Search Results

Search found 28744 results on 1150 pages for 'higher order functions'.

Page 65/1150 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • Python parsing error message functions

    - by user1716168
    The code below was created by me with the help of many SO veterans: The code takes an entered math expression and splits it into operators and operands for later use. I have created two functions, the parsing function that splits, and the error function. I am having problems with the error function because it won't display my error messages and I feel the function is being ignored when the code runs. An error should print if an expression such as this is entered: 3//3+4,etc. where there are two operators together, or there are more than two operators in the expression overall, but the error messages dont print. My code is below: def errors(): numExtrapolation,opExtrapolation=parse(expression) if (len(numExtrapolation) == 3) and (len(opExtrapolation) !=2): print("Bad1") if (len(numExtrapolation) ==2) and (len(opExtrapolation) !=1): print("Bad2") def parse(expression): operators= set("*/+-") opExtrapolate= [] numExtrapolate= [] buff=[] for i in expression: if i in operators: numExtrapolate.append(''.join(buff)) buff= [] opExtrapolate.append(i) opExtrapolation=opExtrapolate else: buff.append(i) numExtrapolate.append(''.join(buff)) numExtrapolation=numExtrapolate #just some debugging print statements print(numExtrapolation) print("z:", len(opExtrapolation)) return numExtrapolation, opExtrapolation errors() Any help would be appreciated. Please don't introduce new code that is any more advanced than the code already here. I am looking for a solution to my problem... not large new code segments. Thanks.

    Read the article

  • Problems with Window Functions Wndproc and about

    - by BrianHuangverinem
    I really having problems with this problem ,it would be nice if someone help me on this. Every time I try to build my source file the same errors occur every time for the two window functions CALLBACK Wndproc and CALLBACK About. error: "local function definitions are illegal" Can you tell me what mistake I made? LRESULT CALLBACK WndProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam) { int wmId, wmEvent; PAINTSTRUCT ps; HDC hdc; wmId = LOWORD(wParam); wmEvent = HIWORD(wParam); switch (message) { case WM_COMMAND: // Parse the menu selections: switch (wmId) { case IDM_ABOUT: DialogBox(hInst, MAKEINTRESOURCE(IDD_ABOUTBOX), hWnd, About); break; case IDM_EXIT: DestroyWindow(hWnd); break; default: return DefWindowProc(hWnd, message, wParam, lParam); } break; case WM_PAINT: hdc = BeginPaint(hWnd, &ps); CaptureImage(hWnd); EndPaint(hWnd, &ps); break; case WM_DESTROY: PostQuitMessage(0); break; default: return DefWindowProc(hWnd, message, wParam, lParam); } return 0; } // Message handler for about box. INT_PTR CALLBACK About(HWND hDlg, UINT message, WPARAM wParam, LPARAM lParam) { UNREFERENCED_PARAMETER(lParam); switch (message) { case WM_INITDIALOG: return (INT_PTR)TRUE; case WM_COMMAND: if (LOWORD(wParam) == IDOK || LOWORD(wParam) == IDCANCEL) { EndDialog(hDlg, LOWORD(wParam)); return (INT_PTR)TRUE; } break; } return (INT_PTR)FALSE; }

    Read the article

  • PHP checking/refreashing functions

    - by user1284360
    ok i have a main document that displays a chatbox, what i want is for the chatbox to refreash on everyone who is logged in's screen whenever someone posts a new message... ive tried many methods including sleep timers and new functions that call then sleep and get recalled but this just generates an endless line of the same or little diffrent data making the form unusable until error... this is my code <?php // set error reporting level if (version_compare(phpversion(), "5.3.0", ">=") == 1) error_reporting(E_ALL & ~E_NOTICE & ~E_DEPRECATED); else error_reporting(E_ALL & ~E_NOTICE); require_once('inc/login.inc.php'); require_once('inc/chat.inc.php'); // initialization of login system and generation code $oSimpleLoginSystem = new SimpleLoginSystem(); $oSimpleChat = new SimpleChat(); // draw login box echo $oSimpleLoginSystem->getLoginBox(); // draw chat application $sChatResult = '<font color="0x99000"> <a href="Register_form.html">New Account</a><br> login to send a message<br> or register for a new account</font>'; if ($_COOKIE['member_name'] && $_COOKIE['member_pass']) { if ($oSimpleLoginSystem->check_login($_COOKIE['member_name'], $_COOKIE['member_pass'])) { $sChatResult = ""; if($oSimpleLoginSystem->check_privledges($_COOKIE['member_name']) >= 2) { $sChatResult .= "<br>privledge check Working<br>"; } $sChatResult .= "<form action=$_SERVER[PHP_SELF] method='post'> <input type='hidden' name='foo' value='<?= $foo ?>' /> <input type='submit' name='submit' value='Refresh Messages' /> </form>"; $sChatResult .= $oSimpleChat->acceptMessages(); $sChatResult .= "<br><br>"; $sChatResult .= $oSimpleChat->getMessages(); } } echo $sChatResult; ?>

    Read the article

  • Calling Multiple functions simultaneously

    - by Noob
    I'm trying to call two different functions for two different HTML elements at the same time, but the second function isn't being read at all. I'm also trying to use the id to specify which corresponding elements to grab data from. Here's what I have: function changeImage(id) { var s = document.getElementById('showcase'); var simg = s.getElementsByTagName('img'); var slen = simg.length; for(i=0; i < slen; i++) { simg[i].style.display = 'none'; } $('#' + id).fadeIn('slow', 0); function createComment(jim) { //alert('hello?'); var d = document.getElementById('description'); var dh = document.getElementsByTagName('p'); var dlen = dh.length; //alert(dh); for(i=0; i < dlen; i++) { alert(dh); dh[i].style.display = 'none'; } $('#' + jim).fadeIn('slow', 0); }

    Read the article

  • What are the linkage of the following functions?

    - by Derui Si
    When I was reading the c++ 03 standard (7.1.1 Storage class specifiers [dcl.stc]), there are some examples as below, I'm not able to tell how the linkage of each successive declarations is determined? Could anyone help here? Thanks in advance! static char* f(); // f() has internal linkage char* f() { /* ... */ } // f() still has internal linkage char* g(); // g() has external linkage static char* g() { /* ... */ } // error: inconsistent linkage void h(); inline void h(); // external linkage inline void l(); void l(); // external linkage inline void m(); extern void m(); // external linkage static void n(); inline void n(); // internal linkage static int a; // a has internal linkage int a; // error: two definitions static int b; // b has internal linkage extern int b; // b still has internal linkage int c; // c has external linkage static int c; // error: inconsistent linkage extern int d; // d has external linkage static int d; // error: inconsistent linkage UPD: Additionally, how can I understand the statement in the standard, " The linkages implied by successive declarations for a given entity shall agree. That is, within a given scope, each declaration declaring the same object name or the same overloading of a function name shall imply the same linkage. Each function in a given set of overloaded functions can have a different linkage, however."

    Read the article

  • How to override jquery's show() and hide() functions

    - by Max Williams
    hi all Short version of question: see title Long version of question: I've used jquery's show() and hide() functions extensively in my code and just encountered a bit of a problem: they work by changing the display attribute of the element to 'block' or 'none' respectively, so that if you have somethin that has display: inline and then hide and show it, you've changed its display to block, which screws up the layout in a couple of cases. In my code, whenever i want something to be hidden initially i give it a class 'hidden'. This class is simply {display: none}. I'd like the change show and hide to remove or add this class, instead of directly changing the display attribute, so that if you add the hidden class and then remove it again (ie hide and show something) then it's back to exactly how it was to start off with (since adding a class overrides the attributes rather than directly changing them). Something like this (this is a little pseucodey as i don't know how to set the function up properly - let's assume that 'this' is the object that show/hide was called on) function show(){ this.removeClass("hidden"); } function hide(){ this.addClass("hidden"); } how and where would i go about overriding the jquery methods? (I'm not a javascript expert) thanks - max

    Read the article

  • Javascript object properties access functions in parent constructor?

    - by Bob Spryn
    So I'm using this pretty standard jquery plugin pattern whereby you can grab an api after applying the jquery function to a specific instance. This API is essentially a javascript object with a bunch of methods and data. So I wanted to essentially create some private internal methods for the object only to manipulate data etc, which just doesn't need to be available as part of the API. So I tried this: // API returned with new $.TranslationUI(options, container) $.TranslationUI = function (options, container) { // private function? function monkey(){ console.log("blah blah blah"); } // extend the default settings with the options object passed this.settings = $.extend({},$.TranslationUI.defaultSettings,options); // set a reference for the container dom element this.container = container; // call the init function this.init(); }; The problem I'm running into is that init can't call that function "monkey". I'm not understanding the explanation behind why it can't. Is it because init is a prototype method?($.TranslationUI's prototype is extended with a bunch of methods including init elsewhere in the code) $.extend($.TranslationUI, { prototype: { init : function(){ // doesn't work monkey(); // editing flag this.editing = false; // init event delegates here for // languagepicker $(this.settings.languageSelector, this.container).bind("click", {self: this}, this.selectLanguage); } } }); Any explanations would be helpful. Would love other thoughts on creating private methods with this model too. These particular functions don't HAVE to be in prototype, and I don't NEED private methods protected from being used externally, but I want to know how should I have that requirement in the future.

    Read the article

  • Using enum values to represent binary operators (or functions)

    - by Bears will eat you
    I'm looking for an elegant way to use values in a Java enum to represent operations or functions. My guess is, since this is Java, there just isn't going to be a nice way to do it, but here goes anyway. My enum looks something like this: public enum Operator { LT, LTEQ, EQEQ, GT, GTEQ, NEQ; ... } where LT means < (less than), LTEQ means <= (less than or equal to), etc - you get the idea. Now I want to actually use these enum values to apply an operator. I know I could do this just using a whole bunch of if-statements, but that's the ugly, OO way, e.g.: int a = ..., b = ...; Operator foo = ...; // one of the enum values if (foo == Operator.LT) { return a < b; } else if (foo == Operator.LTEQ) { return a <= b; } else if ... // etc What I'd like to be able to do is cut out this structure and use some sort of first-class function or even polymorphism, but I'm not really sure how. Something like: int a = ..., b = ...; Operator foo = ...; return foo.apply(a, b); or even int a = ..., b = ...; Operator foo = ...; return a foo.convertToOperator() b; But as far as I've seen, I don't think it's possible to return an operator or function (at least, not without using some 3rd-party library). Any suggestions?

    Read the article

  • What's up with this reversing bit order function?

    - by MattyW
    I'm rather ashamed to admit that I don't know as much about bits and bit manipulation as I probably should. I tried to fix that this weekend by writing some 'reverse the order of bits' and 'count the ON bits' functions. I took an example from here but when I implemented it as below, I found I had to be looping while < 29. If I loop while < 32 (as in the example) Then when I try to print the integer (using a printBits function i've written) I seem to be missing the first 3 bits. This makes no sense to me, can someone help me out? int reverse(int n) { int r = 0; int i = 0; for(i = 0; i < 29; i++) { r = (r << 1) + (n & 1); n >>=1; } return r; }

    Read the article

  • JS best practice for member functions

    - by MickMalone1983
    I'm writing a little mobile games library, and I'm not sure the best practice for declaring member functions of instantiated function objects. For instance, I might create a simple object with one property, and a method to print it: function Foo(id){ this.id = id; this.print = function(){ console.log(this.id); }; }; However, a function which does not need access to 'private' members of the function does not need to be declared in the function at all. I could equally have written: function print(){ console.log(this.id); }; function Foo(id){ this.id = id; this.print = print; }; When the function is invoked through an instance of Foo, the instance becomes the context for this, so the output is the same in either case. I'm not entirely sure how memory is allocated with JS, and I can't find anything that I can understand about something this specific, but it seems to me that with the first example all members of Foo, including the print function, are duplicated each time it is instantiated - but with the second, it just gets a pointer to one, pre-declared function, which would save any more memory having to be allocated as more instances of Foo are created. Am I correct, and if I am, is there any memory/performance benefit to doing this?

    Read the article

  • jQuery Hover functions

    - by Banderdash
    Thus far you guys have been wildly helpful with me getting this little ditty working just so. I have one further request: This markup: <div id="themes"> <h2>Research Themes</h2> <ul> <li class="tier_1"><a class="enviro" href="">Learn about our approach to the <strong>environment</strong></a> <ul class="tier_2 hide"> <li><a href=""><em>How we are tying this all together</em></a></li> <li><a href="off.html"><strong>Project:</strong> Solor Powered Biofactories</a></li> <li><a href=""><strong>Project:</strong> Cleaning Water with Nature</a></li> <li><a href=""><strong>Project:</strong> Higher Efficiency Solar Technology</a></li> </ul> </li> <li class="tier_1"><a class="health" href="">Learn about our approach to <strong>human health</strong></a> <ul class="tier_2 hide"> <li><a href="">Project name numero uno goes here</a></li> <li><a href="">Project name numero dos goes here</a></li> <li><a href="">Project name numero tres goes here</a></li> </ul> </li> <li class="tier_1"><a class="defense" href="">Learn about our approach to <strong>national defense</strong></a> <ul class="tier_2 hide"> <li><a href="">Project name numero uno goes here</a></li> <li><a href="">Project name numero dos goes here</a></li> <li><a href="">Project name numero tres goes here</a></li> </ul> </li> </ul> </div><!-- // end themes --> And this jQuery: $(function(){ $(".tier_1 > a").hover(function() { var currentList = jQuery(this).parents('li').find('.tier_2'); $(currentList).slideToggle(); jQuery(this).parents('ul').find('.tier_2').not(currentList).slideUp(); return false; }); }); Create this nifty 'themes' slider you can see working on the right column of this page: http://clients.pixelbleed.net/biodesign/ I have two problems with it...The hover retracts the slideUp/down when you hit one of the links under a tier_2 ul. I'd like it to remain slideout as someone hovers the nested li's. So the slide should only happen on hover for the tier_1 elements. Also I would like, on hover to add an "active" class to the a element on the tier_1 links. So [a class="enviro"..] would, on hover, become [a class="enviro active"]. This is then removed when one of the other tier_1 items is hovered. This way the pretty color icon can stay visible while someone looks at the nested elements. Not even sure all that is possible with hover, but I figured if anyone would know a way it would be here.

    Read the article

  • Window z-ordering in java

    - by Aaron
    Is there a way to manage the window z-ordering of JDialog windows within java? I would like to able to assign each window to a layer such that windows on lower layers can never go above and obscure windows on higher layers. Even when they have focus. Similar to the Z-order capability that exists for components but for JDialog windows. The solution does not need to work across all OSes. A linux specific solution is acceptable.

    Read the article

  • Problems Allocating Objects of Derived Class Where Base Class has Abstract Virtual Functions

    - by user1743901
    I am trying to get this Zombie/Human agent based simulation running, but I am having problems with these derived classes (Human and Zombie) who have parent class "Creature". I have 3 virtual functions declared in "Creature" and all three of these are re-declared AND DEFINED in both "Human" and "Zombie". But for some reason when I have my program call "new" to allocate memory for objects of type Human or Zombie, it complains about the virtual functions being abstract. Here's the code: definitions.h #ifndef definitions_h #define definitions_h class Creature; class Item; class Coords; class Grid { public: Creature*** cboard; Item*** iboard; int WIDTH; int HEIGHT; Grid(int WIDTHVALUE, int HEIGHTVALUE); void FillGrid(); //initializes grid object with humans and zombies void Refresh(); //calls Creature::Die(),Move(),Attack(),Breed() on every square void UpdateBuffer(char** buffer); bool isEmpty(int startx, int starty, int dir); char CreatureType(int xcoord, int ycoord); char CreatureType(int startx, int starty, int dir); }; class Random { public: int* rptr; void Print(); Random(int MIN, int MAX, int LEN); ~Random(); private: bool alreadyused(int checkthis, int len, int* rptr); bool isClean(); int len; }; class Coords { public: int x; int y; int MaxX; int MaxY; Coords() {x=0; y=0; MaxX=0; MaxY=0;} Coords(int X, int Y, int WIDTH, int HEIGHT) {x=X; y=Y; MaxX=WIDTH; MaxY=HEIGHT; } void MoveRight(); void MoveLeft(); void MoveUp(); void MoveDown(); void MoveUpRight(); void MoveUpLeft(); void MoveDownRight(); void MoveDownLeft(); void MoveDir(int dir); void setx(int X) {x=X;} void sety(int Y) {y=Y;} }; class Creature { public: bool alive; Coords Location; char displayletter; Creature() {Location.x=0; Location.y=0;} Creature(int i, int j) {Location.setx(i); Location.sety(j);} virtual void Attack() =0; virtual void AttackCreature(Grid G, int attackdirection) =0; virtual void Breed() =0; void Die(); void Move(Grid G); int DecideSquare(Grid G); void MoveTo(Grid G, int dir); }; class Human : public Creature { public: bool armed; //if armed, chances of winning fight increased for next fight bool vaccinated; //if vaccinated, no chance of getting infected int bitecount; //if a human is bitten, bite count is set to a random number int breedcount; //if a human goes x steps without combat, will breed if next to a human int starvecount; //if a human does not eat in x steps, will die Human() {displayletter='H';} Human(int i, int j) {displayletter='H';} void Attack(Grid G); void AttackCreature(Grid G, int attackdirection); void Breed(Grid G); //will breed after x steps and next to human int DecideAttack(Grid G); }; class Zombie : public Creature { public: Zombie() {displayletter='Z';} Zombie(int i, int j) {displayletter='Z';} void Attack(Grid G); void AttackCreature(Grid G, int attackdirection); void Breed() {} //does nothing int DecideAttack(Grid G); void AttackCreature(Grid G, int attackdirection); }; class Item { }; #endif definitions.cpp #include <cstdlib> #include "definitions.h" Random::Random(int MIN, int MAX, int LEN) //constructor { len=LEN; rptr=new int[LEN]; //allocate array of given length for (int i=0; i<LEN; i++) { int random; do { random = rand() % (MAX-MIN+1) + MIN; } while (alreadyused(random,LEN,rptr)); rptr[i]=random; } } bool Random::alreadyused(int checkthis, int len, int* rptr) { for (int i=0; i<len; i++) { if (rptr[i]==checkthis) return 1; } return 0; } Random::~Random() { delete rptr; } Grid::Grid(int WIDTHVALUE, int HEIGHTVALUE) { WIDTH = WIDTHVALUE; HEIGHT = HEIGHTVALUE; //builds 2d array of creature pointers cboard = new Creature**[WIDTH]; for(int i=0; i<WIDTH; i++) { cboard[i] = new Creature*[HEIGHT]; } //builds 2d array of item pointers iboard = new Item**[WIDTH]; for (int i=0; i<WIDTH; i++) { iboard[i] = new Item*[HEIGHT]; } } void Grid::FillGrid() { /* For each creature pointer in grid, randomly selects whether to initalize as zombie, human, or empty square. This methodology can be changed to initialize different creature types with different probabilities */ int random; for (int i=0; i<WIDTH; i++) { for (int j=0; j<HEIGHT; j++) { Random X(1,100,1); //create a single random integer from [1,100] at X.rptr random=*(X.rptr); if (random < 20) cboard[i][j] = new Human(i,j); else if (random < 40) cboard[i][j] = new Zombie(i,j); else cboard[i][j] = NULL; } } //at this point every creature pointer should be pointing to either //a zombie, human, or NULL with varying probabilities } void Grid::UpdateBuffer(char** buffer) { for (int i=0; i<WIDTH; i++) { for (int j=0; j<HEIGHT; j++) { if (cboard[i][j]) buffer[i][j]=cboard[i][j]->displayletter; else buffer[i][j]=' '; } } } bool Grid::isEmpty(int startx, int starty, int dir) { Coords StartLocation(startx,starty,WIDTH,HEIGHT); switch(dir) { case 1: StartLocation.MoveUp(); if (cboard[StartLocation.x][StartLocation.y]) return 0; case 2: StartLocation.MoveUpRight(); if (cboard[StartLocation.x][StartLocation.y]) return 0; case 3: StartLocation.MoveRight(); if (cboard[StartLocation.x][StartLocation.y]) return 0; case 4: StartLocation.MoveDownRight(); if (cboard[StartLocation.x][StartLocation.y]) return 0; case 5: StartLocation.MoveDown(); if (cboard[StartLocation.x][StartLocation.y]) return 0; case 6: StartLocation.MoveDownLeft(); if (cboard[StartLocation.x][StartLocation.y]) return 0; case 7: StartLocation.MoveLeft(); if (cboard[StartLocation.x][StartLocation.y]) return 0; case 8: StartLocation.MoveUpLeft(); if (cboard[StartLocation.x][StartLocation.y]) return 0; } return 1; } char Grid::CreatureType(int xcoord, int ycoord) { if (cboard[xcoord][ycoord]) //if there is a creature at location xcoord,ycoord return (cboard[xcoord][ycoord]->displayletter); else //if pointer at location xcoord,ycoord is null, return null char return '\0'; } char Grid::CreatureType(int startx, int starty, int dir) { Coords StartLocation(startx,starty,WIDTH,HEIGHT); switch(dir) { case 1: StartLocation.MoveUp(); if (cboard[StartLocation.x][StartLocation.y]) return (cboard[StartLocation.x][StartLocation.y]->displayletter); case 2: StartLocation.MoveUpRight(); if (cboard[StartLocation.x][StartLocation.y]) return (cboard[StartLocation.x][StartLocation.y]->displayletter); case 3: StartLocation.MoveRight(); if (cboard[StartLocation.x][StartLocation.y]) return (cboard[StartLocation.x][StartLocation.y]->displayletter); case 4: StartLocation.MoveDownRight(); if (cboard[StartLocation.x][StartLocation.y]) return (cboard[StartLocation.x][StartLocation.y]->displayletter); case 5: StartLocation.MoveDown(); if (cboard[StartLocation.x][StartLocation.y]) return (cboard[StartLocation.x][StartLocation.y]->displayletter); case 6: StartLocation.MoveDownLeft(); if (cboard[StartLocation.x][StartLocation.y]) return (cboard[StartLocation.x][StartLocation.y]->displayletter); case 7: StartLocation.MoveLeft(); if (cboard[StartLocation.x][StartLocation.y]) return (cboard[StartLocation.x][StartLocation.y]->displayletter); case 8: StartLocation.MoveUpLeft(); if (cboard[StartLocation.x][StartLocation.y]) return (cboard[StartLocation.x][StartLocation.y]->displayletter); } //if function hasn't returned by now, square being looked at is pointer to null return '\0'; //return null char } void Coords::MoveRight() {(x==MaxX)? (x=0):(x++);} void Coords::MoveLeft() {(x==0)? (x=MaxX):(x--);} void Coords::MoveUp() {(y==0)? (y=MaxY):(y--);} void Coords::MoveDown() {(y==MaxY)? (y=0):(y++);} void Coords::MoveUpRight() {MoveUp(); MoveRight();} void Coords::MoveUpLeft() {MoveUp(); MoveLeft();} void Coords::MoveDownRight() {MoveDown(); MoveRight();} void Coords::MoveDownLeft() {MoveDown(); MoveLeft();} void Coords::MoveDir(int dir) { switch(dir) { case 1: MoveUp(); break; case 2: MoveUpRight(); break; case 3: MoveRight(); break; case 4: MoveDownRight(); break; case 5: MoveDown(); break; case 6: MoveDownLeft(); break; case 7: MoveLeft(); break; case 8: MoveUpLeft(); break; case 0: break; } } void Creature::Move(Grid G) { int movedir=DecideSquare(G); MoveTo(G,movedir); } int Creature::DecideSquare(Grid G) { Random X(1,8,8); //X.rptr now points to 8 unique random integers from [1,8] for (int i=0; i<8; i++) { int dir=X.rptr[i]; if (G.isEmpty(Location.x,Location.y,dir)) return dir; } return 0; } void Creature::MoveTo(Grid G, int dir) { Coords OldLocation=Location; Location.MoveDir(dir); G.cboard[Location.x][Location.y]=this; //point new location to this creature G.cboard[OldLocation.x][OldLocation.y]=NULL; //point old location to NULL } void Creature::Die() { if (!alive) { delete this; this=NULL; } } void Human::Breed(Grid G) { if (!breedcount) { Coords BreedLocation=Location; Random X(1,8,8); for (int i=0; i<8; i++) { BreedLocation.MoveDir(X.rptr[i]); if (!G.cboard[BreedLocation.x][BreedLocation.y]) { G.cboard[BreedLocation.x][BreedLocation.y])=new Human(BreedLocation.x,BreedLocation.y); return; } } } } int Human::DecideAttack(Grid G) { Coords AttackLocation=Location; Random X(1,8,8); int attackdir; for (int i=0; i<8; i++) { attackdir=X.rptr[i]; switch(G.CreatureType(Location.x,Location.y,attackdir)) { case 'H': break; case 'Z': return attackdir; case '\0': break; default: break; } } return 0; //no zombies! } int AttackRoll(int para1, int para2) { //outcome 1: Zombie wins, human dies //outcome 2: Human wins, zombie dies //outcome 3: Human wins, zombie dies, but human is bitten Random X(1,100,1); int roll= *(X.rptr); if (roll < para1) return 1; else if (roll < para2) return 2; else return 3; } void Human::AttackCreature(Grid G, int attackdirection) { Coords AttackLocation=Location; AttackLocation.MoveDir(attackdirection); int para1=33; int para2=33; if (vaccinated) para2=101; //makes attackroll > para 2 impossible, never gets infected if (armed) para1-=16; //reduces chance of zombie winning fight int roll=AttackRoll(para1,para2); //outcome 1: Zombie wins, human dies //outcome 2: Human wins, zombie dies //outcome 3: Human wins, zombie dies, but human is bitten switch(roll) { case 1: alive=0; //human (this) dies return; case 2: G.cboard[AttackLocation.x][AttackLocation.y]->alive=0; return; //zombie dies case 3: G.cboard[AttackLocation.x][AttackLocation.y]->alive=0; //zombie dies Random X(3,7,1); //human is bitten bitecount=*(X.rptr); return; } } int Zombie::DecideAttack(Grid G) { Coords AttackLocation=Location; Random X(1,8,8); int attackdir; for (int i=0; i<8; i++) { attackdir=X.rptr[i]; switch(G.CreatureType(Location.x,Location.y,attackdir)) { case 'H': return attackdir; case 'Z': break; case '\0': break; default: break; } } return 0; //no zombies! } void Zombie::AttackCreature(Grid G, int attackdirection) { int reversedirection; if (attackdirection < 9 && attackdirection>0) { (attackdirection<5)? (reversedirection=attackdirection+4):(reversedirection=attackdirection-4); } else reversedirection=0; //this should never happen //when a zombie attacks a human, the Human::AttackZombie() function is called //in the "reverse" direction, utilizing that function that has already been written Coords ZombieLocation=Location; Coords HumanLocation=Location; HumanLocation.MoveDir(attackdirection); if (G.cboard[HumanLocation.x][HumanLocation.y]) //if there is a human there, which there should be G.cboard[HumanLocation.x][HumanLocation.y]->AttackCreature(G,reversedirection); } void Zombie::Attack(Grid G) { int attackdirection=DecideAttack(G); AttackCreature(G,attackdirection); } main.cpp #include <cstdlib> #include <iostream> #include "definitions.h" using namespace std; int main(int argc, char *argv[]) { Grid G(500,500); system("PAUSE"); return EXIT_SUCCESS; }

    Read the article

  • SQL SERVER – SSMS Automatically Generates TOP (100) PERCENT in Query Designer

    - by pinaldave
    Earlier this week, I was surfing various SQL forums to see what kind of help developer need in the SQL Server world. One of the question indeed caught my attention. I am here regenerating complete question as well scenario to illustrate the point in a precise manner. Additionally, I have added added second part of the question to give completeness. Question: I am trying to create a view in Query Designer (not in the New Query Window). Every time I am trying to create a view it always adds  TOP (100) PERCENT automatically on the T-SQL script. No matter what I do, it always automatically adds the TOP (100) PERCENT to the script. I have attempted to copy paste from notepad, build a query and a few other things – there is no success. I am really not sure what I am doing wrong with Query Designer. Here is my query script: (I use AdventureWorks as a sample database) SELECT Person.Address.AddressID FROM Person.Address INNER JOIN Person.AddressType ON Person.Address.AddressID = Person.AddressType.AddressTypeID ORDER BY Person.Address.AddressID This script automatically replaces by following query: SELECT TOP (100) PERCENT Person.Address.AddressID FROM Person.Address INNER JOIN Person.AddressType ON Person.Address.AddressID = Person.AddressType.AddressTypeID ORDER BY Person.Address.AddressID However, when I try to do the same from New Query Window it works totally fine. However, when I attempt to create a view of the same query it gives following error. Msg 1033, Level 15, State 1, Procedure myView, Line 6 The ORDER BY clause is invalid in views, inline functions, derived tables, subqueries, and common table expressions, unless TOP, OFFSET or FOR XML is also specified. It is pretty clear to me now that the script which I have written seems to need TOP (100) PERCENT, so Query . Why do I need it? Is there any work around to this issue. I particularly find this question pretty interesting as it really touches the fundamentals of the T-SQL query writing. Please note that the query which is automatically changed is not in New Query Editor but opened from SSMS using following way. Database >> Views >> Right Click >> New View (see the image below) Answer: The answer to the above question can be very long but I will keep it simple and to the point. There are three things to discuss in above script 1) Reason for Error 2) Reason for Auto generates TOP (100) PERCENT and 3) Potential solutions to the above error. Let us quickly see them in detail. 1) Reason for Error The reason for error is already given in the error. ORDER BY is invalid in the views and a few other objects. One has to use TOP or other keywords along with it. The way semantics of the query works where optimizer only follows(honors) the ORDER BY in the same scope or the same SELECT/UPDATE/DELETE statement. There is a possibility that one can order after the scope of the view again the efforts spend to order view will be wasted. The final resultset of the query always follows the final ORDER BY or outer query’s order and due to the same reason optimizer follows the final order of the query and not of the views (as view will be used in another query for further processing e.g. in SELECT statement). Due to same reason ORDER BY is now allowed in the view. For further accuracy and clear guidance I suggest you read this blog post by Query Optimizer Team. They have explained it very clear manner the same subject. 2) Reason for Auto Generated TOP (100) PERCENT One of the most popular workaround to above error is to use TOP (100) PERCENT in the view. Now TOP (100) PERCENT allows user to use ORDER BY in the query and allows user to overcome above error which we discussed. This gives the impression to the user that they have resolved the error and successfully able to use ORDER BY in the View. Well, this is incorrect as well. The way this works is when TOP (100) PERCENT is used the result is not guaranteed as well it is ignored in our the query where the view is used. Here is the blog post on this subject: Interesting Observation – TOP 100 PERCENT and ORDER BY. Now when you create a new view in the SSMS and build a query with ORDER BY to avoid the error automatically it adds the TOP 100 PERCENT. Here is the connect item for the same issue. I am sure there will be more connect items as well but I could not find them. 3) Potential Solutions If you are reading this post from the beginning in that case, it is clear by now that ORDER BY should not be used in the View as it does not serve any purpose unless there is a specific need of it. If you are going to use TOP 100 PERCENT with ORDER BY there is absolutely no need of using ORDER BY rather avoid using it all together. Here is another blog post of mine which describes the same subject ORDER BY Does Not Work – Limitation of the Views Part 1. It is valid to use ORDER BY in a view if there is a clear business need of using TOP with any other percentage lower than 100 (for example TOP 10 PERCENT or TOP 50 PERCENT etc). In most of the cases ORDER BY is not needed in the view and it should be used in the most outer query for present result in desired order. User can remove TOP 100 PERCENT and ORDER BY from the view before using the view in any query or procedure. In the most outer query there should be ORDER BY as per the business need. I think this sums up the concept in a few words. This is a very long topic and not easy to illustrate in one single blog post. I welcome your comments and suggestions. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, SQL View, T SQL, Technology

    Read the article

  • Sort List C# in arbitrary order

    - by Jasper
    I have a C# List I.E. List<Food> x = new List<Food> () ; This list is populated with this class Public class Food { public string id { get; set; } public string idUser { get; set; } public string idType { get; set; } //idType could be Fruit , Meat , Vegetable , Candy public string location { get; set; } } Now i have this unsorted List<Food> list ; which has I.E. 15 elements. There are 8 Vegetable Types , 3 Fruit Types , 1 Meat Types , 1 Candy Types I would sort this so that to have a list ordered in this way : 1° : Food.idType Fruit 2° : Food.idType Vegetables 3° : Food.idType Meat 4° : Food.idType Candy 5° : Food.idType Fruit 6° : Food.idType Vegetables 7° : Food.idType Fruit //Becouse there isnt more Meat so i insert the //next one which is Candy but also this type is empty //so i start from begin : Fruit 8° : Food.idType Vegetables 9° : Food.idType Vegetables // For the same reason of 7° 10 ° Food.idType Vegetables ...... .... .... 15 : Food.idType Vegetables I cant find a rule to do this. Is there a linq or List.Sort instruction which help me to order the list in this way? Update i changed the return value of idType and now return int type instead string so 1=Vegetable , 2=Fruit , 3=Candy 4=Meat

    Read the article

  • Importing Conditionally Compiled Functions From a Perl Module

    - by Robert S. Barnes
    I have a set of logging and debugging functions which I want to use across multiple modules / objects. I'd like to be able to turn them on / off globally using a command line switch. The following code does this, however, I would like to be able to omit the package name and keep everything in a single file. This is related to two previous questions I asked, here and here. #! /usr/bin/perl -w use strict; use Getopt::Long; { package LogFuncs; use threads; use Time::HiRes qw( gettimeofday ); # provide tcpdump style time stamp sub _gf_time { my ( $seconds, $microseconds ) = gettimeofday(); my @time = localtime($seconds); return sprintf( "%02d:%02d:%02d.%06ld", $time[2], $time[1], $time[0], $microseconds ); } sub logerr; sub compile { my %params = @_; *logerr = $params{do_logging} ? sub { my $msg = shift; warn _gf_time() . " Thread " . threads->tid() . ": $msg\n"; } : sub { }; } } { package FooObj; sub new { my $class = shift; bless {}, $class; }; sub foo_work { my $self = shift; # do some foo work LogFuncs::logerr($self); } } { package BarObj; sub new { my $class = shift; my $data = { fooObj => FooObj->new() }; bless $data, $class; } sub bar_work { my $self = shift; $self->{fooObj}->foo_work(); LogFuncs::logerr($self); } } my $do_logging = 0; GetOptions( "do_logging" => \$do_logging, ); LogFuncs::compile(do_logging => $do_logging); my $bar = BarObj->new(); LogFuncs::logerr("Created $bar"); $bar->bar_work();

    Read the article

  • C# Wholesale Order form - textboxes in Gridviews in Repeater

    - by tnriverfish
    I'm building a wholesale order form on a website. The current plan is to... -get an ArrayList of DepartmentUnits -a DepartmentUnit has various attributes like "deptId", "description" and its own ArrayList of StoreItems -The StoreItems have attached ArrayList of various SizeOptions -The SizeOptions have an inventory count integer along with their description -Planning on putting an asp:Repeater on the page that has an asp:GridView in it -Each DepartmentUnit will have its own GridView -EachStore item will have a row in the GridView -Each SizeOption will have a TextBox in the row (approximately 10 options) -Each inventory count will be watermarked over the size option textbox The question becomes how will I then collect all this information correctly once the form has been filled out? I don't like the idea of putting all this information in an update panel and then posting back each time a GridView row or worse one of the row's textboxes changes. Any advice on putting a single save button on the page and looping through each Repeater item - and each GridViewRow - and each textbox - to get all the values entered? Better to try collecting all the items added in a single table at the bottom of the page and updating the string with jquery each time a text box is modified? Then just looping through the new table when saved? Not sure I know how to loop through that table though - updating if quantity is changed might be a bear too. If it considerably simplifies the process I could just remove the Repeater aspect and put separate GridViews on separate pages. Thanks!

    Read the article

  • Strange rare out-of-order data received using Indy

    - by Jim
    We're having a bizarre problem with Indy10 where two large strings (a few hundred characters each) that we send out one after the other are appearing at the other end intertwined oddly. This happens extremely infrequently. Each string is a complete XML message terminated with a LF and in general the READ process reads an entire XML message, returning when it sees the LF. The call to actually send the message is protected by a critical section around the call to the IOHandler's writeln method and so it is not possible for two threads to send at the same time. (We're certain the critical section is implemented/working properly). This problem happens very rarely. The symptoms are odd...when we send string A followed by string B what we received at the other end (on the rare occasions where we have failure) is the trailing section of string A by itself (i.e., there's a LF at the end of it) followed by the leading section of string A and then the entire string B followed by a single LF. We've verified that the "timed out" property is not true after the partial read - we log that property after every read that returns content. Also, we know there are no embedded LF characters in the string, as we explicitly replace all non-alphanumeric characters in the string with spaces before appending the LF and sending it. We have log mechanisms inside the critical sections on both the transmission and receiving ends and so we can see this behavior at the "wire". We're completely baffled and wondering (although always the lowest possibility) whether there could be some low-level Indy issues that might cause this issue, e.g., buffers being sent in the wrong order....very hard to believe this could be the issue but we're grasping at straws. Does anyone have any bright ideas?

    Read the article

  • Django forms, inheritance and order of form fields

    - by Hannson
    I'm using Django forms in my website and would like to control the order of the fields. Here's how I define my forms: class edit_form(forms.Form): summary = forms.CharField() description = forms.CharField(widget=forms.TextArea) class create_form(edit_form): name = forms.CharField() The name is immutable and should only be listed when the entity is created. I use inheritance to add consistency and DRY principles. What happens which is not erroneous, in fact totally expected, is that the name field is listed last in the view/html but I'd like the name field to be on top of summary and description. I do realize that I could easily fix it by copying summary and description into create_form and loose the inheritance but I'd like to know if this is possible. Why? Imagine you've got 100 fields in edit_form and have to add 10 fields on the top in create_form - copying and maintaining the two forms wouldn't look so sexy then. (This is not my case, I'm just making up an example) So, how can I override this behavior? Edit: Apparently there's no proper way to do this without going through nasty hacks (fiddling with .field attribute). The .field attribute is a SortedDict (one of Django's internal datastructures) which doesn't provide any way to reorder key:value pairs. It does how-ever provide a way to insert items at a given index but that would move the items from the class members and into the constructor. This method would work, but make the code less readable. The only other way I see fit is to modify the framework itself which is less-than-optimal in most situations. In short the code would become something like this: class edit_form(forms.Form): summary = forms.CharField() description = forms.CharField(widget=forms.TextArea) class create_form(edit_form): def __init__(self,*args,**kwargs): forms.Form.__init__(self,*args,**kwargs) self.fields.insert(0,'name',forms.CharField()) That shut me up :)

    Read the article

  • Average of two strings in alphabetical/lexicographical order

    - by Bemmu
    Suppose you take the strings 'a' and 'z' and list all the strings that come between them in alphabetical order: ['a','b','c' ... 'x','y','z']. Take the midpoint of this list and you find 'm'. So this is kind of like taking an average of those two strings. You could extend it to strings with more than one character, for example the midpoint between 'aa' and 'zz' would be found in the middle of the list ['aa', 'ab', 'ac' ... 'zx', 'zy', 'zz']. Might there be a Python method somewhere that does this? If not, even knowing the name of the algorithm would help. I began making my own routine that simply goes through both strings and finds midpoint of the first differing letter, which seemed to work great in that 'aa' and 'az' midpoint was 'am', but then it fails on 'cat', 'doggie' midpoint which it thinks is 'c'. I tried Googling for "binary search string midpoint" etc. but without knowing the name of what I am trying to do here I had little luck.

    Read the article

  • Marshalling a big-endian byte collection into a struct in order to pull out values

    - by Pat
    There is an insightful question about reading a C/C++ data structure in C# from a byte array, but I cannot get the code to work for my collection of big-endian (network byte order) bytes. (EDIT: Note that my real struct has more than just one field.) Is there a way to marshal the bytes into a big-endian version of the structure and then pull out the values in the endianness of the framework (that of the host, which is usually little-endian)? This should summarize what I'm looking for (LE=LittleEndian, BE=BigEndian): void Main() { var leBytes = new byte[] {1, 0}; var beBytes = new byte[] {0, 1}; Foo fooLe = ByteArrayToStructure<Foo>(leBytes); Foo fooBe = ByteArrayToStructureBigEndian<Foo>(beBytes); Assert.AreEqual(fooLe, fooBe); } [StructLayout(LayoutKind.Explicit, Size=2)] public struct Foo { [FieldOffset(0)] public ushort firstUshort; } T ByteArrayToStructure<T>(byte[] bytes) where T: struct { GCHandle handle = GCHandle.Alloc(bytes, GCHandleType.Pinned); T stuff = (T)Marshal.PtrToStructure(handle.AddrOfPinnedObject(),typeof(T)); handle.Free(); return stuff; } T ByteArrayToStructureBigEndian<T>(byte[] bytes) where T: struct { ??? }

    Read the article

  • optimizing an sql query using inner join and order by

    - by Sergio B
    I'm trying to optimize the following query without success. Any idea where it could be indexed to prevent the temporary table and the filesort? EXPLAIN SELECT SQL_NO_CACHE `groups`.* FROM `groups` INNER JOIN `memberships` ON `groups`.id = `memberships`.group_id WHERE ((`memberships`.user_id = 1) AND (`memberships`.`status_code` = 1 AND `memberships`.`manager` = 0)) ORDER BY groups.created_at DESC LIMIT 5;` +----+-------------+-------------+--------+--------------------------+---------+---------+---------------------------------------------+------+----------------------------------------------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +----+-------------+-------------+--------+--------------------------+---------+---------+---------------------------------------------+------+----------------------------------------------+ | 1 | SIMPLE | memberships | ref | grp_usr,grp,usr,grp_mngr | usr | 5 | const | 5 | Using where; Using temporary; Using filesort | | 1 | SIMPLE | groups | eq_ref | PRIMARY | PRIMARY | 4 | sportspool_development.memberships.group_id | 1 | | +----+-------------+-------------+--------+--------------------------+---------+---------+---------------------------------------------+------+----------------------------------------------+ 2 rows in set (0.00 sec) +--------+------------+-----------------------------------+--------------+-----------------+-----------+-------------+----------+--------+------+------------+---------+ | Table | Non_unique | Key_name | Seq_in_index | Column_name | Collation | Cardinality | Sub_part | Packed | Null | Index_type | Comment | +--------+------------+-----------------------------------+--------------+-----------------+-----------+-------------+----------+--------+------+------------+---------+ | groups | 0 | PRIMARY | 1 | id | A | 6 | NULL | NULL | | BTREE | | | groups | 1 | index_groups_on_name | 1 | name | A | 6 | NULL | NULL | YES | BTREE | | | groups | 1 | index_groups_on_privacy_setting | 1 | privacy_setting | A | 6 | NULL | NULL | YES | BTREE | | | groups | 1 | index_groups_on_created_at | 1 | created_at | A | 6 | NULL | NULL | YES | BTREE | | | groups | 1 | index_groups_on_id_and_created_at | 1 | id | A | 6 | NULL | NULL | | BTREE | | | groups | 1 | index_groups_on_id_and_created_at | 2 | created_at | A | 6 | NULL | NULL | YES | BTREE | | +--------+------------+-----------------------------------+--------------+-----------------+-----------+-------------+----------+--------+------+------------+---------+ +-------------+------------+----------------------------------------------------------+--------------+-------------+-----------+-------------+----------+--------+------+------------+---------+ | Table | Non_unique | Key_name | Seq_in_index | Column_name | Collation | Cardinality | Sub_part | Packed | Null | Index_type | Comment | +-------------+------------+----------------------------------------------------------+--------------+-------------+-----------+-------------+----------+--------+------+------------+---------+ | memberships | 0 | PRIMARY | 1 | id | A | 2 | NULL | NULL | | BTREE | | | memberships | 0 | grp_usr | 1 | group_id | A | 2 | NULL | NULL | YES | BTREE | | | memberships | 0 | grp_usr | 2 | user_id | A | 2 | NULL | NULL | YES | BTREE | | | memberships | 1 | grp | 1 | group_id | A | 2 | NULL | NULL | YES | BTREE | | | memberships | 1 | usr | 1 | user_id | A | 2 | NULL | NULL | YES | BTREE | | | memberships | 1 | grp_mngr | 1 | group_id | A | 2 | NULL | NULL | YES | BTREE | | | memberships | 1 | grp_mngr | 2 | manager | A | 2 | NULL | NULL | YES | BTREE | | | memberships | 1 | complex_index | 1 | group_id | A | 2 | NULL | NULL | YES | BTREE | | | memberships | 1 | complex_index | 2 | user_id | A | 2 | NULL | NULL | YES | BTREE | | | memberships | 1 | complex_index | 3 | status_code | A | 2 | NULL | NULL | YES | BTREE | | | memberships | 1 | complex_index | 4 | manager | A | 2 | NULL | NULL | YES | BTREE | | | memberships | 1 | index_memberships_on_user_id_and_status_code_and_manager | 1 | user_id | A | 2 | NULL | NULL | YES | BTREE | | | memberships | 1 | index_memberships_on_user_id_and_status_code_and_manager | 2 | status_code | A | 2 | NULL | NULL | YES | BTREE | | | memberships | 1 | index_memberships_on_user_id_and_status_code_and_manager | 3 | manager | A | 2 | NULL | NULL | YES | BTREE | | +-------------+------------+----------------------------------------------------------+--------------+-------------+-----------+-------------+----------+--------+------+------------+---------+

    Read the article

  • Jquery .html() function returns html out of nested order

    - by forcripesake
    I have a method which returns a persisted html template from a database. The template is of the format: <div id="item_collection"> <div id="item_x"> <p id="item_x_headline"><h2>Some Headline</h2></p> <p id="item_x_excerpt>Some text here</p> </div> <div id="item_x+1"> <p id="item_x+1_headline"><h1>Some Headline</h1></p> <p id="item_x+1_excerpt>Some text here</p> </div> ...and so on. </div> However after I run the following: alert(data); //check that the template is in order. It Is. $('#template_area').html(data); the Html is now: <div id="item_collection"> <div id="item_x"> <p id="item_x_headline"></p> <!--Note The Lack of Nesting --> <h2>Some Headline</h2> <p id="item_x_excerpt>Some text here</p> </div> <div id="item_x+1"> <p id="item_x+1_headline"></p> <!--Note The Lack of Nesting --> <h1>Some Headline</h1> <p id="item_x+1_excerpt>Some text here</p> </div> ...and so on. </div> So what gives? Is there a better way to replace the empty template_area's content than the .html() method?

    Read the article

  • Java3D: Problem with order of objects that have a transparent PNG texture

    - by Sebastian
    Hello! Today I tried to program a little fish tank with Java 3D. The fish tank rotates and fishes are placed in it. The fishes in the box are Java 3D Boxes with a PNG picture that has an alpha channel. Without activated transparency the order of the objects is correct. But when I enable it, some fishes in the back come to the front what looks really wrong. I tried NICEST, FASTEST and BLENDED as Transparency Options but I had no effort. Does someone know what the problem could be? Vector3f[] posf = new Vector3f[5]; posf[0] = new Vector3f(-0.22f, -0.1f, -0.2f); posf[1] = new Vector3f(-0.34f, 0.1f, 0.2f); posf[2] = new Vector3f(0.3f, -0.2f, 0.3f); Appearance fischapp = new Appearance(); fischapp.setTransparencyAttributes(new TransparencyAttributes(TransparencyAttributes.NICEST, 1f)); try { fischapp.setTexture(new TextureLoader(ImageIO.read(new File("nemo.png")), this).getTexture()); } catch(IOException exc) { System.out.println(exc.getMessage()); } for(int i = 0; i Thank you!

    Read the article

  • Average of two strings in alphabetical order

    - by Bemmu
    Suppose you take the strings 'a' and 'z' and list all the strings that come between them in alphabetical order: ['a','b','c' ... 'x','y','z']. Take the midpoint of this list and you find 'm'. So this is kind of like taking an average of those two strings. You could extend it to strings with more than one character, for example the midpoint between 'aa' and 'zz' would be found in the middle of the list ['aa', 'ab', 'ac' ... 'zx', 'zy', 'zz']. Might there be a Python method somewhere that does this? If not, even knowing the name of the algorithm would help. I began making my own routine that simply goes through both strings and finds midpoint of the first differing letter, which seemed to work great in that 'aa' and 'az' midpoint was 'am', but then it fails on 'cat', 'doggie' midpoint which it thinks is 'c'. Rather than invent a method I thought it better to ask. I tried Googling for "binary search string midpoint" etc. but without knowing the name of what I am trying to do here I had little luck.

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >