Kowalski fixed doc for ${document-uri} 2010-06-05 20:21:53 Jarek Kowalski removed Layout re...NQ - Component-oriented Framework: NQ Core 0.90: Main changes in 0.90 release: Introduction of an additional built-in component loader to load component and service information from XML files ins...PhluffyFotos: v4 Windows Azure: This release has been updated to Visual Studio 2010 as well as the latest StorageClient library. Make sure you run the Provision.cmd in order to b...RIA Services Essentials: Book Club Application (June 6, 2010): The initial release of the BookClub application based on the MIX presentation with a few changes: 1. Some bug fixes 2. Added the ability to Like a ...Samurai.Workflow: 1.1 Stable Release: Removed reference to WPF assemblies so non-WPF applications can use the workflow. For WPF apps, the workflow will use reflection to seek out UI thr...SilverPoiMap: SilverPoiMap Beta: Beta VersionSimple Resource Localization Editor: Release 1: First release.Siverlight Project: Auto Arrange Panel Project: Auto Arrange Panel ProjectSmart Voice: Smart Voice 0.2: Changelog: Corrected a few bugsSmart Voice: Smart Voice 0.2.1: Changelog: Fixed a major bug that was slowing the application Added opt in for usage data In order to contribute with user data, please change t...Spider Compiler: Release 0.1: Contains the setup for the spider compiler. This release includes the changeset #66980.Spider Compiler: Release 0.2: This release includes the changeset #67003.The Lounge Repository: Lounge Repo Binary Release: All in one binary download of the Lounge Repository. Improvements: -More tolerant towards schema changes -Bug fixed regarding array normalization ...UrzaGatherer: UrzaGatherer v2.0.1: This release integrate the support of the Full Database Backup.Web/Cloud Applications Development Framework | Visual WebGui: 6.4 beta 3: This is the last beta version before the official release of Visual WebGui, including support for Visual Studio 2010 and it is fully featured with ...WinGet: Alpha 2: This is the second release of WinGet (0.5.0.2). Is is alpha quality not suitable for use in a production environment and it has bugs (see Known Iss...WoW Character Viewer: WoW Viewer: Newly redesigned layout of the original WoW Character Viewer. Faster access, cleaner layout.Most Popular ProjectsCommunity Forums NNTP bridgeASP.NET MVC Time PlannerMoonyDesk (windows desktop widgets)NeatUploadOutSyncFileupload AJAXViperWorks IgnitionAgUnit - Silverlight unit testing with ReSharperSQL Nexus ToolSmith Async .NET Memcached ClientMost Active ProjectsCommunity Forums NNTP bridgepatterns & practices – Enterprise LibraryRawrGMap.NET - Great Maps for Windows Forms & PresentationStyleCopN2 CMSsmark C# LibraryFarseer Physics EngineIonics Isapi Rewrite FilterNB_Store - Free DotNetNuke Ecommerce Catalog Module

  Read the article

• Right-Time Retail Part 3

  - by David Dorf

  This is part three of the three-part series.  Read Part 1 and Part 2 first. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Right-Time Marketing Real-time isn’t just about executing faster; it extends to interactions with customers as well. As an industry, we’ve spent many years analyzing all the data that’s been collected. Yes, that data has been invaluable in helping us make better decisions like where to open new stores, how to assort those stores, and how to price our products. But the recent advances in technology are now making it possible to analyze and deliver that data very quickly… fast enough to impact a potential sale in near real-time. Let me give you two examples. Salesmen in car dealerships get pretty good at sizing people up. When a potential customer walks in the door, it doesn’t take long for the salesman to figure out the revenue at stake. Is this person a real buyer, or just looking for a fun test drive? Will this person buy today or three months from now? Will this person opt for the expensive packages, or go bare bones? While the salesman certainly asks some leading questions, much of information is discerned through body language. But body language doesn’t translate very well over the web. Eloqua, which was acquired by Oracle earlier this year, reads internet body language. By tracking the behavior of the people visiting your web site, Eloqua categorizes visitors based on their propensity to buy. While Eloqua’s roots have been in B2B, we’ve been looking at leveraging the technology with ATG to target B2C. Knowing what sites were previously visited, how often the customer has been to your site recently, and how long they’ve spent searching can help understand where the customer is in their purchase journey. And knowing that bit of information may be enough to help close the deal with a real-time offer, follow-up email, or online customer service pop-up. This isn’t so different from the days gone by when the clerk behind the counter of the corner store noticed you were lingering in a particular aisle, so he walked over to help you compare two products and close the sale. You appreciated the personalized service, and he knew the value of the long-term relationship. Move that same concept into the digital world and you have Oracle’s CX Suite, a cloud-based offering of end-to-end customer experience tools, assembled primarily from acquisitions. Those tools are Oracle Marketing (Eloqua), Oracle Commerce (ATG, Endeca), Oracle Sales (Oracle CRM On Demand), Oracle Service (RightNow), Oracle Social (Collective Intellect, Vitrue, Involver), and Oracle Content (Fatwire). We are providing the glue that binds the CIO and CMO together to unleash synergies that drive the top-line higher, and by virtue of the cloud-approach, keep costs at bay. My second example of real-time marketing takes place in the store but leverages the concepts of Web marketing. In 1962 the decline of personalized service in retail began. Anyone know the significance of that year? That’s when Target, K-Mart, and Walmart each opened their first stores, and over the succeeding years the industry chose scale over personal service. No longer were you known as “Jane with the snotty kid so make sure we check her out fast,” but you suddenly became “time-starved female age 20-30 with kids.” I’m not saying that was a bad thing – it was the right thing for our industry at the time, and it enabled a huge amount of growth, cheaper prices, and more variety of products. But scale alone is no longer good enough. Today’s sophisticated consumer demands scale, experience, and personal attention. To some extent we’ve delivered that on websites via the magic of cookies, your willingness to log in, and sophisticated data analytics. What store manager wouldn’t love a report detailing all the visitors to his store, where they came from, and which products that examined? People trackers are getting more sophisticated, incorporating infrared, video analytics, and even face recognition. (Next time you walk in front on a mannequin, don’t be surprised if it’s looking back.) But the ultimate marketing conduit is the mobile phone. Since each mobile phone emits a unique number on WiFi networks, it becomes the cookie of the physical world. Assuming congress keeps privacy safeguards reasonable, we’ll have a win-win situation for both retailers and consumers. Retailers get to know more about the consumer’s purchase journey, and consumers get higher levels of service with the retailer. When I call my bank, a couple things happen before the call is connected. A reverse look-up on my phone number identifies me so my accounts can be retrieved from Siebel CRM. Then the system anticipates why I’m calling based on recent transactions. In this example, it sees that I was just charged a foreign currency fee, so it assumes that’s the reason I’m calling. It puts all the relevant information on the customer service rep’s screen as it connects the call. When I complain about the fee, the rep immediately sees I’m a great customer and I travel lots, so she suggests switching me to their traveler’s card that doesn’t have foreign transaction fees. That technology is powered by a product called Oracle Real-Time Decisions, a rules engine built to execute very quickly, basically in the time it takes the phone to ring once. So let’s combine the power of that product with our new-found mobile cookie and provide contextual customer interactions in real-time. Our first opportunity comes when a customer crosses a pre-defined geo-fence, typically a boundary around the store. Context is the key to our interaction: that’s the customer (known or anonymous), the time of day and day of week, and location. Thomas near the downtown store on a Wednesday at noon means he’s heading to lunch. If he were near the mall location on a Saturday morning, that’s a completely different context. But on his way to lunch, we’ll let Thomas know that we’ve got a new shipment of ASICS running shoes on display with a simple text message. We used the context to look-up Thomas’ past purchases and understood he was an avid runner. We used the fact that this was lunchtime to select the type of message, in this case an informational message instead of an offer. Thomas enters the store, phone in hand, and walks to the shoe department. He scans one of the new ASICS shoes using the convenient QR Codes we provided on the shelf-tags, but then he starts scanning low-end Nikes. Each scan is another opportunity to both learn from Thomas and potentially interact via another message. Since he historically buys low-end Nikes and keeps scanning them, he’s likely falling back into his old ways. Our marketing rules are currently set to move loyal customer to higher margin products. We could have set the dials to increase visit frequency, move overstocked items, increase basket size, or many other settings, but today we are trying to move Thomas to higher-margin products. We send Thomas another text message, this time it’s a personalized offer for 10% off ASICS good for 24 hours. Offering him a discount on Nikes would be throwing margin away since he buys those anyway. We are using our marketing dollars to change behavior that increases the long-term value of Thomas. He decides to buy the ASICS and scans the discount code on his phone at checkout. Checkout is yet another opportunity to interact with Thomas, so the transaction is sent back to Oracle RTD for evaluation. Since Thomas didn’t buy anything with the shoes, we’ll print a bounce-back coupon on the receipt offering 30% off ASICS socks if he returns within seven days. We have successfully started moving Thomas from low-margin to high-margin products. In both of these marketing scenarios, we are able to leverage data in near real-time to decide how best to interact with the customer and lead to an increase in the lifetime value of the customer. The key here is acting at the moment the customer shows interest using the context of the situation. We aren’t pushing random products at haphazard times. We are tailoring the marketing to be very specific to this customer, and it’s the technology that allows this to happen in near real-time. Conclusion As we enable more right-time integrations and interactions, retailers will begin to offer increased service to their customers. Localized and personalized service at scale will drive loyalty and lead to meaningful revenue growth for the retailers that execute well. Our industry needs to support Commerce Anywhere…and commerce anytime as well.

  Read the article

• Integration Patterns with Azure Service Bus Relay, Part 1: Exposing the on-premise service

  - by Elton Stoneman

  We're in the process of delivering an enabling project to expose on-premise WCF services securely to Internet consumers. The Azure Service Bus Relay is doing the clever stuff, we register our on-premise service with Azure, consumers call into our .servicebus.windows.net namespace, and their requests are relayed and serviced on-premise. In theory it's all wonderfully simple; by using the relay we get lots of protocol options, free HTTPS and load balancing, and by integrating to ACS we get plenty of security options. Part of our delivery is a suite of sample consumers for the service - .NET, jQuery, PHP - and this set of posts will cover setting up the service and the consumers. Part 1: Exposing the on-premise service In theory, this is ultra-straightforward. In practice, and on a dev laptop it is - but in a corporate network with firewalls and proxies, it isn't, so we'll walkthrough some of the pitfalls. Note that I'm using the "old" Azure portal which will soon be out of date, but the new shiny portal should have the same steps available and be easier to use. We start with a simple WCF service which takes a string as input, reverses the string and returns it. The Part 1 version of the code is on GitHub here: on GitHub here: IPASBR Part 1. Configuring Azure Service Bus Start by logging into the Azure portal and registering a Service Bus namespace which will be our endpoint in the cloud. Give it a globally unique name, set it up somewhere near you (if you’re in Europe, remember Europe (North) is Ireland, and Europe (West) is the Netherlands), and  enable ACS integration by ticking "Access Control" as a service: Authenticating and authorizing to ACS When we try to register our on-premise service as a listener for the Service Bus endpoint, we need to supply credentials, which means only trusted service providers can act as listeners. We can use the default "owner" credentials, but that has admin permissions so a dedicated service account is better (Neil Mackenzie has a good post On Not Using owner with the Azure AppFabric Service Bus with lots of permission details). Click on "Access Control Service" for the namespace, navigate to Service Identities and add a new one. Give the new account a sensible name and description: Let ACS generate a symmetric key for you (this will be the shared secret we use in the on-premise service to authenticate as a listener), but be sure to set the expiration date to something usable. The portal defaults to expiring new identities after 1 year - but when your year is up *your identity will expire without warning* and everything will stop working. In production, you'll need governance to manage identity expiration and a process to make sure you renew identities and roll new keys regularly. The new service identity needs to be authorized to listen on the service bus endpoint. This is done through claim mapping in ACS - we'll set up a rule that says if the nameidentifier in the input claims has the value serviceProvider, in the output we'll have an action claim with the value Listen. In the ACS portal you'll see that there is already a Relying Party Application set up for ServiceBus, which has a Default rule group. Edit the rule group and click Add to add this new rule: The values to use are: Issuer: Access Control Service Input claim type: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier Input claim value: serviceProvider Output claim type: net.windows.servicebus.action Output claim value: Listen When your service namespace and identity are set up, open the Part 1 solution and put your own namespace, service identity name and secret key into the file AzureConnectionDetails.xml in Solution Items, e.g: <azure namespace="sixeyed-ipasbr">    <!-- ACS credentials for the listening service (Part1):-->   <service identityName="serviceProvider"            symmetricKey="nuR2tHhlrTCqf4YwjT2RA2BZ/+xa23euaRJNLh1a/V4="/>  </azure> Build the solution, and the T4 template will generate the Web.config for the service project with your Azure details in the transportClientEndpointBehavior:           <behavior name="SharedSecret">             <transportClientEndpointBehavior credentialType="SharedSecret">               <clientCredentials>                 <sharedSecret issuerName="serviceProvider"                               issuerSecret="nuR2tHhlrTCqf4YwjT2RA2BZ/+xa23euaRJNLh1a/V4="/>               </clientCredentials>             </transportClientEndpointBehavior>           </behavior> , and your service namespace in the Azure endpoint:         <!-- Azure Service Bus endpoints -->          <endpoint address="sb://sixeyed-ipasbr.servicebus.windows.net/net"                   binding="netTcpRelayBinding"                   contract="Sixeyed.Ipasbr.Services.IFormatService"                   behaviorConfiguration="SharedSecret">         </endpoint> The sample project is hosted in IIS, but it won't register with Azure until the service is activated. Typically you'd install AppFabric 1.1 for Widnows Server and set the service to auto-start in IIS, but for dev just navigate to the local REST URL, which will activate the service and register it with Azure. Testing the service locally As well as an Azure endpoint, the service has a WebHttpBinding for local REST access:         <!-- local REST endpoint for internal use -->         <endpoint address="rest"                   binding="webHttpBinding"                   behaviorConfiguration="RESTBehavior"                   contract="Sixeyed.Ipasbr.Services.IFormatService" /> Build the service, then navigate to: http://localhost/Sixeyed.Ipasbr.Services/FormatService.svc/rest/reverse?string=abc123 - and you should see the reversed string response: If your network allows it, you'll get the expected response as before, but in the background your service will also be listening in the cloud. Good stuff! Who needs network security? Onto the next post for consuming the service with the netTcpRelayBinding.  Setting up network access to Azure But, if you get an error, it's because your network is secured and it's doing something to stop the relay working. The Service Bus relay bindings try to use direct TCP connections to Azure, so if ports 9350-9354 are available *outbound*, then the relay will run through them. If not, the binding steps down to standard HTTP, and issues a CONNECT across port 443 or 80 to set up a tunnel for the relay. If your network security guys are doing their job, the first option will be blocked by the firewall, and the second option will be blocked by the proxy, so you'll get this error: System.ServiceModel.CommunicationException: Unable to reach sixeyed-ipasbr.servicebus.windows.net via TCP (9351, 9352) or HTTP (80, 443) - and that will probably be the start of lots of discussions. Network guys don't really like giving servers special permissions for the web proxy, and they really don't like opening ports, so they'll need to be convinced about this. The resolution in our case was to put up a dedicated box in a DMZ, tinker with the firewall and the proxy until we got a relay connection working, then run some traffic which the the network guys monitored to do a security assessment afterwards. Along the way we hit a few more issues, diagnosed mainly with Fiddler and Wireshark: System.Net.ProtocolViolationException: Chunked encoding upload is not supported on the HTTP/1.0 protocol - this means the TCP ports are not available, so Azure tries to relay messaging traffic across HTTP. The service can access the endpoint, but the proxy is downgrading traffic to HTTP 1.0, which does not support tunneling, so Azure can’t make its connection. We were using the Squid proxy, version 2.6. The Squid project is incrementally adding HTTP 1.1 support, but there's no definitive list of what's supported in what version (here are some hints). System.ServiceModel.Security.SecurityNegotiationException: The X.509 certificate CN=servicebus.windows.net chain building failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. The evocation function was unable to check revocation because the revocation server was offline. - by this point we'd given up on the HTTP proxy and opened the TCP ports. We got this error when the relay binding does it's authentication hop to ACS. The messaging traffic is TCP, but the control traffic still goes over HTTP, and as part of the ACS authentication the process checks with a revocation server to see if Microsoft’s ACS cert is still valid, so the proxy still needs some clearance. The service account (the IIS app pool identity) needs access to: www.public-trust.com mscrl.microsoft.com We still got this error periodically with different accounts running the app pool. We fixed that by ensuring the machine-wide proxy settings are set up, so every account uses the correct proxy: netsh winhttp set proxy proxy-server="http://proxy.x.y.z" - and you might need to run this to clear out your credential cache: certutil -urlcache * delete If your network guys end up grudgingly opening ports, they can restrict connections to the IP address range for your chosen Azure datacentre, which might make them happier - see Windows Azure Datacenter IP Ranges. After all that you've hopefully got an on-premise service listening in the cloud, which you can consume from pretty much any technology.

  Read the article

• Thoughts on the Nomination Committee Campaign 2014

  - by Testas

  Congratulations to Erin, Andy and Allen on making the Nomination Committee for 2014. As Mark Broadbent (@retracement) stated in his tweet, there’s a great set of individuals for the Nom Com, and I could not agree more. I know Erin and Allen, and I know how much value they will bring to the process. I don’t know Andy as well, but I am sure he will do a great job and I hope I can meet him at PASS soon. The final candidate appointed by the PASS board is Rick Bolesta, who brings a wealth of experience to the process. I also want to take the opportunity to thank all who have voted. Not just for me, but for all the candidates during the election. Your contribution is greatly appreciated. Would I apply for the Nom Com again?  Yes I would. My first election experience has been a learning experience in itself. So I accept the result and look forward to applying next year. Moving on from this, I do want to express my opinion about the lack of international representation in the election process. One of the tweets that I saw after the result was from Adam Machanic (@AdamMachanic) who commented on the lack of international members on the Nom Com. If truth be told, I was disappointed – when the candidate list was released -- that for the second time in recent elections there was a lack of international candidates on the candidate list. It feels that only Brits and Americans partake in such elections. This is a real shame, and I can’t help thinking why this is the case. Hugo Kornelis (@Hugo_Kornelis) wrote a blog here to express his thoughts. He did raise some valid points. I don’t know why there is an absence of international candidates. I know that the team at PASS are looking to improve the situation, so I do not want to give the impression that PASS are doing nothing. For reference please see Bill Graziano’ s article here to see how PASS are addressing the situation. There is a clear direction to change the rules within PASS to give greater inclusion of international members. In addition to this, I wanted to explore a couple of potential approaches to address the situation. I am not saying that they are the right answer, but when I see challenges, I like to bring potential solutions to the table. 1.       Use the PASS mission statement to define a tactical objective that engages community leaders into the election process. If you are not familiar with the PASS mission statement, let me provide it here as laid out on the PASS website. “Empower data professionals who leverage Microsoft technologies to connect, share, and learn through networking, knowledge sharing, and peer-based learning” PASS fulfil this mission statement regularly. Whether you attend SQL Saturday, SQLRally, SQLPASS and BA conference itself. The biggest value of PASS is the ability to bring our profession together. And the 24 hour hop allows you to learn from the comfort of your own office/home. This mission should be extended to define a tactical objectives that bring greater networking and knowledge sharing between PASS Chapter leaders/Regional Mentors and PASS HQ. It should help educate the leaders about the opportunities of elections and how leaders can become involved. I know PASS engage with Chapter leaders on a regular basis to discuss community matters for the benefit of PASS members. How could this be achieved? Perhaps PASS could perform a quarterly virtual meeting that specifically looks at helping leaders become more involved with the election process 2.       Evolve the Global Growth Strategy into a Global Engagement Strategy. One of the remits of the PASS board over the last couple of years is the Global Growth strategy. This has been very successful as we have seen the massive growth of events across the world. For that, I congratulate the board for this success. Perhaps the time is now right to look at solidifying this success, through a Global Engagement Strategy that starts with the collaboration of Chapter Leaders, Regional Mentors and Evangelists in their respective Countries or Regions. The engagement strategy should look at increasing collaboration between community leaders for the benefit of their respective communities. It should also provide a channel for encouraging leaders to put themselves forward for the elections. How could this be achieved? In the UK, there has been a big growth in PASS Chapters and SQL Server Events that was approaching saturation point. The introduction of the Community Engagement Day -- channelled through the SQLBits conference -- has enabled Chapter Leaders to collaborate, connect and share with PASS, Sponsors and Microsoft. It also provides the ability for Chapter Leaders to speak directly to the PASS representatives from PASSHQ. This brings with it the ability for PASS community evangelists to communicate PASS objectives. It has also been the event where we have found out; and/or encouraged, Chapter Leaders to put themselves forward for elections. People like encouragement and validation when going for something like an election, and being able to discuss this with peers at a dedicated event provides a useful platform. PASS has the people in place already to facilitate such an event. Regional Mentors could potentially help organise such events on an annual basis, with PASSHQ providing support in providing a room/Lync access for the event to take place. It would be really good if a PASSHQ representative could attend in person as well.   3.       Restrict candidates to serve only a limited number of terms. A frequent comment I saw on social networking was that the elections can be seen by some as a popularity conference. Perhaps by limiting the number of terms that an individual can serve on either the Nom Com or the BOD, other candidates may be encouraged to be more actively involved within the PASS election process. I don’t think that the current byelaws deal with this particular suggestion. I also saw a couple of tweets that stated that more active community members did not apply for the Nom Com. I struggled to understand how the individuals of the tweets measured “more active”. It just also further solidified the subjective nature of elections. In the absence of how candidates are put forward for the elections. Then a restriction of terms enables the opportunity to be extended to others. How could this be achieved? Set a resolution that is put to a community vote as to the viability of such a solution. For example, the questions for the vote could be: Should individuals in the Nom Com and BoD be limited to a certain number of terms?  Yes/No. What is the maximum number of terms a candidate could serve?   It would be simple to execute such a vote, and the community will have an opportunity to have a say in an important aspect of the PASS organisation. And is the change is successful, then add it as a byelaw.   So there are some of my thoughts. I am not saying they are right or wrong. But I do hope that there is a concerted effort to encourage more candidates from other reaches of the Globe to become involved with future elections.   It would be good to hear your thoughts   Thanks   Chris

  Read the article

• Enum driving a Visual State change via the ViewModel

  - by Chris Skardon

  Exciting title eh? So, here’s the problem, I want to use my ViewModel to drive my Visual State, I’ve used the ‘DataStateBehavior’ before, but the trouble with it is that it only works for bool values, and the minute you jump to more than 2 Visual States, you’re kind of screwed. A quick search has shown up a couple of points of interest, first, the DataStateSwitchBehavior, which is part of the Expression Samples (on Codeplex), and also available via Pete Blois’ blog. The second interest is to use a DataTrigger with GoToStateAction (from the Silverlight forums). So, onwards… first let’s create a basic switch Visual State, so, a DataObj with one property: IsAce… public class DataObj : NotifyPropertyChanger { private bool _isAce; public bool IsAce { get { return _isAce; } set { _isAce = value; RaisePropertyChanged("IsAce"); } } } The ‘NotifyPropertyChanger’ is literally a base class with RaisePropertyChanged, implementing INotifyPropertyChanged. OK, so we then create a ViewModel: public class MainPageViewModel : NotifyPropertyChanger { private DataObj _dataObj; public MainPageViewModel() { DataObj = new DataObj {IsAce = true}; ChangeAcenessCommand = new RelayCommand(() => DataObj.IsAce = !DataObj.IsAce); } public ICommand ChangeAcenessCommand { get; private set; } public DataObj DataObj { get { return _dataObj; } set { _dataObj = value; RaisePropertyChanged("DataObj"); } } } Aaaand finally – hook it all up to the XAML, which is a very simple UI: A Rectangle, a TextBlock and a Button. The Button is hooked up to ChangeAcenessCommand, the TextBlock is bound to the ‘DataObj.IsAce’ property and the Rectangle has 2 visual states: IsAce and NotAce. To make the Rectangle change it’s visual state I’ve used a DataStateBehavior inside the Layout Root Grid: <i:Interaction.Behaviors> <ei:DataStateBehavior Binding="{Binding DataObj.IsAce}" Value="true" TrueState="IsAce" FalseState="NotAce"/> </i:Interaction.Behaviors> So now we have the button changing the ‘IsAce’ property and giving us the other visual state: Great! So – the next stage is to get that to work inside a DataTemplate… Which (thankfully) is easy money. All we do is add a ListBox to the View and an ObservableCollection to the ViewModel. Well – ok, a little bit more than that. Once we’ve got the ListBox with it’s ItemsSource property set, it’s time to add the DataTemplate itself. Again, this isn’t exactly taxing, and is purely going to be a Grid with a Textblock and a Rectangle (again, I’m nothing if not consistent). Though, to be a little jazzy I’ve swapped the rectangle to the other side (living the dream). So, all that’s left is to add some States to the template.. (Yes – you can do that), these can be the same names as the others, or indeed, something else, I have chosen to stick with the same names and take the extra confusion hit right on the nose. Once again, I add the DataStateBehavior to the root Grid element: <i:Interaction.Behaviors> <ei:DataStateBehavior Binding="{Binding IsAce}" Value="true" TrueState="IsAce" FalseState="NotAce"/> </i:Interaction.Behaviors> The key difference here is the ‘Binding’ attribute, where I’m now binding to the IsAce property directly, and boom! It’s all gravy!   So far, so good. We can use boolean values to change the visual states, and (crucially) it works in a DataTemplate, bingo! Now. Onwards to the Enum part of this (finally!). Obviously we can’t use the DataStateBehavior, it' only gives us true/false options. So, let’s give the GoToStateAction a go. Now, I warn you, things get a bit complex from here, instead of a bool with 2 values, I’m gonna max it out and bring in an Enum with 3 (count ‘em) 3 values: Red, Amber and Green (those of you with exceptionally sharp minds will be reminded of traffic lights). We’re gonna have a rectangle which also has 3 visual states – cunningly called ‘Red’, ‘Amber’ and ‘Green’. A new class called DataObj2: public class DataObj2 : NotifyPropertyChanger { private Status _statusValue; public DataObj2(Status status) { StatusValue = status; } public Status StatusValue { get { return _statusValue; } set { _statusValue = value; RaisePropertyChanged("StatusValue"); } } } Where ‘Status’ is my enum. Good times are here! Ok, so let’s get to the beefy stuff. So, we’ll start off in the same manner as the last time, we will have a single DataObj2 instance available to the Page and bind to that. Let’s add some Triggers (these are in the LayoutRoot again). <i:Interaction.Triggers> <ei:DataTrigger Binding="{Binding DataObject2.StatusValue}" Value="Amber"> <ei:GoToStateAction StateName="Amber" UseTransitions="False" /> </ei:DataTrigger> <ei:DataTrigger Binding="{Binding DataObject2.StatusValue}" Value="Green"> <ei:GoToStateAction StateName="Green" UseTransitions="False" /> </ei:DataTrigger> <ei:DataTrigger Binding="{Binding DataObject2.StatusValue}" Value="Red"> <ei:GoToStateAction StateName="Red" UseTransitions="False" /> </ei:DataTrigger> </i:Interaction.Triggers> So what we’re saying here is that when the DataObject2.StatusValue is equal to ‘Red’ then we’ll go to the ‘Red’ state. Same deal for Green and Amber (but you knew that already). Hook it all up and start teh project. Hmm. Just grey. Not what I wanted. Ok, let’s add a ‘ChangeStatusCommand’, hook that up to a button and give it a whirl: Right, so the DataTrigger isn’t picking up the data on load. On the plus side, changing the status is making the visual states change. So. We’ll cross the ‘Grey’ hurdle in a bit, what about doing the same in the DataTemplate? <Codey Codey/> Grey again, but if we press the button: (I should mention, pressing the button sets the StatusValue property on the DataObj2 being represented to the next colour). Right. Let’s look at this ‘Grey’ issue. First ‘fix’ (and I use the term ‘fix’ in a very loose way): The Dispatcher Fix This involves using the Dispatcher on the View to call something like ‘RefreshProperties’ on the ViewModel, which will in turn raise all the appropriate ‘PropertyChanged’ events on the data objects being represented. So, here goes, into turdcode-ville – population – me: First, add the ‘RefreshProperties’ method to the DataObj2: internal void RefreshProperties() { RaisePropertyChanged("StatusValue"); } (shudder) Now, add it to the hosting ViewModel: public void RefreshProperties() { DataObject2.RefreshProperties(); if (DataObjects != null && DataObjects.Count > 0) { foreach (DataObj2 dataObject in DataObjects) dataObject.RefreshProperties(); } } (double shudder) and now for the cream on the cake, adding the following line to the code behind of the View: Dispatcher.BeginInvoke(() => ((MoreVisualStatesViewModel)DataContext).RefreshProperties()); So, what does this *ahem* code give us: Awesome, it makes the single bound data object show the colour, but frankly ignores the DataTemplate items. This (by the way) is the same output you get from: Dispatcher.BeginInvoke(() => ((MoreVisualStatesViewModel)DataContext).ChangeStatusCommand.Execute(null)); So… Where does that leave me? What about adding a button to the Page to refresh the properties – maybe it’s a timer thing? Yes, that works. Right, what about using the Loaded event then eh? Loaded += (s, e) => ((MoreVisualStatesViewModel) DataContext).RefreshProperties(); Ahhh No. What about converting the DataTemplate into a UserControl? Anything is worth a shot.. Though – I still suspect I’m going to have to ‘RefreshProperties’ if I want the rectangles to update. Still. No. This DataTemplate DataTrigger binding is becoming a bit of a pain… I can’t add a ‘refresh’ button to the actual code base, it’s not exactly user friendly. I’m going to end this one now, and put some investigating into the use of the DataStateSwitchBehavior (all the ones I’ve found, well, all 2 of them are working in SL3, but not 4…)

  Read the article

• Recap: Oracle Fusion Middleware Strategies Driving Business Innovation

  - by Harish Gaur

  Hasan Rizvi, Executive Vice President of Oracle Fusion Middleware & Java took the stage on Tuesday to discuss how Oracle Fusion Middleware helps enable business innovation. Through a series of product demos and customer showcases, Hassan demonstrated how Oracle Fusion Middleware is a complete platform to harness the latest technological innovations (cloud, mobile, social and Fast Data) throughout the application lifecycle. Fig 1: Oracle Fusion Middleware is the foundation of business innovation This Session included 4 demonstrations to illustrate these strategies: 1. Build and deploy native mobile applications using Oracle ADF Mobile 2. Empower business user to model processes, design user interface and have rich mobile experience for process interaction using Oracle BPM Suite PS6. 3. Create collaborative user experience and integrate social sign-on using Oracle WebCenter Portal, Oracle WebCenter Content, Oracle Social Network & Oracle Identity Management 11g R2 4. Deploy and manage business applications on Oracle Exalogic Nike, LA Department of Water & Power and Nintendo joined Hasan on stage to share how their organizations are leveraging Oracle Fusion Middleware to enable business innovation. Managing Performance in the Wrld of Social and Mobile How do you provide predictable scalability and performance for an application that monitors active lifestyle of 8 million users on a daily basis? Nike’s answer is Oracle Coherence, a component of Oracle Fusion Middleware and Oracle Exadata. Fig 2: Oracle Coherence enabled data grid improves performance of Nike+ Digital Sports Platform Nicole Otto, Sr. Director of Consumer Digital Technology discussed the vision of the Nike+ platform, a platform which represents a shift for NIKE from a  "product"  to  a "product +" experience.  There are currently nearly 8 million users in the Nike+ system who are using digitally-enabled Nike+ devices.  Once data from the Nike+ device is transmitted to Nike+ application, users access the Nike+ website or via the Nike mobile applicatoin, seeing metrics around their daily active lifestyle and even engage in socially compelling experiences to compare, compete or collaborate their data with their friends. Nike expects the number of users to grow significantly this year which will drive an explosion of data and potential new experiences. To deal with this challenge, Nike envisioned building a shared platform that would drive a consumer-centric model for the company. Nike built this new platform using Oracle Coherence and Oracle Exadata. Using Coherence, Nike built a data grid tier as a distributed cache, thereby provide low-latency access to most recent and relevant data to consumers. Nicole discussed how Nike+ Digital Sports Platform is unique in the way that it utilizes the Coherence Grid.  Nike takes advantage of Coherence as a traditional cache using both cache-aside and cache-through patterns.  This new tier has enabled Nike to create a horizontally scalable distributed event-driven processing architecture. Current data grid volume is approximately 150,000 request per minute with about 40 million objects at any given time on the grid. Improving Customer Experience Across Multiple Channels Customer experience is on top of every CIO's mind. Customer Experience needs to be consistent and secure across multiple devices consumers may use.  This is the challenge Matt Lampe, CIO of Los Angeles Department of Water & Power (LADWP) was faced with. Despite being the largest utilities company in the country, LADWP had been relying on a 38 year old customer information system for serving its customers. Their prior system  had been unable to keep up with growing customer demands. Last year, LADWP embarked on a journey to improve customer experience for 1.6million LA DWP customers using Oracle WebCenter platform. Figure 3: Multi channel & Multi lingual LADWP.com built using Oracle WebCenter & Oracle Identity Management platform Matt shed light on his efforts to drive customer self-service across 3 dimensions – new website, new IVR platform and new bill payment service. LADWP has built a new portal to increase customer self-service while reducing the transactions via IVR. LADWP's website is powered Oracle WebCenter Portal and is accessible by desktop and mobile devices. By leveraging Oracle WebCenter, LADWP eliminated the need to build, format, and maintain individual mobile applications or websites for different devices. Their entire content is managed using Oracle WebCenter Content and secured using Oracle Identity Management. This new portal automated their paper based processes to web based workflows for customers. This includes automation of Self Service implemented through My Account -  like Bill Pay, Payment History, Bill History and Usage Analysis. LADWP's solution went live in April 2012. Matt indicated that LADWP's Self-Service Portal has greatly improved customer satisfaction.  In a JD Power Associates website satisfaction survey, results indicate rankings have climbed by 25+ points, marking a remarkable increase in user experience. Bolstering Performance and Simplifying Manageability of Business Applications Ingvar Petursson, Senior Vice Preisdent of IT at Nintendo America joined Hasan on-stage to discuss their choice of Exalogic. Nintendo had significant new requirements coming their way for business systems, both internal and external, in the years to come, especially with new products like the WiiU on the horizon this holiday season. Nintendo needed a platform that could give them performance, availability and ease of management as they deploy business systems. Ingvar selected Engineered Systems for two reasons: 1. High performance  2. Ease of management Figure 4: Nintendo relies on Oracle Exalogic to run ATG eCommerce, Oracle e-Business Suite and several business applications Nintendo made a decision to run their business applications (ATG eCommerce, E-Business Suite) and several Fusion Middleware components on the Exalogic platform. What impressed Ingvar was the "stress” testing results during evaluation. Oracle Exalogic could handle their 3-year load estimates for many functions, which was better than Nintendo expected without any hardware expansion. Faster Processing of Big Data Middleware plays an increasingly important role in Big Data. Last year, we announced at OpenWorld the introduction of Oracle Data Integrator for Hadoop and Oracle Loader for Hadoop which helps in the ability to move, transform, load data to and from Big Data Appliance to Exadata.  This year, we’ve added new capabilities to find, filter, and focus data using Oracle Event Processing. This product can natively integrate with Big Data Appliance or runs standalone. Hasan briefly discussed how NTT Docomo, largest mobile operator in Japan, leverages Oracle Event Processing & Oracle Coherence to process mobile data (from 13 million smartphone users) at a speed of 700K events per second before feeding it Hadoop for distributed processing of big data. Figure 5: Mobile traffic data processing at NTT Docomo with Oracle Event Processing & Oracle Coherence    

  Read the article

• Team Foundation Server 2012 Build Global List Problems

  - by Bob Hardister

  My experience with the upgrade and use of TFS 2012 has been very positive. I did come across a couple of issues recently that tripped things up for a while. ISSUE 1 The first issue is that 2012 prior to Update 1 published an invalid build list item value to the collection global list. In 2010, the build global list, list item value syntax is an underscore between the build definition and the build number. In the 2012 RTM this underscore was replaced with a backslash, which is invalid.  Specifically, an upload of the global list fails when the backslash is followed at some point by a period. The error when using the API is: <detail ExceptionMessage="TF26204: The account you entered is not recognized. Contact your Team Foundation Server administrator to add your account." BaseExceptionName="Microsoft.TeamFoundation.WorkItemTracking.Server.ValidationException"><details id="600019" http://schemas.microsoft.com/TeamFoundation/2005/06/WorkItemTracking/faultdetail/03"http://schemas.microsoft.com/TeamFoundation/2005/06/WorkItemTracking/faultdetail/03" /></detail> when uploading the global list via the process editor the error is: This issue is corrected in Update1 as the backslash is changed to a forward slash. ISSUE 2 The second issue is that when upgrading from 2010 to 2012, the builds in 2010 are not published to the 2012 global list.  After the upgrade the 2012 global lists doesn’t have any builds and only builds run in 2012 are published to the global list. This was reported to the MSDN forums and Connect. To correct this I wrote a utility to pull all the builds and recreate the builds global list for each project in each collection.  This is a console application with a program.cs, a globallists.cs and a app.config (not published here). The utility connects to TFS 2012, loops through the collections or a target collection as specified in the app.config. Then loops through the projects, the build definitions, and builds.  It creates a global list for each project if that project has at least one build. Then it imports the new list to TFS.  Here’s the code for program and globalists classes. Program.CS using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.TeamFoundation.Framework.Client; using Microsoft.TeamFoundation.Framework.Common; using Microsoft.TeamFoundation.Client; using Microsoft.TeamFoundation.Server; using System.IO; using System.Xml; using Microsoft.TeamFoundation.WorkItemTracking.Client; using System.Diagnostics; using Utilities; using System.Configuration; namespace TFSProjectUpdater_CLC { class Program { static void Main(string[] args) { DateTime temp_d = System.DateTime.Now; string logName = temp_d.ToShortDateString(); logName = logName.Replace("/", "_"); logName = logName + "_" + temp_d.TimeOfDay; logName = logName.Replace(":", "."); logName = "TFSGlobalListBuildsUpdater_" + logName + ".log"; Trace.Listeners.Add(new TextWriterTraceListener(Path.Combine(ConfigurationManager.AppSettings["logLocation"], logName))); Trace.AutoFlush = true; Trace.WriteLine("Start:" + DateTime.Now.ToString()); Console.WriteLine("Start:" + DateTime.Now.ToString()); string tfsServer = ConfigurationManager.AppSettings["TargetTFS"].ToString(); GlobalLists gl = new GlobalLists(); //replace this with the URL to your TFS instance. Uri tfsUri = new Uri("https://" + tfsServer + "/tfs"); //bool foundLite = false; TfsConfigurationServer config = new TfsConfigurationServer(tfsUri, new UICredentialsProvider()); config.EnsureAuthenticated(); ITeamProjectCollectionService collectionService = config.GetService<ITeamProjectCollectionService>(); IList<TeamProjectCollection> collections = collectionService.GetCollections().OrderBy(collection => collection.Name.ToString()).ToList(); //target Collection string targetCollection = ConfigurationManager.AppSettings["targetCollection"]; foreach (TeamProjectCollection coll in collections) { if (targetCollection.Equals(string.Empty)) { if (!coll.Name.Equals("TFS Archive") && !coll.Name.Equals("DefaultCol") && !coll.Name.Equals("Team Project Template Gallery")) { doWork(coll, tfsServer); } } else { if (coll.Name.Equals(targetCollection)) { doWork(coll, tfsServer); } } } Trace.WriteLine("Finished:" + DateTime.Now.ToString()); Console.WriteLine("Finished:" + DateTime.Now.ToString()); if (System.Diagnostics.Debugger.IsAttached) { Console.WriteLine("\nHit any key to exit..."); Console.ReadKey(); } Trace.Close(); } static void doWork(TeamProjectCollection coll, string tfsServer) { GlobalLists gl = new GlobalLists(); //target Collection string targetProject = ConfigurationManager.AppSettings["targetProject"]; Trace.WriteLine("Collection: " + coll.Name); Uri u = new Uri("https://" + tfsServer + "/tfs/" + coll.Name.ToString()); TfsTeamProjectCollection c = TfsTeamProjectCollectionFactory.GetTeamProjectCollection(u); ICommonStructureService icss = c.GetService<ICommonStructureService>(); try { Trace.WriteLine("\tChecking Collection Global Lists."); gl.RebuildBuildGlobalLists(c); } catch (Exception ex) { Console.WriteLine("Exception! :" + coll.Name); } } } } GlobalLists.CS using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.TeamFoundation.Client; using Microsoft.TeamFoundation.Framework.Client; using Microsoft.TeamFoundation.Framework.Common; using Microsoft.TeamFoundation.Server; using Microsoft.TeamFoundation.WorkItemTracking.Client; using Microsoft.TeamFoundation.Build.Client; using System.Configuration; using System.Xml; using System.Xml.Linq; using System.Diagnostics; namespace Utilities { public class GlobalLists { string GL_NewList = @"<gl:GLOBALLISTS xmlns:gl=""http://schemas.microsoft.com/VisualStudio/2005/workitemtracking/globallists""> <GLOBALLIST> </GLOBALLIST> </gl:GLOBALLISTS>"; public void RebuildBuildGlobalLists(TfsTeamProjectCollection _tfs) { WorkItemStore wis = new WorkItemStore(_tfs); //export the current globals lists file for the collection to save as a backup XmlDocument globalListsFile = wis.ExportGlobalLists(); globalListsFile.Save(@"c:\temp\" + _tfs.Name.Replace("\\", "_") + "_backupGlobalList.xml"); LogExportCurrentCollectionGlobalListsAsBackup(_tfs); //Build a new global build list from each build definition within each team project IBuildServer buildServer = _tfs.GetService<IBuildServer>(); foreach (Project p in wis.Projects) { XmlDocument newProjectGlobalList = new XmlDocument(); newProjectGlobalList.LoadXml(GL_NewList); LogInstanciateNewProjectBuildGlobalList(_tfs, p); BuildNewProjectBuildGlobalList(_tfs, wis, newProjectGlobalList, buildServer, p); LogEndOfProject(_tfs, p); } } // Private Methods private static void BuildNewProjectBuildGlobalList(TfsTeamProjectCollection _tfs, WorkItemStore wis, XmlDocument newProjectGlobalList, IBuildServer buildServer, Project p) { //locate the template node XmlNamespaceManager nsmgr = new XmlNamespaceManager(newProjectGlobalList.NameTable); nsmgr.AddNamespace("gl", "http://schemas.microsoft.com/VisualStudio/2005/workitemtracking/globallists"); XmlNode node = newProjectGlobalList.SelectSingleNode("//gl:GLOBALLISTS/GLOBALLIST", nsmgr); LogLocatedGlobalListNode(_tfs, p); //add the name attribute for the project build global list XmlElement buildListNode = (XmlElement)node; buildListNode.SetAttribute("name", "Builds - " + p.Name); LogAddedBuildNodeName(_tfs, p); //add new builds to the team project build global list bool buildsExist = false; if (AddNewBuilds(_tfs, newProjectGlobalList, buildServer, p, node, buildsExist)) { //import the new build global list for each project that has builds newProjectGlobalList.Save(@"c:\temp\" + _tfs.Name.Replace("\\", "_") + "_" + p.Name + "_" + "newGlobalList.xml"); //write out temp copy of the global list file to be imported LogImportReady(_tfs, p); wis.ImportGlobalLists(newProjectGlobalList.InnerXml); LogImportComplete(_tfs, p); } } private static bool AddNewBuilds(TfsTeamProjectCollection _tfs, XmlDocument newProjectGlobalList, IBuildServer buildServer, Project p, XmlNode node, bool buildsExist) { var buildDefinitions = buildServer.QueryBuildDefinitions(p.Name); foreach (var buildDefinition in buildDefinitions) { var builds = buildDefinition.QueryBuilds(); foreach (var build in builds) { //insert the builds into the current build list node in the correct 2012 format buildsExist = true; XmlElement listItem = newProjectGlobalList.CreateElement("LISTITEM"); listItem.SetAttribute("value", buildDefinition.Name + "/" + build.BuildNumber.ToString().Replace(buildDefinition.Name + "_", "")); node.AppendChild(listItem); } } if (buildsExist) LogBuildListCreated(_tfs, p); else LogNoBuildsInProject(_tfs, p); return buildsExist; } // Logging Methods private static void LogExportCurrentCollectionGlobalListsAsBackup(TfsTeamProjectCollection _tfs) { Trace.WriteLine("\tExported Global List for " + _tfs.Name + " collection."); Console.WriteLine("\tExported Global List for " + _tfs.Name + " collection."); } private void LogInstanciateNewProjectBuildGlobalList(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tInstanciated the new build global list for project " + p.Name + " in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tInstanciated the new build global list for project \n\t\t\t" + p.Name + " in the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogLocatedGlobalListNode(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tLocated the build global list node for project " + p.Name + " in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tLocated the build global list node for project \n\t\t\t" + p.Name + " in the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogAddedBuildNodeName(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tAdded the name attribute to the build global list for project " + p.Name + " in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tAdded the name attribute to the build global list for project \n\t\t\t" + p.Name + " in the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogBuildListCreated(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tAdded all builds into the " + "Builds - " + p.Name + " list in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tAdded all builds into the " + "Builds - \n\t\t\t" + p.Name + " list in the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogNoBuildsInProject(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tNo builds found for project " + p.Name + " in the " + _tfs.Name + " collection."); Console.WriteLine("\t\tNo builds found for project " + p.Name + " \n\t\t\tin the " + _tfs.Name + " collection."); } private void LogEndOfProject(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tEND OF PROJECT " + p.Name); Trace.WriteLine(" "); Console.WriteLine("\t\tEND OF PROJECT " + p.Name); Console.WriteLine(); } private static void LogImportReady(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tReady to import the build global list for project " + p.Name + " to the " + _tfs.Name + " collection."); Console.WriteLine("\t\tReady to import the build global list for project \n\t\t\t" + p.Name + " to the \n\t\t\t" + _tfs.Name + " collection."); } private static void LogImportComplete(TfsTeamProjectCollection _tfs, Project p) { Trace.WriteLine("\t\tImport of the build global list for project " + p.Name + " to the " + _tfs.Name + " collection completed."); Console.WriteLine("\t\tImport of the build global list for project \n\t\t\t" + p.Name + " to the \n\t\t\t" + _tfs.Name + " collection completed."); } } }

  Read the article

• Install NPM Packages Automatically for Node.js on Windows Azure Web Site

  - by Shaun

  In one of my previous post I described and demonstrated how to use NPM packages in Node.js and Windows Azure Web Site (WAWS). In that post I used NPM command to install packages, and then use Git for Windows to commit my changes and sync them to WAWS git repository. Then WAWS will trigger a new deployment to host my Node.js application. Someone may notice that, a NPM package may contains many files and could be a little bit huge. For example, the “azure” package, which is the Windows Azure SDK for Node.js, is about 6MB. Another popular package “express”, which is a rich MVC framework for Node.js, is about 1MB. When I firstly push my codes to Windows Azure, all of them must be uploaded to the cloud. Is that possible to let Windows Azure download and install these packages for us? In this post, I will introduce how to make WAWS install all required packages for us when deploying.   Let’s Start with Demo Demo is most straightforward. Let’s create a new WAWS and clone it to my local disk. Drag the folder into Git for Windows so that it can help us commit and push. Please refer to this post if you are not familiar with how to use Windows Azure Web Site, Git deployment, git clone and Git for Windows. And then open a command windows and install a package in our code folder. Let’s say I want to install “express”. And then created a new Node.js file named “server.js” and pasted the code as below. 1: var express = require("express"); 2: var app = express(); 3: 4: app.get("/", function(req, res) { 5: res.send("Hello Node.js and Express."); 6: }); 7: 8: console.log("Web application opened."); 9: app.listen(process.env.PORT); If we switch to Git for Windows right now we will find that it detected the changes we made, which includes the “server.js” and all files under “node_modules” folder. What we need to upload should only be our source code, but the huge package files also have to be uploaded as well. Now I will show you how to exclude them and let Windows Azure install the package on the cloud. First we need to add a special file named “.gitignore”. It seems cannot be done directly from the file explorer since this file only contains extension name. So we need to do it from command line. Navigate to the local repository folder and execute the command below to create an empty file named “.gitignore”. If the command windows asked for input just press Enter. 1: echo > .gitignore Now open this file and copy the content below and save. 1: node_modules Now if we switch to Git for Windows we will found that the packages under the “node_modules” were not in the change list. So now if we commit and push, the “express” packages will not be uploaded to Windows Azure. Second, let’s tell Windows Azure which packages it needs to install when deploying. Create another file named “package.json” and copy the content below into that file and save. 1: { 2: "name": "npmdemo", 3: "version": "1.0.0", 4: "dependencies": { 5: "express": "*" 6: } 7: } Now back to Git for Windows, commit our changes and push it to WAWS. Then let’s open the WAWS in developer portal, we will see that there’s a new deployment finished. Click the arrow right side of this deployment we can see how WAWS handle this deployment. Especially we can find WAWS executed NPM. And if we opened the log we can review what command WAWS executed to install the packages and the installation output messages. As you can see WAWS installed “express” for me from the cloud side, so that I don’t need to upload the whole bunch of the package to Azure. Open this website and we can see the result, which proved the “express” had been installed successfully.   What’s Happened Under the Hood Now let’s explain a bit on what the “.gitignore” and “package.json” mean. The “.gitignore” is an ignore configuration file for git repository. All files and folders listed in the “.gitignore” will be skipped from git push. In the example below I copied “node_modules” into this file in my local repository. This means,  do not track and upload all files under the “node_modules” folder. So by using “.gitignore” I skipped all packages from uploading to Windows Azure. “.gitignore” can contain files, folders. It can also contain the files and folders that we do NOT want to ignore. In the next section we will see how to use the un-ignore syntax to make the SQL package included. The “package.json” file is the package definition file for Node.js application. We can define the application name, version, description, author, etc. information in it in JSON format. And we can also put the dependent packages as well, to indicate which packages this Node.js application is needed. In WAWS, name and version is necessary. And when a deployment happened, WAWS will look into this file, find the dependent packages, execute the NPM command to install them one by one. So in the demo above I copied “express” into this file so that WAWS will install it for me automatically. I updated the dependencies section of the “package.json” file manually. But this can be done partially automatically. If we have a valid “package.json” in our local repository, then when we are going to install some packages we can specify “--save” parameter in “npm install” command, so that NPM will help us upgrade the dependencies part. For example, when I wanted to install “azure” package I should execute the command as below. Note that I added “--save” with the command. 1: npm install azure --save Once it finished my “package.json” will be updated automatically. Each dependent packages will be presented here. The JSON key is the package name while the value is the version range. Below is a brief list of the version range format. For more information about the “package.json” please refer here. Format Description Example version Must match the version exactly. "azure": "0.6.7" >=version Must be equal or great than the version. "azure": ">0.6.0" 1.2.x The version number must start with the supplied digits, but any digit may be used in place of the x. "azure": "0.6.x" ~version The version must be at least as high as the range, and it must be less than the next major revision above the range. "azure": "~0.6.7" * Matches any version. "azure": "*" And WAWS will install the proper version of the packages based on what you defined here. The process of WAWS git deployment and NPM installation would be like this.   But Some Packages… As we know, when we specified the dependencies in “package.json” WAWS will download and install them on the cloud. For most of packages it works very well. But there are some special packages may not work. This means, if the package installation needs some special environment restraints it might be failed. For example, the SQL Server Driver for Node.js package needs “node-gyp”, Python and C++ 2010 installed on the target machine during the NPM installation. If we just put the “msnodesql” in “package.json” file and push it to WAWS, the deployment will be failed since there’s no “node-gyp”, Python and C++ 2010 in the WAWS virtual machine. For example, the “server.js” file. 1: var express = require("express"); 2: var app = express(); 3: 4: app.get("/", function(req, res) { 5: res.send("Hello Node.js and Express."); 6: }); 7:  8: var sql = require("msnodesql"); 9: var connectionString = "Driver={SQL Server Native Client 10.0};Server=tcp:tqy4c0isfr.database.windows.net,1433;Database=msteched2012;Uid=shaunxu@tqy4c0isfr;Pwd=P@ssw0rd123;Encrypt=yes;Connection Timeout=30;"; 10: app.get("/sql", function (req, res) { 11: sql.open(connectionString, function (err, conn) { 12: if (err) { 13: console.log(err); 14: res.send(500, "Cannot open connection."); 15: } 16: else { 17: conn.queryRaw("SELECT * FROM [Resource]", function (err, results) { 18: if (err) { 19: console.log(err); 20: res.send(500, "Cannot retrieve records."); 21: } 22: else { 23: res.json(results); 24: } 25: }); 26: } 27: }); 28: }); 29: 30: console.log("Web application opened."); 31: app.listen(process.env.PORT); The “package.json” file. 1: { 2: "name": "npmdemo", 3: "version": "1.0.0", 4: "dependencies": { 5: "express": "*", 6: "msnodesql": "*" 7: } 8: } And it failed to deploy to WAWS. From the NPM log we can see it’s because “msnodesql” cannot be installed on WAWS. The solution is, in “.gitignore” file we should ignore all packages except the “msnodesql”, and upload the package by ourselves. This can be done by use the content as below. We firstly un-ignored the “node_modules” folder. And then we ignored all sub folders but need git to check each sub folders. And then we un-ignore one of the sub folders named “msnodesql” which is the SQL Server Node.js Driver. 1: !node_modules/ 2:  3: node_modules/* 4: !node_modules/msnodesql For more information about the syntax of “.gitignore” please refer to this thread. Now if we go to Git for Windows we will find the “msnodesql” was included in the uncommitted set while “express” was not. I also need remove the dependency of “msnodesql” from “package.json”. Commit and push to WAWS. Now we can see the deployment successfully done. And then we can use the Windows Azure SQL Database from our Node.js application through the “msnodesql” package we uploaded.   Summary In this post I demonstrated how to leverage the deployment process of Windows Azure Web Site to install NPM packages during the publish action. With the “.gitignore” and “package.json” file we can ignore the dependent packages from our Node.js and let Windows Azure Web Site download and install them while deployed. For some special packages that cannot be installed by Windows Azure Web Site, such as “msnodesql”, we can put them into the publish payload as well. With the combination of Windows Azure Web Site, Node.js and NPM it makes even more easy and quick for us to develop and deploy our Node.js application to the cloud.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• CodePlex Daily Summary for Monday, January 10, 2011

  CodePlex Daily Summary for Monday, January 10, 2011Popular ReleasesSense/Net Enterprise Portal & ECMS: SenseNet 6.0.1 Community Edition for .NET 4: SenseNet 6.0.1 Community Edition for .NET 4 with SQL CE 4.0 This half year we have been working quite fiercely to bring you the long-awaited release of Sense/Net 6.0. Download this Community Edition for .NET 4 Platform to see what we have been up to. These months we have worked on getting the WebCMS capabilities of Sense/Net 6.0 up to par. New features include: New, powerful page and portlet editing experience. HTML and CSS cleanup, new, powerful site skinning system. Upgraded, light...Agile Personal Body Of Knowledge: ????－????，???? v0.2.pdf: ????【????－????，????.pdf】???，?????????????????????????????，???????????，???????。 ??????????，??????????，????????，?????????！ ????sina??：http://q.t.sina.com.cn/135484VSSpeedster - Parallel Builds for VS: VSSpeedster 1.1: - Parallel Builds with MSBuild integrated in Visual StudioBernie's Trackviewer: Bernie's Trackviewer Version 1.2: Redesigned user interface of main form Also displays waypoints which are not part of a track Can convert a route int a track Maximum age of cached maps can be setPeople's Note: People's Note 0.21: Replaced note viewer buttons with a menu bar to improve scrolling performance. Fixed database relocation on low-resolution devices; thanks to compaNet for reporting. Improved signin error messages. To install: copy the appropriate CAB file onto your WM device and run it.mytrip.mvc (CMS & e-Commerce): mytrip.mvc 1.0.51.0 beta2: WEB.mytrip.mvc 1.0.51.0 Web for install hosting System Requirements: NET 4.0, MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) SRC.mytrip.mvc 1.0.51.0 System Requirements: Visual Studio 2010 or Web Deweloper 2010 MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) Connector/Net 6.3.5, MVC3 RC WARNING For run and debug SRC.mytrip.mvc 1.0.51.0 download and install MVC3 RC...EnhSim: EnhSim 2.3.0: 2.3.0This release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Changed how flame shoc...AutoLoL: AutoLoL v1.5.3: A message will be displayed when there's an update available Shows a list of recent mastery files in the Editor Tab (requested by quite a few people) Updater: Update information is now scrollable Added a buton to launch AutoLoL after updating is finished Updated the UI to match that of AutoLoL Fix: Detects and resolves 'Read Only' state on Version.xmlHawkeye - The .Net Runtime Object Editor: Hawkeye 1.2.4: [EDIT: 2010/01/10] In the case you are running an x86 Windows; please wait until Release 1.2.5 is made available: Hawkeye is broken on these OS. This is a maintenance release providing bug fixes. It comes in two flavors: Hawkeye.124.N2 is the standard .NET 2 build, was compiled with Visual Studio 2005 and can only inspect .NET 2 applications. Hawkeye.124.N4 is a .NET4 2 build, was compiled with Visual Studio 2010 and can only inspect .NET 4 applications. Please be patient until Release 1.3...Extended WPF Toolkit: Extended WPF Toolkit - 1.3.0: What's in the 1.3.0 Release?BusyIndicator ButtonSpinner ChildWindow ColorPicker - Updated (Breaking Changes) DateTimeUpDown - New Control Magnifier - New Control MaskedTextBox - New Control MessageBox NumericUpDown RichTextBox RichTextBoxFormatBar - Updated .NET 3.5 binaries and SourcePlease note: The Extended WPF Toolkit 3.5 is dependent on .NET Framework 3.5 and the WPFToolkit. You must install .NET Framework 3.5 and the WPFToolkit in order to use any features in the To...sNPCedit: sNPCedit v0.9d: added elementclient coordinate catcher to catch coordinates select a target (ingame) i.e. your char, npc or monster than click the button and coordinates+direction will be transfered to the selected row in the table corrected labels from Rot to Direction (because it is a vector)Ionics Isapi Rewrite Filter: 2.1 latest stable: V2.1 is stable, and is in maintenance mode. This is v2.1.1.25. It is a bug-fix release. There are no new features. 28629 29172 28722 27626 28074 29164 27659 27900 many documentation updates and fixes proper x64 build environment. This release includes x64 binaries in zip form, but no x64 MSI file. You'll have to manually install x64 servers, following the instructions in the documentation.StyleCop for ReSharper: StyleCop for ReSharper 5.1.14980.000: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new ObjectBasedEnvironment object does not resolve the StyleCop installation path, thus it does not return the correct path ...VivoSocial: VivoSocial 7.4.1: New release with bug fixes and updates for performance..NET Extensions - Extension Methods Library for C# and VB.NET: Release 2011.03: Added lot's of new extensions and new projects for MVC and Entity Framework. object.FindTypeByRecursion Int32.InRange String.RemoveAllSpecialCharacters String.IsEmptyOrWhiteSpace String.IsNotEmptyOrWhiteSpace String.IfEmptyOrWhiteSpace String.ToUpperFirstLetter String.GetBytes String.ToTitleCase String.ToPlural DateTime.GetDaysInYear DateTime.GetPeriodOfDay IEnumberable.RemoveAll IEnumberable.Distinct ICollection.RemoveAll IList.Join IList.Match IList.Cast Array.IsNullOrEmpty Array.W...EFMVC - ASP.NET MVC 3 and EF Code First: EFMVC 0.5- ASP.NET MVC 3 and EF Code First: Demo web app ASP.NET MVC 3, Razor and EF Code FirstVidCoder: 0.8.0: Added x64 version. Made the audio output preview more detailed and accurate. If the chosen encoder or mixdown is incompatible with the source, the fallback that will be used is displayed. Added "Auto" to the audio mixdown choices. Reworked non-anamorphic size calculation to work better with non-standard pixel aspect ratios and cropping. Reworked Custom anamorphic to be more intuitive and allow display width to be set automatically (Thanks, Statick). Allowing higher bitrates for 6-ch....NET Voice Recorder: Auto-Tune Release: This is the source code and binaries to accompany the article on the Coding 4 Fun website. It is the Auto Tuner release of the .NET Voice Recorder application.BloodSim: BloodSim - 1.3.2.0: - Simulation Log is now automatically disabled and hidden when running 10 or more iterations - Hit and Expertise are now entered by Rating, and include option for a Racial Expertise bonus - Added option for boss to use a periodic magic ability (Dragon Breath) - Added option for boss to periodically Enrage, gaining a Damage/Attack Speed buffJson.NET: Json.NET 4.0 Release 1: New feature - Added Windows Phone 7 project New feature - Added dynamic support to LINQ to JSON New feature - Added dynamic support to serializer New feature - Added INotifyCollectionChanged to JContainer in .NET 4 build New feature - Added ReadAsDateTimeOffset to JsonReader New feature - Added ReadAsDecimal to JsonReader New feature - Added covariance to IJEnumerable type parameter New feature - Added XmlSerializer style Specified property support New feature - Added ...New ProjectsAssimpXna: AssimpXna is a custom model importer for Xna 4.0 using the Open Asset Import Library (Assimp).ATCSim: This is an atc sim for a school projectAzure Role-Based Deployment: Azure Role-Based Deployment demonstrates how to use the CreateDeployment Windows Azure Service Management API to deploy an app from within a web role. This code can easily be ported to a worker role and thus included in the managment pack for a hosted service.CodeKata AltNet Hispano: Ejemplos de Code Kata usados por la comunidad AltNet Hispano.DataStoreCleaner: DataStoreCleaner clears "DataStore" folder which manages Windows Update History. It is useful for fixing WU error, or tune up Windows start-up. It's developed in C#.DS_HW2: dshw2EFT Calculator: EFT Calculator is an application that performs common cryptographic operations used in electronic funds transfer applications.Entity Visualizers: This project has debugger visualizers for several objects in the Entity Framework: EntityObject, EntityCollection, ObjectQuery and ObjectContext. Some of the source code is based on code from Julie Lerman's book "Programming Entity Framework".EzyCMS - Easy and Simple CMS made by ASP.Net MVC: EzyCMS makes both of end user and developer enjoy CMS benefit and extendability to perform requirements. The design principles: EASY TO USE, EASY TO EXTEND, FLEXIBLE AND PWOERFUL TECHNOLOGY: ASP.Net MVC2, NHibernate, StructureMap, JQueryFlatStore: Simple library to simplify storage of application data when a bulky dedicated database is cumbersome and unnecessaryGigantornis: Gigantornis is a tool for benchmarking your Hypertext Transfer Protocol (HTTP) server. It is designed to give you an impression of how your current server installation performs. This especially shows you how many requests per second your server installation is capable of serving.Gonte.Dal: Data access layer for NETLezatrus: Lezatrus is the open source project to help people find places to eat in Jakarta. It's developed in ASP.NET MVC using Razor and C#. It's the sample app for Pro ASP.NET MVC Coding Ninja facebook group.Moo: Moo is an object-to-object multi-mapper. It is able to use multiple different strategies (in a mix of convention, configuration, attributes and fluent calls) when mapping from one object to another.MvcXaml: A custom View Engine for ASP.NET MVC that allows Controller Action Methods to return dynamically generated images based on XAML markup.Perfect World Bot Development FrameWork: <empty yet>Silverlight motion detection: Motion detection using Silverlight 4 camera support and a simple motion detection algorithm.Small IT Business Manager: Small IT Business Manager is a tool being created keeping small-midsize IT companies in mind to allow them manage their day to day chores. Management Features planned: * Workers * Timesheets * Financial * HR * Basic Project Management * Invoicingsomething for testing: mot do an mau de test cac van de lien quan toi codeStructure Copier: This small program is supposed to copy tree structure of directory.TogNet: A small utility program to toggle between windows network adapters. Needed a program like this to switch between an external Wireless network and the corporate Lan network adapter.

  Read the article

• HTML5-MVC application using VS2010 SP1

  - by nmarun

  This is my first attempt at creating HTML5 pages. VS 2010 allows working with HTML5 now (you just need to make a small change after installing SP1). So my Razor view is now a HTML5 page. I call this application - 5Commerce – (an over-simplified) HTML5 ECommerce site. So here’s the flow of the application: home page renders user enters first and last name, chooses a product and the quantity can enter additional instructions for the order place the order user is then taken to another page showing the order details Off to the details. This is what my page looks in Google Chrome 10 beta (or later) soon after it renders. Here are some of the things to observe on this. Look a little closer and you’ll see a border around the first name textbox – this is ‘autofocus’ in action. I’ve set the autofocus attribute on this textbox. So as soon as the page loads, this control gets focus. 1: <input type="text" autofocus id="firstName" class="inputWidth" data_minlength="" 2: data_maxlength="" placeholder="first name" /> See a partially grayed out ‘last name’ text in the second textbox. This is set using a placeholder attribute (see above). It gets wiped out on-focus and improves the UI visuals in general. The quantity textbox is actually a numerical-only textbox. 1: <input type="number" id="quantity" data_mincount="" class="inputWidth" /> The last line is for additional instructions. This looks like a label but it’s content is editable. Just adding the ‘contenteditable’ attribute to the span allow the user to edit the text inside. 1: <span contenteditable id="additionalInstructions" data_texttype="" class="editableContent">select text and edit </span> All of the above is just plain HTML (no lurking javascript acting in here). Makes it real clean and simple. Going more into the HTML, I see that the _Layout.cshtml already is using some HTML5 content. I created my project before installing SP1, so that was the reason for my surprise. 1: <!DOCTYPE html> This is the doctype declaration in HTML5 and this is supported even by IE6 (just take my word on IE6 now, don’t go install it to test it, especially when MS is doing an IE6 countdown). That’s just amazing and extremely easy to read remember and talk about a few less bytes on every call! I modified the rest of my _Layout.cshtml to the below: 1: <!DOCTYPE html> 2: <html> 3: <head> 4: <title>5Commerce - HTML 5 Ecommerce site</title> 5: <link href="@Url.Content("~/Content/Site.css")" rel="stylesheet" type="text/css" /> 6: <script src="@Url.Content("~/Scripts/jquery-1.4.4.min.js")" type="text/javascript"></script> 7: <script src="@Url.Content("~/Scripts/CustomScripts.js")" type="text/javascript"></script> 8: <script type="text/javascript"> 9: $(document).ready(function () { 10: WireupEvents(); 11: }); 12:</script> 13:  14: </head> 15:  16: <body role="document" class="bodybackground"> 17: <header role="heading"> 18: <h2>5Commerce - HTML 5 Ecommerce site!</h2> 19: </header> 20: <section id="mainForm"> 21: @RenderBody() 22: </section> 23: <footer id="page_footer" role="siteBaseInfo"> 24: <p>&copy; 2011 5Commerce Inc!</p> 25: </footer> 26: </body> 27: </html> I’m sure you’re seeing some of the new tags here. To give a brief intro about them: <header>, <footer>: Marks the header/footer region of a page or section. <section>: A logical grouping of content role attribute: Identifies the responsibility of an element. This attribute can be used by screen readers and can also be filtered through jQuery. SP1 also allows for some intellisense in HTML5. You see the other types of input fields – email, date, datetime, month, url and there are others as well. So once my page loads, i.e., ‘on document ready’, I’m wiring up the events following the principles of unobtrusive javascript. In the snippet below, I’m controlling the behavior of the input controls for specific events. 1: $("#productList").bind('change blur', function () { 2: IsSelectedProductValid(); 3: }); 4:  5: $("#quantity").bind('blur', function () { 6: IsQuantityValid(); 7: }); 8:  9: $("#placeOrderButton").click( 10: function () { 11: if (IsPageValid()) { 12: LoadProducts(); 13: } 14: }); This enables some client-side validation to occur before the data is sent to the server. These validation constraints are obtained through a JSON call to the WCF service and are set to the ‘data_’ attributes of the input controls. Have a look at the ‘GetValidators()’ function below: 1: function GetValidators() { 2: // the post to your webservice or page 3: $.ajax({ 4: type: "GET", //GET or POST or PUT or DELETE verb 5: url: "http://localhost:14805/OrderService.svc/GetValidators", // Location of the service 6: data: "{}", //Data sent to server 7: contentType: "application/json; charset=utf-8", // content type sent to server 8: dataType: "json", //Expected data format from server 9: processdata: true, //True or False 10: success: function (result) {//On Successfull service call 11: if (result.length > 0) { 12: for (i = 0; i < result.length; i++) { 13: if (result[i].PropertyName == "FirstName") { 14: if (result[i].MinLength > 0) { 15: $("#firstName").attr("data_minLength", result[i].MinLength); 16: } 17: if (result[i].MaxLength > 0) { 18: $("#firstName").attr("data_maxLength", result[i].MaxLength); 19: } 20: } 21: else if (result[i].PropertyName == "LastName") { 22: if (result[i].MinLength > 0) { 23: $("#lastName").attr("data_minLength", result[i].MinLength); 24: } 25: if (result[i].MaxLength > 0) { 26: $("#lastName").attr("data_maxLength", result[i].MaxLength); 27: } 28: } 29: else if (result[i].PropertyName == "Quantity") { 30: if (result[i].MinCount > 0) { 31: $("#quantity").attr("data_minCount", result[i].MinCount); 32: } 33: } 34: else if (result[i].PropertyName == "AdditionalInstructions") { 35: if (result[i].TextType.length > 0) { 36: $("#additionalInstructions").attr("data_textType", result[i].TextType); 37: } 38: } 39: } 40: } 41: }, 42: error: function (result) {// When Service call fails 43: alert('Service call failed: ' + result.status + ' ' + result.statusText); 44: } 45: }); 46:  47: //.... 48: } Just before the GetValidators() function runs and sets the validation constraints, this is what the html looks like (seen through the Dev tools of Chrome): After the function executes, you see the values in the ‘data_’  attributes. As and when we enter valid data into these fields, the error messages disappear, since the validation is bound to the blur event of the control. There you see… no error messages (well, the catch here is that once you enter THAT name, all errors disappear automatically). Clicking on ‘Place Order!’ runs the SaveOrder function. You can see the JSON for the order object that is getting constructed and passed to the WCF Service. 1: function SaveOrder() { 2: var addlInstructionsDefaultText = "select text and edit"; 3: var addlInstructions = $("span:first").text(); 4: if(addlInstructions == addlInstructionsDefaultText) 5: { 6: addlInstructions = ''; 7: } 8: var orderJson = { 9: AdditionalInstructions: addlInstructions, 10: Customer: { 11: FirstName: $("#firstName").val(), 12: LastName: $("#lastName").val() 13: }, 14: OrderedProduct: { 15: Id: $("#productList").val(), 16: Quantity: $("#quantity").val() 17: } 18: }; 19:  20: // the post to your webservice or page 21: $.ajax({ 22: type: "POST", //GET or POST or PUT or DELETE verb 23: url: "http://localhost:14805/OrderService.svc/SaveOrder", // Location of the service 24: data: JSON.stringify(orderJson), //Data sent to server 25: contentType: "application/json; charset=utf-8", // content type sent to server 26: dataType: "json", //Expected data format from server 27: processdata: false, //True or False 28: success: function (result) {//On Successfull service call 29: window.location.href = "http://localhost:14805/home/ShowOrderDetail/" + result; 30: }, 31: error: function (request, error) {// When Service call fails 32: alert('Service call failed: ' + request.status + ' ' + request.statusText); 33: } 34: }); 35: } The service saves this order into an XML file and returns the order id (a guid). On success, I redirect to the ShowOrderDetail action method passing the guid. This page will show all the details of the order. Although the back-end weightlifting is done by WCF, I did not show any of that plumbing-work as I wanted to concentrate more on the HTML5 and its associates. However, you can see it all in the source here. I do have one issue with HTML5 and this is an existing issue with HTML4 as well. If you see the snippet above where I’ve declared a textbox for first name, you’ll see the autofocus attribute just dangling by itself. It doesn’t follow the xml syntax of ‘key="value"’ allowing users to continue writing badly-formatted html even in the new version. You’ll see the same issue with the ‘contenteditable’ attribute as well. The work-around is that you can do ‘autofocus=”true”’ and it’ll work fine plus make it well-formatted. But unless the standards enforce this, there will be people (me included) who’ll get by, by just typing the bare minimum! Hoping this will get fixed in the coming version-updates. Source code here. Verdict: I think it’s time for us to embrace the new HTML5. Thank you HTML4 and Welcome HTML5.

  Read the article

• New ways for backup, recovery and restore of Essbase Block Storage databases – part 2 by Bernhard Kinkel

  - by Alexandra Georgescu

  After discussing in the first part of this article new options in Essbase for the general backup and restore, this second part will deal with the also rather new feature of Transaction Logging and Replay, which was released in version 11.1, enhancing existing restore options. Tip: Transaction logging and replay cannot be used for aggregate storage databases. Please refer to the Oracle Hyperion Enterprise Performance Management System Backup and Recovery Guide (rel. 11.1.2.1). Even if backups are done on a regular, frequent base, subsequent data entries, loads or calculations would not be reflected in a restored database. Activating Transaction Logging could fill that gap and provides you with an option to capture these post-backup transactions for later replay. The following table shows, which are the transactions that could be logged when Transaction Logging is enabled: In order to activate its usage, corresponding statements could be added to the Essbase.cfg file, using the TRANSACTIONLOGLOCATION command. The complete syntax reads: TRANSACTIONLOGLOCATION [ appname [ dbname]] LOGLOCATION NATIVE ?ENABLE | DISABLE Where appname and dbname are optional parameters giving you the chance in combination with the ENABLE or DISABLE command to set Transaction Logging for certain applications or databases or to exclude them from being logged. If only an appname is specified, the setting applies to all databases in that particular application. If appname and dbname are not defined, all applications and databases would be covered. LOGLOCATION specifies the directory to which the log is written, e.g. D:\temp\trlogs. This directory must already exist or needs to be created before using it for log information being written to it. NATIVE is a reserved keyword that shouldn’t be changed. The following example shows how to first enable logging on a more general level for all databases in the application Sample, followed by a disabling statement on a more granular level for only the Basic database in application Sample, hence excluding it from being logged. TRANSACTIONLOGLOCATION Sample Hyperion/trlog/Sample NATIVE ENABLE TRANSACTIONLOGLOCATION Sample Basic Hyperion/trlog/Sample NATIVE DISABLE Tip: After applying changes to the configuration file you must restart the Essbase server in order to initialize the settings. A maybe required replay of logged transactions after restoring a database can be done only by administrators. The following options are available: In Administration Services selecting Replay Transactions on the right-click menu on the database: Here you can select to replay transactions logged after the last replay request was originally executed or after the time of the last restored backup (whichever occurred later) or transactions logged after a specified time. Or you can replay transactions selectively based on a range of sequence IDs, which can be accessed using Display Transactions on the right-click menu on the database: These sequence ID s (0, 1, 2 … 7 in the screenshot below) are assigned to each logged transaction, indicating the order in which the transaction was performed. This helps to ensure the integrity of the restored data after a replay, as the replay of transactions is enforced in the same order in which they were originally performed. So for example a calculation originally run after a data load cannot be replayed before having replayed the data load first. After a transaction is replayed, you can replay only transactions with a greater sequence ID. For example, replaying the transaction with sequence ID of 4 includes all preceding transactions, while afterwards you can only replay transactions with a sequence ID of 5 or greater. Tip: After restoring a database from a backup you should always completely replay all logged transactions, which were executed after the backup, before executing new transactions. But not only the transaction information itself needs to be logged and stored in a specified directory as described above. During transaction logging, Essbase also creates archive copies of data load and rules files in the following default directory: ARBORPATH/app/appname/dbname/Replay These files are then used during the replay of a logged transaction. By default Essbase archives only data load and rules files for client data loads, but in order to specify the type of data to archive when logging transactions you can use the command TRANSACTIONLOGDATALOADARCHIVE as an additional entry in the Essbase.cfg file. The syntax for the statement is: TRANSACTIONLOGDATALOADARCHIVE [appname [dbname]] [OPTION] While to the [appname [dbname]] argument the same applies like before for TRANSACTIONLOGLOCATION, the valid values for the OPTION argument are the following: Make the respective setting for which files copies should be logged, considering from which location transactions are usually taking place. Selecting the NONE option prevents Essbase from saving the respective files and the data load cannot be replayed. In this case you must first manually load the data before you can replay the transactions. Tip: If you use server or SQL data and the data and rules files are not archived in the Replay directory (for example, you did not use the SERVER or SERVER_CLIENT option), Essbase replays the data that is actually in the data source at the moment of the replay, which may or may not be the data that was originally loaded. You can find more detailed information in the following documents: Oracle Hyperion Enterprise Performance Management System Backup and Recovery Guide (rel. 11.1.2.1) Oracle Essbase Online Documentation (rel. 11.1.2.1)) Enterprise Performance Management System Documentation (including previous releases) Or on the Oracle Technology Network. If you are also interested in other new features and smart enhancements in Essbase or Hyperion Planning stay tuned for coming articles or check our training courses and web presentations. You can find general information about offerings for the Essbase and Planning curriculum or other Oracle-Hyperion products here; (please make sure to select your country/region at the top of this page) or in the OU Learning paths section, where Planning, Essbase and other Hyperion products can be found under the Fusion Middleware heading (again, please select the right country/region). Or drop me a note directly: [email protected]. About the Author: Bernhard Kinkel started working for Hyperion Solutions as a Presales Consultant and Consultant in 1998 and moved to Hyperion Education Services in 1999. He joined Oracle University in 2007 where he is a Principal Education Consultant. Based on these many years of working with Hyperion products he has detailed product knowledge across several versions. He delivers both classroom and live virtual courses. His areas of expertise are Oracle/Hyperion Essbase, Oracle Hyperion Planning and Hyperion Web Analysis. Disclaimer: All methods and features mentioned in this article must be considered and tested carefully related to your environment, processes and requirements. As guidance please always refer to the available software documentation. This article does not recommend or advise any explicit action or change, hence the author cannot be held responsible for any consequences due to the use or implementation of these features.

  Read the article

• Two network interfaces and two IP addresses on the same subnet in Linux

  - by Scott Duckworth

  I recently ran into a situation where I needed two IP addresses on the same subnet assigned to one Linux host so that we could run two SSL/TLS sites. My first approach was to use IP aliasing, e.g. using eth0:0, eth0:1, etc, but our network admins have some fairly strict settings in place for security that squashed this idea: They use DHCP snooping and normally don't allow static IP addresses. Static addressing is accomplished by using static DHCP entries, so the same MAC address always gets the same IP assignment. This feature can be disabled per switchport if you ask and you have a reason for it (thankfully I have a good relationship with the network guys and this isn't hard to do). With the DHCP snooping disabled on the switchport, they had to put in a rule on the switch that said MAC address X is allowed to have IP address Y. Unfortunately this had the side effect of also saying that MAC address X is ONLY allowed to have IP address Y. IP aliasing required that MAC address X was assigned two IP addresses, so this didn't work. There may have been a way around these issues on the switch configuration, but in an attempt to preserve good relations with the network admins I tried to find another way. Having two network interfaces seemed like the next logical step. Thankfully this Linux system is a virtual machine, so I was able to easily add a second network interface (without rebooting, I might add - pretty cool). A few keystrokes later I had two network interfaces up and running and both pulled IP addresses from DHCP. But then the problem came in: the network admins could see (on the switch) the ARP entry for both interfaces, but only the first network interface that I brought up would respond to pings or any sort of TCP or UDP traffic. After lots of digging and poking, here's what I came up with. It seems to work, but it also seems to be a lot of work for something that seems like it should be simple. Any alternate ideas out there? Step 1: Enable ARP filtering on all interfaces: # sysctl -w net.ipv4.conf.all.arp_filter=1 # echo "net.ipv4.conf.all.arp_filter = 1" >> /etc/sysctl.conf From the file networking/ip-sysctl.txt in the Linux kernel docs: arp_filter - BOOLEAN 1 - Allows you to have multiple network interfaces on the same subnet, and have the ARPs for each interface be answered based on whether or not the kernel would route a packet from the ARP'd IP out that interface (therefore you must use source based routing for this to work). In other words it allows control of which cards (usually 1) will respond to an arp request. 0 - (default) The kernel can respond to arp requests with addresses from other interfaces. This may seem wrong but it usually makes sense, because it increases the chance of successful communication. IP addresses are owned by the complete host on Linux, not by particular interfaces. Only for more complex setups like load- balancing, does this behaviour cause problems. arp_filter for the interface will be enabled if at least one of conf/{all,interface}/arp_filter is set to TRUE, it will be disabled otherwise Step 2: Implement source-based routing I basically just followed directions from http://lartc.org/howto/lartc.rpdb.multiple-links.html, although that page was written with a different goal in mind (dealing with two ISPs). Assume that the subnet is 10.0.0.0/24, the gateway is 10.0.0.1, the IP address for eth0 is 10.0.0.100, and the IP address for eth1 is 10.0.0.101. Define two new routing tables named eth0 and eth1 in /etc/iproute2/rt_tables: ... top of file omitted ... 1 eth0 2 eth1 Define the routes for these two tables: # ip route add default via 10.0.0.1 table eth0 # ip route add default via 10.0.0.1 table eth1 # ip route add 10.0.0.0/24 dev eth0 src 10.0.0.100 table eth0 # ip route add 10.0.0.0/24 dev eth1 src 10.0.0.101 table eth1 Define the rules for when to use the new routing tables: # ip rule add from 10.0.0.100 table eth0 # ip rule add from 10.0.0.101 table eth1 The main routing table was already taken care of by DHCP (and it's not even clear that its strictly necessary in this case), but it basically equates to this: # ip route add default via 10.0.0.1 dev eth0 # ip route add 130.127.48.0/23 dev eth0 src 10.0.0.100 # ip route add 130.127.48.0/23 dev eth1 src 10.0.0.101 And voila! Everything seems to work just fine. Sending pings to both IP addresses works fine. Sending pings from this system to other systems and forcing the ping to use a specific interface works fine (ping -I eth0 10.0.0.1, ping -I eth1 10.0.0.1). And most importantly, all TCP and UDP traffic to/from either IP address works as expected. So again, my question is: is there a better way to do this? This seems like a lot of work for a seemingly simple problem.

  Read the article

• SQL SERVER – Using expressor Composite Types to Enforce Business Rules

  - by pinaldave

  One of the features that distinguish the expressor Data Integration Platform from other products in the data integration space is its concept of composite types, which provide an effective and easily reusable way to clearly define the structure and characteristics of data within your application.  An important feature of the composite type approach is that it allows you to easily adjust the content of a record to its ultimate purpose.  For example, a record used to update a row in a database table is easily defined to include only the minimum set of columns, that is, a value for the key column and values for only those columns that need to be updated. Much like a class in higher level programming languages, you can also use the composite type as a way to enforce business rules onto your data by encapsulating a datum’s name, data type, and constraints (for example, maximum, minimum, or acceptable values) as a single entity, which ensures that your data can not assume an invalid value.  To what extent you use this functionality is a decision you make when designing your application; the expressor design paradigm does not force this approach on you. Let’s take a look at how these features are used.  Suppose you want to create a group of applications that maintain the employee table in your human resources database. Your table might have a structure similar to the HumanResources.Employee table in the AdventureWorks database.  This table includes two columns, EmployeID and rowguid, that are maintained by the relational database management system; you cannot provide values for these columns when inserting new rows into the table. Additionally, there are columns such as VacationHours and SickLeaveHours that you might choose to update for all employees on a monthly basis, which justifies creation of a dedicated application. By creating distinct composite types for the read, insert and update operations against this table, you can more easily manage this table’s content. When developing this application within expressor Studio, your first task is to create a schema artifact for the database table.  This process is completely driven by a wizard, only requiring that you select the desired database schema and table.  The resulting schema artifact defines the mapping of result set records to a record within the expressor data integration application.  The structure of the record within the expressor application is a composite type that is given the default name CompositeType1.  As you can see in the following figure, all columns from the table are included in the result set and mapped to an identically named attribute in the default composite type. If you are developing an application that needs to read this table, perhaps to prepare a year-end report of employees by department, you would probably not be interested in the data in the rowguid and ModifiedDate columns.  A typical approach would be to drop this unwanted data in a downstream operator.  But using an alternative composite type provides a better approach in which the unwanted data never enters your application. While working in expressor  Studio’s schema editor, simply create a second composite type within the same schema artifact, which you could name ReadTable, and remove the attributes corresponding to the unwanted columns. The value of an alternative composite type is even more apparent when you want to insert into or update the table.  In the composite type used to insert rows, remove the attributes corresponding to the EmployeeID primary key and rowguid uniqueidentifier columns since these values are provided by the relational database management system. And to update just the VacationHours and SickLeaveHours columns, use a composite type that includes only the attributes corresponding to the EmployeeID, VacationHours, SickLeaveHours and ModifiedDate columns. By specifying this schema artifact and composite type in a Write Table operator, your upstream application need only deal with the four required attributes and there is no risk of unintentionally overwriting a value in a column that does not need to be updated. Now, what about the option to use the composite type to enforce business rules?  If you review the composition of the default composite type CompositeType1, you will note that the constraints defined for many of the attributes mirror the table column specifications.  For example, the maximum number of characters in the NationaIDNumber, LoginID and Title attributes is equivalent to the maximum width of the target column, and the size of the MaritalStatus and Gender attributes is limited to a single character as required by the table column definition.  If your application code leads to a violation of these constraints, an error will be raised.  The expressor design paradigm then allows you to handle the error in a way suitable for your application.  For example, a string value could be truncated or a numeric value could be rounded. Moreover, you have the option of specifying additional constraints that support business rules unrelated to the table definition. Let’s assume that the only acceptable values for marital status are S, M, and D.  Within the schema editor, double-click on the MaritalStatus attribute to open the Edit Attribute window.  Then click the Allowed Values checkbox and enter the acceptable values into the Constraint Value text box. The schema editor is updated accordingly. There is one more option that the expressor semantic type paradigm supports.  Since the MaritalStatus attribute now clearly specifies how this type of information should be represented (a single character limited to S, M or D), you can convert this attribute definition into a shared type, which will allow you to quickly incorporate this definition into another composite type or into the description of an output record from a transform operator. Again, double-click on the MaritalStatus attribute and in the Edit Attribute window, click Convert, which opens the Share Local Semantic Type window that you use to name this shared type.  There’s no requirement that you give the shared type the same name as the attribute from which it was derived.  You should supply a name that makes it obvious what the shared type represents. In this posting, I’ve overviewed the expressor semantic type paradigm and shown how it can be used to make your application development process more productive.  The beauty of this feature is that you choose when and to what extent you utilize the functionality, but I’m certain that if you opt to follow this approach your efforts will become more efficient and your work will progress more quickly.  As always, I encourage you to download and evaluate expressor Studio for your current and future data integration needs. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: CodeProject, Pinal Dave, PostADay, SQL, SQL Authority, SQL Documentation, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• Five Ways Enterprise 2.0 Can Transform Your Business - Q&A from the Webcast

  - by [email protected]

  A few weeks ago, Vince Casarez and I presented with KMWorld on the Five Ways Enterprise 2.0 Can Transform Your Business. It was an enjoyable, interactive webcast in which Vince and I discussed the ways Enterprise 2.0 can transform your business and more importantly, highlighted key customer examples of how to do so. If you missed the webcast, you can catch a replay here. We had a lot of audience participation in some of the polls we conducted and in the Q&A session. We weren't able to address all of the questions during the broadcast, so we attempted to answer them here: Q: Which area within your firm focuses on Web 2.0? Meaning, do you find new departments developing just to manage the web 2.0 (Twitter, Facebook, etc.) user experience or are you structuring current departments? A: There are three distinct efforts within Oracle. The first is around delivery of these Web 2.0 services for enterprise deployments. This is the focus of the WebCenter team. The second effort is injecting these Web 2.0 services into use cases that drive the different enterprise applications. This effort is focused on how to manage these external services and bring them into a cohesive flow for marketing programs, customer care, and purchasing. The third effort is how we consume these services internally to enhance Oracle's business delivery. It leverages the technologies and use cases of the first two but also pushes the envelope with regards to future directions of these other two areas. Q: In a business, Web 2.0 is mostly like action logs. How can we leverage the official process practice versus the logs of a recent action? Example: a system configuration modified last night on a call out versus the official practice that everybody would use in the morning.A: The key thing to remember is that most Web 2.0 actions / activity streams today are based on collaboration and communication type actions. At least with public social sites like Facebook and Twitter. What we're delivering as part of the WebCenter Suite are not just these types of activities but also enterprise application activities. These enterprise application activities come from different application modules: purchasing, HR, order entry, sales opportunity, etc. The actions within these systems are normally tied to a business object or process: purchase order/customer, employee or department, customer and supplier, customer and product, respectively. Therefore, the activities or "logs" as you name them are able to be "typed" so that as a viewer, you can filter or decide to see only certain types of information. In your example, you could have a view that only showed you recent "configuration" changes and this could be right next to a view that showed off the items to be watched every morning. Q: It's great to hear about customers using the software but is there any plan for future webinars to show what the products/installs look like? That would be very helpful.A: We don't have a webinar planned to show off the install process. However, we have a viewlet that's posted on Oracle Technology Network. You can see it here:http://www.oracle.com/technetwork/testcontent/wcs-install-098014.htmlAnd we've got excellent documentation that walks you through the steps here:http://download.oracle.com/docs/cd/E14571_01/install.1111/e12001/install.htmAnd there's a whole set of demos and examples of what WebCenter can do at this URL:http://www.oracle.com/technetwork/middleware/webcenter/release11-demos-097468.html Q: How do you anticipate managing metadata across the enterprise to make content findable?A: We need to first make sure we are all talking about the same thing when we use a word like "metadata". Here's why...  For a developer, metadata means information that describes key elements of the portal or application and what the portal or application can do. For content systems, metadata means key terms that provide a taxonomy or folksonomy about the information that is being indexed, ordered, and managed. For business intelligence systems, metadata means key terms that provide labels to groups of data that most non-mathematicians need to understand. And for SOA, metadata means labels for parts of the processes that business owners should understand that connect development terminology. There are also additional requirements for metadata to be available to the team building these new solutions as well as requirements to make this metadata available to the running system. These requirements are often separated by "design time" and "run time" respectively. So clearly, a general goal of managing metadata across the enterprise is very challenging. We've invested a huge amount of resources around Oracle Metadata Services (MDS) to be able to provide a more generic system for all of these elements. No other vendor has anything like this technology foundation in their products. This provides a huge benefit to our customers as they will now be able to find content, processes, people, and information from a common set of search interfaces with consistent enterprise wide results. Q: Can you give your definition of terms as to document and content, please?A: Content applies to a broad category of information from Word documents, presentations and reports through attachments to invoices and/or purchase orders. Content is essentially any type of digital asset including images, video, and voice. A document is just one type of content. Q: Do you have special integration tools to realize an interaction between UCM and WebCenter Spaces/Services?A: Yes, we've dedicated a whole team of engineers to exploit the key features of Oracle UCM within WebCenter.  While ensuring that WebCenter can connect to other non-Oracle systems, we've made sure that with the combined set of Oracle technology, no other solution can match the combined power and integration.  This is part of the Oracle Fusion Middleware strategy which is to provide best in class capabilities for Content and Portals.  When combined together, the synergy between the two products enables users to quickly add capabilities when they are needed.  For example, simple document sharing is part of the combined product offering, but if legal discovery or archiving is required, Oracle UCM product includes these capabilities that can be quickly added.  There's no need to move content around or add another system to support this, it's just a feature that gets turned on within Oracle UCM. Q: All customers have some interaction with their applications and have many older versions, how do you see some of these new Enterprise 2.0 capabilities adding value to existing enterprise application deployments?A: Just as Service Oriented Architectures allowed for connecting the processes of different applications systems to work together, there's a need for a similar approach with regards to these enterprise 2.0 capabilities. Oracle WebCenter is built on a core architecture that allows for SOA of these Enterprise 2.0 services so that one set of scalable services can be used and integrated directly into any type of application. In this way, users can get immediate value out of the Enterprise 2.0 capabilities without having to wait for the next major release or upgrade. These centrally managed WebCenter services expose a set of standard interfaces that make it extremely easy to add them into existing applications no matter what technology the application has been implemented. Q: We've heard about Oracle Next Generation applications called "Fusion Applications", can you tell me how all this works together?A: Oracle WebCenter powers the core collaboration and social computing services found within Fusion Applications. It is the core user experience technology for how all the application screens have been implemented. And the core concept of task flows allows for all the Fusion Applications modules to be adaptable and composable by business users and IT without needing to be a professional developer. Oracle WebCenter is at the heart of the new Fusion Applications. In addition, the same patterns and technologies are now being added to the existing applications including JD Edwards, Siebel, Peoplesoft, and eBusiness Suite. The core technology enables all these customers to have a much smoother upgrade path to Fusion Applications. They get immediate benefits of injecting new user interactions into their existing applications without having to completely move to Fusion Applications. And then when the time comes, their users will already be well versed in how the new capabilities work. Q: Does any of this work with non Oracle software? Other databases? Other application servers? etc.A: We have made sure that Oracle WebCenter delivers the broadest set of development choices so that no matter what technology you developers are using, WebCenter capabilities can be quickly and easily added to the site or application. In addition, we have certified Oracle WebCenter to run against non-Oracle databases like DB2 and SQLServer. We have stated plans for certification against MySQL as well. Later in CY 2011, Oracle will provide certification on non-Oracle application servers such as WebSphere and JBoss. Q: How do we balance User and IT requirements in regards to Enterprise 2.0 technologies?A: Wrong decisions are often made because employee knowledge is not tapped efficiently and opportunities to innovate are often missed because the right people do not work together. Collaboration amongst workers in the right business context is critical for success. While standalone Enterprise 2.0 technologies can improve collaboration for collaboration's sake, using social collaboration tools in the context of business applications and processes will improve business responsiveness and lead companies to a more competitive position. As these systems become more mission critical it is essential that they maintain the highest level of performance and availability while scaling to support larger communities. Q: What are the ways in which Enterprise 2.0 can improve business responsiveness?A: With a wide range of Enterprise 2.0 tools in the marketplace, CIOs need to deploy solutions that will meet the requirements from users as well as address the requirements from IT. Workers want a next-generation user experience that is personalized and aggregates their daily tools and tasks, while IT needs to ensure the solution is secure, scalable, flexible, reliable and easily integrated with existing systems. An open and integrated approach to deploying portals, content management, and collaboration can enhance your business by addressing both the needs of knowledge workers for better information and the IT mandate to conserve resources by simplifying, consolidating and centralizing infrastructure and administration.  

  Read the article

• xml file save/read error (making a highscore system for XNA game)

  - by Eddy

  i get an error after i write player name to the file for second or third time (An unhandled exception of type 'System.InvalidOperationException' occurred in System.Xml.dll Additional information: There is an error in XML document (18, 17).) (in highscores load method In data = (HighScoreData)serializer.Deserialize(stream); it stops) the problem is that some how it adds additional "" at the end of my .dat file could anyone tell me how to fix this? the file before save looks: <?xml version="1.0"?> <HighScoreData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <PlayerName> <string>neil</string> <string>shawn</string> <string>mark</string> <string>cindy</string> <string>sam</string> </PlayerName> <Score> <int>200</int> <int>180</int> <int>150</int> <int>100</int> <int>50</int> </Score> <Count>5</Count> </HighScoreData> the file after save looks: <?xml version="1.0"?> <HighScoreData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <PlayerName> <string>Nick</string> <string>Nick</string> <string>neil</string> <string>shawn</string> <string>mark</string> </PlayerName> <Score> <int>210</int> <int>210</int> <int>200</int> <int>180</int> <int>150</int> </Score> <Count>5</Count> </HighScoreData>> the part of my code that does all of save load to xml is: DECLARATIONS PART [Serializable] public struct HighScoreData { public string[] PlayerName; public int[] Score; public int Count; public HighScoreData(int count) { PlayerName = new string[count]; Score = new int[count]; Count = count; } } IAsyncResult result = null; bool inputName; HighScoreData data; int Score = 0; public string NAME; public string HighScoresFilename = "highscores.dat"; Game1 constructor public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; Width = graphics.PreferredBackBufferWidth = 960; Height = graphics.PreferredBackBufferHeight =640; GamerServicesComponent GSC = new GamerServicesComponent(this); Components.Add(GSC); } Inicialize function (end of it) protected override void Initialize() { //other game code base.Initialize(); string fullpath =Path.Combine(HighScoresFilename); if (!File.Exists(fullpath)) { //If the file doesn't exist, make a fake one... // Create the data to save data = new HighScoreData(5); data.PlayerName[0] = "neil"; data.Score[0] = 200; data.PlayerName[1] = "shawn"; data.Score[1] = 180; data.PlayerName[2] = "mark"; data.Score[2] = 150; data.PlayerName[3] = "cindy"; data.Score[3] = 100; data.PlayerName[4] = "sam"; data.Score[4] = 50; SaveHighScores(data, HighScoresFilename); } } all methods for loading saving and output public static void SaveHighScores(HighScoreData data, string filename) { // Get the path of the save game string fullpath = Path.Combine("highscores.dat"); // Open the file, creating it if necessary FileStream stream = File.Open(fullpath, FileMode.OpenOrCreate); try { // Convert the object to XML data and put it in the stream XmlSerializer serializer = new XmlSerializer(typeof(HighScoreData)); serializer.Serialize(stream, data); } finally { // Close the file stream.Close(); } } /* Load highscores */ public static HighScoreData LoadHighScores(string filename) { HighScoreData data; // Get the path of the save game string fullpath = Path.Combine("highscores.dat"); // Open the file FileStream stream = File.Open(fullpath, FileMode.OpenOrCreate, FileAccess.Read); try { // Read the data from the file XmlSerializer serializer = new XmlSerializer(typeof(HighScoreData)); data = (HighScoreData)serializer.Deserialize(stream);//this is the line // where program gives an error } finally { // Close the file stream.Close(); } return (data); } /* Save player highscore when game ends */ private void SaveHighScore() { // Create the data to saved HighScoreData data = LoadHighScores(HighScoresFilename); int scoreIndex = -1; for (int i = 0; i < data.Count ; i++) { if (Score > data.Score[i]) { scoreIndex = i; break; } } if (scoreIndex > -1) { //New high score found ... do swaps for (int i = data.Count - 1; i > scoreIndex; i--) { data.PlayerName[i] = data.PlayerName[i - 1]; data.Score[i] = data.Score[i - 1]; } data.PlayerName[scoreIndex] = NAME; //Retrieve User Name Here data.Score[scoreIndex] = Score; // Retrieve score here SaveHighScores(data, HighScoresFilename); } } /* Iterate through data if highscore is called and make the string to be saved*/ public string makeHighScoreString() { // Create the data to save HighScoreData data2 = LoadHighScores(HighScoresFilename); // Create scoreBoardString string scoreBoardString = "Highscores:\n\n"; for (int i = 0; i<5;i++) { scoreBoardString = scoreBoardString + data2.PlayerName[i] + "-" + data2.Score[i] + "\n"; } return scoreBoardString; } when ill make this work i will start this code when i call game over (now i start it when i press some buttons, so i could test it faster) public void InputYourName() { if (result == null && !Guide.IsVisible) { string title = "Name"; string description = "Write your name in order to save your Score"; string defaultText = "Nick"; PlayerIndex playerIndex = new PlayerIndex(); result= Guide.BeginShowKeyboardInput(playerIndex, title, description, defaultText, null, null); // NAME = result.ToString(); } if (result != null && result.IsCompleted) { NAME = Guide.EndShowKeyboardInput(result); result = null; inputName = false; SaveHighScore(); } } this where i call output to the screen (ill call this in highscores meniu section when i am done with debugging) spriteBatch.DrawString(Font1, "" + makeHighScoreString(),new Vector2(500,200), Color.White); }

  Read the article

< Previous Page | 639 640 641 642 643 644 645 646 647 648 649 650  | Next Page >