Search Results

Search found 20931 results on 838 pages for 'mysql insert'.

Page 649/838 | < Previous Page | 645 646 647 648 649 650 651 652 653 654 655 656  | Next Page >

  • Isolating test data in acceptance tests

    - by Matt Phillips
    I'm looking for guidance on how to keep my acceptance tests isolated. Right now the issue I'm having with being able to run the tests in parallel is the database records that are manipulated in the tests. I've written helpers that take care of doing inserts and deletes before tests are executed, to make sure the state is correct. But now I can't run them in parallel against the same database without uniquely generating the test data fields for each test. For example. Testing creating a row i'll delete everything where column A = foo and column B = bar Then I'll navigate through the UI in the test and create a record with column A = foo and column B = bar. Testing that a duplicate row is not allowed to be created. I'll insert a row with column A = foo and column B = bar and then use the UI to try and do the exact same thing. This will display an error message in the UI as expected. These tests work perfectly when ran separately and serially. But I can't run them at the same time for fear that one will create or delete a record the other is expecting. Any tips on how to structure them better so they can be run in parallel?

    Read the article

  • Plugged in Not Charging.

    - by Eric Johnson
    Suggested steps to fix the nasty Windows power management issue of plugged in not charging. Option 1: Disconnect AC Shutdown Remove battery Connect AC Startup Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1). Shutdown Disconnect AC Insert battery Connect AC Startup Option 2: Turn off laptop. Unplug AC power. Remove battery. Replace AC power. Turn on laptop, allow OS to boot. Once logged in to the machine, perform a normal shut down. Unplug AC power. Replace battery. Replace AC power. Turn on laptop, allow OS to boot. The battery should once again be charging as normal Additional troubleshooting techniques: Check battery charging status in the BIOS Update BIOS Replace Battery (I did this and the new battery is not charging) See if the battery charging light works when the laptop is powered down. Supporting Links: http://jeffreypalermo.com/blog/plugged-in-not-charging-windows-7-solution/ http://social.technet.microsoft.com/Forums/en/itprovistahardware/thread/741398c6-a733-482c-a33c-2b61d9bc2984 http://www.youtube.com/watch?v=6Xf-ipP0wSY&feature=fvw

    Read the article

  • CodePlex Daily Summary for Friday, June 07, 2013

    CodePlex Daily Summary for Friday, June 07, 2013Popular ReleasesASP.NET MVC Forum: MVCForum v1.3.5: This is a bug release version, with a couple of small usability features and UI changes. All the small amount of bugs reported in v1.3 have been fixed, no upgrade needed just overwrite the files and everything should just work.Json.NET: Json.NET 5.0 Release 6: New feature - Added serialized/deserialized JSON to verbose tracing New feature - Added support for using type name handling with ISerializable content Fix - Fixed not using default serializer settings with primitive values and JToken.ToObject Fix - Fixed error writing BigIntegers with JsonWriter.WriteToken Fix - Fixed serializing and deserializing flag enums with EnumMember attribute Fix - Fixed error deserializing interfaces with a valid type converter Fix - Fixed error deser...Christoc's DotNetNuke Module Development Template: DotNetNuke 7 Project Templates V2.3 for VS2012: V2.3 - Release Date 6/5/2013 Items addressed in this 2.3 release Fixed bad namespace for BusinessController in one of the C# templates. Updated documentation in all templates. Setting up your DotNetNuke Module Development Environment Installing Christoc's DotNetNuke Module Development Templates Customizing the latest DotNetNuke Module Development Project TemplatesPulse: Pulse 0.6.7.0: A number of small bug fixes to stabilize the previous Beta. Sorry about the never ending "New Version" bug!ZXMAK2: Version 2.7.5.3: - debugger: add LPC indicator (last executed opcode pc) - add host joystick support (written by Eltaron) - change file extension for CMOS PENTEVO to "cmos" - add hardware value monitor (see Memory Map for PENTEVO/ATM/PROFI)QlikView Extension - Animated Scatter Chart: Animated Scatter Chart - v1.0: Version 1.0 including Source Code qar File Example QlikView application Tested With: Browser Firefox 20 (x64) Google Chrome 27 (x64) Internet Explorer 9 QlikView QlikView Desktop 11 - SR2 (x64) QlikView Desktop 11.2 - SR1 (x64) QlikView Ajax Client 11.2 - SR2 (based on x64)BarbaTunnel: BarbaTunnel 7.2: Warning: HTTP Tunnel is not compatible with version 6.x and prior, HTTP packet format has been changed. Check Version History for more information about this release.SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.8: This release includes these changes below: Upgrade SuperSocket to 1.5.3 which is much more stable Added handshake request validating api (WebSocketServer.ValidateHandshake(TWebSocketSession session, string origin)) Fixed a bug that the m_Filters in the SubCommandBase can be null if the command's method LoadSubCommandFilters(IEnumerable<SubCommandFilterAttribute> globalFilters) is not invoked Fixed the compatibility issue on Origin getting in the different version protocols Marked ISub...BlackJumboDog: Ver5.9.0: 2013.06.04 Ver5.9.0 (1) ?????????????????????????????????($Remote.ini Tmp.ini) (2) ThreadBaseTest?? (3) ????POP3??????SMTP???????????????? (4) Web???????、?????????URL??????????????? (5) Ftp???????、LIST?????????????? (6) ?????????????????????Media Companion: Media Companion MC3.569b: New* Movies - Autoscrape/Batch Rescrape extra fanart and or extra thumbs. * Movies - Alternative editor can add manually actors. * TV - Batch Rescraper, AutoScrape extrafanart, if option enabled. Fixed* Movies - Slow performance switching to movie tab by adding option 'Disable "Not Matching Rename Pattern"' to Movie Preferences - General. * Movies - Fixed only actors with images were scraped and added to nfo * Movies - Fixed filter reset if selected tab was above Home Movies. * Updated Medi...Nearforums - ASP.NET MVC forum engine: Nearforums v9.0: Version 9.0 of Nearforums with great new features for users and developers: SQL Azure support Admin UI for Forum Categories Avoid html validation for certain roles Improve profile picture moderation and support Warn, suspend, and ban users Web administration of site settings Extensions support Visit the Roadmap for more details. Webdeploy package sha1 checksum: 9.0.0.0: e687ee0438cd2b1df1d3e95ecb9d66e7c538293b Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.93: Added -esc:BOOL switch (CodeSettings.AlwaysEscapeNonAscii property) to always force non-ASCII character (ch > 0x7f) to be escaped as the JavaScript \uXXXX sequence. This switch should be used if creating a Symbol Map and outputting the result to the a text encoding other than UTF-8 or UTF-16 (ASCII, for instance). Fixed a bug where a complex comma operation is the operand of a return statement, and it was looking at the wrong variable for possible optimization of = to just .VG-Ripper & PG-Ripper: VG-Ripper 2.9.42: changes NEW: Added Support for "GatASexyCity.com" links NEW: Added Support for "ImgCloud.co" links NEW: Added Support for "ImGirl.info" links NEW: Added Support for "SexyImg.com" links FIXED: "ImageBam.com" linksDocument.Editor: 2013.22: What's new for Document.Editor 2013.22: Improved Bullet List support Improved Number List support Minor Bug Fix's, improvements and speed upsCarrotCake, an ASP.Net WebForms CMS: Binaries and PDFs - Zip Archive (v. 4.3 20130528): Features include a content management system and a robust featured blogging engine. This includes configurable date based blog post URLs, blog post content association with categories and tags, assignment/customization of category and tag URL patterns, simple blog post feedback collection and review, blog post pagination/indexes, designation of default blog page (required to make search, category links, or tag links function), URL date formatting patterns, RSS feed support for posts and pages...PHPExcel: PHPExcel 1.7.9: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated.Droid Explorer: Droid Explorer 0.8.8.10 Beta: Fixed issue with some people having a folder called "android-4.2.2" in their build-tools path. - 16223 Magick.NET: Magick.NET 6.8.5.402: Magick.NET compiled against ImageMagick 6.8.5.4. These zip files are also available as a NuGet package: https://nuget.org/profiles/dlemstra/patterns & practices: Data Access Guidance: Data Access Guidance Drop3 2013.05.31: Drop 3DotNet.Highcharts: DotNet.Highcharts 2.0 with Examples: DotNet.Highcharts 2.0 Tested and adapted to the latest version of Highcharts 3.0.1 Added new chart types: Arearange, Areasplinerange, Columnrange, Gauge, Boxplot, Waterfall, Funnel and Bubble Added new type PercentageOrPixel which represents value of number or number with percentage. Used for sizes, width, height, length, etc. Removed inheritances in YAxis option classes. Closed issues: 682: Missing property - XAxisPlotLinesLabel.Text 688: backgroundColor and plotBackgroundColor are...New ProjectsAccountingTest: just to learn asp.net mvc 3 Agile Poker Cards for Windows Mobile: During a scrum or other agile processes, you have to estimate the size of a user story during a planning session. With the Agile Poker Cards program there is no need for using real cards anymore!Buildinator: Buildinator generates TFS Build definitions from an XML file, enabling canonical "templates" that make it easy to add or copy build definitions.Clipboard Capture Plugin: Captures an image in the clipboard and gives you more options to insert the image into Live WriterComercial HS: Commercial hsCommonExtranet: CommonExtranet is a basis for an Extranet web site with a user authentication mechanism that incorporates password aging and various features expected on a domain LogOnDataVeryLite: DataVeryLite is a lightweight *Persistence Framework*. DataVeryLite???????*?????*. ??????Nhibernate?????,??Linq to sql???????,?????DataVeryLite.daydayup: snd\realdamon_cpDNN Extension Url Providers: The DNN Extension Url Providers project contains installable extensions for extending DNN URL functionality.DotNetNuke Kitchen Sink: A sample module project for DotNetNuke with a variety of different scenarios covered.Football Team Management: Manage team, player, match and staffFreePiano: Play piano using your computer keyboard.GIF animator: Dev in progessI'm Feeling Lucky Plugin: Lets you put a link in that acts as though doing an I'm Feeling Lucky search.Insert Video Jnr: This is a baby version of my Video plugin, it is intended for Hosted Wordpress blogs only and shouldn't be used with other blog providers.jabbrmercurial: 22Kax.WebControls.RadioButtonList: Web Custom Control that extend RadioButtonList to allow uncheckable state.Kinect Screen Aware: Kinect Screen Aware uses a Kinect to detect touch, hover, gestures, and voice on a standard television display. It's designed to be low cost and easy to setuplppbop: Aplikasi Laporan Bantuan Operasional PendidikanmobiSms: mobismsnga: National Geography of AzerothRadminPassword: ????????? ??? ??????????????? ????? ??????? ? ????????? ????????? ?????????? ?????????? ?? Radmin. A program to automatically enter the passwords in the famous PC remote control software Radmin.Rx Heat: Rx Heat is a library of helper classes that complements the Reactive Extensions Library with additional features. Schema Generator: The basic idea behind this utility is to emit the database schema from an existing SQL Server database. From a developer perspective, it is sometimes very much handy to quickly take a printout of the database structure for creating the UI layout.SharePoint Packager: Perform the instalation, upgrade and retraction of Ms Sharepoint Applications fast, easy and efficientsmartTouch: :-)SpotifyLync: A small tray application that reports your Spotify status to your Microsoft Lync client. Alos contains additional Spotify / Lync features.Syngine: A simple to use game framework using MonoGame and Farseer Physicstest060601CM: testtestMC053003: testToSic.Eav: A powerfull EAV (Entity-Attribute-Value) system created by 2sic Internet Solutions in Switzerland. It's currently mainly used inside 2SexyContent for DotNetNukeTraceLight: <project name> TraceLight ray tracer </project name> <programming language> C# </programming language>trakr: minimalist webtracking software written in python and twistedTwitterXML: A .NET wrapper library for the Twitter REST API. Currently, all of the methods return an XMLDocument. Also included are classes for Users, Statuses, and Direct Messages that use XML serialization for converting the XML responses to objects with a Deserialize() call.Universal Parking Centre: Universal Parking Centre is a website-based software developed by Center Code to help you in organizing your parking business.Velocity OS: Be fast, Be strong. It's Velocity.WinKeGen Code Samples: This project will allow beginning developers a close look at some code samples and variations of how to use those samples in their own code.WinRT Synth lib: Project Description this project aims to provide an easy-to-use API, for sound synthesis under winrt, in c#. It use the XAudio2 api for the playback of the sounWpfCollaborative3D: WpfCollaborative3DX-Parking: Our online parking sites , try at : x-parking.pemrogramaninternet.infoYnote Plugins: Ynote Classic Plugins which help in transforming Ynote Classic into a powerful HTML / XML Editor or an IDE.

    Read the article

  • 50% off ASP.NET hosting

    - by Fabrice Marguerie
    I haven't blogged for a long time because I'm busy working on an exciting new project. It's too early to tell you more. I'll provide details in a few months. Meanwhile, I wanted to write a quick post to share an excellent offer with you. It's that time of the year when you can get deals on many things, including web hosting. I'd like to remind you about Arvixe, a great web hosting provider for Windows (for ASP.NET) and Linux. For 48 hours, between Thursday November 24th at 00:00 PST (08:00 GMT/UTC) and Friday November 25th, Arvixe will be offering 50% off all of their shared hosting products. This will be for all new accounts, for life (as long as you continue to renew the account)!I've been using Arvixe for my websites for more than one year and a half now, and I highly recommend them. Here is an overview of what I get for a very good price:Unlimited diskspaceUnlimited data transferUnlimited domainsUnlimited POP3 and IMAP mailboxesUnlimited SQL Server 2008 databasesUnlimited MySQL databases.NET 1.1, 2, 3.5 and 4Dedicated application poolsFull trustIIS 7Daily backupsand more... And now, you can get that too for half the price. Just go to Arvixe.com and secure your own hosting account now by using the coupon code "Black Friday" during checkout.Disclaimer: the links to Arvixe are affiliate links that may bring me some money home if you sign up. Still, I recommend Arvixe because I use them and I'm very happy with what they offer.

    Read the article

  • How do I install a Wimax usb driver?

    - by kakaz
    I am using wimax usb modem in Ubuntu 9.04 properly. I am familiar with Ubuntu 10.04 and try to install the same deb file to use my wimax USB modem, but it could not install and give me the following error message: $ sudo dpkg -i green-packet-wimax-usb_i386.iso.deb (Reading database ... 206628 files and directories currently installed.) Preparing to replace green-packet-wimax-usb 1.12 (using green-packet-wimax- usb_i386.iso.deb) ... /var/lib/dpkg/info/green-packet-wimax-usb.prerm: 45: /etc/init.d/wimaxd: not found Removing any system startup links for /etc/init.d/wimaxd ... FATAL: Module mt7118_usb_os not found. Unpacking replacement green-packet-wimax-usb ... Setting up green-packet-wimax-usb (1.12) ... FATAL: Error inserting mt7118_usb_glue (/lib/modules/2.6.32-28-generic/kernel/drivers/net/mt7118_usb_glue.ko): Invalid module format dpkg: error processing green-packet-wimax-usb (--install): subprocess installed post-installation script returned error exit status 1 Processing triggers for ureadahead ... Processing triggers for desktop-file-utils ... Processing triggers for python-gmenu ... Rebuilding /usr/share/applications/desktop.en_US.utf8.cache... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Processing triggers for python-support ... Errors were encountered while processing: The error (Line 9) give me some clue that the mt7118_usb_glue.ko kernel object can't insert it. So, I think this may be due to it's kernel dependencies. Can anybody tell me how I can install this kernel object to my new Ubuntu 10.04 kernel?

    Read the article

  • How to recover bad encripted directory

    - by Fato Alessandro
    I had a problem while formatting Ubuntu. I tried to reinstall without formatting the home directory and with the same username. The home directory of the new installation was set to be encrypted. Then the installation went wrong because of the cd. So it really never started (stopped at coping stage). How ever Ubuntu did encrypted the home directory but probably the procedure went wrong. By now I installed Ubuntu in another partition, tried to mount with encrypted-recovery but the mounted directory in tmp wasn't the directory I had before. There were just strange directories with coded name. Strange fact is that the file system is not damaged: it continues to know how much data is actually stored in it. If I look with gparted or even nautilus I see 45 Gb of data present on the partition. This let me think that my data are not erased but maybe hidden. Moreover when I tried to mount the encrypted home directory with encrypted-recovery-personal it asked me the encryption secret. I insert nothing, just pressed enter, and the password was accepted. Is thre a method for removing my data? Maybe trying to rencrypt the directory? How could I get back to the previous documents. Thanks to everyone

    Read the article

  • Not booting from USB or CD (SYSLINUX Message)

    - by Raymond
    I am trying to install linux on my laptop, a Toshiba Satellite C6550-S5200. I did it once but something happened so I removed it then I had to destroy all data on hard drive so now I have nothing on it. Well I got a iso file burned to a CD and to a flash drive. With the flash drive I get. SYSLINUX 4.06 EDD 4.06-pre7 Copyright (C) 1994-2012 H. Peter Anvin et al With the CD it will start booting it but somewhere loading it up, the dots turn all orange and stay that way and my CD drive turns quiet. Oh and some more info the images work because I tried loading them up on another pc and it worked just fine. I manage to get the CD to boot I just had to let me pc boot up first then insert the CD and have it boot the CD then. Once I get done installing ubuntu it works fine but I have to leave the PC on 24/7 for if I turn it off the PC will freeze 5-10 seconds after booting back up no matter how I install it.

    Read the article

  • PHP file_put_contents File Locking

    - by hozza
    The Senario: You have a file with a string (average sentence worth) on each line. For arguments sake lets say this file is 1Mb in size (thousands of lines). You have a script that reads the file, changes some of the strings within the document (not just appending but also removing and modifying some lines) and then overwrites all the data with the new data. The Questions: Does 'the server' PHP, OS or httpd etc. already have systems in place to stop issues like this (reading/writing half way through a write)? i. If it does, please explain how it works and give examples or links to relevant documentation. ii. If not, are there things I can enable or set-up, such as locking a file until a write is completed and making all other reads and/or writes fail until the previous script has finished writing? My Assumptions and Other Information: The server in question is running PHP and Apache or Lighttpd. If the script is called by one user and is halfway through writing to the file and another user reads the file at that exact moment. The user who reads it will not get the full document, as it hasn't been written yet. (If this assumption is wrong please correct me) I'm only concerned with PHP writing and reading to a text file, and in particular, the functions "fopen"/"fwrite" and mainly "file_put_contents". I have looked at the "file_put_contents" documentation but have not found the level of detail or a good explanation of what the "LOCK_EX" flag is or does. The senario is an EXAMPLE of a worst case senario where I would assume these issues are more likely to occur, due to the large size of the file and the way the data is edited. I want to learn more about these issues and don't want or need answers or comments such as "use mysql" or "why are you doing that" because I'm not doing that, I just want to learn about file read/writing with PHP and don't seem to be looking in the right places/documentation and yes I understand PHP is not the perfect language for working with files in this way...

    Read the article

  • Spring to Java EE, Part Three - new tech article on otn/java

    - by Janice J. Heiss
    In a new article up on otn/java, Java EE expert David Heffelfinger continues his series exploring the relative strengths and weaknesses of Java EE and Spring. Here, he demonstrates how easy it is to develop the data layer of an application using Java EE, JPA, and the NetBeans IDE instead of the Spring Framework.In the first two parts of the series, he generated a complete Java EE application by using JavaServer Faces (JSF) 2.0, Enterprise JavaBeans (EJB) 3.1, and Java Persistence API (JPA) 2.0 from Spring’s Pet Clinic MySQL schema, thus showing how easy it is to develop an application whose functionality equaled that of the Spring sample application.In his new article, Heffelfinger tweaks the application to make it more user friendly.From the article:“The generated application displays primary keys on some of the pages, and these keys are surrogate primary keys—meaning that they have no business value and are used strictly as a unique identifier—so there is no reason why they should be visible to the user. In addition, we will modify some of the generated labels to make them more user-friendly.”He concludes the article with a summary:“The Java EE version of the application is not a straight port of the Spring version. For example, the Java EE version enables us to create, update, and delete veterinarians as well as veterinary specialties, whereas the Spring version of the application enables us only to view veterinarians and specialties. Additionally, the Spring version has a single page for managing/viewing owners, pets, and visits, whereas the Java EE version of the application has separate pages for each of these entities.The other thing we should keep in mind is that we didn’t actually write a lot of the code and markup for the Java EE version of the application, because the bulk of it was generated by the NetBeans wizard.” Have a look at the complete article here.

    Read the article

  • Finding a way to simplify complex queries on legacy application

    - by glenatron
    I am working with an existing application built on Rails 3.1/MySql with much of the work taking place in a JavaScript interface, although the actual platforms are not tremendously relevant here, except in that they give context. The application is powerful, handles a reasonable amount of data and works well. As the number of customers using it and the complexity of the projects they create increases, however, we are starting to run into a few performance problems. As far as I can tell, the source of these problems is that the data represents a tree and it is very hard for ActiveRecord to deterministically know what data it should be retrieving. My model has many relationships like this: Project has_many Nodes has_many GlobalConditions Node has_one Parent has_many Nodes has_many WeightingFactors through NodeFactors has_many Tags through NodeTags GlobalCondition has_many Nodes ( referenced by Id, rather than replicating tree ) WeightingFactor has_many Nodes through NodeFactors Tag has_many Nodes through NodeTags The whole system has something in the region of thirty types which optionally hang off one or many nodes in the tree. My question is: What can I do to retrieve and construct this data faster? Having worked a lot with .Net, if I was in a similar situation there, I would look at building up a Stored Procedure to pull everything out of the database in one go but I would prefer to keep my logic in the application and from what I can tell it would be hard to take the queried data and build ActiveRecord objects from it without losing their integrity, which would cause more problems than it solves. It has also occurred to me that I could bunch the data up and send some of it across asynchronously, which would not improve performance but would improve the user perception of performance. However if sections of the data appeared after page load that could also be quite confusing. I am wondering whether it would be a useful strategy to make everything aware of it's parent project, so that one could pull all the records for that project and then build up the relationships later, but given the ubiquity of complex trees in day to day programming life I wouldn't be surprised if there were some better design patterns or standard approaches to this type of situation that I am not well versed in.

    Read the article

  • Comparing Dates in Oracle Business Rule Decision Tables

    - by James Taylor
    I have been working with decision tables for some time but have never had a scenario where I need to compare dates. The use case was to check if a persons membership had expired. I didn't think much of it till I started to develop it. The first trap I feel into was trying to create ranges and bucket sets. The other trap I fell into was not converting the date field to a complete date. This may seem obvious to most people but my Google searches came up with nothing so I thought I would create a quick post. I assume everyone knows how to create a decision table so I'm not going to go through those steps. The prerequisite for this post is to have a decision table with a payload that has a date field. This filed must have the date in the following format YYYY-MM-DDThh:mm:ss. Create a new condition in your decision table Right-click on the condition to edit it and select the expression builder In the expression builder, select the Functions tab. Expand the CurrentDate file and select date, and click Insert Into Expression button. In the Expression Builder you need to create an expression that will return true or false, add the operation <= after the CurrentDate.date In my scenario my date field is memberExpire, Navigate to your date field and expand, select toGregorianCalendar(). Your expression will look something like this, click OK to get back to the decision table Now its just a matter of checking if the value is true or false. Simple when you know how :-)

    Read the article

  • Is there any site which tells or highlights by zone developer income source? I think i am getting less yearly [closed]

    - by YumYumYum
    http://www.itjobswatch.co.uk/ Thats the only one good site i have found, but missing for Belgium and for other European countries. I was searching a site which can tell the income source details for European developer (specially for Belgium). But mostly not a single website exist who tells the true. My situation: As a programmer myself in one company i use all my knowledge, 20++ hours a day (office , home, office, home) because every-time its challenge/complex/stress/over-time feature-requests, at the end of the year in Europe i was getting in total not even the lowest amount shown here (UK pound vs Euro + high-tech most of the time they use + speed in development): http://www.itjobswatch.co.uk/ In one company i have to use my best performance knowledge for whole year with: C, Java, PHP (Zend Framework, Cakephp), BASH, MySQL/DB2, Linux/Unix, Javascript, Dojo, JQuery, Css, Html, Xml. Company wants to pay lesser but always it has to be perfect and it has to be solid gold and diamond like quality. And the total amount in Europe is not sufficient for me if i compare with other countries and living cost in Europe including taxes. Is there any developers/community site where we can see by country, zone what is minimum to maximum income source getting offered to the developers? So that some developers who is in troubles, they can shout and speak up louder with those references?

    Read the article

  • Why don't %MEM values add up to mem in top?

    - by ben
    I'm currently debugging performance issues with my VPS and for that I'm trying to understand which of the processes eat the most memory. Reading top, here's what I get: Mem: 366544k total, 321396k used, 45148k free, 380k buffers Swap: 1048572k total, 592388k used, 456184k free, 7756k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 12339 ruby 20 0 844m 74m 2440 S 0 20.8 0:24.84 ruby 12363 ruby 20 0 844m 73m 1576 S 0 20.6 0:00.26 ruby 21117 ruby 20 0 171m 33m 1792 S 0 9.3 2:03.98 ruby 11846 ruby 20 0 858m 21m 1820 S 0 6.0 0:09.15 ruby 21277 ruby 20 0 219m 11m 1648 S 0 3.2 2:00.98 ruby 792 root 20 0 266m 10m 1024 S 0 3.0 1:40.06 ruby 532 mysql 20 0 234m 4760 1040 S 0 1.3 0:41.58 mysqld 793 root 20 0 250m 4616 984 S 0 1.3 1:20.55 ruby 586 root 20 0 156m 4532 848 S 0 1.2 6:17.10 god 12315 ruby 20 0 175m 2412 1900 S 0 0.7 0:07.55 ruby 3844 root 20 0 44036 2132 1028 S 0 0.6 1:08.22 ruby 10939 ruby 20 0 179m 1884 1724 S 0 0.5 0:08.33 ruby 4660 ruby 20 0 229m 1592 1440 S 0 0.4 2:55.46 ruby 3879 nobody 20 0 37428 964 520 S 0 0.3 0:01.99 nginx As you can see my memory is about 90% used (which is my issue) but when you add up the %MEM values, it goes to about 50-60% only. Same thing, RES doesn't add up to ~350mb. Why? Am I misunderstanding their meaning? Thanks

    Read the article

  • Just started a job with Scrum. Something seems to be missing. I am new to Scrum

    - by punkouter
    The code is a complete mess of a combination of classic ASP/ASP.NET. The scrum consist of us patching up the big mess or making additions to it. We are all too busy doing that to start a rewrite so I am wondering.. Where is the part in Scrum where the developers can have the power to say that enough is enough and demand that they are given time to start the big rewrite ? We seem in an endless loop of just patching old code with 'Stories'. So things are being run by the non-technical people who seem to have no desire to push for a rewrite because they don't understand how bad the code base has gotten.. So who is in charge of making this big rewrite change happen ? The devs? The scrum master? The current strategy is just find time and do it ourselves without the higher ups involved.. since they are mostly to blame for the current mess we are in.. <-insert rant about non-tech people telling tech people what to do here-

    Read the article

  • how to save and load the state of a game in scheme

    - by user3667664
    I'm creating the game of chess in scheme, but do not know how to save and load game state is a part I have this code (define-struct ficha(color se-movio? tipo-ficha )) ;;tablero lista de listas de fichas (define-struct estado (tablero turno fichaSel)) (define bpawn (bitmap "b-peon.png")) (define brook (bitmap "b-torre.png")) (define bcaballo (bitmap "b-caballo.png")) (define bbish (bitmap "b-arfil.png")) (define bquee (bitmap "b-reina.png")) (define bking (bitmap "b-rey.png")) (define wpawn (bitmap "w-peon.png")) (define wrook (bitmap "w-torre.png")) (define wcaballo (bitmap "w-caballo.png")) (define wbish (bitmap "w-arfil.png")) (define wquee (bitmap "w-reina.png")) (define wking (bitmap "w-rey.png")) (define board (bitmap "board.jpg")) This is the board that is a list of lists (define tableroini (list (list torreb caballob arfilb reinab reyb arfilb caballob torreb) (list peonb peonb peonb peonb peonb peonb peonb peonb) (list empty empty empty empty empty empty empty empty) (list empty empty empty empty empty empty empty empty) (list empty empty empty empty empty empty empty empty) (list empty empty empty empty empty empty empty empty) (list peonw peonw peonw peonw peonw peonw peonw peonw) (list torrew caballow arfilw reinaw reyw arfilw caballow torrew))) I did this to save the state of the game: (define (Guardar-en-archivo archivo) (write-file (string-append Subcarpeta archivo ".txt") "game state" )) But not as you insert the game state on "game state" for me to save the game How I can do this ?

    Read the article

  • Choosing Technology To Include In Software Design

    How many of us have been forced to select one technology over another when designing a new system? What factors do we and should we consider? How can we ensure the correct business decision is made? When faced with this type of decision it is important to gather as much information possible regarding each technology being considered as well as the project itself. Additionally, I tend to delay my decision about the technology until it is ultimately necessary to be made. The reason why I tend to delay such an important design decision is due to the fact that as the project progresses requirements and other factors can alter a decision for selecting the best technology for a project. Important factors to consider when making technology decisions: Time to Implement and Maintain Total Cost of Technology (including Implementation and maintenance) Adaptability of Technology Implementation Team’s Skill Sets Complexity of Technology (including Implementation and maintenance) orecasted Return On Investment (ROI) Forecasted Profit on Investment (POI) Of the factors to consider the ROI and POI weigh the heaviest because the take in to consideration the other factors when calculating the profitability and return on investments.For a real world example let us consider developing a web based lead management system for a new company. This system can either be hosted on Microsoft Windows based web server or on a Linux based web server. Important Factors for this Example Implementation Team’s Skill Sets Member 1  Skill Set: Classic ASP, ASP.Net, and MS SQL Server Experience: 10 years Member 2  Skill Set: PHP, MySQL, Photoshop and MS SQL Server Experience: 3 years Member 3  Skill Set: C++, VB6, ASP.Net, and MS SQL Server Experience: 12 years Total Cost of Technology (including Implementation and maintenance) Linux Initial Year: $5,000 (Random Value) Additional Years: $3,000 (Random Value) Windows Initial Year: $10,000 (Random Value) Additional Years: $3,000 (Random Value) Complexity of Technology Linux Large Learning Curve with user driven documentation Estimated learning cost: $30,000 Windows Minimal based on Teams skills with Microsoft based documentation Estimated learning cost: $5,000 ROI Linux Total Cost Initial Total Cost: $35,000 Additional Cost $3,000 per year Windows Total Cost Initial Total Cost: $15,000 Additional Cost $3,000 per year Based on the hypothetical numbers it would make more sense to select windows based web server because the initial investment of the technology is much lower initially compared to the Linux based web server.

    Read the article

  • How to Rotate different data in days of the week in php [migrated]

    - by shihon
    I am working on a project in which i have to distribute different ad's per day, the ad's in form of array are: $ad = array( 'attribute1_value' => "12", 'attribute2_value' => "xyz", 'attribute3_value' => 'http://example.com', 'attribute4_value' => 'data'); The logic i am using with switch case : $day = date('w',time()); switch ($day) { case '0': if($day == '0') { $count = 0; echo $ad; $count++; } else { $count = 7; echo $ad; } break; case '1': if($day == '1') { $count = 1; echo $ad; $count++; } else { $count = 8; echo $ad; } break; Problem is if i have ~15 ad's then i want to distribute ad/day, date('w') output's the present day but after day 7 i.e saturday, on sunday ad number 8 initiate. I have to implement this scenario using date function. Also i have to send ad's to those user who are not experience this ad before. I am not expert in php, as a beginner working in php/mysql. Kindly help me to improve this concept

    Read the article

  • Ad-hoc String Manipulation With Visual Studio

    - by Liam McLennan
    Visual studio supports relatively advanced string manipulation via the ‘Quick Replace’ dialog. Today I had a requirement to modify some html, replacing line breaks with unordered list items. For example, I need to convert: Infrastructure<br/> Energy<br/> Industrial development<br/> Urban growth<br/> Water<br/> Food security<br/> to: <li>Infrastructure</li> <li>Energy</li> <li>Industrial development</li> <li>Urban growth</li> <li>Water</li> <li>Food security</li> This cannot be done with a simple search-and-replace but it can be done using the Quick Replace regular expression support. To use regular expressions expand ‘Find Options’, check ‘Use:’ and select ‘Regular Expressions’ Typically, Visual Studio regular expressions use a different syntax to every other regular expression engine. We need to use a capturing group to grab the text of each line so that it can be included in the replacement. The syntax for a capturing group is to replace the part of the expression to be captured with { and }. So my regular expression: {.*}\<br/\> means capture all the characters before <br/>. Note that < and > have to be escaped with \. In the replacement expression we can use \1 to insert the previously captured text. If the search expression had a second capturing group then its text would be available in \2 and so on. Visual Studio’s quick replace feature can be scoped to a selection, the current document, all open documents or every document in the current solution.

    Read the article

  • Finally! Entity Framework working in fully disconnected N-tier web app

    - by oazabir
    Entity Framework was supposed to solve the problem of Linq to SQL, which requires endless hacks to make it work in n-tier world. Not only did Entity Framework solve none of the L2S problems, but also it made it even more difficult to use and hack it for n-tier scenarios. It’s somehow half way between a fully disconnected ORM and a fully connected ORM like Linq to SQL. Some useful features of Linq to SQL are gone – like automatic deferred loading. If you try to do simple select with join, insert, update, delete in a disconnected architecture, you will realize not only you need to make fundamental changes from the top layer to the very bottom layer, but also endless hacks in basic CRUD operations. I will show you in this article how I have  added custom CRUD functions on top of EF’s ObjectContext to make it finally work well in a fully disconnected N-tier web application (my open source Web 2.0 AJAX portal – Dropthings) and how I have produced a 100% unit testable fully n-tier compliant data access layerfollowing the repository pattern. http://www.codeproject.com/KB/linq/ef.aspx In .NET 4.0, most of the problems are solved, but not all. So, you should read this article even if you are coding in .NET 4.0. Moreover, there’s enough insight here to help you troubleshoot EF related problems. You might think “Why bother using EF when Linq to SQL is doing good enough for me.” Linq to SQL is not going to get any innovation from Microsoft anymore. Entity Framework is the future of persistence layer in .NET framework. All the innovations are happening in EF world only, which is frustrating. There’s a big jump on EF 4.0. So, you should plan to migrate your L2S projects to EF soon.

    Read the article

  • CheckMemoryAllocationGame Sample

    - by Michael B. McLaughlin
    Many times I’ve found myself wondering how much GC memory some operation allocates. This is primarily in the context of XNA games due to the desire to avoid generating garbage and thus triggering a GC collection. Many times I’ve written simple programs to check allocations. I did it again recently. It occurred to me that many XNA developers find themselves asking this question from time to time. So I cleaned up my sample and published it on my website. Feel free to download it and put it to use. It’s rather thoroughly commented. The location where you insert the code you wish to check is in the Update method found in Game1.cs. The default that I put in is a line of code that generates a new Guid using Guid.NewGuid (which, if you’re curious, does not create any heap allocations). Read all of the comments in the Update method (at the very least) to make sure that your code is measured properly. It’s important to make sure that you meaningfully reference any thing you create after the second call to get the memory or else (in Release configuration at least) you will likely get incorrect results. Anyway, it should make sense when you read the comments and if not, feel free to post a comment here or ask me on Twitter. You can find my utilities and code samples page here: http://www.bobtacoindustries.com/developers/utils/Default.aspx To download CheckMemoryAllocationGame’s source code directly: http://www.bobtacoindustries.com/developers/utils/CheckMemoryAllocationGame.zip (If you’re looking to do this outside of the context of an XNA game, the measurement code in the Update method can easily be adapted into, e.g., a C# Windows Console application. In the past I mostly did that, actually. But I didn’t feel like adding references to all the XNA assemblies this time and… anyway, if you want you can easily convert it to a console application. If there’s any demand for it, I’ll do it myself and update this post when I get a chance.)

    Read the article

  • From TFS to Git

    - by Saeed Neamati
    I'm a .NET developer and I've used TFS (team foundation server) as my source control software many times. Good features of TFS are: Good integration with Visual Studio (so I do almost everything visually; no console commands) Easy check-out, check-in process Easy merging and conflict resolution Easy automated builds Branching Now, I want to use Git as the backbone, repository, and source control of my open source projects. My projects are in C#, JavaScript, or PHP language with MySQL, or SQL Server databases as the storage mechanism. I just used github.com's help for this purpose and I created a profile there, and downloaded a GUI for Git. Up to this part was so easy. But I'm almost stuck at going along any further. I just want to do some simple (really simple) operations, including: Creating a project on Git and mapping it to a folder on my laptop Checking out/checking in files and folders Resolving conflicts That's all I need to do now. But it seems that the GUI is not that user friendly. I expect the GUI to have a Connect To... or something like that, and then I expect a list of projects to be shown, and when I choose one, I expect to see the list of files and folders of that project, just like exploring your TFS project in Visual Studio. Then I want to be able to right click a file and select check-in... or check-out and stuff like that. Do I expect much? What should I do to easily use Git just like TFS? What am I missing here?

    Read the article

  • Database Vault integration available

    - by Anthony Shorten
    One of the major features of Oracle Utilities Application Framework V4.1 is the provision of a base solution for integration to the Database Vault product. Database Vault is part of Oracle’s security portfolio of product and allows database user permissions to be locked down to only allow appropriate users appropriate access to the product data. By default, when you install the product database, administrators and SYSDBA users have full DML (SELECT, INSERT, UPDATE and DELETE access) to the schemas they own and in the case of the SYSDBA users, all schemas on the database. This can be perceived as an issue. Database Vault allows an additional layer of security to disable inappropriate access. In Oracle Utilities Application Framework, a prebuilt Database Vault solution has been provided to provide base DML access to product data for product users only. The solution is shipped with the database installation files and includes a set of SQL files to create, disable, enable and delete the Database Vault objects. The solution contains a Database Vault Realm, RuleSets, Rules and Command Rules that can be used as is or extended to meet site specific needs. The solution is consistent with other Database Vault solutions provided for other Oracle applications such as PeopleSoft, E-Business Suite, JD-Edwards and Siebel. Customers familiar with the database vault solutions for those products will recognize the similarities between the solutions. For more details of the solution, refer to the Database Vault Integration for Oracle Utilities Application Framework Based Products on My Oracle Support at KB Id: 1290700.1.

    Read the article

  • Finding links among many written and spoken thoughts

    - by Peter Fren
    So... I am using a digital voice recorder to record anything I see important, ranging from business to private, from rants to new business ideas. Every finalized idea is one wma-file. I wrote a program to sort the wma-files into folders. From time to time I listen to the wma-files, convert them to text(manually) and insert them into a mindmap with mindmanager, which I sort hierarchically by area and type in turn. This works very well, no idea is being lost, when I am out of ideas for a special topic, I listen to what I said and can get started again. What could a search system look like that finds links between thoughts(written in the mindmap and in the wma files) or in general gives me good search results even when the keyword I searched for is not present but a synonym of it or related topic(for instance flower should output entries containing orchid aswell, even if they contain orchid but not the very keyword flower). I prefer something ready-made but small adjustments to a given system are fine aswell. How would you approach this task?

    Read the article

  • Seeking solution for printing-reporting .NET

    - by Parhs
    I am developing an application that prints in separate threads in extreme cases about 20-25 pages per minute to various thermal printers. Currently templates for these are XAML xps documents. All printers have graphics drivers that support EMF/GDI printing. So GDI-EMF is done by operating system resulting in slower performance. Sending raw text for printing is another good solution but doesnt work always , because some clients have old chinese thermal printer that nobody support thus impossible to change codepage / emulation. So it doesnt work always. Also most computers running my software are low end ATOM CPU. So I am thinking to return to GDI, EMF printing and have both Text-Only reports and EMF reports. Another reason i want EMF is because here receipts are signed by Electronic Fiscal Memory device.Most of these dont do good job extracting text from XPS as they dont follow the standard but how windows convert GDI to XPS.Even with text-only mode some of them dont support all character encodings and are impossible to send paper cut command after the sign. I know that using a reporting engine would solve rendering problem but I dont want to buy one. All I want is to be able to show tabular data and insert an image and replaced text.I know there is StringTemplate that could do the generation of template but the problem is i should parse somehow the template and render it using GDI commands. Is there any other solution/approach for this ? Or is there anything ready ?

    Read the article

  • How to Archive, Search, and View Your Tweet Statistics with ThinkUp

    - by YatriTrivedi
    Worried about archiving your tweets? Want a more powerful search? Want to see your tweet statistics? You can do all of that and more by installing ThinkUp on your home server. ThinkUp is a brilliant application (currently in beta) that will archive all of your tweets, your replies, responses, etc. so that you can search through them and find out some helpful usage statistics. It has quite a few plugins, including one that adds full Facebook support, too. It’s designed to be installed on a LAMP server; that is, Linux, Apache, MySQL, and PHP is what will provide the backbone for it. While it’s possible to install it on a Windows- or Mac-based machine, it’s most easily handled in Linux, so we’ll be using Ubuntu to show you how to get it up and running. It’s in very active development by the founder, Gina Trapani, and by many users in the community Latest Features How-To Geek ETC How to Recover that Photo, Picture or File You Deleted Accidentally How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin The How-To Geek Video Guide to Using Windows 7 Speech Recognition How To Create Your Own Custom ASCII Art from Any Image How To Process Camera Raw Without Paying for Adobe Photoshop What is the Internet? From the Today Show January 1994 [Historical Video] Take Screenshots and Edit Them in Chrome and Iron Using Aviary Screen Capture Run Android 3.0 on a Hacked Nook Google Art Project Takes You Inside World Famous Museums Emerald Waves and Moody Skies Wallpaper Change Your MAC Address to Avoid Free Internet Restrictions

    Read the article

< Previous Page | 645 646 647 648 649 650 651 652 653 654 655 656  | Next Page >